Canon imageRUNNER 1740i
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A4
Скорость печати
A4
40
Цветность печати
черно-белая
Общие характеристики |
|
---|---|
Макс. формат |
A4 |
Тип устройства |
МФУ |
Телефон |
|
Факс |
|
Копир |
|
Сканер |
|
Печать фотографий |
|
Размещение |
напольный |
Цветность печати |
|
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Принтер |
|
Время разогрева |
30 |
Пигментные чернила |
|
Печать без полей |
|
Прямая печать |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
По X | 1 200 |
По Y | 1 200 |
Скорость ч/б печати |
|
A4 | 40 |
Копир |
|
Время выхода первой копии |
5 |
Макс, количество копий за цикл |
999 |
Шаг масштабирования |
0,01 |
Значение масштаба |
|
Минимальное | 0,25 |
Максимальное | 4 |
Макс, разрешение (ч/б) |
|
По Y | 600 |
По X | 600 |
Скорость ч/б копирования |
|
A3 | 15 |
Сканер |
|
Макс. формат оригинала |
A4 |
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Тип сканера |
планшетный/протяжный |
Емкость устройства автоподачи оригиналов |
50 |
Устройство автоподачи оригиналов |
двустороннее |
Макс, размер сканирования |
|
По X | 216 |
По Y | 356 |
Разрешение сканера |
|
По Х | 600 |
Скорость сканирования |
|
Ч/б | 50 |
Цветн, | 50 |
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
15 100 |
Количество картриджей |
1 |
Печать на: |
|
Этикетках | |
Глянцевой бумаге | |
Карточках | |
Пленках | |
CD/DVD | |
Конвертах | |
Рулоне | |
Матовой бумаге | |
Фотобумаге | |
Плотность бумаги |
|
Минимальная | 64 |
Максимальная | 128 |
Факс |
|
Цветной |
|
Телефон |
|
Caller ID |
|
Беспроводная трубка |
|
Проводная трубка |
|
АОН |
|
Спикерфон |
|
Стандарт DECT |
|
Автоответчик |
|
Шрифты и языки управления |
|
Языки управления |
|
PCL 6 | |
PCL 5e | |
PPDS | |
PostScript 2 | |
PCL 5c | |
PostScript | |
PostScript 3 | |
Количество установленных шрифтов |
|
PostScript | 136 |
PCL | 93 |
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
Максимальная | 2 300 |
Стандартная | 650 |
Вывод бумаги |
|
Стандартный | 250 |
Финишер |
|
Степлер |
|
Брошюровщик |
|
Сортер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Wi-Fi |
|
USB |
|
Устройство для чтения карт памяти |
|
Ethernet (RJ-45) |
|
RS-232 |
|
Bluetooth |
|
Инфракрасный порт |
|
LPT |
|
FireWire (IEEE 1394) |
|
Память/Процессор |
|
Объем памяти |
512 |
Частота процессора |
400 |
Дополнительная информация |
|
Работа от аккумулятора |
|
Диагональ дисплея |
5,7 |
Экран |
|
Поддержка ОС |
|
DOS | |
Windows | |
Mac OS | |
Linux | |
Потребляемая мощность |
|
При работе | 1 600 |
В режиме ожидания | 43 |
Уровень шума |
|
В режиме ожидания | 53 |
При работе | 73 |
Габариты |
|
Глубина |
500 |
Вес |
44,3 |
Ширина |
560 |
Высота |
633 |
Модули
104 MACHINE REAR PLATE
100 EXTERNAL COVERS, PANELS, ETC.
460 LASER SCANNER UNIT
T20 FAX ASSEMBLY (FAX model)
810 FIXING ASSEMBLY
A40 PAPER FEED ASSEMBLY (ADF)
310 PAPER PICK-UP ASSEMBLY
350 PAPER DELIVERY REVERSE ASSY
770 WASTE TONER BOX ASSEMBLY
250 MAIN DRIVE ASSEMBLY
315 PRE-REGISTRATION GUIDE ASSY
A12 PAPER PICK-UP COVER ASSEMBLY (ADF)
A30 DRIVE ASSEMBLY (ADF)
A13 DOCUMENT TRAY ASSEMBLY (ADF)
101 INTERNAL COMPONENTS 1
280 FIXNG DRIVE ASSY
A10 INTERNAL COMPONENTS (ADF)
980 HIGH VOLTAGE PCB ASSEMBLY
320 TRANSFER PAPER FEED ASSEMBLY
300 CASSETTE ASSEMBLY
103 INTERNAL COMPONENTS 3
110 RIGHT DOOR ASSEMBLY
935 ENGINE CONTROLLER PCB ASS`Y
102 INTERNAL COMPONENTS 2
130 CONTROL PANEL ASSEMBLY
620 HOPPER ASSEMBLY
400 READER ASSEMBLY
640 DEVELOPING UNIT
900 CONTROLLER BOX ASSEMBLY
930 MAIN CONTROLLER PCB ASSEMBLY
312 MULTI PAPER PICK-UP ASSEMBLY
Детали
Деталь: | RIB, HANDLE |
Парткод: | FC0-3283-000 |
Деталь: | ROLLER, TENSION |
Парткод: | FC0-3309-000 |
Деталь: | FAN |
Парткод: | FK2-2530-000 |
Деталь: | BATTERY, NI-MH |
Парткод: | FK3-1626-000 |
Деталь: | PAPER PICK-UP MOTOR UNIT |
Парткод: | FM4-6516-000 |
Деталь: | DRAWER CABLE UNIT, CASSETTE |
Парткод: | FM4-6564-000 |
Деталь: | LINK DRIVE UNIT |
Парткод: | FM4-6566-000 |
Деталь: | SIZE DETECT UNIT |
Парткод: | FM4-6571-000 |
Деталь: | FAN UNIT |
Парткод: | FM4-8017-000 |
Деталь: | SPRING, TENSION |
Парткод: | FU8-2667-000 |
Деталь: | BELT, TIMING, CR |
Парткод: | XF2-1610-440 |
Деталь: | CONNECTOR, SNAP TIGHT, 3P, W |
Парткод: | VS1-7173-003 |
Деталь: | CONNECTOR, SNAP TIGHT, 6P, W |
Парткод: | VS1-7173-006 |
Деталь: | CONNECTOR, SNAP TIGHT, 9P, W |
Парткод: | VS1-7173-009 |
Деталь: | CONNECTOR, SNAP TIGHT, 12P, W |
Парткод: | VS1-7173-012 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7177-002 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7177-003 |
Деталь: | CONNECTOR, 2P |
Парткод: | VS1-7507-002 |
Деталь: | CONNECTOR, SNAP TIGHT, BL |
Парткод: | VS1-8412-015 |
Деталь: | CONNECTOR, SNAP TIGHT, BL |
Парткод: | VS1-8412-017 |
Деталь: | CONNECTOR, SNAP TIGHT, BL |
Парткод: | VS1-8412-019 |
Деталь: | CONNECTOR, SNAP TIGHT, BL |
Парткод: | VS1-8412-023 |
Деталь: | SCREW, RS, M3X8.5 |
Парткод: | XA9-1567-000 |
Деталь: | SCREW, W/WASHER, M3X6 |
Парткод: | XA9-0702-000 |
Деталь: | RING, RETAINING |
Парткод: | FC6-9867-000 |
Деталь: | SPRING, TENSION |
Парткод: | FU8-2957-000 |
Деталь: | CONNECTOR, SNAP TIGHT |
Парткод: | VS1-7173-005 |
Деталь: | MACHINE REAR PLATE |
Парткод: | NPN |
Деталь: | TRAY, PAPER DELIVERY, 1 |
Парткод: | FC0-0868-000 |
Деталь: | COVER, LEFT |
Парткод: | FL3-5653-000 |
Деталь: | COVER, REAR |
Парткод: | FL3-5652-000 |
Деталь: | TRAY, PAPER DELIVERY, 2 |
Парткод: | FC0-0883-000 |
Деталь: | COVER, REEDER, LOWER |
Парткод: | FC0-0884-000 |
Деталь: | COVER, READER, LEFT |
Парткод: | FC0-1076-000 |
Деталь: | COVER, READER, FRONT |
Парткод: | FC0-1077-000 |
Деталь: | COVER, READER, RIGHT |
Парткод: | FL3-5655-000 |
Деталь: | COVER, RIGHT FRONT |
Парткод: | FL3-5654-000 |
Деталь: | TRAY, REVERSE |
Парткод: | FC0-1155-000 |
Деталь: | COVER, READER REAR, 2 |
Парткод: | FC0-1193-000 |
Деталь: | COVER, READER, RIGHT REAR |
Парткод: | FL3-5656-000 |
Деталь: | LABEL, GLASS CLEANING |
Парткод: | FC0-3971-000 |
Деталь: | LABEL, GLASS CLEANING |
Парткод: | FC0-3972-000 |
Деталь: | LABEL, GLASS CLEANING |
Парткод: | FC0-3973-000 |
Деталь: | LABEL, GLASS CLEANING |
Парткод: | FC0-3975-000 |
Деталь: | LABEL, GLASS CLEANING |
Парткод: | FC0-3976-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3984-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3985-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3986-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3987-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3988-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3989-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3990-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3991-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3993-000 |
