Canon imageRUNNER 6800C
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Скорость печати
A4
68
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Тип устройства |
МФУ |
Цветность печати |
цветная |
Сканер |
|
Копир |
|
Макс. формат |
A3 |
Размещение |
напольный |
Телефон |
|
Печать фотографий |
|
Факс |
|
Принтер |
|
Двусторонняя печать |
|
Время разогрева |
540 |
Пигментные чернила |
|
Печать без полей |
|
Прямая печать |
|
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 2 400 |
Скорость ч/б печати |
|
| A4 | 68 |
| A3 | 16 |
Скорость цветной печати |
|
| A4 | 28 |
| A3 | 8 |
Время выхода первого отпечатка |
|
| Ч/б | 5,3 |
| Цветн, | 12,2 |
Копир |
|
Макс, количество копий за цикл |
999 |
Время выхода первой копии |
5 |
Значение масштаба |
|
| Максимальное | 4 |
| Минимальное | 0,25 |
Макс, разрешение (ч/б) |
|
| По X | 600 |
| По Y | 600 |
Сканер |
|
Тип сканера |
планшетный/протяжный |
Оттенки серого |
256 |
Устройство автоподачи оригиналов |
двустороннее |
Макс. формат оригинала |
A3 |
Макс, размер сканирования |
|
| По X | 297 |
| По Y | 432 |
Расходные материалы |
|
Печать на: |
|
| Матовой бумаге |
|
| Конвертах |
|
| Этикетках |
|
| Глянцевой бумаге |
|
| Пленках |
|
| Карточках |
|
| CD/DVD |
|
| Фотобумаге |
|
| Рулоне |
|
Плотность бумаги |
|
| Максимальная | 250 |
| Минимальная | 64 |
Телефон |
|
АОН |
|
Caller ID |
|
Автоответчик |
|
Стандарт DECT |
|
Спикерфон |
|
Проводная трубка |
|
Беспроводная трубка |
|
Языки управления |
|
| PPDS |
|
|
|
|
| PostScript 2 |
|
| PCL 6 |
|
| PCL 5e |
|
| PostScript |
|
| PCL 5c |
|
| PostScript 3 |
|
Лотки |
|
Подача бумаги |
|
| Стандартная | 4 200 |
Вывод бумаги |
|
| Стандартный | 500 |
Финишер |
|
Сортер |
|
Брошюровщик |
|
Степлер |
|
Сортировка со сдвигом |
|
Интерфейсы |
|
Версия USB |
2,0 |
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
RS-232 |
|
Инфракрасный порт |
|
LPT |
|
Bluetooth |
|
Wi-Fi |
|
Ethernet (RJ-45) |
|
USB |
|
Веб-интерфейс |
|
Память/Процессор |
|
Емкость жесткого диска |
40 |
Объем памяти |
768 |
Дополнительная информация |
|
Мин. системные требования |
|
Экран |
|
Поддержка ОС |
|
| Linux |
|
| DOS |
|
| Windows |
|
| Mac OS |
|
Потребляемая мощность |
|
| При работе | 1 650 |
Габариты |
|
Ширина |
679 |
Высота |
1 191 |
Вес |
226 |
Глубина |
852 |
Модули
PLATEN & GUIDE UNIT
Printer & Accessories
ROLL UNIT
STAND UNIT ST-26
CUTTER UNIT
ELECTRICAL PART
STAND UNIT ST-27
INK SUPPLY & PURGE UNIT
PINCH ROLLER UNIT
INK SUPPLY & PURGE UNIT iPF686/ 685/ 681/ 680
LINEAR SCALE
FEED ROLLER UNIT
COVERS
CARRIAGE UNIT
STAND UNIT ST-27 2
AIR FLOW FAN UNIT
Tool
Детали STAND UNIT ST-27 2
| Деталь: | TUBE GUIDE UNIT |
| Парткод: | QM4-2864-000 |
| Деталь: | MOUNT, MULTI SENSOR REFERENCE |
| Парткод: | QL2-6891-000 |
| Деталь: | PLATEN |
| Парткод: | QL2-6889-000 |
| Деталь: | PLATEN, RIGHT |
| Парткод: | QL2-6888-000 |
| Деталь: | GUIDE, DELIVERY, UPPER |
| Парткод: | QC4-9076-000 |
| Деталь: | GUIDE, DELIVERY |
| Парткод: | QC4-8788-000 |
| Деталь: | SCREW, RS, M3X8 |
| Парткод: | XA9-1386-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | SPUR JOINT PLATE UNIT |
| Парткод: | QM4-2795-000 |
| Деталь: | PRINTHEAD |
| Парткод: | NPN |
| Деталь: | INK TANK (MBK) |
| Парткод: | NPN |
| Деталь: | INK TANK (PBK) |
| Парткод: | NPN |
| Деталь: | INK TANK (C) |
| Парткод: | NPN |
| Деталь: | INK TANK (M) |
| Парткод: | NPN |
| Деталь: | INK TANK (Y) |
| Парткод: | NPN |
| Деталь: | BRUSH, CLEANING |
| Парткод: | QC4-8782-000 |
| Деталь: | SPOOL SHAFT UNIT |
| Парткод: | QM4-2860-000 |
| Деталь: | LIMITER, TORQUE |
| Парткод: | QC4-9189-000 |
| Деталь: | ROLLER, LIMIT, LEFT |
| Парткод: | QC4-9190-000 |
| Деталь: | CLUTCH, ONE-WAY |
| Парткод: | QC4-9191-000 |
| Деталь: | ROLLER, LIMIT, RIGHT |
| Парткод: | QC4-9192-000 |
| Деталь: | CAP, SPOOL, LEFT |
| Парткод: | QC4-9193-000 |
| Деталь: | CAP, SPOOL, RIGHT |
| Парткод: | QC4-9194-000 |
| Деталь: | FLANGE UNIT (R) |
| Парткод: | QM4-2814-000 |
| Деталь: | GEAR, 15T |
| Парткод: | QC4-9202-000 |
| Деталь: | FLANGE UNIT (L) |
| Парткод: | QM4-2810-000 |
| Деталь: | LEVER, LOCK, FLANGE |
| Парткод: | QC4-9183-000 |
| Деталь: | ROLL HOLDER UNIT (L) |
| Парткод: | QM4-2878-000 |
| Деталь: | ROLL HOLDER UNIT (R) |
| Парткод: | QM4-2879-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-5097-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-5098-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-1392-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-5099-010 |
| Деталь: | CORD, POWER |
| Парткод: | QH2-2732-000 |
| Деталь: | CORD, POWER |
| Парткод: | QK1-1396-020 |
| Деталь: | CORD, GROUNDING |
| Парткод: | QK2-0830-000 |
| Деталь: | SPACER, ROLL |
| Парткод: | QC4-9179-000 |
| Деталь: | LABEL,ROLL HOLDER |
| Парткод: | QC4-9203-000 |
| Деталь: | SCREW, RS, M3X8 |
| Парткод: | XA9-1386-000 |
| Деталь: | HOLD PIN |
| Парткод: | QC4-9196-000 |
| Деталь: | WRENCH, 16 |
| Парткод: | QC4-9301-010 |
| Деталь: | WRENCH, 17 |
| Парткод: | QC2-4361-000 |
| Деталь: | WRENCH, HEX KEY |
| Парткод: | QC2-4362-000 |
| Деталь: | FEED GUIDE UNIT (L) |
| Парткод: | QM4-2803-000 |
| Деталь: | ROLLER, GUIDE |
| Парткод: | QC4-9148-000 |
| Деталь: | PHOTO-SENSOR, KUA0055C |
| Парткод: | FK2-6470-000 |
| Деталь: | HARNESS, WIRE, PE |
| Парткод: | QM7-3626-000 |
| Деталь: | COVER, REAR, LEFT |
| Парткод: | QC4-8804-000 |
| Деталь: | COVER, REAR, RIGHT |
| Парткод: | QC4-8805-000 |
| Деталь: | FEED GUIDE UNIT (U) |
| Парткод: | QM4-2802-000 |
| Деталь: | COVER, ROLL, LEFT |
| Парткод: | QC4-8813-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC4-8810-000 |
| Деталь: | COVER, ROLL, RIGHT |
| Парткод: | QC4-8807-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC4-8808-000 |
| Деталь: | MOUNT, SPOOL, LEFT |
| Парткод: | QC4-9253-000 |
| Деталь: | MOUNT, SPOOL, RIGHT |
| Парткод: | QC4-9260-000 |
| Деталь: | RAIL, SPOOL, LEFT |
| Парткод: | QC4-9254-000 |
| Деталь: | RAIL, SPOOL, RIGHT |
| Парткод: | QC4-9264-000 |
| Деталь: | HOLDER, SPOOL, LEFT |
| Парткод: | QC4-9251-000 |
| Деталь: | HOLDER, SPOOL, RIGHT |
| Парткод: | QC4-9259-000 |
| Деталь: | COVER, SUPPORT |
| Парткод: | QC4-9255-000 |
| Деталь: | DAMPER, AIR |
| Парткод: | QC4-9256-000 |
| Деталь: | HOLDER, DAMPER, LEFT |
| Парткод: | QC4-9252-000 |
| Деталь: | HOLDER, DAMPER, RIGHT |
| Парткод: | QC4-9262-000 |
| Деталь: | COVER, SPOOL GEAR |
| Парткод: | QC4-9261-000 |
| Деталь: | COVER, GEAR |
| Парткод: | QC4-9265-000 |
| Деталь: | GEAR, 25T |
| Парткод: | QC4-9290-000 |
| Деталь: | GEAR, 17T/28T |
| Парткод: | QC4-9286-000 |
| Деталь: | GEAR, 18T/54T |
| Парткод: | QC4-9285-000 |
| Деталь: | ENCODER UNIT |
| Парткод: | QM4-2831-000 |
| Деталь: | FILM, TIMING SLIT DISK |
| Парткод: | QC3-9660-000 |
| Деталь: | GEAR, 50T |
| Парткод: | QC4-9288-000 |
| Деталь: | LIMITER, TORQUE |
| Парткод: | QC4-9258-000 |
| Деталь: | GEAR, 50T |
| Парткод: | QC4-9287-000 |
| Деталь: | GEAR, 32T/96T |
| Парткод: | QC4-9289-000 |
| Деталь: | CAP, ROLL, RIGHT |
| Парткод: | QC4-9263-000 |
| Деталь: | FLAG, SENSOR |
| Парткод: | QC4-9279-000 |
| Деталь: | ARM, SENSOR FLAG |
| Парткод: | QC4-9280-000 |
| Деталь: | SOLENOID |
| Парткод: | QK1-9558-000 |
| Деталь: | MOTOR, STEPPING |
| Парткод: | QK1 -2081-000 |
| Деталь: | PHOTO-INTERRUPTER, SG2481 |
| Парткод: | WG8-5836-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC4-9282-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC4-9283-000 |
| Деталь: | HARNESS, WIRE, ROLL |
| Парткод: | QM3-7911-000 |
| Деталь: | HARNESS, WIRE, MOTOR |
| Парткод: | QM7-3634-000 |
| Деталь: | ROLL COVER UNIT |
| Парткод: | QM4-2858-000 |
| Деталь: | GUIDE, SLIDE |
| Парткод: | QC4-9172-000 |
| Деталь: | LOCK, SLIDE GUIDE |
| Парткод: | QC4-9173-000 |
| Деталь: | CLIP CLAMP, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | SCREW, RS, M3X8 |
| Парткод: | XA9-1386-000 |
| Деталь: | ENVIRONMENT SENSOR PCB ASSY |
| Парткод: | RK2-2884-000 |
| Деталь: | GEAR UNIT |
| Парткод: | QM4-2829-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC4-9291-000 |
| Деталь: | HOLDER, SENSOR FLAG |
| Парткод: | QC4-9278-000 |
| Деталь: | LABEL, HOLDER R |
| Парткод: | QC4-9292-000 |
| Деталь: | LABEL, HOLDER L |
| Парткод: | QC4-9257-000 |
| Деталь: | HARNESS, ROLL UNIT |
| Парткод: | QM7-3637-000 |
| Деталь: | HARNESS, EARTH |
| Парткод: | QM7-3638-000 |
| Деталь: | COVER, ROLL RIGHT A |
| Парткод: | QC5-2300-000 |
| Деталь: | COVER, ROLL RIGHT B |
| Парткод: | QC5-2301-000 |
| Деталь: | COVER, ROLL RIGHT C |
| Парткод: | QC5-2302-000 |
| Деталь: | COVER, ROLL LEFT A |
| Парткод: | QC5-2303-000 |
| Деталь: | COVER, ROLL LEFT B |
| Парткод: | QC5-2304-000 |
| Деталь: | COVER, ROLL LEFT C |
| Парткод: | QC5-2305-000 |
| Деталь: | SCREW, HEX SOCKET M4X10 |
| Парткод: | QC4-9300-000 |
| Деталь: | BASKET |
| Парткод: | QC4-9460-000 |
| Деталь: | SUPPORT ROD UNIT |
| Парткод: | QM4-2867-000 |
| Деталь: | SUPPORT, ROD |
| Парткод: | QC3-1739-000 |
| Деталь: | GUIDE, BASKET |
| Парткод: | QC3-1492-000 |
| Деталь: | JOINT, ROD |
| Парткод: | QC2-4346-000 |
| Деталь: | PAPER GUIDE UNIT |
| Парткод: | QM4-2834-000 |
| Деталь: | PAPER STOPPER UNIT |
| Парткод: | QC4-9319-000 |
| Деталь: | BOX, ACCESSORY |
| Парткод: | QC4-9304-000 |
| Деталь: | HOOK, BASKET |
| Парткод: | QC4-9323-000 |
| Деталь: | CAP, STAND |
| Парткод: | QC4-9326-000 |
| Деталь: | CASTER, W/STOPPER |
| Парткод: | QC4-9332-000 |
| Деталь: | SCREW, HEX SOCKET M4X10 |
| Парткод: | QC4-9300-000 |
| Деталь: | SCREW, ALLEN, M8X16 |
| Парткод: | QC4-9330-000 |
| Деталь: | SCREW, HEX SOCKET, M4X30 |
| Парткод: | QC4-9303-000 |
| Деталь: | SCREW, STEPPED, M4 |
| Парткод: | QC4-9324-000 |
| Деталь: | ROD, STOPPER 24 |
| Парткод: | QC4-9459-000 |
| Деталь: | ROD, AL 24 |
| Парткод: | QC5-1602-000 |
| Деталь: | ROD, SIDE AL |
| Парткод: | QC5-1598-000 |
| Деталь: | SUPPORT, ROD |
| Парткод: | QC4-9322-000 |
| Деталь: | HOLDER, ROD, R |
| Парткод: | QC4-9338-000 |
| Деталь: | HOLDER, ROD, L |
| Парткод: | QC4-9331-000 |
| Деталь: | COVER, PLATE |
| Парткод: | QC4-9052-000 |
| Деталь: | COVER, CUTTER DRIVE |
| Парткод: | QC4-9053-000 |
| Деталь: | CUTTER UNIT |
| Парткод: | QM3-5921-030 |
| Деталь: | CUTTER UNIT |
| Парткод: | QM4-2881-000 |
| Деталь: | CUTTER |
| Парткод: | QM3-5846-030 |
| Деталь: | BELT, TIMING |
| Парткод: | QC1-4850-000 |
| Деталь: | MOTOR, UNDER 10W, DC |
| Парткод: | QK1-0550-000 |
| Деталь: | GEAR, 30T |
| Парткод: | QC4-9071-000 |
| Деталь: | PHOTO-INTERRUPTER, SG2481 |
| Парткод: | WG8-5836-000 |
| Деталь: | HARNESS, WIRE, CUTTER, LEFT |
| Парткод: | QM7-3617-000 |
| Деталь: | HARNESS, WIRE, CUTTER, RIGHT |
| Парткод: | QM7-3618-000 |
| Деталь: | CLIP, CORD |
| Парткод: | WT2-5056-000 |
| Деталь: | CLIP CLAMP, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | SCREW, RS, M3X8 |
| Парткод: | XA9-1386-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | CUTTER SUPPORT UNIT |
| Парткод: | QM4-2826-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-5822-010 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM3-5821-010 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM7-3986-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM7-3987-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM7-3595-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM7-3599-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM7-3597-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM7-3601-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM7-5386-000 |
| Деталь: | MAIN CONTROLLER ASSY |
| Парткод: | QM7-5387-000 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | QK1-5141-000 |
| Деталь: | HDD, WD800BEVT-22ZCT0 |
| Парткод: | FK2-2416-000 |
| Деталь: | HDD, MK1676GSX(HDD2J96QSL) |
| Парткод: | WM2-5278-000 |
| Деталь: | HDD, MQ01ABF032 |
| Парткод: | WM2-5285-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | CLIP CLAMP, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5738-000 |
| Деталь: | HARNESS, WIRE, LEFT |
| Парткод: | QM3-4585-020 |
| Деталь: | HARNESS, WIRE, LEFT |
| Парткод: | QM7-3989-000 |
| Деталь: | HARNESS, WIRE, LEFT |
| Парткод: | QM7-3619-000 |
| Деталь: | HARNESS, WIRE, RIGHT |
| Парткод: | QM3-4606-000 |
| Деталь: | HARNESS, WIRE, RIGHT |
| Парткод: | QM7-3993-000 |
| Деталь: | HARNESS, WIRE, RIGHT |
| Парткод: | QM7-3644-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5098-000 |
| Деталь: | HARNESS, WIRE, HDD |
| Парткод: | QK1 -5080-000 |
| Деталь: | HARNESS, INLET |
| Парткод: | QM7-3616-000 |
| Деталь: | BASKET |
| Парткод: | QC4-9460-000 |
| Деталь: | SUPPORT ROD UNIT |
| Парткод: | QM4-2867-000 |
| Деталь: | SUPPORT, ROD |
| Парткод: | QC4-9322-000 |
| Деталь: | GUIDE, BASKET |
| Парткод: | QC4-9334-000 |
| Деталь: | ROD, SIDE AL |
| Парткод: | QC4-9335-000 |
| Деталь: | PROTECTOR, ROD |
| Парткод: | QC4-9333-000 |
| Деталь: | LABEL, UNLOCK |
| Парткод: | QC4-9339-000 |
| Деталь: | GUIDE, BASKET, R |
| Парткод: | AY3-4560-010 |
| Деталь: | TRAY |
| Парткод: | QC4-9349-000 |
| Деталь: | STOPPER, TRAY |
| Парткод: | QC4-9348-000 |
| Деталь: | HANDLE, BASKET |
| Парткод: | QC4-9355-000 |
| Деталь: | SPACER, BASKET |
| Парткод: | QC4-9351-000 |
| Деталь: | JOINT, C, R |
| Парткод: | QC4-9354-000 |
| Деталь: | JOINT, C, L |
| Парткод: | QC4-9352-000 |
| Деталь: | JOINT, SLIDE, R |
| Парткод: | QC4-9347-000 |
| Деталь: | JOINT, SLIDE, L |
| Парткод: | QC4-9346-000 |
| Деталь: | LINK ARM UNIT (R) |
| Парткод: | QM4-2842-000 |
| Деталь: | LINK ARM UNIT (L) |
| Парткод: | QM4-2841-000 |
| Деталь: | JOINT, ROD |
| Парткод: | QC4-9345-000 |
| Деталь: | ROD, AL, A, 24 |
| Парткод: | QC4-9461-000 |
| Деталь: | ROD, AL, B, 24 |
| Парткод: | QC4-9462-000 |
| Деталь: | ROD, AL, C |
| Парткод: | QC4-9344-000 |
| Деталь: | ROD, AL, D, 24 |
| Парткод: | QC4-9464-000 |
| Деталь: | ROD, STOPPER, AL 24 |
| Парткод: | QC4-9463-000 |
| Деталь: | PAPER GUIDE UNIT |
| Парткод: | QM4-2834-000 |
| Деталь: | ROD, STOPPER 24 |
| Парткод: | QC4-9459-000 |
| Деталь: | PAPER STOPPER UNIT |
| Парткод: | QC4-9319-000 |
| Деталь: | BOX, ACCESSORY |
| Парткод: | QC4-9304-000 |
| Деталь: | HOOK, BASKET |
| Парткод: | QC4-9323-000 |
| Деталь: | CAP, STAND |
| Парткод: | QC4-9326-000 |
| Деталь: | CASTER, W/STOPPER |
| Парткод: | QC4-9332-000 |
| Деталь: | SCREW, HEX SOCKET M4X10 |
| Парткод: | QC4-9300-000 |
| Деталь: | SCREW, ALLEN, M8X16 |
| Парткод: | QC4-9330-000 |
| Деталь: | SCREW, HEX SOCKET, M4X30 |
| Парткод: | QC4-9303-000 |
| Деталь: | SCREW, STEPPED, M4 |
| Парткод: | QC4-9324-000 |
| Деталь: | SCREW, RS, M4X10 |
| Парткод: | XA9-0949-000 |
| Деталь: | BUSHING |
| Парткод: | XZ9-0697-000 |
| Деталь: | RIVET |
| Парткод: | XD9-0179-000 |
| Деталь: | HOLDER, ROD, R |
| Парткод: | QC4-9338-000 |
| Деталь: | HOLDER, ROD, L |
| Парткод: | QC4-9331-000 |
| Деталь: | LABEL, STAND L |
| Парткод: | QC4-9311-000 |
| Деталь: | LABEL, STAND R |
| Парткод: | QC4-9312-000 |
| Деталь: | RING |
| Парткод: | QC4-9037-000 |
| Деталь: | GEAR, LIFT, IDLER B |
| Парткод: | QC4-9038-000 |
| Деталь: | GEAR, LIFT, DOUBLE B |
| Парткод: | QC4-9039-000 |
| Деталь: | GEAR, LIFT, DOUBLE C |
| Парткод: | QC4-9040-000 |
| Деталь: | COUPLING |
| Парткод: | QC4-9041-000 |
| Деталь: | MOTOR, STEPPING DC 10W UNDER |
| Парткод: | QK1 -0440-000 |
| Деталь: | GEAR, LIFT, 30T |
| Парткод: | QC4-9046-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC4-9047-000 |
| Деталь: | MICRO SWITCH |
| Парткод: | WC4-5052-000 |
| Деталь: | PHOTOINTERRUPTER, GP1S173LCS0F |
| Парткод: | WG8-5849-000 |
| Деталь: | PURGE UNIT |
| Парткод: | QM4-3670-000 |
| Деталь: | MOTOR, DC |
| Парткод: | QM4-2782-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9036-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5098-000 |
| Деталь: | INK SUPPLY UNIT (L) |
| Парткод: | QM3-5862-020 |
| Деталь: | INK SUPPLY UNIT (L) |
| Парткод: | QM4-3741-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-5856-020 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM4-3735-000 |
| Деталь: | HOLDER, INK TANK |
| Парткод: | QC2-0729-000 |
| Деталь: | HOLDER, INK TANK |
| Парткод: | QC5-1549-000 |
