HP Color LaserJet 4650dn

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

85000

Цветность печати

цветная

Общие характеристики
Область применения	средний офис
Тип	лазерный/светодиодный
Технология печати	лазерная
Число страниц в месяц	85 000
Размещение	настольный
Цветность печати	цветная
Тип устройства	Принтер
Макс. формат	A4
Сканер
Телефон
Факс
Копир
Печать фотографий
Принтер
Печать без полей
Прямая печать
Двусторонняя печать
Количество цветов	4
Макс, разрешение для ч/б печати
По X	600
По Y	600
Скорость цветной печати
A4	22
Время выхода первого отпечатка
Цветн,	15
Ч/б	15
Расходные материалы
Ресурс цветного картриджа/тонера	8 000
Ресурс ч/б картриджа/тонера	9 000
Количество картриджей	4
Печать на:
CD/DVD
Рулоне
Фотобумаге
Глянцевой бумаге
Конвертах
Матовой бумаге
Карточках
Пленках
Этикетках
Плотность бумаги
Максимальная	105
Минимальная	60
Телефон
Спикерфон
АОН
Беспроводная трубка
Автоответчик
Стандарт DECT
Caller ID
Проводная трубка
Языки управления
PostScript 2
PPDS
PCL 5e
PostScript
PostScript 3
PCL 5c
PCL 6
PDF
Лотки
Подача бумаги
Стандартная	600
Максимальная	1 600
Вывод бумаги
Стандартный	250
Максимальный	250
Финишер
Электронная сортировка
Сортировка со сдвигом
Степлер
Брошюровщик
Сортер
Интерфейсы
RS-232
Инфракрасный порт
Bluetooth
Wi-Fi
FireWire (IEEE 1394)
USB
Устройство для чтения карт памяти
LPT
Ethernet (RJ-45)
Версия USB	2,0
Количество свободных слотов расширения	3
Поддержка карт памяти
CompactFlash
Память/Процессор
Макс, объем памяти	416
Процессор	RISC
Объем памяти	160
Частота процессора	533
Дополнительная информация
Экран
Мин. системные требования
Поддержка ОС
DOS
Mac OS
Windows
Linux
Потребляемая мощность
В режиме ожидания	38
При работе	560
Габариты
Высота	566
Ширина	456
Глубина	480
Вес	36,3

Коды ошибок

10.10.YY

10.30.YY

10.XX.YY

13.02.00

13.05.00

13.09.00

13.0A

13.12.00

13.20.00

13.XX.YY

41.3

41.5

41.X

49.XXXX

50.X

51.XY

52.XY

53.XY.ZZ

54.20.00

54.X

54.XX.00

55.01.XY

56.XX

57.X

58.X

59.XY

68.X

79.XXXX

8X.YYYY

Описание

Парткод

Название

НР 641A Тонер-картридж черный

НР 641AD Двойная упаковка картриджа C9720A

НР 641A Тонер-картридж голубой

НР 641A Тонер-картридж желтый

НР 641A Тонер-картридж пурпурный

(C9724A) HP Комплект переноса изображения

HP (C9726A) Комплект термического закрепления 220v

Error code:	10.10.YY
Display:	10.XX.YY SUPPLY MEMORY ERROR
Description:	The MFP cannot read or write to at least one print cartridge e-label or an e-label is missing from a print cartridge. MFP cannot communicate with the e-label.
Remedy:	1. Reinstall the print cartridge, or install a new HP print cartridge. 2. Verify that connector J97 on the DC controller PCA is firmly seated.

Error code:	10.30.YY
Display:	10.30.YY
Description:	A non-HP print cartridge is installed. 10.30.00 black print cartridge 10.30.01 cyan print cartridge 10.30.02 magenta print cartridge 10.30.03 yellow print cartridge
Remedy:	1 Turn the printer off and then on. 2 Remove all of the print cartridges and turn the printer off and then on. 3 If the error persists, replace the indicated cartridge.

Error code:	10.XX.YY
Display:	10.XX.YY SUPPLY MEMORY ERROR
Description:	An error has occurred in one or more of the product`s supplies. Values of XX and YY are listed below: XX00 = memory is defective XX01 = memory is missing YY00 = cartridge
Remedy:	• Turn the product off and then on to clear the message. • Replace the print cartridge.

Error code:	13.02.00
Display:	13.02.00 Jam inside upper right door
Description:	Stay jam at SR5 (top/registration sensor). SR5 continues to detect media, after the media is originally detected, longer than specified.
Remedy:	Clear the jam. 1. Check for paper or other obstructions to the paper path in Tray 2 and before the registration area. 2. Check SR5 (top/registration sensor) and flag for correct mechanical functionality. Repair or replace if necessary. 3. Check connector J319 on the dc controller. 4. Replace the HVPS. 5. Replace the dc controller.

Error code:	13.05.00
Display:	13.05.00 JAM INSIDE TOP COVER
Description:	Paper failed to reach the delivery sensor within a specified period of time when a print job was initiated. When troubleshooting paper jams, always observe where the leading edge of the paper stops in the jam.
Remedy:	1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that the fuser motor (M2) connector is firmly seated. The fuser motor wiring is hard-wired to the back of the ECU at connector J501. The motor connector is free-standing behind the ECU. To see if the fuser motor is functional, observe the output stacker rollers while turning on the device. If the rollers rotate, the motor is functional. If they do not rotate, verify the connection.

Error code:	20
Description:	Vertical image or label drift
Causes:	The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media.
Remedy:	Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation.

Error code:	22
Description:	Loss of printing registration on labels. Excessive vertical drift in top-of-form registration.
Causes:	The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly.
Remedy:	Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58.

Error code:	40
Display:	Scanner locked
Description:	10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run.
Causes:	1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors.
Remedy:	Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board.

Error code:	62
Display:	Nongenuine Toner Replace Toner
Description:	The toner cartridge installed is not a genuine cartridge.
Causes:	· Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board
Remedy:	This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge.