Epson Stylus CX9300F

Рейтинг

Снят с производства

Тип устройства

МФУ

Технология печати

пьезоэлектрическая струйная

Макс. формат

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Телефон
Факс
Сканер
Копир
Печать фотографий
Тип устройства	МФУ
Технология печати	пьезоэлектрическая струйная
Тип	струйный
Область применения	персональный
Размещение	настольный
Цветность печати	цветная
Макс. формат	A4
Принтер
Двусторонняя печать
Печать без полей
Прямая печать
Пигментные чернила
Мин, объем капли	3 пл
Количество цветов	4
Время цветной печати 10x15 см	26
Макс, разрешение для ч/б печати
По Y	1 440
По X	5 760
Скорость ч/б печати
A4	32
A4	30
Копир
Макс, разрешение (ч/б)
По X	200
По X	1 200
Сканер
Тип датчика сканера	контактный (CIS)
Макс. формат оригинала	A4
Емкость устройства автоподачи оригиналов	30
Тип сканера	планшетный/протяжный
Устройство автоподачи оригиналов	одностороннее
Макс, размер сканирования
По Y	297
По X	210
Разрешение сканера
По Х	1 200
По Y	2 400
Расходные материалы
Ресурс ч/б картриджа/тонера	245
Количество картриджей	4
Ресурс цветного картриджа/тонера	375
Печать на:
Карточках
Пленках
Этикетках
Фотобумаге
Глянцевой бумаге
Матовой бумаге
Конвертах
CD/DVD
Рулоне
Факс
PC Fax
Цветной
Макс, скорость передачи данных	33,6 Кбит/с
Память	180
Макс, разрешение
По Y	200
Телефон
Автоответчик
Caller ID
АОН
Беспроводная трубка
Спикерфон
Стандарт DECT
Проводная трубка
Языки управления
PDF
PostScript
PostScript 2
PostScript 3
PCL 5c
PCL 5e
PCL 6
PPDS
Подача бумаги
Стандартная	120
Финишер
Брошюровщик
Сортер
Сортировка со сдвигом
Степлер
Электронная сортировка
Интерфейсы
Устройство для чтения карт памяти
USB
LPT
Ethernet (RJ-45)
FireWire (IEEE 1394)
Wi-Fi
Bluetooth
Инфракрасный порт
RS-232
Веб-интерфейс
Версия USB	2,0
Поддержка карт памяти
xD-Picture
CompactFlash
Memory Stick Pro
MultiMedia Card
Secure Digital
Memory Stick
Дополнительная информация
Диагональ дисплея	2,5
Экран
Мин. системные требования	Intel Pentium II
Поддержка ОС
DOS
Linux
Mac OS
Windows
Уровень шума
При работе	39
Габариты
Высота	236
Ширина	460
Глубина	410
Вес	7,6

