Epson Stylus Pro 4910
Рейтинг
Модули
MECH-022
MECH-033
MECH-042
CASE-011
ELEC-012
MECH-012
MECH-051
Детали CASE-011
| Деталь: | FRAME,PAPER GUIDE,UPPER,UNIT ESL,ASP |
| Парткод: | 1541300 |
| Деталь: | FRAME ASSY.,APG,UNIT ESL,ASP |
| Парткод: | 1541323 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CARRIAGE,UNIT ESL,ASP |
| Парткод: | 1541324 |
| Деталь: | Harness Motor CR Assy ASP |
| Парткод: | 1541326 |
| Деталь: | FRAME,GUIDE,CUTTER,UNIT ESL,ASP |
| Парткод: | 1541301 |
| Деталь: | MOTOR ASSY.,ASF |
| Парткод: | 2130109 |
| Деталь: | HARNESS,MOTOR,CUTTER |
| Парткод: | 2131342 |
| Деталь: | HARNESS,DETECTOR,CUTTER |
| Парткод: | 2131343 |
| Деталь: | DECOMPRESSION,PUMP,UNIT,ASP |
| Парткод: | 1541327 |
| Деталь: | HOLDER,IC,LEFT,UNIT,ASP |
| Парткод: | 1541302 |
| Деталь: | HOLDER,IC,RIGHT,UNIT,ASP |
| Парткод: | 1541303 |
| Деталь: | PUMP,UNIT,ASP |
| Парткод: | 1541304 |
| Деталь: | CAP,HEAD,LARGE ASSY ASP |
| Парткод: | 1541330 |
| Деталь: | SELECTOR,UNIT,ASP |
| Парткод: | 1541331 |
| Деталь: | TUBE ASSY ASP |
| Парткод: | 1541332 |
| Деталь: | PANEL UNIT ESL,ASP |
| Парткод: | 1541306 |
| Деталь: | LCD MODULE |
| Парткод: | 2132460 |
| Деталь: | HARNESS |
| Парткод: | 2129500 |
| Деталь: | BOARD ASSY.,PANEL |
| Парткод: | 2133874 |
| Деталь: | HOUSING,PANEL,ASSY,ASP |
| Парткод: | 1545207 |
| Деталь: | HOLDER ROLLER,RETARD ASSY.,B ASP |
| Парткод: | 1555406 |
| Деталь: | PAPER GUIDE,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541313 |
| Деталь: | PAPER GUIDE,MIDDLE UNIT ESL,ASP |
| Парткод: | 1541314 |
| Деталь: | PAPER SUPPORT,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541316 |
| Деталь: | SHAFT,LEVER,PICK UP ASSY ASP |
| Парткод: | 1541335 |
| Деталь: | ROLL UNIT ESL,ASP |
| Парткод: | 1541317 |
| Деталь: | SCALE,PF,ASP |
| Парткод: | 1541336 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,ENCODER,PF |
| Парткод: | 2130129 |
| Деталь: | HARNESS,MOTOR,APG |
| Парткод: | 2130383 |
| Деталь: | HARNESS,SCALE |
| Парткод: | 2130369 |
| Деталь: | FFC,MAINTENANCE TANK |
| Парткод: | 2130401 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | HARNESS,DETECTOR,PAPER GUIDE,MIDDLE |
| Парткод: | 2130023 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2130088 |
| Деталь: | CABLE,DETECTOR,COVER,FRONT |
| Парткод: | 2130095 |
| Деталь: | HARNESS,RELAY, SUB B |
| Парткод: | 2130096 |
| Деталь: | HARNESS,RELAY,SUB B |
| Парткод: | 2130097 |
| Деталь: | HARNESS,RELAY, SUB C |
| Парткод: | 2130098 |
| Деталь: | CABLE,DETECTOR,COVER,PRINTER |
| Парткод: | 2130099 |
| Деталь: | CABLE,RELAY, SPM |
| Парткод: | 2130100 |
| Деталь: | HARNESS,MOTOR,ASF |
| Парткод: | 2130113 |
| Деталь: | HARNESS,MOTOR,ASF,SUB |
| Парткод: | 2130114 |
| Деталь: | MOTOR ASSY.,PF |
| Парткод: | 2130121 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2130374 |
| Деталь: | FERRITE CORE,28R0756-200 |
| Парткод: | 2130992 |
| Деталь: | COVER,SW |
| Парткод: | 2130086 |
| Деталь: | PRINT HEAD |
| Парткод: | F198000 |
| Деталь: | HARNESS,MOTOR,EDGE GUIDE |
| Парткод: | 2130118 |
| Деталь: | HARNESS,DETECTOR,EDGE GUIDE |
| Парткод: | 2130106 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130127 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130128 |
| Деталь: | HARNESS,PE,PAPER GUIDE,REAR |
| Парткод: | 2130022 |
| Деталь: | BOARD ASSY.,ENCODER,SC |
| Парткод: | 2121499 |
| Деталь: | MOTOR ASSY.,RELEASE,DRIVEN |
| Парткод: | 2130122 |
| Деталь: | HARNESS,DETECTOR,RELEASE,DRIVEN |
| Парткод: | 2130124 |
| Деталь: | HARNESS,ENCODER,RELEASE,DRIVEN |
| Парткод: | 2130130 |
| Деталь: | DETECTOR,PAPER END |
| Парткод: | 1111835 |
| Деталь: | SHAFT,MOUNT PLATE,CR-3C |
| Парткод: | 1296960 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524421 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524422 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524423 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524424 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524453 |
| Деталь: | LEAF SENSOR |
| Парткод: | 2090717 |
| Деталь: | HARNESS,DETECTOR,PICK UP |
| Парткод: | 2130115 |
| Деталь: | HARNESS,DETECTOR,RETARD |
| Парткод: | 2130116 |
| Деталь: | HARNESS,DETECTOR, ROLLER, ASSIST |
| Парткод: | 2130117 |
| Деталь: | HARNESS,DETECTOR,PE,CASSETTE |
| Парткод: | 2130108 |
| Деталь: | HARNESS,DETECTOR,CASSETTE |
| Парткод: | 2130107 |
| Деталь: | CABLE,DETECTOR,ROLL |
| Парткод: | 2130089 |
| Деталь: | CABLE,DETECTOR,INK EJECT |
| Парткод: | 2130090 |
| Деталь: | POROUS PAD,TANK,INK EJECT, SUPPORT |
| Парткод: | 1524428 |
| Деталь: | MIN SIDE LOCK091Y |
| Парткод: | 1043027 |
| Деталь: | HARNESS,TANK,INK EJECT |
| Парткод: | 2130091 |
| Деталь: | CONNECTOR,CSIC |
| Парткод: | 2090566 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1524703 |
| Деталь: | SEAL RUBBERJOINT |
| Парткод: | 1525754 |
| Деталь: | SEAL RUBBER,JOINT |
| Парткод: | 1525755 |
| Деталь: | SCALE,CR |
| Парткод: | 1525877 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1525855 |
| Деталь: | HOLDER,SCROLLER,RIGHT UNIT ESL,ASP |
| Парткод: | 1542715 |
| Деталь: | HOLDER,WIPER & WIPER CLEANER ASSY ASP |
| Парткод: | 1545203 |
| Деталь: | BUSHING SET.,ASP |
| Парткод: | 1555405 |
| Деталь: | FRAME,PAPER GUIDE,UPPER,UNIT ESL,ASP |
| Парткод: | 1541300 |
| Деталь: | FRAME ASSY.,APG,UNIT ESL,ASP |
| Парткод: | 1541323 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CARRIAGE,UNIT ESL,ASP |
| Парткод: | 1541324 |
| Деталь: | Harness Motor CR Assy ASP |
| Парткод: | 1541326 |
| Деталь: | FRAME,GUIDE,CUTTER,UNIT ESL,ASP |
| Парткод: | 1541301 |
| Деталь: | MOTOR ASSY.,ASF |
| Парткод: | 2130109 |
| Деталь: | HARNESS,MOTOR,CUTTER |
| Парткод: | 2131342 |
| Деталь: | HARNESS,DETECTOR,CUTTER |
| Парткод: | 2131343 |
| Деталь: | DECOMPRESSION,PUMP,UNIT,ASP |
| Парткод: | 1541327 |
| Деталь: | HOLDER,IC,LEFT,UNIT,ASP |
| Парткод: | 1541302 |
| Деталь: | HOLDER,IC,RIGHT,UNIT,ASP |
| Парткод: | 1541303 |
| Деталь: | PUMP,UNIT,ASP |
| Парткод: | 1541304 |
| Деталь: | CAP,HEAD,LARGE ASSY ASP |
| Парткод: | 1541330 |
| Деталь: | SELECTOR,UNIT,ASP |
| Парткод: | 1541331 |
| Деталь: | TUBE ASSY ASP |
| Парткод: | 1541332 |
| Деталь: | PANEL UNIT ESL,ASP |
| Парткод: | 1541306 |
| Деталь: | LCD MODULE |
| Парткод: | 2132460 |
| Деталь: | HARNESS |
| Парткод: | 2129500 |
| Деталь: | BOARD ASSY.,PANEL |
| Парткод: | 2133874 |
| Деталь: | HOUSING,PANEL,ASSY,ASP |
| Парткод: | 1545207 |
| Деталь: | HOLDER ROLLER,RETARD ASSY.,B ASP |
| Парткод: | 1555406 |
| Деталь: | PAPER GUIDE,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541313 |
| Деталь: | PAPER GUIDE,MIDDLE UNIT ESL,ASP |
| Парткод: | 1541314 |
| Деталь: | PAPER SUPPORT,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541316 |
| Деталь: | SHAFT,LEVER,PICK UP ASSY ASP |
| Парткод: | 1541335 |
| Деталь: | ROLL UNIT ESL,ASP |
| Парткод: | 1541317 |
| Деталь: | SCALE,PF,ASP |
| Парткод: | 1541336 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,ENCODER,PF |
| Парткод: | 2130129 |
| Деталь: | HARNESS,MOTOR,APG |
| Парткод: | 2130383 |
| Деталь: | HARNESS,SCALE |
| Парткод: | 2130369 |
| Деталь: | FFC,MAINTENANCE TANK |
| Парткод: | 2130401 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | HARNESS,DETECTOR,PAPER GUIDE,MIDDLE |
| Парткод: | 2130023 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2130088 |
| Деталь: | CABLE,DETECTOR,COVER,FRONT |
| Парткод: | 2130095 |
| Деталь: | HARNESS,RELAY, SUB B |
| Парткод: | 2130096 |
| Деталь: | HARNESS,RELAY,SUB B |
| Парткод: | 2130097 |
| Деталь: | HARNESS,RELAY, SUB C |
| Парткод: | 2130098 |
| Деталь: | CABLE,DETECTOR,COVER,PRINTER |
| Парткод: | 2130099 |
| Деталь: | CABLE,RELAY, SPM |
| Парткод: | 2130100 |
| Деталь: | HARNESS,MOTOR,ASF |
| Парткод: | 2130113 |
| Деталь: | HARNESS,MOTOR,ASF,SUB |
| Парткод: | 2130114 |
| Деталь: | MOTOR ASSY.,PF |
| Парткод: | 2130121 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2130374 |
| Деталь: | FERRITE CORE,28R0756-200 |
| Парткод: | 2130992 |
| Деталь: | COVER,SW |
| Парткод: | 2130086 |
| Деталь: | PRINT HEAD |
| Парткод: | F198000 |
| Деталь: | HARNESS,MOTOR,EDGE GUIDE |
| Парткод: | 2130118 |
| Деталь: | HARNESS,DETECTOR,EDGE GUIDE |
| Парткод: | 2130106 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130127 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130128 |
| Деталь: | HARNESS,PE,PAPER GUIDE,REAR |
| Парткод: | 2130022 |
| Деталь: | BOARD ASSY.,ENCODER,SC |
| Парткод: | 2121499 |
| Деталь: | MOTOR ASSY.,RELEASE,DRIVEN |
| Парткод: | 2130122 |
| Деталь: | HARNESS,DETECTOR,RELEASE,DRIVEN |
| Парткод: | 2130124 |
| Деталь: | HARNESS,ENCODER,RELEASE,DRIVEN |
| Парткод: | 2130130 |
| Деталь: | DETECTOR,PAPER END |
| Парткод: | 1111835 |
| Деталь: | SHAFT,MOUNT PLATE,CR-3C |
| Парткод: | 1296960 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524421 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524422 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524423 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524424 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524453 |
| Деталь: | LEAF SENSOR |
| Парткод: | 2090717 |
| Деталь: | HARNESS,DETECTOR,PICK UP |
| Парткод: | 2130115 |
| Деталь: | HARNESS,DETECTOR,RETARD |
| Парткод: | 2130116 |
| Деталь: | HARNESS,DETECTOR, ROLLER, ASSIST |
| Парткод: | 2130117 |
| Деталь: | HARNESS,DETECTOR,PE,CASSETTE |
| Парткод: | 2130108 |
| Деталь: | HARNESS,DETECTOR,CASSETTE |
| Парткод: | 2130107 |
| Деталь: | CABLE,DETECTOR,ROLL |
| Парткод: | 2130089 |
| Деталь: | CABLE,DETECTOR,INK EJECT |
| Парткод: | 2130090 |
| Деталь: | POROUS PAD,TANK,INK EJECT, SUPPORT |
| Парткод: | 1524428 |
| Деталь: | MIN SIDE LOCK091Y |
| Парткод: | 1043027 |
| Деталь: | HARNESS,TANK,INK EJECT |
| Парткод: | 2130091 |
| Деталь: | CONNECTOR,CSIC |
| Парткод: | 2090566 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1524703 |
| Деталь: | SEAL RUBBERJOINT |
| Парткод: | 1525754 |
| Деталь: | SEAL RUBBER,JOINT |
| Парткод: | 1525755 |
| Деталь: | SCALE,CR |
| Парткод: | 1525877 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1525855 |
| Деталь: | HOLDER,SCROLLER,RIGHT UNIT ESL,ASP |
| Парткод: | 1542715 |
| Деталь: | HOLDER,WIPER & WIPER CLEANER ASSY ASP |
