Canon LBP6600
Рейтинг
Модули
102 INTERNAL COMPONENTS 2
100 EXTERNAL COVERS, PANELS, ETC.
900 MAIN CONTROLLER PCB ASSY
901 ENGINE CONTROLLER ASSY
104 INTERNAL COMPONENTS 4
105 INTERNAL COMPONENTS 5
101 INTERNAL COMPONENTS 1
103 INTERNAL COMPONENTS 3
Детали 105 INTERNAL COMPONENTS 5
| Деталь: | PAD, MULTI-PURPOSE SEPARATION |
| Парткод: | RL1-2115-000 |
| Деталь: | PAPER PICK-UP GEAR ASSY |
| Парткод: | RM1-1301-000 |
| Деталь: | MULTI-PURPOSE SENSOR PCB ASSY |
| Парткод: | RM1-6350-000 |
| Деталь: | INLET AC RELAY CABLE |
| Парткод: | FM0-1141-000 |
| Цена: | 800 ₽ |
| Деталь: | MAIN MOTOR ASSY |
| Парткод: | RM1-6378-000 |
| Деталь: | PAPER PICK-UP ROLLER ASSY |
| Парткод: | RM1-6414-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | INTERNAL COMPONENTS 2 |
| Парткод: | NPN |
| Деталь: | LABEL, DUPLEXING SIZE CONTROL |
| Парткод: | FC0-4235-000 |
| Цена: | 340 ₽ |
| Деталь: | COVER, RIGHT, UPPER |
| Парткод: | FC0-4236-000 |
| Деталь: | COVER, RIGHT, UPPER |
| Парткод: | FC0-4282-000 |
| Цена: | 420 ₽ |
| Деталь: | COVER, RIGHT, UPPER |
| Парткод: | FC0-4283-000 |
| Цена: | 420 ₽ |
| Деталь: | COVER, RIGHT, UPPER |
| Парткод: | FC0-4285-000 |
| Деталь: | COVER, RIGHT, UPPER |
| Парткод: | FC0-4287-000 |
| Деталь: | COVER, FRONT |
| Парткод: | FC8-9837-000 |
| Цена: | 1 100 ₽ |
| Деталь: | COVER, RIGHT |
| Парткод: | FC0-4252-000 |
| Цена: | 2 700 ₽ |
| Деталь: | LABEL, MP, SIZE |
| Парткод: | FC0-4239-000 |
| Цена: | 250 ₽ |
| Деталь: | LABEL, MP, SIZE |
| Парткод: | FC0-4241-000 |
| Деталь: | LABEL, ATTENTION |
| Парткод: | FC8-9896-000 |
| Цена: | 230 ₽ |
| Деталь: | COVER, LEFT |
| Парткод: | FC0-4251-000 |
| Цена: | 2 600 ₽ |
| Деталь: | REAR COVER ASSY |
| Парткод: | FM4-8671-000 |
| Цена: | 3 700 ₽ |
| Деталь: | OPERATION PANEL ASSY |
| Парткод: | FM4-8677-000 |
| Деталь: | OPERATION PANEL ASSY |
| Парткод: | FM4-8678-000 |
| Деталь: | OPERATION PANEL ASSY |
| Парткод: | FM4-8679-000 |
| Деталь: | OPERATION PANEL ASSY |
| Парткод: | FM4-8680-000 |
| Деталь: | OPERATION PANEL ASSY |
| Парткод: | FM4-8681-000 |
| Деталь: | CARTRIDGE DOOR ASSY |
| Парткод: | FM4-8683-000 |
| Цена: | 9 100 ₽ |
| Деталь: | HINGE, MULTI-PURPOSE, RIGHT |
| Парткод: | RC2-6273-000 |
| Цена: | 280 ₽ |
| Деталь: | HINGE, MULTI-PURPOSE, LEFT |
| Парткод: | RC2-8291-000 |
| Цена: | 310 ₽ |
| Деталь: | SPRING, TENSION |
| Парткод: | RU5-2895-000 |
| Деталь: | LABEL, GROUNDING CAUTION |
| Парткод: | FC8-9985-000 |
| Деталь: | LABEL, CAUTION |
| Парткод: | FC0-4281-000 |
| Цена: | 230 ₽ |
| Деталь: | COVER, SWITCH |
| Парткод: | FC0-4270-000 |
| Цена: | 250 ₽ |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SCREW, TAP, M3X6 |
| Парткод: | XA9-1503-000 |
| Цена: | 340 ₽ |
| Деталь: | COVER, USB |
| Парткод: | FC0-4275-000 |
| Деталь: | COVER, USB |
| Парткод: | FC0-4269-000 |
| Деталь: | TOP COVER ASSY |
| Парткод: | FM4-8674-000 |
| Цена: | 5 700 ₽ |
| Деталь: | COVER, DIMM |
| Парткод: | FC0-4268-000 |
| Цена: | 2 100 ₽ |
| Деталь: | EXTERNAL COVERS, PANELS, ETC. |
| Парткод: | NPN |
| Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
| Парткод: | FM0-1296-000 |
| Цена: | 73 000 ₽ |
| Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
| Парткод: | FM0-1297-000 |
| Цена: | 65 700 ₽ |
| Деталь: | MAIN CONTROLLER PCB ASSEMBLY |
| Парткод: | FM0-0908-000 |
| Деталь: | IC, STR-W6735C RP, REGULATOR |
| Парткод: | RK2-0549-000 |
