Kyocera ECOSYS P2135dn
Рейтинг
Модули
DUPLEX
FRAMES
Fuser Section
CASSETTE ASSEMBLY
ELECTRICAL COMPONENTS
FRAME L
PAPER CASSETTE
PANEL
PAPER FEED SECTION 2
(Узел переноса)
DEVELOPING SECTION
Duplex Section
(Комплекты)
COVERS
Maintenance Kits
DRIVE SECTION
Image Formation Section
Paper Feed Section 1
Детали DEVELOPING SECTION
| Деталь: | Шестерня редуктора |
| Парткод: | 302HS31181 |
| Цена: | 120 ₽ |
| Деталь: | Главный редуктор, в сборе |
| Парткод: | DR-150 |
| Цена: | 4 900 ₽ |
| Деталь: | LOCK COVER TOP R |
| Парткод: | 302F902420 |
| Деталь: | SP BOTTOM MPF L |
| Парткод: | 302F908270 |
| Деталь: | SEPARATOR MPF ASSY |
| Парткод: | 302HS94040 |
| Цена: | 500 ₽ |
| Деталь: | GUIDE TURN MPF |
| Парткод: | 302LZ08020 |
| Деталь: | LOCK COVER |
| Парткод: | 302F908200 |
| Деталь: | SPRING COVER MPF |
| Парткод: | 302HS08320 |
| Деталь: | BUSH 4 DU ROLL |
| Парткод: | 302HS24130 |
| Деталь: | PAD FRICTION MPF |
| Парткод: | 302F908310 |
| Деталь: | SPRING MC |
| Парткод: | 302HS02160 |
| Деталь: | GUIDE MPF R |
| Парткод: | 302HS08241 |
| Деталь: | GUIDE MPF L |
| Парткод: | 302HS08251 |
| Деталь: | GEAR MPF /A-49 MPF A4 |
| Парткод: | 5MVG137DN032 |
| Деталь: | FOOT |
| Парткод: | 302J002010 |
| Деталь: | LEVER STOPPER DLP |
| Парткод: | 302HS02090 |
| Деталь: | SPRING STOPPER DLP |
| Парткод: | 302HS02100 |
| Деталь: | PARTS PWB ERASER SP |
| Парткод: | 302LZ94010 |
| Деталь: | LK-170 |
| Парткод: | 302LZ93030 |
| Деталь: | ACTUATOR REGIST |
| Парткод: | 302LZ24030 |
| Деталь: | SPRING ACTUATOR REG |
| Парткод: | 302HS24070 |
| Деталь: | SPRING EARTH DU FEED |
| Парткод: | 302H402060 |
| Деталь: | SPRING EARTH DU PLATE |
| Парткод: | 302HS02330 |
| Деталь: | ROLLER DU |
| Парткод: | 302HS24160 |
| Деталь: | HOOK PF |
| Парткод: | 302HS02650 |
| Деталь: | SPRING PIN BIAS |
| Парткод: | 302HS02470 |
| Деталь: | BASE MPF |
| Парткод: | 302HS08050 |
| Цена: | 600 ₽ |
| Деталь: | SPRING REG GND |
| Парткод: | 302H402040 |
| Деталь: | PARTS FULL SENSOR ASSY SP |
| Парткод: | 302H994360 |
| Деталь: | M.GLAZE R. 100MJ 1/2W |
| Парткод: | 7RHA2H10701+H01 |
| Деталь: | BRACKET BOTTOM |
| Парткод: | 302HS08100 |
| Деталь: | SPRING SEPARATOR |
| Парткод: | 302HS08170 |
| Деталь: | SPRING CONTACT TC |
| Парткод: | 302HS24300 |
| Деталь: | SPRING EARTH MPF |
| Парткод: | 302HS08210 |
| Деталь: | PLATE EARTH BOTTOM |
| Парткод: | 302HS08230 |
| Деталь: | SPRING BRACKET |
| Парткод: | 302HS08270 |
| Деталь: | SHEET BUSH DU |
| Парткод: | 302HS02700 |
| Деталь: | PIN CONTACT BIAS |
| Парткод: | 302HS02461 |
| Деталь: | HOLDER MC |
| Парткод: | 302HS02132 |
| Деталь: | PARTS TRAY MPF ASSY SP |
| Парткод: | 302LZ94090 |
| Деталь: | PLATE BOTTOM MPF ASSY |
| Парткод: | 302HS94050 |
| Деталь: | HOLDER MCH ASSY |
| Парткод: | 302HS94281 |
| Деталь: | FK-170(E) |
| Парткод: | 302LZ93040 |
| Деталь: | FK-171(E) |
| Парткод: | 302PH93010 |
| Деталь: | FK-170(U) |
| Парткод: | 302LZ93050 |
| Деталь: | FK-171(U) |
| Парткод: | 302PH93020 |
| Деталь: | Накладка площадки отделения бумаги из лотка ручной подачи |
| Парткод: | 302F908311 |
| Цена: | 90 ₽ |
| Деталь: | Ролик отделения бумаги в держателе, в сборе |
| Парткод: | CET4322 |
| Цена: | 450 ₽ |
| Деталь: | Резина ролика отделения бумаги |
| Парткод: | CET4322PT |
| Цена: | 110 ₽ |
| Деталь: | Резина ролика захвата бумаги |
| Парткод: | CET4398BPT |
| Цена: | 110 ₽ |
| Деталь: | Резина ролика подачи бумаги |
| Парткод: | CET7829 |
| Цена: | 150 ₽ |
| Деталь: | SCREW BOX |
| Парткод: | 302F939082 |
| Деталь: | SWITCHING REGULATOR 230V |
| Парткод: | 302HS45013 |
| Деталь: | PARTS SWITCHING REGULATOR 230V SP |
| Парткод: | 302PG94020 |
| Деталь: | SWITCHING REGULATOR 120V |
| Парткод: | 302HS45021 |
| Деталь: | LEVER LOCK CASSETTE |
| Парткод: | 302HS02070 |
| Деталь: | LEVER INTERLOCK SW |
| Парткод: | 302HS02110 |
| Деталь: | SPRING INTERLOCK SW |
| Парткод: | 302HS02120 |
| Деталь: | PIN CASSETTE |
| Парткод: | 302HS02180 |
| Деталь: | SPRING PIN CASSETTE |
| Парткод: | 302HS02190 |
| Деталь: | PARTS PWB CONTROL SP |
| Парткод: | 302L094010 |
| Деталь: | PARTS PWB ASSY MAIN SP |
| Парткод: | 302PJ94040 |
| Деталь: | PARTS PWB ASSY MAIN EU SP |
| Парткод: | 302PJ94050 |
| Деталь: | PLATE POWER SUPPLY |
| Парткод: | 302HS02210 |
| Деталь: | CONN.CORD ASSY PWS-INLET S03238 |
| Парткод: | 302HS46120 |
| Деталь: | PARTS HIGH VOLTAGE UNIT SP |
| Парткод: | 302LZ94041 |
| Цена: | 4 900 ₽ |
| Деталь: | SPRING LOCK CASSETTE |
| Парткод: | 302HS02360 |
| Деталь: | LEVER LOCK CASSETTE L |
| Парткод: | 302HS02390 |
| Деталь: | PARTS MOTOR FAN 80 SP |
| Парткод: | 302LZ94030 |
| Деталь: | PARTS MOTOR FAN 80 ASSY SP |
| Парткод: | 302L094070 |
| Деталь: | SPRING EARTH FAN |
| Парткод: | 302HS02620 |
| Деталь: | CAP NETWORK |
| Парткод: | 302F939090 |
| Деталь: | PLATE OPTION |
| Парткод: | 302HS39040 |
| Деталь: | PLATE OPTION |
| Парткод: | 302K339050 |
| Деталь: | AC CORD ASSY US |
| Парткод: | 7AAACCUS+10H001 |
| Деталь: | PARTS AC CORD EU SP |
| Парткод: | 302FV94010 |
| Деталь: | AC CORD ASSY |
| Парткод: | 302FV45040 |
| Деталь: | Шестерня узла термозакрепления |
| Парткод: | 302F925080 |
| Цена: | 900 ₽ |
| Деталь: | Xerox Phaser 7750DXF |
| Парткод: | 302LZ25020 |
| Цена: | 470 ₽ |
| Деталь: | Тефлоновый вал |
| Парткод: | 302HS25231 |
| Цена: | 3 800 ₽ |
| Деталь: | Xerox WorkCentre PE114e |
| Парткод: | 5MVX441XN001 |
| Цена: | 850 ₽ |
| Деталь: | PANEL UNIT, MFC9840CDW |
| Парткод: | FK-171 |
| Цена: | 7 900 ₽ |
| Деталь: | Тефлоновый вал |
| Парткод: | CET7849 |
| Цена: | 900 ₽ |
| Деталь: | Шестерня тефлонового вала |
| Парткод: | CET6401 |
| Цена: | 290 ₽ |
| Деталь: | GUIDE SIDE L /B-11 CASSETTE A2 |
| Парткод: | 2FM06010 |
| Деталь: | GUIDE SIDE R /B-11 CASSETTE A2 |
| Парткод: | 2FM06020 |
| Деталь: | LEVER BASE CAS REAR |
| Парткод: | 302F909031 |
| Деталь: | SPRING BASE CAS REAR |
| Парткод: | 302F909040 |
| Деталь: | SPRING FIX |
| Парткод: | 302HN09190 |
| Деталь: | PAPER INDICATOR |
| Парткод: | 302HS09070 |
| Деталь: | CURSOR END |
| Парткод: | 302HS09081 |
| Деталь: | LOCK BOTTOM |
| Парткод: | 302HS09100 |
| Деталь: | SPRING BOTTOM L |
| Парткод: | 302HS09120 |
| Деталь: | SPRING BOTTOM R |
| Парткод: | 302HS09130 |
| Деталь: | SPRING LOCK BOTTOM |
| Парткод: | 302HS09140 |
| Деталь: | GEAR CASSETTE |
| Парткод: | 302HS09160 |
| Деталь: | SPRING RETARD |
| Парткод: | 302HS09180 |
| Деталь: | HOLDER RETARD |
| Парткод: | 302HS09260 |
| Деталь: | PAD BOTTOM |
| Парткод: | 302F909210 |
| Деталь: | GUIDE RETARD |
| Парткод: | 302LZ09030 |
| Деталь: | RETARD ROLL ASSY /43487V0005 A4 |
| Парткод: | 302BR06521 |
| Цена: | 4 000 ₽ |
| Деталь: | SPRING STOPPER /A49 CASSETTE A4 |
| Парткод: | 5MMW171LD006 |
| Деталь: | LEVER REAR /A-49 CASSETTE A3 |
| Парткод: | 5MVX541DG002 |
| Деталь: | LEVER SIDE /A-49 CASSETTE A3 |
| Парткод: | 5MVX541DG003 |
| Деталь: | CT-170 |
| Парткод: | 302LZ93071 |
| Деталь: | PLATE BOTTOM ASSY |
| Парткод: | 302HS94000 |
| Деталь: | Блок лазера |
| Парткод: | LK-170 |
| Цена: | 6 000 ₽ |
| Деталь: | GEAR Z25 JOINT |
| Парткод: | 2BL06380 |
| Цена: | 370 ₽ |
| Деталь: | GEAR Z22 /B-11 FRAME A4 |
| Парткод: | 2FM02350 |
| Цена: | 210 ₽ |
| Деталь: | BUSH DU |
| Парткод: | 302F929140 |
| Деталь: | GEAR CLUTCH ASSY A SP |
| Парткод: | 302FM94020 |
| Деталь: | GEAR CLUTCH ASSY B SP |
| Парткод: | 302FM94030 |
| Деталь: | DISCHARGER FD |
| Парткод: | 302H428020 |
| Деталь: | SOLENOID ASSY SP |
| Парткод: | 302H494070 |
| Цена: | 4 500 ₽ |
| Деталь: | BUSH DU |
| Парткод: | 302HN29050 |
| Деталь: | ROLLER FD UP B |
| Парткод: | 302HS28830 |
| Деталь: | COVER FD |
| Парткод: | 302HS28041 |
| Деталь: | GEAR Z21S |
| Парткод: | 302HS28060 |
| Деталь: | SPRING EARTH |
| Парткод: | 302HS28110 |
| Деталь: | SPRING PULLEY |
| Парткод: | 302HS28141 |
| Деталь: | GEAR FD Z29S |
| Парткод: | 302HS28170 |
| Цена: | 230 ₽ |
| Деталь: | PULLEY EXIT /A-49 FUSER A3 |
| Парткод: | 5MVM273DB005 |
| Деталь: | STOPPER 3 /2BT1107 A4 |
| Парткод: | 5MVX111DN007 |
| Деталь: | COVER REAR ASSY SP |
| Парткод: | 302HS94160 |
| Цена: | 7 100 ₽ |
| Деталь: | PULLEY EXIT |
| Парткод: | 302HS28070 |
| Деталь: | SPRING EXIT |
| Парткод: | 302HS28120 |
| Деталь: | SPRING COVER MPF |
| Парткод: | 302HS08320 |
| Деталь: | LOCK COVER |
| Парткод: | 302F908200 |
| Деталь: | PARTS FD ASSY (2L0) SP |
| Парткод: | 302L094110 |
| Деталь: | PARTS FD ASSY (2LZ) SP |
| Парткод: | 302LZ94100 |
| Деталь: | MEA UNIT-DEV Y |
| Парткод: | DV-170 |
| Цена: | 7 300 ₽ |
| Деталь: | Комплект для технического обслуживания |
| Парткод: | MK-170 |
| Деталь: | 2LZ93010 |
| Парткод: | 302LZ93010 |
| Деталь: | 2LZ93020 |
| Парткод: | 302LZ93020 |
| Деталь: | 2LZ93080 |
| Парткод: | 302LZ93080 |
| Деталь: | LEVER DU /B-11 DU A3 |
| Парткод: | 2FM02690 |
| Деталь: | COLLER DU /B-11 DU A3 |
| Парткод: | 2FM21050 |
| Деталь: | PLATE COVER DU B |
| Парткод: | 302HS29020 |
| Деталь: | PULLEY MID /B-11 FRAME A4 |
| Парткод: | 2FM02210 |
| Деталь: | HOLDER DU |
| Парткод: | 302FM21011 |
| Деталь: | STAY DU /B-11 DU A3 |
| Парткод: | 2FM21020 |
| Деталь: | SHAFT PULLEY /B-11 FRAME A4 |
| Парткод: | 302FM02421 |
| Деталь: | PLATE COVER DU |
| Парткод: | 302HS29011 |
| Деталь: | BUSH DU /B-11 FRAME A3 |
| Парткод: | 2FM02140 |
| Деталь: | SPRING DU R /B-11 FRAME A4 |
| Парткод: | 2FM02500 |
| Деталь: | SPRING HOLDER L /B-11 FRAME A4 |
| Парткод: | 2FM02510 |
| Деталь: | SPRING HOLDER R /B-11 FRAME A4 |
| Парткод: | 2FM02520 |
| Деталь: | C STOP RING /X9.5 X 0.6T S-CR |
| Парткод: | 5MBCK9560XSC |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | STOPPER BUSH /B-11 DU A4 |
| Парткод: | 2FM21030 |
| Деталь: | PARTS PLATE COVER DU B ASSY SP |
| Парткод: | 302HS94320 |
| Деталь: | PARTS HOLDER DU ASSY SP |
| Парткод: | 302FM94061 |
| Деталь: | PARTS PLATE COVER DU ASSY SP |
| Парткод: | 302HS94331 |
| Деталь: | MEA UNIT-DEV Y |
| Парткод: | DV-170 |
| Цена: | 7 300 ₽ |
| Деталь: | Комплект для технического обслуживания |
| Парткод: | MK-170 |
| Деталь: | EMBLEM KYOCERA |
| Парткод: | 302F904120 |
| Деталь: | TAPE EMBLEM |
| Парткод: | 302F904130 |
| Деталь: | COVER RIGHT |
| Парткод: | 302L004010 |
| Деталь: | COVER RIGHT |
| Парткод: | 302PJ04010 |
| Деталь: | COVER DIMM |
| Парткод: | 302LZ04030 |
| Деталь: | SHEET TOP COVER |
| Парткод: | 302HS04170 |
| Деталь: | LABEL JAM TK OPERATION |
| Парткод: | 302HS34080 |
| Деталь: | COVER LEFT |
| Парткод: | 302LZ04011 |
| Деталь: | PARTS PWB LCD SP |
| Парткод: | 302L094050 |
| Деталь: | PARTS PWB ASSY PANEL SP |
| Парткод: | 302PJ94070 |
| Деталь: | ACCESS.BAND |
| Парткод: | 7YZM420002++H01 |
| Деталь: | FERRITE CORE |
| Парткод: | 7YBEJ0J0D001H01 |
| Деталь: | COVER RACK |
| Парткод: | 302HS04070 |
| Деталь: | COVER RACK B |
| Парткод: | 302HS04160 |
| Деталь: | CONN.CORD ASSY LCD-RELAY S03394 |
| Парткод: | 302H446020 |
| Деталь: | CONN.CORD ASSY S03863 |
| Парткод: | 302PJ46010 |
| Деталь: | BUTTON A |
| Парткод: | 302H405010 |
| Деталь: | BUTTON B |
| Парткод: | 302H405020 |
| Деталь: | BUTTON C |