Деталь: | LABEL, COPY INHIBITED |
Парткод: | FC0-3994-000 |
Деталь: | RIB, STACK |
Парткод: | FC0-4033-000 |
Деталь: | PANEL, INNER |
Парткод: | FC0-4034-000 |
Деталь: | EMBLEM |
Парткод: | FC6-4391-000 |
Деталь: | COVER, RIGHT REAR |
Парткод: | FL3-5617-000 |
Деталь: | COVER UNIT, RIGHT FRONT |
Парткод: | FM4-8001-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0629-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0630-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0632-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0631-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0633-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0634-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0636-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0635-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0637-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0638-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0640-000 |
Деталь: | FRONT DOOR ASSY |
Парткод: | FM0-0639-000 |
Деталь: | PIN, HINGE |
Парткод: | FA8-2446-000 |
Деталь: | LABEL, WASTE TONER EXCHANGE |
Парткод: | FC0-3392-000 |
Деталь: | LABEL, DRUM EXCHANGE, 1 |
Парткод: | FC0-3394-000 |
Деталь: | LABEL, DRUM EXCHANGE, 1 |
Парткод: | FC0-6912-000 |
Деталь: | LABEL, DRUM EXCHANGE, 2 |
Парткод: | FC0-3395-000 |
Деталь: | LABEL, TONER SUPPLY |
Парткод: | FC0-3403-000 |
Деталь: | LABEL, TONER |
Парткод: | FC0-3406-000 |
Деталь: | LABEL, TONER |
Парткод: | FC0-3405-000 |
Деталь: | LABEL, TONER |
Парткод: | FC0-3404-000 |
Деталь: | COVER UNIT, OPERATION, REAR |
Парткод: | FM4-6538-000 |
Деталь: | COVER UNIT, OPERATION, REAR |
Парткод: | FM4-6539-000 |
Деталь: | RING, RETAINING |
Парткод: | FC5-4697-000 |
Деталь: | COVER, FFC |
Парткод: | FC0-3278-000 |
Деталь: | LABEL,TRANSFER ROLLER CAUTION |
Парткод: | FC0-3409-000 |
Деталь: | LABEL, MAIN POWER |
Парткод: | FC0-3419-000 |
Деталь: | LABEL, MAIN POWER |
Парткод: | FC0-3418-000 |
Деталь: | LABEL, MAIN POWER |
Парткод: | FC0-3425-000 |
Деталь: | LABEL, MAIN POWER |
Парткод: | FC0-3426-000 |
Деталь: | COVER, AIR FILTER |
Парткод: | FC0-3997-000 |
Деталь: | FILTER, AIR |
Парткод: | FM0-0139-000 |
Деталь: | SCREW, RS, M3X8.5 |
Парткод: | XA9-1567-000 |
Деталь: | EXTERNAL COVERS, PANELS, ETC. |
Парткод: | NPN |
Деталь: | LASER SCANNER UNIT |
Парткод: | FM0-1846-000 |
Деталь: | SPEAKER |
Парткод: | FK2-9442-000 |
Деталь: | CABLE, IP-NCU FLAT(21PIN) |
Парткод: | FK3-1444-000 |
Деталь: | CABLE, IP-NCU FLAT(24PIN) |
Парткод: | FK3-1445-000 |
Деталь: | FAX PCB ASSEMBLY |
Парткод: | FM4-8166-000 |
Деталь: | OFFHOOK PCB ASSEMBLY |
Парткод: | FM4-8168-000 |
Деталь: | FAX ASSEMBLY |
Парткод: | NPN |
Деталь: | GUIDE, FIXING, LOWER |
Парткод: | FC0-0829-000 |
Деталь: | FLAG, DELIVERY SENSOR |
Парткод: | FC0-0830-000 |
Деталь: | CAM |
Парткод: | FC0-1013-000 |
Деталь: | GUIDE, FIXING CABLE |
Парткод: | FC0-1021-000 |
Деталь: | FLAG, RELEASE SENSOR |
Парткод: | FC0-1022-000 |
Деталь: | SPRING, TORSION |
Парткод: | FC0-4054-000 |
Деталь: | FIXING DELIVERY LOWER UNIT |
Парткод: | FM4-6583-000 |
Деталь: | FIXING DUPLEXING FEED UNIT |
Парткод: | FM4-6584-000 |
Деталь: | GEAR, 36T |
Парткод: | FU9-0206-000 |
Деталь: | GEAR, 29T |
Парткод: | FU9-0207-000 |
Деталь: | GEAR, 27T |
Парткод: | FU9-0401-000 |
Деталь: | GEAR, 23T |
Парткод: | FU9-0209-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | SCREW, W/WASHER, M3X6 |
Парткод: | XA9-0702-000 |
Деталь: | LABEL, HIGH TMP.CAUTION |
Парткод: | FC0-3411-000 |
Деталь: | LABEL, FIXING JAM DISPOSE |
Парткод: | FC0-3413-000 |
Деталь: | LABEL, GREEN |
Парткод: | FC0-3414-000 |
Деталь: | SPRING, TORSION |
Парткод: | FC0-1045-000 |
Деталь: | SPRING,SENSOR LEVER |
Парткод: | FC5-1367-000 |
Деталь: | FIXING ASSEMBLY |
Парткод: | FM4-6495-000 |
Деталь: | FIXING ASSEMBLY |
Парткод: | FM4-8050-000 |
Деталь: | SOLENOID |
Парткод: | FK2-0408-000 |
Деталь: | SOLENOID |
Парткод: | FK2-6871-000 |
Деталь: | STAY, READ |
Парткод: | FL3-5556-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | FU7-2192-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | PAPER FEED ASSEMBLY |
Парткод: | FM4-7736-000 |
Деталь: | ROLLER, PAPER PICK-UP |
Парткод: | FB6-3405-000 |
Цена: | 550 ₽ |
Деталь: | PLATE, GROUNDING |
Парткод: | FC0-1156-000 |
Деталь: | ROLLER, SEPARATION |
Парткод: | FC6-6661-000 |
Цена: | 600 ₽ |
Деталь: | ROLLER, FEED/SEPARATION |
Парткод: | FC6-7083-000 |
Деталь: | RING, RETAINING |
Парткод: | FC6-9867-000 |
Деталь: | STOPPER, ROLLER |
Парткод: | FC7-5845-000 |
Деталь: | LIFT MOTOR UNIT |
Парткод: | FM4-6568-000 |
Деталь: | VERTICAL PATH ROLLER UNIT |
Парткод: | FM4-8040-000 |
Деталь: | BUSHING |
Парткод: | FS5-1943-000 |
Деталь: | GEAR, 15T |
Парткод: | FU0-0043-000 |
Деталь: | BUSHING |
Парткод: | FU5-1763-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | SCREW, RS, M3X8.5 |
Парткод: | XA9-1567-000 |
Деталь: | PAPER PICK-UP ASSEMBLY |
Парткод: | FM4-6555-000 |
Деталь: | FAN |
Парткод: | FK2-8755-000 |
Деталь: | LEVER, SENSOR |
Парткод: | FL3-5627-000 |
Деталь: | REVERSE DRIVE UNIT |
Парткод: | FM4-6546-000 |
Деталь: | GEAR, 38T |
Парткод: | FU9-0221-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | BUSHING |
Парткод: | FS5-1943-000 |
Деталь: | SPRING, ROLLER |
Парткод: | FC0-4029-000 |
Деталь: | ROLLER |
Парткод: | FC0-4038-000 |
Деталь: | PAPER DELIVERY REVERSE ASSY |
Парткод: | FM4-6505-000 |
Деталь: | WASTE TONER BOX ASSEMBLY |
Парткод: | FM4-8035-000 |
Деталь: | BELT, TIMING |
Парткод: | XF2-1607-240 |
Деталь: | MAIN DRIVE ASSEMBLY |
Парткод: | FM4-6497-000 |
Деталь: | PHOTO-SENSOR, KUA0055C |
Парткод: | FK2-6470-000 |
Деталь: | PRE-REGISTRATION GUIDE ASSY |
Парткод: | FM4-6517-000 |
Деталь: | LINK, OPEN/CLOSE |
Парткод: | FC0-2970-000 |
Деталь: | CLIP |
Парткод: | FC5-4425-000 |
Деталь: | GUIDE, PAPER PICK-UP, LOWER |
Парткод: | FL3-5532-000 |
Деталь: | PAPER PICK-UP ROLLER UNIT |
Парткод: | FM4-7732-000 |
Деталь: | BUSHING |
Парткод: | FU5-1626-000 |
Деталь: | BUSHING |
Парткод: | FC0-2985-000 |
Деталь: | GEAR, 23 |
Парткод: | FU9-0354-000 |
Деталь: | PAPER PICK-UP COVER ASSEMBLY |
Парткод: | FM4-7733-000 |
Деталь: | CLIP |
Парткод: | FC5-4424-000 |
Деталь: | SOLENOID |
Парткод: | FK2-0408-000 |
Деталь: | MOTOR, STEPPING |
Парткод: | FK3-1633-000 |
Деталь: | MOTOR, STEPPING |
Парткод: | FK3-1634-000 |
Деталь: | ARM, SWING, FEED |
Парткод: | FL3-5542-000 |
Деталь: | ARM, SWING, REGIST |
Парткод: | FL3-5543-000 |
Деталь: | SPRING, TENSION |
Парткод: | FU8-2974-000 |
Деталь: | PULLEY, 45T/GEAR, 24T |
Парткод: | FU9-0345-000 |
Деталь: | PULLEY, 45T/GEAR, 36T |
