
Epson L800
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
пьезоэлектрическая струйная
Макс. формат
A4
Скорость печати
A4
38
Цветность печати
цветная
Общие характеристики |
|
---|---|
Сканер |
|
Телефон |
|
Цветность печати |
цветная |
Факс |
|
Макс. формат |
A4 |
Копир |
|
Тип устройства |
Принтер |
Размещение |
настольный |
Технология печати |
пьезоэлектрическая струйная |
Печать фотографий |
![]() |
Тип |
струйный |
Принтер |
|
Количество цветов |
6 |
Мин, объем капли |
1,5 пл |
Время цветной печати 10x15 см |
12 |
Прямая печать |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Печать без полей |
![]() |
Система непрерывной подачи чернил |
![]() |
Макс, разрешение для ч/б печати |
|
По Y | 1 440 |
По X | 5 760 |
Скорость ч/б печати |
|
A4 | 38 |
A4 | 37 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Слайд-адаптер |
|
Расходные материалы |
|
Количество картриджей |
6 |
Ресурс цветного картриджа/тонера |
1 800 |
Ресурс ч/б картриджа/тонера |
9 900 |
Печать на: |
|
Рулоне |
|
Карточках |
![]() |
Пленках |
![]() |
Этикетках |
![]() |
CD/DVD |
![]() |
Матовой бумаге |
![]() |
Глянцевой бумаге |
![]() |
Фотобумаге |
![]() |
Конвертах |
![]() |
Плотность бумаги |
|
Минимальная | 64 |
Максимальная | 300 |
Факс |
|
PC Fax |
|
Цветной |
|
Телефон |
|
Автоответчик |
|
Стандарт DECT |
|
АОН |
|
Проводная трубка |
|
Спикерфон |
|
Caller ID |
|
Беспроводная трубка |
|
Языки управления |
|
PCL 5e |
|
PCL 5c |
|
PostScript 3 |
|
PostScript 2 |
|
PPDS |
|
PCL 6 |
|
PostScript |
|
|
|
Лотки |
|
Подача бумаги |
|
Стандартная | 120 |
Вывод бумаги |
|
Стандартный | 50 |
Финишер |
|
Сортировка со сдвигом |
|
Электронная сортировка |
|
Сортер |
|
Брошюровщик |
|
Степлер |
|
Интерфейсы |
|
Версия USB |
2,0 |
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
RS-232 |
|
Инфракрасный порт |
|
Ethernet (RJ-45) |
|
AirPrint |
|
LPT |
|
Bluetooth |
|
Wi-Fi 802.11n |
|
Веб-интерфейс |
|
Wi-Fi |
|
USB |
![]() |
Дополнительная информация |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
Linux |
![]() |
Mac OS |
![]() |
Windows |
![]() |
DOS |
|
Потребляемая мощность |
|
При работе | 13 |
Габариты |
|
Глубина |
289 |
Высота |
188 |
Ширина |
537 |
Вес |
6,2 |
Модули
MECH-024A
ELEC-012
MECH-011
MECH-035EEB
CASE-012A
Детали CASE-012A
Деталь: | PRINTER MECHANISM:ASP |
Парткод: | 2151622 |
Деталь: | PAPER GUIDE FRONT ASSY..CB57:ASP:EPPI |
Парткод: | 1552782 |
Деталь: | POROUS PAD.PAPER GUIDE.FRONT |
Парткод: | 1463787 |
Деталь: | FRAME EJ ASSY.:CE86:EPPI |
Парткод: | 1692536 |
Деталь: | TORSION SPRING.FRAME.EJ.LEFT |
Парткод: | 1410323 |
Деталь: | TORSION SPRING.FRAME.EJ |
Парткод: | 1410043 |
Деталь: | LEVER.PE |
Парткод: | 1410051 |
Деталь: | TORSION SPRING.LEVER.PE |
Парткод: | 1447953 |
Деталь: | MOTOR.ASSY..PF |
Парткод: | 2126943 |
Деталь: | PAPER GUIDE UPPER ASSY, C691, EPPI |
Парткод: | 1465137 |
Деталь: | HOLDER.APG |
Парткод: | 1481233 |
Деталь: | SPUR GEAR.28.8 |
Парткод: | 1465029 |
Деталь: | COMPRESSION SPRING.2.25 |
Парткод: | 1416886 |
Деталь: | SPUR GEAR.12.8 |
Парткод: | 1409938 |
Деталь: | SPUR GEAR,33.6, B |
Парткод: | 1468745 |
Деталь: | COMPRESSION SPRING.0.97 |
Парткод: | 1409943 |
Деталь: | COMBINATION GEAR.12.8.27 |
Парткод: | 1409945 |
Деталь: | COMBINATION GEAR,14,22 |
Парткод: | 1409946 |
Деталь: | SCALE.CR |
Парткод: | 1409999 |
Деталь: | MOTOR ASSY..CR |
Парткод: | 2116693 |
Деталь: | PULLEY,DRIVEN, B |
Парткод: | 1467981 |
Деталь: | SHAFT.PULLEY.DRIVEN |
