HP LaserJet P3005x
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
100000
Скорость печати
A4
33
Цветность печати
черно-белая
Общие характеристики |
|
---|---|
Размещение |
настольный |
Область применения |
большой офис |
Число страниц в месяц |
100 000 |
Цветность печати |
|
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Макс. формат |
A4 |
Тип устройства |
Принтер |
Телефон |
|
Печать фотографий |
|
Копир |
|
Факс |
|
Сканер |
|
Принтер |
|
Прямая печать |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
По Y | 1 200 |
По X | 1 200 |
Скорость ч/б печати |
|
A4 | 33 |
Время выхода первого отпечатка |
|
Ч/б | 9,5 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Стандарт WIA |
|
Расходные материалы |
|
Количество картриджей |
1 |
Печать на: |
|
Рулоне | |
CD/DVD | |
Карточках | |
Пленках | |
Глянцевой бумаге | |
Конвертах | |
Этикетках | |
Матовой бумаге | |
Фотобумаге | |
Плотность бумаги |
|
Минимальная | 60 |
Максимальная | 200 |
Факс |
|
Цветной |
|
Телефон |
|
АОН |
|
Проводная трубка |
|
Caller ID |
|
Автоответчик |
|
Стандарт DECT |
|
Спикерфон |
|
Беспроводная трубка |
|
Шрифты и языки управления |
|
Языки управления |
|
PostScript 2 | |
PCL 5c | |
PPDS | |
PCL 5e | |
PostScript 3 | |
PostScript | |
Количество установленных шрифтов |
|
PCL | 103 |
PostScript | 93 |
Лотки |
|
Подача бумаги |
|
Стандартная | 1 100 |
Максимальная | 1 100 |
Вывод бумаги |
|
Максимальный | 250 |
Стандартный | 250 |
Финишер |
|
Степлер |
|
Сортировка со сдвигом |
|
Брошюровщик |
|
Электронная сортировка |
|
Сортер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Количество свободных слотов расширения |
1 |
RS-232 |
|
LPT |
|
Bluetooth |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
Инфракрасный порт |
|
USB |
|
Ethernet (RJ-45) |
|
Память/Процессор |
|
Объем памяти |
80 |
Процессор |
Motorola ColdFire версия V5 |
Частота процессора |
400 |
Макс, объем памяти |
320 |
Дополнительная информация |
|
Мин. системные требования |
|
Экран |
|
Поддержка ОС |
|
DOS | |
Windows | |
Linux | |
Mac OS | |
Потребляемая мощность |
|
При работе | 600 |
В режиме ожидания | 9 |
Габариты |
|
Глубина |
410 |
Ширина |
425 |
Высота |
474 |
Вес |
21,3 |
Модули
Internal components (5 of 6)
INTERNAL COMPONENTS 1
PANEL
Tray 2 pickup assembly
FRAME L
Internal components (2 of 6)
Internal components (6 of 6)
Internal components (1 of 6)
Internal components (3 of 6)
MECH-032
COVERS and LABELS
Internal components (4 of 6)
DUPLEX
COVERS
Детали Internal components (2 of 6)
Деталь: | Solenoid, tray 1 (SL1) |
Парткод: | RK2-1490-000 |
Деталь: | Pick-up roller gear assembly |
Парткод: | RM1-3714-000 |
Деталь: | Roller stay assembly |
Парткод: | RM1-1485-000 |
Деталь: | SPRING, TORSION |
Парткод: | RU5-2386-000 |
Деталь: | Cover, formatter |
Парткод: | RC2-0627-000 |
Деталь: | PLATE, ANTI-MAGNETIC |
Парткод: | RC2-0628-000 |
Деталь: | Plate, inlet/outlet (non-network models) |
Парткод: | RC2-0638-000 |
Деталь: | Plate, inlet/outlet (network models) |
Парткод: | RC2-0629-000 |
Деталь: | HOLDER, FAN |
Парткод: | RC2-0592-000 |
Деталь: | Static wire, fan |
Парткод: | RC2-0593-000 |
Деталь: | Fan, right (FM1) |
Парткод: | RK2-1497-000 |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000 |
Цена: | 170 ₽ |
Деталь: | LEVER, SENSOR |
Парткод: | RC1-3939-000 |
Деталь: | SADDLE, WIRE |
Парткод: | WT2-5694-000 |
Деталь: | Holder, cable |
Парткод: | RC2-0588-000 |
Деталь: | GUIDE |
Парткод: | RC1-4083-000 |
Деталь: | SCREW, TAP, M3X6 |
Парткод: | XA9-1503-000 |
Цена: | 340 ₽ |
Деталь: | Multipurpose sensor PCA (PS3) |
Парткод: | RM1-4041-000 |
Деталь: | CLIP, CABLE |
Парткод: | WT2-5678-000 |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005 |
Деталь: | Screw, with washer, M3x6 |
Парткод: | XB2-7300-605 |
Деталь: | Engine controller assembly - 110127V |
Парткод: | RM1-3730-000 |
Деталь: | Engine controller assembly - 220240V |
Парткод: | RM1-3731-000 |
Деталь: | MAIN DRIVE ASSEMBLY |
Парткод: | RM1-3712-000 |
Деталь: | Fuser assembly (110-127V) |
Парткод: | RM1-3740-000 |
Деталь: | Fuser assembly (220-240V) |
Парткод: | RM1-3741-000 |
Деталь: | PAPER PICK-UP ASSEMBLY |
Парткод: | RM1-3762-000 |
Деталь: | Подшипник вала переноса заряда |
Парткод: | RC1-0922-000CN |
Цена: | 230 ₽ |
Деталь: | Вал переноса заряда |
Парткод: | RM1-1508-000CN |
Цена: | 500 ₽ |
Деталь: | Модуль памяти |
Парткод: | CB420A |
Деталь: | Модуль памяти |
Парткод: | CB421A |
Деталь: | Модуль памяти |
Парткод: | CB422A |
Цена: | 7 600 ₽ |
Деталь: | Модуль памяти |
Парткод: | CB423A |
Цена: | 7 000 ₽ |
Деталь: | Кнопка включения/выключения питания |
Парткод: | RC2-0631-000CN |