| Деталь: | GUIDE, LIGHT |
| Парткод: | QC2-0736-000 |
| Деталь: | GUIDE, LIGHT |
| Парткод: | QC5-1550-000 |
| Деталь: | LEVER, INK TANK |
| Парткод: | QC2-1281-000 |
| Деталь: | LEVER, INK TANK |
| Парткод: | QC5-1554-000 |
| Деталь: | INK TANK ROM PCB UNIT |
| Парткод: | QM3-1355-010 |
| Деталь: | INK TANK ROM PCB UNIT |
| Парткод: | QM7-3988-000 |
| Деталь: | SCREW, RS, M3X8 |
| Парткод: | XA9-1386-000 |
| Деталь: | GEAR, VALVE 2 |
| Парткод: | QC2-0739-000 |
| Деталь: | GEAR, VALVE 2 |
| Парткод: | QC5-1552-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | CAM GEAR, 38T |
| Парткод: | QC3-1612-000 |
| Деталь: | CAM GEAR, 38T |
| Парткод: | QC5-1572-000 |
| Деталь: | MOTOR, UNDER 10W, DC |
| Парткод: | QK1-0550-000 |
| Деталь: | GEAR, 22T/70T |
| Парткод: | QU1-0366-000 |
| Деталь: | GEAR, 22T/70T |
| Парткод: | QC5-1581-000 |
| Деталь: | GEAR, 14T |
| Парткод: | QU1-0367-000 |
| Деталь: | GEAR, 14T |
| Парткод: | QC5-1582-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QU1-2443-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC5-1583-000 |
| Деталь: | PHOTO-INTERRUPTER, SG2481 |
| Парткод: | WG8-5836-000 |
| Деталь: | INK SUPPLY MOUNT UNIT (L) |
| Парткод: | QM3-5910-010 |
| Деталь: | INK SUPPLY MOUNT UNIT (L) |
| Парткод: | QM4-3743-000 |
| Деталь: | INK SUPPLY MOUNT UNIT (R) |
| Парткод: | QM3-5861-010 |
| Деталь: | INK SUPPLY MOUNT UNIT (R) |
| Парткод: | QM4-3740-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC3-1615-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC5-1575-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC3-1616-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC5-1576-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC3-1617-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC5-1577-000 |
| Деталь: | HEAD MANAGEMENT SENSOR UNIT |
| Парткод: | QM4-3246-000 |
| Деталь: | HARNESS, WIRE, TANK, LEFT |
| Парткод: | QM3-4600-000 |
| Деталь: | HARNESS, WIRE, TANK, LEFT |
| Парткод: | QM7-3991-000 |
| Деталь: | HARNESS, WIRE, TANK (R) |
| Парткод: | QM3-4601-000 |
| Деталь: | HARNESS, WIRE, TANK (R) |
| Парткод: | QM7-3992-000 |
| Деталь: | CLAMP, CORD |
| Парткод: | WT2-0136-000 |
| Деталь: | CLIP, CABLE |
| Парткод: | WT2-5737-000 |
| Деталь: | CLIP CLAMP, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | INK SUPPLY TANK UNIT (R) |
| Парткод: | QM3-5954-000 |
| Деталь: | INK SUPPLY TANK UNIT (R) |
| Парткод: | QM4-3736-000 |
| Деталь: | INK SUPPLY TANK UNIT (L) |
| Парткод: | QM3-5955-000 |
| Деталь: | INK SUPPLY TANK UNIT (L) |
| Парткод: | QM4-3764-000 |
| Деталь: | CLIP, CORD |
| Парткод: | WT2-5056-000 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5738-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | CLAMP, CORD |
| Парткод: | WT2-0204-000 |
| Деталь: | MOUNT, JOINT, INK |
| Парткод: | QC4-8817-000 |
| Деталь: | JOINT A, INK |
| Парткод: | QC4-8866-000 |
| Деталь: | JOINT B, INK |
| Парткод: | QC4-8818-000 |
| Деталь: | CLAMP |
| Парткод: | QC4-8867-000 |
| Деталь: | TAPE, MOUNT, JOINT, INK |
| Парткод: | QC3-1939-000 |
| Деталь: | INK SUPPLY MOUNT UNIT (L) |
| Парткод: | QM4-2876-000 |
| Деталь: | INK SUPPLY MOUNT UNIT (R) |
| Парткод: | QM4-2873-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9365-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9366-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9367-000 |
| Деталь: | LEVER, INK TANK |
| Парткод: | QC4-9127-000 |
| Деталь: | INK TANK ROM PCB UNIT (L) |
| Парткод: | QM7-3608-000 |
| Деталь: | INK TANK ROM PCB UNIT (R) |
| Парткод: | QM7-3609-000 |
| Деталь: | HARNESS, WIRE, TANK (L) |
| Парткод: | QM7-3632-000 |
| Деталь: | HARNESS, WIRE, TANK (R) |
| Парткод: | QM7-3633-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR (L) |
| Парткод: | QM7-3640-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR (R) |
| Парткод: | QM7-3641-000 |
| Деталь: | INK SUPPLY TANK UNIT (L) |
| Парткод: | QM4-2875-000 |
| Деталь: | INK SUPPLY TANK UNIT (R) |
| Парткод: | QM4-2872-000 |
| Деталь: | GEAR, VALVE |
| Парткод: | QC4-9142-000 |
| Деталь: | CAM, VALVE 6T/52T |
| Парткод: | QD1-1225-000 |
| Деталь: | GEAR, VALVE 22T/80T |
| Парткод: | QD1-1233-000 |
| Деталь: | MOTOR, 24V, DC |
| Парткод: | QK1 -9860-000 |
| Деталь: | INK SUPPLY UNIT (L) |
| Парткод: | QM4-2874-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM4-2871-000 |
| Деталь: | CARRIAGE SIDE PLATE ASSY R |
| Парткод: | QL2-6905-000 |
| Деталь: | RELEASE LEVER UNIT |
| Парткод: | QM4-2821-000 |
| Деталь: | GEAR, RELEASE, 14T |
| Парткод: | QC4-9293-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC4-9296-000 |
| Деталь: | PAPER GUIDE ROLLER UNIT |
| Парткод: | QM4-2766-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC4-8795-000 |
| Деталь: | PINCH ROLLER UNIT |
| Парткод: | QM4-2765-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | RING |
| Парткод: | QC4-9037-000 |
| Деталь: | GEAR, LIFT, IDLER B |
| Парткод: | QC4-9038-000 |
| Деталь: | GEAR, LIFT, DOUBLE B |
| Парткод: | QC4-9039-000 |
| Деталь: | GEAR, LIFT, DOUBLE C |
| Парткод: | QC4-9040-000 |
| Деталь: | COUPLING |
| Парткод: | QC4-9041-000 |
| Деталь: | MOTOR, STEPPING DC 10W UNDER |
| Парткод: | QK1 -0440-000 |
| Деталь: | GEAR, LIFT, 30T |
| Парткод: | QC4-9046-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC4-9047-000 |
| Деталь: | MICRO SWITCH |
| Парткод: | WC4-5052-000 |
| Деталь: | PHOTOINTERRUPTER, GP1S173LCS0F |
| Парткод: | WG8-5849-000 |
| Деталь: | PURGE UNIT |
| Парткод: | QM4-3670-000 |
| Деталь: | MOTOR, DC |
| Парткод: | QM4-2782-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9036-000 |
| Деталь: | SADDLE, WIRE |
| Парткод: | WT2-5098-000 |
| Деталь: | INK SUPPLY UNIT (L) |
| Парткод: | QM3-5862-020 |
| Деталь: | INK SUPPLY UNIT (L) |
| Парткод: | QM4-3741-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM3-5856-020 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM4-3735-000 |
| Деталь: | HOLDER, INK TANK |
| Парткод: | QC2-0729-000 |
| Деталь: | HOLDER, INK TANK |
| Парткод: | QC5-1549-000 |
| Деталь: | GUIDE, LIGHT |
| Парткод: | QC2-0736-000 |
| Деталь: | GUIDE, LIGHT |
| Парткод: | QC5-1550-000 |
| Деталь: | LEVER, INK TANK |
| Парткод: | QC2-1281-000 |
| Деталь: | LEVER, INK TANK |
| Парткод: | QC5-1554-000 |
| Деталь: | INK TANK ROM PCB UNIT |
| Парткод: | QM3-1355-010 |
| Деталь: | INK TANK ROM PCB UNIT |
| Парткод: | QM7-3988-000 |
| Деталь: | SCREW, RS, M3X8 |
| Парткод: | XA9-1386-000 |
| Деталь: | GEAR, VALVE 2 |
| Парткод: | QC2-0739-000 |
| Деталь: | GEAR, VALVE 2 |
| Парткод: | QC5-1552-000 |
| Деталь: | BELT, TIMING |
| Парткод: | QC2-0832-000 |
| Деталь: | CAM GEAR, 38T |
| Парткод: | QC3-1612-000 |
| Деталь: | CAM GEAR, 38T |
| Парткод: | QC5-1572-000 |
| Деталь: | MOTOR, UNDER 10W, DC |
| Парткод: | QK1-0550-000 |
| Деталь: | GEAR, 22T/70T |
| Парткод: | QU1-0366-000 |
| Деталь: | GEAR, 22T/70T |
| Парткод: | QC5-1581-000 |
| Деталь: | GEAR, 14T |
| Парткод: | QU1-0367-000 |
| Деталь: | GEAR, 14T |
| Парткод: | QC5-1582-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QU1-2443-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | QC5-1583-000 |
| Деталь: | PHOTO-INTERRUPTER, SG2481 |
| Парткод: | WG8-5836-000 |
| Деталь: | INK SUPPLY MOUNT UNIT (L) |
| Парткод: | QM3-5910-010 |
| Деталь: | INK SUPPLY MOUNT UNIT (L) |
| Парткод: | QM4-3743-000 |
| Деталь: | INK SUPPLY MOUNT UNIT (R) |
| Парткод: | QM3-5861-010 |
| Деталь: | INK SUPPLY MOUNT UNIT (R) |
| Парткод: | QM4-3740-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC3-1615-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC5-1575-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC3-1616-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC5-1576-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC3-1617-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC5-1577-000 |
| Деталь: | HEAD MANAGEMENT SENSOR UNIT |
| Парткод: | QM4-3246-000 |
| Деталь: | HARNESS, WIRE, TANK, LEFT |
| Парткод: | QM3-4600-000 |
| Деталь: | HARNESS, WIRE, TANK, LEFT |
| Парткод: | QM7-3991-000 |
| Деталь: | HARNESS, WIRE, TANK (R) |
| Парткод: | QM3-4601-000 |
| Деталь: | HARNESS, WIRE, TANK (R) |
| Парткод: | QM7-3992-000 |
| Деталь: | CLAMP, CORD |
| Парткод: | WT2-0136-000 |
| Деталь: | CLIP, CABLE |
| Парткод: | WT2-5737-000 |
| Деталь: | CLIP CLAMP, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | INK SUPPLY TANK UNIT (R) |
| Парткод: | QM3-5954-000 |
| Деталь: | INK SUPPLY TANK UNIT (R) |
| Парткод: | QM4-3736-000 |
| Деталь: | INK SUPPLY TANK UNIT (L) |
| Парткод: | QM3-5955-000 |
| Деталь: | INK SUPPLY TANK UNIT (L) |
| Парткод: | QM4-3764-000 |
| Деталь: | CLIP, CORD |
| Парткод: | WT2-5056-000 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5738-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | CLAMP, CORD |
| Парткод: | WT2-0204-000 |
| Деталь: | MOUNT, JOINT, INK |
| Парткод: | QC4-8817-000 |
| Деталь: | JOINT A, INK |
| Парткод: | QC4-8866-000 |
| Деталь: | JOINT B, INK |
| Парткод: | QC4-8818-000 |
| Деталь: | CLAMP |
| Парткод: | QC4-8867-000 |
| Деталь: | TAPE, MOUNT, JOINT, INK |
| Парткод: | QC3-1939-000 |
| Деталь: | INK SUPPLY MOUNT UNIT (L) |
| Парткод: | QM4-2876-000 |
| Деталь: | INK SUPPLY MOUNT UNIT (R) |
| Парткод: | QM4-2873-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9365-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9366-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9367-000 |
| Деталь: | LEVER, INK TANK |
| Парткод: | QC4-9127-000 |
| Деталь: | INK TANK ROM PCB UNIT (L) |
| Парткод: | QM7-3608-000 |
| Деталь: | INK TANK ROM PCB UNIT (R) |
| Парткод: | QM7-3609-000 |
| Деталь: | HARNESS, WIRE, TANK (L) |
| Парткод: | QM7-3632-000 |
| Деталь: | HARNESS, WIRE, TANK (R) |
| Парткод: | QM7-3633-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR (L) |
| Парткод: | QM7-3640-000 |
| Деталь: | HARNESS, WIRE, INK SENSOR (R) |
| Парткод: | QM7-3641-000 |
| Деталь: | INK SUPPLY TANK UNIT (L) |
| Парткод: | QM4-2875-000 |
| Деталь: | INK SUPPLY TANK UNIT (R) |
| Парткод: | QM4-2872-000 |
| Деталь: | GEAR, VALVE |
| Парткод: | QC4-9142-000 |
| Деталь: | CAM, VALVE 6T/52T |
| Парткод: | QD1-1225-000 |
| Деталь: | GEAR, VALVE 22T/80T |
| Парткод: | QD1-1233-000 |
| Деталь: | MOTOR, 24V, DC |
| Парткод: | QK1 -9860-000 |
| Деталь: | INK SUPPLY UNIT (L) |
| Парткод: | QM4-2874-000 |
| Деталь: | INK SUPPLY UNIT (R) |
| Парткод: | QM4-2871-000 |
| Деталь: | CARRIAGE SIDE PLATE ASSY R |
| Парткод: | QL2-6905-000 |
| Деталь: | SCALE, LINEAR |
| Парткод: | QC3-1880-000 |
| Деталь: | SCALE, LINEAR |
| Парткод: | QC4-9427-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC4-9294-000 |
| Деталь: | COVER, CODE WHEEL |
| Парткод: | QL2-6894-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC4-9298-000 |
| Деталь: | MOTOR, DC |
| Парткод: | QK1 -0447-000 |
| Деталь: | PHOTOINTERRUPTER, GP1S173LCS0F |
| Парткод: | WG8-5849-000 |
| Деталь: | FLANGE, PULLEY |
| Парткод: | QC4-8784-000 |
| Деталь: | BELT, PAPER TRANSPORT |
| Парткод: | QC4-8783-000 |
| Деталь: | FEED ROLLER ASSY |
| Парткод: | QM4-2854-000 |
| Деталь: | BUSHING |
| Парткод: | QC4-8905-000 |
| Деталь: | HARNESS, WIRE, MOTOR |
| Парткод: | QM7-3647-000 |
| Деталь: | CLAMP, CABLE |
| Парткод: | WT2-5738-000 |
| Деталь: | CLIP, CORD |
| Парткод: | WT2-5056-000 |
| Деталь: | CLIP, CABLE |
| Парткод: | WT2-5737-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | BOTTOM COVER UNIT, L |
| Парткод: | QM4-2751-000 |
| Деталь: | BOTTOM COVER UNIT, R |
| Парткод: | QM4-2752-000 |
| Деталь: | SCREW, RS, M3X8 |
| Парткод: | XA9-1386-000 |
| Деталь: | LF ENCODER UNIT |
| Парткод: | QM4-2883-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-5842-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM3-5904-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM4-3745-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM4-3744-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM4-3746-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM4-3247-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM4-3204-000 |
| Деталь: | OPERATION PANEL UNIT |
| Парткод: | QM4-3205-000 |
| Деталь: | KEY, SCROLL |
| Парткод: | QC3-1695-000 |
| Деталь: | KEY, LOAD/CUT |
| Парткод: | QC3-1696-000 |
| Деталь: | KEY, OK |
| Парткод: | QC3-1697-000 |
| Деталь: | KEY, POWER |
| Парткод: | QC3-1698-000 |
| Деталь: | COVER, TOP, LEFT |
| Парткод: | QC3-1690-000 |
| Деталь: | COVER, TOP, LEFT |
| Парткод: | QD1-1245-000 |
| Деталь: | LEFT COVER UNIT |
| Парткод: | QM3-5885-000 |
| Деталь: | LEFT COVER UNIT |
| Парткод: | QM4-3756-000 |
| Деталь: | LEFT COVER UNIT |
| Парткод: | QM4-3202-000 |
| Деталь: | RIGHT COVER UNIT |
| Парткод: | QM3-5886-000 |
| Деталь: | RIGHT COVER UNIT |
| Парткод: | QM4-3757-000 |
| Деталь: | RIGHT COVER UNIT |
| Парткод: | QM4-3203-000 |
| Деталь: | CAP, BLANKING |
| Парткод: | QC4-9167-000 |
| Деталь: | INK TANK COVER UNIT (L) |
| Парткод: | QM3-5908-000 |
| Деталь: | INK TANK COVER UNIT (L) |
| Парткод: | QM4-3751-000 |
| Деталь: | INK TANK COVER UNIT (R) |
| Парткод: | QM3-5943-000 |
| Деталь: | INK TANK COVER UNIT (R) |
| Парткод: | QM3-5944-000 |
| Деталь: | INK TANK COVER UNIT (R) |
| Парткод: | QM4-3753-000 |
| Деталь: | INK TANK COVER UNIT (R) |
| Парткод: | QM4-3755-000 |
| Деталь: | INK TANK COVER UNIT (R) |
| Парткод: | QM4-4403-000 |
| Деталь: | INK TANK COVER UNIT (R) |
| Парткод: | QM4-4404-000 |
| Деталь: | FRONT COVER UNIT (L) |
| Парткод: | QM3-5878-000 |
| Деталь: | FRONT COVER UNIT (L) |
| Парткод: | QM4-3750-000 |
| Деталь: | FRONT COVER UNIT (R) |
| Парткод: | QM3-5879-000 |
| Деталь: | FRONT COVER UNIT (R) |
| Парткод: | QM4-3749-000 |
| Деталь: | UPPER COVER UNIT |
| Парткод: | QM4-2857-000 |
| Деталь: | UPPER REAR COVER UNIT |
| Парткод: | QM4-2863-000 |
| Деталь: | DAMPER |
| Парткод: | QC3-1683-000 |
| Деталь: | FRONT COVER UNIT |
| Парткод: | QM3-5948-000 |
| Деталь: | FRONT COVER UNIT |
| Парткод: | QM4-2877-000 |
| Деталь: | COVER, CUTTER GUARD |
| Парткод: | QC3-1829-000 |
| Деталь: | COVER, CUTTER GUARD |
| Парткод: | QC4-9225-000 |
| Деталь: | CAP, SCREW |
| Парткод: | QC4-8809-000 |
| Деталь: | COVER, DELIVERY |
| Парткод: | QL2-6893-000 |
| Деталь: | COVER, DELEVERY, RIGHT |
| Парткод: | QL2-6892-000 |
| Деталь: | COVER, MAINTENANCE CARTRIDGE |
| Парткод: | QC4-8838-000 |
| Деталь: | FOOT, RUBBER |
| Парткод: | QC4-9426-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | PAD |
| Парткод: | QC4-8832-000 |
| Деталь: | LABEL |
| Парткод: | QC4-8837-000 |
| Деталь: | FRONT COVER (L) |
| Парткод: | QD1-1235-000 |
| Деталь: | INK TANK COVER TOP (L) |
| Парткод: | QD1-1239-000 |
| Деталь: | INK TANK COVER |
| Парткод: | QD1-1240-000 |
| Деталь: | PLATE, SUPPORT |
| Парткод: | QD1-1253-000 |
| Деталь: | JOINT, INK TANK COVER |
| Парткод: | QD1-1254-000 |
| Деталь: | FRONT COVER (R) |
| Парткод: | QD1-1234-000 |
| Деталь: | INK TANK COVER TOP (R) |
| Парткод: | QD1-1279-000 |
| Деталь: | INK TANK COVER TOP (R) |
| Парткод: | QD1-1283-000 |
| Деталь: | INK TANK COVER TOP (R) |
| Парткод: | QD1-1280-000 |
| Деталь: | INK TANK COVER TOP (R) |
| Парткод: | QD1-1284-000 |
| Деталь: | SHEET, SLIP STOPPER |
| Парткод: | QC4-8831-000 |
| Деталь: | COVER, PROTECTION |
| Парткод: | QC4-8812-000 |
| Деталь: | PULLEY UNIT |
| Парткод: | QM4-2772-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC4-9295-000 |
| Деталь: | RETAINER, PULLEY |
| Парткод: | QC4-8798-000 |
| Деталь: | HOLDER, FLEXIBLE CABLE |
| Парткод: | QC4-8799-000 |
| Деталь: | COVER, FLEXIBLE CABLE |
| Парткод: | QC4-8800-000 |
| Деталь: | GUIDE, FLEXIBLE CABLE |
| Парткод: | QC4-8801-000 |
| Деталь: | COVER LOCK UNIT |
| Парткод: | QM4-2807-000 |
| Деталь: | PLATE, SWITCH |
| Парткод: | QC4-9161-000 |
| Деталь: | LEVER, LOCK |
| Парткод: | QC4-9163-000 |
| Деталь: | SOLENOID |
| Парткод: | QK1-9558-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC4-9164-000 |
| Деталь: | SUPPORT, TUBE |
| Парткод: | QC4-8802-000 |
| Деталь: | GUIDE, TUBE |
| Парткод: | QL2-6896-000 |
| Деталь: | INK TUBE UNIT |
| Парткод: | QM4-2865-000 |
| Деталь: | JOINT LEVER B |