Парткод: | 1262438 |
Деталь: | HOLDER.PULLY.DRIVEN, B |
Парткод: | 1510062 |
Деталь: | INK SYSTEM ASSY, CB57, ASP, EPPI |
Парткод: | 1552783 |
Деталь: | EXTENSION SPRING.0.8 |
Парткод: | 1409580 |
Деталь: | LOCK.CR |
Парткод: | 1481010 |
Деталь: | COMPRESSION SPRING.0.98 |
Парткод: | 1474961 |
Деталь: | TIMING BELT.CR |
Парткод: | 1551276 |
Деталь: | SHAFT.GUIDE.CR |
Парткод: | 1409935 |
Деталь: | CARRIAGE ASSY, CB57, ASP, EPPI |
Парткод: | 1552781 |
Деталь: | CABLE HEAD ASSY..CB57, EPPI |
Парткод: | 1550842 |
Деталь: | HARNESS,DETECTOR,GUIDE,CDR, B |
Парткод: | 2121202 |
Деталь: | LEAF SENSOR |
Парткод: | 2090717 |
Деталь: | DETECTOR,LEAF,B2 |
Парткод: | 2020393 |
Деталь: | SHEET.MIST, B |
Парткод: | 1424205 |
Деталь: | SHEET.MIST.PAPER GUIDE.UPPER |
Парткод: | 1426445 |
Деталь: | SHEET.MIST.LD |
Парткод: | 1483950 |
Деталь: | SHEET,MIST,LD, B |
Парткод: | 1483951 |
Деталь: | PHOTO INTERRUPTER |
Парткод: | 2143464 |
Деталь: | PRINT HEAD |
Парткод: | F180040 |
Деталь: | SCALE.PF |
Парткод: | 1262694 |
Деталь: | DOUBLE SIDED TAPE.D21 |
Парткод: | 1212722 |
Деталь: | CABLE.ENCODER.PF |
Парткод: | 2116697 |
Деталь: | BOARD ASSY.,ENCODER,PF |
Парткод: | 2116736 |
Деталь: | SPUR GEAR.26.5 |
Парткод: | 1438752 |
Деталь: | ASF ASSY.,CB57, EPPI |
Парткод: | 1609430 |
Деталь: | GUIDE.ROLLER.LD |
Парткод: | 1473588 |
Деталь: | TORSION SPRING,137.7 |
Парткод: | 1295162 |
Деталь: | ROLLER D |
Парткод: | 1640813 |
Деталь: | HOLDER ROLLER RETARD ASSY.,M,C653, EPPI |
Парткод: | 1447353 |
Деталь: | COMBINATION GEAR.16.8.32.8 |
Парткод: | 1409638 |
Деталь: | LEVER,CHANGE, B |
Парткод: | 1474785 |
Деталь: | SPUR,GEAR,16, B |
Парткод: | 1467962 |
Деталь: | COMPRESSION SPRING.2.36 |
Парткод: | 1250632 |
Деталь: | TRAYPOROUS PAD.ASSY., B |
Парткод: | 1469197 |
Деталь: | HOLDER.CONNECTOR.CSIC |
Парткод: | 1431481 |
Деталь: | COVER.CABLE.HEAD.INNER |
Парткод: | 1431483 |
Деталь: | COVER.CABLE.HEAD |
Парткод: | 1431482 |
Деталь: | POROUS PAD.HOUSING.LOWER |
Парткод: | 1499173 |
Деталь: | POROUS PAD INK,EJ,CAP,LOWER, B |
Парткод: | 1499152 |
Деталь: | SHAFT ROLLER D ASSY, C691, EPPI |
Парткод: | 1466932 |
Деталь: | TANK,SUPPLY,INK,MAGENTA,ASSY, F |
Парткод: | 1615831 |
Деталь: | TANK.SUPPLY.INK.YELLOW.ASSY, F |
Парткод: | 1615833 |
Деталь: | TANK,SUPPLY,INK,CYAN,ASSY, F |
Парткод: | 1615834 |
Деталь: | TANK.SUPPLY.INK.BLACK.ASSY, F |
Парткод: | 1615832 |
Деталь: | TANK,SUPPLY,INK,L.CYAN,ASSY, F |
Парткод: | 1615835 |
Деталь: | TANK.SUPPLY.INK.L. MAGENTA.ASSY, F |
Парткод: | 1615836 |
Деталь: | CAP,TANK, B |
Парткод: | 1597513 |
Деталь: | COVER.RIGHT |
Парткод: | 1545378 |
Деталь: | COVER.LEFT |
Парткод: | 1545377 |
Деталь: | COVER.TOP |
Парткод: | 1545379 |
Деталь: | COVER.BOTTOM |
Парткод: | 1545380 |
Деталь: | VALVE ASSY.ASP, CB57, ASP, EPPI |
Парткод: | 1641731 |
Деталь: | LEVER VALVE, B |
Парткод: | 1564366 |
Деталь: | TUBE.SUPPLY.INK ADAPTER ASSY..B, CB57, ASP |
Парткод: | 1639369 |
Деталь: | ADAPTER,ASSY, B, CD76, EPPI |
Парткод: | 1624320 |
Деталь: | JOINT.TUBE |
Парткод: | 1545382 |
Деталь: | GUIDE.TUBE |
Парткод: | 1547231 |
Деталь: | SHEET.GUIDE.TUBE |
Парткод: | 1551274 |
Деталь: | SHEET.GUIDE.TUBE.SUB |
Парткод: | 1551275 |
Деталь: | COVER.ADAPTOR |
Парткод: | 1547234 |
Деталь: | HOLDER.TUBE |
Парткод: | 1547235 |
Деталь: | SHEET.SCALE.PF |
Парткод: | 1552175 |
Деталь: | COVER,JOINT,6C |
Парткод: | 1551073 |
Деталь: | POROUS PAD.COVER.CASE |
Парткод: | 1551272 |
Деталь: | POROUS PAD.TUBE |
