
HP LaserJet M3035 MFP
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
75000
Скорость печати
A4
33
Цветность печати
черно-белая
Общие характеристики |
|
---|---|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Цветность печати |
|
Число страниц в месяц |
75 000 |
Область применения |
средний офис |
Телефон |
|
Факс |
|
Печать фотографий |
|
Сканер |
![]() |
Копир |
![]() |
Тип устройства |
МФУ |
Размещение |
настольный |
Макс. формат |
A4 |
Принтер |
|
Время разогрева |
30 |
Пигментные чернила |
|
Печать без полей |
|
Двусторонняя печать |
![]() |
Прямая печать |
![]() |
Макс, разрешение для ч/б печати |
|
По X | 1 200 |
По Y | 1 200 |
Скорость ч/б печати |
|
A4 | 33 |
Время выхода первого отпечатка |
|
Ч/б | 10 |
Копир |
|
Время выхода первой копии |
10 |
Макс, количество копий за цикл |
999 |
Шаг масштабирования |
0,01 |
Значение масштаба |
|
Минимальное | 0,25 |
Максимальное | 4 |
Макс, разрешение (ч/б) |
|
По Y | 600 |
По X | 1 200 |
Сканер |
|
Оттенки серого |
256 |
Емкость устройства автоподачи оригиналов |
50 |
Тип сканера |
планшетный/протяжный |
Тип датчика сканера |
ПЗС (CCD) |
Устройство автоподачи оригиналов |
двустороннее |
Макс. формат оригинала |
A4 |
Макс, размер сканирования |
|
По Y | 297 |
По X | 216 |
Разрешение сканера |
|
По Х | 600 |
По Y (улучшенное) | 1 200 |
По Х (улучшенное) | 1 200 |
Расходные материалы |
|
Количество картриджей |
1 |
Печать на: |
|
Пленках |
![]() |
Этикетках |
![]() |
Глянцевой бумаге |
![]() |
Конвертах |
![]() |
Фотобумаге |
![]() |
Карточках |
![]() |
Матовой бумаге |
![]() |
Рулоне |
|
CD/DVD |
|
Плотность бумаги |
|
Минимальная | 60 |
Максимальная | 220 |
Факс |
|
Цветной |
|
Телефон |
|
Стандарт DECT |
|
Спикерфон |
|
Проводная трубка |
|
Беспроводная трубка |
|
АОН |
|
Caller ID |
|
Автоответчик |
|
Языки управления |
|
PPDS |
|
PostScript 2 |
|
PostScript 3 |
![]() |
PostScript |
![]() |
![]() |
|
PCL 5e |
![]() |
PCL 6 |
![]() |
Лотки |
|
Подача бумаги |
|
Максимальная | 1 100 |
Стандартная | 600 |
Вывод бумаги |
|
Максимальный | 250 |
Стандартный | 250 |
Финишер |
|
Сортер |
|
Брошюровщик |
|
Степлер |
|
Сортировка со сдвигом |
|
Интерфейсы |
|
USB |
![]() |
Ethernet (RJ-45) |
![]() |
LPT |
|
FireWire (IEEE 1394) |
|
Инфракрасный порт |
|
Устройство для чтения карт памяти |
|
Wi-Fi |
|
Bluetooth |
|
RS-232 |
|
Количество свободных слотов расширения |
1 |
Версия USB |
2,0 |
Память/Процессор |
|
Емкость жесткого диска |
40 |
Макс, объем памяти |
512 |
Объем памяти |
256 |
Частота процессора |
400 |
Процессор |
MIPS |
Дополнительная информация |
|
Экран |
|
Мин. системные требования |
![]() |
Поддержка ОС |
|
Mac OS |
![]() |
Linux |
![]() |
Windows |
![]() |
DOS |
|
Потребляемая мощность |
|
При работе | 1 265 |
В режиме ожидания | 24 |
Габариты |
|
Вес |
27,56 |
Ширина |
426 |
Глубина |
485 |
Высота |
530 |
Модули
Internal components (1 of 6)
DUPLEX
PANEL
Internal components (6 of 6)
COVERS and LABELS
ADF 1
Internal components (4 of 6)
Tray 2 pickup assembly
CASSETTE ASSEMBLY
Internal components (2 of 6)
Internal components (3 of 6)
FRAME L
Internal components (5 of 6)
ADF, scanner assembly
COVERS
Детали Internal components (4 of 6)
Деталь: | Stapler |
Парткод: | CB414-60147 |
Деталь: | Power-supply, stapler |
Парткод: | Q7429-69501 |
Деталь: | Formatter |
Парткод: | Q7819-60001 |
Деталь: | ARM, DOOR |
Парткод: | RC1-4055-000CN |
Цена: | 320 ₽ |
Деталь: | GUIDE, DOOR ARM |
Парткод: | RC1-4056-000CN |
Деталь: | DUCT, SCANNER |
Парткод: | RC1-4128-020CN |
Деталь: | CLIP CLAMP, WIRE |
Парткод: | WT2-5694-000CN |
Цена: | 320 ₽ |
Деталь: | SPRING, TENSION |
Парткод: | RU5-2407-000CN |

