Epson Stylus Pro 7000
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
пьезоэлектрическая струйная
Макс. формат
A1
Число страниц в месяц
25000
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Тип |
струйный |
Технология печати |
пьезоэлектрическая струйная |
Копир |
|
Сканер |
|
Тип устройства |
Принтер |
Цветность печати |
цветная |
Число страниц в месяц |
25 000 |
Макс. формат |
A1 |
Область применения |
малый офис |
Принтер |
|
Двусторонняя печать |
|
Прямая печать |
|
Количество цветов |
6 |
Макс, разрешение для ч/б печати |
|
| По X | 1 440 |
Макс, разрешение для цветной печати |
|
| По Y | 720 |
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
5 000 |
Ресурс цветного картриджа/тонера |
5 000 |
Печать на: |
|
| Фотобумаге |
|
| Пленках |
|
| Этикетках |
|
Языки управления |
|
| PostScript |
|
Интерфейсы |
|
Инфракрасный порт |
|
Ethernet (RJ-45) |
|
LPT |
|
USB |
|
Память/Процессор |
|
Объем памяти |
10 |
Дополнительная информация |
|
Мин. системные требования |
Intel Pentium III |
Поддержка ОС |
|
| Mac OS |
|
| Linux |
|
| DOS |
|
| Windows |
|
Уровень шума |
|
| При работе | 50 |
Габариты |
|
Высота |
560 |
Ширина |
1 100 |
Вес |
44 |
Глубина |
572 |
Модули
Carriage Assembly
Cover Assembly
Frame Accessory
PAPER FEED ASSEMBLY
Maintenance Assembly
Head Assembly
Cable Guide
Ink Cartridge Holder Assembly
Board Base Assembly
Frame Assembly
Детали Ink Cartridge Holder Assembly
| Деталь: | P/S BOARD ASSY(220V) |
| Парткод: | 2035402 |
| Деталь: | PRINT HEAD,IJ192-0AD |
| Парткод: | F055040 |
| Деталь: | PRINT HEAD,IJ192-0AE |
| Парткод: | F055050 |
| Деталь: | HEAD TAPE CABLE1 |
| Парткод: | 1053503 |
| Деталь: | COMPRESSION SPRING,9.9 |
| Парткод: | 1030787 |
| Деталь: | DAMPER ASSY., |
| Парткод: | 1044238 |
| Деталь: | O RING,TUBE FASTEN |
| Парткод: | 1033483 |
| Деталь: | JOINT SCREWS,M6 |
| Парткод: | 1033482 |
| Деталь: | DAMPER STOPPER |
| Парткод: | 1053504 |
| Деталь: | SLIDE GEAR |
| Парткод: | 1053505 |
| Деталь: | CUTTER HOLDER |
| Парткод: | 1053506 |
| Деталь: | P EDGE SENSOR ASSY |
| Парткод: | 2034405 |
| Деталь: | CR ENC ASSY |
| Парткод: | 2034406 |
| Деталь: | CUTTER SOLENOID ASSY |
| Парткод: | 1053507 |
| Деталь: | CUTTER SOLENOID SPRING |
| Парткод: | 1053508 |
| Деталь: | CUTTER CAP |
| Парткод: | 1053509 |
| Деталь: | CUTTER SPRING |
| Парткод: | 1053510 |
| Деталь: | PRESS SHAFT TRAY |
| Парткод: | 1053511 |
| Деталь: | PRESS TRANSMISSION GEAR |
| Парткод: | 1053512 |
| Деталь: | PRESS LEVER |
| Парткод: | 1053513 |
| Деталь: | PRESS IDLE GEAR |
| Парткод: | 1053514 |
| Деталь: | CR MOTOR PULLEY ASSY |
| Парткод: | 2034407 |
| Деталь: | CR DRIVEN PULLEY ASSY |
| Парткод: | 1053515 |
| Деталь: | CR BELT |
| Парткод: | 1053516 |
| Деталь: | PHOTO SENSOR |
| Парткод: | 2034408 |
| Деталь: | HD SLID SENSOR ASSY |
| Парткод: | 2034409 |
| Деталь: | T FENCE |
| Парткод: | 1053517 |
| Деталь: | LEVER SENSOR CABEL ASSY |
| Парткод: | 2034410 |
| Деталь: | P THICK SENSOR CABLE ASSY |
| Парткод: | 2034411 |
| Деталь: | CR HP CABLE ASSY |
| Парткод: | 2034412 |
| Деталь: | RUBBER FOOT |
| Парткод: | 1053493 |
| Деталь: | VACUUM FAN |
| Парткод: | 1053494 |
| Деталь: | VACUUM FAN 1 CABLE |
| Парткод: | 1053495 |
| Деталь: | VACUUM FAN 2 CABLE |
| Парткод: | 1053496 |
| Деталь: | P REAR SENSOR ASSY |
| Парткод: | 2034396 |
| Деталь: | PF MOTOR PULLEY ASSY |
| Парткод: | 2034404 |
| Деталь: | SPACER,X MOTOR |
| Парткод: | 1053497 |
| Деталь: | BEARING PF MOTOR |
| Парткод: | 1053499 |
| Деталь: | X REDUCTION BELT |
| Парткод: | 1053500 |
| Деталь: | PF MOTOR PULLEY ASSY |
| Парткод: | 1053501 |
| Деталь: | PF ENCODER CABLE |
| Парткод: | 1053502 |
| Деталь: | LABEL,PAPER LEVER SET UP, B |
| Парткод: | 1054159 |
| Деталь: | LABEL,HAND POSITION,RIGHT, B |
| Парткод: | 1054160 |
| Деталь: | LABEL,HAND POSITION,LEFT, B |
| Парткод: | 1054161 |
| Деталь: | LABEL,INK MODEL NUMBER,BK, B |
| Парткод: | 1054162 |
| Деталь: | LABEL,INK MODEL NUMBER,C, B |
| Парткод: | 1054163 |
| Деталь: | LABEL,INK MODEL NUMBER,M, B |
| Парткод: | 1054164 |
| Деталь: | LABEL,INK MODEL NUMBER,LC, B |
| Парткод: | 1054165 |
| Деталь: | LABEL,INK MODEL NUMBER,LM, B |
| Парткод: | 1054166 |
| Деталь: | LABEL,INK MODEL NUMBER,Y, B |
| Парткод: | 1054167 |
| Деталь: | GROUNDING PLATE,I/F,UPPER |
| Парткод: | 1011863 |
| Деталь: | INLET ASSY |
| Парткод: | 2034421 |
| Деталь: | DC CABLE ASSY |
| Парткод: | 2034422 |
| Деталь: | H TOP COVER ASSY |
| Парткод: | 1053538 |
| Деталь: | LOGO PLATE(OVERSEAS) |
| Парткод: | 1055935 |
| Деталь: | STATIC-DISCHARGE BRUSH |
| Парткод: | 1053540 |
| Деталь: | CATCH |
| Парткод: | 1053541 |
| Деталь: | I/H COVER ASSY |
| Парткод: | 1053542 |
| Деталь: | FRONT COVER ASSY |
| Парткод: | 1053543 |
| Деталь: | FRONT COVER SUPPLEMENT |
| Парткод: | 1053544 |
| Деталь: | R SIDE COVER ASSY |
| Парткод: | 1053545 |
| Деталь: | LEVER BRIND SHEET |
| Парткод: | 1053546 |
| Деталь: | LEVER BRIND CAP |
| Парткод: | 1053547 |
| Деталь: | L SIDE COVER ASSY |
| Парткод: | 1053548 |
| Деталь: | HANDLE RUBBER B |
| Парткод: | 1053549 |
| Деталь: | TOP COVER |
| Парткод: | 1053550 |
| Деталь: | ROLL SUPPORT R ASSY |
| Парткод: | 1053551 |
| Деталь: | ROLL SUPPORT L ASSY |
| Парткод: | 1053553 |
| Деталь: | BRANL PANEL |
| Парткод: | 1053554 |
| Деталь: | I/H COVER LID ASSY |
| Парткод: | 1053555 |
| Деталь: | PANEL SHEET (ENGLISH) |
| Парткод: | 1055704 |
| Деталь: | PANEL TAPE CABLE |
| Парткод: | 1053557 |
| Деталь: | PRESS LEVER KNOB |
| Парткод: | 1053558 |
| Деталь: | PANEL UNIT ASSY |
| Парткод: | 2035403 |
| Деталь: | FLANGE (2 INCH R) |
| Парткод: | 1053559 |
| Деталь: | FLANGE (3 INCH R) |
| Парткод: | 1053561 |
| Деталь: | FLANGE(2 INCH) |
| Парткод: | 1053560 |
| Деталь: | FLANGE(3 INCH L) |
| Парткод: | 1053562 |
| Деталь: | INK CARTRIDGE (BOXED) |
| Парткод: | 1051606 |
| Деталь: | INK CARTRIDGE (BOXED) |
| Парткод: | 1051607 |
| Деталь: | INK CARTRIDGE (BOXED) |
| Парткод: | 1051608 |
| Деталь: | INK CARTRIDGE (BOXED) |
| Парткод: | 1051609 |
| Деталь: | INK CARTRIDGE (BOXED) |
| Парткод: | 1051610 |
| Деталь: | INK CARTRIDGE (BOXED) |
| Парткод: | 1051611 |
| Деталь: | USERS GUIDE |
| Парткод: | 4011732 |
| Деталь: | UNPACKING SHEET |
| Парткод: | 4011817 |
| Деталь: | SUPPLEMENT |
| Парткод: | 4011818 |
| Деталь: | SETTING UP MANUAL |
| Парткод: | 4011821 |
| Деталь: | ROLL BAND |
| Парткод: | 1055028 |
| Деталь: | CONVERSION KIT |
| Парткод: | 1059330 |
| Деталь: | RUBBER FOOT |
| Парткод: | 1053493 |
| Деталь: | VACUUM FAN |
| Парткод: | 1053494 |
| Деталь: | VACUUM FAN 1 CABLE |
| Парткод: | 1053495 |
| Деталь: | VACUUM FAN 2 CABLE |
| Парткод: | 1053496 |
| Деталь: | P REAR SENSOR ASSY |
| Парткод: | 2034396 |
| Деталь: | PF MOTOR PULLEY ASSY |
| Парткод: | 2034404 |
| Деталь: | SPACER,X MOTOR |
| Парткод: | 1053497 |
| Деталь: | BEARING PF MOTOR |
| Парткод: | 1053499 |
| Деталь: | X REDUCTION BELT |
| Парткод: | 1053500 |
| Деталь: | PF MOTOR PULLEY ASSY |
| Парткод: | 1053501 |
| Деталь: | PF ENCODER CABLE |
| Парткод: | 1053502 |
| Деталь: | LABEL,PAPER LEVER SET UP, B |
| Парткод: | 1054159 |
| Деталь: | LABEL,HAND POSITION,RIGHT, B |
| Парткод: | 1054160 |
| Деталь: | LABEL,HAND POSITION,LEFT, B |
| Парткод: | 1054161 |
| Деталь: | LABEL,INK MODEL NUMBER,BK, B |
| Парткод: | 1054162 |
| Деталь: | LABEL,INK MODEL NUMBER,C, B |
| Парткод: | 1054163 |
| Деталь: | LABEL,INK MODEL NUMBER,M, B |
| Парткод: | 1054164 |
| Деталь: | LABEL,INK MODEL NUMBER,LC, B |
| Парткод: | 1054165 |
| Деталь: | LABEL,INK MODEL NUMBER,LM, B |
| Парткод: | 1054166 |
| Деталь: | LABEL,INK MODEL NUMBER,Y, B |
| Парткод: | 1054167 |
| Деталь: | P/S CABLE |
| Парткод: | 2035399 |
| Деталь: | P FRONT SENSOR ASSY |
| Парткод: | 2034413 |
| Деталь: | WASTE INK BOX |
| Парткод: | 1053518 |
| Деталь: | POROUS PAD,INK EJECT |
| Парткод: | 1050828 |
| Деталь: | SUB PLATEN A |
| Парткод: | 1053520 |
| Деталь: | SUB PLATEN B |
| Парткод: | 1053521 |
| Деталь: | PAPER OUTLET ROLLER ASSY |
| Парткод: | 1053522 |
| Деталь: | COVER SENSOR ASSY |
| Парткод: | 1053523 |
| Деталь: | CLAMP |
| Парткод: | 1053524 |
| Деталь: | PAPER GUIDE TRAY |
| Парткод: | 1053525 |
| Деталь: | WASTE INK TANK STOPPER |
