HP Color LaserJet CP1520 Pro Series
Рейтинг
Модули
Internal components (3 of 4)
PCA location
Internal components (2 of 4)
Covers, panels, and doors
Internal components (1 of 4)
Internal components (4 of 4)
Детали
| Деталь: | High voltage PCA |
| Парткод: | RM1-7090-000CN |
| Деталь: | Intermediate transfer belt assembly (ITB) |
| Парткод: | RM1-7866-000CN |
| Деталь: | Bushing, left side |
| Парткод: | RC2-2111-000CN |
| Деталь: | Bushing, right side |
| Парткод: | RC2-2112-000CN |
| Деталь: | ROLLER, TRANSFER |
| Парткод: | RM1-4445-000CN |
| Цена: | 1 300 ₽ |
| Деталь: | PAPER FEED GUIDE ASSEMBLY |
| Парткод: | RM1-4448-000CN |
| Деталь: | High voltage PCA |
| Парткод: | RM1-7090-000CN |
| Деталь: | Fuser power supply assembly (110V-127V) |
| Парткод: | RM1-7082-000CN |
| Деталь: | Fuser power supply assembly (220V-240V) |
| Парткод: | RM1-7083-000CN |
| Деталь: | Low voltage power supply assembly (110V-127V) |
| Парткод: | RM1-7080-000CN |
| Деталь: | Low voltage power supply assembly (220V-240V) |
| Парткод: | RM1-7081-000CN |
| Деталь: | Wireless controller PCA |
| Парткод: | RM1-1150-7937CN |
| Деталь: | DC controller PCA |
| Парткод: | RM1-7041-000CN |
| Деталь: | MAIN DRIVE ASSEMBLY |
| Парткод: | RM1-4443-000CN |
| Цена: | 10 300 ₽ |
| Деталь: | Sub drive assembly |
| Парткод: | RM1-7861-000CN |
| Деталь: | DC controller PCA |
| Парткод: | RM1-7090-000CN |
| Деталь: | Low voltage power supply assembly (110V-127V) |
| Парткод: | RM1-7080-000CN |
| Деталь: | Low voltage power supply assembly (220V-240V) |
| Парткод: | RM1-7081-000CN |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | RK2-3129-000CN |
| Деталь: | MOTOR, DC |
| Парткод: | RL1-1617-000CN |
| Деталь: | CABLE, FLAT |
| Парткод: | RK2-1955-000CN |
| Деталь: | CABLE, FLEXIBLE FLAT |
| Парткод: | RK2-3117-000CN |
| Деталь: | COVER, LEFT |
| Парткод: | RC3-0748-000CN |
| Деталь: | COVER, REAR, UPPER |
| Парткод: | RC3-0754-000CN |
| Деталь: | COVER, REAR, LOWER |
| Парткод: | RC3-0753-000CN |
| Деталь: | COVER, REAR, CENTER |
| Парткод: | RC3-0767-000CN |
| Деталь: | Door, front |
| Парткод: | RC3-1024-000CN |
| Деталь: | UPPER COVER ASSEMBLY |
| Парткод: | RM1-7707-000CN |
| Деталь: | Priority slot cover assembly |
| Парткод: | RM1-7706-000CN |
| Деталь: | RIGHT COVER ASSEMBLY |
| Парткод: | RM1-7709-000CN |
| Деталь: | Door, rear |
| Парткод: | RC3-0768-000CN |
| Деталь: | Control-panel assembly (network wireless model) |
| Парткод: | RM1-7708-000CN |
| Деталь: | Control-panel assembly (network model) |
| Парткод: | RM1-7856-000CN |
| Деталь: | Roller, separation assembly |
| Парткод: | RM1-4425-000CN |
| Деталь: | Roller, pickup assembly |
| Парткод: | RM1-4426-000CN |
| Цена: | 240 ₽ |
| Деталь: | Drive assembly, priority slot |
| Парткод: | RM1-4459-000CN |
| Деталь: | Feed assembly, priority |
| Парткод: | RM1-7854-000CN |
| Деталь: | CASSETTE ASSEMBLY |
| Парткод: | RM1-7704-000CN |
| Деталь: | Fuser power supply assembly (220V-240V) |
| Парткод: | RM1-7083-000CN |
| Деталь: | Fuser power supply assembly (110V-127V) |
| Парткод: | RM1-7082-000CN |
| Деталь: | COVER, HOLDER |
| Парткод: | RC2-2014-000CN |
| Цена: | 320 ₽ |
| Деталь: | Fuser assembly (110V-127V) |
| Парткод: | RM1-4430-000CN |
| Деталь: | Fuser assembly (220V-240V) |
| Парткод: | RM1-4431-000CN |
| Цена: | 7 800 ₽ |
| Деталь: | Fuser drive assembly |
| Парткод: | RM1-4450-000CN |
| Деталь: | Cartridge tray assembly |
| Парткод: | RM1-7853-000CN |
| Деталь: | MOTOR, STEPPING, DC |
| Парткод: | RK2-1872-000CN |
Коды ошибок
10.XXXX
49
50.10
50.12
50.2
50.3
50.6
51.XX
54.XX
55.X
57
59.20
59.30
79
Описание
| Error code: | 10.XXXX |
| Display: | 10.XXXX Supply error |
| Description: | The supply memory for one of the print cartridges cannot be read or is missing. • 10.0000 = black supply memory error • 10.0001 = cyan supply memory error • 10.0002 = magenta supply memory error • 10.0003 = yellow supply memory error |
| Remedy: | Reinstall the print cartridge. Turn the product off and then on. If the problem is not solved, replace the cartridge. |
| Error code: | 49 |
| Display: | Tray 1 Paper Empty |
| Description: | There is no paper in the tray 1. |
| Causes: | Pressure roller thermistor, pressure roller lamp connector, MCU |
| Remedy: | Load paper in the tray 1. |
| Error code: | 50.10 |
| Display: | 50.10 |
