Konica-Minolta bizhub 7718
Рейтинг
Модули
PAPER TRANSPORT SECTION
FUSING & PAPER EXIT SECTION
FRAME SECTION
HOPPER SECTION
EXTERNAL PARTS
IR SECTION
CASSETTE SECTION
DEVELOPING SECTION
PAPER TAKE-UP SECTION
ORIGINAL COVER
PRINT HEAD SECTION
CHARGE SECTION
DRIVE SECTION
MANUAL PAPER FEED SECTION
ELECTRICAL COMPONENTS
IR SECTION 2
Детали MANUAL PAPER FEED SECTION
| Деталь: | RIGHT COVER |
| Парткод: | A0XX PP3K 00 |
| Деталь: | FAN MOTOR |
| Парткод: | 9J03 M100 00 |
| Деталь: | SCREW |
| Парткод: | 4163 5293 01 |
| Деталь: | LEVER |
| Парткод: | A0XX PP3J 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XX PP1V 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP3M 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XX PP1X 00 |
| Деталь: | BUSHING |
| Парткод: | A0XX PP3H 00 |
| Деталь: | NEUTRALIZING NEEDLE |
| Парткод: | A0XX PP0S 00 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP50 00 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP5M 00 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP51 00 |
| Деталь: | TRANSFER ROLLER ASSY |
| Парткод: | A0XX PP6H 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX PP0T 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX PP1U 00 |
| Деталь: | HINGE |
| Парткод: | A0XX PP0Y 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP0B 00 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XX PP0V 00 |
| Деталь: | RESISTOR |
| Парткод: | 9455 3078 01 |
| Деталь: | CONTACT |
| Парткод: | A0XX PP0U 00 |
| Деталь: | RIGHT LOWER COVER |
| Парткод: | A0XX PP2S 00 |
| Деталь: | Fusing/Paper Exit Assy 230V |
| Парткод: | A0XX PP6X 00 |
| Деталь: | Fusing/Paper Exit Assy 120V |
| Парткод: | A0XX PP70 00 |
| Деталь: | Fusing/Paper Exit Assy 110V |
| Парткод: | A0XX PP6Y 00 |
| Деталь: | PLATE NUT |
| Парткод: | 4002 5042 02 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP05 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX PP14 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP07 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4021 2101 01 |
| Деталь: | CONTACT |
| Парткод: | A0XX PP16 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX PP15 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP39 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP48 00 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XX PP1M 00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | 4038 3511 02 |
| Деталь: | MICRO SWITCH |
| Парткод: | 9J06 M601 00 |
| Деталь: | LEVER |
| Парткод: | A0XX PP47 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP2U 00 |
| Деталь: | REINFORCE PLATE |
| Парткод: | A0XX PP1P 00 |
| Деталь: | RUBBER FOOT |
| Парткод: | 4128 2019 01 |
| Деталь: | STOPPER |
| Парткод: | 4686 3304 01 |
| Деталь: | SWITCH |
| Парткод: | A0XX PP00 00 |
| Деталь: | REINFORCE PLATE |
| Парткод: | A0XX PP1Q 00 |
| Деталь: | WASHER |
| Парткод: | A0XX PP78 00 |
| Деталь: | HOPPER DRIVE ASSY |
| Парткод: | A0XX PP6K 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP3U 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP3T 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP3Q 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP3S 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4038 5412 02 |
| Деталь: | JOINT |
| Парткод: | A0ED 2407 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP3V 00 |
| Деталь: | REAR COVER |
| Парткод: | A0XX PP1K 00 |
| Деталь: | Rear upper cover |
| Парткод: | A0XX PP2H 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP4U 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP2R 00 |
| Деталь: | RIGHT REAR COVER |
| Парткод: | A0XX PP2J 00 |
| Деталь: | RIGHT UPPER COVER |
| Парткод: | A0XX PP2G 00 |
| Деталь: | Right Exit Tray |
| Парткод: | A0XX PP2P 00 |
| Деталь: | SPACER |
| Парткод: | A0XX PP5J 00 |
| Деталь: | Print Cover Panel |
| Парткод: | A0XX PP5C 00 |
| Деталь: | Front door |
| Парткод: | A0XX PP2F 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP52 00 |
| Деталь: | FRONT COVER |
| Парткод: | A0XX PP2M 00 |
| Деталь: | FRONT COVER |
| Парткод: | A0XX PP2K 00 |
| Деталь: | LEFT COVER |
| Парткод: | A0XX PP2N 00 |