Деталь: | Главный мотор |
Парткод: | RK2-1488-000CN |
Цена: | 1 000 ₽ |
Деталь: | Мотор привода узла термозакрепления |
Парткод: | RK2-1489-000CN |
Цена: | 1 800 ₽ |
Деталь: | Соленоид узла захвта бумаги из лотка ручной подачи |
Парткод: | RK2-1490-000CN |
Цена: | 550 ₽ |
Деталь: | Соленоид узла захвта бумаги из кассеты |
Парткод: | RK2-1492-000CN |
Цена: | 190 ₽ |
Деталь: | Вентилятор |
Парткод: | RK2-1497-000CN |
Цена: | 750 ₽ |
Деталь: | Вентилятор |
Парткод: | RK2-1499-000CN |
Цена: | 1 800 ₽ |
Деталь: | Блок лазера |
Парткод: | RM1-1521-030CN |
Цена: | 3 900 ₽ |
Деталь: | Панель управления, в сборе |
Парткод: | RM1-3725-000CN |
Цена: | 1 700 ₽ |
Деталь: | Плата контроллера напряжения |
Парткод: | RM1-3731-060CN |
Цена: | 5 300 ₽ |
Деталь: | Плата высоковольтного питания |
Парткод: | RM1-3758-000CN |
Цена: | 8 200 ₽ |
Деталь: | Tray 2 pickup assembly |
Парткод: | RM1-3762-000 |
Деталь: | Tray 2 pickup roller assembly |
Парткод: | RM1-3763-000 |
Деталь: | Sensor-flag assembly |
Парткод: | RM1-3769-000 |
Деталь: | Cable, tray 2 sensor |
Парткод: | RM1-4060-000 |
Деталь: | Roller, tray 2 paper pickup |
Парткод: | RL1-1370-000 |
Деталь: | IC, photo interrupter (PS3) |
Парткод: | WG8-5624-000 |
Деталь: | Подшипник прижимного вала |
Парткод: | RC1-3609-020 |
Цена: | 120 ₽ |
Деталь: | Подшипник прижимного вала |
Парткод: | RC1-3610-000 |
Цена: | 120 ₽ |
Деталь: | Подшипник |
Парткод: | RC1-3665-000CN |
Цена: | 110 ₽ |
Деталь: | Стопор в узле термозакрепления |
Парткод: | RC2-0657-000CN |
Деталь: | Прижимной вал |
Парткод: | RC2-0671-000CN |
Цена: | 2 100 ₽ |
Деталь: | Термоплёнка |
Парткод: | RG5-5570-FILM |
Деталь: | Нагревательный элемент узла термозакрепления |
Парткод: | RM1-1531-HEAT |
Цена: | 700 ₽ |
Деталь: | Узел привода печки, в сборе |
Парткод: | RM1-3746-000CN |
Цена: | 1 800 ₽ |
Деталь: | Вал выхода бумаги из узла термозакрепления |
Парткод: | RM1-3749-000CN |
Цена: | 900 ₽ |
Деталь: | Fusing assembly |
Парткод: | RM1-3761-020CN |
Цена: | 13 500 ₽ |
Деталь: | Шестерня привода узла термозакрепления |
Парткод: | RU5-0956-000CN |
Цена: | 130 ₽ |
Деталь: | Шестерня привода печи |
Парткод: | RU5-0957-000CN |
Цена: | 120 ₽ |
Деталь: | Шестерня привода печи |
Парткод: | RU5-0958-000CN |
Цена: | 100 ₽ |
Деталь: | Шестерня привода печи |
Парткод: | RU5-0959-000CN |
Цена: | 110 ₽ |
Деталь: | Шестерня прижимного вала |
Парткод: | RU5-0964-000 |
Цена: | 100 ₽ |
Деталь: | LEVER, COUPLING |
Парткод: | RC1-4115-000 |
Деталь: | CAM |
Парткод: | RC1-4114-000 |
Деталь: | LEVER, DRIVE RELEASE |
Парткод: | RC1-4116-000 |
Деталь: | LINK, DRIVE RELEASE |
Парткод: | RC1-4117-000 |
Деталь: | Film, fuser drive side plate |
Парткод: | RC2-0649-000 |
Деталь: | DUCT, CARTRIDGE |
Парткод: | RC2-0590-000 |
Деталь: | Pendulum assembly |
Парткод: | RM1-3748-000 |
Деталь: | Drive release assembly |
Парткод: | RM1-1522-000 |
Деталь: | Guide, air |
Парткод: | RC2-0648-000 |
Деталь: | Stopper, fuser thrust |
Парткод: | RC2-0657-000 |
Деталь: | BUSHING, INNER |
Парткод: | RC2-0701-000 |
Деталь: | FERRITE CORE |
Парткод: | WE8-5516-000 |
Деталь: | Motor, DC, stepping (M2), fusing |
Парткод: | RK2-1489-000 |
Деталь: | Fuser drive assembly |
Парткод: | RM1-3746-000 |
Деталь: | GEAR, 201T |
Парткод: | RU5-0950-000 |
Деталь: | GEAR, 20T/20T |
Парткод: | RU5-0956-000 |
Деталь: | GEAR, 20T |
Парткод: | RU5-0957-000 |
Деталь: | Gear, 17T/17T |
Парткод: | RU5-0958-000 |
Деталь: | GEAR, 19T |
Парткод: | RU5-0959-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2401-000 |
Деталь: | GEAR, 12T |
Парткод: | RU5-0394-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2920-000 |
Деталь: | RING, E |
Парткод: | XD2-1100-402 |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000 |
Цена: | 170 ₽ |
Деталь: | COVER, MAIN MOTOR |
Парткод: | RC1-4108-000 |
Деталь: | COVER, GEAR |
Парткод: | RC2-0579-000 |
Деталь: | WASHER, PLAIN |
Парткод: | RC2-0652-000 |
Деталь: | Motor, DC (M1), main |
Парткод: | RK2-1488-000 |
Деталь: | GEAR, 16T |
Парткод: | RU5-0951-000 |
Деталь: | GEAR, 43T |
Парткод: | RU5-0955-000 |
Деталь: | GEAR, 31T |
Парткод: | RU5-0960-000 |
Деталь: | GEAR, 65T |
Парткод: | RU5-0962-000 |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005 |
Деталь: | PIN, DOWEL |
Парткод: | XD3-2120-122 |
Деталь: | RING, E |
Парткод: | XD2-1200-802 |
Деталь: | Switch, front |
Парткод: | RC2-0631-000 |
Деталь: | HOLDER, SWITCH |
Парткод: | RC2-0632-000 |
Деталь: | LINK, SWITCH |
Парткод: | RC2-0633-000 |
Деталь: | HOLDER, SWITCH LINK |
Парткод: | RC2-0634-000 |
Деталь: | CLIP, CABLE |
Парткод: | WT2-5678-000 |
Деталь: | Bottom plate roller assembly |
Парткод: | RM1-3727-000 |
