Epson SC-S30650
Рейтинг
Модули
MECH-021
CASE-011
MECH-051
MECH-012
MECH-031
ACCE-012
MECH-042
MECH-061
ELEC-011
Детали ELEC-011
| Деталь: | ROLLER ASSY.,DRIVEN, ASP |
| Парткод: | 1574085 |
| Деталь: | SCALE,PF ASSY, ASP |
| Парткод: | 1574089 |
| Деталь: | PRINTER,COVER,OPEN ASSY ESL, ASP |
| Парткод: | 1574090 |
| Деталь: | FULL,MAINTENANCE OPEN ASSY ESL, ASP |
| Парткод: | 1574111 |
| Деталь: | INK LOCK,P COVER, HOME,ASSY ESL, ASP |
| Парткод: | 1574091 |
| Деталь: | INK LOCK,MAINTENANCE, HOME,ASSY ESL, ASP |
| Парткод: | 1574112 |
| Деталь: | CARRIAGE ASSY ESL, ASP |
| Парткод: | 1574113 |
| Деталь: | PULLEY, DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BELT,CR |
| Парткод: | 1559657 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 2143464 |
| Деталь: | PRINT HEAD,IA522V-1 |
| Парткод: | FA06010 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | BOARD ASSY.,DETECTOR,PW, B |
| Парткод: | 2109393 |
| Деталь: | HARNESS,CR,ENCODER |
| Парткод: | 2142288 |
| Деталь: | HARNESS,IMS |
| Парткод: | 2142289 |
| Деталь: | HARNESS,PW |
| Парткод: | 2142290 |
| Деталь: | CABLE,SENSOR,PG |
| Парткод: | 2139290 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142881 |
| Деталь: | OIL PAD,ASSY ESL, ASP |
| Парткод: | 1574110 |
| Деталь: | APG,ASSY ESL, ASP |
| Парткод: | 1574092 |
| Деталь: | PRE,HEATER,ASSY ESL, ASP |
| Парткод: | 1574093 |
| Деталь: | LABEL,SET,PRE HEATER |
| Парткод: | 1562879 |
| Деталь: | AFTER,HEATER,ASSY ESL, ASP |
| Парткод: | 1574094 |
| Деталь: | LABEL,SET,AFTER HEATER |
| Парткод: | 1562881 |
| Деталь: | PANEL ASSY ESL, ASP |
| Парткод: | 1574095 |
| Деталь: | POROUS PAD,FLASH BOX,ASSY ESL, ASP |
| Парткод: | 1574116 |
| Деталь: | FLASHING BOX ASSY, ASP |
| Парткод: | 1574102 |
| Деталь: | HOLDER,IC.,ASSY ESL, ASP |
| Парткод: | 1574103 |
| Деталь: | SEAL RUBBER,JOINT.,ASP |
| Парткод: | 1575095 |
| Деталь: | WIPER.,ASSY ESL, ASP |
| Парткод: | 1574117 |
| Деталь: | POROUS PAD, CLEANER,WIPER.,ASSY ESL, ASP |
| Парткод: | 1574118 |
| Деталь: | PUMP,CAP.,ASSY ESL, ASP |
| Парткод: | 1574104 |
| Деталь: | TUBE,INK SUPPLY.,ASSY ESL, ASP |
| Парткод: | 1574105 |
| Деталь: | DUCT,CR.,ASSY ESL, ASP |
| Парткод: | 1574119 |
| Деталь: | HARNESS,HEAD ASSY, ASP |
| Парткод: | 1574106 |
| Деталь: | HARNESS,HEAD ASSY,C, ASP |
| Парткод: | 1574107 |
| Деталь: | SCALE,CR, ASP |
| Парткод: | 1574120 |
| Деталь: | FAN ASSY.,ABSORPTION |
| Парткод: | 2139052 |
| Деталь: | HEATER, PAPER GUIDE,FRONT, ASP |
| Парткод: | 1574122 |
| Деталь: | SEAL,IMS |
| Парткод: | 1559726 |
| Деталь: | CABLE,THERMISTOR |
| Парткод: | 2139305 |
| Деталь: | MOTOR ASSY.,PF, ASP |
| Парткод: | 1574125 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,PF,ENCORDER |
| Парткод: | 2142296 |
| Деталь: | PUSH RIVET,P6060W ASSY, ASP |
| Парткод: | 1574101 |
| Деталь: | HARNESS,SENSOR,PE |
| Парткод: | 2142297 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2139095 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CABLE,MOTOR,APG |
| Парткод: | 2139286 |
| Деталь: | FAN SET.DC, ASP |
| Парткод: | 1574109 |
| Деталь: | JOINT,CAP,B |
| Парткод: | 1532885 |
| Деталь: | COVER,CR |
| Парткод: | 1559635 |
| Деталь: | SPACER,CR, B |
| Парткод: | 1559650 |
| Деталь: | SHEET,GUIDE RAIL,TUBE,LOWER |
| Парткод: | 1559681 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1559690 |
| Деталь: | PAPER PRESSING PLATET |
| Парткод: | 1559725 |
| Деталь: | LABEL,CAUTION,P-COVER,RIGHT |
| Парткод: | 1562843 |
| Деталь: | LABEL,CAUTION,P-COVER,LEFT |
| Парткод: | 1562845 |
| Деталь: | CABLE,RELAY,FRONT,COVER,LEFT |
| Парткод: | 2139279 |
| Деталь: | CABLE,RELAY,MAINTENANCE COVER,LEFT |
| Парткод: | 2139282 |
| Деталь: | HARNESS,PANEL |
| Парткод: | 2142276 |
| Деталь: | HARNESS |
| Парткод: | 2142331 |
| Деталь: | HARNESS,CRCM1 |
| Парткод: | 2142278 |
| Деталь: | CABLE,SENSOR,CR |
| Парткод: | 2139289 |
| Деталь: | HARNESS,CR |
| Парткод: | 2142295 |
| Деталь: | CABLE,RELAY,MOTOR,PF |
| Парткод: | 2139297 |
| Деталь: | CABLE,SENSOR,MANUAL RELEASE |
| Парткод: | 2139302 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2139303 |
| Деталь: | CABLE,RELAY,FAN,B |
| Парткод: | 2139304 |
| Деталь: | CABLE,RELAY,HEATER |
| Парткод: | 2139306 |
| Деталь: | CABLE,RELAY,PLATEN,HEATER |
| Парткод: | 2139307 |
| Деталь: | CABLE,RELAY,HEATER,B |
| Парткод: | 2139308 |
| Деталь: | CABLE,RELAY,THERMISTOR |
| Парткод: | 2139309 |
| Деталь: | CABLE,RELAY,THERMISTOR,B |
| Парткод: | 2139310 |
| Деталь: | CABLE,RELAY,THERMISTOR,C |
| Парткод: | 2139311 |
| Деталь: | HARNESS |
| Парткод: | 2138606 |
| Деталь: | HARNESS |
| Парткод: | 2138607 |
| Деталь: | HARNESS |
| Парткод: | 2138609 |
| Деталь: | HARNESS |
| Парткод: | 2138610 |
| Деталь: | HARNESS |
| Парткод: | 2138611 |
| Деталь: | HARNESS |
| Парткод: | 2138612 |
| Деталь: | HARNESS |
| Парткод: | 2138613 |
| Деталь: | TAPE,HEATER WIRE,FASTEN |
| Парткод: | 1559733 |
| Деталь: | COVER,TOP,LEFT,ASSY, ASP |
| Парткод: | 1574096 |
| Деталь: | COVER,SIDE,RIGHT,UPPER |
| Парткод: | 1552189 |
| Деталь: | COVER,TOP,RIGHT,ASSY, ASP |
| Парткод: | 1574097 |
| Деталь: | COVER,FRONT,RIGHT,64, ASSY, ASP |
| Парткод: | 1574098 |
| Деталь: | COVER,MAINTENANCE,RIGHT,ASSY, ASP |
| Парткод: | 1574099 |
| Деталь: | COVER,MAINTENANCE,LEFT,ASSY, ASP |
| Парткод: | 1574100 |
| Деталь: | COVER SIDE RIGHT DOWN ASSY ESL, ASP |
| Парткод: | 1574114 |
| Деталь: | COVER SIDE LEFT DOWN ASSY ESL, ASP |
| Парткод: | 1574115 |
| Деталь: | COVER FRONT LEFT ASSY ESL ASP |
| Парткод: | 1574268 |
| Деталь: | COVER,TOP,PANEL |
| Парткод: | 1552188 |
| Деталь: | COVER,SIDE,LEFT,UPPER |
| Парткод: | 1552192 |
| Деталь: | COVER,IH |
| Парткод: | 1552909 |
| Деталь: | COVER,MAINTENANCE |
| Парткод: | 1552912 |
| Деталь: | COVER,MAINTENANCE,HEAD |
| Парткод: | 1552914 |
| Деталь: | COVER,PRINTER,SUPPORT,64 |
| Парткод: | 1559808 |
| Деталь: | HOUSING,BASE, SUPPORT,RIGHT |
| Парткод: | 1552191 |
| Деталь: | HOUSING,BASE, SUPPORT,LEFT |
| Парткод: | 1552194 |
| Деталь: | CAP,COVER,TUBE |
| Парткод: | 1552916 |
| Деталь: | KNOB,LEVER |
| Парткод: | 1552177 |
| Деталь: | LABEL,MODEL NAME |
| Парткод: | 1562848 |
| Деталь: | LABEL,PERIODIC MAINTENANCE |
| Парткод: | 1567147 |
| Деталь: | CAP,CR,ADJUST |
| Парткод: | 1560601 |
| Деталь: | BOARD ASSY.,PANEL |
| Парткод: | 2142892 |
| Деталь: | ROLLER ASSY.,DRIVEN, ASP |
| Парткод: | 1574085 |
| Деталь: | SCALE,PF ASSY, ASP |
| Парткод: | 1574089 |
| Деталь: | PRINTER,COVER,OPEN ASSY ESL, ASP |
| Парткод: | 1574090 |
| Деталь: | FULL,MAINTENANCE OPEN ASSY ESL, ASP |
| Парткод: | 1574111 |
| Деталь: | INK LOCK,P COVER, HOME,ASSY ESL, ASP |
| Парткод: | 1574091 |
| Деталь: | INK LOCK,MAINTENANCE, HOME,ASSY ESL, ASP |
| Парткод: | 1574112 |
| Деталь: | CARRIAGE ASSY ESL, ASP |
| Парткод: | 1574113 |
| Деталь: | PULLEY, DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BELT,CR |
| Парткод: | 1559657 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 2143464 |
| Деталь: | PRINT HEAD,IA522V-1 |
| Парткод: | FA06010 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | BOARD ASSY.,DETECTOR,PW, B |
| Парткод: | 2109393 |
| Деталь: | HARNESS,CR,ENCODER |
| Парткод: | 2142288 |
| Деталь: | HARNESS,IMS |
| Парткод: | 2142289 |
| Деталь: | HARNESS,PW |
| Парткод: | 2142290 |
| Деталь: | CABLE,SENSOR,PG |
| Парткод: | 2139290 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142881 |
| Деталь: | OIL PAD,ASSY ESL, ASP |
| Парткод: | 1574110 |
| Деталь: | APG,ASSY ESL, ASP |
| Парткод: | 1574092 |
| Деталь: | PRE,HEATER,ASSY ESL, ASP |
| Парткод: | 1574093 |
| Деталь: | LABEL,SET,PRE HEATER |
| Парткод: | 1562879 |
| Деталь: | AFTER,HEATER,ASSY ESL, ASP |
| Парткод: | 1574094 |
| Деталь: | LABEL,SET,AFTER HEATER |
| Парткод: | 1562881 |
| Деталь: | PANEL ASSY ESL, ASP |
| Парткод: | 1574095 |
| Деталь: | POROUS PAD,FLASH BOX,ASSY ESL, ASP |
| Парткод: | 1574116 |
| Деталь: | FLASHING BOX ASSY, ASP |
| Парткод: | 1574102 |
| Деталь: | HOLDER,IC.,ASSY ESL, ASP |
| Парткод: | 1574103 |
| Деталь: | SEAL RUBBER,JOINT.,ASP |
| Парткод: | 1575095 |
| Деталь: | WIPER.,ASSY ESL, ASP |
| Парткод: | 1574117 |
| Деталь: | POROUS PAD, CLEANER,WIPER.,ASSY ESL, ASP |
| Парткод: | 1574118 |