| Деталь: | Left Exit Tray |
| Парткод: | A0XX PP2Q 00 |
| Деталь: | Rear Left Cover |
| Парткод: | A0XX PP1H 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP2T 00 |
| Деталь: | Label bizhub164 |
| Парткод: | A0XX PP6P 00 |
| Деталь: | Label bizhub184 |
| Парткод: | A0XX PP6N 00 |
| Деталь: | Label bizhub7718 |
| Парткод: | A0XX PP6Q 00 |
| Деталь: | Logo Mark |
| Парткод: | A00J 9455 00 |
| Деталь: | TENSION SPRING |
| Парткод: | A0XX PP1G 00 |
| Деталь: | TIMING BELT |
| Парткод: | A0XX PP5R 00 |
| Деталь: | SCREW |
| Парткод: | A0XX PP5Y 00 |
| Деталь: | COLLAR |
| Парткод: | A0XX PP0M 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP29 00 |
| Деталь: | BRACKET ASSY |
| Парткод: | A0XX PP1E 00 |
| Деталь: | MOTOR |
| Парткод: | A0XX PP5X 00 |
| Деталь: | SCREW |
| Парткод: | A0XX PP61 00 |
| Деталь: | SEAL |
| Парткод: | A0XX PP5N 00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | A0XX PP5U 00 |
| Деталь: | SLIDER |
| Парткод: | A0XX PP4T 00 |
| Деталь: | SEAL |
| Парткод: | A0XX PP6U 00 |
| Деталь: | SLIDER |
| Парткод: | A0XX PP4R 00 |
| Деталь: | FFC CIS |
| Парткод: | A0XX PP0F 00 |
| Деталь: | FRAME |
| Парткод: | A0XX PP28 00 |
| Деталь: | PAD |
| Парткод: | A0XX PP6M 00 |
| Деталь: | SLIDER |
| Парткод: | A0XX PP4S 00 |
| Деталь: | CIS |
| Парткод: | A0XX PP0E 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP2B 00 |
| Деталь: | PULLEY |
| Парткод: | A0XX PP2C 00 |
| Деталь: | MPC Assy |
| Парткод: | A0XX PP6J 00 |
| Деталь: | WEIGHT |
| Парткод: | A0XX PP22 00 |
| Деталь: | SHAFT |
| Парткод: | A0XX PP21 00 |
| Деталь: | PAPER FEED ROLLER |
| Парткод: | A0XX 5602 00 |
| Деталь: | FRONT COVER |
| Парткод: | A0XX PP3D 00 |
| Деталь: | BUSHING |
| Парткод: | A0XX PP3A 00 |
| Деталь: | HANDLE |
| Парткод: | A0XX PP3E 00 |
| Деталь: | LEVER |
| Парткод: | 1164 3061 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 1164 3062 01 |
| Деталь: | RACK |
| Парткод: | A02F 6232 00 |
| Деталь: | CASSETTE |
| Парткод: | A0XX PP3C 00 |
| Деталь: | GEAR 20T |
| Парткод: | 1164 3045 01 |
| Деталь: | LIFTING PLATE |
| Парткод: | A0XX PP3B 00 |
| Деталь: | REGULATING PLATE |
| Парткод: | A02F 6212 00 |
| Деталь: | Label Level |
| Парткод: | A02F 9441 00 |
| Деталь: | FRICTION SHEET |
| Парткод: | A0XX PP79 00 |
| Деталь: | PAWL |
| Парткод: | 1164 3004 03 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A02F 6254 00 |
| Деталь: | REGULATING PLATE |
| Парткод: | A02F 6211 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4038 5601 00 |
| Деталь: | LEVER |
| Парткод: | 4037 3210 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0XX PP3F 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XX PP0R 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XX PP7A 00 |
| Деталь: | Separator Assy |
| Парткод: | A0XX PP6E 00 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP6W 00 |
| Деталь: | SEAL |
| Парткод: | 4030 5204 01 |
| Деталь: | COVER |
| Парткод: | A0XX 3702 00 |
| Деталь: | SEAL |
| Парткод: | A0XX 3731 00 |
| Деталь: | SEAL |
| Парткод: | A0XX 3740 00 |
| Деталь: | SEAL |
| Парткод: | A0XX 3730 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX 3741 00 |
| Деталь: | SEAL |
| Парткод: | A0XX 3713 00 |
| Деталь: | ROLL |
| Парткод: | A0XX 3745 00 |
| Деталь: | BUSHING |
| Парткод: | A0XX 3718 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4163 5231 02 |
| Деталь: | BUSHING |
| Парткод: | A0XX 3734 00 |
| Деталь: | Conveyance Screw |
| Парткод: | A0XX 3711 01 |
| Деталь: | BUSHING |
| Парткод: | A0XX 3735 00 |
| Деталь: | HOUSING |
| Парткод: | A0XX 3701 01 |
| Деталь: | Sensor Wiring |
| Парткод: | A1XU N116 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX 3715 00 |
| Деталь: | COVER |
| Парткод: | A0XX 3712 00 |
| Деталь: | Magnetic sensor |
| Парткод: | A1XU M503 00 |
| Деталь: | Mating Part |
| Парткод: | A0XX 3714 00 |
| Деталь: | SEAL |
| Парткод: | A0DE 3851 00 |
| Деталь: | SEAL |
| Парткод: | A0XX 3703 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX 3716 00 |
| Деталь: | BUSHING |
| Парткод: | A0XX 3736 00 |
| Деталь: | Gear 15/22T |
| Парткод: | A0XX 3724 00 |
| Деталь: | GEAR 15/18T |
| Парткод: | A0XX 3721 00 |
| Деталь: | GEAR 18T |
| Парткод: | A0XX 3723 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX 3720 00 |
| Деталь: | Gear 21T |
| Парткод: | A0XX 3725 00 |
| Деталь: | GEAR 16T |
| Парткод: | A0XX 3722 00 |
| Деталь: | BUSHING |
| Парткод: | A0XX 3717 00 |
| Деталь: | SEAL |
| Парткод: | A0XX 3742 00 |
| Деталь: | FILM |
| Парткод: | A0DE 3713 00 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0XX 3705 00 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0XX 3704 00 |
| Деталь: | DEVELOPING ROLLER |
| Парткод: | A0XX 3709 00 |
| Деталь: | Conveyance Screw |
| Парткод: | A0XX 3710 00 |
| Деталь: | Timing Roller Assy |
| Парткод: | A0XX PP6A 00 |
| Деталь: | SHAFT |
| Парткод: | A0XX PP23 00 |
| Деталь: | ROLLER |
| Парткод: | A0XX PP3P 00 |
| Деталь: | ROLLER |
| Парткод: | A0XX PP55 00 |
| Деталь: | TORSION SPRING |
| Парткод: | 4034 3534 01 |
| Деталь: | ACTUATOR |
| Парткод: | A0XX PP3N 00 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XX PP0X 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP53 00 |
| Деталь: | BUSHING |
| Парткод: | 4025 3572 01 |
| Деталь: | ACTUATOR |
| Парткод: | 1164 3027 01 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP0A 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP09 00 |
| Деталь: | PLATE SPRING |
| Парткод: | 1164 3054 01 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP3G 00 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP0W 00 |
| Деталь: | Hinge Left |
| Парткод: | AOXX PP5Q 00 |
| Деталь: | SHAFT |
| Парткод: | AOXX PP4Q 00 |
| Деталь: | Hinge Right |
| Парткод: | AOXX PP4P 00 |
| Деталь: | ORIGINAL COVER |
| Парткод: | AOXX PP4N 00 |
| Деталь: | PAD |
| Парткод: | AOXX PP5P 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP06 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP44 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX PP17 00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | A0XX PP5S 00 |
| Деталь: | ARM |
| Парткод: | A0XX PP2V 00 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4034 2305 01 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP4W 00 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XX PP1R 00 |
| Деталь: | SCREW |
| Парткод: | A0XX PP60 00 |
| Деталь: | MICRO SWITCH |
| Парткод: | 9J06 M601 00 |
| Деталь: | PH Unit |
| Парткод: | A1XT R700 00 |
| Деталь: | SUPPORTER |
| Парткод: | 4034 2205 01 |
| Деталь: | COMPRESSING SPRING |
| Парткод: | A00J 3070 00 |
| Деталь: | SHOULDER SCREW |
| Парткод: | A0XX PP5T 00 |
| Деталь: | PH Cover |
| Парткод: | A0XX PP1J 00 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP6V 00 |
| Деталь: | IU After Assy |
| Парткод: | A1XU R700 00 |
| Деталь: | SEAL |
| Парткод: | A0XX 3612 00 |
| Деталь: | COVER |
| Парткод: | A0XX 3616 00 |
| Деталь: | SEAL |
| Парткод: | 0910 5507 12 |
| Деталь: | SCREW |
| Парткод: | 4163 5607 02 |
| Деталь: | SEAL |
| Парткод: | A0XX 3610 00 |
| Деталь: | SCREW |
| Парткод: | 4021 5606 01 |
| Деталь: | SHAFT |
| Парткод: | 4021 0166 02 |
| Деталь: | HOLDER |
| Парткод: | 4163 4361 04 |
| Деталь: | Separating Claw |
| Парткод: | A0XX 3611 00 |
| Деталь: | GUIDE |
| Парткод: | 4162 4074 01 |
| Деталь: | SEAL |
| Парткод: | 4163 5605 03 |
| Деталь: | GEAR 14T |
| Парткод: | 4021 5616 01 |
| Деталь: | GEAR 14T |
| Парткод: | 4163 5639 01 |
| Деталь: | SEAL |
| Парткод: | A0XX 3613 00 |
| Деталь: | Conveyance Screw |
| Парткод: | A0XX 3604 00 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0XX 3303 00 |
| Деталь: | Pin /Front |
| Парткод: | A0XX 3309 00 |
| Деталь: | PLATE SPRING |
| Парткод: | A0XX 3306 00 |
| Деталь: | Toner supply Pipe |
| Парткод: | A0XX 3608 00 |
| Деталь: | SEAL |
| Парткод: | A0XX 3606 00 |
| Деталь: | BUSHING |
| Парткод: | A0XX 3605 00 |
| Деталь: | Drive Holder |
| Парткод: | A0XX 3617 01 |
| Деталь: | GEAR 14/14T |
| Парткод: | 4021 5615 01 |
| Деталь: | GEAR 14T |
| Парткод: | 4163 5609 01 |
| Деталь: | BUSHING |
| Парткод: | 4163 5611 01 |
| Деталь: | SEAL |
| Парткод: | 4163 5603 02 |
| Деталь: | Cleaning Part |
| Парткод: | A0XX 3618 00 |
| Деталь: | SEAL |
| Парткод: | 4163 5614 01 |
| Деталь: | FILTER |
| Парткод: | A0XX 3301 00 |
| Деталь: | BUSHING |
| Парткод: | 4163 5625 01 |
| Деталь: | GEAR 22T |
| Парткод: | 4021 5619 01 |
| Деталь: | PLATE SPRING |
| Парткод: | 4021 4368 02 |
| Деталь: | MOUNTING PLATE |
| Парткод: | A0XX 3304 01 |
| Деталь: | GEAR 14/16T |
| Парткод: | 4021 5618 01 |
| Деталь: | SEAL |
| Парткод: | 4163 5617 01 |
| Деталь: | Cleaning Housing |
| Парткод: | A0XX 3602 00 |
| Деталь: | SEAL |
| Парткод: | 4163 5604 03 |
| Деталь: | TORSION SPRING |
| Парткод: | 4163 4072 01 |
| Деталь: | DRUM CHARGE UNIT |
| Парткод: | A1XU R701 00 |
| Деталь: | COVER |
| Парткод: | A0XX 3333 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX 3335 00 |
| Деталь: | CONTACT |
| Парткод: | A0XX 3336 00 |
| Деталь: | SPRING |
| Парткод: | 4021 4108 01 |
| Деталь: | Holder /Rear |
| Парткод: | A0XX 3332 01 |
| Деталь: | Comb electrode |
| Парткод: | A0XX 3338 00 |
| Деталь: | GRID |
| Парткод: | A0XX 3339 00 |
| Деталь: | Pulling Spring |
| Парткод: | A0XX 3341 00 |
| Деталь: | LEVER |
| Парткод: | A0XX 3337 00 |
| Деталь: | Holder /Front |
| Парткод: | A0XX 3331 01 |
| Деталь: | Stable Plate |
| Парткод: | A0XX 3334 00 |
| Деталь: | MOTOR |
| Парткод: | A0XX PP5W 00 |
| Деталь: | SHAFT |
| Парткод: | A0XX PP1Y 00 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP0P 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP38 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP32 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP37 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP36 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP35 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP2W 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP31 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP33 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP2X 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP34 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP30 00 |
| Деталь: | BUSHING |
| Парткод: | 4021 2547 02 |
| Деталь: | SHAFT |
| Парткод: | A0XX PP20 00 |
| Деталь: | CLUTCH |
| Парткод: | A0XX PP5V 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP2Y 00 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP0N 00 |
| Деталь: | TRAY |
| Парткод: | A0XX PP4A 00 |
| Деталь: | TRAY |
| Парткод: | A0XX PP49 00 |
| Деталь: | BRAKE |
| Парткод: | 4038 3286 01 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0XX PP4D 00 |
| Деталь: | REGULATING PLATE |
| Парткод: | A0XX PP4C 00 |
| Деталь: | TORSION SPRING |
| Парткод: | A0XX PP1D 00 |
| Деталь: | PHOTO INTERRUPTER |
| Парткод: | 9335 1300 61 |
| Деталь: | ACTUATOR |
| Парткод: | A0XX PP4M 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP1N 00 |
| Деталь: | BRAKE |
| Парткод: | 4038 3255 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | A0XX PP1T 00 |
| Деталь: | COLLAR |
| Парткод: | A0XX PP6S 00 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP45 00 |
| Деталь: | HOLD PLATE |
| Парткод: | 4038 3215 01 |
| Деталь: | PLATE SPRING |
| Парткод: | 4039 3282 01 |
| Деталь: | BUSHING |
| Парткод: | 4131 3532 02 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP54 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP4V 00 |
| Деталь: | CAM |
| Парткод: | 4038 3236 01 |
| Деталь: | PRESSURE SPRING |
| Парткод: | 4030 3475 01 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP1W 00 |
| Деталь: | FRAME |
| Парткод: | A0XX PP19 00 |
| Деталь: | SHAFT |
| Парткод: | A0XX PP26 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP4H 00 |
| Деталь: | CLUTCH |
| Парткод: | A0XX PP5V 00 |
| Деталь: | GEAR |
| Парткод: | A0XX PP4K 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP02 00 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP1A 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP1C 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP4G 00 |
| Деталь: | SOLENOID |
| Парткод: | 9J06 M200 00 |
| Деталь: | LEVER |
| Парткод: | A0XX PP4J 00 |
| Деталь: | COLLAR |
| Парткод: | A0XX PP57 00 |
| Деталь: | PIN |
