Canon i-SENSYS MF744Cdw
Рейтинг
Актуальный
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
50000
Скорость печати
A4
27
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Макс. формат |
A4 |
Цветность печати |
цветная |
Число страниц в месяц |
50 000 |
Область применения |
средний офис |
Размещение |
настольный |
Телефон |
|
Печать фотографий |
|
Копир |
|
Тип устройства |
МФУ |
Факс |
|
Сканер |
|
Технология печати |
лазерная |
Принтер |
|
Время разогрева |
13 |
Макс, ширина отпечатка |
216 |
Система непрерывной подачи чернил |
|
Пигментные чернила |
|
Печать без полей |
|
Прямая печать |
|
Двусторонняя печать |
|
Количество цветов |
4 |
Макс, длина отпечатка |
356 |
Макс, разрешение для ч/б печати |
|
| По Y | 1 200 |
| По X | 1 200 |
Скорость ч/б печати |
|
| A4 | 27 |
Время выхода первого отпечатка |
|
| Цветн, | 8,6 |
| Ч/б | 7,7 |
Копир |
|
Время выхода первой копии |
9,8 |
Макс, количество копий за цикл |
999 |
Шаг масштабирования |
0,01 |
Значение масштаба |
|
| Максимальное | 4 |
| Минимальное | 0,25 |
Макс, разрешение (ч/б) |
|
| По X | 600 |
| По Y | 600 |
| По X | 400 |
Сканер |
|
Емкость устройства автоподачи оригиналов |
50 |
Оттенки серого |
256 |
Тип сканера |
планшетный/протяжный |
Глубина цвета |
24 бит |
Устройство автоподачи оригиналов |
двустороннее |
Стандарт WIA |
|
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Слайд-адаптер |
|
Макс. формат оригинала |
A4 |
Макс, размер сканирования |
|
| По X | 216 |
| По Y | 356 |
Разрешение сканера |
|
| По Y | 400 |
| По Х (улучшенное) | 9 600 |
| По Y (улучшенное) | 9 600 |
| По Х | 600 |
Расходные материалы |
|
Ресурс цветного картриджа/тонера |
2 100 |
Ресурс ч/б картриджа/тонера |
2 300 |
Количество картриджей |
4 |
Печать на: |
|
| Этикетках |
|
| Матовой бумаге |
|
| Карточках |
|
| Конвертах |
|
| Глянцевой бумаге |
|
| Рулоне |
|
| Фотобумаге |
|
| CD/DVD |
|
| Пленках |
|
Плотность бумаги |
|
| Максимальная | 200 |
| Минимальная | 60 |
Факс |
|
PC Fax |
|
Память |
512 |
Макс, скорость передачи данных |
33,6 Кбит/с |
Телефон |
|
Автоответчик |
|
Стандарт DECT |
|
Беспроводная трубка |
|
Caller ID |
|
Проводная трубка |
|
Спикерфон |
|
АОН |
|
Шрифты и языки управления |
|
Языки управления |
|
| PCL 5c |
|
| PCL 6 |
|
| PostScript 3 |
|
| PostScript |
|
| PPDS |
|
| PostScript 2 |
|
Количество установленных шрифтов |
|
| PCL | 93 |
| PostScript | 136 |
Лотки |
|
Емкость лотка ручной подачи |
50 |
Подача бумаги |
|
| Максимальная | 850 |
| Стандартная | 300 |
Вывод бумаги |
|
| Стандартный | 150 |
| Максимальный | 10 |
Финишер |
|
Степлер |
|
Брошюровщик |
|
Сортер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Bluetooth |
|
Инфракрасный порт |
|
RS-232 |
|
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
LPT |
|
Wi-Fi |
|
Веб-интерфейс |
|
AirPrint |
|
Поддержка Android |
|
USB |
|
Ethernet (RJ-45) |
|
Wi-Fi 802.11n |
|
Поддержка iOS |
|
Память/Процессор |
|
Объем памяти |
1 024 |
Частота процессора |
800 |
Дополнительная информация |
|
Экран |
|
Работа от аккумулятора |
|
Диагональ дисплея |
5 |
Поддержка ОС |
|
| DOS |
|
| Windows |
|
| Linux |
|
| Mac OS |
|
Потребляемая мощность |
|
| При работе | 530 |
| В режиме ожидания | 18 |
Уровень шума |
|
| При работе | 50 |
| В режиме ожидания | 28 |
Габариты |
|
Высота |
460 |
Вес |
26,7 |
Ширина |
471 |
Глубина |
469 |
Модули
102 INTERNAL COMPONENTS 1
100C EXTERNAL COVERS, PANELS, ETC. FAX model
160 READER/ADF ASSEMBLY
161A PAPER FEEDER ASSEMBLY SINGLE PASS ADF
330 TRANSFER MOUNT ASSEMBLY
100D EXTERNAL COVERS, PANELS, ETC. WITHOUT FAX model
101D INTERNAL COMPONENTS 1 MF745, MF746
400D READER ASSEMBLY SINGLE SIDE ADF
105B INTERNAL COMPONENTS 5 120V
102A INTERNAL COMPONENTS 2 100V, 120V
FRAME L
103 INTERNAL COMPONENTS 3
105C INTERNAL COMPONENTS 5 230V
161B PAPER FEEDER ASSEMBLY SINGLE SIDE ADF
102B INTERNAL COMPONENTS 2 230V
101E INTERNAL COMPONENTS 1 MF743
400C READER ASSEMBLY SINGLE PASS ADF
PAPER FEED
DUPLEX
101F NPN RF INTERNAL COMPONENTS 1 MF741
104 INTERNAL COMPONENTS 4
Детали 160 READER/ADF ASSEMBLY
| Деталь: | Мотор привода картриджей |
| Парткод: | RM2-7342-000CN |
| Цена: | 6 300 ₽ |
| Деталь: | Мотор привода узла переноса изображения |
| Парткод: | RM2-7344-000CN |
| Цена: | 5 900 ₽ |
| Деталь: | Мотор привода узла термозакрепления |
| Парткод: | RM2-7349-000CN |
| Цена: | 6 100 ₽ |
| Деталь: | Мотор привода узла захвата бумаги |
| Парткод: | RM2-7350-000CN |
| Цена: | 1 300 ₽ |
| Деталь: | COVER, FRONT, LEFT |
| Парткод: | FE8-2996-000 |
| Деталь: | COVER, FRONT, RIGHT |
| Парткод: | FE8-2997-000 |
| Деталь: | COVER, REAR, UPPER |
| Парткод: | FE8-2998-000 |
| Деталь: | COVER, ARM, LEFT |
| Парткод: | FE8-3066-000 |
| Деталь: | COVER, ARM, RIGHT |
| Парткод: | FE8-3067-000 |
| Деталь: | COVER, ARM, CENTER |
| Парткод: | FE8-3068-000 |
| Деталь: | COVER, PANEL, REAR UPPER |
| Парткод: | FE8-3069-000 |
| Цена: | 470 ₽ |
| Деталь: | COVER, PANEL, REAR UNDER |
| Парткод: | FE8-3070-000 |
| Цена: | 700 ₽ |
| Деталь: | COVER, PANEL, LOWER |
| Парткод: | FE8-3071-000 |
| Цена: | 650 ₽ |
| Деталь: | COVER, PANEL, REAR |
| Парткод: | FE8-3263-000 |
| Цена: | 800 ₽ |
| Деталь: | SHEET, HANDSET |
| Парткод: | FL1-0525-000 |
| Цена: | 800 ₽ |
| Деталь: | SHEET, BLANKING |
| Парткод: | FL1-1416-000 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FM1-P235-000 |
| Цена: | 51 100 ₽ |
| Деталь: | COVER ASSEMBLY, RIGHT |
| Парткод: | FM1-P402-000 |
| Деталь: | COVER ASSEMBLY, LEFT |
| Парткод: | FM1-P403-000 |
| Деталь: | DUPLEXING DOOR ASSY |
| Парткод: | FM1-P404-000 |
| Цена: | 6 900 ₽ |
| Деталь: | FRONT DOOR ASSY |
| Парткод: | FM1-X312-000 |
| Деталь: | COVER ASSEMBLY, TOP |
| Парткод: | FM1-P408-000 |
| Деталь: | UPPER COVER ASSEMBLY, FRONT |
| Парткод: | FM1-P409-000 |
| Деталь: | COVER, CASSETTE |
| Парткод: | FE8-3007-000 |
| Цена: | 1 800 ₽ |
| Деталь: | BUTTON, DOOR, FRONT |
| Парткод: | FE8-3016-000 |
| Цена: | 380 ₽ |
| Деталь: | HINGE ASSEMBLY |
| Парткод: | FM1-P442-000 |
| Цена: | 2 600 ₽ |
| Деталь: | LABEL, MP SIZE |
| Парткод: | FU2-1954-000 |
| Цена: | 330 ₽ |
| Деталь: | LABEL, MP PROHIBITION |
| Парткод: | FU2-1956-000 |
| Цена: | 260 ₽ |
| Деталь: | LABEL, NETWORK |
| Парткод: | FU2-1959-000 |
| Цена: | 270 ₽ |
| Деталь: | LABEL, DUPLEXING JAM |
| Парткод: | FU2-1962-010 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | LABEL, MODULAR |
| Парткод: | FU2-1961-000 |
| Деталь: | LABEL, DOCUMENT SIZE |
| Парткод: | FE8-4191-000 |
| Деталь: | SHEET, WHITE |
| Парткод: | FE8-3469-000 |
| Деталь: | COVER, REAR |
| Парткод: | FE8-3474-000 |
| Деталь: | COVER, FRONT |
| Парткод: | FE8-3475-000 |
| Деталь: | RING, E |
| Парткод: | FE8-3636-000 |
| Деталь: | BUSHING |
| Парткод: | FE8-3643-000 |
| Деталь: | SPRING, LEAF |
| Парткод: | FE8-3644-000 |
| Деталь: | PANEL, OPEN/CLOSE |
| Парткод: | FL1-2517-000 |
| Деталь: | SEPARATION ROLLER ASSEMBLY |
| Парткод: | FM1-N703-000 |
| Деталь: | ROLLER, PICK-UP |
| Парткод: | FC8-9251-000 |
| Цена: | 440 ₽ |
| Деталь: | ROLLER, SEPARATION |
| Парткод: | FL3-1023-000 |
| Цена: | 600 ₽ |
| Деталь: | GEAR, 23T |
| Парткод: | FU2-1865-000 |
| Деталь: | BUSHING |
| Парткод: | FU2-1902-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1903-000 |
| Деталь: | GUIDE, CABLE |
| Парткод: | FE8-3462-000 |
| Деталь: | HINGE |
| Парткод: | FM1-T687-000 |
| Деталь: | COVER, LOWER |
| Парткод: | FE8-3467-000 |
| Деталь: | CAP |
| Парткод: | FE8-4189-000 |
| Деталь: | PAPER FEED GUIDE ASSEMBLY |
| Парткод: | FM1-P584-000 |
| Деталь: | DOCUMENT TRAY ASSEMBLY |
| Парткод: | FM1-N711 -000 |
| Деталь: | SCREW,TP M3X8 |
| Парткод: | XA9-0476-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | GUIDE ASSEMBLY, UPPER |
| Парткод: | FM1-N704-000 |
| Деталь: | ROLLER |
| Парткод: | FE8-3440-000 |
| Деталь: | FLAG,SENSOR |
| Парткод: | FE8-3444-000 |
| Деталь: | STOPPER, DOCUMENT |
| Парткод: | FE8-3645-000 |
| Деталь: | GUIDE, UPPER |
| Парткод: | FL1-2518-000 |
| Деталь: | SEPARATION PAD ASSEMBLY |
| Парткод: | FM1-P580-000 |
| Деталь: | SHAFT, TRANSMISSION |
| Парткод: | FU2-1875-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FU2-1904-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1905-000 |
| Деталь: | ROLLER, AUXILIARY |
| Парткод: | FU2-1906-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1922-000 |
| Деталь: | SCREW,TP M3X8 |
| Парткод: | XA9-0476-000 |
| Деталь: | PAPER FEEDER ASSEMBLY SET |
| Парткод: | FM1-W051-000 |
| Деталь: | GUIDE, PAPER DELIVERY |
| Парткод: | FE8-3446-000 |
| Деталь: | FLAG,SENSOR |
| Парткод: | FE8-3448-000 |
| Деталь: | BUSHING |
| Парткод: | FE8-3458-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FE8-3459-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FE8-3460-000 |
| Деталь: | RING, E |
| Парткод: | FE8-3636-000 |
| Деталь: | STOPPER, RATCHET SPRING |
| Парткод: | FE8-3655-000 |
| Деталь: | RATCHET, PAPER FEED ROLLER |
| Парткод: | FE8-3656-000 |
| Деталь: | LEVER, RELEASE |
| Парткод: | FE8-3657-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FL1-1367-000 |
| Деталь: | SHEET, GUIDE |
| Парткод: | FL1-1369-000 |
| Деталь: | ROLLER, PAPER DELIVERY |
| Парткод: | FM1-N407-000 |
| Деталь: | MOTOR DRIVE ASSY |
| Парткод: | FM1-N709-010 |
| Деталь: | CABLE, SIGNAL, DF, 2 |
| Парткод: | FM2-C963-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7207-006 |
| Деталь: | CABLE, SENSOR |
| Парткод: | FM1-X903-000 |
| Деталь: | CABLE, GROUNDING |
| Парткод: | FM1-X908-000 |
| Деталь: | GEAR, 67T |
| Парткод: | FU2-1867-000 |
| Деталь: | GEAR, 25T |
| Парткод: | FU2-1869-000 |
| Деталь: | GEAR, 38T |
| Парткод: | FU2-1870-000 |
| Деталь: | BUSHING |
| Парткод: | FU2-1902-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FU2-1907-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1908-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5935-000 |
| Деталь: | SCREW, W/WASHER P, M3X10 |
| Парткод: | XA9-2049-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FK4-5060-000 |
| Деталь: | HOLDER, CONTACT IMAGE SENSOR |
| Парткод: | FE8-3450-000 |
| Деталь: | GLASS HOLDER UNIT |
| Парткод: | FL1-2502-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1924-000 |
| Деталь: | CONTACT IMAGE SENSOR SET |
| Парткод: | FM1-T027-000 |