Деталь: | HOLDER, INTERLOCK |
Парткод: | RC2-0595-000 |
Деталь: | Microswitch (SW501), door |
Парткод: | RK2-0534-000 |
Деталь: | Cushion, right lower |
Парткод: | RC2-0468-000 |
Деталь: | FOOT, RUBBER |
Парткод: | RA0-1003-000 |
Деталь: | Guide, cartridge upper, right |
Парткод: | RC2-0492-000 |
Деталь: | MOUNT, SOLENOID |
Парткод: | RC2-0498-000 |
Деталь: | GUIDE, CASSETTE, FRONT RIGHT |
Парткод: | RC2-0559-000 |
Деталь: | GUIDE, CASSETTE, REAR RIGHT |
Парткод: | RC2-0560-000 |
Деталь: | Guide, center plate, right |
Парткод: | RC2-0561-000 |
Деталь: | Holder, option connector |
Парткод: | RC2-0562-000 |
Деталь: | Guide, cartridge lower, right |
Парткод: | RC2-0700-000 |
Деталь: | Stopper, cartridge, right |
Парткод: | RC2-0702-000 |
Деталь: | CONNECTOR, DRAWER |
Парткод: | VS1-7257-007 |
Деталь: | CLIP, CABLE |
Парткод: | WT2-5056-000 |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000 |
Цена: | 170 ₽ |
Деталь: | BUSHING |
Парткод: | RC1-3665-000 |
Деталь: | ROLLER, FACE-DOWN |
Парткод: | RC1-3994-000 |
Деталь: | SPRING, TORSION |
Парткод: | RC2-0665-000 |
Деталь: | Plate, face-up shield |
Парткод: | RC2-0697-000 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7177-004 |
Деталь: | IC, photo interrupter (PS1) |
Парткод: | WG8-5624-000 |
Деталь: | Face-down roller assembly |
Парткод: | RM1-3749-000 |
Деталь: | Solenoid (SL2) |
Парткод: | RK2-1492-000 |
Деталь: | Cable, option interface |
Парткод: | RM1-4062-000 |
Деталь: | Delivery roller assembly |
Парткод: | RM1-1497-000 |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005 |
Деталь: | ARM, DOOR |
Парткод: | RC1-4055-000 |
Деталь: | Glide, door |
Парткод: | RC1-4056-000 |
Деталь: | DUCT, SCANNER |
Парткод: | RC1-4128-020 |
Деталь: | SADDLE, WIRE |
Парткод: | WT2-5694-000 |
Деталь: | SPRING, TENSION |
Парткод: | RU5-2407-000 |
Деталь: | Laser/Scanner assembly |
Парткод: | RM1-1521-030 |
Деталь: | LINK, LASER SHUTTER |
Парткод: | RC1-4125-000 |
Деталь: | STAY, TAG HOLDER |
Парткод: | RC1-4126-000 |
Деталь: | HOLDER, TAG |
Парткод: | RC1-4127-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2404-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2405-000 |
Деталь: | CLIP, CABLE |
Парткод: | WT2-5812-000 |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000 |
Цена: | 170 ₽ |
Деталь: | CABLE, SCANNER MOTOR |
Парткод: | RM1-4053-000 |
Деталь: | CABLE, MEMORY TAG |
Парткод: | RM1-4054-000 |
Деталь: | Holder, fan, left |
Парткод: | RC2-0622-000 |
Деталь: | Plate, fan shield, left |
Парткод: | RC2-0623-000 |
Деталь: | Fan, left |
Парткод: | RK2-1499-000 |
Деталь: | FOOT, RUBBER |
Парткод: | RA0-1003-000 |
Деталь: | HOLDER |
Парткод: | RC1-4009-000 |
Деталь: | LEVER, GROUNDING CONTACT |
Парткод: | RC1-4065-000 |
Деталь: | LEVER, GROUNDING CONTACT |
Парткод: | RC1-4066-020 |
Деталь: | SPRING, LEAF |
Парткод: | RC1-4067-000 |
Деталь: | PLATE, PROTECTIVE |
Парткод: | RC1-4136-000 |
Деталь: | CAM, CONTACT |
Парткод: | RC1-4137-020 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RC1-4140-000 |
Деталь: | GUIDE, CASSETTE, FRONT LEFT |
Парткод: | RC2-0565-000 |
Деталь: | GUIDE, CASSETTE, REAR LEFT |
Парткод: | RC2-0566-000 |
Деталь: | Guide, centerplate, left |
Парткод: | RC2-0567-000 |
Деталь: | Stopper, feed guide, left |
Парткод: | RC2-0585-000 |
Деталь: | Guide, cartridge upper, left |
Парткод: | RC2-0703-000 |
Деталь: | Guide, cartridge lower, left |
Парткод: | RC2-0704-000 |
Деталь: | LEVER, DRIVE RELEASE |
Парткод: | RC2-0705-000 |
Деталь: | Lever, cartridge clamp |
Парткод: | RC2-0706-000 |
Деталь: | Stopper, cartridge, left |
Парткод: | RC2-0707-000 |
Деталь: | SPRING, TENSION |
Парткод: | RU5-2403-000 |
Деталь: | SPRING, TORSION |
Парткод: | RU5-2410-020 |
Деталь: | CONNECTOR, SNAP TIGHT, BK |
Парткод: | VS1-7177-003 |
Деталь: | BUSHING, TRANSFER, RIGHT |
Парткод: | RC1-0922-000 |
Деталь: | Transfer roller assembly |
Парткод: | RM1-1508-000 |
Деталь: | Pad, separation, multipurpose tray |
Парткод: | RC1-0939-000 |
Деталь: | GUIDE, FEED |
Парткод: | RC1-3935-000 |
Деталь: | COVER, REGISTRATION |
Парткод: | RC1-3936-020 |
Деталь: | ARM, PAD |
Парткод: | RC1-3937-000 |
Деталь: | GEAR, 12T |
Парткод: | RU5-0400-000 |
Деталь: | ELIMINATOR, STATIC CHARGE |
Парткод: | RC1-4025-000 |
Деталь: | LEVER, SENSOR |
Парткод: | RC1-4027-000 |
Деталь: | SPRING, TORSION |
Парткод: | RC1-4028-000 |
Деталь: | SPRING, TORSION |
Парткод: | RC1-4059-000 |
Деталь: | LEVER |
Парткод: | RC1-4060-000 |
Деталь: | SPRING, TORSION |
Парткод: | RC1-4061-000 |
Деталь: | Roller, multipurpose pick-up |
Парткод: | RL1-0568-000 |
Деталь: | SCREW, D, M3X8 |
Парткод: | XA9-1671-000 |
Цена: | 170 ₽ |