Парткод: | 1551273 |
Деталь: | COVER.SCALE.PF.INNER |
Парткод: | 1552174 |
Деталь: | HOLDER,TUBE,VALVE,FRONT, D |
Парткод: | 1563755 |
Деталь: | HOLDER.TUBE.VALVE.REAR, D |
Парткод: | 1563749 |
Деталь: | PFP BASE SCALE |
Парткод: | 1453980 |
Деталь: | CAP.AIR RELEASE HOLE |
Парткод: | 1556135 |
Деталь: | SHIPPING CLEANING LIQUID.CR06A.1ka |
Парткод: | 6104713 |
Деталь: | SHIPPING CLEANING LIQUIDCR06A18kg |
Парткод: | 6104714 |
Деталь: | GREASE G-77 |
Парткод: | 1575865 |
Деталь: | BOARD ASSY..MAIN |
Парткод: | 2154015 |
Деталь: | BOARD ASSY..MAIN |
Парткод: | 2174808 |
Деталь: | BOARD ASSY..PANEL |
Парткод: | 2116495 |
Деталь: | BOARD ASSY..PANEL |
Парткод: | 2173131 |
Деталь: | INSULATION SPACER TR |
Парткод: | 2144008 |
Деталь: | POWER SUPPLY ASSY:C691:PSE:EPPI |
Парткод: | 1465151 |
Деталь: | PRINTER MECHANISM:ASP |
Парткод: | 2151622 |
Деталь: | PAPER GUIDE FRONT ASSY..CB57:ASP:EPPI |
Парткод: | 1552782 |
Деталь: | POROUS PAD.PAPER GUIDE.FRONT |
Парткод: | 1463787 |
Деталь: | FRAME EJ ASSY.:CE86:EPPI |
Парткод: | 1692536 |
Деталь: | TORSION SPRING.FRAME.EJ.LEFT |
Парткод: | 1410323 |
Деталь: | TORSION SPRING.FRAME.EJ |
Парткод: | 1410043 |
Деталь: | LEVER.PE |
Парткод: | 1410051 |
Деталь: | TORSION SPRING.LEVER.PE |
Парткод: | 1447953 |
Деталь: | MOTOR.ASSY..PF |
Парткод: | 2126943 |
Деталь: | PAPER GUIDE UPPER ASSY, C691, EPPI |
Парткод: | 1465137 |
Деталь: | HOLDER.APG |
Парткод: | 1481233 |
Деталь: | SPUR GEAR.28.8 |
Парткод: | 1465029 |
Деталь: | COMPRESSION SPRING.2.25 |
Парткод: | 1416886 |
Деталь: | SPUR GEAR.12.8 |
Парткод: | 1409938 |
Деталь: | SPUR GEAR,33.6, B |
Парткод: | 1468745 |
Деталь: | COMPRESSION SPRING.0.97 |
Парткод: | 1409943 |
Деталь: | COMBINATION GEAR.12.8.27 |
Парткод: | 1409945 |
Деталь: | COMBINATION GEAR,14,22 |
Парткод: | 1409946 |
Деталь: | SCALE.CR |
Парткод: | 1409999 |
Деталь: | MOTOR ASSY..CR |
Парткод: | 2116693 |
Деталь: | PULLEY,DRIVEN, B |
Парткод: | 1467981 |
Деталь: | SHAFT.PULLEY.DRIVEN |
Парткод: | 1262438 |
Деталь: | HOLDER.PULLY.DRIVEN, B |
Парткод: | 1510062 |
Деталь: | INK SYSTEM ASSY, CB57, ASP, EPPI |
Парткод: | 1552783 |
Деталь: | EXTENSION SPRING.0.8 |
Парткод: | 1409580 |
Деталь: | LOCK.CR |
Парткод: | 1481010 |
Деталь: | COMPRESSION SPRING.0.98 |
Парткод: | 1474961 |
Деталь: | TIMING BELT.CR |
Парткод: | 1551276 |
Деталь: | SHAFT.GUIDE.CR |
Парткод: | 1409935 |
Деталь: | CARRIAGE ASSY, CB57, ASP, EPPI |
Парткод: | 1552781 |
Деталь: | CABLE HEAD ASSY..CB57, EPPI |
Парткод: | 1550842 |
Деталь: | HARNESS,DETECTOR,GUIDE,CDR, B |
Парткод: | 2121202 |
Деталь: | LEAF SENSOR |
Парткод: | 2090717 |
Деталь: | DETECTOR,LEAF,B2 |
Парткод: | 2020393 |
Деталь: | SHEET.MIST, B |
Парткод: | 1424205 |
Деталь: | SHEET.MIST.PAPER GUIDE.UPPER |
Парткод: | 1426445 |
Деталь: | SHEET.MIST.LD |
Парткод: | 1483950 |
Деталь: | SHEET,MIST,LD, B |
Парткод: | 1483951 |
Деталь: | PHOTO INTERRUPTER |
Парткод: | 2143464 |
Деталь: | PRINT HEAD |
Парткод: | F180040 |
Деталь: | SCALE.PF |
Парткод: | 1262694 |
Деталь: | DOUBLE SIDED TAPE.D21 |
Парткод: | 1212722 |
Деталь: | CABLE.ENCODER.PF |
Парткод: | 2116697 |
Деталь: | BOARD ASSY.,ENCODER,PF |
Парткод: | 2116736 |
Деталь: | SPUR GEAR.26.5 |
Парткод: | 1438752 |
Деталь: | ASF ASSY.,CB57, EPPI |
Парткод: | 1609430 |
Деталь: | GUIDE.ROLLER.LD |
Парткод: | 1473588 |
Деталь: | TORSION SPRING,137.7 |
Парткод: | 1295162 |
Деталь: | ROLLER D |
Парткод: | 1640813 |
Деталь: | HOLDER ROLLER RETARD ASSY.,M,C653, EPPI |
