Epson AcuLaser C8600
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
60000
Скорость печати
A4
35
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Цветность печати |
цветная |
Тип устройства |
Принтер |
Телефон |
|
Факс |
|
Копир |
|
Печать фотографий |
|
Сканер |
|
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Число страниц в месяц |
60 000 |
Область применения |
средний офис |
Макс. формат |
A3 |
Принтер |
|
Двусторонняя печать |
|
Прямая печать |
|
Пигментные чернила |
|
Печать без полей |
|
Количество цветов |
4 |
Макс, разрешение для ч/б печати |
|
| По X | 600 |
| По Y | 600 |
Скорость ч/б печати |
|
| A4 | 35 |
Скорость цветной печати |
|
| A4 | 8 |
Сканер |
|
Стандарт TWAIN |
|
Стандарт WIA |
|
Отправка изображения по e-mail |
|
Расходные материалы |
|
Ресурс цветного картриджа/тонера |
6 000 |
Ресурс ч/б картриджа/тонера |
5 500 |
Печать на: |
|
| Рулоне |
|
| Фотобумаге |
|
| CD/DVD |
|
| Конвертах |
|
| Этикетках |
|
| Матовой бумаге |
|
| Пленках |
|
| Глянцевой бумаге |
|
Факс |
|
Цветной |
|
Телефон |
|
Caller ID |
|
Автоответчик |
|
Стандарт DECT |
|
Спикерфон |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Языки управления |
|
| PostScript |
|
Подача бумаги |
|
| Стандартная | 400 |
Интерфейсы |
|
USB |
|
LPT |
|
Ethernet (RJ-45) |
|
Bluetooth |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Инфракрасный порт |
|
Память/Процессор |
|
Макс, объем памяти |
1 024 |
Объем памяти |
64 |
Дополнительная информация |
|
Поддержка ОС |
|
| DOS |
|
| Linux |
|
| Windows |
|
| Mac OS |
|
Уровень шума |
|
| При работе | 55 |
Габариты |
|
Глубина |
554 |
Высота |
647 |
Вес |
70 |
Ширина |
650 |
Модули
MECH-021
MECH-0284
MECH-039
MECH-030
MECH-036
MECH-025
MECH-024
POWE-004
MECH-0292
ELEC-002
MECH-033
MECH-0322
MECH-037
MECH-022
MECH-034
MECH-0313
MECH-027
CASE-002
POWE-003
MECH-026
MECH-0423
MECH-023
MECH-035
MECH-038
Детали MECH-0423
| Деталь: | UNIVERSAL TRAY |
| Парткод: | 1110063 |
| Деталь: | PLATE LINK SPRING |
| Парткод: | 1042101 |
| Деталь: | PLATE LINK |
| Парткод: | 1042102 |
| Деталь: | BOTTOM PLATE ASSY |
| Парткод: | 1091884 |
| Деталь: | TRAY N/F SPRING |
| Парткод: | 1042104 |
| Деталь: | FRONT GUIDE |
| Парткод: | 1042105 |
| Деталь: | FRONT SNUBBER |
| Парткод: | 1091886 |
| Деталь: | SNUBBER STOPPER |
| Парткод: | 1042107 |
| Деталь: | SNUBBER LABEL |
| Парткод: | 1110064 |
| Деталь: | REAR GUIDE ASSY |
| Парткод: | 1110065 |
| Деталь: | REAR GUIDE SPRING |
| Парткод: | 1042109 |
| Деталь: | END GUIDE |
| Парткод: | 1091889 |
| Деталь: | TRAY SIZE ACUTUATOR |
| Парткод: | 1042111 |
| Деталь: | CESTOR GEAR |
| Парткод: | 1054098 |
| Деталь: | SPRING |
| Парткод: | 1054100 |
| Деталь: | DEVELOPER ASSY Y |
| Парткод: | 1110066 |
| Деталь: | DEVELOPER ASSY M |
| Парткод: | 1110067 |
| Деталь: | DEVELOPER ASSY C |
| Парткод: | 1110068 |
| Деталь: | DEVELOPER ASSY BK |
| Парткод: | 1110069 |
| Деталь: | SHUTTER CTRG |
| Парткод: | 1282648 |
| Деталь: | PKG KIT TR 50X4 |
| Парткод: | 1301684 |
| Деталь: | PKG KIT TR 100X4 |
| Парткод: | 1301685 |
| Деталь: | ROTARY FRAME ASSY |
| Парткод: | 1092037 |
| Деталь: | ROTARY LATCH ASSY |
| Парткод: | 1092038 |
| Деталь: | DEVE.CONTACT PLATE ASSY |
| Парткод: | 1056892 |
| Деталь: | ROTARY SENSOR |
| Парткод: | 1042195 |
| Деталь: | USED CRT.SENSOR |
| Парткод: | 2071548 |
| Деталь: | ROTARY GEAR ASSY |
| Парткод: | 1301681 |
| Деталь: | POWER CABLE |
| Парткод: | 2088264 |
| Деталь: | FRAME FOOT |
| Парткод: | 1042245 |
| Деталь: | SHEET CLAMP |
| Парткод: | 1056919 |
| Деталь: | 2ND BTR CAM ASSY |
| Парткод: | 2101743 |
| Деталь: | BTR REAR BRACKET ASSY |
| Парткод: | 1092039 |
| Деталь: | AUGER HIGH ASSY |
| Парткод: | 1213010 |
| Деталь: | IBT REAR BRACKET ASSY |
| Парткод: | 1092041 |
| Деталь: | TRANSFER HIGH ASSY |
| Парткод: | 2060903 |
| Деталь: | TENSION LEVER |
| Парткод: | 1056896 |
| Деталь: | 2ND BTR ASSY |
| Парткод: | 2060901 |
| Деталь: | BELT CLEANER ASSY |
| Парткод: | 2060902 |
| Деталь: | IBT BELT ASSY |
| Парткод: | 1056901 |
| Деталь: | TENSION SHAFT SPRINF |
| Парткод: | 1061170 |
| Деталь: | TRO SENSOR |
| Парткод: | 2035763 |
| Деталь: | TRO HARNESS |
| Парткод: | 2040930 |
| Деталь: | KIT TRANSFER MECH |
| Парткод: | 1422658 |
| Деталь: | CAM KIT |
| Парткод: | 1408134 |
| Деталь: | BTR CAM CLUTCH |
| Парткод: | 2101744 |
| Деталь: | CAM ASSY-M |
| Парткод: | 2061069 |
| Деталь: | BOTTOM PLATE SENSOR |
| Парткод: | 2035743 |
| Деталь: | 2ND BTR GEAR B3 |
| Парткод: | 1214739 |
| Деталь: | EXIT LOWER ASSY |
| Парткод: | 2061099 |
| Деталь: | EXIT UPPER ASSY |
| Парткод: | 1092463 |
| Деталь: | EXIT TRAY ASSY |
| Парткод: | 1153846 |
| Деталь: | EXIT CHUTE FAN |
| Парткод: | 2061075 |
| Деталь: | FUSER FAN-1 |
| Парткод: | 2061076 |
| Деталь: | TOP EXIT SENSOR |
| Парткод: | 2028258 |
| Деталь: | EXIT CHUTE SWITCH |
| Парткод: | 2028259 |
| Деталь: | EXIT HARNESS |
| Парткод: | 2061077 |
| Деталь: | EXIT CHUTE SWITCH |
| Парткод: | 2028259 |
| Деталь: | MSI ASSY |
| Парткод: | 2073319 |
| Деталь: | MSI TRAY ASSY |
| Парткод: | 2073320 |
| Деталь: | MAIN P/H FRAME ASSY |
| Парткод: | 2060890 |
| Деталь: | P/B PAD |
| Парткод: | 1056878 |
| Деталь: | MSI HARNESS ASSY |
| Парткод: | 2035742 |
| Деталь: | GEAR 28 |
| Парткод: | 1056879 |
| Деталь: | BOTTOM PLATE SENSOR |
| Парткод: | 2035743 |
| Деталь: | PAD MSI TRAY |
| Парткод: | 1092014 |
| Деталь: | SHAFT MSI TRAY |
| Парткод: | 1092015 |
| Деталь: | LIFT UP FRAME ASSY |
| Парткод: | 1092020 |
| Деталь: | LIFT MOTOR ASSY |
| Парткод: | 2094003 |
| Деталь: | E.R.M. SENSOR |
| Парткод: | 2021773 |
| Деталь: | SENSOR |
| Парткод: | 2028232 |
| Деталь: | MSI N/P ACTUATOR |
| Парткод: | 1056881 |
| Деталь: | MSI FEED FRAME ASSY |
| Парткод: | 2060893 |
| Деталь: | ROLL |
| Парткод: | 1091882 |
| Деталь: | FEED ROLL |
| Парткод: | 1056884 |
| Деталь: | RTD SPRING |
| Парткод: | 1110059 |
| Деталь: | PICK UP CLUTCH |
| Парткод: | 1092026 |
| Деталь: | GEAR-16 |
| Парткод: | 1092027 |
| Деталь: | RETARD ROLL |
| Парткод: | 1056889 |
| Деталь: | P/REGI ROLL ASSY |
| Парткод: | 1056890 |
| Деталь: | PRE REGI CLUTCH ASSY |
| Парткод: | 2069027 |
| Деталь: | PRE REGI CLUTCH ASSY |
| Парткод: | 2035748 |
| Деталь: | IBT REGI CHUTE |
| Парткод: | 1108618 |
| Деталь: | REGI HARNESS ASSY |
| Парткод: | 2035749 |
| Деталь: | P/H FRONT RAIL-L |
| Парткод: | 1042164 |
| Деталь: | P/H REAR RAIL-L |
| Парткод: | 1092030 |
| Деталь: | P/H FRONT RAIL-S |
| Парткод: | 1042163 |
| Деталь: | P/H REAR RAIL-R |
| Парткод: | 1092032 |
| Деталь: | EXIT CHUTE SWITCH |
| Парткод: | 2028259 |
| Деталь: | MSI ASSY |
| Парткод: | 2073319 |
| Деталь: | MSI TRAY ASSY |
| Парткод: | 2073320 |
| Деталь: | MAIN P/H FRAME ASSY |
| Парткод: | 2060890 |
| Деталь: | P/B PAD |
| Парткод: | 1056878 |
| Деталь: | MSI HARNESS ASSY |
| Парткод: | 2035742 |
| Деталь: | GEAR 28 |
| Парткод: | 1056879 |
| Деталь: | BOTTOM PLATE SENSOR |
| Парткод: | 2035743 |
| Деталь: | PAD MSI TRAY |
| Парткод: | 1092014 |
| Деталь: | SHAFT MSI TRAY |
| Парткод: | 1092015 |
| Деталь: | LIFT UP FRAME ASSY |
| Парткод: | 1092020 |
| Деталь: | LIFT MOTOR ASSY |
| Парткод: | 2094003 |
| Деталь: | E.R.M. SENSOR |
| Парткод: | 2021773 |
| Деталь: | SENSOR |
| Парткод: | 2028232 |
| Деталь: | MSI N/P ACTUATOR |
| Парткод: | 1056881 |
| Деталь: | MSI FEED FRAME ASSY |
| Парткод: | 2060893 |
| Деталь: | ROLL |
| Парткод: | 1091882 |
| Деталь: | FEED ROLL |
| Парткод: | 1056884 |
| Деталь: | RTD SPRING |
| Парткод: | 1110059 |
| Деталь: | PICK UP CLUTCH |
| Парткод: | 1092026 |
| Деталь: | GEAR-16 |
| Парткод: | 1092027 |
| Деталь: | RETARD ROLL |
| Парткод: | 1056889 |
| Деталь: | P/REGI ROLL ASSY |
| Парткод: | 1056890 |
| Деталь: | PRE REGI CLUTCH ASSY |