Деталь: | SHEET, STATIC CHARGE |
Парткод: | RC1-4069-000 |
Деталь: | SHEET, STATIC CHARGE |
Парткод: | RC1-4070-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2408-000 |
Деталь: | REGISTRATION ASSEMBLY |
Парткод: | RM1-3715-000 |
Деталь: | Multipurpose paper pick-up roller assembly |
Парткод: | RM1-3716-000 |
Деталь: | Lower transfer guide assembly |
Парткод: | RM1-3757-000 |
Деталь: | STOPPER, GEAR |
Парткод: | RC1-4189-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RU5-2385-000 |
Деталь: | Arm, paper-width sensor |
Парткод: | RC2-0575-000 |
Деталь: | SPRING, TORSION |
Парткод: | RC2-0576-000 |
Деталь: | Cable, paper delivery sensor |
Парткод: | RM1-4057-000 |
Деталь: | GEAR, 17T |
Парткод: | RA0-1172-000 |
Деталь: | SPRING, COMPRESSION |
Парткод: | RC2-0483-000 |
Деталь: | GEAR, 14T |
Парткод: | RU5-0409-000 |
Деталь: | GEAR, 30T |
Парткод: | RU5-0366-000 |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005 |
Деталь: | Узел захвата бумаги из кассеты, в сборе |
Парткод: | 5851-4012 |
Цена: | 3 500 ₽ |
Деталь: | Дополнительный лоток для бумаги на 500 листов |
Парткод: | Q7817A |
Цена: | 8 100 ₽ |
Деталь: | Тормозная накладка на площадку отделения бумаги из лотка ручной подачи |
Парткод: | RC1-0939-000CN |
Цена: | 240 ₽ |
Деталь: | Держатель площадки отделения бумаги в лотке ручной подачи |
Парткод: | RC1-3937-000CN |
Деталь: | Флажок датчика наличия бумаги в лотке ручной подачи |
Парткод: | RC1-3939-000CN |
Цена: | 250 ₽ |
Деталь: | Ось привода ролика захвата бумаги из кассеты |
Парткод: | RC2-8532-000 |
Цена: | 270 ₽ |
Деталь: | Ролик захвата бумаги из лотка ручной подачи |
Парткод: | RL1-0569-000CN |
Цена: | 380 ₽ |
Деталь: | Pickup Roller |
Парткод: | RL1-1370-000CN |
Цена: | 270 ₽ |
Деталь: | Вспомогательные ролики в чёрном пластиковом корпусе, в сборе |
Парткод: | RM1-1485-000CN |
Цена: | 1 200 ₽ |
Деталь: | LABEL DRUM CAUTION J |
Парткод: | RM1-1490-000CN |
Цена: | 1 600 ₽ |
Деталь: | Привод узла выхода бумаги |
Парткод: | RM1-1522-020CN |
Цена: | 320 ₽ |
Деталь: | Шестерня привода оси узла захвата из кассеты на 500 листов |
Парткод: | RM1-3714-000CN |
Цена: | 700 ₽ |
Деталь: | Узел регистрации, в сборе |
Парткод: | RM1-3715-000CN |
Цена: | 2 600 ₽ |
Деталь: | Площадка отделения бумаги из кассеты |
Парткод: | RM1-3738-000CN |
Цена: | 390 ₽ |
Деталь: | Нижний узел подачи бумаги, в сборе |
Парткод: | RM1-3759-000CN |
Цена: | 1 300 ₽ |
Деталь: | Ролик захвата бумаги из кассеты, в сборе |
Парткод: | RM1-6323-000CN |
Цена: | 800 ₽ |
Деталь: | Шестерня узла захвата бумаги из лотка ручной подачи |
Парткод: | RU5-0366-000CN |
Цена: | 180 ₽ |
Деталь: | Пружина флажка датчика наличия бумаги в лотке ручной подачи |
Парткод: | RU5-2386-000CN |
Деталь: | Резиновая ножка |
Парткод: | RA0-1003-000CN |
Цена: | 320 ₽ |
Деталь: | Левая петля лотка ручной подачи бумаги |
Парткод: | RC1-4057-000CN |
Цена: | 360 ₽ |
Деталь: | Правая петля лотка ручной подачи бумаги |
Парткод: | RC1-4058-000CN |
Цена: | 320 ₽ |
Деталь: | Правая нижняя крышка |
Парткод: | RC2-0603-000CN |
Цена: | 900 ₽ |
Деталь: | Задняя крышка платы питания |
Парткод: | RC2-0612-000CN |
Цена: | 550 ₽ |
Деталь: | Верхняя крышка |
Парткод: | RM1-3720-020CN |
Цена: | 3 100 ₽ |
Деталь: | Крышка доступа к картриджу, в сборе |
Парткод: | RM1-3722-000CN |
Цена: | 4 100 ₽ |
Деталь: | Лоток ручной подачи бумаги, в сборе |
Парткод: | RM1-3723-000CN |
Цена: | 2 200 ₽ |
Деталь: | Задняя крышка, в сборе |
Парткод: | RM1-3724-000CN |
Цена: | 2 600 ₽ |
Деталь: | Кассета на 500 листов |
Парткод: | RM1-3732-000CN |
Цена: | 5 300 ₽ |
Деталь: | Кассета на 500 листов |
Парткод: | RM1-3796-000CN |
Цена: | 11 900 ₽ |
Деталь: | GUIDE, DUPLEX INLET |
Парткод: | RC1-4096-000 |
Деталь: | Lower paper feed assembly |
Парткод: | RM1-3759-000 |
Деталь: | High-voltage PCA |
Парткод: | RM1-3758-000 |
Деталь: | PAPER FEED GUIDE ASSEMBLY |
Парткод: | RM1-3760-000 |
Деталь: | PLATE, GROUNDING |
Парткод: | RC1-4085-000 |
Деталь: | Oblique roller assembly |
Парткод: | RM1-1506-000 |
Деталь: | Top sensor PCA (PS901) |
Парткод: | RM1-4040-000 |
Деталь: | Paper-width sensor PCA (PS903) |
Парткод: | RM1-4042-000 |
Деталь: | Screw, tapping, truss head, M4x10 |
Парткод: | XB4-7401-005 |
Деталь: | Screw, with washer, M3x6 |
Парткод: | XB2-7300-605 |
Деталь: | Шестерня |
Парткод: | RA0-1172-000CN |
Цена: | 850 ₽ |
Деталь: | Пластиковый ролик |
Парткод: | RC1-3994-000CN |
Цена: | 230 ₽ |
Деталь: | Узел снятия статического заряда |
Парткод: | RC1-4025-000CN |
Цена: | 340 ₽ |
Деталь: | Флажок датчика наличия бумаги |
Парткод: | RC1-4027-000CN |
Цена: | 250 ₽ |
Деталь: | Рычаг крышки доступа к картриджу |