| Деталь: | SHEET, WHITE |
| Парткод: | FL1-4365-000 |
| Деталь: | Узел переноса изображения, в сборе |
| Парткод: | RM2-6454-000CN |
| Цена: | 21 300 ₽ |
| Деталь: | Вал вторичного переноса заряда |
| Парткод: | RM2-6455-000CN |
| Цена: | 2 000 ₽ |
| Деталь: | COVER, FRONT, LEFT |
| Парткод: | FE8-2996-000 |
| Деталь: | COVER, FRONT, RIGHT |
| Парткод: | FE8-2997-000 |
| Деталь: | COVER, REAR, UPPER |
| Парткод: | FE8-2998-000 |
| Деталь: | COVER, ARM, LEFT |
| Парткод: | FE8-3066-000 |
| Деталь: | COVER, ARM, RIGHT |
| Парткод: | FE8-3067-000 |
| Деталь: | COVER, ARM, CENTER |
| Парткод: | FE8-3068-000 |
| Деталь: | COVER, PANEL, REAR UPPER |
| Парткод: | FE8-3069-000 |
| Цена: | 470 ₽ |
| Деталь: | COVER, PANEL, REAR UNDER |
| Парткод: | FE8-3070-000 |
| Цена: | 700 ₽ |
| Деталь: | COVER, PANEL, LOWER |
| Парткод: | FE8-3071-000 |
| Цена: | 650 ₽ |
| Деталь: | COVER, PANEL, REAR |
| Парткод: | FE8-3262-000 |
| Деталь: | SHEET, HANDSET |
| Парткод: | FL1-0525-000 |
| Цена: | 800 ₽ |
| Деталь: | SHEET, BLANKING |
| Парткод: | FL1-1416-000 |
| Деталь: | CONTROL PANEL ASSEMBLY |
| Парткод: | FM1-T717-000 |
| Деталь: | COVER ASSEMBLY, RIGHT |
| Парткод: | FM1-P402-000 |
| Деталь: | COVER ASSEMBLY, LEFT |
| Парткод: | FM1-P403-000 |
| Деталь: | DUPLEXING DOOR ASSY |
| Парткод: | FM1-P404-000 |
| Цена: | 6 900 ₽ |
| Деталь: | FRONT DOOR ASSY |
| Парткод: | FM1-X312-000 |
| Деталь: | COVER ASSEMBLY, TOP |
| Парткод: | FM1-P408-000 |
| Деталь: | UPPER COVER ASSEMBLY, FRONT |
| Парткод: | FM1-P409-000 |
| Деталь: | COVER, CASSETTE |
| Парткод: | FE8-3007-000 |
| Цена: | 1 800 ₽ |
| Деталь: | BUTTON, DOOR, FRONT |
| Парткод: | FE8-3016-000 |
| Цена: | 380 ₽ |
| Деталь: | HINGE ASSEMBLY |
| Парткод: | FM1-P442-000 |
| Цена: | 2 600 ₽ |
| Деталь: | LABEL, MP SIZE |
| Парткод: | FU2-1954-000 |
| Цена: | 330 ₽ |
| Деталь: | LABEL, MP PROHIBITION |
| Парткод: | FU2-1956-000 |
| Цена: | 260 ₽ |
| Деталь: | LABEL, NETWORK |
| Парткод: | FU2-1959-000 |
| Цена: | 270 ₽ |
| Деталь: | LABEL, DUPLEXING JAM |
| Парткод: | FU2-1962-010 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | LID, MODULAR |
| Парткод: | FE8-3017-000 |
| Цена: | 340 ₽ |
| Деталь: | SPRING, GROUNDING |
| Парткод: | FE8-3076-000 |
| Цена: | 500 ₽ |
| Деталь: | MODULE, WLAN |
| Парткод: | FK4-4651-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FL0-8219-000 |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FL0-8149-000 |
| Цена: | 700 ₽ |
| Деталь: | POWER SWITCH ASSY |
| Парткод: | FM1-P414-000 |
| Цена: | 1 900 ₽ |
| Деталь: | FAN |
| Парткод: | FK4-4315-000 |
| Цена: | 3 200 ₽ |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FM2-D942-000 |
| Цена: | 750 ₽ |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FM2-D943-000 |
| Цена: | 800 ₽ |
| Деталь: | MEMORY PCB ASSY |
| Парткод: | RM3-7245-000 |
| Деталь: | FRONT DOOR SWITCH CABLE ASSY |
| Парткод: | RM3-7227-000 |
| Деталь: | CASSETTE SWITCH CABLE ASSY |
| Парткод: | RM2-7896-000 |
| Цена: | 600 ₽ |
| Деталь: | CONNECTOR, SNAP TIGHT, BK |
| Парткод: | VS1-7207-003 |
| Деталь: | CONNECTOR,DRAWER |
| Парткод: | VS1-7258-007 |
| Цена: | 360 ₽ |
| Деталь: | MAIN CONTROLLER PCB ASSY SET |
| Парткод: | FM1-W048-000 |
| Деталь: | ENGINE CONTROLLER PCB ASSY |
| Парткод: | FM2-H953-000 |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | RM2-5612-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | CORE, FERRITE |
| Парткод: | FK2-8767-000 |
| Деталь: | FERRITE CORE UNIT |
| Парткод: | FM1-T672-000 |
| Цена: | 450 ₽ |
| Деталь: | MICROSWITCH |
| Парткод: | RK2-0534-000 |
| Деталь: | SPEAKER |
| Парткод: | FK3-3944-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FL0-8150-000 |
| Деталь: | OFFHOOK PCB ASSEMBLY |
| Парткод: | FM1-R867-000 |
| Деталь: | NCU PCB ASSEMBLY |
| Парткод: | FM1-X947-000 |
| Деталь: | CABLE, OFF HOOK |
| Парткод: | FM1-X955-000 |
| Деталь: | CABLE, PSEUDO CI |
| Парткод: | FM2-G945-000 |
| Деталь: | COPYBOARD GLASS UNIT |
| Парткод: | FM1-W187-000 |
| Деталь: | SPACER, CIS |
| Парткод: | FE8-3479-000 |
| Деталь: | BELT, TIMING |
| Парткод: | FE8-3582-000 |
| Деталь: | CONTACT IMAGE SENSOR,FA106H-01 |
| Парткод: | FK4-4050-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FK4-5059-000 |
| Деталь: | PULLEY UNIT |
| Парткод: | FL1-1412-000 |
| Деталь: | DC MOTOR ASSEMBLY |
| Парткод: | FM1-V349-000 |
| Деталь: | CABLE, READER SIGNAL, 2 |
| Парткод: | FM2-C964-000 |
| Деталь: | CONNECTOR, SNAP TIGHT, BK |
| Парткод: | VS1-7177-004 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5935-000 |
| Деталь: | LABEL, WIDTH SIZE |
| Парткод: | FE8-4192-000 |
| Деталь: | SCREW,TP M3X8 |
| Парткод: | XA9-0476-000 |
| Деталь: | LABEL, COPY PROHIBITION |
| Парткод: | FE8-4198-000 |
| Деталь: | LABEL, GLASS CLEANING |
| Парткод: | FE8-4194-000 |
| Деталь: | FIXING ASSY (220-240V) |
| Парткод: | RM2-6418-000 |
| Деталь: | LABEL, HIGH TMP. CAUTION |
| Парткод: | FU2-1963-000 |
| Цена: | 270 ₽ |
| Деталь: | PAPER RE-PICK UP ASSY |
| Парткод: | RM2-6387-000 |
| Деталь: | REVERSE DRIVE ASSY |
| Парткод: | RM2-6389-000 |
| Деталь: | SECONDARY TRANSFER ASSY |
| Парткод: | RM2-6397-000 |
| Деталь: | 2ND TRANSFER ROLLER ASSY |
| Парткод: | RM2-6455-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | RM2-8661 -000 |
| Деталь: | FAN |
| Парткод: | FK4-4315-000 |
| Цена: | 3 200 ₽ |
| Деталь: | DRIVER PCB ASSY |
| Парткод: | RM2-7369-000 |
| Деталь: | SCREW, W/WASHER, M3X8 |
| Парткод: | XA9-1420-000 |
| Цена: | 1 100 ₽ |
| Деталь: | PLATE, USB, GROUNDING |
| Парткод: | FE8-0014-000 |
| Цена: | 950 ₽ |
| Деталь: | USB RELAY PCB ASSEMBLY |
| Парткод: | FM1-R870-000 |
| Цена: | 3 400 ₽ |
| Деталь: | FIXING POWER SUPPLY PCB ASSY |
| Парткод: | FM1-V604-000 |
| Деталь: | L.V. POWER SUPPLY PCB ASSY |
| Парткод: | FM1-Z821-010 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | CABLE, MADRID HDMI |
| Парткод: | FK4-4092-000 |
| Цена: | 5 700 ₽ |
| Деталь: | Прижимной вал |
| Парткод: | CET211001 |
| Цена: | 1 700 ₽ |
| Деталь: | Термоплёнка |
| Парткод: | RM2-6436-FILM-GB |
| Цена: | 1 000 ₽ |
| Деталь: | Термоплёнка |
| Парткод: | RM2-6436-FILM-OB |
| Цена: | 650 ₽ |
| Деталь: | Печь, в сборе |
| Парткод: | RM2-6461-000CN |
| Цена: | 25 400 ₽ |
| Деталь: | ROLLER, PAPER PICK-UP |
| Парткод: | RL1 -2593-000 |
| Деталь: | CASSETTE ASSY |
| Парткод: | RM2-6377-000 |
| Деталь: | SEPARATION PAD ASSY |
| Парткод: | RM2-6406-000 |
| Деталь: | INTERMEDIATE TRANS. BELT ASSY |
| Парткод: | RM2-6454-000 |
| Цена: | 12 000 ₽ |
| Деталь: | DRUM MOTOR ASSY |
| Парткод: | RM2-7342-000 |
| Деталь: | DEVELOPING MOTOR ASSY |
| Парткод: | RM2-7344-000 |
| Деталь: | FIXING MOTOR ASSY |
| Парткод: | RM2-7349-000 |
| Деталь: | ENVIRONMENT SENSOR PCB ASSY |
| Парткод: | RM3-7236-000 |
| Деталь: | DENSITY DETECT SENSOR ASSY |
| Парткод: | RM2-7399-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5935-000 |
| Деталь: | LABEL, CASSETTE OPERATOR |
| Парткод: | FU2-1958-000 |
| Цена: | 310 ₽ |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | FIXING ASSY (220-240V) |
| Парткод: | RM2-6435-000 |
| Деталь: | LABEL, HIGH TMP. CAUTION |
| Парткод: | FU2-1963-000 |
| Цена: | 270 ₽ |
| Деталь: | PAPER RE-PICK UP ASSY |
| Парткод: | RM2-6387-000 |
| Деталь: | REVERSE DRIVE ASSY |
| Парткод: | RM2-6389-000 |
| Деталь: | SECONDARY TRANSFER ASSY |
| Парткод: | RM2-6397-000 |
| Деталь: | 2ND TRANSFER ROLLER ASSY |
| Парткод: | RM2-6455-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | GUIDE ASSEMBLY, UPPER |
| Парткод: | FM1-N704-000 |
| Деталь: | ROLLER |
| Парткод: | FE8-3440-000 |
| Деталь: | FLAG,SENSOR |
| Парткод: | FE8-3444-000 |
| Деталь: | STOPPER, DOCUMENT |
| Парткод: | FE8-3645-000 |
| Деталь: | GUIDE, UPPER |
| Парткод: | FL1-2518-000 |
| Деталь: | SEPARATION PAD ASSEMBLY |
| Парткод: | FM1-P580-000 |
| Деталь: | SHAFT, TRANSMISSION |
| Парткод: | FU2-1875-000 |
| Деталь: | SPRING, TORSION |
| Парткод: | FU2-1904-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1905-000 |
| Деталь: | ROLLER, AUXILIARY |
| Парткод: | FU2-1906-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1922-000 |
| Деталь: | SCREW,TP M3X8 |
| Парткод: | XA9-0476-000 |
| Деталь: | PAPER FEEDER ASSEMBLY |
| Парткод: | FM1-V352-000 |
| Деталь: | GUIDE, PAPER DELIVERY |
| Парткод: | FE8-3446-000 |
| Деталь: | FLAG,SENSOR |
| Парткод: | FE8-3448-000 |
| Деталь: | BUSHING |
| Парткод: | FE8-3458-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FE8-3459-000 |
| Деталь: | PLATE, GROUNDING |
| Парткод: | FE8-3460-000 |
| Деталь: | RING, E |
| Парткод: | FE8-3636-000 |
| Деталь: | STOPPER, RATCHET SPRING |
| Парткод: | FE8-3655-000 |
| Деталь: | RATCHET, PAPER FEED ROLLER |
| Парткод: | FE8-3656-000 |
| Деталь: | LEVER, RELEASE |
| Парткод: | FE8-3657-000 |
| Деталь: | ROLLER, PAPER FEED |
| Парткод: | FL1-1367-000 |
| Деталь: | SHEET, GUIDE |
| Парткод: | FL1-1369-000 |
| Деталь: | ROLLER, PAPER DELIVERY |
| Парткод: | FM1-N407-000 |
| Деталь: | MOTOR DRIVE ASSY |
| Парткод: | FM1-N709-010 |
| Деталь: | CABLE, SIGNAL, DF, 2 |
| Парткод: | FM2-C963-000 |
| Деталь: | CONNECTOR, SNAP TIGHT |
| Парткод: | VS1-7207-006 |
| Деталь: | CABLE, SENSOR |
| Парткод: | FM1-X903-000 |
| Деталь: | CABLE, GROUNDING |
| Парткод: | FM1-X908-000 |
| Деталь: | GEAR, 67T |
| Парткод: | FU2-1867-000 |
| Деталь: | GEAR, 25T |
| Парткод: | FU2-1869-000 |
| Деталь: | GEAR, 38T |
| Парткод: | FU2-1870-000 |
| Деталь: | BUSHING |
| Парткод: | FU2-1902-000 |
| Деталь: | SPRING, TENSION |
| Парткод: | FU2-1907-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1908-000 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5935-000 |
| Деталь: | SCREW, W/WASHER P, M3X10 |
| Парткод: | XA9-2049-000 |
| Деталь: | HOLDER UNIT |
| Парткод: | FM1-N708-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | FU2-1923-000 |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | RM2-8661 -000 |
| Деталь: | FAN |
| Парткод: | FK4-4315-000 |
| Цена: | 3 200 ₽ |
| Деталь: | DRIVER PCB ASSY |
| Парткод: | RM2-7369-000 |
| Деталь: | SCREW, W/WASHER, M3X8 |
| Парткод: | XA9-1420-000 |
| Цена: | 1 100 ₽ |
| Деталь: | PLATE, USB, GROUNDING |
| Парткод: | FE8-0014-000 |
| Цена: | 950 ₽ |
| Деталь: | USB RELAY PCB ASSEMBLY |