| Парткод: | 302H405030 |
| Деталь: | BUTTON D |
| Парткод: | 302H405040 |
| Деталь: | BUTTON D |
| Парткод: | 302PJ05010 |
| Деталь: | LENS LED |
| Парткод: | 302H405110 |
| Деталь: | SHEET BUTTON |
| Парткод: | 302H405080 |
| Деталь: | SHEET LCD |
| Парткод: | 302H404061 |
| Деталь: | LID TOP ASSY |
| Парткод: | 302HS94020 |
| Деталь: | COVER RIGHT ASSY |
| Парткод: | 302L000010 |
| Деталь: | COVER RIGHT ASSY |
| Парткод: | 302PJ00020 |
| Деталь: | COVER TOP B(N) KIT SP |
| Парткод: | 302H494010 |
| Деталь: | COVER FRONT ASSY (2HS) SP |
| Парткод: | 302HS94121 |
| Деталь: | PARTS COVER TOP ASSY SP |
| Парткод: | 302L094030 |
| Деталь: | PARTS COVER TOP ASSY SP |
| Парткод: | 302PJ94010 |
| Деталь: | MK-172/MAINTENANCE KIT DV-172(U) DK-170 |
| Парткод: | 1702LZ7US0 |
| Деталь: | MK-174/MAINTENANCE KIT DV-174(AO) DK-170 |
| Парткод: | 1702LZ8AS0 |
| Деталь: | MK-170/MAINTENANCE KIT DV-170(E) DK-170 |
| Парткод: | 1702LZ8NL0 |
| Деталь: | JOINT SHAFT CASSETTE |
| Парткод: | 302F931350 |
| Деталь: | BUSH FEED DRIVE |
| Парткод: | 302F931490 |
| Деталь: | HOLDER DRIVE |
| Парткод: | 302H431010 |
| Деталь: | COVER HOLDER DRIVE |
| Парткод: | 302H431020 |
| Деталь: | GEAR Z42R |
| Парткод: | 302H431030 |
| Деталь: | GEAR Z34L-Z24L |
| Парткод: | 302H431040 |
| Деталь: | PIN HOLDER A |
| Парткод: | 302H431050 |
| Деталь: | PIN HOLDER B |
| Парткод: | 302H431060 |
| Деталь: | BUSH DRIVE 6 |
| Парткод: | 302H431070 |
| Деталь: | CLUTCH FEED |
| Парткод: | 302HN44111 |
| Цена: | 3 700 ₽ |
| Деталь: | LEVER LIFT BOTTOM |
| Парткод: | 302HS31050 |
| Деталь: | GEAR Z37L FREE |
| Парткод: | 302HS31090 |
| Деталь: | GEAR Z20L CLUTCH |
| Парткод: | 302HS31100 |
| Деталь: | GEAR Z27L CLUTCH |
| Парткод: | 302HS31120 |
| Деталь: | GEAR Z45R CLUTCH |
| Парткод: | 302HS31130 |
| Деталь: | GEAR Z35R IDLE |
| Парткод: | 302HS31140 |
| Деталь: | GEAR Z31L-Z14S |
| Парткод: | 302HS31150 |
| Деталь: | GEAR Z17R FREE |
| Парткод: | 302HS31190 |
| Деталь: | GEAR Z26L FREE |
| Парткод: | 302HS31200 |
| Деталь: | GEAR Z38S MPF |
| Парткод: | 302HS31230 |
| Деталь: | GEAR Z32R |
| Парткод: | 302HS31260 |
| Цена: | 80 ₽ |
| Деталь: | LIFT BOTTOM |
| Парткод: | 302HS31281 |
| Деталь: | SPRING FREE MAG |
| Парткод: | 302HS31320 |
| Деталь: | PIN CLUTCH |
| Парткод: | 302HS31330 |
| Деталь: | SHAFT CASSETTE |
| Парткод: | 302HS31340 |
| Деталь: | PIN HOLDER A |
| Парткод: | 302HS31360 |
| Деталь: | PIN HOLDER B |
| Парткод: | 302HS31370 |
| Деталь: | SPRING LIFT BOTTOM |
| Парткод: | 302HS31380 |
| Деталь: | SPRING FREE Z37L |
| Парткод: | 302HS31410 |
| Деталь: | EARTH PLATE DRIVE |
| Парткод: | 302HS31420 |
| Деталь: | POLYSLIDER 9.5 |
| Парткод: | 302HS31430 |
| Деталь: | SPRING FEED |
| Парткод: | 302HS31440 |
| Деталь: | SOLENOID MPF |
| Парткод: | 302HS44020 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | POLY SLIDER WASHER M6.2X12X0.2T |
| Парткод: | 7BC06062C020H01 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | SPRING EARTH CASSETTE |
| Парткод: | 302HS02370 |
| Деталь: | PARTS MOTOR ASSY SP |
| Парткод: | 302LZ94021 |
| Деталь: | BUSH DU |
| Парткод: | 302F929140 |
| Деталь: | GEAR Z25R DU FEED |
| Парткод: | 302HS24220 |
| Деталь: | GEAR Z26L DU MID |
| Парткод: | 302HS24230 |
| Деталь: | PLATE PF CONNECTOR |
| Парткод: | 302HS02381 |
| Деталь: | SPRING FREE FUSER |
| Парткод: | 302HS31310 |
| Деталь: | GEAR Z27R FREE 2 |
| Парткод: | 302HS31390 |
| Деталь: | SPRING FREE DRUM |
| Парткод: | 302LZ31040 |
| Деталь: | PLATE GEAR DRIVE |
| Парткод: | 302HS31041 |
| Деталь: | PLATE GEAR DRIVE |
| Парткод: | 302PK31010 |
| Деталь: | GEAR Z54R-Z24R |
| Парткод: | 302HS31250 |
| Деталь: | GEAR Z42R FREE 2 |