| Деталь: | PUMP,CAP.,ASSY ESL, ASP |
| Парткод: | 1574104 |
| Деталь: | TUBE,INK SUPPLY.,ASSY ESL, ASP |
| Парткод: | 1574105 |
| Деталь: | DUCT,CR.,ASSY ESL, ASP |
| Парткод: | 1574119 |
| Деталь: | HARNESS,HEAD ASSY, ASP |
| Парткод: | 1574106 |
| Деталь: | HARNESS,HEAD ASSY,C, ASP |
| Парткод: | 1574107 |
| Деталь: | SCALE,CR, ASP |
| Парткод: | 1574120 |
| Деталь: | FAN ASSY.,ABSORPTION |
| Парткод: | 2139052 |
| Деталь: | HEATER, PAPER GUIDE,FRONT, ASP |
| Парткод: | 1574122 |
| Деталь: | SEAL,IMS |
| Парткод: | 1559726 |
| Деталь: | CABLE,THERMISTOR |
| Парткод: | 2139305 |
| Деталь: | MOTOR ASSY.,PF, ASP |
| Парткод: | 1574125 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,PF,ENCORDER |
| Парткод: | 2142296 |
| Деталь: | PUSH RIVET,P6060W ASSY, ASP |
| Парткод: | 1574101 |
| Деталь: | HARNESS,SENSOR,PE |
| Парткод: | 2142297 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2139095 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CABLE,MOTOR,APG |
| Парткод: | 2139286 |
| Деталь: | FAN SET.DC, ASP |
| Парткод: | 1574109 |
| Деталь: | JOINT,CAP,B |
| Парткод: | 1532885 |
| Деталь: | COVER,CR |
| Парткод: | 1559635 |
| Деталь: | SPACER,CR, B |
| Парткод: | 1559650 |
| Деталь: | SHEET,GUIDE RAIL,TUBE,LOWER |
| Парткод: | 1559681 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1559690 |
| Деталь: | PAPER PRESSING PLATET |
| Парткод: | 1559725 |
| Деталь: | LABEL,CAUTION,P-COVER,RIGHT |
| Парткод: | 1562843 |
| Деталь: | LABEL,CAUTION,P-COVER,LEFT |
| Парткод: | 1562845 |
| Деталь: | CABLE,RELAY,FRONT,COVER,LEFT |
| Парткод: | 2139279 |
| Деталь: | CABLE,RELAY,MAINTENANCE COVER,LEFT |
| Парткод: | 2139282 |
| Деталь: | HARNESS,PANEL |
| Парткод: | 2142276 |
| Деталь: | HARNESS |
| Парткод: | 2142331 |
| Деталь: | HARNESS,CRCM1 |
| Парткод: | 2142278 |
| Деталь: | CABLE,SENSOR,CR |
| Парткод: | 2139289 |
| Деталь: | HARNESS,CR |
| Парткод: | 2142295 |
| Деталь: | CABLE,RELAY,MOTOR,PF |
| Парткод: | 2139297 |
| Деталь: | CABLE,SENSOR,MANUAL RELEASE |
| Парткод: | 2139302 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2139303 |
| Деталь: | CABLE,RELAY,FAN,B |
| Парткод: | 2139304 |
| Деталь: | CABLE,RELAY,HEATER |
| Парткод: | 2139306 |
| Деталь: | CABLE,RELAY,PLATEN,HEATER |
| Парткод: | 2139307 |
| Деталь: | CABLE,RELAY,HEATER,B |
| Парткод: | 2139308 |
| Деталь: | CABLE,RELAY,THERMISTOR |
| Парткод: | 2139309 |
| Деталь: | CABLE,RELAY,THERMISTOR,B |
| Парткод: | 2139310 |
| Деталь: | CABLE,RELAY,THERMISTOR,C |
| Парткод: | 2139311 |
| Деталь: | HARNESS |
| Парткод: | 2138606 |
| Деталь: | HARNESS |
| Парткод: | 2138607 |
| Деталь: | HARNESS |
| Парткод: | 2138609 |
| Деталь: | HARNESS |
| Парткод: | 2138610 |
| Деталь: | HARNESS |
| Парткод: | 2138611 |
| Деталь: | HARNESS |
| Парткод: | 2138612 |
| Деталь: | HARNESS |
| Парткод: | 2138613 |
| Деталь: | TAPE,HEATER WIRE,FASTEN |
| Парткод: | 1559733 |
| Деталь: | ROLLER ASSY.,DRIVEN, ASP |
| Парткод: | 1574085 |
| Деталь: | SCALE,PF ASSY, ASP |
| Парткод: | 1574089 |
| Деталь: | PRINTER,COVER,OPEN ASSY ESL, ASP |
| Парткод: | 1574090 |
| Деталь: | FULL,MAINTENANCE OPEN ASSY ESL, ASP |
| Парткод: | 1574111 |
| Деталь: | INK LOCK,P COVER, HOME,ASSY ESL, ASP |
| Парткод: | 1574091 |
| Деталь: | INK LOCK,MAINTENANCE, HOME,ASSY ESL, ASP |
| Парткод: | 1574112 |
| Деталь: | CARRIAGE ASSY ESL, ASP |
| Парткод: | 1574113 |
| Деталь: | PULLEY, DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BELT,CR |
| Парткод: | 1559657 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 2143464 |
| Деталь: | PRINT HEAD,IA522V-1 |
| Парткод: | FA06010 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | BOARD ASSY.,DETECTOR,PW, B |
| Парткод: | 2109393 |
| Деталь: | HARNESS,CR,ENCODER |
| Парткод: | 2142288 |
| Деталь: | HARNESS,IMS |
| Парткод: | 2142289 |
| Деталь: | HARNESS,PW |
| Парткод: | 2142290 |
| Деталь: | CABLE,SENSOR,PG |
| Парткод: | 2139290 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142881 |
| Деталь: | OIL PAD,ASSY ESL, ASP |
| Парткод: | 1574110 |
| Деталь: | APG,ASSY ESL, ASP |
| Парткод: | 1574092 |
| Деталь: | PRE,HEATER,ASSY ESL, ASP |
| Парткод: | 1574093 |
| Деталь: | LABEL,SET,PRE HEATER |
| Парткод: | 1562879 |
| Деталь: | AFTER,HEATER,ASSY ESL, ASP |
| Парткод: | 1574094 |
| Деталь: | LABEL,SET,AFTER HEATER |
| Парткод: | 1562881 |
| Деталь: | PANEL ASSY ESL, ASP |
| Парткод: | 1574095 |
| Деталь: | POROUS PAD,FLASH BOX,ASSY ESL, ASP |
| Парткод: | 1574116 |
| Деталь: | FLASHING BOX ASSY, ASP |
| Парткод: | 1574102 |
| Деталь: | HOLDER,IC.,ASSY ESL, ASP |
| Парткод: | 1574103 |
| Деталь: | SEAL RUBBER,JOINT.,ASP |
| Парткод: | 1575095 |
| Деталь: | WIPER.,ASSY ESL, ASP |
| Парткод: | 1574117 |
| Деталь: | POROUS PAD, CLEANER,WIPER.,ASSY ESL, ASP |
| Парткод: | 1574118 |
| Деталь: | PUMP,CAP.,ASSY ESL, ASP |
| Парткод: | 1574104 |
| Деталь: | TUBE,INK SUPPLY.,ASSY ESL, ASP |
| Парткод: | 1574105 |
| Деталь: | DUCT,CR.,ASSY ESL, ASP |
| Парткод: | 1574119 |
| Деталь: | HARNESS,HEAD ASSY, ASP |
| Парткод: | 1574106 |
| Деталь: | HARNESS,HEAD ASSY,C, ASP |
| Парткод: | 1574107 |
| Деталь: | SCALE,CR, ASP |
| Парткод: | 1574120 |
| Деталь: | FAN ASSY.,ABSORPTION |
| Парткод: | 2139052 |
| Деталь: | HEATER, PAPER GUIDE,FRONT, ASP |
| Парткод: | 1574122 |
| Деталь: | SEAL,IMS |
| Парткод: | 1559726 |
| Деталь: | CABLE,THERMISTOR |
| Парткод: | 2139305 |
| Деталь: | MOTOR ASSY.,PF, ASP |
| Парткод: | 1574125 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,PF,ENCORDER |
| Парткод: | 2142296 |
| Деталь: | PUSH RIVET,P6060W ASSY, ASP |
| Парткод: | 1574101 |
| Деталь: | HARNESS,SENSOR,PE |
| Парткод: | 2142297 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2139095 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CABLE,MOTOR,APG |
| Парткод: | 2139286 |
| Деталь: | FAN SET.DC, ASP |
| Парткод: | 1574109 |
| Деталь: | JOINT,CAP,B |
| Парткод: | 1532885 |
| Деталь: | COVER,CR |
| Парткод: | 1559635 |
| Деталь: | SPACER,CR, B |
| Парткод: | 1559650 |
| Деталь: | SHEET,GUIDE RAIL,TUBE,LOWER |
| Парткод: | 1559681 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1559690 |
| Деталь: | PAPER PRESSING PLATET |
| Парткод: | 1559725 |
| Деталь: | LABEL,CAUTION,P-COVER,RIGHT |
| Парткод: | 1562843 |
| Деталь: | LABEL,CAUTION,P-COVER,LEFT |
| Парткод: | 1562845 |
| Деталь: | CABLE,RELAY,FRONT,COVER,LEFT |
| Парткод: | 2139279 |
| Деталь: | CABLE,RELAY,MAINTENANCE COVER,LEFT |
| Парткод: | 2139282 |
| Деталь: | HARNESS,PANEL |
| Парткод: | 2142276 |
| Деталь: | HARNESS |
| Парткод: | 2142331 |
| Деталь: | HARNESS,CRCM1 |
| Парткод: | 2142278 |
| Деталь: | CABLE,SENSOR,CR |
| Парткод: | 2139289 |
| Деталь: | HARNESS,CR |
| Парткод: | 2142295 |
| Деталь: | CABLE,RELAY,MOTOR,PF |
| Парткод: | 2139297 |
| Деталь: | CABLE,SENSOR,MANUAL RELEASE |
| Парткод: | 2139302 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2139303 |
| Деталь: | CABLE,RELAY,FAN,B |
| Парткод: | 2139304 |
| Деталь: | CABLE,RELAY,HEATER |
| Парткод: | 2139306 |
| Деталь: | CABLE,RELAY,PLATEN,HEATER |
| Парткод: | 2139307 |
| Деталь: | CABLE,RELAY,HEATER,B |
| Парткод: | 2139308 |
| Деталь: | CABLE,RELAY,THERMISTOR |
| Парткод: | 2139309 |
| Деталь: | CABLE,RELAY,THERMISTOR,B |
| Парткод: | 2139310 |
| Деталь: | CABLE,RELAY,THERMISTOR,C |
| Парткод: | 2139311 |
| Деталь: | HARNESS |
| Парткод: | 2138606 |
| Деталь: | HARNESS |
| Парткод: | 2138607 |
| Деталь: | HARNESS |
| Парткод: | 2138609 |
| Деталь: | HARNESS |
| Парткод: | 2138610 |
| Деталь: | HARNESS |
| Парткод: | 2138611 |
| Деталь: | HARNESS |
| Парткод: | 2138612 |
| Деталь: | HARNESS |
| Парткод: | 2138613 |
| Деталь: | TAPE,HEATER WIRE,FASTEN |
| Парткод: | 1559733 |
| Деталь: | ROLLER ASSY.,DRIVEN, ASP |
| Парткод: | 1574085 |
| Деталь: | SCALE,PF ASSY, ASP |
| Парткод: | 1574089 |
| Деталь: | PRINTER,COVER,OPEN ASSY ESL, ASP |
| Парткод: | 1574090 |
| Деталь: | FULL,MAINTENANCE OPEN ASSY ESL, ASP |
| Парткод: | 1574111 |
| Деталь: | INK LOCK,P COVER, HOME,ASSY ESL, ASP |
| Парткод: | 1574091 |
| Деталь: | INK LOCK,MAINTENANCE, HOME,ASSY ESL, ASP |
| Парткод: | 1574112 |
| Деталь: | CARRIAGE ASSY ESL, ASP |
| Парткод: | 1574113 |