| Парткод: | 1053519 |
| Деталь: | MOTOR ASSY.,ASF |
| Парткод: | 2024719 |
| Деталь: | PUMP REDUCTION GEAR 3 |
| Парткод: | 1053527 |
| Деталь: | PUMP REDUCTION GEAR 4 |
| Парткод: | 1053528 |
| Деталь: | PUMP ASSY. |
| Парткод: | 1050829 |
| Деталь: | CLEANER,HEAD,ASP |
| Парткод: | 1033209 |
| Деталь: | PUMP GEAR |
| Парткод: | 1054171 |
| Деталь: | CAP ASSY. |
| Парткод: | 1045666 |
| Деталь: | PUMP REDUCTION GEAR 1 |
| Парткод: | 1053529 |
| Деталь: | PUMP REDUCTION GEAR 2 |
| Парткод: | 1053530 |
| Деталь: | PG IDLER GEAR A |
| Парткод: | 1053531 |
| Деталь: | PG IDLER GEAR B |
| Парткод: | 1053532 |
| Деталь: | FLASHING BOX ASSY |
| Парткод: | 1053533 |
| Деталь: | DAMPER,CR |
| Парткод: | 1012618 |
| Деталь: | SHAFT,DAMPER,CR, B |
| Парткод: | 1017596 |
| Деталь: | PLAIN WASHER,3.31.58,S/NA |
| Парткод: | 1038605 |
| Деталь: | RUBBER FOOT |
| Парткод: | 1053493 |
| Деталь: | VACUUM FAN |
| Парткод: | 1053494 |
| Деталь: | VACUUM FAN 1 CABLE |
| Парткод: | 1053495 |
| Деталь: | VACUUM FAN 2 CABLE |
| Парткод: | 1053496 |
| Деталь: | P REAR SENSOR ASSY |
| Парткод: | 2034396 |
| Деталь: | PF MOTOR PULLEY ASSY |
| Парткод: | 2034404 |
| Деталь: | SPACER,X MOTOR |
| Парткод: | 1053497 |
| Деталь: | BEARING PF MOTOR |
| Парткод: | 1053499 |
| Деталь: | X REDUCTION BELT |
| Парткод: | 1053500 |
| Деталь: | PF MOTOR PULLEY ASSY |
| Парткод: | 1053501 |
| Деталь: | PF ENCODER CABLE |
| Парткод: | 1053502 |
| Деталь: | LABEL,PAPER LEVER SET UP, B |
| Парткод: | 1054159 |
| Деталь: | LABEL,HAND POSITION,RIGHT, B |
| Парткод: | 1054160 |
| Деталь: | LABEL,HAND POSITION,LEFT, B |
| Парткод: | 1054161 |
| Деталь: | LABEL,INK MODEL NUMBER,BK, B |
| Парткод: | 1054162 |
| Деталь: | LABEL,INK MODEL NUMBER,C, B |
| Парткод: | 1054163 |
| Деталь: | LABEL,INK MODEL NUMBER,M, B |
| Парткод: | 1054164 |
| Деталь: | LABEL,INK MODEL NUMBER,LC, B |
| Парткод: | 1054165 |
| Деталь: | LABEL,INK MODEL NUMBER,LM, B |
| Парткод: | 1054166 |
| Деталь: | LABEL,INK MODEL NUMBER,Y, B |
| Парткод: | 1054167 |
| Деталь: | P/S CABLE |
| Парткод: | 2035399 |
| Деталь: | P FRONT SENSOR ASSY |
| Парткод: | 2034413 |
| Деталь: | WASTE INK BOX |
| Парткод: | 1053518 |
| Деталь: | POROUS PAD,INK EJECT |
| Парткод: | 1050828 |
| Деталь: | SUB PLATEN A |
| Парткод: | 1053520 |
| Деталь: | SUB PLATEN B |
| Парткод: | 1053521 |
| Деталь: | PAPER OUTLET ROLLER ASSY |
| Парткод: | 1053522 |
| Деталь: | COVER SENSOR ASSY |
| Парткод: | 1053523 |
| Деталь: | CLAMP |
| Парткод: | 1053524 |
| Деталь: | PAPER GUIDE TRAY |
| Парткод: | 1053525 |
| Деталь: | WASTE INK TANK STOPPER |
| Парткод: | 1053519 |
| Деталь: | MOTOR ASSY.,ASF |
| Парткод: | 2024719 |
| Деталь: | PUMP REDUCTION GEAR 3 |
| Парткод: | 1053527 |
| Деталь: | PUMP REDUCTION GEAR 4 |
| Парткод: | 1053528 |
| Деталь: | PUMP ASSY. |
| Парткод: | 1050829 |
| Деталь: | CLEANER,HEAD,ASP |
| Парткод: | 1033209 |
| Деталь: | PUMP GEAR |
| Парткод: | 1054171 |
| Деталь: | CAP ASSY. |
| Парткод: | 1045666 |
| Деталь: | PUMP REDUCTION GEAR 1 |
| Парткод: | 1053529 |
| Деталь: | PUMP REDUCTION GEAR 2 |
| Парткод: | 1053530 |
| Деталь: | PG IDLER GEAR A |
| Парткод: | 1053531 |
| Деталь: | PG IDLER GEAR B |
| Парткод: | 1053532 |
| Деталь: | FLASHING BOX ASSY |
| Парткод: | 1053533 |
| Деталь: | DAMPER,CR |
| Парткод: | 1012618 |
| Деталь: | SHAFT,DAMPER,CR, B |
| Парткод: | 1017596 |
| Деталь: | PLAIN WASHER,3.31.58,S/NA |
| Парткод: | 1038605 |
| Деталь: | P/S BOARD ASSY(220V) |
| Парткод: | 2035402 |
| Деталь: | PRINT HEAD,IJ192-0AD |
| Парткод: | F055040 |
| Деталь: | PRINT HEAD,IJ192-0AE |
| Парткод: | F055050 |
| Деталь: | HEAD TAPE CABLE1 |
| Парткод: | 1053503 |
| Деталь: | COMPRESSION SPRING,9.9 |
| Парткод: | 1030787 |
| Деталь: | DAMPER ASSY., |
| Парткод: | 1044238 |
| Деталь: | O RING,TUBE FASTEN |
| Парткод: | 1033483 |
| Деталь: | JOINT SCREWS,M6 |
| Парткод: | 1033482 |
| Деталь: | DAMPER STOPPER |
| Парткод: | 1053504 |
| Деталь: | SLIDE GEAR |
| Парткод: | 1053505 |
| Деталь: | CUTTER HOLDER |
| Парткод: | 1053506 |
| Деталь: | P EDGE SENSOR ASSY |
| Парткод: | 2034405 |
| Деталь: | CR ENC ASSY |
| Парткод: | 2034406 |
| Деталь: | CUTTER SOLENOID ASSY |
| Парткод: | 1053507 |
| Деталь: | CUTTER SOLENOID SPRING |
| Парткод: | 1053508 |
| Деталь: | CUTTER CAP |
| Парткод: | 1053509 |
| Деталь: | CUTTER SPRING |
| Парткод: | 1053510 |
| Деталь: | PRESS SHAFT TRAY |
| Парткод: | 1053511 |
| Деталь: | PRESS TRANSMISSION GEAR |
| Парткод: | 1053512 |
| Деталь: | PRESS LEVER |
| Парткод: | 1053513 |
| Деталь: | PRESS IDLE GEAR |
| Парткод: | 1053514 |
| Деталь: | CR MOTOR PULLEY ASSY |
| Парткод: | 2034407 |
| Деталь: | CR DRIVEN PULLEY ASSY |
| Парткод: | 1053515 |
| Деталь: | CR BELT |
| Парткод: | 1053516 |
| Деталь: | PHOTO SENSOR |
| Парткод: | 2034408 |
| Деталь: | HD SLID SENSOR ASSY |
| Парткод: | 2034409 |
| Деталь: | T FENCE |
| Парткод: | 1053517 |
| Деталь: | LEVER SENSOR CABEL ASSY |
| Парткод: | 2034410 |
| Деталь: | P THICK SENSOR CABLE ASSY |
| Парткод: | 2034411 |
| Деталь: | CR HP CABLE ASSY |
| Парткод: | 2034412 |
| Деталь: | TUBE,SUPPLY,INK,B |
| Парткод: | 1051639 |
| Деталь: | TUBE,SUPPLY,INK,C |
| Парткод: | 1051640 |
| Деталь: | TUBE,SUPPLY,INK,M |
| Парткод: | 1051641 |
| Деталь: | TUBE,SUPPLY,INK,LM |
| Парткод: | 1051642 |
| Деталь: | TUBE,SUPPLY,INK,Y |
| Парткод: | 1051643 |
| Деталь: | TUBE,SUPPLY,INK,LC |
| Парткод: | 1053202 |
| Деталь: | STEEL BAR |
| Парткод: | 1053535 |
| Деталь: | CR TAPE CABLE |
| Парткод: | 1053536 |
| Деталь: | TUBE GUIDE |
| Парткод: | 1053537 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2033028 |
| Деталь: | JOINT SCREWS,M6 |
| Парткод: | 1033482 |
| Деталь: | O RING,TUBE FASTEN |
| Парткод: | 1033483 |
| Деталь: | JOINT,BK |
| Парткод: | 1033481 |
| Деталь: | TUBE CUSHION |
| Парткод: | 1053534 |
| Деталь: | HOLDER,GUIDE,I/C,UPPER |
| Парткод: | 1050822 |
| Деталь: | FRAME ASSY.,NEEDLE |
| Парткод: | 1033929 |
| Деталь: | INK SENSOR K ASSY |
| Парткод: | 2034414 |
| Деталь: | INK SENSOR C ASSY |
| Парткод: | 2034415 |
| Деталь: | INK SENSOR MASSY |
| Парткод: | 2034416 |
| Деталь: | INK SENSOR LC ASSY |
| Парткод: | 2034417 |
| Деталь: | INK SENSOR LM ASSY |
| Парткод: | 2034418 |
| Деталь: | INK SENSORY ASSY |
| Парткод: | 2034419 |
| Деталь: | FRAME,HOLDER,I/C,UNDER |
| Парткод: | 1050825 |
| Деталь: | POROUS PAD,HOLDER,I/C |
| Парткод: | 1050826 |
| Деталь: | TAPE,20X22 |
| Парткод: | 1050827 |
| Деталь: | O RING,TUBE FASTEN |
| Парткод: | 1033483 |
| Деталь: | JOINT SCREWS,M6 |
| Парткод: | 1033482 |
| Деталь: | TORSION SPRING,3490 |
| Парткод: | 1001468 |
| Деталь: | HOLDING PLATE,HOLDER,INK CART. |
| Парткод: | 1007731 |
| Деталь: | COVER,HOLDER,INK CART. |
| Парткод: | 1033461 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2033026 |
| Деталь: | GROUNDING PLATE,I/F |
| Парткод: | 1005382 |
| Деталь: | GUIDE,I/F BOARD |
| Парткод: | 1006374 |
| Деталь: | GROUNDING PLATE,I/F,UPPER |
| Парткод: | 1011863 |
| Деталь: | INLET ASSY |
| Парткод: | 2034421 |
| Деталь: | DC CABLE ASSY |
| Парткод: | 2034422 |
| Деталь: | RUBBER FOOT |
| Парткод: | 1053493 |
| Деталь: | VACUUM FAN |
| Парткод: | 1053494 |
| Деталь: | VACUUM FAN 1 CABLE |
| Парткод: | 1053495 |
| Деталь: | VACUUM FAN 2 CABLE |
| Парткод: | 1053496 |
| Деталь: | P REAR SENSOR ASSY |
| Парткод: | 2034396 |
| Деталь: | PF MOTOR PULLEY ASSY |
| Парткод: | 2034404 |
| Деталь: | SPACER,X MOTOR |
| Парткод: | 1053497 |
| Деталь: | BEARING PF MOTOR |
| Парткод: | 1053499 |
| Деталь: | X REDUCTION BELT |
| Парткод: | 1053500 |
| Деталь: | PF MOTOR PULLEY ASSY |
| Парткод: | 1053501 |
| Деталь: | PF ENCODER CABLE |
| Парткод: | 1053502 |
| Деталь: | LABEL,PAPER LEVER SET UP, B |
| Парткод: | 1054159 |
| Деталь: | LABEL,HAND POSITION,RIGHT, B |
| Парткод: | 1054160 |
| Деталь: | LABEL,HAND POSITION,LEFT, B |
| Парткод: | 1054161 |
| Деталь: | LABEL,INK MODEL NUMBER,BK, B |
| Парткод: | 1054162 |
| Деталь: | LABEL,INK MODEL NUMBER,C, B |
| Парткод: | 1054163 |
| Деталь: | LABEL,INK MODEL NUMBER,M, B |
| Парткод: | 1054164 |
| Деталь: | LABEL,INK MODEL NUMBER,LC, B |
| Парткод: | 1054165 |
| Деталь: | LABEL,INK MODEL NUMBER,LM, B |