Парткод: | 1447353 |
Деталь: | COMBINATION GEAR.16.8.32.8 |
Парткод: | 1409638 |
Деталь: | LEVER,CHANGE, B |
Парткод: | 1474785 |
Деталь: | SPUR,GEAR,16, B |
Парткод: | 1467962 |
Деталь: | COMPRESSION SPRING.2.36 |
Парткод: | 1250632 |
Деталь: | TRAYPOROUS PAD.ASSY., B |
Парткод: | 1469197 |
Деталь: | HOLDER.CONNECTOR.CSIC |
Парткод: | 1431481 |
Деталь: | COVER.CABLE.HEAD.INNER |
Парткод: | 1431483 |
Деталь: | COVER.CABLE.HEAD |
Парткод: | 1431482 |
Деталь: | POROUS PAD.HOUSING.LOWER |
Парткод: | 1499173 |
Деталь: | POROUS PAD INK,EJ,CAP,LOWER, B |
Парткод: | 1499152 |
Деталь: | SHAFT ROLLER D ASSY, C691, EPPI |
Парткод: | 1466932 |
Деталь: | TANK,SUPPLY,INK,MAGENTA,ASSY, F |
Парткод: | 1615831 |
Деталь: | TANK.SUPPLY.INK.YELLOW.ASSY, F |
Парткод: | 1615833 |
Деталь: | TANK,SUPPLY,INK,CYAN,ASSY, F |
Парткод: | 1615834 |
Деталь: | TANK.SUPPLY.INK.BLACK.ASSY, F |
Парткод: | 1615832 |
Деталь: | TANK,SUPPLY,INK,L.CYAN,ASSY, F |
Парткод: | 1615835 |
Деталь: | TANK.SUPPLY.INK.L. MAGENTA.ASSY, F |
Парткод: | 1615836 |
Деталь: | CAP,TANK, B |
Парткод: | 1597513 |
Деталь: | COVER.RIGHT |
Парткод: | 1545378 |
Деталь: | COVER.LEFT |
Парткод: | 1545377 |
Деталь: | COVER.TOP |
Парткод: | 1545379 |
Деталь: | COVER.BOTTOM |
Парткод: | 1545380 |
Деталь: | VALVE ASSY.ASP, CB57, ASP, EPPI |
Парткод: | 1641731 |
Деталь: | LEVER VALVE, B |
Парткод: | 1564366 |
Деталь: | TUBE.SUPPLY.INK ADAPTER ASSY..B, CB57, ASP |
Парткод: | 1639369 |
Деталь: | ADAPTER,ASSY, B, CD76, EPPI |
Парткод: | 1624320 |
Деталь: | JOINT.TUBE |
Парткод: | 1545382 |
Деталь: | GUIDE.TUBE |
Парткод: | 1547231 |
Деталь: | SHEET.GUIDE.TUBE |
Парткод: | 1551274 |
Деталь: | SHEET.GUIDE.TUBE.SUB |
Парткод: | 1551275 |
Деталь: | COVER.ADAPTOR |
Парткод: | 1547234 |
Деталь: | HOLDER.TUBE |
Парткод: | 1547235 |
Деталь: | SHEET.SCALE.PF |
Парткод: | 1552175 |
Деталь: | COVER,JOINT,6C |
Парткод: | 1551073 |
Деталь: | POROUS PAD.COVER.CASE |
Парткод: | 1551272 |
Деталь: | POROUS PAD.TUBE |
Парткод: | 1551273 |
Деталь: | COVER.SCALE.PF.INNER |
Парткод: | 1552174 |
Деталь: | HOLDER,TUBE,VALVE,FRONT, D |
Парткод: | 1563755 |
Деталь: | HOLDER.TUBE.VALVE.REAR, D |
Парткод: | 1563749 |
Деталь: | PRINT HEAD |
Парткод: | F180040 |
Деталь: | SCALE.PF |
Парткод: | 1262694 |
Деталь: | DOUBLE SIDED TAPE.D21 |
Парткод: | 1212722 |
Деталь: | CABLE.ENCODER.PF |
Парткод: | 2116697 |
Деталь: | BOARD ASSY.,ENCODER,PF |
Парткод: | 2116736 |
Деталь: | SPUR GEAR.26.5 |
Парткод: | 1438752 |
Деталь: | ASF ASSY.,CB57, EPPI |
Парткод: | 1609430 |
Деталь: | GUIDE.ROLLER.LD |
Парткод: | 1473588 |
Деталь: | TORSION SPRING,137.7 |
Парткод: | 1295162 |
Деталь: | ROLLER D |
Парткод: | 1640813 |
Деталь: | HOLDER ROLLER RETARD ASSY.,M,C653, EPPI |
Парткод: | 1447353 |
Деталь: | COMBINATION GEAR.16.8.32.8 |
Парткод: | 1409638 |
Деталь: | LEVER,CHANGE, B |
Парткод: | 1474785 |
Деталь: | SPUR,GEAR,16, B |
Парткод: | 1467962 |
Деталь: | COMPRESSION SPRING.2.36 |
Парткод: | 1250632 |
Деталь: | TRAYPOROUS PAD.ASSY., B |
Парткод: | 1469197 |
Деталь: | HOLDER.CONNECTOR.CSIC |
Парткод: | 1431481 |
Деталь: | COVER.CABLE.HEAD.INNER |
Парткод: | 1431483 |
Деталь: | COVER.CABLE.HEAD |
Парткод: | 1431482 |
Деталь: | POROUS PAD.HOUSING.LOWER |
Парткод: | 1499173 |
Деталь: | POROUS PAD INK,EJ,CAP,LOWER, B |
Парткод: | 1499152 |
Деталь: | SHAFT ROLLER D ASSY, C691, EPPI |
Парткод: | 1466932 |
Деталь: | TANK,SUPPLY,INK,MAGENTA,ASSY, F |
Парткод: | 1615831 |
Деталь: | TANK.SUPPLY.INK.YELLOW.ASSY, F |
Парткод: | 1615833 |
Деталь: | TANK,SUPPLY,INK,CYAN,ASSY, F |
Парткод: | 1615834 |
Деталь: | TANK.SUPPLY.INK.BLACK.ASSY, F |
Парткод: | 1615832 |
Деталь: | TANK,SUPPLY,INK,L.CYAN,ASSY, F |
Парткод: | 1615835 |
Деталь: | TANK.SUPPLY.INK.L. MAGENTA.ASSY, F |
Парткод: | 1615836 |
Деталь: | CAP,TANK, B |
Парткод: | 1597513 |
Деталь: | COVER.RIGHT |
Парткод: | 1545378 |
Деталь: | COVER.LEFT |
Парткод: | 1545377 |
Деталь: | COVER.TOP |
Парткод: | 1545379 |
Деталь: | COVER.BOTTOM |
Парткод: | 1545380 |
Деталь: | VALVE ASSY.ASP, CB57, ASP, EPPI |
Парткод: | 1641731 |
Деталь: | LEVER VALVE, B |
Парткод: | 1564366 |
Деталь: | TUBE.SUPPLY.INK ADAPTER ASSY..B, CB57, ASP |
Парткод: | 1639369 |
Деталь: | ADAPTER,ASSY, B, CD76, EPPI |
Парткод: | 1624320 |
Деталь: | JOINT.TUBE |
Парткод: | 1545382 |
Деталь: | GUIDE.TUBE |
Парткод: | 1547231 |
Деталь: | SHEET.GUIDE.TUBE |
Парткод: | 1551274 |
Деталь: | SHEET.GUIDE.TUBE.SUB |
Парткод: | 1551275 |
Деталь: | COVER.ADAPTOR |
Парткод: | 1547234 |
Деталь: | HOLDER.TUBE |
Парткод: | 1547235 |
Деталь: | SHEET.SCALE.PF |
Парткод: | 1552175 |
Деталь: | COVER,JOINT,6C |
Парткод: | 1551073 |
Деталь: | POROUS PAD.COVER.CASE |
Парткод: | 1551272 |
Деталь: | POROUS PAD.TUBE |
Парткод: | 1551273 |
Деталь: | COVER.SCALE.PF.INNER |
Парткод: | 1552174 |
Деталь: | HOLDER,TUBE,VALVE,FRONT, D |
Парткод: | 1563755 |
Деталь: | HOLDER.TUBE.VALVE.REAR, D |
Парткод: | 1563749 |
Деталь: | TRAY CDR ASSY..CA45:ASP |
Парткод: | 1516753 |
Деталь: | INK BOTTLE BOXED.BK.DYE, 7580.70.CIS.AS |
Парткод: | 1564668 |
Деталь: | INK BOTTLE BOXED.C.DYE:7580,70.CIS.AS |
Парткод: | 1564669 |
Деталь: | INK BOTTLE BOXED.M.DYE:7580.70.CIS.AS |
Парткод: | 1564670 |
Деталь: | INK BOTTLE BOXED.Y.DYE:7580,70.CIS.AS |
Парткод: | 1564671 |
Деталь: | INK BOTTLE BOXEDC.DYE:7580.70.CIS.AS |
Парткод: | 1564672 |
Деталь: | INK BOTTLE BOXED.LM.DYE:7580,70.CIS.AS |
Парткод: | 1564673 |
Деталь: | HOUSING LOWER ASSY..CB57:ASP:EPPI |
Парткод: | 1677399 |
Деталь: | FOOT:B |
Парткод: | 1521980 |
Деталь: | GUIDE.STACKER EFT |
Парткод: | 1463694 |
Деталь: | GUIDE.STACKER.RIGHT |
Парткод: | 1463725 |
Деталь: | STACKER SUPPORT ASSY:C691:EPPI |
Парткод: | 1465134 |
Деталь: | COVER PRINTER ASSY.CB57:EPPI |
Парткод: | 1552563 |
Деталь: | PAPER SUPPORT ASSY.CB57:EPPI |
Парткод: | 1557676 |
Деталь: | COVER.CASE |
Парткод: | 1547233 |
Деталь: | HOUSING.UPPER |
Парткод: | 1545374 |
Деталь: | LEAF SENSOR |
Парткод: | 2090717 |
Деталь: | HARNESS |
Парткод: | 2124467 |
Деталь: | HARNESS.DETECTOR.CASE.OPEN |
Парткод: | 2177694 |
Деталь: | HOLDER.OPEN.SENSOR |
Парткод: | 1505727 |
Деталь: | COVER.INK.TUBE |
Парткод: | 1463533 |
Деталь: | COVER STACKER ASSY..CA45:EPPI |
Парткод: | 1506436 |
Деталь: | HOUSING.RIGHT:C |
Парткод: | 1557962 |
Деталь: | HOUSING PANEL ASSY..CA45:EPPI |
Парткод: | 1506410 |
Деталь: | DECORATION BELT.RIGHT |
Парткод: | 1505725 |
Деталь: | HOUSING EFT:C |
Парткод: | 1557963 |
Деталь: | DECORATION BELT.LEFT |
Парткод: | 1505729 |
Деталь: | POWER CABLE |
Парткод: | 2121764 |
Коды ошибок
01H
02H
08H
0AH
0BH
0CH
0DH
30H
40H
41H
42H
43H
50H
51H
52H
53H
56H
60H
61H
62H
63H
70H
71H
72H
88H
89H
A0H
D1H
D3H
D4H
EFH
F0H
FAH
FBH
FCH
FEH
Описание
Error code: | 01H |
Description: | ADF PID excess speed (Printer) |
Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
Error code: | 02H |
Description: | ADF PID reverse (Printer) |
Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
Error code: | 08H |
Description: | Main motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the main motor remains energized. • The motor lock signal remains LOW for a predetermined consecutive period of time while the main motor remains deenergized. |
Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam |
Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1. |
Error code: | 0AH |
Description: | Printer: CR load position excess load error |
Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
Error code: | 0BH |
Description: | Ventilation fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the ventilation fan motor remains energized. |
Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive overload (paper jam/foreign object) • Cable disconnection |
Remedy: | 1 Check the FM2 connector for proper connection and correct as necessary. 2 Check FM2 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 FM2 operation check. PRCB PJ10PRCB-1 (REM) PECB PJ10PRCB-3 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1. |
Error code: | 0CH |
Description: | Power supply cooling fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the power supply cooling fan motor remains energized. |
Causes: | An error occurred in the CR motor operating sequence |
Remedy: | 1 Check the FM1 connector for proper connection and correct as necessary. 2 Check FM1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ4PRCB-1 (REM) PRCB PJ4PRCB-3 (LOCK) C-2. 5 Change PRCB. 6 Change DCPU1. |
Error code: | 0DH |
Description: | ADF BS+ excess load error (Scanner/ADF) |
Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive overload (paper jam/foreign object) • Cable disconnection |
Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
Error code: | 30H |
Description: | ADF/Scanner: ADF option error |
Causes: | • Main Board failure |
Remedy: | • Checking the following parts and replace the defective one: • Main Board • Power Supply Board |
Error code: | 40H |
Description: | Printer: Transistor temperature error |
Causes: | • Main Board failure |
Remedy: | • Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC |
Error code: | 41H |
Description: | FB PID excess speed (Printer) |
Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
Remedy: | • Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC |
Error code: | 42H |
Description: | FB PID reverse (Printer) |
Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
Remedy: | • Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC |
Error code: | 43H |
Description: | FB PID lock (Printer) |
Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
Remedy: | • Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC |
Error code: | 50H |
Description: | Printer: Home position error |
Causes: | • Paper jam • Foreign object • Deformation of the Main Frame |
Remedy: | See Remedy for DC error (CR motor) |
Error code: | 51H |
Description: | Printer: Deadlock avoidance error |
Causes: | • Paper jam • Foreign object • Deformation of the Main Frame |
Remedy: | See Remedy for DC error (CR motor) |
Error code: | 52H |
Description: | Printer: Impossible contact detection error |
Causes: | • Paper jam • Foreign object • Deformation of the Main Frame |
Remedy: | See Remedy for DC error (CR motor) |
Error code: | 53H |
Description: | Paper detect error before initial charge completion |
Causes: | An error occurred in the carriage operating sequence. |