| Деталь: | PULLEY, DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BELT,CR |
| Парткод: | 1559657 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 2143464 |
| Деталь: | PRINT HEAD,IA522V-1 |
| Парткод: | FA06010 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | BOARD ASSY.,DETECTOR,PW, B |
| Парткод: | 2109393 |
| Деталь: | HARNESS,CR,ENCODER |
| Парткод: | 2142288 |
| Деталь: | HARNESS,IMS |
| Парткод: | 2142289 |
| Деталь: | HARNESS,PW |
| Парткод: | 2142290 |
| Деталь: | CABLE,SENSOR,PG |
| Парткод: | 2139290 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142881 |
| Деталь: | OIL PAD,ASSY ESL, ASP |
| Парткод: | 1574110 |
| Деталь: | APG,ASSY ESL, ASP |
| Парткод: | 1574092 |
| Деталь: | PRE,HEATER,ASSY ESL, ASP |
| Парткод: | 1574093 |
| Деталь: | LABEL,SET,PRE HEATER |
| Парткод: | 1562879 |
| Деталь: | AFTER,HEATER,ASSY ESL, ASP |
| Парткод: | 1574094 |
| Деталь: | LABEL,SET,AFTER HEATER |
| Парткод: | 1562881 |
| Деталь: | PANEL ASSY ESL, ASP |
| Парткод: | 1574095 |
| Деталь: | POROUS PAD,FLASH BOX,ASSY ESL, ASP |
| Парткод: | 1574116 |
| Деталь: | FLASHING BOX ASSY, ASP |
| Парткод: | 1574102 |
| Деталь: | HOLDER,IC.,ASSY ESL, ASP |
| Парткод: | 1574103 |
| Деталь: | SEAL RUBBER,JOINT.,ASP |
| Парткод: | 1575095 |
| Деталь: | WIPER.,ASSY ESL, ASP |
| Парткод: | 1574117 |
| Деталь: | POROUS PAD, CLEANER,WIPER.,ASSY ESL, ASP |
| Парткод: | 1574118 |
| Деталь: | PUMP,CAP.,ASSY ESL, ASP |
| Парткод: | 1574104 |
| Деталь: | TUBE,INK SUPPLY.,ASSY ESL, ASP |
| Парткод: | 1574105 |
| Деталь: | DUCT,CR.,ASSY ESL, ASP |
| Парткод: | 1574119 |
| Деталь: | HARNESS,HEAD ASSY, ASP |
| Парткод: | 1574106 |
| Деталь: | HARNESS,HEAD ASSY,C, ASP |
| Парткод: | 1574107 |
| Деталь: | SCALE,CR, ASP |
| Парткод: | 1574120 |
| Деталь: | FAN ASSY.,ABSORPTION |
| Парткод: | 2139052 |
| Деталь: | HEATER, PAPER GUIDE,FRONT, ASP |
| Парткод: | 1574122 |
| Деталь: | SEAL,IMS |
| Парткод: | 1559726 |
| Деталь: | CABLE,THERMISTOR |
| Парткод: | 2139305 |
| Деталь: | MOTOR ASSY.,PF, ASP |
| Парткод: | 1574125 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,PF,ENCORDER |
| Парткод: | 2142296 |
| Деталь: | PUSH RIVET,P6060W ASSY, ASP |
| Парткод: | 1574101 |
| Деталь: | HARNESS,SENSOR,PE |
| Парткод: | 2142297 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2139095 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CABLE,MOTOR,APG |
| Парткод: | 2139286 |
| Деталь: | FAN SET.DC, ASP |
| Парткод: | 1574109 |
| Деталь: | JOINT,CAP,B |
| Парткод: | 1532885 |
| Деталь: | COVER,CR |
| Парткод: | 1559635 |
| Деталь: | SPACER,CR, B |
| Парткод: | 1559650 |
| Деталь: | SHEET,GUIDE RAIL,TUBE,LOWER |
| Парткод: | 1559681 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1559690 |
| Деталь: | PAPER PRESSING PLATET |
| Парткод: | 1559725 |
| Деталь: | LABEL,CAUTION,P-COVER,RIGHT |
| Парткод: | 1562843 |
| Деталь: | LABEL,CAUTION,P-COVER,LEFT |
| Парткод: | 1562845 |
| Деталь: | CABLE,RELAY,FRONT,COVER,LEFT |
| Парткод: | 2139279 |
| Деталь: | CABLE,RELAY,MAINTENANCE COVER,LEFT |
| Парткод: | 2139282 |
| Деталь: | HARNESS,PANEL |
| Парткод: | 2142276 |
| Деталь: | HARNESS |
| Парткод: | 2142331 |
| Деталь: | HARNESS,CRCM1 |
| Парткод: | 2142278 |
| Деталь: | CABLE,SENSOR,CR |
| Парткод: | 2139289 |
| Деталь: | HARNESS,CR |
| Парткод: | 2142295 |
| Деталь: | CABLE,RELAY,MOTOR,PF |
| Парткод: | 2139297 |
| Деталь: | CABLE,SENSOR,MANUAL RELEASE |
| Парткод: | 2139302 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2139303 |
| Деталь: | CABLE,RELAY,FAN,B |
| Парткод: | 2139304 |
| Деталь: | CABLE,RELAY,HEATER |
| Парткод: | 2139306 |
| Деталь: | CABLE,RELAY,PLATEN,HEATER |
| Парткод: | 2139307 |
| Деталь: | CABLE,RELAY,HEATER,B |
| Парткод: | 2139308 |
| Деталь: | CABLE,RELAY,THERMISTOR |
| Парткод: | 2139309 |
| Деталь: | CABLE,RELAY,THERMISTOR,B |
| Парткод: | 2139310 |
| Деталь: | CABLE,RELAY,THERMISTOR,C |
| Парткод: | 2139311 |
| Деталь: | HARNESS |
| Парткод: | 2138606 |
| Деталь: | HARNESS |
| Парткод: | 2138607 |
| Деталь: | HARNESS |
| Парткод: | 2138609 |
| Деталь: | HARNESS |
| Парткод: | 2138610 |
| Деталь: | HARNESS |
| Парткод: | 2138611 |
| Деталь: | HARNESS |
| Парткод: | 2138612 |
| Деталь: | HARNESS |
| Парткод: | 2138613 |
| Деталь: | TAPE,HEATER WIRE,FASTEN |
| Парткод: | 1559733 |
| Деталь: | SCREW ASSY,ASP |
| Парткод: | 1574108 |
| Деталь: | ADJUSTER ASSY. |
| Парткод: | 1559573 |
| Деталь: | CASTER,P60HG |
| Парткод: | 1560663 |
| Деталь: | CASTER,P60HGS |
| Парткод: | 1560664 |
| Деталь: | STAND,TOP,RIGHT |
| Парткод: | 1559796 |
| Деталь: | STAND,TOP,LEFT |
| Парткод: | 1559800 |
| Деталь: | STAND,LEFT ASSY ESL ASP |
| Парткод: | 1583757 |
| Деталь: | STAND,RIGHT ASSY ESL ASP |
| Парткод: | 1583759 |
| Деталь: | CLEANING STICK,(B)ASP |
| Парткод: | 1575096 |
| Деталь: | CLEANING STICK.,ASP |
| Парткод: | 1575099 |
| Деталь: | INK CART.BOXED,BK,PIGT,1460,T687,700,AS |
| Парткод: | 1580369 |
| Деталь: | INK CART.BOXED,C,PIGT,1460,T687,700,AS |
| Парткод: | 1580370 |
| Деталь: | INK CART.BOXED,M,PIGT,1460,T687,700,AS |
| Парткод: | 1580371 |
| Деталь: | INK CART.BOXED,Y,PIGT,1460,T687,700,AS |
| Парткод: | 1580372 |
| Деталь: | GREASE,G-81 |
| Парткод: | 1574337 |
| Деталь: | ROLLER ASSY.,DRIVEN, ASP |
| Парткод: | 1574085 |
| Деталь: | SCALE,PF ASSY, ASP |
| Парткод: | 1574089 |
| Деталь: | PRINTER,COVER,OPEN ASSY ESL, ASP |
| Парткод: | 1574090 |
| Деталь: | FULL,MAINTENANCE OPEN ASSY ESL, ASP |
| Парткод: | 1574111 |
| Деталь: | INK LOCK,P COVER, HOME,ASSY ESL, ASP |
| Парткод: | 1574091 |
| Деталь: | INK LOCK,MAINTENANCE, HOME,ASSY ESL, ASP |
| Парткод: | 1574112 |
| Деталь: | CARRIAGE ASSY ESL, ASP |
| Парткод: | 1574113 |
| Деталь: | PULLEY, DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BELT,CR |
| Парткод: | 1559657 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 2143464 |
| Деталь: | PRINT HEAD,IA522V-1 |
| Парткод: | FA06010 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | BOARD ASSY.,DETECTOR,PW, B |
| Парткод: | 2109393 |
| Деталь: | HARNESS,CR,ENCODER |
| Парткод: | 2142288 |
| Деталь: | HARNESS,IMS |
| Парткод: | 2142289 |
| Деталь: | HARNESS,PW |
| Парткод: | 2142290 |
| Деталь: | CABLE,SENSOR,PG |
| Парткод: | 2139290 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142881 |
| Деталь: | OIL PAD,ASSY ESL, ASP |
| Парткод: | 1574110 |
| Деталь: | APG,ASSY ESL, ASP |
| Парткод: | 1574092 |
| Деталь: | PRE,HEATER,ASSY ESL, ASP |
| Парткод: | 1574093 |
| Деталь: | LABEL,SET,PRE HEATER |
| Парткод: | 1562879 |
| Деталь: | AFTER,HEATER,ASSY ESL, ASP |
| Парткод: | 1574094 |
| Деталь: | LABEL,SET,AFTER HEATER |
| Парткод: | 1562881 |
| Деталь: | PANEL ASSY ESL, ASP |
| Парткод: | 1574095 |
| Деталь: | POROUS PAD,FLASH BOX,ASSY ESL, ASP |
| Парткод: | 1574116 |
| Деталь: | FLASHING BOX ASSY, ASP |
| Парткод: | 1574102 |
| Деталь: | HOLDER,IC.,ASSY ESL, ASP |
| Парткод: | 1574103 |
| Деталь: | SEAL RUBBER,JOINT.,ASP |
| Парткод: | 1575095 |
| Деталь: | WIPER.,ASSY ESL, ASP |
| Парткод: | 1574117 |
| Деталь: | POROUS PAD, CLEANER,WIPER.,ASSY ESL, ASP |
| Парткод: | 1574118 |
| Деталь: | PUMP,CAP.,ASSY ESL, ASP |
| Парткод: | 1574104 |
| Деталь: | TUBE,INK SUPPLY.,ASSY ESL, ASP |
| Парткод: | 1574105 |
| Деталь: | DUCT,CR.,ASSY ESL, ASP |
| Парткод: | 1574119 |
| Деталь: | HARNESS,HEAD ASSY, ASP |
| Парткод: | 1574106 |
| Деталь: | HARNESS,HEAD ASSY,C, ASP |
| Парткод: | 1574107 |
| Деталь: | SCALE,CR, ASP |
| Парткод: | 1574120 |
| Деталь: | FAN ASSY.,ABSORPTION |
| Парткод: | 2139052 |
| Деталь: | HEATER, PAPER GUIDE,FRONT, ASP |
| Парткод: | 1574122 |
| Деталь: | SEAL,IMS |
| Парткод: | 1559726 |
| Деталь: | CABLE,THERMISTOR |
| Парткод: | 2139305 |
| Деталь: | MOTOR ASSY.,PF, ASP |
| Парткод: | 1574125 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,PF,ENCORDER |
| Парткод: | 2142296 |
| Деталь: | PUSH RIVET,P6060W ASSY, ASP |
| Парткод: | 1574101 |
| Деталь: | HARNESS,SENSOR,PE |
| Парткод: | 2142297 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2139095 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CABLE,MOTOR,APG |
| Парткод: | 2139286 |
| Деталь: | FAN SET.DC, ASP |
| Парткод: | 1574109 |
| Деталь: | JOINT,CAP,B |
| Парткод: | 1532885 |
| Деталь: | COVER,CR |
| Парткод: | 1559635 |
| Деталь: | SPACER,CR, B |
| Парткод: | 1559650 |
| Деталь: | SHEET,GUIDE RAIL,TUBE,LOWER |
| Парткод: | 1559681 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1559690 |
| Деталь: | PAPER PRESSING PLATET |
| Парткод: | 1559725 |
| Деталь: | LABEL,CAUTION,P-COVER,RIGHT |
| Парткод: | 1562843 |
| Деталь: | LABEL,CAUTION,P-COVER,LEFT |
| Парткод: | 1562845 |
| Деталь: | CABLE,RELAY,FRONT,COVER,LEFT |
| Парткод: | 2139279 |
| Деталь: | CABLE,RELAY,MAINTENANCE COVER,LEFT |
| Парткод: | 2139282 |
| Деталь: | HARNESS,PANEL |
| Парткод: | 2142276 |
| Деталь: | HARNESS |
| Парткод: | 2142331 |
| Деталь: | HARNESS,CRCM1 |
| Парткод: | 2142278 |
| Деталь: | CABLE,SENSOR,CR |
| Парткод: | 2139289 |
| Деталь: | HARNESS,CR |
| Парткод: | 2142295 |
| Деталь: | CABLE,RELAY,MOTOR,PF |
| Парткод: | 2139297 |
| Деталь: | CABLE,SENSOR,MANUAL RELEASE |
| Парткод: | 2139302 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2139303 |
| Деталь: | CABLE,RELAY,FAN,B |
| Парткод: | 2139304 |
| Деталь: | CABLE,RELAY,HEATER |
| Парткод: | 2139306 |
| Деталь: | CABLE,RELAY,PLATEN,HEATER |
| Парткод: | 2139307 |
| Деталь: | CABLE,RELAY,HEATER,B |
| Парткод: | 2139308 |
| Деталь: | CABLE,RELAY,THERMISTOR |
| Парткод: | 2139309 |
| Деталь: | CABLE,RELAY,THERMISTOR,B |
| Парткод: | 2139310 |
| Деталь: | CABLE,RELAY,THERMISTOR,C |
| Парткод: | 2139311 |
| Деталь: | HARNESS |
| Парткод: | 2138606 |
| Деталь: | HARNESS |
| Парткод: | 2138607 |
| Деталь: | HARNESS |
| Парткод: | 2138609 |
| Деталь: | HARNESS |
| Парткод: | 2138610 |
| Деталь: | HARNESS |
| Парткод: | 2138611 |
| Деталь: | HARNESS |
| Парткод: | 2138612 |
| Деталь: | HARNESS |
| Парткод: | 2138613 |
| Деталь: | TAPE,HEATER WIRE,FASTEN |
| Парткод: | 1559733 |
| Деталь: | ROLLER ASSY.,DRIVEN, ASP |
| Парткод: | 1574085 |
| Деталь: | SCALE,PF ASSY, ASP |
| Парткод: | 1574089 |
| Деталь: | PRINTER,COVER,OPEN ASSY ESL, ASP |
| Парткод: | 1574090 |
| Деталь: | FULL,MAINTENANCE OPEN ASSY ESL, ASP |
| Парткод: | 1574111 |
| Деталь: | INK LOCK,P COVER, HOME,ASSY ESL, ASP |
| Парткод: | 1574091 |
| Деталь: | INK LOCK,MAINTENANCE, HOME,ASSY ESL, ASP |
| Парткод: | 1574112 |
| Деталь: | CARRIAGE ASSY ESL, ASP |
| Парткод: | 1574113 |
| Деталь: | PULLEY, DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BELT,CR |
| Парткод: | 1559657 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 2143464 |
| Деталь: | PRINT HEAD,IA522V-1 |
| Парткод: | FA06010 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | BOARD ASSY.,DETECTOR,PW, B |
| Парткод: | 2109393 |
| Деталь: | HARNESS,CR,ENCODER |
| Парткод: | 2142288 |
| Деталь: | HARNESS,IMS |
| Парткод: | 2142289 |
| Деталь: | HARNESS,PW |
| Парткод: | 2142290 |
| Деталь: | CABLE,SENSOR,PG |
| Парткод: | 2139290 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142881 |
| Деталь: | OIL PAD,ASSY ESL, ASP |
| Парткод: | 1574110 |
| Деталь: | APG,ASSY ESL, ASP |
| Парткод: | 1574092 |
| Деталь: | PRE,HEATER,ASSY ESL, ASP |
| Парткод: | 1574093 |
| Деталь: | LABEL,SET,PRE HEATER |
| Парткод: | 1562879 |
| Деталь: | AFTER,HEATER,ASSY ESL, ASP |
| Парткод: | 1574094 |
| Деталь: | LABEL,SET,AFTER HEATER |
| Парткод: | 1562881 |
| Деталь: | PANEL ASSY ESL, ASP |
| Парткод: | 1574095 |
| Деталь: | POROUS PAD,FLASH BOX,ASSY ESL, ASP |
| Парткод: | 1574116 |
| Деталь: | FLASHING BOX ASSY, ASP |
| Парткод: | 1574102 |
| Деталь: | HOLDER,IC.,ASSY ESL, ASP |
| Парткод: | 1574103 |
| Деталь: | SEAL RUBBER,JOINT.,ASP |
| Парткод: | 1575095 |
| Деталь: | WIPER.,ASSY ESL, ASP |
| Парткод: | 1574117 |
| Деталь: | POROUS PAD, CLEANER,WIPER.,ASSY ESL, ASP |
| Парткод: | 1574118 |
| Деталь: | PUMP,CAP.,ASSY ESL, ASP |
| Парткод: | 1574104 |
| Деталь: | TUBE,INK SUPPLY.,ASSY ESL, ASP |
| Парткод: | 1574105 |
| Деталь: | DUCT,CR.,ASSY ESL, ASP |
| Парткод: | 1574119 |
| Деталь: | HARNESS,HEAD ASSY, ASP |
| Парткод: | 1574106 |
| Деталь: | HARNESS,HEAD ASSY,C, ASP |
| Парткод: | 1574107 |
| Деталь: | SCALE,CR, ASP |
| Парткод: | 1574120 |
| Деталь: | FAN ASSY.,ABSORPTION |
| Парткод: | 2139052 |
| Деталь: | HEATER, PAPER GUIDE,FRONT, ASP |
| Парткод: | 1574122 |
| Деталь: | SEAL,IMS |
| Парткод: | 1559726 |
| Деталь: | CABLE,THERMISTOR |
| Парткод: | 2139305 |
| Деталь: | MOTOR ASSY.,PF, ASP |
| Парткод: | 1574125 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,PF,ENCORDER |
| Парткод: | 2142296 |
| Деталь: | PUSH RIVET,P6060W ASSY, ASP |
| Парткод: | 1574101 |
| Деталь: | HARNESS,SENSOR,PE |
| Парткод: | 2142297 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2139095 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CABLE,MOTOR,APG |
| Парткод: | 2139286 |
| Деталь: | FAN SET.DC, ASP |
| Парткод: | 1574109 |
| Деталь: | JOINT,CAP,B |
| Парткод: | 1532885 |
| Деталь: | COVER,CR |
| Парткод: | 1559635 |
| Деталь: | SPACER,CR, B |
| Парткод: | 1559650 |
| Деталь: | SHEET,GUIDE RAIL,TUBE,LOWER |
| Парткод: | 1559681 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1559690 |
| Деталь: | PAPER PRESSING PLATET |
| Парткод: | 1559725 |
| Деталь: | LABEL,CAUTION,P-COVER,RIGHT |
| Парткод: | 1562843 |
| Деталь: | LABEL,CAUTION,P-COVER,LEFT |
| Парткод: | 1562845 |
| Деталь: | CABLE,RELAY,FRONT,COVER,LEFT |
| Парткод: | 2139279 |
| Деталь: | CABLE,RELAY,MAINTENANCE COVER,LEFT |
| Парткод: | 2139282 |
| Деталь: | HARNESS,PANEL |
| Парткод: | 2142276 |
| Деталь: | HARNESS |
| Парткод: | 2142331 |
| Деталь: | HARNESS,CRCM1 |
| Парткод: | 2142278 |
| Деталь: | CABLE,SENSOR,CR |
| Парткод: | 2139289 |
| Деталь: | HARNESS,CR |
| Парткод: | 2142295 |
| Деталь: | CABLE,RELAY,MOTOR,PF |
| Парткод: | 2139297 |
| Деталь: | CABLE,SENSOR,MANUAL RELEASE |
| Парткод: | 2139302 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2139303 |
| Деталь: | CABLE,RELAY,FAN,B |
| Парткод: | 2139304 |
| Деталь: | CABLE,RELAY,HEATER |
| Парткод: | 2139306 |
| Деталь: | CABLE,RELAY,PLATEN,HEATER |
| Парткод: | 2139307 |
| Деталь: | CABLE,RELAY,HEATER,B |
| Парткод: | 2139308 |
| Деталь: | CABLE,RELAY,THERMISTOR |
| Парткод: | 2139309 |
| Деталь: | CABLE,RELAY,THERMISTOR,B |
| Парткод: | 2139310 |
| Деталь: | CABLE,RELAY,THERMISTOR,C |
| Парткод: | 2139311 |
| Деталь: | HARNESS |
| Парткод: | 2138606 |
| Деталь: | HARNESS |
| Парткод: | 2138607 |
| Деталь: | HARNESS |
| Парткод: | 2138609 |
| Деталь: | HARNESS |
| Парткод: | 2138610 |
| Деталь: | HARNESS |
| Парткод: | 2138611 |
| Деталь: | HARNESS |
| Парткод: | 2138612 |
| Деталь: | HARNESS |
| Парткод: | 2138613 |
| Деталь: | TAPE,HEATER WIRE,FASTEN |
| Парткод: | 1559733 |
| Деталь: | HARNESS |
| Парткод: | 2130944 |
| Деталь: | HARNESS |
| Парткод: | 2138619 |
| Деталь: | HARNESS |
| Парткод: | 2130945 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2142890 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2142891 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142883 |
| Деталь: | HARNESS |
| Парткод: | 2138603 |
| Деталь: | HARNESS |
| Парткод: | 2138604 |
| Деталь: | HARNESS |
| Парткод: | 2138605 |
| Деталь: | HARNESS |
| Парткод: | 2138621 |
| Деталь: | BOARD ASSY.,POWER SUPPLY |
| Парткод: | 2142888 |
| Деталь: | HARNESS |
| Парткод: | 2138596 |
| Деталь: | HARNESS |
| Парткод: | 2138598 |
| Деталь: | HARNESS |
| Парткод: | 2138614 |
| Деталь: | HARNESS |
| Парткод: | 2138618 |
| Деталь: | HARNESS |
| Парткод: | 2138620 |
| Деталь: | HARNESS |
| Парткод: | 2138622 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142882 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2142879 |
| Деталь: | FAN SET. DC (PROPELLER TYPE) |
| Парткод: | 2139319 |
| Деталь: | BOARD ASSY.,PANEL |
| Парткод: | 2142892 |
Коды ошибок
1101
1125
1138
1139
113A
113B
113C
113D
113E
113F
1229
122A
122D
122E
122F
131B
1411
1418
1419
141A
141B
141C
141D
141E
141F
1431
1432
1434
1435
150C
1519
151A
151B
151C
151D
151E
151F
1599
159A
159B
159C
159D
159E
159F
15A9
15AA
15AB
15AC
15AD
15AE
15AF
1610
1611
1612
1613
1614
1615
1616
1617
1618
1620
1621
1622
1623
1930
1931
1932
1933
1934
1935
1940
1942
1943
1944
1950
1952
1953
1954
1A23
1A26
1A37
1A38
1A39
1A41
1A50
1A51
1F80 ... 1FC1
2000
2002
2003
200A
200D
3000
Dxxy
Fxxx
Описание
| Error code: | 1101 |
| Display: | Replace part soon. |
