Epson Stylus Pro 7400
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
пьезоэлектрическая струйная
Макс. формат
A1
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Цветность печати |
цветная |
Технология печати |
пьезоэлектрическая струйная |
Печать фотографий |
|
Тип |
струйный |
Копир |
|
Телефон |
|
Факс |
|
Сканер |
|
Макс. формат |
A1 |
Тип устройства |
Принтер |
Размещение |
напольный |
Принтер |
|
Пигментные чернила |
|
Печать без полей |
|
Прямая печать |
|
Двусторонняя печать |
|
Количество цветов |
4 |
Мин, объем капли |
3,5 пл |
Макс. ширина рулона |
24 дюйм, (61 см) |
Макс, разрешение для ч/б печати |
|
| По X | 1 440 |
Макс, разрешение для цветной печати |
|
| По Y | 720 |
Расходные материалы |
|
Печать на: |
|
| Этикетках |
|
| CD/DVD |
|
| Конвертах |
|
| Матовой бумаге |
|
| Глянцевой бумаге |
|
| Фотобумаге |
|
| Карточках |
|
| Рулоне |
|
Плотность бумаги |
|
| Максимальная | 1 190 |
Телефон |
|
Стандарт DECT |
|
АОН |
|
Caller ID |
|
Спикерфон |
|
Беспроводная трубка |
|
Автоответчик |
|
Проводная трубка |
|
Языки управления |
|
|
|
|
| PCL 5c |
|
| PCL 5e |
|
| PCL 6 |
|
| PPDS |
|
| PostScript |
|
| PostScript 2 |
|
| PostScript 3 |
|
Лотки |
|
Подача бумаги |
|
| Стандартная | 1 |
Вывод бумаги |
|
| Стандартный | 1 |
Финишер |
|
Брошюровщик |
|
Сортер |
|
Сортировка со сдвигом |
|
Электронная сортировка |
|
Степлер |
|
Интерфейсы |
|
Bluetooth |
|
Устройство для чтения карт памяти |
|
Веб-интерфейс |
|
RS-232 |
|
Инфракрасный порт |
|
Ethernet (RJ-45) |
|
Wi-Fi |
|
LPT |
|
USB |
|
FireWire (IEEE 1394) |
|
Версия USB |
2,0 |
Память/Процессор |
|
Объем памяти |
64 |
Дополнительная информация |
|
Мин. системные требования |
Intel Pentium III |
Поддержка ОС |
|
| Linux |
|
| DOS |
|
| Mac OS |
|
| Windows |
|
Потребляемая мощность |
|
| При работе | 55 |
| В режиме ожидания | 6 |
Габариты |
|
Глубина |
745 |
Ширина |
1 178 |
Вес |
48,9 |
Высота |
1 180 |
Модули
MECH-042
CASE-013JPN
MECH-021
MECH-011
MECH-031
POWE-011
MECH-052
MECH-082
CASE-021
MECH-091
ELEC-021
MECH-072
ELEC-011
MECH-061
Детали ELEC-021
| Деталь: | CR MOTER ASSY. |
| Парткод: | 2105044 |
| Деталь: | CR SCALE SPRING |
| Парткод: | 1413994 |
| Деталь: | SCALE CENTER GUIDE C |
| Парткод: | 1420647 |
| Деталь: | SCALE CR,24 |
| Парткод: | 1420650 |
| Деталь: | FENCE GUIDE R |
| Парткод: | 1251513 |
| Деталь: | CR BELT |
| Парткод: | 1053516 |
| Деталь: | DRIVE ROLLER C ASSY. |
| Парткод: | 1413969 |
| Деталь: | PRESS SPRING |
| Парткод: | 1413989 |
| Деталь: | P REAR SENSOR HOLDER |
| Парткод: | 1413993 |
| Деталь: | BOARD ASSY.,PW |
| Парткод: | 2023967 |
| Деталь: | P REAR FFC |
| Парткод: | 1413964 |
| Деталь: | P THICK2 SENSOR CABLE ASSY. |
| Парткод: | 2105046 |
| Деталь: | P THICK1 SENSOR CABLE ASSY. |
| Парткод: | 2105045 |
| Деталь: | TENSION SPRING |
| Парткод: | 1059710 |
| Деталь: | CR DRIVE PULLEY ASSY.,24 |
| Парткод: | 1414030 |
| Деталь: | PHOTO SENSOR,SG2481 |
| Парткод: | 1413991 |
| Деталь: | PUMP ASSY.,SUPPLY |
| Парткод: | 1305755 |
| Деталь: | TUBE,PRESSURIZING,FULL |
| Парткод: | 1305820 |
| Деталь: | TUBE,PRESSURIZING,24 |
| Парткод: | 1305823 |
| Деталь: | VACUUM FAN ASSY. |
| Парткод: | 2105049 |
| Деталь: | SEAL FAN |
| Парткод: | 1413984 |
| Деталь: | DUCT FAN B |
| Парткод: | 1413983 |
| Деталь: | SEAL HOLD |
| Парткод: | 1413985 |
| Деталь: | POROUS PAD ASSY.,INK EJECT |
| Парткод: | 1402073 |
| Деталь: | BOARD ASSY.,IC |
| Парткод: | 2060507 |
| Деталь: | CONNECTOR,CARTRIDGE,PR |
| Парткод: | 2071647 |
| Деталь: | BOX ASSY.,FLUSHING |
| Парткод: | 1305746 |
| Деталь: | TUBE INK WASTE R |
| Парткод: | 1413986 |
| Деталь: | PAPER GUIDE P,24 |
| Парткод: | 1420649 |
| Деталь: | PAPER GUIDE HOLDER |
| Парткод: | 1420651 |
| Деталь: | VACUUM FAN1 CABLE ASSY. |
| Парткод: | 1413961 |
| Деталь: | VACUUM FAN2 CABLE ASSY. |
| Парткод: | 1413962 |
| Деталь: | HOLDER ASSY.,IC,RIGHT,4C |
| Парткод: | 1305813 |
| Деталь: | INK FFCR ASSY. |
| Парткод: | 1413940 |
| Деталь: | HOLDER ASSY.,IC,LEFT,4C |
| Парткод: | 1305809 |
| Деталь: | INK FFCL ASSY. |
| Парткод: | 1413941 |
| Деталь: | INK CART.BOXED,MBK,PIGT, D38K,110,AS |
| Парткод: | 1418581 |
| Деталь: | INK CART.BOXED,C,PIGT, D38K,110,AS |
| Парткод: | 1418582 |
| Деталь: | INK CART.BXED,M,PIGT, D38K,110,AS |
| Парткод: | 1418583 |
| Деталь: | INK CART.BXED,Y,PIGT, D38K,110,AS |
| Парткод: | 1418584 |
| Деталь: | INK LEAK CHECK JIG |
| Парткод: | 1430064 |
| Деталь: | L SIDE COVER ASSY. |
| Парткод: | 1413943 |
| Деталь: | ROLL TRAY L ASSY. |
| Парткод: | 1112273 |
| Деталь: | ROLL TOP COVER,24 |
| Парткод: | 1414026 |
| Деталь: | H TOP COVER ASSY.,24 |
| Парткод: | 1414025 |
| Деталь: | CATCH |
| Парткод: | 1112256 |
| Деталь: | ROLL TRAY R ASSY. |
| Парткод: | 1112272 |
| Деталь: | UNDULATE WASHER(TOPCOVER) |
| Парткод: | 1112275 |
| Деталь: | DAMPER DISK(TOPCOVER) |
| Парткод: | 1112276 |
| Деталь: | PRSSURE LEVER KNOB |
| Парткод: | 1413944 |
| Деталь: | R SIDE COVER ASSY. |
| Парткод: | 1413942 |
| Деталь: | FRONT COVER ASSY.,24 |
| Парткод: | 1414027 |
| Деталь: | BOARD SHEET STOPPER R |
| Парткод: | 1414005 |
| Деталь: | BOARD SHEET STOPPER L |
| Парткод: | 1414004 |
| Деталь: | I/H COVER R |
| Парткод: | 1413945 |
| Деталь: | KNOB,I/C,LOCK LEVER, C593 |
| Парткод: | 1305019 |
| Деталь: | MIN SIDE LOCK091Y |
| Парткод: | 1043027 |
| Деталь: | I/H COVER R ASSY. |
| Парткод: | 1413947 |
| Деталь: | I/H COVER L ASSY. |
| Парткод: | 1413948 |
| Деталь: | I/H COVER L |
| Парткод: | 1413946 |
| Деталь: | FRONT SENSOR COVER |
| Парткод: | 1413949 |
| Деталь: | COVER,I/F |
| Парткод: | 1232657 |
| Деталь: | GROUND PLATE,IF |
| Парткод: | 1401655 |
| Деталь: | FRONT COVER SPRING R,24 |
| Парткод: | 1414022 |
| Деталь: | FRONT COVER SPRING L,24 |
| Парткод: | 1414024 |
| Деталь: | LOGO PLATE,13X54, G |
| Парткод: | 1305008 |
| Деталь: | LABEL,ROLL PAPER SET,CHANGE |
| Парткод: | 1406021 |
| Деталь: | LABEL,CUT PAPER SET |
| Парткод: | 1406024 |
| Деталь: | LABEL,CUTTER CHANGE1 |
| Парткод: | 1406022 |
| Деталь: | LABEL,ULTORA CHROME INK, B |
| Парткод: | 1419065 |
| Деталь: | LABEL,MODEL NAME, C |
| Парткод: | 1406009 |
| Деталь: | LABEL,PAPER LEVER SET UP |
| Парткод: | 1407937 |
| Деталь: | LABEL,HAND POSITION,24 |
| Парткод: | 1406011 |
| Деталь: | LABEL,CHOKE CLEANING, C |
| Парткод: | 1406015 |
| Деталь: | LABEL,CAUTION,TRANSPORT, C |
| Парткод: | 1406019 |
| Деталь: | BOARD SHEET STOPPER C |
| Парткод: | 1414003 |
| Деталь: | P GUIDE U,24 |
| Парткод: | 1414028 |
| Деталь: | P GUIDE ASSY.,24 |
| Парткод: | 1414029 |
| Деталь: | RUBBER FOOT |
| Парткод: | 1053493 |
| Деталь: | PAPER OUTLET ROLLER ASSY. |
| Парткод: | 1413979 |
| Деталь: | TUBE CLAMP |
| Парткод: | 1413995 |
| Деталь: | TUBE,SUPPLY,INK,11,24 |
| Парткод: | 1305832 |
| Деталь: | TUBE,SUPPLY,INK,12,24 |
| Парткод: | 1305833 |
| Деталь: | TUBE,SUPPLY,INK,14,24 |
| Парткод: | 1305835 |
| Деталь: | TUBE,SUPPLY,INK,13,24 |
| Парткод: | 1305834 |
| Деталь: | TUBE,SUPPLY,INK,15,24 |
| Парткод: | 1305836 |
| Деталь: | TUBE,SUPPLY,INK,16,24 |
| Парткод: | 1305837 |
| Деталь: | TUBE,SUPPLY,INK,17,24 |
| Парткод: | 1305838 |
| Деталь: | TUBE,SUPPLY,INK,18,24 |
| Парткод: | 1305839 |
| Деталь: | TUBE,FILME,STOPPER |
| Парткод: | 1413971 |
| Деталь: | TUBE,FFC,STOPPER |
| Парткод: | 1413970 |
| Деталь: | CR COVER ASSY. |
| Парткод: | 1413968 |
| Деталь: | TUBE FILME,24 |
| Парткод: | 1414032 |
| Деталь: | SUS SUPPORT |
| Парткод: | 1112244 |
| Деталь: | CR FFC2 |
| Парткод: | 1413965 |
| Деталь: | PHOTO SENSOR,SG2481 |
| Парткод: | 1413991 |
| Деталь: | COVER,DUMPER |
| Парткод: | 1305817 |
| Деталь: | HOLDING SPRING,DUMPER |
| Парткод: | 1305819 |
| Деталь: | VALVE ASSY.,HEAD, C,ESL,ASP |
| Парткод: | 1419222 |
| Деталь: | HOLDER,DUMPER |
| Парткод: | 1305815 |
| Деталь: | PG ORG CABLE ASSY. |
| Парткод: | 2105048 |
| Деталь: | CR ORG CABLE ASSY. |
| Парткод: | 2105047 |
| Деталь: | FG CABLE ASSY. |
| Парткод: | 1413966 |
| Деталь: | JOINT SCREWS,M6 |
| Парткод: | 1033482 |
| Деталь: | O RING,TUBE FASTEN |
| Парткод: | 1033483 |
| Деталь: | JOINT,2,L |
| Парткод: | 1305841 |
| Деталь: | CONNECTING SCREW,M7 |
| Парткод: | 1091107 |
| Деталь: | O RING,CONNECTER,M7 |
| Парткод: | 1091108 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | FLAT CRE(SSC-40-12) |
| Парткод: | 1112249 |
| Деталь: | LABEL,CUTTER CHANGE2 |
| Парткод: | 1406023 |
| Деталь: | CARRIAGE ASSY. |
| Парткод: | 1413967 |
| Деталь: | SLIDE GEAR |
| Парткод: | 1053505 |
| Деталь: | HEAD PG SPRING |
| Парткод: | 1414009 |
| Деталь: | H ADJUST SLIDE CORE ARBOR LEVER |
| Парткод: | 1413973 |
| Деталь: | H ADJUST LEVER |
| Парткод: | 1413972 |
| Деталь: | H ADJUST SPRING |
| Парткод: | 1413974 |
| Деталь: | CR ENCODER HOLDER |
| Парткод: | 1413950 |
| Деталь: | INK SENSOR COVER |
| Парткод: | 1413959 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | IM SENSOR FFC |
| Парткод: | 1413957 |
| Деталь: | CUTTER SOLENOID ASSY. |
| Парткод: | 1413955 |
| Деталь: | CR LOCK KICKER |
| Парткод: | 1413976 |
| Деталь: | SOLENOID SPRING |
| Парткод: | 1413975 |
| Деталь: | EDGE SENSOR CABLE ASSY. |
| Парткод: | 1413951 |
| Деталь: | HEAD FFC ASSY. |
| Парткод: | 1413953 |
| Деталь: | PRINT HEAD |
| Парткод: | F160010 |
| Деталь: | POROUS PAD,CR |
| Парткод: | 1264620 |
| Деталь: | HEAD ADJUST LEVER |
| Парткод: | 1414010 |
| Деталь: | TILAP |
| Парткод: | 1063189 |
| Деталь: | LABEL,CUT POSITION |
| Парткод: | 1261387 |
| Деталь: | BOARD ASSY.,ENCODER,CR, B |
| Парткод: | 2105136 |
| Деталь: | PAPER OUTLET ROLLER ASSY. |
| Парткод: | 1413979 |
| Деталь: | TUBE CLAMP |
| Парткод: | 1413995 |
| Деталь: | TUBE,SUPPLY,INK,11,24 |
| Парткод: | 1305832 |
| Деталь: | TUBE,SUPPLY,INK,12,24 |
| Парткод: | 1305833 |
| Деталь: | TUBE,SUPPLY,INK,14,24 |
| Парткод: | 1305835 |
| Деталь: | TUBE,SUPPLY,INK,13,24 |
| Парткод: | 1305834 |
| Деталь: | TUBE,SUPPLY,INK,15,24 |
| Парткод: | 1305836 |
| Деталь: | TUBE,SUPPLY,INK,16,24 |
| Парткод: | 1305837 |
| Деталь: | TUBE,SUPPLY,INK,17,24 |
| Парткод: | 1305838 |
| Деталь: | TUBE,SUPPLY,INK,18,24 |
| Парткод: | 1305839 |
| Деталь: | TUBE,FILME,STOPPER |
| Парткод: | 1413971 |
| Деталь: | TUBE,FFC,STOPPER |
| Парткод: | 1413970 |
| Деталь: | CR COVER ASSY. |
| Парткод: | 1413968 |
| Деталь: | TUBE FILME,24 |
| Парткод: | 1414032 |
| Деталь: | SUS SUPPORT |
| Парткод: | 1112244 |
| Деталь: | CR FFC2 |
| Парткод: | 1413965 |
| Деталь: | PHOTO SENSOR,SG2481 |
| Парткод: | 1413991 |
| Деталь: | COVER,DUMPER |
| Парткод: | 1305817 |
| Деталь: | HOLDING SPRING,DUMPER |
| Парткод: | 1305819 |
| Деталь: | VALVE ASSY.,HEAD, C,ESL,ASP |
| Парткод: | 1419222 |
| Деталь: | HOLDER,DUMPER |
| Парткод: | 1305815 |
| Деталь: | PG ORG CABLE ASSY. |
| Парткод: | 2105048 |
| Деталь: | CR ORG CABLE ASSY. |
| Парткод: | 2105047 |
| Деталь: | FG CABLE ASSY. |
| Парткод: | 1413966 |
| Деталь: | JOINT SCREWS,M6 |
| Парткод: | 1033482 |
| Деталь: | O RING,TUBE FASTEN |
| Парткод: | 1033483 |
| Деталь: | JOINT,2,L |
| Парткод: | 1305841 |
| Деталь: | CONNECTING SCREW,M7 |
| Парткод: | 1091107 |
| Деталь: | O RING,CONNECTER,M7 |
| Парткод: | 1091108 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | FLAT CRE(SSC-40-12) |
| Парткод: | 1112249 |
| Деталь: | LABEL,CUTTER CHANGE2 |
| Парткод: | 1406023 |
| Деталь: | CARRIAGE ASSY. |
| Парткод: | 1413967 |
| Деталь: | SLIDE GEAR |
| Парткод: | 1053505 |
| Деталь: | HEAD PG SPRING |
| Парткод: | 1414009 |
| Деталь: | H ADJUST SLIDE CORE ARBOR LEVER |
| Парткод: | 1413973 |
| Деталь: | H ADJUST LEVER |
| Парткод: | 1413972 |
| Деталь: | H ADJUST SPRING |
| Парткод: | 1413974 |
| Деталь: | CR ENCODER HOLDER |
| Парткод: | 1413950 |
| Деталь: | INK SENSOR COVER |
| Парткод: | 1413959 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | IM SENSOR FFC |
| Парткод: | 1413957 |
| Деталь: | CUTTER SOLENOID ASSY. |
| Парткод: | 1413955 |
| Деталь: | CR LOCK KICKER |
| Парткод: | 1413976 |
| Деталь: | SOLENOID SPRING |
| Парткод: | 1413975 |
| Деталь: | EDGE SENSOR CABLE ASSY. |
| Парткод: | 1413951 |
| Деталь: | HEAD FFC ASSY. |
| Парткод: | 1413953 |
| Деталь: | PRINT HEAD |
| Парткод: | F160010 |
| Деталь: | POROUS PAD,CR |
| Парткод: | 1264620 |
| Деталь: | HEAD ADJUST LEVER |
| Парткод: | 1414010 |
| Деталь: | TILAP |
| Парткод: | 1063189 |
| Деталь: | LABEL,CUT POSITION |
| Парткод: | 1261387 |
| Деталь: | BOARD ASSY.,ENCODER,CR, B |
| Парткод: | 2105136 |
| Деталь: | CR MOTER ASSY. |
| Парткод: | 2105044 |
| Деталь: | CR SCALE SPRING |
| Парткод: | 1413994 |
| Деталь: | SCALE CENTER GUIDE C |
| Парткод: | 1420647 |
| Деталь: | SCALE CR,24 |
| Парткод: | 1420650 |
| Деталь: | FENCE GUIDE R |
| Парткод: | 1251513 |
| Деталь: | CR BELT |
| Парткод: | 1053516 |
| Деталь: | DRIVE ROLLER C ASSY. |
| Парткод: | 1413969 |
| Деталь: | PRESS SPRING |
| Парткод: | 1413989 |
| Деталь: | P REAR SENSOR HOLDER |
| Парткод: | 1413993 |
| Деталь: | BOARD ASSY.,PW |
| Парткод: | 2023967 |
| Деталь: | P REAR FFC |
| Парткод: | 1413964 |
| Деталь: | P THICK2 SENSOR CABLE ASSY. |
| Парткод: | 2105046 |
| Деталь: | P THICK1 SENSOR CABLE ASSY. |
| Парткод: | 2105045 |
| Деталь: | TENSION SPRING |
| Парткод: | 1059710 |
| Деталь: | CR DRIVE PULLEY ASSY.,24 |
| Парткод: | 1414030 |
| Деталь: | PHOTO SENSOR,SG2481 |
| Парткод: | 1413991 |
| Деталь: | PUMP ASSY.,SUPPLY |
| Парткод: | 1305755 |
| Деталь: | TUBE,PRESSURIZING,FULL |
| Парткод: | 1305820 |
| Деталь: | TUBE,PRESSURIZING,24 |
| Парткод: | 1305823 |
| Деталь: | VACUUM FAN ASSY. |
| Парткод: | 2105049 |
| Деталь: | SEAL FAN |
| Парткод: | 1413984 |
| Деталь: | DUCT FAN B |
| Парткод: | 1413983 |
| Деталь: | SEAL HOLD |
| Парткод: | 1413985 |
| Деталь: | POROUS PAD ASSY.,INK EJECT |
| Парткод: | 1402073 |
| Деталь: | BOARD ASSY.,IC |
| Парткод: | 2060507 |
| Деталь: | CONNECTOR,CARTRIDGE,PR |
| Парткод: | 2071647 |
| Деталь: | BOX ASSY.,FLUSHING |
| Парткод: | 1305746 |
| Деталь: | TUBE INK WASTE R |
| Парткод: | 1413986 |
| Деталь: | PAPER GUIDE P,24 |
| Парткод: | 1420649 |
| Деталь: | PAPER GUIDE HOLDER |
| Парткод: | 1420651 |
| Деталь: | VACUUM FAN1 CABLE ASSY. |
| Парткод: | 1413961 |
| Деталь: | VACUUM FAN2 CABLE ASSY. |
| Парткод: | 1413962 |
| Деталь: | HOLDER ASSY.,IC,RIGHT,4C |
| Парткод: | 1305813 |
| Деталь: | INK FFCR ASSY. |
| Парткод: | 1413940 |
| Деталь: | HOLDER ASSY.,IC,LEFT,4C |
| Парткод: | 1305809 |
| Деталь: | INK FFCL ASSY. |
| Парткод: | 1413941 |
| Деталь: | CUTTER POSITION JIG |
| Парткод: | 1424366 |
| Деталь: | SUPER MULTI OIL 32 |
| Парткод: | 1432563 |
| Деталь: | CLEANING CART.BOXED, D38C,AS |
| Парткод: | 1404261 |
| Деталь: | KIMOTO MICRO TRACE300, A-3 |
| Парткод: | 1057723 |
| Деталь: | TENSION GAUGE 40N |
| Парткод: | 1060744 |
| Деталь: | GREASE G-26 (40GR)(B702600001) |
| Парткод: | 1080614 |
| Деталь: | TENSION GAUGE(10N) |
| Парткод: | 1401952 |
| Деталь: | P-THICK SENSOR POSITION JIG |
| Парткод: | 1424364 |
| Деталь: | INK MARK SENSOR POSITION JIG |
| Парткод: | 1424365 |
| Деталь: | P/S BORAD ASSY. |
| Парткод: | 2105035 |
| Деталь: | DC CABLE ASSY. |
| Парткод: | 2105036 |
| Деталь: | INLET ASSY. |
| Парткод: | 2105037 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1063145 |
| Деталь: | HEXAGON STUD,M3X8 |
| Парткод: | 1413981 |
| Деталь: | POROUS PAD,SUB PLATEN BASE,A |
| Парткод: | 1419353 |
| Деталь: | PCB COVER |
| Парткод: | 1414001 |
| Деталь: | TERM R FFC |
| Парткод: | 1413958 |
| Деталь: | INK FFC2 |
| Парткод: | 1413960 |
| Деталь: | PUMP PHASE CABLE ASSY. |
| Парткод: | 2105042 |
| Деталь: | PANEL FFC |
| Парткод: | 2105038 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | FLAT CLAMP,FCR-35 |
| Парткод: | 1414002 |
| Деталь: | FLAT CORE(SSC-40-12) |
| Парткод: | 1112249 |
| Деталь: | FLAT CORE HOLDER |
| Парткод: | 1413980 |
| Деталь: | TERM L EEC1 |
| Парткод: | 1414031 |
| Деталь: | CR MOTER CABLE 1 ASSY. |
| Парткод: | 2105051 |
| Деталь: | PF MOTER CABLE 1 ASSY. |
| Парткод: | 2105053 |
| Деталь: | PRESS POS CABLE ASSY. |
| Парткод: | 2105040 |
| Деталь: | F COVER CABLE ASSY. |
| Парткод: | 2105041 |
| Деталь: | PF ENC CABLE ASSY. |
| Парткод: | 2105039 |
| Деталь: | FLAT CLAMP(FCR-30-V0) |
| Парткод: | 1112254 |
| Деталь: | FLAT CLAMP,FCR-15 V0 |
| Парткод: | 1234048 |
| Деталь: | PUMP CAP ASSY. |
| Парткод: | 1305717 |
| Деталь: | CLEANER,HEAD,A,ASP |
| Парткод: | 1407807 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | FLAT CLAMP(FCR-30-V0) |
| Парткод: | 1112254 |
| Деталь: | FLAT CORE(SSC-40-12) |
| Парткод: | 1112249 |
| Деталь: | FLAT CORE HOLDER |
| Парткод: | 1413980 |
| Деталь: | PG REDUCTION GEAR,17,39 |
| Парткод: | 1413977 |
| Деталь: | PG IDLE GEAR A |
| Парткод: | 1053531 |
| Деталь: | PG IDLE GEAR B |
| Парткод: | 1053532 |
| Деталь: | PRESS LEVER |
| Парткод: | 1413956 |
| Деталь: | PG CONNECT GEAR,40 |
| Парткод: | 1413978 |
| Деталь: | POROUS PAD,NK EJECT,TRAY |
| Парткод: | 1417240 |
| Деталь: | PF MOTER ASSY.,24 |
| Парткод: | 2105034 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 2035504 |
| Деталь: | PF ENC COVER B |
| Парткод: | 1420653 |
| Деталь: | SCALE,PF |
| Парткод: | 1305846 |
| Деталь: | X REDUCTION BELT |
| Парткод: | 1113629 |
| Деталь: | POROUS PAD |
| Парткод: | 1413982 |
| Деталь: | KIMOTO MICRO TRACE300, A-3 |
| Парткод: | 1057723 |
| Деталь: | TENSION GAUGE 40N |
| Парткод: | 1060744 |
| Деталь: | GREASE G-26 (40GR)(B702600001) |
| Парткод: | 1080614 |
| Деталь: | TENSION GAUGE(10N) |
| Парткод: | 1401952 |
| Деталь: | P-THICK SENSOR POSITION JIG |
| Парткод: | 1424364 |
| Деталь: | INK MARK SENSOR POSITION JIG |
| Парткод: | 1424365 |
| Деталь: | CUTTER POSITION JIG |
| Парткод: | 1424366 |
| Деталь: | SUPER MULTI OIL 32 |
| Парткод: | 1432563 |
| Деталь: | CLEANING CART.BOXED, D38C,AS |
| Парткод: | 1404261 |
| Деталь: | L SIDE COVER ASSY. |
| Парткод: | 1413943 |
| Деталь: | ROLL TRAY L ASSY. |
| Парткод: | 1112273 |
| Деталь: | ROLL TOP COVER,24 |
| Парткод: | 1414026 |
| Деталь: | H TOP COVER ASSY.,24 |
| Парткод: | 1414025 |
| Деталь: | CATCH |
| Парткод: | 1112256 |
| Деталь: | ROLL TRAY R ASSY. |
| Парткод: | 1112272 |
| Деталь: | UNDULATE WASHER(TOPCOVER) |
| Парткод: | 1112275 |
| Деталь: | DAMPER DISK(TOPCOVER) |
| Парткод: | 1112276 |
| Деталь: | PRSSURE LEVER KNOB |
| Парткод: | 1413944 |
| Деталь: | R SIDE COVER ASSY. |
| Парткод: | 1413942 |
| Деталь: | FRONT COVER ASSY.,24 |
| Парткод: | 1414027 |
| Деталь: | BOARD SHEET STOPPER R |
| Парткод: | 1414005 |
| Деталь: | BOARD SHEET STOPPER L |
| Парткод: | 1414004 |
| Деталь: | I/H COVER R |
| Парткод: | 1413945 |
| Деталь: | KNOB,I/C,LOCK LEVER, C593 |
| Парткод: | 1305019 |
| Деталь: | MIN SIDE LOCK091Y |
| Парткод: | 1043027 |
| Деталь: | I/H COVER R ASSY. |
| Парткод: | 1413947 |
| Деталь: | I/H COVER L ASSY. |
| Парткод: | 1413948 |
| Деталь: | I/H COVER L |
| Парткод: | 1413946 |
| Деталь: | FRONT SENSOR COVER |
| Парткод: | 1413949 |
| Деталь: | COVER,I/F |
| Парткод: | 1232657 |
| Деталь: | GROUND PLATE,IF |
| Парткод: | 1401655 |
| Деталь: | FRONT COVER SPRING R,24 |
| Парткод: | 1414022 |
| Деталь: | FRONT COVER SPRING L,24 |
| Парткод: | 1414024 |
| Деталь: | LOGO PLATE,13X54, G |
| Парткод: | 1305008 |
| Деталь: | LABEL,ROLL PAPER SET,CHANGE |
| Парткод: | 1406021 |
| Деталь: | LABEL,CUT PAPER SET |
| Парткод: | 1406024 |
| Деталь: | LABEL,CUTTER CHANGE1 |
| Парткод: | 1406022 |
| Деталь: | LABEL,ULTORA CHROME INK, B |
| Парткод: | 1419065 |
| Деталь: | LABEL,MODEL NAME, C |
| Парткод: | 1406009 |
| Деталь: | LABEL,PAPER LEVER SET UP |
| Парткод: | 1407937 |
| Деталь: | LABEL,HAND POSITION,24 |
| Парткод: | 1406011 |
| Деталь: | LABEL,CHOKE CLEANING, C |
| Парткод: | 1406015 |
| Деталь: | LABEL,CAUTION,TRANSPORT, C |
| Парткод: | 1406019 |
| Деталь: | BOARD SHEET STOPPER C |
| Парткод: | 1414003 |
| Деталь: | P GUIDE U,24 |
| Парткод: | 1414028 |
| Деталь: | P GUIDE ASSY.,24 |
| Парткод: | 1414029 |
| Деталь: | RUBBER FOOT |
| Парткод: | 1053493 |
| Деталь: | CR STOPPER ASSY. |
| Парткод: | 1413938 |
| Деталь: | FLANGE,LEFT |
| Парткод: | 1412711 |
| Деталь: | ADAPTER |
| Парткод: | 1104332 |
| Деталь: | ROLL SHAFT |
| Парткод: | 1112285 |
| Деталь: | E-RING,3,F/UC-3C |
| Парткод: | 1283663 |
| Деталь: | STOPPER SHAFT |
| Парткод: | 1112286 |
| Деталь: | FLANGE,RIGHT |
| Парткод: | 1104330 |
| Деталь: | LABEL,ROLLPAPER SET,2/3 INCH |
| Парткод: | 1104833 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2093624 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2093628 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2093630 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2093626 |
| Деталь: | PANEL ASSY. |
| Парткод: | 2105033 |
| Деталь: | PUMP CAP ASSY. |
| Парткод: | 1305717 |
| Деталь: | CLEANER,HEAD,A,ASP |
| Парткод: | 1407807 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | FLAT CLAMP(FCR-30-V0) |
| Парткод: | 1112254 |
| Деталь: | FLAT CORE(SSC-40-12) |
| Парткод: | 1112249 |
| Деталь: | FLAT CORE HOLDER |
| Парткод: | 1413980 |
| Деталь: | PG REDUCTION GEAR,17,39 |
| Парткод: | 1413977 |
| Деталь: | PG IDLE GEAR A |
| Парткод: | 1053531 |
| Деталь: | PG IDLE GEAR B |
| Парткод: | 1053532 |
| Деталь: | PRESS LEVER |
| Парткод: | 1413956 |
| Деталь: | PG CONNECT GEAR,40 |
| Парткод: | 1413978 |
| Деталь: | POROUS PAD,NK EJECT,TRAY |
| Парткод: | 1417240 |
| Деталь: | PF MOTER ASSY.,24 |
| Парткод: | 2105034 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 2035504 |
| Деталь: | PF ENC COVER B |
| Парткод: | 1420653 |
| Деталь: | SCALE,PF |
| Парткод: | 1305846 |
| Деталь: | X REDUCTION BELT |
| Парткод: | 1113629 |
| Деталь: | POROUS PAD |
| Парткод: | 1413982 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2093624 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2093628 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2093630 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2093626 |
| Деталь: | PANEL ASSY. |
| Парткод: | 2105033 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1063145 |
| Деталь: | HEXAGON STUD,M3X8 |
| Парткод: | 1413981 |
| Деталь: | POROUS PAD,SUB PLATEN BASE,A |
| Парткод: | 1419353 |
| Деталь: | PCB COVER |
| Парткод: | 1414001 |
| Деталь: | TERM R FFC |
| Парткод: | 1413958 |
| Деталь: | INK FFC2 |
| Парткод: | 1413960 |
| Деталь: | PUMP PHASE CABLE ASSY. |
| Парткод: | 2105042 |
| Деталь: | PANEL FFC |
| Парткод: | 2105038 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | FLAT CLAMP,FCR-35 |
| Парткод: | 1414002 |
| Деталь: | FLAT CORE(SSC-40-12) |
| Парткод: | 1112249 |
| Деталь: | FLAT CORE HOLDER |
| Парткод: | 1413980 |
| Деталь: | TERM L EEC1 |
| Парткод: | 1414031 |
| Деталь: | CR MOTER CABLE 1 ASSY. |
| Парткод: | 2105051 |
| Деталь: | PF MOTER CABLE 1 ASSY. |
| Парткод: | 2105053 |
| Деталь: | PRESS POS CABLE ASSY. |
| Парткод: | 2105040 |
| Деталь: | F COVER CABLE ASSY. |
| Парткод: | 2105041 |
| Деталь: | PF ENC CABLE ASSY. |
| Парткод: | 2105039 |
| Деталь: | FLAT CLAMP(FCR-30-V0) |
| Парткод: | 1112254 |
| Деталь: | FLAT CLAMP,FCR-15 V0 |
| Парткод: | 1234048 |
Коды ошибок
00000101
00010000
00010001
00010002
00010003
00010004
00010005
00010007
00010008
00010009
0001000A
0001000C
00010014
0001001B
0001001D
0001001E
00010020
00010023
00010026
00010027
00010028
0001002A
0001002D
00010035
00010036
00010037
00010038
0001003E
0001003F
00010040
00020000
00020002
00020003
0002000A
0002000B
0DXXXXXX
0EXXXXXX
100000E0
10000100
10000180
100001A0
100001C0
100005C0
10000XXX
Описание
| Error code: | 00000101 |
| Display: | SERVICE CALL 00000101: CR motor life (Even Ink tube life) |
| Description: | Life end of the CR Motor (includes the Ink Tubes) The number of Carriage movement cycles reached the specified upper limit. • Stylus Pro 7400/7450/7800/7880/7880C: 3,700,000 cycles • Stylus Pro 9400/9450/9800/9880/9880C: 6,300,000 cycles If the printer is used continuously ignoring the error, it may cause the following defective conditions. • The Ink Tubes become cracked causing leakage of ink • Malfunction of the Carriage due to wear of the internal part of the CR Motor |
| Remedy: | 1. Check the life count of the CR Motor Press the [Menu] button - PRINTER STATUS menu - SERVICE LIFE - CR MOTOR. • When the life is still remaining Replace the BOARD ASSY., MAIN • When the life has expired or close to the end-of-life Replace the CR MOTOR ASSY. 2. As the lifespan of the CR Motor means the lifespan of the printer, the whole printer mechanism checks and corresponding maintenance works must be carried out. Especially, the following items should be carefully checked or performed. • Check the Head FFC for any damage such as break, scratch, etc. • Check the CR Timing Belt and the PF Timing Belt for any damage. • Check if abnormal sounds are produced from the sliding surfaces of the Guide Rail and the bearings of the Carriage Unit (wear of the bearings). • Check if the paper dust or any other dust accumulates on the paper path. If it does, clean it as indicated. |
| Error code: | 00010000 |
| Display: | SERVICE CALL 00010000: PF ENCODER CHECK ERROR |
| Description: | PF Encoder check error The printer causes this error and stops operation if it cannot detect the encoder pulse signals at intervals of the specified time during the power-on initialization operation or while the PF Motor is driving. |
| Causes: | • The PF Encoder connector is disconnected. • The PF Motor connector is disconnected. • The Encoder harness on the PF side is broken. • The wiring of the A and B phases are wrong (opposite) • The wiring of the motor is wrong (opposite) • The PF Motor shorted out. • The PF Motor is energized continuously and kept rotating abnormally. • The fuse for the motor driver is blown. (on the Main Board) • The Main Board is damaged. (+42V/+24V remote control is broken) • The Power Supply Board is damaged (42V is OFF). |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Reconnect the PF Encoder connector or the PF Motor connector securely. 3. Execute the PF Timing Belt Tension Adjustment . 4. Replace the PF Encoder Sensor . 5. Replace the PF MOTOR ASSY. . 6. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010001 |
| Display: | SERVICE CALL 00010001: PF MOTOR STEP-OUT |
| Description: | The PF Motor is out-of-step. The printer causes this error and stops operation if it cannot detect the specifiedlength encoder pulse signals within a fixed time period or when abnormally long or short pulse signals are detected while the PF Motor is rotating. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Replace the PF Encoder Sensor . 3. Replace the PF MOTOR ASSY. 4. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010002 |
| Display: | SERVICE CALL 00010002: PF MOTOR OVER CURRENT |
| Description: | Overcurrent occurred on the PF Motor. The printer causes this error and stops operation if an abnormal electric current beyond the prescribed range is detected at the PF Motor drive circuit on the BOARD ASSY.,MAIN while the PF Motor is rotating or when a current beyond the prescribed range is required to be supplied to the motor. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Replace the PF MOTOR ASSY. . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010003 |
| Display: | SERVICE CALL 00010003: PF MOTOR IN POSITION TIME OUT |
| Description: | The PF Motor out of position time-out error The printer causes this error and stops operation if it detects that the paper could not be moved to the target position within a fixed time period while the PF Motor stopping operation. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Execute the PF Timing Belt Tension Adjustment . 3. Replace the PF Encoder Sensor . 4. Replace the PF MOTOR ASSY. 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010004 |
| Display: | SERVICE CALL 00010004: CR ENCODER CHECKING ERROR |
| Description: | CR Encoder check error The printer causes this error and stops operation if it cannot detect the encoder pulse signals at intervals of the specified time during the power-on initialization operation or while the CR Motor is driving. |
| Causes: | • CR Encoder FFC is disconnected. • The CR Motor connector is disconnected. • The FFC of the encoder on the CR side is broken. • The wiring of the A and B phases are wrong (opposite) • The wiring of the CR Motor is wrong (opposite) • The CR Motor shorted out. • The fuse for the motor driver is blown. (on the Main Board) |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Reconnect the CR Encoder FFC or the CR Motor connector securely. 4. Execute the CR Timing Belt Tension Adjustment . 5. Replace the CR Encoder Sensor . 6. Replace the CR MOTOR ASSY. 7. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010005 |
| Display: | SERVICE CALL 00010005: CR MOTOR STEP-OUT |
| Description: | CR Motor is out of step. The printer causes this error and stops operation if it cannot detect the specifiedlength encoder pulse signals within a fixed time period or when abnormally long or short pulse signals are detected while the CR Motor is rotating. |
| Causes: | • The connector of the Cutter Solenoid is disconnected. • The fuse for the Solenoid is blown. (on the Main Board) • CR Motor failure • The CR Motor driver is damage. (42 V is shorted) • The temperature fuse of the Cutter Solenoid is blown (the Cutter Solenoid does not work and the Carriage cannot be unlocked.) |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Reconnect the Cutter Solenoid connector securely and correctly. 4. Execute the CR Timing Belt Tension Adjustment . 5. Replace the CR Encoder Sensor . 6. Replace the CR MOTOR ASSY. . 7. Replace the CUTTER SOLENOID ASSY. . 8. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010007 |
| Display: | SERVICE CALL 00010007: CR MOTOR IN POSITION TIME OUT |
| Description: | The CR Motor out of position time-out error The printer causes this error and stops operation if it detects that the Carriage could not be moved to the target position within a fixed time period while the CR Motor stopping operation is performed. |
| Causes: | The Carriage movement cannot be finished due to the remaining pulses smaller than those generated by the motor out-of-step state. |
| Remedy: | 1. Reattach the Timing Fence for detecting the encoder securely and correctly. 2. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 3. Execute the CR Timing Belt Tension Adjustment . 4. Replace the CR Encoder Sensor . 5. Replace the CR MOTOR ASSY. . 6. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010008 |
| Display: | SERVICE CALL 00010008: SERVO INTERRUPTION WATCH DOG TIME OUT ERROR |
| Description: | Servo interrupt watchdog time-out error The printer causes this error and stops operation if it detects a watchdog time-out on the DC motor drive circuit (CPU or ASIC) while the CR or PF Motor is driving. |
| Remedy: | CPU or ASIC failure can be considered as the cause of the error, replace the Main Board Assy. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010009 |
| Display: | SERVICE CALL 00010009: SYSTEM INTERRUPTION WATCH DOG TIME OUT ERROR |
| Description: | System interrupt watchdog time-out error The printer causes this error and stops operation if it detects an out-of-control state or cache failure in the CPU or ASIC while the BOARD ASSY.,MAIN is processing a print data. |
| Remedy: | CPU or ASIC failure can be considered as the cause of the error, replace the Main Board Assy. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001000A |
| Display: | SERVICE CALL 0001000A: CR HOME POSITION DETECTION ERROR |
| Description: | Carriage home position detection error The printer causes this error and stops operation if it cannot detect the Carriage home position or cannot detect it within a fixed time period during the power-on initialization operation or while performing home position detecting operation during printing. |
| Remedy: | 1. Clean dirt or foreign materials on the CR HP Sensor and check if it is damaged. 2. Replace the CR HP Sensor . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001000C |
| Display: | SERVICE CALL 0001000C: HEAD SLIDE HOME POSITION DETECTION ERROR |
| Description: | PG home position detection error The printer causes this error and stops operation if it cannot detect the PG home position during the power-on initialization operation or while performing platen gap changing operation after paper is set. |
| Causes: | • The PG HP Sensor connector is disconnected. • The Pump Motor connector is disconnected. • The Pump Motor harness is broken. • PG HP Sensor failure • Pump Motor failure • The PG drive gears are damaged. • The fuse for the motor driver is blown. (on the Main Board) |
| Remedy: | 1. Reconnect the PG HP Sensor connector or the Pump Motor connector securely. 2. Replace the PG HP Sensor . 3. Replace the PUMP CAP ASSY. . |
| Error code: | 00010014 |
| Display: | SERVICE CALL 00010014: PRESSURE DEFECTIVE ERROR |
| Description: | Failure of pressurizing The printer causes this error and stops operation if it detects an abnormal condition of the Pressure Sensor (air leak from the pressurizing mechanism) during the power-on initialization operation or while performing ink supply operation. |
| Causes: | • Pressure Motor failure • The connector of the Pressure Motor, Regulator Solenoid or Pressure Sensor is disconnected. • The harness of the Pressure Motor, Regulator Solenoid or Pressure Sensor is broken. • Regulator Solenoid failure (does not become ON) • Pressure Sensor failure • The Pressure Tube is disconnected. • The fuse for the Solenoid or the motor driver is blown. (on the Main Board) |
| Remedy: | 1. Reconnect the connectors of the Pressure Motor, Regulator Solenoid or Pressure Sensor securely. 2. Connect the Pressure Tube. 3. Replace the PUMP ASSY., SUPPLY . 4. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001001B |
| Display: | SERVICE CALL 0001001B: HEAD DRIVER (TG) TEMPERATURE ERROR |
| Description: | Head driver (TG) temperature error The printer causes this error and stops operation if it detects an abnormal internal temperature of the printhead by the thermistor in the head while performing printing operation without firing ink from the nozzles. |
| Causes: | • The printhead internal temperature rises because of a printing operation without firing ink. • A breakdown of the printhead • Poor contact, short or disconnection of the tape electric wires • Main Board failure. (A/D of the CPU is damaged) |
| Remedy: | 1. Check if the printer can recover from the error by turning it OFF and back ON. 2. Replace the PRINT HEAD . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001001D |
| Display: | SERVICE CALL 0001001D: CR SERVO PARAMETER ERROR |
| Description: | CR servo parameter error The printer causes this error and stops operation when it detects that a voltage beyond the prescribed range is output to the CR Motor. |
| Remedy: | 1. Clean dirt or paper dust on the Timing Fence and check if it is damaged. 2. Execute the CR Timing Belt Tension Adjustment . 3. Replace the CR Encoder Sensor . 4. Replace the CR MOTOR ASSY. . 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001001E |
| Display: | SERVICE CALL 0001001E: PF SERVO PARAMETER ERROR |
| Description: | PF servo parameter error The printer causes this error and stops operation when it detects that a voltage beyond the prescribed range is output to the PF Motor. |
| Remedy: | 1. Clean dirt or paper dust on the Loop Scale and check if it is damaged. 2. Execute the PF Timing Belt Tension Adjustment . 3. Replace the PF Encoder Sensor . 4. Replace the PF MOTOR ASSY. . 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010020 |
| Display: | SERVICE CALL 00010020: CSIC READ INFORMATION ERROR |
| Description: | CSIC reading/writing error The printer causes this error and stops operation if it cannot load the information from the CSIC or write new information on the CSIC while running a power-ON/ OFF sequence or opening/closing the I/C Cover, or after finishing to print one page. |
| Remedy: | 1. Reconnect the CSIC FFC. 2. The memory chip on the ink cartridge is defective. (replace the ink cartridge) 3. Poor contact with the memory chip. • Replace the HOLDER ASSY., IC, RIGHT . • Replace the HOLDER ASSY., IC, LEFT . 4. Replace the BOARD ASSY., SUB; B ., Replace the BOARD ASSY., SUB; C . 5. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010023 |
| Description: | RTC analyzing error The printer causes this error and stops operation when it detects that the absolute date and time stored on the NVRAM is incorrect. |
| Remedy: | 1. Start up the printer in the Serviceman mode, and correct the date and time setting using the “RTC & USB ID & IEEE1394 ID” Basic Adjustment menu provided in the Adjustment Program. 2. Remove and reinstall the lithium battery. 3. Replace the lithium battery. Be sure to perform the RTC setting. 4. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010026 |
| Description: | RTC communication error The printer causes this error and stops operation when it detects that the RTC circuit on the BOARD ASSY.,MAIN malfunctions (operates in test mode). |
| Remedy: | 1. Turns the printer OFF and remove the lithium battery. Leave the printer for a few seconds and then reinsert the battery and turn the printer ON. 2. Repeat Step 1 until the printer stops causing the error at power-on. 3. Start up the printer in the Serviceman mode, and set the date and time using the “RTC & USB ID & IEEE1394 ID” Basic Adjustment menu provided in the Adjustment Program. |
| Error code: | 00010027 |
| Description: | Pressure pump micro air-leak error The printer causes the error and stops operation if the Pressure Sensor becomes “LOW” state while performing a inspection of the Pressure Motor by “1.4.6.1 Self Testing Menu (SELF TESTING)” . This error occurs only when the printer is in the SELF TESTING mode. If a micro air leak from the Pressure Motor is suspected because the motor works frequently or constantly, the SELF TESTING function allows you to check it for micro air leak before the printer causes a Service Call 00010014 for leakage of air. |
| Causes: | • Micro air leak from the Pressure Motor. • The Pressure Tube is disconnected. • The pressure inside the pressurizing mechanism dropped within 90 seconds after finishing the last pressurizing operation. |
| Remedy: | 1. Connect the Pressure Tube. 2. Replace the PUMP ASSY., SUPPLY . |
| Error code: | 00010028 |
| Description: | Head error The printer causes this error and stops operation when it detects an undefined NMI in the CPU or the printhead is damaged. |
| Remedy: | Replace the PRINT HEAD . |
| Error code: | 0001002A |
| Description: | CR ASIC ECU error • Malfunction of the firmware (invalid rewriting of the register) • The Main Board is damaged. |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001002D |
| Description: | The Cleaning Unit reached its end of life. The pump counter reached the prescribed upper limit (182,000P). |
| Remedy: | Replace the Cleaning Unit and reset the life counter of the unit using the Adjustment Program. |
| Error code: | 00010035 |
| Description: | Pump phase detection error |
| Causes: | A position of the pump cannot be detected after the Pump Motor rotates the prescribed number of times, or the Pump Phase Sensor is faulty. Or the fuse for the motor driver power is blown (on the Main Board). |
| Remedy: | Check if the printer can recover from the error by turning it OFF and back ON. If the error occurs again, replace the Pump Cap Assy. or replace the Main Board Assy. .. Replace the PUMP CAP ASSY. . .. Replace the BOARD ASSY., MAIN . |
| Error code: | 00010036 |
| Description: | Type-B board installation error |
| Causes: | A Type-B board lower than level 2 is installed. |
| Remedy: | Remove the installed Type-B board. |
| Error code: | 00010037 |
| Description: | Head thermistor error |
| Causes: | • The head thermistor is faulty. • The temperature of the thermistor is lower than minus 20 degrees C or higher than 100 degrees C. • The Head FFC is disconnected, or its contact is poor. |
| Remedy: | 1. Check the connection status of the Head FFC and correct it if necessary. 2. Replace the PRINT HEAD . |
| Error code: | 00010038 |
| Description: | Transistor thermistor error |
| Causes: | • The transistor thermistor is faulty. • The temperature of the thermistor is lower than minus 20 degrees C or higher than 100 degrees C. |
| Remedy: | Replace the BOARD ASSY., MAIN . |
| Error code: | 0001003E |
| Description: | Pressure Sensor failure |
| Causes: | • The Pressure Sensor is ON when an ink pressurizing operation is not performed. (disconnection of the Pressure Sensor connector, malfunction of the Pressure Sensor, or Main Board failure) • The inside pressure cannot be reduced to the same level as atmospheric pressure. (valve failure, Regulator Solenoid failure, Pressure Tube failure, or Main Board failure) |
