Epson XP530
Рейтинг
Модули
SC-011
MECH-021
ELEC-011
MECH-011
CASE-011
Детали CASE-011
| Деталь: | STRONG TAPE NO.388 BLUE |
| Парткод: | 1032813 |
| Деталь: | GREASE G-45 |
| Парткод: | 1033657 |
| Деталь: | INK HOLDER |
| Парткод: | 1280612 |
| Деталь: | GREASE G-74 |
| Парткод: | 1409257 |
| Деталь: | I/P,DPIC009BSP,110,PRINTING |
| Парткод: | 1462531 |
| Деталь: | GREASE G-71(BLUE) |
| Парткод: | 1480655 |
| Деталь: | GREASE,G-94 |
| Парткод: | 1561125 |
| Деталь: | GREASE,G-96 (40g) |
| Парткод: | 1590700 |
| Деталь: | Shipping Cleaning Liquid,CR02,18kg |
| Парткод: | 6022798 |
| Деталь: | Shipping Cleaning Liquid,CR02,1kg |
| Парткод: | 6022805 |
| Деталь: | SCANNER UNIT, CD33, , IEI,ASP |
| Парткод: | 2157269 |
| Деталь: | HOUSING,UPPER,SC,, D, ASSY, ASP |
| Парткод: | 1620232 |
| Деталь: | CARRIAGE,CIS,SC, B, ASSY |
| Парткод: | 1612531 |
| Деталь: | HOUSING,LOWER,REAR,LEFT,SC |
| Парткод: | 1575744 |
| Деталь: | HOUSING,LOWER,REAR,RIGHT,SC |
| Парткод: | 1575745 |
| Деталь: | COVER,DOCUMENT,, D, ASSY |
| Парткод: | 1593370 |
| Деталь: | COVER,HOUSING,UPPER,SC,CA |
| Парткод: | 1589095 |
| Деталь: | FOOT |
| Парткод: | 1572503 |
| Деталь: | HINGE,ASSEMBLY,SC |
| Парткод: | 1658902 |
| Деталь: | PAPER GUIDE,FRAME,BANK ASSY |
| Парткод: | 1632847 |
| Деталь: | DUPLEX,UNIT,B, IEI |
| Парткод: | 1645826 |
| Деталь: | COVER,MSF,MC |
| Парткод: | 1572221 |
| Деталь: | FRAME,MSF, C, ASSY |
| Парткод: | 1611228 |
| Деталь: | TRAY,POROUS PAD,INK EJECT ASSY |
| Парткод: | 1612118 |
| Деталь: | INK,SYSTEM ASSY |
| Парткод: | 1612121 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1436642 |
| Деталь: | POROUS PAD,INK EJECT,IS,LOWER |
| Парткод: | 1573556 |
| Деталь: | CASSETTE., CE81 ,ASSY, IEI,ASP |
| Парткод: | 1695671 |
| Деталь: | COVER,CASSETTE |
| Парткод: | 1656706 |
| Деталь: | STACKER,MAIN, C |
| Парткод: | 1640384 |
| Деталь: | TORSION SPRING,25.39,LEFT |
| Парткод: | 1572243 |
| Деталь: | HOLDER,STAR WHEEL ASSY |
| Парткод: | 1612102 |
| Деталь: | TORSION SPRING,44.24,RIGHT |
| Парткод: | 1572244 |
| Деталь: | TORSION SPRING,5.1 |
| Парткод: | 1571772 |
| Деталь: | COVER,CLIP, B |
| Парткод: | 1607102 |
| Деталь: | POROUS PAD,PAPER GUIDE,LOWER |
| Парткод: | 1571762 |
| Деталь: | SCALE,CR, B |
| Парткод: | 1611329 |
| Деталь: | COVER,CR,FRONT |
| Парткод: | 1572225 |
| Деталь: | CONNECTOR,CSIC, B, ASSY |
| Парткод: | 1632596 |
| Деталь: | CABLE HEAD, ASSY, ASP |
| Парткод: | 1620185 |
| Деталь: | GUIDE,IC, B |
| Парткод: | 1611533 |
| Деталь: | COVER,FFC ASSY, ASP |
| Парткод: | 1589857 |
| Деталь: | ENCODER,PF, E ASSY |
| Парткод: | 1638191 |
| Деталь: | HOLDER,CAM ASSY |
| Парткод: | 1577835 |
| Деталь: | PAPER GUIDE,UPPER,INNER, B, ASSY |
| Парткод: | 1612525 |
| Деталь: | PAPER GUIDE,UPPER,OUTER ASSY |
| Парткод: | 1577851 |
| Деталь: | FRAME,PICKUP UNIT, C |
| Парткод: | 1612099 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 2143464 |
| Деталь: | SPUR GEAR,14.4, B |
| Парткод: | 1607398 |
| Деталь: | SPUR GEAR,17.6, B |
| Парткод: | 1607397 |
| Деталь: | DUAL ONE WAY CLUTCH, C, ASSY |
| Парткод: | 1616336 |
| Деталь: | SHAFT,DRIVE,PICKUP |
| Парткод: | 1572152 |
| Деталь: | CABLE,ENCODER, B |
| Парткод: | 2144455 |
| Деталь: | CABLE,CRCM, B |
| Парткод: | 2144454 |
| Деталь: | CENTER SUPPORT,EJ |
| Парткод: | 1576559 |
| Деталь: | TIMING BELT,CR |
| Парткод: | 1608941 |
| Деталь: | CR CONTACT MODULE |
| Парткод: | 2140849 |
| Деталь: | BOARD ASSY.,SENSOR |
| Парткод: | 2154774 |
| Деталь: | BOARD ASSY.,SENSOR |
| Парткод: | 2154772 |
| Деталь: | STRONG TAPE NO.388 BLUE |
| Парткод: | 1032813 |
| Деталь: | GREASE G-45 |
| Парткод: | 1033657 |
| Деталь: | INK HOLDER |
| Парткод: | 1280612 |
| Деталь: | GREASE G-74 |
| Парткод: | 1409257 |
| Деталь: | I/P,DPIC009BSP,110,PRINTING |
| Парткод: | 1462531 |
| Деталь: | GREASE G-71(BLUE) |
| Парткод: | 1480655 |
| Деталь: | GREASE,G-94 |
| Парткод: | 1561125 |
| Деталь: | GREASE,G-96 (40g) |
| Парткод: | 1590700 |
| Деталь: | Shipping Cleaning Liquid,CR02,18kg |
| Парткод: | 6022798 |
| Деталь: | Shipping Cleaning Liquid,CR02,1kg |
| Парткод: | 6022805 |
| Деталь: | MAIN BOARD ASSY CE81, IEI |
| Парткод: | 1663077 |
| Деталь: | HARNESS |
| Парткод: | 2159109 |
| Деталь: | BOARD ASSY.,SUB |
| Парткод: | 2159101 |
| Деталь: | HOUSING,FRONT,LEFT., CE79,ASSY, IEI |
| Парткод: | 1662646 |
| Деталь: | WIRELESS LAN USB MODULE |
| Парткод: | 2172190 |
| Деталь: | HARNESS |
| Парткод: | 2142556 |
| Деталь: | BOARD ASSY.,POWER SUPPLY |
| Парткод: | 2152431 |
| Деталь: | FOOT |
| Парткод: | 1572503 |
| Деталь: | HINGE,ASSEMBLY,SC |
| Парткод: | 1658902 |
| Деталь: | PAPER GUIDE,FRAME,BANK ASSY |
| Парткод: | 1632847 |
| Деталь: | DUPLEX,UNIT,B, IEI |
| Парткод: | 1645826 |
| Деталь: | COVER,MSF,MC |
| Парткод: | 1572221 |
| Деталь: | FRAME,MSF, C, ASSY |
| Парткод: | 1611228 |
| Деталь: | TRAY,POROUS PAD,INK EJECT ASSY |
| Парткод: | 1612118 |
| Деталь: | INK,SYSTEM ASSY |
| Парткод: | 1612121 |
| Деталь: | CLAMP,TUBE |
| Парткод: | 1436642 |
| Деталь: | POROUS PAD,INK EJECT,IS,LOWER |
| Парткод: | 1573556 |
| Деталь: | CASSETTE., CE81 ,ASSY, IEI,ASP |
| Парткод: | 1695671 |
| Деталь: | COVER,CASSETTE |
| Парткод: | 1656706 |
| Деталь: | STACKER,MAIN, C |
| Парткод: | 1640384 |
| Деталь: | TORSION SPRING,25.39,LEFT |
| Парткод: | 1572243 |
| Деталь: | HOLDER,STAR WHEEL ASSY |
| Парткод: | 1612102 |
| Деталь: | TORSION SPRING,44.24,RIGHT |
| Парткод: | 1572244 |
| Деталь: | TORSION SPRING,5.1 |
| Парткод: | 1571772 |
| Деталь: | COVER,CLIP, B |
| Парткод: | 1607102 |
| Деталь: | POROUS PAD,PAPER GUIDE,LOWER |
| Парткод: | 1571762 |
| Деталь: | SCALE,CR, B |
| Парткод: | 1611329 |
| Деталь: | COVER,CR,FRONT |
| Парткод: | 1572225 |
| Деталь: | CONNECTOR,CSIC, B, ASSY |
| Парткод: | 1632596 |
| Деталь: | CABLE HEAD, ASSY, ASP |
| Парткод: | 1620185 |
| Деталь: | GUIDE,IC, B |
| Парткод: | 1611533 |
| Деталь: | COVER,FFC ASSY, ASP |
| Парткод: | 1589857 |
| Деталь: | ENCODER,PF, E ASSY |
| Парткод: | 1638191 |
| Деталь: | HOLDER,CAM ASSY |
| Парткод: | 1577835 |
| Деталь: | PAPER GUIDE,UPPER,INNER, B, ASSY |
| Парткод: | 1612525 |
| Деталь: | PAPER GUIDE,UPPER,OUTER ASSY |
| Парткод: | 1577851 |
| Деталь: | FRAME,PICKUP UNIT, C |
| Парткод: | 1612099 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 2143464 |
| Деталь: | SPUR GEAR,14.4, B |
| Парткод: | 1607398 |
| Деталь: | SPUR GEAR,17.6, B |
| Парткод: | 1607397 |
| Деталь: | DUAL ONE WAY CLUTCH, C, ASSY |
| Парткод: | 1616336 |
| Деталь: | SHAFT,DRIVE,PICKUP |
| Парткод: | 1572152 |
| Деталь: | CABLE,ENCODER, B |
| Парткод: | 2144455 |
| Деталь: | CABLE,CRCM, B |
| Парткод: | 2144454 |
| Деталь: | CENTER SUPPORT,EJ |
| Парткод: | 1576559 |
| Деталь: | TIMING BELT,CR |
| Парткод: | 1608941 |
| Деталь: | CR CONTACT MODULE |
| Парткод: | 2140849 |
| Деталь: | BOARD ASSY.,SENSOR |
| Парткод: | 2154774 |
| Деталь: | BOARD ASSY.,SENSOR |
| Парткод: | 2154772 |
| Деталь: | INK CART.UNBOXED,BK-L,PIGT, EC335AS |
| Парткод: | 1703749 |
| Деталь: | INK CART.UNBOXED,PBK-L,DYE, EC336AS |
| Парткод: | 1703750 |
| Деталь: | INK CART.UNBOXED,C-L,DYE, EC336AS |
| Парткод: | 1703751 |
| Деталь: | INK CART.UNBOXED,M-L,DYE, EC336AS |
| Парткод: | 1703752 |
| Деталь: | INK CART.UNBOXED,Y-L,DYE, EC336AS |
| Парткод: | 1703753 |
| Деталь: | POWER CABLE |
| Парткод: | 2150400 |
| Деталь: | HOUSING,FRONT,TOP, B |
| Парткод: | 1631652 |
| Деталь: | HOUSING,LOWER,LEFT,, CE76, ASSY, IEI |
| Парткод: | 1665712 |
| Деталь: | HOUSING,UPPER, D, ASSY,ASP |
| Парткод: | 1673372 |
| Деталь: | HOUSING,FRONT,LEFT, D |
| Парткод: | 1656673 |
| Деталь: | HOUSING,FRONT,LOWER,LEFT, B |
| Парткод: | 1631648 |
| Деталь: | FRAME,BASE,LEFT,ASSY, ASP, E, IEI |
| Парткод: | 1637509 |
| Деталь: | FRAME,BASE,RIGHT, D, ASSY, ASP |
| Парткод: | 1599819 |
| Деталь: | HOUSING,FRONT,RIGHT, I |
| Парткод: | 1656678 |
| Деталь: | PANEL, ASSY, CE81, I |
| Парткод: | 1663376 |
| Деталь: | FRAME,PANEL, CE81 ,ASSY,IEI |
| Парткод: | 1663076 |
| Деталь: | HOUSING,FRONT,LOWER,RIGHT, B |
| Парткод: | 1631685 |
Коды ошибок
0x01
0x02
0x03
0x04
0x05
0x06
0x09
0x0A
0x0B
0x0D
0x0E
0x10
0x11
0x12
0x13
0x20
0x30
0x36
0x41
0x42
0x43
0x44
0x45
0x46
0x49
0x4A
0x4B
0x4D
0x4E
0x60
0x62
0x63
0x65
0x66
0x7F
0x81
0x82
0x83
0x84
0x87
0x88
0x89
0x8B
0x8D
0x8E
0x8F
0x93
0x94
0x95
0x99
0x9A
0x9B
0x9C
0x9D
0x9E
0x9F
0xA0
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
0xAB
0xAC
0xAD
0xAE
0xAF
0xB9
0xBA
0xC0
0xC1
0xC3
0xD1
0xD2
0xD3
0xD4
0xD8
0xD9
0xDA
0xDC
0xDD
0xDE
0xDF
0xE1
0xE2
0xE3
0xE4
0xE5
0xE8
0xE9
0xEA
0xEE
0xEF
0xF1
0xF2
0xF3
0xF4
0xF8
0xF9
0xFA
0xFE
0xFF
FAH
FEH
FFH
Описание
| Error code: | 0x01 |
| Description: | ADF PID excess speed |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
| Error code: | 0x02 |
| Description: | ADF PID reverse |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
| Error code: | 0x03 |
| Description: | ADF PID lock |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Error code: | 0x04 |
| Description: | ADF PID acceleration lock error |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Error code: | 0x05 |
| Description: | ADF PID excess load |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Error code: | 0x06 |
| Description: | ADF PID driving time |
| Causes: | • Main Board failure |
| Error code: | 0x09 |
| Description: | ADF BS+ excess speed error |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
| Error code: | 0x0A |
| Description: | ADF BS+ reverse error |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
| Error code: | 0x0B |
| Description: | ADF BS+ lock error |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Error code: | 0x0D |
| Description: | ADF BS+ excess load error |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Error code: | 0x0E |
| Description: | ADF BS+ driving time error |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection |
| Error code: | 0x10 |
| Description: | HP detection failure |
| Causes: | • CIS Unit failure • Scanner Housing failure • Main Board failure • Insufficient grease • Foreign object • FFC for CIS failure / FFC for CIS connection failure |
| Error code: | 0x11 |
| Description: | Contact detection distance exceeded |
| Causes: | • CIS Unit failure • Scanner Housing failure (Including wrong attachment of the origin mark) • Main Board failure • FFC for CIS failure / FFC for CIS connection failure • Motor failure |
| Error code: | 0x12 |
| Description: | Opposite side contact detection distance exceeded error |
| Causes: | • CIS Unit failure • Scanner Housing failure (Including wrong attachment of the origin mark) • Main Board failure • FFC for CIS failure / FFC for CIS connection failure • Motor failure |
| Error code: | 0x13 |
| Description: | Wrong contact detection distance error |
| Causes: | • CIS Unit failure • Scanner Housing failure (Including wrong attachment of the origin mark) • Main Board failure • FFC for CIS failure / FFC for CIS connection failure • Motor failure |
| Error code: | 0x20 |
| Description: | LED light failure |
| Causes: | • CIS Unit failure • Main Board failure |
| Error code: | 0x30 |
| Description: | Option error |
| Causes: | • Main Board for Scanner FFC connection failure • Main Board failure |
| Error code: | 0x36 |
| Description: | Paper jam error |
| Causes: | • Paper jam • Foreign object • Loading/ejecting papers out of the standard range or curled papers • Using long papers (Legal or longer) |
| Error code: | 0x41 |
| Description: | FB PID excess speed |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
| Error code: | 0x42 |
| Description: | FB PID reverse |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
| Error code: | 0x43 |
| Description: | FB PID lock |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
| Error code: | 0x44 |
| Description: | FB PID acceleration lock error |
| Causes: | • Cable disconnection |
| Error code: | 0x45 |
| Description: | FB PID excess load |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
| Error code: | 0x46 |
| Description: | FB PID driving time |
| Causes: | • Main Board failure |
| Error code: | 0x49 |
| Description: | FB BS+ excess speed |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) |
| Error code: | 0x4A |
| Description: | FB BS+ reverse |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam |
| Error code: | 0x4B |
| Description: | FB BS+ lock |
| Causes: | ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
| Error code: | 0x4D |
| Description: | FB BS+ excess load |
| Causes: | • ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive mechanism overload (assembling failure, lubrication failure) • Cable disconnection |
| Error code: | 0x4E |
| Description: | FB BS+ driving time |
| Causes: | • Main Board failure |
| Error code: | 0x60 |
| Description: | Home position |
| Causes: | • Carriage overload error (paper jam/foreign object) • Ink system failure • CR Motor failure • Deformation of the Main Frame • Deformation of the CR Guide Rail • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Cable disconnection |
| Error code: | 0x62 |
| Description: | Contact error at ink replacement timing (Power-off) |
| Causes: | • Paper jam • Foreign object • Deformation of the Main Frame |
| Error code: | 0x63 |
| Description: | Ink cartridge replacement timing contact detection error (Power off) |
| Causes: | • Paper jam • Foreign object • Deformation of the Main Frame |
| Error code: | 0x65 |
| Description: | Wiping contact error |
| Causes: | • Carriage overload error (paper jam/foreign object) • Ink system failure • Deformation of the Main Frame • Deformation of the CR Guide Rail • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Cable disconnection |
| Error code: | 0x66 |
| Description: | 2nd Tray switch error |
| Causes: | • Main Board failure |
| Error code: | 0x7F |
| Description: | Inspection mode timing error |
| Causes: | • No occures except in manufacturing prodess. |
| Error code: | 0x81 |
| Description: | PIS environmental error |
| Causes: | • Diffused light |
| Error code: | 0x82 |
| Description: | PIS continuous reflected light error |
| Causes: | • PIS failure • Main Board failure • Diffused light • PIS failure (lighting all the time) |
| Error code: | 0x83 |
| Description: | No reflected light error |
| Causes: | • Fault Detection Plate failure *2 • PIS failure (installation posture, contamination) |
| Error code: | 0x84 |
| Description: | PIS shift length error |
| Causes: | • Home position gap • Diffused light |
| Error code: | 0x87 |
| Description: | PIS Empty Jig error |
| Causes: | • PIS failure (installation posture, contamination) |
| Error code: | 0x88 |
| Description: | Excessive Light error |
| Causes: | • PIS failure • Main Board failure • Diffused light |
| Error code: | 0x89 |
| Description: | Insufficient Light error |
| Causes: | • PIS failure (installation posture, contamination) • Fault Detection Plate failure *2 • Main Board failure • Ink cartridge failure |
| Error code: | 0x8B |
| Description: | Head fuse blowing error |
| Causes: | • Head fuse blowing failure |
| Error code: | 0x8D |
| Description: | Factor error other than printer device |
| Causes: | • Scanner failure • ADF failure |
| Error code: | 0x8E |
| Description: | Driver mismatch error |
| Causes: | • An unsupported driver was used |
| Error code: | 0x8F |
| Description: | EEPROM verify error (by command) |
| Causes: | • Main Board failure, Flash ROM failure |
| Error code: | 0x93 |
| Description: | PE Sensor error |
| Causes: | • PE Sensor failure • Main Board failure |
| Error code: | 0x94 |
| Description: | PW detector wrong light emission amount error |
| Causes: | • PW Sensor failure • Main Board failure |
| Error code: | 0x95 |
| Description: | PE detector wrong light emission amount error |
| Causes: | • PE Sensor failure • Main Board failure |
| Error code: | 0x99 |
| Description: | IES(Ink End Sensor) prosess check error |
| Causes: | • Main Board failure |
| Error code: | 0x9A |
| Description: | Circuit error (include blowout of a fuse) |
| Causes: | • Main Board failure |
| Error code: | 0x9B |
| Description: | Transistor temperature error |
| Causes: | • Main Board failure |
| Error code: | 0x9C |
| Description: | X-Hot detect error (pre printing) |
| Causes: | • Printhead failure • Main Board failure |
| Error code: | 0x9D |
| Description: | X-Hot detect error (after flushing) |
| Causes: | • Printhead failure • Main Board failure |
| Error code: | 0x9E |
| Description: | Head temperature error |
| Causes: | • Printhead failure • Main Board failure |
| Error code: | 0x9F |
| Description: | Printing inspection less mode error |
| Causes: | • This error occurs if the printing or manual cleaning are performed in Printing inspection less mode. |
| Error code: | 0xA0 |
| Description: | I/S PID excess load error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA1 |
| Description: | STK PID excess load error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA2 |
| Description: | STK PID excess speed error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA3 |
| Description: | STK PID reverse error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA4 |
| Description: | STK PID lock error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA5 |
| Description: | I/S PID excess speed error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA6 |
| Description: | I/S PID reverse error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA7 |
| Description: | I/S PID lock error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA8 |
| Description: | STK load position reverse error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xA9 |
| Description: | STK load position excess error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xAA |
| Description: | STK load position excess load error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xAB |
| Description: | I/S load position reverse error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xAC |
| Description: | I/S load position excess speed error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xAD |
| Description: | I/S load position excess load error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xAE |
| Description: | STK PID driving time error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xAF |
| Description: | STK BS driving time error |
| Causes: | • Remove the protection material • Panel Encoder failure(contaminated/detached scale, Encoder Board failure) • Pickup roller drive mechanism overload(paper jam/foreign object) • Cable disconnecction |
| Error code: | 0xB9 |
| Description: | Other Ink device error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | 0xBA |
| Description: | Other Ink device error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | 0xC0 |
| Description: | CRCM access error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | 0xC1 |
| Description: | CRCM access error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | 0xC3 |
| Description: | Other Ink device error |
| Causes: | • Ink cartridge failure • Holder Board Assy failure (CSIC Terminal failure/CR Contact Module failure) • Main Board failure • Cable disconnection |
| Error code: | 0xD1 |
| Description: | PNL PID excess load error |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Panel Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xD2 |
| Description: | PNL PID excess speed error |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor Driver failure • Tooth skip of the Panel/Stacker gears |
| Error code: | 0xD3 |
| Description: | PNL PID reverse error |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the Panel/Stacker gears • Carriage overload error (paper jam/foreign object) |
| Error code: | 0xD4 |
| Description: | PNL PID lock error |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Panel Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xD8 |
| Description: | PNL load position reverse error |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the Panel/Stacker gears • Carriage overload error (paper jam/foreign object) |
| Error code: | 0xD9 |
| Description: | PNL load position excess speed error |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor Driver failure • Tooth skip of the Panel/Stacker gears |
| Error code: | 0xDA |
| Description: | PNL load position excess load error |
| Causes: | • Panel Encoder failure (contaminated/detached scale, Encoder Board failure) • Panel Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xDC |
| Description: | I/S PID driving time error |
| Causes: | • Pickup roller overload error (paper jam/foreign object) |
| Error code: | 0xDD |
| Description: | I/S BS driving time error |
| Causes: | • Pickup roller overload error (paper jam/foreign object) |
| Error code: | 0xDE |
| Description: | PNL PID driving time error |
| Causes: | • Main Board failure |
| Error code: | 0xDF |
| Description: | PNL BS driving time error |
| Causes: | • Main Board failure |
| Error code: | 0xE1 |
| Description: | CR PID excess load error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xE2 |
| Description: | CR PID excess speed error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt |
| Error code: | 0xE3 |