| Парткод: | 302HS31070 |
| Деталь: | GEAR Z58L |
| Парткод: | 302HS31110 |
| Деталь: | GEAR Z64R-Z21L |
| Парткод: | 302H431080 |
| Деталь: | GEAR Z44R |
| Парткод: | 302HS31180 |
| Деталь: | GEAR Z35S FREE |
| Парткод: | 302HS31210 |
| Цена: | 80 ₽ |
| Деталь: | GEAR Z42R FREE |
| Парткод: | 302HS31220 |
| Деталь: | GEAR Z32L DRUM |
| Парткод: | 302HS31240 |
| Деталь: | DR-150 |
| Парткод: | 302H493040 |
| Деталь: | MC-130 |
| Парткод: | 302HS93070 |
| Деталь: | DK-170 |
| Парткод: | 302LZ93061 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | BUSH REGIST C |
| Парткод: | 302LZ24220 |
| Деталь: | BUSH TC R /A-49 FEED A4 |
| Парткод: | 302A816031 |
| Цена: | 190 ₽ |
| Деталь: | JOINT PICKUP A |
| Парткод: | 302F906170 |
| Деталь: | JOINT PICKUP B |
| Парткод: | 302F906180 |
| Деталь: | PULLEY FEED ASSY |
| Парткод: | 302F906230 |
| Цена: | 750 ₽ |
| Деталь: | PULLEY PICKUP ASSY |
| Парткод: | 302F906240 |
| Цена: | 550 ₽ |
| Деталь: | SHAFT FEED L |
| Парткод: | 302F906272 |
| Деталь: | GEAR FEED Z30H |
| Парткод: | 302F906280 |
| Деталь: | HOLDER FEED |
| Парткод: | 302HS06020 |
| Деталь: | GEAR Z22S FEED |
| Парткод: | 302HS06090 |
| Деталь: | SPRING EARTH REG UP |
| Парткод: | 302LZ02100 |
| Деталь: | SPRING EARTH REG LOW |
| Парткод: | 302HS02260 |
| Деталь: | SPRING EARTH RIGHT |
| Парткод: | 302HS02340 |
| Деталь: | SPRING EARTH DU MID |
| Парткод: | 302HS02410 |
| Деталь: | SPRING EARTH DLP PLATE |
| Парткод: | 302HS02440 |
| Деталь: | FRAME FEED |
| Парткод: | 302HS06010 |
| Деталь: | SHEET REGIST |
| Парткод: | 302HS24181 |
| Деталь: | ROLLER REGIST LOW |
| Парткод: | 302HS24410 |
| Деталь: | CUT WASHER 5.2X9.0X0.8T(BLACK) |
| Парткод: | 7BC460529080H01 |
| Деталь: | ACTUATOR EMPTY A |
| Парткод: | 302LZ06011 |
| Деталь: | ACTUATOR EMPTY B |
| Парткод: | 302HS06071 |
| Деталь: | SPRING TC L |
| Парткод: | 302LZ24090 |
| Деталь: | SPRING ACTUATOR |
| Парткод: | 302HS06120 |
| Деталь: | SPRING PULLEY |
| Парткод: | 302HS06130 |
| Деталь: | SPRING COVER REG |
| Парткод: | 302HS08351 |
| Деталь: | FRAME MPF |
| Парткод: | 302HS08011 |
| Деталь: | SHAFT FEED MPF |
| Парткод: | 302HS08080 |
| Цена: | 90 ₽ |
| Деталь: | ACTUATOR MPF |
| Парткод: | 302HS08110 |
| Цена: | 80 ₽ |
| Деталь: | EMPTY SENSOR KIT SP |
| Парткод: | 302HS94150 |
| Деталь: | GEAR Z20S MPF |
| Парткод: | 302HS08160 |
| Цена: | 80 ₽ |
| Деталь: | SPRING ACTUATOR |
| Парткод: | 302HS08190 |
| Цена: | 60 ₽ |
| Деталь: | ROLLER M/P ASSY |
| Парткод: | 302HS08260 |
| Цена: | 700 ₽ |
| Деталь: | SPRING REGIST LB |
| Парткод: | 302LZ24120 |
| Деталь: | SPRING REGIST RB |
| Парткод: | 302LZ24110 |
| Деталь: | SPRING TC R |
| Парткод: | 302HS24400 |
| Деталь: | BUSH REGIST R |
| Парткод: | 302HS24460 |
| Деталь: | PULLEY EXIT /A-49 FUSER A3 |
| Парткод: | 5MVM273DB005 |
| Деталь: | PARTS ROLLER REGIST UP SP |
| Парткод: | 302LZ94050 |
| Деталь: | P.W.B RFID WITH SOFTWARE |
| Парткод: | 302HS01130 |
| Деталь: | BUSH REGIST |
| Парткод: | 302HS24120 |
| Деталь: | BUSH 6 EW |
| Парткод: | 302HS24140 |
| Деталь: | COVER REG SW |
| Парткод: | 302HS08340 |
| Деталь: | GEAR Z14R REG UP |
| Парткод: | 302HS24190 |
| Деталь: | GEAR Z21L-Z23L REG LOW |
| Парткод: | 302HS24200 |
| Деталь: | GEAR Z17L TC |
| Парткод: | 302LZ24010 |
| Деталь: | BUSH TC R |
| Парткод: | 302HS24250 |
| Цена: | 200 ₽ |
| Деталь: | HOLDER DC BRUSH ASSY |
| Парткод: | 302H494080 |
| Деталь: | SPRING RELEASE TC L |
| Парткод: | 302HS24280 |
| Деталь: | PARTS ROLLER TRANSFER E SP |
| Парткод: | 302LZ94060 |
| Цена: | 4 300 ₽ |
| Деталь: | PARTS ROLLER TRANSFER A SP |
| Парткод: | 302LZ94070 |
| Деталь: | SPRING REGIST C |
| Парткод: | 302HS24360 |