| Деталь: | IC, STR-W6765C RP, REGULATOR |
| Парткод: | RK2-0550-000 |
| Деталь: | ENGINE CONTROLLER ASSY |
| Парткод: | FM0-1136-000 |
| Деталь: | ENGINE CONTROLLER ASSY |
| Парткод: | FM0-1137-000 |
| Деталь: | CASSETTE ASSY |
| Парткод: | FM3-8839-000 |
| Деталь: | POWER SWITCH PCB ASSY |
| Парткод: | FM0-1140-000 |
| Цена: | 500 ₽ |
| Деталь: | DUPLEX DRIVER PCB ASSY |
| Парткод: | FM0-1149-000 |
| Деталь: | FAN |
| Парткод: | RK2-2728-000 |
| Деталь: | SOLENOID |
| Парткод: | RK2-2729-000 |
| Цена: | 900 ₽ |
| Деталь: | SOLENOID |
| Парткод: | RK2-2731-000 |
| Деталь: | ROLLER, MULTI-PURPOSE PICK-UP |
| Парткод: | RL1-2120-000 |
| Деталь: | PAPER PICK-UP GEAR ASSY |
| Парткод: | RM1-4275-020 |
| Деталь: | SEPARATION PAD HOLDER ASSY |
| Парткод: | RM1-6397-000 |
| Деталь: | MICROSWITCH |
| Парткод: | WC4-5171-000 |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | LABEL, PROHIBITION DOCUMENT |
| Парткод: | FC7-9850-000 |
| Цена: | 230 ₽ |
| Деталь: | AC RELAY ASSY |
| Парткод: | FM0-1139-000 |
| Цена: | 3 200 ₽ |
| Деталь: | EVERYNIGHT POWER PCB ASSEMBLY |
| Парткод: | FK3-1986-000 |
| Цена: | 3 900 ₽ |
| Деталь: | INTERNAL COMPONENTS 4 |
| Парткод: | NPN |
| Деталь: | COVER, SD CARD |
| Парткод: | FC0-4309-000 |
| Цена: | 250 ₽ |
| Деталь: | SOLENOID |
| Парткод: | RK2-2733-000 |
| Деталь: | REVERSE DRIVE ASSY |
| Парткод: | RM1-6423-000 |
| Деталь: | DUPLEXING PAPER FEED ASSY |
| Парткод: | RM1-6441-000 |
| Деталь: | SCREW, TAP, M3X6 |
| Парткод: | XA9-1503-000 |
| Цена: | 340 ₽ |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | SLEEP IF ASSY |
| Парткод: | FM0-1138-000 |
| Цена: | 4 500 ₽ |
| Деталь: | SCREW, W/WASHER, M3X8 |
| Парткод: | XA9-1420-000 |
| Цена: | 1 100 ₽ |
| Деталь: | CABLE USB |
| Парткод: | FK3-2710-000 |
| Цена: | 1 800 ₽ |
| Деталь: | INTERNAL COMPONENTS 5 |
| Парткод: | NPN |
| Деталь: | FIXING ASSY (220-240V) |
| Парткод: | FM3-9088-000 |
| Деталь: | FIXING ASSY (220-240V) |
| Парткод: | RM1-6405-000 |
| Деталь: | FIXING ASSY (220-240V) |
| Парткод: | RM1-6406-000 |
| Деталь: | PAPER RETAINING DELIVERY ASSY |
| Парткод: | RM1-6401-000 |
| Деталь: | MAIN DRIVE ASSY |
| Парткод: | RM1-6421-000 |
| Цена: | 4 400 ₽ |
| Деталь: | REVERSE SENSOR ASSY |
| Парткод: | RM1-6445-000 |
| Деталь: | SCREW, TAP, M3X6 |
| Парткод: | XA9-1503-000 |
| Цена: | 340 ₽ |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | PIN LARGE GEAR |
| Парткод: | RC2-8349-000 |
| Цена: | 600 ₽ |
| Деталь: | ROLLER, FACE-DOWN |
| Парткод: | RL1-2112-000 |
| Цена: | 500 ₽ |
| Деталь: | FACE-DOWN ROLLER UNIT |
| Парткод: | RL1-2111-000 |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RU6-2610-000 |
| Цена: | 230 ₽ |
| Деталь: | ARM, LINK, 1 |
| Парткод: | RC2-6198-000 |
| Цена: | 250 ₽ |
| Деталь: | INTERNAL COMPONENTS 1 |
| Парткод: | NPN |
| Деталь: | TOP SENSOR ASSY |
| Парткод: | FM4-8672-000 |
| Деталь: | SCANNER ASSY |
| Парткод: | RM1-6424-000 |
| Деталь: | TRANSFER ROLLER ASSY |
| Парткод: | RM1-6450-000 |
| Деталь: | CABLE, LASER FLEXIBLE FLAT |
| Парткод: | RK2-3708-000 |
| Цена: | 340 ₽ |
| Деталь: | PAPER FEED GUIDE ASSY |
| Парткод: | RM1-6402-000 |
| Деталь: | REGISTRATION ASSY |
| Парткод: | RM1-6419-000 |
| Деталь: | SCREW, W/WASHER, M3X8 |
| Парткод: | XA9-1420-000 |
| Цена: | 1 100 ₽ |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000 |
| Цена: | 170 ₽ |