| Description: | Data transmission did not finish within the specified time. |
| Causes: | An incompatible loop-back connector is connected to the parallel port, or the loop-back connector is not connected. Use the correct loop-back connector (P/#: G0219350) before the test. |
| Remedy: | Load paper. If the problem remains, then check the paper sensor. |
| Error code: | 1125 |
| Description: | CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set. • CR HP SENSOR failure • False detection of the home due to paper jam or any other obstacle • Misreading of CR SCALE • CR Lock is damaged. |
| Causes: | The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set. • CR HP SENSOR failure • False detection of the home due to paper jam or any other obstacle • Misreading of CR SCALE • CR Lock is damaged. |
| Remedy: | 1. Replace the CR HP SENSOR. 2. Re-install the CR ENCODER. If it is faulty, replace it. 3. Clean the CR SCALE using ethanol. 4. Replace the CR SCALE. 5. Replace the CR Lock . |
| Error code: | 1138 |
| Description: | Over current error Connection failure of the CR MOTOR or the CR ENCODER. • The number of occurrences of overcurrent to the CR MOTOR has reached a predetermined limit. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | • Connection failure of the CR MOTOR or the CR ENCODER. • The number of occurrences of overcurrent to the CR MOTOR has reached a predetermined limit. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. |
| Error code: | 1139 |
| Description: | Oscillation error The control terminal (Vre terminal) of the CR MOTOR driver has shorted out. |
| Causes: | The control terminal (Vre terminal) of the CR MOTOR driver has shorted out. |
| Remedy: | 1. Remove the foreign material. 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 113A |
| Description: | Overload error Overcurrent to the CR MOTOR was detected. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | Overcurrent to the CR MOTOR was detected. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Re-install the CR UNIT. 2. Replace the CR ENCODER. 3. Replace the CR MOTOR. |
| Error code: | 113B |
| Description: | Over speed error The CR MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CR ENCODER failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Causes: | The CR MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CR ENCODER failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the SUB BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 113C |
| Description: | Reversing error The number of occurrences of reversing the CR MOTOR has reached a predetermined limit. • The polarity of CR ENCODER cable is opposite. • The polarity of CR MOTOR cable is opposite. • Slipping of the teeth of CR TIMING BELT • CR ENCODER failure |
| Causes: | The number of occurrences of reversing the CR MOTOR has reached a predetermined limit. • The polarity of CR ENCODER cable is opposite. • The polarity of CR MOTOR cable is opposite. • Slipping of the teeth of CR TIMING BELT • CR ENCODER failure |
| Remedy: | 1. Adjust the tension of the CR TIMING BELT. 2. Replace the CR ENCODER. |
| Error code: | 113D |
| Description: | Driving time-out error Abnormally-long driving duration of the CR MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the CR MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 113E |
| Description: | Velocity deviation error The CR MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CR ENCODER failure • CR MOTOR failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Causes: | The CR MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CR ENCODER failure • CR MOTOR failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. 3. Replace the SUB BOARD. 4. Replace the MAIN BOARD. |
| Error code: | 113F |
| Description: | Lock error The CR MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | The CR MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. |
| Error code: | 1229 |
| Description: | PF Oscillation error |
| Causes: | The control terminal (Vre terminal) of the PF MOTOR driver has shorted out. |
| Remedy: | 1. Is the PF MOTOR driver on the MAIN BOARD damaged? 2. Is there any foreign materials around the PF MOTOR driver? 1. Remove the foreign material. 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 122A |
| Description: | Overload error Overcurrent to the PF MOTOR was detected. • PF ENCODER cable is damaged. • PF MOTOR cable is damaged. • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Causes: | Overcurrent to the PF MOTOR was detected. • PF ENCODER cable is damaged. • PF MOTOR cable is damaged. • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the MAIN BOARD. |
| Error code: | 122D |
| Description: | Driving time-out error Abnormally-long driving duration of the PF MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the PF MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 122E |
| Description: | Velocity deviation error The PF MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PF ENCODER failure • PF MOTOR failure • SUB BOARD is damaged. • PF MOTOR driver failure |
| Causes: | The PF MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PF ENCODER failure • PF MOTOR failure • SUB BOARD is damaged. • PF MOTOR driver failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the PF MOTOR. 3. Replace the MAIN BOARD. |
| Error code: | 122F |
| Description: | Lock error The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • PF ENCODER cable disconnection • PF MOTOR cable disconnection • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Causes: | The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • PF ENCODER cable disconnection • PF MOTOR cable disconnection • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the PF MOTOR. |
| Error code: | 131B |
| Description: | Head driver (transmission gate) overheat error The temperature of the Head driver rises, and has reached a predetermined limit. |
| Causes: | The temperature of the Head driver rises, and has reached a predetermined limit. |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. |
| Error code: | 1411 |
| Description: | Pump Cap Unit undetectable error Pump Cap Unit failure |
| Remedy: | Replace the Pump Cap Unit. |
| Error code: | 1418 |
| Description: | Overcurrent error Connection failure of the pump motor or the pump motor encoder. • The number of occurrences of overcurrent to the pump motor has reached a predetermined limit. • Irregular load • pump motor encoder failure • pump motor failure |
| Causes: | • Connection failure of the pump motor or the pump motor encoder. • The number of occurrences of overcurrent to the pump motor has reached a predetermined limit. • Irregular load • pump motor encoder failure • pump motor failure |
| Remedy: | Replace the pump motor encoder and pump motor . |
| Error code: | 1419 |
| Description: | Oscillation error The control terminal (Vre terminal) of the pump motor driver has shorted out. |
| Causes: | The control terminal (Vre terminal) of the pump motor driver has shorted out. |
| Remedy: | 1. Remove the foreign material. 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 141A |
| Description: | Overload error Overcurrent to the pump motor was detected. • Pump motor encoder cable disconnection • Pump motor cable disconnection • Irregular load • Pump motor encoder failure • Pump motor failure |
| Causes: | Overcurrent to the pump motor was detected. • Pump motor encoder cable disconnection • Pump motor cable disconnection • Irregular load • Pump motor encoder failure • Pump motor failure |
| Remedy: | Replace the pump motor encoder and pump motor . |
| Error code: | 141B |
| Description: | Over speed error The pump motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Pump motor encoder failure • Pump motor driver failure |
| Causes: | The pump motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Pump motor encoder failure • Pump motor driver failure |
| Remedy: | 1. Replace the pump motor encoder . 2. Replace the MAIN BOARD. |
| Error code: | 141C |