| Деталь: | LEVER LOCK DLP |
| Парткод: | 5MVX431DN005 |
| Деталь: | SENSOR OPT. |
| Парткод: | 7NXSG2481+++H01 |
| Деталь: | PULLEY FEED |
| Парткод: | 302HS06050 |
| Деталь: | SPRING TE SENSOR /A-49 DLP A4 |
| Парткод: | 5MMW261LD036 |
| Деталь: | SPRING LEVER LOCK L |
| Парткод: | 5MMW261LD067 |
| Деталь: | SPRING LEVER LOCK R |
| Парткод: | 5MMW261LD068 |
| Деталь: | SPRING EARTH BRUSH |
| Парткод: | 302HS24310 |
| Деталь: | HOLDER FEED ASSY |
| Парткод: | 302HS94032 |
| Цена: | 3 900 ₽ |
| Деталь: | REGIST LOW KIT |
| Парткод: | 302HS94081 |
Коды ошибок
0100
0110
0120
0150
0170
0420
0840
0970
2000
4000
4200
6000
6020
6030
6400
F000
F010
F020
F040
F050
Описание
| Error code: | 0100 |
| Display: | MAINTENANCE CALL 0100 |
| Description: | Backup memory device error |
| Causes: | Defective flash memory. Defective main PWB. |
| Remedy: | EEPROM (main PWB) 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Check that the EEPROM on the main circuit PWB is peroperly installed on the main circuit PWB and, if not, re-install it. 3. Replace the main PWB |
| Error code: | 0110 |
| Description: | Input value from Linear Encoder is not changed by the Linear Encoder origin setup. When Motor stops during printing, expected movement is not completed on some head. |
| Causes: | Read error of Linear Encoder. Read error of Encoder on Scan Motor side. Belt is not fixed to Head Carriage firmly. |
| Remedy: | Confirm whether Encoder Scale is between the slit of Encoder Module in a whole width of the machine. Check cable connection between Linear Encoder Board and Head Board Confirm connection between Belt and Carriage Linear Encoder replacement Scan Motor replacement Servo Board replacement Main Board replacement |
| Error code: | 0120 |
| Description: | There is a problem with Thermistor for Pre-Heater. |
| Causes: | Thermistor Cable has short circuited or cutline. Thermistor has a problem. |
| Remedy: | Check Cable connection around Thermistor Thermistor replacement |
| Error code: | 0150 |
| Description: | Even though the machine carries out the regular movement, the output of Slider Sensor does not reach the expected value. |
| Causes: | Slider Motor has a problem. Slider Sensor has a problem. Wiring or Flexible Cable has short circuitted or cut-line. Servo Board has a problem. |
| Remedy: | Check Cable connection of Servo Board Check Cable connection of Junction Board Slider Motor replacement Slider Sensor replacement Wiring or Flexible Cable replacement Servo Board replacement |
| Error code: | 0170 |
| Description: | Even though the machine carries out the regular movement, the output of Supply Pump 1 Sensor does not reach the expected value. |
| Causes: | Supply Pump 1 Motor has a problem. Supply Pump 1 Sensor has a problem. Supply Pump 1 Magnet has dropped out. Wiring or Flexible Cable has short circuitted or cut-line. Pump Drive Board has a problem. Servo Board has a problem. |
| Remedy: | Check Cable connection of Servo Board Check Cable connection of Junction Board Check Supply Pump 1 Magnet Supply Pump 1 Motor replacement Supply Pump 1 Sensor replacement Wiring or Flexible Cable replacement Pump Drive Board replacement Servo Board replacement |
| Error code: | 0420 |
| Description: | Paper feeder communication error Communication error between control PWB and optional paper feeder. |
| Causes: | Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF main-PWB. |
| Remedy: | Improper installation paper feeder. Follow installation instruction carefully again. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Defective control PWB. Replace the control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Defective PF main- PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 0840 |
| Description: | Faults of RTC (“Time for maintenance T” is displayed) [Check at power up] The RTC setting has reverted to a previous state. The machine has not been powered for 5 years (compared to the settings stored periodically in the EEPROM). The RTC setting is older than 00:01 on January 1, 2000. [Checked periodically (in 5- minute interval) after powered up] The RTC setting has reverted to a state older than the last time it was checked. 10 minutes have been passed since the previous check. After C840 is detected, the machine enters in disconnection mode after the main power switch has been switched on and off and indicates ‘Maintenance T.’ |
| Causes: | The battery is disconnected from the main PWB Defective main PWB. |
| Remedy: | Battery (main PWB) 1. Make sure that the back-up batteries on the main PWB are not short-circuited. 2. Reset Maintenance T by executing U906. 3. If the same C call is displayed when power is switched on and off, replace the back up battery. 4. If communication error (due to a noise, etc.) is present with the RTC on the main circuit PWB, check the PWB is properly grounded. Main PWB Replace the main PWB |
| Error code: | 0970 |
| Description: | 12 V power down detect Power is disconnected during sleeping. |
| Causes: | Defective power source PWB. |
| Remedy: | Replace the power source PWB and check for correct operation. |
| Error code: | 2000 |
| Description: | DDA Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 4000 |
| Display: | Supplies Drum End Soon. |
| Description: | Command Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 4200 |
| Display: | Supplies Replace Drum |
| Description: | BD steady-state error The BD signal is not detected. |
| Causes: | APC PWB (LSU). Main/Engine PWB. |
| Remedy: | APC PWB (LSU) 1. Confirm that the FCC wiring connector is not distorted and connect the FCC wiring all the way in. Laser scanner unit and main/engine PWB (YC2010) 2. If the FCC wiring is disconnected, shorted or grounded, replace the FCC wiring. 3. Replace the laser scanner unit. Main/Engine PWB 1. Check the main/engine software and upgrade to the latest, if necessary. 2. Replace the main/engine PWB. |
| Error code: | 6000 |
| Description: | Broken fuser heater wire Fuser thermistor 1 does not reach 100° C/212 °F even after 30 s during warming up. The detected temperature of fuser thermistor 1 does not reach the specified temperature (ready indication temperature) for 420 s in warming up after reached to 100° C/212 °F. |
| Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
| Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Power source PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Power source PWB (YC3) and fuser heater PWB (YC3) Fuser heater PWB (YC2) and feed PWB 1 (YC27) Feed PWB 1 (YC1) and Engine PWB (YC6) Fuser heater 1. Replace the fuser unit. |
| Error code: | 6020 |
| Description: | Abnormally high fuser thermistor 1 temperature Fuser thermistor 1 detects a temperature higher than 240°C/464°F for 1 s. |
| Causes: | Deformed connector pin. Defective triac. Shorted fuser thermistor 1. Defective engine PWB. |
| Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 6030 |
| Description: | Broken fuser thermistor 1 wire Input from fuser center thermistor 1 is 1010 or more (A/D value) continuously for 1 s. Verify if A/D read in the differential output won’t change by 4 or more when it was turned on for 10 seconds in a lowtemperature environment. |
| Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 1 wire. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
| Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Fuser thermistor 1 1. Replace the Fuser unit. Fuser thermostat (triggered) 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and fuser heater PWB (YC1) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. |
| Error code: | 6400 |
| Display: | No Belt Unit Open the Front Cover, pull out all Drum Units completely and install the Belt Unit. |
| Description: | Zero-cross signal error While fuser heater ON/OFF control is performed, the zerocross signal is not input within 3 s. |
| Causes: | Fuser unit. |
| Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser heater PWB (YC2) and feed PWB 1 (YC27) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the fuser heater PWB. |
| Error code: | F000 |
| Description: | Communication error between the main unit and CPU |
| Causes: | The panel cannot be detected since the CPU communication between the main PWB and the operation panel main PWB is unavailable. |
| Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 3 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. 5 Replacing the operation panel main PWB The operation panel main PWB is faulty. Replace the panel main PWB. |
| Error code: | F010 |
| Description: | Program read error (SSD) |
| Causes: | The garbled 2bit data was detected during the program read from the flash memory. |
| Remedy: | 1 (When the service call error appears after replacing the SSD) Replacing the SSD along the correct procedures The firmware is not stored in the SSD. Insert the USB memory device containing all released firmware into the main unit, and turn the main power on. Firmware Update 2 Checking the SSD (if lit after replacing the SSD) An SSD out of specification is installed. Install the SSD matching the memory capacity specification. 3 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 4 Checking the SSD The SSD is not properly attached. Check if the SSD terminal is not faulty and clean it. Then, reinstall the SSD. 5 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 6 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 7 Replacing the SSD The SSD is faulty. Backup the data in the SSD at U026. Then, replace the SSD and turn the main power on while installing the USB memory storing the firmware for the affected model n the main unit. 8 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
| Error code: | F020 |
| Description: | System memory error (RAM reading/writing error or CPU memory error) |
| Causes: | The error appears during the reading/writing check of the RAM for the CPU when the main unit starts up. |
| Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 3 Checking the main PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the main PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the main PWB. |
| Error code: | F040 |
| Description: | Option installation error |
| Causes: | The size of the attached main memory is 2 GB when the DSDF is installed. |
| Remedy: | Main memory Replace the main memory with a 4 GB one. DSDF • Remove the DSDF. • Replace the DSDF with an RADF. |
| Error code: | F050 |
| Description: | Engine main program error |
| Causes: | The engine program cannot start up. |
| Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 2 Resetting the main power The print engine ROM checksum is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 3 Checking the EEPROM The EEPROM is not properly attached. Reattach the EEPROM. 4 Checking the engine PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the engine PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the engine PWB. |