Деталь: | Laser/Scanner assembly |
Парткод: | RM1-1521-030CN |
Цена: | 3 900 ₽ |
Деталь: | LINK, LASER SHUTTER |
Парткод: | RC1-4125-000CN |
Деталь: | STAY, TAG HOLDER |
Парткод: | RC1-4126-000CN |
Деталь: | HOLDER, TAG |
Парткод: | RC1-4127-000CN |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2404-000CN |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2405-000CN |
Деталь: | CLIP, CABLE |
Парткод: | WT2-5812-000CN |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000CN |
Деталь: | CLIP, CABLE |
Парткод: | WT2-5056-000CN |
Деталь: | CABLE, MEMORY TAG |
Парткод: | RM1-4054-000CN |
Деталь: | HOLDER, SUB FAN |
Парткод: | RC2-0622-000CN |
Деталь: | Plate, fan shield, left |
Парткод: | RC2-0623-000CN |

Деталь: | Fan, left-side |
Парткод: | RK2-1499-000CN |
Цена: | 1 800 ₽ |
Деталь: | FOOT, RUBBER |
Парткод: | RA0-1003-000CN |
Цена: | 320 ₽ |
Деталь: | HOLDER |
Парткод: | RC1-4009-000CN |
Деталь: | LEVER, GROUNDING CONTACT |
Парткод: | RC1-4065-000CN |
Деталь: | LEVER, GROUNDING CONTACT |
Парткод: | RC1-4066-020CN |
Деталь: | SPRING, LEAF |
Парткод: | RC1-4067-000CN |
Деталь: | PLATE, PROTECTIVE |
Парткод: | RC1-4136-000CN |
Деталь: | CAM, CONTACT |
Парткод: | RC1-4137-020CN |
Деталь: | SPRING, COMPRESSION |
Парткод: | RC1-4140-000CN |
Деталь: | GUIDE, CASSETTE, LEFT FRONT |
Парткод: | RC2-0565-000CN |
Деталь: | GUIDE, CASSETTE, LEFT REAR |
Парткод: | RC2-0566-000CN |
Деталь: | Guide, center plate, left |
Парткод: | RC2-0567-000CN |
Деталь: | Stopper, feed guide, left |
Парткод: | RC2-0585-000CN |
Деталь: | GUIDE, CARTRIDGE, LEFT UPPER |
Парткод: | RC2-0703-000CN |
Деталь: | Guide, cartridge, left lower |
Парткод: | RC2-0704-000CN |
Деталь: | LEVER, DRIVE RELEASE |
Парткод: | RC2-0705-000CN |
Деталь: | Lever, cartridge clamp |
Парткод: | RC2-0706-000CN |
Деталь: | Stopper, cartridge, left |
Парткод: | RC2-0707-000CN |
Цена: | 170 ₽ |
Деталь: | SPRING, TENSION |
Парткод: | RU5-2403-000CN |
Деталь: | SPRING, TORSION |
Парткод: | RU5-2410-020CN |
Деталь: | Connector, snap-tight, black |
Парткод: | VS1-7177-003CN |
Деталь: | Tray, staple |
Парткод: | RC2-0725-000CN |
Деталь: | Plate, I/O |
Парткод: | RC2-0736-000CN |
Деталь: | Cable assembly |
Парткод: | RM1-4053-000CN |

Деталь: | Датчик наличия бумаги |
Парткод: | WG8-5849-000CN |
Цена: | 380 ₽ |

Деталь: | Панель управления, в сборе |
Парткод: | CB414-60157 |
Цена: | 30 600 ₽ |

Деталь: | COVER,MSF |
Парткод: | CB414-67921 |
Цена: | 21 500 ₽ |

Деталь: | Плата форматтера |
Парткод: | Q7819-67902 |
Цена: | 25 800 ₽ |

Деталь: | Плата контроллера питания |
Парткод: | RM1-3775-030CN |
Цена: | 20 400 ₽ |
Деталь: | POWER SWITCH |
Парткод: | RC2-0631-000CN |
Деталь: | HOLDER, SWITCH |
Парткод: | RC2-0632-000CN |
Деталь: | LINK, SWITCH |
Парткод: | RC2-0633-000CN |
Деталь: | HOLDER, SWITCH LINK |
Парткод: | RC2-0634-000CN |
Деталь: | Cable guide |
Парткод: | WT2-5678-000CN |
Деталь: | Roller assembly, bottom plate |
Парткод: | RM1-3727-000CN |
Деталь: | HOLDER, INTERLOCK |
Парткод: | RC2-0595-000CN |
Деталь: | MICROSWITCH |
Парткод: | RK2-0534-000CN |
Деталь: | Cushion, right lower |
Парткод: | RC2-0468-000CN |
Деталь: | FOOT, RUBBER |
Парткод: | RA0-1003-000CN |
Цена: | 320 ₽ |
Деталь: | Guide, cartridge, upper-right |
Парткод: | RC2-0492-000CN |
Деталь: | MOUNT, SOLENOID |
Парткод: | RC2-0498-000CN |
Деталь: | Guide, cassette, front-right |
Парткод: | RC2-0559-000CN |
Деталь: | Guide, cassette, back-right |
Парткод: | RC2-0560-000CN |
Деталь: | Guide, center plate, right |
Парткод: | RC2-0561-000CN |
Деталь: | Holder, option connector |
Парткод: | RC1-0562-000CN |
Деталь: | Guide, cartridge, lower-right |
Парткод: | RC2-0700-000CN |
Деталь: | Stopper, cartridge, right |
Парткод: | RC2-0702-000CN |
Деталь: | CONNECTOR, DRAWER |
Парткод: | VS1-7257-007CN |
Деталь: | Cable guide |
Парткод: | WT2-5056-000CN |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000CN |

Деталь: | BUSHING |
Парткод: | RC1-3665-000CN |
Цена: | 110 ₽ |

Деталь: | ROLLER, FACE-DOWN |
Парткод: | RC1-3994-000CN |
Цена: | 230 ₽ |
Деталь: | SPRING, TORSION |
Парткод: | RC2-0665-000CN |
Деталь: | Plate, face-up shield |
Парткод: | RC2-0697-000CN |
Деталь: | Connector, snap-tight, black |
Парткод: | VS1-7177-004CN |
Деталь: | PHOTO-INTERRUPTER |
Парткод: | WG8-5624-000CN |
Деталь: | Roller assembly, face-down |
Парткод: | RM1-3749-000CN |
Цена: | 900 ₽ |

Деталь: | SOLENOID |
Парткод: | RK2-1492-000CN |
Цена: | 190 ₽ |
Деталь: | Cable, option interface |
Парткод: | RM1-4062-000CN |
Деталь: | Roller assembly, delivery |
Парткод: | RM1-1497-000CN |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005CN |
Цена: | 140 ₽ |

Деталь: | Кассета на 500 листов |
Парткод: | RM1-3732-000CN |
Цена: | 5 300 ₽ |
Деталь: | Верхняя крышка |
Парткод: | RM1-3772-030CN |
Деталь: | Правая передняя крышка |
Парткод: | RM1-3776-000CN |
Цена: | 1 200 ₽ |
Деталь: | Кассета на 500 листов |
Парткод: | RM1-3796-000CN |
Цена: | 11 900 ₽ |

Деталь: | Автоподатчик документов, в сборе |
Парткод: | CB414-67928 |
Цена: | 34 300 ₽ |

Деталь: | Узел захвата бумаги из автоподатчика документов, в сборе |
Парткод: | CC334-60068 |
Цена: | 2 000 ₽ |

Деталь: | Площадка отделения бумаги из автоподатчика документов, в сборе |
Парткод: | Q2665-60125 |
Цена: | 800 ₽ |
Деталь: | GUIDE, DUPLEX INLET |
Парткод: | RC1-4096-000CN |

Деталь: | Feed assembly, lower |
Парткод: | RM1-3759-000CN |
Цена: | 1 300 ₽ |
Деталь: | POWER SUPPLY |
Парткод: | RM1-3758-000CN |
Цена: | 8 200 ₽ |

Деталь: | PAPER FEED GUIDE ASSEMBLY |
Парткод: | RM1-3760-000CN |
Цена: | 800 ₽ |
Деталь: | PLATE, GROUNDING |
Парткод: | RC1-4085-000CN |

Деталь: | Position guide assembly |
Парткод: | RM1-1506-000CN |
Цена: | 1 000 ₽ |
Деталь: | Sensor PCA, top-of-page |
Парткод: | RM1-4040-000CN |
Деталь: | Sensor PCA, width |
Парткод: | RM1-4042-000CN |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005CN |
Цена: | 140 ₽ |
Деталь: | SCREW W/WASHER, M3X6 |
Парткод: | XB2-7300-605CN |
Деталь: | Tray 2 pickup assembly |
Парткод: | RM1-3762-000CN |
Деталь: | Pickup roller assembly, tray 2 |
Парткод: | RM1-3763-000CN |
Деталь: | Sensor flag assembly, tray 2 |
Парткод: | RM1-3769-000CN |
Деталь: | Cable, sensor, tray 2 |
Парткод: | RM1-4060-000CN |

Деталь: | Pickup roller, tray 2 |
Парткод: | RL1-1370-000CN |
Цена: | 270 ₽ |
Деталь: | Photo-interrupter, tray 2 |
Парткод: | WG8-5624-000CN |

Деталь: | Узел захвата бумаги из кассеты, в сборе |
Парткод: | 5851-4012 |
Цена: | 3 500 ₽ |

Деталь: | Дополнительный лоток для бумаги на 500 листов |
Парткод: | Q7817A |
Цена: | 8 100 ₽ |
Деталь: | Ось привода ролика захвата бумаги из кассеты |
Парткод: | RC2-8532-000 |
Цена: | 270 ₽ |

Деталь: | Ролик захвата бумаги из лотка ручной подачи |
Парткод: | RL1-0569-000CN |
Цена: | 380 ₽ |

Деталь: | Привод узла выхода бумаги |
Парткод: | RM1-1522-020CN |
Цена: | 320 ₽ |

Деталь: | Площадка отделения бумаги из кассеты |
Парткод: | RM1-3738-000CN |
Цена: | 390 ₽ |

Деталь: | Ролик захвата бумаги из кассеты, в сборе |
Парткод: | RM1-6323-000CN |
Цена: | 800 ₽ |
Деталь: | LEVER, COUPLING |
Парткод: | RC1-4115-000CN |
Деталь: | CAM |
Парткод: | RC1-4114-000CN |
Деталь: | LEVER, DRIVE RELEASE |
Парткод: | RC1-4116-000CN |
Деталь: | LINK, DRIVE RELEASE |
Парткод: | RC1-4117-000CN |
Деталь: | Film, fuser drive side plate |
Парткод: | RC2-0649-000CN |
Деталь: | DUCT, CARTRIDGE |
Парткод: | RC2-0590-000CN |
Деталь: | Pendulum assembly |
Парткод: | RM1-3748-000CN |
Деталь: | Drive release assembly |
Парткод: | RM1-1522-000CN |
Деталь: | Guide, air |
Парткод: | RC2-0648-000CN |
Деталь: | Stopper, fuser |
Парткод: | RC2-0657-000CN |
Деталь: | BUSHING, INNER |
Парткод: | RC2-0701-000CN |
Цена: | 950 ₽ |
Деталь: | GEAR, 65T |
Парткод: | RU5-0962-000CN |
Цена: | 850 ₽ |