| Деталь: | INTERNAL COMPONENTS 3 |
| Парткод: | NPN |
Коды ошибок
E000 0000
E001 0000
E003 0000
E004 0000
E014 0000
E06F 0068
E100 0000
E245 2012 ... E247 0004
E602 0002
E602 0008
E602 0009
E602 1102
E602 1112
E602 1113
E602 1302
E602 1312
E602 1313
E602 1602
E602 1612
E602 1613
E604 0000
E604 0001
E616 0001
E616 0002
E730 100A
E730 C000
E730 C001
E730 D000
E730 D001
E733 0000
E733 0001
E733 0004
E733 0006
E740 0002
E744 1000
E744 1100
E748 2012
E760 0000
E805 0000
E808 0001
Описание
| Error code: | E000 0000 |
| Description: | Error in temperature rising of Fixing Assembly |
| Causes: | Temperature of the Fixing Assembly did not reach a certain temperature within the specified period of time. |
| Remedy: | 1. Check the connector between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB. |
| Error code: | E001 0000 |
| Description: | Abnormal high temperature of Fixing Assembly |
| Causes: | It was detected that the temperature of the Fixing Assembly was abnormally high. |
| Remedy: | 1. Check the connector between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB. |
| Error code: | E003 0000 |
| Description: | Abnormal low temperature of Fixing Assembly |
| Causes: | It was detected that the temperature of the Fixing Assembly was abnormally low. |
| Remedy: | 1. Check the connector between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB. |
| Error code: | E004 0000 |
| Description: | Error in fixing power supply drive circuit |
| Causes: | Failed to detect the zero cross signal for the specified period of time or more. |
| Remedy: | 1. Check the connection of connector between the Fixing Assembly and the Engine Controller PCB. 2. Replace the Fixing Assembly. 3. Replace the Engine Controller PCB. |
| Error code: | E014 0000 |
| Description: | Error in startup of the Main Motor |
| Causes: | Revolution of the Main Motor did not reach the specified value. |
| Remedy: | 1. Check the connection of connector between the Main Motor and the Engine Controller PCB. 2. Replace the Main Motor. 3. Replace the Engine Controller PCB. |
| Error code: | E06F 0068 |
| Description: | EEPROM access failure |
| Causes: | EEPROM communication error |
| Remedy: | Replace the EEPROM. |
| Error code: | E100 0000 |
| Description: | Laser Scanner Assembly error |
| Causes: | At the Laser Scanner Unit, BD cycle was not within the specified range. |
| Remedy: | 1. Check the connection of connector between the Main Controller PCB and the Laser Scanner Unit. 2. Check the connection of connector between the Relay PCB and the Laser Scanner Unit. 3. Replace the Laser Scanner Unit. |
| Error code: | E245 2012 ... E247 0004 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Contact the service company office |
| Error code: | E602 0002 |
| Description: | Bootable load failure A Bootable CD was not contained. A Bootable CD was damaged. |
| Causes: | Bootable load failure |
| Remedy: | Burn the Bootable CD again. |
| Error code: | E602 0008 |
| Description: | There is not enough free space in the alternative block of NAND Flash |
| Causes: | Remaining memory area in the flash is small. |
| Remedy: | 1) Start service mode. 2) Clear the error from the service mode menu. 3) Reboot the machine to stop the error code. 4) Export the user information from the old NAND Flash. 5) Replace the Controller Board. (Change the NAND Flash.) 6) Import the user information to the new NAND Flash. |