Парткод: | RC1-4055-000CN |
Цена: | 320 ₽ |
Деталь: | Подшипник шестерни привода фотовала |
Парткод: | RC2-0701-000CN |
Цена: | 950 ₽ |
Деталь: | Стопор картриджа |
Парткод: | RC2-0707-000CN |
Цена: | 170 ₽ |
Деталь: | Position guide assembly |
Парткод: | RM1-1506-000CN |
Цена: | 1 000 ₽ |
Деталь: | Редуктор, в сборе |
Парткод: | RM1-3712-000CN |
Цена: | 1 700 ₽ |
Деталь: | PAPER FEED GUIDE ASSEMBLY |
Парткод: | RM1-3760-000CN |
Цена: | 800 ₽ |
Деталь: | Шестерня привода фотовала |
Парткод: | RU5-0950-000CN |
Цена: | 1 400 ₽ |
Деталь: | Шестерня |
Парткод: | RU5-0951-000CN |
Цена: | 1 100 ₽ |
Деталь: | Шестерня |
Парткод: | RU5-0955-000CN |
Цена: | 550 ₽ |
Деталь: | Шестерня |
Парткод: | RU5-0960-000CN |
Цена: | 900 ₽ |
Деталь: | Шестерня |
Парткод: | RU5-0962-000CN |
Цена: | 850 ₽ |
Деталь: | Торсионная пружина крышки доступа к картриджу |
Парткод: | RU5-2388-000CN |
Деталь: | Пружина сжатия шестерни привода фотовала |
Парткод: | RU5-2401-000CN |
Цена: | 320 ₽ |
Деталь: | Торсионная пружина |
Парткод: | RU5-2410-020CN |
Деталь: | Датчик наличия бумаги |
Парткод: | WG8-5849-000CN |
Цена: | 380 ₽ |
Деталь: | Зажим для кабеля |
Парткод: | WT2-5694-000CN |
Цена: | 320 ₽ |
Деталь: | COVER, DIMM |
Парткод: | RC2-0602-000 |
Деталь: | COVER, RIGHT LOWER |
Парткод: | RC2-0603-000 |
Деталь: | COVER, RIGHT FRONT |
Парткод: | RL1-1367-000 |
Деталь: | COVER, RIGHT UPPER |
Парткод: | RC2-0605-000 |
Деталь: | Cover, engine controller |
Парткод: | RC2-0612-000 |
Деталь: | TOP COVER ASSEMBLY |
Парткод: | RM1-3720-000 |
Деталь: | LEFT COVER ASSEMBLY |
Парткод: | RM1-3721-000 |
Деталь: | Multipurpose cover assembly |
Парткод: | RM1-3723-000 |
Деталь: | REAR COVER ASSEMBLY |
Парткод: | RM1-3724-000 |
Деталь: | Cartridge-door assembly |
Парткод: | RM1-3722-000 |
Деталь: | HINGE, LEFT |
Парткод: | RC1-4057-000 |
Деталь: | HINGE, RIGHT |
Парткод: | RC1-4058-000 |
Деталь: | SPRING, TENSION |
Парткод: | RU5-2388-000 |
Деталь: | Multipurpose tray assembly |
Парткод: | RM1-1490-000 |
Деталь: | Face down full flag, right |
Парткод: | RM1-3742-000 |
Деталь: | Face down full flag, left |
Парткод: | RM1-3743-000 |
Деталь: | Control-panel assembly |
Парткод: | RM1-3725-000 |
Коды ошибок
10.10.00
10.32.00
10.XX.XX
11.XX
13.00.02
13.01.00
13.05.00
13.31.00
13.65.0
13.67.0
13.XX.XX
20
21
22
40
41.3
41.5
41.X
49.XXXXX
50.1
50.6
51.XX
52.00
53.10.01
54.XX
55.XX.XX
57.03
57.04
59.50
62
64
68.X
79.XXXX
8X.XXXX
Описание
Error code: | 10.10.00 |
Display: | 10.10.00 SUPPLY MEMORY ERROR |
Description: | The product has experienced a print cartridge error. |
Remedy: | 1. Ensure that the cartridge is a genuine HP print cartridge. 2. Verify the connector at J74 on the DC controller PCA is securely connected. 3. Replace the print cartridge. |
Error code: | 10.32.00 |
Display: | 10.32.00 - Unauthorized Supply |
Description: | A supply has been installed that does not pass the authentication test for genuine HP supplies. |
Remedy: | If you believe you purchased a genuine HP supply, visit us at www.hp.com/go/ anticounterfeit. Any repair required as a result of using non-HP supplies or unauthorized supplies are not covered under warranty. HP cannot ensure the accuracy or the availability of certain features. To continue printing, touch OK. |
Error code: | 10.XX.XX |
Display: | 10.XX.YY SUPPLY MEMORY ERROR |
Description: | The device cannot read or write to the printcartridge memory tag, or the memory tag is missing. |
Remedy: | 1. Open the cartridge door. 2. Remove the print cartridge, and then reinstall it. 3. Close the cartridge door. 4. Turn the device off and then on. 5. Verify that a genuine HP print cartridge is installed in the device. 6. Install another print cartridge. 7. Verify that the memory tag PCA is installed in the device. 8. Verify that the memory tag connector is firmly seated in connector J510 on the ECU. You might have to remove the main cooling fan to see this connection. 9. If the error persists, contact HP Support. |
Error code: | 11.XX |
Display: | 11.XX INTERNAL CLOCK ERROR |
Description: | The real time clock has experienced an error. |
Remedy: | 1. Power cycle the product to see if the message clears. 2. If possible, print a configuration page to record product information, and then perform an NVRAM initialization routine. If the initialization routine is successful, you will need to re-enter several configuration parameters (such as the page count and the serial number). 3. If the error persists, replace the formatter PCA. |
Error code: | 13.00.02 |
Display: | 13.00.02 JAM IN TRAY 1 |
