Epson Stylus Pro 10600
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
пьезоэлектрическая струйная
Макс. формат
A0
Число страниц в месяц
20000
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Цветность печати |
цветная |
Тип устройства |
Принтер |
Технология печати |
пьезоэлектрическая струйная |
Тип |
струйный |
Печать фотографий |
|
Сканер |
|
Факс |
|
Телефон |
|
Копир |
|
Размещение |
напольный |
Число страниц в месяц |
20 000 |
Макс. формат |
A0 |
Область применения |
малый офис |
Принтер |
|
Количество цветов |
6 |
Мин, объем капли |
4 пл |
Макс. ширина рулона |
42 дюйм, (107 см) |
Прямая печать |
|
Пигментные чернила |
|
Печать без полей |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
| По X | 1 440 |
Макс, разрешение для цветной печати |
|
| По Y | 720 |
Сканер |
|
Стандарт TWAIN |
|
Стандарт WIA |
|
Отправка изображения по e-mail |
|
Печать на: |
|
| Этикетках |
|
| Пленках |
|
| Карточках |
|
| CD/DVD |
|
| Конвертах |
|
| Глянцевой бумаге |
|
| Матовой бумаге |
|
| Рулоне |
|
| Фотобумаге |
|
Факс |
|
Цветной |
|
Телефон |
|
Стандарт DECT |
|
Спикерфон |
|
АОН |
|
Автоответчик |
|
Caller ID |
|
Беспроводная трубка |
|
Проводная трубка |
|
Языки управления |
|
| PCL 6 |
|
| PCL 5e |
|
| PCL 5c |
|
| PostScript 2 |
|
| PostScript 3 |
|
| PostScript |
|
|
|
|
| PPDS |
|
Финишер |
|
Брошюровщик |
|
Электронная сортировка |
|
Сортировка со сдвигом |
|
Степлер |
|
Сортер |
|
Интерфейсы |
|
LPT |
|
Устройство для чтения карт памяти |
|
RS-232 |
|
Инфракрасный порт |
|
Bluetooth |
|
Wi-Fi |
|
USB |
|
Ethernet (RJ-45) |
|
FireWire (IEEE 1394) |
|
Версия USB |
2,0 |
Память/Процессор |
|
Макс, объем памяти |
128 |
Объем памяти |
128 |
Дополнительная информация |
|
Мин. системные требования |
Intel Pentium II |
Поддержка ОС |
|
| Windows |
|
| DOS |
|
| Linux |
|
| Mac OS |
|
Потребляемая мощность |
|
| При работе | 131 |
Габариты |
|
Ширина |
1 865 |
Глубина |
1 255 |
Высота |
710 |
Вес |
165 |
Модули
COVER ASSY
FRAME ASSY (1)
CABLE GUIDE ASSY
I / H ASSY
HEAD ASSY
VACUUM SWITCH ASSY
BOARD BASE ASSY
SPINDLE ASSY
INK SYSTEM ASSY
CR RALE ASSY
FRAME ASSY (2)
Детали VACUUM SWITCH ASSY
| Деталь: | DISCHARGE CARTRIDGE,WITH0UT INDIVIDUAL B0X |
| Парткод: | 1060627 |
| Деталь: | DRAINING CARTRIDGE |
| Парткод: | 1155755 |
| Деталь: | CLEANING CARTRIDGE,4CB33C |
| Парткод: | 1214261 |
| Деталь: | WASTE INK TANK REM0VEAL T00L |
| Парткод: | 1235340 |
| Деталь: | PRINT HEAD INSTALLATI0N GUIDE |
| Парткод: | 1235341 |
| Деталь: | INK TUBE REM0VAL ATTACHMENT |
| Парткод: | 1235342 |
| Деталь: | B0ARD INSTALLATI0N GUIDE |
| Парткод: | 1235343 |
| Деталь: | FEED ADJUSTMENT GAUDE |
| Парткод: | 1235344 |
| Деталь: | PRESS ASSY P0SITI0N T00L |
| Парткод: | 1277073 |
| Деталь: | T0RQUE WRENCH 1.25/1.75 |
| Парткод: | 1277142 |
| Деталь: | CABLE SUPP0RT |
| Парткод: | 1277143 |
| Деталь: | FFC INSTALLATI0N GUIDE |
| Парткод: | 1277144 |
| Деталь: | PC MEM0RY CARD |
| Парткод: | 1299064 |
| Деталь: | LOGO PLATE 13X54 |
| Парткод: | 1062373 |
| Деталь: | LABEL,MODEL NAME, E |
| Парткод: | 1304723 |
| Деталь: | LABEL,PAPER LEVER SET UP, B |
| Парткод: | 1063520 |
| Деталь: | LABEL,HAND POSITION |
| Парткод: | 1213254 |
| Деталь: | LABEL,NK COLOR |
| Парткод: | 1063446 |
| Деталь: | LABEL,PAPER JAM/CUTTER CHANGE |
| Парткод: | 1213250 |
| Деталь: | LABEL,ROLL PAPER SET |
| Парткод: | 1213246 |
| Деталь: | LABEL,BOAD PAPER SET |
| Парткод: | 1213248 |
| Деталь: | LABEL,CUT PAPER SET |
| Парткод: | 1213244 |
| Деталь: | LABEL,CUT POSITION |
| Парткод: | 1063708 |
| Деталь: | LABEL,CAUTION,STEEL BELT |
| Парткод: | 1213257 |
| Деталь: | LABEL,CAUTION,CUTTER |
| Парткод: | 1213256 |
| Деталь: | LABEL,CUTTER CHANGE2 |
| Парткод: | 1213251 |
| Деталь: | LABEL,ROLL PAPER SET 2 INCH |
| Парткод: | 1213258 |
| Деталь: | LABEL,HIGH TENSION SPINDLE, C |
| Парткод: | 1059886 |
| Деталь: | LABEL,ROLL PAPER SET 3 INCH |
| Парткод: | 1213259 |
| Деталь: | H TOP COVER |
| Парткод: | 1063231 |
| Деталь: | ROLL SIDE COVER R |
| Парткод: | 1231314 |
| Деталь: | S.E PROTECTION BRASH |
| Парткод: | 1063223 |
| Деталь: | CATCH |
| Парткод: | 1063224 |
| Деталь: | ROLL SIDE COVER L |
| Парткод: | 1231313 |
| Деталь: | FRONT COVER |
| Парткод: | 1063232 |
| Деталь: | I/H COVER ASSY |
| Парткод: | 1063241 |
| Деталь: | SIDE COVER R |
| Парткод: | 1231312 |
| Деталь: | FRONT COVER DAMPER R |
| Парткод: | 1063226 |
| Деталь: | FRONT COVER DAMPER L |
| Парткод: | 1063227 |
| Деталь: | SIDE COVER ASSY. |
| Парткод: | 1231283 |
| Деталь: | CR COVER |
| Парткод: | 1063238 |
| Деталь: | I/H COVER GEAR L-ASSY |
| Парткод: | 1063230 |
| Деталь: | I/H COVER GEAR R-ASSY |
| Парткод: | 1063239 |
| Деталь: | R INSIDE COVER |
| Парткод: | 1231315 |
| Деталь: | FRONT COVER CAM |
| Парткод: | 1063228 |
| Деталь: | COVER SENSOR R ASSY |
| Парткод: | 2047890 |
| Деталь: | COVER SENSOR L ASSY |
| Парткод: | 2047889 |
| Деталь: | PANEL FCC |
| Парткод: | 2047891 |
| Деталь: | PRESS LEVER |
| Парткод: | 1231316 |
| Деталь: | MINI CLAMP |
| Парткод: | 1063225 |
| Деталь: | PANEL ASSY.(OVERSEAS) |
| Парткод: | 2080496 |
| Деталь: | ROLL TOP COVER |
| Парткод: | 1071249 |
| Деталь: | SENSER COVER R ASSY |
| Парткод: | 2049623 |
| Деталь: | SENSER COVER L ASSY |
| Парткод: | 2049624 |
| Деталь: | LOGO PLATE 13X54 |
| Парткод: | 1062373 |
| Деталь: | LABEL,MODEL NAME, E |
| Парткод: | 1304723 |
| Деталь: | LABEL,PAPER LEVER SET UP, B |
| Парткод: | 1063520 |
| Деталь: | LABEL,HAND POSITION |
| Парткод: | 1213254 |
| Деталь: | LABEL,NK COLOR |
| Парткод: | 1063446 |
| Деталь: | LABEL,PAPER JAM/CUTTER CHANGE |
| Парткод: | 1213250 |
| Деталь: | LABEL,ROLL PAPER SET |
| Парткод: | 1213246 |
| Деталь: | LABEL,BOAD PAPER SET |
| Парткод: | 1213248 |
| Деталь: | LABEL,CUT PAPER SET |
| Парткод: | 1213244 |
| Деталь: | LABEL,CUT POSITION |
| Парткод: | 1063708 |
| Деталь: | LABEL,CAUTION,STEEL BELT |
| Парткод: | 1213257 |
| Деталь: | LABEL,CAUTION,CUTTER |
| Парткод: | 1213256 |
| Деталь: | LABEL,CUTTER CHANGE2 |
| Парткод: | 1213251 |
| Деталь: | LABEL,ROLL PAPER SET 2 INCH |
| Парткод: | 1213258 |
| Деталь: | LABEL,HIGH TENSION SPINDLE, C |
| Парткод: | 1059886 |
| Деталь: | LABEL,ROLL PAPER SET 3 INCH |
| Парткод: | 1213259 |
| Деталь: | TUBE,SUPPLY,INK,B |
| Парткод: | 1058967 |
| Деталь: | TUBE,SUPPLY,INK,C |
| Парткод: | 1058968 |
| Деталь: | TUBE,SUPPLY,INK,LC |
| Парткод: | 1058972 |
| Деталь: | TUBE,SUPPLY,INK,LM |
| Парткод: | 1058970 |
| Деталь: | TUBE,SUPPLY,INK,M |
| Парткод: | 1058969 |
| Деталь: | TUBE,SUPPLY,INK,Y |
| Парткод: | 1058971 |
| Деталь: | CR FFC1 |
| Парткод: | 2047887 |