| Парткод: | 1545203 |
| Деталь: | BUSHING SET.,ASP |
| Парткод: | 1555405 |
| Деталь: | FRAME,PAPER GUIDE,UPPER,UNIT ESL,ASP |
| Парткод: | 1541300 |
| Деталь: | FRAME ASSY.,APG,UNIT ESL,ASP |
| Парткод: | 1541323 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CARRIAGE,UNIT ESL,ASP |
| Парткод: | 1541324 |
| Деталь: | Harness Motor CR Assy ASP |
| Парткод: | 1541326 |
| Деталь: | FRAME,GUIDE,CUTTER,UNIT ESL,ASP |
| Парткод: | 1541301 |
| Деталь: | MOTOR ASSY.,ASF |
| Парткод: | 2130109 |
| Деталь: | HARNESS,MOTOR,CUTTER |
| Парткод: | 2131342 |
| Деталь: | HARNESS,DETECTOR,CUTTER |
| Парткод: | 2131343 |
| Деталь: | DECOMPRESSION,PUMP,UNIT,ASP |
| Парткод: | 1541327 |
| Деталь: | HOLDER,IC,LEFT,UNIT,ASP |
| Парткод: | 1541302 |
| Деталь: | HOLDER,IC,RIGHT,UNIT,ASP |
| Парткод: | 1541303 |
| Деталь: | PUMP,UNIT,ASP |
| Парткод: | 1541304 |
| Деталь: | CAP,HEAD,LARGE ASSY ASP |
| Парткод: | 1541330 |
| Деталь: | SELECTOR,UNIT,ASP |
| Парткод: | 1541331 |
| Деталь: | TUBE ASSY ASP |
| Парткод: | 1541332 |
| Деталь: | PANEL UNIT ESL,ASP |
| Парткод: | 1541306 |
| Деталь: | LCD MODULE |
| Парткод: | 2132460 |
| Деталь: | HARNESS |
| Парткод: | 2129500 |
| Деталь: | BOARD ASSY.,PANEL |
| Парткод: | 2133874 |
| Деталь: | HOUSING,PANEL,ASSY,ASP |
| Парткод: | 1545207 |
| Деталь: | HOLDER ROLLER,RETARD ASSY.,B ASP |
| Парткод: | 1555406 |
| Деталь: | PAPER GUIDE,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541313 |
| Деталь: | PAPER GUIDE,MIDDLE UNIT ESL,ASP |
| Парткод: | 1541314 |
| Деталь: | PAPER SUPPORT,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541316 |
| Деталь: | SHAFT,LEVER,PICK UP ASSY ASP |
| Парткод: | 1541335 |
| Деталь: | ROLL UNIT ESL,ASP |
| Парткод: | 1541317 |
| Деталь: | SCALE,PF,ASP |
| Парткод: | 1541336 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,ENCODER,PF |
| Парткод: | 2130129 |
| Деталь: | HARNESS,MOTOR,APG |
| Парткод: | 2130383 |
| Деталь: | HARNESS,SCALE |
| Парткод: | 2130369 |
| Деталь: | FFC,MAINTENANCE TANK |
| Парткод: | 2130401 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | HARNESS,DETECTOR,PAPER GUIDE,MIDDLE |
| Парткод: | 2130023 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2130088 |
| Деталь: | CABLE,DETECTOR,COVER,FRONT |
| Парткод: | 2130095 |
| Деталь: | HARNESS,RELAY, SUB B |
| Парткод: | 2130096 |
| Деталь: | HARNESS,RELAY,SUB B |
| Парткод: | 2130097 |
| Деталь: | HARNESS,RELAY, SUB C |
| Парткод: | 2130098 |
| Деталь: | CABLE,DETECTOR,COVER,PRINTER |
| Парткод: | 2130099 |
| Деталь: | CABLE,RELAY, SPM |
| Парткод: | 2130100 |
| Деталь: | HARNESS,MOTOR,ASF |
| Парткод: | 2130113 |
| Деталь: | HARNESS,MOTOR,ASF,SUB |
| Парткод: | 2130114 |
| Деталь: | MOTOR ASSY.,PF |
| Парткод: | 2130121 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2130374 |
| Деталь: | FERRITE CORE,28R0756-200 |
| Парткод: | 2130992 |
| Деталь: | COVER,SW |
| Парткод: | 2130086 |
| Деталь: | PRINT HEAD |
| Парткод: | F198000 |
| Деталь: | HARNESS,MOTOR,EDGE GUIDE |
| Парткод: | 2130118 |
| Деталь: | HARNESS,DETECTOR,EDGE GUIDE |
| Парткод: | 2130106 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130127 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130128 |
| Деталь: | HARNESS,PE,PAPER GUIDE,REAR |
| Парткод: | 2130022 |
| Деталь: | BOARD ASSY.,ENCODER,SC |
| Парткод: | 2121499 |
| Деталь: | MOTOR ASSY.,RELEASE,DRIVEN |
| Парткод: | 2130122 |
| Деталь: | HARNESS,DETECTOR,RELEASE,DRIVEN |
| Парткод: | 2130124 |
| Деталь: | HARNESS,ENCODER,RELEASE,DRIVEN |
| Парткод: | 2130130 |
| Деталь: | DETECTOR,PAPER END |
| Парткод: | 1111835 |
| Деталь: | SHAFT,MOUNT PLATE,CR-3C |
| Парткод: | 1296960 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524421 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524422 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524423 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524424 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524453 |
| Деталь: | LEAF SENSOR |
| Парткод: | 2090717 |
| Деталь: | HARNESS,DETECTOR,PICK UP |
| Парткод: | 2130115 |
| Деталь: | HARNESS,DETECTOR,RETARD |
| Парткод: | 2130116 |
| Деталь: | HARNESS,DETECTOR, ROLLER, ASSIST |
| Парткод: | 2130117 |
| Деталь: | HARNESS,DETECTOR,PE,CASSETTE |
| Парткод: | 2130108 |
| Деталь: | HARNESS,DETECTOR,CASSETTE |
| Парткод: | 2130107 |
| Деталь: | CABLE,DETECTOR,ROLL |
| Парткод: | 2130089 |
| Деталь: | CABLE,DETECTOR,INK EJECT |
| Парткод: | 2130090 |
| Деталь: | POROUS PAD,TANK,INK EJECT, SUPPORT |
| Парткод: | 1524428 |
| Деталь: | MIN SIDE LOCK091Y |
| Парткод: | 1043027 |
| Деталь: | HARNESS,TANK,INK EJECT |
| Парткод: | 2130091 |
| Деталь: | CONNECTOR,CSIC |
| Парткод: | 2090566 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1524703 |
| Деталь: | SEAL RUBBERJOINT |
| Парткод: | 1525754 |
| Деталь: | SEAL RUBBER,JOINT |
| Парткод: | 1525755 |
| Деталь: | SCALE,CR |
| Парткод: | 1525877 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1525855 |
| Деталь: | HOLDER,SCROLLER,RIGHT UNIT ESL,ASP |
| Парткод: | 1542715 |
| Деталь: | HOLDER,WIPER & WIPER CLEANER ASSY ASP |
| Парткод: | 1545203 |
| Деталь: | BUSHING SET.,ASP |
| Парткод: | 1555405 |
| Деталь: | STACKER,UNIT ESL,ASP |
| Парткод: | 1541305 |
| Деталь: | COVER,PRINTER,UNIT ESL,ASP |
| Парткод: | 1541307 |
| Деталь: | HOUSING,SIDE,LEFT UNIT ESL,ASP |
| Парткод: | 1541308 |
| Деталь: | HOUSING,SIDE,RIGHT UNIT ESL,ASP |
| Парткод: | 1541309 |
| Деталь: | COVER,IC,RIGHT UNIT ESL,ASP |
| Парткод: | 1541310 |
| Деталь: | COVER,IC,LEFT UNIT ESL,ASP |
| Парткод: | 1541311 |
| Деталь: | TRAY,CASSETTE UNIT B.,ASP |
| Парткод: | 1549528 |
| Деталь: | COVER,MAINTENANCE |
| Парткод: | 1524510 |
| Деталь: | HOUSING,FRONT,UPPER |
| Парткод: | 1524514 |
| Деталь: | HOUSING,REAR,UPPER,ASSY,ASP |
| Парткод: | 1545205 |
| Деталь: | HOUSING,FRONT,MIDDLE |
| Парткод: | 1524520 |
| Деталь: | HOUSING,REAR,LOWER |
| Парткод: | 1524522 |
| Деталь: | HOUSING,FRONT,LOWER,ASSY,ASP |
| Парткод: | 1545206 |
| Деталь: | SHAFT,SCROLLER |
| Парткод: | 1527994 |
| Деталь: | CAP, SHAFT, SCROLLER, RIGHT |
| Парткод: | 1527996 |
| Деталь: | SHAFT,STOPPER,L |
| Парткод: | 1220015 |
| Деталь: | FLANGE,RIGHT |
| Парткод: | 1104330 |
| Деталь: | ADAPTER |
| Парткод: | 1104332 |
| Деталь: | SPACER,A2 |
| Парткод: | 1264198 |
| Деталь: | FLANGE,LEFT |
| Парткод: | 1412711 |
| Деталь: | COVER,FRONT,ASSY,ASP |
| Парткод: | 1545204 |
| Деталь: | GUIDE,IC,LEFT |
| Парткод: | 1524502 |
| Деталь: | GUIDE,IC,RIGHT |
| Парткод: | 1524508 |
| Деталь: | LABEL, SPINDLE |
| Парткод: | 1525382 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2130374 |
| Деталь: | FERRITE CORE,28R0756-200 |
| Парткод: | 2130992 |
| Деталь: | COVER,SW |
| Парткод: | 2130086 |
| Деталь: | PRINT HEAD |
| Парткод: | F198000 |
| Деталь: | HARNESS,MOTOR,EDGE GUIDE |
| Парткод: | 2130118 |
| Деталь: | HARNESS,DETECTOR,EDGE GUIDE |
| Парткод: | 2130106 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130127 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130128 |
| Деталь: | HARNESS,PE,PAPER GUIDE,REAR |
| Парткод: | 2130022 |
| Деталь: | BOARD ASSY.,ENCODER,SC |
| Парткод: | 2121499 |
| Деталь: | MOTOR ASSY.,RELEASE,DRIVEN |
| Парткод: | 2130122 |
| Деталь: | HARNESS,DETECTOR,RELEASE,DRIVEN |
| Парткод: | 2130124 |
| Деталь: | HARNESS,ENCODER,RELEASE,DRIVEN |
| Парткод: | 2130130 |
| Деталь: | DETECTOR,PAPER END |
| Парткод: | 1111835 |
| Деталь: | SHAFT,MOUNT PLATE,CR-3C |
| Парткод: | 1296960 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524421 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524422 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524423 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524424 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524453 |
| Деталь: | LEAF SENSOR |
| Парткод: | 2090717 |
| Деталь: | HARNESS,DETECTOR,PICK UP |
| Парткод: | 2130115 |
| Деталь: | HARNESS,DETECTOR,RETARD |
| Парткод: | 2130116 |
| Деталь: | HARNESS,DETECTOR, ROLLER, ASSIST |
| Парткод: | 2130117 |
| Деталь: | HARNESS,DETECTOR,PE,CASSETTE |
| Парткод: | 2130108 |
| Деталь: | HARNESS,DETECTOR,CASSETTE |
| Парткод: | 2130107 |
| Деталь: | CABLE,DETECTOR,ROLL |
| Парткод: | 2130089 |
| Деталь: | CABLE,DETECTOR,INK EJECT |
| Парткод: | 2130090 |
| Деталь: | POROUS PAD,TANK,INK EJECT, SUPPORT |
| Парткод: | 1524428 |
| Деталь: | MIN SIDE LOCK091Y |
| Парткод: | 1043027 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2132732 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2135483 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2133878 |
| Деталь: | FFC,AID |
| Парткод: | 2130400 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2133877 |
| Деталь: | HARNESS |
| Парткод: | 2130943 |
| Деталь: | HARNESS |
| Парткод: | 2130946 |
| Деталь: | HARNESS |
| Парткод: | 2130947 |
| Деталь: | HARNESS |
| Парткод: | 2130948 |
| Деталь: | HARNESS |
| Парткод: | 2130950 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2135430 |
| Деталь: | HARNESS |
| Парткод: | 2130999 |
| Деталь: | FAN |
| Парткод: | 2131616 |
| Деталь: | BOARD ASSY.,POWER SUPPLY |
| Парткод: | 2135429 |
| Деталь: | HARNESS |
| Парткод: | 2091965 |
| Деталь: | FAN ASSY.,ASP |
| Парткод: | 1507303 |
| Деталь: | HARNESS |
| Парткод: | 2130945 |
| Деталь: | HARNESS |
| Парткод: | 2130944 |
| Деталь: | INK CART.UNBOXED,PBK,PIGT |
| Парткод: | 1535652 |
| Деталь: | INK CART.UNBOXED,C,PIGT |
| Парткод: | 1535653 |
| Деталь: | INK CART.UNBOXED,VM,PIGT |
| Парткод: | 1535654 |
| Деталь: | INK CART.UNBOXED,Y,PIGT |
| Парткод: | 1535655 |
| Деталь: | INK CART.UNBOXED,LC,PIGT |
| Парткод: | 1535656 |
| Деталь: | INK CART.UNBOXED,VLM,PIGT |
| Парткод: | 1535657 |
| Деталь: | INK CART.UNBOXED,LBK,PIGT |
| Парткод: | 1535658 |
| Деталь: | INK CART.UNBOXED,MBK,PIGT |
| Парткод: | 1535659 |
| Деталь: | INK CART.UNBOXED,LLBK,PIGT |
| Парткод: | 1535660 |
| Деталь: | INK CART.UNBOXED,OR,PIGT |
| Парткод: | 1535661 |
| Деталь: | INK CART.UNBOXED,GRN,PIGT |
| Парткод: | 1535662 |
| Деталь: | GREASE G-26 (40GR)(B702600001) |
| Парткод: | 1080614 |
| Деталь: | PAPER THICKNESS POSITION TOOL |
| Парткод: | 1282355 |
| Деталь: | SONIC TENSION METER U507 |
| Парткод: | 1294120 |