| Description: | Reversing error The number of occurrences of reversing the pump motor has reached a predetermined limit. • The polarity of pump motor encoder cable is opposite. • The polarity of pump motor cable is opposite. |
| Causes: | The number of occurrences of reversing the pump motor has reached a predetermined limit. • The polarity of pump motor encoder cable is opposite. • The polarity of pump motor cable is opposite. |
| Remedy: | Replace the pump motor encoder . |
| Error code: | 141D |
| Description: | Driving time-out error Abnormally-long driving duration of the pump motor was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the pump motor was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. the |
| Error code: | 141E |
| Description: | Velocity deviation error The pump motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Pump motor encoder failure • Pump motor failure • Pump motor driver failure |
| Causes: | The pump motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Pump motor encoder failure • Pump motor failure • Pump motor driver failure |
| Remedy: | 1. Replace the pump motor encoder and pump motor . 2. Replace the MAIN BOARD. |
| Error code: | 141F |
| Description: | Lock error The pump motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump motor encoder failure • Pump motor failure |
| Causes: | The pump motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump motor encoder failure • Pump motor failure |
| Remedy: | Replace the pump motor encoder and pump motor . |
| Error code: | 1431 |
| Description: | Suction pump life error The Pump Cap Unit has reached the end of its service life. (The total number of revolutions of the Pump Motor has reached a predetermined limit) |
| Causes: | The number of operation counter of the Ink Selector has reached the specified life. (10,000 times) |
| Remedy: | Replace the Pump Cap Unit and reset the counter . |
| Error code: | 1432 |
| Description: | IC Holder life error The IC Holder has reached the end of its service life. (The total number of times that the holder was removed from the printer has reached a predetermined limit) |
| Causes: | Operations of the diaphragm in the Cartridge Holder exceeded the specified value. |
| Remedy: | Replace the IC Holder and reset the counter . |
| Error code: | 1434 |
| Description: | Self-sealing valve life error The Self-sealing valve has reached the end of its service life. |
| Remedy: | Replace the Self-sealing valve and reset the counter . |
| Error code: | 1435 |
| Description: | Ink Path CR Assy life error The Ink Path CR Assy has reached the end of its service life. |
| Remedy: | Replace the Ink Path CR Assy and reset the counter . |
| Error code: | 150C |
| Description: | PG position undetectable error When changing the PG, the PG SENSOR could not detect the PG position. |
| Causes: | When changing the PG, the PG SENSOR could not detect the PG position. |
| Remedy: | 1. Replace the PG SENSOR. 2. Replace the APG UNIT. 3. Remove any obstacles around the CR UNIT home position. The printer changes the PG with the CR UNIT being at its home position. |
| Error code: | 1519 |
| Description: | Oscillation error The control terminal (Vre terminal) of the APG motor driver has shorted out. |
| Causes: | The control terminal (Vre terminal) of the APG motor driver has shorted out. |
| Remedy: | 1. Remove the foreign material. 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 151A |
| Description: | Overload error Connection failure of the APG motor. • Overcurrent to the APG motor was detected. • APG motor cable is damaged. • Irregular load • APG encoder failure • APG motor failure |
| Causes: | • Connection failure of the APG motor. • Overcurrent to the APG motor was detected. • APG motor cable is damaged. • Irregular load • APG encoder failure • APG motor failure |
| Remedy: | Replace the APG UNIT. |
| Error code: | 151B |
| Description: | Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • APG encoder failure • APG motor driver failure |
| Causes: | The APG motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • APG encoder failure • APG motor driver failure |
| Remedy: | 1. Replace APG UNIT. 2. Replace the MAIN BOARD. |
| Error code: | 151C |
| Description: | Reversing error The number of occurrences of reversing the APG motor has reached a predetermined limit. • The polarity of APG motor cable is opposite. • APG motor failure |
| Causes: | The number of occurrences of reversing the APG motor has reached a predetermined limit. • The polarity of APG motor cable is opposite. • APG motor failure |
| Remedy: | Replace APG UNIT. |
| Error code: | 151D |
| Description: | Driving time-out error Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Causes: | Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 151E |
| Description: | Velocity deviation error The APG motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • APG encoder failure • APG motor failure • APG motor driver failure |
| Causes: | The APG motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • APG encoder failure • APG motor failure • APG motor driver failure |
| Remedy: | 1. Replace APG UNIT. 2. Replace the MAIN BOARD. |
| Error code: | 151F |
| Description: | Lock error Connection failure of the APG motor. • The APG motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • APG encoder failure • APG motor failure |
| Causes: | • Connection failure of the APG motor. • The APG motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • APG encoder failure • APG motor failure |
| Remedy: | Replace APG UNIT. |
| Error code: | 1599 |
| Description: | Oscillation error The control terminal (Vre terminal) of the ATC MOTOR driver has shorted out. |
| Causes: | The control terminal (Vre terminal) of the ATC MOTOR driver has shorted out. |
| Remedy: | 1. Remove the foreign material. 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 159A |
| Description: | Overload error Overcurrent to the ATC MOTOR was detected. • ATC MOTOR cable disconnection. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure |
| Causes: | Overcurrent to the ATC MOTOR was detected. • ATC MOTOR cable disconnection. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure |
| Remedy: | Replace the ATC MOTOR. |
| Error code: | 159B |
| Description: | Over speed error The ATC Motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • ATC MOTOR encoder failure • APG MOTOR driver failure |
| Causes: | The ATC MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • ATC MOTOR encoder failure • APG MOTOR driver failure |
| Remedy: | 1. Replace the ATC MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 159C |
| Description: | Reversing error The number of occurrences of reversing the ATC Motor has reached a predetermined limit. • The polarity of ATC MOTOR cable is opposite. • ATC MOTOR failure |
| Causes: | The number of occurrences of reversing the ATC MOTOR has reached a predetermined limit. • The polarity of ATC MOTOR cable is opposite. • ATC MOTOR failure |
| Remedy: | Replace the ATC MOTOR. |
| Error code: | 159D |
| Description: | Driving time-out error Abnormally-long driving duration of the ATC MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the ATC MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 159E |
| Description: | Velocity deviation error The ATC MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure • ATC MOTOR driver failure |
| Causes: | The ATC MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure • ATC MOTOR driver failure |
| Remedy: | 1. Replace the ATC MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 159F |
| Description: | Lock error Connection failure of the ATC MOTOR. • The ATC MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure |
| Causes: | • Connection failure of the ATC MOTOR. • The ATC MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure |
| Remedy: | Replace the ATC MOTOR. |
| Error code: | 15A9 |
| Description: | Reel Motor oscillation error The control terminal (Vre terminal) of the Reel Motor driver has shorted out. |
| Remedy: | 1. Remove the foreign material. 2. If the error still occurs, replace the Main Board. |
| Error code: | 15AA |
| Description: | Reel Motor overload error Overcurrent to the Reel Motor was detected. • Reel Motor cable disconnection. • Irregular load • Reel Motor encoder failure • Reel Motor failure |
| Remedy: | Replace the Reel Motor. |
| Error code: | 15AB |
| Description: | Reel Motor over speed error The Reel Motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Reel Motor encoder failure • Sub-F Board failure • Reel Motor driver failure |
| Remedy: | 1. Replace the Reel Motor. 2. Replace the Sub-F Board. 3. Replace the Main Board. |
| Error code: | 15AC |
| Description: | Reel Motor reversing error The number of occurrences of reversing the Reel Motor has reached a predetermined limit. • The polarity of Reel Motor cable is opposite. • Reel Motor failure |
| Remedy: | Replace the Reel Motor. |
| Error code: | 15AD |
| Description: | Reel Motor driving time-out error Abnormally-long driving duration of the Reel Motor was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board. |
| Error code: | 15AE |
| Description: | Reel Motor velocity deviation error The Reel Motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Reel Motor encoder failure • Reel Motor failure • Sub-F Board failure • Reel Motor driver failure |
| Remedy: | 1. Replace the Reel Motor. 2. Replace the Sub-F Board. 3. Replace the Main Board. |
| Error code: | 15AF |
| Description: | Reel Motor lock error • Connection failure of the Reel Motor. • The Reel Motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Reel Motor encoder failure • Reel Motor failure |
| Remedy: | Replace the Reel Motor. |
| Error code: | 1610 |
| Description: | PF heater 2 low temperature error (paper feeder 1) An external temperature higher than + 5C/+ 9F is not detected when one minute elapses after PF heater 2 is turned on. |
| Causes: | Defective connector cable or poor contact in the connector. PF thermistor 2 installed incorrectly. Defective PF thermistor 2. Broken PF heater 2. Defective PF heater PWB or PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF heater 2 and PF heater PWB (YC2) PF heater PWB (YC3) and PF main PWB (YC113) PF thermistor 2 and PF main PWB (YC115) PF thermistor 2 installed incorrectly. Check the installation of the PF thermistor 2. Defective PF thermistor 2. Replace the side heater unit (Refer to the service manual for the paper feeder). Broken PF heater 2. Replace the side heater unit (Refer to the service manual for the paper feeder). Defective PF heater PWB or PF main PWB. Replace the PF heater PWB or PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1611 |
| Description: | Roll Unit undetectable error The Roll Unit could not be detected during mechanism initialization process. |
| Remedy: | Connect the connector of the Roll Unit. |
| Error code: | 1612 |
| Description: | Roll Unit undetectable error at the start of operation When the ATC Motor started to operate, it was detected that the Roll Unit status is different from that detected during mechanism initialization process. |
| Remedy: | 1. Connect the connector of the Roll Unit. 2. Turn the printer off and back on. |
| Error code: | 1613 |
| Description: | Roll Unit undetectable error during operation The connector of the Roll Unit was disconnected during the ATC Motor was operating. |
| Remedy: | Connect the connector of the Roll Unit. |
| Error code: | 1614 |
| Description: | Reel Unit undetectable error at the start of operation When the Reel Motor started to operate, it was detected that the Reel Unit status is different from that detected during mechanism initialization process. |
| Remedy: | 1. Connect the connector of the Reel Unit. 2. Turn the printer off and back on. |
| Error code: | 1615 |
| Description: | Reel Unit undetectable error during operation The connector of the Reel Unit was disconnected during the Reel Motor was operating. |
| Remedy: | Connect the connector of the Reel Unit. |
| Error code: | 1616 |
| Description: | Roll Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board. |
| Remedy: | Replace the Sub-F Board of the Roll Unit. |
| Error code: | 1617 |
| Description: | Reel Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board. |
| Remedy: | Replace the Sub-F Board of the Reel Unit. |
| Error code: | 1618 |
| Description: | Roll/Reel Unit Board failure There is a problem with a specific bit on the board, which detects what device is connected to the board. |
| Remedy: | Replace the Sub-F Board of the Roll Unit and Reel Unit . |
| Error code: | 1620 |
| Description: | PF heater 1 low temperature error (paper feeder 2) An external temperature higher than + 5C/+ 9F is not detected when one minute elapses after PF heater 1 is turned on. |
| Causes: | Defective connector cable or poor contact in the connector. PF thermistor 1 installed incorrectly. Defective PF thermistor 1. Broken PF heater 1. Defective PF heater PWB or PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF heater 1 and PF heater PWB (YC1) PF heater PWB (YC3) and PF main PWB (YC113) PF thermistor 1 and PF main PWB (YC114) PF thermistor 1 installed incorrectly. Check the installation of the PF thermistor 1. Defective PF thermistor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Broken PF heater 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF heater PWB or PF main PWB. Replace the PF heater PWB or PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1621 |
| Description: | Pressurizing/Suction switching error The pressurizing and suction processes did not complete within a predetermined time period. |
| Causes: | The pressurizing and suction processes did not complete within a predetermined time period. |
| Remedy: | 1. Replace the pressure unit (IC HOLDER). 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 1622 |
| Description: | Operating time-out error The switching operation did not complete within a predetermined time period. |
| Causes: | The switching operation did not complete within a predetermined time period. |
| Remedy: | 1. Replace the pressure unit (IC HOLDER). 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 1623 |
| Description: | Continuous revolution error The control terminal (Vre terminal) of the pressure motor driver has shorted out. |
| Causes: | The control terminal (Vre terminal) of the pressure motor driver has shorted out. |
| Remedy: | 1. Remove the foreign materials. 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 1930 |
| Description: | Paper feeder 4 EEPROM error When writing the data, the write data and the read data is not in agreement. |
| Causes: | Defective PF main PWB. Device damage of EEPROM. |
| Remedy: | Defective PF main PWB. Replace the PF main PWB. Device damage of EEPROM. Replace the PF main PWB. |
| Error code: | 1931 |
| Description: | HTC common elements communication error • Connection failure between the Main Board and Sub-E Board such as cable disconnection • There is something wrong with the elements on the Sub-E Board. • There is something wrong with the communication elements on the Main Board. |
| Remedy: | 1. Reconnect the cable. 2. Replace the cable. 3. Replace the Sub-E Board. 4. Replace the Main Board. |
| Error code: | 1932 |
| Description: | Pre Heater overheat error A heater temperature out of a predetermined range was detected the predetermined number of times in a row. |
| Remedy: | 1. Replace the thermistor . 2. Replace the Main Board. |
| Error code: | 1933 |
| Description: | Pre Heater heat deviation error The difference between the current temperature and target temperature exceeded a predetermined limit. |
| Remedy: | 1. Replace the thermistor . 2. Replace the Main Board. |
| Error code: | 1934 |
| Description: | Pre Heater power supply abnormal error 1 Cable disconnection, breaking, blowout of a fuse, or heater failure. |
| Remedy: | 1. Reconnect the cable. 2. Replace the cable. 3. Replace the Sub-E Board. 4. Replace the Pre Heater. |
| Error code: | 1935 |
| Description: | HTC common power supply abnormal error 2 Abnormal temperature (the heater is not heated). |
| Remedy: | 1. Reconnect the thermistor. 2. Replace the Sub-E Board. |
| Error code: | 1940 |
| Description: | Platen Heater AD abnormal error A thermistor temperature out of a predetermined range was detected the predetermined number of times in a row. |
| Remedy: | 1. Replace the thermistor . 2. Replace the Main Board. |
| Error code: | 1942 |
| Description: | Platen Heater overheat error A heater temperature out of a predetermined range was detected the predetermined number of times in a row. |
| Remedy: | 1. Replace the thermistor . 2. Replace the Platen Heater. 3. Replace the Main Board. |
| Error code: | 1943 |
| Description: | Platen Heater heat deviation error The difference between the current temperature and target temperature exceeded a predetermined limit. |
| Remedy: | 1. Replace the thermistor . 2. Replace the Platen Heater. 3. Replace the Main Board. |
| Error code: | 1944 |
| Description: | Platen Heater power supply abnormal error 1 Cable disconnection, breaking, blowout of a fuse, or heater failure. |
| Remedy: | 1. Reconnect the cable. 2. Replace the cable. 3. Replace the Sub-E Board. 4. Replace the Platen Heater. |
| Error code: | 1950 |
| Description: | Intermediate transfer belt unit EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated 5 times successively. Mismatch of reading data from 2 locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
| Causes: | Defective connector cable or poor contact in the connector. Defective transfer belt unit. |
| Remedy: | Transfer belt sensor 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Engine PWB (YC27) and RFID PWB (4P connector) (Check wirings on the RFID side since the signal line for the intermediate transfer belt sensor EEPROM on the engine PWB and the signal line for the toner container RFID are the same.) Intermediate transfer belt unit and Engine PWB (YC3) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Intermediate transfer belt unit. |
| Error code: | 1952 |
| Description: | After Heater overheat error A heater temperature out of a predetermined range was detected the predetermined number of times in a row. |
| Remedy: | 1. Replace the thermistor (After Heater). 2. Replace the After Heater. 3. Replace the Main Board. |
| Error code: | 1953 |
| Description: | After Heater heat deviation error The difference between the current temperature and target temperature exceeded a predetermined limit. |
| Remedy: | 1. Replace the thermistor (After Heater). 2. Replace the After Heater. 3. Replace the Main Board. |
| Error code: | 1954 |
| Description: | After Heater power supply abnormal error 1 • Cable disconnection, breaking, blowout of a fuse, or heater failure. • AC cable (for the After Heater) disconnection |
| Remedy: | 1. Reconnect the cable. 2. Replace the cable. 3. Replace the Sub-E Board. 4. Replace the After Heater. |
| Error code: | 1A23 |
| Description: | Incorrect RTC data error The various absolute time settings stored on the NVRAM are abnormal. |
| Causes: | The various absolute time settings stored on the NVRAM are abnormal. |
| Remedy: | If the error still occurs after resetting the date and time, perform the followings. 1. Replace the RTC backup battery. 2. Replace the MAIN BOARD. |
| Error code: | 1A26 |
| Description: | RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions |
| Causes: | The RTC circuit on the MAIN BOARD malfunctions. |
| Remedy: | 1. Turn the power off and remove the RTC backup battery. 2. After several seconds, re-attach the battery and turn the power back on. 3. Reset the date and time settings of the RTC using the Service Program. |
| Error code: | 1A37 |
| Description: | Thermistor error The HEAD FFC is not connected correctly. • A temperature out of a predetermined range was detected by the Head thermistor. • Head thermistor failure |
| Causes: | • The HEAD FFC is not connected correctly. • A temperature out of a predetermined range was detected by the Head thermistor. • Head thermistor failure |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. |
| Error code: | 1A38 |
| Description: | Transistor environmental temperature error Transistor failure • A temperature out of a predetermined range was detected by the Head thermistor. |
| Causes: | • Transistor failure • A temperature out of a predetermined range was detected by the Head thermistor. |
| Remedy: | Replace the PRINT HEAD. |
| Error code: | 1A39 |
| Description: | Head error Connection failure of the HEAD FFC. • Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle. • The drive circuit in the PRINT HEAD is damaged. • The fuse of the MAIN BOARD has blown. |
| Causes: | • Connection failure of the HEAD FFC. • Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle. • The drive circuit in the PRINT HEAD is damaged. • The fuse of the MAIN BOARD has blown. |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. 3. Replace the MAIN BOARD. |
| Error code: | 1A41 |
| Description: | Head rank ID input error An invalid Head rank ID was written to the NVRAM. |
| Causes: | An invalid Head rank ID was written to the NVRAM. |
| Remedy: | Rewrite the Head rank ID with a correct one. |
| Error code: | 1A50 |
| Description: | I2C communication error (Between elements on ASIC and MAIN) An I2C communication error has occurred in the MAIN BOARD |
| Causes: | An I2C communication error has occurred in the MAIN BOARD. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 1A51 |
| Description: | I2C communication error (Between elements on ASIC and SUB) An I2C communication error between the MAIN BOARD and SUB BOARD has occurred. |
| Causes: | An I2C communication error between the MAIN BOARD and SUB BOARD has occurred. |
| Remedy: | 1. Replace the FFC between the MAIN BOARD and SUB BOARD. 2. Replace the SUB BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 1F80 ... 1FC1 |
| Description: | CSIC error |
| Remedy: | 1. Replace the IC Holder. 2. Replace the Main Board. |
| Error code: | 2000 |
| Description: | DDA Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 2002 |
| Description: | Printer controller: FGATE error Printer application returned FGATE error notification to copier. |
| Causes: | • FGATE error |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 2003 |
| Description: | FLASH BOOT SUM CHECK error Installing the firmware has failed. • The Flash ROM is out of order. |
| Causes: | • Installing the firmware has failed. • The Flash ROM is out of order. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
| Error code: | 200A |
| Display: | Paper size not detected. Press Load/Eject and reload the paper. Paper size not detected. Reload paper. Paper size not detected. Press OK and reload the paper. |
| Description: | F/W load error Reading/decompressing the firmware has failed. |
| Causes: | Reading / decompressing the firmware has failed. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
| Error code: | 200D |
| Description: | System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred. |
| Causes: | A system failure such as CPU failure, or defective cash has occurred. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 3000 |
| Description: | Main Motor`s failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning. |
| Causes: | The AC power has been shut off due to a power failure, unplugged, PSH BOARD failure, or MAIN BOARD failure or the like. |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PWB-M connector for proper connection and correct as necessary. 4 M1 operation check PWB-M CNDM1-5 (REM) PWB-M CNDM1-8 (LOCK) K to L-2. 5 Change PWB-M. 6 Change PU1. |
| Error code: | Dxxy |
| Description: | Service call for FW debugging This error is intended to be used in the product development stage. It is supposed to not occur to marketed products, but may occur due to an unexpected cause such as external noises. |
| Causes: | This error is intended to be used in the product development stage. It is supposed to not occur to marketed products, but may occur due to an unexpected cause such as external noises. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
| Error code: | Fxxx |
| Description: | CPU related service call There is something wrong with the firmware |
| Causes: | There is something wrong with the firmware. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
