Epson XP510
Рейтинг
Модули
MECH-012
MECH-024
SC-011
CASE-013
ELEC-011
Детали SC-011
| Деталь: | FOOT |
| Парткод: | 1572503 |
| Деталь: | HINGE,ASSEMBLY,SC |
| Парткод: | 1603890 |
| Деталь: | PAPER GUIDE,FRAME,BANK,, B, ASSY, IEI |
| Парткод: | 1647926 |
| Деталь: | DUPLEX,UNIT,B, I |
| Парткод: | 1645826 |
| Деталь: | COVER,MSF,MC |
| Парткод: | 1572221 |
| Деталь: | FRAME,MSF, C, ASSY |
| Парткод: | 1611228 |
| Деталь: | TRAY,POROUS PAD,INK EJECT ASSY |
| Парткод: | 1612118 |
| Деталь: | INK,SYSTEM ASSY |
| Парткод: | 1612121 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1436642 |
| Деталь: | POROUS PAD,INK EJECT,IS,LOWER |
| Парткод: | 1573556 |
| Деталь: | CASSETTE ASSY, B, IEI,ASP |
| Парткод: | 1695370 |
| Деталь: | COVER,CASSETTE |
| Парткод: | 1572170 |
| Деталь: | STACKER,MAIN, C |
| Парткод: | 1640384 |
| Деталь: | TORSION SPRING,25.39,LEFT |
| Парткод: | 1572243 |
| Деталь: | HOLDER,STAR WHEEL ASSY |
| Парткод: | 1612102 |
| Деталь: | TORSION SPRING,44.24,RIGHT |
| Парткод: | 1572244 |
| Деталь: | TORSION SPRING,5.1 |
| Парткод: | 1571772 |
| Деталь: | PAPER GUIDE,FRONT,, CE77, ASSY, IEI |
| Парткод: | 1663329 |
| Деталь: | COVER,CLIP, B |
| Парткод: | 1607102 |
| Деталь: | POROUS PAD,PAPER GUIDE,LOWER |
| Парткод: | 1571762 |
| Деталь: | SCALE,CR, B |
| Парткод: | 1611329 |
| Деталь: | COVER,CR,FRONT |
| Парткод: | 1572225 |
| Деталь: | CONNECTOR,CSIC, D, ASSY |
| Парткод: | 1614566 |
| Деталь: | CABLE HEAD, ASSY, ASP |
| Парткод: | 1620185 |
| Деталь: | GUIDE,IC, B |
| Парткод: | 1611533 |
| Деталь: | COVER,FFC ASSY, ASP |
| Парткод: | 1589857 |
| Деталь: | ENCODER,PF, E ASSY |
| Парткод: | 1638191 |
| Деталь: | HOLDER,CAM ASSY |
| Парткод: | 1577835 |
| Деталь: | PAPER GUIDE,UPPER,INNER, B, ASSY |
| Парткод: | 1612525 |
| Деталь: | PAPER GUIDE,UPPER,OUTER ASSY |
| Парткод: | 1577851 |
| Деталь: | FRAME,PICKUP UNIT, C |
| Парткод: | 1612099 |
| Деталь: | SPUR GEAR,14.4, B |
| Парткод: | 1607398 |
| Деталь: | SPUR GEAR,17.6, B |
| Парткод: | 1607397 |
| Деталь: | DUAL ONE WAY CLUTCH, C, ASSY |
| Парткод: | 1616336 |
| Деталь: | SHAFT,DRIVE,PICKUP |
| Парткод: | 1572152 |
| Деталь: | CABLE,ENCODER, B |
| Парткод: | 2144455 |
| Деталь: | CABLE,CRCM, B |
| Парткод: | 2144454 |
| Деталь: | CR CONTACT MODULE |
| Парткод: | 2140849 |
| Деталь: | FOOT |
| Парткод: | 1572503 |
| Деталь: | HINGE,ASSEMBLY,SC |
| Парткод: | 1603890 |
| Деталь: | PAPER GUIDE,FRAME,BANK,, B, ASSY, IEI |
| Парткод: | 1647926 |
| Деталь: | DUPLEX,UNIT,B, I |
| Парткод: | 1645826 |
| Деталь: | COVER,MSF,MC |
| Парткод: | 1572221 |
| Деталь: | FRAME,MSF, C, ASSY |
| Парткод: | 1611228 |
| Деталь: | TRAY,POROUS PAD,INK EJECT ASSY |
| Парткод: | 1612118 |
| Деталь: | INK,SYSTEM ASSY |
| Парткод: | 1612121 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1436642 |
| Деталь: | POROUS PAD,INK EJECT,IS,LOWER |
| Парткод: | 1573556 |
| Деталь: | CASSETTE ASSY, B, IEI,ASP |
| Парткод: | 1695370 |
| Деталь: | COVER,CASSETTE |
| Парткод: | 1572170 |
| Деталь: | STACKER,MAIN, C |
| Парткод: | 1640384 |
| Деталь: | TORSION SPRING,25.39,LEFT |
| Парткод: | 1572243 |
| Деталь: | HOLDER,STAR WHEEL ASSY |
| Парткод: | 1612102 |
| Деталь: | TORSION SPRING,44.24,RIGHT |
| Парткод: | 1572244 |
| Деталь: | TORSION SPRING,5.1 |
| Парткод: | 1571772 |
| Деталь: | PAPER GUIDE,FRONT,, CE77, ASSY, IEI |
| Парткод: | 1663329 |
| Деталь: | COVER,CLIP, B |
| Парткод: | 1607102 |
| Деталь: | POROUS PAD,PAPER GUIDE,LOWER |
| Парткод: | 1571762 |
| Деталь: | SCALE,CR, B |
| Парткод: | 1611329 |
| Деталь: | COVER,CR,FRONT |
| Парткод: | 1572225 |
| Деталь: | CONNECTOR,CSIC, D, ASSY |
| Парткод: | 1614566 |
| Деталь: | CABLE HEAD, ASSY, ASP |
| Парткод: | 1620185 |
| Деталь: | GUIDE,IC, B |
| Парткод: | 1611533 |
| Деталь: | COVER,FFC ASSY, ASP |
| Парткод: | 1589857 |
| Деталь: | ENCODER,PF, E ASSY |
| Парткод: | 1638191 |
| Деталь: | HOLDER,CAM ASSY |
| Парткод: | 1577835 |
| Деталь: | PAPER GUIDE,UPPER,INNER, B, ASSY |
| Парткод: | 1612525 |
| Деталь: | PAPER GUIDE,UPPER,OUTER ASSY |
| Парткод: | 1577851 |
| Деталь: | FRAME,PICKUP UNIT, C |
| Парткод: | 1612099 |
| Деталь: | SPUR GEAR,14.4, B |
| Парткод: | 1607398 |
| Деталь: | SPUR GEAR,17.6, B |
| Парткод: | 1607397 |
| Деталь: | DUAL ONE WAY CLUTCH, C, ASSY |
| Парткод: | 1616336 |
| Деталь: | SHAFT,DRIVE,PICKUP |
| Парткод: | 1572152 |
| Деталь: | CABLE,ENCODER, B |
| Парткод: | 2144455 |
| Деталь: | CABLE,CRCM, B |
| Парткод: | 2144454 |
| Деталь: | CR CONTACT MODULE |
| Парткод: | 2140849 |
| Деталь: | PRINT HEAD,ID284V-M1 |
| Парткод: | FA09070 |
| Деталь: | PAD,SHEET,CR |
| Парткод: | 5130574 |
| Деталь: | PAD,CR, B |
| Парткод: | 5130846 |
| Деталь: | STRONG TAPE N0.388 BLUE |
| Парткод: | 1032813 |
| Деталь: | GREASE G-45 |
| Парткод: | 1033657 |
| Деталь: | GREASE G-74 |
| Парткод: | 1409257 |
| Деталь: | GREASE G-72 |
| Парткод: | 1409258 |
| Деталь: | PFP BASE SCALE |
| Парткод: | 1453980 |
| Деталь: | SHEET ,CD,DUMMY, TEST |
| Парткод: | 1455600 |
| Деталь: | I/P,DPIC009BSP,110,PRINTING |
| Парткод: | 1462531 |
| Деталь: | GREASE G-71(BLUE) |
| Парткод: | 1480655 |
| Деталь: | GREASE,G-94 |
| Парткод: | 1561125 |
| Деталь: | GREASE,G-96 (40g) |
| Парткод: | 1590700 |
| Деталь: | Shipping Cleaning Liquid,CR02,18kg |
| Парткод: | 6022798 |
| Деталь: | Shipping Cleaning Liquid,CR02,1kg |
| Парткод: | 6022805 |
| Деталь: | SCANNER UNIT, CD65, E, IEI,ASP |
| Парткод: | 2176049 |
| Деталь: | COVER DOCUMENT ASSY |
| Парткод: | 1612002 |
| Деталь: | POWER CABLE |
| Парткод: | 2107708 |
| Деталь: | INK CART.UNBOXED,BK,PIGT, 764CMEC,260,AS |
| Парткод: | 1645685 |
| Деталь: | INK CART.UNBOXED,PBK,DYE, 764CM,EC,261,A S |
| Парткод: | 1645686 |
| Деталь: | INK CART.UNBOXED,C,DYE, 764CM,EC,261,AS |
| Парткод: | 1645687 |
| Деталь: | INK CART.UNBOXED,M,DYE, 764CM,EC,261,AS |
| Парткод: | 1645688 |
| Деталь: | INK CART.UNBOXED,Y,DYE, 764CM,EC,261,AS |
| Парткод: | 1645689 |
| Деталь: | HOUSING,LOWER,LEFT, B, ASSY |
| Парткод: | 1612115 |
| Деталь: | HOUSING,UPPER, B |
| Парткод: | 1608017 |
| Деталь: | HOUSING,FRONT,LOWER,LEFT, B |
| Парткод: | 1610144 |
| Деталь: | FRAME,BASE,LEFT,ASSY, ASP, E, IEI |
| Парткод: | 1637509 |
| Деталь: | FRAME,BASE,RIGHT, D, ASSY, ASP |
| Парткод: | 1599819 |
| Деталь: | FRAME PANEL, CD65 ASSY |
| Парткод: | 1612114 |
| Деталь: | HOUSING,FRONT, B |
| Парткод: | 1608018 |
| Деталь: | HOUSING,FRONT,LOWER,RIGHT |
| Парткод: | 1574155 |
| Деталь: | STRONG TAPE N0.388 BLUE |
| Парткод: | 1032813 |
| Деталь: | GREASE G-45 |
| Парткод: | 1033657 |
| Деталь: | GREASE G-74 |
| Парткод: | 1409257 |
| Деталь: | GREASE G-72 |
| Парткод: | 1409258 |
| Деталь: | PFP BASE SCALE |
| Парткод: | 1453980 |
| Деталь: | SHEET ,CD,DUMMY, TEST |
| Парткод: | 1455600 |
| Деталь: | I/P,DPIC009BSP,110,PRINTING |
| Парткод: | 1462531 |
| Деталь: | GREASE G-71(BLUE) |
| Парткод: | 1480655 |
| Деталь: | GREASE,G-94 |
| Парткод: | 1561125 |
| Деталь: | GREASE,G-96 (40g) |
| Парткод: | 1590700 |
| Деталь: | Shipping Cleaning Liquid,CR02,18kg |
| Парткод: | 6022798 |
| Деталь: | Shipping Cleaning Liquid,CR02,1kg |
| Парткод: | 6022805 |
| Деталь: | MAIN BOARD ASSY, CD65, B, IEI |
| Парткод: | 1619148 |
| Деталь: | HARNESS |
| Парткод: | 2142559 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2153474 |
| Деталь: | WIRELESS LAN USB MODULE |
| Парткод: | 2171673 |
| Деталь: | BOARD ASSY.,POWER SUPPLY |
| Парткод: | 2152431 |
| Деталь: | SCANNER UNIT, CD65, E, IEI,ASP |
| Парткод: | 2176049 |
| Деталь: | COVER DOCUMENT ASSY |
| Парткод: | 1612002 |
Коды ошибок
01H
02H
03H
05H
06H
10H
11H
20H
36H
41H
42H
43H
45H
46H
49H
4AH
4BH
4DH
4EH
60H
65H
83H
88H
89H
8DH
93H
94H
95H
9AH
9BH
9CH
9DH
9EH
B9H
BAH
C0H
C1H
C3H
D1H
D2H
D3H
D4H
D8H
D9H
DAH
DEH
DFH
E1H
E2H
E3H
E4H
E5H
E8H
E9H
EAH
EEH
EFH
F1H
F2H
F3H
F4H
F8H
F9H
FAH
FEH
FFH
Описание
| Error code: | 01H |
| Description: | ADF PID excess speed (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
| Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | 02H |
| Description: | ADF PID reverse (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
| Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Making the following adjustments • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replacing the defective one • Checking the head FFC (CN10/11/12) for disconnection or breakage • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the PW Sensor for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | 03H |
| Description: | ADF PID lock (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Error code: | 05H |
| Description: | Flash ROM malfunction • Engine firmware upgrading has failed. |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Remedy: | 1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB. |
| Error code: | 06H |
| Description: | ADF PID driving time (Printer) |
| Causes: | • Main Board failure |
| Error code: | 10H |
| Description: | Polygon motor malfunction • A low motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period of time while the polygon motor remains energized. |
| Causes: | • CIS Unit failure • Scanner Housing failure • Main Board failure |
| Remedy: | 1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB. |
| Error code: | 11H |
| Description: | Contact detection distance exceeded (Printer) |
| Causes: | • CIS Unit failure • Scanner Housing failure (Including wrong attachment of the origin mark) • Main Board failure • FFC for CIS failure / FFC for CIS connection failure • Motor failure |
| Error code: | 20H |
| Description: | LED light failure (Printer) |
| Causes: | • CIS Unit failure • Main Board failure |
| Error code: | 36H |
| Description: | Paper jam error (Printer) |
| Causes: | • Paper jam • Foreign objec |
| Error code: | 41H |
| Description: | FB PID excess speed (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
| Remedy: | • Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC |
| Error code: | 42H |
| Description: | FB PID reverse (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
| Remedy: | • Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC |
| Error code: | 43H |
| Description: | FB PID lock (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
| Remedy: | • Checking the following parts and replace the defective one: • Printhead • Main Board • Power Supply Board • Replace the Head FFC |
| Error code: | 45H |
| Description: | FB PID excess load (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
| Error code: | 46H |
| Description: | FB PID driving time (Printer) |
| Causes: | • Main Board failure |
| Error code: | 49H |
| Description: | FB BS+ excess speed (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
| Error code: | 4AH |
| Description: | FB BS+ reverse (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
| Error code: | 4BH |
| Description: | FB BS+ lock (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
| Error code: | 4DH |
| Description: | FB BS+ excess load (Printer) |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
| Error code: | 4EH |
| Description: | FB BS+ driving time (Printer) |
| Causes: | • Main Board failure |
| Error code: | 60H |
| Description: | Home position (Printer) |
| Causes: | • Carriage overload error (paper jam/foreign object) • Ink system failure • CR Motor failure • Deformation of the Main Frame • Deformation of the CR Guide Rail • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Cable disconnection |
| Error code: | 65H |
| Description: | Wiping contact error (Printer) |
| Causes: | • Carriage overload error (paper jam/foreign object) • Ink system failure • Deformation of the Main Frame • Deformation of the CR Guide Rail • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Cable disconnection |
| Error code: | 83H |
| Description: | No reflected light error (Printer) |
| Causes: | • Fault Detection Plate failure • PIS failure (installation posture, contamination) |
| Error code: | 88H |
| Description: | Excessive Light error (Printer) |
| Causes: | • PIS failure • Main Board failure • Diffused light |
| Remedy: | • Pulling out the CDR Tray • Checking the CDR Tray Sensor • Checking the CDR Tray Sensor for adhesion of dirt or dust • Checking the connection of the connector of the CDR Tray Sensor • Checking the connection of the FFC • Checking the following parts and replace the defective one: • CDR Tray Sensor • CDR Tray |