Модули

MECH-021

ELEC-011

MECH-022

CASE-012

MECH-013

Детали CASE-012

Деталь:	INK CART.UNBOXED,BK-SS,PIGT, H28F,A/A,AS
Парткод:	1471126

Деталь:	INK CART.UNBOXED,C-SSS,PIGT, H28F,A/A,AS
Парткод:	1471127

Деталь:	INK CART.UNBOXED,M-SSS,PIGT, H28F,A/A,AS
Парткод:	1471129

Деталь:	INK CART.UNBOXED,Y-SSS,PIGT, H28F,A/A,AS
Парткод:	1471130

Деталь:	SOFTWARE CD,E/R/UK/AR
Парткод:	3102915

Деталь:	SETTING UP MANUAL
Парткод:	4111059

Деталь:	USERS GUIDE
Парткод:	4111060

Деталь:	PAPER SUPPORT ASSY., IEI
Парткод:	1468059

Деталь:	HOUSING,FRONT
Парткод:	1464738

Деталь:	LENS,CARD,SLOT
Парткод:	1460741

Деталь:	HOUSING,PANEL
Парткод:	1464739

Деталь:	BUTTON,POWER
Парткод:	1464740

Деталь:	BUTTON,START
Парткод:	1464741

Деталь:	BUTTON,STOP
Парткод:	1464742

Деталь:	BUTTON,SELECT
Парткод:	1464744

Деталь:	BUTTON,OK
Парткод:	1464745

Деталь:	BUTTON,TOOL
Парткод:	1464748

Деталь:	LENS,POWER
Парткод:	1464749

Деталь:	LENS,MODE
Парткод:	1464750

Деталь:	HOUSING,LOWER
Парткод:	1464733

Деталь:	HOUSING,UPPER
Парткод:	1464734

Деталь:	COVER,USB
Парткод:	1464736

Деталь:	COVER,INKTUBE
Парткод:	1460736

Деталь:	BUTTON,FAX, B
Парткод:	1472773

Деталь:	COVER,MODE
Парткод:	1464746

Деталь:	HOUSING,LOWER,SC
Парткод:	1464356

Деталь:	COVER,REAR,ADF
Парткод:	1464384

Деталь:	COVER,FRONT,ADF
Парткод:	1464383

Деталь:	DOCUMENT,SUPPORT,ADF
Парткод:	1464317

Деталь:	BUTTON,MODE
Парткод:	1464743

Деталь:	COVER,CARD,SLOT ASSY., IEI
Парткод:	1468042

Деталь:	STACKER ASSY., IEI
Парткод:	1468041

Деталь:	HOUSING,UPPER,SC ASSY., IEI,ASP
Парткод:	1477304

Деталь:	SHEET,PANEL,RIGHT, H
Парткод:	1476952

Деталь:	SHEET,PANEL,LEFT, G
Парткод:	1476961

Деталь:	AC CABLE
Парткод:	2038711

Коды ошибок

Описание

Парткод

Название

EPSON T0731 Картридж черный

EPSON T0732 Картридж голубой

EPSON T0733 Картридж пурпурный

EPSON T0734 Картридж желтый

EPSON T0735 Набор картриджей T0731-734

EPSON T731H / T0721 Картридж черный повышенной емкости, двойная упаковка

Деталь:	POROUS PAD,INK EJ,FB,UPPER, C
Парткод:	1484639

Деталь:	POROUS PAD,INK EJ,FB,LOWER, C
Парткод:	1484641

Деталь:	HOLDER,ROLLER,DRIVEN,EJ,ADF
Парткод:	1464360

Деталь:	POROUS PAD,PAPER GUIDE,FRONT, ASP
Парткод:	1476501

Деталь:	DIFFUSION SHEET,INK EJECT, ASP
Парткод:	1473327

Деталь:	COVER,CARTRIDGE ASSY., IEI
Парткод:	1466189

Деталь:	PAPER PASS ASSY., IEI,ASP
Парткод:	1490634

Деталь:	POWER SUPPLY,C696, PSE ASSY., IEI
Парткод:	1468089

Error code:	01
Display:	ERROR CONDITION INVALID HEAD
Description:	The ERROR light flashes.
Causes:	The printhead was replaced with one that is not a genuine Zebra™ printhead.
Remedy:	Install a genuine Zebra printhead.

Error code:	02
Display:	ERROR CONDITION RIBBON OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly.
Remedy:	Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73.

Деталь:	FOOT
Парткод:	1217084

Деталь:	CABLE,HEAD
Парткод:	2116917

Деталь:	CABLE,HEAD, B
Парткод:	2116918

Деталь:	ROLLER,LD, B
Парткод:	1075955

Error code:	03
Display:	WARNING RIBBON IN
Description:	The ERROR light flashes.
Causes:	Ribbon is loaded, but the printer is set for direct thermal mode.
Remedy:	Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81.

Error code:	04
Display:	ERROR CONDITION PAPER OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded.
Remedy:	Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration.

Error code:	05
Display:	ERROR CONDITION HEAD OPEN
Description:	The printer stops; the ERROR light flashes.
Causes:	The printhead is not fully closed. The head open sensor is not working properly.
Remedy:	Replace the sensor.

Error code:	06
Display:	THERMISTOR FAULT
Description:	The ERROR light flashes.
Causes:	The printhead has a faulty thermistor.
Remedy:	Replace the printhead.

Error code:	07
Display:	WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD
Description:	The printer stops; the ERROR light is on; the printer cycles through these three messages.
Causes:	The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Error code:	08
Display:	WARNING HEAD COLD
Description:	The printer prints while the ERROR light flashes.
Causes:	The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Error code:	09
Display:	WARNING HEAD TOO HOT
Description:	The printer stops; the ERROR light flashes.
Causes:	The printhead is over temperature.
Remedy:	Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature.

Error code:	10
Display:	DEFRAGMENTING
Description:	The printer stops.
Causes:	The printer is defragmenting memory.
Remedy:	Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service.

Error code:	11
Display:	ERROR CONDITION CUTTER JAM
Description:	The printer stops; the ERROR light flashes.
Causes:	Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path.
Remedy:	Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135.

Error code:	12
Description:	General print quality issues
Causes:	The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced.
Remedy:	For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance.

Epson Stylus CX9300F

Общие характеристики

Телефон

Факс

Сканер

Копир

Печать фотографий

Тип устройства

Технология печати

Тип

Область применения

Размещение

Цветность печати

Макс. формат

Принтер

Двусторонняя печать

Печать без полей

Прямая печать

Пигментные чернила

Мин, объем капли

Количество цветов

Время цветной печати 10x15 см

Макс, разрешение для ч/б печати

Скорость ч/б печати

Копир

Макс, разрешение (ч/б)

Сканер

Тип датчика сканера

Макс. формат оригинала

Емкость устройства автоподачи оригиналов

Тип сканера

Устройство автоподачи оригиналов

Макс, размер сканирования

Разрешение сканера

Расходные материалы

Ресурс ч/б картриджа/тонера

Количество картриджей

Ресурс цветного картриджа/тонера

Печать на:

Факс

PC Fax

Цветной

Макс, скорость передачи данных

Память

Макс, разрешение

Телефон

Автоответчик

Caller ID

АОН

Беспроводная трубка

Спикерфон

Стандарт DECT

Проводная трубка

Языки управления

Подача бумаги

Финишер

Брошюровщик

Сортер

Сортировка со сдвигом

Степлер

Электронная сортировка

Интерфейсы

Устройство для чтения карт памяти

USB

LPT

Ethernet (RJ-45)

FireWire (IEEE 1394)

Wi-Fi

Bluetooth

Инфракрасный порт

RS-232

Веб-интерфейс

Версия USB

Поддержка карт памяти

Дополнительная информация

Диагональ дисплея

Экран

Мин. системные требования

Поддержка ОС

Уровень шума

Error code:	13
Description:	Long tracks of missing print on several labels
Causes:	Print element damaged.
Remedy:	Replace the printhead.

Error code:	14
Description:	Wrinkled ribbon
Causes:	Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned.
Remedy:	See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance.

Error code:	15
Description:	Printing too light or too dark over the entire label
Causes:	The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure.
Remedy:	Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70.

Error code:	16
Description:	Smudge marks on labels
Causes:	The media or ribbon is not designed for high-speed operation.
Remedy:	Replace supplies with those recommended for high-speed operation.

Error code:	17
Description:	Misregistration/skips labels
Causes:	The printer is not calibrated. Improper label format.
Remedy:	Recalibrate the printer. Use correct label format.

Error code:	18
Description:	Misregistration and misprint of one to three labels
Causes:	The platen roller is dirty. Media does not meet specifications.
Remedy:	See Clean the Printhead and Platen Roller on page 131. Use media that meets specifications.

Error code:	19
Description:	Vertical drift in top-of-form position
Causes:	The printer is out of calibration. Vertical drift occurs during normal printer operation. Note • A vertical drift of ± 4 to 6 dot rows (approximately 0.5 mm) is within normal tolerances. The platen roller is dirty.
Remedy:	Recalibrate the printer. Calibrate the printer. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131.

Error code:	20
Description:	Vertical image or label drift
Causes:	The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media.
Remedy:	Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation.