Epson WorkForce WF-2520

Рейтинг

Снят с производства

Тип устройства

МФУ

Технология печати

пьезоэлектрическая струйная

Макс. формат

Число страниц в месяц

3000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Область применения	персональный
Число страниц в месяц	3 000
Факс
Печать фотографий
Технология печати	пьезоэлектрическая струйная
Копир
Сканер
Тип устройства	МФУ
Тип	струйный
Размещение	настольный
Цветность печати	цветная
Макс. формат	A4
Телефон
Принтер
Пигментные чернила
Прямая печать
Печать без полей
Система непрерывной подачи чернил
Двусторонняя печать
Количество цветов	4
Мин, объем капли	3 пл
Время цветной печати 10x15 см	38
Макс, разрешение для ч/б печати
По X	5 760
По Y	1 440
Скорость ч/б печати
A4	34
Копир
Макс, количество копий за цикл	99
Значение масштаба
Минимальное	0,25
Максимальное	4
Макс, разрешение (ч/б)
По X	200
Скорость ч/б копирования
A4	18
Сканер
Тип датчика сканера	контактный (CIS)
Тип сканера	планшетный/протяжный
Емкость устройства автоподачи оригиналов	30
Глубина цвета	48 бит
Макс. формат оригинала	A4
Устройство автоподачи оригиналов	одностороннее
Отправка изображения по e-mail
Слайд-адаптер
Стандарт TWAIN
Стандарт WIA
Макс, размер сканирования
По X	216
По Y	356
Разрешение сканера
По Х	1 200
По Y	2 400
По Y (улучшенное)	9 600
По Х (улучшенное)	9 600
Расходные материалы
Количество картриджей	4
Ресурс цветного картриджа/тонера	165
Ресурс ч/б картриджа/тонера	175
Печать на:
Карточках
Матовой бумаге
Конвертах
Пленках
Этикетках
Фотобумаге
Глянцевой бумаге
CD/DVD
Рулоне
Плотность бумаги
Минимальная	64
Максимальная	95
Факс
Память	180
Макс, скорость передачи данных	33,6 Кбит/с
PC Fax
Цветной
Макс, разрешение
По Y	200
Телефон
Проводная трубка
АОН
Caller ID
Автоответчик
Спикерфон
Стандарт DECT
Беспроводная трубка
Языки управления
PostScript
PDF
PCL 5e
PCL 5c
PostScript 2
PostScript 3
PPDS
PCL 6
Подача бумаги
Стандартная	100
Максимальная	100
Финишер
Сортировка со сдвигом
Брошюровщик
Сортер
Электронная сортировка
Степлер
Интерфейсы
Ethernet (RJ-45)
USB
RS-232
FireWire (IEEE 1394)
Wi-Fi
Wi-Fi 802.11n
Bluetooth
LPT
AirPrint
Инфракрасный порт
Устройство для чтения карт памяти
Веб-интерфейс
Версия USB	2,0
Дополнительная информация
Работа от аккумулятора
Экран
Поддержка ОС
Windows
Mac OS
Linux
DOS
Потребляемая мощность
В режиме ожидания	4
При работе	9
Уровень шума
При работе	38
Габариты
Вес	5,9
Ширина	392
Высота	221
Глубина	377