| Парткод: | 2069027 |
| Деталь: | PRE REGI CLUTCH ASSY |
| Парткод: | 2035748 |
| Деталь: | IBT REGI CHUTE |
| Парткод: | 1108618 |
| Деталь: | REGI HARNESS ASSY |
| Парткод: | 2035749 |
| Деталь: | P/H FRONT RAIL-L |
| Парткод: | 1042164 |
| Деталь: | P/H REAR RAIL-L |
| Парткод: | 1092030 |
| Деталь: | P/H FRONT RAIL-S |
| Парткод: | 1042163 |
| Деталь: | P/H REAR RAIL-R |
| Парткод: | 1092032 |
| Деталь: | LV/HV POWER SUPPLY(230V) |
| Парткод: | 2074204 |
| Деталь: | DEVE.FAN |
| Парткод: | 2061090 |
| Деталь: | DEVE.WIRE |
| Парткод: | 2035792 |
| Деталь: | MAIN HARNESS ASSY |
| Парткод: | 2061091 |
| Деталь: | FUSER CONNECTOR |
| Парткод: | 2061092 |
| Деталь: | POWER CABLE |
| Парткод: | 2029165 |
| Деталь: | POWER CABLE |
| Парткод: | 2029253 |
| Деталь: | POWER CABLE |
| Парткод: | 2037206 |
| Деталь: | MCU PWB-XL |
| Парткод: | 2061094 |
| Деталь: | COMMUNICATION PWB |
| Парткод: | 2061095 |
| Деталь: | FRONT COVER SWITCH R |
| Парткод: | 2061096 |
| Деталь: | FRONT COVER SWITCH L |
| Парткод: | 2035797 |
| Деталь: | ENVIRONMENT SENSOR |
| Парткод: | 2061097 |
| Деталь: | P/H HARNESS ASSY |
| Парткод: | 2061098 |
| Деталь: | ROS HARNESS |
| Парткод: | 2071546 |
| Деталь: | DEVELOPER ASSY Y |
| Парткод: | 1110066 |
| Деталь: | DEVELOPER ASSY M |
| Парткод: | 1110067 |
| Деталь: | DEVELOPER ASSY C |
| Парткод: | 1110068 |
| Деталь: | DEVELOPER ASSY BK |
| Парткод: | 1110069 |
| Деталь: | SHUTTER CTRG |
| Парткод: | 1282648 |
| Деталь: | PKG KIT TR 50X4 |
| Парткод: | 1301684 |
| Деталь: | PKG KIT TR 100X4 |
| Парткод: | 1301685 |
| Деталь: | ROTARY FRAME ASSY |
| Парткод: | 1092037 |
| Деталь: | ROTARY LATCH ASSY |
| Парткод: | 1092038 |
| Деталь: | DEVE.CONTACT PLATE ASSY |
| Парткод: | 1056892 |
| Деталь: | ROTARY SENSOR |
| Парткод: | 1042195 |
| Деталь: | USED CRT.SENSOR |
| Парткод: | 2071548 |
| Деталь: | ROTARY GEAR ASSY |
| Парткод: | 1301681 |
| Деталь: | CONT.CHASSIS ASSY |
| Парткод: | 1092462 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2060476 |
| Деталь: | BOARD ASSY.,I/F |
| Парткод: | 2048955 |
| Деталь: | HARNESS |
| Парткод: | 2056209 |
| Деталь: | SPACER 20 |
| Парткод: | 1092465 |
| Деталь: | BOARD ASSY.,NETWORK |
| Парткод: | 2056302 |
| Деталь: | HARNESS |
| Парткод: | 2056212 |
| Деталь: | HARNESS |
| Парткод: | 2089258 |
| Деталь: | SHIELD CONT OPTION |
| Парткод: | 1063436 |
| Деталь: | GROUNDING SPRING,TYPE-B |
| Парткод: | 1012855 |
| Деталь: | GUIDE RAIL |
| Парткод: | 1012848 |
| Деталь: | CONT.PLATE |
| Парткод: | 1110070 |
| Деталь: | PLATE COVER |
| Парткод: | 1092470 |
| Деталь: | SDRAMDIMM |
| Парткод: | 2091049 |
| Деталь: | BOARD ASSY.,MEMORY |
| Парткод: | 2056412 |
| Деталь: | BOARD ASSY.,MEMORY |
| Парткод: | 2076652 |
| Деталь: | MAIN FUSER ASSY |
| Парткод: | 2105002 |
| Деталь: | FUSER TRAY ASSY |
| Парткод: | 2074202 |
| Деталь: | FUSER EXIT SENSOR |
| Парткод: | 2105004 |
| Деталь: | TEMP SENSOR ASSY |
| Парткод: | 2105005 |
| Деталь: | PRESSURE ROLL |
| Парткод: | 1414381 |
| Деталь: | BEARING |
| Парткод: | 1042206 |
| Деталь: | FUSER INLET PLATE |
| Парткод: | 1413921 |
| Деталь: | LOWER GUIDE ASSY |
| Парткод: | 1413922 |
| Деталь: | FUSER EXIT ACTUATOR |
| Парткод: | 1413923 |
| Деталь: | UPPER GUIDE ASSY |
| Парткод: | 1413924 |
| Деталь: | PINCH ROLL ASSY |
| Парткод: | 1413925 |
| Деталь: | HEAT ROLL |
| Парткод: | 1413920 |
| Деталь: | FUSER UPPER ASSY |
| Парткод: | 1413926 |
| Деталь: | FUSE SEAL |
| Парткод: | 1413927 |
| Деталь: | Q/L SEAL |
| Парткод: | 1413928 |
| Деталь: | FUSER UPPER LABEL |
| Парткод: | 1413929 |
| Деталь: | FUSER FRONT COVER |
| Парткод: | 1413930 |
| Деталь: | FUSER REAR COVER |
| Парткод: | 1413931 |
| Деталь: | H/R IDLER GEAR-1 |
| Парткод: | 1413932 |
| Деталь: | H/R HEATER(230) |
| Парткод: | 2105006 |
| Деталь: | P/R HEATER(230) |
| Парткод: | 2105009 |
| Деталь: | UPPER BUFFLE |
| Парткод: | 1301683 |
| Деталь: | NIP SCREW |
| Парткод: | 1413933 |
| Деталь: | FUSER TRAY LEVER |
| Парткод: | 1092450 |
| Деталь: | FUSER TRAY CAP-B |
| Парткод: | 1109131 |
| Деталь: | FUSER FRONT RAIL |
| Парткод: | 1092451 |
| Деталь: | FUSER REAR RAIL |
| Парткод: | 1092452 |
| Деталь: | EXIT-1 ROLL ASSY |
| Парткод: | 1092453 |
| Деталь: | EXIT-1 GEAR |
| Парткод: | 1288072 |
| Деталь: | EXCHANGE CHUTE |
| Парткод: | 1042217 |
| Деталь: | EXCHANGE BRACKET |
| Парткод: | 1155858 |
| Деталь: | EXCHANGE SOLENOID |
| Парткод: | 2061073 |
| Деталь: | FUSER HARNESS ASSY |
| Парткод: | 2109786 |
| Деталь: | FUSER TRAY CAP-A |
| Парткод: | 1109909 |
| Деталь: | FUSER IN SENSOR |
| Парткод: | 2069024 |
| Деталь: | FUSER IN ACTUATOR |
| Парткод: | 1092454 |
| Деталь: | FUSER IN SPRING |
| Парткод: | 1042227 |
| Деталь: | FUSER CHUTE FAN |
| Парткод: | 2061074 |
| Деталь: | INPUT BRACKET ASSY |
| Парткод: | 1092455 |
| Деталь: | CLEANER CAM GEAR |
| Парткод: | 1056914 |
| Деталь: | INPUT GEAR FT-3 |
| Парткод: | 1092456 |
| Деталь: | INPUT GEAR FT-2 |
| Парткод: | 1092457 |
| Деталь: | INPUT GEAR FT-1 |
| Парткод: | 1092458 |
| Деталь: | CLEANER CAM SOLENOID |
| Парткод: | 2035773 |
| Деталь: | CLEANER CAM ASSY |
| Парткод: | 1092459 |
| Деталь: | FUSER EARTH-C |
| Парткод: | 1092460 |
| Деталь: | 2ND BTR CAM ASSY |
| Парткод: | 2101743 |
| Деталь: | BTR REAR BRACKET ASSY |
| Парткод: | 1092039 |
| Деталь: | AUGER HIGH ASSY |
| Парткод: | 1213010 |
| Деталь: | IBT REAR BRACKET ASSY |
| Парткод: | 1092041 |
| Деталь: | TRANSFER HIGH ASSY |
| Парткод: | 2060903 |
| Деталь: | TENSION LEVER |
| Парткод: | 1056896 |
| Деталь: | 2ND BTR ASSY |
| Парткод: | 2060901 |
| Деталь: | BELT CLEANER ASSY |
| Парткод: | 2060902 |
| Деталь: | IBT BELT ASSY |
| Парткод: | 1056901 |
| Деталь: | TENSION SHAFT SPRINF |
| Парткод: | 1061170 |
| Деталь: | TRO SENSOR |
| Парткод: | 2035763 |
| Деталь: | TRO HARNESS |
| Парткод: | 2040930 |
| Деталь: | KIT TRANSFER MECH |
| Парткод: | 1422658 |
| Деталь: | CAM KIT |
| Парткод: | 1408134 |
| Деталь: | BTR CAM CLUTCH |
| Парткод: | 2101744 |
| Деталь: | CAM ASSY-M |
| Парткод: | 2061069 |
| Деталь: | BOTTOM PLATE SENSOR |
| Парткод: | 2035743 |
| Деталь: | 2ND BTR GEAR B3 |
| Парткод: | 1214739 |
| Деталь: | EXIT LOWER ASSY |
| Парткод: | 2061099 |
| Деталь: | EXIT UPPER ASSY |
| Парткод: | 1092463 |
| Деталь: | EXIT TRAY ASSY |
| Парткод: | 1153846 |
| Деталь: | EXIT CHUTE FAN |
| Парткод: | 2061075 |
| Деталь: | FUSER FAN-1 |
| Парткод: | 2061076 |
| Деталь: | TOP EXIT SENSOR |
| Парткод: | 2028258 |
| Деталь: | EXIT CHUTE SWITCH |
| Парткод: | 2028259 |
| Деталь: | EXIT HARNESS |
| Парткод: | 2061077 |
| Деталь: | TRAY SENSOR HARNESS |
| Парткод: | 2037832 |
| Деталь: | SIZE SWITCH ASSY |
| Парткод: | 1042128 |
| Деталь: | TRAY N/P SENSOR ASSY |
| Парткод: | 2060871 |
| Деталь: | TURN CHUTE UP ASSY |
| Парткод: | 1091890 |
| Деталь: | TURN CHUTE COVER |
| Парткод: | 1056866 |
| Деталь: | LOW PAPER SENSOR |
| Парткод: | 2029259 |
| Деталь: | TURN IN CHUTE |
| Парткод: | 1109129 |
| Деталь: | TURN CHUTE ASSY |
| Парткод: | 1091891 |
| Деталь: | TURN ROLL ASSY |
| Парткод: | 1091892 |
| Деталь: | TURN GEAR 16 |
| Парткод: | 1091893 |
| Деталь: | TURN GEAR 30 |
| Парткод: | 1091894 |
| Деталь: | TURN GEAR M |
| Парткод: | 1056872 |
| Деталь: | TURN GEAR 19D |
| Парткод: | 1092006 |
| Деталь: | FEED ROLL ASSY |
| Парткод: | 1060846 |
| Деталь: | FEED ROLL |
| Парткод: | 1060847 |
| Деталь: | FEED SOLENOID |
| Парткод: | 2060891 |
| Деталь: | FEED GEAR ASSY |
| Парткод: | 1092008 |
| Деталь: | FEED SPRING |
| Парткод: | 1092009 |
| Деталь: | FED IDLER GEAR |
| Парткод: | 1042117 |
| Деталь: | TRAY STOPPER |
| Парткод: | 1042127 |
| Деталь: | TURN CLUTCH |
| Парткод: | 1092010 |
| Деталь: | TURN CHUTE HARNESS |