| Remedy: | 1. Reconnect the Pressure Sensor connector securely. 2. Connect the Pressure Tube. 3. Replace the PUMP ASSY., SUPPLY . 4. Replace the BOARD ASSY., MAIN . |
| Error code: | 0001003F |
| Description: | The Pressure Motor reached its end of life. |
| Causes: | The cumulative number of steps of the Pressure Motor reached the prescribed upper limit |
| Remedy: | Replace the PUMP ASSY., SUPPLY ., and reset the life counter of the Pressure Pump Unit using the Adjustment Program. |
| Error code: | 00010040 |
| Description: | Printing position error |
| Causes: | • Exact detection of printing positions is impossible due to dirt or scratches on the Timing Fence or the CR Encoder. • Malfunction of the program |
| Remedy: | 1. Replace the SCALE, CR . 2. Replace the CR Encoder Sensor . 3. Execute the CR Encoder Sensor Adjustment . 4. Installing Firmware |
| Error code: | 00020000 |
| Display: | SERVICE CALL:00020000 (NVRAM ERROR) |
| Description: | NVRAM error The printer causes this error and stops operation when it detects that parameters stored on the NVRAM are corrupted. |
| Causes: | NVRAM erasing or writing error (every 2-byte is checked) |
| Remedy: | Replace the BOARD ASSY., MAIN . |
| Error code: | 00020002 |
| Display: | SERVICE CALL: 00020002 (SDRAM ERROR) |
| Description: | SDRAM error The printer causes this error and stops operation when it detects a bit error by the SDRAM memory check performed during the power-on sequence. |
| Causes: | • SDRAM reading/writing error • SDRAM failure • The address/data bus on the Main Board is broken or its contact is poor. |
| Remedy: | Replace the BOARD ASSY., MAIN . |
| Error code: | 00020003 |
| Display: | SERVICE CALL:00020003 (FLASH MEMORY SUM ERROR) |
| Description: | Boot program sum error The printer causes this error and stops operation when it detects that the boot program of the firmware is corrupted. This error occurs only when turning the power ON. |
| Causes: | • Failed to install the program. • Flash ROM failure • SDRAM failure • The address/data bus on the Main Board is broken or its contact is poor. |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 0002000A |
| Description: | Program load error A sum check error on the program area of the RAM |
| Causes: | • Malfunction of the program • SDRAM failure • The address/data bus on the Main Board is broken or its contact is poor. |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 0002000B |
| Display: | SERVICE CALL 0002000B: MEMORY INSUFFICIENT ERROR |
| Description: | The internal memory is insufficient. This error occurs when the cache area is judged as insufficient. The cache insufficient condition is likely to be caused by using the work area of the memory with unmatched interface mode settings or invalid commands. The printer stops operation when the error occurs. |
| Causes: | Malfunction of the program |
| Remedy: | 1. Check the interface mode setting 2. Installing Firmware 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 0DXXXXXX |
| Description: | An error code for debugging |
| Causes: | • Board failure • SDRAM failure • Cold soldering of the Flash ROM, ASIC, or CPU. • Malfunction of the program • Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 0EXXXXXX |
| Description: | A time-lag of the RTC timer This error occurs when the printer failed to communicate with the RTC chip on the Main Board. • 0Exxyyzz: xx = Location where a compare error occurred (00 = LTMR1, 01 = LTMR0, 02 = MIN counter) yy = Setting value (writing value) zz = Setting result (a value read when comparing) |
| Remedy: | Start up the printer in the Serviceman mode, and set the date and time setting using the “RTC & USB ID & IEEE1394 ID” Basic Adjustment menu provided in the Adjustment Program. |
| Error code: | 100000E0 |
| Display: | SERVICE CALL 100000E0 : CPU ADDRESS ERROR |
| Description: | CPU address error (misalignment of loading) |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 10000100 |
| Display: | SERVICE CALL 10000100 : CPU ADDRESS ERROR |
| Description: | CPU address error (misalignment of storing) |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 10000180 |
| Display: | SERVICE CALL 10000180 : CPU RESERVATION INSTRUCTION CODE EXCEPTION ERROR |
| Description: | CPU reserved command code exception error |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 100001A0 |
| Display: | SERVICE CALL 100001A0 : CPU SLOT UNFAIR COMMAND EXCEPTION ERROR |
| Description: | CPU slot undefined command exception error |
| Causes: | • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 100001C0 |
| Description: | The AC power is shut off. |
| Causes: | • A power failure • The power code is disconnected. • Power Supply Board failure • Main Board failure • The CPU detected NMI with “1” indicated for the NMIINO of the ASIC. |
| Remedy: | 1. Turn the printer OFF to reconnect the power code and turn it ON. 2. Replace the P/S BOARD ASSY. . 3. Replace the BOARD ASSY., MAIN . |
| Error code: | 100005C0 |
| Display: | SERVICE CALL 100005C0 : CPU DMA ADDRESS ERROR |
| Description: | CPU DMA address error |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
| Error code: | 10000XXX |
| Display: | SERVICE CALL 10000XXX : CPU ERROR |
| Description: | CPU error |
| Causes: | • Board failure • CPU cold soldering • Malfunction of the program, Failed to generate commands for the printer |
| Remedy: | 1. Installing Firmware 2. Replace the BOARD ASSY., MAIN . |
Парткод
Название
EPSON T5672 Картридж голубой
EPSON T5673 Картридж пурпурный
EPSON T5674 Картридж желтый
EPSON T5678 Картридж матово-черный
EPSON Емкость для отработанных чернил
EPSON T6118 Картридж матово-черный 110мл. /Matte Black Ink/
EPSON T6122 Картридж голубой
EPSON T6123 Картридж пурпурный
EPSON T6124 Картридж желтый
EPSON T6128 Картридж матово-черный 220мл. /Matte Black Ink/
