Kyocera FS-1116
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
10000
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Сканер |
|
Копир |
|
Факс |
|
Тип устройства |
МФУ |
Размещение |
настольный |
Макс. формат |
A4 |
Печать фотографий |
|
Телефон |
|
Тип |
лазерный/светодиодный |
Область применения |
малый офис |
Цветность печати |
|
Технология печати |
лазерная |
Число страниц в месяц |
10 000 |
Принтер |
|
Время разогрева |
25 |
Пигментные чернила |
|
Двусторонняя печать |
|
Прямая печать |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 600 |
Время выхода первого отпечатка |
|
| Ч/б | 11 |
Копир |
|
Макс, количество копий за цикл |
99 |
Шаг масштабирования |
0,01 |
Время выхода первой копии |
12 |
Значение масштаба |
|
| Максимальное | 4 |
| Минимальное | 2,54 |
Макс, разрешение (ч/б) |
|
| По X | 600 |
| По Y | 600 |
| По Y | 1 200 |
Скорость цветного копирования |
|
| A4 | 16 |
Сканер |
|
Оттенки серого |
256 |
Глубина цвета |
24 бит |
Тип сканера |
планшетный/протяжный |
Устройство автоподачи оригиналов |
одностороннее |
Макс. формат оригинала |
A4 |
Стандарт TWAIN |
|
Макс, размер сканирования |
|
| По Y | 356 |
| По X | 216 |
Разрешение сканера |
|
| По Х (улучшенное) | 9 600 |
| По Y (улучшенное) | 9 600 |
| По Х | 1 200 |
Скорость сканирования |
|
| Ч/б | 5 |
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
2 000 |
Количество картриджей |
1 |
Печать на: |
|
| Пленках |
|
| Конвертах |
|
| Глянцевой бумаге |
|
| Этикетках |
|
| Карточках |
|
| Матовой бумаге |
|
| CD/DVD |
|
| Рулоне |
|
| Фотобумаге |
|
Плотность бумаги |
|
| Минимальная | 60 |
| Максимальная | 163 |
Факс |
|
Макс, скорость передачи данных |
33,6 Кбит/с |
Память |
150 |
Цветной |
|
Телефон |
|
Caller ID |
|
Спикерфон |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Автоответчик |
|
Стандарт DECT |
|
Шрифты и языки управления |
|
Языки управления |
|
| PostScript 2 |
|
| PostScript 3 |
|
| PostScript |
|
| PPDS |
|
|
|
|
| PCL 5e |
|
| PCL 5c |
|
| PCL 6 |
|
Количество установленных шрифтов |
|
| PCL | 82 |
Лотки |
|
Емкость лотка ручной подачи |
1 |
Подача бумаги |
|
| Стандартная | 251 |
| Максимальная | 251 |
Вывод бумаги |
|
| Стандартный | 100 |
Финишер |
|
Электронная сортировка |
|
Сортер |
|
Сортировка со сдвигом |
|
Степлер |
|
Брошюровщик |
|
Интерфейсы |
|
Веб-интерфейс |
|
Ethernet (RJ-45) |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Bluetooth |
|
LPT |
|
Инфракрасный порт |
|
RS-232 |
|
Устройство для чтения карт памяти |
|
USB |
|
Версия USB |
2,0 |
Количество свободных слотов расширения |
1 |
Память/Процессор |
|
Частота процессора |
300 |
Процессор |
|
Объем памяти |
64 |
Дополнительная информация |
|
Работа от аккумулятора |
|
Экран |
|
Поддержка ОС |
|
| Windows |
|
| Mac OS |
|
| DOS |
|
Потребляемая мощность |
|
| При работе | 348 |
| В режиме ожидания | 20 |
Уровень шума |
|
| В режиме ожидания | 28 |
| При работе | 49 |
Габариты |
|
Вес |
15 |
Глубина |
392 |
Ширина |
476 |
Высота |
489 |
Модули
MFP Unit
FRAMES 1
(Подача и захват бумаги)
(Узел переноса)
Imaging Unit
(Электронные компоненты)
(Узел термозакрепления)
FUSER UNIT
PAPER CASSETTE
COVERS
FRAMES 2
Developer unit
DRIVING UNIT
Детали None
| Деталь: | UNIT OPTICAL MODULE |
| Парткод: | 302G470010 |
| Деталь: | FIXER,CHASSIS |
| Парткод: | 302G470180 |
| Деталь: | UNIT BELT |
| Парткод: | 302G470040 |
| Деталь: | BUTTON, RELEASE |
| Парткод: | 302G470190 |
| Деталь: | COVER,MFP CONTROLLER |
| Парткод: | 302G470200 |
| Деталь: | LINK, RELEASE (R) |
| Парткод: | 302G470210 |
| Деталь: | LINK, RELEASE (L) |
| Парткод: | 302G470220 |
| Деталь: | GUIDER, ARM (R) |
| Парткод: | 302G470230 |
| Деталь: | GUIDER, ARM (L) |
| Парткод: | 302G470240 |
| Деталь: | LATCH:POM |
| Парткод: | 302G470250 |
| Деталь: | COVER,INSIDE (R) |
| Парткод: | 302G470260 |
| Деталь: | COVER,INSIDE (L) |
| Парткод: | 302G470270 |
| Деталь: | SPRING,TORSION (R) |
| Парткод: | 302G470280 |
| Деталь: | SPRING,TORSION (L) |
| Парткод: | 302G470290 |
| Деталь: | SPRING-2:SUS304 |
| Парткод: | 302G470300 |
| Деталь: | PIN,RELEASE BUTTON |
| Парткод: | 302G470310 |
| Деталь: | FFC CABLE 18P |
| Парткод: | 302G470550 |
| Деталь: | FFC CABLE 20P |
| Парткод: | 302G470560 |
| Деталь: | FFC CABLE 22P |
| Парткод: | 302G470570 |
| Деталь: | P.W.BOARD ASSY MFP CONTROLLER |
| Парткод: | 302G570030 |
| Деталь: | COVER,LCD |
| Парткод: | 302G470360 |
| Деталь: | BUTTON,TONER SAVE |
| Парткод: | 302G470400 |
| Деталь: | PANEL,UI |
| Парткод: | 302G470410 |
| Деталь: | BUTTON,START |
| Парткод: | 302G470420 |
| Деталь: | BUTTON,STOP |
| Парткод: | 302G470430 |
| Деталь: | BUTTON,NUMBER |
| Парткод: | 302G470440 |
| Деталь: | BUTTON,ARROW |
| Парткод: | 302G470450 |
| Деталь: | BUTTON,MENU |
| Парткод: | 302G470460 |
| Деталь: | BUTTON,SCAN |
| Парткод: | 302G470470 |
| Деталь: | BUTTON,SCAN-TO |
| Парткод: | 302G470480 |
| Деталь: | BUTTON,SORT |
| Парткод: | 302G470490 |
| Деталь: | LED |
| Парткод: | 302G470510 |
| Деталь: | NAMEPLATE (R) |
| Парткод: | 302G470520 |
| Деталь: | NAMEPLATE,CENTER |
| Парткод: | 302G470530 |
| Деталь: | NAMEPLATE,FAX |
| Парткод: | 302G470540 |
| Деталь: | P.W.BOARD ASSY PANEL |
| Парткод: | 302G570040 |
| Деталь: | UNIT HINGE LITE |
| Парткод: | 302G470070 |
| Деталь: | UNIT HINGE HEAVY |
| Парткод: | 302G470080 |
| Деталь: | PAD ASSY SCANCOPIER U-SHAPE ADF |
| Парткод: | 302G470090 |
| Деталь: | UNIT ADF ROLLER |
| Парткод: | 302G470100 |
| Деталь: | SLIDING ROD |
| Парткод: | 302G470350 |
| Деталь: | UNIT PAPER TRAY |
| Парткод: | 302G470130 |
| Деталь: | UNIT PAPER SUPPORT |
| Парткод: | 302G470110 |
| Деталь: | UNIT STOPPER |
| Парткод: | 302G470120 |
| Деталь: | SCREW: +P-H, TAP-2, 3-8 |
| Парткод: | 302G470170 |
| Деталь: | SCREW:TS-M3-8 |
| Парткод: | 302G470320 |