Деталь: | MOTOR, STEPPING |
Парткод: | RK2-1489-000CN |
Цена: | 1 800 ₽ |

Деталь: | Fixing drive side plate assembly |
Парткод: | RM1-3746-000CN |
Цена: | 1 800 ₽ |
Деталь: | GEAR, 201T |
Парткод: | RU5-0950-000CN |
Цена: | 1 400 ₽ |

Деталь: | GEAR, 20T/20T |
Парткод: | RU5-0956-000CN |
Цена: | 130 ₽ |

Деталь: | GEAR, 20T |
Парткод: | RU5-0957-000CN |
Цена: | 120 ₽ |

Деталь: | Gear, 17T/17T |
Парткод: | RU5-0958-000CN |
Цена: | 100 ₽ |

Деталь: | GEAR, 19T |
Парткод: | RU5-0959-000CN |
Цена: | 110 ₽ |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2401-000CN |
Цена: | 320 ₽ |
Деталь: | GEAR, 12T |
Парткод: | RU5-0394-000CN |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2920-000CN |
Деталь: | E-ring |
Парткод: | XD2-1100-402CN |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000CN |
Деталь: | SCREW, RS, M3X8 |
Парткод: | XA9-1500-000CN |
Деталь: | COVER, MAIN MOTOR |
Парткод: | RC1-4108-000CN |
Деталь: | COVER, GEAR |
Парткод: | RC2-0579-000CN |
Деталь: | WASHER |
Парткод: | RC2-0652-000CN |
Деталь: | Motor, dc, 26.2 W |
Парткод: | RK2-1488-000CN |
Цена: | 1 000 ₽ |
Деталь: | GEAR, 16T |
Парткод: | RU5-0951-000CN |
Цена: | 1 100 ₽ |
Деталь: | GEAR, 43T |
Парткод: | RU5-0955-000CN |
Цена: | 550 ₽ |
Деталь: | GEAR, 31T |
Парткод: | RU5-0960-000CN |
Цена: | 900 ₽ |
Деталь: | BUSHING, TRANSFER, RIGHT |
Парткод: | RC1-0922-000CN |
Цена: | 230 ₽ |

Деталь: | Transfer roller assembly |
Парткод: | RM1-1508-000CN |
Цена: | 500 ₽ |

Деталь: | PAD, SEPARATION |
Парткод: | RC1-0939-000CN |
Цена: | 240 ₽ |
Деталь: | GUIDE, FEED |
Парткод: | RC1-3935-000CN |
Деталь: | COVER, REGISTRATION |
Парткод: | RC1-3936-020CN |

Деталь: | ARM, PAD |
Парткод: | RC1-3937-000CN |
Деталь: | GEAR, 12T |
Парткод: | RU5-0400-000CN |
Деталь: | ELIMINATOR, STATIC CHARGE |
Парткод: | RC1-4025-000CN |
Цена: | 340 ₽ |
Деталь: | LEVER, SENSOR |
Парткод: | RC1-4027-000CN |
Цена: | 250 ₽ |
Деталь: | SPRING, TORSION |
Парткод: | RC1-4028-000CN |
Деталь: | SPRING, TORSION |
Парткод: | RC1-4059-000CN |
Деталь: | LEVER |
Парткод: | RC1-4060-000CN |
Деталь: | SPRING, TORSION |
Парткод: | RC1-4061-000CN |

Деталь: | Roller, tray 1 pick-up |
Парткод: | RL1-0568-000CN |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000CN |
Деталь: | SHEET, STATIC CHARGE |
Парткод: | RC1-4069-000CN |
Деталь: | SHEET, STATIC CHARGE |
Парткод: | RC1-4070-000CN |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2408-000CN |
Деталь: | REGISTRATION ASSEMBLY |
Парткод: | RM1-3715-000CN |
Цена: | 2 600 ₽ |
Деталь: | Tray 1 pickup roller assembly |
Парткод: | RM1-3716-000CN |
Деталь: | Transfer guide assembly, lower |
Парткод: | RM1-3757-000CN |
Деталь: | STOPPER, GEAR |
Парткод: | RC1-4189-000CN |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2385-000CN |
Деталь: | Arm, width-sensor |
Парткод: | RC2-0575-000CN |
Деталь: | SPRING, TORSION |
Парткод: | RC2-0576-000CN |
Деталь: | Cable, delivery sensor |
Парткод: | RM1-4057-000CN |

Деталь: | GEAR, 17T |
Парткод: | RA0-1172-000CN |
Цена: | 850 ₽ |
Деталь: | Spring compression |
Парткод: | RC2-0483-000CN |
Деталь: | GEAR, 14T |
Парткод: | RU5-0409-000CN |
Деталь: | GEAR, 30T |
Парткод: | RU5-0366-000CN |
Цена: | 180 ₽ |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005CN |
Цена: | 140 ₽ |

Деталь: | Подшипник прижимного вала |
Парткод: | RC1-3609-020 |
Цена: | 120 ₽ |

Деталь: | Подшипник прижимного вала |
Парткод: | RC1-3610-000 |
Цена: | 120 ₽ |
Деталь: | Прижимной вал |
Парткод: | RC2-0671-000CN |
Цена: | 2 100 ₽ |

Деталь: | Термоплёнка |
Парткод: | RG5-5570-FILM |
Деталь: | Нагревательный элемент узла термозакрепления |
Парткод: | RM1-1531-HEAT |
Цена: | 700 ₽ |

Деталь: | CONTROL PANEL PCB ASSY, DCP-J515W/ DCP-J715W |
Парткод: | RM1-3761-020CN |
Цена: | 13 500 ₽ |

Деталь: | Шестерня прижимного вала |
Парткод: | RU5-0964-000 |
Цена: | 100 ₽ |

Деталь: | Solenoid, tray 1 |
Парткод: | RK2-1490-000CN |
Цена: | 550 ₽ |
Деталь: | Pick-up roller gear assembly |
Парткод: | RM1-3714-000CN |
Цена: | 700 ₽ |

Деталь: | Roller stay assembly |
Парткод: | RM1-1485-000CN |
Цена: | 1 200 ₽ |
Деталь: | SPRING, TORSION |
Парткод: | RU5-2386-000CN |
Деталь: | Sensor PCA, multipurpose |
Парткод: | RM1-4041-000CN |
Деталь: | Cover, face-up-sensor cable |
Парткод: | RC2-0739-000CN |
Деталь: | Holder, cable |
Парткод: | RC2-0588-000CN |
Деталь: | HOLDER, MAIN FAN |
Парткод: | RC2-0592-000CN |
Деталь: | Static wire, right-side fan |
Парткод: | RC2-0593-000CN |

Деталь: | Fan, right-side |
Парткод: | RK2-1497-000CN |
Цена: | 750 ₽ |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000CN |

Деталь: | LEVER, SENSOR |
Парткод: | RC1-3939-000CN |
Цена: | 250 ₽ |
Деталь: | Cable guide |
Парткод: | WT2-5694-000CN |
Цена: | 320 ₽ |
Деталь: | Screw, tapping, M3x6 |
Парткод: | XA9-1503-000CN |
Деталь: | GUIDE |
Парткод: | RC1-4083-000CN |
Деталь: | Cable guide |
Парткод: | WT2-5678-000CN |
Деталь: | Tray 2 pickup assembly |
Парткод: | RM1-3762-000CN |
Деталь: | Fuser, 110-127 V |
Парткод: | RM1-3740-000CN |
Деталь: | Fuser, 220-240 V |
Парткод: | RM1-3741-000CN |
Деталь: | ECU, 110-127 V |
Парткод: | RM1-3774-000CN |
Деталь: | ECU, 220-240 V |
Парткод: | RM1-3775-000CN |

Деталь: | GEAR ASSEMBLY |
Парткод: | RM1-3712-000CN |
Цена: | 1 700 ₽ |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005CN |
Цена: | 140 ₽ |
Деталь: | SCREW W/WASHER, M3X6 |
Парткод: | XB2-7300-605CN |
Деталь: | CONTROL PANEL |
Парткод: | CB414-60101 |

Деталь: | COVER, ADF |
Парткод: | CB414-67902 |
Деталь: | ADF feed roller kit |
Парткод: | CB41467904 |

Деталь: | Input tray, ADF |
Парткод: | CB414-67903 |
Цена: | 2 600 ₽ |
Деталь: | ADF ASSEMBLY |
Парткод: | CB414-67916 |
Деталь: | Scanner assembly (ADF assembly is not included) |
Парткод: | CB414-67905 |
Деталь: | Cover, right-side (DIMM cover) |
Парткод: | RC2-0722-000CN |
Деталь: | COVER, RIGHT LOWER |
Парткод: | RC2-0603-000CN |
Цена: | 900 ₽ |
Деталь: | COVER, RIGHT FRONT |
Парткод: | RL1-1723-000CN |
Деталь: | COVER, FAX |
Парткод: | RC2-0726-000CN |
Деталь: | Cover, I/O |
Парткод: | RC2-0612-000CN |
Цена: | 550 ₽ |
Деталь: | TOP COVER ASSEMBLY |
Парткод: | RM1-3772-000CN |
Деталь: | COVER, LEFT |
Парткод: | RM1-3773-000CN |

Деталь: | Tray 1 cover assembly |
Парткод: | RM1-3723-000CN |
Цена: | 2 200 ₽ |

Деталь: | REAR COVER ASSEMBLY |
Парткод: | RM1-3724-000CN |
Цена: | 2 600 ₽ |
Деталь: | Cartridge door assembly |
Парткод: | RM1-3722-000CN |
Цена: | 4 100 ₽ |

Деталь: | HINGE, LEFT |
Парткод: | RC1-4057-000CN |
Цена: | 360 ₽ |

Деталь: | HINGE, RIGHT |
Парткод: | RC1-4058-000CN |
Цена: | 320 ₽ |
Деталь: | SPRING, TENSION |
Парткод: | RU5-2388-000CN |