| Парткод: | QC4-9233-000 |
| Деталь: | JOINT LEVER A |
| Парткод: | QC4-9237-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC4-9297-000 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM3-5938-020 |
| Деталь: | CARRIAGE UNIT |
| Парткод: | QM4-2880-010 |
| Деталь: | COVER, LINEAR ENCODER |
| Парткод: | QC4-8921-000 |
| Деталь: | ENCODER SENSOR UNIT |
| Парткод: | QM7-3613-000 |
| Деталь: | BELT, CARRIAGE |
| Парткод: | QC4-9441-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC4-8947-000 |
| Деталь: | HEAD LEVER UNIT |
| Парткод: | QM4-2768-000 |
| Деталь: | MULTI SENSOR UNIT |
| Парткод: | QM4-3668-000 |
| Деталь: | RETAINER, PAD |
| Парткод: | QC4-8936-000 |
| Деталь: | PAD, CLEANER |
| Парткод: | QC4-8935-000 |
| Деталь: | SLIDER, RAIL |
| Парткод: | QC4-8934-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | QC4-8948-000 |
| Деталь: | CARRIAGE PCB UNIT |
| Парткод: | QM3-4569-010 |
| Деталь: | CARRIAGE PCB UNIT |
| Парткод: | QM7-3602-000 |
| Деталь: | LEVER,SLANT |
| Парткод: | QC4-8937-000 |
| Деталь: | COUPLING |
| Парткод: | QC4-8938-000 |
| Деталь: | LABEL, SLANT |
| Парткод: | QC4-8944-000 |
| Деталь: | HOLDER, FLEXIBLE CABLE |
| Парткод: | QC4-8924-000 |
| Деталь: | FILM, FLEXIBLE CABLE |
| Парткод: | QC4-9440-000 |
| Деталь: | FLEXIBLE CABLE UNIT |
| Парткод: | QM3-4614-000 |
| Деталь: | CABLE, FLEXIBLE |
| Парткод: | QK1 -9687-000 |
| Деталь: | CABLE, FLEXIBLE |
| Парткод: | QK1-5143-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | QC4-8949-000 |
| Деталь: | MOTOR, DC |
| Парткод: | QK1-5068-000 |
| Деталь: | HARNESS, WIRE, INTERLOCK RELAY |
| Парткод: | QM7-3645-000 |
| Деталь: | HARNESS, WIRE, INTERLOCK |
| Парткод: | QM7-3624-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | CLAMP, CORD |
| Парткод: | WT2-5981-000 |
| Деталь: | BASKET |
| Парткод: | QC4-9460-000 |
| Деталь: | SUPPORT ROD UNIT |
| Парткод: | QM4-2867-000 |
| Деталь: | SUPPORT, ROD |
| Парткод: | QC4-9322-000 |
| Деталь: | GUIDE, BASKET |
| Парткод: | QC4-9334-000 |
| Деталь: | ROD, SIDE AL |
| Парткод: | QC4-9335-000 |
| Деталь: | PROTECTOR, ROD |
| Парткод: | QC4-9333-000 |
| Деталь: | LABEL, UNLOCK |
| Парткод: | QC4-9339-000 |
| Деталь: | GUIDE, BASKET, R |
| Парткод: | AY3-4560-010 |
| Деталь: | TRAY |
| Парткод: | QC4-9349-000 |
| Деталь: | STOPPER, TRAY |
| Парткод: | QC4-9348-000 |
| Деталь: | HANDLE, BASKET |
| Парткод: | QC4-9355-000 |
| Деталь: | SPACER, BASKET |
| Парткод: | QC4-9351-000 |
| Деталь: | JOINT, C, R |
| Парткод: | QC4-9354-000 |
| Деталь: | JOINT, C, L |
| Парткод: | QC4-9352-000 |
| Деталь: | JOINT, SLIDE, R |
| Парткод: | QC4-9347-000 |
| Деталь: | JOINT, SLIDE, L |
| Парткод: | QC4-9346-000 |
| Деталь: | LINK ARM UNIT (R) |
| Парткод: | QM4-2842-000 |
| Деталь: | LINK ARM UNIT (L) |
| Парткод: | QM4-2841-000 |
| Деталь: | JOINT, ROD |
| Парткод: | QC4-9345-000 |
| Деталь: | ROD, AL, A, 24 |
| Парткод: | QC4-9461-000 |
| Деталь: | ROD, AL, B, 24 |
| Парткод: | QC4-9462-000 |
| Деталь: | ROD, AL, C |
| Парткод: | QC4-9344-000 |
| Деталь: | ROD, AL, D, 24 |
| Парткод: | QC4-9464-000 |
| Деталь: | ROD, STOPPER, AL 24 |
| Парткод: | QC4-9463-000 |
| Деталь: | PAPER GUIDE UNIT |
| Парткод: | QM4-2834-000 |
| Деталь: | ROD, STOPPER 24 |
| Парткод: | QC4-9459-000 |
| Деталь: | PAPER STOPPER UNIT |
| Парткод: | QC4-9319-000 |
| Деталь: | BOX, ACCESSORY |
| Парткод: | QC4-9304-000 |
| Деталь: | HOOK, BASKET |
| Парткод: | QC4-9323-000 |
| Деталь: | CAP, STAND |
| Парткод: | QC4-9326-000 |
| Деталь: | CASTER, W/STOPPER |
| Парткод: | QC4-9332-000 |
| Деталь: | SCREW, HEX SOCKET M4X10 |
| Парткод: | QC4-9300-000 |
| Деталь: | SCREW, ALLEN, M8X16 |
| Парткод: | QC4-9330-000 |
| Деталь: | SCREW, HEX SOCKET, M4X30 |
| Парткод: | QC4-9303-000 |
| Деталь: | SCREW, STEPPED, M4 |
| Парткод: | QC4-9324-000 |
| Деталь: | SCREW, RS, M4X10 |
| Парткод: | XA9-0949-000 |
| Деталь: | BUSHING |
| Парткод: | XZ9-0697-000 |
| Деталь: | RIVET |
| Парткод: | XD9-0179-000 |
| Деталь: | HOLDER, ROD, R |
| Парткод: | QC4-9338-000 |
| Деталь: | HOLDER, ROD, L |
| Парткод: | QC4-9331-000 |
| Деталь: | LABEL, STAND L |
| Парткод: | QC4-9311-000 |
| Деталь: | LABEL, STAND R |
| Парткод: | QC4-9312-000 |
| Деталь: | SUCTION FAN UNIT |
| Парткод: | QM4-2817-000 |
| Деталь: | PLATEN SHUTTER DRIVE UNIT |
| Парткод: | QM4-2756-000 |
| Деталь: | MOTOR, STEPPING DC 10W UNDER |
| Парткод: | QK1 -0440-000 |
| Деталь: | PHOTOINTERRUPTER, GP1S173LCS0F |
| Парткод: | WG8-5849-000 |
| Деталь: | M/C HOLDER UNIT |
| Парткод: | QM4-2785-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9049-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9050-000 |
| Деталь: | GEAR, SHUTTER |
| Парткод: | QC4-8865-000 |
| Деталь: | MIST FAN DUCT UNIT |
| Парткод: | QM4-2797-000 |
| Деталь: | FAN UNIT |
| Парткод: | QM4-2798-000 |
| Деталь: | FAN |
| Парткод: | QK1-2086-000 |
| Деталь: | WASTE INK BOX UNIT |
| Парткод: | QM4-2753-000 |
| Деталь: | MICRO SWITCH |
| Парткод: | WC4-5052-000 |
| Деталь: | GEAR, 20T/72T |
| Парткод: | QC4-8873-000 |
| Деталь: | COVER, FRONT DUCT, LEFT |
| Парткод: | QC4-9075-000 |
| Деталь: | COVER, FRONT DUCT, RIGHT |
| Парткод: | QL2-6908-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9080-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9081-000 |
| Деталь: | ABSORBER, INK |
| Парткод: | QC4-9082-000 |
| Деталь: | SEAL, FRONT DUCT |
| Парткод: | QC4-9083-000 |
| Деталь: | CLIP, CORD |
| Парткод: | WT2-5056-000 |
| Деталь: | CLIP CLAMP, WIRE |
| Парткод: | WT2-5694-000 |
| Деталь: | SCREW, RS, M3X8 |
| Парткод: | XA9-1386-000 |
| Деталь: | M/C RELAY PCB ASSY |
| Парткод: | QM7-3606-000 |
| Деталь: | HARNESS, WIRE, TANK COVER L |
| Парткод: | QM7-3631-000 |
| Деталь: | SCREW, TP, M3X8 |
| Парткод: | XA9-1928-000 |
| Деталь: | JOINT, TUBE, COLOR |
| Парткод: | QC4-8861-000 |
| Деталь: | COVER SWITCH TOOL |
| Парткод: | QY9-0103-000 |
| Деталь: | LUBE, FLOIL G-5000H, GREASE |
| Парткод: | FY9-6022-000 |
| Деталь: | GREASE, EU-1 |
| Парткод: | FY9-6028-000 |
| Деталь: | TUBE, WASTE INK |
| Парткод: | AY3-4595-000 |
| Деталь: | W-INK TUBE, BLACK |
| Парткод: | AY3-4530-000 |
| Деталь: | SYRINGE |
| Парткод: | CK-0541-000 |
| Деталь: | STOPPER |
| Парткод: | QC2-6710-000 |
Коды ошибок
E000-0010
E000-0011
E000-0012
E000-0013
E000-0014
E000-0015
E000-0020
E000-0021
E000-0022
E000-0023
E000-0024
E000-0025
E000-0026
E000-0030
E000-0031
E000-0032
E000-0033
E000-0034
E001-0001
E001-0002
E001-0003
E001-00FF
E002-0010
E002-0020
E002-0030
E003-0041
E003-0042
E003-0043
E003-0051
E003-0052
E003-0053
E004-0001
E004-0002
E004-0003
E004-0004
E004-0005
E004-0006
E004-0007
E004-0008
E004-0009
E004-000A
E004-000B
E004-000C
E004-000D
E004-000E
E004-000F
E004-0010
E004-0020
E004-0030
E005-0000
E005-0010
E006-0001
E008-0001
E009-00FF
E012-0001
E013-0001
E013-0002
E014-0001
E020-xx10
E020-xx11
E020-xx12
E020-xx13
E020-xx81
E020-xx90
E020-xx91
E020-xx92
E020-xx93
E020-xxA0
E020-xxA1
E020-xxA2
E020-xxA3
E020-xxA9
E020-xxC0
E020-xxC1
E020-xxC2
E020-xxD0
E020-xxD1
E020-xxD2
E020-xxD4
E020-xxD5
E020-xxDA
E020-xxDB
E020-xxDC
E020-xxF1
E020-xxFF
E021-0001
E021-0002
E023-0001
E025-0001
E025-0002
E025-0410
E032-0001
E043-0001
E051-0001
E051-0002
E051-0003
E061-0001
E061-0002
E061-0003
E061-0005
E061-0007
E061-0008
E061-0010
E070-00xx
E070-01xx
E070-02xx
E070-03xx
E073-0001
E077-0001
E078-0001
E079-0001
E079-0002
E100-0001
E100-0002
E110-0001
E110-0002
E110-0003
E197-0002
E197-0003
E197-0004
E202-0001
E202-0002
E225-0001
E227-0001
E227-0002
E227-0003
E227-0004
E240-0000
E246-0001
E246-0002
E246-0003
E246-0004
E247-0001
E248-0000
E248-0001
E248-0002
E248-0003
E315-000E
E350-0000
E350-0001
E350-0002
E350-0003
E350-3000
E351-0000
E354-0001
E354-0002
E355-0001
E400-0001
E400-0002
E400-0003
E413-0001
E413-0002
E490-0001
E500-0001
E503-0002
E503-0003
E505-0001
E505-0002
E514-8001
E514-8002
E519-0002
E519-8001
E530-8001
E530-8002
E531-0001
E531-0002
E532-8001
E532-8002
E535-0003
E535-8001
E535-8002
E537-8001
E537-8002
E540-8001
E540-8002
E540-8003
E542-0003
E542-8001
E542-8002
E584-0002
E584-8001
E590-8001
E590-8002
E591-8001
E591-8002
E592-8001
E592-8002
E592-8003
E592-8004
E592-8005
E592-8006
E592-8007
E592-8008
E592-8009
E592-800A
E593-8001
E593-8002
E5F0-0001
E5F0-0002
E5F1-0001
E5F1-0002
E5F2-0001
E5F2-0002
E5F3-0001
E5F3-0002
E5F4-0001
E5F4-0002
E5F5-0001
E5F5-0002
E5F6-8001
E5F6-8002
E5F6-8003
E5F6-8004
E5F6-8005
E5F8-0001
E5F8-0002
E5F8-0003
E5F9-0001
E5F9-0002
E5F9-0003
E602
E604-0000
E609-0008
E609-0009
E610
E674-0001
E677-0003
E677-0010
E677-0080
E710-0001
E711-0002
E713-0001
E717-0001
E717-0002
E719-0001
E719-0002
E719-0011
E719-0012
E730
E731
E732-0001
E732-9999
E733-0000
E733-0001
E740-0002
E743-0000
E744
E745
E746-0003
E746-0004
E747
E748
E749-0001
E800-0001
E804-0004
E804-0007
E805-0003
E820-0002
E824-0000
E824-0001
Описание
| Error code: | E000-0010 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. After power-on, the temperature does not reach 50 deg C within 300 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0011 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 50 deg C, but does not reach 80 deg C within 300 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0012 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 80 deg C, but does not reach 110 deg C within 300 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0013 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 110 deg C, but does not reach 140 deg C within 300 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0014 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 140 deg C, but does not reach 170 deg C within 300 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0015 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 170 deg c, but does not reach 200 deg C within 300 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0020 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. After power-on, the temperature does not reach 50 deg C within 180 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0021 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 50 deg C, but does not reach 80 deg C within 180 sec. |
| Causes: | The fixing heater is faulty. The SSR is faulty. The fixing thermistor is faulty. The thermistor (TH1, TH2) has an open circuit. The thermal switch (TP1) has turned on. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0022 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 80 deg C, but does not reach 110 deg C within 180 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0023 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 110 deg C, but doest not reach 140 deg C within 180 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0024 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 140 deg C, but does not reach 170 deg C within 180 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0025 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 170 deg C, but does not reach 200 deg C within 180 sec. If the outside heating roller is in contact, within 400 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0026 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 200 deg C, but does not reach 230 deg C within 180 sec. If the outside heating roller is in contact, within 400 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0030 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. After power-on, the temperature does not reach 50 deg C within 420 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0031 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 50 deg C, but does not reach 80 C deg in 420 sec. |
| Causes: | The fixing heater is faulty. The SSR is faulty. The fixing thermistor is faulty. The thermistor (TH1, TH2) has an open circuit. The thermal switch (TP1) has turned on. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0032 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 80 deg C, but does not reach 110 deg C within 420 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0033 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 110 deg C, but does not reach 140 deg C within 420 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E000-0034 |
| Description: | At power-on, the rise in the temperature of the fixing assembly is not high enough. The main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4) has an open circuit or poor contact. The AC drive PCB or the DC controller PCB is faulty. The temperature reaches 140 deg C, but does not reach 170 deg C within 420 sec. |
| Remedy: | Check for an open circuit and poor contact in the main thermistor, thermal switch, and heater; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E001-0001 |
| Description: | Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (300 deg C) during temperature control. |
| Causes: | The sub thermistor detected a temperature of higher than 290 degree C. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E001-0002 |
| Description: | Abnormally high temperature rise of fixing unit (circuit trouble) When fixing sub-thermistor 1 has detected a high temperature (ASIC detection) |
| Causes: | The fixing film unit is faulty (i.e., the thermistor has a short circuit). The main power supply PCB is faulty. The DC controller PCB is faulty. Caution To clear the error, execute the following in service move: COPIER>FUNCTION>CLEAR>ERR. |
| Remedy: | Check the connection of the connector in the thermistor wiring (wirepinching, disconnection). Replace the fixing unit. Replace the IH unit, halogen heater, fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E001-0003 |
| Description: | Abnormally high temperature rise of fixing unit (circuit trouble) When fixing sub-thermistor 2 has detected a high temperature (ASIC detection) |
| Remedy: | Check the connection of the connector in the thermistor wiring (wirepinching, disconnection). Replace the fixing unit. Replace the IH unit, halogen heater, fixer and AC driver PCB. Replace the DC controller PCB 2 (MAISY). In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E001-00FF |
| Description: | The rise in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the following: main thermistor (THM1, THM2, THM3), sub thermistor (THM4, THM5, THM6), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB is faulty. When the cause (Detailed code) cannot be found in the DC controller PCB input-port as DC controller PCB detects instantly an abnormal signal from the thermistor. |
| Remedy: | After releasing the error with the procedure of COPIER>FUNCTION>CLEAR>ERR, 1. Turn off the switch of control panel. 2. Turn off the switch of main power. 3. Turn on the switch of main power. a. When the machine returns, Check the interconnection between the DC controller PCB and the thermistor. b. When the machine does not return, Follow the instruction the error (Detailed) code shows on the control panel. |
| Error code: | E002-0010 |
| Description: | The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. The temperature of the fixing roller reaches 80 deg C, but drops below 50 deg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E002-0020 |
| Description: | The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. The temperature of the outside heating roller reaches 80 deg C, but drops below 50 deg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E002-0030 |
| Description: | The rise in the temperature of the fixing assembly is not enough. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. The temperature of the pressure roller reaches 80 deg C, but drops below 50 deg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E003-0041 |
| Description: | After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. During standby, the temperature of the fixing roller drops below 150 deg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E003-0042 |
| Description: | After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. During standby, the temperature of the outside heating roller drops below 190 dg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E003-0043 |