Парткод: | FU9-0358-000 |
Деталь: | PULLEY, 33T/GEAR, 36T/24T |
Парткод: | FU9-0367-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | BELT, TIMING |
Парткод: | XF2-1606-040 |
Деталь: | BELT, TIMING |
Парткод: | XF2-1606-940 |
Деталь: | GEAR, 20T |
Парткод: | FU9-0353-000 |
Деталь: | DRIVE ASSEMBLY |
Парткод: | FM4-7730-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | DOCUMENT TRAY ASSEMBLY |
Парткод: | FM4-7734-000 |
Деталь: | LEVER, BOTTLE EXCHANGE |
Парткод: | FC0-0922-000 |
Деталь: | SPRING, LEAF |
Парткод: | FC0-1003-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | IC, PHOTO INTERRUPTER |
Парткод: | WG8-5928-000 |
Деталь: | LABEL, DEV. PRESSURE LOCK |
Парткод: | FC0-3396-000 |
Деталь: | PANEL, DEVELOPING EXCHANGE |
Парткод: | FC0-3998-000 |
Деталь: | LEVER, HANDLE LOCK |
Парткод: | FC9-0503-000 |
Деталь: | HOOK, FRONT DOOR |
Парткод: | FC9-1698-000 |
Деталь: | GEAR, 7T |
Парткод: | FC9-7708-000 |
Деталь: | CABLE, PANEL-IP FLAT |
Парткод: | FK3-1443-000 |
Деталь: | INTERLOCK UNIT |
Парткод: | FM4-6501-000 |
Деталь: | WASTE TONER DRIVE UNIT |
Парткод: | FM4-6507-000 |
Деталь: | STAY UNIT, DEVELOPING |
Парткод: | FM4-8027-000 |
Деталь: | LABEL, LOCK UNLOCK |
Парткод: | FU6-8873-000 |
Деталь: | LABEL, LASER CAUTION |
Парткод: | FU6-8880-000 |
Деталь: | SPRING, TORSION |
Парткод: | FU7-2912-000 |
Деталь: | SPRING, TENSION |
Парткод: | FU7-2996-000 |
Деталь: | HV GUIDE UNIT, LOWER |
Парткод: | FM4-7990-000 |
Деталь: | HV GUIDE UNIT, RIGHT |
Парткод: | FM4-7991-000 |
Деталь: | SCREW, RS, M3X8.5 |
Парткод: | XA9-1567-000 |
Деталь: | CABLE, CONNECTING, SENSOR |
Парткод: | FM4-7782-000 |
Деталь: | INTERNAL COMPONENTS 1 |
Парткод: | NPN |
Деталь: | MOTOR, DC |
Парткод: | FK3-1408-000 |
Деталь: | SCREW, W/WASHER, M3X6 |
Парткод: | XA9-0702-000 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7177-006 |
Деталь: | FIXNG DRIVE ASSY |
Парткод: | FM4-6504-000 |
Деталь: | COVER, REAR |
Парткод: | FC0-2976-000 |
Деталь: | HINGE |
Парткод: | FC0-2978-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | FU8-2856-000 |
Деталь: | LABEL, PROHIBITION DOCUMENT |
Парткод: | FC0-3449-000 |
Деталь: | LABEL, PROHIBITION DOCUMENT |
Парткод: | FC0-3450-000 |
Деталь: | LABEL, DOCUMENT SIZE |
Парткод: | FC0-3451-000 |
Деталь: | LABEL, DOCUMENT SIZE |
Парткод: | FC0-3452-000 |
Деталь: | SUPPORT, HINGE |
Парткод: | FC0-5254-000 |
Деталь: | COVER, LEFT |
Парткод: | FL3-5535-000 |
Деталь: | PAD, SEPARATION |
Парткод: | FL3-7878-000 |
Деталь: | PANEL, COPYBOARD |
Парткод: | FL3-5544-000 |
Деталь: | FRONT COVER UNIT |
Парткод: | FM4-7735-000 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7177-002 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7207-003 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7207-004 |
Деталь: | CONNECTOR, SNAP TIGHT |
Парткод: | VS1-7207-006 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7207-008 |
Деталь: | CONNECTOR, 2P |
Парткод: | VS1-7507-002 |
Деталь: | INTERNAL COMPONENTS |
Парткод: | NPN |
Деталь: | HIGH VOLTAGE PCB ASSEMBLY |
Парткод: | FM4-7814-000 |
Деталь: | HIGH VOLTAGE PCB ASSEMBLY |
Парткод: | NPN |
Деталь: | GUIDE, ELIMINATOR |
Парткод: | FL3-4856-000 |
Деталь: | HOLDER, ELIMINATOR |
Парткод: | FL3-4857-000 |
Деталь: | TRANSFER ROLLER UNIT |
Парткод: | FM4-6522-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | TRANSFER PAPER FEED ASSEMBLY |
Парткод: | FM4-6520-000 |
Деталь: | PLATE, FREE STOP |
Парткод: | FC0-0913-000 |
Деталь: | LINK, BACK END DETECT |
Парткод: | FC0-0945-000 |
Деталь: | SPRING, TORSION |
Парткод: | FC0-1159-000 |
Деталь: | PLATE,PAPER SIDE END EXTENSION |
Парткод: | FC0-3350-000 |
Деталь: | GEAR, 9T |
Парткод: | FC0-3351-000 |
Деталь: | LABEL, PAPER SET |
Парткод: | FC0-3427-000 |
Деталь: | LABEL, SIZE INDEX, END, LARGE |
Парткод: | FC0-3429-000 |
Деталь: | LABEL, SIZE INDEX, END |
Парткод: | FC0-3430-000 |
Деталь: | LABEL, SIZE INDEX, SIDE |
Парткод: | FC0-3431-000 |
Деталь: | PLATE, JOINT |
Парткод: | FC8-2475-000 |
Деталь: | LINK, BUTTON, UPPER, 2 |
Парткод: | FC8-4986-000 |
Деталь: | LINK, BUTTON, LOWER |
Парткод: | FC8-4987-000 |
Деталь: | GEAR, 14T |
Парткод: | FC8-4990-000 |
Деталь: | SHEET, SEPARATION |
Парткод: | FC9-7171-000 |
Деталь: | ARM, LOCK, A |
Парткод: | FC9-7259-000 |
Деталь: | ARM, LOCK, B |
Парткод: | FC9-7260-000 |
Деталь: | ROLLER, LINK |
Парткод: | FC9-7261-000 |
Деталь: | PLATE, CENTER |
Парткод: | FL3-4878-000 |
Деталь: | CASSETTE FRONT COVER UNIT |
Парткод: | FM4-6533-000 |
Деталь: | BACK END LIMIT PLATE UNIT |
Парткод: | FM4-6534-000 |
Деталь: | SIDE END PLATE ASSEMBLY, REAR |
Парткод: | FM4-6559-000 |
Деталь: | SIDE END PLATE ASSEMBLY, FRONT |
Парткод: | FM4-6560-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | FU7-2518-000 |
Деталь: | SCREW W/WASHER, M3X6 |
Парткод: | XA9-1016-000 |
Деталь: | SCREW, B, M4X8 |
Парткод: | XA9-1523-000 |
Деталь: | TOOTHED LOCK WASHER(SUS) |
Парткод: | XD1-4100-402 |
Деталь: | CASSETTE ASSEMBLY |
Парткод: | FM4-6558-000 |
Деталь: | HANDLE, PRESSURE |
Парткод: | FC0-5123-000 |
Деталь: | ROD, JOINT |
Парткод: | FC0-0967-000 |
Деталь: | RAIL, CARTRIDGE, RIGHT |
Парткод: | FC0-1005-000 |
Деталь: | STOPPER |
Парткод: | FC0-1131-000 |
Деталь: | BUSHING |
Парткод: | FC0-1133-000 |
Деталь: | CAM, DEVELOPING PRESSURE |
Парткод: | FC0-4005-000 |
Деталь: | GUIDE, HOPPER LOWER |
Парткод: | FC0-4012-000 |
Деталь: | PLATE, GROUNDING |
Парткод: | FC0-5104-000 |
Деталь: | BUSHING |
Парткод: | FC0-5113-000 |
Деталь: | CLIP |
Парткод: | FC8-6380-000 |
Деталь: | FAN CLUTCH |
Парткод: | FK2-2530-000 |
Деталь: | REGISTRATION UNIT |
Парткод: | FK2-9154-000 |
Деталь: | DRAWER CABLE UNIT |
Парткод: | FM4-6509-000 |
Деталь: | REGISTRATION ROLLER UNIT |
Парткод: | FM4-6511-000 |
Деталь: | POWER SUPPLY ASSEMBLY |
Парткод: | FM4-6527-000 |
Деталь: | POWER SUPPLY ASSEMBLY |
Парткод: | FM4-6579-000 |
Деталь: | HV GUIDE UNIT |
Парткод: | FM4-8051-000 |
Деталь: | HV GUIDE UNIT, UPPER |
Парткод: | FM4-6590-000 |
Деталь: | RAIL UNIT, CARTRIDGE, LEFT |
Парткод: | FM4-7989-000 |
Деталь: | POWER SWITCH UNIT |
Парткод: | FM4-8004-000 |
Деталь: | BUSHING |
Парткод: | FM4-8011-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | FU5-1030-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | FU8-2648-000 |
Деталь: | CONNECTOR, |
Парткод: | FU8-2661-000 |
Деталь: | SNAP TIGHT, BK CONNECTOR, |
Парткод: | VS1-7177-003 |
Деталь: | SNAP TIGHT, 6P, W |
Парткод: | VS1-7173-006 |
Деталь: | SCREW, RS, M3X8.5 |
Парткод: | XA9-1567-000 |
Деталь: | INTERNAL COMPONENTS 3 |
Парткод: | NPN |
Деталь: | RING |
Парткод: | FC0-1083-000 |
Деталь: | BAND, RIGHTDOOR, REAR |
Парткод: | FC0-1090-000 |