Деталь: | Tray 1 assembly |
Парткод: | RM1-1490-000CN |
Цена: | 1 600 ₽ |
Деталь: | Flag assembly, full detect |
Парткод: | RM1-3742-000CN |
Деталь: | Flag assembly, face-down |
Парткод: | RM1-3743-000CN |
Деталь: | Cover, stapler |
Парткод: | RM1-3790-000CN |
Деталь: | Cover, fax internal (fax rail) |
Парткод: | RC2-0729-000CN |
Деталь: | Paper clip tray |
Парткод: | RC2-0724-000CN |
Деталь: | Stapler door (for devices with staplers) |
Парткод: | CB414-40064 |
Деталь: | Cover (replaces the stapler door for devices without staplers) |
Парткод: | RC2-0727-000CN |
Деталь: | COVER, LEGAL |
Парткод: | RL1-1366-000CN |
Коды ошибок
10.10.00
10.32.00
11.XX
13.00.02
13.01.00
13.05.00
13.15.00
13.20
13.31.00
13.67.00
13.XX.YY
20
21
22
30.1.YY
40
41.3
41.X
49.XXXXX
50.1
50.2
50.3
50.4
50.5
50.6
51.XY
52.00
53.XY
54.XX
55.05
55.XX.YY
56.XX
57.03
57.04
59.50
62
64
68.X
79.XXXX
8X.YYYY
Описание
Error code: | 10.10.00 |
Display: | 10.10.00 SUPPLY MEMORY ERROR |
Description: | The product has experienced a print cartridge error. |
Remedy: | 1. Ensure that the cartridge is a genuine HP print cartridge. 2. Verify the connector at J74 on the DC controller PCA is securely connected. 3. Replace the print cartridge. |
Error code: | 10.32.00 |
Display: | 10.32.00 - Unauthorized Supply |
Description: | A supply has been installed that does not pass the authentication test for genuine HP supplies. |
Remedy: | If you believe you purchased a genuine HP supply, visit us at www.hp.com/go/ anticounterfeit. Any repair required as a result of using non-HP supplies or unauthorized supplies are not covered under warranty. HP cannot ensure the accuracy or the availability of certain features. To continue printing, touch OK. |
Error code: | 11.XX |
Display: | 11.XX INTERNAL CLOCK ERROR |
Description: | The real time clock has experienced an error. |
Remedy: | 1. Power cycle the product to see if the message clears. 2. If possible, print a configuration page to record product information, and then perform an NVRAM initialization routine. If the initialization routine is successful, you will need to re-enter several configuration parameters (such as the page count and the serial number). 3. If the error persists, replace the formatter PCA. |
Error code: | 13.00.02 |
Display: | 13.00.02 JAM IN TRAY 1 |
Description: | Paper is fed from tray 2 to the device by the tray 2 pick-up roller. When energized, solenoid SL2 releases a clutch, and then the pick-up roller rotates to pick up the paper and advance it into the paper path. |
Remedy: | 1. Verify that the type and quality of the media that you are using meet HP specifications. 2. Verify that the media is loaded correctly and that the guides are not too tight or too loose against the stack of media. 3. Verify that the tray 2 pickup roller and separation pad are installed correctly. 4. Verify that solenoid SL2 is being energized. If you cannot hear it during a print job, remove tray 2, override the paper presence sensor flag, start a print job, and then see if the pick-up roller is rotating. 5. Verify that solenoid SL2 is firmly seated in connector J504 on the ECU. |
Error code: | 13.01.00 |
Display: | 13.01.00 Jam in Tray 1 |
Description: | The Tray 1 pickup roller or solenoid might not be working correctly. |
Remedy: | 1. Load paper in Tray 1, and then use the paper path test to pull paper. Verify that the roller rotates. 2. If someone has performed maintenance on the product recently, verify that the Tray 1 pickup roller, feed roller, and separation roller have been installed correctly. 3. From the DIAGNOSTICS menu, run the multipurpose tray (Tray 1) solenoid component test to verify that the solenoid moves when energized. Listen for an audible “click” when the test is initiated. If the solenoid is not being energized, verify that the solenoid connector is attached to connector J71 on the DC controller PCA. 4. If the error persists, replace the Tray 1 solenoid (SL102). |
Error code: | 13.05.00 |
Display: | 13.05.00 JAM INSIDE TOP COVER |
Description: | Paper failed to reach the delivery sensor within a specified period of time when a print job was initiated. When troubleshooting paper jams, always observe where the leading edge of the paper stops in the jam. |
Remedy: | 1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that the fuser motor (M2) connector is firmly seated. The fuser motor wiring is hard-wired to the back of the ECU at connector J501. The motor connector is free-standing behind the ECU. To see if the fuser motor is functional, observe the output stacker rollers while turning on the device. If the rollers rotate, the motor is functional. If they do not rotate, verify the connection. |
Error code: | 13.15.00 |
Display: | 13.15.00 - Jam inside front door Remove print cartridge |
Description: | Media is jammed in the fuser area. |
Remedy: | Follow the instructions in the onscreen dialog box. If the message persists, check the thermistor delivery sensor (J405) and delivery sensor (SR2) cable connections. |
Error code: | 13.20 |
Display: | 13.20 - Jam inside rear bin Clear jam then open and close front door |
Description: | Media is jammed in the output bin. |
Remedy: | Open the rear output bin and gently remove the jammed media. Follow the instructions in the onscreen dialog box. |
Error code: | 13.31.00 |
Display: | 13.31.00 JAM INSIDE FRONT DOOR |
Description: | A jam has occurred inside the front door. |
Remedy: | 1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that the face-up tray sensor (PS1) is functioning properly. 3. Verify that connection J505 is firmly seated on the ECU. 4. Open and close the cartridge door to clear the error message |
Error code: | 13.67.00 |
Display: | 13.67.00 - Jam inside front door |
Description: | Media is jammed in the paper path. |
Remedy: | Follow the instructions in the onscreen dialog box. If the message persists, check the HVPS ribbon-cable connection at J404. |
Error code: | 13.XX.YY |
