HP LaserJet Pro MFP M226
Рейтинг
Модули
Scanner and document feeder (ADF) main assemblies
Scanner assembly internal components (2 of 2)
Scanner assembly internal components (1 of 2)
Internal assemblies (3 of 3)
External panels and covers
Internal assemblies (1 of 3)
Document feeder internal components
Internal assemblies (2 of 3)
Детали External panels and covers
Деталь: | Assembly, Auto Document Feeder |
Парткод: | CF484-60116 |
Цена: | 11 400 ₽ |
Деталь: | 1200PPI scanner assembly |
Парткод: | CF484-60110 |
Цена: | 10 000 ₽ |
Деталь: | Assembly, scanner/ADF (complete) |
Парткод: | CF484-60103 |
Деталь: | Assembly, scan drive system1 |
Парткод: | CF484-60113 |
Деталь: | Assembly, scan module/motor cable1 |
Парткод: | CF484-60105 |
Деталь: | Scanner base1 |
Парткод: | CF484-40001 |
Деталь: | Assembly, ADF cable1 |
Парткод: | CF484-60104 |
Деталь: | Assembly, scan bezel1 |
Парткод: | CF484-60111 |
Деталь: | Assembly, scanner base1 |
Парткод: | CF484-60112 |
Деталь: | LASER SCANNER ASSEMBLY |
Парткод: | RM2-0426-000 |
Деталь: | Motor PCB assembly |
Парткод: | RM2-7634-000 |
Деталь: | CABLE, FLAT |
Парткод: | RK2-6691-000 |
Деталь: | MOTOR, DC24V |
Парткод: | RM2-0418-000 |
Деталь: | DUPLEXING PCB ASSEMBLY |
Парткод: | RM2-7608-000 |
Деталь: | SOLENOID |
Парткод: | RK2-0420-000 |
Деталь: | FAN |
Парткод: | RK2-6694-000 |
Деталь: | Link, cartridge door, CH IN |
Парткод: | RC2-9514-000 |
Деталь: | COVER, LEFT |
Парткод: | RL1-3803-000 |
Деталь: | COVER, TOP |
Парткод: | RC3-4790-000 |
Деталь: | Cartridge door assembly |
Парткод: | RM1-9890-000 |
Деталь: | COVER, RIGHT |
Парткод: | RC3-4792-000 |
Деталь: | Paper delivery tray assembly |
Парткод: | RM1-9649-000 |
Деталь: | COVER, DUST |
Парткод: | RC3-3902-000 |
Деталь: | Paper pick-up tray assembly |
Парткод: | RM1-9677-000 |
Деталь: | COVER, FRONT |
Парткод: | RL1-3802-000 |
Деталь: | Duplexing door assembly |
Парткод: | RM1-9654-000 |
Деталь: | Fixing assembly, 110-127V |
Парткод: | RM1-9891-000 |
Деталь: | Fixing assembly, 220-240V |
Парткод: | RM1-9892-000 |
Деталь: | Engine control PCB assembly, 110-127V |
Парткод: | RM2-7632-000 |
Деталь: | Engine control PCB assembly, 220-240V |
Парткод: | RM2-7633-000 |
Деталь: | Engine control PCB assembly, 220-240V, CH IN |
Парткод: | RM2-8080-000 |
Деталь: | LINK, CARTRIDGE DOOR |
Парткод: | RC2-9527-000 |
Деталь: | Delivery sensor PCB assembly |
Парткод: | RM2-7629-000 |
Деталь: | Fixing film assembly, 110-127V |
Парткод: | RM1-9656-000 |
Деталь: | Fixing film assembly, 220-240V |
Парткод: | RM1-9657-000 |
Деталь: | LINK, PRESSURE RELEASE |
Парткод: | RC2-9531-000 |
Деталь: | Assembly, ADF core |
Парткод: | CF484-60118 |
Деталь: | Assembly, ADF base |
Парткод: | CF484-60120 |
Деталь: | Assembly, ADF cover and adjuster |
Парткод: | CF484-60127 |
Деталь: | Assembly, pick arm |
Парткод: | CF144-60142 |
Деталь: | Assembly, separator pad |
Парткод: | Q7400-60005 |
Деталь: | PAPER PICK-UP ASSEMBLY |
Парткод: | RM2-6524-000 |
Деталь: | ROLLER, TRANSFER |
Парткод: | RM1-4023-000 |
Деталь: | Roller, pickup |
Парткод: | RL1-3642-000 |
Деталь: | Paper pick-up sensor PCB assemby |
Парткод: | RM2-7635-000 |
Деталь: | SEPARATION PAD ASSEMBLY |
Парткод: | RM1-4227-000 |
Деталь: | Duplexing frame assembly |
Парткод: | RM1-9655-000 |
Коды ошибок
13.0000
20.0000
21.0000
41.2000
41.3000
49
50.0000
50.1000
50.2000
50.3000
50.4000
50.7000
50.X
51.0000
51.2000
51.XX
52.0000
54.0100
54.0600
54.1100
54.1200
54.1599
54.1800
54.2100
54.2500
54.XX
55.3000
55.4000
55.X
57
57.0000
57.0600
59.X
79
Описание
Error code: | 13.0000 |
Display: | 13.0000 |
Description: | Paper jam |
Error code: | 20.0000 |
Display: | 20.0000 |
Description: | Memory out |
Error code: | 21.0000 |
Display: | 21.0000 |
Description: | Page misfeed or mispick |
Error code: | 41.2000 |
Display: | 41.2000 |
Description: | Beam detect malfunction |
Error code: | 41.3000 |
Display: | 41.3000 |
Description: | Unexpected size |
Error code: | 49 |
Display: | Tray 1 Paper Empty |
Description: | There is no paper in the tray 1. |
Causes: | Pressure roller thermistor, pressure roller lamp connector, MCU |
Remedy: | Load paper in the tray 1. |
Error code: | 50.0000 |
Display: | 50.0000 |
Description: | Fuser error |
Error code: | 50.1000 |
Display: | 50.1000 |
Description: | Low fuser temperature error |
Error code: | 50.2000 |
Display: | 50.2000 |
Description: | Slow fuser error |
Error code: | 50.3000 |
Display: | 50.3000 |
Description: | High fuser temperature error |
Error code: | 50.4000 |
Display: | 50.4000 |
Description: | Fuser drive circuit error |
Error code: | 50.7000 |
Display: | 50.7000 |
Description: | Fuser open error Low sub-thermistor fuser error High sub-thermistor fuser error |
Error code: | 50.X |
Display: | 50.X Fuser Error |
Description: | The product has an internal hardware error. |
Remedy: | 1. Press the power button to turn the product off.2. If a surge protector is in use, remove it. Connect the power cord directly into a wall outlet.3. Wait at least 25 minutes, turn the product on, and then wait for the product to initialize.4. If the error persists, reconnect J101 and J552 on the engine controller PCA.5. If the error persists, check the power source. Make sure that the power source meets the minimum system requirements (40Hz to 70Hz).6. If the error persists, replace the fuser.7. If the error persists, replace the engine controller PCA. |
Error code: | 51.0000 |
Display: | 51.0000 |
Description: | Beam detect or laser error |
Error code: | 51.2000 |
Display: | 51.2000 |
Description: | Black scanner laser error (inline devices only) |
Error code: | 51.XX |
Display: | 51.XX Error |
Description: | Laser Error. An error with the laser/scanner assembly has occurred in the product. • 51.00 = Laser error • 51.20 = Black laser scanner error • 51.30 = Laser error |
Remedy: | 1. Reset the printer:a. Turn off the power by using the power switch, and then wait at least 30 seconds.b. Turn on the power and wait for the product to initialize.2. If you are using a surge protector:a. Power off the printer.b. Remove the surge protector.c. Plug the product directly into the wall socket and turn the product power on.3. If the error persists, replace the product. |
Error code: | 52.0000 |
Display: | 52.0000 |
Description: | Engine laser scanner error |
Error code: | 54.0100 |
Display: | 54.0100 |
Description: | Environmental sensor error |
Remedy: | Verify that the DC controller connectors are firmly connected. If the error persists, replace the temperature/humidity sensor. If the error persists, replace the DC controller. |
Error code: | 54.0600 |
Display: | 54.0600 |
Description: | Density sensor error |
Remedy: | Verify that the cables between the DC controller is firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the DC controller. |
Error code: | 54.1100 |
Display: | 54.1100 |
Description: | Black density out of range |
Remedy: | Verify that the cables between the DC controller is firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the DC controller. |
Error code: | 54.1200 |
Display: | 54.1200 |
Description: | Black density measurement abnormality |
Remedy: | Verify that the cables between the DC controller is firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the DC controller. |
Error code: | 54.1599 |
Display: | 54.1599 |
Description: | Black CPR pattern cannot be read |
Remedy: | 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, verify that the cables between the color misregistration sensor and the DC controller are firmly connected. If the error persists, replace the color misregistration sensor. If the error persists, replace the toner cartridge tray. If the error persists, replace the DC controller. |
Error code: | 54.1800 |
Display: | 54.1800 |
Description: | Black toner level sensor error |
Remedy: | 1. Turn off the power by using the power switch, and then wait at least 30 seconds. 2. Turn on the power and wait for the product to initialize. If the error persists, replace the DC controller. |
Error code: | 54.2100 |
Display: | 54.2100 |
Description: | Beam detect (BD) error |
Remedy: | If the error persists, replace the DC controller. If the error persists, replace the product. |
Error code: | 54.2500 |
Display: | 54.2500 |
Description: | Top-of-page sensor error |
Remedy: | Verify that the DC controller connectors are firmly connected. If the error persists, replace the DC controller. |
Error code: | 54.XX |
Display: | 54.XX |
Description: | The product has experienced an error with one of the internal sensors. |
Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
Error code: | 55.3000 |
Display: | 55.3000 |
Description: | Engine-formatter communication error |
Error code: | 55.4000 |
Display: | 55.4000 |
Description: | Engine communication timeout error |
Error code: | 55.X |
Display: | 55.X Error |
Description: | The product has experienced an internal error. |
Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
Error code: | 57 |
Display: | Toner Low |
Description: | The toner cartridge is almost empty. |
Remedy: | Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations. |
Error code: | 57.0000 |
Display: | 57.0000 |
Description: | Fan motor error |
Error code: | 57.0600 |
Display: | 57.0600 |
Description: | Fan motor error |
Error code: | 59.X |
Display: | 59.X Error |
Description: | The product has experienced a problem with one of the motors. |
Remedy: | Turn the product power off, wait at least 30 seconds, and then turn the product power on and wait for it to initialize. If you are using a surge protector, remove it. Plug the product directly into the wall socket. Turn the product power on. |
Error code: | 79 |
Display: | 79 |
Description: | No detection of the internal temperature thermistor. |
Causes: | Harness connection failure of internal temperature thermistor. Internal temperature thermistor failure. Main PCB failure |
Remedy: | 1 Harness connection failure of internal temperature thermistor Check the harness connection of the internal temperature thermistor, and reconnect it. 2 Internal temperature thermistor failure Replace the internal temperature thermistor. 3 Main PCB failure Replace the main PCB ASSY. |