Деталь: | ARM, GEAR |
Парткод: | FC0-1120-000 |
Деталь: | HOOK UNIT, RIGHT DOOR |
Парткод: | FM4-6543-000 |
Деталь: | STOPPER, LEVER |
Парткод: | FC0-1143-000 |
Деталь: | PLATE, RIGHT DOOR |
Парткод: | FC0-1179-000 |
Деталь: | ROLLER |
Парткод: | FC0-3305-000 |
Деталь: | BAND, RIGHT DOOR, FRONT |
Парткод: | FC0-3381-000 |
Деталь: | LABEL, LEVER |
Парткод: | FC0-5105-000 |
Деталь: | BUSHING |
Парткод: | FC9-0717-000 |
Деталь: | FAN |
Парткод: | FK2-6818-000 |
Деталь: | DOOR, RIGHT |
Парткод: | FL3-5619-000 |
Деталь: | DUPLEXING PAPER FEED UNIT |
Парткод: | FM4-6572-000 |
Деталь: | SOLENOID UNIT |
Парткод: | FM4-6573-000 |
Деталь: | VERTICAL PATH GUIDE UNIT |
Парткод: | FM4-6574-000 |
Деталь: | DUPLEXING FEED MOUNT UNIT |
Парткод: | FM4-6575-000 |
Деталь: | DUPLEXING ENTRANCE GUIDE ASSY |
Парткод: | FM4-6576-000 |
Деталь: | PULLEY, 28T |
Парткод: | FU5-3796-000 |
Деталь: | GEAR, 18T |
Парткод: | FU6-0934-000 |
Деталь: | PULLEY, 28T |
Парткод: | FU6-3074-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | FU8-2649-000 |
Деталь: | SPRING, TENSION |
Парткод: | FU8-2663-000 |
Деталь: | SPRING, TORSION |
Парткод: | FU8-2669-000 |
Деталь: | GEAR, 31T/22T |
Парткод: | FU9-0222-000 |
Деталь: | GEAR, 20 |
Парткод: | FU9-0230-000 |
Деталь: | PULLEY, 28T/GEAR, 20T/26T |
Парткод: | FU9-0231-000 |
Деталь: | CONNECTOR, SNAP TIGHT, 3P, W |
Парткод: | VS1-7173-003 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7177-003 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | BELT, TIMING |
Парткод: | XF2-1617-740 |
Деталь: | HINGE, DOOR, FRONT |
Парткод: | FL3-4874-000 |
Деталь: | HINGE, DOOR, REAR |
Парткод: | FL3-4875-000 |
Деталь: | RIGHT DOOR ASSEMBLY |
Парткод: | NPN |
Деталь: | IC,TC200GO2EFG-1031,GATE ARRAY |
Парткод: | FK2-1773-000 |
Деталь: | IC, FSA0AC211AA |
Парткод: | FK2-6450-000 |
Деталь: | ENGINE CONTROLLER PCB ASSY |
Парткод: | FM4-7813-000 |
Деталь: | ENGINE CONTROLLER PCB ASSY |
Парткод: | FM4-7819-000 |
Деталь: | RAIL, FIXING GUIDE |
Парткод: | FC0-1010-000 |
Деталь: | LOCK, RIGHT DOOR |
Парткод: | FC0-1144-000 |
Деталь: | RAIL UNIT, FIXING, FRONT |
Парткод: | FM4-6502-000 |
Деталь: | VERTICAL PATH GUIDE UNIT |
Парткод: | FM4-6524-000 |
Деталь: | LASER SHUTTER UNIT |
Парткод: | FM4-8018-000 |
Деталь: | DRAWER CABLE UNIT, FIXING |
Парткод: | FM4-8064-000 |
Деталь: | SCREW, RS, M3X8.5 |
Парткод: | XA9-1567-000 |
Деталь: | INTERNAL COMPONENTS 2 |
Парткод: | NPN |
Деталь: | HINGE, 1 |
Парткод: | FC0-0969-000 |
Деталь: | SHEET, TOUCH PANEL |
Парткод: | FC0-3257-000 |
Деталь: | KEY TOP, TEN |
Парткод: | FC0-3261-000 |
Деталь: | COVER, LED |
Парткод: | FC0-3262-000 |
Деталь: | KEY TOP, RESET |
Парткод: | FC0-3263-000 |
Деталь: | KEY TOP, START |
Парткод: | FC0-3264-000 |
Деталь: | KEY TOP, STOP |
Парткод: | FC0-3265-000 |
Деталь: | KEY TOP, VOLUME |
Парткод: | FC0-3266-000 |
Деталь: | DIAL, CONTRAST |
Парткод: | FC0-3267-000 |
Деталь: | KEY TOP, SYSTEM, 2 |
Парткод: | FC0-3272-000 |
Деталь: | KEY TOP, SYSTEM, 1 |
Парткод: | FC0-3273-000 |
Деталь: | KEY TOP, SYSTEM, 3 |
Парткод: | FC0-3274-000 |
Деталь: | KEY TOP, START, LED |
Парткод: | FC0-3275-000 |
Деталь: | HINGE, 2 |
Парткод: | FC0-3300-000 |
Деталь: | CABLE, CPU-TEN KEY FLAT |
Парткод: | FK3-1416-000 |
Деталь: | CABLE, CPU-SYSTEM KEY FLAT |
Парткод: | FK3-1417-000 |
Деталь: | CABLE, CPU-LCD FLAT |
Парткод: | FK3-1418-000 |
Деталь: | CONTROL PANEL CPU PCB ASSY |
Парткод: | FM4-7810-000 |
Деталь: | TEN KEY PCB ASSY |
Парткод: | FM4-7811-000 |
Деталь: | SYSTEM KEY PCB ASSY |
Парткод: | FM4-7812-000 |
Деталь: | COVER, CONTROL PANEL, FRONT, 1 |
Парткод: | FL3-4866-000 |
Деталь: | COVER, CONTROL PANEL, FRONT, 1 |
Парткод: | FL3-4868-000 |
Деталь: | COVER, CONTROL PANEL, FRONT, 1 |
Парткод: | FL3-4867-000 |
Деталь: | COVER, CONTROL PANEL, FRONT, 1 |
Парткод: | FL3-4870-000 |
Деталь: | COVER, CONTROL PANEL, FRONT, 1 |
Парткод: | FL3-4871-000 |
Деталь: | COVER, CONTROL PANEL, FRONT, 2 |
Парткод: | FC0-3256-000 |
Деталь: | PLATE, HINGE |
Парткод: | FC0-3269-000 |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | FM4-6515-000 |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | FM4-8054-000 |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | FM4-8053-000 |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | FM4-8056-000 |
Деталь: | CONTROL PANEL ASSEMBLY |
Парткод: | FM4-8057-000 |
Деталь: | LEVER, SET |
Парткод: | FC0-4061-000 |
Деталь: | BOTTLE DRIVE UNIT |
Парткод: | FM4-8029-000 |
Деталь: | PIN |
Парткод: | XD3-2200-222 |
Деталь: | HOPPER ASSEMBLY |
Парткод: | FM4-6506-000 |
Деталь: | COVER, READER REAR, 1 |
Парткод: | FC0-1079-000 |
Деталь: | MOUNT, JUMP |
Парткод: | FC0-1184-000 |
Деталь: | COVER, HINGE, LEFT |
Парткод: | FC0-1188-000 |
Деталь: | COVER, HINGE, RIGHT |
Парткод: | FC0-1191-000 |
Деталь: | CLIP |
Парткод: | FC5-4424-000 |
Деталь: | SLIDER |
Парткод: | FC6-4511-000 |
Деталь: | PULLEY, 49T/17T |
Парткод: | FC6-7598-000 |
Деталь: | PULLEY, DRIVEN |
Парткод: | FC6-7604-000 |
Деталь: | CABLE, CIS-READER FLAT |
Парткод: | FK3-1447-000 |
Деталь: | MOTOR, STEPPING |
Парткод: | FK3-1448-000 |
Деталь: | READER GLASS UNIT |
Парткод: | FL2-3941-000 |
Деталь: | GLASS, COPYBOARD |
Парткод: | FL3-4881-000 |
Деталь: | GLASS, COPYBOARD |
Парткод: | FL3-4882-000 |
Деталь: | GLASS, COPYBOARD |
Парткод: | FL3-4883-000 |
Деталь: | CARRIAGE ASSY |
Парткод: | FM4-6514-000 |
Деталь: | CONTACT IMAGE SENSOR UNIT |
Парткод: | FM4-6536-000 |
Деталь: | PAPER SIZE SENSOR UNIT |
Парткод: | FM4-6537-000 |
Деталь: | READER CONNECTING PCB ASSY |
Парткод: | FM4-7826-000 |
Деталь: | PHOTO SENSOR UNIT, OPEN/CLOSE |
Парткод: | FM4-7999-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | FU8-2953-000 |
Деталь: | IC PHOTOINTERRUPTER, HYBRID |
Парткод: | WG8-5836-000 |
Деталь: | SCREW, MACH., FLAT HEAD, M3X4 |
Парткод: | XA9-0679-000 |
Деталь: | SCREW, RS, M3X8.5 |
Парткод: | XA9-1567-000 |
Деталь: | BELT, TIMING |
Парткод: | XF2-4607-230 |
Деталь: | BELT, TIMING |
Парткод: | XF2-4665-530 |
Деталь: | SUPPORT, GLASS, RIGHT |
Парткод: | FC0-5110-000 |
Деталь: | SUPPORT, GLASS, LEFT |
Парткод: | FC7-2975-000 |
Деталь: | READER ASSEMBLY |
Парткод: | NPN |
Деталь: | DEVELOPING UNIT |
Парткод: | FM4-6494-000 |
Деталь: | CABLE, IP-READER FLAT |
Парткод: | FK3-1446-000 |
Деталь: | DIMM PCB ASSEMBLY |
Парткод: | FM0-0099-000 |
Деталь: | DIMM PCB ASSEMBLY |
Парткод: | FM0-0098-000 |
Деталь: | CONTROLLER BOX ASSEMBLY |
Парткод: | NPN |
Деталь: | IC, MB87L8650, GATE ARRAY |
Парткод: | FK2-3218-000 |
Деталь: | IC, MB87S4030, ASIC, FUJITSU |
Парткод: | FK2-4903-000 |
Деталь: | IC, UPD 808000F1-641-RN4-A |
Парткод: | FK2-5758-000 |