| Деталь: | TUBE FILM |
| Парткод: | 1063208 |
| Деталь: | SUS SUPPORT |
| Парткод: | 1063207 |
| Деталь: | CR FFC2 |
| Парткод: | 2047888 |
| Деталь: | JOINT SCREWS,M6 |
| Парткод: | 1033482 |
| Деталь: | O RING,TUBE FASTEN |
| Парткод: | 1033483 |
| Деталь: | JOINT,M6 |
| Парткод: | 1213137 |
| Деталь: | FILM,FFC,STOPPER |
| Парткод: | 1063210 |
| Деталь: | FILM,TUBE,STOPPER |
| Парткод: | 1063209 |
| Деталь: | CABLE STOPPER |
| Парткод: | 1063213 |
| Деталь: | TUBE PROTECTION |
| Парткод: | 1063211 |
| Деталь: | TUBE,PIPE STOPPER |
| Парткод: | 1063215 |
| Деталь: | OUTLET ROLLER BOARD ASSY |
| Парткод: | 1063156 |
| Деталь: | TUBE BINDER |
| Парткод: | 1063157 |
| Деталь: | CABLE GUIDE BOARD |
| Парткод: | 1063155 |
| Деталь: | I/C BOARD SPRING |
| Парткод: | 1063182 |
| Деталь: | I/C LEVER KNOB |
| Парткод: | 1063183 |
| Деталь: | I/H COVER SWITCH ASSY |
| Парткод: | 2047873 |
| Деталь: | BOARD ASSY.,CSIC |
| Парткод: | 2036775 |
| Деталь: | CSIC FFC |
| Парткод: | 2047880 |
| Деталь: | K CARTRIDGE FFC |
| Парткод: | 2047874 |
| Деталь: | C CARTRIDGE FFC |
| Парткод: | 2047875 |
| Деталь: | M CARTRIDGE FFC |
| Парткод: | 2047876 |
| Деталь: | LC CARTRIDGE FFC |
| Парткод: | 2047877 |
| Деталь: | LM CARTRIDGE FFC |
| Парткод: | 2047878 |
| Деталь: | Y CARTRIDGE FFC |
| Парткод: | 2047879 |
| Деталь: | HOLDER ASSY.,IC, B |
| Парткод: | 1213139 |
| Деталь: | MINI LATCH |
| Парткод: | 1063181 |
| Деталь: | CKS CLAMP |
| Парткод: | 1063184 |
| Деталь: | TUBE,IC |
| Парткод: | 1058973 |
| Деталь: | FLAT CORE |
| Парткод: | 1071260 |
| Деталь: | FERRITE CLAMP |
| Парткод: | 1071258 |
| Деталь: | FG CLAMP |
| Парткод: | 1071253 |
| Деталь: | FERRITE CLAMP |
| Парткод: | 1071256 |
| Деталь: | WIRE LOCK SADDLE |
| Парткод: | 1063146 |
| Деталь: | JOINT SCREWS,M6 |
| Парткод: | 1033482 |
| Деталь: | O RING,TUBE FASTEN |
| Парткод: | 1033483 |
| Деталь: | JOINT,M6 |
| Парткод: | 1213137 |
| Деталь: | POROUS PAD,FRAME,B |
| Парткод: | 1271113 |
| Деталь: | ROLL BAND |
| Парткод: | 1055028 |
| Деталь: | I/C WITHIN INDIVIDUAL BXBD,500,0VERSEAS |
| Парткод: | 1062226 |
| Деталь: | I/C WITHIN INDIVIDUAL BXYD500,0VERSEAS |
| Парткод: | 1062227 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,M,D,500,0VERSEAS |
| Парткод: | 1062228 |
| Деталь: | I/C WITHIN INDIVIDUAL BOX,C,D,500,OVERSEAS |
| Парткод: | 1062229 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,LM,D,500,0VERSEAS |
| Парткод: | 1062230 |
| Деталь: | I/C WITHIN INDIVIDUAL BOX,LC,D,500,OVERSEAS |
| Парткод: | 1062231 |
| Деталь: | I/C,WITHIN INDIVIDUAL B0X,B,P,500,0VERSEAS |
| Парткод: | 1062238 |
| Деталь: | I/C,WITHIN INDIVIDUAL B0X,Y,P,500,0VERSEAS |
| Парткод: | 1062239 |
| Деталь: | I/C,WITHIN INDIVIDUAL B0X,M,P,500,0VERSEAS |
| Парткод: | 1062240 |
| Деталь: | I/C,WITHIN INDIVIDUAL B0X,C,P,500,0VERSEAS |
| Парткод: | 1062241 |
| Деталь: | I/C,WITHIN INDIVIDUAL B0X,LM,P,500,0VERSEAS |
| Парткод: | 1062242 |
| Деталь: | I/C,WITHIN INDIVIDUAL B0X,LC,P,500,0VERSEAS |
| Парткод: | 1062243 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,PB,H,500,0VERSEAS |
| Парткод: | 1155881 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,C,H,500,0VERSEAS |
| Парткод: | 1155882 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,M,H,500,0VERSEAS |
| Парткод: | 1155883 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,Y,H,500,0VERSEAS |
| Парткод: | 1155884 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,LC,H,500,0VERSEAS |
| Парткод: | 1155885 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,LM,H,500,0VERSEAS |
| Парткод: | 1155886 |
| Деталь: | I/C WITHIN INDIVIDUAL B0X,MB,H,500,0VERSEAS |
| Парткод: | 1155887 |
| Деталь: | MAGIC BAND |
| Парткод: | 1277613 |
| Деталь: | P/S B0RAD ASSY |
| Парткод: | 2047869 |
| Деталь: | PRINT HEAD SET |
| Парткод: | F086031 |
| Деталь: | CUTTER SOLENOID ASSY |
| Парткод: | 1063216 |
| Деталь: | P EDGE SENSOR ASSY |
| Парткод: | 2047885 |
| Деталь: | COMPRESSION SPRING,9.9 |
| Парткод: | 1030787 |
| Деталь: | HEAD ADJUSTOR BOARD A |
| Парткод: | 1063203 |
| Деталь: | HEAD ADJUSTOR BOARD B |
| Парткод: | 1063202 |
| Деталь: | ECCENTRIC SHAFT GEAR |
| Парткод: | 1063201 |
| Деталь: | HEAD ADJUSTOR SPRING |
| Парткод: | 1063204 |
| Деталь: | SCREW CAP |
| Парткод: | 1063205 |
| Деталь: | FG CABLE |
| Парткод: | 2047864 |
| Деталь: | HEAD STOPPER |
| Парткод: | 1063206 |
| Деталь: | CR ENC ASSY |
| Парткод: | 2047884 |
| Деталь: | CUTTER HOLDER |
| Парткод: | 1063217 |
| Деталь: | SOLENOID SPRING |
| Парткод: | 1063220 |
| Деталь: | CUTTER SOLENOID |
| Парткод: | 1063219 |
| Деталь: | CUTTER SPRING |
| Парткод: | 1063222 |
| Деталь: | CUTTER CAP |
| Парткод: | 1063218 |
| Деталь: | PG ADJUSTOR LEVER L |
| Парткод: | 1063196 |
| Деталь: | PG CAM SHAFT SPASER |
| Парткод: | 1063197 |
| Деталь: | SLIDE ECCENTRIC CAM |
| Парткод: | 1063198 |
| Деталь: | PG ADJUSTOR LEVER R |
| Парткод: | 1063199 |
| Деталь: | PG DRIVEN GEAR |
| Парткод: | 1063200 |
| Деталь: | FG CABLE |
| Парткод: | 2047886 |
| Деталь: | CR ASSY. |
| Парткод: | 1277733 |
| Деталь: | ROLLER PRESSER PLATE ASSY. |
| Парткод: | 1242715 |
| Деталь: | BOARD ASSY.,INTERFACE |
| Парткод: | 2056362 |
| Деталь: | PRESS LEVER SHAFT |
| Парткод: | 1063193 |
| Деталь: | BOARD ASSY.,INTERFACE |
| Парткод: | 2033353 |
| Деталь: | PRESS LEVER GEAR |
| Парткод: | 1063190 |
| Деталь: | PRESS LEVER |
| Парткод: | 1063192 |
| Деталь: | PRESS LEVER SPRING |
| Парткод: | 1063191 |
| Деталь: | CR MOTER ASSY |
| Парткод: | 2047865 |
| Деталь: | CR DRIVEN PULLEY ASSY |
| Парткод: | 1063186 |
| Деталь: | STOPPER RUBBER |
| Парткод: | 1063187 |
| Деталь: | TIMING FENCE SPRING |
| Парткод: | 1063188 |
| Деталь: | PRESS LEVER SENSOR CABLE ASSY |
| Парткод: | 2047883 |
| Деталь: | CR ORIGIN SENSOR CABLE ASSY |
| Парткод: | 2047881 |
| Деталь: | P THICK SENSOR CABLE ASSY |
| Парткод: | 2047882 |
| Деталь: | CR MOTOR CABLE ASSY |
| Парткод: | 2047866 |
| Деталь: | DETECTOR ARM ASSY |
| Парткод: | 1063194 |
| Деталь: | STEEL BELT ASSY |
| Парткод: | 1063195 |
| Деталь: | PHOTO SENSOR |
| Парткод: | 2047868 |
| Деталь: | FERRITE CLAMP |
| Парткод: | 1071261 |
| Деталь: | SCALE,CR |
| Парткод: | 1060844 |
| Деталь: | ROLLER,DRIVEN, D |
| Парткод: | 1038961 |
| Деталь: | WIRE LOCK SADDLE |
| Парткод: | 1063146 |
| Деталь: | BEARING STOPPER ASSY. |
| Парткод: | 1269576 |
| Деталь: | PRESS ROLLER ASSY. |
| Парткод: | 1277732 |
| Деталь: | P FRONT SENSOR ASSY |
| Парткод: | 2047871 |
| Деталь: | SHUTTER GEAR1 |
| Парткод: | 1063174 |
| Деталь: | SHUTTER GEAR2 |
| Парткод: | 1063175 |
| Деталь: | SHUTTER GEAR3 |
| Парткод: | 1063176 |
| Деталь: | SHUTTER SPRING |
| Парткод: | 1063178 |
| Деталь: | SHUTTER CAM |
| Парткод: | 1063177 |
| Деталь: | SHUTTER |
| Парткод: | 1063173 |
| Деталь: | SHUTTER SENSOR CABLE ASSY |
| Парткод: | 2047872 |
| Деталь: | AIR SHIELD D |
| Парткод: | 1063179 |
| Деталь: | AIR SHIELD E |
| Парткод: | 1063180 |
| Деталь: | POST HEADER ASSY |
| Парткод: | 1063168 |
| Деталь: | P FRONT JANCTION CABLE |
| Парткод: | 2047861 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1063145 |
| Деталь: | PHOTO SENSOR |
| Парткод: | 2047868 |
| Деталь: | SLIDE MOTOR BOARD ASSY |
| Парткод: | 1063171 |
| Деталь: | PUMP ASSY.,SUPPLY |
| Парткод: | 1058924 |
| Деталь: | ONE TOUCH BUSH |
| Парткод: | 1063172 |
| Деталь: | DETECTOR ASSY.,DOT, ASP |
| Парткод: | 1083491 |
| Деталь: | PUMP CAP UNIT ASSY., C |
| Парткод: | 1212548 |
| Деталь: | SLID SENSOR ASSY |
| Парткод: | 2047870 |
| Деталь: | FG CABLE |
| Парткод: | 2047863 |
| Деталь: | GROUNDING PLATE,I/F,UPPER |
| Парткод: | 1011863 |
| Деталь: | P/S C CABLE ASSY |
| Парткод: | 2047859 |
| Деталь: | ROLL-UP JANCTION CABLE |
| Парткод: | 2047862 |
| Деталь: | FAN ASSY. |
| Парткод: | 2073108 |
| Деталь: | HJHK FG BOARD SPRING |
| Парткод: | 1063240 |
| Деталь: | DC CABLE ASSY |
| Парткод: | 2047860 |
| Деталь: | COOLING FAN 1 CABLE ASSY |
| Парткод: | 2047857 |
| Деталь: | COOLING FAN 2 CABLE ASSY |
| Парткод: | 2047858 |
| Деталь: | SILENT DUCT |
| Парткод: | 1090895 |
| Деталь: | COOLING FAN SEAL |
| Парткод: | 1071273 |
| Деталь: | SHIELD PLATE,1 |
| Парткод: | 1060652 |
| Деталь: | SHIELD PLATE,2 |
| Парткод: | 1060653 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2036963 |
| Деталь: | WIRE LOCK SADDLE |
| Парткод: | 1063146 |
| Деталь: | POST HEAD ASSY |
| Парткод: | 1063144 |
| Деталь: | FCC CLIP |
| Парткод: | 1063169 |
| Деталь: | TRANSISTOR |
| Парткод: | 2008784 |
| Деталь: | BEADS CORE |
| Парткод: | 2025669 |
| Деталь: | MICROCONTROLLER |
| Парткод: | 2037035 |
| Деталь: | ALMINIUM ELECTOROLYTIC CAPACITOR |
| Парткод: | 2035099 |
| Деталь: | DIODE |
| Парткод: | 2012708 |
| Деталь: | FUSE |
| Парткод: | 2026294 |
| Деталь: | FUSE |
| Парткод: | 2036516 |
| Деталь: | BOARD ASSY., MAIN |
| Парткод: | 2036956 |
| Деталь: | BOARD ASSY.,DRV |
| Парткод: | 2077149 |
| Деталь: | ALMINIUM ELECTOROLYTIC CAPACITOR |
| Парткод: | 2035100 |
| Деталь: | CAPACITOR ARRAY |
| Парткод: | 2033040 |
| Деталь: | CONNECTOR |
| Парткод: | 2025675 |
| Деталь: | CONNECTOR |
| Парткод: | 2036144 |
| Деталь: | CONNECTOR 57RE-40360-830B(D7B) |
| Парткод: | 2013284 |
| Деталь: | GUIDE,/F BOARD |
| Парткод: | 1006374 |
| Деталь: | CONNECTOR |
| Парткод: | 2007160 |
| Деталь: | GUIDE,I/F BOARD |
| Парткод: | 1006374 |
| Деталь: | CONNECTOR |
| Парткод: | 2027835 |
| Деталь: | DIODE ARRAY |
| Парткод: | 2027798 |
| Деталь: | DRAM |
| Парткод: | 2031945 |
| Деталь: | TTL IC |
| Парткод: | 2029238 |
| Деталь: | EEP-ROM(BLANK) |
| Парткод: | 2036146 |
| Деталь: | PERIPHERAL IC |
| Парткод: | 2033793 |
| Деталь: | VOLTAGE REGULATOR |
| Парткод: | 2033136 |
| Деталь: | FLASH ROM |
| Парткод: | 2048570 |
| Деталь: | JUMPER CONNECTOR(X601002000) |
| Парткод: | 2052549 |
| Деталь: | CONNECTOR(X601000320) |
| Парткод: | 2053060 |
| Деталь: | CHIP RESISTOR ARRAY |
| Парткод: | 2021622 |
| Деталь: | CHIP RESISTOR ARRAY |
| Парткод: | 2021620 |
| Деталь: | CHIP RESISTOR ARRAY |
| Парткод: | 2021621 |
| Деталь: | CHIP RESISTOR ARRAY |
| Парткод: | 2021624 |
| Деталь: | CHIP CAPACITOR |
| Парткод: | 2024993 |
| Деталь: | CHIP CAPACITOR |
| Парткод: | 2018745 |
| Деталь: | OSCILLATOR |
| Парткод: | 2036458 |
| Деталь: | LED |
| Парткод: | 2017886 |
| Деталь: | ASIC |
| Парткод: | 2036147 |
| Деталь: | CMOS IC |
| Парткод: | 2036145 |
| Деталь: | CMOS IC |
| Парткод: | 2036151 |
| Деталь: | TTL IC |
| Парткод: | 2036728 |
| Деталь: | ASIC |
| Парткод: | 2037771 |
| Деталь: | CMOS IC |
| Парткод: | 2037709 |
| Деталь: | CHIP RESISTOR |
| Парткод: | 2025724 |
| Деталь: | CHIP RESISTOR |
| Парткод: | 2025373 |
| Деталь: | CHIP RESISTOR ARRAY |
| Парткод: | 2021632 |
| Деталь: | CHIP RESISTOR ARRAY |
| Парткод: | 2023269 |
| Деталь: | C.P.B-TITE SCREW |
| Парткод: | 1004142 |
| Деталь: | P/S B0RAD ASSY |
| Парткод: | 2047869 |
| Деталь: | BOARD ASSY.,INTERFACE |
| Парткод: | 2056362 |
| Деталь: | BOARD ASSY.,INTERFACE |
| Парткод: | 2033353 |
| Деталь: | FLANGE(2 INCH R) |
| Парткод: | 1053559 |
| Деталь: | FLANGE(2 INCH) |
| Парткод: | 1053560 |
| Деталь: | STOPPER SHAFT |
| Парткод: | 1108515 |
| Деталь: | E-RING,3,F/UC |
| Парткод: | 1074104 |
| Деталь: | 2INCH ROLL FEED SPINDLE (NORMAL) |
| Парткод: | 1108518 |
| Деталь: | FLANGE(3 INCH R) |
| Парткод: | 1053561 |
| Деталь: | 3INCH ROLL FEED SPINDLE(H/T) |
| Парткод: | 1108516 |
| Деталь: | 3 INCH ROLL STOPPER |
| Парткод: | 1104617 |
| Деталь: | FLANGE(3 INCH L) |
| Парткод: | 1053562 |
| Деталь: | P FRONT SENSOR ASSY |
| Парткод: | 2047871 |
| Деталь: | SHUTTER GEAR1 |
| Парткод: | 1063174 |
| Деталь: | SHUTTER GEAR2 |
| Парткод: | 1063175 |
| Деталь: | SHUTTER GEAR3 |
| Парткод: | 1063176 |
| Деталь: | SHUTTER SPRING |
| Парткод: | 1063178 |
| Деталь: | SHUTTER CAM |
| Парткод: | 1063177 |
| Деталь: | SHUTTER |
| Парткод: | 1063173 |
| Деталь: | SHUTTER SENSOR CABLE ASSY |
| Парткод: | 2047872 |
| Деталь: | AIR SHIELD D |
| Парткод: | 1063179 |
| Деталь: | AIR SHIELD E |
| Парткод: | 1063180 |
| Деталь: | POST HEADER ASSY |
| Парткод: | 1063168 |
| Деталь: | P FRONT JANCTION CABLE |
| Парткод: | 2047861 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1063145 |
| Деталь: | PHOTO SENSOR |
| Парткод: | 2047868 |
| Деталь: | SLIDE MOTOR BOARD ASSY |
| Парткод: | 1063171 |
| Деталь: | PUMP ASSY.,SUPPLY |
| Парткод: | 1058924 |
| Деталь: | ONE TOUCH BUSH |
| Парткод: | 1063172 |
| Деталь: | DETECTOR ASSY.,DOT, ASP |
| Парткод: | 1083491 |
| Деталь: | PUMP CAP UNIT ASSY., C |
| Парткод: | 1212548 |
| Деталь: | SLID SENSOR ASSY |
| Парткод: | 2047870 |
| Деталь: | FG CABLE |
| Парткод: | 2047863 |
| Деталь: | PRINT HEAD SET |
| Парткод: | F086031 |
| Деталь: | CUTTER SOLENOID ASSY |
| Парткод: | 1063216 |
| Деталь: | P EDGE SENSOR ASSY |
| Парткод: | 2047885 |
| Деталь: | COMPRESSION SPRING,9.9 |
| Парткод: | 1030787 |
| Деталь: | HEAD ADJUSTOR BOARD A |
| Парткод: | 1063203 |
| Деталь: | HEAD ADJUSTOR BOARD B |
| Парткод: | 1063202 |
| Деталь: | ECCENTRIC SHAFT GEAR |
| Парткод: | 1063201 |
| Деталь: | HEAD ADJUSTOR SPRING |
| Парткод: | 1063204 |
| Деталь: | SCREW CAP |
| Парткод: | 1063205 |
| Деталь: | FG CABLE |
| Парткод: | 2047864 |
| Деталь: | HEAD STOPPER |