Remedy: | See Remedy for DC error (CR motor) |
Error code: | 56H |
Description: | Printer: Contact error at ink replacement timing (Power-off) |
Causes: | • Paper jam • Foreign object • Deformation of the Main Frame |
Remedy: | See Remedy for DC error (CR motor) |
Error code: | 60H |
Description: | Home position (Printer) |
Causes: | • Carriage overload error (paper jam/foreign object) • Ink system failure • CR Motor failure • Deformation of the Main Frame • Deformation of the CR Guide Rail • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Cable disconnection |
Error code: | 61H |
Description: | Printer: PW detector confusion error |
Causes: | • PW Sensor failure • Main Board failure |
Remedy: | • Checking the PW Sensor • Checking the PW Sensor for adhesion of dirt and dust • Checking the connection of the FFC • Making the following adjustments: • PW adjustment • Checking the following parts and replace the defective one: • Head FFC • Carriage Assy • Main Board • Power Supply Board |
Error code: | 62H |
Description: | Hot-plug disconnection paper jam fatal error (Printer) |
Causes: | • 2nd Cassette Unit has been removed during feeding (when the ASF Motor is operating). • Contact failure of the connector which connects 2nd Cassette Unit and the printer |
Remedy: | • Checking the operation of the actuator and the connection of the connector. • Checking the following parts and replace the defective one: • Sensor • Main Board • Power Supply Board |
Error code: | 63H |
Description: | Printer: PE detector error |
Causes: | • PW Sensor failure • Main Board failure |
Remedy: | • Checking the operation of the actuator and the connection of the connector. • Checking the following parts and replace the defective one: • Sensor • Main Board • Power Supply Board |
Error code: | 70H |
Description: | APG error (normal drive error) |
Causes: | An error occurred in the APG operating sequence |
Remedy: | • Checking the installation of the APG Sensor: position of the sensor and connection of the connector (CN7) • Checking the drive of the APG Assy • Installation of the composite gear of the ASF Assy -APG Assy • Standalone operation of the APG Assy • Reinstallation of the APG Assy • Checking the following parts and replace the defective one: • APG Assy • ASF Assy • APG Sensor • PG Left Cam • Main Board • Power Supply Board |
Error code: | 71H |
Description: | APG home seek error |
Causes: | An error occurred in the APG operating sequence |
Remedy: | • Checking the installation of the APG Sensor: position of the sensor and connection of the connector (CN7) • Checking the drive of the APG Assy • Installation of the composite gear of the ASF Assy -APG Assy • Standalone operation of the APG Assy • Reinstallation of the APG Assy • Checking the following parts and replace the defective one: • APG Assy • ASF Assy • APG Sensor • PG Left Cam • Main Board • Power Supply Board |
Error code: | 72H |
Description: | Error in APG drive by factory command |
Causes: | An error occurred in the APG operating sequence |
Remedy: | • Checking the installation of the APG Sensor: position of the sensor and connection of the connector (CN7) • Checking the drive of the APG Assy • Installation of the composite gear of the ASF Assy -APG Assy • Standalone operation of the APG Assy • Reinstallation of the APG Assy • Checking the following parts and replace the defective one: • APG Assy • ASF Assy • APG Sensor • PG Left Cam • Main Board • Power Supply Board |