| Description: | The product has experienced an internal fuser hardware error: Low Fuser temperature error |
| Causes: | Low Fuser temperature error |
| Remedy: | action1. Reset the product:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the product.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the Fusing Assembly: FUSER ASS`Y (110v) RM2-5399-000CN FUSER ASS`Y (220v) RM2-5425-000CN4. If the error persists, replace the product. |
| Error code: | 50.12 |
| Display: | 50.12 |
| Description: | The product has experienced an internal fuser hardware error: Low sub thermistor area 3 fuser error |
| Causes: | Low sub thermistor area 3 fuser error |
| Remedy: | action1. Reset the product:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the product.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the Fusing Assembly: FUSER ASS`Y (110v) RM2-5399-000CN FUSER ASS`Y (220v) RM2-5425-000CN4. If the error persists, replace the product. |
| Error code: | 50.2 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred. fuser warm up service. |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.3 |
| Display: | 50.<X> Fuser To continue turn off then on |
| Description: | A fuser error has occurred. high fuser temperature |
| Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
| Error code: | 50.6 |
| Display: | 50.6 FUSER ERROR |
| Description: | The main or sub thermistors are unable to provide temperature feedback to the ECU. The main and sub thermistors monitor the fuser assembly hot-roller temperature and provide feedback to regulate the fusing temperature. |
| Remedy: | 1. Verify that the seven-wire connector is firmly seated in connector J405 on the ECU. You might have to remove the main cooling fan to see this connection. 2. Verify that the four-wire connector at the rear of the device is firmly seated in the fuser assembly. 3. Verify that the AC voltage is being provided to the fuser assembly. 4. If the message persists, replace the fuser assembly. |
| Error code: | 51.XX |
| Display: | 51.XX Error |
| Description: | Laser Error. An error with the laser/scanner assembly has occurred in the product. • 51.00 = Laser error • 51.20 = Black laser scanner error • 51.30 = Laser error |
| Remedy: | 1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the product. |
| Error code: | 54.XX |
| Display: | 54.XX |
| Description: | The product has experienced an error with one of the internal sensors. |
| Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
| Error code: | 55.X |
| Display: | 55.X Error |
| Description: | The product has experienced an internal error. |
| Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
| Error code: | 57 |
| Display: | Toner Low |
| Description: | The toner cartridge is almost empty. |
| Remedy: | Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations. |
| Error code: | 59.20 |
| Display: | 59.<XY> Printer Error To continue turn off then on |
| Description: | A product error occurred. motor rotation error. |
| Remedy: | - Turn the product off, and then on. - Check connections from the specified motor to the DC controller. - Reseat or reconnect the specified motor. - Replace the print cartridge if the problem is with its motors. - Run a service test. - Replace the specified motor. - Replace the fuser. - Replace the DC controller |
| Error code: | 59.30 |
| Display: | 59.<XY> Printer Error To continue turn off then on |
| Description: | A product error occurred. fuser motor startup error. |
| Causes: | Fuser motor startup error |
| Remedy: | - Turn the product off, and then on. - Check connections from the specified motor to the DC controller. - Reseat or reconnect the specified motor. - Replace the print cartridge if the problem is with its motors. - Run a service test. - Replace the specified motor. - Replace the fuser. - Replace the DC controller |
| Error code: | 79 |
| Display: | 79 |
| Description: | No detection of the internal temperature thermistor. |
| Causes: | Harness connection failure of internal temperature thermistor. Internal temperature thermistor failure. Main PCB failure |
| Remedy: | 1 Harness connection failure of internal temperature thermistor Check the harness connection of the internal temperature thermistor, and reconnect it. 2 Internal temperature thermistor failure Replace the internal temperature thermistor. 3 Main PCB failure Replace the main PCB ASSY. |