| Парткод: | FM1-R870-000 |
| Цена: | 3 400 ₽ |
| Деталь: | FIXING POWER SUPPLY PCB ASSY |
| Парткод: | FM1-V605-000 |
| Деталь: | L.V. POWER SUPPLY PCB ASSY |
| Парткод: | FM1-Z822-000 |
| Цена: | 20 600 ₽ |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | CABLE, MADRID HDMI |
| Парткод: | FK4-4092-000 |
| Цена: | 5 700 ₽ |
| Деталь: | SPRING, GROUNDING |
| Парткод: | FE8-3076-000 |
| Цена: | 500 ₽ |
| Деталь: | MODULE, WLAN |
| Парткод: | FK4-4651-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FL0-8219-000 |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FL0-8149-000 |
| Цена: | 700 ₽ |
| Деталь: | POWER SWITCH ASSY |
| Парткод: | FM1-P414-000 |
| Цена: | 1 900 ₽ |
| Деталь: | FAN |
| Парткод: | FK4-4315-000 |
| Цена: | 3 200 ₽ |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FM2-D942-000 |
| Цена: | 750 ₽ |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FM2-D943-000 |
| Цена: | 800 ₽ |
| Деталь: | MEMORY PCB ASSY |
| Парткод: | RM3-7245-000 |
| Деталь: | FRONT DOOR SWITCH CABLE ASSY |
| Парткод: | RM3-7227-000 |
| Деталь: | CASSETTE SWITCH CABLE ASSY |
| Парткод: | RM2-7896-000 |
| Цена: | 600 ₽ |
| Деталь: | CONNECTOR, SNAP TIGHT, BK |
| Парткод: | VS1-7207-003 |
| Деталь: | CONNECTOR,DRAWER |
| Парткод: | VS1-7258-007 |
| Цена: | 360 ₽ |
| Деталь: | MAIN CONTROLLER PCB ASSY SET |
| Парткод: | FM1-W050-000 |
| Деталь: | ENGINE CONTROLLER PCB ASSY |
| Парткод: | FM2-H953-000 |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | RM2-5612-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | CORE, FERRITE |
| Парткод: | FK2-8767-000 |
| Деталь: | FERRITE CORE UNIT |
| Парткод: | FM1-T672-000 |
| Цена: | 450 ₽ |
| Деталь: | MICROSWITCH |
| Парткод: | RK2-0534-000 |
| Деталь: | SPEAKER |
| Парткод: | FK3-3944-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FL0-8150-000 |
| Деталь: | OFFHOOK PCB ASSEMBLY |
| Парткод: | FM1-R867-000 |
| Деталь: | NCU PCB ASSEMBLY |
| Парткод: | FM1-X947-000 |
| Деталь: | CABLE, OFF HOOK |
| Парткод: | FM1-X955-000 |
| Деталь: | CABLE, PSEUDO CI |
| Парткод: | FM2-G945-000 |
| Деталь: | COPYBOARD GLASS UNIT |
| Парткод: | FM1-U354-000 |
| Деталь: | SPACER, CIS |
| Парткод: | FE8-3479-000 |
| Деталь: | BELT, TIMING |
| Парткод: | FE8-3582-000 |
| Деталь: | CONTACT IMAGE SENSOR,FA106H-01 |
| Парткод: | FK4-4050-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FK4-5059-000 |
| Деталь: | PULLEY UNIT |
| Парткод: | FL1-1412-000 |
| Деталь: | DC MOTOR ASSEMBLY |
| Парткод: | FM1-V349-000 |
| Деталь: | CABLE, READER SIGNAL, 2 |
| Парткод: | FM2-C964-000 |
| Деталь: | CONNECTOR, SNAP TIGHT, BK |
| Парткод: | VS1-7177-004 |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5935-000 |
| Деталь: | LABEL, WIDTH SIZE |
| Парткод: | FE8-4192-000 |
| Деталь: | SCREW,TP M3X8 |
| Парткод: | XA9-0476-000 |
| Деталь: | LABEL, COPY PROHIBITION |
| Парткод: | FE8-4198-000 |
| Деталь: | LABEL, GLASS CLEANING |
| Парткод: | FE8-4194-000 |
| Деталь: | LABEL, GLASS CLEANING |
| Парткод: | FE8-4196-000 |
| Деталь: | Ролик захвата бумаги из лотка подачи |
| Парткод: | RL1-2593-000CN |
| Цена: | 450 ₽ |
| Деталь: | Pickup Roller |
| Парткод: | RM2-5576-000CN |
| Цена: | 290 ₽ |
| Деталь: | Ролик подачи бумаги из кассеты |
| Парткод: | RM2-5577-000CN |
| Цена: | 290 ₽ |
| Деталь: | Ролик отделения бумаги из кассеты |
| Парткод: | RM2-5881-000CN |
| Цена: | 600 ₽ |
| Деталь: | Узел подъёма в кассете, в сборе |
| Парткод: | RM2-6370-000CN |
| Цена: | 2 400 ₽ |
| Деталь: | Узел захвата бумаги из кассеты, в сборе |
| Парткод: | RM2-6372-000CN |
| Цена: | 7 400 ₽ |
| Деталь: | Узел регистрации, в сборе |
| Парткод: | RM2-6374-000CN |
| Цена: | 9 300 ₽ |
| Деталь: | GEAR Z33S CONT D |
| Парткод: | RM2-6377-000CN |
| Цена: | 5 900 ₽ |
| Деталь: | Площадка отделения бумаги в лотке ручной подачи |
| Парткод: | RM2-6406-000CN |
| Цена: | 500 ₽ |
| Деталь: | Направляющая подачи бумаги, в сборе |
| Парткод: | RM2-6366-000CN |
| Цена: | 1 800 ₽ |
| Деталь: | Направляющая подачи бумаги, в сборе |
| Парткод: | RM2-6368-000CN |
| Цена: | 2 100 ₽ |
| Деталь: | Привод узла двухсторонней печати, в сборе |
| Парткод: | RM2-6389-000CN |
| Цена: | 900 ₽ |
| Деталь: | Направляющая подачи бумаги |
| Парткод: | RM2-6397-000CN |
| Деталь: | SPRING, GROUNDING |
| Парткод: | FE8-3076-000 |
| Цена: | 500 ₽ |
| Деталь: | MODULE, WLAN |
| Парткод: | FK4-4651-000 |
| Деталь: | CABLE, FLAT |
| Парткод: | FL0-8219-000 |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FL0-8149-000 |
| Цена: | 700 ₽ |
| Деталь: | POWER SWITCH ASSY |
| Парткод: | FM1-P414-000 |
| Цена: | 1 900 ₽ |
| Деталь: | FAN |
| Парткод: | FK4-4315-000 |
| Цена: | 3 200 ₽ |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FM2-D942-000 |
| Цена: | 750 ₽ |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | FM2-D943-000 |
| Цена: | 800 ₽ |
| Деталь: | MEMORY PCB ASSY |
| Парткод: | RM3-7245-000 |
| Деталь: | FRONT DOOR SWITCH CABLE ASSY |
| Парткод: | RM3-7227-000 |
| Деталь: | CASSETTE SWITCH CABLE ASSY |
| Парткод: | RM2-7896-000 |
| Цена: | 600 ₽ |
| Деталь: | CONNECTOR, SNAP TIGHT, BK |
| Парткод: | VS1-7207-003 |
| Деталь: | CONNECTOR,DRAWER |
| Парткод: | VS1-7258-007 |
| Цена: | 360 ₽ |
| Деталь: | MAIN CONTROLLER PCB ASSY |
| Парткод: | FM2-H951 -000 |
| Деталь: | ENGINE CONTROLLER PCB ASSY |
| Парткод: | FM2-H953-000 |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | RM2-5612-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
| Деталь: | CORE, FERRITE |
| Парткод: | FK2-8767-000 |
| Деталь: | FERRITE CORE UNIT |
| Парткод: | FM1-T672-000 |
| Цена: | 450 ₽ |
| Деталь: | MICROSWITCH |
| Парткод: | RK2-0534-000 |
| Деталь: | PAPER PICK-UP ROLLER ASSY |
| Парткод: | RM2-5576-000 |
| Деталь: | FEED ROLLER ASSY |
| Парткод: | RM2-5577-000 |
| Деталь: | SEPARATION ROLLER ASSY |
| Парткод: | RM2-5881-000 |
| Деталь: | FEED GUIDE ASSY, REAR |
| Парткод: | RM2-6366-000 |
| Деталь: | FEED GUIDE ASSY, FRONT |
| Парткод: | RM2-6368-000 |
| Деталь: | LIFTER DRIVE ASSY |
| Парткод: | RM2-6370-000 |
| Деталь: | PAPER PICK-UP ASSY |
| Парткод: | RM2-6372-000 |
| Деталь: | REGISTRATION ASSY |
| Парткод: | RM2-6374-000 |
| Деталь: | CARTRIDGE TRAY ASSY |
| Парткод: | RM2-1807-000 |
| Деталь: | PICK-UP MOTOR ASSY |
| Парткод: | RM2-7350-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, D, M3X6 |
| Парткод: | XA9-1835-000 |
Коды ошибок
0001
0002
0071
0094
0901
0902
0903
0907
0908
0909
090C
090D
0A01
0A03
0A07
0A08
0A09
0A0C
0A0D
10-0100
10-0401
10-0402
10-0403
10-0404
1101
1103
1107
1108
1109
110C
110D
1901
1903
1907
1908
1909
190C
190D
2101
2103
2107
2108
2109
210C
210D
2901
2903
2907
2908
2909
290C
290D
3101
3103
3107
3108
3109
310A
310D
3901
3903
3907
3908
3909
390C
390D
4101
4103
4107
4108
4109
410C
410D
4901
4903
4907
4908
4909
490C
490D
5901
5903
5907
5908
5909
590C
590D
590E
6101
6103
6107
6108
6109
610C
610D
6201
6203
6207
6208
6209
620C
620D
7101
7102
7103
7107
7108
7109
710C
710D
710E
7201
7202
7203
7207
7208
7209
720C
720D
720E
7901
7902
7903
7907
7908
7909
790C
790D
790E
E000-0000
E001-0000
E001-0001
E003-0000
E003-0001
E004-0000
E012-0000
E012-0001
E014-0000
E014-0001
E015-0000
E015-0001
E015-0002
E020-0000
E021-1000
E021-1001
E021-1002
E021-1003
E021-2000
E021-2001
E021-2002
E021-2003
E052-0000
E066-0000
E078-0000
E100-0000
E100-0001
E100-0002
E100-0003
E110-0000
E194-0000
E196-0000
E196-1000
E196-2000
E196-3000
E196-3001
E198-0000
E202-0001
E202-0002
E225-0001
E246-0000
E247-0000
E248-0001
E350-0000 ... E355-0005
E719-0000
E732-0000
E733-0000
E736-0000
E736-0001
E743-0000
E744-0001
E744-0002
E744-1001
E744-4000
E744-5000
E744-6000
E744-7000
E746-0000
E766-8000
E766-9000
E805-0005
E806-0000
E808-0000
E840-0000
Описание
| Error code: | 0001 |
| Display: | Main motor failure CODE (001) Turn power off, on |
| Description: | Main Motor Failure The Main Motor lock signal remains HIGH for a predetermined consecutive period of time while the Main Motor remains energized. |
| Causes: | • Main Motor, PL9.1.6 • Engine Control Board, PL13.0.20 • Power Supply, PL13.0.17 |
| Remedy: | 1 Check the Engine Control Board connector P/J8. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Check the Main Motor for proper positioning. Is the motor engaged with the gears? Go to step 3. Reseat the motor drive properly. If the problem persists, go to step 3. 3 Check the operation of the Main Motor. Is the motor faulty? Replace the motor. If the problem persists, go to step 4. Go to step 4. 4 On the Engine Control Board, check P/J2 at pins 1, 5, and 7 for +24V. Are the voltages present? Go to step 5. Go to step 6. 5 Replace the Engine Control Board. Does the problem persist? Go to step 5. Complete. 6 Replace the Power Supply. Complete. |
| Error code: | 0002 |
| Description: | Disorder of communication with Sub CPU This occurs when the Sub CPU is not detected after turning on the machine |
| Causes: | Servo Board does not work correctly. Sub CPU does not work correctly. There is a bad connection between Main Board and Servo Board. |
| Remedy: | Check cable connection between Main Board and Servo Board. Check cable connection between Main Board and Heater Board. Check the other cable connections of Servo Board Heater Board replacement Servo Board replacement Main Board replacement Flexible cable replacement |
| Error code: | 0071 |
| Description: | Sequence Error |
| Error code: | 0094 |
| Display: | Trans. roll failure CODE (0094) Turn power off, on |
| Description: | Transfer Roll Failure Possible causes: • The 2nd Image Transfer Retraction Position Sensor(PS3) is not activated (retracted position) within a given period of time after the retraction sequence of the 2nd transfer roller has been started. • The 2nd Image Transfer Retraction Position Sensor is not deactivated (pressed position) within a given period of time after the pressure sequence of the 2nd transfer roller has been started. |
| Causes: | • 2nd Image Transfer Retraction Position Sensor (PS3), PL4.0.9 • 2nd Image Transfer Retraction Position Solenoid (SD4), PL7.2.23 • Main Motor, PL9.1.6 • Engine Control Board, PL13.0.20 |