| Description: | After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. During standby, the temperature of the pressure roller drops below 120 deg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E003-0051 |
| Description: | After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. During copying, the temperature of the fixing roller drops below 150 deg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E003-0052 |
| Description: | After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. During copying, the temperature of the outside heating roller drops below 190 deg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E003-0053 |
| Description: | After standby, the drop in the temperature of the fixing assembly is excessive. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3), thermal switch (TP1, TP2, TP3), or heater (H1, H2, H3, H4). The AC driver PCB or the DC controller PCB has a fault. During copying, the temperature of the pressure roller drops below 60 deg C. |
| Remedy: | Check the main thermistor, thermal switch, and heater for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0001 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0002 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the fixing sub heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0003 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater or the fixing sub heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0004 |
| Description: | Mismatch of Fixing Assembly type |
| Causes: | A fixing assembly of another product was installed. |
| Remedy: | 1. Replace the fixing assembly with that of this product. |
| Error code: | E004-0005 |
| Description: | Fixing Relay fusion error |
| Causes: | At power ON or recovery from sleep mode, a zero cross signal was detected three times during the period of 100 ms after completion of CPU initialization. |
| Remedy: | 1. Check the harness/connector between the Fixing Assembly and the DC Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the DC Controller PCB. |
| Error code: | E004-0006 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the fixing sub heater or the fixing main heater |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0007 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater, fixing sub heater, or fixing main heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0008 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the pressure heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0009 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater or the contact heater |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-000A |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the fixing sub heater or the contact heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-000B |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater, fixing sub heater, or contact heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-000C |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an error in the fixing main heater or the contact heater |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-000D |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater, fixing main heater, or contact heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-000E |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an error in the fixing sub heater, fixing main heater, or contact heater.N>CLEAR>ERR. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-000F |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. There is an SSR error in the outside heating roller heater, fixing sub heater, fixing main heater, or contact heater. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0010 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The fixing roller thermistor has an open circuit. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0020 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The outside heating roller thermistor has an open circuit. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E004-0030 |
| Description: | There is an error in the fixing assembly protection circuit. There is an open circuit or poor contact in the main thermistor (THM1, THM2, THM3) or sub thermistor (TH4, THM5, THM6). The AC driver PCB or the DC controller PCB has a fault. The pressure roller thermistor has an open circuit. |
| Remedy: | Check the main thermistor and the sub thermistor for an open circuit and poor contact; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E005-0000 |
| Description: | There is an error in the take-up mechanism of the web. The web of the fixing assembly has been fully taken up. After the web sensor has detected an off state, the count has exceeded 3000. The web length sensor (PS20) is faulty. The DC controller PCB is faulty. |
| Remedy: | Reset in service mode: COPIER>FUNCTION>CLEAR>ERR. If you have replaced the web, reset the reading in the following, and turn off and then on the power: COPIER>COUNTER>DRBL-1>FIX-WEB. |
| Error code: | E005-0010 |
| Description: | There is an error in the take-up mechanism of the web. The drive solenoid of the fixing assembly is not connected. |
| Remedy: | Check the drive solenoid of the fixing web for disconnection; then, reset in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Error code: | E006-0001 |
| Description: | The fixing assembly has a comparison error. The fixing drawer has been identified as being disconnected. |
| Causes: | The fixing drawer has poor contact. The fixing assembly is absent. |
| Remedy: | Check the connector of the drive solenoid of the fixing web; then, turn off and then on the main power. |
| Error code: | E008-0001 |
| Description: | Fixing unit end-of-life detection error Fixing unit end-of-life detection error |
| Remedy: | Occurs when the fixing unit end-of-life is detected or when the belt pushoff temporary escape mode was executed but normal operation was not restored. |
| Error code: | E009-00FF |
| Description: | There is an outside heating roller shift error. The outside heating roller shift motor (M22) is faulty. The outside heating roller HP sensor (PS21) is faulty. The DC controller PCB is faulty. The outside heating roller remains in contact with the fixing roller |
| Remedy: | Check the outside heating roller shift motor and the fixing motor; then, turn off and then on the main power. |
| Error code: | E012-0001 |
| Description: | Error in ITB motor activation. |
| Causes: | If the ITB motor speed detection signal comes off the specified cycle after it turned once to the specified cycle. Cause Failure in ITB motor, failure in DC controller PCB. |
| Remedy: | - Check the connectors of ITB motor and DC controller PCB - Replace the ITB motor - Replace the DC controller PCB |
| Error code: | E013-0001 |
| Description: | There is clogging by waste toner. There is a waste toner full error. the soft counter reading is 250000 or higher. |
| Causes: | The waste toner feedscrew has locked. The waste toner feed motor is faulty. The transfer high-voltage PCB is faulty. The serial driver PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | Check the amount of waste toner; then, turn off and then on the main power. |
| Error code: | E013-0002 |
| Description: | There is clogging by waste toner. There is a waste toner feedscrew error. The output of the waste toner lock detecting switch (SW14) is `1` for more than 1 sec. |
| Causes: | The waste toner feedscrew has locked. The waste toner feed motor is faulty. The transfer high-voltage PCB is faulty. The serial driver PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | Check the developing motor; then, turn off and then on the main power. |
| Error code: | E014-0001 |
| Description: | Fixing motor failure |
| Causes: | Fixing motor rotation error The motor rotated out of the target speed during rotation after the target speed was reached. |
| Remedy: | Check the contact of the connector between the fixing motor (J516) and the DC controller PCB (J81). Check the gear between the fixing motor and the fixing assembly. Replace the fixing motor. |
| Error code: | E020-xx10 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Sig value is lower than 62. The ATR sensor is damage or has an open circuit. The connector may have poor contact. The intermediate transfer belt may be soiled. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xx11 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Ref value is lower than 62. The ATR sensor is damaged or has an open circuit. The connector may have poor contact. The intermediate transfer belt may be soiled |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xx12 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Sig value is 960 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. The opening/closing of the shutter is faulty. The intermediate transfer belt is soiled. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xx13 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the Ref value is 960 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. The intermediate transfer belt is soiled |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xx81 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Density value is extremely low for the ITB surface reflectivity when the new drum unit was installed. SALT sensor trouble. Dirty ITB. |
| Remedy: | Replace the SALT sensor (clean the sensor window). Replace the drum unit (check its connections). Replace the ITB (clean it). |
| Error code: | E020-xx90 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The result (Sig D) of computation based on the reading of the patch during patch detection (analog)) is lower than 16. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xx91 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The result (Sig D) of computation based on the reading of the patch during patch detection (analog) is 1008 or higher. The patch sensor is damaged or has an open circuit. The connector has poor contact. The primary transfer pressure is faulty. The mounting of the developing assembly is faulty. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xx92 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The value delta D obtained from the result (Sig D) of computation based on the reading of the patch during patch detection is -5.0% or more 3 times continuously. The patch sensor may be damaged or has an open circuit. The connector has poor contact. The primary transfer engagement is faulty. The mounting of the developing assembly is faulty. The amount of supply is low. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xx93 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The value delta D obtained from the result (Sig D) of computation based on the reading of the patch during patch detection is +5.0% or lower 3 times continuously. The patch sensor is damaged or has an open circuit. The connector has poor contact. The primary transfer pressure is faulty. The mounting of the developing assembly is faulty. The amount of supply is low. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxA0 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Measured value of the detected developer density is extremely low. Trouble in the ATR sensor. Trouble in the drum unit. |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xxA1 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For ATR control, the Ref value is lower than 62. The ATR sensor is damaged or has an open circuit. The connector has poor contact. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxA2 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For ATR control, the Sig value is 960 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. The opening/closing of the shutter is faulty. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxA3 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For ATR control, the Ref value is 960 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxA9 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The T/D ratio identified for ATR control has exceeded the lower limit (3%) 3 times continuously. The ATR sensor is damaged or has an open circuit. The connector has poor contact. The amount of supply is too low. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxC0 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk Trouble in the supply of the toner from the toner cartridge to the developer. Too much toner is supplied to the developer. Broken or disconnected wire in the ATR sensor. |
| Remedy: | Replace the drum unit (check its connections). |
| Error code: | E020-xxC1 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The variation among the 8 samplings of the light Ref value is 100 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxC2 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The variation among the 8 samplings of the patch Sig value is 400 or higher. The patch sensor is damaged or has an open circuit. The connector has poor contact. The primary transfer engagement is faulty |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxD0 |
| Description: | Concerning the first two digits of the details code in xx12 to xxD0 xx=01: Y xx=02: M xx=03: C xx=04: Bk No toner is supplied from the toner cartridge to the developer. TCRG motor fails to run. An empty cartridge is being used. The toner supply port of the drum unit is damaged. Broken or disconnected wire in the ATR sensor. |
| Remedy: | Replace the toner cartridge motor. Replace the drum unit (check its connections). |
| Error code: | E020-xxD1 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the average of the light Ref values is 462 or lower. The ATR sensor is damaged or has an open circuit. The connector has poor contact. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxD2 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction Fore INIT control (service mode INISET-*) at time of initial setup, the average of the patch Sig values is 200 or lower. The patch sensor is damaged or has an open circuit. the connector has poor contact. The primary transfer engagement is faulty. The mounting of the developing assembly is faulty. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxD4 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INTI control (service mode INISET-*) at time of initial setup, the average of the light Sig values is 800 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. The amount of supply is too high. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxD5 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INTI control (service mode INISET-*) at time of initial setup, the average of the light Ref values is 562 or higher. The ATR sensor is damaged or has an open circuit. The connector has poor contact. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxDA |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the variation among the 72 night Sig value samplings is 100 or more. The ATR sensor is damaged or has an open circuit. The connector has poor contact. The stirring of toner is faulty. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxDB |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*) at time of initial setup, the variation among the 72 light Ref samplings is 100 or more. The ATR sensor is damaged or has an open circuit. The connector has poor contact. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxDC |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction For INIT control (service mode INISET-*), the average of the patch Sig values is 800 or higher. The patch sensor is damaged or has an open circuit. The connector has poor contact. the primary transfer engagement if faulty. The mounting of the developing assembly is faulty. The amount of supply is too high. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E020-xxF1 |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction The connector or the color toner supply clutch is not connected. |
| Remedy: | Turn off and then on the main power; then, execute ITB cleaning. |