| Error code: | E602 0009 |
| Description: | The power supply was interrupted due to power failure or disconnection of the power plug. The MEAP area in the Flash ROM (NAND ROM) became read-only and cannot be written. MEAP cannot be started. |
| Causes: | MEAP cannot be started due to an error caused by invalid power down. |
| Remedy: | Initialize the MEAP area in Flash ROM (NAND ROM) by enabling the MEAP recovery menu from service mode or special management mode and rebooting the machine. Since the installed MEAP applications and their management information are all cleared, MEAP needs to be reinstalled. |
| Error code: | E602 1102 |
| Description: | /APL_MEAP error (The file systemcannot be initialized properly.) |
| Causes: | File system could not be initialized normally (MEAP-related). |
| Error code: | E602 1112 |
| Description: | /APL_MEAP error (device access error EROFS) |
| Causes: | Device access error (MEAP-related). |
| Error code: | E602 1113 |
| Description: | /APL_MEAP error (device access error EIO) |
| Causes: | Device access error (MEAP-related). |
| Error code: | E602 1302 |
| Description: | /APL_KEEP error (The file systemcannot be initialized properly.) |
| Causes: | File system could not be initialized normally |
| Error code: | E602 1312 |
| Description: | /APL_KEEP error (device access error EROFS) |
| Causes: | Device access error |
| Error code: | E602 1313 |
| Description: | /APL_KEEP error (device access error EIO) |
| Causes: | Device access error |
| Error code: | E602 1602 |
| Description: | /APL_CDS error (The file systemcannot be initialized properly.) |
| Causes: | File system could not be initialized normally (CDS-related). |
| Error code: | E602 1612 |
| Description: | /APL_CDS error (device access error EROFS) |
| Causes: | Device access error (CDS-related). |
| Error code: | E602 1613 |
| Description: | /APL_CDS error (device access error EIO) |
| Causes: | Device access error (CDS-related). |
| Error code: | E604 0000 |
| Description: | Memory capacity error ?(Lack of memory capacity?) |
| Causes: | Lack of memory capacity |
| Remedy: | Check the memory capacity inserted to each slot. |
| Error code: | E604 0001 |
| Description: | Memory error |
| Causes: | Failed to allocate the memory required to start PDL. |
| Remedy: | Check the installed memory, remove and then install the memory, and replace the memory. |
| Error code: | E616 0001 |
| Description: | Installed MEAP applications have been deleted. |
| Causes: | MEAP application is lost. |
| Error code: | E616 0002 |
| Description: | System error |
| Causes: | System error |
| Remedy: | Execute Setup > Initialize Panel Setting to initialize NVRAM. |
| Error code: | E730 100A |
| Description: | System error |
| Causes: | System error |
| Remedy: | 1. Turn OFF and then ON the main power. 2. Replace the Main Controller PCB. |
| Error code: | E730 C000 |
| Description: | The memory cannot be obtained at initialization. |
| Causes: | An error, such as failure in memory retrieval at initialization, occurred. |
| Remedy: | Turn OFF and then ON the power. |
| Error code: | E730 C001 |
| Description: | An error occurred when accessing the HDD. |
| Causes: | An error occurred when accessing the controller. |
| Remedy: | Turn OFF and then ON the power. |