| Деталь: | RING CSRG B,M4 |
| Парткод: | 302G470330 |
| Деталь: | UNIT MFP |
| Парткод: | 302G545010 |
| Деталь: | UNIT HOUSING UPPER |
| Парткод: | 302G470020 |
| Деталь: | UNIT HOUSING BOTTOM |
| Парткод: | 302G470030 |
| Деталь: | UNIT PANEL |
| Парткод: | 302G570010 |
| Деталь: | UNIT ADF MODULE |
| Парткод: | 302G470060 |
| Деталь: | FRAME BASE |
| Парткод: | 5MVX888CB001 |
| Деталь: | TE SENSOR ASSY |
| Парткод: | 302FV00030 |
| Деталь: | FERRITE CORE,SFT-72SN(TAKEUCHI) |
| Парткод: | M70CA010 |
| Деталь: | CONN.CORD ASSY MAIN-FAX(A) |
| Парткод: | 302G546010 |
| Деталь: | LEVER LOCK DLP |
| Парткод: | 5MVX431DN005 |
| Деталь: | SPRING LEVER LOCK L |
| Парткод: | 5MMW261LD067 |
| Деталь: | SPRING LEVER LOCK R |
| Парткод: | 5MMW261LD068 |
| Деталь: | SPRING TE SENSOR |
| Парткод: | 5MMW261LD036 |
| Деталь: | GUIDE FEED |
| Парткод: | 5MVX865SB008 |
| Деталь: | PLATE EARTH GUIDE |
| Парткод: | 5MMU862SL001 |
| Деталь: | TAPE BRUSH |
| Парткод: | 5MVS812XF003 |
| Деталь: | BRUSH DISCHARGER |
| Парткод: | 5MMS821LD014 |
| Деталь: | SHEET DISCHARGER |
| Парткод: | 5MVS812KF006 |
| Деталь: | LABEL JAM OPERATION |
| Парткод: | 302G402030 |
| Деталь: | ROLLER TRANSFER |
| Парткод: | 5MMT876SN104 |
| Деталь: | GEAR TC Z17 |
| Парткод: | 5MVG127DN131 |
| Деталь: | BUSH TC L |
| Парткод: | 5MVX221DB023 |
| Деталь: | SPRING TC L |
| Парткод: | 302G622010 |
| Деталь: | BUSH TC R |
| Парткод: | 5MVX221DW008 |
| Деталь: | SPRING TC R |
| Парткод: | 302FV02490 |
| Деталь: | SPRING ROLL |
| Парткод: | 302FV02480 |
| Деталь: | LABEL GUIDE DLP |
| Парткод: | 302FV14500 |
| Деталь: | PLATE CONTACT TC |
| Парткод: | 5MMX331LD005 |
| Деталь: | SHEET REGIST |
| Парткод: | 5MVS721KF007 |
| Деталь: | ROLLER FD |
| Парткод: | 5MMT875SN016 |
| Деталь: | BUSH FD |
| Парткод: | 302FV02470 |
| Деталь: | FAN MOTOR |
| Парткод: | 302FV45010 |
| Деталь: | SHEET FAN |
| Парткод: | 302FV02500 |
| Деталь: | COVER MC |
| Парткод: | 5MVB763CB001 |
| Деталь: | PLATE CONTACT MC |
| Парткод: | 5MMX763LD007 |
| Деталь: | ROD INTERLOCK |
| Парткод: | 5MVX763SB011 |
| Деталь: | SPRING INTERLOCK |
| Парткод: | 5MMW451LD001 |
| Деталь: | BUSH REGIST LEFT |
| Парткод: | 5MVX221DB019 |
| Деталь: | SPRING REGIST R |
| Парткод: | 5MMW261LD023 |
| Цена: | 170 ₽ |
| Деталь: | ROLLER REGIST UP |
| Парткод: | 302A806051 |
| Деталь: | ROLLER REGIST LOW |
| Парткод: | 5MMT876SN105 |
| Деталь: | BUSH REGIST C |
| Парткод: | 2FM02180 |
| Деталь: | BUSH REGIST RIGHT |
| Парткод: | 5MVX221DW006 |
| Деталь: | GEAR REGIST Z20 |
| Парткод: | 5MVG127DB047 |
| Деталь: | GEAR REGIST Z13 |
| Парткод: | 5MVG126DB025 |
| Деталь: | PULLEY FEED |
| Парткод: | 5MVM776DB001 |
| Деталь: | ROLLER FEED ASSY |
| Парткод: | 5AAVR0LL+044 |
| Цена: | 900 ₽ |
| Деталь: | BUSH A |
| Парткод: | 5MVM176DN016 |
| Деталь: | PIN CONTACT BIAS |
| Парткод: | 5MMT365SN003 |
| Деталь: | SPRING PIN BIAS |
| Парткод: | 5MMW361LD028 |
| Деталь: | ACTUATOR EMPTY |
| Парткод: | 5MVX552DB001 |
| Деталь: | ACTUATOR REGIST |
| Парткод: | 5MVX441SB006 |
| Деталь: | SPRING ACTUATOR |
| Парткод: | 5MMW261LD066 |
| Деталь: | BKT ACTUATOR EXIT |
| Парткод: | 5MVX432SB014 |
| Деталь: | ACTUATOR EXIT |
| Парткод: | 5MVX442SB011 |
| Деталь: | SPRING EXIT |
| Парткод: | 5MMW261LD069 |
| Деталь: | SHAFT FEED |
| Парткод: | 5MMT766SN011 |
| Деталь: | CLUTCH REGIST |
| Парткод: | 5AAVCLTCH032 |
| Деталь: | CLUTCH FEED |
| Парткод: | 5AAVCLTCH028 |
| Деталь: | PLATE EARTH B |
| Парткод: | 5MMX643LD006 |
| Деталь: | PIN DRIVE |
| Парткод: | 5MMT463SN002 |
| Деталь: | GEAR FREE Z28S |
| Парткод: | 5MVG138DN088 |
| Деталь: | GEAR FREE Z46H |
| Парткод: | 5MVG158DN059 |
| Деталь: | SPRING FREE |
| Парткод: | 5MMW371LD006 |
| Деталь: | GEAR Z34S |
| Парткод: | 5MVG148DN107 |
| Деталь: | GEAR FD Z42S |
| Парткод: | 5MVG158DN060 |
| Деталь: | GEAR FD Z45S |
| Парткод: | 5MVG158DN061 |
| Деталь: | GEAR FD Z19S |
| Парткод: | 5MVG127DN130 |
| Деталь: | LID CONTROLLER |
| Парткод: | 302G539010 |
| Деталь: | PLATE EARTH FEED |
| Парткод: | 5MMX522LD013 |
| Деталь: | SPRING REGIST C |
| Парткод: | 2FM02580 |
| Деталь: | RING STOPPER |
| Парткод: | 5MVX111DN003 |
| Деталь: | BOX CONTROLLER |
| Парткод: | 302G539030 |
| Деталь: | P.W.BOARD ASSY FAX NA(IF32)SP |
| Парткод: | 302G570020 |
| Деталь: | P.W.BOARD ASSY FAX CTR(IF35) SP |
| Парткод: | 302G570050 |
| Деталь: | BIND T.T SCREW(+) / M4 X 10 |
| Парткод: | 5MBTPB4010WW |
| Деталь: | +TP T.T SCREW(+) / M4 X 10 CRFREE B-T |
| Парткод: | B4B74100 |
| Деталь: | POLY-SLIDER WASHER 4.1X10X0.3T |
| Парткод: | 5MBWK41A03NN |
| Деталь: | WAVE WASHER / M4X8.0X0.2T |
| Парткод: | 5MBWW43802SP++R |
| Деталь: | POLY SLIDER / M4.1X6.5X0.25T |
| Парткод: | 5MBWK4165+NN |
| Деталь: | SPRING PIN / M2 X 8 |
| Парткод: | 5MBP2008WWLD |
| Деталь: | +TP TAP-TITE S SCREW M3X06 |
| Парткод: | BAB53060 |
| Деталь: | MEA-CASSETTE |
| Парткод: | CT-110 |
| Цена: | 7 000 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-110 |
| Цена: | 8 900 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-110 |
| Цена: | 12 700 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-110 |
| Цена: | 13 100 ₽ |
| Деталь: | MEA-CASSETTE |
| Парткод: | CT-110 |
| Цена: | 7 000 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-110 |
| Цена: | 8 900 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-110 |
| Цена: | 12 700 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-110 |
| Цена: | 13 100 ₽ |
| Деталь: | MC-110 |
| Парткод: | 302FV93070 |
| Деталь: | DK-110 |
| Парткод: | 302FV93012 |
| Деталь: | MEA-CASSETTE |
| Парткод: | CT-110 |
| Цена: | 7 000 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-110 |
| Цена: | 8 900 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-110 |