Деталь: | IC, T6TH5EFG-0002(0), STANDARD |
Парткод: | FK2-7852-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM4-8163-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM4-8164-000 |
Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
Парткод: | FM4-8165-000 |
Деталь: | COVER, UPPER |
Парткод: | FL3-5660-000 |
Деталь: | COVER, ROLLER |
Парткод: | FL3-5659-000 |
Деталь: | HINGE, M.P. PICK UP, LEFT |
Парткод: | FC7-9959-000 |
Деталь: | HINGE, M.P. PICK UP, RIGHT |
Парткод: | FC7-9960-000 |
Деталь: | SOLENOID |
Парткод: | FK2-1410-000 |
Деталь: | LIFTER PLATE UNIT |
Парткод: | FM4-6540-000 |
Деталь: | MULTI TRAY UNIT |
Парткод: | FM4-6541-000 |
Деталь: | ROLLER, MP PICK-UP |
Парткод: | FL2-3897-000 |
Цена: | 750 ₽ |
Деталь: | PAD, SEPARATION |
Парткод: | FL3-4890-000 |
Цена: | 1 500 ₽ |
Деталь: | SPRING, TENSION |
Парткод: | FU6-2423-000 |
Деталь: | LABEL, MULTI TRAY SIZE |
Парткод: | FC0-3399-000 |
Деталь: | LABEL, MULTI TRAY SIZE |
Парткод: | FC0-3400-000 |
Деталь: | LABEL, MULTI TRAY SIZE |
Парткод: | FC0-3398-000 |
Деталь: | LABEL, PAPER SET SIDE |
Парткод: | FC0-3433-000 |
Деталь: | LABEL, PAPER SET SIDE |
Парткод: | FC0-3401-000 |
Деталь: | LABEL, PAPER SET SIDE |
Парткод: | FC0-3434-000 |
Деталь: | MULTI PAPER PICK-UP ASSEMBLY |
Парткод: | FM4-6496-000 |
Коды ошибок
E000-0001
E001-0000
E001-0001
E001-0002
E002-0000
E003-0000
E004-0000
E010-0001
E010-0002
E013-0001
E014-0001
E014-0002
E014-0003
E014-0004
E020-0000
E024-0000
E024-0001
E025-0000
E025-0001
E110-0001
E110-0002
E110-0003
E196-0000
E197-0000
E197-0001
E202-0000
E240-0000
E240-0001
E246-0001
E246-0002
E246-0003
E246-0005
E247-0001
E261-0000
E350-0000
E350-0001
E350-0002
E350-0003
E350-3000
E354-0001
E354-0002
E355-0000
E355-0004
E355-0005
E530-8001
E530-8002
E531-8001
E531-8002
E537-8001
E537-8002
E540-8001
E575-8002
E575-8004
E577-8001
E577-8002
E583-8001
E583-8002
E719-0000
E736-0000
E804-0000
E804-0001
E805-0000
E805-0001
E805-0002
E805-0003
E820-0000
E820-0001
E820-0002
E820-0003
E822-0000
E822-0001
E822-0002
E822-0003
E822-0004
E822-0005
Описание
Error code: | E000-0001 |
Description: | Fixing fault |
Causes: | After the fixing heater has gone on, the reading of the main thermistor is not 50 deg C within about 1.5 sec. Cause The fixing film unit is faulty. The engine controller PCB is faulty. |
Remedy: | - Replace the fixing film unit. - Replace the engine controller PCB. |
Error code: | E001-0000 |
Description: | Abnormally high temperature (detected by main thermistor) The main thermistor detected an abnormally high temperature 235 deg C) during temperature control |
Causes: | The main thermistor detected a temperature of higher than 255 degree C. |
Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E001-0001 |
Description: | Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (300 deg C) during temperature control. |
Causes: | The sub thermistor detected a temperature of higher than 290 degree C. |
Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E001-0002 |
Description: | Abnormally high temperature rise of fixing unit (circuit trouble) When fixing sub-thermistor 1 has detected a high temperature (ASIC detection) |
Causes: | The fixing film unit is faulty (i.e., the thermistor has a short circuit). The main power supply PCB is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service move: COPIER>FUNCTION>CLEAR>ERR. |
Remedy: | Check the connection of the connector in the thermistor wiring (wirepinching, disconnection). Replace the fixing unit. Replace the IH unit, halogen heater, fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
Error code: | E002-0000 |
Description: | Low temperature during temperature control. The target temperature is not reached during temperature control. |
Causes: | The fixing film unit is faulty (i.e., the main thermistor TH1 has poor contact, or the fixing heater is faulty). The main power supply PCB is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>FCLEAR>ERR. |
Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E003-0000 |
Description: | Abnormally low temperature (detected by main thermistor) After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
Causes: | The main thermistor detected a temperature of lower than 120 degree C for more than 1 second when 20 seconds elapsed after start of the power distribution to the heater. |
Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
Error code: | E004-0000 |
Description: | Fixing power supply drive circuit error |
Causes: | 43 to 57Hz could not be detected continuously for more than 5 seconds when zero cross detection started. |
Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the DC Controller Board. (2) Replace the Fixing Assembly. |
Error code: | E010-0001 |
Description: | Main motor error Lock of the motor fails to be detected 2 sec or more after the motor starts to operate. |
Causes: | The main motor drive system has an excess load. The pickup main motor (M2)/delivery main motor (M16)/pedestal main motor (M19) is faulty. The serial driver PCB is faulty. The DC controller PCB is faulty. |
Remedy: | Check on connection of the connector, Replace the motor |
Error code: | E010-0002 |
Description: | Main motor error After rotation of the motor becomes stable, the motor lock fails (i.e., the motor becomes unstable) for 500msec or more. |
Causes: | The main motor drive system has an excess load. The pickup main motor (M2)/delivery main motor (M16)/pedestal main motor (M19) is faulty. The serial driver PCB is faulty. The DC controller PCB is faulty. |
Remedy: | Check on connection of the connector, Replace the motor |
Error code: | E013-0001 |
Description: | There is clogging by waste toner. There is a waste toner full error. the soft counter reading is 250000 or higher. |
Causes: | The waste toner feedscrew has locked. The waste toner feed motor is faulty. The transfer high-voltage PCB is faulty. The serial driver PCB is faulty. The DC controller PCB is faulty. |
Remedy: | Check the amount of waste toner; then, turn off and then on the main power. |
Error code: | E014-0001 |
Description: | Fixing motor failure |
Causes: | Fixing motor rotation error The motor rotated out of the target speed during rotation after the target speed was reached. |
Remedy: | Check the contact of the connector between the fixing motor (J516) and the DC controller PCB (J81). Check the gear between the fixing motor and the fixing assembly. Replace the fixing motor. |
Error code: | E014-0002 |
Description: | Fixing motor error When the lock was disengaged after the motor was locked |