| Парткод: | 2035740 |
| Деталь: | TURN GEAR COVER |
| Парткод: | 1056876 |
| Деталь: | EXIT CHUTE SWITCH |
| Парткод: | 2028259 |
| Деталь: | MAIN FUSER ASSY |
| Парткод: | 2105002 |
| Деталь: | FUSER TRAY ASSY |
| Парткод: | 2074202 |
| Деталь: | FUSER EXIT SENSOR |
| Парткод: | 2105004 |
| Деталь: | TEMP SENSOR ASSY |
| Парткод: | 2105005 |
| Деталь: | PRESSURE ROLL |
| Парткод: | 1414381 |
| Деталь: | BEARING |
| Парткод: | 1042206 |
| Деталь: | FUSER INLET PLATE |
| Парткод: | 1413921 |
| Деталь: | LOWER GUIDE ASSY |
| Парткод: | 1413922 |
| Деталь: | FUSER EXIT ACTUATOR |
| Парткод: | 1413923 |
| Деталь: | UPPER GUIDE ASSY |
| Парткод: | 1413924 |
| Деталь: | PINCH ROLL ASSY |
| Парткод: | 1413925 |
| Деталь: | HEAT ROLL |
| Парткод: | 1413920 |
| Деталь: | FUSER UPPER ASSY |
| Парткод: | 1413926 |
| Деталь: | FUSE SEAL |
| Парткод: | 1413927 |
| Деталь: | Q/L SEAL |
| Парткод: | 1413928 |
| Деталь: | FUSER UPPER LABEL |
| Парткод: | 1413929 |
| Деталь: | FUSER FRONT COVER |
| Парткод: | 1413930 |
| Деталь: | FUSER REAR COVER |
| Парткод: | 1413931 |
| Деталь: | H/R IDLER GEAR-1 |
| Парткод: | 1413932 |
| Деталь: | H/R HEATER(230) |
| Парткод: | 2105006 |
| Деталь: | P/R HEATER(230) |
| Парткод: | 2105009 |
| Деталь: | UPPER BUFFLE |
| Парткод: | 1301683 |
| Деталь: | NIP SCREW |
| Парткод: | 1413933 |
| Деталь: | FUSER TRAY LEVER |
| Парткод: | 1092450 |
| Деталь: | FUSER TRAY CAP-B |
| Парткод: | 1109131 |
| Деталь: | FUSER FRONT RAIL |
| Парткод: | 1092451 |
| Деталь: | FUSER REAR RAIL |
| Парткод: | 1092452 |
| Деталь: | EXIT-1 ROLL ASSY |
| Парткод: | 1092453 |
| Деталь: | EXIT-1 GEAR |
| Парткод: | 1288072 |
| Деталь: | EXCHANGE CHUTE |
| Парткод: | 1042217 |
| Деталь: | EXCHANGE BRACKET |
| Парткод: | 1155858 |
| Деталь: | EXCHANGE SOLENOID |
| Парткод: | 2061073 |
| Деталь: | FUSER HARNESS ASSY |
| Парткод: | 2109786 |
| Деталь: | FUSER TRAY CAP-A |
| Парткод: | 1109909 |
| Деталь: | FUSER IN SENSOR |
| Парткод: | 2069024 |
| Деталь: | FUSER IN ACTUATOR |
| Парткод: | 1092454 |
| Деталь: | FUSER IN SPRING |
| Парткод: | 1042227 |
| Деталь: | FUSER CHUTE FAN |
| Парткод: | 2061074 |
| Деталь: | INPUT BRACKET ASSY |
| Парткод: | 1092455 |
| Деталь: | CLEANER CAM GEAR |
| Парткод: | 1056914 |
| Деталь: | INPUT GEAR FT-3 |
| Парткод: | 1092456 |
| Деталь: | INPUT GEAR FT-2 |
| Парткод: | 1092457 |
| Деталь: | INPUT GEAR FT-1 |
| Парткод: | 1092458 |
| Деталь: | CLEANER CAM SOLENOID |
| Парткод: | 2035773 |
| Деталь: | CLEANER CAM ASSY |
| Парткод: | 1092459 |
| Деталь: | FUSER EARTH-C |
| Парткод: | 1092460 |
| Деталь: | 2ND BTR CAM ASSY |
| Парткод: | 2101743 |
| Деталь: | BTR REAR BRACKET ASSY |
| Парткод: | 1092039 |
| Деталь: | AUGER HIGH ASSY |
| Парткод: | 1213010 |
| Деталь: | IBT REAR BRACKET ASSY |
| Парткод: | 1092041 |
| Деталь: | TRANSFER HIGH ASSY |
| Парткод: | 2060903 |
| Деталь: | TENSION LEVER |
| Парткод: | 1056896 |
| Деталь: | 2ND BTR ASSY |
| Парткод: | 2060901 |
| Деталь: | BELT CLEANER ASSY |
| Парткод: | 2060902 |
| Деталь: | IBT BELT ASSY |
| Парткод: | 1056901 |
| Деталь: | TENSION SHAFT SPRINF |
| Парткод: | 1061170 |
| Деталь: | TRO SENSOR |
| Парткод: | 2035763 |
| Деталь: | TRO HARNESS |
| Парткод: | 2040930 |
| Деталь: | KIT TRANSFER MECH |
| Парткод: | 1422658 |
| Деталь: | CAM KIT |
| Парткод: | 1408134 |
| Деталь: | BTR CAM CLUTCH |
| Парткод: | 2101744 |
| Деталь: | CAM ASSY-M |
| Парткод: | 2061069 |
| Деталь: | BOTTOM PLATE SENSOR |
| Парткод: | 2035743 |
| Деталь: | 2ND BTR GEAR B3 |
| Парткод: | 1214739 |
| Деталь: | ROS ASSY |
| Парткод: | 2060895 |
| Деталь: | ADC SENSOR ASSY |
| Парткод: | 2060896 |
| Деталь: | ERASE LAMP ASSY |
| Парткод: | 2060897 |
| Деталь: | BCR WIRE ASSY |
| Парткод: | 2060898 |
| Деталь: | WASTE TONER SENSOR |
| Парткод: | 2028242 |
| Деталь: | TONER BOX SENSOR |
| Парткод: | 2028243 |
| Деталь: | TONER BOX HARNESS |
| Парткод: | 2028244 |
| Деталь: | BCR CONNECTOR ASSY |
| Парткод: | 1042187 |
| Деталь: | RECEPTACLE ASSY |
| Парткод: | 2060899 |
| Деталь: | CRUM CONNECTOR ASSY |
| Парткод: | 2028245 |
| Деталь: | FRONT COVER ASSY |
| Парткод: | 1110060 |
| Деталь: | HINGE PLATE |
| Парткод: | 1042089 |
| Деталь: | FRONT LOWER COVER |
| Парткод: | 1091869 |
| Деталь: | FRONT MID COVER |
| Парткод: | 1091870 |
| Деталь: | L/H INNER COVER ASSY |
| Парткод: | 1110061 |
| Деталь: | ROTARY LATCH LEVER |
| Парткод: | 1155857 |
| Деталь: | ROTARY LATCH SPRING |
| Парткод: | 1042093 |
| Деталь: | TINNER COVER ASSY |
| Парткод: | 1091872 |
| Деталь: | R/H INNER COVER ASSY |
| Парткод: | 1110062 |
| Деталь: | TOP COVER ASSY |
| Парткод: | 1114120 |
| Деталь: | REAR COVER ASSY |
| Парткод: | 1091875 |
| Деталь: | FILTER ASSY |
| Парткод: | 1091876 |
| Деталь: | REAR O/H COVER |
| Парткод: | 1091877 |
| Деталь: | LEFT LOWER COVER |
| Парткод: | 1091878 |
| Деталь: | LEFT O/H COVER |
| Парткод: | 1091879 |
| Деталь: | RIGHT LOWER COVER |
| Парткод: | 1091880 |
| Деталь: | RIGHT COVER ASSY |
| Парткод: | 1091881 |
| Деталь: | PANEL |
| Парткод: | 2056210 |
| Деталь: | LOGO PLATE,1354, B |
| Парткод: | 1084870 |
| Деталь: | LV/HV POWER SUPPLY(230V) |
| Парткод: | 2074204 |
| Деталь: | DEVE.FAN |
| Парткод: | 2061090 |
| Деталь: | DEVE.WIRE |
| Парткод: | 2035792 |
| Деталь: | MAIN HARNESS ASSY |
| Парткод: | 2061091 |
| Деталь: | FUSER CONNECTOR |
| Парткод: | 2061092 |
| Деталь: | POWER CABLE |
| Парткод: | 2029165 |
| Деталь: | POWER CABLE |
| Парткод: | 2029253 |
| Деталь: | POWER CABLE |
| Парткод: | 2037206 |
| Деталь: | MCU PWB-XL |
| Парткод: | 2061094 |
| Деталь: | COMMUNICATION PWB |
| Парткод: | 2061095 |
| Деталь: | FRONT COVER SWITCH R |
| Парткод: | 2061096 |
| Деталь: | FRONT COVER SWITCH L |
| Парткод: | 2035797 |
| Деталь: | ENVIRONMENT SENSOR |
| Парткод: | 2061097 |
| Деталь: | P/H HARNESS ASSY |
| Парткод: | 2061098 |
| Деталь: | ROS HARNESS |
| Парткод: | 2071546 |
| Деталь: | EXIT CHUTE SWITCH |
| Парткод: | 2028259 |
| Деталь: | MSI ASSY |
| Парткод: | 2073319 |
| Деталь: | MSI TRAY ASSY |
| Парткод: | 2073320 |
| Деталь: | MAIN P/H FRAME ASSY |
| Парткод: | 2060890 |
| Деталь: | P/B PAD |
| Парткод: | 1056878 |
| Деталь: | MSI HARNESS ASSY |
| Парткод: | 2035742 |
| Деталь: | GEAR 28 |
| Парткод: | 1056879 |
| Деталь: | BOTTOM PLATE SENSOR |
| Парткод: | 2035743 |
| Деталь: | PAD MSI TRAY |
| Парткод: | 1092014 |
| Деталь: | SHAFT MSI TRAY |
| Парткод: | 1092015 |
| Деталь: | LIFT UP FRAME ASSY |
| Парткод: | 1092020 |
| Деталь: | LIFT MOTOR ASSY |
| Парткод: | 2094003 |
| Деталь: | E.R.M. SENSOR |
| Парткод: | 2021773 |
| Деталь: | SENSOR |
| Парткод: | 2028232 |
| Деталь: | MSI N/P ACTUATOR |
| Парткод: | 1056881 |
| Деталь: | MSI FEED FRAME ASSY |
| Парткод: | 2060893 |
| Деталь: | ROLL |
| Парткод: | 1091882 |
| Деталь: | FEED ROLL |
| Парткод: | 1056884 |
| Деталь: | RTD SPRING |
| Парткод: | 1110059 |
| Деталь: | PICK UP CLUTCH |
| Парткод: | 1092026 |
| Деталь: | GEAR-16 |
| Парткод: | 1092027 |
| Деталь: | RETARD ROLL |
| Парткод: | 1056889 |
| Деталь: | P/REGI ROLL ASSY |
| Парткод: | 1056890 |
| Деталь: | PRE REGI CLUTCH ASSY |
| Парткод: | 2069027 |
| Деталь: | PRE REGI CLUTCH ASSY |
| Парткод: | 2035748 |
| Деталь: | IBT REGI CHUTE |
| Парткод: | 1108618 |
| Деталь: | REGI HARNESS ASSY |
| Парткод: | 2035749 |
| Деталь: | P/H FRONT RAIL-L |
| Парткод: | 1042164 |
| Деталь: | P/H REAR RAIL-L |
| Парткод: | 1092030 |
| Деталь: | P/H FRONT RAIL-S |
| Парткод: | 1042163 |
| Деталь: | P/H REAR RAIL-R |
| Парткод: | 1092032 |
| Деталь: | MAIN FUSER ASSY |
| Парткод: | 2105002 |
| Деталь: | FUSER TRAY ASSY |
| Парткод: | 2074202 |
| Деталь: | FUSER EXIT SENSOR |
| Парткод: | 2105004 |
| Деталь: | TEMP SENSOR ASSY |
| Парткод: | 2105005 |
| Деталь: | PRESSURE ROLL |
| Парткод: | 1414381 |
| Деталь: | BEARING |
| Парткод: | 1042206 |
| Деталь: | FUSER INLET PLATE |
| Парткод: | 1413921 |
| Деталь: | LOWER GUIDE ASSY |
| Парткод: | 1413922 |
| Деталь: | FUSER EXIT ACTUATOR |
| Парткод: | 1413923 |
| Деталь: | UPPER GUIDE ASSY |
| Парткод: | 1413924 |
| Деталь: | PINCH ROLL ASSY |
| Парткод: | 1413925 |
| Деталь: | HEAT ROLL |
| Парткод: | 1413920 |
| Деталь: | FUSER UPPER ASSY |
| Парткод: | 1413926 |
| Деталь: | FUSE SEAL |
| Парткод: | 1413927 |
| Деталь: | Q/L SEAL |
| Парткод: | 1413928 |
| Деталь: | FUSER UPPER LABEL |
| Парткод: | 1413929 |
| Деталь: | FUSER FRONT COVER |
| Парткод: | 1413930 |
| Деталь: | FUSER REAR COVER |
| Парткод: | 1413931 |
| Деталь: | H/R IDLER GEAR-1 |
| Парткод: | 1413932 |
| Деталь: | H/R HEATER(230) |
| Парткод: | 2105006 |
| Деталь: | P/R HEATER(230) |
| Парткод: | 2105009 |
| Деталь: | UPPER BUFFLE |
| Парткод: | 1301683 |
| Деталь: | NIP SCREW |
| Парткод: | 1413933 |
| Деталь: | FUSER TRAY LEVER |
| Парткод: | 1092450 |
| Деталь: | FUSER TRAY CAP-B |
| Парткод: | 1109131 |
| Деталь: | FUSER FRONT RAIL |
| Парткод: | 1092451 |
| Деталь: | FUSER REAR RAIL |
| Парткод: | 1092452 |
| Деталь: | EXIT-1 ROLL ASSY |
| Парткод: | 1092453 |
| Деталь: | EXIT-1 GEAR |
| Парткод: | 1288072 |
| Деталь: | EXCHANGE CHUTE |
| Парткод: | 1042217 |
| Деталь: | EXCHANGE BRACKET |
| Парткод: | 1155858 |
| Деталь: | EXCHANGE SOLENOID |
| Парткод: | 2061073 |
| Деталь: | FUSER HARNESS ASSY |
| Парткод: | 2109786 |
| Деталь: | FUSER TRAY CAP-A |
| Парткод: | 1109909 |
| Деталь: | FUSER IN SENSOR |
| Парткод: | 2069024 |
| Деталь: | FUSER IN ACTUATOR |
| Парткод: | 1092454 |
| Деталь: | FUSER IN SPRING |
| Парткод: | 1042227 |
| Деталь: | FUSER CHUTE FAN |
| Парткод: | 2061074 |
| Деталь: | INPUT BRACKET ASSY |
| Парткод: | 1092455 |
| Деталь: | CLEANER CAM GEAR |
| Парткод: | 1056914 |
| Деталь: | INPUT GEAR FT-3 |
| Парткод: | 1092456 |
| Деталь: | INPUT GEAR FT-2 |
| Парткод: | 1092457 |
| Деталь: | INPUT GEAR FT-1 |
| Парткод: | 1092458 |
| Деталь: | CLEANER CAM SOLENOID |
| Парткод: | 2035773 |
| Деталь: | CLEANER CAM ASSY |
| Парткод: | 1092459 |
| Деталь: | FUSER EARTH-C |
| Парткод: | 1092460 |
| Деталь: | EXIT CHUTE SWITCH |
| Парткод: | 2028259 |
| Деталь: | MSI ASSY |
| Парткод: | 2073319 |
| Деталь: | MSI TRAY ASSY |
| Парткод: | 2073320 |
| Деталь: | MAIN P/H FRAME ASSY |
| Парткод: | 2060890 |
| Деталь: | P/B PAD |
| Парткод: | 1056878 |
| Деталь: | MSI HARNESS ASSY |
| Парткод: | 2035742 |
| Деталь: | GEAR 28 |
| Парткод: | 1056879 |
| Деталь: | BOTTOM PLATE SENSOR |
| Парткод: | 2035743 |
| Деталь: | PAD MSI TRAY |
| Парткод: | 1092014 |
| Деталь: | SHAFT MSI TRAY |
| Парткод: | 1092015 |
| Деталь: | LIFT UP FRAME ASSY |
| Парткод: | 1092020 |
| Деталь: | LIFT MOTOR ASSY |
| Парткод: | 2094003 |
| Деталь: | E.R.M. SENSOR |
| Парткод: | 2021773 |
| Деталь: | SENSOR |
| Парткод: | 2028232 |
| Деталь: | MSI N/P ACTUATOR |
| Парткод: | 1056881 |
| Деталь: | MSI FEED FRAME ASSY |
| Парткод: | 2060893 |
| Деталь: | ROLL |
| Парткод: | 1091882 |
| Деталь: | FEED ROLL |
| Парткод: | 1056884 |
| Деталь: | RTD SPRING |
| Парткод: | 1110059 |
| Деталь: | PICK UP CLUTCH |
| Парткод: | 1092026 |
| Деталь: | GEAR-16 |
| Парткод: | 1092027 |
| Деталь: | RETARD ROLL |
| Парткод: | 1056889 |
| Деталь: | P/REGI ROLL ASSY |
| Парткод: | 1056890 |
| Деталь: | PRE REGI CLUTCH ASSY |
| Парткод: | 2069027 |
| Деталь: | PRE REGI CLUTCH ASSY |
| Парткод: | 2035748 |
| Деталь: | IBT REGI CHUTE |
| Парткод: | 1108618 |
| Деталь: | REGI HARNESS ASSY |
| Парткод: | 2035749 |
| Деталь: | P/H FRONT RAIL-L |
| Парткод: | 1042164 |
| Деталь: | P/H REAR RAIL-L |
| Парткод: | 1092030 |
| Деталь: | P/H FRONT RAIL-S |
| Парткод: | 1042163 |
| Деталь: | P/H REAR RAIL-R |
| Парткод: | 1092032 |
| Деталь: | MAIN FUSER ASSY |
| Парткод: | 2105002 |
| Деталь: | FUSER TRAY ASSY |
| Парткод: | 2074202 |
| Деталь: | FUSER EXIT SENSOR |
| Парткод: | 2105004 |
| Деталь: | TEMP SENSOR ASSY |
| Парткод: | 2105005 |
| Деталь: | PRESSURE ROLL |
| Парткод: | 1414381 |
| Деталь: | BEARING |
| Парткод: | 1042206 |
| Деталь: | FUSER INLET PLATE |
| Парткод: | 1413921 |
| Деталь: | LOWER GUIDE ASSY |
| Парткод: | 1413922 |
| Деталь: | FUSER EXIT ACTUATOR |
| Парткод: | 1413923 |
| Деталь: | UPPER GUIDE ASSY |
| Парткод: | 1413924 |
| Деталь: | PINCH ROLL ASSY |
| Парткод: | 1413925 |
| Деталь: | HEAT ROLL |
| Парткод: | 1413920 |
| Деталь: | FUSER UPPER ASSY |
| Парткод: | 1413926 |
| Деталь: | FUSE SEAL |
| Парткод: | 1413927 |
| Деталь: | Q/L SEAL |
| Парткод: | 1413928 |
| Деталь: | FUSER UPPER LABEL |
| Парткод: | 1413929 |
| Деталь: | FUSER FRONT COVER |
| Парткод: | 1413930 |
| Деталь: | FUSER REAR COVER |
| Парткод: | 1413931 |
| Деталь: | H/R IDLER GEAR-1 |
| Парткод: | 1413932 |
| Деталь: | H/R HEATER(230) |
| Парткод: | 2105006 |
| Деталь: | P/R HEATER(230) |
| Парткод: | 2105009 |
| Деталь: | UPPER BUFFLE |
| Парткод: | 1301683 |
| Деталь: | NIP SCREW |
| Парткод: | 1413933 |
| Деталь: | FUSER TRAY LEVER |
| Парткод: | 1092450 |
| Деталь: | FUSER TRAY CAP-B |
| Парткод: | 1109131 |
| Деталь: | FUSER FRONT RAIL |
| Парткод: | 1092451 |
| Деталь: | FUSER REAR RAIL |
| Парткод: | 1092452 |
| Деталь: | EXIT-1 ROLL ASSY |
| Парткод: | 1092453 |
| Деталь: | EXIT-1 GEAR |
| Парткод: | 1288072 |
| Деталь: | EXCHANGE CHUTE |
| Парткод: | 1042217 |
| Деталь: | EXCHANGE BRACKET |
| Парткод: | 1155858 |
| Деталь: | EXCHANGE SOLENOID |
| Парткод: | 2061073 |
| Деталь: | FUSER HARNESS ASSY |
| Парткод: | 2109786 |
| Деталь: | FUSER TRAY CAP-A |
| Парткод: | 1109909 |
| Деталь: | FUSER IN SENSOR |
| Парткод: | 2069024 |
| Деталь: | FUSER IN ACTUATOR |
| Парткод: | 1092454 |
| Деталь: | FUSER IN SPRING |
| Парткод: | 1042227 |
| Деталь: | FUSER CHUTE FAN |
| Парткод: | 2061074 |
| Деталь: | INPUT BRACKET ASSY |
| Парткод: | 1092455 |
| Деталь: | CLEANER CAM GEAR |
| Парткод: | 1056914 |
| Деталь: | INPUT GEAR FT-3 |
| Парткод: | 1092456 |
| Деталь: | INPUT GEAR FT-2 |
| Парткод: | 1092457 |
| Деталь: | INPUT GEAR FT-1 |
| Парткод: | 1092458 |
| Деталь: | CLEANER CAM SOLENOID |
| Парткод: | 2035773 |
| Деталь: | CLEANER CAM ASSY |
| Парткод: | 1092459 |
| Деталь: | FUSER EARTH-C |
| Парткод: | 1092460 |
| Деталь: | P/H DRIVE ASSY |
| Парткод: | 1092464 |
| Деталь: | PRO DRIVE GEAR ASSY |
| Парткод: | 2061078 |
| Деталь: | FUSER MOTOR ASSY |
| Парткод: | 2061079 |
| Деталь: | P/H MOTOR ASSY |
| Парткод: | 2061080 |
| Деталь: | PRO MOTOR ASSY |
| Парткод: | 2061082 |
| Деталь: | P/R MOT&DRV ASSY |
| Парткод: | 2061084 |
| Деталь: | ROTARY MOTOR ASSY |
| Парткод: | 2061085 |
| Деталь: | ROTARY MOTOR DRIVE PWB |
| Парткод: | 2061086 |
| Деталь: | DISPENSE MOTOR ASSY |
| Парткод: | 2061087 |
| Деталь: | DEVE.GEAR CLUTCH ASSY |
| Парткод: | 2061088 |
Коды ошибок
0017 ... 0309
0800
0998
0999
1002
1010
1020, 1021
1100, 1101
1120 ... 1123
113
1180 ... 1185
1200, 1210
1400
1500
1550
1600
1999
2000
510
511
512
513
516
517
520
521
523
524
525
526
527
530
531
532
533
534
535
536
537
543
544
545
546
547
620
621
622
623
624
626
627
830
831
832
833
998
Описание
| Error code: | 0017 ... 0309 |