| Парткод: | 4036 3014 01 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP5K 00 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP4F 00 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP4B 00 |
| Деталь: | GUIDE PLATE |
| Парткод: | A0XX PP1B 00 |
| Деталь: | PAPER FEED ROLLER |
| Парткод: | A0XX 5947 00 |
| Деталь: | FRICTION SHEET |
| Парткод: | 4687 3281 01 |
| Деталь: | GEAR |
| Парткод: | A0XX PP4E 00 |
| Деталь: | GUIDE |
| Парткод: | 4038 3268 02 |
| Деталь: | GUIDE |
| Парткод: | 4030 3403 01 |
| Деталь: | GUIDE PLATE |
| Парткод: | 4030 3402 01 |
| Деталь: | GUIDE |
| Парткод: | 4038 3269 02 |
| Деталь: | SEPARATION ROLLER |
| Парткод: | 4034 0151 01 |
| Деталь: | GUIDE |
| Парткод: | A0XX PP6T 00 |
| Деталь: | SHAFT |
| Парткод: | A0XX PP24 00 |
| Деталь: | CLUTCH ASSY |
| Парткод: | 4038 3260 01 |
| Деталь: | BUSHING |
| Парткод: | 4030 3093 01 |
| Деталь: | SHAFT |
| Парткод: | A0XX PP25 00 |
| Деталь: | Label Warning |
| Парткод: | A0XX PP77 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP46 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP4Y 00 |
| Деталь: | PW Board Assy CC/MM 16PPM |
| Парткод: | A0XX PP63 00 |
| Деталь: | PW Board Assy CC/MM 18PPM |
| Парткод: | A0XX PP65 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP08 00 |
| Деталь: | HOLDER |
| Парткод: | A0XX PP4X 00 |
| Деталь: | PW Board Assy LV 200V |
| Парткод: | A0XX PP0J 00 |
| Деталь: | PW Board Assy LV 100V |
| Парткод: | A0XX PP0K 00 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP18 00 |
| Деталь: | PCB Support |
| Парткод: | V502 0100 45 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP04 00 |
| Деталь: | HV Transfomer |
| Парткод: | A0XX PP0H 00 |
| Деталь: | LABEL EARTH CAUTION |
| Парткод: | 4037 7406 01 |
| Деталь: | Cord Bush |
| Парткод: | A0XX PP62 00 |
| Деталь: | Power Source Cord /220-240V |
| Парткод: | A0XX PP01 00 |
| Деталь: | BRACKET |
| Парткод: | A0XX PP1S 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP0C 00 |
| Деталь: | Power Supply Wiring |
| Парткод: | A0XX PP0D 00 |
| Деталь: | WIRE HARNESS ASSY |
| Парткод: | A0XX PP03 00 |
| Деталь: | SCREW |
| Парткод: | A0XX PP5Y 00 |
| Деталь: | IR Cover Assy |
| Парткод: | A0XX PP69 00 |
| Деталь: | LCD Assy |
| Парткод: | A0XX PP6F 00 |
| Деталь: | Control Panel Assy (English) |
| Парткод: | A0XX PP66 00 |
| Деталь: | Control Panel (Traditional) |
| Парткод: | A0XX PP67 00 |
| Деталь: | Control Panel Assy (Simplified) |
| Парткод: | A0XX PP68 00 |
| Деталь: | Control Panel (English) |
| Парткод: | A0XX PP5F 00 |
| Деталь: | Control Panel (Traditional) |
| Парткод: | A0XX PP5D 00 |
| Деталь: | Control Panel (Simplified) |
| Парткод: | A0XX PP5E 00 |
| Деталь: | Lens Start Key |
| Парткод: | A0XX PP2E 00 |
| Деталь: | Print Start Key |
| Парткод: | A0XX PP59 00 |
| Деталь: | Print Stop Key |
| Парткод: | A0XX PP58 00 |
| Деталь: | Print Arrow Key |
| Парткод: | A0XX PP5B 00 |
| Деталь: | Print Select Key (Simplified) |
| Парткод: | A0XX PP5H 00 |
| Деталь: | Print Select Key (ENGLISH) |
| Парткод: | A0XX PP5A 00 |
| Деталь: | Print Select Key (Traditional) |
| Парткод: | A0XX PP5G 00 |
| Деталь: | Interrupt Key |
| Парткод: | A0XX PP2D 00 |
| Деталь: | PW Board Assy |
| Парткод: | A0XX PP64 00 |
| Деталь: | FFC Panel |
| Парткод: | A0XX PP0G 00 |
| Деталь: | COVER |
| Парткод: | A0XX PP1F 00 |
Коды ошибок
C0211
C2351
C2557
C2558
C255C
C2702
C3451
C3751
C3752
C3851
C4001
C4101
C5102
C6101
C9401
CC102
CC151
CC153
CC163
CD301
Описание
| Error code: | C0211 |
| Description: | Tray 1 feeder up/down abnormality • The paper feed tray 1 lift-up position sensor is not unblocked even when the transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the standby position to the feed position was started. • The paper feed tray 1 lift-up position sensor is not blocked even when the transport motor has turned for a given number of pulses after the sequence to move the paper lifting plate from the feed position to the standby position was started. |
| Causes: | • Bypass lift-up motor (M26) • Bypass upper limit sensor (PS35) • Bypass lower limit sensor (PS36) • Paper feed/transport drive board (PFTDB) • MFP board (MFPB) |
| Remedy: | 1 Check the M1 connector for proper connection and correct as necessary. 2 Check the connector of M1 for proper drive coupling and correct as necessary. 3 PS17 I/O check PRCB CN6PRCB-7 (ON) D-2. 4 SL1 operation check PRCB CN6PRCB-4 (ON) D-1. 5 M1 operation check PRCB CN34PRCB-10 (REM) PRCB CN34PRCB-13 (LOCK) D-22. 6 Change SL1. 7 Change M1. 8 Change PRCB. |
| Error code: | C2351 |
| Description: | Cleaning motor K error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s. |
| Causes: | Poor contact in the connector terminals. Defective drive transmission system. Defective cleaning motor K. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC16 on the engine PWB and the connector of the cleaning motor K, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective cleaning motor K. Run maintenance item U030 and check if the cleaning motor K operates when YC16- B13 (remote signal) on the engine PWB goes low. If not, replace the cleaning motor K. Defective engine PWB. Run maintenance item U030 and check if YC16-B13 (remote signal) on the engine PWB goes low. If not, replace the engine PWB. |
| Error code: | C2557 |
| Description: | Abnormally low toner density detected black TCR sensor • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 4 % or less for a given number of times consecutively. |
| Causes: | • Developing unit • Toner cartridge • Toner empty sensor/K (PZS/K) • Toner supply motor/K (M12) • Toner cartridge motor/CK (M14) • MFP board (MFPB) |
| Remedy: | 1 M3 operation check (At this time, IU must be non-installation.) PRCB CN39PRCB-1 to 4 D-23. 2 Reinstall imaging unit. 3 Reinstall toner cartridge. 4 Change imaging unit /K. 5 Change PRCB. |
| Error code: | C2558 |
| Description: | Abnormally high toner density detected black TCR sensor • TC ratio in the developing machine, which is determined by toner replenishing amount control mechanism, is 11 % or more for a given number of times consecutively. • When the connector of the TCR sensor is disconnected. |
| Causes: | • Developing unit • Toner cartridge • Sub hopper unit • MFP board (MFPB) |
| Remedy: | 1 Reinstall imaging unit. 2 Reinstall toner cartridge. 3 Change imaging unit /K. 4 Change PRCB. |
| Error code: | C255C |
| Description: | Black TCR sensor adjustment failure • TCR sensor automatic adjustment does not function properly, failing to adjust to an appropriate value. |
| Causes: | • Developing unit • MFP board (MFPB) |
| Remedy: | 1 Reinstall imaging unit /K. 2 Change imaging unit /K. 3 Change PRCB. |
| Error code: | C2702 |
| Description: | Abnormal image transfer voltage • The image transfer voltage remains more than 100 V continuously for a given period of time while the drum remains stationary. |
| Causes: | Transfer roller unit High voltage unit (HV1) Printer control board (PRCB) |
| Remedy: | 1 Check the transfer roller unit for installation. 2 Change HV1. 3 Change PRCB. |
| Error code: | C3451 |
| Description: | Heating Roller warm-up failure • The temperature of the Heating Roller does not reach 100 °C within 50 sec. after the Heating Roller Heater Lamp has been turned ON. • The temperature of the Heating Roller does not reach 100 °C and that of the Fusing Pressure Roller does not reach 195 °C within 200 sec. after the Heating Roller Heater Lamp has been turned ON. • The voltage of the Heating Roller Thermistor does not increase by five steps within 20 sec. after the Heating Roller Heater Lamp has been turned ON. • No zero cross signal is detected even with the lapse of 1 sec. or more after the Heating Roller Heater Lamp has been turned ON. |
| Causes: | Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB) |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-MC and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-MC. 5 Change PU1. |
| Error code: | C3751 |
| Description: | Heating Roller abnormally high temperature • A temperature of 225 °C or more of the Heating Roller is detected for 1 sec. or more. |
| Causes: | Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB) |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-MC and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-MC. 5 Change PU1. |
| Error code: | C3752 |
| Description: | Fusing Pressure Roller abnormally high temperature • A temperature of 190 °C or more of the Fusing Pressure Roller is detected for 1 sec. or more before the start of the heater temperature control. • A temperature of 215 °C or more of the Fusing Pressure Roller is detected for 1 sec. or more after the start of the heater temperature control. |
| Causes: | Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB) |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-MC and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-MC. 5 Change PU1. |
| Error code: | C3851 |
| Description: | Heating Roller abnormally low temperature • No zero cross signal is detected even with the lapse of 1 sec. or more during a standby state, print cycle, or Power Save. • A temperature of 120 °C or less of the Heating Roller is detected for 1 sec. or more during a standby state. • A temperature of 120 °C or less of the Heating Roller is detected for 1 sec. or more during a print cycle. • A temperature of 70 °C or less of the Heating Roller is detected for 1 sec. or more during Power Save. |
| Causes: | Fusing unit Right door switch (SW2) DC power supply (DCPU) Printer control board (PRCB) |
| Remedy: | 1 Check the Fusing Unit for correct installation (whether it is secured in position). 2 Check the Fusing Unit, PWB-MC and PU1 for proper connection and correct or change as necessary. 3 Change Fusing Unit. 4 Change PWB-MC. 5 Change PU1. |
| Error code: | C4001 |
| Description: | Polygon motor synchronization error |
| Causes: | The ready signal is not at the L level when passing 30s after the polygon motor drive starts. |
| Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Polygon motor - Engine PWB Wiring diagram 2 Checking the polygon motor The polygon motor does not rotate properly. Check the rotation sound of the polygon motor, and reattach or replace the LSU if it does not rotate properly. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C4101 |
| Description: | BD initialization error |
| Causes: | The BD signal was not detected for 1s after driving the polygon motor. |
| Remedy: | 1 Checking the connection The connector or the FFC terminal is not properly connected, or the wire or the FFC is faulty. Reconnect the following wire connectors and reconnect the FFC. If there is no continuity, replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. • APC PWB - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C5102 |
| Description: | Main high-voltage error C |
| Causes: | When the flow-in current with the Vpp variable in 3 steps is measured during the Vpp adjustment, difference between the zero current value and 2nd step current value is less than the reference value. (The Vpp is adjusted at warm-up, before calibration or before print when the in-machine temperature varies largely from the one at the last time Vpp adjustment.) |
| Remedy: | 1 Reinstalling the main highvoltage PWB Proper electric current does not flow as the main charger roller contact is not properly grounded. Correct the main charger roller contact (wire spring) at the inner side of the main high-voltage PWB so that it is firmly grounded. Detaching and reattaching the main highvoltage PWB 2 Checking the drum unit and the developer unit The drum or the drum screw is not rotated properly due to the excessive load. Check if the drum or the drum screw is rotated manually, and replace the drum unit if not rotated. Detaching and reattaching the drum unit 3 Replacing drum motor C Drum motor C is faulty. Replace drum motor C. Detaching and reattaching drum drive unit K and drum drive unit MCY 4 Checking the main charger unit Proper electric current does not flow as the foreign objects are adhered on the high-voltage contact of the main charger roller unit. Clean the high-voltage contact of the main charger roller unit and apply conductive grease to the roller shaft. Detaching and reattaching the main charger roller unit 5 Replacing the main charger roller unit Proper electric current does not flow due to deformation or damage of the high-voltage contact of the main charger roller unit. Replace the main charger roller unit and execute U930. Detaching and reattaching the main charger roller unit 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity. • Main highvoltage PWB - Engine PWB Wiring diagram 7 Replacing the main highvoltage PWB The main high-voltage PWB is faulty. Replace the main high-voltage PWB. Detaching and reattaching the main highvoltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C6101 |
| Description: | Scanner home detection failure • When the power switch is turned ON or a scan operation is completed, detecting the home position fails. |
| Causes: | Scanner motor (M4) CIS module (CIS) Printer control board (PRCB) |
| Remedy: | 1 Turn OFF and ON the power switch. 2 Check the connector between M4-PRCB P101 for proper connection and correct as necessary. 3 Check M4 for correct drive coupling and correct as necessary. 4 Check the connector between CIS-PRCB P102 for proper connection and correct as necessary. 5 M4 operation check PRCB P101-1 to 4 11-F 6 Change M4. 7 Change CIS 8 Change PRCB. |
| Error code: | C9401 |
| Description: | Exposure LED lighting failure The output from the CCD sensor is a predetermined value or less during CCD sensor gain adjustment. |
| Causes: | • LED exposure unit (LA201) • Flat cable • CCD board (CCDB) • Scanner drive board (SCDB) • MFP board (MFPB) |
| Remedy: | 1 Check the connection between SCDB-LU201, and correct if necessary. 2 Check the connector between SCDB PJ1-PRCB CN43 for proper connection and correct as necessary. 3 Check the connector between CCDB PJ3-MFPB PJ01 for proper connection and correct as necessary. 4 Replace the LED exposure unit. 5 Replace CCDB. 6 Replace SCDB. 7 Replace PRCB. 8 Replace MFPB. |
| Error code: | CC102 |
| Description: | Controller - engine connection failure • The engine control system can not communicate with the controller. |
| Causes: | Printer control board (PRCB) |
| Remedy: | 1 Turn OFF and ON the power switch. 2 Change PRCB. |
| Error code: | CC151 |
| Description: | ROM contents error upon startup (MSC) • A fault is detected in a sequence of ROM contents check of the MSC (PRCB) during starting |
| Remedy: | 1 Check the ROM version. 2 Rewrite the firmware. 3 Replace the appropriate board. |
| Error code: | CC153 |
| Description: | ROM contents error upon startup (PRT) • A fault is detected in a sequence of ROM contents check of the mechanical control board (MFPB) during starting. |
| Remedy: | 1 Check the ROM version. 2 Rewrite the firmware. 3 Replace the appropriate board. |
| Error code: | CC163 |
| Description: | ROM contents error (PRT) • The wrong model of firmware is detected in the engine during the initial connection to the engine is being checked. |
| Causes: | • eMMC board (eMMC) • MFP board (MFPB) |
| Remedy: | 1 Rewrite the firmware. 2 Change PRCB 2.1. Turn OFF the power switch and replace the current PRCB with a new one. (When using a PRCB of another machine in service, be sure to use a PRCB installed in the same model.) 2.2. Update the PRCB firmware. 2.3. After completing the firmware update, turn OFF and ON the power switch and check to see that warm-up is started. 2.4. When the trouble cannot be solved, reinstall the removed PRCB to the original board. NOTE • When taking the above steps, check whether PRCB is defective or not without replacing the SV ERB. 3 Change SV ERB 3.1. Replace the current SV ERB with a new one. 3.2. Turn ON the power switch and check to see that warm-up is started. (One minute is spent to prepare the new SV ERB for use. During the period, the control panel backlight stays off.) 3.3. Make the specified readjustments. 4 If the above actions do not solve the problem, contact KMBT. |
| Error code: | CD301 |
| Description: | EEPROM error |
| Remedy: | • Contact the responsible people of KMBT before taking some countermeasures. |
Название
Konica Minolta DR114 Фотобарабан
Konica Minolta Печь в сборе
Konica Minolta TN116 Тонер-картридж (2 тубы)
Konica Minolta DV116 Девелопер
Konica Minolta Блок проявки
