HP Color LaserJet CM1410 MFP Pro
Рейтинг
Модули
Document feeder assembly parts
Scanner and document feeder main assemblies
PCAs
Internal assemblies (3 of 4)
Internal assemblies (2 of 4)
Internal assemblies (1 of 4)
Internal assemblies (4 of 4)
Covers, panels, and doors
Детали Scanner and document feeder main assemblies
| Деталь: | Document feeder (ADF) core assembly |
| Парткод: | CE538-60122 |
| Деталь: | Document feeder (ADF) input tray |
| Парткод: | CE538-60127 |
| Деталь: | Document feeder (ADF) base |
| Парткод: | CE538-60126 |
| Деталь: | Document feeder (ADF) cover, outer |
| Парткод: | CE538-40009 |
| Деталь: | Document feeder (ADF) pick arm assembly |
| Парткод: | CE538-60137 |
| Деталь: | Spring, document feeder (ADF) extension (pre-pick) |
| Парткод: | Q7400-00011 |
| Деталь: | Shaft, document feeder (ADF) pick extension |
| Парткод: | Q7400-40047 |
| Деталь: | Document feeder (ADF) cover, inner |
| Парткод: | CE538-40008 |
| Деталь: | Roller assembly, document feeder (ADF) post-scan pinch |
| Парткод: | Q7400-60153 |
| Деталь: | Document feeder (ADF) separation pad assembly |
| Парткод: | Q7400-60159 |
| Деталь: | Document feeder (ADF) motor cover |
| Парткод: | CE538-40015 |
| Деталь: | Document feeder (ADF) assembly |
| Парткод: | CE538-60121 |
| Деталь: | SCANNER ASSEMBLY |
| Парткод: | CE861-60110 |
| Деталь: | Control-panel PCA assembly |
| Парткод: | CE862-60101 |
| Деталь: | HIGH-VOLTAGE POWER SUPPLY |
| Парткод: | RM1-7090-000CN |
| Деталь: | Fuser power supply (110 to 127 v) |
| Парткод: | RM1-7082-000CN |
| Деталь: | Fuser power supply (220 to 240 v) |
| Парткод: | RM1-7083-000CN |
| Деталь: | Low-voltage power supply (110 to 127 v) |
| Парткод: | RM1-7830-000CN |
| Деталь: | Low-voltage power supply (220 to 240 v) |
| Парткод: | RM1-7831-000CN |
| Деталь: | Fax PCA, DAA EU |
| Парткод: | CE683-67901 |
| Деталь: | Fax PCA, DAA AA |
| Парткод: | CE682-67901 |
| Деталь: | Formatter PCA |
| Парткод: | CE690-67901 |
| Деталь: | DC controller assembly |
| Парткод: | RM1-7813-000CN |
| Деталь: | Wireless PCA |
| Парткод: | 1150-7938 |
| Деталь: | USB PCA |
| Парткод: | CF030-67901 |
| Деталь: | HIGH-VOLTAGE POWER SUPPLY |
| Парткод: | RM1-7090-000CN |
| Деталь: | Intermediate transfer belt (ITB) assembly |
| Парткод: | RM1-7866-000CN |
| Деталь: | Bushing (transfer roller) |
| Парткод: | RC2-2111-000CN |
| Деталь: | Bushing (transfer roller) |
| Парткод: | RC2-2112-000CN |
| Деталь: | ROLLER, TRANSFER |
| Парткод: | RM1-4445-000CN |
| Цена: | 1 300 ₽ |
| Деталь: | PAPER FEED GUIDE ASSEMBLY |
| Парткод: | RM1-4448-000CN |
| Деталь: | DC controller assembly |
| Парткод: | RM1-7813-000CN |
| Деталь: | Low-voltage power supply (110 to 127 v) |
| Парткод: | RM1-7830-000CN |
| Деталь: | Low-voltage power supply (220 to 240 v) |
| Парткод: | RM1-7831-000CN |
| Деталь: | Motor, DC main |
| Парткод: | RL1-1834-000CN |
| Деталь: | Cable, flat (FFC) |
| Парткод: | RK2-1955-000CN |
| Деталь: | SEPARATION ROLLER ASSEMBLY |
| Парткод: | RM1-4425-000CN |
| Деталь: | Pickup roller assembly |
| Парткод: | RM1-4426-000CN |
| Цена: | 240 ₽ |
| Деталь: | CASSETTE ASSEMBLY |
| Парткод: | RM1-7714-000CN |
| Деталь: | COVER, HOLDER |
| Парткод: | RC2-2014-000CN |
| Цена: | 320 ₽ |
| Деталь: | Fuser assembly (110 to 127 v) |
| Парткод: | RM1-4430-000CN |
| Деталь: | Fuser assembly (220 to 240 v) |
| Парткод: | RM1-4431-000CN |
| Цена: | 7 800 ₽ |
| Деталь: | Fuser drive assembly |
| Парткод: | RM1-4927-000CN |
| Деталь: | Cartridge tray assembly |
| Парткод: | RM1-7853-000CN |
| Деталь: | Motor, stepping DC fuser |
| Парткод: | RK2-1872-000CN |
| Деталь: | COVER, LEFT |
| Парткод: | RC1-0795-000CN |
| Деталь: | COVER, REAR UPPER |
| Парткод: | RC3-0819-000CN |
| Деталь: | COVER, REAR LOWER |
| Парткод: | RC3-0753-000CN |
| Деталь: | Cover, rear center |
| Парткод: | RC3-0767-000CN |
| Деталь: | Door, front |
| Парткод: | RC3-0796-000CN |
| Деталь: | Cover, top assembly |
| Парткод: | RM1-7715-000CN |
| Деталь: | Cover, priority slot (jam access) |
| Парткод: | RM3-0812-000CN |
| Деталь: | COVER, RIGHT |
| Парткод: | RC3-0794-000CN |
| Деталь: | Door, rear |
| Парткод: | RC3-0820-000CN |
| Деталь: | Cover, right-front 1 |
| Парткод: | RC3-0797-000CN |
| Деталь: | Cover, right-front 2 |
| Парткод: | RC3-0798-000CN |
Коды ошибок
10.100X
13.0000
20.0000
21.0000
41.2000
41.3000
49
50.1000
50.2000
50.3000
50.4000
50.7000
50.8000
50.9000
50.x
51.2000
51.2100
51.2200
51.2300
54.0600
54.1200
54.1201
54.1202
54.1203
54.1400
54.1500
54.1501
54.1502
54.1503
54.1599
54.1600
54.1700
54.1800
54.1900
54.2100
55.0000
55.0601
55.0602
55.1000
59.0160
59.0192
59.0240
59.3000
59.4000
59.5000
59.5300
59.6000
59.6300
59.7000
59.7300
59.8000
59.8300
59.9000
79
Описание
| Error code: | 10.100X |
| Display: | 10.100X Supply Memory Error |
| Description: | Supply Memory Error A specific toner cartridge has a faulty or missing memory chip. "X" indicates the cartridge: 0=black, 1=cyan, 2=magenta, 3=yellow. |
| Remedy: | Check the memory chip. If it is broken or damaged, replace the cartridge. Verify that the cartridge is installed in the correct location. Reinstall the toner cartridge. Turn off and then turn on the product. If the error is with a color cartridge, try swapping it with a different color cartridge in the tray. If the same message displays, then there is an engine problem. If a different 10.100X message displays, replace the cartridge. If the problem is not solved, replace the cartridge. |
| Error code: | 13.0000 |
| Display: | 13.0000 |
| Description: | Paper jam |
| Error code: | 20.0000 |
| Display: | 20.0000 |
| Description: | Memory out |
| Error code: | 21.0000 |
| Display: | 21.0000 |
| Description: | Page misfeed or mispick |
| Error code: | 41.2000 |
| Display: | 41.2000 |
| Description: | Beam detect malfunction |
| Error code: | 41.3000 |
| Display: | 41.3000 |
| Description: | Unexpected size |
| Error code: | 49 |
| Display: | Tray 1 Paper Empty |
| Description: | There is no paper in the tray 1. |
| Causes: | Pressure roller thermistor, pressure roller lamp connector, MCU |
| Remedy: | Load paper in the tray 1. |
| Error code: | 50.1000 |
| Display: | 50.1000 |
| Description: | Low fuser temperature error |
| Error code: | 50.2000 |
| Display: | 50.2000 |
| Description: | Slow fuser error |
| Error code: | 50.3000 |
| Display: | 50.3000 |
| Description: | High fuser temperature error |
| Error code: | 50.4000 |
| Display: | 50.4000 |
| Description: | Fuser drive circuit error |
| Error code: | 50.7000 |
| Display: | 50.7000 |
| Description: | Fuser open error Low sub-thermistor fuser error High sub-thermistor fuser error |
| Error code: | 50.8000 |
| Display: | 50.8000 |
| Description: | Low sub-thermistor fuser error |
| Error code: | 50.9000 |
| Display: | 50.9000 |
| Description: | High sub-thermistor fuser error |
| Error code: | 50.x |
| Display: | 50.x Fuser Error |
| Description: | Fuser Error The product has experienced an error with the fuser. |
| Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. Turn off the product, wait at least 25 minutes, and then turn on the product. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
| Error code: | 51.2000 |
| Display: | 51.2000 |
| Description: | Black scanner laser error (inline devices only) |
| Error code: | 51.2100 |
| Display: | 51.2100 |
| Description: | Cyan scanner laser error (inline devices only) |
| Error code: | 51.2200 |
| Display: | 51.2200 |
| Description: | Magenta scanner laser error (inline devices only) |
| Error code: | 51.2300 |
| Display: | 51.2300 |
| Description: | Yellow scanner laser error (inline devices only) |
| Error code: | 54.0600 |
| Display: | 54.0600 |
| Description: | Density sensor error |
| Remedy: | Verify that the cables between the DC controller is firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the DC controller. |
| Error code: | 54.1200 |
| Display: | 54.1200 |
| Description: | Black density measurement abnormality |
| Remedy: | Verify that the cables between the DC controller is firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the DC controller. |
| Error code: | 54.1201 |
| Display: | 54.1201 |
| Description: | Cyan density measurement abnormality |
| Remedy: | Verify that the cables between the DC controller and the ITB are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the ITB. If the error persists, replace the DC controller. |
| Error code: | 54.1202 |
| Display: | 54.1202 |
| Description: | Magenta density measurement abnormality |
| Remedy: | Verify that the cables between the DC controller and the ITB are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the ITB. If the error persists, replace the DC controller. |
| Error code: | 54.1203 |
| Display: | 54.1203 |
| Description: | Yellow density measurement abnormality |
| Remedy: | Verify that the cables between the DC controller and the ITB are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the ITB. If the error persists, replace the DC controller. |
| Error code: | 54.1400 |
| Display: | 54.1400 |
| Description: | Color plane registration sensor error (inline devices only) |
| Remedy: | 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, verify that the cables between the color misregistration sensor and the DC controller are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the toner cartridge tray. If the error persists, replace the DC controller. |
| Error code: | 54.1500 |
| Display: | 54.1500 |
| Description: | Yellow toner level sensor error |
| Error code: | 54.1501 |
| Display: | 54.1501 |
| Description: | Cyan CPR pattern cannot be read |
| Remedy: | 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, verify that the cables between the color misregistration sensor and the DC controller are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the toner cartridge tray. If the error persists, replace the DC controller. |
| Error code: | 54.1502 |
| Display: | 54.1502 |
| Description: | Magenta CPR pattern cannot be read |
| Remedy: | 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, verify that the cables between the color misregistration sensor and the DC controller are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the toner cartridge tray. If the error persists, replace the DC controller. |
| Error code: | 54.1503 |
| Display: | 54.1503 |
| Description: | Yellow CPR pattern cannot be read |
| Remedy: | 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, verify that the cables between the color misregistration sensor and the DC controller are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the toner cartridge tray. If the error persists, replace the DC controller. |
| Error code: | 54.1599 |
| Display: | 54.1599 |
| Description: | Black CPR pattern cannot be read |
| Remedy: | 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, verify that the cables between the color misregistration sensor and the DC controller are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the toner cartridge tray. If the error persists, replace the DC controller. |