| Description: | CR PID reverse error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Carriage overload error (paper jam/foreign object) |
| Error code: | 0xE4 |
| Description: | CR PID lock error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xE5 |
| Description: | CR PID speed fall error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Carriage overload error (paper jam/foreign object) |
| Error code: | 0xE8 |
| Description: | CR load position reverse error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Carriage overload error (paper jam/foreign object) |
| Error code: | 0xE9 |
| Description: | CR load position excess speed error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt |
| Error code: | 0xEA |
| Description: | CR load position excess load error |
| Causes: | • CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xEE |
| Description: | CR PID driving time error |
| Causes: | • Main Board failure |
| Error code: | 0xEF |
| Description: | CR BS driving time error |
| Causes: | • Main Board failure |
| Error code: | 0xF1 |
| Description: | PF PID excess load error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xF2 |
| Description: | PF PID excess speed error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt |
| Error code: | 0xF3 |
| Description: | PF PID reverse error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt |
| Error code: | 0xF4 |
| Description: | PF PID lock error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xF8 |
| Description: | PF load position reverse error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt |
| Error code: | 0xF9 |
| Description: | PF load position excess speed error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure) • Tooth skip of the PF Timing Belt • Improper tension of the PF Timing Belt |
| Error code: | 0xFA |
| Description: | PF load position excess load error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
| Error code: | 0xFE |
| Description: | PF PID driving time error |
| Causes: | • Main Board failure |
| Error code: | 0xFF |
| Description: | PF load position excess driving time error |
| Causes: | • Main Board failure |
| Error code: | FAH |
| Description: | PF load position excess load error |
| Causes: | • PF Encoder failure (contaminated/detached scale, Encoder Board failure) • PF Motor failure • PF drive mechanism overload (paper jam/foreign object) • Cable disconnection |
| Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | FEH |
| Description: | PF PID driving time error |
| Causes: | • Main Board failure |
| Remedy: | • Checking the PF mechanism by visual inspection: Check the PF mechanism for paper jam or adhesion of foreign matters by visual inspection. • Checking the operation of the PF mechanism: Operate the PF mechanism by hand, and check to see if it operates smoothly. • Making the following adjustments: • Bi-D • Paper feed length with PF Assy • Paper feed length with Eject Assy • PW adjustment • Checking the following parts and replace the defective one: • Checking the PF Encoder FFC (CN8) for disconnection or breakage • Checking the lead wires of the PF Motor (CN13) for disconnection or breakage • Checking the PF scale for adhesion of dirt or damage • Checking the PF encoder for adhesion of dirt or damage • Checking the Upper Paper Guides for improper installation • Checking the PF Motor and replacing it if necessary • Main Board • Power Supply Board |
| Error code: | FFH |
| Description: | PF BS driving time error |
| Causes: | • Main Board failure |