Causes: | The belt motor (M15) is faulty. The belt motor drive system has an excess load. The drum drive AC generation PCB is faulty. The transfer drive AC generation PCB is faulty. The DC controller PCB is faulty. |
Remedy: | Replace the drumITB moter. Replace the fixing moter.Replace the DCDC converterAi38VAj. Replace the fixing belt unit. |
Error code: | E014-0003 |
Description: | The encoder signal is not generated by the motor. |
Causes: | The belt motor (M15) is faulty. The belt motor drive system has an excess load. The drum drive AC generation PCB is faulty. The transfer drive AC generation PCB is faulty. The DC controller PCB is faulty. |
Remedy: | Possible cause is overload or rotation failure of the motor due to an electrical trouble 1. Check if the Fixing Assembly is installed. 2. Remove and reinstall the Fixing Assembly 3. Check the gear 4. Replace the Fixing Assembly 5. Check the harness/connector between the DC Controller PCB (UN09/ J210) and the Fixing Motor (M17). 6. Check conduction of FU1153 in the AC Driver PCB (UN14) =>Replace the AC Driver when the fuse is blown out 7. Replace the Fixing Motor (M17) 8. Replace the DC Controller PCB (UN09) |
Error code: | E014-0004 |
Description: | The motor rotates in the direction opposite the desired direction. |
Causes: | The belt motor (M15) is faulty. The belt motor drive system has an excess load. The drum drive AC generation PCB is faulty. The transfer drive AC generation PCB is faulty. The DC controller PCB is faulty. |
Remedy: | 1. Check the connector connection between the Fixing Pressure Release Sensor (PS18) or the Fixing Motor (M1) and the DC Controller PCB (PCB1). 2. Replace the Fixing Pressure Release Sensor (PS18). 3. Replace the Fixing Motor (M1). 4. Replace the DC Controller PCB (PCB1). |
Error code: | E020-0000 |
Description: | Density sensor failure warning |
Error code: | E024-0000 |
Description: | Toner level sensor failure |
Causes: | Failure output from the toner level sensor (Yellow). Cause Memory controller PCB assembly fault, DC controller PCB assembly fault, toner cartridge fault. |
Remedy: | - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB |
Error code: | E024-0001 |
Description: | Toner level sensor failure |
Causes: | Failure output from the toner level sensor (Magenta). Cause Memory controller PCB assembly fault, DC controller PCB assembly fault, toner cartridge fault. |
Remedy: | - Replace toner cartridge - Replace memory controller PCB - Replace DC controller PCB |
Error code: | E025-0000 |
Description: | Error in the toner motor Indicates an error of Y developing assembly toner supply |
Remedy: | Check on connection of the toner motor and the DC controller PCB, Replace the DC controller PCB, Replace the toner motor |
Error code: | E025-0001 |
Description: | There is an over-current in the hopper stirring motor (M23)or the black toner supply motor (M25). There is an overcurrent in the hopper stirring motor (M23). |
Remedy: | Turn off and then on the main power. |
Error code: | E110-0001 |
Description: | Optical assembly error (Scanner motor) |
Causes: | Optical assembly error (Scanner motor rotation failure) |
Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
Error code: | E110-0002 |
Description: | Error in first artificial BD adjustment |
Causes: | Primary pseudo BD correction |
Error code: | E110-0003 |
Description: | There is a scanner motor error. The FG signal is not detected while the polygon scanner is rotating stably. |
Remedy: | Turn off the main power, and check the DC controller PCB and the 24V system fuse; then, turn on the main power. |
Error code: | E196-0000 |
Description: | Invalid RFU execution requested |
Causes: | D-con update for the host machine or the optional cassette is not completed. |
Error code: | E197-0000 |
Description: | Printer engine communication error Erroneous communication between the DC controller PCB and image processor PCB was detected. |
Causes: | Internal communication error |
Remedy: | - Check the connectors of the DC controller PCB and image processor PCB. - Replace the DC controller PCB for normal connection. - Replace the image processor PCB. |
Error code: | E197-0001 |
Description: | Engine communication error |
Causes: | Error between DC controller PCB and main controller PCB. Cause Failure in connection between PCB, failure in DC controller PCB, failure in controller PCB. |
Remedy: | - Check the connection of the connector of the DC controller PCB and controller PCB - Replace the DC controller PCB - Replace the controller PCB |
Error code: | E202-0000 |
Description: | A fault has occurred in detecting the No. 1 mirror home position. The No. 1 mirror base moves in reverse but does not move to its home position. The home position sensor does not go ON within a specific period of time. |
Remedy: | Caution No code will be indicated. The keys will be locked. You can check the code in service mode (COPIER>DISPLAY>ERR). - Check if the scanner motor is connected properly, and replace the scanner motor if necessary. - Check if the connector (J1720) of the relay PCB is mounted properly. - Replace the scanner home position sensor. - Replace the reader controller PCB. |
Error code: | E240-0000 |
Description: | Error in communication between main controller and DC controller Serial communication error |
Causes: | The main controller PCB is faulty. The DC controller PCB is faulty. |
Remedy: | Check the connector connections. Check the DC controller PCB (MAISY). Replace the No.1 main controller circuit. |
Error code: | E240-0001 |
Description: | Error in communication of controller There is no response when 3 sec passed since the main controller had sent the pickup request to DC controller during printing. |
Remedy: | Check connector, check connection of sub PCB in the controller box, check / replace DC controller PCB / main controller PCB |
Error code: | E246-0001 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E246-0002 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E246-0003 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E246-0005 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E247-0001 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E261-0000 |
Description: | Zero-cross signal error If failed to detect zero-cross signal cycle of the power supply when initializing. When the input of the zero-signal failed continuously for three seconds while controlling the temperature adjustment. |
Causes: | The wiring is faulty (short circuit, open circuit). The main power supply PCB is faulty. The DC controller PCB is faulty. |
Remedy: | - Replace the power supply PCB. - Replace the DC controller PCB. |