| Деталь: | P-THICK SENSOR POSITION JIG |
| Парткод: | 1424364 |
| Деталь: | JETRAS JP-D300S |
| Парткод: | 1476228 |
| Деталь: | GREASE G-71(BLUE) |
| Парткод: | 1480655 |
| Деталь: | PG HEIGHT ADJUSTMENT JIG 1.75 |
| Парткод: | 1507277 |
| Деталь: | PG HEIGHT ADJUSTMENT JIG 1.65 |
| Парткод: | 1507506 |
| Деталь: | GREASE,G-84 |
| Парткод: | 1516265 |
| Деталь: | OIL,O-17 |
| Парткод: | 1521154 |
| Деталь: | CLEANING CARTRIDGE,200,J40C |
| Парткод: | 1537913 |
| Деталь: | PG HEIGHT ADJUSTMENT JIG 1.55 |
| Парткод: | 1543007 |
| Деталь: | FRAME,PAPER GUIDE,UPPER,UNIT ESL,ASP |
| Парткод: | 1541300 |
| Деталь: | FRAME ASSY.,APG,UNIT ESL,ASP |
| Парткод: | 1541323 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CARRIAGE,UNIT ESL,ASP |
| Парткод: | 1541324 |
| Деталь: | Harness Motor CR Assy ASP |
| Парткод: | 1541326 |
| Деталь: | FRAME,GUIDE,CUTTER,UNIT ESL,ASP |
| Парткод: | 1541301 |
| Деталь: | MOTOR ASSY.,ASF |
| Парткод: | 2130109 |
| Деталь: | HARNESS,MOTOR,CUTTER |
| Парткод: | 2131342 |
| Деталь: | HARNESS,DETECTOR,CUTTER |
| Парткод: | 2131343 |
| Деталь: | DECOMPRESSION,PUMP,UNIT,ASP |
| Парткод: | 1541327 |
| Деталь: | HOLDER,IC,LEFT,UNIT,ASP |
| Парткод: | 1541302 |
| Деталь: | HOLDER,IC,RIGHT,UNIT,ASP |
| Парткод: | 1541303 |
| Деталь: | PUMP,UNIT,ASP |
| Парткод: | 1541304 |
| Деталь: | CAP,HEAD,LARGE ASSY ASP |
| Парткод: | 1541330 |
| Деталь: | SELECTOR,UNIT,ASP |
| Парткод: | 1541331 |
| Деталь: | TUBE ASSY ASP |
| Парткод: | 1541332 |
| Деталь: | PANEL UNIT ESL,ASP |
| Парткод: | 1541306 |
| Деталь: | LCD MODULE |
| Парткод: | 2132460 |
| Деталь: | HARNESS |
| Парткод: | 2129500 |
| Деталь: | BOARD ASSY.,PANEL |
| Парткод: | 2133874 |
| Деталь: | HOUSING,PANEL,ASSY,ASP |
| Парткод: | 1545207 |
| Деталь: | HOLDER ROLLER,RETARD ASSY.,B ASP |
| Парткод: | 1555406 |
| Деталь: | PAPER GUIDE,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541313 |
| Деталь: | PAPER GUIDE,MIDDLE UNIT ESL,ASP |
| Парткод: | 1541314 |
| Деталь: | PAPER SUPPORT,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541316 |
| Деталь: | SHAFT,LEVER,PICK UP ASSY ASP |
| Парткод: | 1541335 |
| Деталь: | ROLL UNIT ESL,ASP |
| Парткод: | 1541317 |
| Деталь: | SCALE,PF,ASP |
| Парткод: | 1541336 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,ENCODER,PF |
| Парткод: | 2130129 |
| Деталь: | HARNESS,MOTOR,APG |
| Парткод: | 2130383 |
| Деталь: | HARNESS,SCALE |
| Парткод: | 2130369 |
| Деталь: | FFC,MAINTENANCE TANK |
| Парткод: | 2130401 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | HARNESS,DETECTOR,PAPER GUIDE,MIDDLE |
| Парткод: | 2130023 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2130088 |
| Деталь: | CABLE,DETECTOR,COVER,FRONT |
| Парткод: | 2130095 |
| Деталь: | HARNESS,RELAY, SUB B |
| Парткод: | 2130096 |
| Деталь: | HARNESS,RELAY,SUB B |
| Парткод: | 2130097 |
| Деталь: | HARNESS,RELAY, SUB C |
| Парткод: | 2130098 |
| Деталь: | CABLE,DETECTOR,COVER,PRINTER |
| Парткод: | 2130099 |
| Деталь: | CABLE,RELAY, SPM |
| Парткод: | 2130100 |
| Деталь: | HARNESS,MOTOR,ASF |
| Парткод: | 2130113 |
| Деталь: | HARNESS,MOTOR,ASF,SUB |
| Парткод: | 2130114 |
| Деталь: | MOTOR ASSY.,PF |
| Парткод: | 2130121 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2130374 |
| Деталь: | FERRITE CORE,28R0756-200 |
| Парткод: | 2130992 |
| Деталь: | COVER,SW |
| Парткод: | 2130086 |
| Деталь: | PRINT HEAD |
| Парткод: | F198000 |
| Деталь: | HARNESS,MOTOR,EDGE GUIDE |
| Парткод: | 2130118 |
| Деталь: | HARNESS,DETECTOR,EDGE GUIDE |
| Парткод: | 2130106 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130127 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130128 |
| Деталь: | HARNESS,PE,PAPER GUIDE,REAR |
| Парткод: | 2130022 |
| Деталь: | BOARD ASSY.,ENCODER,SC |
| Парткод: | 2121499 |
| Деталь: | MOTOR ASSY.,RELEASE,DRIVEN |
| Парткод: | 2130122 |
| Деталь: | HARNESS,DETECTOR,RELEASE,DRIVEN |
| Парткод: | 2130124 |
| Деталь: | HARNESS,ENCODER,RELEASE,DRIVEN |
| Парткод: | 2130130 |
| Деталь: | DETECTOR,PAPER END |
| Парткод: | 1111835 |
| Деталь: | SHAFT,MOUNT PLATE,CR-3C |
| Парткод: | 1296960 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524421 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524422 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524423 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524424 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524453 |
| Деталь: | LEAF SENSOR |
| Парткод: | 2090717 |
| Деталь: | HARNESS,DETECTOR,PICK UP |
| Парткод: | 2130115 |
| Деталь: | HARNESS,DETECTOR,RETARD |
| Парткод: | 2130116 |
| Деталь: | HARNESS,DETECTOR, ROLLER, ASSIST |
| Парткод: | 2130117 |
| Деталь: | HARNESS,DETECTOR,PE,CASSETTE |
| Парткод: | 2130108 |
| Деталь: | HARNESS,DETECTOR,CASSETTE |
| Парткод: | 2130107 |
| Деталь: | CABLE,DETECTOR,ROLL |
| Парткод: | 2130089 |
| Деталь: | CABLE,DETECTOR,INK EJECT |
| Парткод: | 2130090 |
| Деталь: | POROUS PAD,TANK,INK EJECT, SUPPORT |
| Парткод: | 1524428 |
| Деталь: | MIN SIDE LOCK091Y |
| Парткод: | 1043027 |
| Деталь: | HARNESS,TANK,INK EJECT |
| Парткод: | 2130091 |
| Деталь: | CONNECTOR,CSIC |
| Парткод: | 2090566 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1524703 |
| Деталь: | SEAL RUBBERJOINT |
| Парткод: | 1525754 |
| Деталь: | SEAL RUBBER,JOINT |
| Парткод: | 1525755 |
| Деталь: | SCALE,CR |
| Парткод: | 1525877 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1525855 |
| Деталь: | HOLDER,SCROLLER,RIGHT UNIT ESL,ASP |
| Парткод: | 1542715 |
| Деталь: | HOLDER,WIPER & WIPER CLEANER ASSY ASP |
| Парткод: | 1545203 |
| Деталь: | BUSHING SET.,ASP |
| Парткод: | 1555405 |
| Деталь: | FRAME,PAPER GUIDE,UPPER,UNIT ESL,ASP |
| Парткод: | 1541300 |
| Деталь: | FRAME ASSY.,APG,UNIT ESL,ASP |
| Парткод: | 1541323 |
| Деталь: | MOTOR ASSY.,ASF,SUB |
| Парткод: | 2130110 |
| Деталь: | CARRIAGE,UNIT ESL,ASP |
| Парткод: | 1541324 |
| Деталь: | Harness Motor CR Assy ASP |
| Парткод: | 1541326 |
| Деталь: | FRAME,GUIDE,CUTTER,UNIT ESL,ASP |
| Парткод: | 1541301 |
| Деталь: | MOTOR ASSY.,ASF |
| Парткод: | 2130109 |
| Деталь: | HARNESS,MOTOR,CUTTER |
| Парткод: | 2131342 |
| Деталь: | HARNESS,DETECTOR,CUTTER |
| Парткод: | 2131343 |
| Деталь: | DECOMPRESSION,PUMP,UNIT,ASP |
| Парткод: | 1541327 |
| Деталь: | HOLDER,IC,LEFT,UNIT,ASP |
| Парткод: | 1541302 |
| Деталь: | HOLDER,IC,RIGHT,UNIT,ASP |
| Парткод: | 1541303 |
| Деталь: | PUMP,UNIT,ASP |
| Парткод: | 1541304 |
| Деталь: | CAP,HEAD,LARGE ASSY ASP |
| Парткод: | 1541330 |
| Деталь: | SELECTOR,UNIT,ASP |
| Парткод: | 1541331 |
| Деталь: | TUBE ASSY ASP |
| Парткод: | 1541332 |
| Деталь: | PANEL UNIT ESL,ASP |
| Парткод: | 1541306 |
| Деталь: | LCD MODULE |
| Парткод: | 2132460 |
| Деталь: | HARNESS |
| Парткод: | 2129500 |
| Деталь: | BOARD ASSY.,PANEL |
| Парткод: | 2133874 |
| Деталь: | HOUSING,PANEL,ASSY,ASP |
| Парткод: | 1545207 |
| Деталь: | HOLDER ROLLER,RETARD ASSY.,B ASP |
| Парткод: | 1555406 |
| Деталь: | PAPER GUIDE,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541313 |
| Деталь: | PAPER GUIDE,MIDDLE UNIT ESL,ASP |
| Парткод: | 1541314 |
| Деталь: | PAPER SUPPORT,MANUAL,UNIT ESL,ASP |
| Парткод: | 1541316 |
| Деталь: | SHAFT,LEVER,PICK UP ASSY ASP |
| Парткод: | 1541335 |
| Деталь: | ROLL UNIT ESL,ASP |
| Парткод: | 1541317 |
| Деталь: | SCALE,PF,ASP |
| Парткод: | 1541336 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 2133325 |
| Деталь: | HARNESS,ENCODER,PF |
| Парткод: | 2130129 |
| Деталь: | HARNESS,MOTOR,APG |
| Парткод: | 2130383 |
| Деталь: | HARNESS,SCALE |
| Парткод: | 2130369 |
| Деталь: | FFC,MAINTENANCE TANK |
| Парткод: | 2130401 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | HARNESS,DETECTOR,PAPER GUIDE,MIDDLE |
| Парткод: | 2130023 |
| Деталь: | CABLE,RELAY,FAN |
| Парткод: | 2130088 |
| Деталь: | CABLE,DETECTOR,COVER,FRONT |
| Парткод: | 2130095 |
| Деталь: | HARNESS,RELAY, SUB B |
| Парткод: | 2130096 |
| Деталь: | HARNESS,RELAY,SUB B |
| Парткод: | 2130097 |
| Деталь: | HARNESS,RELAY, SUB C |
| Парткод: | 2130098 |
| Деталь: | CABLE,DETECTOR,COVER,PRINTER |
| Парткод: | 2130099 |
| Деталь: | CABLE,RELAY, SPM |
| Парткод: | 2130100 |
| Деталь: | HARNESS,MOTOR,ASF |
| Парткод: | 2130113 |
| Деталь: | HARNESS,MOTOR,ASF,SUB |
| Парткод: | 2130114 |
| Деталь: | MOTOR ASSY.,PF |
| Парткод: | 2130121 |
| Деталь: | MOTOR ASSY.,CR |
| Парткод: | 2130374 |
| Деталь: | FERRITE CORE,28R0756-200 |
| Парткод: | 2130992 |
| Деталь: | COVER,SW |
| Парткод: | 2130086 |
| Деталь: | PRINT HEAD |
| Парткод: | F198000 |
| Деталь: | HARNESS,MOTOR,EDGE GUIDE |
| Парткод: | 2130118 |
| Деталь: | HARNESS,DETECTOR,EDGE GUIDE |
| Парткод: | 2130106 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130127 |
| Деталь: | HARNESS,DETECTOR,PAPER THICKNESS |
| Парткод: | 2130128 |
| Деталь: | HARNESS,PE,PAPER GUIDE,REAR |
| Парткод: | 2130022 |
| Деталь: | BOARD ASSY.,ENCODER,SC |
| Парткод: | 2121499 |
| Деталь: | MOTOR ASSY.,RELEASE,DRIVEN |
| Парткод: | 2130122 |
| Деталь: | HARNESS,DETECTOR,RELEASE,DRIVEN |
| Парткод: | 2130124 |
| Деталь: | HARNESS,ENCODER,RELEASE,DRIVEN |
| Парткод: | 2130130 |
| Деталь: | DETECTOR,PAPER END |
| Парткод: | 1111835 |
| Деталь: | SHAFT,MOUNT PLATE,CR-3C |
| Парткод: | 1296960 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524421 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524422 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524423 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,LEFT |
| Парткод: | 1524424 |
| Деталь: | POROUS PAD, PAPER GUIDE,FRONT,RIGHT |
| Парткод: | 1524453 |
| Деталь: | LEAF SENSOR |
| Парткод: | 2090717 |
| Деталь: | HARNESS,DETECTOR,PICK UP |
| Парткод: | 2130115 |
| Деталь: | HARNESS,DETECTOR,RETARD |
| Парткод: | 2130116 |
| Деталь: | HARNESS,DETECTOR, ROLLER, ASSIST |
| Парткод: | 2130117 |
| Деталь: | HARNESS,DETECTOR,PE,CASSETTE |
| Парткод: | 2130108 |
| Деталь: | HARNESS,DETECTOR,CASSETTE |
| Парткод: | 2130107 |
| Деталь: | CABLE,DETECTOR,ROLL |
| Парткод: | 2130089 |
| Деталь: | CABLE,DETECTOR,INK EJECT |
| Парткод: | 2130090 |
| Деталь: | POROUS PAD,TANK,INK EJECT, SUPPORT |
| Парткод: | 1524428 |
| Деталь: | MIN SIDE LOCK091Y |
| Парткод: | 1043027 |
| Деталь: | HARNESS,TANK,INK EJECT |
| Парткод: | 2130091 |
| Деталь: | CONNECTOR,CSIC |
| Парткод: | 2090566 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1524703 |
| Деталь: | SEAL RUBBERJOINT |
| Парткод: | 1525754 |
| Деталь: | SEAL RUBBER,JOINT |
| Парткод: | 1525755 |
| Деталь: | SCALE,CR |
| Парткод: | 1525877 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1525855 |
| Деталь: | HOLDER,SCROLLER,RIGHT UNIT ESL,ASP |
| Парткод: | 1542715 |
| Деталь: | HOLDER,WIPER & WIPER CLEANER ASSY ASP |
| Парткод: | 1545203 |
| Деталь: | BUSHING SET.,ASP |
| Парткод: | 1555405 |
Коды ошибок
1101
1125
1138
113A
113B
113C
113D
113E
113F
122A
122B
122C
122D
122E
122F
131B
1412
141A
141B
141C
141D
141E
141F
1431
1432
1433
1494
1496
1497
149D
150C
151A
151B
151C
151D
151E
151F
1520
1521
1522
1523
152A
152B
152C
152D
152E
152F
1530
1531
153A
153B
153C
153D
153E
153F
1540
1541
1549
154A
154B
154C
154D
154E
154F
1551
155A
155B
155C
155D
155E
155F
1561
1562
156A
156B
156C
156D
156E
156F
1571
1572
1573
157A
157B
157C
157D
157E
157F
1581
1582
158A
158B
158C
158D
158E
158F
159A
159B
159C
159D
159E
159F
1801
1A23
1A26
1A37
1A38
1A39
1A41
1A50
1A51
1AB0
1AB1
1AB2
1AB3
1AB4
1AB5
1AB6
1AB7
1F80
1FB8
1FB9
1FBE
1FBF
1FC0
1FC1
1FC2
1FC3
1FC4
1FC5
1FC6
1FC7
1FC8
1FC9
1FCA
1FCB
2000
2002
2003
200A
200D
3000
Dxxy
Fxxx
Описание
| Error code: | 1101 |
| Display: | Replace part soon. |
| Description: | Data transmission did not finish within the specified time. |
| Causes: | An incompatible loop-back connector is connected to the parallel port, or the loop-back connector is not connected. Use the correct loop-back connector (P/#: G0219350) before the test. |
| Remedy: | Load paper. If the problem remains, then check the paper sensor. |
| Error code: | 1125 |
| Description: | CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set. • CR HP SENSOR failure • False detection of the home due to paper jam or any other obstacle • Misreading of CR SCALE • CR Lock is damaged. |
| Causes: | The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set. • CR HP SENSOR failure • False detection of the home due to paper jam or any other obstacle • Misreading of CR SCALE • CR Lock is damaged. |
| Remedy: | 1. Replace the CR HP SENSOR. 2. Re-install the CR ENCODER. If it is faulty, replace it. 3. Clean the CR SCALE using ethanol. 4. Replace the CR SCALE. 5. Replace the CR Lock . |
| Error code: | 1138 |
| Description: | Over current error Connection failure of the CR MOTOR or the CR ENCODER. • The number of occurrences of overcurrent to the CR MOTOR has reached a predetermined limit. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | • Connection failure of the CR MOTOR or the CR ENCODER. • The number of occurrences of overcurrent to the CR MOTOR has reached a predetermined limit. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. |
| Error code: | 113A |
| Description: | Overload error Overcurrent to the CR MOTOR was detected. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | Overcurrent to the CR MOTOR was detected. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Re-install the CR UNIT. 2. Replace the CR ENCODER. 3. Replace the CR MOTOR. |
| Error code: | 113B |
| Description: | Over speed error The CR MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CR ENCODER failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Causes: | The CR MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CR ENCODER failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the SUB BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 113C |
| Description: | Reversing error The number of occurrences of reversing the CR MOTOR has reached a predetermined limit. • The polarity of CR ENCODER cable is opposite. • The polarity of CR MOTOR cable is opposite. • Slipping of the teeth of CR TIMING BELT • CR ENCODER failure |
| Causes: | The number of occurrences of reversing the CR MOTOR has reached a predetermined limit. • The polarity of CR ENCODER cable is opposite. • The polarity of CR MOTOR cable is opposite. • Slipping of the teeth of CR TIMING BELT • CR ENCODER failure |
| Remedy: | 1. Adjust the tension of the CR TIMING BELT. 2. Replace the CR ENCODER. |
| Error code: | 113D |
| Description: | Driving time-out error Abnormally-long driving duration of the CR MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the CR MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 113E |
| Description: | Velocity deviation error The CR MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CR ENCODER failure • CR MOTOR failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Causes: | The CR MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CR ENCODER failure • CR MOTOR failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. 3. Replace the SUB BOARD. 4. Replace the MAIN BOARD. |
| Error code: | 113F |
| Description: | Lock error The CR MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | The CR MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. |
| Error code: | 122A |
| Description: | Overload error Overcurrent to the PF MOTOR was detected. • PF ENCODER cable is damaged. • PF MOTOR cable is damaged. • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Causes: | Overcurrent to the PF MOTOR was detected. • PF ENCODER cable is damaged. • PF MOTOR cable is damaged. • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the MAIN BOARD. |
| Error code: | 122B |
| Description: | Over speed error The PF MOTOR was driven at a speed faster than a predetermined one during deceleration. • PF irregular load • PF ENCODER failure • SUB-B BOARD is damaged. • PF MOTOR driver failure |
| Causes: | The PF MOTOR was driven at a speed faster than a predetermined one during deceleration. • PF irregular load • PF ENCODER failure • SUB-B BOARD is damaged. • PF MOTOR driver failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the SUB-B BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 122C |
| Description: | Reversing error The number of occurrences of reversing the PF MOTOR has reached a predetermined limit. • The polarity of PF ENCODER cable is opposite. • The polarity of PF MOTOR cable is opposite. • Slipping of the teeth of PF TIMING BELT • PF ENCODER failure |
| Causes: | The number of occurrences of reversing the PF MOTOR has reached a predetermined limit. • The polarity of PF ENCODER cable is opposite. • The polarity of PF MOTOR cable is opposite. • Slipping of the teeth of PF TIMING BELT • PF ENCODER failure |
| Remedy: | 1. Adjust the tension of the PF TIMING BELT. 2. Replace the PF ENCODER. |
| Error code: | 122D |
| Description: | Driving time-out error Abnormally-long driving duration of the PF MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the PF MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 122E |
| Description: | Velocity deviation error The PF MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PF ENCODER failure • PF MOTOR failure • SUB BOARD is damaged. • PF MOTOR driver failure |
| Causes: | The PF MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PF ENCODER failure • PF MOTOR failure • SUB BOARD is damaged. • PF MOTOR driver failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the PF MOTOR. 3. Replace the MAIN BOARD. |
| Error code: | 122F |
| Description: | Lock error The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • PF ENCODER cable disconnection • PF MOTOR cable disconnection • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Causes: | The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • PF ENCODER cable disconnection • PF MOTOR cable disconnection • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the PF MOTOR. |
| Error code: | 131B |
| Description: | Head driver (transmission gate) overheat error The temperature of the Head driver rises, and has reached a predetermined limit. |
| Causes: | The temperature of the Head driver rises, and has reached a predetermined limit. |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. |
| Error code: | 1412 |
| Description: | Pump life error The number of PUMP CAP UNIT operation has reached the specified limit. (The rotation of the pump motor has reached the specified limit.) |
| Causes: | The number of PUMP CAP UNIT operation has reached the specified limit. (The rotation of the pump motor has reached the specified limit.) |
| Remedy: | Replace the PUMP CAP UNIT , and reset its counter . |
| Error code: | 141A |
| Description: | Overload error Overcurrent to the pump motor was detected. • Pump motor encoder cable disconnection • Pump motor cable disconnection • Irregular load • Pump motor encoder failure • Pump motor failure |
| Causes: | Overcurrent to the pump motor was detected. • Pump motor encoder cable disconnection • Pump motor cable disconnection • Irregular load • Pump motor encoder failure • Pump motor failure |
| Remedy: | Replace the pump motor encoder and pump motor . |
| Error code: | 141B |
| Description: | Over speed error The pump motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Pump motor encoder failure • Pump motor driver failure |
| Causes: | The pump motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Pump motor encoder failure • Pump motor driver failure |
| Remedy: | 1. Replace the pump motor encoder . 2. Replace the MAIN BOARD. |
| Error code: | 141C |
| Description: | Reversing error The number of occurrences of reversing the pump motor has reached a predetermined limit. • The polarity of pump motor encoder cable is opposite. • The polarity of pump motor cable is opposite. |
| Causes: | The number of occurrences of reversing the pump motor has reached a predetermined limit. • The polarity of pump motor encoder cable is opposite. • The polarity of pump motor cable is opposite. |
| Remedy: | Replace the pump motor encoder . |
| Error code: | 141D |
| Description: | Driving time-out error Abnormally-long driving duration of the pump motor was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the pump motor was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. the |
| Error code: | 141E |
| Description: | Velocity deviation error The pump motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Pump motor encoder failure • Pump motor failure • Pump motor driver failure |
| Causes: | The pump motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Pump motor encoder failure • Pump motor failure • Pump motor driver failure |
| Remedy: | 1. Replace the pump motor encoder and pump motor . 2. Replace the MAIN BOARD. |
| Error code: | 141F |
| Description: | Lock error The pump motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump motor encoder failure • Pump motor failure |
| Causes: | The pump motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump motor encoder failure • Pump motor failure |
| Remedy: | Replace the pump motor encoder and pump motor . |
| Error code: | 1431 |
| Description: | Suction pump life error The Pump Cap Unit has reached the end of its service life. (The total number of revolutions of the Pump Motor has reached a predetermined limit) |
| Causes: | The number of operation counter of the Ink Selector has reached the specified life. (10,000 times) |
| Remedy: | Replace the Pump Cap Unit and reset the counter . |
| Error code: | 1432 |
| Description: | IC Holder life error The IC Holder has reached the end of its service life. (The total number of times that the holder was removed from the printer has reached a predetermined limit) |
| Causes: | Operations of the diaphragm in the Cartridge Holder exceeded the specified value. |
| Remedy: | Replace the IC Holder and reset the counter . |
| Error code: | 1433 |
| Description: | IC Holder 2 life error The IC Holder 2 has reached the end of its service life. (The total number of times the ink cartridge is removed from the printer has reached a predetermined limit) |
| Causes: | Positions of the ink system components do not match with the sensor condition. • Connection failure of the sensor • Sensor failure • IS Unit failure |
| Remedy: | Replace the IC Holder 2 and reset the counter . |
| Error code: | 1494 |
| Description: | Ink selector error Ink select operation failed. • Ink Selector Motor is broken. • Ink Selector Sensor is broken. • Ink Selector is overloaded. |
| Causes: | Ink select operation failed. • Ink Selector’s load is abnormal. • Ink Selector Sensor failure • Ink Selector Motor failure |
| Remedy: | Check the connection between the Ink Selector and the Main Board Assy. Replace the Ink Selector. Replace the Main Board Assy. |
| Error code: | 1496 |
| Description: | Ink selector sensor error detection Ink select operation failed. • Ink Selector Sensor is broken. |
| Causes: | Ink select operation failed. • Ink Selector Sensor failure |
| Remedy: | Check the connection between the Ink Selector and the Main Board Assy. Replace the Ink Selector. Replace the Main Board Assy. |
| Error code: | 1497 |
| Description: | Switching time-out error The ink selecting operation does not end even after the specified period of time has passed because the Ink Selector (the sensor or motor) is broken. |
| Causes: | 1. The Ink Selector Motor or the Ink Selector Sensor is not connected correctly. 2. Connection between the SUB Board and the Main Board has an abnormality. 3. Ink selection is not completed after the specified time has passed. • Ink Selector Motor failure • Ink Selector Sensor failure |
| Remedy: | Replace the Ink Selector. |
| Error code: | 149D |
| Description: | Driving time-out error Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Causes: | Detects that the driving period is irregularly long. • Ink Selector irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board Assy. |
| Error code: | 150C |
| Description: | PG position undetectable error When changing the PG, the PG SENSOR could not detect the PG position. |
| Causes: | When changing the PG, the PG SENSOR could not detect the PG position. |
| Remedy: | 1. Replace the PG SENSOR. 2. Replace the APG UNIT. 3. Remove any obstacles around the CR UNIT home position. The printer changes the PG with the CR UNIT being at its home position. |
| Error code: | 151A |
| Description: | Overload error Connection failure of the APG motor. • Overcurrent to the APG motor was detected. • APG motor cable is damaged. • Irregular load • APG encoder failure • APG motor failure |
| Causes: | • Connection failure of the APG motor. • Overcurrent to the APG motor was detected. • APG motor cable is damaged. • Irregular load • APG encoder failure • APG motor failure |
| Remedy: | Replace the APG UNIT. |
| Error code: | 151B |
| Description: | Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • APG encoder failure • APG motor driver failure |
| Causes: | The APG motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • APG encoder failure • APG motor driver failure |
| Remedy: | 1. Replace APG UNIT. 2. Replace the MAIN BOARD. |
| Error code: | 151C |
| Description: | Reversing error The number of occurrences of reversing the APG motor has reached a predetermined limit. • The polarity of APG motor cable is opposite. • APG motor failure |
| Causes: | The number of occurrences of reversing the APG motor has reached a predetermined limit. • The polarity of APG motor cable is opposite. • APG motor failure |
| Remedy: | Replace APG UNIT. |
| Error code: | 151D |
| Description: | Driving time-out error Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Causes: | Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 151E |
| Description: | Velocity deviation error The APG motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • APG encoder failure • APG motor failure • APG motor driver failure |
| Causes: | The APG motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • APG encoder failure • APG motor failure • APG motor driver failure |
| Remedy: | 1. Replace APG UNIT. 2. Replace the MAIN BOARD. |
| Error code: | 151F |
| Description: | Lock error Connection failure of the APG motor. • The APG motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • APG encoder failure • APG motor failure |
| Causes: | • Connection failure of the APG motor. • The APG motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • APG encoder failure • APG motor failure |
| Remedy: | Replace APG UNIT. |
| Error code: | 1520 |
| Description: | PF heater 1 high temperature error (paper feeder 2) A temperature higher than 75C/167F is detected. |
| Causes: | Defective connector cable or poor contact in the connector. Shorted PF thermistor 1. Defective PF fan motor 1. Defective PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF fan motor 1 and PF main PWB (YC111) Shorted PF thermistor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF fan motor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1521 |
| Description: | Roll Lock Sensor detection error |
| Causes: | 1. Connection failure of the Roll Lock Sensor. 2. Cannot detect Roll lock operation. • Roll Lock Sensor failure • Roll Feeding Motor failure |
| Remedy: | 1. Replace the Roll Lock Sensor. 2. Replace the Roll Feeding Motor Assy. |
| Error code: | 1522 |
| Description: | Roll Feeding Sensor detection error |
| Causes: | 1. Connection failure of the Roll Feeding Sensor. 2. Roll Feeding Sensor does not detect the end of paper. • Roll Feeding Sensor failure • Roll Feeding Motor failure |
| Remedy: | 1. Replace the Roll Feeding Sensor. 2. Replace the Roll Feeding Motor Assy. |
| Error code: | 1523 |
| Description: | Roll sensor error |
| Causes: | • Connection failure of the PE SENSOR (Roll Paper). • The lever of the PE SENSOR (Roll Paper) does not work correctly or dropped off. • PE SENSOR (Roll Paper) failure |
| Remedy: | TBD |
| Error code: | 152A |
| Description: | ROLL Overload error |
| Causes: | • Connection failure of the 1st PAPER FEED MOTOR. • Overcurrent to the1st PAPER FEED MOTOR was detected. • 1st PAPER FEED MOTOR cable is damaged. • Irregular load • 1st PAPER FEED MOTOR Encoder failure • 1st PAPER FEED MOTOR failure |
| Remedy: | Is there any problem such as damaged cable in the connections below? • 1st PAPER FEED MOTOR (1st PAPER FEED MOTOR Encoder) (CN15) Replace the 1st PAPER FEED MOTOR. |
| Error code: | 152B |
| Description: | ROLL Over speed error |
| Causes: | The 1st PAPER FEED MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • 1st PAPER FEED MOTOR Encoder failure • 1st PAPER FEED MOTOR failure |
| Remedy: | 1. Replace the 1st PAPER FEED MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 152C |
| Description: | ROLL Reversing error |
| Causes: | The number of occurrences of reversing the 1st PAPER FEED MOTOR has reached a predetermined limit. • The polarity of 1st PAPER FEED MOTOR encoder cable is opposite. • 1st PAPER FEED MOTOR failure |
| Remedy: | Is there any problem such as damaged cable in the connections below? • 1st PAPER FEED MOTOR (1st PAPER FEED MOTOR Encoder) (CN15) Replace the 1st PAPER FEED MOTOR. |
| Error code: | 152D |
| Description: | ROLL Driving time-out error |
| Causes: | Abnormally-long driving duration of the 1st PAPER FEED MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 152E |
| Description: | ROLL Velocity deviation error |
| Causes: | The1st PAPER FEED MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • 1st PAPER FEED MOTOR Encoder failure • 1st PAPER FEED MOTOR failure • 1st PAPER FEED MOTOR Driver failure |
| Remedy: | 1. Replace the 1st PAPER FEED MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 152F |
| Description: | ROLL Lock error |
| Causes: | • Connection failure of the 1st PAPER FEED MOTOR or the CR ENCODER. • The 1st PAPER FEED MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • 1st PAPER FEED MOTOR Encoder failure • 1st PAPER FEED MOTOR failure |
| Remedy: | Is there any problem such as damaged cable in the connections below? • 1st PAPER FEED MOTOR (1st PAPER FEED MOTOR Encoder) to MAIN BOARD (CN15). Replace the 1st PAPER FEED MOTOR. |
| Error code: | 1530 |
| Description: | PF heater 2 high temperature error (paper feeder 2) A temperature higher than 75C/167F is detected. |
| Causes: | Defective connector cable or poor contact in the connector. Shorted PF thermistor 2. Defective PF fan motor 2. Defective PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF fan motor 2 and PF main PWB (YC111) Shorted PF thermistor 2. Replace the side heater unit (Refer to the service manual for the paper feeder). Defective PF fan motor 2. Replace the side heater unit (Refer to the service manual for the paper feeder). Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1531 |
| Description: | Release Sensor error |
| Causes: | 1. Connection failure of the Release Sensor. 2. Cannot detect the switching operation status of the driven roller. • Release Sensor failure • Release Motor failure |
| Remedy: | 1. Replace the Release Sensor. 2. Replace the Release Motor Assy. |
| Error code: | 153A |
| Description: | Overload error Overcurrent to the PRESSURE ROLLER MOTOR was detected. • PRESSURE ROLLER SENSOR cable is damaged. • PRESSURE ROLLER MOTOR cable is damaged. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure |
| Causes: | Overcurrent to the PRESSURE ROLLER MOTOR was detected. • PRESSURE ROLLER SENSOR cable is damaged. • PRESSURE ROLLER MOTOR cable is damaged. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure |
| Remedy: | Replace the PRESSURE ROLLER MOTOR. |
| Error code: | 153B |
| Description: | Over speed error The PRESSURE ROLLER MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • PRESSURE ROLLER SENSOR failure • PRESSURE ROLLER MOTOR driver failure |
| Causes: | The PRESSURE ROLLER MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • PRESSURE ROLLER SENSOR failure • PRESSURE ROLLER MOTOR driver failure |
| Remedy: | 1. Replace the PRESSURE ROLLER SENSOR. 2. Replace the MAIN BOARD. |
| Error code: | 153C |
| Description: | Reversing error The number of occurrences of reversing the PRESSURE ROLLER MOTOR has reached a predetermined limit. • The polarity of PRESSURE ROLLER MOTOR encoder cable is opposite. • The polarity of PRESSURE ROLLER MOTOR cable is opposite. |
| Causes: | The number of occurrences of reversing the PRESSURE ROLLER MOTOR has reached a predetermined limit. • The polarity of PRESSURE ROLLER MOTOR encoder cable is opposite. • The polarity of PRESSURE ROLLER MOTOR cable is opposite. |
| Remedy: | Replace the PRESSURE ROLLER MOTOR encoder cable/ PRESSURE ROLLER MOTOR. |
| Error code: | 153D |
| Description: | Driving time-out error Abnormally-long driving duration of the PRESSURE ROLLER MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the PRESSURE ROLLER MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 153E |
| Description: | Velocity deviation error The PRESSURE ROLLER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure • PRESSURE ROLLER MOTOR driver failure |
| Causes: | The PRESSURE ROLLER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure • PRESSURE ROLLER MOTOR driver failure |
| Remedy: | 1. Replace the PRESSURE ROLLER MOTOR encoder cable/PRESSURE ROLLER MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 153F |
| Description: | Lock error The PRESSURE ROLLER MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure |
| Causes: | The PRESSURE ROLLER MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure |
| Remedy: | Replace the PRESSURE ROLLER MOTOR encoder cable/ PRESSURE ROLLER MOTOR. |
| Error code: | 1540 |
| Description: | PF heater 1 high temperature error (paper feeder 3) A temperature higher than 75C/167F is detected. |
| Causes: | Defective connector cable or poor contact in the connector. Shorted PF thermistor 1. Defective PF fan motor 1. Defective PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF fan motor 1 and PF main PWB (YC111) Shorted PF thermistor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF fan motor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1541 |
| Description: | Cutter return error |
| Causes: | The Cutter cannot return to its home position. • Slipping of the teeth of the Cutter Timing Belt • CUTTER HOME POSITION SENSOR failure |
| Remedy: | TBD |
| Error code: | 1549 |
| Description: | Motor disconnection error |
| Causes: | • Connection between the SUB-B BOARD and the MAIN BOARD has an abnormality. • The CUTTER UNIT operation is not detected. • Irregular load • CUTTER MOTOR Assy cable is damaged. • CUTTER MOTOR ENCORDER failure. • CUTTER MOTOR failure |
| Remedy: | TBD |
| Error code: | 154A |
| Description: | Overload error Overcurrent to the cutter motor was detected. • Cutter motor encoder cable is damaged. • Cutter motor cable is damaged. • Irregular load • Cutter motor encoder failure • Cutter motor failure |
| Causes: | Overcurrent to the CUTTER MOTOR was detected. • CUTTER MOTOR ENCORDER cable is damaged. • CUTTER MOTOR cable is damaged. • Irregular load • CUTTER MOTOR ENCORDER failure • CUTTER MOTOR failure |
| Remedy: | Replace the cutter motor/cutter motor encoder (CUTTER UNIT). |
| Error code: | 154B |
| Description: | Over speed error The cutter motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Cutter motor encoder failure • Cutter motor driver failure |
| Causes: | The CUTTER MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CUTTER MOTOR ENCORDER failure • CUTTER MOTOR driver failure |
| Remedy: | 1. Replace the cutter motor encoder (CUTTER UNIT). 2. Replace the SUB-B BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 154C |
| Description: | Reversing error The number of occurrences of reversing the cutter motor has reached a predetermined limit. • The polarity of cutter motor encoder cable is opposite. • The polarity of cutter motor cable is opposite. |
| Causes: | The number of occurrences of reversing the CUTTER MOTOR has reached a predetermined limit. • The polarity of CUTTER MOTOR ENCORDER cable is opposite. • The polarity of CUTTER MOTOR cable is opposite. |
| Remedy: | Replace the cutter motor/cutter motor encoder (CUTTER UNIT). |
| Error code: | 154D |
| Description: | Driving time-out error Abnormally-long driving duration of the cutter motor was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the CUTTER MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 154E |
| Description: | Velocity deviation error The cutter motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Cutter motor encoder failure • Cutter motor failure • Cutter motor driver failure |
| Causes: | The CUTTER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CUTTER MOTOR ENCORDER failure • CUTTER MOTOR failure • CUTTER MOTOR driver failure |
| Remedy: | 1. Replace the cutter motor encoder (CUTTER UNIT). 2. Replace the SUB-B BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 154F |
| Description: | Lock error The cutter motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Cutter motor encoder failure • Cutter motor failure |
| Causes: | The CUTTER MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • CUTTER MOTOR ENCORDER failure • CUTTER MOTOR failure |
| Remedy: | Replace the cutter motor/cutter motor encoder (CUTTER UNIT). |
| Error code: | 1551 |
| Description: | Paper Thickness Sensor error |
| Causes: | • During detection of paper thickness, the thickness cannot be determined because the sensor is not stable due to vibration or the like. • The PAPER THICKNESS SENSOR is damaged and cannot detect the paper thickness correctly. |
| Remedy: | TBD |
| Error code: | 155A |
| Description: | DCP Motor overload error |
| Causes: | The electric current flowing when driving the motor is irregularly large. • Decompression Pump cable is damaged. • Irregular load • Decompression Pump encoder failure • Decompression Pump failure |
| Remedy: | Replace the Decompression Pump. |
| Error code: | 155B |
| Description: | DCP Motor over speed error |
| Causes: | Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Decompression Pump encoder failure • SUB Board is damaged. • Decompression Pump driver failure |
| Remedy: | 1. Replace the Decompression Pump. 2. Replace the SUB-B Board. 3. Replace the Main Board. |
| Error code: | 155C |
| Description: | DCP Motor reversing error |
| Causes: | Detects accumulatively more than the specified number of times that it is being driven in the opposite direction to the specified driving direction. • The polarity of Decompression Pump Assy cable is opposite. • Decompression Pump Assy encoder failure |
| Remedy: | Replace the Decompression Pump. |
| Error code: | 155D |
| Description: | DCP Motor driving time-out error |
| Causes: | Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board. |
| Error code: | 155E |
| Description: | DCP Motor velocity deviation error |
| Causes: | Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Decompression Pump Assy encoder failure • Decompression Pump failure • SUB Board is damaged. • Decompression Pump driver failure |
| Remedy: | 1. Replace the Decompression Pump. 2. Replace the SUB-B Board. 3. Replace the Main Board. |
| Error code: | 155F |
| Description: | DCP Motor lock error |
| Causes: | 1. Connection failure of the Decompression Pump Assy. 2. Detects that it is being driven at an irregularly slower speed than the specified value. • Irregular load • Decompression Pump Assy encoder failure • Decompression Pump failure |
| Remedy: | Replace the Decompression Pump. |
| Error code: | 1561 |
| Description: | Paper thickness at power-on error |
| Causes: | At power-on, the PAPER THICKNESS SENSOR detects more than 2.2mm paper thickness. |
| Remedy: | TBD |
| Error code: | 1562 |
| Description: | ASF Motor abnormal load detection error |
| Causes: | When driving the ASF motor, the electric current to drive the motor exceeded the threshold value continuously more than specified times. • Paper feed error at the ASF • Connection between the ASF Motor and the SUB-C Board has an abnormality. • ASF Motor Assy encoder failure • ASF Motor failure |
| Remedy: | Replace the ASF Motor Assy. |
| Error code: | 156A |
| Description: | ASF Motor overload error |
| Causes: | The electric current flowing when driving the motor is irregularly large. • Irregular load • ASF Motor Assy cable is damaged. • ASF Motor Assy encoder failure • ASF Motor failure |
| Remedy: | Replace the ASF Motor Assy. |
| Error code: | 156B |
| Description: | ASF Motor over speed error |
| Causes: | Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • ASF Motor Assy encoder failure • SUB Board is damaged. • ASF Motor driver failure |