| Remedy: | 1 Check the Main Motor connector CN37. Is the connector seated properly? Go to step 2. Reseat the connector. If the problem persists, go to step 2. 2 Check the Main Motor for proper drive coupling and correct as necessary. Does the problem persist? Go to step 3. Complete. 3 Check the 2nd Image Transfer Retraction Position Solenoid connector CN5. Is the connector seated properly? Go to step 4. Reseat the connector. If the problem persists, go to step 4. 4 Check the 2nd Image Transfer Retraction Position Solenoid for proper drive coupling and correct as necessary. Does the problem persist? Go to step 5. Complete. 5 Check the 2nd Image Transfer Retraction Position Sensor control signal for a voltage change at P/J12-3 on the Engine Control Board. Is the signal operating correctly? Go to step 6. Replace the Engine Control Board. If the problem persists, go to step 6. 6 Replace the 2nd Image Transfer Retraction Position Solenoid. Does the problem persist? Go to step 7. Complete. 7 Replace the 2nd Image Transfer Retraction Position Sensor. Complete. |
| Error code: | 0901 |
| Description: | Pickup Delay Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 0902 |
| Description: | Pickup Delay Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Multi-purpose Tray |
| Error code: | 0903 |
| Description: | Pickup Delay Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Cassette Feeding Module |
| Error code: | 0907 |
| Description: | Pickup Delay Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Registration to Drum Area |
| Error code: | 0908 |
| Description: | Pickup Delay Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Drum to Fixing Area |
| Error code: | 0909 |
| Description: | Pickup Delay Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 090C |
| Description: | Pickup Delay Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Reverse Area |
| Error code: | 090D |
| Description: | Pickup Delay Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Feed Area |
| Error code: | 0A01 |
| Display: | Print Unable 0A Turn the power off and then back on again. |
| Description: | Pickup Delay Jam |
| Causes: | Cassette Feed Sensor SR31 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 0A03 |
| Description: | Pickup Delay Jam |
| Causes: | Cassette Feed Sensor SR31 |
| Remedy: | Cassette Feeding Module |
| Error code: | 0A07 |
| Description: | Pickup Delay Jam |
| Causes: | Cassette Feed Sensor SR31 |
| Remedy: | Registration to Drum Area |
| Error code: | 0A08 |
| Description: | Pickup Delay Jam |
| Causes: | Cassette Feed Sensor SR31 |
| Remedy: | Drum to Fixing Area |
| Error code: | 0A09 |
| Description: | Pickup Delay Jam |
| Causes: | Cassette Feed Sensor SR31 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 0A0C |
| Description: | Pickup Delay Jam |
| Causes: | Cassette Feed Sensor SR31 |
| Remedy: | Duplex Reverse Area |
| Error code: | 0A0D |
| Description: | Pickup Delay Jam |
| Causes: | Cassette Feed Sensor SR31 |
| Remedy: | Duplex Feed Area |
| Error code: | 10-0100 |
| Description: | Unidentified Toner Cartridge replacement notification alarm (C) |
| Causes: | Detail Code: 0184 |
| Remedy: | When the replacement with a non-genuine Toner Cartridge was detected. |
| Error code: | 10-0401 |
| Description: | Toner Cartridge empty alarm (Y) |
| Causes: | Alarm to be generated once the Toner Cartridge becomes empty. |
| Error code: | 10-0402 |
| Description: | Toner Cartridge empty alarm (M) |
| Causes: | Alarm to be generated once the Toner Cartridge becomes empty. |
| Error code: | 10-0403 |
| Description: | Toner Cartridge empty alarm (C) |
| Causes: | Alarm to be generated once the Toner Cartridge becomes empty. |
| Error code: | 10-0404 |
| Description: | Toner Cartridge empty alarm (Bk) |
| Causes: | Alarm to be generated once the Toner Cartridge becomes empty. |
| Error code: | 1101 |
| Display: | Replace part soon. |
| Description: | Data transmission did not finish within the specified time. |
| Causes: | An incompatible loop-back connector is connected to the parallel port, or the loop-back connector is not connected. Use the correct loop-back connector (P/#: G0219350) before the test. |
| Remedy: | Load paper. If the problem remains, then check the paper sensor. |
| Error code: | 1103 |
| Description: | Missing Printhead |
| Causes: | Registration Sensor SR1 |
| Remedy: | Install a printhead. |
| Error code: | 1107 |
| Description: | Carriage Interface Error The Carriage Interface is not connect correctly. |
| Causes: | Registration Sensor SR1 |
| Remedy: | • Reconnect the Trailing Cable to the Carriage PCA and the Main PCA. • Make sure that the Trailing Cable is not damaged. • Replace the Carriage PCA. • If the error continues, replace the Main PCA. • If the error continues after replacing the Main PCA and the Carriage PCA, replace the Trailing Cable. |
| Error code: | 1108 |
| Description: | USB Error USB communication is not performed correctly. |
| Causes: | Registration Sensor SR1 |
| Remedy: | • Replace the Main PCA. |
| Error code: | 1109 |
| Description: | EEPROM Error The parameters saved in the EEPROM on the Main PCA cannot be read correctly. |
| Causes: | Registration Sensor SR1 |
| Remedy: | • Replace the EEPROM. • Replace the Main PCA. |
| Error code: | 110C |
| Description: | Pickup Stationary Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Reverse Area |
| Error code: | 110D |
| Description: | Pickup Stationary Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Feed Area |
| Error code: | 1901 |
| Description: | Fixing Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 1903 |
| Description: | An abnormally high temperature of the PLATEN HEATER(64) on the HEATER RELAY BOARD ASSY An abnormally high temperature of the PLATEN HEATER(64) is detected. |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Check whether the THERMISTOR, PLATEN(s) is correctly installed. Replace the HEATER RELAY BOARD ASSY . |
| Error code: | 1907 |
| Description: | An abnormally low temperature of the AFTER HEATER(64) on the HEATER RELAY BOARD ASSY An abnormally low temperature of the AFTER HEATER(64) is detected. |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Check whether the AFTER HEATER(s)(64) is properly connected. Check whether the THERMISTOR, AFTER(s) is correctly installed. Check whether the THERMISTOR, AFTER(s) is properly connected. Check whether the FUSE has blown. If so, replace the FUSE. Replace the HEATER RELAY BOARD ASSY . |
| Error code: | 1908 |
| Description: | An abnormal voltage of the heater on the HEATER CONT BOARD ASSY The voltage of the HEATER CONT BOARD ASSY is abnormally changed.d |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Replace the HEATER CONT BOARD ASSY . Replace the P/S BOARD ASSY . |
| Error code: | 1909 |
| Description: | Serial communication failure between the HEATER CONT BOARD ASSY and SUB-B/C BOARD The serial communication between the HEATER CONT BOARD ASSY and the SUB_B BOARD ASSY/SUB_C BOARD ASSY cannot be made. |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Check whether the serial cable is properly connected. If not, connect it properly. |
| Error code: | 190C |
| Description: | Fixing Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Duplex Reverse Area |
| Error code: | 190D |
| Description: | Fixing Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Duplex Feed Area |
| Error code: | 2101 |
| Description: | Developer motor error After developer motor is driven, the ready signal does not turn to L within 2 s. After developer motor is stabilized, the ready signal is at the H level for 1 s continuously. |
| Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective developer motor. Defective engine PWB. |
| Remedy: | Developer unit 1. Check that the developer waste lock has been released and, if not, release the lock. 2. Check that the gears and spiral screw of the developer unit are not damaged. 3. Confirm that the developer roller can rotate. 4. If it won`t rotate, replace the developer unit. Developer motor 1. To check the motor operation, execute DLP(K) by U030. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer motor and Feed PWB 1 (YC8) Feed PWB 1 (YC2) and Engine PWB (YC5) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Developer motor. Engine PWB. 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 2103 |
| Description: | Developer motor M error After developer motor M is driven, the ready signal does not turn to L within 5 s. After developer motor M is stabilized, the ready signal is at the H level for 5 s continuously. |
| Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective developer motor M. Defective engine PWB. |
| Remedy: | Developer unit M 1. Check that the developer waste lock has been released and, if not, release the lock. 2. Check that the gears and spiral screw of the developer unit are not damaged. 3. Confirm that the developer roller can rotate. 4. If it won`t rotate, replace the developer unit. Developer motor M 1. To check the motor operation, execute DLP(M) by U030. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer motor M and Motor control PWB (YC7) Motor control PWB (YC3) and Engine PWB (YC9) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Developer motor M. Motor control PWB Replace the Motor control PWB Engine PWB. 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 2107 |
| Description: | Fixing Delivery Stationary Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Registration to Drum Area |
| Error code: | 2108 |
| Description: | Fixing Delivery Stationary Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Drum to Fixing Area |
| Error code: | 2109 |
| Description: | Fixing Delivery Stationary Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 210C |
| Description: | Fixing Delivery Stationary Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Reverse Area |
| Error code: | 210D |
| Description: | Fixing Delivery Stationary Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Feed Area |
| Error code: | 2901 |
| Display: | Mail box nearly full. Delete unwanted data. The mail box is nearly full. Delete |
| Description: | Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 2903 |
