Epson Stylus Pro 7910
Рейтинг
Модули
CASE-015
ACCE-016
ELEC-011
MECH-036
MECH-052
MECH-062
MECH-021
MECH-042
Детали CASE-015
| Деталь: | SHAFT,COVER,IC,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504177 |
| Деталь: | STOPPER,COVER,FRONT |
| Парткод: | 1479991 |
| Деталь: | GROUNDING PLATE,ROLL |
| Парткод: | 1479983 |
| Деталь: | COVER,FRONT,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504186 |
| Деталь: | COVER,FRONT,LEFT,UNIT,ESL,ASP |
| Парткод: | 1504187 |
| Деталь: | COVER ROLL ASSY.,24,ASP |
| Парткод: | 1504256 |
| Деталь: | COVER,IC,RIGHT,UNIT,K,ESL,ASP |
| Парткод: | 1520213 |
| Деталь: | COVER,IC,LEFT,5C |
| Парткод: | 1510993 |
| Деталь: | LABEL,ROLL PAPER SET,PAPER GUIDE LOWER |
| Парткод: | 1496118 |
| Деталь: | COVER,FRONT,24,ASP |
| Парткод: | 1507319 |
| Деталь: | LOGO PLATE,86.5X21.6 |
| Парткод: | 1476652 |
| Деталь: | CATCH,STRIKER |
| Парткод: | 1480012 |
| Деталь: | STRIKER,SENSOR |
| Парткод: | 1480009 |
| Деталь: | COVER,FRONT,RIGHT,ASP |
| Парткод: | 1507312 |
| Деталь: | COVER,FRONT,LEFT,ASP |
| Парткод: | 1507313 |
| Деталь: | COVER,REAR,LEFT,ASP |
| Парткод: | 1507311 |
| Деталь: | COVER,SIDE,ROLL,LEFT |
| Парткод: | 1479986 |
| Деталь: | COVER,SIDE,ROLL,RIGHT |
| Парткод: | 1479985 |
| Деталь: | COVER,TOP,BASE,SUPPORT,RIGHT |
| Парткод: | 1479988 |
| Деталь: | COVER,ROLL,SUPPORT,RIGHT,ASP |
| Парткод: | 1507305 |
| Деталь: | COVER,ROLL,SUPPORT,LEFT.,ASP |
| Парткод: | 1507304 |
| Деталь: | COVER,MAINTENANCE,BOX |
| Парткод: | 1480035 |
| Деталь: | LABEL,ULTRA CHROME INK, VM |
| Парткод: | 1512215 |
| Деталь: | LABEL,MODEL NAME, K |
| Парткод: | 1511767 |
| Деталь: | HANDLE |
| Парткод: | 1480107 |
| Деталь: | COVER,TOP,BASE,24,ASP |
| Парткод: | 1516909 |
| Деталь: | PIPE,BASKET,CENTER,24,ASP |
| Парткод: | 1507323 |
| Деталь: | ARM,BASKET,24,ASP |
| Парткод: | 1507324 |
| Деталь: | BASKET ASSY.,24,ASP |
| Парткод: | 1507321 |
| Деталь: | POWER CABLE |
| Парткод: | 2120141 |
| Деталь: | PAPER GUIDE BOTTOM,ASP |
| Парткод: | 1507815 |
| Деталь: | BOX,MANUAL,ASP |
| Парткод: | 1507307 |
| Деталь: | STAND RIGHT UNIT, B,ASP |
| Парткод: | 1520204 |
| Деталь: | STAND LEFT UNIT, B,ASP |
| Парткод: | 1520205 |
| Деталь: | STAY STAND ASSY.,B,24,ASP |
| Парткод: | 1520220 |
| Деталь: | SHAFT,BASKET,ASSY,ASP |
| Парткод: | 1504195 |
| Деталь: | CASTER,P-60-HT |
| Парткод: | 1499705 |
| Деталь: | CASTER,P-60-HTS |
| Парткод: | 1499706 |
| Деталь: | JOINT,PIPE,BASKET,FRONT,ASP |
| Парткод: | 1507308 |
| Деталь: | PIPE,BASKET,FRONT,SIDE,ASP |
| Парткод: | 1507309 |
| Деталь: | PIPE,BASKET,UPPER,24,ASP |
| Парткод: | 1507322 |
| Деталь: | HOLDER,PIPE,BASKET,FRONT |
| Парткод: | 1481598 |
| Деталь: | HOLDER,PIPE,BASKET,REAR |
| Парткод: | 1481599 |
| Деталь: | PAD,CR, B |
| Парткод: | 5120516 |
| Деталь: | MOUNTING PLATE,PAPER GUIDE,BOTTOM |
| Парткод: | 1480306 |
| Деталь: | SCREW ASSY.,ASP |
| Парткод: | 1514763 |
| Деталь: | STAND,UNIT,24,K,ESL,ASP |
| Парткод: | 1522855 |
| Деталь: | INK CART.BOXED,PBK,PIGT, G65C,110,AS,BU |
| Парткод: | 1506369 |
| Деталь: | INK CART.BOXED,C,PIGT, G65C,110,AS,BU |
| Парткод: | 1506370 |
| Деталь: | INK CART.BOXED,VM,PIGT, G65C,110,AS,BU |
| Парткод: | 1506371 |
| Деталь: | INK CART.BOXED,Y,PIGT, G65C,110,AS,BU |
| Парткод: | 1506372 |
| Деталь: | INK CART.BOXED,MBK,PIGT, G65C,110,AS,BU |
| Парткод: | 1506376 |
| Деталь: | SOFTWARE CD,EN |
| Парткод: | 3104556 |
| Деталь: | SETTING UP MANUAL |
| Парткод: | 4117091 |
| Деталь: | GREASE G-45 |
| Парткод: | 1033657 |
| Деталь: | GREASE G-26 (40GR)(B702600001) |
| Парткод: | 1080614 |
| Деталь: | PAPER THICKNESS POSITION TOOL |
| Парткод: | 1282355 |
| Деталь: | SONIC TENSION METER U507 |
| Парткод: | 1294120 |
| Деталь: | GREASE G-74 |
| Парткод: | 1409257 |
| Деталь: | P-THICK SENSOR POSITION JIG |
| Парткод: | 1424364 |
| Деталь: | JETRAS JP-D300S |
| Парткод: | 1476228 |
| Деталь: | GREASE G-71(BLUE) |
| Парткод: | 1480655 |
| Деталь: | INK LEAK CHECK CARTRIDGE |
| Парткод: | 1493143 |
| Деталь: | DRAIN CARTRIDGE |
| Парткод: | 1500853 |
| Деталь: | CLEANING CARTRIDGE,200 |
| Парткод: | 1500854 |
| Деталь: | PG HEIGHT ADJUSTMENT JIG 1.75 |
| Парткод: | 1507277 |
| Деталь: | CLEANING PG ADJUSTMENT JIG |
| Парткод: | 1507278 |
| Деталь: | PG HEIGHT ADJUSTMENT JIG 1.65 |
| Парткод: | 1507506 |
| Деталь: | GREASE,G-84 |
| Парткод: | 1516265 |
| Деталь: | BOARD ASSY.,MAIN |
| Парткод: | 2129175 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2124763 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2124764 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2123402 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2126128 |
| Деталь: | POWER SUPPLY UNIT,B,ASP |
| Парткод: | 1513265 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1508119 |
| Деталь: | FAN ASSY.,ASP |
| Парткод: | 1507303 |
| Деталь: | GUIDE ROLL PAPER,L,UNIT,B,ESL,ASP |
| Парткод: | 1513123 |
| Деталь: | MOUNTING PLATE COVER ROLL PAPER LEFT,ASP |
| Парткод: | 1507818 |
| Деталь: | REWIND,UNIT,ESL,ASP |
| Парткод: | 1504202 |
| Деталь: | RAIL GUIDE ROLL PAPER,ASP |
| Парткод: | 1507816 |
| Деталь: | SENSOR,PE., UNIT,ESL,ASP |
| Парткод: | 1504214 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | CABLE,DETECTOR,HP,CR,ASP |
| Парткод: | 1513024 |
| Деталь: | DETECTOR,PAPER THICKNESS,UNIT,ESL,ASP |
| Парткод: | 1504175 |
| Деталь: | PANEL,UNIT,K,ESL,ASP |
| Парткод: | 1520214 |
| Деталь: | HARNESS,PANEL, C.,ASP |
| Парткод: | 1521058 |
| Деталь: | GUIDE,ROLL,PAPER,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504198 |
| Деталь: | PULLEY,DRIVEN,UNIT,24,ESL,ASP |
| Парткод: | 1504255 |
| Деталь: | SCALE,CR,24, B,ASP |
| Парткод: | 1528016 |
| Деталь: | MOTOR ASSY.,CR.,ASP |
| Парткод: | 1518708 |
| Деталь: | HOLDER,ASSY.,IC,RIGHT,K,ESL,ASP |
| Парткод: | 1520215 |
| Деталь: | PLUNGER,ASSY,ASP |
| Парткод: | 1504180 |
| Деталь: | HARNESS,RELAY,HEAD,RIGHT, B.,ASP |
| Парткод: | 1521059 |
| Деталь: | CR,UNIT,K,ESL,ASP |
| Парткод: | 1520216 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | COVER,CR,MAIN |
| Парткод: | 1480170 |
| Деталь: | PRINT HEAD |
| Парткод: | F191010 |
| Деталь: | HARNESS,HEAD,A, B.,ASP |
| Парткод: | 1521060 |
| Деталь: | HARNESS,HEAD,B, B,ASSY.,ASP |
| Парткод: | 1521061 |
| Деталь: | SELECTOR,UNIT,K-B,ESL,ASP |
| Парткод: | 1531526 |
| Деталь: | VALVE ASSY.,HEAD,F,ASP |
| Парткод: | 1531527 |
| Деталь: | SENSOR,COVER,FRONT,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504184 |
| Деталь: | SENSOR,COVER,FRONT,LEFT,UNIT,24,ESL,ASP |
| Парткод: | 1504251 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1531123 |
| Деталь: | HOLDER TUBE,ASP |
| Парткод: | 1507820 |
| Деталь: | HARNESS,DRV,RIGHT,UPPER, B.,ASP |
| Парткод: | 1521062 |
| Деталь: | HARNESS,CR, B.,ASP |
| Парткод: | 1521063 |
| Деталь: | HARNESS,DRV,RIGHT,LOWER, B.,ASP |
| Парткод: | 1521064 |
| Деталь: | TUBE ASSY.,SUPPLY,INK, B,ASP |
| Парткод: | 1504182 |
| Деталь: | HOLDER,WHEEL,EJ,LOWER,UNIT,ESL,ASP |
| Парткод: | 1504191 |
| Деталь: | COVER,CUTTER,UNIT,ESL,ASP |
| Парткод: | 1504192 |
| Деталь: | CATCH, B |
| Парткод: | 1520272 |
| Деталь: | PAPER,EJECTION,ROLLER,PE,UNIT,ESL,ASP |
| Парткод: | 1504188 |
| Деталь: | FRAME,RAIL,CUTTER,UNIT,24,ESL,ASP |
| Парткод: | 1504254 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | GUIDE,COVER,ROLL PAPER,SUPPORT |
| Парткод: | 1498876 |
| Деталь: | CLUMP,TUBE,DUCT |
| Парткод: | 1485681 |
| Деталь: | CLIP,DUCT,INK EJECT,LARGE |
| Парткод: | 1480298 |
| Деталь: | CLIP,DUCT,INK EJECT,SMALL |
| Парткод: | 1480299 |
| Деталь: | POROUS PAD,PLATEN |
| Парткод: | 1467289 |
| Деталь: | CABLE,FAN,RIGHT,ASP |
| Парткод: | 1508121 |
| Деталь: | CABLE,FAN,MIDDLE,ASP |
| Парткод: | 1508122 |
| Деталь: | HARNESS,MAINTENCANCE TANK,RIGHT, C.,ASP |
| Парткод: | 1521065 |
| Деталь: | PUMP ASSY.,PRESSURIZING,UNIT,ESL,ASP |
| Парткод: | 1504215 |
| Деталь: | TUBE,PRESSURIZING,RIGHT,ASP |
| Парткод: | 1507310 |
| Деталь: | LEAF SPRING,LOCK |
| Парткод: | 1220013 |
| Деталь: | EJECT,GUIDE,UNIT,ESL,ASP |
| Парткод: | 1504201 |
| Деталь: | POROUS PAD ASSY.,INK EJECT,PXMT3,ASP |
| Парткод: | 1522297 |
| Деталь: | MOTOR ASSY., RELEASE, ASP |
| Парткод: | 1505036 |
| Деталь: | CABLE,MOTOR,RELEASE,24,ASP |
| Парткод: | 1513027 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1508123 |
| Деталь: | APG,UNIT,ESL,ASP |
| Парткод: | 1504210 |
| Деталь: | CABLE,MOTOR,APG,ASP |
| Парткод: | 1513023 |
| Деталь: | HARNESS,RELAY,SUB,B,UPPER, C.,ASP |
| Парткод: | 1521066 |
| Деталь: | HARNESS,RELAY,SUB,B,LOWER, C.,ASP |
| Парткод: | 1521067 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513028 |
| Деталь: | HARNESS,RELAY,SUB,C,24, C.,ASP |
| Парткод: | 1521670 |
| Деталь: | HARNESS,RELAY,AID, B.,ASP |
| Парткод: | 1521069 |
| Деталь: | PUMP,CAP,ASSY,K,ESL,ASP |
| Парткод: | 1520218 |
| Деталь: | WIPER,ASSY,ASP |
| Парткод: | 1504179 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513029 |
| Деталь: | CABLE,SENSOR,RELEASE,ASP |
| Парткод: | 1513026 |
| Деталь: | COMBINATION GEAR,29,59.2,ASP |
| Парткод: | 1507314 |
| Деталь: | COMBINATION GEAR,23.2,48.8,ASP |
| Парткод: | 1507315 |
| Деталь: | COMBINATION GEAR,18.4,37.6,ASP |
| Парткод: | 1507316 |
| Деталь: | COMBINATION GEAR,26,12.8,ASP |
| Парткод: | 1507317 |
| Деталь: | SPUR GEAR,43,ASP |
| Парткод: | 1507318 |
| Деталь: | PROTECTION PLATE FFC,ASP |
| Парткод: | 1507819 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1003995 |
| Деталь: | PULLEY PF,ASP |
| Парткод: | 1507817 |
| Деталь: | MOTOR ASSY.,PF.,ASP |
| Парткод: | 1518709 |
| Деталь: | CABLE,GROUNDING,PF,ASP |
| Парткод: | 1508120 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 1438992 |
| Деталь: | HARNESS,ENCODER,PF, C.,ASP |
| Парткод: | 1521070 |
| Деталь: | SCALE,PF,UNIT,ESL,ASP |
| Парткод: | 1504181 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1480212 |
| Деталь: | E-RING,3,F/UC-3C |
| Парткод: | 1283663 |
| Деталь: | DETECTOR,PW |
| Парткод: | 2103859 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | SEAL RUBBER,JOINT,ASP |
| Парткод: | 1518317 |
| Деталь: | PULLEY,DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BELT,CR,24,B |
| Парткод: | 1513248 |
| Деталь: | GUIDE ROLL PAPER,L,UNIT,B,ESL,ASP |
| Парткод: | 1513123 |
| Деталь: | MOUNTING PLATE COVER ROLL PAPER LEFT,ASP |
| Парткод: | 1507818 |
| Деталь: | REWIND,UNIT,ESL,ASP |
| Парткод: | 1504202 |
| Деталь: | RAIL GUIDE ROLL PAPER,ASP |
| Парткод: | 1507816 |
| Деталь: | SENSOR,PE., UNIT,ESL,ASP |
| Парткод: | 1504214 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | CABLE,DETECTOR,HP,CR,ASP |
| Парткод: | 1513024 |
| Деталь: | DETECTOR,PAPER THICKNESS,UNIT,ESL,ASP |
| Парткод: | 1504175 |
| Деталь: | PANEL,UNIT,K,ESL,ASP |
| Парткод: | 1520214 |
| Деталь: | HARNESS,PANEL, C.,ASP |
| Парткод: | 1521058 |
| Деталь: | GUIDE,ROLL,PAPER,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504198 |
| Деталь: | PULLEY,DRIVEN,UNIT,24,ESL,ASP |
| Парткод: | 1504255 |
| Деталь: | SCALE,CR,24, B,ASP |
| Парткод: | 1528016 |
| Деталь: | MOTOR ASSY.,CR.,ASP |
| Парткод: | 1518708 |
| Деталь: | HOLDER,ASSY.,IC,RIGHT,K,ESL,ASP |
| Парткод: | 1520215 |
| Деталь: | PLUNGER,ASSY,ASP |
| Парткод: | 1504180 |
| Деталь: | HARNESS,RELAY,HEAD,RIGHT, B.,ASP |
| Парткод: | 1521059 |
| Деталь: | CR,UNIT,K,ESL,ASP |
| Парткод: | 1520216 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | COVER,CR,MAIN |
| Парткод: | 1480170 |
| Деталь: | PRINT HEAD |
| Парткод: | F191010 |
| Деталь: | HARNESS,HEAD,A, B.,ASP |
| Парткод: | 1521060 |
| Деталь: | HARNESS,HEAD,B, B,ASSY.,ASP |
| Парткод: | 1521061 |
| Деталь: | SELECTOR,UNIT,K-B,ESL,ASP |
| Парткод: | 1531526 |
| Деталь: | VALVE ASSY.,HEAD,F,ASP |
| Парткод: | 1531527 |
| Деталь: | SENSOR,COVER,FRONT,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504184 |
| Деталь: | SENSOR,COVER,FRONT,LEFT,UNIT,24,ESL,ASP |
| Парткод: | 1504251 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1531123 |
| Деталь: | HOLDER TUBE,ASP |
| Парткод: | 1507820 |
| Деталь: | HARNESS,DRV,RIGHT,UPPER, B.,ASP |
| Парткод: | 1521062 |
| Деталь: | HARNESS,CR, B.,ASP |
| Парткод: | 1521063 |
| Деталь: | HARNESS,DRV,RIGHT,LOWER, B.,ASP |
| Парткод: | 1521064 |
| Деталь: | TUBE ASSY.,SUPPLY,INK, B,ASP |
| Парткод: | 1504182 |
| Деталь: | HOLDER,WHEEL,EJ,LOWER,UNIT,ESL,ASP |
| Парткод: | 1504191 |
| Деталь: | COVER,CUTTER,UNIT,ESL,ASP |
| Парткод: | 1504192 |
| Деталь: | CATCH, B |
| Парткод: | 1520272 |
| Деталь: | PAPER,EJECTION,ROLLER,PE,UNIT,ESL,ASP |
| Парткод: | 1504188 |
| Деталь: | FRAME,RAIL,CUTTER,UNIT,24,ESL,ASP |
| Парткод: | 1504254 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | GUIDE,COVER,ROLL PAPER,SUPPORT |
| Парткод: | 1498876 |
| Деталь: | CLUMP,TUBE,DUCT |
| Парткод: | 1485681 |
| Деталь: | CLIP,DUCT,INK EJECT,LARGE |
| Парткод: | 1480298 |
| Деталь: | CLIP,DUCT,INK EJECT,SMALL |
| Парткод: | 1480299 |
| Деталь: | POROUS PAD,PLATEN |
| Парткод: | 1467289 |
| Деталь: | CABLE,FAN,RIGHT,ASP |
| Парткод: | 1508121 |
| Деталь: | CABLE,FAN,MIDDLE,ASP |
| Парткод: | 1508122 |
| Деталь: | HARNESS,MAINTENCANCE TANK,RIGHT, C.,ASP |
| Парткод: | 1521065 |
| Деталь: | PUMP ASSY.,PRESSURIZING,UNIT,ESL,ASP |
| Парткод: | 1504215 |
| Деталь: | TUBE,PRESSURIZING,RIGHT,ASP |
| Парткод: | 1507310 |
| Деталь: | LEAF SPRING,LOCK |
| Парткод: | 1220013 |
| Деталь: | EJECT,GUIDE,UNIT,ESL,ASP |
| Парткод: | 1504201 |
| Деталь: | POROUS PAD ASSY.,INK EJECT,PXMT3,ASP |
| Парткод: | 1522297 |
| Деталь: | MOTOR ASSY., RELEASE, ASP |
| Парткод: | 1505036 |
| Деталь: | CABLE,MOTOR,RELEASE,24,ASP |
| Парткод: | 1513027 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1508123 |
| Деталь: | APG,UNIT,ESL,ASP |
| Парткод: | 1504210 |
| Деталь: | CABLE,MOTOR,APG,ASP |
| Парткод: | 1513023 |
| Деталь: | HARNESS,RELAY,SUB,B,UPPER, C.,ASP |
| Парткод: | 1521066 |
| Деталь: | HARNESS,RELAY,SUB,B,LOWER, C.,ASP |
| Парткод: | 1521067 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513028 |
| Деталь: | HARNESS,RELAY,SUB,C,24, C.,ASP |
| Парткод: | 1521670 |
| Деталь: | HARNESS,RELAY,AID, B.,ASP |
| Парткод: | 1521069 |
| Деталь: | PUMP,CAP,ASSY,K,ESL,ASP |
| Парткод: | 1520218 |
| Деталь: | WIPER,ASSY,ASP |
| Парткод: | 1504179 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513029 |
| Деталь: | CABLE,SENSOR,RELEASE,ASP |
| Парткод: | 1513026 |
| Деталь: | COMBINATION GEAR,29,59.2,ASP |
| Парткод: | 1507314 |
| Деталь: | COMBINATION GEAR,23.2,48.8,ASP |
| Парткод: | 1507315 |
| Деталь: | COMBINATION GEAR,18.4,37.6,ASP |
| Парткод: | 1507316 |
| Деталь: | COMBINATION GEAR,26,12.8,ASP |
| Парткод: | 1507317 |
| Деталь: | SPUR GEAR,43,ASP |
| Парткод: | 1507318 |
| Деталь: | PROTECTION PLATE FFC,ASP |
| Парткод: | 1507819 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1003995 |
| Деталь: | PULLEY PF,ASP |
| Парткод: | 1507817 |
| Деталь: | MOTOR ASSY.,PF.,ASP |
| Парткод: | 1518709 |
| Деталь: | CABLE,GROUNDING,PF,ASP |
| Парткод: | 1508120 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 1438992 |
| Деталь: | HARNESS,ENCODER,PF, C.,ASP |
| Парткод: | 1521070 |
| Деталь: | SCALE,PF,UNIT,ESL,ASP |
| Парткод: | 1504181 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1480212 |
| Деталь: | E-RING,3,F/UC-3C |
| Парткод: | 1283663 |
| Деталь: | DETECTOR,PW |
| Парткод: | 2103859 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | SEAL RUBBER,JOINT,ASP |
| Парткод: | 1518317 |
| Деталь: | PULLEY,DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BELT,CR,24,B |
| Парткод: | 1513248 |
| Деталь: | HOLDER,WHEEL,EJ,LOWER,24,ASSY,ASP |
| Парткод: | 1504252 |
| Деталь: | CATCH,SUPPORT |
| Парткод: | 1520273 |
| Деталь: | OIL PAD,MAIN SHAFT,CR,ASSY.,ASP |
| Парткод: | 1526840 |
| Деталь: | FRAME,PAPER GUIDE,UPPER,24,ASP |
| Парткод: | 1528412 |
| Деталь: | COVER,CSIC,RIGHT |
| Парткод: | 1481479 |
| Деталь: | GUIDE ROLL PAPER,L,UNIT,B,ESL,ASP |
| Парткод: | 1513123 |
| Деталь: | MOUNTING PLATE COVER ROLL PAPER LEFT,ASP |
| Парткод: | 1507818 |
| Деталь: | REWIND,UNIT,ESL,ASP |
| Парткод: | 1504202 |
| Деталь: | RAIL GUIDE ROLL PAPER,ASP |
| Парткод: | 1507816 |
| Деталь: | SENSOR,PE., UNIT,ESL,ASP |
| Парткод: | 1504214 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | CABLE,DETECTOR,HP,CR,ASP |
| Парткод: | 1513024 |
| Деталь: | DETECTOR,PAPER THICKNESS,UNIT,ESL,ASP |
| Парткод: | 1504175 |
| Деталь: | PANEL,UNIT,K,ESL,ASP |
| Парткод: | 1520214 |
| Деталь: | HARNESS,PANEL, C.,ASP |
| Парткод: | 1521058 |
| Деталь: | GUIDE,ROLL,PAPER,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504198 |
| Деталь: | PULLEY,DRIVEN,UNIT,24,ESL,ASP |
| Парткод: | 1504255 |
| Деталь: | SCALE,CR,24, B,ASP |
| Парткод: | 1528016 |
| Деталь: | MOTOR ASSY.,CR.,ASP |
| Парткод: | 1518708 |
| Деталь: | HOLDER,ASSY.,IC,RIGHT,K,ESL,ASP |
| Парткод: | 1520215 |
| Деталь: | PLUNGER,ASSY,ASP |
| Парткод: | 1504180 |
| Деталь: | HARNESS,RELAY,HEAD,RIGHT, B.,ASP |
| Парткод: | 1521059 |
| Деталь: | CR,UNIT,K,ESL,ASP |
| Парткод: | 1520216 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | COVER,CR,MAIN |
| Парткод: | 1480170 |
| Деталь: | PRINT HEAD |
| Парткод: | F191010 |
| Деталь: | HARNESS,HEAD,A, B.,ASP |
| Парткод: | 1521060 |
| Деталь: | HARNESS,HEAD,B, B,ASSY.,ASP |
| Парткод: | 1521061 |
| Деталь: | SELECTOR,UNIT,K-B,ESL,ASP |
| Парткод: | 1531526 |
| Деталь: | VALVE ASSY.,HEAD,F,ASP |
| Парткод: | 1531527 |
| Деталь: | SENSOR,COVER,FRONT,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504184 |
| Деталь: | SENSOR,COVER,FRONT,LEFT,UNIT,24,ESL,ASP |
| Парткод: | 1504251 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1531123 |
| Деталь: | HOLDER TUBE,ASP |
| Парткод: | 1507820 |
| Деталь: | HARNESS,DRV,RIGHT,UPPER, B.,ASP |
| Парткод: | 1521062 |
| Деталь: | HARNESS,CR, B.,ASP |
| Парткод: | 1521063 |
| Деталь: | HARNESS,DRV,RIGHT,LOWER, B.,ASP |
| Парткод: | 1521064 |
| Деталь: | TUBE ASSY.,SUPPLY,INK, B,ASP |
| Парткод: | 1504182 |
| Деталь: | HOLDER,WHEEL,EJ,LOWER,UNIT,ESL,ASP |
| Парткод: | 1504191 |
| Деталь: | COVER,CUTTER,UNIT,ESL,ASP |
| Парткод: | 1504192 |
| Деталь: | CATCH, B |
| Парткод: | 1520272 |
| Деталь: | PAPER,EJECTION,ROLLER,PE,UNIT,ESL,ASP |
| Парткод: | 1504188 |
| Деталь: | FRAME,RAIL,CUTTER,UNIT,24,ESL,ASP |
| Парткод: | 1504254 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | GUIDE,COVER,ROLL PAPER,SUPPORT |
| Парткод: | 1498876 |
| Деталь: | CLUMP,TUBE,DUCT |
| Парткод: | 1485681 |
| Деталь: | CLIP,DUCT,INK EJECT,LARGE |
| Парткод: | 1480298 |
| Деталь: | CLIP,DUCT,INK EJECT,SMALL |
| Парткод: | 1480299 |
| Деталь: | POROUS PAD,PLATEN |
| Парткод: | 1467289 |
| Деталь: | CABLE,FAN,RIGHT,ASP |
| Парткод: | 1508121 |
| Деталь: | CABLE,FAN,MIDDLE,ASP |
| Парткод: | 1508122 |
| Деталь: | HARNESS,MAINTENCANCE TANK,RIGHT, C.,ASP |
| Парткод: | 1521065 |
| Деталь: | PUMP ASSY.,PRESSURIZING,UNIT,ESL,ASP |
| Парткод: | 1504215 |
| Деталь: | TUBE,PRESSURIZING,RIGHT,ASP |
| Парткод: | 1507310 |
| Деталь: | LEAF SPRING,LOCK |
| Парткод: | 1220013 |
| Деталь: | EJECT,GUIDE,UNIT,ESL,ASP |
| Парткод: | 1504201 |
| Деталь: | POROUS PAD ASSY.,INK EJECT,PXMT3,ASP |
| Парткод: | 1522297 |
| Деталь: | MOTOR ASSY., RELEASE, ASP |
| Парткод: | 1505036 |
| Деталь: | CABLE,MOTOR,RELEASE,24,ASP |
| Парткод: | 1513027 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1508123 |
| Деталь: | APG,UNIT,ESL,ASP |
| Парткод: | 1504210 |
| Деталь: | CABLE,MOTOR,APG,ASP |
| Парткод: | 1513023 |
| Деталь: | HARNESS,RELAY,SUB,B,UPPER, C.,ASP |
| Парткод: | 1521066 |
| Деталь: | HARNESS,RELAY,SUB,B,LOWER, C.,ASP |
| Парткод: | 1521067 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513028 |
| Деталь: | HARNESS,RELAY,SUB,C,24, C.,ASP |
| Парткод: | 1521670 |
| Деталь: | HARNESS,RELAY,AID, B.,ASP |
| Парткод: | 1521069 |
| Деталь: | PUMP,CAP,ASSY,K,ESL,ASP |
| Парткод: | 1520218 |
| Деталь: | WIPER,ASSY,ASP |
| Парткод: | 1504179 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513029 |
| Деталь: | CABLE,SENSOR,RELEASE,ASP |
| Парткод: | 1513026 |
| Деталь: | COMBINATION GEAR,29,59.2,ASP |
| Парткод: | 1507314 |
| Деталь: | COMBINATION GEAR,23.2,48.8,ASP |
| Парткод: | 1507315 |
| Деталь: | COMBINATION GEAR,18.4,37.6,ASP |
| Парткод: | 1507316 |
| Деталь: | COMBINATION GEAR,26,12.8,ASP |
| Парткод: | 1507317 |
| Деталь: | SPUR GEAR,43,ASP |
| Парткод: | 1507318 |
| Деталь: | PROTECTION PLATE FFC,ASP |
| Парткод: | 1507819 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1003995 |
| Деталь: | PULLEY PF,ASP |
| Парткод: | 1507817 |
| Деталь: | MOTOR ASSY.,PF.,ASP |
| Парткод: | 1518709 |
| Деталь: | CABLE,GROUNDING,PF,ASP |
| Парткод: | 1508120 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 1438992 |
| Деталь: | HARNESS,ENCODER,PF, C.,ASP |
| Парткод: | 1521070 |
| Деталь: | SCALE,PF,UNIT,ESL,ASP |
| Парткод: | 1504181 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1480212 |
| Деталь: | E-RING,3,F/UC-3C |
| Парткод: | 1283663 |
| Деталь: | DETECTOR,PW |
| Парткод: | 2103859 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | SEAL RUBBER,JOINT,ASP |
| Парткод: | 1518317 |
| Деталь: | PULLEY,DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BELT,CR,24,B |
| Парткод: | 1513248 |
| Деталь: | HOLDER,WHEEL,EJ,LOWER,24,ASSY,ASP |
| Парткод: | 1504252 |
| Деталь: | CATCH,SUPPORT |
| Парткод: | 1520273 |
| Деталь: | OIL PAD,MAIN SHAFT,CR,ASSY.,ASP |
| Парткод: | 1526840 |
| Деталь: | FRAME,PAPER GUIDE,UPPER,24,ASP |
| Парткод: | 1528412 |
| Деталь: | COVER,CSIC,RIGHT |
| Парткод: | 1481479 |
| Деталь: | GUIDE ROLL PAPER,L,UNIT,B,ESL,ASP |
| Парткод: | 1513123 |
| Деталь: | MOUNTING PLATE COVER ROLL PAPER LEFT,ASP |
| Парткод: | 1507818 |
| Деталь: | REWIND,UNIT,ESL,ASP |
| Парткод: | 1504202 |
| Деталь: | RAIL GUIDE ROLL PAPER,ASP |
| Парткод: | 1507816 |
| Деталь: | SENSOR,PE., UNIT,ESL,ASP |
| Парткод: | 1504214 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | CABLE,DETECTOR,HP,CR,ASP |
| Парткод: | 1513024 |
| Деталь: | DETECTOR,PAPER THICKNESS,UNIT,ESL,ASP |
| Парткод: | 1504175 |
| Деталь: | PANEL,UNIT,K,ESL,ASP |
| Парткод: | 1520214 |
| Деталь: | HARNESS,PANEL, C.,ASP |
| Парткод: | 1521058 |
| Деталь: | GUIDE,ROLL,PAPER,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504198 |
| Деталь: | PULLEY,DRIVEN,UNIT,24,ESL,ASP |
| Парткод: | 1504255 |
| Деталь: | SCALE,CR,24, B,ASP |
| Парткод: | 1528016 |
| Деталь: | MOTOR ASSY.,CR.,ASP |
| Парткод: | 1518708 |
| Деталь: | HOLDER,ASSY.,IC,RIGHT,K,ESL,ASP |
| Парткод: | 1520215 |
| Деталь: | PLUNGER,ASSY,ASP |
| Парткод: | 1504180 |
| Деталь: | HARNESS,RELAY,HEAD,RIGHT, B.,ASP |
| Парткод: | 1521059 |
| Деталь: | CR,UNIT,K,ESL,ASP |
| Парткод: | 1520216 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | COVER,CR,MAIN |
| Парткод: | 1480170 |
| Деталь: | PRINT HEAD |
| Парткод: | F191010 |
| Деталь: | HARNESS,HEAD,A, B.,ASP |
| Парткод: | 1521060 |
| Деталь: | HARNESS,HEAD,B, B,ASSY.,ASP |
| Парткод: | 1521061 |
| Деталь: | SELECTOR,UNIT,K-B,ESL,ASP |
| Парткод: | 1531526 |
| Деталь: | VALVE ASSY.,HEAD,F,ASP |
| Парткод: | 1531527 |
| Деталь: | SENSOR,COVER,FRONT,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504184 |
| Деталь: | SENSOR,COVER,FRONT,LEFT,UNIT,24,ESL,ASP |
| Парткод: | 1504251 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1531123 |
| Деталь: | HOLDER TUBE,ASP |
| Парткод: | 1507820 |
| Деталь: | HARNESS,DRV,RIGHT,UPPER, B.,ASP |
| Парткод: | 1521062 |
| Деталь: | HARNESS,CR, B.,ASP |
| Парткод: | 1521063 |
| Деталь: | HARNESS,DRV,RIGHT,LOWER, B.,ASP |
| Парткод: | 1521064 |
| Деталь: | TUBE ASSY.,SUPPLY,INK, B,ASP |
| Парткод: | 1504182 |
| Деталь: | HOLDER,WHEEL,EJ,LOWER,UNIT,ESL,ASP |
| Парткод: | 1504191 |
| Деталь: | COVER,CUTTER,UNIT,ESL,ASP |
| Парткод: | 1504192 |
| Деталь: | CATCH, B |
| Парткод: | 1520272 |
| Деталь: | PAPER,EJECTION,ROLLER,PE,UNIT,ESL,ASP |
| Парткод: | 1504188 |
| Деталь: | FRAME,RAIL,CUTTER,UNIT,24,ESL,ASP |
| Парткод: | 1504254 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | GUIDE,COVER,ROLL PAPER,SUPPORT |
| Парткод: | 1498876 |
| Деталь: | CLUMP,TUBE,DUCT |
| Парткод: | 1485681 |
| Деталь: | CLIP,DUCT,INK EJECT,LARGE |
| Парткод: | 1480298 |
| Деталь: | CLIP,DUCT,INK EJECT,SMALL |
| Парткод: | 1480299 |
| Деталь: | POROUS PAD,PLATEN |
| Парткод: | 1467289 |
| Деталь: | CABLE,FAN,RIGHT,ASP |
| Парткод: | 1508121 |
| Деталь: | CABLE,FAN,MIDDLE,ASP |
| Парткод: | 1508122 |
| Деталь: | HARNESS,MAINTENCANCE TANK,RIGHT, C.,ASP |
| Парткод: | 1521065 |
| Деталь: | PUMP ASSY.,PRESSURIZING,UNIT,ESL,ASP |
| Парткод: | 1504215 |
| Деталь: | TUBE,PRESSURIZING,RIGHT,ASP |
| Парткод: | 1507310 |
| Деталь: | LEAF SPRING,LOCK |
| Парткод: | 1220013 |
| Деталь: | EJECT,GUIDE,UNIT,ESL,ASP |
| Парткод: | 1504201 |
| Деталь: | POROUS PAD ASSY.,INK EJECT,PXMT3,ASP |
| Парткод: | 1522297 |
| Деталь: | MOTOR ASSY., RELEASE, ASP |
| Парткод: | 1505036 |
| Деталь: | CABLE,MOTOR,RELEASE,24,ASP |
| Парткод: | 1513027 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1508123 |
| Деталь: | APG,UNIT,ESL,ASP |
| Парткод: | 1504210 |
| Деталь: | CABLE,MOTOR,APG,ASP |
| Парткод: | 1513023 |
| Деталь: | HARNESS,RELAY,SUB,B,UPPER, C.,ASP |
| Парткод: | 1521066 |
| Деталь: | HARNESS,RELAY,SUB,B,LOWER, C.,ASP |
| Парткод: | 1521067 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513028 |
| Деталь: | HARNESS,RELAY,SUB,C,24, C.,ASP |
| Парткод: | 1521670 |
| Деталь: | HARNESS,RELAY,AID, B.,ASP |
| Парткод: | 1521069 |
| Деталь: | PUMP,CAP,ASSY,K,ESL,ASP |
| Парткод: | 1520218 |
| Деталь: | WIPER,ASSY,ASP |
| Парткод: | 1504179 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513029 |
| Деталь: | CABLE,SENSOR,RELEASE,ASP |
| Парткод: | 1513026 |
| Деталь: | COMBINATION GEAR,29,59.2,ASP |
| Парткод: | 1507314 |
| Деталь: | COMBINATION GEAR,23.2,48.8,ASP |
| Парткод: | 1507315 |
| Деталь: | COMBINATION GEAR,18.4,37.6,ASP |
| Парткод: | 1507316 |
| Деталь: | COMBINATION GEAR,26,12.8,ASP |
| Парткод: | 1507317 |
| Деталь: | SPUR GEAR,43,ASP |
| Парткод: | 1507318 |
| Деталь: | PROTECTION PLATE FFC,ASP |
| Парткод: | 1507819 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1003995 |
| Деталь: | PULLEY PF,ASP |
| Парткод: | 1507817 |
| Деталь: | MOTOR ASSY.,PF.,ASP |
| Парткод: | 1518709 |
| Деталь: | CABLE,GROUNDING,PF,ASP |
| Парткод: | 1508120 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 1438992 |
| Деталь: | HARNESS,ENCODER,PF, C.,ASP |
| Парткод: | 1521070 |
| Деталь: | SCALE,PF,UNIT,ESL,ASP |
| Парткод: | 1504181 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1480212 |
| Деталь: | E-RING,3,F/UC-3C |
| Парткод: | 1283663 |
| Деталь: | DETECTOR,PW |
| Парткод: | 2103859 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | SEAL RUBBER,JOINT,ASP |
| Парткод: | 1518317 |
| Деталь: | PULLEY,DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BELT,CR,24,B |
| Парткод: | 1513248 |
| Деталь: | GUIDE ROLL PAPER,L,UNIT,B,ESL,ASP |
| Парткод: | 1513123 |
| Деталь: | MOUNTING PLATE COVER ROLL PAPER LEFT,ASP |
| Парткод: | 1507818 |
| Деталь: | REWIND,UNIT,ESL,ASP |
| Парткод: | 1504202 |
| Деталь: | RAIL GUIDE ROLL PAPER,ASP |
| Парткод: | 1507816 |
| Деталь: | SENSOR,PE., UNIT,ESL,ASP |
| Парткод: | 1504214 |
| Деталь: | PHOTO INTERUPTER,TLP1243(C8) |
| Парткод: | 2090532 |
| Деталь: | CABLE,DETECTOR,HP,CR,ASP |
| Парткод: | 1513024 |
| Деталь: | DETECTOR,PAPER THICKNESS,UNIT,ESL,ASP |
| Парткод: | 1504175 |
| Деталь: | PANEL,UNIT,K,ESL,ASP |
| Парткод: | 1520214 |
| Деталь: | HARNESS,PANEL, C.,ASP |
| Парткод: | 1521058 |
| Деталь: | GUIDE,ROLL,PAPER,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504198 |
| Деталь: | PULLEY,DRIVEN,UNIT,24,ESL,ASP |
| Парткод: | 1504255 |
| Деталь: | SCALE,CR,24, B,ASP |
| Парткод: | 1528016 |
| Деталь: | MOTOR ASSY.,CR.,ASP |
| Парткод: | 1518708 |
| Деталь: | HOLDER,ASSY.,IC,RIGHT,K,ESL,ASP |
| Парткод: | 1520215 |
| Деталь: | PLUNGER,ASSY,ASP |
| Парткод: | 1504180 |
| Деталь: | HARNESS,RELAY,HEAD,RIGHT, B.,ASP |
| Парткод: | 1521059 |
| Деталь: | CR,UNIT,K,ESL,ASP |
| Парткод: | 1520216 |
| Деталь: | BOARD ASSY.,INK MARK |
| Парткод: | 2084550 |
| Деталь: | COVER,CR,MAIN |
| Парткод: | 1480170 |
| Деталь: | PRINT HEAD |
| Парткод: | F191010 |
| Деталь: | HARNESS,HEAD,A, B.,ASP |
| Парткод: | 1521060 |
| Деталь: | HARNESS,HEAD,B, B,ASSY.,ASP |
| Парткод: | 1521061 |
| Деталь: | SELECTOR,UNIT,K-B,ESL,ASP |
| Парткод: | 1531526 |
| Деталь: | VALVE ASSY.,HEAD,F,ASP |
| Парткод: | 1531527 |
| Деталь: | SENSOR,COVER,FRONT,RIGHT,UNIT,ESL,ASP |
| Парткод: | 1504184 |
| Деталь: | SENSOR,COVER,FRONT,LEFT,UNIT,24,ESL,ASP |
| Парткод: | 1504251 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1531123 |
| Деталь: | HOLDER TUBE,ASP |
| Парткод: | 1507820 |
| Деталь: | HARNESS,DRV,RIGHT,UPPER, B.,ASP |
| Парткод: | 1521062 |
| Деталь: | HARNESS,CR, B.,ASP |
| Парткод: | 1521063 |
| Деталь: | HARNESS,DRV,RIGHT,LOWER, B.,ASP |
| Парткод: | 1521064 |
| Деталь: | TUBE ASSY.,SUPPLY,INK, B,ASP |
| Парткод: | 1504182 |
| Деталь: | HOLDER,WHEEL,EJ,LOWER,UNIT,ESL,ASP |
| Парткод: | 1504191 |
| Деталь: | COVER,CUTTER,UNIT,ESL,ASP |
| Парткод: | 1504192 |
| Деталь: | CATCH, B |
| Парткод: | 1520272 |
| Деталь: | PAPER,EJECTION,ROLLER,PE,UNIT,ESL,ASP |
| Парткод: | 1504188 |
| Деталь: | FRAME,RAIL,CUTTER,UNIT,24,ESL,ASP |
| Парткод: | 1504254 |
| Деталь: | CABLE CLAMP |
| Парткод: | 1059713 |
| Деталь: | GUIDE,COVER,ROLL PAPER,SUPPORT |
| Парткод: | 1498876 |
| Деталь: | CLUMP,TUBE,DUCT |
| Парткод: | 1485681 |
| Деталь: | CLIP,DUCT,INK EJECT,LARGE |
| Парткод: | 1480298 |
| Деталь: | CLIP,DUCT,INK EJECT,SMALL |
| Парткод: | 1480299 |
| Деталь: | POROUS PAD,PLATEN |
| Парткод: | 1467289 |
| Деталь: | CABLE,FAN,RIGHT,ASP |
| Парткод: | 1508121 |
| Деталь: | CABLE,FAN,MIDDLE,ASP |
| Парткод: | 1508122 |
| Деталь: | HARNESS,MAINTENCANCE TANK,RIGHT, C.,ASP |
| Парткод: | 1521065 |
| Деталь: | PUMP ASSY.,PRESSURIZING,UNIT,ESL,ASP |
| Парткод: | 1504215 |
| Деталь: | TUBE,PRESSURIZING,RIGHT,ASP |
| Парткод: | 1507310 |
| Деталь: | LEAF SPRING,LOCK |
| Парткод: | 1220013 |
| Деталь: | EJECT,GUIDE,UNIT,ESL,ASP |
| Парткод: | 1504201 |
| Деталь: | POROUS PAD ASSY.,INK EJECT,PXMT3,ASP |
| Парткод: | 1522297 |
| Деталь: | MOTOR ASSY., RELEASE, ASP |
| Парткод: | 1505036 |
| Деталь: | CABLE,MOTOR,RELEASE,24,ASP |
| Парткод: | 1513027 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1508123 |
| Деталь: | APG,UNIT,ESL,ASP |
| Парткод: | 1504210 |
| Деталь: | CABLE,MOTOR,APG,ASP |
| Парткод: | 1513023 |
| Деталь: | HARNESS,RELAY,SUB,B,UPPER, C.,ASP |
| Парткод: | 1521066 |
| Деталь: | HARNESS,RELAY,SUB,B,LOWER, C.,ASP |
| Парткод: | 1521067 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513028 |
| Деталь: | HARNESS,RELAY,SUB,C,24, C.,ASP |
| Парткод: | 1521670 |
| Деталь: | HARNESS,RELAY,AID, B.,ASP |
| Парткод: | 1521069 |
| Деталь: | PUMP,CAP,ASSY,K,ESL,ASP |
| Парткод: | 1520218 |
| Деталь: | WIPER,ASSY,ASP |
| Парткод: | 1504179 |
| Деталь: | HARNESS,ASP |
| Парткод: | 1513029 |
| Деталь: | CABLE,SENSOR,RELEASE,ASP |
| Парткод: | 1513026 |
| Деталь: | COMBINATION GEAR,29,59.2,ASP |
| Парткод: | 1507314 |
| Деталь: | COMBINATION GEAR,23.2,48.8,ASP |
| Парткод: | 1507315 |
| Деталь: | COMBINATION GEAR,18.4,37.6,ASP |
| Парткод: | 1507316 |
| Деталь: | COMBINATION GEAR,26,12.8,ASP |
| Парткод: | 1507317 |
| Деталь: | SPUR GEAR,43,ASP |
| Парткод: | 1507318 |
| Деталь: | PROTECTION PLATE FFC,ASP |
| Парткод: | 1507819 |
| Деталь: | EDGE SADDLE |
| Парткод: | 1003995 |
| Деталь: | PULLEY PF,ASP |
| Парткод: | 1507817 |
| Деталь: | MOTOR ASSY.,PF.,ASP |
| Парткод: | 1518709 |
| Деталь: | CABLE,GROUNDING,PF,ASP |
| Парткод: | 1508120 |
| Деталь: | BOARD ASSY.,ENCODER,PF |
| Парткод: | 1438992 |
| Деталь: | HARNESS,ENCODER,PF, C.,ASP |
| Парткод: | 1521070 |
| Деталь: | SCALE,PF,UNIT,ESL,ASP |
| Парткод: | 1504181 |
| Деталь: | TIMING BELT,PF |
| Парткод: | 1480212 |
| Деталь: | E-RING,3,F/UC-3C |
| Парткод: | 1283663 |
| Деталь: | DETECTOR,PW |
| Парткод: | 2103859 |
| Деталь: | BOARD ASSY.,ENCODER |
| Парткод: | 1480177 |
| Деталь: | SEAL RUBBER,JOINT,ASP |
| Парткод: | 1518317 |
| Деталь: | PULLEY,DRIVEN |
| Парткод: | 1480133 |
| Деталь: | BELT,CR,24,B |
| Парткод: | 1513248 |
Коды ошибок
1101
1125
1138
113A
113B
113C
113D
113E
113F
122A
122B
122C
122D
122E
122F
131B
13F0
1411
1412
1419
141A
141B
141C
141D
141E
141F
1427
1428
1430
1431
1434
1438
1439
143A
143B
143C
143D
143E
143F
144A
144B
144C
144D
144E
144F
1489
148A
148B
148C
148D
148E
148F
1494
1496
1497
149D
1501
150C
151A
151B
151C
151D
151E
151F
152A
152B
152C
152D
152E
152F
1530
1536
1537
153A
153B
153C
153D
153E
153F
1540
1541
1549
154A
154B
154C
154D
154E
154F
1551
1561
1800
1A23
1A26
1A37
1A38
1A39
1A40
1A41
1A50
1A51
1A52
1A53
2000
2002
2003
200A
200D
200E
2010
3000
D131
Dxxx
Fxxx
Описание
| Error code: | 1101 |
| Display: | Replace part soon. |
| Description: | Data transmission did not finish within the specified time. |
| Causes: | An incompatible loop-back connector is connected to the parallel port, or the loop-back connector is not connected. Use the correct loop-back connector (P/#: G0219350) before the test. |
| Remedy: | Load paper. If the problem remains, then check the paper sensor. |
| Error code: | 1125 |
| Description: | CR HP detection error The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set. • CR HP SENSOR failure • False detection of the home due to paper jam or any other obstacle • Misreading of CR SCALE • CR Lock is damaged. |
| Causes: | The CR HP SENSOR cannot detect the CR UNIT. Or the CR UNIT cannot detect the touching surface for the home position setting, so the home position cannot be set. • CR HP SENSOR failure • False detection of the home due to paper jam or any other obstacle • Misreading of CR SCALE • CR Lock is damaged. |
| Remedy: | 1. Replace the CR HP SENSOR. 2. Re-install the CR ENCODER. If it is faulty, replace it. 3. Clean the CR SCALE using ethanol. 4. Replace the CR SCALE. 5. Replace the CR Lock . |
| Error code: | 1138 |
| Description: | Over current error Connection failure of the CR MOTOR or the CR ENCODER. • The number of occurrences of overcurrent to the CR MOTOR has reached a predetermined limit. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | • Connection failure of the CR MOTOR or the CR ENCODER. • The number of occurrences of overcurrent to the CR MOTOR has reached a predetermined limit. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. |
| Error code: | 113A |
| Description: | Overload error Overcurrent to the CR MOTOR was detected. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | Overcurrent to the CR MOTOR was detected. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Re-install the CR UNIT. 2. Replace the CR ENCODER. 3. Replace the CR MOTOR. |
| Error code: | 113B |
| Description: | Over speed error The CR MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CR ENCODER failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Causes: | The CR MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CR ENCODER failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the SUB BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 113C |
| Description: | Reversing error The number of occurrences of reversing the CR MOTOR has reached a predetermined limit. • The polarity of CR ENCODER cable is opposite. • The polarity of CR MOTOR cable is opposite. • Slipping of the teeth of CR TIMING BELT • CR ENCODER failure |
| Causes: | The number of occurrences of reversing the CR MOTOR has reached a predetermined limit. • The polarity of CR ENCODER cable is opposite. • The polarity of CR MOTOR cable is opposite. • Slipping of the teeth of CR TIMING BELT • CR ENCODER failure |
| Remedy: | 1. Adjust the tension of the CR TIMING BELT. 2. Replace the CR ENCODER. |
| Error code: | 113D |
| Description: | Driving time-out error Abnormally-long driving duration of the CR MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the CR MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 113E |
| Description: | Velocity deviation error The CR MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CR ENCODER failure • CR MOTOR failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Causes: | The CR MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CR ENCODER failure • CR MOTOR failure • SUB BOARD is damaged. • CR MOTOR driver failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. 3. Replace the SUB BOARD. 4. Replace the MAIN BOARD. |
| Error code: | 113F |
| Description: | Lock error The CR MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Causes: | The CR MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • CR ENCODER cable is damaged. • CR MOTOR cable is damaged. • Irregular load • CR ENCODER failure • CR MOTOR failure |
| Remedy: | 1. Replace the CR ENCODER. 2. Replace the CR MOTOR. |
| Error code: | 122A |
| Description: | Overload error Overcurrent to the PF MOTOR was detected. • PF ENCODER cable is damaged. • PF MOTOR cable is damaged. • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Causes: | Overcurrent to the PF MOTOR was detected. • PF ENCODER cable is damaged. • PF MOTOR cable is damaged. • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the MAIN BOARD. |
| Error code: | 122B |
| Description: | Over speed error The PF MOTOR was driven at a speed faster than a predetermined one during deceleration. • PF irregular load • PF ENCODER failure • SUB-B BOARD is damaged. • PF MOTOR driver failure |
| Causes: | The PF MOTOR was driven at a speed faster than a predetermined one during deceleration. • PF irregular load • PF ENCODER failure • SUB-B BOARD is damaged. • PF MOTOR driver failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the SUB-B BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 122C |
| Description: | Reversing error The number of occurrences of reversing the PF MOTOR has reached a predetermined limit. • The polarity of PF ENCODER cable is opposite. • The polarity of PF MOTOR cable is opposite. • Slipping of the teeth of PF TIMING BELT • PF ENCODER failure |
| Causes: | The number of occurrences of reversing the PF MOTOR has reached a predetermined limit. • The polarity of PF ENCODER cable is opposite. • The polarity of PF MOTOR cable is opposite. • Slipping of the teeth of PF TIMING BELT • PF ENCODER failure |
| Remedy: | 1. Adjust the tension of the PF TIMING BELT. 2. Replace the PF ENCODER. |
| Error code: | 122D |
| Description: | Driving time-out error Abnormally-long driving duration of the PF MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the PF MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 122E |
| Description: | Velocity deviation error The PF MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PF ENCODER failure • PF MOTOR failure • SUB BOARD is damaged. • PF MOTOR driver failure |
| Causes: | The PF MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PF ENCODER failure • PF MOTOR failure • SUB BOARD is damaged. • PF MOTOR driver failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the PF MOTOR. 3. Replace the MAIN BOARD. |
| Error code: | 122F |
| Description: | Lock error The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • PF ENCODER cable disconnection • PF MOTOR cable disconnection • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Causes: | The PF MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • PF ENCODER cable disconnection • PF MOTOR cable disconnection • Irregular load • PF ENCODER failure • PF MOTOR failure |
| Remedy: | 1. Replace the PF ENCODER. 2. Replace the PF MOTOR. |
| Error code: | 131B |
| Description: | Head driver (transmission gate) overheat error The temperature of the Head driver rises, and has reached a predetermined limit. |
| Causes: | The temperature of the Head driver rises, and has reached a predetermined limit. |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. |
| Error code: | 13F0 |
| Display: | ENGINE ERR |
| Description: | Engine control failure |
| Causes: | • An undefined malfunction occurs in the engine section (PRCB, etc.). |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. - - 2 Change PRCB. - - 3 Change MFPB. |
| Error code: | 1411 |
| Description: | Pump Cap Unit undetectable error Pump Cap Unit failure |
| Remedy: | Replace the Pump Cap Unit. |
| Error code: | 1412 |
| Description: | Pump life error The number of PUMP CAP UNIT operation has reached the specified limit. (The rotation of the pump motor has reached the specified limit.) |
| Causes: | The number of PUMP CAP UNIT operation has reached the specified limit. (The rotation of the pump motor has reached the specified limit.) |
| Remedy: | Replace the PUMP CAP UNIT , and reset its counter . |
| Error code: | 1419 |
| Description: | Oscillation error The control terminal (Vre terminal) of the pump motor driver has shorted out. |
| Causes: | The control terminal (Vre terminal) of the pump motor driver has shorted out. |
| Remedy: | 1. Remove the foreign material. 2. If the error still occurs, replace the MAIN BOARD. |
| Error code: | 141A |
| Description: | Overload error Overcurrent to the pump motor was detected. • Pump motor encoder cable disconnection • Pump motor cable disconnection • Irregular load • Pump motor encoder failure • Pump motor failure |
| Causes: | Overcurrent to the pump motor was detected. • Pump motor encoder cable disconnection • Pump motor cable disconnection • Irregular load • Pump motor encoder failure • Pump motor failure |
| Remedy: | Replace the pump motor encoder and pump motor . |
| Error code: | 141B |
| Description: | Over speed error The pump motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Pump motor encoder failure • Pump motor driver failure |
| Causes: | The pump motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Pump motor encoder failure • Pump motor driver failure |
| Remedy: | 1. Replace the pump motor encoder . 2. Replace the MAIN BOARD. |
| Error code: | 141C |
| Description: | Reversing error The number of occurrences of reversing the pump motor has reached a predetermined limit. • The polarity of pump motor encoder cable is opposite. • The polarity of pump motor cable is opposite. |
| Causes: | The number of occurrences of reversing the pump motor has reached a predetermined limit. • The polarity of pump motor encoder cable is opposite. • The polarity of pump motor cable is opposite. |
| Remedy: | Replace the pump motor encoder . |
| Error code: | 141D |
| Description: | Driving time-out error Abnormally-long driving duration of the pump motor was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the pump motor was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. the |
| Error code: | 141E |
| Description: | Velocity deviation error The pump motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Pump motor encoder failure • Pump motor failure • Pump motor driver failure |
| Causes: | The pump motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Pump motor encoder failure • Pump motor failure • Pump motor driver failure |
| Remedy: | 1. Replace the pump motor encoder and pump motor . 2. Replace the MAIN BOARD. |
| Error code: | 141F |
| Description: | Lock error The pump motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump motor encoder failure • Pump motor failure |
| Causes: | The pump motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Pump motor encoder failure • Pump motor failure |
| Remedy: | Replace the pump motor encoder and pump motor . |
| Error code: | 1427 |
| Description: | CSIC destination setting error An Ink Cartridge for a wrong destination has been installed. The Ink Holder is not adjusted correctly. |
| Remedy: | Replace the Ink Cartridge with a correct one for this printer. Start the printer in the Serviceman Mode without setting the ink cartridge, and then execute “Ink Holder Adjustment” from the Service Program. |
| Error code: | 1428 |
| Description: | Ink Holder adjustment error The adjustment statuses of the Ink Holder on the left and on the right are not the same. This service call error does not occur for Epson Stylus Pro 7700/7710 /9700/9710. |
| Remedy: | 1. While opening the cover of the Ink Holder (to avoid a service call error from occurring), start the printer in the Serviceman Mode. 2. Execute “Ink Holder Adjustment” from the Service Program. |
| Error code: | 1430 |
| Description: | Holder Ink Pad. Life of the Holder Ink Pad (IC HOLDER life error) |
| Causes: | The number of replacement counter of the ink cartridges has reached the specified life. (the life of the waste ink pad attached to the IC HOLDER) |
| Remedy: | Replace the IC HOLDER. and reset its counter |
| Error code: | 1431 |
| Description: | Suction pump life error The Pump Cap Unit has reached the end of its service life. (The total number of revolutions of the Pump Motor has reached a predetermined limit) |
| Causes: | The number of operation counter of the Ink Selector has reached the specified life. (10,000 times) |
| Remedy: | Replace the Pump Cap Unit and reset the counter . |
| Error code: | 1434 |
| Description: | Self-sealing valve life error The Self-sealing valve has reached the end of its service life. |
| Remedy: | Replace the Self-sealing valve and reset the counter . |
| Error code: | 1438 |
| Description: | Maintenance tank error A Maintenance Tank for a wrong destination has been installed. |
| Remedy: | Replace the Maintenance Tank with a correct one for this printer. |
| Error code: | 1439 |
| Description: | Cap error The home position of the Cap is not detected. |
| Remedy: | Check the connection of the Cap HP Sensor. Replace the Ink System Unit. |
| Error code: | 143A |
| Description: | Overload error The electric current flowing when driving the motor is irregularly large. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure |
| Remedy: | Check the connection between the Ink System Unit and the Main Board Assy. Replace the Ink System Unit. |
| Error code: | 143B |
| Description: | Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure |
| Remedy: | Replace the Ink System Unit. |
| Error code: | 143C |
| Description: | Reversing error Detects that it is being driven in the opposite direction to the specified driving direction. • The polarity of encoder cable is opposite. • The polarity of motor cable is opposite. • Encoder failure • Irregular load |
| Remedy: | Check the connection between the Ink System Unit and the Main Board Assy. Replace the Ink System Unit. |
| Error code: | 143D |
| Description: | Driving time-out error Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control.e P.264) |
| Remedy: | Replace the Main Board Assy. |
| Error code: | 143E |
| Description: | Velocity deviation error Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure |
| Remedy: | Replace the Ink System Unit. Replace the Main Board Assy. |
| Error code: | 143F |
| Description: | Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure |
| Remedy: | Check the connection between the Ink System Unit and the Main Board Assy. Replace the Ink System Unit. |
| Error code: | 144A |
| Description: | Overload error The electric current flowing when driving the motor is irregularly large. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure |
| Remedy: | Check the connection between the Pressurizing Unit and the Main Board Assy. Replace the Pressurizing Unit. |
| Error code: | 144B |
| Description: | Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure |
| Remedy: | Replace the Pressurizing Unit. |
| Error code: | 144C |
| Description: | Reversing error Detects that it is being driven in the opposite direction to the specified driving direction. • The polarity of encoder cable is opposite. • The polarity of motor cable is opposite. • Encoder failure • Irregular load |
| Remedy: | Check the connection between the Pressurizing Unit and the Main Board Assy. Replace the Pressurizing Unit. |
| Error code: | 144D |
| Description: | Driving time-out error. Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board Assy. |
| Error code: | 144E |
| Description: | Velocity deviation error Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure |
| Remedy: | Replace the Pressurizing Unit. Replace the Main Board Assy. |
| Error code: | 144F |
| Description: | Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure |
| Remedy: | Check the connection between the Pressurizing Unit and the Main Board Assy. Replace the Pressurizing Unit. |
| Error code: | 1489 |
| Description: | Wiper error The home position of the Wiper is not detected. |
| Remedy: | Check the connection of the Wiper HP Sensor. Replace the Ink System Unit. |
| Error code: | 148A |
| Description: | Overload error The electric current flowing when driving the motor is irregularly large. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure |
| Remedy: | Check if there is some foreign material causing extra load on the Wiper system. Check the connection between the Ink System Unit and the Main Board Assy. Replace the Ink System Unit. |
| Error code: | 148B |
| Description: | Over speed error Detects that it is being driven at an irregularly faster speed than the specified value just before stopping. • Irregular load • Encoder failure |
| Remedy: | Replace the Ink System Unit. |
| Error code: | 148C |
| Description: | Reversing error Detects that it is being driven in the opposite direction to the specified driving direction. • The polarity of encoder cable is opposite. • The polarity of motor cable is opposite. • Encoder failure • Irregular load |
| Remedy: | Check the connection between the Ink System Unit and the Main Board Assy. Replace the Ink System Unit. |
| Error code: | 148D |
| Description: | Driving time-out error Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board Assy. |
| Error code: | 148E |
| Description: | Velocity deviation error Detects that it is being driven at an irregularly faster speed than the specified value. • Irregular load • Encoder failure • Motor driver failure • Motor failure |
| Remedy: | Replace the Ink System Unit. Replace the Main Board Assy. |
| Error code: | 148F |
| Description: | Lock error Detects that it is being driven at an irregularly slower speed than the specified value. • Encoder cable is damaged. • Motor cable is damaged. • Irregular load • Encoder failure • Motor failure |
| Remedy: | Check the connection between the Ink System Unit and the Main Board Assy. Replace the Ink System Unit. |
| Error code: | 1494 |
| Description: | Ink selector error Ink select operation failed. • Ink Selector Motor is broken. • Ink Selector Sensor is broken. • Ink Selector is overloaded. |
| Causes: | Ink select operation failed. • Ink Selector’s load is abnormal. • Ink Selector Sensor failure • Ink Selector Motor failure |
| Remedy: | Check the connection between the Ink Selector and the Main Board Assy. Replace the Ink Selector. Replace the Main Board Assy. |
| Error code: | 1496 |
| Description: | Ink selector sensor error detection Ink select operation failed. • Ink Selector Sensor is broken. |
| Causes: | Ink select operation failed. • Ink Selector Sensor failure |
| Remedy: | Check the connection between the Ink Selector and the Main Board Assy. Replace the Ink Selector. Replace the Main Board Assy. |
| Error code: | 1497 |
| Description: | Switching time-out error The ink selecting operation does not end even after the specified period of time has passed because the Ink Selector (the sensor or motor) is broken. |
| Causes: | 1. The Ink Selector Motor or the Ink Selector Sensor is not connected correctly. 2. Connection between the SUB Board and the Main Board has an abnormality. 3. Ink selection is not completed after the specified time has passed. • Ink Selector Motor failure • Ink Selector Sensor failure |
| Remedy: | Replace the Ink Selector. |
| Error code: | 149D |
| Description: | Driving time-out error Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Causes: | Detects that the driving period is irregularly long. • Ink Selector irregular load • Firmware becomes out of control. |
| Remedy: | Replace the Main Board Assy. |
| Error code: | 1501 |
| Description: | RTC error |
| Causes: | Replace the controller board if this error is frequent. |
| Remedy: | Check the installation status of the Roller Release HP Sensor. Check the connection between the Roller Release HP Sensor and the Main Board Assy. Replace the Roller Release HP Sensor. |
| Error code: | 150C |
| Description: | PG position undetectable error When changing the PG, the PG SENSOR could not detect the PG position. |
| Causes: | When changing the PG, the PG SENSOR could not detect the PG position. |
| Remedy: | 1. Replace the PG SENSOR. 2. Replace the APG UNIT. 3. Remove any obstacles around the CR UNIT home position. The printer changes the PG with the CR UNIT being at its home position. |
| Error code: | 151A |
| Description: | Overload error Connection failure of the APG motor. • Overcurrent to the APG motor was detected. • APG motor cable is damaged. • Irregular load • APG encoder failure • APG motor failure |
| Causes: | • Connection failure of the APG motor. • Overcurrent to the APG motor was detected. • APG motor cable is damaged. • Irregular load • APG encoder failure • APG motor failure |
| Remedy: | Replace the APG UNIT. |
| Error code: | 151B |
| Description: | Over speed error The APG motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • APG encoder failure • APG motor driver failure |
| Causes: | The APG motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • APG encoder failure • APG motor driver failure |
| Remedy: | 1. Replace APG UNIT. 2. Replace the MAIN BOARD. |
| Error code: | 151C |
| Description: | Reversing error The number of occurrences of reversing the APG motor has reached a predetermined limit. • The polarity of APG motor cable is opposite. • APG motor failure |
| Causes: | The number of occurrences of reversing the APG motor has reached a predetermined limit. • The polarity of APG motor cable is opposite. • APG motor failure |
| Remedy: | Replace APG UNIT. |
| Error code: | 151D |
| Description: | Driving time-out error Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Causes: | Detects that the driving period is irregularly long. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 151E |
| Description: | Velocity deviation error The APG motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • APG encoder failure • APG motor failure • APG motor driver failure |
| Causes: | The APG motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • APG encoder failure • APG motor failure • APG motor driver failure |
| Remedy: | 1. Replace APG UNIT. 2. Replace the MAIN BOARD. |
| Error code: | 151F |
| Description: | Lock error Connection failure of the APG motor. • The APG motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • APG encoder failure • APG motor failure |
| Causes: | • Connection failure of the APG motor. • The APG motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • APG encoder failure • APG motor failure |
| Remedy: | Replace APG UNIT. |
| Error code: | 152A |
| Description: | ROLL Overload error |
| Causes: | • Connection failure of the 1st PAPER FEED MOTOR. • Overcurrent to the1st PAPER FEED MOTOR was detected. • 1st PAPER FEED MOTOR cable is damaged. • Irregular load • 1st PAPER FEED MOTOR Encoder failure • 1st PAPER FEED MOTOR failure |
| Remedy: | Is there any problem such as damaged cable in the connections below? • 1st PAPER FEED MOTOR (1st PAPER FEED MOTOR Encoder) (CN15) Replace the 1st PAPER FEED MOTOR. |
| Error code: | 152B |
| Description: | ROLL Over speed error |
| Causes: | The 1st PAPER FEED MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • 1st PAPER FEED MOTOR Encoder failure • 1st PAPER FEED MOTOR failure |
| Remedy: | 1. Replace the 1st PAPER FEED MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 152C |
| Description: | ROLL Reversing error |
| Causes: | The number of occurrences of reversing the 1st PAPER FEED MOTOR has reached a predetermined limit. • The polarity of 1st PAPER FEED MOTOR encoder cable is opposite. • 1st PAPER FEED MOTOR failure |
| Remedy: | Is there any problem such as damaged cable in the connections below? • 1st PAPER FEED MOTOR (1st PAPER FEED MOTOR Encoder) (CN15) Replace the 1st PAPER FEED MOTOR. |
| Error code: | 152D |
| Description: | ROLL Driving time-out error |
| Causes: | Abnormally-long driving duration of the 1st PAPER FEED MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 152E |
| Description: | ROLL Velocity deviation error |
| Causes: | The1st PAPER FEED MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • 1st PAPER FEED MOTOR Encoder failure • 1st PAPER FEED MOTOR failure • 1st PAPER FEED MOTOR Driver failure |
| Remedy: | 1. Replace the 1st PAPER FEED MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 152F |
| Description: | ROLL Lock error |
| Causes: | • Connection failure of the 1st PAPER FEED MOTOR or the CR ENCODER. • The 1st PAPER FEED MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • 1st PAPER FEED MOTOR Encoder failure • 1st PAPER FEED MOTOR failure |
| Remedy: | Is there any problem such as damaged cable in the connections below? • 1st PAPER FEED MOTOR (1st PAPER FEED MOTOR Encoder) to MAIN BOARD (CN15). Replace the 1st PAPER FEED MOTOR. |
| Error code: | 1530 |
| Description: | PF heater 2 high temperature error (paper feeder 2) A temperature higher than 75C/167F is detected. |
| Causes: | Defective connector cable or poor contact in the connector. Shorted PF thermistor 2. Defective PF fan motor 2. Defective PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF fan motor 2 and PF main PWB (YC111) Shorted PF thermistor 2. Replace the side heater unit (Refer to the service manual for the paper feeder). Defective PF fan motor 2. Replace the side heater unit (Refer to the service manual for the paper feeder). Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1536 |
| Description: | Pressurizing reset error The pressurizing cannot be reset. The Pressure Sensor remains on, even after the pressurizing has been reset. |
| Remedy: | Replace the Pressurizing Unit. |
| Error code: | 1537 |
| Description: | Pressurizing error The motor driving does not end even after the specified period of time has passed. |
| Remedy: | Check the connection of the Pressurizing Unit. Check the connection of the Pressure tubes. Replace the Pressurizing Unit. |
| Error code: | 153A |
| Description: | Overload error Overcurrent to the PRESSURE ROLLER MOTOR was detected. • PRESSURE ROLLER SENSOR cable is damaged. • PRESSURE ROLLER MOTOR cable is damaged. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure |
| Causes: | Overcurrent to the PRESSURE ROLLER MOTOR was detected. • PRESSURE ROLLER SENSOR cable is damaged. • PRESSURE ROLLER MOTOR cable is damaged. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure |
| Remedy: | Replace the PRESSURE ROLLER MOTOR. |
| Error code: | 153B |
| Description: | Over speed error The PRESSURE ROLLER MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • PRESSURE ROLLER SENSOR failure • PRESSURE ROLLER MOTOR driver failure |
| Causes: | The PRESSURE ROLLER MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • PRESSURE ROLLER SENSOR failure • PRESSURE ROLLER MOTOR driver failure |
| Remedy: | 1. Replace the PRESSURE ROLLER SENSOR. 2. Replace the MAIN BOARD. |
| Error code: | 153C |
| Description: | Reversing error The number of occurrences of reversing the PRESSURE ROLLER MOTOR has reached a predetermined limit. • The polarity of PRESSURE ROLLER MOTOR encoder cable is opposite. • The polarity of PRESSURE ROLLER MOTOR cable is opposite. |
| Causes: | The number of occurrences of reversing the PRESSURE ROLLER MOTOR has reached a predetermined limit. • The polarity of PRESSURE ROLLER MOTOR encoder cable is opposite. • The polarity of PRESSURE ROLLER MOTOR cable is opposite. |
| Remedy: | Replace the PRESSURE ROLLER MOTOR encoder cable/ PRESSURE ROLLER MOTOR. |
| Error code: | 153D |
| Description: | Driving time-out error Abnormally-long driving duration of the PRESSURE ROLLER MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the PRESSURE ROLLER MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 153E |
| Description: | Velocity deviation error The PRESSURE ROLLER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure • PRESSURE ROLLER MOTOR driver failure |
| Causes: | The PRESSURE ROLLER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure • PRESSURE ROLLER MOTOR driver failure |
| Remedy: | 1. Replace the PRESSURE ROLLER MOTOR encoder cable/PRESSURE ROLLER MOTOR. 2. Replace the MAIN BOARD. |
| Error code: | 153F |
| Description: | Lock error The PRESSURE ROLLER MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure |
| Causes: | The PRESSURE ROLLER MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • PRESSURE ROLLER MOTOR encoder failure • PRESSURE ROLLER MOTOR failure |
| Remedy: | Replace the PRESSURE ROLLER MOTOR encoder cable/ PRESSURE ROLLER MOTOR. |
| Error code: | 1540 |
| Description: | PF heater 1 high temperature error (paper feeder 3) A temperature higher than 75C/167F is detected. |
| Causes: | Defective connector cable or poor contact in the connector. Shorted PF thermistor 1. Defective PF fan motor 1. Defective PF main PWB. |
| Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF fan motor 1 and PF main PWB (YC111) Shorted PF thermistor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF fan motor 1. Replace the top heater unit (Refer to the service manual for the paper feeder). Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 1541 |
| Description: | Cutter return error |
| Causes: | The Cutter cannot return to its home position. • Slipping of the teeth of the Cutter Timing Belt • CUTTER HOME POSITION SENSOR failure |
| Remedy: | TBD |
| Error code: | 1549 |
| Description: | Motor disconnection error |
| Causes: | • Connection between the SUB-B BOARD and the MAIN BOARD has an abnormality. • The CUTTER UNIT operation is not detected. • Irregular load • CUTTER MOTOR Assy cable is damaged. • CUTTER MOTOR ENCORDER failure. • CUTTER MOTOR failure |
| Remedy: | TBD |
| Error code: | 154A |
| Description: | Overload error Overcurrent to the cutter motor was detected. • Cutter motor encoder cable is damaged. • Cutter motor cable is damaged. • Irregular load • Cutter motor encoder failure • Cutter motor failure |
| Causes: | Overcurrent to the CUTTER MOTOR was detected. • CUTTER MOTOR ENCORDER cable is damaged. • CUTTER MOTOR cable is damaged. • Irregular load • CUTTER MOTOR ENCORDER failure • CUTTER MOTOR failure |
| Remedy: | Replace the cutter motor/cutter motor encoder (CUTTER UNIT). |
| Error code: | 154B |
| Description: | Over speed error The cutter motor was driven at a speed faster than a predetermined one during deceleration. • Irregular load • Cutter motor encoder failure • Cutter motor driver failure |
| Causes: | The CUTTER MOTOR was driven at a speed faster than a predetermined one during deceleration. • Irregular load • CUTTER MOTOR ENCORDER failure • CUTTER MOTOR driver failure |
| Remedy: | 1. Replace the cutter motor encoder (CUTTER UNIT). 2. Replace the SUB-B BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 154C |
| Description: | Reversing error The number of occurrences of reversing the cutter motor has reached a predetermined limit. • The polarity of cutter motor encoder cable is opposite. • The polarity of cutter motor cable is opposite. |
| Causes: | The number of occurrences of reversing the CUTTER MOTOR has reached a predetermined limit. • The polarity of CUTTER MOTOR ENCORDER cable is opposite. • The polarity of CUTTER MOTOR cable is opposite. |
| Remedy: | Replace the cutter motor/cutter motor encoder (CUTTER UNIT). |
| Error code: | 154D |
| Description: | Driving time-out error Abnormally-long driving duration of the cutter motor was detected. • Irregular load • Firmware becomes out of control. |
| Causes: | Abnormally-long driving duration of the CUTTER MOTOR was detected. • Irregular load • Firmware becomes out of control. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 154E |
| Description: | Velocity deviation error The cutter motor was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • Cutter motor encoder failure • Cutter motor failure • Cutter motor driver failure |
| Causes: | The CUTTER MOTOR was driven at a speed abnormally faster than a predetermined one during acceleration or deceleration. • Irregular load • CUTTER MOTOR ENCORDER failure • CUTTER MOTOR failure • CUTTER MOTOR driver failure |
| Remedy: | 1. Replace the cutter motor encoder (CUTTER UNIT). 2. Replace the SUB-B BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 154F |
| Description: | Lock error The cutter motor was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • Cutter motor encoder failure • Cutter motor failure |
| Causes: | The CUTTER MOTOR was driven at a speed abnormally slower than a predetermined one during operation. • Irregular load • CUTTER MOTOR ENCORDER failure • CUTTER MOTOR failure |
| Remedy: | Replace the cutter motor/cutter motor encoder (CUTTER UNIT). |
| Error code: | 1551 |
| Description: | Paper Thickness Sensor error |
| Causes: | • During detection of paper thickness, the thickness cannot be determined because the sensor is not stable due to vibration or the like. • The PAPER THICKNESS SENSOR is damaged and cannot detect the paper thickness correctly. |
| Remedy: | TBD |
| Error code: | 1561 |
| Description: | Paper thickness at power-on error |
| Causes: | At power-on, the PAPER THICKNESS SENSOR detects more than 2.2mm paper thickness. |
| Remedy: | TBD |
| Error code: | 1800 |
| Description: | Paper feeder communication error A communication error from paper feeder is detected 10 times in succession. |
| Causes: | Improper installation paper feeder. Defective connector cable or poor contact in the connector. Defective engine PWB. Defective PF main PWB. |
| Remedy: | Paper feeder Check the wiring connection status with the main unit and, if necessary, try connecting it again. PF main PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF main PWB (YC13) and Engine PWB (YC19) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the PF main PWB (Refer to the service manual for the paper feeder). Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 1A23 |
| Description: | Incorrect RTC data error The various absolute time settings stored on the NVRAM are abnormal. |
| Causes: | The various absolute time settings stored on the NVRAM are abnormal. |
| Remedy: | If the error still occurs after resetting the date and time, perform the followings. 1. Replace the RTC backup battery. 2. Replace the MAIN BOARD. |
| Error code: | 1A26 |
| Description: | RTC Access T/O error The RTC circuit on the MAIN BOARD malfunctions |
| Causes: | The RTC circuit on the MAIN BOARD malfunctions. |
| Remedy: | 1. Turn the power off and remove the RTC backup battery. 2. After several seconds, re-attach the battery and turn the power back on. 3. Reset the date and time settings of the RTC using the Service Program. |
| Error code: | 1A37 |
| Description: | Thermistor error The HEAD FFC is not connected correctly. • A temperature out of a predetermined range was detected by the Head thermistor. • Head thermistor failure |
| Causes: | • The HEAD FFC is not connected correctly. • A temperature out of a predetermined range was detected by the Head thermistor. • Head thermistor failure |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. |
| Error code: | 1A38 |
| Description: | Transistor environmental temperature error Transistor failure • A temperature out of a predetermined range was detected by the Head thermistor. |
| Causes: | • Transistor failure • A temperature out of a predetermined range was detected by the Head thermistor. |
| Remedy: | Replace the PRINT HEAD. |
| Error code: | 1A39 |
| Description: | Head error Connection failure of the HEAD FFC. • Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle. • The drive circuit in the PRINT HEAD is damaged. • The fuse of the MAIN BOARD has blown. |
| Causes: | • Connection failure of the HEAD FFC. • Electric parts or components are damaged due to improper HEAD FFC connection such as connecting it at an angle. • The drive circuit in the PRINT HEAD is damaged. • The fuse of the MAIN BOARD has blown. |
| Remedy: | 1. Replace the HEAD FFC. 2. Replace the PRINT HEAD. 3. Replace the MAIN BOARD. |
| Error code: | 1A40 |
| Description: | IC22 error The destination is wrong. |
| Remedy: | Configure the destination again. |
| Error code: | 1A41 |
| Description: | Head rank ID input error An invalid Head rank ID was written to the NVRAM. |
| Causes: | An invalid Head rank ID was written to the NVRAM. |
| Remedy: | Rewrite the Head rank ID with a correct one. |
| Error code: | 1A50 |
| Description: | I2C communication error (Between elements on ASIC and MAIN) An I2C communication error has occurred in the MAIN BOARD |
| Causes: | An I2C communication error has occurred in the MAIN BOARD. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 1A51 |
| Description: | I2C communication error (Between elements on ASIC and SUB) An I2C communication error between the MAIN BOARD and SUB BOARD has occurred. |
| Causes: | An I2C communication error between the MAIN BOARD and SUB BOARD has occurred. |
| Remedy: | 1. Replace the FFC between the MAIN BOARD and SUB BOARD. 2. Replace the SUB BOARD. 3. Replace the MAIN BOARD. |
| Error code: | 1A52 |
| Description: | I2C communication error (Between elements on ASIC and SUB-B) Communication error. |
| Remedy: | 1. Check the connection between the Sub Board Assy and the Main Board Assy if the FFC is connected correctly (no slant connection exists). Correct it if any abnormality exists. 2. If the printer does not recover from the error after trying 1, replace the FFC between the Sub Board Assy and the Main Board Assy. 3. If the printer does not recover from the error even after trying 2, replace the Sub Board Assy. |
| Error code: | 1A53 |
| Description: | I2C communication error (Between elements on ASIC and SUB-C) Communication error. |
| Remedy: | 1. Check the connection between the Sub Board Assy and the Main Board Assy if the FFC is connected correctly (no slant connection exists). Correct it if any abnormality exists. 2. If the printer does not recover from the error after trying 1, replace the FFC between the Sub Board Assy and the Main Board Assy. 3. If the printer does not recover from the error even after trying 2, replace the Sub Board Assy. |
| Error code: | 2000 |
| Description: | DDA Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 2002 |
| Description: | Printer controller: FGATE error Printer application returned FGATE error notification to copier. |
| Causes: | • FGATE error |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 2003 |
| Description: | FLASH BOOT SUM CHECK error Installing the firmware has failed. • The Flash ROM is out of order. |
| Causes: | • Installing the firmware has failed. • The Flash ROM is out of order. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
| Error code: | 200A |
| Display: | Paper size not detected. Press Load/Eject and reload the paper. Paper size not detected. Reload paper. Paper size not detected. Press OK and reload the paper. |
| Description: | F/W load error Reading/decompressing the firmware has failed. |
| Causes: | Reading / decompressing the firmware has failed. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
| Error code: | 200D |
| Description: | System interrupt watchdog time-out error A system failure such as CPU failure, or defective cash has occurred. |
| Causes: | A system failure such as CPU failure, or defective cash has occurred. |
| Remedy: | Replace the MAIN BOARD. |
| Error code: | 200E |
| Display: | This paper cannot be used. Check supported paper sizes. This paper cannot be used. Check supported paper sizes. Load/Eject: Change Paper |
| Description: | Unknown NMI The CPU has detected an unknown NMI. |
| Remedy: | Replace the Main Board Assy. |
| Error code: | 2010 |
| Display: | Paper loaded askew. Press Load/Eject and reload the paper. |
| Description: | Main motor startup error Main motor is not stabilized within 1 s since the motor is activated. |
| Causes: | Main motor. Engine PWB |
| Remedy: | Main motor 1. To check the motor operation execute U030 Main (main motor). 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Main motor and Engine PWB (YC13) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the main motor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 3000 |
| Description: | Main Motor`s failure to turn • The Motor Lock signal remains HIGH for a predetermined continuous period of time while the Motor is turning. |
| Causes: | The AC power has been shut off due to a power failure, unplugged, PSH BOARD failure, or MAIN BOARD failure or the like. |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PWB-M connector for proper connection and correct as necessary. 4 M1 operation check PWB-M CNDM1-5 (REM) PWB-M CNDM1-8 (LOCK) K to L-2. 5 Change PWB-M. 6 Change PU1. |
| Error code: | D131 |
| Description: | AID error AID function is not working. |
| Remedy: | Perform the AID Function check. |
| Error code: | Dxxx |
| Description: | Debug error This is a debug error that occurs at product development. In principle, it does not occur for mass-produced products; however, it might occur due to unexpected causes such as external noises. |
| Remedy: | 1. Restart the printer. If the error does not occur, observe the printer for recurrence. 2. Re-install the firmware. 3. Replace the Main Board Assy. |
| Error code: | Fxxx |
| Description: | CPU related service call There is something wrong with the firmware |
| Causes: | There is something wrong with the firmware. |
| Remedy: | 1. Re-install the firmware. 2. Replace the MAIN BOARD. |