Error code: | 88H |
Description: | Excessive Light error (Printer) |
Causes: | • PIS failure • Main Board failure • Diffused light |
Remedy: | • Pulling out the CDR Tray • Checking the CDR Tray Sensor • Checking the CDR Tray Sensor for adhesion of dirt or dust • Checking the connection of the connector of the CDR Tray Sensor • Checking the connection of the FFC • Checking the following parts and replace the defective one: • CDR Tray Sensor • CDR Tray |
Error code: | 89H |
Description: | Insufficient Light error (Printer) |
Causes: | • PIS failure (installation posture, contamination) • Fault Detection Plate failure • Main Board failure • Ink cartridge failure |
Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Checking the following parts and replacing the defective one: • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board |
Error code: | A0H |
Description: | Waste ink overflow |
Causes: | Life expiration of maintenance parts |
Remedy: | Replace all the maintenance parts, and clear the maintenance counter. |
Error code: | D1H |
Description: | PN/AL PID excess load error (Printer) |
Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Panel Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
Remedy: | • Checking the mechanism and operation: Check the mechanism and operation of the motor in question. • Checking the connection of the connectors and routing of the lead wires • Checking the motor in question and the following parts and replacing the defective part: • Main Board • Power Supply Board |
Error code: | D3H |
Description: | PN/AL PID reverse error (Printer) |
Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the Panel/Stacker gears • Carriage overload error (paper jam/foreign object) |
Remedy: | • Checking the mechanism and operation: Check the mechanism and operation of the motor in question. • Checking the connection of the connectors and routing of the lead wires • Checking the motor in question and the following parts and replacing the defective part: • Main Board • Power Supply Board |
Error code: | D4H |
Description: | PN/AL PID lock error (Printer) |
Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Panel Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
Remedy: | • Checking the mechanism and operation: Check the mechanism and operation of the motor in question. • Checking the connection of the connectors and routing of the lead wires • Checking the motor in question and the following parts and replacing the defective part: • Main Board • Power Supply Board |
Error code: | EFH |
Description: | CR BS driving time error (Printer) |
Causes: | • Main Board failure |
Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
Error code: | F0H |
Description: | Trouble related to security |
Causes: | An error occurred in the PF motor operating sequence |
Error code: | FAH |
Description: | PF load position excess load error |
Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
Error code: | FBH |
Description: | PF acceleration lock error |
Causes: | An error occurred in the PF motor operating sequence |
Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
Error code: | FCH |
Description: | PF load position error (Printer) |
Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
Error code: | FEH |
Description: | PF PID driving time error |
Causes: | • Main Board failure |
Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |