HP LaserJet P4015x
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
225000
Скорость печати
A4
50
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Печать фотографий |
|
Размещение |
настольный |
Факс |
|
Телефон |
|
Макс. формат |
A4 |
Копир |
|
Сканер |
|
Область применения |
большой офис |
Тип устройства |
Принтер |
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Цветность печати |
|
Число страниц в месяц |
225 000 |
Принтер |
|
Печать без полей |
|
Пигментные чернила |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
| По Y | 1 200 |
| По X | 1 200 |
Скорость ч/б печати |
|
| A4 | 50 |
Время выхода первого отпечатка |
|
| Ч/б | 8,5 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Стандарт WIA |
|
Расходные материалы |
|
Печать на: |
|
| CD/DVD |
|
| Рулоне |
|
| Фотобумаге |
|
| Пленках |
|
| Этикетках |
|
| Матовой бумаге |
|
| Конвертах |
|
| Глянцевой бумаге |
|
| Карточках |
|
Плотность бумаги |
|
| Максимальная | 200 |
| Минимальная | 60 |
Факс |
|
Цветной |
|
Телефон |
|
АОН |
|
Спикерфон |
|
Стандарт DECT |
|
Автоответчик |
|
Caller ID |
|
Беспроводная трубка |
|
Проводная трубка |
|
Языки управления |
|
| PPDS |
|
| PostScript 2 |
|
| PCL 5c |
|
| PostScript 3 |
|
| PCL 6 |
|
| PCL 5e |
|
|
|
|
| PostScript |
|
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Максимальная | 3 600 |
| Стандартная | 1 100 |
Вывод бумаги |
|
| Стандартный | 600 |
| Максимальный | 600 |
Финишер |
|
Сортер |
|
Брошюровщик |
|
Степлер |
|
Сортировка со сдвигом |
|
Интерфейсы |
|
Wi-Fi |
|
Bluetooth |
|
LPT |
|
Инфракрасный порт |
|
RS-232 |
|
Устройство для чтения карт памяти |
|
FireWire (IEEE 1394) |
|
Ethernet (RJ-45) |
|
USB |
|
Количество свободных слотов расширения |
1 |
Количество слотов расширения |
1 |
Версия USB |
2,0 |
Память/Процессор |
|
Объем памяти |
128 |
Частота процессора |
540 |
Процессор |
Motorola ColdFire V5e |
Дополнительная информация |
|
Работа от аккумулятора |
|
Экран |
|
Диагональ дисплея |
2,28 |
Поддержка ОС |
|
| DOS |
|
| Linux |
|
| Windows |
|
| Mac OS |
|
Потребляемая мощность |
|
| В режиме ожидания | 12 |
| При работе | 840 |
Уровень шума |
|
| При работе | 58 |
| В режиме ожидания | 27 |
Габариты |
|
Высота |
546 |
Вес |
35,12 |
Глубина |
508 |
Ширина |
419 |
Модули
Multi-bin mailbox main body 2
INTERNAL COMPONENTS 1
POWER SUPPLY ASSEMBLY
Multi-bin mailbox covers
INTERNAL COMPONENTS 3
Optional 1,500-sheet feeder front door assembly
COVERS
Multi-bin mailbox PCA
Optional 1,500-sheet paper feeder covers
Optional 1,500-sheet feeder main body 1
500-sheet cassette
Fusing assembly
PAPER DELIVERY ASSEMBLY
Optional 500-sheet feeder cassette
Multi-bin mailbox main body 1
FRAME L
COVERS and LABELS
Multipurpose pickup assembly
MECH-032
PANEL
Optional 500-sheet paper feeder main body
Optional 1,500-sheet feeder main body 2
Optional 1,500-sheet feeder paper pickup assembly
PCAs
DUPLEX
Optional 1,500-sheet feeder PCA
INTERNAL COMPONENTS 2
Детали FRAME L
| Деталь: | DRIVE ASSEMBLY |
| Парткод: | RM1-5267-000CN |
| Деталь: | Sensor assembly |
| Парткод: | RM1-5096-000CN |
| Деталь: | Multi-bin mailbox PCA |
| Парткод: | RM1-6224-000CN |
| Деталь: | Cable, sensor PCA |
| Парткод: | NPN |
| Деталь: | Cable guide assembly |
| Парткод: | NPN |
| Деталь: | FRAME, BASE |
| Парткод: | NPN |
| Деталь: | Cover, envelope |
| Парткод: | RL1-1667-000CN |
| Деталь: | Transfer roller assembly |
| Парткод: | CB506-67903 |
| Цена: | 650 ₽ |
| Деталь: | Arm, release, A |
| Парткод: | RC2-2480-000CN |
| Цена: | 600 ₽ |
| Деталь: | Arm, release, B |
| Парткод: | RC2-2481-000CN |
| Деталь: | Motor, DC, 24 V, drum drive |
| Парткод: | RL1-1659-000CN |
| Деталь: | Size detect assembly |
| Парткод: | RM1-4525-000CN |
| Цена: | 750 ₽ |
| Деталь: | CABLE, DRUM MOTOR |
| Парткод: | RM1-5090-000CN |
| Деталь: | CABLE, SIZE SENSOR |
| Парткод: | RM1-5091-000CN |
| Деталь: | Grounding plate assembly |
| Парткод: | RM1-5461-000CN |
| Цена: | 320 ₽ |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | XA9-1671-000CN |
| Деталь: | SCREW, TAP, M3X6 |
| Парткод: | XA9-1503-000CN |
| Деталь: | Guide, connecting cable |
| Парткод: | RC1-0386-000CN |
| Деталь: | Screw, M4x5 |
| Парткод: | NPN |
| Деталь: | Power-supply assembly, 110-127 V |
| Парткод: | NPN |
| Деталь: | Power-supply assembly, 220-240 V |
| Парткод: | NPN |
| Деталь: | REGISTRATION ASSEMBLY |
| Парткод: | RM1-5460-000CN |
| Деталь: | PAPER FEED ROLLER ASSEMBLY |
| Парткод: | RM1-4527-000CN |
| Цена: | 1 700 ₽ |
| Деталь: | Multipurpose tray pickup assembly |
| Парткод: | RM1-4563-000CN |
| Деталь: | 500-sheet tray cassette |
| Парткод: | RM1-4559-000CN |
| Деталь: | Screw, tapping, pan head, M4X10 |
| Парткод: | XB4-7401-007CN |
| Деталь: | Cassette Tray Assembly |
| Парткод: | RM1-4559-020CN |
| Цена: | 6 100 ₽ |
| Деталь: | Узел осей подачи бумаги, в сборе |
| Парткод: | RM1-4562-040CN |
| Цена: | 2 500 ₽ |
| Деталь: | Узел захвата бумаги из лотка 1, в сборе |
| Парткод: | RM1-4563-080CN |
| Цена: | 5 100 ₽ |
| Деталь: | Узел регистрации, в сборе |
| Парткод: | RM1-5460-010CN |
| Цена: | 2 100 ₽ |
| Деталь: | PAPER FEED ASSEMBLY |
| Парткод: | RM1-4548-000CN |
| Цена: | 2 700 ₽ |
| Деталь: | Electrical components assembly (110-127 V) |
| Парткод: | RM1-4549-000CN |
| Деталь: | Electrical components assembly (220-240 V) |
| Парткод: | RM1-4578-000CN |
| Деталь: | Cable, inlet (110-127 V) |
| Парткод: | RM1-5078-000CN |
| Деталь: | Cable, inlet (220-240 V) |
| Парткод: | RM1-5079-000CN |
| Деталь: | CONNECTOR, DRAWER, 6P |
| Парткод: | VS1-7514-006CN |
| Цена: | 330 ₽ |
| Деталь: | Screw, flat head RS, M3x6 |
| Парткод: | XA9-1464-000CN |
| Деталь: | Screw, machine, pan head, M3x6 |
| Парткод: | XB1-1300-605CN |
| Деталь: | Screw, with washer, M4x6 |
| Парткод: | XB2-7400-606CN |
| Деталь: | COVER, FRONT |
| Парткод: | NPN |
| Деталь: | COVER, TOP |
| Парткод: | NPN |
| Деталь: | LEFT COVER ASSEMBLY |
| Парткод: | NPN |
| Деталь: | RIGHT COVER ASSEMBLY |
| Парткод: | NPN |
| Деталь: | Rear door assembly |
| Парткод: | NPN |
| Деталь: | Cable, stacker drawer |
| Парткод: | NPN |
| Деталь: | Joint, left |
| Парткод: | NPN |
| Деталь: | Joint, right |
| Парткод: | NPN |
| Деталь: | Lever, in flapper link |
| Парткод: | NPN |
| Деталь: | Connector, 8P |
| Парткод: | VS1-7500-008CN |
| Деталь: | IN solenoid assembly |
| Парткод: | NPN |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | NPN |
| Деталь: | FRAME, BASE |
| Парткод: | NPN |
| Деталь: | SCREW, P, M3X8 |
| Парткод: | NPN |
| Деталь: | Right guide assembly (P4015/P4515) |
| Парткод: | RM1-4558-000CN |
| Деталь: | Right guide assembly (P4014) |
| Парткод: | RM1-5451-000CN |
| Деталь: | CABLE, PANEL |
| Парткод: | RM1-5082-000CN |
| Деталь: | THERMISTOR UNIT |
| Парткод: | RK2-0359-000CN |
| Деталь: | FAN |
| Парткод: | RK2-1988-000CN |
| Цена: | 850 ₽ |
| Деталь: | FAN |
| Парткод: | RK2-1989-000CN |
| Цена: | 1 000 ₽ |
| Деталь: | FAN |
| Парткод: | RK2-1991-000CN |
| Деталь: | FAN |
| Парткод: | RK2-1992-000CN |
| Цена: | 850 ₽ |
| Деталь: | BUSHING, PAPER DELIVERY |
| Парткод: | RC1-0136-000CN |
| Цена: | 900 ₽ |
| Деталь: | PAPER DELIVERY DRIVE ASSEMBLY |
| Парткод: | RM1-4526-000CN |
| Цена: | 1 000 ₽ |
| Деталь: | DC controller PCA |
| Парткод: | RM1-4582-000CN |
| Деталь: | Fuser motor assembly |
| Парткод: | RM1-5051-000CN |
| Деталь: | CABLE, DOOR SWITCH |
| Парткод: | RM1-5080-000CN |
| Деталь: | Cable, fuser motor |
| Парткод: | RM1-5088-000CN |
| Цена: | 260 ₽ |
| Деталь: | LIFTER DRIVE ASSEMBLY |
| Парткод: | RM1-4585-000CN |
| Цена: | 1 100 ₽ |
| Деталь: | Cable, full sensor |
| Парткод: | RM1-5081-000CN |
| Деталь: | CABLE, ENVELOPE FEEDER |
| Парткод: | RM1-5085-000CN |
| Цена: | 550 ₽ |
| Деталь: | IC, PHOTO INTERRUPTER |
| Парткод: | WG8-5624-000CN |
| Деталь: | SPRING, TENSION |
| Парткод: | RC1-0198-000CN |
| Деталь: | Support, lifter drive assembly |
| Парткод: | NPN |
| Деталь: | PAPER DELIVERY ASSEMBLY |
| Парткод: | RM1-4529-000CN |
| Цена: | 1 900 ₽ |
| Деталь: | Fuser assembly (110-127 V) |
| Парткод: | CB506-67901 |
| Деталь: | Fuser assembly (220-240 V) |
| Парткод: | CB506-67902 |
| Цена: | 18 300 ₽ |
| Деталь: | Screw, with washer, M3x6 |
| Парткод: | XB2-7300-607CN |
| Деталь: | Optional 1,500-sheet feeder front door assembly |
| Парткод: | RM1-5255-000CN |
| Деталь: | PAPER FEED ROLLER ASSEMBLY |
| Парткод: | RM1-0037-020CN |
| Цена: | 70 ₽ |
| Деталь: | Limiter, cassette torque |
| Парткод: | RC2-5262-000CN |
| Деталь: | COVER, OPTION |
| Парткод: | RC2-2459-000CN |
| Деталь: | Cover, formatter (P4015/P4515) |
| Парткод: | RC2-2468-000CN |
| Цена: | 1 300 ₽ |
| Деталь: | Cover, formatter (P4014) |
| Парткод: | RC2-5757-000CN |
| Деталь: | Cover, right front (P4015/P4515) |
| Парткод: | RC2-2475-000CN |
| Деталь: | Cover, right front (P4014) |
| Парткод: | RC2-5758-000CN |
| Деталь: | Cover, envelope connector (P4015/P4515) |
| Парткод: | RC2-2476-000CN |
| Деталь: | Cover, envelope connector (P4014) |
| Парткод: | RC2-5759-000CN |
| Деталь: | Cover, duplexing outer (P4015/P4515) |
| Парткод: | RC2-2510-000CN |
| Деталь: | Cover, duplexing outer (P4014) |
| Парткод: | RC2-5760-000CN |
| Деталь: | Cover, legal (P4015/P4515) |
| Парткод: | RC2-5239-000CN |
| Цена: | 950 ₽ |
| Деталь: | Cover, legal (P4014) |
| Парткод: | RC2-5761-000CN |
| Деталь: | Face-up tray assembly (P4015/P4515) |
| Парткод: | RM1-4531-000CN |
| Цена: | 2 800 ₽ |
| Деталь: | Face-up tray assembly (P4014) |
| Парткод: | RM1-5448-000CN |
| Цена: | 2 300 ₽ |
| Деталь: | FRONT COVER ASSEMBLY |
| Парткод: | RM1-4534-000CN |
| Цена: | 1 500 ₽ |
| Деталь: | Right cover assembly (P4015/P4515) |
| Парткод: | RM1-4550-000CN |
| Деталь: | Right cover assembly (P4014) |
| Парткод: | RM1-5449-000CN |
| Деталь: | Left cover assembly (P4015/P4515) |
| Парткод: | RM1-4551-000CN |
| Деталь: | Left cover assembly (P4014) |
| Парткод: | RM1-5450-000CN |
| Деталь: | Top cover assembly (P4015/P4515) |
| Парткод: | RM1-4552-000CN |
| Деталь: | Top cover assembly (P4014) |
| Парткод: | RM1-5250-000CN |
| Деталь: | Control panel assembly (P4015/P4515) |
| Парткод: | RM1-5059-000CN |
| Цена: | 8 600 ₽ |
| Деталь: | Control panel assembly (P4014) |
| Парткод: | RM1-5060-000CN |
| Цена: | 11 300 ₽ |
| Деталь: | Cover, right rear (P4015/P4515) |
| Парткод: | RC2-2478-000CN |
| Деталь: | Cover, right rear (P4014) |
| Парткод: | RC2-5768-000CN |
| Деталь: | Pin, option |
| Парткод: | RC1-0306-000CN |
| Деталь: | Screw, tapping, pan head, M4X10 |
| Парткод: | NPN |
| Деталь: | SCREW, D, M3X8 |
| Парткод: | NPN |
| Деталь: | Multi-bin mailbox PCA |
| Парткод: | RM1-6224-000CN |
| Деталь: | COVER, REAR |
| Парткод: | RC2-2640-000CN |
| Деталь: | COVER, RIGHT |
| Парткод: | RC2-2641-000CN |
| Деталь: | COVER, LEFT |
| Парткод: | RC2-2642-000CN |
| Деталь: | COVER, LEFT LOWER |
| Парткод: | RC2-2643-000CN |
| Деталь: | Cover, Lock |
| Парткод: | RC2-2584-000CN |
| Деталь: | Screw, with washer, M3X8 |
| Парткод: | XA9-1420-000CN |
| Деталь: | Screw, tap, pan head, M4x10 |
| Парткод: | XB4-7401-007CN |
| Деталь: | FRONT DOOR ASSEMBLY |
| Парткод: | RM1-5255-000CN |
| Деталь: | MOTOR, STEPPING |
| Парткод: | RH7-1603-020CN |
| Цена: | 1 300 ₽ |
| Деталь: | CABLE, INTERFACE |
| Парткод: | RM1-5126-000CN |
| Деталь: | Cable, door sensor |
| Парткод: | RM1-5128-000CN |
| Деталь: | Paper pickup drive assembly |
| Парткод: | RM1-5262-000CN |
| Деталь: | 1,500-sheet feeder driver PCA |
| Парткод: | RM1-6214-000CN |
| Деталь: | Oil damper assembly |
| Парткод: | RM1-0289-030CN |
| Деталь: | LIFTER DRIVE ASSEMBLY |
| Парткод: | RM1-1136-000CN |
| Деталь: | Numbering assembly |
| Парткод: | RM1-5265-000CN |
| Деталь: | CONNECTOR, DRAWER, 6P |
| Парткод: | VS1-7500-006CN |
| Деталь: | 500-sheet cassette |
| Парткод: | RM1-4559-000CN |
| Деталь: | Limiter, cassette torque |
| Парткод: | RC2-5262-000CN |
| Деталь: | PAPER FEED ROLLER ASSEMBLY |
| Парткод: | RM1-0037-020CN |
| Цена: | 370 ₽ |
| Деталь: | Fusing assembly (110-127 V) |
| Парткод: | CB506-67901 |
| Деталь: | Fusing assembly (220-240 V) |
| Парткод: | CB506-67902 |
| Цена: | 18 300 ₽ |
| Деталь: | PAPER DELIVERY ASSEMBLY |
| Парткод: | RM1-4529-000CN |
| Цена: | 1 900 ₽ |
| Деталь: | SPRING, TENSION |
| Парткод: | RC1-0133-000CN |
| Цена: | 750 ₽ |
| Деталь: | SPRING, GROUNDING |
| Парткод: | RU6-2105-000CN |
| Цена: | 320 ₽ |
| Деталь: | Optional 500-sheet feeder cassette |
| Парткод: | RM1-4559-000CN |
| Деталь: | Product roller kit (contains 2 feed rollers, 1 pickup roller) |
| Парткод: | CB506-67904 |
| Цена: | 6 500 ₽ |
| Деталь: | Limiter, cassette torque |
| Парткод: | RC2-5262-000CN |
| Деталь: | PAPER FEED ROLLER ASSEMBLY |
| Парткод: | RM1-0037-020CN |
| Цена: | 70 ₽ |
| Деталь: | Paper sensing flag assembly |
| Парткод: | NPN |
| Деталь: | Top bin flapper assembly |
| Парткод: | NPN |
| Деталь: | Bin flapper assembly |
| Парткод: | NPN |
| Деталь: | Center bin flapper assembly |
| Парткод: | NPN |
| Деталь: | Bin solenoid assembly |
| Парткод: | RM1-5266-000CN |
| Деталь: | Cable, bin solenoid |
| Парткод: | NPN |
| Деталь: | Bin assembly |
| Парткод: | NPN |
| Деталь: | SOLENOID |
| Парткод: | NPN |
| Деталь: | FRAME, BASE |
| Парткод: | NPN |
| Деталь: | (CET5808) Прижимной вал |
| Парткод: | LPR-P4015 |
| Деталь: | Подшипник прижимного вала |
| Парткод: | RC1-3361-000 |
| Деталь: | Подшипник прижимного вала |
| Парткод: | RC1-3362-000 |
| Деталь: | (CET5805) Шестерня прижимного вала *32 зуба |
| Парткод: | RC2-2399-000 |
| Деталь: | Привод узла термозакрепления, в сборе |
| Парткод: | RC2-2432-000 |
| Цена: | 1 200 ₽ |
| Деталь: | Термоплёнка |
| Парткод: | RM1-4579-FILM |
| Цена: | 4 400 ₽ |
| Деталь: | Нагревательный элемент узла термозакрепления |
| Парткод: | RM1-4579-HEAT |
| Цена: | 1 900 ₽ |
| Деталь: | (CET6885) Первый термистор узла термозакрепления |
| Парткод: | RM1-8396-TH1 |
| Деталь: | (CET6886) Второй термистор узла термозакрепления |
| Парткод: | RM1-8396-TH2 |
| Деталь: | Мобильный стенд |
| Парткод: | CB525A |
| Деталь: | Правая крышка |
| Парткод: | RM1-4550-010CN |
| Цена: | 5 700 ₽ |
| Деталь: | Верхняя крышка, в сборе |
| Парткод: | RM1-4552-040CN |
| Цена: | 5 300 ₽ |
| Деталь: | Multipurpose pickup assembly |
| Парткод: | RM1-4563-000CN |
| Деталь: | Multipurpose tray kit (contains 1 pickup roller, 1 feed roller, 1 separation roller) |
| Парткод: | CB506-67905 |
| Деталь: | Roller, pickup |
| Парткод: | RL1-1641-000CN |
| Деталь: | ROLLER, FEED |
| Парткод: | RL1-1663-000CN |
| Цена: | 550 ₽ |
| Деталь: | ROLLER, SEPARATION |
| Парткод: | RL1-1654-000CN |
| Деталь: | Дополнительный податчик бумаги на 1500 листов |
| Парткод: | CE398A |
| Деталь: | Устройство подачи конвертов на 75 листов |
| Парткод: | CE399A |
| Деталь: | Дополнительный податчик документов |
| Парткод: | CE998A |
| Цена: | 9 600 ₽ |
| Деталь: | Модуль двухсторонней печати |
| Парткод: | CF062A |
| Цена: | 14 600 ₽ |
| Деталь: | Ограничительный ролик в кассете на 500 листов |
| Парткод: | RC2-5771-000CN |
| Цена: | 1 000 ₽ |
| Деталь: | Плата форматтера |
| Парткод: | CB438-69002 |
| Цена: | 19 000 ₽ |
| Деталь: | Мотор главного привода |
| Парткод: | RL1-1657-020CN |
| Цена: | 4 000 ₽ |
| Деталь: | Мотор привода фотовала |
| Парткод: | RL1-1659-010CN |
| Цена: | 4 200 ₽ |
| Деталь: | Плата питания |
| Парткод: | RM1-4578-190CN |
| Цена: | 16 100 ₽ |
| Деталь: | Плата контроллера напряжения |
| Парткод: | RM1-4582-090CN |
| Цена: | 4 600 ₽ |
| Деталь: | Мотор привода печки |
| Парткод: | RM1-5051-020CN |
| Цена: | 1 600 ₽ |
| Деталь: | Блок лазера |
| Парткод: | RM1-7419-000CN |
| Цена: | 31 600 ₽ |
| Деталь: | Product roller kit (contains 2 feed rollers, 1 pickup roller) |
| Парткод: | CB506-67904 |
| Цена: | 6 500 ₽ |
| Деталь: | SOLENOID |
| Парткод: | NPN |
| Деталь: | Size detect assembly |
| Парткод: | NPN |
| Деталь: | PAPER FEED ROLLER ASSEMBLY |
| Парткод: | RM1-0037-020CN |
| Цена: | 370 ₽ |
| Деталь: | Front top plate assembly |
| Парткод: | NPN |
| Деталь: | Cable, interface, upper |
| Парткод: | NPN |
| Деталь: | Pickup drive side plate |
| Парткод: | NPN |
| Деталь: | CABLE, SIZE SENSOR |
| Парткод: | NPN |
| Деталь: | 500-page feeder driver PCA |
| Парткод: | NPN |
| Деталь: | CONNECTOR, DRAWER, 6P |
| Парткод: | NPN |
| Деталь: | Lifter driver assembly |
| Парткод: | NPN |
| Деталь: | Paper pickup roller assembly |
| Парткод: | RM1-0036-020CN |
| Цена: | 370 ₽ |
| Деталь: | CABLE, SIZE SENSOR |
| Парткод: | RM1-5127-000CN |
| Деталь: | Remnant indication assembly |
| Парткод: | RM1-5259-000CN |
| Деталь: | Paper size detect assembly |
| Парткод: | RM1-5261-000CN |
| Деталь: | Product roller kit (contains 2 feed rollers, 1 pickup roller) |
| Парткод: | CB506-67904 |
| Цена: | 6 500 ₽ |
| Деталь: | PAPER FEED ROLLER ASSEMBLY |
| Парткод: | RM1-0037-020CN |
| Цена: | 370 ₽ |
| Деталь: | Paper pickup roller assembly |
| Парткод: | RM1-0036-020CN |
| Цена: | 370 ₽ |
| Деталь: | Paper detect sensor assembly |
| Парткод: | RM1-5264-000CN |
| Деталь: | Flag, paper detect |
| Парткод: | RC2-2524-000CN |
| Деталь: | Cable, feed, sensor |
| Парткод: | RM1-5129-000CN |
| Деталь: | DC controller PCA |
| Парткод: | RM1-4582-000CN |
| Деталь: | Electrical components assembly (110-127 V) |
| Парткод: | RM1-4549-000CN |
| Деталь: | Electrical components assembly (220-240 V) |
| Парткод: | RM1-4578-000CN |
| Деталь: | Formatter assembly (base models) |
| Парткод: | CB437-69001 (exchange) |
| Деталь: | Formatter assembly (network models) |
| Парткод: | CB438-69001 (exchange) |
| Деталь: | Formatter assembly (base models) |
| Парткод: | CB437-67901 (new) |
| Деталь: | Formatter assembly (network models) |
| Парткод: | CB438-67901 (new) |
| Деталь: | Датчик температуры |
| Парткод: | RM1-8438-000CN |
| Цена: | 330 ₽ |
| Деталь: | Шестерня привода фотовала |
| Парткод: | RU6-0190-000 |
| Цена: | 650 ₽ |
| Деталь: | Датчик наличия бумаги |
| Парткод: | WG8-5849-000CN |
| Цена: | 380 ₽ |
| Деталь: | 1,500-sheet feeder driver PCA |
| Парткод: | RM1-6214-000CN |
| Деталь: | LASER SCANNER ASSEMBLY |
| Парткод: | RM1-5465-000CN |
| Деталь: | Motor, DC, 24 V, main drive |
| Парткод: | RL1-1657-000CN |
| Деталь: | SHAFT, RETARD DRIVE |
| Парткод: | RL1-1658-000CN |
| Цена: | 900 ₽ |
| Деталь: | SOLENOID |
| Парткод: | RK2-0270-000CN |
| Цена: | 1 900 ₽ |
| Деталь: | Paper pickup roller assembly |
| Парткод: | RM1-0036-020CN |
| Цена: | 370 ₽ |
| Деталь: | PAPER FEED ROLLER ASSEMBLY |
| Парткод: | RM1-0037-020CN |
| Цена: | 370 ₽ |
| Деталь: | Paper pickup drive assembly |
| Парткод: | RM1-4532-000CN |
| Цена: | 5 500 ₽ |
| Деталь: | Tag holder assembly |
| Парткод: | RM1-4539-000CN |
| Цена: | 500 ₽ |
| Деталь: | Paper feed shaft Z assembly |
| Парткод: | RM1-4562-000CN |
| Деталь: | Feeder sensor cable assembly |
| Парткод: | NPN |
| Деталь: | RING, E |
| Парткод: | XD9-0232-000CN |
| Цена: | 150 ₽ |
| Деталь: | CABLE, FEED MOTOR |
| Парткод: | RM1-5089-000CN |
| Деталь: | Right front guide assembly |
| Парткод: | RM1-4576-000CN |
| Деталь: | CABLE, LASER |
| Парткод: | RM1-5087-000CN |
| Деталь: | Rod, switch |
| Парткод: | RC2-2667-000CN |
| Деталь: | BUSHING |
| Парткод: | RC1-0206-000CN |
| Деталь: | Bushing, feed shaft |
| Парткод: | RC1-0264-000CN |
| Деталь: | GEAR, 18T |
| Парткод: | RU5-0045-020CN |
| Деталь: | GEAR, 23T |
| Парткод: | RU6-0159-000CN |
| Деталь: | BUSHING |
| Парткод: | RC2-5783-000CN |
| Деталь: | SPRING, TENSION |
| Парткод: | RU6-2115-000CN |
| Деталь: | SPRING, COMPRESSION |
| Парткод: | RC1-0213-000CN |
| Цена: | 150 ₽ |
| Деталь: | SCREW, TAP, BINDING HEAD, M3X8 |
| Парткод: | XB4-7300-809CN |
| Деталь: | Стопорное кольцо |
| Парткод: | XD9-0233-000CN |
| Цена: | 230 ₽ |
Коды ошибок
10.10.00
10.94.YY
10.XX.YY
11.XX
13.01.00
13.03.00
13.20.00
13.JJ.NT
21
22
40
41.X
49.XXXX
50.X
51.XY
53.XY.ZZ
54.XX
55.XX.YY
56.XX
57.01
57.03
57.04
57.05
57.07
58.XX
59.XY
60.XX
62
65.XY.ZZ
66.XY.ZZ
68.X
69.X
79.XXXX
8X.YYYY
Описание
| Error code: | 10.10.00 |
| Display: | 10.10.00 SUPPLY MEMORY ERROR |
| Description: | The product has experienced a print cartridge error. |
| Remedy: | 1. Ensure that the cartridge is a genuine HP print cartridge. 2. Verify the connector at J74 on the DC controller PCA is securely connected. 3. Replace the print cartridge. |
| Error code: | 10.94.YY |
| Display: | 10.94.YY REMOVE SHIPPING LOCKS FROM CARTRIDGE <AREA> |
| Description: | At least one shipping lock is installed. |
| Remedy: | 1. Open the top cover. 2. Pull the tape and then remove the print cartridge. 3. Remove the orange tabs from the print cartridge. 4. Remove the plastic insert and foam from the print cartridge area. 5. Reinsert the print cartridge and then close the top cover. |
| Error code: | 10.XX.YY |
| Display: | 10.XX.YY SUPPLY MEMORY ERROR |
| Description: | An error has occurred in one or more of the product`s supplies. Values of XX and YY are listed below: XX00 = memory is defective XX01 = memory is missing YY00 = cartridge |
| Remedy: | • Turn the product off and then on to clear the message. • Replace the print cartridge. |
| Error code: | 11.XX |
| Display: | 11.XX INTERNAL CLOCK ERROR |
| Description: | The real time clock has experienced an error. |
| Remedy: | 1. Power cycle the product to see if the message clears. 2. If possible, print a configuration page to record product information, and then perform an NVRAM initialization routine. If the initialization routine is successful, you will need to re-enter several configuration parameters (such as the page count and the serial number). 3. If the error persists, replace the formatter PCA. |
| Error code: | 13.01.00 |
| Display: | 13.01.00 Jam in Tray 1 |
| Description: | The Tray 1 pickup roller or solenoid might not be working correctly. |
| Remedy: | 1. Load paper in Tray 1, and then use the paper path test to pull paper. Verify that the roller rotates. 2. If someone has performed maintenance on the product recently, verify that the Tray 1 pickup roller, feed roller, and separation roller have been installed correctly. 3. From the DIAGNOSTICS menu, run the multipurpose tray (Tray 1) solenoid component test to verify that the solenoid moves when energized. Listen for an audible “click” when the test is initiated. If the solenoid is not being energized, verify that the solenoid connector is attached to connector J71 on the DC controller PCA. 4. If the error persists, replace the Tray 1 solenoid (SL102). |
| Error code: | 13.03.00 |
| Display: | 13.03.00 JAM IN TRAY X |
| Description: | A jam has occurred in the specified location. This jam occurs when the product cannot move paper from the specified tray into the paper path. |
| Remedy: | 1. Inspect the paper path and remove any obstructions. 2. Verify that the tray is not loaded incorrectly or overfilled. 3. For Trays 3, 4, 5, or 6, verify that the trays are stacked correctly. 4. Verify that the media meets HP media specifications. 5. If maintenance has recently be performed, verify that the pickup, feed, and separation rollers have been reinstalled correctly. 6. Verify that connector J77 on the DC controller PCA is firmly seated. 7. From the DIAGNOSTICS menu, run the feed roller clutch (CL101) component test. 8. If the tray pickup motor rotates, yet the drive gears directly below the motor (on the Tray 2 pickup assembly) do not rotate, the clutch is not functioning properly. Replace the feed roller assembly. |
| Error code: | 13.20.00 |
| Display: | 13.20.00 JAM INSIDE <LOCATION> |
| Description: | Paper has not moved past a certain paper sensor. <LOCATION> can be one of the following locations. • TRAY 2 • TOP COVER • REAR DOOR • DUPLEXER |
| Remedy: | • TRAY 2 Remove the tray, and then check the paper path for obstructions. Perform a manual sensor test and observe the prefeed sensor (PS102) status (B). Toggle the sensor flag to determine if the status changes. • TOP COVER Remove the print cartridge, and then check the paper path for obstructions. Verify that the top-of-page sensor (PS103) and the media width sensors (PS106 and PS108) are unblocked. Perform a manual sensor test and observe the status of these sensors. Toggle the sensor flags to determine if their status changes. • REAR DOOR Open or remove the rear face-up bin, and then check the paper path on each side of the fusing assembly for obstructions. Remove the fuser, if necessary. Perform a manual sensor test and observe the fuser delivery sensor (PS700) status (C). Toggle the sensor flag to determine if the status changes. • DUPLEXER Remove the duplexer, and then check the paper path for obstructions. If the message persists, replace the duplexer. |
| Error code: | 13.JJ.NT |
| Display: | 13.JJ.NT PAPER JAM OPEN INPUT TRAYS |
| Description: | A jam has occurred in an input tray. |
| Remedy: | 1. Open the top cover. 2. Remove the print cartridge and any paper. 3. Reinstall the print cartridge and close the top cover. 4. Close all trays. |
| Error code: | 21 |
| Description: | The bar code printed on a label does not scan. |
| Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
| Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
| Error code: | 22 |
| Description: | Loss of printing registration on labels. Excessive vertical drift in top-of-form registration. |
| Causes: | The platen roller is dirty. Media guides are positioned improperly. The media type is set incorrectly. The media is loaded incorrectly. |
| Remedy: | Clean the platen roller according to the instructions in Clean the Printhead and Platen Roller on page 131. Ensure that the media guides are properly positioned. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. Load media correctly. See Load Media on page 58. |
| Error code: | 40 |
| Display: | Scanner locked |
| Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
| Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
| Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
| Error code: | 41.X |
| Display: | 41.X ERROR |
| Description: | A temporary printing error occurred. |
| Remedy: | 1. Press OK to see if the page will print. If necessary, turn the product off and then on. 2. Verify that the loaded paper meets HP specifications. If pages stick together, the paper detect sensors will detect a sheet of paper longer than what is expected in the product. 3. Verify that all paper size settings on the control panel, in the print driver settings, and in the software program match. 4. Verify that the correct size paper is loaded in the input tray. |
| Error code: | 49.XXXX |
| Display: | 49.XXXX ERROR |
| Description: | A critical firmware error has occurred that caused the processor on the formatter to cease operation. This error can be caused by invalid print commands, corrupt data, or invalid operations. In some cases, electrical “noise” in the cable can corrupt data during transmission to the product. Other causes can be poor-quality cables, poor connections, or home-grown programs. On rare occasions, the formatter is at fault. |
| Remedy: | 1. Turn off the product, and then turn it on. 2. Press Stop to clear the print job from the product memory. 3. Turn off the product, and then turn it on. 4. Print a document from a different software program. If the job prints, return to the first program and try to print a different file. If the message appears only with a certain software program or print job, contact the software program vendor for assistance. 5. If the message persists with different software programs and print jobs, disconnect all of the cables to the product that connect it to the network or computer. 6. Turn off the product. 7. Remove all EIO devices from the product. 8. Turn on the product. 9. If the error no longer exists, replace each EIO device one at a time, making sure to turn the product off and on again as you install each device. 10. Replace an EIO device if you determine that it causes the error. |
| Error code: | 50.X |
| Display: | 50.X Fuser Error |
| Description: | The product has an internal hardware error. |
| Remedy: | 1. Press the power button to turn the product off.2. If a surge protector is in use, remove it. Connect the power cord directly into a wall outlet.3. Wait at least 25 minutes, turn the product on, and then wait for the product to initialize.4. If the error persists, reconnect J101 and J552 on the engine controller PCA.5. If the error persists, check the power source. Make sure that the power source meets the minimum system requirements (40Hz to 70Hz).6. If the error persists, replace the fuser.7. If the error persists, replace the engine controller PCA. |
| Error code: | 51.XY |
| Display: | 51.XY ERROR |
| Description: | A laser/scanner error has occurred. |
| Remedy: | 1. From the DIAGNOSTICS menu, run the laser/scanner motor component test. Verify that you can hear motor rotate. 2. If you cannot hear the motor rotate, verify that the connections to connector J86 and connector J93 on the DC controller PCA are firmly seated. 3. Verify that the wiring harness at the laser/scanner assembly is securely attached. 4. If the error persists, replace the laser/ scanner assembly. |
| Error code: | 53.XY.ZZ |
| Display: | 53.XY.ZZ CHECK RAM DIMM SLOT <X> |
| Description: | There is a problem with the product memory. The DIMM that caused the error will not be used. Values of X and Y are as follows: • X = DIMM type, 0 = ROM, 1 = RAM • Y = DIMM location, 0 = Internal memory (ROM or RAM), 1 = DIMM slot 1 |
| Remedy: | Press OK to continue if you are prompted. If the message continues, you might need to replace the specified DIMM. Turn the product off, and then replace the DIMM that caused the error. |
| Error code: | 54.XX |
| Display: | 54.XX |
| Description: | The product has experienced an error with one of the internal sensors. |
| Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
| Error code: | 55.XX.YY |
| Display: | 55.XX.YY DC CONTROLLER ERROR |
| Description: | A temporary printing error occurred. |
| Remedy: | 1. Turn the product off and then on. 2. Remove any third-party memory or USB device, and then turn the product off and then on. 3. Remove and then reinstall the formatter. 4. If the error persists, remove the formatter and perform an engine test. If the engine test page fails to print, replace the DC controller. If the engine test page prints, replace the formatter. |
| Error code: | 56.XX |
| Display: | 56.XX ERROR |
| Description: | A temporary printing error occurred as a result of an incorrect input or output request. |
| Remedy: | • Turn the product off and then on. • If the message persists, contact an HPauthorized service or support provider. |
| Error code: | 57.01 |
| Display: | 57.01 |
| Description: | Fan 1 error. The product has experienced an error with its internal fan. |
| Causes: | Fan 1 error |
| Remedy: | 1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the internal cooling fan (HP Part #: RK2-8068-000CN).4. If the error persists, replace the product. |
| Error code: | 57.03 |
| Display: | 57.03 ERROR |
| Description: | Fan FN102 has experienced an error. |
| Remedy: | 1. Inspect fan FN102 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J75 on the DC controller PCA is securely seated. 3. If the error persists, replace the fan. |
| Error code: | 57.04 |
| Display: | 57.04 ERROR |
| Description: | Fan FN101 has experienced an error. |
| Remedy: | 1. Inspect fan FN101 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J64 on the power supply PCA is securely seated. 3. If the error persists, replace the fan. |
| Error code: | 57.05 |
| Display: | 57.05 ERROR |
| Description: | The duplexer fan has experienced an error. |
| Remedy: | 1. Inspect the fan to determine if its rotational movement is being obstructed. 2. If the error persists, replace the duplexer. |
| Error code: | 57.07 |
| Display: | 57.07 ERROR |
| Description: | Fan FN301 has experienced an error. |
| Remedy: | 1. Inspect fan FN301 to determine if its rotational movement is being obstructed. 2. Verify that the fan connection at connector J65 on the power supply PCA is securely seated. 3. If the error persists, replace the fan. |
| Error code: | 58.XX |
| Display: | 58.XX ERROR |
| Description: | The product has experienced an error with the low voltage power supply. • 58.04 = Low voltage power supply malfunction |
| Remedy: | 1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on. 3. Check the voltage label on the back of the product. If the product is rated 220V and is plugged into a 110V outlet, this error might occur. In most cases, no damage is caused to the product. If a power transformer is used to convert 220V power to 110V, verify that the transformer power rating is sufficient to operate the product.4. If the error persists, replace the Low Voltage Power Supply PCB Assembly: L.V.POWER SUPPLY PCB ASS`Y (110–127V) RM2–0840–000CN L.V.POWER SUPPLY PCB ASS`Y (220–240V) CHINA ONLY RM2-0842–000CN L.V.POWER SUPPLY PCB ASS`Y (220–240V) EXCEPT CHINA RM2-0841–000CN5. If the error persists, replace the product. |
| Error code: | 59.XY |
| Display: | 59.XY ERROR |
| Description: | A temporary printing error occurred. |
| Remedy: | 1. Inspect the DC controller PCA and verify that the following connectors are firmly seated: • Drum motor (M102) to connector J87 • Feed motor (M101) to connector J91 • Fusing motor (M299) to connector J89 NOTE: There is a cable between the drum motor and the DC controller. Both ends of the cable need to be firmly seated. 2. If the error persists, from the DIAGNOSTICS menu, run the component tests for each motor to verify that they are operating. If any of the motors is not operating, replace the motor. |
| Error code: | 60.XX |
| Display: | 60.XX ERROR |
| Description: | An error has occurred while the product was attempting to lift the tray designated by XX |
| Remedy: | 1. Open the tray, and then remove the paper. 2. Open the guides and look for any torn pieces of paper or foreign objects inside the tray. 3. Replace the paper, and then close the tray. 4. Turn the product off and then on. 5. Remove most of the paper from the tray except for a few sheets, and insert the tray into the product. Listen for the sound of the lift motor lifting the paper stack. Also, observe if the paper level indicator moves at the front of the tray. 6. Tray 2 only: If the paper stack in the tray is not being lifted, verify that the lift motor connector is firmly seated in connector J73 on the DC controller PCA. 7. If the error persists, replace the lift motor. |
| Error code: | 62 |
| Display: | Nongenuine Toner Replace Toner |
| Description: | The toner cartridge installed is not a genuine cartridge. |
| Causes: | · Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board |
| Remedy: | This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge. |
| Error code: | 65.XY.ZZ |
| Display: | 65.XY.ZZ OUTPUT DEVICE DISCONNECTED |
| Description: | An output device was removed while the product was turned on. |
| Remedy: | To continue printing, you must do one of the following: • Reconnect the output device. • Turn the product off and then on. If the message persists, replace the output device. |
| Error code: | 66.XY.ZZ |
| Display: | 66.XY.ZZ SERVICE ERROR |
| Description: | The external paper-handling controller has detected a problem. |
| Remedy: | Check the cables, and then turn the product off and then on. |
| Error code: | 68.X |
| Display: | 68.X STORAGE ERROR SETTINGS CHANGED |
| Description: | An error occurred in the product permanent storage and one or more product settings has been reset to its factory default. |
| Remedy: | Press OK to resume printing. Print a configuration page and check the product settings to determine which values have changed. If the error does not clear, turn the product off and then on. If the message persists, contact an HP-authorized service or support provider. |
| Error code: | 69.X |
| Display: | 69.X ERROR |
| Description: | A printing error occurred. |
| Remedy: | • Turn the product off and then on. • If the message persists, contact an HPauthorized service or support provider. |
| Error code: | 79.XXXX |
| Display: | 79.XXXX ERROR |
| Description: | The product detected a critical hardware error. |
| Remedy: | • Press the stop button to clear the print job from the product memory. Turn the product off and then on. • Try printing a job from a different program. If the job prints, go back to the first program and try printing a different file. If the message appears only with a certain program or print job, contact the software vendor for assistance. If the message persists with different programs and print jobs, try these steps. • Turn the product off. • Disconnect all cables to the product that connect it to the network or computer. • Remove all the memory DIMMs or thirdparty DIMMs from the product. Then reinstall the memory DIMM. • Remove the EIO device from the product. • Turn the product on. If the error no longer exists, follow these steps. • Install the DIMM and EIO device one at a time, making sure to turn the product off and then on as you install each device. • Replace the DIMM or EIO device if you determine that it causes the error. • Reconnect all cables that connect the product to the network or computer. |
| Error code: | 8X.YYYY |
| Display: | 8X.YYYY EMBEDDED JETDIRECT ERROR |
| Description: | The embedded HP Jetdirect print server has encountered a critical error. |
| Remedy: | • Turn the product off and then on. • If the message persists, contact an HPauthorized service or support provider. |