Error code: | E350-0000 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E350-0001 |
Description: | Fault in the soft ID PCB/function An error has occurred in the course of full data read operation on the soft ID PCB. |
Remedy: | Turn off the main power, and check the connection of the soft ID PCB. If the remedy fails, replace the soft ID PCB. |
Error code: | E350-0002 |
Description: | Fault in the soft ID PCB/function The value of the check sum area of all data read from the soft ID PCB and the result of checksum computation do not match. |
Remedy: | Turn off the main power, and replace the soft ID PCB. If the remedy fails, replace the soft ID PCB. |
Error code: | E350-0003 |
Description: | Fault in the soft ID PCB/function The values in the soft ID check sum area of FRAM, SRAM1, and SRAM2 and the result of a check sum computation differ. |
Remedy: | Turn off the main power, and check the connection of the soft ID PCB. If the remedy fails, replace the soft ID PCB. |
Error code: | E350-3000 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E354-0001 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E354-0002 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E355-0000 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E355-0004 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E355-0005 |
Description: | System error |
Causes: | System error |
Remedy: | Contact the sales company. |
Error code: | E530-8001 |
Description: | Alignment error When the alignment plate fails to leave the alignment plate front home position sensor position even when the alignment plate front motor was driven for 4 sec. |
Remedy: | Replace the alignment plate front motor (M103) and alignment plate front home position sensor (PI106). |
Error code: | E530-8002 |
Description: | Alignment error When the alignment plate fails to return to the alignment plate front home position sensor position even when the alignment plate front motor was driven for 4 sec. |
Remedy: | Replace the alignment plate front motor (M103) and alignment plate front home position sensor (PI106). |
Error code: | E531-8001 |
Description: | Stapler error When the stapler fails to leave the stapler home position even though the stapler motor was driven for 0.5 sec. |
Remedy: | Replace the stapler motor (M111) and stapler home position detection sensor (PI50). |
Error code: | E531-8002 |
Description: | Stapler error When the stapler fails to return to the stapler home position even though the stapler motor was driven for 0.5 sec. |
Remedy: | Replace the stapler motor (M111) and stapler home position detection sensor (PI50). |
Error code: | E537-8001 |
Description: | Front alignment error When the alignment plate fails to leave the alignment plate back home position sensor position even though the alignment plate back motor was driven for 4 sec. |
Remedy: | Replace the alignment plate back motor (M104) and alignment plate back home position sensor (PI107). |
Error code: | E537-8002 |
Description: | Front alignment error When the alignment plate fails to return to the alignment plate back home position sensor position even though the alignment plate back motor was driven for 4 sec. |
Remedy: | Replace the alignment plate back motor (M104) and alignment plate back home position sensor (PI107). |
Error code: | E540-8001 |
Description: | Tray up/down error - When the tray fails to return to the home position even when the 1st tray shift motor has been driven for 20 sec. - When the tray fails to move to another area even when the 1st tray shift motor has been driven for 4 sec. |
Remedy: | - Check the 1st tray shift area sensor connectors. - Replace the 1st tray shift area sensor. - Replace the 1st tray shift motor (M107) |
Error code: | E575-8002 |
Description: | Gripper Motor (M7) error The gripper unit does not leave the gripper unit home position when the Gripper Motor (M7) has been driven for 3.8 seconds. |
Remedy: | 1. Check the connector connection of the Gripper HP Sensor (S7) or the Gripper Motor (M7). 2. Check for open circuit of the Harness of the Gripper HP Sensor (S7) or the Gripper Motor (M7). 3. Replace the Gripper HP Sensor (S7). 4. Replace the Gripper Motor (M7). 5. Replace the Finisher Controller PCB. |
Error code: | E575-8004 |
Description: | Gripper Motor (M7) clock error When the Gripper Motor (M7) was operated, the Gripper Encoder Sensor (S8) detected rotation of 400 clocks or more. |
Remedy: | 1. Check the connector connection of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7). 2. Check for open circuit of the Harness of the Gripper Encoder Sensor (S8) or the Gripper Motor (M7). 3. Replace the Gripper Encoder Sensor (S8). 4. Replace the Gripper Motor (M7). 5. Replace the Finisher Controller PCB. |
Error code: | E577-8001 |
Description: | Paddle error Finisher-Z1 The HP sensor fails to be ON within 1500ms after the paper retaining paddle starts to move to its HP. |
Remedy: | Replace the paddle HP sensor (SR8) , Replace the paddle motor (M6) |
Error code: | E577-8002 |
Description: | Paddle error Finisher-Z1 The HP sensor fails to be OFF within 1000ms after the paper retaining paddle starts to move from its HP. |
Remedy: | Replace the paddle HP sensor (SR8) , Replace the paddle motor (M6) |
Error code: | E583-8001 |
Description: | Error in the tray auxiliary guide motor (Finisher-K1). The tray auxiliary guide does not come off the tray auxiliary guide front/rear HP sensors when the tray auxiliary guide motor has been driven for 3 seconds |
Remedy: | 1. The connector of the tray auxiliary guide front HP sensor (S137) or the tray auxiliary guide rear HP sensor (S136) are disconnected. 2. The connector of the tray auxiliary guide motor (M120) is disconnected. 3. The wiring of the tray auxiliary guide front HP sensor or the tray auxiliary guide rear HP sensor are faulty. 4. The wiring of the tray auxiliary guide motor is faulty. 5. The tray auxiliary guide front HP sensor is faulty. 6. The tray auxiliary guide rear HP sensor is faulty. 7. The tray auxiliary guide motor is faulty. 8. The finisher controller PCB is faulty. |
Error code: | E583-8002 |
Description: | Error in the tray auxiliary guide motor (Finisher-K1). The tray auxiliary guide front/rear HP sensors does nor detect the tray auxiliary guide when the tray auxiliary guide motor has been driven for 3 seconds. |