| Error code: | E730 D000 |
| Description: | The memory cannot be obtained at initialization. |
| Causes: | An error, such as failure in memory retrieval at initialization, occurred. |
| Remedy: | Turn OFF and then ON the power. |
| Error code: | E730 D001 |
| Description: | An error occurred when accessing the HDD. |
| Causes: | System error |
| Remedy: | Turn OFF and then ON the power. |
| Error code: | E733 0000 |
| Description: | Printer communication error |
| Causes: | Communication error between the Engine Controller PCB and the Main Controller PCB occurred. |
| Remedy: | 1. Check the connection of connector between the Engine Controller PCB and the Main Controller PCB. 2. Install the set of the controller firmware. 3. Replace the Main Controller PCB. 4. Replace the Engine Controller PCB. |
| Error code: | E733 0001 |
| Description: | Error in printer communication (illegal communication after establishing communication, parity error) |
| Causes: | Communication error occurred after normal startup. |
| Remedy: | 1) Turn OFF and then ON the power. 2) Replace the Engine Controller PCB. |
| Error code: | E733 0004 |
| Description: | Error in printer communication (undefined command error) |
| Causes: | Command error |
| Remedy: | 1) Turn OFF and then ON the power. 2) Replace the Engine Controller PCB. |
| Error code: | E733 0006 |
| Description: | Error in printer communication (unknown communication error) |
| Causes: | An unknown communication error |
| Remedy: | 1) Turn OFF and then ON the power. 2) Replace the Engine Controller PCB. |
| Error code: | E740 0002 |
| Description: | An invalid MAC address has been detected. |
| Causes: | Detected the injustice of the Mac address |
| Remedy: | 1) Check the Mac address. 2) Write the address to the Mac address. 3) Replace the board. |
| Error code: | E744 1000 |
| Description: | Mismatch of the series or model of the firmware sent at the time of downloading |
| Causes: | Mismatch of the model for which the firmware was downloaded is detected. |
| Remedy: | Change to proper bootable. Check the supported series or model of the firmware, and burn the correct series or model of firmware. Replace the Main Controller Board. |
| Error code: | E744 1100 |
| Description: | Falsification of the Main Controller Board has been detected. |
| Causes: | System error |
| Remedy: | Change to proper bootable. Check the supported series or model of the firmware, and burn the correct series or model of firmware. Replace the Main Controller Board. |
| Error code: | E748 2012 |
| Description: | Failed to rewrite due to no more alternative block of Flash ROM (NAND) available. |
| Causes: | System error |
| Remedy: | Replace the Controller board. |
| Error code: | E760 0000 |
| Description: | CPU exception occurred. |
| Causes: | An error due to the controller software occurred so that print could not be proceeded. |
| Remedy: | Turn on the power again. |
| Error code: | E805 0000 |
| Description: | Main Fan error |
| Causes: | The Main Fan was locked for a specified consecutive period of time. |
| Remedy: | 1. Check the connection of the Main Fan. 2. Replace the Main Fan. |
| Error code: | E808 0001 |
| Description: | Low-voltage power supply failure |
| Causes: | Failure detection of Low Voltage Power Supply PCB |
| Remedy: | Replace the Low-voltage power supply unit. |