| Error code: | 54.1600 |
| Display: | 54.1600 |
| Description: | Magenta toner level sensor error |
| Error code: | 54.1700 |
| Display: | 54.1700 |
| Description: | Cyan toner level sensor error |
| Error code: | 54.1800 |
| Display: | 54.1800 |
| Description: | Black toner level sensor error |
| Remedy: | 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the DC controller. |
| Error code: | 54.1900 |
| Display: | 54.1900 |
| Description: | Bad top-of-page (TOP) sensor |
| Error code: | 54.2100 |
| Display: | 54.2100 |
| Description: | Beam detect (BD) error |
| Remedy: | If the error persists, replace the DC controller. If the error persists, replace the product. |
| Error code: | 55.0000 |
| Display: | 55.0000 |
| Description: | Engine internal communication error |
| Error code: | 55.0601 |
| Display: | 55.0601 |
| Description: | DC controller NVRAM data error. The product has experienced an error with one of the internal sensors. |
| Causes: | DC controller NVRAM data error |
| Remedy: | 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the DC Controller PCB Assembly (HP Part #: RM2-8680-000CN).4. If the error persists, replace the product. |
| Error code: | 55.0602 |
| Display: | 55.0602 |
| Description: | DC controller NVRAM access error. The product has experienced an error with one of the internal sensors. |
| Causes: | DC controller NVRAM access error |
| Remedy: | 1. Reset the printer: a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the DC Controller PCB Assembly (HP Part #: RM2-8680-000CN).4. If the error persists, replace the product. |
| Error code: | 55.1000 |
| Display: | 55.1000 |
| Description: | DC controller memory error |
| Error code: | 59.0160 |
| Display: | 59.0160 |
| Description: | ITB or main motor rotation error (59.A0) |
| Error code: | 59.0192 |
| Display: | 59.0192 |
| Description: | Developer motor rotation error (59.C0) |
| Error code: | 59.0240 |
| Display: | 59.0240 |
| Description: | Transfer alienation failure (59.F0) |
| Error code: | 59.3000 |
| Display: | 59.3000 |
| Description: | Fuser motor startup error |
| Error code: | 59.4000 |
| Display: | 59.4000 |
| Description: | Fuser motor error |
| Error code: | 59.5000 |
| Display: | 59.5000 |
| Description: | Image drum motor startup error - black |
| Error code: | 59.5300 |
| Display: | 59.5300 |
| Description: | Image drum motor startup error - yellow |
| Error code: | 59.6000 |
| Display: | 59.6000 |
| Description: | Image drum motor rotation error - black |
| Error code: | 59.6300 |
| Display: | 59.6300 |
| Description: | Image drum motor rotation error - yellow |
| Error code: | 59.7000 |
| Display: | 59.7000 |
| Description: | Black developer motor startup error |
| Error code: | 59.7300 |
| Display: | 59.7300 |
| Description: | Yellow developer motor startup error |
| Error code: | 59.8000 |
| Display: | 59.8000 |
| Description: | Black developer motor rotation error |
| Error code: | 59.8300 |
| Display: | 59.8300 |
| Description: | Yellow developer motor rotation error |
| Error code: | 59.9000 |
| Display: | 59.9000 |
| Description: | ITB motor start error |
| Error code: | 79 |
| Display: | 79 |
| Description: | No detection of the internal temperature thermistor. |
| Causes: | Harness connection failure of internal temperature thermistor. Internal temperature thermistor failure. Main PCB failure |
| Remedy: | 1 Harness connection failure of internal temperature thermistor Check the harness connection of the internal temperature thermistor, and reconnect it. 2 Internal temperature thermistor failure Replace the internal temperature thermistor. 3 Main PCB failure Replace the main PCB ASSY. |