| Description: | 0017 CPU error (Undefined interrupt occurrence) 0081 CPU error (TLB correction exception) *Only AcuLaser C7000 0082 CPU error (TLB miss exception [Load/Fetch]) *Only AcuLaser C7000 0083 CPU error (TLB miss exception [Store]) *Only AcuLaser C7000 0084 CPU error (Address error exception [Load/ Fetch]) *Only AcuLaser C7000 0085 CPU error (Address error exception [Store]) *Only AcuLaser C7000 0086 CPU error (Bus error exception [Fetch]) *Only AcuLaser C7000 0087 CPU error (Bus error exception [Load/Store]) *Only AcuLaser C7000 0088 CPU error (SYSCALL exception) 0089 CPU error (Break exception) 0090 CPU error (Reserve command exception) *Only AcuLaser C7000 0091 CPU error (Unused coprocessor exception) 0092 CPU error (FPU exception) *Only AcuLaser C7000 0093 CPU error (TLB exception) *Only AcuLaser C7000 0094 CPU error (XTLB exception) *Only AcuLaser C7000 0095 CPU error (Cache exception) *Only AcuLaser C7000 0096 CPU error (Trap exception) *Only AcuLaser C7000 0097 CPU Error (FPU exception) *Only AcuLaser C7000 0098 CPU error (Watch exception) *Only AcuLaser C7000 0128 ~ 0254 CPU error (Undefined trap) *Only AcuLaser C7000 0255 CPU error (NMI exception) *Only AcuLaser C7000 0256 CPU error (Divide by 0) *Only AcuLaser C7000 0257 CPU error (Computation overflow) *Only AcuLaser C7000 0258 CPU error (Break was generated) *Only AcuLaser C7000 0300 CPU error (Reserved (undefined) exception) *Only AcuLaser C8600 0301 CPU error (Machine check exception) *Only AcuLaser C8600 0302 CPU error (Data access exception) *Only AcuLaser C8600 0303 CPU error (Instruction access exception) *Only AcuLaser C8600 0304 CPU error (Alignment exception) *Only AcuLaser C8600 0305 CPU error *Only AcuLaser C8600 0306 CPU error (Trace exception) *Only AcuLaser C8600 0307 CPU error *Only AcuLaser C8600 0308 CPU error (System administration interrupt exception) *Only AcuLaser C8600 0309 CPU error (Temperature management interrupt exception) *Only AcuLaser C8600 |
| Remedy: | 1 • Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. • Reinsert the DIMM. Replace or reinstall the relevant part. Go to step 2 2 • Improving the CONTROLLER PWB Environment: • Update the program to the latest one in the DIMM.ÅB Replace or reinstall the relevant part. Go to step 3 3 • Replacing the CONTROLLER PWB and Performing Checks: Does the problem still occur after replacing the MCU PWB with a normal one? - Problem solved |
| Error code: | 0800 |
| Display: | Print Unable 08 Turn the power off and then back on again. |
| Description: | Image processing error JAM010X is detected twice. |
| Causes: | Defective main PWB. |
| Remedy: | Main PWB Replace the main PWB. |
| Error code: | 0998 |
| Description: | Engine communication error (Only when powering on) |
| Remedy: | 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: COMMUNICATION PWB,MCU PWB Replace or reinstall the relevant part. Go to step 2 2 Does the error occur when the power is turned ON? Go to step 3 Go to the relevant FIP when other errors/status codes occur. 3 Does the error occur when MCU PWB is replaced and the power is turned ON again? Go to FIP-2.33 “Noise” Problem solved |
| Error code: | 0999 |
| Description: | No Engine Flash ROM program data |
| Remedy: | 1 • Initial checking: Is there any parts of wrong specifications used, improper mounting, damage, distortion, dirt, or adherence of foreign matter? • Major parts to be checked: COMMUNICATION PWB,MCU PWB Replace or reinstall the relevant part. Go to step 2 2 Does the error occur when the power is turned ON? Go to step 3 Go to the relevant FIP when other errors/status codes occur. 3 Does the error occur when MCU PWB is replaced and the power is turned ON again? Go to FIP-2.33 “Noise” Problem solved |
| Error code: | 1002 |
| Description: | Standard RAM error (When the standard size is not determined, etc.) |
| Remedy: | 1 • Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. Replace or reinstall the relevant part. Go to step 2 2 • Checking the SD-RAM: • Remove all SD-RAMs from the RAM slots and then reinsert them in the RAM slots. Be sure to insert the SD-RAMs one by one (S0 and S1) in order so that the SD-RAM error can be identified. Every time you insert an SD-RAM, follow the procedures below and repeat it for each one. 1 Turn the power off. 2 Add the SD-RAM 3 Turn the power on. • Insert the SD-RAM in the socket until it is locked securely. NOTE: Since the SD-RAM has the right direction to insert, be sure to insert it in the correct direction. Replace or reinstall the relevant part. Problem solved |
| Error code: | 1010 |
| Display: | Problem with Printhead L/R Chk printing results |
| Description: | Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s. This error is detected 4 times successively. |
| Causes: | Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective lift motor 1. Defective engine PWB. |
| Remedy: | Cassette lift base elevating mechanism Check that the cassette base can be manipulated smoothly, if not, repair or replace. Lift motor 1 1. Check that the cassette base has been ascended. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift motor 1 and Feed PWB 2 (YC3) Feed PWB 2 (YC1) and Engine PWB (YC4) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the lift motor 1. Lift sensor 1 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift sensor 1 and Feed PWB 2 (YC8) Feed PWB 2 (YC1) and Engine PWB (YC4) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the lift sensor1. Feed PWB 2 Replace the Feed PWB 2. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 1020, 1021 |
| Description: | 1020 RAM error (Slot 0) 1021 RAM error (Slot 1) |
| Remedy: | 1 • Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. Replace or reinstall the relevant part. Go to step 2 2 • Checking the SD-RAM: • Remove all SD-RAMs from the RAM slots and then reinsert them in the RAM slots. Be sure to insert the SD-RAMs one by one (S0 and S1) in order so that the SD-RAM error can be identified. Every time you insert an SD-RAM, follow the procedures below and repeat it for each one. 1 Turn the power off. 2 Add the SD-RAM 3 Turn the power on. • Insert the SD-RAM in the socket until it is locked securely. NOTE: Since the SD-RAM has the right direction to insert, be sure to insert it in the correct direction. Replace or reinstall the relevant part. Problem solved |
| Error code: | 1100, 1101 |
| Description: | 1100 ROM checksum error (bit 0 ~ 15) (Font) 1101 ROM checksum error (bit 16 ~ 31) (Font) |
| Remedy: | 1 • Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. Replace or reinstall the relevant part. Go to step 2 2 • Replace the CODE ROM (C309PROG). • Replace the mounted CODE ROM with another one for checking. Replace the CONTROLLER PWB. Go to step 3 3 • Replace the IC concerned. • “Error C1100” ...Replace IC1 (M160B76JA) • “Error C1101”..Replace.IC2(M160B77JA) Replace or reinstall the relevant part. Problem solved |
| Error code: | 1120 ... 1123 |
| Description: | 1120 ROM checksum error (bit 0 ~ 7) 1121 ROM checksum error (bit 8 ~ 15) 1122 ROM checksum error (bit 16 ~ 23) 1123 ROM checksum error (bit 24 ~ 31) |
| Remedy: | 1 • Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. Replace or reinstall the relevant part. Go to step 2 2 • CODE ROM(C309PROG)ÇÃåšä² • Replace the mounted CODE ROM with another one for checking. Replace the CONTROLLER PWB. Go to step 3 3 • Clearing/updating the Program: • Clear the installed DIMM forcibly and update the program to the latest one in the DIMM. • Clear the new DIMM forcibly and update the program in the DIMM. Replace or reinstall the relevant part. Problem solved |
| Error code: | 113 |
| Display: | SVC 113 ERROR |
| Description: | Finisher Stapler Failure, Code 113 The staple home sensor doesn’t turn ON within 2 seconds after the stapler motor started to turn backwards. |
| Causes: | • Finisher Control Board • Staple Unit Assembly |
