Epson Stylus DX9400F

Рейтинг

Модули

CASE-012

ELEC-011

MECH-022

MECH-013

MECH-021

Детали

Деталь:	INK CART.UNBOXED,BK-SS,PIGT, H28F,A/A,AS
Парткод:	1471126

Деталь:	INK CART.UNBOXED,C-SSS,PIGT, H28F,A/A,AS
Парткод:	1471127

Деталь:	INK CART.UNBOXED,M-SSS,PIGT, H28F,A/A,AS
Парткод:	1471129

Деталь:	INK CART.UNBOXED,Y-SSS,PIGT, H28F,A/A,AS
Парткод:	1471130

Деталь:	SOFTWARE CD,E/R/UK/AR
Парткод:	3102915

Деталь:	SETTING UP MANUAL
Парткод:	4111059

Деталь:	USERS GUIDE
Парткод:	4111060

Деталь:	PAPER SUPPORT ASSY., IEI
Парткод:	1468059

Деталь:	HOUSING,FRONT
Парткод:	1464738

Деталь:	LENS,CARD,SLOT
Парткод:	1460741

Деталь:	HOUSING,PANEL
Парткод:	1464739

Деталь:	BUTTON,POWER
Парткод:	1464740

Деталь:	BUTTON,START
Парткод:	1464741

Деталь:	BUTTON,STOP
Парткод:	1464742

Деталь:	BUTTON,SELECT
Парткод:	1464744

Деталь:	BUTTON,OK
Парткод:	1464745

Деталь:	BUTTON,TOOL
Парткод:	1464748

Деталь:	LENS,POWER
Парткод:	1464749

Деталь:	LENS,MODE
Парткод:	1464750

Деталь:	HOUSING,LOWER
Парткод:	1464733

Деталь:	HOUSING,UPPER
Парткод:	1464734

Деталь:	COVER,USB
Парткод:	1464736

Деталь:	COVER,INKTUBE
Парткод:	1460736

Деталь:	BUTTON,FAX, B
Парткод:	1472773

Деталь:	COVER,MODE
Парткод:	1464746

Деталь:	HOUSING,LOWER,SC
Парткод:	1464356

Деталь:	COVER,REAR,ADF
Парткод:	1464384

Деталь:	COVER,FRONT,ADF
Парткод:	1464383

Деталь:	DOCUMENT,SUPPORT,ADF
Парткод:	1464317

Деталь:	BUTTON,MODE
Парткод:	1464743

Деталь:	COVER,CARD,SLOT ASSY., IEI
Парткод:	1468042

Деталь:	STACKER ASSY., IEI
Парткод:	1468041

Деталь:	HOUSING,UPPER,SC ASSY., IEI,ASP
Парткод:	1477304

Деталь:	SHEET,PANEL,RIGHT, H
Парткод:	1476952

Деталь:	SHEET,PANEL,LEFT, G
Парткод:	1476961

Деталь:	AC CABLE
Парткод:	2038711

Деталь:	INK CART.UNBOXED,BK-SS,PIGT, H28F,A/A,AS
Парткод:	1471126

Деталь:	INK CART.UNBOXED,C-SSS,PIGT, H28F,A/A,AS
Парткод:	1471127

Деталь:	INK CART.UNBOXED,M-SSS,PIGT, H28F,A/A,AS
Парткод:	1471129

Деталь:	INK CART.UNBOXED,Y-SSS,PIGT, H28F,A/A,AS
Парткод:	1471130

Деталь:	SOFTWARE CD,E/R/UK/AR
Парткод:	3102915

Деталь:	SETTING UP MANUAL
Парткод:	4111059

Деталь:	USERS GUIDE
Парткод:	4111060

Деталь:	BOARD ASSY.,MAIN
Парткод:	2122141

Деталь:	BOARD ASSY.,PANEL
Парткод:	2116761

Деталь:	POWER SUPPLY,C696, PSE ASSY., IEI
Парткод:	1468089

Деталь:	AC CABLE
Парткод:	2038711

Деталь:	PAPER SUPPORT ASSY., IEI
Парткод:	1468059

Деталь:	HOUSING,FRONT
Парткод:	1464738

Деталь:	LENS,CARD,SLOT
Парткод:	1460741

Деталь:	HOUSING,PANEL
Парткод:	1464739

Деталь:	BUTTON,POWER
Парткод:	1464740

Деталь:	BUTTON,START
Парткод:	1464741

Деталь:	BUTTON,STOP
Парткод:	1464742

Деталь:	BUTTON,SELECT
Парткод:	1464744

Деталь:	BUTTON,OK
Парткод:	1464745

Деталь:	BUTTON,TOOL
Парткод:	1464748

Деталь:	LENS,POWER
Парткод:	1464749

Деталь:	LENS,MODE
Парткод:	1464750

Деталь:	HOUSING,LOWER
Парткод:	1464733

Деталь:	HOUSING,UPPER
Парткод:	1464734

Деталь:	COVER,USB
Парткод:	1464736

Деталь:	COVER,INKTUBE
Парткод:	1460736

Деталь:	BUTTON,FAX, B
Парткод:	1472773

Деталь:	COVER,MODE
Парткод:	1464746

Деталь:	HOUSING,LOWER,SC
Парткод:	1464356

Деталь:	COVER,REAR,ADF
Парткод:	1464384

Деталь:	COVER,FRONT,ADF
Парткод:	1464383

Деталь:	DOCUMENT,SUPPORT,ADF
Парткод:	1464317

Деталь:	BUTTON,MODE
Парткод:	1464743

Деталь:	COVER,CARD,SLOT ASSY., IEI
Парткод:	1468042

Деталь:	STACKER ASSY., IEI
Парткод:	1468041

Деталь:	HOUSING,UPPER,SC ASSY., IEI,ASP
Парткод:	1477304

Деталь:	SHEET,PANEL,RIGHT, H
Парткод:	1476952

Деталь:	SHEET,PANEL,LEFT, G
Парткод:	1476961

Деталь:	FOOT
Парткод:	1217084

Деталь:	CABLE,HEAD
Парткод:	2116917

Деталь:	CABLE,HEAD, B
Парткод:	2116918

Деталь:	ROLLER,LD, B
Парткод:	1075955

Деталь:	EXTENSION SPRING,0.143
Парткод:	1052673

Деталь:	CLUTCH
Парткод:	1459833

Деталь:	SCALE,CR
Парткод:	1279691

Деталь:	TIMING BELT,CR
Парткод:	1459802

Деталь:	SPUR GEAR,51.5
Парткод:	1459817

Деталь:	ROLLER,EJECT, B
Парткод:	1486767

Деталь:	POROUS PAD,INK EJ,MIDDLE
Парткод:	1459869

Деталь:	POROUS PAD,INK EJ/LOWER
Парткод:	1459874

Деталь:	STOPPER,TUBE
Парткод:	1459875

Деталь:	COVER,INK EJ
Парткод:	1459873

Деталь:	POROUS PAD,CAP,LOWER, B
Парткод:	1470961

Деталь:	POROUS PAD,INK EJ,FB,UPPER, C
Парткод:	1484639

Деталь:	DETECTOR,PE
Парткод:	2116016

Деталь:	SPUR GEAR,13.5
Парткод:	1436876

Деталь:	BOARD ASSY.,ENCODER
Парткод:	2116014

Деталь:	POROUS PAD,INK EJ,FB,LOWER, C
Парткод:	1484641

Деталь:	PRINT HEAD
Парткод:	F182000

Деталь:	LABEL,POSITION,CARTRIDGE
Парткод:	1464551

Деталь:	COVER,CABLE,HEAD
Парткод:	1459779

Деталь:	HINGE,COVER,CARTRIDGE
Парткод:	1430589

Деталь:	COMPRESSION SPRING,3.39
Парткод:	1482069

Деталь:	HINGE,ASSY.
Парткод:	1438858

Деталь:	HINGE,ASSY., B
Парткод:	1438860

Деталь:	CABLE,ENCODER,PF
Парткод:	2116731

Деталь:	COVER,CABLE,HEAD,INNER
Парткод:	1459776

Деталь:	GUIDE,HINGE
Парткод:	1435766

Деталь:	COMBINATION GEAR,16.8,9
Парткод:	1464397

Деталь:	ROLLER,PF,ADF
Парткод:	1464359

Деталь:	BUSHING,EJ,ADF
Парткод:	1464378

Деталь:	SPUR GEAR,10
Парткод:	1464396

Деталь:	HOLDER,ROLLER,DRIVEN,EJ,ADF
Парткод:	1464360

Деталь:	ROLLER,DRIVEN,ADF
Парткод:	1464371

Деталь:	COMPRESSION SPRING,6.28
Парткод:	1467115

Деталь:	COVER,CABLE,ADF
Парткод:	1464386

Деталь:	COVER,CABLE,SUPPORT,ADF
Парткод:	1464387

Деталь:	GUIDE,I/C, F
Парткод:	1459778

Деталь:	HOLDER,DRIVEN ASSY., IEI
Парткод:	1468050

Деталь:	COVER,ADF ASSY., IEI,ASP
Парткод:	1495173

Деталь:	CLEANER,HEAD, ASP
Парткод:	1477298

Деталь:	SUB CR ASSY., IEI
Парткод:	1475097

Деталь:	POROUS PAD,PAPER GUIDE,FRONT, ASP
Парткод:	1476501

Деталь:	DIFFUSION SHEET,INK EJECT, ASP
Парткод:	1473327

Деталь:	ROLLER,PF ASSY., IEI
Парткод:	1466016

Деталь:	SCALE,PF ASSY., IEI
Парткод:	1471717

Деталь:	INK SYSTEM ASSY., IEI
Парткод:	1466180

Деталь:	COVER,CARTRIDGE ASSY., IEI
Парткод:	1466189

Деталь:	HOPPER ASSY., IEI
Парткод:	1480769

Деталь:	ASF UNIT., B, IEI
Парткод:	1491448

Деталь:	HOLDER,BOARD ASSY., IEI
Парткод:	1466183

Деталь:	MOTOR,ASSY.,PF
Парткод:	2117627

Деталь:	MOTOR,ASSY,CR
Парткод:	2116729

Деталь:	LCD ASSY., IEI
Парткод:	1468044

Деталь:	SCANNER UNIT, IEI,ASP
Парткод:	2122722

Деталь:	ADF UNIT, IEI,ASP
Парткод:	2122999

Деталь:	PAPER PASS ASSY., IEI,ASP
Парткод:	1490634

Деталь:	BASE,ADF ASSY., IEI,ASP
Парткод:	1477300

Деталь:	PRINTER MECHANISM (ASP)
Парткод:	2122402

Деталь:	EDGE GUIDE,FRONT
Парткод:	1464318

Деталь:	EDGE GUIDE,REAR
Парткод:	1464319

Деталь:	SPUR GEAR,12.8
Парткод:	1464320

Деталь:	FOOT
Парткод:	1217084

Деталь:	CABLE,HEAD
Парткод:	2116917

Деталь:	CABLE,HEAD, B
Парткод:	2116918

Деталь:	ROLLER,LD, B
Парткод:	1075955

Деталь:	EXTENSION SPRING,0.143
Парткод:	1052673

Деталь:	CLUTCH
Парткод:	1459833

Деталь:	SCALE,CR
Парткод:	1279691

Деталь:	TIMING BELT,CR
Парткод:	1459802

Деталь:	SPUR GEAR,51.5
Парткод:	1459817

Деталь:	ROLLER,EJECT, B
Парткод:	1486767

Деталь:	POROUS PAD,INK EJ,MIDDLE
Парткод:	1459869

Деталь:	POROUS PAD,INK EJ/LOWER
Парткод:	1459874

Деталь:	STOPPER,TUBE
Парткод:	1459875

Деталь:	COVER,INK EJ
Парткод:	1459873

Деталь:	POROUS PAD,CAP,LOWER, B
Парткод:	1470961

Деталь:	POROUS PAD,INK EJ,FB,UPPER, C
Парткод:	1484639

Деталь:	DETECTOR,PE
Парткод:	2116016

Деталь:	SPUR GEAR,13.5
Парткод:	1436876

Деталь:	BOARD ASSY.,ENCODER
Парткод:	2116014

Деталь:	POROUS PAD,INK EJ,FB,LOWER, C
Парткод:	1484641

Деталь:	PRINT HEAD
Парткод:	F182000

Деталь:	LABEL,POSITION,CARTRIDGE
Парткод:	1464551

Деталь:	COVER,CABLE,HEAD
Парткод:	1459779

Деталь:	HINGE,COVER,CARTRIDGE
Парткод:	1430589

Деталь:	COMPRESSION SPRING,3.39
Парткод:	1482069

Деталь:	HINGE,ASSY.
Парткод:	1438858

Деталь:	HINGE,ASSY., B
Парткод:	1438860

Деталь:	CABLE,ENCODER,PF
Парткод:	2116731

Деталь:	COVER,CABLE,HEAD,INNER
Парткод:	1459776

Деталь:	GUIDE,HINGE
Парткод:	1435766

Деталь:	COMBINATION GEAR,16.8,9
Парткод:	1464397

Деталь:	ROLLER,PF,ADF
Парткод:	1464359

Деталь:	BUSHING,EJ,ADF
Парткод:	1464378

Деталь:	SPUR GEAR,10
Парткод:	1464396

Деталь:	HOLDER,ROLLER,DRIVEN,EJ,ADF
Парткод:	1464360

Деталь:	ROLLER,DRIVEN,ADF
Парткод:	1464371

Деталь:	COMPRESSION SPRING,6.28
Парткод:	1467115

Деталь:	COVER,CABLE,ADF
Парткод:	1464386

Деталь:	COVER,CABLE,SUPPORT,ADF
Парткод:	1464387

Деталь:	GUIDE,I/C, F
Парткод:	1459778

Деталь:	HOLDER,DRIVEN ASSY., IEI
Парткод:	1468050

Деталь:	COVER,ADF ASSY., IEI,ASP
Парткод:	1495173

Деталь:	CLEANER,HEAD, ASP
Парткод:	1477298

Деталь:	SUB CR ASSY., IEI
Парткод:	1475097

Деталь:	POROUS PAD,PAPER GUIDE,FRONT, ASP
Парткод:	1476501

Деталь:	DIFFUSION SHEET,INK EJECT, ASP
Парткод:	1473327

Деталь:	ROLLER,PF ASSY., IEI
Парткод:	1466016

Деталь:	SCALE,PF ASSY., IEI
Парткод:	1471717

Деталь:	INK SYSTEM ASSY., IEI
Парткод:	1466180

Деталь:	COVER,CARTRIDGE ASSY., IEI
Парткод:	1466189

Деталь:	HOPPER ASSY., IEI
Парткод:	1480769

Деталь:	ASF UNIT., B, IEI
Парткод:	1491448

Деталь:	HOLDER,BOARD ASSY., IEI
Парткод:	1466183

Деталь:	MOTOR,ASSY.,PF
Парткод:	2117627

Деталь:	MOTOR,ASSY,CR
Парткод:	2116729

Деталь:	LCD ASSY., IEI
Парткод:	1468044

Деталь:	SCANNER UNIT, IEI,ASP
Парткод:	2122722

Деталь:	ADF UNIT, IEI,ASP
Парткод:	2122999

Деталь:	PAPER PASS ASSY., IEI,ASP
Парткод:	1490634

Деталь:	BASE,ADF ASSY., IEI,ASP
Парткод:	1477300

Деталь:	PRINTER MECHANISM (ASP)
Парткод:	2122402

Деталь:	EDGE GUIDE,FRONT
Парткод:	1464318

Деталь:	EDGE GUIDE,REAR
Парткод:	1464319

Деталь:	SPUR GEAR,12.8
Парткод:	1464320

Коды ошибок

Описание

Парткод

Название

EPSON T0711 Картридж черный

EPSON T0711H Картридж черный увеличенной емкости, двойная упаковка

EPSON T0712 Картридж голубой

EPSON T0713 Картридж пурпурный

EPSON T0714 Картридж желтый

EPSON T0715 Набор картриджей T0711-714

Error code:	01
Display:	ERROR CONDITION INVALID HEAD
Description:	The ERROR light flashes.
Causes:	The printhead was replaced with one that is not a genuine Zebra™ printhead.
Remedy:	Install a genuine Zebra printhead.

Error code:	02
Display:	ERROR CONDITION RIBBON OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly.
Remedy:	Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73.

Error code:	03
Display:	WARNING RIBBON IN
Description:	The ERROR light flashes.
Causes:	Ribbon is loaded, but the printer is set for direct thermal mode.
Remedy:	Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81.

Error code:	04
Display:	ERROR CONDITION PAPER OUT
Description:	The printer stops; the ERROR light flashes.
Causes:	The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded.
Remedy:	Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration.

Error code:	05
Display:	ERROR CONDITION HEAD OPEN
Description:	The printer stops; the ERROR light flashes.
Causes:	The printhead is not fully closed. The head open sensor is not working properly.
Remedy:	Replace the sensor.

Error code:	06
Display:	THERMISTOR FAULT
Description:	The ERROR light flashes.
Causes:	The printhead has a faulty thermistor.
Remedy:	Replace the printhead.

Error code:	07
Display:	WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD
Description:	The printer stops; the ERROR light is on; the printer cycles through these three messages.
Causes:	The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Error code:	08
Display:	WARNING HEAD COLD
Description:	The printer prints while the ERROR light flashes.
Causes:	The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor.
Remedy:	Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead.

Error code:	09
Display:	WARNING HEAD TOO HOT
Description:	The printer stops; the ERROR light flashes.
Causes:	The printhead is over temperature.
Remedy:	Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature.

Error code:	10
Display:	DEFRAGMENTING
Description:	The printer stops.
Causes:	The printer is defragmenting memory.
Remedy:	Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service.

Error code:	11
Display:	ERROR CONDITION CUTTER JAM
Description:	The printer stops; the ERROR light flashes.
Causes:	Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path.
Remedy:	Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135.

Error code:	12
Description:	General print quality issues
Causes:	The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced.
Remedy:	For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance.

Error code:	13
Description:	Long tracks of missing print on several labels
Causes:	Print element damaged.
Remedy:	Replace the printhead.

Error code:	14
Description:	Wrinkled ribbon
Causes:	Ribbon fed through the machine incorrectly. Incorrect burn temperature. Incorrect or uneven printhead pressure. Media not feeding properly; walking from side to side. The strip plate needs adjusting. The printhead needs vertical adjustment. The printhead is improperly balanced. The printhead and platen roller need to be realigned.
Remedy:	See Load Ribbon on page 64. Set the darkness to the lowest possible setting for good print quality. See Adjust Print Darkness on page 78. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Make sure that media is snug by adjusting the media guide, or call a service technician. Adjust the printhead balance.

Error code:	15
Description:	Printing too light or too dark over the entire label
Causes:	The media or ribbon is not designed for high-speed operation. You are using an incorrect combination of media and ribbon for your application. You are using ribbon with direct thermal media. Incorrect or uneven printhead pressure.
Remedy:	Replace supplies with those recommended for high-speed operation. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. Direct thermal media does not require ribbon. To check if you are using direct thermal media, perform the label scratch test in When to Use Ribbon on page 62. Set the pressure to the minimum needed. See Adjust Printhead Pressure on page 70.

Error code:	16
Description:	Smudge marks on labels
Causes:	The media or ribbon is not designed for high-speed operation.
Remedy:	Replace supplies with those recommended for high-speed operation.

Error code:	17
Description:	Misregistration/skips labels
Causes:	The printer is not calibrated. Improper label format.
Remedy:	Recalibrate the printer. Use correct label format.

Error code:	18
Description:	Misregistration and misprint of one to three labels
Causes:	The platen roller is dirty. Media does not meet specifications.
Remedy:	See Clean the Printhead and Platen Roller on page 131. Use media that meets specifications.

Error code:	19
Description:	Vertical drift in top-of-form position
Causes:	The printer is out of calibration. Vertical drift occurs during normal printer operation. Note • A vertical drift of ± 4 to 6 dot rows (approximately 0.5 mm) is within normal tolerances. The platen roller is dirty.
Remedy:	Recalibrate the printer. Calibrate the printer. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131.

Error code:	20
Description:	Vertical image or label drift
Causes:	The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media.
Remedy:	Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation.

Epson Stylus DX9400F

Модули

Детали

Коды ошибок

Описание

Парткод

Название

Позвонить

Написать

Спасибо за ваше сообщение!

Оставить заявку