| Парткод: | 1054166 |
| Деталь: | LABEL,INK MODEL NUMBER,Y, B |
| Парткод: | 1054167 |
Коды ошибок
00000100
00000101
00010000
00010001
00010002
00010003
00010004
00010005
00010006
00010007
00010008
00010009
0001000A
0001000B
0001000C
0001000D
0001000E
0001000F
00010010
00020000
00020001
00020002
00020003
0002000B
0100
10020004
10020006
10020009
1002000A
1002000B
100200xx
Описание
| Error code: | 00000100 |
| Display: | SERVICE CALL 00000100:Waste ink tank full |
| Description: | Waste Ink pads must be replaced The waste ink pads are completely full, causing a fatal error. The printer stops printing. |
| Remedy: | Replace the following parts and reset the counters as described below • Waste Ink Pads • F Box • Pump Assembly • Cap Assembly • Cleaner, Head • From Maintenance Mode 2 enter the Counter Init. Menu and initialize the Waste Ink counter and Cleaning counter. |
| Error code: | 00000101 |
| Display: | SERVICE CALL 00000101: CR motor life (Even Ink tube life) |
| Description: | Life end of the CR Motor (includes the Ink Tubes) The number of Carriage movement cycles reached the specified upper limit. • Stylus Pro 7400/7450/7800/7880/7880C: 3,700,000 cycles • Stylus Pro 9400/9450/9800/9880/9880C: 6,300,000 cycles If the printer is used continuously ignoring the error, it may cause the following defective conditions. • The Ink Tubes become cracked causing leakage of ink • Malfunction of the Carriage due to wear of the internal part of the CR Motor |
| Remedy: | 1. Check the life count of the CR Motor Press the [Menu] button - PRINTER STATUS menu - SERVICE LIFE - CR MOTOR. • When the life is still remaining Replace the BOARD ASSY., MAIN • When the life has expired or close to the end-of-life Replace the CR MOTOR ASSY. 2. As the lifespan of the CR Motor means the lifespan of the printer, the whole printer mechanism checks and corresponding maintenance works must be carried out. Especially, the following items should be carefully checked or performed. • Check the Head FFC for any damage such as break, scratch, etc. • Check the CR Timing Belt and the PF Timing Belt for any damage. • Check if abnormal sounds are produced from the sliding surfaces of the Guide Rail and the bearings of the Carriage Unit (wear of the bearings). • Check if the paper dust or any other dust accumulates on the paper path. If it does, clean it as indicated. |
| Error code: | 00010000 |
| Display: | SERVICE CALL 00010000: PF ENCODER CHECK ERROR |
| Description: | PF Encoder check error The printer causes this error and stops operation if it cannot detect the encoder pulse signals at intervals of the specified time during the power-on initialization operation or while the PF Motor is driving. |
| Causes: | • The PF Encoder connector is disconnected. • The PF Motor connector is disconnected. • The Encoder harness on the PF side is broken. • The wiring of the A and B phases are wrong (opposite) • The wiring of the motor is wrong (opposite) • The PF Motor shorted out. • The PF Motor is energized continuously and kept rotating abnormally. • The fuse for the motor driver is blown. (on the Main Board) • The Main Board is damaged. (+42V/+24V remote control is broken) • The Power Supply Board is damaged (42V is OFF). |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Reconnect the PF Encoder connector or the PF Motor connector securely. 3. Execute the PF Timing Belt Tension Adjustment . 4. Replace the PF Encoder Sensor . 5. Replace the PF MOTOR ASSY. . 6. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010001 |
| Display: | SERVICE CALL 00010001: PF MOTOR STEP-OUT |
| Description: | The PF Motor is out-of-step. The printer causes this error and stops operation if it cannot detect the specifiedlength encoder pulse signals within a fixed time period or when abnormally long or short pulse signals are detected while the PF Motor is rotating. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Replace the PF Encoder Sensor . 3. Replace the PF MOTOR ASSY. 4. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010002 |