| Парткод: | 1063206 |
| Деталь: | CR ENC ASSY |
| Парткод: | 2047884 |
| Деталь: | CUTTER HOLDER |
| Парткод: | 1063217 |
| Деталь: | SOLENOID SPRING |
| Парткод: | 1063220 |
| Деталь: | CUTTER SOLENOID |
| Парткод: | 1063219 |
| Деталь: | CUTTER SPRING |
| Парткод: | 1063222 |
| Деталь: | CUTTER CAP |
| Парткод: | 1063218 |
| Деталь: | PG ADJUSTOR LEVER L |
| Парткод: | 1063196 |
| Деталь: | PG CAM SHAFT SPASER |
| Парткод: | 1063197 |
| Деталь: | SLIDE ECCENTRIC CAM |
| Парткод: | 1063198 |
| Деталь: | PG ADJUSTOR LEVER R |
| Парткод: | 1063199 |
| Деталь: | PG DRIVEN GEAR |
| Парткод: | 1063200 |
| Деталь: | FG CABLE |
| Парткод: | 2047886 |
| Деталь: | CR ASSY. |
| Парткод: | 1277733 |
| Деталь: | ROLLER PRESSER PLATE ASSY. |
| Парткод: | 1242715 |
| Деталь: | PRESS LEVER SHAFT |
| Парткод: | 1063193 |
| Деталь: | PRESS LEVER GEAR |
| Парткод: | 1063190 |
| Деталь: | PRESS LEVER |
| Парткод: | 1063192 |
| Деталь: | PRESS LEVER SPRING |
| Парткод: | 1063191 |
| Деталь: | CR MOTER ASSY |
| Парткод: | 2047865 |
| Деталь: | CR DRIVEN PULLEY ASSY |
| Парткод: | 1063186 |
| Деталь: | STOPPER RUBBER |
| Парткод: | 1063187 |
| Деталь: | TIMING FENCE SPRING |
| Парткод: | 1063188 |
| Деталь: | PRESS LEVER SENSOR CABLE ASSY |
| Парткод: | 2047883 |
| Деталь: | CR ORIGIN SENSOR CABLE ASSY |
| Парткод: | 2047881 |
| Деталь: | P THICK SENSOR CABLE ASSY |
| Парткод: | 2047882 |
| Деталь: | CR MOTOR CABLE ASSY |
| Парткод: | 2047866 |
| Деталь: | DETECTOR ARM ASSY |
| Парткод: | 1063194 |
| Деталь: | STEEL BELT ASSY |
| Парткод: | 1063195 |
| Деталь: | PHOTO SENSOR |
| Парткод: | 2047868 |
| Деталь: | FERRITE CLAMP |
| Парткод: | 1071261 |
| Деталь: | SCALE,CR |
| Парткод: | 1060844 |
| Деталь: | ROLLER,DRIVEN, D |
| Парткод: | 1038961 |
| Деталь: | WIRE LOCK SADDLE |
| Парткод: | 1063146 |
| Деталь: | BEARING STOPPER ASSY. |
| Парткод: | 1269576 |
| Деталь: | PRESS ROLLER ASSY. |
| Парткод: | 1277732 |
| Деталь: | LOGO PLATE 13X54 |
| Парткод: | 1062373 |
| Деталь: | LABEL,MODEL NAME, E |
| Парткод: | 1304723 |
| Деталь: | LABEL,PAPER LEVER SET UP, B |
| Парткод: | 1063520 |
| Деталь: | LABEL,HAND POSITION |
| Парткод: | 1213254 |
| Деталь: | LABEL,NK COLOR |
| Парткод: | 1063446 |
| Деталь: | LABEL,PAPER JAM/CUTTER CHANGE |
| Парткод: | 1213250 |
| Деталь: | LABEL,ROLL PAPER SET |
| Парткод: | 1213246 |
| Деталь: | LABEL,BOAD PAPER SET |
| Парткод: | 1213248 |
| Деталь: | LABEL,CUT PAPER SET |
| Парткод: | 1213244 |
| Деталь: | LABEL,CUT POSITION |
| Парткод: | 1063708 |
| Деталь: | LABEL,CAUTION,STEEL BELT |
| Парткод: | 1213257 |
| Деталь: | LABEL,CAUTION,CUTTER |
| Парткод: | 1213256 |
| Деталь: | LABEL,CUTTER CHANGE2 |
| Парткод: | 1213251 |
| Деталь: | LABEL,ROLL PAPER SET 2 INCH |
| Парткод: | 1213258 |
| Деталь: | LABEL,HIGH TENSION SPINDLE, C |
| Парткод: | 1059886 |
| Деталь: | LABEL,ROLL PAPER SET 3 INCH |
| Парткод: | 1213259 |
Коды ошибок
00000100
00000101
00000102
00000103
00010000
00010001
00010002
00010003
00010004
00010005
00010006
00010007
00010008
00010009
0001000A
0001000C
0001000D
0001000E
0001000F
00010010
00010012
00010013
00010014
00,010,015
00,010,016
00,010,017
00,010,018
00,010,019
0001001A
0001001B
0001001C
0001001D
0001001E
00010020
00010021
00010022
00020000
00020001
00020002
00020003
00020004
00020005
00020006
0002000B
0002000C
00030015
00030016
00030017
00030018
00030019
0003001A
0003001B
0003XXXX
0100
0101
0102
0103
100000E0
10000100
10000180
100001A0
100005C0
10000XXX
D0090000
D0110013
D0XXXXXX
Описание
| Error code: | 00000100 |
| Display: | SERVICE CALL 00000100:Waste ink tank full |
| Description: | Waste Ink pads must be replaced The waste ink pads are completely full, causing a fatal error. The printer stops printing. |
| Remedy: | Replace the following parts and reset the counters as described below • Waste Ink Pads • F Box • Pump Assembly • Cap Assembly • Cleaner, Head • From Maintenance Mode 2 enter the Counter Init. Menu and initialize the Waste Ink counter and Cleaning counter. |
| Error code: | 00000101 |
| Display: | SERVICE CALL 00000101: CR motor life (Even Ink tube life) |
| Description: | Life end of the CR Motor (includes the Ink Tubes) The number of Carriage movement cycles reached the specified upper limit. • Stylus Pro 7400/7450/7800/7880/7880C: 3,700,000 cycles • Stylus Pro 9400/9450/9800/9880/9880C: 6,300,000 cycles If the printer is used continuously ignoring the error, it may cause the following defective conditions. • The Ink Tubes become cracked causing leakage of ink • Malfunction of the Carriage due to wear of the internal part of the CR Motor |
| Remedy: | 1. Check the life count of the CR Motor Press the [Menu] button - PRINTER STATUS menu - SERVICE LIFE - CR MOTOR. • When the life is still remaining Replace the BOARD ASSY., MAIN • When the life has expired or close to the end-of-life Replace the CR MOTOR ASSY. 2. As the lifespan of the CR Motor means the lifespan of the printer, the whole printer mechanism checks and corresponding maintenance works must be carried out. Especially, the following items should be carefully checked or performed. • Check the Head FFC for any damage such as break, scratch, etc. • Check the CR Timing Belt and the PF Timing Belt for any damage. • Check if abnormal sounds are produced from the sliding surfaces of the Guide Rail and the bearings of the Carriage Unit (wear of the bearings). • Check if the paper dust or any other dust accumulates on the paper path. If it does, clean it as indicated. |
| Error code: | 00000102 |
| Display: | SERVICE CALL 00000102 :Waste ink box on the right side full |
| Description: | It is ’00,000,100’ and time in the detailed that displayed it to the LCD panel and be not fatal error. |
| Remedy: | Not necessary ("Waste ink Initialization" of maintenance mode 2 is run.) |
| Error code: | 00000103 |
| Display: | SERVICE CALL 00000103 : Waste ink box on the left side full |
| Description: | RTC (Real Time Clock) battery is defective |
| Remedy: | 1. Replace the RTC Battery located on the Main Board. 2. Replace the Main Board. |
| Error code: | 00010000 |
| Display: | SERVICE CALL 00010000: PF ENCODER CHECK ERROR |
| Description: | PF Encoder check error The printer causes this error and stops operation if it cannot detect the encoder pulse signals at intervals of the specified time during the power-on initialization operation or while the PF Motor is driving. |