| Remedy: | 1. Replace the ASF Motor Assy. 2. Replace the SUB-C Board. 3. Replace the Main Board. |
| Error code: | 156C |
| Description: | ASF Motor reversing error |
| Causes: | Detects accumulatively more than the specified number of times that it is being driven in the opposite direction to the specified driving direction. • The polarity of ASF Motor Assy cable is opposite. • ASF Motor Assy encoder failure |
| Remedy: | Replace the ASF Motor Assy. |
| Error code: | 156D |
| Description: | ASF Motor driving time-out error |
| Causes: | Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board. |
| Error code: | 156E |
| Description: | ASF Motor velocity deviation error |
| Causes: | Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • ASF Motor Assy encoder failure • ASF Motor failure • SUB Board is damaged. • ASF Motor driver failure |
| Remedy: | 1. Replace the ASF Motor Assy. 2. Replace the SUB-C Board. 3. Replace the Main Board. |
| Error code: | 156F |
| Description: | ASF Motor lock error |
| Causes: | Detects that it is being driven at an irregularly slower speed than the specified value. • Irregular load • ASF Motor Assy encoder failure • ASF Motor failure |
| Remedy: | Replace the ASF Motor Assy. |
| Error code: | 1571 |
| Description: | ASF Retard Roller Sensor operation error |
| Causes: | ASF Retard Roller is not operating. • Connection failure of the Retard Roller Sensor. • Retard Roller Sensor failure • ASF Sub Motor failure |
| Remedy: | 1. Replace the Retard Roller Sensor. 2. Replace the ASF Sub Motor Assy. |
| Error code: | 1572 |
| Description: | ASF Pickup Roller operation error |
| Causes: | ASF Pickup Roller is not operating. • Connection failure of the Pickup Unit Sensor. • Pickup Unit Sensor failure • ASF Sub Motor failure |
| Remedy: | 1. Replace the Pickup Unit Sensor. 2. Replace the ASF Sub Motor Assy. . |
| Error code: | 1573 |
| Description: | ASF Assist Roller operation error |
| Causes: | ASF Assist Roller is not operating. • Connection failure of the Assist Roller Sensor. • Assist Roller Sensor failure • ASF Sub Motor failure |
| Remedy: | 1. Replace the Assist Roller Sensor. 2. Replace the ASF Sub Motor Assy. |
| Error code: | 157A |
| Description: | ASF Sub Motor overload error |
| Causes: | The electric current flowing when driving the motor is irregularly large. • Irregular load • ASF Sub Motor Assy cable is damaged. • ASF Sub Motor Assy encoder failure • ASF Sub Motor failure |
| Remedy: | Replace the ASF Sub Motor Assy. |
| Error code: | 157B |
| Description: | ASF Sub Motor over speed error |
| Causes: | Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • ASF Sub Motor Assy encoder failure • ASF Sub Motor failure • SUB Board is damaged. • ASF Sub Motor driver failure |
| Remedy: | 1. Replace the ASF Sub Motor Assy. 2. Replace the SUB-B Board. 3. Replace the Main Board. |
| Error code: | 157C |
| Description: | ASF Sub Motor reversing error |
| Causes: | Detects accumulatively more than the specified number of times that it is being driven in the opposite direction to the specified driving direction. • The polarity of ASF Sub Motor Assy cable is opposite. • ASF Sub Motor Assy encoder failure |
| Remedy: | Replace the ASF Sub Motor Assy. |
| Error code: | 157D |
| Description: | ASF Sub Motor driving time-out error |
| Causes: | Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board. |
| Error code: | 157E |
| Description: | ASF Sub Motor velocity deviation error |
| Causes: | Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • ASF Sub Motor Assy encoder failure • ASF Sub Motor failure • SUB Board is damaged. • ASF Sub Motor driver failure |
| Remedy: | 1. Replace the ASF Sub Motor Assy. 2. Replace the SUB-B Board. 3. Replace the Main Board. |
| Error code: | 157F |
| Description: | ASF Sub Motor lock error |
| Causes: | 1. Connection failure of the ASF Sub Motor Assy. 2. Detects that it is being driven at an irregularly slower speed than the specified value. • Irregular load • ASF Sub Motor Assy encoder failure • ASF Sub Motor failure |
| Remedy: | Replace the ASF Sub Motor Assy. |
| Error code: | 1581 |
| Description: | Paper eject position error |
| Causes: | When paper eject position is shifting, it cannot be shifted properly or this operation itself cannot be detected (Release => low load star wheels => high load star wheels). • Foreign object is stuck. • Connection error of the Eject Star Wheels Position Sensor • Eject Star Wheels Position Sensor failure • Edge Release Assy encoder failure • Edge Release Assy failure |
| Remedy: | 1. Replace the Eject Star Wheels Position Sensor. 2. Replace the Edge Release Assy. |
| Error code: | 1582 |
| Description: | ASF Edge Guide open/close error |
| Causes: | ASF Edge Guide is not operating. The operation of the ASF Edge Guide is not detected. • Connection failure of the EG Sensor. • EG Sensor failure • Edge Release Assy encoder failure • Edge Release Assy failure |
| Remedy: | 1. Replace the Edge Sensor. 2. Replace the Edge Release Assy. |
| Error code: | 158A |
| Description: | EG Motor overload error |
| Causes: | The electric current flowing when driving the motor is irregularly large. • Irregular load • Edge Release Assy cable is damaged. • Edge Release Assy encoder failure • Edge Release Assy failure |
| Remedy: | Replace the Edge Release Assy. |
| Error code: | 158B |
| Description: | EG Motor over speed error |
| Causes: | Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Edge Release Assy encoder failure • Edge Release Assy failure • SUB Board is damaged. • Edge Release Assy driver failure |
| Remedy: | 1. Replace the Edge Release Assy. 2. Replace the SUB-B Board. 3. Replace the Main Board. |
| Error code: | 158C |
| Description: | EG Motor reversing error |
| Causes: | Detects accumulatively more than the specified number of times that it is being driven in the opposite direction to the specified driving direction. • The polarity of Edge Release Assy cable is opposite. • Edge Release Assy encoder failure |
| Remedy: | Replace the Edge Release Assy. |
| Error code: | 158D |
| Description: | EG Motor driving time-out error |
| Causes: | Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board. |
| Error code: | 158E |
| Description: | EG Motor velocity deviation error |
| Causes: | Detects, when accelerating/decelerating the motor, that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Edge Release Assy encoder failure • Edge Release Assy failure • SUB Board is damaged. • Edge Release Assy driver failure |
| Remedy: | 1. Replace the Edge Release Assy. 2. Replace the SUB-B Board. 3. Replace the Main Board. |
| Error code: | 158F |
| Description: | EG Motor lock error |
| Causes: | 1. Connection failure of the Edge Release Assy. 2. Detects that it is being driven at an irregularly slower speed than the specified value. • Irregular load • Edge Release Assy encoder failure • Edge Release Assy failure |
| Remedy: | Replace the Edge Release Assy. |
| Error code: | 159A |
| Description: | Overload error Overcurrent to the ATC MOTOR was detected. • ATC MOTOR cable disconnection. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure |
| Causes: | Overcurrent to the ATC MOTOR was detected. • ATC MOTOR cable disconnection. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure |
| Remedy: | Replace the ATC MOTOR. |
| Error code: | 159B |
| Description: | Over speed error The ATC Motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • ATC MOTOR encoder failure • APG MOTOR driver failure |
| Causes: | The ATC MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • ATC MOTOR encoder failure • APG MOTOR driver failure |
| Remedy: | 1. Replace the ATC MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 159C |
| Description: | Reversing error The number of occurrences of reversing the ATC Motor has reached a predetermined limit. • The polarity of ATC MOTOR cable is opposite. • ATC MOTOR failure |
| Causes: | The number of occurrences of reversing the ATC MOTOR has reached a predetermined limit. • The polarity of ATC MOTOR cable is opposite. • ATC MOTOR failure |
| Remedy: | Replace the ATC MOTOR. |
| Error code: | 159D |
| Description: | Driving time-out error Abnormally-long driving duration of the ATC MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the ATC MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 159E |
| Description: | Velocity deviation error The ATC MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure • ATC MOTOR driver failure |
| Causes: | The ATC MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure • ATC MOTOR driver failure |
| Remedy: | 1. Replace the ATC MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 159F |
| Description: | Lock error Connection failure of the ATC MOTOR. • The ATC MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure |
| Causes: | • Connection failure of the ATC MOTOR. • The ATC MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • ATC MOTOR encoder failure • ATC MOTOR failure |
| Remedy: | Replace the ATC MOTOR. |
| Error code: | 1801 |
| Description: | AID communication error |
| Causes: | An error occurs during AID communication check. • Connection failure of the AID Board. • AID Board failure |
| Remedy: | Replace the AID Board. |
| Error code: | 1A23 |
| Description: | Incorrect RTC data error The various absolute time settings stored on the NVRAM are abnormal. |
| Causes: | The various absolute time settings stored on the NVRAM are abnormal. |
| Remedy: | If the error still occurs after resetting the date and time, perform the followings. 1. Replace the RTC backup battery. 2. Replace the MAIN BOARD. |
| Error code: | 1A26 |
| Description: | RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions |
| Causes: | The RTC circuit on the MAIN BOARD malfunctions. |
| Remedy: | 1. Turn the power off and remove the RTC backup battery. 2. After several seconds, re-attach the battery and turn the power back on. 3. Reset the date and time settings of the RTC using the Service Program. |
| Error code: | 1A37 |