| Error code: | 89H |
| Description: | Insufficient Light error (Printer) |
| Causes: | • PIS failure (installation posture, contamination) • Fault Detection Plate failure • Main Board failure • Ink cartridge failure |
| Remedy: | • Checking the operation of the Carriage Assy; Move the Carriage Assy by hand, and check to see if it moves smoothly. • Checking the following parts and replacing the defective one: • Checking the lead wires of the CR Motor (CN14) for disconnection or breakage • Checking the CR Encoder FFC (CN1) for disconnection or breakage • Checking the printer frame for adhesion of dirt or insufficient lubrication • Checking the CR Guide Shaft for adhesion of dirt or insufficient lubrication • Checking the Linear Scale for adhesion of dirt or damage • Checking the CR Encoder for adhesion of dirt or damage • Checking the CR Belt for damage or improper tension • Checking the CR Motor and replacing it if necessary • Main Board |
| Error code: | 8DH |
| Description: | Factor error other than printer device (Printer) |
| Causes: | • Scanner failure • ADF failure |
| Error code: | 93H |
| Description: | PE Sensor error (Printer) |
| Causes: | • PE Sensor failure • Main Board failure |
| Error code: | 94H |
| Description: | PW detector wrong light emission amount error (Printer) |
| Causes: | • PW Sensor failure • Main Board failure |
| Error code: | 95H |
| Description: | PW detector wrong light emission amount error (Printer) |
| Causes: | • PE Sensor failure • Main Board failure |
| Error code: | 9AH |
| Description: | Circuit error (include blowout of a fuse) (Printer) |
| Causes: | • Main Board failure |
| Error code: | 9BH |
| Description: | Transistor temperature error (Printer) |
| Causes: | • Main Board failure |
| Error code: | 9CH |
| Description: | X-Hot detect error (pre printing) (Printer) |
| Causes: | • Printhead failure • Main Board failure |
| Error code: | 9DH |
| Description: | X-Hot detect error (after flushing) (Printer) |
| Causes: | • Printhead failure • Main Board failure |
| Error code: | 9EH |
| Description: | Head temperature error (Printer) |
| Causes: | • Printhead failure • Main Board failure |
| Error code: | B9H |
| Description: | Other Ink device error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | BAH |
| Description: | Other Ink device error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | C0H |
| Description: | CRCM access error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | C1H |
| Description: | CRCM access error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | C3H |
| Description: | Other Ink device error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | D1H |
| Description: | PN/AL PID excess load error (Printer) |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Panel Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Remedy: | • Checking the mechanism and operation: Check the mechanism and operation of the motor in question. • Checking the connection of the connectors and routing of the lead wires • Checking the motor in question and the following parts and replacing the defective part: • Main Board • Power Supply Board |
| Error code: | D2H |
| Description: | PN/AL PID excess speed error (Printer) |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor Driver failure • Tooth skip of the Panel/Stacker gears |
| Remedy: | • Checking the mechanism and operation: Check the mechanism and operation of the motor in question. • Checking the connection of the connectors and routing of the lead wires • Checking the motor in question and the following parts and replacing the defective part: • Main Board • Power Supply Board |
| Error code: | D3H |
| Description: | PN/AL PID reverse error (Printer) |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the Panel/Stacker gears • Carriage overload error (paper jam/foreign object) |
| Remedy: | • Checking the mechanism and operation: Check the mechanism and operation of the motor in question. • Checking the connection of the connectors and routing of the lead wires • Checking the motor in question and the following parts and replacing the defective part: • Main Board • Power Supply Board |
| Error code: | D4H |
| Description: | PN/AL PID lock error (Printer) |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Panel Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Remedy: | • Checking the mechanism and operation: Check the mechanism and operation of the motor in question. • Checking the connection of the connectors and routing of the lead wires • Checking the motor in question and the following parts and replacing the defective part: • Main Board • Power Supply Board |
| Error code: | D8H |
| Description: | PN/AL load position reverse error (Printer) |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the Panel/Stacker gears • Carriage overload error (paper jam/foreign object) |
| Error code: | D9H |
| Description: | PN/AL load position excess speed error (Printer) |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor Driver failure • Tooth skip of the Panel/Stacker gears |
| Error code: | DAH |
| Description: | PN/AL load position excess load error (Printer) |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Panel Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | DEH |
| Description: | PN/AL PID driving time error (Printer) |
| Causes: | • Main Board failure |
| Error code: | DFH |
| Description: | PN/AL BS driving time error (Printer) |
| Causes: | • Main Board failure |
| Error code: | E1H |
| Description: | CR PID excess load error (Printer) |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | E2H |
| Description: | CR PID excess speed error (Printer) |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt |
| Error code: | E3H |
| Description: | CR PID reverse error (Printer) |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Carriage overload error (paper jam/foreign object) |
| Error code: | E4H |
| Description: | CR PID lock error (Printer) |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | E5H |
| Description: | CR PID speed fall error (Printer) |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Carriage overload error (paper jam/foreign object) |
| Error code: | E8H |
| Description: | CR load position reverse error (Printer) |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Carriage overload error (paper jam/foreign object) |
| Error code: | E9H |
| Description: | CR load position excess speed error (Printer) |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt |
| Error code: | EAH |
| Description: | CR load position excess load error (Printer) |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | EEH |
| Description: | CR PID driving time error (Printer) |
| Causes: | • Main Board failure |
| Error code: | EFH |
| Description: | CR BS driving time error (Printer) |
| Causes: | • Main Board failure |
| Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | F1H |
| Description: | PF PID excess load error (Printer) |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
| Error code: | F2H |
| Description: | PF PID excess speed error (Printer) |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt |
| Error code: | F3H |
| Description: | PF PID reverse error (Printer) |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt |
| Error code: | F4H |
| Description: | PF PID lock error (Printer) |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
| Error code: | F8H |
| Description: | PF load position reverse error (Printer) |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt |
| Error code: | F9H |
| Description: | PF load position excess speed error (Printer) |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt |
| Error code: | FAH |
| Description: | PF load position excess load error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
| Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | FEH |
| Description: | PF PID driving time error |
| Causes: | • Main Board failure |
| Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | FFH |
| Description: | PF BS driving time error |
| Causes: | • Main Board failure |