| Causes: | • The PF Encoder connector is disconnected. • The PF Motor connector is disconnected. • The Encoder harness on the PF side is broken. • The wiring of the A and B phases are wrong (opposite) • The wiring of the motor is wrong (opposite) • The PF Motor shorted out. • The PF Motor is energized continuously and kept rotating abnormally. • The fuse for the motor driver is blown. (on the Main Board) • The Main Board is damaged. (+42V/+24V remote control is broken) • The Power Supply Board is damaged (42V is OFF). |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Reconnect the PF Encoder connector or the PF Motor connector securely. 3. Execute the PF Timing Belt Tension Adjustment . 4. Replace the PF Encoder Sensor . 5. Replace the PF MOTOR ASSY. . 6. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010001 |
| Display: | SERVICE CALL 00010001: PF MOTOR STEP-OUT |
| Description: | The PF Motor is out-of-step. The printer causes this error and stops operation if it cannot detect the specifiedlength encoder pulse signals within a fixed time period or when abnormally long or short pulse signals are detected while the PF Motor is rotating. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Replace the PF Encoder Sensor . 3. Replace the PF MOTOR ASSY. 4. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010002 |
| Display: | SERVICE CALL 00010002: PF MOTOR OVER CURRENT |
| Description: | Overcurrent occurred on the PF Motor. The printer causes this error and stops operation if an abnormal electric current beyond the prescribed range is detected at the PF Motor drive circuit on the BOARD ASSY.,MAIN while the PF Motor is rotating or when a current beyond the prescribed range is required to be supplied to the motor. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Replace the PF MOTOR ASSY. . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010003 |
| Display: | SERVICE CALL 00010003: PF MOTOR IN POSITION TIME OUT |
| Description: | The PF Motor out of position time-out error The printer causes this error and stops operation if it detects that the paper could not be moved to the target position within a fixed time period while the PF Motor stopping operation. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Execute the PF Timing Belt Tension Adjustment . 3. Replace the PF Encoder Sensor . 4. Replace the PF MOTOR ASSY. 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010004 |
| Display: | SERVICE CALL 00010004: CR ENCODER CHECKING ERROR |
| Description: | CR Encoder check error The printer causes this error and stops operation if it cannot detect the encoder pulse signals at intervals of the specified time during the power-on initialization operation or while the CR Motor is driving. |
| Causes: | • CR Encoder FFC is disconnected. • The CR Motor connector is disconnected. • The FFC of the encoder on the CR side is broken. • The wiring of the A and B phases are wrong (opposite) • The wiring of the CR Motor is wrong (opposite) • The CR Motor shorted out. • The fuse for the motor driver is blown. (on the Main Board) |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Reconnect the CR Encoder FFC or the CR Motor connector securely. 4. Execute the CR Timing Belt Tension Adjustment . 5. Replace the CR Encoder Sensor . 6. Replace the CR MOTOR ASSY. 7. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010005 |
| Display: | SERVICE CALL 00010005: CR MOTOR STEP-OUT |
| Description: | CR Motor is out of step. The printer causes this error and stops operation if it cannot detect the specifiedlength encoder pulse signals within a fixed time period or when abnormally long or short pulse signals are detected while the CR Motor is rotating. |
| Causes: | • The connector of the Cutter Solenoid is disconnected. • The fuse for the Solenoid is blown. (on the Main Board) • CR Motor failure • The CR Motor driver is damage. (42 V is shorted) • The temperature fuse of the Cutter Solenoid is blown (the Cutter Solenoid does not work and the Carriage cannot be unlocked.) |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Reconnect the Cutter Solenoid connector securely and correctly. 4. Execute the CR Timing Belt Tension Adjustment . 5. Replace the CR Encoder Sensor . 6. Replace the CR MOTOR ASSY. . 7. Replace the CUTTER SOLENOID ASSY. . 8. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010006 |
| Display: | SERVICE CALL 00010006: CR MOTOR OVER CURRENT |
| Description: | CR motor overcurrent Feedback from the CR motor (IC33) driver’s 10-pin output (Sense signal) indicates that the CR motor’s current is irregular. |
| Remedy: | • Check the CR cover, slightly loosen screws if necessary • Check the cutter housing, slightly loosen screws if necessary • Make sure no foreign material or ink tubes (from pump assembly) are blocking the carriage path (see “Removing the Maintenance Assembly” on page 143 for reassembly points) • Replace the CR motor • Replace the Main Board |
| Error code: | 00010007 |
| Display: | SERVICE CALL 00010007: CR MOTOR IN POSITION TIME OUT |
| Description: | The CR Motor out of position time-out error The printer causes this error and stops operation if it detects that the Carriage could not be moved to the target position within a fixed time period while the CR Motor stopping operation is performed. |
| Causes: | The Carriage movement cannot be finished due to the remaining pulses smaller than those generated by the motor out-of-step state. |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Execute the CR Timing Belt Tension Adjustment . 4. Replace the CR Encoder Sensor . 5. Replace the CR MOTOR ASSY. . 6. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010008 |
| Display: | SERVICE CALL 00010008: SERVO INTERRUPTION WATCH DOG TIME OUT ERROR |
| Description: | Servo interrupt watchdog time-out error The printer causes this error and stops operation if it detects a watchdog time-out on the DC motor drive circuit (CPU or ASIC) while the CR or PF Motor is driving. |
| Remedy: | CPU or ASIC failure can be considered as the cause of the error, replace the Main Board Assy. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010009 |
| Display: | SERVICE CALL 00010009: SYSTEM INTERRUPTION WATCH DOG TIME OUT ERROR |
| Description: | System interrupt watchdog time-out error The printer causes this error and stops operation if it detects an out-of-control state or cache failure in the CPU or ASIC while the BOARD ASSY.,MAIN is processing a print data. |
| Remedy: | CPU or ASIC failure can be considered as the cause of the error, replace the Main Board Assy. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001000A |
| Display: | SERVICE CALL 0001000A: CR HOME POSITION DETECTION ERROR |