| Display: | SERVICE CALL 00010002: PF MOTOR OVER CURRENT |
| Description: | Overcurrent occurred on the PF Motor. The printer causes this error and stops operation if an abnormal electric current beyond the prescribed range is detected at the PF Motor drive circuit on the BOARD ASSY.,MAIN while the PF Motor is rotating or when a current beyond the prescribed range is required to be supplied to the motor. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Replace the PF MOTOR ASSY. . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010003 |
| Display: | SERVICE CALL 00010003: PF MOTOR IN POSITION TIME OUT |
| Description: | The PF Motor out of position time-out error The printer causes this error and stops operation if it detects that the paper could not be moved to the target position within a fixed time period while the PF Motor stopping operation. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Execute the PF Timing Belt Tension Adjustment . 3. Replace the PF Encoder Sensor . 4. Replace the PF MOTOR ASSY. 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010004 |
| Display: | SERVICE CALL 00010004: CR ENCODER CHECKING ERROR |
| Description: | CR Encoder check error The printer causes this error and stops operation if it cannot detect the encoder pulse signals at intervals of the specified time during the power-on initialization operation or while the CR Motor is driving. |
| Causes: | • CR Encoder FFC is disconnected. • The CR Motor connector is disconnected. • The FFC of the encoder on the CR side is broken. • The wiring of the A and B phases are wrong (opposite) • The wiring of the CR Motor is wrong (opposite) • The CR Motor shorted out. • The fuse for the motor driver is blown. (on the Main Board) |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Reconnect the CR Encoder FFC or the CR Motor connector securely. 4. Execute the CR Timing Belt Tension Adjustment . 5. Replace the CR Encoder Sensor . 6. Replace the CR MOTOR ASSY. 7. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010005 |
| Display: | SERVICE CALL 00010005: CR MOTOR STEP-OUT |
| Description: | CR Motor is out of step. The printer causes this error and stops operation if it cannot detect the specifiedlength encoder pulse signals within a fixed time period or when abnormally long or short pulse signals are detected while the CR Motor is rotating. |
| Causes: | • The connector of the Cutter Solenoid is disconnected. • The fuse for the Solenoid is blown. (on the Main Board) • CR Motor failure • The CR Motor driver is damage. (42 V is shorted) • The temperature fuse of the Cutter Solenoid is blown (the Cutter Solenoid does not work and the Carriage cannot be unlocked.) |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Reconnect the Cutter Solenoid connector securely and correctly. 4. Execute the CR Timing Belt Tension Adjustment . 5. Replace the CR Encoder Sensor . 6. Replace the CR MOTOR ASSY. . 7. Replace the CUTTER SOLENOID ASSY. . 8. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010006 |
| Display: | SERVICE CALL 00010006: CR MOTOR OVER CURRENT |
| Description: | CR motor overcurrent Feedback from the CR motor (IC33) driver’s 10-pin output (Sense signal) indicates that the CR motor’s current is irregular. |
| Remedy: | • Check the CR cover, slightly loosen screws if necessary • Check the cutter housing, slightly loosen screws if necessary • Make sure no foreign material or ink tubes (from pump assembly) are blocking the carriage path (see “Removing the Maintenance Assembly” on page 143 for reassembly points) • Replace the CR motor • Replace the Main Board |
| Error code: | 00010007 |
| Display: | SERVICE CALL 00010007: CR MOTOR IN POSITION TIME OUT |
| Description: | The CR Motor out of position time-out error The printer causes this error and stops operation if it detects that the Carriage could not be moved to the target position within a fixed time period while the CR Motor stopping operation is performed. |
| Causes: | The Carriage movement cannot be finished due to the remaining pulses smaller than those generated by the motor out-of-step state. |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Execute the CR Timing Belt Tension Adjustment . 4. Replace the CR Encoder Sensor . 5. Replace the CR MOTOR ASSY. . 6. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010008 |
| Display: | SERVICE CALL 00010008: SERVO INTERRUPTION WATCH DOG TIME OUT ERROR |
| Description: | Servo interrupt watchdog time-out error The printer causes this error and stops operation if it detects a watchdog time-out on the DC motor drive circuit (CPU or ASIC) while the CR or PF Motor is driving. |
| Remedy: | CPU or ASIC failure can be considered as the cause of the error, replace the Main Board Assy. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010009 |
| Display: | SERVICE CALL 00010009: SYSTEM INTERRUPTION WATCH DOG TIME OUT ERROR |
| Description: | System interrupt watchdog time-out error The printer causes this error and stops operation if it detects an out-of-control state or cache failure in the CPU or ASIC while the BOARD ASSY.,MAIN is processing a print data. |
| Remedy: | CPU or ASIC failure can be considered as the cause of the error, replace the Main Board Assy. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001000A |
| Display: | SERVICE CALL 0001000A: CR HOME POSITION DETECTION ERROR |
| Description: | Carriage home position detection error The printer causes this error and stops operation if it cannot detect the Carriage home position or cannot detect it within a fixed time period during the power-on initialization operation or while performing home position detecting operation during printing. |
| Remedy: | 1. Clean dirt or foreign materials on the CR HP Sensor and check if it is damaged. 2. Replace the CR HP Sensor . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001000B |
| Description: | PF origin sensor malfunction PF home position sensor malfunction means motor replacement |
| Remedy: | • Check the PF motor and sensor connections • Replace the PF motor (internal sensor) • Replace the Main Board |
| Error code: | 0001000C |
| Display: | SERVICE CALL 0001000C: HEAD SLIDE HOME POSITION DETECTION ERROR |
| Description: | PG home position detection error The printer causes this error and stops operation if it cannot detect the PG home position during the power-on initialization operation or while performing platen gap changing operation after paper is set. |
| Causes: | • The PG HP Sensor connector is disconnected. • The Pump Motor connector is disconnected. • The Pump Motor harness is broken. • PG HP Sensor failure • Pump Motor failure • The PG drive gears are damaged. • The fuse for the motor driver is blown. (on the Main Board) |
| Remedy: | 1. Reconnect the PG HP Sensor connector or the Pump Motor connector securely. 2. Replace the PG HP Sensor . 3. Replace the PUMP CAP ASSY. . |
| Error code: | 0001000D |
| Display: | SERVICE CALL 0001000D: COVER OPEN SENSOR ERROR (00) |
| Description: | Cover sensor malfunction (00) Right sensor (HP side) One or both cover open sensors (interlock switch) located at either end of the cover shaft is malfunctioning. |
| Remedy: | Make sure the sensor(s) are properly installed. If that does not solve the problem, check the cover open sensor connection. If there still is a problem, try the following. • Replace the malfunctioning cover sensor • Replace the Main Board |
| Error code: | 0001000E |
| Display: | SERVICE CALL 0001000E: COVER OPEN SENSOR ERROR (01) |
| Description: | Cover sensor malfunction (01) Left sensor. One or both cover open sensors (interlock switch) located at either end of the cover shaft is malfunctioning. |
| Remedy: | Make sure the sensor(s) are properly installed. If that does not solve the problem, check the cover open sensor connection. If there still is a problem, try the following. • Replace the malfunctioning cover sensor • Replace the Main Board |
| Error code: | 0001000F |
| Display: | SERVICE CALL 0001000F: CRMOTOR OVER HEAT (PWMOUTPUT MALFUNCTION) |
| Description: | CR motor PWM output error |
| Remedy: | • Check the cutter housing, slightly loosen screws if necessary • Replace the Main Board. |
| Error code: | 00010010 |
| Display: | SERVICE CALL 00010010: PF MOTOR OVER HEAT (PWM OUTPUT MALFUNCTION) |
| Description: | PF motor PWM output error |
| Remedy: | • Replace the Main Board |
| Error code: | 00020000 |
| Display: | SERVICE CALL:00020000 (NVRAM ERROR) |
| Description: | NVRAM error The printer causes this error and stops operation when it detects that parameters stored on the NVRAM are corrupted. |
| Causes: | NVRAM erasing or writing error (every 2-byte is checked) |
| Remedy: | Replace the BOARD ASSY., MAIN . |
| Error code: | 00020001 |
| Display: | SERVICE CALL: 00020001 (INTERNALSUM ERROR) |
| Description: | Internal RAM check error |
| Remedy: | • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. |
| Error code: | 00020002 |
| Display: | SERVICE CALL: 00020002 (SDRAM ERROR) |
| Description: | SDRAM error The printer causes this error and stops operation when it detects a bit error by the SDRAM memory check performed during the power-on sequence. |
| Causes: | • SDRAM reading/writing error • SDRAM failure • The address/data bus on the Main Board is broken or its contact is poor. |
| Remedy: | Replace the BOARD ASSY., MAIN . |
| Error code: | 00020003 |
| Display: | SERVICE CALL:00020003 (FLASH MEMORY SUM ERROR) |
| Description: | Boot program sum error The printer causes this error and stops operation when it detects that the boot program of the firmware is corrupted. This error occurs only when turning the power ON. |
| Causes: | • Failed to install the program. • Flash ROM failure • SDRAM failure • The address/data bus on the Main Board is broken or its contact is poor. |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 0002000B |
| Display: | SERVICE CALL 0002000B: MEMORY INSUFFICIENT ERROR |
| Description: | The internal memory is insufficient. This error occurs when the cache area is judged as insufficient. The cache insufficient condition is likely to be caused by using the work area of the memory with unmatched interface mode settings or invalid commands. The printer stops operation when the error occurs. |
| Causes: | Malfunction of the program |
| Remedy: | 1. Check the interface mode setting 2. Installing Firmware 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 0100 |
| Display: | MAINTENANCE CALL 0100 |
| Description: | Backup memory device error |
| Causes: | Defective flash memory. Defective main PWB. |
| Remedy: | EEPROM (main PWB) 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Check that the EEPROM on the main circuit PWB is peroperly installed on the main circuit PWB and, if not, re-install it. 3. Replace the main PWB |
| Error code: | 10020004 |
| Description: | CPU vector 4 - General illegal instruction |
| Remedy: | • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data. |
| Error code: | 10020006 |
| Description: | CPU vector 6 - Slot illegal instruction |
| Remedy: | • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data. |
| Error code: | 10020009 |
| Description: | CPU vector 9 - CPU address error |
| Remedy: | • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data. |
| Error code: | 1002000A |
| Description: | CPU vector 10 - DMAC/DTC address error |
| Remedy: | • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data. |
| Error code: | 1002000B |
| Description: | CPU vector 11 - Watchdog time-out error |
| Remedy: | • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data. |
| Error code: | 100200xx |
| Description: | CPU vector 32 - 63 |
| Remedy: | • Write down the error code, turn the printer off and back on again to confirm whether the error recurs. If the same error recurs, replace the Main Board. • Send a different print job to make sure the error wasn’t due to electrical noise or bad print data. |
Название
EPSON T460 Картридж черный
EPSON T461 Картридж желтый
EPSON T462 Картридж пурпурный
EPSON T463 Картридж голубой
EPSON T464 Картридж светло-пурпурный
EPSON T465 Картридж светло-голубой
EPSON T541 Картридж желтый
EPSON T542 Картридж светло-пурпурный