Remedy: | 1. The connector of the tray auxiliary guide front HP sensor (S137) or the tray auxiliary guide rear HP sensor (S136) are disconnected. 2. The connector of the tray auxiliary guide motor (M120) is disconnected. 3. The wiring of the tray auxiliary guide front HP sensor or the tray auxiliary guide rear HP sensor are faulty. 4. The wiring of the tray auxiliary guide motor is faulty. 5. The tray auxiliary guide front HP sensor is faulty. 6. The tray auxiliary guide rear HP sensor is faulty. 7. The tray auxiliary guide motor is faulty. 8. The finisher controller PCB is faulty. |
Error code: | E719-0000 |
Description: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
Causes: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
Remedy: | - Check the connectors of the card reader and image processor PCB. - Replace the card reader for normal connection. - Replace the image processor PCB. |
Error code: | E736-0000 |
Description: | CCU communication error The installed modem PCB is incompatible. |
Causes: | Error in CCU-modem communication Cause: Problem in FAX-NCU PCB / main controller PCB |
Remedy: | - Check the connectors of the image processor PCB and modem. - Replace the modem PCB. - Replace the image processor PCB. |
Error code: | E804-0000 |
Description: | Power supply fan failure |
Error code: | E804-0001 |
Description: | Controller fan error Stop of power supply cooling fan 2 was detected |
Remedy: | Check the connection of power supply cooling fan 2, replace it |
Error code: | E805-0000 |
Description: | Fan failure The fan is faulty. |
Causes: | Fixing fan error Cause The fixing fan is faulty. The engine controller PCB is faulty. |
Remedy: | - Check the fan connector. - Replace the fan. - Replace the DC controller PCB. |
Error code: | E805-0001 |
Description: | Error in duplex cooling fan |
Causes: | Fan 1 failure |
Error code: | E805-0002 |
Description: | Fan Motor 2 error |
Causes: | The Sub Fan fails to rotate at the specified rotation speed. |
Remedy: | 1. Check the connection of the Sub Fan. 2. Replace the Sub Fan. |
Error code: | E805-0003 |
Description: | Fan failure |
Causes: | Controller fan failure detected The controller fan does not rotate because some kind of failure occurred in it. |
Remedy: | Replace the controller fan. |
Error code: | E820-0000 |
Description: | The rotation of the drum fan is faulty. The lock signal is detected for 5 sec or more although the drum fan is being driven. |
Remedy: | - Check if there is no foreign material in the rotation assembly of the drum fan. - Check if the connector (J512) of the DC controller PCB is mounted properly. - Replace the drum fan. - Replace the DC controller PCB. |
Error code: | E820-0001 |
Description: | Developing Cooling Fan (Front) (FM7) rotation error The lock signal was not detected for 5.0 seconds while the Developing Cooling Fan (Front) (FM7) was being driven. *The same status was detected again after executing an error retry. |
Remedy: | 1. Check the connector connection between the Developing Cooling Fan (Front) (FM7) and the DC Controller PCB (PCB1). 2. Replace the Developing Cooling Fan (Front) (FM7). 3. Replace the DC Controller PCB (PCB1). |
Error code: | E820-0002 |
Description: | There is an error in the process unit cooling fan. There is an error in the process unit fan. |
Remedy: | Turn off the main switch, and check the wiring of the DC controller PCB and the 24V system fuse; then, turn on the main switch. |
Error code: | E820-0003 |
Description: | Developing Cooling Fan (Rear) (FM8) rotation error The lock signal was not detected for 5.0 seconds while the Developing Cooling Fan (Rear) (FM8) was being driven. *The same status was detected again after executing an error retry. |
Remedy: | 1. Check the connector connection between the Developing Cooling Fan (Rear) (FM8) and the DC Controller PCB (PCB1). 2. Replace the Developing Cooling Fan (Rear) (FM8). 3. Replace the DC Controller PCB (PCB1). |
Error code: | E822-0000 |
Description: | Delivery Cooling Fan (Front) (FM3) error The lock signal was detected for 5.0 seconds while the Delivery Cooling Fan (Front) (FM3) was being stopped. *The same status was detected again after executing an error retry. |
Remedy: | 1. Check the connector connection between the Delivery Cooling Fan (Front) (FM3) and the DC Controller PCB (PCB1). 2. Replace the Delivery Cooling Fan (Front) (FM3). 3. Replace the DC Controller PCB (PCB1). |
Error code: | E822-0001 |
Description: | Delivery Cooling Fan (Front) (FM3) rotation error The lock signal was not detected for 5.0 seconds while the Delivery Cooling Fan (Front) (FM3) was being driven. *The same status was detected again after executing an error retry. |
Remedy: | 1. Check the connector connection between the Delivery Cooling Fan (Front) (FM3) and the DC Controller PCB (PCB1). 2. Replace the Delivery Cooling Fan (Front) (FM3). 3. Replace the DC Controller PCB (PCB1). |
Error code: | E822-0002 |
Description: | Delivery Cooling Fan (Center) (FM2) error A lock signal was detected for 5 seconds while the Delivery Cooling Fan (Center) (FM2) was being driven. *The same status was detected again after executing an error retry. |
Remedy: | 1. Disconnect and then connect the connector (J210) on the DC Controller PCB (PCB1) to check the connection. 2. Replace the Delivery Cooling Fan (Center) (FM2). 3. Replace the DC Controller PCB (PCB1). |
Error code: | E822-0003 |
Description: | Delivery Cooling Fan (Center) (FM2) rotation error The lock signal was not detected for 5.0 seconds while the Delivery Cooling Fan (Center) (FM2) was being driven. *The same status was detected again after executing an error retry. |
Remedy: | 1. Check the connector connection between the Delivery Cooling Fan (Center) (FM2) and the DC Controller PCB (PCB1). 2. Replace the Delivery Cooling Fan (Center) (FM2). 3. Replace the DC Controller PCB (PCB1). |
Error code: | E822-0004 |
Description: | Delivery Cooling Fan (Rear) (FM1) error A lock signal was detected for 5 seconds while the Delivery Cooling Fan (Rear) (FM1) was being driven. *The same status was detected again after executing an error retry. |
Remedy: | 1. Disconnect and then connect the connector (J210) on the DC Controller PCB (PCB1) to check the connection. 2. Replace the Delivery Cooling Fan (Rear) (FM1). 3. Replace the DC Controller PCB (PCB1). |
Error code: | E822-0005 |
Description: | Delivery Cooling Fan (Rear) (FM1) rotation error The lock signal was not detected for 5.0 seconds while the Delivery Cooling Fan (Rear) (FM1) was being driven. *The same status was detected again after executing an error retry. |
Remedy: | 1. Check the connector connection between the Delivery Cooling Fan (Rear) (FM1) and the DC Controller PCB (PCB1). 2. Replace the Delivery Cooling Fan (Rear) (FM1). 3. Replace the DC Controller PCB (PCB1). |