| Description: | Carriage home position detection error The printer causes this error and stops operation if it cannot detect the Carriage home position or cannot detect it within a fixed time period during the power-on initialization operation or while performing home position detecting operation during printing. |
| Remedy: | 1. Clean dirt or foreign materials on the CR HP Sensor and check if it is damaged. 2. Replace the CR HP Sensor . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001000C |
| Display: | SERVICE CALL 0001000C: HEAD SLIDE HOME POSITION DETECTION ERROR |
| Description: | PG home position detection error The printer causes this error and stops operation if it cannot detect the PG home position during the power-on initialization operation or while performing platen gap changing operation after paper is set. |
| Causes: | • The PG HP Sensor connector is disconnected. • The Pump Motor connector is disconnected. • The Pump Motor harness is broken. • PG HP Sensor failure • Pump Motor failure • The PG drive gears are damaged. • The fuse for the motor driver is blown. (on the Main Board) |
| Remedy: | 1. Reconnect the PG HP Sensor connector or the Pump Motor connector securely. 2. Replace the PG HP Sensor . 3. Replace the PUMP CAP ASSY. . |
| Error code: | 0001000D |
| Display: | SERVICE CALL 0001000D: COVER OPEN SENSOR ERROR (00) |
| Description: | Cover sensor malfunction (00) Right sensor (HP side) One or both cover open sensors (interlock switch) located at either end of the cover shaft is malfunctioning. |
| Remedy: | Make sure the sensor(s) are properly installed. If that does not solve the problem, check the cover open sensor connection. If there still is a problem, try the following. • Replace the malfunctioning cover sensor • Replace the Main Board |
| Error code: | 0001000E |
| Display: | SERVICE CALL 0001000E: COVER OPEN SENSOR ERROR (01) |
| Description: | Cover sensor malfunction (01) Left sensor. One or both cover open sensors (interlock switch) located at either end of the cover shaft is malfunctioning. |
| Remedy: | Make sure the sensor(s) are properly installed. If that does not solve the problem, check the cover open sensor connection. If there still is a problem, try the following. • Replace the malfunctioning cover sensor • Replace the Main Board |
| Error code: | 0001000F |
| Display: | SERVICE CALL 0001000F: CRMOTOR OVER HEAT (PWMOUTPUT MALFUNCTION) |
| Description: | CR motor PWM output error |
| Remedy: | • Check the cutter housing, slightly loosen screws if necessary • Replace the Main Board. |
| Error code: | 00010010 |
| Display: | SERVICE CALL 00010010: PF MOTOR OVER HEAT (PWM OUTPUT MALFUNCTION) |
| Description: | PF motor PWM output error |
| Remedy: | • Replace the Main Board |
| Error code: | 00010012 |
| Display: | SERVICE CALL 00010012: CAP HOME POSITION ERROR |
| Description: | CR overload (high sensitivity) error PWM has been being output for a certain period of time. This can be made when load on the CR Motor is slightly increased. |
| Remedy: | 1. Check the load on the CR Motor. • Running load of CR Motor (check by manual operation) • Measure the resistance value of the PF Motor. If the CR Motor is found in short mode, replace the C593 MAIN Board at the same time. • Damage to or wear in the CR Driven Pulley • Damaged or worn bearing of the Carriage Unit • Flaws in the CR Rail caused by roller running • Tension of the CR timing belt 2. Replace the Motor Assy., CR 3. Replace the C593 MAIN Board |
| Error code: | 00010013 |
| Display: | SERVICE CALL 00010013: SUPPLY SYSTEM (INK PUMP) HOME POSITION ERROR |
| Description: | PR overload (high sensitivity) error PWM has been being output for a certain period of time. This can be made when load on the PF Motor is slightly increased. |
| Remedy: | 1. Check the load on the PF Motor. • Measure the resistance value of the PF Motor. If the PF Motor is found in short mode, replace the C593 MAIN Board at the same time. • Running load of PF Motor (check by manual operation) • Rotation load of PF Motor 2. Replace the Motor Assy., PF 3. Replace the C593 MAIN Board |
| Error code: | 00010014 |
| Display: | SERVICE CALL 00010014: PRESSURE DEFECTIVE ERROR |
| Description: | Failure of pressurizing The printer causes this error and stops operation if it detects an abnormal condition of the Pressure Sensor (air leak from the pressurizing mechanism) during the power-on initialization operation or while performing ink supply operation. |
| Causes: | • Pressure Motor failure • The connector of the Pressure Motor, Regulator Solenoid or Pressure Sensor is disconnected. • The harness of the Pressure Motor, Regulator Solenoid or Pressure Sensor is broken. • Regulator Solenoid failure (does not become ON) • Pressure Sensor failure • The Pressure Tube is disconnected. • The fuse for the Solenoid or the motor driver is blown. (on the Main Board) |
| Remedy: | 1. Reconnect the connectors of the Pressure Motor, Regulator Solenoid or Pressure Sensor securely. 2. Connect the Pressure Tube. 3. Replace the PUMP ASSY., SUPPLY . 4. Replace the BOARD ASSY., MAIN . |
| Error code: | 00,010,015 |
| Display: | SERVICE CALL 00,010,015: INK SURFACE SENSOR (K) OVERFLOW |
| Description: | Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition). |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger |
| Error code: | 00,010,016 |
| Display: | SERVICE CALL 00,010,016: INK SURFACE SENSOR (C) OVERFLOW |
| Description: | Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition). |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger |
| Error code: | 00,010,017 |
| Display: | SERVICE CALL 00,010,017: INK SURFACE SENSOR (M) OVERFLOW |
| Description: | Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition). |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger |
| Error code: | 00,010,018 |
| Display: | SERVICE CALL 00,010,018: INK SURFACE SENSOR (LC) OVERFLOW |
| Description: | Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition). |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger |
| Error code: | 00,010,019 |
| Display: | SERVICE CALL 00,010,019: INK SURFACE SENSOR (LM) OVERFLOW |
| Description: | Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition). |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger |
| Error code: | 0001001A |
| Display: | OVERFLOW SERVICE CALL 0001001A: INK SURFACE SENSOR (Y) OVERFLOW |
| Description: | Surface of a liquid sensor defective or I/C valve solenoid defective it is (on condition). |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchanger |
| Error code: | 0001001B |
| Display: | SERVICE CALL 0001001B: HEAD DRIVER (TG) TEMPERATURE ERROR |
| Description: | Head driver (TG) temperature error The printer causes this error and stops operation if it detects an abnormal internal temperature of the printhead by the thermistor in the head while performing printing operation without firing ink from the nozzles. |
| Causes: | • The printhead internal temperature rises because of a printing operation without firing ink. • A breakdown of the printhead • Poor contact, short or disconnection of the tape electric wires • Main Board failure. (A/D of the CPU is damaged) |
| Remedy: | 1. Check if the printer can recover from the error by turning it OFF and back ON. 2. Replace the PRINT HEAD . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001001C |
| Display: | SERVICE CALL 0001001C: SUCTION FAN HOME POSITION ERROR |
| Description: | Starting point detection error or shutter starting point sensor defective o treatment by shutter motor step-out. |
| Remedy: | • Adsorption fan shutter motor exchange • C362DRV board exchange • Shutter starting point sensor exchange |
| Error code: | 0001001D |
| Display: | SERVICE CALL 0001001D: CR SERVO PARAMETER ERROR |
| Description: | CR servo parameter error The printer causes this error and stops operation when it detects that a voltage beyond the prescribed range is output to the CR Motor. |
| Remedy: | 1. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 2. Execute the CR Timing Belt Tension Adjustment . 3. Replace the CR Encoder Sensor . 4. Replace the CR MOTOR ASSY. . 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001001E |
| Display: | SERVICE CALL 0001001E: PF SERVO PARAMETER ERROR |
| Description: | PF servo parameter error The printer causes this error and stops operation when it detects that a voltage beyond the prescribed range is output to the PF Motor. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Execute the PF Timing Belt Tension Adjustment . 3. Replace the PF Encoder Sensor . 4. Replace the PF MOTOR ASSY. . 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010020 |
| Display: | SERVICE CALL 00010020: CSIC READ INFORMATION ERROR |
| Description: | CSIC reading/writing error The printer causes this error and stops operation if it cannot load the information from the CSIC or write new information on the CSIC while running a power-ON/ OFF sequence or opening/closing the I/C Cover, or after finishing to print one page. |
| Remedy: | 1. Reconnect the CSIC FFC. 2. The memory chip on the ink cartridge is defective. (replace the ink cartridge) 3. Poor contact with the memory chip. • Replace the HOLDER ASSY., IC, RIGHT . • Replace the HOLDER ASSY., IC, LEFT . 4. Replace the BOARD ASSY., SUB; B ., Replace the BOARD ASSY., SUB; C . 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010021 |
| Display: | SERVICE CALL 00010021: STARTER CARTRIDGE ERROR |
| Description: | When it is neutral ink seed I led it. The CSIC information of liquid crystal ink cartridge is not correct. |
| Remedy: | • Ink cartridge is installed / exchange |
| Error code: | 00010022 |
| Display: | SERVICE CALL 00010022: INK TYPE ERROR |
| Description: | Ink type error (setting on printer body side) "Ink type: neutral" is set even though an ink type other than dye/pigment or "CSIC detection: OFF" has been set. |
| Remedy: | 1. Install the correct Ink Cartridge. 2. Raise the Ink Lever and set the Ink type (NPD) by SERVICE CONFIG of Maintenance Mode 2 . NOTE: If setting is performed with the Ink Lever in the set position, initialization will start and the service request error will occur again. |
| Error code: | 00020000 |
| Display: | SERVICE CALL:00020000 (NVRAM ERROR) |
| Description: | NVRAM error The printer causes this error and stops operation when it detects that parameters stored on the NVRAM are corrupted. |
| Causes: | NVRAM erasing or writing error (every 2-byte is checked) |
| Remedy: | Replace the BOARD ASSY., MAIN . |
| Error code: | 00020001 |
| Display: | SERVICE CALL: 00020001 (INTERNALSUM ERROR) |
| Description: | Internal RAM check error |
| Remedy: | • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. |
| Error code: | 00020002 |
| Display: | SERVICE CALL: 00020002 (SDRAM ERROR) |
| Description: | SDRAM error The printer causes this error and stops operation when it detects a bit error by the SDRAM memory check performed during the power-on sequence. |
| Causes: | • SDRAM reading/writing error • SDRAM failure • The address/data bus on the Main Board is broken or its contact is poor. |
| Remedy: | Replace the BOARD ASSY., MAIN . |
| Error code: | 00020003 |
| Display: | SERVICE CALL:00020003 (FLASH MEMORY SUM ERROR) |
| Description: | Boot program sum error The printer causes this error and stops operation when it detects that the boot program of the firmware is corrupted. This error occurs only when turning the power ON. |
| Causes: | • Failed to install the program. • Flash ROM failure • SDRAM failure • The address/data bus on the Main Board is broken or its contact is poor. |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 00020004 |
| Display: | SERVICE CALL 00020004: ASIC INJUSTICE VERSION ERROR |
| Description: | The ASIC version on the C362DRV board is not correct. |
| Remedy: | • C362DRV board exchange |
| Error code: | 00020005 |
| Display: | SERVICE CALL 00020005: FIRMWARE ASIC MISMATCHING |
| Description: | ASIC and firmware on the C362DRV board are not corresponding. |
| Remedy: | • Exchange the C362DRV board, whether or not n correct firmware is installed. |
| Error code: | 00020006 |
| Display: | SERVICE CALL 00020006: FIRMWARE BSIC MISMATCHING |
| Description: | ASIC and firmware on the C362DRV board are not corresponding. |
| Remedy: | • Exchange the C362DRV board, whether or not n correct firmware is installed. |
| Error code: | 0002000B |
| Display: | SERVICE CALL 0002000B: MEMORY INSUFFICIENT ERROR |
| Description: | The internal memory is insufficient. This error occurs when the cache area is judged as insufficient. The cache insufficient condition is likely to be caused by using the work area of the memory with unmatched interface mode settings or invalid commands. The printer stops operation when the error occurs. |
| Causes: | Malfunction of the program |
| Remedy: | 1. Check the interface mode setting 2. Installing Firmware 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 0002000C |
| Display: | SERVICE CALL 0002000C: REVIEW ERROR |
| Description: | Review error |
| Error code: | 00030015 |
