Epson L201
Рейтинг
Модули
MECH-012
CASE-011
ELEC-011
SC-012
MECH-024
Детали SC-012
| Деталь: | PICK ASSY |
| Парткод: | 1617006 |
| Деталь: | CARRIER |
| Парткод: | 1555018 |
| Деталь: | HOLDER CONTACT |
| Парткод: | 1497098 |
| Деталь: | CAP ASSY.CA46, B |
| Парткод: | 1517060 |
| Деталь: | TIRE PICK |
| Парткод: | 1547068 |
| Деталь: | FELT MIDDLE UPPER |
| Парткод: | 1526919 |
| Деталь: | FELT MIDDLE LOWER |
| Парткод: | 1526918 |
| Деталь: | FOAM BOTTOM CARRIAGE ASSY |
| Парткод: | 1563604 |
| Деталь: | FELT RIGHT |
| Парткод: | 1526913 |
| Деталь: | FELT LEFT LOWER |
| Парткод: | 1526916 |
| Деталь: | FELT LEFT UPPER |
| Парткод: | 1526917 |
| Деталь: | FELT BOTTOM CARRIAGE C |
| Парткод: | 1563605 |
| Деталь: | FORM TUBE END |
| Парткод: | 1526926 |
| Деталь: | PRINT HEAD |
| Парткод: | F181010 |
| Деталь: | FFC (CARRIER-MAIN) 17PIN |
| Парткод: | 2137824 |
| Деталь: | FFC (CARRIER-MAIN) 21PIN |
| Парткод: | 2137826 |
| Деталь: | HOUSING BUCKLER |
| Парткод: | 1527788 |
| Деталь: | HOUSING PUMP |
| Парткод: | 1529029 |
| Деталь: | ROLLER PUMP |
| Парткод: | 1497054 |
| Деталь: | BRACKET PUMP |
| Парткод: | 1497055 |
| Деталь: | GEAR PUMP IDLE |
| Парткод: | 1529028 |
| Деталь: | GEAR PUMP |
| Парткод: | 1497053 |
| Деталь: | TUBE,PUMP, B |
| Парткод: | 1548716 |
| Деталь: | BUCKLER FRICTION |
| Парткод: | 1527939 |
| Деталь: | BUCKLER FRICTION R |
| Парткод: | 1527790 |
| Деталь: | GEAR EXIT 93T |
| Парткод: | 1527791 |
| Деталь: | ROLLER FEED PINCH |
| Парткод: | 1497105 |
| Деталь: | ENCODER CARRIER M |
| Парткод: | 1554197 |
| Деталь: | BELT CARRIAGE |
| Парткод: | 1554198 |
| Деталь: | SPRING ENCORDER |
| Парткод: | 1537611 |
| Деталь: | TRAY EXIT INNER (W) |
| Парткод: | 1529295 |
| Деталь: | INK BOTTLE BXEDBKDYE, 716C70CISAS |
| Парткод: | 1610434 |
| Деталь: | INK BOTTLE BXEDCDYE, 716C70CISAS |
| Парткод: | 1610436 |
| Деталь: | INK BOTTLE BOXEDMDYE, 716C70CISAS |
| Парткод: | 1610437 |
| Деталь: | INK BOTTLE BOXEDYDYE, 716C70CISAS |
| Парткод: | 1610438 |
| Деталь: | SOFTWARE CDEURO |
| Парткод: | 3106933 |
| Деталь: | SUPPLEMENT |
| Парткод: | 4121920 |
| Деталь: | SETTING UP MANUAL |
| Парткод: | 4121923 |
| Деталь: | USERS GUIDE |
| Парткод: | 4121924 |
| Деталь: | CASE MIDDLE C |
| Парткод: | 1542785 |
| Деталь: | COVER JAM (B) |
| Парткод: | 1529304 |
| Деталь: | TRAY SUPPORT PAPER (B) |
| Парткод: | 1529296 |
| Деталь: | TRAY SUPPORT PAPER 2 (B) |
| Парткод: | 1529298 |
| Деталь: | COVER INK TUBE2(B) |
| Парткод: | 1513152 |
| Деталь: | COVER USB (B) |
| Парткод: | 1529026 |
| Деталь: | TRAY EXIT OUTER (B) |
| Парткод: | 1529292 |
| Деталь: | TRAY EXIT INNER (B) |
| Парткод: | 1529294 |
| Деталь: | COVER PANEL (B) |
| Парткод: | 1529300 |
| Деталь: | POWER CABLE |
| Парткод: | 2121764 |
| Деталь: | SCHOTTKY BARRIER DIODE |
| Парткод: | 2147876 |
| Деталь: | FUSE |
| Парткод: | 2082066 |
| Деталь: | FUSE |
| Парткод: | 2116554 |
| Деталь: | STRONG TAPE NO.388 BLUE |
| Парткод: | 1032813 |
| Деталь: | GREASE G-26 (40GR)(B702600001) |
| Парткод: | 1080614 |
| Деталь: | GREASE G-74 |
| Парткод: | 1409257 |
| Деталь: | GREASE G-71(BLUE) |
| Парткод: | 1480655 |
| Деталь: | GREASE,G-94 |
| Парткод: | 1561125 |
| Деталь: | SHIPPING CLEANING LIQUID,CR06A,1kg |
| Парткод: | 6104713 |
| Деталь: | SHIPPING CLEANING LIQUID,CR06A,18kg |
| Парткод: | 6104714 |
| Деталь: | PCB OP |
| Парткод: | 2131268 |
| Деталь: | PCB ENCODER |
| Парткод: | 2132561 |
| Деталь: | MAIN PCB ASSY MFP |
| Парткод: | 2147944 |
| Деталь: | PCB FEED ENCODER |
| Парткод: | 2132562 |
| Деталь: | POWER UNIT 220V |
| Парткод: | 2130514 |
| Деталь: | SCANNER UNIT (B) |
| Парткод: | 1555010 |
| Деталь: | COVER INK (B) |
| Парткод: | 1529310 |
| Деталь: | CIS |
| Парткод: | 2136873 |
| Деталь: | COVER DOCUMENT (B) |
| Парткод: | 1529316 |
| Деталь: | PAD DOCUMENT |
| Парткод: | 1529318 |
| Деталь: | COVER ASF |
| Парткод: | 1529303 |
| Деталь: | FFC(CIS-MAIN) 12PIN |
| Парткод: | 2142896 |
| Деталь: | TANK SUPPLY INK MAGENTA ASSY, B.,CC26 |
| Парткод: | 1615838 |
| Деталь: | TANK,SUPPLY,INK,YELLOW ASSY, B.,CC26 |
| Парткод: | 1615840 |
| Деталь: | TANK SUPPLY INK CYAN ASSY, B.,CC26 |
| Парткод: | 1615842 |
| Деталь: | TANK SUPPLY INK BLACK ASSY, B.,CC26 |
| Парткод: | 1615839 |
| Деталь: | CAP,TANK, B |
| Парткод: | 1597513 |
| Деталь: | COVER,LEFT, B |
| Парткод: | 1551076 |
| Деталь: | COVER,RIGHT, B |
| Парткод: | 1551077 |
| Деталь: | COVER,TOP, B |
| Парткод: | 1551571 |
| Деталь: | CVERBTTM, B |
| Парткод: | 1551075 |
| Деталь: | VALVE, ASSY., CB42, ASP |
| Парткод: | 1567499 |
| Деталь: | LEVER VALVE, B |
| Парткод: | 1564366 |
| Деталь: | TUBEADAPTERASSY., CB43, ASP |
| Парткод: | 1567500 |
| Деталь: | ADAPTERASSY, B, CD76, EPPI |
| Парткод: | 1624320 |
| Деталь: | HOLDERSUPPLYASSY, C |
| Парткод: | 1551569 |
| Деталь: | GUIDETUBESUPPLY INK1ST, B |
| Парткод: | 1563741 |
| Деталь: | GUIDETUBESUPPLYINK2nd, B |
| Парткод: | 1551575 |
| Деталь: | JOINTTUBE |
| Парткод: | 1538442 |
| Деталь: | GUIDE PLATETUBE |
| Парткод: | 1538444 |
| Деталь: | C.B.P-TITE SCREW2.6X16F/ZN-3C |
| Парткод: | 1542327 |
| Деталь: | LABELINITIAL SETUP, C |
| Парткод: | 1559384 |
| Деталь: | LABELVALVE POSITION, C |
| Парткод: | 1559378 |
| Деталь: | GUIDE PLATETUBESUPPORT |
| Парткод: | 1543355 |
| Деталь: | COVERJOINT4C |
| Парткод: | 1551074 |
| Деталь: | HOLDERTUBEVALVEFRONT, D |
| Парткод: | 1563755 |
| Деталь: | HOLDERTUBEVALVEREAR, D |
| Парткод: | 1563749 |
| Деталь: | PRESSING PLATETUBE, C |
| Парткод: | 1563742 |
Коды ошибок
01H
02H
03H
04H
08H
09H
0AH
0CH
Описание
| Error code: | 01H |
| Description: | ADF PID excess speed (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
| Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | 02H |
| Description: | ADF PID reverse (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
| Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | 03H |
| Description: | ADF PID lock (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Error code: | 04H |
| Description: | Printer control board malfunction • Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out. |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Remedy: | 1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB. |
| Error code: | 08H |
| Description: | Main motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the main motor remains energized. • The motor lock signal remains LOW for a predetermined consecutive period of time while the main motor remains deenergized. |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1. |
| Error code: | 09H |
| Description: | Printer: CR load position excess speed error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt |
| Error code: | 0AH |
| Description: | Printer: CR load position excess load error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | 0CH |
| Description: | Power supply cooling fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the power supply cooling fan motor remains energized. |
| Causes: | An error occurred in the CR motor operating sequence |
| Remedy: | 1 Check the FM1 connector for proper connection and correct as necessary. 2 Check FM1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ4PRCB-1 (REM) PRCB PJ4PRCB-3 (LOCK) C-2. 5 Change PRCB. 6 Change DCPU1. |