Description: | Paper is fed from tray 2 to the device by the tray 2 pick-up roller. When energized, solenoid SL2 releases a clutch, and then the pick-up roller rotates to pick up the paper and advance it into the paper path. |
Remedy: | 1. Verify that the type and quality of the media that you are using meet HP specifications. 2. Verify that the media is loaded correctly and that the guides are not too tight or too loose against the stack of media. 3. Verify that the tray 2 pickup roller and separation pad are installed correctly. 4. Verify that solenoid SL2 is being energized. If you cannot hear it during a print job, remove tray 2, override the paper presence sensor flag, start a print job, and then see if the pick-up roller is rotating. 5. Verify that solenoid SL2 is firmly seated in connector J504 on the ECU. |
Error code: | 13.01.00 |
Display: | 13.01.00 Jam in Tray 1 |
Description: | The Tray 1 pickup roller or solenoid might not be working correctly. |
Remedy: | 1. Load paper in Tray 1, and then use the paper path test to pull paper. Verify that the roller rotates. 2. If someone has performed maintenance on the product recently, verify that the Tray 1 pickup roller, feed roller, and separation roller have been installed correctly. 3. From the DIAGNOSTICS menu, run the multipurpose tray (Tray 1) solenoid component test to verify that the solenoid moves when energized. Listen for an audible “click” when the test is initiated. If the solenoid is not being energized, verify that the solenoid connector is attached to connector J71 on the DC controller PCA. 4. If the error persists, replace the Tray 1 solenoid (SL102). |
Error code: | 13.05.00 |
Display: | 13.05.00 JAM INSIDE TOP COVER |
Description: | Paper failed to reach the delivery sensor within a specified period of time when a print job was initiated. When troubleshooting paper jams, always observe where the leading edge of the paper stops in the jam. |
Remedy: | 1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that the fuser motor (M2) connector is firmly seated. The fuser motor wiring is hard-wired to the back of the ECU at connector J501. The motor connector is free-standing behind the ECU. To see if the fuser motor is functional, observe the output stacker rollers while turning on the device. If the rollers rotate, the motor is functional. If they do not rotate, verify the connection. |
Error code: | 13.31.00 |
Display: | 13.31.00 JAM INSIDE FRONT DOOR |
Description: | A jam has occurred inside the front door. |
Remedy: | 1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that the face-up tray sensor (PS1) is functioning properly. 3. Verify that connection J505 is firmly seated on the ECU. 4. Open and close the cartridge door to clear the error message |
Error code: | 13.65.0 |
Display: | 13.65.00 JAM INSIDE REAR DOOR |
Description: | A jam has occurred in the rear door area. |
Remedy: | 1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that the sensor connections on the rear of the fuser assembly are seated correctly. 3. Verify that connection J405 is firmly seated on the ECU. 4. Open and close the cartridge door to clear the error message |
Error code: | 13.67.0 |
Display: | 13.67.00 JAM INSIDE REAR DOOR |
Description: | A jam has occurred in the rear door area. |
Remedy: | 1. Verify that nothing is obstructing paper movement within the paper path. 2. Verify that high-voltage power supply flat ribbon cable connection J404 is firmly seated on the ECU. 3. Open and close the cartridge door to clear the error message |
Error code: | 13.XX.XX |
Display: | 13.XX.YY JAM INSIDE TOP COVER |
Description: | A jam has occurred in the registration assembly area. |
Remedy: | 1. Press "down" the to see step-by-step information. 2. Open the cartridge door, and then remove the print cartridge. 3. Remove all media found. 4. Lift the metal flap, and then remove any media remaining. 5. Reinstall the print cartridge, and then close the cartridge door. 6. If the message persists, verify that the flat ribbon cable at the bottom of the ECU is connected correctly. 7. To exit, press ? |
Error code: | 20 |
Description: | Vertical image or label drift |
Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
Error code: | 21 |
Description: | The bar code printed on a label does not scan. |
Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
Error code: | 22 |
Description: | Loss of printing registration on labels. Excessive vertical drift in top-of-form registration. |
Causes: | The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly. |
Remedy: | Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58. |
Error code: | 40 |
Display: | Scanner locked |
Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
Error code: | 41.3 |
Display: | 41.3 UNEXPECTED SIZE IN TRAY <X> |
Description: | You have configured the tray for a different size of paper than the print job requires. NOTE: This error can be caused by a multi feed problem. Open, and then close, the cartridge door to clear the error message. If the error persists, and the tray is correctly configured, try cleaning the Tray 1 pickup roller (or you might have to replace the roller). |
Remedy: | 1. Reload the tray with the correct paper size. 2. Make sure the paper size that is specified in the software program, the printer driver, and the control panel are all the same. 3. Press the OK button and scroll to the TRAY <X> SIZE = <Size> option. Reconfigure the size in a tray to match the size required for the print job. 4. If the error does not clear, turn the product off and then on. 5. If the message persists, contact an HPauthorized service or support provider. |
Error code: | 41.5 |
Display: | 41.5 UNEXPECTED TYPE IN TRAY X |
Description: | The device senses a different media type than what is configured in the tray. |
Remedy: | 1. Press "OK" to print from a different tray. 2. To print from the current tray, load the tray with the size and type indicated. Ensure that all trays are configured correctly before printing again |
Error code: | 41.X |
Display: | 41.X ERROR |
Description: | A temporary printing error occurred. |
Remedy: | 1. Press OK to see if the page will print. If necessary, turn the product off and then on. 2. Verify that the loaded paper meets HP specifications. If pages stick together, the paper detect sensors will detect a sheet of paper longer than what is expected in the product. 3. Verify that all paper size settings on the control panel, in the print driver settings, and in the software program match. 4. Verify that the correct size paper is loaded in the input tray. |
Error code: | 49.XXXXX |
Display: | 49.XXXXX ERROR |
Description: | A critical firmware error has occurred. |
Remedy: | 1. Turn the device off and then on. 2. Try to determine whether the error occurs intermittently, while printing, or when turning on the device. 3. If the error appears while printing, determine whether it occurs when printing from a specific computer, a specific application, or a specific file. If all other computers, applications, or files can print without the error, then the problem may be only within one print job or computer. Make sure the computer has the most current printer drivers, or use a generic printer driver. 4. Check for the latest firmware image version at the bottom of the page. If this firmware image is newer than the one installed on the device and the device can receive a firmware update, download the newer firmware upgrade. 5. Try printing a job from a different software program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain software program or print job, contact the software vendor for assistance. 6. If the message persists, contact HP Support |
Error code: | 50.1 |
Display: | 50.1 FUSER ERROR |
Description: | AC power is not being provided to the fuser assembly. AC voltage is necessary to generate heat in the fuser assembly. |
Remedy: | 1. Verify that the fuser power cable at the back of the device is connected and the ECU is fully seated. 2. If the message persists, replace the fuser assembly. |
Error code: | 50.6 |
Display: | 50.6 FUSER ERROR |
Description: | The main or sub thermistors are unable to provide temperature feedback to the ECU. The main and sub thermistors monitor the fuser assembly hot-roller temperature and provide feedback to regulate the fusing temperature. |
Remedy: | 1. Verify that the seven-wire connector is firmly seated in connector J405 on the ECU. You might have to remove the main cooling fan to see this connection. 2. Verify that the four-wire connector at the rear of the device is firmly seated in the fuser assembly. 3. Verify that the AC voltage is being provided to the fuser assembly. 4. If the message persists, replace the fuser assembly. |
Error code: | 51.XX |
Display: | 51.XX Error |
Description: | Laser Error. An error with the laser/scanner assembly has occurred in the product. • 51.00 = Laser error • 51.20 = Black laser scanner error • 51.30 = Laser error |
Remedy: | 1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the product. |
Error code: | 52.00 |
Display: | 52.00 ERROR |
Description: | A scanner motor error has occurred. Scanner motor rotation is verified at the initialization of a print job. |
Remedy: | 1. Verify that the scanner motor connector and the ribbon cable from the ECU are firmly seated on the laser/scanner assembly. 2. Verify that the scanner motor connector is firmly seated in connector J402 on the ECU. You might have to remove the main cooling fan to see this connection. 3. Verify that the ribbon cable installed in connector J403 on the ECU is fully seated You must remove the ECU in order to verify this connection. 4. If the message persists, replace the laser/scanner assembly. |
Error code: | 53.10.01 |
Display: | 53.10.01 ERROR UNSUPPORTED RAM |
Description: | The memory DIMM is not a supported DIMM. |
Remedy: | Install a supported DIMM |
Error code: | 54.XX |
Display: | 54.XX |
Description: | The product has experienced an error with one of the internal sensors. |
Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
Error code: | 55.XX.XX |
Display: | 55.XX.YY DC CONTROLLER ERROR |
Description: | The engine is not communicating with the formatter. |
Remedy: | 1. Turn the device off and then on. 2. Verify that the flat ribbon cable between the ECU and the formatter PCA is connected correctly. 3. If the message persists, replace the ECU. If the message still persists, replace the formatter. |
Error code: | 57.03 |
Display: | 57.03 ERROR |
Description: | Fan FN102 has experienced an error. |
Remedy: | 1. Inspect fan FN102 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J75 on the DC controller PCA is securely seated. 3. If the error persists, replace the fan. |
Error code: | 57.04 |
Display: | 57.04 ERROR |
Description: | Fan FN101 has experienced an error. |
Remedy: | 1. Inspect fan FN101 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J64 on the power supply PCA is securely seated. 3. If the error persists, replace the fan. |
Error code: | 59.50 |
Display: | 59.50 ERROR |
Description: | A main motor (M1) error has occurred. Motor operation is verified during device power-up. |
Remedy: | 1. Turn the device off and then on. 2. Verify that nothing is hindering the main motor. If necessary, remove all paper trays and the print cartridge, and then turn on the device and listen for motor operation. 3. Verify that the main motor is connected to connector J407 on the ECU. You might have to remove the main cooling fan to see this connection. 4. If the message persists, replace the motor. |
Error code: | 62 |
Display: | Nongenuine Toner Replace Toner |
Description: | The toner cartridge installed is not a genuine cartridge. |
Causes: | · Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board |
Remedy: | This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge. |
Error code: | 64 |
Display: | Toner Exhausted Replace Toner 1 |
Description: | Cover Open |
Causes: | The Printer Cover is open or Toner Cartridge not installed. |
Error code: | 68.X |
Display: | 68.X STORAGE ERROR SETTINGS CHANGED |
Description: | An error occurred in the product permanent storage and one or more product settings has been reset to its factory default. |
Remedy: | Press OK to resume printing. Print a configuration page and check the product settings to determine which values have changed. If the error does not clear, turn the product off and then on. If the message persists, contact an HP-authorized service or support provider. |
Error code: | 79.XXXX |
Display: | 79.XXXX ERROR |
Description: | The product detected a critical hardware error. |
Remedy: | • Press the stop button to clear the print job from the product memory. Turn the product off and then on. • Try printing a job from a different program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain program or print job, contact the software vendor for assistance. If the message persists with different programs and print jobs, try these steps. • Turn the product off. • Disconnect all cables to the product that connect it to the network or computer. • Remove all the memory DIMMs or thirdparty DIMMs from the product. Then reinstall the memory DIMM. • Remove the EIO device from the product. • Turn the product on. If the error no longer exists, follow these steps. • Install the DIMM and EIO device one at a time, making sure to turn the product off and then on as you install each device. • Replace the DIMM or EIO device if you determine that it causes the error. • Reconnect all cables that connect the product to the network or computer. |
Error code: | 8X.XXXX |
Display: | 8X.YYYY EMBEDDED JETDIRECT ERROR |
Description: | The HP Jetdirect embedded print server has encountered a critical error. |
Remedy: | 1. Turn the device off and then on. 2. Update the Jetdirect firmware. 3. If the problem persists, contact HP Support. |