| Display: | SERVICE CALL 00030015: INK SUPPLY DEFECTIVE (K) |
| Description: | Even if Isupply it ink the surface of a liquid sensor does not become full. It does not become defective (on I/C valve solenoid) or the surface of a liquid sensor defective |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchange |
| Error code: | 00030016 |
| Display: | SERVICE CALL 00030016: INK SUPPLY DEFECTIVE (C) |
| Description: | Even if Isupply it ink the surface of a liquid sensor does not become full. It does not become defective (on I/C valve solenoid) or the surface of a liquid sensor defective |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchange |
| Error code: | 00030017 |
| Display: | SERVICE CALL 00030017: INK SUPPLY DEFECTIVE (M) |
| Description: | Even if Isupply it ink the surface of a liquid sensor does not become full. It does not become defective (on I/C valve solenoid) or the surface of a liquid sensor defective |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchange |
| Error code: | 00030018 |
| Display: | SERVICE CALL 00030018: INK SUPPLY DEFECTIVE (LC) |
| Description: | Even if Isupply it ink the surface of a liquid sensor does not become full. It does not become defective (on I/C valve solenoid) or the surface of a liquid sensor defective |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchange |
| Error code: | 00030019 |
| Display: | SERVICE CALL 00030019: INK SUPPLY DEFECTIVE (LM) |
| Description: | Even if Isupply it ink the surface of a liquid sensor does not become full. It does not become defective (on I/C valve solenoid) or the surface of a liquid sensor defective |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchange |
| Error code: | 0003001A |
| Display: | SERVICE CALL 0003001A: INK SUPPLY DEFECTIVE (Y) |
| Description: | Even if Isupply it ink the surface of a liquid sensor does not become full. It does not become defective (on I/C valve solenoid) or the surface of a liquid sensor defective |
| Remedy: | • I/C valve solenoid exchange • C362DRV board exchange • Surface of a liquid sensor exchange |
| Error code: | 0003001B |
| Display: | SERVICE CALL 0003001B:GAP ADJUSTMENT RANGE ERROR |
| Description: | It is the adjustment value that is not able to adjust it to a hard target. |
| Remedy: | • Gap (Bi-D, Uni-D) adjustment is done over again. |
| Error code: | 0003XXXX |
| Display: | SERVICE CALL 0003XXXX: THE PROGRAM ERROR |
| Description: | The error (the program error) that is not anticipating it. |
| Remedy: | • Program retouch |
| Error code: | 0100 |
| Display: | MAINTENANCE CALL 0100 |
| Description: | Backup memory device error |
| Causes: | Defective flash memory. Defective main PWB. |
| Remedy: | EEPROM (main PWB) 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Check that the EEPROM on the main circuit PWB is peroperly installed on the main circuit PWB and, if not, re-install it. 3. Replace the main PWB |
| Error code: | 0101 |
| Display: | MAINTENANCE CALL 0101 |
| Description: | Limit Position Initialize in the Service Mode has not been done. |
| Causes: | Limit Position Initialize has not been done. Limit Position Initialize is ended before it is completed. |
| Remedy: | Complete Limit Position Initialize correctly. |
| Error code: | 0102 |
| Display: | MAINTENANCE CALL 0102 |
| Description: | Even though the machine carries out the regular movement, the output of Head Lock Sensor does not reach the expected value. |
| Causes: | Head Lock Sensor does not work correctly or is broken. |
| Remedy: | Head Lock Sensor replacement Check the mechanical backlash or loose with the scan axis related parts. |
| Error code: | 0103 |
| Display: | MAINTENANCE CALL 0103 |
| Description: | Even though the machine carries out the regular movement, the output of Limit Sensor does not reach the expected value. |
| Causes: | Limit Sensor does not work correctly or is broken. |
| Remedy: | Limit Sensor replacement Check the mechanical backlash or loose with the scan axis related parts. |
| Error code: | 100000E0 |
| Display: | SERVICE CALL 100000E0 : CPU ADDRESS ERROR |
| Description: | CPU address error (misalignment of loading) |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 10000100 |
| Display: | SERVICE CALL 10000100 : CPU ADDRESS ERROR |
| Description: | CPU address error (misalignment of storing) |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 10000180 |
| Display: | SERVICE CALL 10000180 : CPU RESERVATION INSTRUCTION CODE EXCEPTION ERROR |
| Description: | CPU reserved command code exception error |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 100001A0 |
| Display: | SERVICE CALL 100001A0 : CPU SLOT UNFAIR COMMAND EXCEPTION ERROR |
| Description: | CPU slot undefined command exception error |
| Causes: | • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 100005C0 |
| Display: | SERVICE CALL 100005C0 : CPU DMA ADDRESS ERROR |
| Description: | CPU DMA address error |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 10000XXX |
| Display: | SERVICE CALL 10000XXX : CPU ERROR |
| Description: | CPU error |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | D0090000 |
| Display: | SERVICE CALL D0090000: CSIC READ-WRITE ERROR |
| Description: | It failed to the read-write of CSIC (the ink cartridge.) |
| Remedy: | • Ink cartridge exchange • C362DRV board exchangeidge. |
| Error code: | D0110013 |
| Display: | SERVICE CALL D0110013: MODULAR COMMUNICATION ERROR |
| Description: | Communication error between C362MAIN/C362DRV and also P3 board |
| Remedy: | • Connector joint confirmation between the n board • Gradually exchange the n board |
| Error code: | D0XXXXXX |
| Display: | SERVICE CALL D0XXXXXX: THE PROGRAM ERROR |
| Description: | The error (the program error) that is not anticipating it. |
| Remedy: | • Program retouch |
Парткод
Название
EPSON T499 Картридж черный
EPSON T500 Картридж желтый
EPSON T501 Картридж пурпурный
EPSON T502 Картридж голубой
EPSON T503 Картридж светло-пурпурный
EPSON T504 Картридж светло-голубой
EPSON T511 Картридж черный
EPSON T512 Картридж желтый
EPSON T513 Картридж пурпурный
EPSON T514 Картридж голубой
EPSON T515 Картридж светло-пурпурный
EPSON T516 Картридж светло-голубой
EPSON T5491 Картридж фото-черный UltraChrome 500 мл.
EPSON T5492 Картридж голубой UltraChrome 500 мл.
EPSON T5493 Картридж пурпурный UltraChrome 500 мл.
EPSON T5494 Картридж желтый UltraChrome 500 мл.
EPSON T5495 Картридж светло-голубой UltraChrome 500 мл.
EPSON T5496 Картридж светло-пурпурный UltraChrome 500 мл.
EPSON T5498 Картридж матовый черный UltraChrome 500 мл.