| Remedy: | 1 1. Enter service diagnostics. 2. Run the Stapler Home sensor test. 3. Does the value change from H to L when the stapler is moved away from the home position? Go to step 6. Go to step 2. 2 1. Measure the voltage between finisher board connector P852-2 and frame ground. 2. Does the voltage change between 0 and +5 VDC when the sensor is blocked and unblocked? Replace the finisher control board. Go to step 3. 3 1. Measure the voltage at the Finisher Board connector P852-1. 2. Dose the voltage measure +5 VDC? The home sensor or the wiring is bad. Replace the staple unit assembly. Go to step 4. 4 1. Disconnect the Stapler Unit Assembly. 2. Measure the voltage between the finisher board connector P852-1 and frame ground. 3. Does the voltage measure +5 VDC? Replace the stapler unit assembly. Go to step 5. 5 Is +24 VDC present at either J847-7 or J847-9? Replace the finisher control board. Troubleshoot and repair the +24 VDC interlock circuit. 6 1. Enter service diagnostics and run the “Stapler Close Motor” test. 2. Does the stapler motor operate correctly? Replace the finisher control board. Go to step 7. 7 With the Stapler Close Motor test running is +24 VDC present at J847-7? Replace in the following order: • stapler head assembly • finisher control board Troubleshoot and repair the +24 VDC interlock circuit. |
| Error code: | 1180 ... 1185 |
| Description: | 1180 Optional ROM module A checksum error *Only AcuLaser C8600 1181 Optional ROM module B checksum error *Only AcuLaser C8600 1185 Unsupported ROM module *Only AcuLaser C8600 |
| Remedy: | 1 • Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. Replace or reinstall the relevant part. Go to step 2 2 • Checking the DIMM: • Insert the DIMM in the socket until it is locked securely. NOTE: Since the DIMM has the right direction and location for insertion, be sure to insert it in the correct direction and location. • Check if the DIMM is available for this printer, AcuLaser C8600. In cases other than above, replace the CONTROLLER PWB. Replace or reinstall the relevant part. Problem solved |
| Error code: | 1200, 1210 |
| Description: | 1200 EEPROM write error 1210 EEPROM write count limit |
| Remedy: | 1 • Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. Replace or reinstall the relevant part. Go to step 2 2 • Checking the EEPROM: • “Error C1200”... Execute “SelecType Init” in the Panel Setting, or replace EEPROM. • “Error C1210”...Replace EEPROM. In cases other than above, replace the CONTROLLER PWB. Replace or reinstall the relevant part. Problem solved |
| Error code: | 1400 |
| Display: | Condensation Leave switched ON. Fully open the Front Cover. Wait 30 minutes, switch OFF and close cover, then switch ON. |
| Description: | Rotary guide motor error The guide sensor is not detected to be on at the home position detection with the rotary guide for three times in a row. |
| Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective BR guide motor. Defective BR main PWB. Defective engine PWB. |
| Remedy: | Rotary guide motor 1. Check the rotary guide and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Rotary guide motor and BR PWB (YC5) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the rotary guide motor. BR PWB Replace the BR PWB. |
| Error code: | 1500 |
| Display: | Print Unable 15 Turn the power off and then back on again. |
| Description: | PF heater 1 high temperature error (paper feeder 1) A temperature higher than 75C/167F is detected. |
| Causes: | Defective connector cable or poor contact in the connector. Shorted PF thermistor 1. Defective PF fan motor 1. Defective PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF fan motor 1 and PF main PWB (YC111) Shorted PF thermistor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF fan motor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1550 |
| Description: | PF heater 2 high temperature error (paper feeder 3) A temperature higher than 75C/167F is detected. |
| Causes: | Defective connector cable or poor contact in the connector. Shorted PF thermistor 2. Defective PF fan motor 2. Defective PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF fan motor 2 and PF main PWB (YC111) Shorted PF thermistor 2. Replace the side heater unit (Refer to the service manual for the paper feeder). Defective PF fan motor 2. Replace the side heater unit (Refer to the service manual for the paper feeder). Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1600 |
| Description: | PF heater 1 low temperature error (paper feeder 1) An external temperature higher than + 5C/+ 9F is not detected when one minute elapses after PF heater 1 is turned on. |
| Causes: | Defective connector cable or poor contact in the connector. PF thermistor 1 installed incorrectly. Defective PF thermistor 1. Broken PF heater 1. Defective PF heater PWB or PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF heater 1 and PF heater PWB (YC1) PF heater PWB (YC3) and PF main PWB (YC113) PF thermistor 1 and PF main PWB (YC114) PF thermistor 1 installed incorrectly. Check the installation of the PF thermistor 1. Defective PF thermistor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Broken PF heater 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF heater PWB or PF main PWB. Replace the PF heater PWB or PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1999 |
| Description: | Other hardware error |
| Remedy: | 1 • Initial setting: • Remove all the optional units and modules related to the electrical system and bring the printer back to the standard status. • Check if all connectors are properly connected to the CONTROLLER PWB. Replace or reinstall the relevant part. Go to step 2 2 • Initializing the MCU PWB: • By using the DIAG command, execute “Slave Initialize”. Turn the power off once and on again. Does the printer operate normally? Problem solved Go to step 3 3 • Replacing the relevant unit: • Replace the CONTROLLER PWB. Replace or reinstall the relevant part. Problem solved |
| Error code: | 2000 |
| Description: | DDA Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 510 |
| Display: | SYSTEM HALT (*) 510 : X ORGIN |
| Description: | Replace green developer |
| Causes: | • Tray lift motor defective or connector disconnected • Lift sensor defective or disconnected • Pick-up solenoid defective or disconnected • Paper end sensor defective |
| Remedy: | 1. Check the harness connection or replace it. 2. Replace the bypass tray lift motor. 3. Replace the bypass upper limit sensor. 4. Replace the bypass lower limit sensor. 5. Check or clear obstacles around the bypass pick-up solenoid. |
| Error code: | 511 |
| Display: | SYSTEM HALT (*) 511 : Z ORGIN |
| Description: | A3 LCT exit roller contact motor 1 error. One of the following conditions is detected in the A3 LCT. • The LCT exit roller sensor is not activated within 225 pulses after the LCT exit roller contact motor has turned on at its initialization. • The LCT exit roller sensor detects for 25 pulses even after the LCT exit roller has moved away from its home position. • The LCT exit roller sensor does not detect within 25 pulses after the LCT exit roller has moved back to its home position. |
| Causes: | • Poor connection or defective LCT exit roller contact motor • Poor connection or defective LCT exit roller sensor |
| Remedy: | 1. Check the harness connection. 2. Replace the LCT exit roller contact motor. 3. Replace the LCT exit roller sensor. |
| Error code: | 512 |
| Display: | CAPSHTR ORGIN |
| Description: | Replace brown developer |
| Causes: | • Poor connection or defective LCT exit roller contact motor • Poor connection or defective LCT exit roller sensor |
| Remedy: | 1. Check the harness connection. 2. Replace the LCT exit roller contact motor. 3. Replace the LCT exit roller sensor. |
| Error code: | 513 |
| Display: | ERROR 513 !MEDIA HEIGHT |
| Description: | Copy cartridge (drum unit) will need replacing soon |
| Remedy: | 1. Check the state of the Jam Detection Sensor. 2. Check the connector connection of the Jam Sensor and check the connection route. 3. Replace the Jam Detection Sensor (L/R) with a new one. 4. Replace the Slider PCB with a new one. 5. Replace the Main PCB with a new one. |
| Error code: | 516 |
| Display: | ERROR 516 MEDIA SET POSITION L |
| Description: | DADF feed rollers should be replaced |
| Causes: | • Loose connection between the BCU and the duplex unit controller board |
| Remedy: | 1. Check the media setting position. 2. Perform cleaning of the media width sensor. 3. Execute [#TEST PAPER SENSOR]. |
| Error code: | 517 |
| Description: | Replace exposure lamp |
| Causes: | • One of the fuses on the duplex unit controller has blown. NOTE: The fuses prevent excess electricity from flowing into the motors. |
| Remedy: | 2/1 Optional Cassette Unit error, or 2/1 Optional Cassette Unit other than this printer`s option is installed |
| Error code: | 520 |
| Description: | Replace optics filter |
| Causes: | • Physical obstruction blocking motor • Motor harness damaged, defective • Motor defective |
| Error code: | 521 |
| Description: | Replace particle filter |
| Causes: | • Physical obstruction blocking motor • Motor harness damaged, defective • Motor defective |
| Error code: | 523 |
| Description: | Replace fuser pawls |
| Causes: | • Fusing oil not circulated in the fusing unit • Overload to the fusing motor • Poor connection or defective LCT exit roller contact motor |
| Remedy: | 1. Check or replace the fusing unit. 2. Check if remaining paper or obstruction in the fusing unit stops the fusing motor drive. 3. Replace the fusing motor. |
| Error code: | 524 |
| Description: | Paper exit motor error • The machine detects a rotation error of the paper exit motor for 0.1 second after the paper exit motor has rotated for 0.9 second. • The machine does not detect any signal from the paper exit motor for 0.1 second when the paper exit motor is in the ready condition |
| Causes: | • Paper jam in the paper exit area • Incorrect rotation speed setting of the paper exit motor • Incorrect rotation speed setting of the fusing motor • Defective paper exit motor • Defective PDB. |
| Remedy: | 1. Remove the paper jam. 2. Input the default setting for the paper exit motor with SP1-805-001. 3. Input the default setting for the fusing motor with SP1-907-001. 4. Replace the paper exit motor. 5. Replace the PDB. |
| Error code: | 525 |
| Description: | Transport motor error: bank 1 The machine detects a Lock signal from a bank 1 transport motor after the motor turned on. |
| Causes: | Motor overload. Defective motor. Disconnected connectors. Broken harness. |
| Remedy: | 1. Turn off and on the main power switch. 2. Check or connect the connectors. 3. Replace the harness. 4. Replace the motor. |
| Error code: | 526 |
| Description: | Transport motor error: bank 2 The machine detects a Lock signal from a bank 2 transport motor after the motor turned on. |
| Causes: | Motor overload. Defective motor. Disconnected connectors. Broken harness. |
| Remedy: | 1. Turn off and on the main power switch. 2. Check or connect the connectors. 3. Replace the harness. 4. Replace the motor. |
| Error code: | 527 |
| Description: | Deve home position sensor malfunction |
| Error code: | 530 |
| Description: | LSU Fan Motor Error |
| Causes: | A LOCK signal is not detected for more than ten seconds while the motor START signal is on and if this error occurs twice consecutively, this SC is issued. |
| Remedy: | • Disconnected or defective motor harness. • Defective LSU fan motor 1. Check or replace the motor harness. 2. Replace the LSU fan motor. |
| Error code: | 531 |
| Description: | Fusing Fan Motor Error |
| Causes: | A LOCK signal is not detected for more than ten seconds while the motor START signal is on and if this error occurs twice consecutively, this SC is issued. |
| Remedy: | • Disconnected or defective motor harness. • Defective LSU fan motor 1. Check or replace the motor harness. 2. Replace the fusing fan motor. |
| Error code: | 532 |
| Description: | IH coil fan error The machine does not detect the fan motor lock signal for 2 seconds while the IH coil fan turns on. |
| Causes: | • Disconnected harness • Overload on the IH coil fan motor • Defective IH coil fan motor • Defective IOB |
| Remedy: | 1. Check or replace the harness. 2. Replace the IH coil fan. 3. Replace the IOB. |
| Error code: | 533 |
| Description: | IH inverter fan error The machine does not detect the fan motor lock signal for 2 seconds while the IH inverter fan turns on. |
| Causes: | • Disconnected harness • Overload on the IH inverter fan motor • Defective IH inverter fan motor • Defective IOB |
| Remedy: | 1. Check or replace the harness. 2. Replace the IH inverter fan. 3. Replace the IOB. |
| Error code: | 534 |
| Description: | Second duct fan error The machine does not detect the fan motor lock signal for 2 seconds while the second duct fan turns on. |
| Causes: | • Disconnected harness • Overload on the second duct fan motor • Defective second duct motor • Defective IOB |
| Remedy: | 1. Check or replace the harness. 2. Replace the second duct fan. 3. Replace the IOB. |
| Error code: | 535 |
| Description: | Paper exit fan error The lock sensor value is monitored every 100 ms when the motor is ON. If the retrieval of the lock signal fails 100 times consecutively, it is determined as a failure to rotate properly. |
| Causes: | Motor overload. Defective motor. Loose connection. Broken harness. Defective IOB. |
| Remedy: | • Replace the motor. • Reconnect the connector. • Replace the harness. • Replace the IOB. |
| Error code: | 536 |
| Description: | Third duct fan error The motor lock signal error is detected for 10 seconds after the motor lock signal was first detected. |
| Causes: | • Defective controller fan motor |
| Remedy: | 1. Replace the controller fan motor. 2. Replace the IOB. |
| Error code: | 537 |
| Description: | Fusing cooling fan error The motor lock signal error from the fusing cooling fan is detected for 10 seconds after turning on the fusing cooling fan. |
| Causes: | • Disconnected harness of the fusing cooling fan • Defective fusing cooling fan • Defective BCU |
| Remedy: | 1. Check or replace the harness of the fusing cooling fan. 2. Replace the fusing cooling fan. 3. Replace the BCU. |
| Error code: | 543 |
| Description: | High Temperature Detection Error |
| Causes: | This SC is issued if one of following conditions occurs: • The thermistor (center) detects 255?XC or thermistor (end) detects 245?XC. • The thermistor (center) detects a 3?XC increment or more for five seconds at 220?XC or more or the thermistor (end) detects a 4?XC increment or more for five seconds at 210?XC or more.ne |
| Remedy: | • Defective I/O control (EGB) • Defective EGB 1. Replace the EGB • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated. |
| Error code: | 544 |
| Description: | Fusing Temperature: Error 2 (Hardware Detection) The fusing thermistor that monitors the temperature of the hot roller detected a fusing temperature of 235oC (455oF), due to a Triac short which interfered with fusing temperature control. |
| Causes: | • MCU defective • PSU defective • Fusing unit defective |
| Error code: | 545 |
| Description: | Heating Lamp Full-Power Error |
| Causes: | The fusing lamp is fully-powered for a certain time while the fusing unit stays in the stand-by mode and is not rotating. |
| Remedy: | • Deformed thermistor • Thermistor not in the correct position • Defective fusing lamp 1. Replace the fusing unit. 2. Replace the fusing lamp. • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated. |