Display: | 13.XX.YY - Remove Tray 2 Clear jam then touch OK |
Description: | Media is jammed in the duplex area. |
Remedy: | Follow the instructions in the onscreen dialog box. |
Error code: | 20 |
Description: | Vertical image or label drift |
Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
Error code: | 21 |
Description: | The bar code printed on a label does not scan. |
Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
Error code: | 22 |
Description: | Loss of printing registration on labels. Excessive vertical drift in top-of-form registration. |
Causes: | The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly. |
Remedy: | Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58. |
Error code: | 30.1.YY |
Display: | 30.1.YY Scanner failure |
Description: | An error has occurred in the scanner. |
Remedy: | 1. Make sure that the scanner lock is in the unlocked position. 2. Turn the device off and then on. 3. Check the cable connections between the ADF/scanner assembly and the formatter. 4. If this message persists, replace the scanner assembly. 5. If, after replacing the scanner assembly, the message persists, replace the formatter |
Error code: | 40 |
Display: | Scanner locked |
Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
Error code: | 41.3 |
Display: | 41.3 UNEXPECTED SIZE IN TRAY <X> |
Description: | You have configured the tray for a different size of paper than the print job requires. NOTE: This error can be caused by a multi feed problem. Open, and then close, the cartridge door to clear the error message. If the error persists, and the tray is correctly configured, try cleaning the Tray 1 pickup roller (or you might have to replace the roller). |
Remedy: | 1. Reload the tray with the correct paper size. 2. Make sure the paper size that is specified in the software program, the printer driver, and the control panel are all the same. 3. Press the OK button and scroll to the TRAY <X> SIZE = <Size> option. Reconfigure the size in a tray to match the size required for the print job. 4. If the error does not clear, turn the product off and then on. 5. If the message persists, contact an HPauthorized service or support provider. |
Error code: | 41.X |
Display: | 41.X ERROR |
Description: | A temporary printing error occurred. |
Remedy: | 1. Press OK to see if the page will print. If necessary, turn the product off and then on. 2. Verify that the loaded paper meets HP specifications. If pages stick together, the paper detect sensors will detect a sheet of paper longer than what is expected in the product. 3. Verify that all paper size settings on the control panel, in the print driver settings, and in the software program match. 4. Verify that the correct size paper is loaded in the input tray. |
Error code: | 49.XXXXX |
Display: | 49.XXXXX ERROR |
Description: | A critical firmware error has occurred. |
Remedy: | 1. Turn the device off and then on. 2. Try to determine whether the error occurs intermittently, while printing, or when turning on the device. 3. If the error appears while printing, determine whether it occurs when printing from a specific computer, a specific application, or a specific file. If all other computers, applications, or files can print without the error, then the problem may be only within one print job or computer. Make sure the computer has the most current printer drivers, or use a generic printer driver. 4. Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the one installed on the device and the device can receive a firmware update, download the newer firmware upgrade. 5. Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job, contact the software vendor for assistance. 6. If the message persists, contact HP Support |
Error code: | 50.1 |
Display: | 50.1 FUSER ERROR |
Description: | AC power is not being provided to the fuser assembly. AC voltage is necessary to generate heat in the fuser assembly. |
Remedy: | 1. Verify that the fuser power cable at the back of the device is connected and the ECU is fully seated. 2. If the message persists, replace the fuser assembly. |
Error code: | 50.2 |
Display: | 50.<X> Fuser To continue turn off then on |
Description: | A fuser error has occurred. fuser warm up service. |
Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
Error code: | 50.3 |
Display: | 50.<X> Fuser To continue turn off then on |
Description: | A fuser error has occurred. high fuser temperature |
Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
Error code: | 50.4 |
Display: | 50.<X> Fuser To continue turn off then on |
Description: | A fuser error has occurred.f aulty fuser. |
Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
Error code: | 50.5 |
Display: | 50.<X> Fuser To continue turn off then on |
Description: | A fuser error has occurred. inconsistent fuser. |
Remedy: | - Turn the product off, and then on. - Reseat the connection to the fuser and the DC controller. - Replace the fuser. - Replace the upper cable guide assembly. - Replace the low voltage power supply. - Replace the DC controller |
Error code: | 50.6 |
Display: | 50.6 FUSER ERROR |
Description: | The main or sub thermistors are unable to provide temperature feedback to the ECU. The main and sub thermistors monitor the fuser assembly hot-roller temperature and provide feedback to regulate the fusing temperature. |
Remedy: | 1. Verify that the seven-wire connector is firmly seated in connector J405 on the ECU. You might have to remove the main cooling fan to see this connection. 2. Verify that the four-wire connector at the rear of the device is firmly seated in the fuser assembly. 3. Verify that the AC voltage is being provided to the fuser assembly. 4. If the message persists, replace the fuser assembly. |
Error code: | 51.XY |
Display: | 51.XY ERROR |
Description: | A laser/scanner error has occurred. |