Модули

SC-011

CASE-012

ELEC-011

MECH-013

Детали SC-011

Деталь:	SCANNER UNIT,FD,ASP
Парткод:	1588767

Деталь:	COVER,ASF
Парткод:	1590188

Деталь:	ADF UNIT
Парткод:	1595263

Деталь:	PAPER SUPPORT ADF ASSY.,SEC
Парткод:	1585900

Деталь:	ADF COVER ASSY.,SEC
Парткод:	1585896

Деталь:	PAD ADF ASSY.,SEC
Парткод:	1585902

Деталь:	BEVEL GEAR SHAFT,10.4
Парткод:	1574388

Деталь:	COMBINATION GEAR,24,9.6
Парткод:	1574387

Деталь:	INK CART.UNBOXED,BK,PIGT
Парткод:	1585218

Деталь:	INK CART.UNBOXED,C,PIGT
Парткод:	1585219

Деталь:	INK CART.UNBOXED,M,PIGT
Парткод:	1585220

Деталь:	INK CART.UNBOXED,Y,PIGT
Парткод:	1585221

Деталь:	GREASE G-45
Парткод:	1033657

Деталь:	SONIC TENSION METER U507
Парткод:	1294120

Деталь:	GREASE G-74
Парткод:	1409257

Деталь:	I/P,DPIC009BSP,110,PRINTING
Парткод:	1462531

Деталь:	GREASE G-71(BLUE)
Парткод:	1480655

Деталь:	SHIPPING CLEANING LIQUID,CR06A,1kg
Парткод:	6104713

Деталь:	SHIPPING CLEANING LIQUID,CR06A, 18kg
Парткод:	6104714

Коды ошибок

01H

02H

03H

04H

08H

09H

0AH

10H

14H

20H

36H

40H

41H

42H

43H

50H

56H

5BH

80H

83H

88H

89H

B0H ... CFH

D1H

D2H

D3H

D4H

F1H

F2H

F3H

F4H

F8H

F9H

FAH

Описание

Парткод

Название

EPSON 16Bk/T1621 Картридж черный

EPSON 16C/T1622 Картридж голубой

EPSON 16M/T1623 Картридж пурпурный

EPSON 16Y/T1624 Картридж желтый

EPSON 16MP/T1626 Набор картриджей T1621-T1624

EPSON 16XLBk/T1631 Картридж черный

EPSON 16XLC/T1632 Картридж голубой

EPSON 16XLM/T1633 Картридж пурпурный

EPSON 16XLY/T1634 Картридж желтый

EPSON 16XLMP/T1636 Набор XL картриджей T1631-T1634

Деталь:	POROUS PAD,PAPER GUIDE, FRONT, LOWER
Парткод:	1556085

Error code:	01H
Description:	ADF PID excess speed (Printer)
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure)
Remedy:	• Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board

Error code:	02H
Description:	ADF PID reverse (Printer)
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam
Remedy:	• Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board

Error code:	03H
Description:	ADF PID lock (Printer)
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection

Error code:	04H
Description:	Printer control board malfunction • Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out.
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB.

Error code:	08H
Description:	Main motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the main motor remains energized. • The motor lock signal remains LOW for a predetermined consecutive period of time while the main motor remains deenergized.
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1.

Error code:	09H
Description:	Printer: CR load position excess speed error
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt

Error code:	0AH
Description:	Printer: CR load position excess load error
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection
Remedy:	• Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board

Error code:	10H
Description:	Polygon motor malfunction • A low motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period of time while the polygon motor remains energized.
Causes:	• CIS Unit failure • Scanner Housing failure • Main Board failure
Remedy:	1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB.

Error code:	14H
Description:	2nd image transfer pressure /retraction failure • The state of the retraction position sensor/2nd image transfer is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/2nd image transfer is in the unblocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/2nd image transfer is not blocked (roller in the retracted position) within a predetermined period of time after the retraction sequence of the 2nd transfer roller has been started. • The retraction position sensor/2nd image transfer is not unblocked (roller in the pressed position) within a predetermined period of time after the pressure sequence of the 2nd transfer roller has been started.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Pickup Motor failure • Pickup drive mechanism (2nd cassette) overload (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SD4 connector for proper connection and correct as necessary. 4 Check the PRCB connector for proper connection and correct as necessary. 5 PS5 sensor check. PRCB PJ14PRCB-3 (ON) J to K-3. 6 SD4 operation check. PRCB PJ11PRCB-2 (REM) J to K-1. 7 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 8 Change PRCB.

Деталь:	HOUSING,RIGHT
Парткод:	1572581

Деталь:	HOUSING,LEFT
Парткод:	1572580

Деталь:	HOUSING,FRONT
Парткод:	1572579

Деталь:	COVER,REAR
Парткод:	1548609

Error code:	20H
Description:	LED light failure (Printer)
Causes:	• CIS Unit failure • Main Board failure

Error code:	36H
Description:	Paper jam error (Printer)
Causes:	• Paper jam • Foreign objec

Error code:	40H
Description:	Printer: Transistor temperature error
Causes:	• Main Board failure
Remedy:	• Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC

Error code:	41H
Description:	FB PID excess speed (Printer)
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure)
Remedy:	• Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC

Error code:	42H
Description:	FB PID reverse (Printer)
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam
Remedy:	• Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC

Error code:	43H
Description:	FB PID lock (Printer)
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection
Remedy:	• Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC

Error code:	50H
Description:	Printer: Home position error
Causes:	• Paper jam • Foreign object • Deformation of the Main Frame
Remedy:	See Remedy for DC error (CR motor)

Error code:	56H
Description:	Printer: Contact error at ink replacement timing (Power-off)
Causes:	• Paper jam • Foreign object • Deformation of the Main Frame
Remedy:	See Remedy for DC error (CR motor)

Error code:	5BH
Description:	Printer: Insoluble paper jam error
Causes:	• Paper jam • Foreign object

Error code:	80H
Description:	Printer: Circuit error (include blowout of a fuse)
Causes:	• Main Board failure