| Error code: | 546 |
| Description: | Fusing Temperature: Error 4 The machine detected that the fusing temperature was fluctuating out of range for more than 60 sec. (7 readings detected temperature fluctuating more than ±20C) |
| Causes: | • Thermistor connection loose, disconnected, defective • Hot roller thermistor not positioned correctly • Fusing lamp connections loose, disconnected, defective • MCU defective |
| Error code: | 547 |
| Description: | Zero Cross Error |
| Causes: | The zero cross signal is not detected for three seconds even though the fusing lamp relay is on after turning on the main power or closing the front door. |
| Remedy: | • Defective fusing lamp relay 1. Turn the main power switch off and on. • Execute "Engine Maintenance Menu" to recover the machine after completing the recovery procedure. Otherwise, the machine continues to issue this SC code and cannot be operated. The power should be turned off and on after the recovery procedure. |
| Error code: | 620 |
| Display: | ERROR 620 POSITIVE P.NotEnough |
| Description: | Communication timeout error between BICU and finisher The BICU did receive a response within 100 ms after 3 attempts after sending data to the finisher. |
| Causes: | • Serial line connecting BICU and finisher unstable • External noise • BICU board and finisher main board connection defective or loose • Finisher main board defective • BICU board defective |
| Remedy: | 1. Check or replace the cable between IPU and ADF. 2. Replace the ADF. 3. Replace the IPU. |
| Error code: | 621 |
| Display: | ERROR 621 POSITIVE P.OVER |
| Description: | Finisher/Mail box communication error An error occurs during line connection. A communication error report is received from the UART. |
| Causes: | The finisher`s control board is faulty. Defective BCU/IOB. The finisher`s connection is faulty. Reconnect the finisher/mail box cables. |
| Remedy: | • Reconnect the finisher/mail box cables. • Replace the BCU. • Replace the finisher/mail box. • Turn the main power switch off and on. |
| Error code: | 622 |
| Description: | Paper Bank communication error An error occurs during line connection. A communication error report is received from the UART. |
| Causes: | The paper bank`s control board is faulty. Defective BCU/IOB. The paper bank`s connection is faulty. |
| Remedy: | • Reconnect the paper bank cables. • Replace the BCU. • Replace the paper bank. • Turn the main power switch off and on. |
| Error code: | 623 |
| Description: | 2nd Paper Bank communication error An error code is issued from the paper bank unit. |
| Causes: | Loose connection. Defective paper bank. |
| Remedy: | • Reconnect the connector. • Replace the paper bank. • Turn the main power switch off and on. |
| Error code: | 624 |
| Description: | 4th Paper Bank (option) communication error This SC is not issued for this machine. When a communication error signal between the 3rd paper bank and 4th paper bank is received. |
| Causes: | • Loose or disconnected connector |
| Remedy: | Check the connection between the main machine and paper feed unit. |
| Error code: | 626 |
| Description: | BICU/LCT communication/timeout error After 1 data frame is sent to the LCT, an ACK signal is not received within 100 ms, and is not received after 3 retries. |
| Causes: | • Serial line connection unstable • External noise on the line |
| Remedy: | 1. Check the connection between the above devices. 2. Replace the RCB. 3. Replace the BCU. |
| Error code: | 627 |
| Display: | ERROR 627 INSERT CARTRIDGE |
| Description: | BICU/LCT communication/break reception error During communication with the LCT, the BICU received a break (Low) signal. |
| Causes: | • Serial line connection unstable • External noise on the line |
| Error code: | 830 |
| Display: | SYSTEM HALT (*) 830 : FW/SV MDL |
| Description: | FW error (Print module error) |
| Remedy: | 1. Update F/W. 2. Check and clear the parameter. 3. Disconnect and connect the FFC located between the FFC Junction PCB and the SL-Relay PCB. Also, confirm that insulating sheets have been inserted between six FFCs. 4. Disconnect and connect the FFC located between the SL-Relay PCB and the Slider PCB. Also, confirm that insulating sheets have been inserted between six FFCs. 5. Replace the FFC located between the FFC Junction PCB and the SL-Relay PCB. 6. Replace the FFC located between the SL-Relay PCB and the Slider PCB. 7. Replace the Main PCB with a new one. |
| Error code: | 831 |
| Display: | SYSTEM HALT (*) 831 : FW/PRN MDL |
| Description: | FW error (Print module error) |
| Remedy: | 1. Update F/W. 2. Check and clear the parameter. 3. Disconnect and connect the FFC located between the FFC Junction PCB and the SL-Relay PCB. Also, confirm that insulating sheets have been inserted between six FFCs. 4. Disconnect and connect the FFC located between the SL-Relay PCB and the Slider PCB. Also, confirm that insulating sheets have been inserted between six FFCs. 5. Replace the FFC located between the FFC Junction PCB and the SL-Relay PCB. 6. Replace the FFC located between the SL-Relay PCB and the Slider PCB. 7. Replace the Main PCB with a new one. |
| Error code: | 832 |
| Display: | SYSTEM HALT (*) 832 : FW/SV MDL |
| Description: | FW error (Print module error) |
| Remedy: | 1. Update F/W. 2. Check and clear the parameter. 3. Disconnect and connect the FFC located between the FFC Junction PCB and the SL-Relay PCB. Also, confirm that insulating sheets have been inserted between six FFCs. 4. Disconnect and connect the FFC located between the SL-Relay PCB and the Slider PCB. Also, confirm that insulating sheets have been inserted between six FFCs. 5. Replace the FFC located between the FFC Junction PCB and the SL-Relay PCB. 6. Replace the FFC located between the SL-Relay PCB and the Slider PCB. 7. Replace the Main PCB with a new one. |
| Error code: | 833 |
| Display: | SYSTEM HALT (*) 833 : FW/PRN MDL |
| Description: | Self-diagnostic error 8: Engine I/F ASIC |
| Causes: | [0F30] [0F31] • ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the BCU. [0F41] • ASIC (Mandolin) for system control could not be detected. After the PCI configuration, the device ID for the ASIC could not be checked. Replace the BCU. |
| Error code: | 998 |
| Description: | Tray Elevator Motor Error |
| Causes: | • Software bug • A RAM or DIMM option needed for the application not installed, or not installed correctly • Controller board defective |
| Remedy: | 1 Are the connectors CN4 at the tray elevator motor and connector PJ4 on the finisher control board properly connected? Go to step 2. Properly connect the connectors. 2 Make sure that the finisher set switch is activated. Power the printer off. Measure for approximately +24 V dc (–10%) between pins 1 and 2 of connector CN4 at the tray elevator motor. Power the printer on and observe the voltage meter during the first 12 seconds of power up. Is +24 V dc present while the printer is powering up? Replace the tray elevator motor. Go to step 3. 3 Disconnect CN4 at the tray elevator motor. Disconnect PJ4 on the finisher control board. Measure for continuity between CN4 pin 1 and PJ4 pin 7. Measure for continuity between CN4 pin 2 and PJ4 pin 8. Is there continuity in both locations? Go to step 4. Replace the cable. 4 Measure for +24 V dc (–10%) between pins 1 and 2 on connector PJ6. Is +24 V dc present? Replace the finisher control board. Replace the finisher power supply. |
Название
EPSON Коллектор обработанного тонера
EPSON Тонер-картридж черный
EPSON Тонер-картридж желтый
EPSON Тонер-картридж пурпурный
EPSON Тонер-картридж голубой
EPSON Блок фотобарабана