| Description: | Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Cassette Feeding Module |
| Error code: | 2907 |
| Display: | Mail box full. Delete unwanted data. Maximum jobs stored. Delete unwanted data. |
| Description: | Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Registration to Drum Area |
| Error code: | 2908 |
| Display: | Hard disk error. Press OK to reformat |
| Description: | Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Drum to Fixing Area |
| Error code: | 2909 |
| Display: | File read error. Turn off printer, wait a while, and turn it on again. Invalid files will be deleted. |
| Description: | Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 290C |
| Description: | Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Duplex Reverse Area |
| Error code: | 290D |
| Description: | Delivery Delay Jam |
| Causes: | Fixing Delivery Sensor SR3 |
| Remedy: | Duplex Feed Area |
| Error code: | 3101 |
| Description: | Delivery Stationary Jam |
| Causes: | Delivery Sensor SR4 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 3103 |
| Description: | Delivery Stationary Jam |
| Causes: | Delivery Sensor SR4 |
| Remedy: | Cassette Feeding Module |
| Error code: | 3107 |
| Description: | Delivery Stationary Jam |
| Causes: | Delivery Sensor SR4 |
| Remedy: | Registration to Drum Area |
| Error code: | 3108 |
| Description: | Delivery Stationary Jam |
| Causes: | Delivery Sensor SR4 |
| Remedy: | Drum to Fixing Area |
| Error code: | 3109 |
| Description: | Delivery Stationary Jam |
| Causes: | Delivery Sensor SR4 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 310A |
| Description: | Centre Output Tray Poor Stacking RAP Use this RAP to identify the cause of poor stacking in the centre output tray. |
| Causes: | Delivery Sensor SR4 |
| Remedy: | Perform the steps that follow: • Ensure that all paper or other copy stock being used is within the size and weight specifications. Refer to GP 20 Paper and Media Size Specifications. • Ensure that the edge guides of all paper trays are adjusted correctly for the paper size and that the trays are fully closed. • Ensure that the paper stack in each paper tray has been fanned. • Turn over the paper stack in each paper tray. • Use a new ream of paper, if available. • Check the output copies/prints for curl. Refer to the IQ5 Print Damage RAP. • Check the offset motor, PL 10.11 Item 14. Refer to 310-702-00 Offset Motor Fault RAP. • Check the inverter assembly, PL 10.10 Item 1 for wear or damage. • Check the bail arm assembly, PL 10.11 Item 25 for wear or damage. |
| Error code: | 310D |
| Description: | Delivery Stationary Jam |
| Causes: | Delivery Sensor SR4 |
| Remedy: | Duplex Feed Area |
| Error code: | 3901 |
| Description: | Reverse Delay Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 3903 |
| Description: | Reverse Delay Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Cassette Feeding Module |
| Error code: | 3907 |
| Description: | Reverse Delay Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Registration to Drum Area |
| Error code: | 3908 |
| Description: | Reverse Delay Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Drum to Fixing Area |
| Error code: | 3909 |
| Description: | Reverse Delay Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 390C |
| Description: | Photoreceptor Fan RAP Use this RAP to check the photoreceptor fan. NOTE: A faulty photoreceptor fan can cause image quality problems and xerographic module failure. |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Ensure that the machine is switched on, GP 14. Check the airflow by holding a piece of paper over the fan intake, PL 90.25 Item 7. The fan is working. Y↓N→Go to Flag 1. Check the photoreceptor fan motor. Refer to GP 10, How to Check a Motor. Check the following: • +11V to+15V is available at PJ42 pin 1 (red wire). • 0V is available at PJ42 pin 2 (black wire). • +11V to+15V is available at P/J17 (red wire). • Continuity between PJ42 and P/J17. If necessary repair the harness. Perform the following as necessary. • Install a new photoreceptor fan assembly, PL 90.25 Item 6. • 301L LVPS Checkout RAP. Ensure that the fan is installed correctly. If the fan is installed correctly air will be drawn into the air intake. Refer to the OF6 Ozone and Air Systems RAP. The fault may be intermittent. Go to Flag 1. Check the harness and the connectors, GP 7. |
| Error code: | 390D |
| Description: | Reverse Delay Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Duplex Feed Area |
| Error code: | 4101 |
| Description: | BD initialization error K After Polygon motor is driven, the BD signal is not detected for 1 s. |
| Causes: | Defective connector cable or poor contact in the connector. Defective PD PWB. Defective engine PWB. |
| Remedy: | PD PWB K (LSU) 1. Confirm that the FFC wiring connector is not distorted and connect the FFC wiring all the way in. Laser scanner unit and LSU relay PWB (YC3) LSU relay PWB (YC2) and Engine PWB (YC11) 2. If the FFC wiring is disconnected, replace the FFC wiring. 3. Replace the laser scanner unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 4103 |
| Description: | BD initialization error M After polygon motor M is driven, the BD signal is not detected for 1 s. |
| Causes: | Defective connector cable or poor contact in the connector. Defective PD PWB M. Defective engine PWB. |
| Remedy: | PD PWB M (LSU) 1. Confirm that the FFC wiring connector is not distorted and connect the FFC wiring all the way in. Laser scanner unit and LSU relay PWB (YC8) LSU relay PWB (YC3) and Engine PWB (YC12) 2. If the FFC wiring is disconnected, replace the FFC wiring. 3. Replace the laser scanner unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 4107 |
| Description: | Reverse Stationary Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Registration to Drum Area |
| Error code: | 4108 |
| Description: | Reverse Stationary Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Drum to Fixing Area |
| Error code: | 4109 |
| Description: | Reverse Stationary Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 410C |
| Description: | Reverse Stationary Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Duplex Reverse Area |
| Error code: | 410D |
| Description: | Reverse Stationary Jam |
| Causes: | Duplex Reverse Sensor R21 |
| Remedy: | Duplex Feed Area |
| Error code: | 4901 |
| Description: | FW/OS integrity verification error • NG results from verification of the hash value of the controller FW. • Faulty, damaged, or illegally written ROM data |
| Causes: | • MFP board (MFPB) • SSD board (SSDB) |
| Remedy: | 1 Reboot the machine. - - 2 Update the firmware. - - 3 Check the MFPB for proper connection and correct as necessary. - - 4 Check the SSDB for proper connection and correct as necessary. 5 Replace SSD 6 Replace MFPB |
| Error code: | 4903 |
| Description: | Duplex Feed Delay Jam |
| Causes: | Duplex Re-pickup Sensor SR22 |
| Remedy: | Cassette Feeding Module |
| Error code: | 4907 |
| Description: | Duplex Feed Delay Jam |
| Causes: | Duplex Re-pickup Sensor SR22 |
| Remedy: | Registration to Drum Area |
| Error code: | 4908 |
| Description: | Duplex Feed Delay Jam |
| Causes: | Duplex Re-pickup Sensor SR22 |
| Remedy: | Drum to Fixing Area |
| Error code: | 4909 |
| Description: | Duplex Feed Delay Jam |
| Causes: | Duplex Re-pickup Sensor SR22 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 490C |
| Description: | Duplex Feed Delay Jam |
| Causes: | Duplex Re-pickup Sensor SR22 |
| Remedy: | Duplex Reverse Area |
| Error code: | 490D |
| Description: | Duplex Feed Delay Jam |
| Causes: | Duplex Re-pickup Sensor SR22 |
| Remedy: | Duplex Feed Area |
| Error code: | 5901 |
| Description: | Duplex Re-pickup Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 5903 |
| Description: | Duplex Re-pickup Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Cassette Feeding Module |
| Error code: | 5907 |
| Description: | Duplex Re-pickup Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Registration to Drum Area |
| Error code: | 5908 |
| Description: | Duplex Re-pickup Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Drum to Fixing Area |
| Error code: | 5909 |
| Description: | Duplex Re-pickup Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 590C |
| Description: | Duplex Re-pickup Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Reverse Area |
| Error code: | 590D |
| Description: | Duplex Re-pickup Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Feed Area |
| Error code: | 590E |
| Description: | Duplex Re-pickup Jam |
| Causes: | Registration Sensor SR1 |
| Remedy: | Duplex Pickup Area |
| Error code: | 6101 |
| Display: | No Toner Open the Front Cover, then install Toner Cartridge. Black (BK). |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 6103 |
| Display: | No Toner Open the Front Cover, then install Toner Cartridge. Magenta (M). |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Cassette Feeding Module |
| Error code: | 6107 |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Registration to Drum Area |
| Error code: | 6108 |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Drum to Fixing Area |
| Error code: | 6109 |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 610C |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Duplex Reverse Area |
| Error code: | 610D |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Duplex Feed Area |
| Error code: | 6201 |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Pickup Cassette of the host machine |
| Error code: | 6203 |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Cassette Feeding Module |
| Error code: | 6207 |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Registration to Drum Area |
| Error code: | 6208 |
| Display: | Drum ! Slide the Green tab on Drum Unit. |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Drum to Fixing Area |
| Error code: | 6209 |
| Display: | Drum ! Slide the Green tab on Drum Unit. |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 620C |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Duplex Reverse Area |
| Error code: | 620D |
| Description: | Wrapping Jam |
| Causes: | Fixing Delivery Sensor SR3, Duplex Reverse Sensor SR21 |
| Remedy: | Duplex Feed Area |
| Error code: | 7101 |
| Description: | Toner sensor error Sensor output value of 60 or less or 944 or more continued for 3 s. |
| Causes: | Defective connector cable or poor contact in the connector. Defective toner sensor. Defective engine PWB. |
| Remedy: | Failure of locking the developer waste slot at setup. If an abnormal noise is heard, check that the developer ejection outlet is released and, if not, release the outlet. Toner sensor 1. Check the toner sensor output by U155. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner sensor and Front PWB (YC7) Front PWB (YC2) and Engine PWB (YC8) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Check that the gears of the Developer unit are not damaged and the spiral can rotate. 5. Replace the Developer unit. Toner motor 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 7102 |
| Description: | Toner sensor C error Sensor output value of 60 or less or 944 or more continued for 3 s. |
| Causes: | Defective connector cable or poor contact in the connector. Defective engine PWB. |
| Remedy: | Failure of locking the developer waste slot at setup. If an abnormal noise is heard, check that the developer ejection outlet is released and, if not, release the outlet. Toner sensor C 1. Check the toner sensor output by U155. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner sensor C and Front PWB (YC13) Front PWB (YC2) and Engine PWB (YC10) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Check that the gears of the developer unit C are not damaged and the spiral can rotate. 5. Replace the Developer unit C. Toner motor C 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor C and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor C. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 7103 |
| Description: | Toner sensor M error Sensor output value of 60 or less or 944 or more continued for 3 s. |
| Causes: | Defective connector cable or poor contact in the connector. Defective engine PWB. |
| Remedy: | Failure of locking the developer waste slot at setup. If an abnormal noise is heard, check that the developer ejection outlet is released and, if not, release the outlet. Toner sensor M 1. Check the toner sensor output by U155. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner sensor M and Front PWB (YC11) Front PWB (YC2) and Engine PWB (YC10) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Check that the gears of the developer unit M are not damaged and the spiral can rotate. 5. Replace the Developer unit M. Toner motor M 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor M and and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor M. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 7107 |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Registration to Drum Area |
| Error code: | 7108 |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Drum to Fixing Area |
| Error code: | 7109 |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 710C |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Duplex Reverse Area |
| Error code: | 710D |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Duplex Feed Area |
| Error code: | 710E |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Duplex Pickup Area |
| Error code: | 7201 |
| Description: | Short-circuited inner thermistor (Developer) The sensor input sampling is less than the reference value. (After detection, controlled at 25 °C/77.0 °F) |
| Remedy: | Developer unit K 1. Confirm that the connector of developer unit K is firmly connected, and if necessary, push the unit all the way in. Developer unit K (toner sensor) and Drum relay PWB (YC6) Drum relay PWB (YC1) and Main/Engine PWB (YC15) 2. If the wire is disconnected, short-circuited or has ground fault, or the connector pin is deformed, replace the wire. 3. Replace the developer unit K. Drum relay PWB Replace the drum relay PWB. Main/Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the Main/Engine PWB. |
| Error code: | 7202 |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Multi-purpose Tray |
| Error code: | 7203 |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Cassette Feeding Module |
| Error code: | 7207 |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Registration to Drum Area |
| Error code: | 7208 |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Drum to Fixing Area |
| Error code: | 7209 |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 720C |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Duplex Reverse Area |
| Error code: | 720D |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Duplex Feed Area |
| Error code: | 720E |
| Description: | Internal residual jam |
| Causes: | Registration Sensor Fixing Delivery Sensor Arch Sensor SR1 SR3 SR2 |
| Remedy: | Duplex Pickup Area |
| Error code: | 7901 |
| Description: | Drum EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
| Causes: | Defective connector cable or poor contact in the connector. Defective drum PWB. |
| Remedy: | DR PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DR PWB and Front PWB (YC6) Front PWB (YC2) and Engine PWB (YC8) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum unit. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 7902 |
| Description: | Drum C EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
| Causes: | Defective connector cable or poor contact in the connector. Defective drum PWB C. |
| Remedy: | DR PWB- C 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DR PWB- C and Front PWB (YC12) Front PWB (YC2) and Engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum unit C. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 7903 |
| Description: | Drum M EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
| Causes: | Defective connector cable or poor contact in the connector. Defective drum PWB M. |
| Remedy: | DR PWB- M 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DR PWB- M and Front PWB (YC10) Front PWB (YC2) and Engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum unit M. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 7907 |
| Description: | Door Open Jam |
| Causes: | Registration Sensor Multi-purpose Tray Paper Sensor Fixing Delivery Sensor Delivery Sensor Duplex Re-pickup Sensor SR1 SR6 SR3 SR4 SR22 |
| Remedy: | Registration to Drum Area |
| Error code: | 7908 |
| Description: | Door Open Jam |
| Causes: | Registration Sensor Multi-purpose Tray Paper Sensor Fixing Delivery Sensor Delivery Sensor Duplex Re-pickup Sensor SR1 SR6 SR3 SR4 SR22 |
| Remedy: | Drum to Fixing Area |
| Error code: | 7909 |
| Description: | Door Open Jam |
| Causes: | Registration Sensor Multi-purpose Tray Paper Sensor Fixing Delivery Sensor Delivery Sensor Duplex Re-pickup Sensor SR1 SR6 SR3 SR4 SR22 |
| Remedy: | Fixing to Delivery Area |
| Error code: | 790C |
| Description: | Door Open Jam |
| Causes: | Registration Sensor Multi-purpose Tray Paper Sensor Fixing Delivery Sensor Delivery Sensor Duplex Re-pickup Sensor SR1 SR6 SR3 SR4 SR22 |
| Remedy: | Duplex Reverse Area |
| Error code: | 790D |
| Description: | Door Open Jam |
| Causes: | Registration Sensor Multi-purpose Tray Paper Sensor Fixing Delivery Sensor Delivery Sensor Duplex Re-pickup Sensor SR1 SR6 SR3 SR4 SR22 |
| Remedy: | Duplex Feed Area |
| Error code: | 790E |
| Description: | Door Open Jam |
| Causes: | Registration Sensor Multi-purpose Tray Paper Sensor Fixing Delivery Sensor Delivery Sensor Duplex Re-pickup Sensor SR1 SR6 SR3 SR4 SR22 |
| Remedy: | Duplex Pickup Area |
| Error code: | E000-0000 |
| Description: | Startup error The temperature detected by the main or sub thermistor does not rise to the specified value during startup control. |
| Causes: | The detection temperature of the main thermistor did not increase after start of the power distribution to the heater. |
| Remedy: | - Check the fixing film connector. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E001-0000 |
| Description: | Abnormally high temperature (detected by main thermistor) The main thermistor detected an abnormally high temperature 235 deg C) during temperature control |
| Causes: | The main thermistor detected a temperature of higher than 255 degree C. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E001-0001 |
| Description: | Abnormally high temperature (detected by sub thermistor) The sub thermistor detected an abnormally high temperature (300 deg C) during temperature control. |
| Causes: | The sub thermistor detected a temperature of higher than 290 degree C. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E003-0000 |
| Description: | Abnormally low temperature (detected by main thermistor) After the temperature detected by the main thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
| Causes: | The main thermistor detected a temperature of lower than 120 degree C for more than 1 second when 20 seconds elapsed after start of the power distribution to the heater. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E003-0001 |
| Description: | Abnormally low temperature (detected by sub thermistor) After the temperature detected by the sub thermistor has reached the specified value, it does not reach the specified value during initial rotation. |
| Causes: | The sub thermistor detected a temperature of lower than 80 degree C for more than 2 seconds when 20 seconds elapsed after start of the power distribution to the heater. |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the DC controller PCB. |
| Error code: | E004-0000 |
| Description: | Fixing power supply drive circuit error |
| Causes: | 43 to 57Hz could not be detected continuously for more than 5 seconds when zero cross detection started. |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the DC Controller Board. (2) Replace the Fixing Assembly. |
| Error code: | E012-0000 |
| Description: | Error in ITB motor activation. |
| Causes: | The cycle of ITB motor speed detection signal does not move in the specified cycle after ITB motor drive is started. Cause Failure in ITB motor, failure in DC controller PCB |
| Remedy: | - Check the connectors of ITB motor and DC controller PCB - Replace the ITB motor - Replace the DC controller PCB |
| Error code: | E012-0001 |
| Description: | Error in ITB motor activation. |
| Causes: | If the ITB motor speed detection signal comes off the specified cycle after it turned once to the specified cycle. Cause Failure in ITB motor, failure in DC controller PCB. |
| Remedy: | - Check the connectors of ITB motor and DC controller PCB - Replace the ITB motor - Replace the DC controller PCB |
| Error code: | E014-0000 |
| Description: | Fixing motor failure |
| Causes: | Fixing motor startup error The target speed was not reached within a specified time after startup of the motor. |
| Remedy: | Check the contact of the connector between the fixing motor (J516) and the DC controller PCB (J81). Check the gear between the fixing motor and the fixing assembly. Replace the fixing motor. |
| Error code: | E014-0001 |
| Description: | Fixing motor failure |
| Causes: | Fixing motor rotation error The motor rotated out of the target speed during rotation after the target speed was reached. |
| Remedy: | Check the contact of the connector between the fixing motor (J516) and the DC controller PCB (J81). Check the gear between the fixing motor and the fixing assembly. Replace the fixing motor. |
| Error code: | E015-0000 |
| Description: | Developing disengagement motor failure |
| Causes: | Developing disengagement motor failure The standard flag was not detected even when driving was performed for 1000ms after rotation of the motor. The standard flag was not detected even when driving was performed for 8000ms at the time of switching from the full-color position to "all disengagement". The standard flag was not detected even when driving was performed for 3000ms at the time of switching from the monochrome position to "all disengagement". |
| Remedy: | Reconnect the connector J518 of the developing disengagement motor, the connector J1005 on the driver PCB, and the connector J91 on the DC controller PCB. Check the condition of the developing disengagement sensor in the sensor monitor mode. If a failure is found, replace the developing disengagement sensor assembly. Execute the developing assembly engagement/disengagement drive test in the actuator drive mode. If the developing assembly does not perform engagement/disengagement, replace the developing disengagement motor. |
| Error code: | E015-0001 |
| Description: | Cassette 1 lift up motor error |
| Causes: | Cassette 1 lift up motor error |
| Remedy: | Reconnect the connector J151 on the DC controller PCB and the relay connector J742. Check the cassette media stack surface sensor in the sensor monitor mode. If a failure is found, replace the lifter drive unit. Replace the lifter drive unit. |
| Error code: | E015-0002 |
| Description: | Cassette 2 lift up motor error |
| Causes: | Cassette 2 lift up motor error |
| Remedy: | Reconnect the connector J2003 on the paper feeder driver PCB and the relay connector J702. Check the paper feeder media stack surface sensor in the sensor monitor mode. If a failure is found, replace the pickup unit. Reconnect the connector J2006 on the paper feeder driver PCB. Replace the lifter drive unit. |
| Error code: | E020-0000 |
| Description: | Density sensor failure warning |
| Error code: | E021-1000 |
| Description: | Yellow Developing Motor rotation error |
| Causes: | It was judged that the Developing Motor did not rotate. |
| Remedy: | 1. Check the harness/connector between the Developing Motor (M3) and the Driver PCB (UN11). 2. Check the harness/connector between the Driver PCB (UN11) and the Engine Controller PCB (UN1). 3. Replace the Developing Motor (M3). 4. Replace the Driver PCB (UN11). 5. Replace the Engine Controller PCB (UN1) |
| Error code: | E021-1001 |
| Description: | Magenta Developing Motor rotation error |
| Causes: | It was judged that the Developing Motor did not rotate. |
| Remedy: | 1. Check the harness/connector between the Developing Motor (M3) and the Driver PCB (UN11). 2. Check the harness/connector between the Driver PCB (UN11) and the Engine Controller PCB (UN1). 3. Replace the Developing Motor (M3). 4. Replace the Driver PCB (UN11). 5. Replace the Engine Controller PCB (UN1). |
| Error code: | E021-1002 |
| Description: | Cyan Developing Motor rotation error |
| Causes: | It was judged that the Developing Motor did not rotate. |
| Remedy: | 1. Check the harness/connector between the Developing Motor (M3) and the Driver PCB (UN11). 2. Check the harness/connector between the Driver PCB (UN11) and the Engine Controller PCB (UN1). 3. Replace the Developing Motor (M3). 4. Replace the Driver PCB (UN11). 5. Replace the Engine Controller PCB (UN1). |
| Error code: | E021-1003 |
| Description: | Error in developing motor |
| Causes: | Developing motor does not rotate. Cause Failure in developing motor, failure in DC controller PCB. |
| Remedy: | - Check the connectors of developing motor, DC controller PCB - Replace the developing motor - Replace the DC controller PCB |
| Error code: | E021-2000 |
| Description: | Error in startup of the Yellow Developing Motor |
| Causes: | Revolution of the Developing Motor did not reach the specified value. |
| Remedy: | 1. Check the harness/connector between the Developing Motor (M3) and the Driver PCB (UN11). 2. Check the harness/connector between the Driver PCB (UN11) and the Engine Controller PCB (UN1). 3. Replace the Developing Motor (M3). 4. Replace the Driver PCB (UN11). 5. Replace the Engine Controller PCB (UN1). |
| Error code: | E021-2001 |
| Description: | Error in startup of the Magenta Developing Motor |
| Causes: | Revolution of the Developing Motor did not reach the specified value. |
| Remedy: | 1. Check the harness/connector between the Developing Motor (M3) and the Driver PCB (UN11). 2. Check the harness/connector between the Driver PCB (UN11) and the Engine Controller PCB (UN1). 3. Replace the Developing Motor (M3). 4. Replace the Driver PCB (UN11). 5. Replace the Engine Controller PCB (UN1). |
| Error code: | E021-2002 |
| Description: | Error in startup of the Cyan Developing Motor |
| Causes: | Revolution of the Developing Motor did not reach the specified value. |
| Remedy: | 1. Check the harness/connector between the Developing Motor (M3) and the Driver PCB (UN11). 2. Check the harness/connector between the Driver PCB (UN11) and the Engine Controller PCB (UN1). 3. Replace the Developing Motor (M3). 4. Replace the Driver PCB (UN11). 5. Replace the Engine Controller PCB (UN1). |
| Error code: | E021-2003 |
| Description: | Error in developing motor |
| Causes: | The cycle of developing motor speed detection signal does not move in the specified cycle after developing motor drive is started. Cause Failure in developing motor, failure in DC controller PCB |
| Remedy: | - Check the connectors of developing motor, DC controller PCB - Replace the developing motor - Replace the DC controller PCB |
| Error code: | E052-0000 |
| Description: | Erroneous connection to duplex unit Disconnection of the duplex unit was detected after power-on, detection of normal connection to the duplex unit, and start of communication. |
| Causes: | Failed to detect 2-sided unit Cause: improper 2-sided unit connection |
| Remedy: | - Check the connectors of the duplex unit and DC controller PCB. - Replace the duplex controller PCB. - Replace the DC controller PCB. |
| Error code: | E066-0000 |
| Description: | Environment sensor failure |
| Causes: | Environment sensor failure |
| Remedy: | Replace the environment sensor. |
| Error code: | E078-0000 |
| Description: | Error in primary transfer disengagement. |
| Causes: | Primary transfer disengagement mechanism did not work properly. Cause Disengagement mechanism error, ITB Tension Sensor error, Pickup Motorerror, DC Controller PCB error |
| Remedy: | - Check the disengagement mechanism. - Check the connectors of the ITB Tension - - Sensor, Pickup Motor and the DC Controller PCB (J167, J202, J160, J201, J140). - Replace the ITB Tension Sensor. - Replace the Pickup Motor. - Replace the DC Controller PCB. |
| Error code: | E100-0000 |
| Description: | BD detection PCB failure The BD detection PCB is faulty. |
| Causes: | Yellow optical assembly failure |
| Remedy: | - Check the connector of the BD detection PCB. - Replace the laser scanner unit. - Replace the DC controller PCB. |
| Error code: | E100-0001 |
| Description: | Error detection on any of scanner motor, laser unit, and BD detection at scanner area. |
| Causes: | Magenta optical assembly failure |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Laser Scanner Unit. (2) Replace the DC Controller Board. |
| Error code: | E100-0002 |
| Description: | Optical assembly error (Laser) |
| Causes: | Cyan optical assembly failure |
| Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
| Error code: | E100-0003 |
| Description: | Optical assembly error (Laser) |
| Causes: | Black optical assembly failure |
| Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
| Error code: | E110-0000 |
| Description: | Optical assembly error (Scanner motor) |
| Causes: | Optical assembly error (Scanner motor initial operation failure) |
| Remedy: | Check the contact of the connector between the laser scanner unit and the DC controller. Replace the laser scanner unit. |
| Error code: | E194-0000 |
| Description: | Error in CPR sensor |
| Causes: | If CPR sensor is judged error. Cause Soiling in density detection sensor, failure in density detection sensor, failure in DC controller PCB, failure in toner cartridge. |
| Remedy: | - Check the connector of DC controller PCB - Replace the ITB unit - Replace the DC controller PCB - Replace the toner cartridge |
| Error code: | E196-0000 |
| Description: | Invalid RFU execution requested |
| Causes: | D-con update for the host machine or the optional cassette is not completed. |
| Error code: | E196-1000 |
| Description: | Main Controller PCB reading/writing error Error in reading/writing of main program in the Main Controller PCB |