Remedy: | 1. From the DIAGNOSTICS menu, run the laser/scanner motor component test. Verify that you can hear motor rotate. 2. If you cannot hear the motor rotate, verify that the connections to connector J86 and connector J93 on the DC controller PCA are firmly seated. 3. Verify that the wiring harness at the laser/scanner assembly is securely attached. 4. If the error persists, replace the laser/ scanner assembly. |
Error code: | 52.00 |
Display: | 52.00 ERROR |
Description: | A scanner motor error has occurred. Scanner motor rotation is verified at the initialization of a print job. |
Remedy: | 1. Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly. 2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection. 3. Verify that the ribbon cable installed in connector J403 on the ECU is fully seated You must remove the ECU in order to verify this connection. 4. If the message persists, replace the laser/scanner assembly. |
Error code: | 53.XY |
Display: | 53.XY.ZZ CHECK RAM DIMM SLOT <X> To continue turn off then on |
Description: | A problem exists with the device memory. The DIMM that caused the error will not be used. X description: 0 onboard memory 1 slot 1 |
Remedy: | You might need to reinstall or replace the specified DIMM. 1. Turn the device off, and then replace the DIMM that caused the error. 2. If, after replacing the DIMM, the message persists, replace the formatter. |
Error code: | 54.XX |
Display: | 54.XX |
Description: | The product has experienced an error with one of the internal sensors. |
Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
Error code: | 55.05 |
Display: | 55.05 Engine Firmware RFU Error To continue turn off then on |
Description: | An issue caused the firmware upgrade to fail. |
Remedy: | - Turn the product off, and then on. - Restart the firmware upgrade. - If the problem continues, try a different firmware file. |
Error code: | 55.XX.YY |
Display: | 55.XX.YY DC CONTROLLER ERROR |
Description: | A temporary printing error occurred. |
Remedy: | 1. Turn the product off and then on. 2. Remove any third-party memory or USB device, and then turn the product off and then on. 3. Remove and then reinstall the formatter. 4. If the error persists, remove the formatter and perform an engine test. If the engine test page fails to print, replace the DC controller. If the engine test page prints, replace the formatter. |
Error code: | 56.XX |
Display: | 56.XX ERROR |
Description: | A temporary printing error occurred as a result of an incorrect input or output request. |
Remedy: | • Turn the product off and then on. • If the message persists, contact an HPauthorized service or support provider. |
Error code: | 57.03 |
Display: | 57.03 ERROR |
Description: | Fan FN102 has experienced an error. |
Remedy: | 1. Inspect fan FN102 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J75 on the DC controller PCA is securely seated. 3. If the error persists, replace the fan. |
Error code: | 57.04 |
Display: | 57.04 ERROR |
Description: | Fan FN101 has experienced an error. |
Remedy: | 1. Inspect fan FN101 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J64 on the power supply PCA is securely seated. 3. If the error persists, replace the fan. |
Error code: | 59.50 |
Display: | 59.50 ERROR |
Description: | A main motor (M1) error has occurred. Motor operation is verified during device power-up. |
Remedy: | 1. Turn the device off and then on. 2. Verify that nothing is hindering the main motor. If necessary, remove all paper trays and the print cartridge, and then turn on the device and listen for motor operation. 3. Verify that the main motor is connected to connector J407 on the ECU. You might have to remove the main cooling fan to see this connection. 4. If the message persists, replace the motor. |
Error code: | 62 |
Display: | Nongenuine Toner Replace Toner |
Description: | The toner cartridge installed is not a genuine cartridge. |
Causes: | · Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board |
Remedy: | This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge. |
Error code: | 64 |
Display: | Toner Exhausted Replace Toner 1 |
Description: | Cover Open |
Causes: | The Printer Cover is open or Toner Cartridge not installed. |
Error code: | 68.X |
Display: | 68.X STORAGE ERROR SETTINGS CHANGED |
Description: | An error occurred in the product permanent storage and one or more product settings has been reset to its factory default. |
Remedy: | Press OK to resume printing. Print a configuration page and check the product settings to determine which values have changed. If the error does not clear, turn the product off and then on. If the message persists, contact an HP-authorized service or support provider. |
Error code: | 79.XXXX |
Display: | 79.XXXX ERROR |
Description: | The product detected a critical hardware error. |
Remedy: | • Press the stop button to clear the print job from the product memory. Turn the product off and then on. • Try printing a job from a different program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain program or print job, contact the software vendor for assistance. If the message persists with different programs and print jobs, try these steps. • Turn the product off. • Disconnect all cables to the product that connect it to the network or computer. • Remove all the memory DIMMs or thirdparty DIMMs from the product. Then reinstall the memory DIMM. • Remove the EIO device from the product. • Turn the product on. If the error no longer exists, follow these steps. • Install the DIMM and EIO device one at a time, making sure to turn the product off and then on as you install each device. • Replace the DIMM or EIO device if you determine that it causes the error. • Reconnect all cables that connect the product to the network or computer. |
Error code: | 8X.YYYY |
Display: | 8X.YYYY EMBEDDED JETDIRECT ERROR |
Description: | The embedded HP Jetdirect print server has encountered a critical error. |
Remedy: | • Turn the product off and then on. • If the message persists, contact an HPauthorized service or support provider. |