| Error code: | E020-xxFF |
| Description: | There is an ATR error. xx=01 for Y; xx=02 for M; xx=03 for C; xx=04 for without color distinction There is no toner inside the Bk developing assembly. - the toner is not supplied to the developing assembly correctly. - the hopper stirring motor is not rotating normally. The hopper connector has poor contact. The black toner supply motor (M25) is faulty. The hopper stirring motor (M23) is faulty. The black toner level sensor is faulty. The DC controller is faulty. |
| Remedy: | Turn off and then on the main power; then, execute the intermediate transfer belt. |
| Error code: | E021-0001 |
| Description: | There is an error in the rotation of the developing assembly. The developing rotary home position is not detected. The motor rotates out of sync because of poor torque caused by any of the following: The developing rotary HP sensor is faulty; the wiring of the DC controller is faulty; there is an excess load on the developing assembly. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E021-0002 |
| Description: | There is an error in the rotation of the developing assembly. The length of the flag detected during rotation is longer or shorter than the designed flag. The motor rotates out of sync because of poor torque caused by any of the following: the developing rotary HP sensor is faulty; the wiring of the DC controller PCB is faulty; there is an excessive load on the developing assembly. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E023-0001 |
| Description: | The developing motor (M3) does not rotate normally. After motor start-up, a lock state is not detected for 1 sec or more. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E025-0001 |
| Description: | There is an over-current in the hopper stirring motor (M23)or the black toner supply motor (M25). There is an overcurrent in the hopper stirring motor (M23). |
| Remedy: | Turn off and then on the main power. |
| Error code: | E025-0002 |
| Description: | There is an over-current in the hopper stirring motor (M23)or the black toner supply motor (M25). There is an over-current in the black toner supply motor (M25). |
| Remedy: | Turn off and then on the main power. |
| Error code: | E025-0410 |
| Description: | There is an over-current in the hopper stirring motor (M23)or the black toner supply motor (M25). The connector of the black toner supply motor (M25) is identified as being disconnected. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E032-0001 |
| Description: | NE controller counter operation failure When the counter function of the NE controller does not work |
| Causes: | The DA unit is faulty. The main controller PCB is faulty. |
| Remedy: | Check the cable connections. |
| Error code: | E043-0001 |
| Description: | There is an error in the 3.5K paper deck pickup motor, causing an error signal. After motor start-up, a lock state is not detected for 1 sec or more. The mechanical load such as on the feeding system is excessive. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E051-0001 |
| Description: | The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The horizontal registration home position is not detected within a specific period of time. |
| Causes: | The side registration sensor (S32) is faulty. The side registration motor (M17) is faulty. The duplex driver PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E051-0002 |
| Description: | The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The ON edge of the SUS plate is not detected during a search for home position. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E051-0003 |
| Description: | The horizontal registration home position is not detected within a specific period of time. The horizontal registration position is faulty (0003). The logical motor position differs between before and after the detection operation. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E061-0001 |
| Description: | At time of potential control, a specific level of potential is absent. Or, the limiter goes on. When forming an image, the potential is 10 V or less during initial rotation. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E061-0002 |
| Description: | At time of potential control, a specific level of potential is absent. Or, the limiter goes on. At time of potential control, the potential is 10 V or less during initial rotation |
| Remedy: | Turn off and then on the main power. |
| Error code: | E061-0003 |
| Description: | At time of potential control, a specific level of potential is absent. Or, the limiter goes on. While the grid bias is being adjusted, a level of potential higher than the grid bias is sampled. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E061-0005 |
| Description: | At time of potential control, a specific level of potential is absent. Or, the limiter goes on. The difference in potential between dark and light areas is less than 100 V. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E061-0007 |
| Description: | At time of potential control, a specific level of potential is absent. Or, the limiter goes on. During adjustment of EPC offset, the potential that is read is outside the +/-30 V range. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E061-0008 |
| Description: | At time of potential control, a specific level of potential is absent. Or, the limiter goes on. During dark area potential adjustment, the sampling value is too low. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E061-0010 |
| Description: | At time of potential control, a specific level of potential is absent. Or, the limiter goes on. The sampling of the light area potential is faulty. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E070-00xx |
| Description: | There is an error in the detection of the ITB home position. xx=01: ITB home position sensor B, xx=02: ITB home position sensor A; only at ITB 1/1 speed; XX=00: no distinction The home position of the intermediate transfer belt is not detected within a specific period of time . The ITB HP sensor is faulty. |
| Remedy: | Turn off the main power, and check the DC controller PCB and the ITB HP sensor; then, turn on the main power. |
| Error code: | E070-01xx |
| Description: | There is an error in the detection of the ITB home position. xx=01: ITB home position sensor B, xx=02: ITB home position sensor A; only at ITB 1/1 speed; XX=00: no distinction The period of time between when the home position of the intermediate transfer belt is detected and the next home position is detected is longer than specified . The presence of a tear may have caused the sensor to wrongly identify it as indicating the home position. |
| Remedy: | Turn off the main power, and check the drive of the intermediate transfer belt; then, turn on the main power. |
| Error code: | E070-02xx |
| Description: | There is an error in the detection of the ITB home position. xx=01: ITB home position sensor B, xx=02: ITB home position sensor A; only at ITB 1/1 speed; XX=00: no distinction The period of time between when the home position of the intermediate transfer belt is detected and when the next home position is detected is shorter than specified . The intermediate transfer belt slips on the drive roller, causing a delay in the timing at which the home position is detected. |
| Remedy: | Turn off the main power, and check the surface of the intermediate transfer belt for a tear; then, turn on the main power. |
| Error code: | E070-03xx |
| Description: | There is an error in the detection of the ITB home position. xx=01: ITB home position sensor B, xx=02: ITB home position sensor A; only at ITB 1/1 speed; XX=00: no distinction The detection of the home position of the intermediate transfer belt has failed once. ITB home position sensor B and ITB home position sensor A must occur alternately; however, the same state has been detected continuously. |
| Remedy: | Turn off the main power, and check the DC controller PCB and the ITB HP sensor; then turn on the main power. |
| Error code: | E073-0001 |
| Description: | With the front door closed, the transfer drawer connector or the transfer frame drawer connector is not connected. The result of detecting the feed unit indicates the absence of the unit. |
| Causes: | The transfer drawer connector has poor contact. The transfer unit is absent. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E077-0001 |
| Description: | The home position of the secondary transfer roller (engagement) is not detected. The HP sensor does not go on within 5 sec after the start of a HP search. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E078-0001 |
| Description: | Primary transfer disengagement mechanism failure |
| Causes: | Primary transfer disengagement mechanism failure At the time of searching the home position: Considering that the coupling of primary transfer engagement/ disengagement drive may not be connected, the solenoid was pulled for maximum 6 times in the condition where the flag was detected once. But the HP sensor did not detect the color print engagement position. * If a flag is not detected even once, it is considered that the ITB unit is absent. At the time of changing the position The position after turning ON/OFF of the solenoid did not match the HP sensor value. |
| Remedy: | Check whether the ITB unit is installed or not. Reconnect the connector J181 on the DC controller PCB. Check the primary transfer roller disengagement switch in the sensor monitor mode. If a failure is found, replace the primary transfer roller disengagement switch assembly. Execute the primary transfer roller engagement/disengagement drive test in the actuator drive mode. If the primary transfer roller does not perform engagement/disengagement, replace the fixing drive unit. |
| Error code: | E079-0001 |
| Description: | The home position of the outside heating roller is not detected. The outside heating roller home position sensor does not go off. The HP sensor does not turn on within 5 sec after the start of an HP search. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E079-0002 |
| Description: | The home position of the outside heating roller is not detected. The outside heating roller home position sensor does not go off. If there is an open circuit in the home position sensor of the outside heating roller home position sensor, the state of the sensor will be identified as being ON. An error will be identified if the sensor fails to go off when it is at a point where it must normally go on and the outside heating roller shift motor is driven. |
| Remedy: | Turn off and then on the main power. |
| Error code: | E100-0001 |
| Description: | Error detection on any of scanner motor, laser unit, and BD detection at scanner area. |
| Causes: | Magenta optical assembly failure |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Laser Scanner Unit. (2) Replace the DC Controller Board. |
| Error code: | E100-0002 |
| Description: | Optical assembly error (Laser) |
| Causes: | Cyan optical assembly failure |
| Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
| Error code: | E110-0001 |
| Description: | Optical assembly error (Scanner motor) |
| Causes: | Optical assembly error (Scanner motor rotation failure) |
| Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
| Error code: | E110-0002 |
| Description: | Error in first artificial BD adjustment |
| Causes: | Primary pseudo BD correction |
| Error code: | E110-0003 |
| Description: | There is a scanner motor error. The FG signal is not detected while the polygon scanner is rotating stably. |
| Remedy: | Turn off the main power, and check the DC controller PCB and the 24V system fuse; then, turn on the main power. |
| Error code: | E197-0002 |
| Description: | Firmware error |
| Causes: | Unknown engine firmware error |
| Remedy: | 1. Turn OFF and then ON the power. 2. Update firmware. 3. Replace the DC Controller PCB. |
| Error code: | E197-0003 |
| Description: | There is an error in the communication with the fixing feed PCB. Following the end of initialization of the communication between the DC controller and the fixing/feeding unit, as many as 10 communication errors occur continuously. |
| Remedy: | Turn off the main power, and check the DC controller PCB wiring and the 24V system fuse; then, turn on the main power. |
| Error code: | E197-0004 |
| Description: | There is an error in the communication with the fixing feed PCB. At the start of drum initial multiple rotation, there is no signal indicating the start of 24V in the fixing assembly in the communication between the DC controller and the fixing/feeding unit. |
| Remedy: | Turn off the main power, and check the DC controller PCB wiring and the 24V system fuse; then, turn on the main power. |
| Error code: | E202-0001 |
| Description: | Reader HP sensor fault |
| Causes: | Reader HP outward fault The CCD unit moves backward, but does not move to the home position. |
| Remedy: | - Replace reader HP sensor. - Replace reader motor sensor. - Replace reader unit. |
| Error code: | E202-0002 |
| Description: | Contact Sensor HP error, Failure in return |
| Causes: | Reader HP homeward fault - Replace reader unit. The CCD unit moves forward, but does not move to the home position. |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor. (2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor. (3) Replace the Contact Sensor. (4) Replace the Main Controller Board. |
| Error code: | E225-0001 |
| Description: | Light intensity of a lamp is less or equal to the criteria |
| Causes: | When the light intensity is at the reference level or below at shading. |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor. (2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor. (3) Replace the Contact Sensor. (4) Replace the Main Controller Board. |
| Error code: | E227-0001 |
| Description: | Reader unit power supply error When the 24 V port is OFF when the power is turned ON. |
| Remedy: | Disconnect and re-connect the power connector. Replace the power supply |
| Error code: | E227-0002 |
| Description: | Reader unit power supply error When the 24 V port is OFF when a job is started. |
| Remedy: | Disconnect and re-connect the power connector. Replace the power supply |
| Error code: | E227-0003 |
| Description: | Reader unit power supply error When the 24 V port is OFF when a job is finished. |
| Remedy: | Disconnect and re-connect the power connector. Replace the power supply |
| Error code: | E227-0004 |
| Description: | Reader unit power supply error When the 24 V port is OFF during load drive. |
| Remedy: | Disconnect and re-connect the power connector. Replace the power supply |
| Error code: | E240-0000 |
| Description: | Error in communication between main controller and DC controller Serial communication error |
| Causes: | The main controller PCB is faulty. The DC controller PCB is faulty. |
| Remedy: | Check the connector connections. Check the DC controller PCB (MAISY). Replace the No.1 main controller circuit. |
| Error code: | E246-0001 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E246-0002 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E246-0003 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E246-0004 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E247-0001 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E248-0000 |
| Description: | There is an error in the EEPROM. At time of start-up, a check error has occurred on the SRAM board |
| Remedy: | Turn off the main power, and check the SRAM board; then, as necessary, replace the SRAM board, and turn on the main power. |
| Error code: | E248-0001 |
| Description: | EEPROM access error |
| Causes: | Error at EEPROM power-on EEPROM data cannot be read at power-on. |
| Remedy: | Replace reader unit. |
| Error code: | E248-0002 |
| Description: | EEPROM access error |
| Causes: | Error in EEPROM writing EEPROM writing cannot be performed. |
| Remedy: | Replace reader unit. |
| Error code: | E248-0003 |
| Description: | EEPROM access error |
| Causes: | Error in EEPROM reading after writing EEPROM reading cannot be performed after writing is performed. |
| Remedy: | Replace reader unit. |
| Error code: | E315-000E |
| Description: | codex error An error has occurred in the course of software decoding. |
| Error code: | E350-0000 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E350-0001 |
| Description: | Fault in the soft ID PCB/function An error has occurred in the course of full data read operation on the soft ID PCB. |
| Remedy: | Turn off the main power, and check the connection of the soft ID PCB. If the remedy fails, replace the soft ID PCB. |
| Error code: | E350-0002 |
| Description: | Fault in the soft ID PCB/function The value of the check sum area of all data read from the soft ID PCB and the result of checksum computation do not match. |
| Remedy: | Turn off the main power, and replace the soft ID PCB. If the remedy fails, replace the soft ID PCB. |
| Error code: | E350-0003 |
| Description: | Fault in the soft ID PCB/function The values in the soft ID check sum area of FRAM, SRAM1, and SRAM2 and the result of a check sum computation differ. |
| Remedy: | Turn off the main power, and check the connection of the soft ID PCB. If the remedy fails, replace the soft ID PCB. |
| Error code: | E350-3000 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E351-0000 |
| Description: | Main controller PCB fault |
| Causes: | Internal error of the main controller PCB Cause Main controller PCB fault. |
| Remedy: | - Check the connection of main controller PCB. - Replace main controller PCB. |
| Error code: | E354-0001 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E354-0002 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E355-0001 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E400-0001 |
| Description: | Feeder communication error Checksum error |
| Remedy: | Check the connections between the ADF controller PCB and main controller PCB (sub). Replace the ADF controller PCB. Replace the main controller PCB (sub). |
| Error code: | E400-0002 |
| Description: | Feeder communication error Reception status error |
| Remedy: | Check the connections between the ADF controller PCB and main controller PCB (sub). Replace the ADF controller PCB. Replace the main controller PCB (sub). |
| Error code: | E400-0003 |
| Description: | Feeder communication error Reception interrupt error |
| Remedy: | Check the connections between the ADF controller PCB and main controller PCB (sub). Replace the ADF controller PCB. Replace the main controller PCB (sub). |
| Error code: | E413-0001 |
| Description: | Pressure motor trouble Pressure HP sensor OPEN |
| Remedy: | Replace the pressure motor. |
| Error code: | E413-0002 |
| Description: | Pressure motor trouble Pressure HP sensor CLOSE |
| Remedy: | Replace the pressure motor. |
| Error code: | E490-0001 |
| Description: | Wrong model error When the feeder of another model has been detected |
| Remedy: | Connect the feeder for this unit. |
| Error code: | E500-0001 |
| Description: | Finisher communication error Data communication could not be performed normally. It has been retried three times in vain. |
| Remedy: | - Check the connectors of the finisher controller PCB and DC controller PCB for normal connection. - Replace the finisher controller PCB. - Replace the DC controller PCB. |
| Error code: | E503-0002 |
| Description: | Saddle communication error When communication with the saddle stitcher is interrupted |
| Remedy: | - Check the connections between the saddle stitcher controller PCB and finisher controller PCB. - Replace the saddle stitcher controller PCB and finisher controller PCB. |
| Error code: | E503-0003 |
| Description: | There is an error in the communication within the finisher (finisher R1/R2). finisher-to-punch unit communication error |
| Causes: | A communication error has been detected. |
| Remedy: | Check the connection between the Punch controller PCB and the finisher controller PCB. |
| Error code: | E505-0001 |
| Description: | Finisher backup memory error When the checksum value calculated by the CPU differs from the checksum values of the data held inside the RAM |
| Causes: | The backup RAM is faulty. |
| Remedy: | Replace the finisher controller PCB. |
| Error code: | E505-0002 |
| Description: | Finisher backup memory error When the verify processing is not completed even after 2000 ms have elapsed during data writing |
| Causes: | The EEPROM is faulty. The finisher controller PCB is faulty. The puncher driver PCB is faulty. |
| Remedy: | Replace the finisher controller PCB. |
| Error code: | E514-8001 |
| Description: | Bundling (forward rotation direction) error When the trailing edge fails to leave the trailing edge assist home position even when the trailing edge assist motor has been driven for 3 sec. |
| Remedy: | Replace the trailing edge assist motor (M109) and trailing edge assist home position sensor (PI109). |
| Error code: | E514-8002 |
| Description: | Bundling (forward rotation direction) error When the trailing edge fails to return to the trailing edge assist home position even when the trailing edge assist motor has been driven for 3 sec. |
| Remedy: | Replace the trailing edge assist motor (M109) and trailing edge assist home position sensor (PI109). |
| Error code: | E519-0002 |
| Description: | There is an error in the gear change motor (finisher R1/R2). The home position sensor does not go on within a specific period of time after the gear change motor has started to rotate. |
| Remedy: | 1) Check the gear change home position sensor. Is the sensor normal? 2) Check the wiring between the fisher controller PCB and the gear change motor. Is the wiring normal? 3) Check the gear change mechanism. Is there a fault? 4) Try replacing the gear change motor. Is the problem corrected? |
| Error code: | E519-8001 |
| Description: | There is an error in the gear change motor (finisher R1/R2). The home position sensor does not go off within a specific period of time after the gear change motor has started to rotate. |
| Remedy: | 1) Check the gear change home position sensor. Is the sensor normal? 2) Check the wiring between the fisher controller PCB and the gear change motor. Is the wiring normal? 3) Check the gear change mechanism. Is there a fault? 4) Try replacing the gear change motor. Is the problem corrected? |
| Error code: | E530-8001 |
| Description: | Alignment error When the alignment plate fails to leave the alignment plate front home position sensor position even when the alignment plate front motor was driven for 4 sec. |
| Remedy: | Replace the alignment plate front motor (M103) and alignment plate front home position sensor (PI106). |
| Error code: | E530-8002 |
| Description: | Alignment error When the alignment plate fails to return to the alignment plate front home position sensor position even when the alignment plate front motor was driven for 4 sec. |
| Remedy: | Replace the alignment plate front motor (M103) and alignment plate front home position sensor (PI106). |
| Error code: | E531-0001 |
| Description: | - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure - The staple home position was not left when 400 ms have lapsed since start of staple operation. |
| Causes: | The stapler motor (M6) is faulty. The stapler home position sensor detecting switch (MS7) is faulty. |
| Remedy: | - Check the connector of the staple unit. - Replace the staple unit. - Replace the finisher controller PCB. |
| Error code: | E531-0002 |
| Description: | - Staple unit failure - Staple HP sensor failure - Finisher controller PCB failure - The staple home position had been left once, but it was not reached again when 400 ms have lapsed since start of staple operation. In addition, the staple home position could not be reached by performing reverse operation for 400 ms. |
| Causes: | The stapler motor (M6) is faulty. The stapler home position sensor detecting switch (MS7) is faulty. |
| Remedy: | - Check the connector of the staple unit. - Replace the staple unit. - Replace the finisher controller PCB. |
| Error code: | E532-8001 |
| Description: | There is an error in the shift mechanism of the stapler. (finisher R1/R2) The home position sensor does not go off within a specific period of time after the stapler shift motor has started to rotate. |
| Remedy: | 1) Check the stapler shift home position sensor. Is the sensor normal? 2) Check the wiring between the finisher controller PCB and the stapler shift motor. Is the wiring normal? 3) Check the path of the stapler shift base. Is there a mechanical obstacle? 4) Try replacing the stapler shift motor. Is the problem corrected? |
| Error code: | E532-8002 |
| Description: | There is an error in the shift mechanism of the stapler. (finisher R1/R2) The home position sensor does not go on within a specific period of time after the stapler shift motor has started to rotate. |
| Remedy: | 1) Check the stapler shift home position sensor. Is the sensor normal? 2) Check the wiring between the finisher controller PCB and the stapler shift motor. Is the wiring normal? 3) Check the path of the stapler shift base. Is there a mechanical obstacle? 4) Try replacing the stapler shift motor. Is the problem corrected? |
| Error code: | E535-0003 |
| Description: | There is an error in the staple swing mechanism. (finisher R1/R2) There is an error in relation to an hazardous area.. |
| Causes: | The delivery motor (M2) is faulty. The swing guide closed detecting switch 2 (MS6) is faulty. |
| Remedy: | 1) Check the swing home position sensor. Is the sensor normal? 2) Check the writing between the finisher controller PCB and the swing motor. Is the wiring normal? 3) Check the swing mechanism. Is there a fault? 4) Try replacing the swing motor. Is the problem corrected? |
| Error code: | E535-8001 |
| Description: | Oscillation error When the stapler fails to leave the oscillation home position even though the oscillator motor was driven for 3 sec. |
| Remedy: | Replace the oscillator motor (M106) and oscillation home position sensor (PI105). |
| Error code: | E535-8002 |
| Description: | Oscillation error Occurs when the oscillation guide close switch fails to be set to ON even when the oscillator motor is run in the reverse direction for 1 sec. |
| Remedy: | Replace the oscillator motor (M106) and oscillation home position sensor (PI105). |
| Error code: | E537-8001 |
| Description: | Front alignment error When the alignment plate fails to leave the alignment plate back home position sensor position even though the alignment plate back motor was driven for 4 sec. |
| Remedy: | Replace the alignment plate back motor (M104) and alignment plate back home position sensor (PI107). |
| Error code: | E537-8002 |
| Description: | Front alignment error When the alignment plate fails to return to the alignment plate back home position sensor position even though the alignment plate back motor was driven for 4 sec. |
| Remedy: | Replace the alignment plate back motor (M104) and alignment plate back home position sensor (PI107). |
| Error code: | E540-8001 |
| Description: | Tray up/down error - When the tray fails to return to the home position even when the 1st tray shift motor has been driven for 20 sec. - When the tray fails to move to another area even when the 1st tray shift motor has been driven for 4 sec. |
| Remedy: | - Check the 1st tray shift area sensor connectors. - Replace the 1st tray shift area sensor. - Replace the 1st tray shift motor (M107) |
| Error code: | E540-8002 |
| Description: | Tray up/down error When a danger area is reached before the sheet level is detected by the 1st tray sheet level detection sensor during the sheet level detection operation - When a discontinuous area was detected during the tray operation |
| Remedy: | - Check the 1st tray shift area sensor connectors. - Replace the 1st tray shift area sensor. - Replace the 1st tray shift motor (M107) |
| Error code: | E540-8003 |
| Description: | Tray up/down error When the input of the clock signal could not be detected within 0.2 sec. during the operation of the 1st tray shift motor |
| Remedy: | - Check the 1st tray shift area sensor connectors. - Replace the 1st tray shift area sensor. - Replace the 1st tray shift motor (M107) |
| Error code: | E542-0003 |
| Description: | - Optional tray motor or finisher controller PCB failure - Optional tray HP sensor failure - Optional tray clock sensor failure - Optional tray shift motor load failure - The optional tray was moved upward, but it did not reach the HP sensor within 3000 ms. |
| Remedy: | - Check the connector of the optional tray HP sensor. - Check the connector of the optional tray clock sensor. - Check the connector of the optional tray shift motor. - Replace the optional tray HP sensor. - Replace the optional tray clock sensor. - Replace the optional tray shift motor. - Replace the finisher controller PCB. |
| Error code: | E542-8001 |
| Description: | Tray shift error When the tray fails to return to the home position even when the 2nd tray shift motor has been driven for 20 sec. - When the tray fails to move to another area even when the 2nd tray shift motor has been driven for 4 sec. |
| Remedy: | - Check the 2nd tray shift area sensor board connectors. - Replace the 2nd tray shift area sensor board. - Replace the 2nd tray shift motor (M108). |
| Error code: | E542-8002 |
| Description: | Tray shift error - When the upper limit area is reached before the sheet level is detected by the 2nd tray sheet level detection sensor 1 during a sheet level detection operation - When a discontinuous area was detected during the tray operation - When the fact that the area ahead of the 2nd tray sheet level detection sensor 2 has been reached is detected before the sheet level is detected by the 2nd tray sheet level detection sensor 2 during an escape operation |
| Remedy: | - Check the 2nd tray shift area sensor board connectors. - Replace the 2nd tray shift area sensor board. - Replace the 2nd tray shift motor (M108). |
| Error code: | E584-0002 |
| Description: | - Shutter drive motor or finisher controller PCB failure - Shutter open detection sensor failure - Shutter clutch failure - The shutter open sensor did not turn off when 1000 ms have lapsed since the shutter unit had performed close operation, resulting in incomplete close operation. |
| Causes: | The feed motor (M1) is faulty. The shutter open sensor (PI5) is faulty. |
| Remedy: | - Check the connector of the shutter open sensor. - Check the connector of the shutter clutch. - Check the connector of the shutter motor. - Replace the shutter open sensor. - Replace the shutter clutch. - Replace the shutter drive motor. - Replace the finisher controller PCB. |
| Error code: | E584-8001 |
| Description: | Tray unit trouble When the shutter fails to leave the shutter home position even when the binding motor has been driven for 3 sec. |
| Remedy: | - Check the shutter home position sensor connectors. - Replace the shutter home position sensor. - Replace the shutter open/close clutch (CL101). - Replace the binding bottom roller clutch (CL102). - Replace the binding motor (M102). |
| Error code: | E590-8001 |
| Description: | When the puncher cannot detect the punch home position sensor even when the punch motor is driven for 200 ms |
| Remedy: | - Check the punch home position sensor (P163) and punch motor clock sensor (P162) connectors. - Replace the punch home position sensor (P163) and punch motor clock sensor (P162) connectors. - Replace the punch motor (M61). |
| Error code: | E590-8002 |
| Description: | When the puncher cannot detect the punch home position sensor after motor drive has stopped during the initial operation of the punch motor |
| Remedy: | - Check the punch home position sensor (P163) and punch motor clock sensor (P162) connectors. - Replace the punch home position sensor (P163) and punch motor clock sensor (P162) connectors. - Replace the punch motor (M61). |
| Error code: | E591-8001 |
| Description: | When the light sensing voltage is less than 3.0 V even though the lightemitting duty ratio of the waste full detection sensor has been set to more than 66% |
| Remedy: | - Check the waste full detection sensor (LED6, PTR6) connectors. - Replace the waste full detection sensors (LED6, PTR6). |
| Error code: | E591-8002 |
| Description: | When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of the waste full detection sensor has been set to 0% |
| Remedy: | - Check the waste full detection sensor (LED6, PTR6) connectors. - Replace the waste full detection sensors (LED6, PTR6). |
| Error code: | E592-8001 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is less than 2.5 V even though the lightemitting duty ratio of the sheet trailing edge sensor has been set to more than 66% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-8002 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of the sheet trailing edge sensor has been set to 0% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-8003 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is less than 2.5 V even though the lightemitting duty ratio of side registration sensor 1 (LED1, PTR1) has been set to more than 66% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-8004 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of side registration sensor 1 (LED1, PTR1) has been set to 0% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-8005 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is less than 2.5 V even though the lightemitting duty ratio of side registration sensor 2 (LED2, PTR2) has been set to more than 66% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-8006 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of side registration sensor 2 (LED2, PTR2) has been set to 0% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-8007 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is less than 2.5 V even though the lightemitting duty ratio of side registration sensor 3 (LED3, PTR3) has been set to more than 66% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-8008 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of side registration sensor 3 (LED3, PTR3) has been set to 0% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-8009 |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is less than 2.5 V even though the lightemitting duty ratio of side registration sensor 4 (LED4, PTR4) has been set to more than 66% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E592-800A |
| Description: | Sheet trailing edge, side registration sensor error When the light sensing voltage is more than 2.0 V even though the lightemitting duty ratio of side registration sensor 4 (LED4, PTR4) has been set to 0% |
| Remedy: | - Check the sheet trailing edge sensor (LED5, PTR5) and side registration sensor (LED1-4, PTR1-4) connectors. - Replace the sheet trailing edge sensor (LED5, PTR5) and side registration sensors (LED1-4, PTR1-4). |
| Error code: | E593-8001 |
| Description: | Side registration initializing error When the side registration fails to leave the side registration home position sensor position even when the punch slide unit is moved 9 mm during the initial operation of the side registration motor |
| Remedy: | - Check the side registration home position sensor (P161) connectors. - Replace the side registration home position sensor (P161). - Replace the side registration motor (M62). |
| Error code: | E593-8002 |
| Description: | Side registration initializing error When the side registration fails to return to the side registration home position sensor position even when the punch slide unit is moved 37 mm during the initial operation of the side registration motor |
| Remedy: | - Check the side registration home position sensor (P161) connectors. - Replace the side registration home position sensor (P161). - Replace the side registration motor (M62). |
| Error code: | E5F0-0001 |
| Description: | There is an error in saddle paper positioning. The paper positioning plate home position sensor does not turn on when the paper positioning plate motor has been driven for 1.33 sec. The paper positioning plate motor (M4S) or the paper positioning plate home position sensor (PI7S) is faulty. |
| Causes: | The positioning plate motor (M4S) is faulty. The power positioning plate home position sensor (PI7S) is faulty. |
| Remedy: | Check the paper positioning plate motor (M4S) /paper positioning plate home position sensor (PI7S). |
| Error code: | E5F0-0002 |
| Description: | There is an error in saddle paper positioning. The paper positioning plate home position sensor does not turn off when the paper positioning plate motor has been driven for 1 sec. The paper positioning plate motor (M4S) or the paper positioning plate home position sensor (PI7S) is faulty. |
| Causes: | The positioning plate motor (M4S) is faulty. The power positioning plate home position sensor (PI7S) is faulty. |
| Remedy: | Check the paper positioning plate motor (M4S) /paper positioning plate home position sensor (PI7S). |
| Error code: | E5F1-0001 |
| Description: | There is an error in saddle paper folding. The number of detection pulses of the paper folding motor clock sensor is lower than specified. The paper folding home position sensor or the paper folding motor clock sensor (P14S) is faulty. |
| Causes: | The folding motor (M2S) is faulty. The folding motor clock sensor (PI4S) is faulty. |
| Remedy: | Check the paper folding motor (M2S) /paper folding motor clock sensor (PI4S). |
| Error code: | E5F1-0002 |
| Description: | There is an error in saddle paper folding. The state of the paper folding home position sensor does not change when the paper folding motor has been driven for 3 sec. The paper folding motor (M2S) or the paper folding motor clock sensor (P14S) is faulty. |
| Causes: | The folding roller home position sensor (PI12) is faulty. The stapler/folder motor (M7) is faulty. The stapler/folder clock sensor (PI14) is faulty. The finisher controller PCB is faulty. |
| Remedy: | Check the paper folding motor (M2S) /paper folding motor clock sensor (PI4S). |
| Error code: | E5F2-0001 |
| Description: | There is an error in the saddle guide. The guide home position sensor does not turn on when the guide motor has been driven for 0.45 sec. The guide motor (M3S) or the guide home position sensor (PI3S) is faulty. |
| Causes: | The guide motor (M3S) is faulty. The guide home position sensor (PI13S) is faulty. |
| Remedy: | Check the guide motor (M3S) /guide home position sensor (PI13S). |
| Error code: | E5F2-0002 |
| Description: | There is an error in the saddle guide. The guide home position sensor doest not turn off when the guide motor has been driven for 1 sec. The guide motor (M3S) or the guide home position sensor (PI3S) is faulty. |
| Causes: | The guide motor (M3S) is faulty. The guide home position sensor (PI13S) is faulty. |
| Remedy: | Check the guide motor (M3S) /guide home position sensor (PI13S). |
| Error code: | E5F3-0001 |
| Description: | There is an error in saddle alignment. The aligning plate home position sensors does not turn on when the alignment motor has been driven for 05. sec (during initialization, 1.67 sec). The alignment motor (M5S) or the aligning plate home position sensor (PI5S) is faulty. |
| Causes: | The alignment motor (M5S) is faulty. The alignment plate home position sensor (PI5S) is faulty. |
| Remedy: | Check the alignment motor (M5S) /aligning plate home position sensor (PI5S). |
| Error code: | E5F3-0002 |
| Description: | There is an error in saddle alignment. The alignment plate home position sensor does not turn off when the alignment motor has been driven for 1 sec. The alignment motor (M5S) for the alignment plate home position sensor (PI5S) is faulty. |
| Causes: | The alignment motor (M5S) is faulty. The alignment plate home position sensor (PI5S) is faulty. |
| Remedy: | Check the alignment motor (M5S) /aligning plate home position sensor (PI5S). |
| Error code: | E5F4-0001 |
| Description: | There is an error in saddle rear sampling. The stitching home position sensor does not turn on when the stapler motor (rear) is rotated in reverse for 0.5 sec or more. The switch motor (rear, M65) or the stitching home position sensor (rear, MS5S) is faulty. |
| Causes: | The stitch motor (rear, M6S) is faulty. The stitching home position switch (rear, PS2S) is faulty. |
| Remedy: | Check he stitching motor (rear; M6S) /stitching home position sensor (rear; MS5S) |
| Error code: | E5F4-0002 |
| Description: | There is an error in saddle rear sampling. The stitching home position sensor does not turn off when the switch motor (rear) is reverse for 0.5 sec or more. The switch motor (rear, M6S) or the stitching home position sensor (rear, MS5S) is faulty. |
| Causes: | The stitch motor (rear, M6S) is faulty. The stitching home position switch (rear, PS2S) is faulty. |
| Remedy: | Check he stitching motor (rear; M6S) /stitching home position sensor (rear; MS5S). |
| Error code: | E5F5-0001 |
| Description: | There is an error in saddle front stapling. The stitching home position sensor does not turn on when the switch motor (front) is rotated in reverse for 0.5 sec or more. The stitch motor (front, M7S) or the stitching home position sensor (front, MS7S) is faulty. |
| Causes: | The stitching motor (front, M7S) is faulty. The stitching motor operating home position switch (front, PS4S) is faulty. |
| Remedy: | Check the stitching motor (front; M7S) /stitching home position sensor (front; MS7S). |
| Error code: | E5F5-0002 |
| Description: | There is an error in saddle front stapling. The stitching home position sensor does not turn off when the switch motor (front) is rotated in normal direction for 0.5. The stitch motor (front, M7S) or the switching home position sensor (front, MS7S) is faulty. |
| Causes: | The stitching motor (front, M7S) is faulty. The stitching motor operating home position switch (front, PS4S) is faulty. |
| Remedy: | Check the stitching motor (front; M7S) /stitching home position sensor (front; MS7S). |
| Error code: | E5F6-8001 |
| Description: | Saddle sheet push plate stapler error When the sheet push plate home position sensor fails to turn ON even when the sheet push plate motor has been run for at least 0.3 sec. |
| Remedy: | - Check the sheet push plate home position sensor (P114S) connectors. - Replace the sheet push plate home position sensor (P114S). - Replace the sheet push plate motor (M8S). |
| Error code: | E5F6-8002 |
| Description: | Saddle sheet push plate stapler error When the sheet push plate home position sensor fails to turn OFF even when the sheet push plate motor has been run for at least 80 ms |
| Remedy: | - Check the sheet push plate home position sensor (P114S) connectors. - Replace the sheet push plate home position sensor (P114S). - Replace the sheet push plate motor (M8S). |
| Error code: | E5F6-8003 |
| Description: | Saddle sheet push plate stapler error When the sheet push plate edge position sensor fails to turn OFF even when the sheet push plate motor has been run for at least 80 ms |
| Remedy: | - Check the sheet push plate home position sensor (P114S) connectors. - Replace the sheet push plate home position sensor (P114S). - Replace the sheet push plate motor (M8S). |
| Error code: | E5F6-8004 |
| Description: | Saddle sheet push plate stapler error When the number of pulses detected by the sheet push plate motor clock sensor has dropped below the prescribed number |
| Remedy: | - Check the sheet push plate home position sensor (P114S) connectors. - Replace the sheet push plate home position sensor (P114S). - Replace the sheet push plate motor (M8S). |
| Error code: | E5F6-8005 |
| Description: | Saddle sheet push plate stapler error When the sheet push plate edge position sensor fails to turn ON even when the sheet push plate motor has been run for at least 0.3 sec. |
| Remedy: | - Check the sheet push plate home position sensor (P114S) connectors. - Replace the sheet push plate home position sensor (P114S). - Replace the sheet push plate motor (M8S). |
| Error code: | E5F8-0001 |
| Description: | There is an error in the saddle connector. The connector of the guide home position sensor is identified as being disconnected. The connector of the guide home position sensor (PI3S) is faulty. |
| Causes: | The guide home position sensor (PI13S) has a faulty connector. |
| Remedy: | Check the connectors of the guide home position sensor (PI13S). Check the connectors of the paper pushing plate home position sensor (PI4S). |
| Error code: | E5F8-0002 |
| Description: | There is an error in the saddle connector. The connector of the paper pushing plate home position sensor is identified as being disconnected. The connector of the paper pushing plate home position sensor (PI14S) is faulty. |
| Causes: | The paper push-on plate home position sensor (PI14) has a faulty connector. |
| Remedy: | Check the connectors of the paper pushing plate leading edge position sensor (PI5S). |
| Error code: | E5F8-0003 |
| Description: | There is an error in the saddle connector. The connector of the paper pushing plate leading edge position sensor is identified as being disconnected. The connector of the paper pushing plate leading edge sensor (PI15S) is faulty. |
| Causes: | The paper push-on plate leading edge sensor (PI15S) has a faulty connector. |
| Remedy: | Check the connectors of the paper pushing plate leading edge position sensor (PI5S). |
| Error code: | E5F9-0001 |
| Description: | There is an error in the saddle switch. With any of the following sensor is identifying its respective cover a being closed, the inlet cover switch is identified as being open for 1 sec or more after the start of the initial rotation of the machine or the start of printing: - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cover sensor (PI3S) Or, the front cover switch (MS2S) or the delivery cover switch (MS3S) is open. The inlet cover switch (MS1S), front cover switch (MS2S), or delivery cover switch (MS3S) is faulty. |
| Causes: | The inlet door open detecting switch (MS1S) is faulty. The inlet door sensor (PI9S) is faulty. |
| Remedy: | Check the inlet cover switch (MS1S)/front cover switch (MS2S)/delivery cover switch (MS3S). |
| Error code: | E5F9-0002 |
| Description: | There is an error in the saddle switch. With any of the following sensor is identifying its respective cover as being closed, the front cove switch is identified as being open for 1 sec or more after the start of the initial rotation of the machine or the start of printing: - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cove sensor (PI3S) The front cove switch (MS2S) or the delivery cover switch (MS3S) is faulty. |
| Causes: | The front door open detecting switch (MS2S) is faulty. The front door open sensor (PS2S) is faulty. |
| Remedy: | Check the front cover switch (MS2S)/delivery cover switch (MS3S). |
| Error code: | E5F9-0003 |
| Description: | There is an error in the saddle switch. With any of the following sensors identifying its respective cover as being closed, the delivery cover switch is identified as being open for 1 sec or more after the start of the initial rotation of the machine or the start of printing: - inlet cover sensor (PI9S) - front cover open/closed sensor (PI2S) - delivery cover sensor (PI3S) - delivery cover switch (MS3S) |
| Causes: | The delivery door open detecting switch (MS3S) is faulty. The delivery door open sensor (PI3S) is faulty. |
| Remedy: | Check the delivery cover switch (MS3S). |
| Error code: | E602 |
| Description: | Yellow TCR Sensor adjustment failure - TCR Sensor automatic adjustment does not function properly, failing to adjust to an appropriate value. |
| Causes: | • Photoconductor Unit /C • Photoconductor Unit /M • Photoconductor Unit /Y • Toner Supply Motor Y/M (M6) • Toner Supply Motor C/K (M7) • Mechanical Control Board (PWB-M) • Controller Board (PWB-P) |
| Remedy: | 1 Clean the TCR Sensor window on the underside of the Photoconductor Unit if dirty - - 2 M6, M7 operation check PWB-M CNDM2-10 to 13 (M6) PWB-M CNDM3-10 to 13 (M7) C-22 C-23 3 Reinstall Photoconductor Unit - - 4 Change Photoconductor Unit - - 5 Change PWB-M - - 6 Change PWB-P |
| Error code: | E604-0000 |
| Description: | Memory error |
| Causes: | Lack of memory capacity |
| Remedy: | Check the memory capacity inserted to each slot. |
| Error code: | E609-0008 |
| Description: | Hard disk trouble When the HDD fails to reach the prescribed temperature within the prescribed period of time when it is started up |
| Remedy: | Replace with an HDD which is guaranteed to operate at low temperatures. |
| Error code: | E609-0009 |
| Description: | Hard disk trouble When the HDD fails to reach the prescribed temperature when its operation is restored from the sleep mode |
| Remedy: | Replace with an HDD which is guaranteed to operate at low temperatures. |
| Error code: | E610 |
| Description: | 1st Image Transfer ATVC (color) failure - An abnormal average value is detected while performing the first image transfer ATVC of color. |
| Causes: | • Transfer Belt Unit • Transfer Roller • High Voltage Unit |
| Remedy: | 1 Check if the Transfer Roller and Transfer Belt are dirty and correct as necessary. - - 2 Change High Voltage Unit - - 3 Change Transfer Belt Unit |
| Error code: | E674-0001 |
| Description: | There is an error in the fax board. The fax board is detected, but communication is not possible. |
| Remedy: | Turn off the main power, and check the fax board and the main controller PCB; then, turn on the main power. If the machine fails to reset, replaced the fax board or the main controller PCB |
| Error code: | E677-0003 |
| Description: | There is an external controller error. An error has been detected by a check on the configuration when the external controller is being started up. |
| Remedy: | Turn off the main power, and check the cable; then, turn on the main power. If the machine fails to start up, re-install the system software of the external contro |
| Error code: | E677-0010 |
| Description: | There is an external controller error. A controller for a non-Canon machine is connected. |
| Remedy: | Turn off the main power, and check the controller is an appropriate type, and check the cable; then turn on the main power. If the machine fails to reset, re-install the system software of the external controller. |
| Error code: | E677-0080 |
| Description: | There is an external controller error. There is an error in the communication with the printer after the external controller has started up normally. |
| Causes: | The connection between the host machine and the PDL board is faulty. The system software is faulty. The hard disk is faulty. The PDL board is faulty. The system controller PCB of the host machine is faulty. |
| Remedy: | Turn off the main power, and check the cable; then, turn on the main power. If the machine fails to start up, re-install the system software of the external controller. |
| Error code: | E710-0001 |
| Description: | IPC initializing error When the ready status fails to be established within 3 sec. after the IPC chip started up |
| Causes: | The DC controller PCB is faulty. The reader controller PCB is faulty. The machine controller PCB is faulty. |
| Remedy: | Check the cable connections. |
| Error code: | E711-0002 |
| Description: | There is an IPC communication error. An error has been detected 4 times or more within 1.5 sec after the communication has been interrupted between the finisher and the printer, and the machine does not reset. |
| Causes: | The connector has poor connection. The ADF controller PCB is faulty. The finisher controller PCB is faulty. The DA unit PCB is faulty. The card reader PCB is faulty. |
| Remedy: | Turn off the main power, and check the cable; then, turn on the main power. If the machine fails to reset, check the connector between the finisher and the copier for poor contact; as necessary, replace the finisher controller/DC controller. |
| Error code: | E713-0001 |
| Description: | There is a finisher communication error. There is an error in the IC used for communication by the sorter. |
| Remedy: | Turn off the main power switch, and check the wiring of the DC controller PCB and the finisher controller PCB, and check the 24V system fuse: then, turn on the main power switch. If the machine does not reset, replace the DC controller PCB/finisher controller PCB. |
| Error code: | E717-0001 |
| Description: | Error in communication with NE controller When the NE controller which was connected before the power was turned OFF could not be recognized when the power was turned back ON |
| Causes: | The wiring is faulty (short circuit, open circuit). The DA unit PCB is faulty. The main controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Remedy: | Check the cable connections. |
| Error code: | E717-0002 |
| Description: | Error in communication with NE controller When the IPC has a broken or disconnected wire or when an error has occurred where IPC communication cannot be recovered |
| Remedy: | In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR. |
| Error code: | E719-0001 |
| Description: | Error in communication with coin vendor/card reader When the coin vendor which was connected before the power was turned OFF could not be recognized when the power was turned back ON |
| Causes: | The wiring is faulty (short circuit, open circuit). The Card Reader-C1 is faulty. The coin vendor is faulty. The main controller PCB is faulty. Caution To clear the error, execute the following in service mode: COPIER>FUNCTION>CLEAR>ERR. |
| Remedy: | Check the cable connections. |
| Error code: | E719-0002 |
| Description: | Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Causes: | Erroneous communication with coin vendor (serial communication) - Disconnection from the coin vendor has been detected since communication started after confirmation of normal connection to the coin vendor (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Remedy: | - Check the connection between the image processor PCB and serial PCB. - Check the connectors of the serial PCB and coin vendor for normal connection. - Replace the serial PCB. - Check the coin vendor. - Replace the image processor PCB. |
| Error code: | E719-0011 |
| Description: | Error in communication with coin vendor/card reader When the card reader which was connected before the power was turned OFF could not be recognized when the power was turned back ON |
| Remedy: | In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR |
| Error code: | E719-0012 |
| Description: | Error in communication with coin vendor/card reader When a wire in the IPC cable connected with the card reader is broken or disconnected or when an error has occurred where IPC communication cannot be recovered |
| Remedy: | In the service mode, clear the error by selecting COPIER > FUNCTION > CLEAR > ERR |
| Error code: | E730 |
| Description: | PDL error |
| Remedy: | Turn the main power OFF and back ON. Check the OPEN interface board and cable connections. Replace the external controller. Replace the OPEN interface board. Replace the main controller PCB. |
| Error code: | E731 |
| Description: | Stop jam at the original exit sensor: The trailing edge of the original does not pass the original exit sensor after its leading edge has reached this sensor |
| Causes: | Original exit sensor RADF board Perform the 05-3210 Roller Exit roller |
| Remedy: | 1. Clean the exit roller and the exit intermediate roller if they are stained. 2. Is the original exit sensor working? (Perform the input check: 03-[FAX]ON/[7]/[E]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN75 on the RADF board is disconnected from the original exit sensor or the harnesses are open circuited. Correct if any. 4. Replace the original exit sensor. 5. Replace the RADF board, and then perform the automatic adjustment for the original reading start sensor (05-356). 6. Replace the exit roller and the exit intermediate roller if they are worn out. |
| Error code: | E732-0001 |
| Description: | Scanner communication error |
| Causes: | Scanner communication error |
| Remedy: | 1. Update the firmware. 2. Replace the Main Controller PCB. |
| Error code: | E732-9999 |
| Description: | There is an error in reader communication. Although a printer model, the machine is identified as a reader unit at start-up. (A copier model is started up as a printer model when the RAM is initialized.) |
| Remedy: | Turn off and then on the main power. |
| Error code: | E733-0000 |
| Description: | Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
| Causes: | Printer communication error (communication error at initial communication and negotiation packet error) |
| Remedy: | - Check the connectors of the DC controller PCB and image processor PCB for normal connection. - Check the power supply of the printer (Check whether initialization is performed at startup). - Replace the DC controller PCB or image processor PCB. |
| Error code: | E733-0001 |
| Description: | Printer communication error (Invalid communication after communication is established, Parity error) |
| Remedy: | Turn on the power again. Replace the DC controller PCB. |
| Error code: | E740-0002 |
| Description: | Error detection on either Network Board or Mac address |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the connection of the network cable. (2) Replace the Main Controller Board. |
| Error code: | E743-0000 |
| Description: | Error in main controller communication An error in reading of/writing to the Flash ROM in the Main Controller occurred. |
| Causes: | Software sequence error |
| Remedy: | 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB. |
| Error code: | E744 |
| Description: | Stop jam at the original exit/reverse sensor |
| Causes: | Original exit/reverse sensor RADF board Perform the 05-3210 Roller Intermediate transport roller |
| Remedy: | 1. Clean the exit/reverse intermediate roller if it is stained. 2. Is the original exit/reverse sensor working? (Perform input check: 03: [FAX]/ON/[5]/[B]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN75 on the RADF board is disconnected from the original exit/reverse sensor or the harnesses are open-circuited. Correct if this is the case. 4. Replace the original exit/reverse sensor. 5. Replace the RADF board, and then perform the automatic adjustment for the original reading start sensor (05-356). 6. Replace the exit/reverse intermediate roller, if it is worn out. |
| Error code: | E745 |
| Description: | Jam not reaching the original exit/reverse sensor |
| Causes: | Original exit reverse sensor RADF board Perform the 05-3210 Roller |
| Remedy: | 1. Clean the exit intermediate roller if it is stained. 2. Is the original exit/reverse sensor working? (Perform input check: 03: [FAX]/ON/[5]/[B]) * If it is working properly, proceed to 6. If not, check 3 to 5 below. 3. Check if the connector CN75 on the RADF board is disconnected from the original exit/reverse sensor or the harnesses are open-circuited. Correct if this is the case. 4. Replace the original exit/reverse sensor. 5. Replace the RADF board, and then perform the automatic adjustment for the original reading start sensor (05-356). 6. Replace the exit intermediate roller, if it is worn out. |
| Error code: | E746-0003 |
| Description: | The accessories board is of the wrong type. At time of start-up, the UFR board is found to be of the wrong type. (A query is made to find out if the type is correct with reference to the engine ID.) |
| Remedy: | Replace it with a UFR board of the correct type. |
| Error code: | E746-0004 |
| Description: | The accessories board is of the wrong type. At time of start-up, the scanner board is found to be of the wrong type. (A query is made to find out if the type is correct with reference to the engine ID.) |
| Remedy: | Replace it with a scanner board of the correct type. |
| Error code: | E747 |
| Display: | E747 |
| Description: | Optical Fan Motor error. When the lock signal is detected continuously for the predetermined time during fan rotation. |
| Causes: | • Fuser Fan Motor (M7) • PH Fan Motor (M8) • Suction Fan Motor (M13) • Ozone Fan Motor (M9) • PS Fan Motor (M6) • PU Fan Motor (M12) |
| Remedy: | 1 Check the motor connector connection status, and correct if it is improper. 2 Check the load status of the fan section, and correct if it is improper. 3 Check the operation of M8. p115 PWB-A CNF2-A-1(REM) 5-G 4 Replace the PWB-A. |
| Error code: | E748 |
| Description: | Internal cooling fan motor error. When the lock signal is detected continuously for the predetermined time during fan rotation. |
| Causes: | • Fuser Fan Motor (M7) • PH Fan Motor (M8) • Suction Fan Motor (M13) • Ozone Fan Motor (M9) • PS Fan Motor (M6) • PU Fan Motor (M12) |
| Remedy: | 1 Check the motor connector connection status, and correct if it is improper. 2 Check the load status of the fan section, and correct if it is improper. 3 Check the operation of M12. p115 PWB-A CNF3-A-1(REM) 7-C 4 Replace the PWB-A. |
| Error code: | E749-0001 |
| Description: | Instruction to restart accompanying change in product configuration When the existing BootROM has been replaced with the BootROM of a different kind (when a PDL option was installed, etc.) |
| Remedy: | Reset by turning the main power OFF and back ON. |
| Error code: | E800-0001 |
| Description: | The interlock 24V mechanism of the fixing unit is identified as being off. With the door closed, the interlock 24V mechanism remains off for 500 msec. |
| Causes: | The electric system has an error. The DC controller PCB is faulty. |
| Remedy: | Turn off the main switch, and check the wiring of the DC controller PCB, check the fixing unit interlock, and check the 24V system fuse; then, turn on the interlock main switch. |
| Error code: | E804-0004 |
| Description: | Controller Fan error Since the startup of the Controller Fan, the Fan was locked for a specified consecutive period of time. |
| Causes: | Power supply cooling fan does not rotate in the specified rotation speed. Cause: Problem in power supply cooling fan / DC controller PCB |
| Remedy: | 1. Check power supply to the Controller Fan. 2. Replace the Controller Fan. |
| Error code: | E804-0007 |
| Description: | There is any of the various types of fan errors. There is an error in the power supply cooling fan. |
| Remedy: | Turn off the main switch, and check the DC controller PCB and the 24V system fuse; then, turn on the main switch. |
| Error code: | E805-0003 |
| Description: | Fan failure |
| Causes: | Controller fan failure detected The controller fan does not rotate because some kind of failure occurred in it. |
| Remedy: | Replace the controller fan. |
| Error code: | E820-0002 |
| Description: | There is an error in the process unit cooling fan. There is an error in the process unit fan. |
| Remedy: | Turn off the main switch, and check the wiring of the DC controller PCB and the 24V system fuse; then, turn on the main switch. |
| Error code: | E824-0000 |
| Description: | There is an error in the primary charging suction/primary charging exhaust fan. There is an error in the primary charging suction mechanism. |
| Remedy: | Turn off the main power, and check the DC controller PCB and the 24V system fuse; then, turn on the main switch. |
| Error code: | E824-0001 |
| Description: | There is an error in the primary charging suction/primary charging exhaust fan. There is an error in the primary exhaust fan. |
| Remedy: | Turn off the main switch, and check the wiring of the DC controller PCB and 2V system fuse; then, turn on the main switch. |