| Causes: | Error in writing in / reading from ROM (main) Cause: Problem in main controller PCB |
| Remedy: | 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB. |
| Error code: | E196-2000 |
| Description: | ROM read/write error (Error in storing each setting values for user mode / service mode / factory mode) |
| Causes: | Error in writing in/reading from ROM (storing settings) Cause: Problem in main controller PCB |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Update the set of the Controller Firmware (2) Replace the Main Controller Board. |
| Error code: | E196-3000 |
| Description: | ROM writing/reading error (eMMC) |
| Causes: | Unable to read/write data from the eMMC. The eMMC failure occurred. |
| Remedy: | 1. Update the firmware. 2. Replace the Main Controller PCB (UN30). |
| Error code: | E196-3001 |
| Description: | ROM-ID mismatch (eMMC) |
| Causes: | The eMMC was replaced incorrectly. The eMMC failure occurred. |
| Remedy: | 1. Update the firmware. 2. Replace the Main Controller PCB (UN30). |
| Error code: | E198-0000 |
| Description: | DC controller memory failure |
| Causes: | A checksum failure is found in the block where specific information of the DC controller PCB is saved. A communication error occurred when reading the specific information of the DC controller PCB from the NVRAM at power-on. |
| Remedy: | If the failure cannot be removed by turning the power OFF/ON, replace the DC controller PCB. |
| Error code: | E202-0001 |
| Description: | Reader HP sensor fault |
| Causes: | Reader HP outward fault The CCD unit moves backward, but does not move to the home position. |
| Remedy: | - Replace reader HP sensor. - Replace reader motor sensor. - Replace reader unit. |
| Error code: | E202-0002 |
| Description: | Contact Sensor HP error, Failure in return |
| Causes: | Reader HP homeward fault - Replace reader unit. The CCD unit moves forward, but does not move to the home position. |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor. (2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor. (3) Replace the Contact Sensor. (4) Replace the Main Controller Board. |
| Error code: | E225-0001 |
| Description: | Light intensity of a lamp is less or equal to the criteria |
| Causes: | When the light intensity is at the reference level or below at shading. |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the connection of Flat Cable between Main Controller Board (J5) and Contact Sensor. (2) Replace the Flat Cable between Main Controller Board (J5) and Contact Sensor. (3) Replace the Contact Sensor. (4) Replace the Main Controller Board. |
| Error code: | E246-0000 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E247-0000 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E248-0001 |
| Description: | EEPROM access error |
| Causes: | Error at EEPROM power-on EEPROM data cannot be read at power-on. |
| Remedy: | Replace reader unit. |
| Error code: | E350-0000 ... E355-0005 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the sales company. |
| Error code: | E719-0000 |
| Description: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Causes: | Erroneous communication with card reader (serial communication) - Disconnection from the card reader has been detected since communication started after confirmation of normal connection to the card reader (after power-on). - A serial communication error has occurred. (The serial communication error cannot be recovered.) |
| Remedy: | - Check the connectors of the card reader and image processor PCB. - Replace the card reader for normal connection. - Replace the image processor PCB. |
| Error code: | E732-0000 |
| Description: | Scanner communication error. |
| Causes: | Scanner communication error |
| Remedy: | 1. Install the set of the controller firmware. 2.Replace the Main Controller PCB (UN30). |
| Error code: | E733-0000 |
| Description: | Erroneous communication between controller and printer Cannot communicate with the printer at startup. |
| Causes: | Printer communication error (communication error at initial communication and negotiation packet error) |
| Remedy: | - Check the connectors of the DC controller PCB and image processor PCB for normal connection. - Check the power supply of the printer (Check whether initialization is performed at startup). - Replace the DC controller PCB or image processor PCB. |
| Error code: | E736-0000 |
| Description: | CCU communication error The installed modem PCB is incompatible. |
| Causes: | Error in CCU-modem communication Cause: Problem in FAX-NCU PCB / main controller PCB |
| Remedy: | - Check the connectors of the image processor PCB and modem. - Replace the modem PCB. - Replace the image processor PCB. |
| Error code: | E736-0001 |
| Description: | Error in ROM for backing up fax data |
| Causes: | An error occurred in ROM for backing up fax data. |
| Remedy: | 1. Check the connection of the NCU PCB (UN38). 2. Replace the NCU PCB (UN38). 3. Replace the Main Controller PCB (UN30). |
| Error code: | E743-0000 |
| Description: | Error in main controller communication An error in reading of/writing to the Flash ROM in the Main Controller occurred. |
| Causes: | Software sequence error |
| Remedy: | 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB. |
| Error code: | E744-0001 |
| Description: | Language file/boot ROM/USB memory error The language file version does not match Bootable. |
| Causes: | Language file version error The language file version does not match Bootable. |
| Remedy: | Download a language file of the correct version. |
| Error code: | E744-0002 |
| Description: | Language file/boot ROM/USB memory error The language file is longer than the permitted size. |
| Causes: | Language file size error The language file is longer than the permitted size. |
| Remedy: | Download a language file of the correct version. |
| Error code: | E744-1001 |
| Description: | Firmware version error Version of the main program and the version of the start-up program was not matched. |
| Causes: | Versions of Bootable and BootRom do not match |
| Remedy: | Install the set of the controller firmware. |
| Error code: | E744-4000 |
| Description: | Engine ID error (Invalid engine connection is detected) |
| Causes: | Error in engine ID Detected illegal engine connection |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Check the DC Controller Board. (2) Update the Engine Firmware. (3) Update the set of the Controller Firmware |
| Error code: | E744-5000 |
| Description: | Error in the Control Panel PCB Error in the Control Panel PCB (microcomputer). |
| Causes: | Error in panel microcomputer |
| Remedy: | 1. Check the Control Panel PCB, and install the firmware (PANEL). 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. |
| Error code: | E744-6000 |
| Description: | Communication error with Wireless LAN board. |
| Causes: | Communication with the Wireless LAN PCB could not be established. |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Wireless LAN Board. (4) Replace the Main Controller Board. |
| Error code: | E744-7000 |
| Description: | Main Controller PCB error An error in the microcomputer which retains fax job information of the Main Controller PCB. |
| Causes: | An error in the microcomputer which retains fax job information of the Main Controller PCB. |
| Remedy: | 1. Install the firmware of BKUP. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. |
| Error code: | E746-0000 |
| Description: | Main Controller PCB error Main Controller communication error occurred (other than scan). |
| Causes: | Communication error occurred in main controller PCB (other than scannerrelated) Cause: Problem in main controller PCB |
| Remedy: | 1. Install the set of the controller firmware. 2. Replace the Main Controller PCB. |
| Error code: | E766-8000 |
| Description: | Digital registration error Information at digital registration could not be obtained. |
| Causes: | Incorrect digital registration 3 point information Cause: Problem in firmware |
| Remedy: | 1. Install the Engine Controller firmware. 2. Install the set of the controller firmware. 3. Replace the Engine Controller PCB. |
| Error code: | E766-9000 |
| Description: | Scanner power state error An error was detected in power state of the Laser Scanner Unit. |
| Causes: | Error in laser scanner unit power supply Cause: Problem in firmware |
| Error code: | E805-0005 |
| Description: | Error in duplex cooling fan |
| Causes: | Duplex cooling fan can not rotate the specified number of rotations. Cause Failure in duplex cooling fan, failure in DC controller PCB |
| Remedy: | - Check the connectors of duplex cooling fan and DC controller PCB - Replace the duplex cooling fan |
| Error code: | E806-0000 |
| Description: | Fan Motor cannot rotate at specified revolution speed. |
| Causes: | Fixing / fixing power supply cooling fan does not rotate in the specified rotation speed. Cause: Problem in fixing / fixing power supply cooling fan / DC controller PCB |
| Remedy: | When the same error repeatedly occurs after several times of turning the power OFF/ON, execute the following remedies. (1) Replace the Main Fan Unit. (2) Replace the DC Controller Board. |
| Error code: | E808-0000 |
| Description: | Fixing drive circuit failure - The heater does not turn on. - A fixing drive motor failure was detected. |
| Causes: | Printer detected failure in low-voltage power supply Cause: Failure in low-voltage power supply, problem in DC controller PCB |
| Remedy: | - Check the connector of the fixing film unit. - Replace the fixing film unit. - Replace the fixing drive motor. - Replace the DC controller PCB. - Replace the power supply PCB. |
| Error code: | E840-0000 |
| Description: | Pressure release mechanism failure |
| Causes: | The target pressure position was not reached even when 3.5 seconds (approximately 1.5 rotation of the cam) elapsed after start of the fixing motor reverse rotation. |
| Remedy: | Check the gears and detection flags related to fixing pressure release mechanism. Replace the fixing pressure release sensor (PS9). Replace the fixing motor. Replace the fixing assembly. |