| Description: | Thermistor error The HEAD FFC is not connected correctly. • A temperature out of a predetermined range was detected by the Head thermistor. • Head thermistor failure |
| Causes: | • The HEAD FFC is not connected correctly. • A temperature out of a predetermined range was detected by the Head thermistor. • Head thermistor failure |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. |
| Error code: | 1A38 |
| Description: | Transistor environmental temperature error Transistor failure • A temperature out of a predetermined range was detected by the Head thermistor. |
| Causes: | • Transistor failure • A temperature out of a predetermined range was detected by the Head thermistor. |
| Remedy: | Replace the PRINT HEAD. |
| Error code: | 1A39 |
| Description: | Head error Connection failure of the HEAD FFC. • Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle. • The drive circuit in the PRINT HEAD is damaged. • The fuse of the MAIN BOARD has blown. |
| Causes: | • Connection failure of the HEAD FFC. • Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle. • The drive circuit in the PRINT HEAD is damaged. • The fuse of the MAIN BOARD has blown. |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. 3. Replace the MAIN BOARD. |
| Error code: | 1A41 |
| Description: | Head rank ID input error An invalid Head rank ID was written to the NVRAM. |
| Causes: | An invalid Head rank ID was written to the NVRAM. |
| Remedy: | Rewrite the Head rank ID with a correct one. |
| Error code: | 1A50 |
| Description: | I2C communication error (Between elements on ASIC and MAIN) An I2C communication error has occurred in the MAIN BOARD |
| Causes: | An I2C communication error has occurred in the MAIN BOARD. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 1A51 |
| Description: | I2C communication error (Between elements on ASIC and SUB) An I2C communication error between the MAIN BOARD and SUB BOARD has occurred. |
| Causes: | An I2C communication error between the MAIN BOARD and SUB BOARD has occurred. |
| Remedy: | 1. Replace the FFC between the MAIN BOARD and SUB BOARD. 2. Replace the SUB BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 1AB0 |
| Description: | Main Board communication error (0) |
| Causes: | IC failure has occurred on the Main Board. |
| Remedy: | Replace the Main Board. |
| Error code: | 1AB1 |
| Description: | Main Board communication error (1) |
| Causes: | IC failure has occurred on the Main Board. |
| Remedy: | Replace the Main Board. |
| Error code: | 1AB2 |
| Description: | Main Board communication error (2) |
| Causes: | IC failure has occurred on the Main Board. |
| Remedy: | Replace the Main Board. |
| Error code: | 1AB3 |
| Description: | Main Board communication error (3) |
| Causes: | IC failure has occurred on the Main Board. |
| Remedy: | Replace the Main Board. |
| Error code: | 1AB4 |
| Description: | Main Board communication error (4) |
| Causes: | IC failure has occurred on the Main Board. |
| Remedy: | Replace the Main Board. |
| Error code: | 1AB5 |
| Description: | Main Board communication error (5) |
| Causes: | IC failure has occurred on the Main Board. |
| Remedy: | Replace the Main Board. |
| Error code: | 1AB6 |
| Description: | Main Board communication error (6) |
| Causes: | IC failure has occurred on the Main Board. |
| Remedy: | Replace the Main Board. |
| Error code: | 1AB7 |
| Description: | Main Board communication error (7) |
| Causes: | IC failure has occurred on the Main Board. |
| Remedy: | Replace the Main Board. |
| Error code: | 1F80 |
| Description: | CSIC control CSIC error |
| Causes: | • CSIC control error. • The drive circuit damage in the Print Head was caused by the 42V fuse blue out of the Main Board. |
| Remedy: | Check the resistance between terminals of “F4” fuse on the MAIN BOARD. 1. If the resistance value of “F4” on the MAIN BOARD is more than “1Ù”, -> The fuse has blown out. It is necessary to check whether the drive circuit in the PRINT HEAD has broken or not. [Check method] Pull out the PRINT HEAD FFC from “CN101” on the MAIN BOARD, then check the resistance value between “15th” pin and “19th” pin of the FFC terminal. -> more than “1MÙ”: Go to remedy “1”. -> less than “1MÙ”: Go to remedy “1” and “2”. 2. If the resistance value of “F4” on the MAIN BOARD is less than “1Ù”, -> The fuse has not blowing out. Go to remedy “3”. 1. Replace the MAIN BOARD. 2. Replace the PRINT HEAD 3. Replace the IC HOLDER. |
| Error code: | 1FB8 |
| Description: | CSIC control CSIC error |
| Causes: | CSIC control error |
| Remedy: | 1. Replace the IC HOLDER. 2. Replace the MAIN BOARD. |
| Error code: | 1FB9 |
| Description: | CSIC control CSIC error |
| Causes: | CSIC control error |
| Remedy: | 1. Replace the IC HOLDER. 2. Replace the MAIN BOARD. |
| Error code: | 1FBE |
| Description: | CSIC control CSIC error |
| Causes: | CSIC control error |
| Remedy: | 1. Replace the IC HOLDER. 2. Replace the MAIN BOARD. |
| Error code: | 1FBF |
| Description: | CSIC control CSIC error |
| Causes: | CSIC control error |
| Remedy: | 1. Replace the IC HOLDER. 2. Replace the MAIN BOARD. |
| Error code: | 1FC0 |
| Description: | CSIC control CSIC error |
| Causes: | CSIC control error |
| Remedy: | 1. Replace the IC HOLDER. 2. Replace the MAIN BOARD. |
| Error code: | 1FC1 |
| Description: | CSIC control CSIC error |
| Causes: | CSIC control error |
| Remedy: | 1. Replace the IC HOLDER. 2. Replace the MAIN BOARD. |
| Error code: | 1FC2 |
| Description: | CSIC control CSIC error |
| Causes: | CSIC control error |
| Remedy: | 1. Replace the IC HOLDER. 2. Replace the MAIN BOARD. |
| Error code: | 1FC3 |
| Description: | CSIC control CSIC error |
| Causes: | CSIC control error |
| Remedy: | 1. Replace the IC HOLDER. 2. Replace the MAIN BOARD. |
| Error code: | 1FC4 |
| Description: | ILS error (3) |
| Causes: | ILS control error has occurred. • The fuse of the Main Board has blown. |
| Remedy: | Replace the Main Board. |
| Error code: | 1FC5 |
| Description: | ILS error (4) |
| Causes: | ILS control error has occurred. • The fuse of the Main Board has blown. |
| Remedy: | Replace the Main Board. |
| Error code: | 1FC6 |
| Description: | ILS error (5) |
| Causes: | ILS control error has occurred. • Cartridge Holder Board failure • Main Board failure |
| Remedy: | 1. Replace the Cartridge Holder. (Check both right/left ones respectively.) 2. Replace the Main Board. |
| Error code: | 1FC7 |
| Description: | ILS error (6) |
| Causes: | ILS control error has occurred. • Cartridge Holder Board failure • Main Board failure |
| Remedy: | 1. Replace the Cartridge Holder. (Check both right/left ones respectively.) 2. Replace the Main Board. |
| Error code: | 1FC8 |
| Description: | ILS error (7) |
| Causes: | ILS control error has occurred. • Cartridge Holder Board failure • Main Board failure |
| Remedy: | 1. Replace the Cartridge Holder. (Check both right/left ones respectively.) 2. Replace the Main Board. |
| Error code: | 1FC9 |
| Description: | ILS error (8) |
| Causes: | ILS control error has occurred. • Cartridge Holder Board failure • Main Board failure |
| Remedy: | 1. Replace the Cartridge Holder. (Check both right/left ones respectively.) 2. Replace the Main Board. |
| Error code: | 1FCA |
| Description: | ILS error (9) |
| Causes: | ILS control error has occurred. • Cartridge Holder Board failure • Main Board failure |
| Remedy: | 1. Replace the Cartridge Holder. (Check both right/left ones respectively.) 2. Replace the Main Board. |
| Error code: | 1FCB |
| Description: | ILS error (10) |
| Causes: | ILS control error has occurred. • Cartridge Holder Board failure • Main Board failure |
| Remedy: | 1. Replace the Cartridge Holder. (Check both right/left ones respectively.) 2. Replace the Main Board. |
| Error code: | 2000 |
| Description: | DDA Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 2002 |
| Description: | Printer controller: FGATE error Printer application returned FGATE error notification to copier. |
| Causes: | • FGATE error |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 2003 |
| Description: | FLASH BOOT SUM CHECK error Installing the firmware has failed. • The Flash ROM is out of order. |
| Causes: | • Installing the firmware has failed. • The Flash ROM is out of order. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
| Error code: | 200A |
| Display: | Paper size not detected. Press Load/Eject and reload the paper. Paper size not detected. Reload paper. Paper size not detected. Press OK and reload the paper. |
| Description: | F/W load error Reading/decompressing the firmware has failed. |
| Causes: | Reading / decompressing the firmware has failed. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
| Error code: | 200D |
| Description: | System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred. |
| Causes: | A system failure such as CPU failure, or defective cash has occurred. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 3000 |
| Description: | Main Motor`s failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning. |
| Causes: | The AC power has been shut off due to a power failure, unplugged, PSH BOARD failure, or MAIN BOARD failure or the like. |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PWB-M connector for proper connection and correct as necessary. 4 M1 operation check PWB-M CNDM1-5 (REM) PWB-M CNDM1-8 (LOCK) K to L-2. 5 Change PWB-M. 6 Change PU1. |
| Error code: | Dxxy |
| Description: | Service call for FW debugging This error is intended to be used in the product development stage. It is supposed to not occur to marketed products, but may occur due to an unexpected cause such as external noises. |
| Causes: | This error is intended to be used in the product development stage. It is supposed to not occur to marketed products, but may occur due to an unexpected cause such as external noises. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
| Error code: | Fxxx |
| Description: | CPU related service call There is something wrong with the firmware |
| Causes: | There is something wrong with the firmware. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
