Konica-Minolta magicolor 2590MF

Рейтинг

Снят с производства

Тип устройства

МФУ

Технология печати

лазерная

Макс. формат

Число страниц в месяц

35000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Факс
Копир
Сканер
Размещение	настольный
Цветность печати	цветная
Технология печати	лазерная
Тип	лазерный/светодиодный
Область применения	малый офис
Число страниц в месяц	35 000
Макс. формат	A4
Телефон
Печать фотографий
Тип устройства	МФУ
Принтер
Время разогрева	75
Печать без полей
Двусторонняя печать
Пигментные чернила
Прямая печать
Макс, разрешение для ч/б печати
По X	600
По Y	600
По X	2 400
Скорость ч/б печати
A4	20
Время выхода первого отпечатка
Ч/б	13
Цветн,	22
Копир
Макс, количество копий за цикл	99
Шаг масштабирования	0,01
Время выхода первой копии	13
Значение масштаба
Минимальное	0,5
Максимальное	2
Макс, разрешение (ч/б)
По Y	600
По X	600
Скорость ч/б копирования
A4	5
Сканер
Тип сканера	планшетный/протяжный
Емкость устройства автоподачи оригиналов	50
Тип датчика сканера	ПЗС (CCD)
Стандарт TWAIN
Стандарт WIA
Отправка изображения по e-mail
Макс. формат оригинала	A4
Устройство автоподачи оригиналов	одностороннее
Макс, размер сканирования
По Y	355
По X	215
Разрешение сканера
По Y (улучшенное)	600
По Х	600
По Х (улучшенное)	600
Скорость сканирования
Ч/б	9,4
Цветн,	23
Расходные материалы
Количество картриджей	4
Ресурс фотобарабана	45 000
Ресурс ч/б картриджа/тонера	4 500
Ресурс цветного картриджа/тонера	1 500
Печать на:
CD/DVD
Фотобумаге
Рулоне
Матовой бумаге
Этикетках
Конвертах
Пленках
Карточках
Глянцевой бумаге
Плотность бумаги
Максимальная	163
Минимальная	60
Факс
PC Fax
Макс, скорость передачи данных	33,6 Кбит/с
Телефон
Беспроводная трубка
Caller ID
АОН
Спикерфон
Стандарт DECT
Автоответчик
Проводная трубка
Языки управления
PCL 6
PCL 5e
PDF
PostScript
PostScript 2
PostScript 3
PCL 5c
PPDS
Лотки
Подача бумаги
Максимальная	700
Стандартная	200
Вывод бумаги
Стандартный	100
Финишер
Электронная сортировка
Степлер
Сортер
Брошюровщик
Сортировка со сдвигом
Интерфейсы
Ethernet (RJ-45)
USB
Версия USB	2,0
Bluetooth
Устройство для чтения карт памяти
Инфракрасный порт
LPT
FireWire (IEEE 1394)
Wi-Fi
RS-232
Память/Процессор
Объем памяти	128
Дополнительная информация
Экран
Поддержка ОС
Linux
DOS
Mac OS
Windows
Потребляемая мощность
При работе	1 100
В режиме ожидания	250
Уровень шума
При работе	57
В режиме ожидания	39
Габариты
Ширина	475
Высота	531
Вес	28
Глубина	528

Модули

DRIVE SECTION 2

RIGHT FRAME

MAIN FRAME

PAPER TAKE-UP SECTION

DRIVE SECTION 3

RIGHT FRAME 2

LEFT FRAME 3

PAPER TAKE-UP SECTION 3

ADF 2

DRIVE SECTION 4

TOP COVER

DRIVE SECTION

ADF 3

EXTERNAL PARTS

IR SECTION 2

PAPER TAKE-UP SECTION 2

ADF

TOP COVER 2

IR SECTION

LEFT FRAME 2

ELECTRICAL COMPONENTS

LEFT FRAME

VERTICAL TRANSPORT SECTION

TRANSFER SECTION

MAIN FRAME 2

TRANSFER ROLLER SECTION

PH Section

FUSING UNIT

Детали LEFT FRAME 3

Деталь:	RIGHT COVER
Парткод:	4139 1415 04

Деталь:	PRESSURE SPRING
Парткод:	4556 2233 02

Деталь:	LEVER
Парткод:	4139 2222 01

Деталь:	TENSION SPRING
Парткод:	4139 2229 01

Деталь:	PIN
Парткод:	4131 2536 02

Деталь:	PRESSURE SPRING
Парткод:	4139 2228 01

Деталь:	HOLDER
Парткод:	4139 2227 01

Деталь:	FRICTION SHEET
Парткод:	4139 2226 01

Деталь:	PRESSURE SPRING
Парткод:	4139 2230 01

Деталь:	HOLDER
Парткод:	4139 2232 01

Деталь:	RAIL
Парткод:	4139 2221 01

Деталь:	PIN
Парткод:	4139 2225 01

Деталь:	WIRE HARNESS ASSY
Парткод:	4556 6855 03

Деталь:	LOUDSPEAKER
Парткод:	9373 2200 11

Деталь:	PAWL
Парткод:	4139 2244 01

Деталь:	BUSHING
Парткод:	4139 2208 01

Деталь:	BRACKET
Парткод:	4139 2363 01

Деталь:	REINFORCE PLATE
Парткод:	4139 2215 03

Коды ошибок

04H

05H

08H

0BH

0CH

0FH

101H

102H

10H

12H

14H

15H

16H

17H

18H

19H

1AH

1BH

21H

23H

24H

29H

2AH

2BH

2CH

31H

F01H

Деталь:	LABEL CONSUMABLES REODER
Парткод:	4139 7334 01

Деталь:	HUMIDITY CONVERTION EL.
Парткод:	9372 5400 11

Деталь:	REGULATING PLATE ASSY
Парткод:	4139 R706 00

Деталь:	Label magicolor 2590MF
Парткод:	4556 9442 00

Деталь:	LABEL COPY PROHIBITION
Парткод:	4556 9405 00

Деталь:	Push Button Switch ASSY
Парткод:	4139 R735 00

Error code:	04H
Description:	Printer control board malfunction • Communications with the M/C expansion IO G/A (IC on the printer control board) are not properly carried out.
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • CR Motor failure • Carriage overload error (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB.

Error code:	05H
Description:	Flash ROM malfunction • Engine firmware upgrading has failed.
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • Paper jam • Cable disconnection
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 Change PRCB.

Error code:	08H
Description:	Main motor malfunction • The motor lock signal remains HIGH for a predetermined consecutive period of time while the main motor remains energized. • The motor lock signal remains LOW for a predetermined consecutive period of time while the main motor remains deenergized.
Causes:	• CR Encoder failure (contaminated/detached scale, Encoder Board failure) • Tooth skip of the CR Timing Belt • Improper tension of the CR Timing Belt • Paper jam
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1.

Error code:	0BH
Description:	Ventilation fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the ventilation fan motor remains energized.
Causes:	• ADF Encoder failure (contaminated/detached scale, Encoder Board failure) • ADF Motor failure • ADF drive overload (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the FM2 connector for proper connection and correct as necessary. 2 Check FM2 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 FM2 operation check. PRCB PJ10PRCB-1 (REM) PECB PJ10PRCB-3 (LOCK) C-4. 5 Change PRCB. 6 Change DCPU1.

Деталь:	Stepping motor
Парткод:	A00V M100 00

Деталь:	SOLENOID
Парткод:	9321 2400 11

Деталь:	SCREW
Парткод:	4106 2063 01

Деталь:	CAM ASSY
Парткод:	A00V R721 00

Error code:	0CH
Description:	Power supply cooling fan motor malfunction • The fan motor lock signal remains HIGH for a predetermined consecutive period of time while the power supply cooling fan motor remains energized.
Causes:	An error occurred in the CR motor operating sequence
Remedy:	1 Check the FM1 connector for proper connection and correct as necessary. 2 Check FM1 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 M1 operation check. PRCB PJ4PRCB-1 (REM) PRCB PJ4PRCB-3 (LOCK) C-2. 5 Change PRCB. 6 Change DCPU1.

Error code:	0FH
Description:	Duplex cooling fan motor malfunction

Error code:	10H
Description:	Polygon motor malfunction • A low motor lock signal is not detected even after the lapse of a predetermined period of time after the polygon motor has been started. • The motor lock signal remains HIGH for a predetermined consecutive period of time while the polygon motor remains energized.
Causes:	• CIS Unit failure • Scanner Housing failure • Main Board failure
Remedy:	1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB.

Error code:	12H
Description:	Laser malfunction • The SOS signal is not detected within a predetermined period of time after the output of a laser has been started. • The SOS signal is never detected in the image area.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Pickup Motor driver failure (Main Board failure)
Remedy:	1 Check the cable and connector for proper connection and correct as necessary. 2 Change PH unit. 3 Change PRCB.

Error code:	14H
Description:	2nd image transfer pressure /retraction failure • The state of the retraction position sensor/2nd image transfer is not changed from the unblocked to blocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/2nd image transfer is in the unblocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/2nd image transfer is not blocked (roller in the retracted position) within a predetermined period of time after the retraction sequence of the 2nd transfer roller has been started. • The retraction position sensor/2nd image transfer is not unblocked (roller in the pressed position) within a predetermined period of time after the pressure sequence of the 2nd transfer roller has been started.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Pickup Motor failure • Pickup drive mechanism (2nd cassette) overload (paper jam/foreign object) • Cable disconnection
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SD4 connector for proper connection and correct as necessary. 4 Check the PRCB connector for proper connection and correct as necessary. 5 PS5 sensor check. PRCB PJ14PRCB-3 (ON) J to K-3. 6 SD4 operation check. PRCB PJ11PRCB-2 (REM) J to K-1. 7 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 8 Change PRCB.

Error code:	15H
Description:	Cleaning blade pressure /retraction failure • The state of the retraction position sensor/cleaning blade is not changed from the blocked to unblocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/cleaning blade is in the blocked state even after the lapse of a predetermined period of time during predrive. • The retraction position sensor/cleaning blade is not unblocked (blade in the retracted position) within a predetermined period of time after the retraction sequence of the cleaning blade has been started. • The retraction position sensor/cleaning blade is not blocked (blade in the pressed position) within a predetermined period of time after the pressure sequence of the cleaning blade has been started.
Remedy:	1 Check the M1 connector for proper connection and correct as necessary. 2 Check M1 for proper drive coupling and correct as necessary. 3 Check the SD3 connector for proper connection and correct as necessary. 4 Check the PRCB connector for proper connection and correct as necessary. 5 PS6 sensor check. PRCB PJ9PRCB-11 (ON) C-5. 6 SD3 operation check. PRCB PJ10PRCB-5 (REM) C-3. 7 M1 operation check. PRCB PJ8PRCB-5 (REM) PRCB PJ8PRCB-8 (LOCK) C-4. 8 Change PRCB.

Error code:	16H
Description:	Transfer belt rotation failure • The belt positioning sensor does not detect the transfer belt position detection hole a second time even after the lapse of a predetermined period of time after it has detected one while the transfer belt is rotated.
Causes:	• Pickup drive mechanism (2nd cassette) overload (paper jam/foreign object)
Remedy:	1 Check the PRCB connector for proper connection and correct as necessary. 2 PS4 sensor check. PRCB PJ9PRCB-8 (ON) C-5. 3 Change transfer belt unit. 4 Change PRCB.

Error code:	17H
Description:	Rack rotation failure • The rack positioning sensor is in the blocked state when the rack motor remains deenergized. • The rack positioning sensor is not blocked a second time even after the lapse of a predetermined period of time after it has been blocked once while the rack motor remains energized. • The rack positioning sensor is unable to detect the deceleration control position after the lapse of a given period of time after the rack motor has started while the rack motor is turning. • The count value of the edge of ON signal of the rack positioning sensor during each developing positions are not a predetermined value while the rack motor is turning.
Remedy:	1 Check the M2 connector for proper connection and correct as necessary. 2 Check M2 for proper drive coupling and correct as necessary. 3 Check the PRCB connector for proper connection and correct as necessary. 4 PS3 sensor check. PRCB PJ5PRCB-11 (ON) C-6 5 M2 operation check. PRCB PJ5PRCB-1 to 4 (Pulse Output) C-6 to 7. 6 Change PRCB.

Error code:	18H
Description:	Heating roller warm-up failure • The thermistor does not detect a predetermined temperature value even after the lapse of a predetermined period of time after the current warm-up cycle has been started and the current warm-up cycle is thus not completed.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Paper jam
Remedy:	1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary. 3 Check the lever of the safety switch and correct as necessary. 4 Change the fusing unit. 5 Change PRCB. 6 Change DCPU1.

Error code:	19H
Description:	Abnormally low heating roller temperature • The temperature detected by the thermistor remains lower than a predetermined value for a predetermined period of time.
Causes:	• Pickup Encoder failure (contaminated/detached scale, Encoder Board failure) • Motor driver failure (Main Board failure)
Remedy:	1 Check the fusing unit for correct installation (whether it is secured in position). 2 Check the fusing unit, DCPU1, and PRCB for proper connection and correct as necessary. 3 Check the lever of the safety switch and correct as necessary. 4 Change the fusing unit. 5 Change PRCB. 6 Change DCPU1.