| Цена: | 12 700 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-110 |
| Цена: | 13 100 ₽ |
| Деталь: | MEA-CASSETTE |
| Парткод: | CT-110 |
| Цена: | 7 000 ₽ |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-110 |
| Цена: | 8 900 ₽ |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-110 |
| Цена: | 12 700 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-110 |
| Цена: | 13 100 ₽ |
| Деталь: | BUSH PRESS |
| Парткод: | 2BY20070 |
| Деталь: | GEAR HEAT Z33 |
| Парткод: | 302A820161 |
| Деталь: | ROLLER PRESS |
| Парткод: | 302DC20061 |
| Цена: | 5 900 ₽ |
| Деталь: | PULLEY EXIT |
| Парткод: | 302FV20130 |
| Деталь: | THERMOSTAT 250V170C |
| Парткод: | 302FV27060 |
| Деталь: | CONN CORD ASSY |
| Парткод: | 5AACCNSX3GEA++R |
| Деталь: | CONN CORD ASSY |
| Парткод: | 5AACCNSX4GEA++R |
| Деталь: | Separator Assy |
| Парткод: | 5AAVSEPRT015 |
| Деталь: | THERMISTOR ASSY |
| Парткод: | 5AAXTM017GEA++R |
| Деталь: | HEATER LAMP U |
| Парткод: | 5HZPB1216320103 |
| Деталь: | HEATER LAMP E |
| Парткод: | 5HZPB2413120103 |
| Цена: | 6 300 ₽ |
| Деталь: | NUT FUSER A |
| Парткод: | 5MMS111SL002 |
| Деталь: | ROLLER HEAT |
| Парткод: | 5MMT876AX002 |
| Цена: | 4 400 ₽ |
| Деталь: | SPRING SEPARATOR |
| Парткод: | 5MMW261LD072 |
| Деталь: | SPRING ACTUATOR |
| Парткод: | 5MMW261LD073 |
| Деталь: | SPRING PRESS |
| Парткод: | 5MMW261SD016 |
| Деталь: | PLATE EARTH FUSER |
| Парткод: | 5MMX533LD003 |
| Деталь: | PLATE CORD |
| Парткод: | 5MMX611RD001 |
| Деталь: | FRAME FUSER UP |
| Парткод: | 5MVB864KB009 |
| Деталь: | FRAME FUSER LOW |
| Парткод: | 5MVB866KB003 |
| Деталь: | GEAR IDLE Z25 |
| Парткод: | 5MVG138XN010 |
| Деталь: | BUSH HEAT R |
| Парткод: | 5MVM188XN015 |
| Деталь: | BUSH HEAT L |
| Парткод: | 5MVM188XN016 |
| Деталь: | LABEL FUSER CAUTION |
| Парткод: | 5MVVL611WN06 |
| Деталь: | ACTUATOR FUSER |
| Парткод: | 5MVX531CB002 |
| Деталь: | BIND T.T SCREW(+) / M3 X 12 |
| Парткод: | 5MBTPB3012PW++R |
| Деталь: | BIND T.T SCREW(+) / M4 X 10 |
| Парткод: | 5MBTPB4010PW++R |
| Деталь: | TP HEAD SCREW(+) / M3 X 6 |
| Парткод: | 5MBSP43006NW++R |
| Деталь: | PARALLEL PIN / M2 X 12 |
| Парткод: | 5MBP2012WPLD |
| Деталь: | PARALLEL PIN / M2X16 |
| Парткод: | 7BP512016+++H01 |
| Деталь: | FK-110(E) |
| Парткод: | 302FV93041 |
| Деталь: | FK-110(U) |
| Парткод: | 302FV93050 |
| Деталь: | STOPPER PAPER |
| Парткод: | 2DC07010 |
| Деталь: | POSITIONING FOLIO PAPER |
| Парткод: | 2DC07020 |
| Деталь: | FILM SEPARATOR |
| Парткод: | 2DC07040 |
| Деталь: | BOTTOM CASSETTE |
| Парткод: | 2FV06180 |
| Деталь: | GUIDE SIDE R |
| Парткод: | 302A807021 |
| Деталь: | GUIDE SIDE L |
| Парткод: | 302A807031 |
| Деталь: | PLATE BOTTOM |
| Парткод: | 302A807171 |
| Деталь: | PAD SEPARATOR |
| Парткод: | 302FV06190 |
| Цена: | 900 ₽ |
| Деталь: | LABEL MANUAL FEED |
| Парткод: | 302FV06210 |
| Деталь: | SEAL BOTTOM CASSETTE |
| Парткод: | 302FV06220 |
| Деталь: | PLATE SIDE GUIDE |
| Парткод: | 5MMP141LD002 |
| Деталь: | PLATE STOPPER |
| Парткод: | 5MMP141LD003 |
| Деталь: | SPRING STOPPER |
| Парткод: | 5MMW171LD006 |
| Деталь: | SPRING LOCK |
| Парткод: | 5MMW251LD045 |
| Деталь: | SPRING SEPARATOR C |
| Парткод: | 5MMW251LD047 |
| Деталь: | SPRING CASSETTE |
| Парткод: | 5MMW552LD004 |
| Деталь: | GUIDE SEPARATOR |
| Парткод: | 5MMX631LD003 |
| Деталь: | TRAY MULTI |
| Парткод: | 5MVB864SB024 |
| Деталь: | BASE CASSETTE |
| Парткод: | 5MVB887SB002 |
| Деталь: | GEAR CASSETTE |
| Парткод: | 5MVG127DN071 |
| Деталь: | PAD BOTTOM |
| Парткод: | 5MVS616XN001 |
| Деталь: | TAPE SEPARATOR OP |
| Парткод: | 5MVS631TX001 |
| Деталь: | MARKER INDICATOR |
| Парткод: | 5MVX321SG002 |
| Деталь: | LEVER REAR |
| Парткод: | 5MVX541DG002 |
| Деталь: | LEVER SIDE |
| Парткод: | 5MVX541DG003 |
| Деталь: | LOCK CASSETTE |
| Парткод: | 5MVX631DN001 |
| Деталь: | SEPARATOR PAPER |
| Парткод: | 5MVX642SH010 |
| Цена: | 170 ₽ |
| Деталь: | LEVER PAPER INDICATOR |
| Парткод: | 5MVX664SH005 |
| Деталь: | GUIDE MULTI L |
| Парткод: | 5MVX762SB019 |
| Деталь: | GUIDE MULTI R |
| Парткод: | 5MVX762SB020 |
| Деталь: | GUIDE TURN |
| Парткод: | 5MVX864SB013 |
| Деталь: | COVER CASSETTE |
| Парткод: | 5MVX876SB010 |
| Деталь: | CT-110 |
| Парткод: | 302FV93081 |
| Деталь: | COVER LID |
| Парткод: | 302G404020 |
| Деталь: | ARM LID L |
| Парткод: | 302G404070 |
| Деталь: | ARM LID R |
| Парткод: | 302G404080 |
| Деталь: | LINK LIFT L |
| Парткод: | 302G404090 |
| Деталь: | LINK LIFT R |
| Парткод: | 302G404100 |
| Деталь: | GEAR ARM DAMPING |
| Парткод: | 302G404110 |
| Деталь: | COVER TOP PRINTER |
| Парткод: | 302G404010 |
| Деталь: | SPRING COVER REAR |
| Парткод: | 5MMW126SD001 |
| Деталь: | SPRING PULLEY FD |
| Парткод: | 302G404060 |
| Деталь: | TRAY SUBTRAY |
| Парткод: | 302G404050 |
| Деталь: | SPRING ARM |
| Парткод: | 302G404150 |
| Деталь: | DAMPER |
| Парткод: | 302G404160 |
| Деталь: | COVER REAR |
| Парткод: | 5MVB874SB011 |
| Деталь: | COVER SIDE R |
| Парткод: | 302G404040 |
| Деталь: | EMBLEM KYOCERA |
| Парткод: | 302F904120 |
| Деталь: | COVER SIDE L |
| Парткод: | 302G404030 |
| Деталь: | TAPE EMBLEM |
| Парткод: | 302F904130 |
| Деталь: | PULLEY FD |
| Парткод: | 5MVM363DB001 |
| Деталь: | DISCHARGER FD |
| Парткод: | 5MVS625XF001 |
| Деталь: | PLATE LOGOTYPE |
| Парткод: | 302G504010 |
| Деталь: | PIN PIVOT OD4 L20 |
| Парткод: | 302G404130 |
| Деталь: | SPRING COVER REAR R |
| Парткод: | 302FV04200 |
| Деталь: | LABEL LID OPERATION |
| Парткод: | 302G404380 |
| Деталь: | SHEET FD |
| Парткод: | 302G404450 |
| Деталь: | SHEET GUIDE SIDE |
| Парткод: | 302G404460 |
| Деталь: | SHEET GUIDE TOP |
| Парткод: | 302G404470 |
| Деталь: | LABEL ENERGY STAR |
| Парткод: | 302G634070 |
| Деталь: | BIND T.T SCREW(+) / M3 X 8 |
| Парткод: | 5MBTPB3008PW++R |
| Деталь: | BIND T.T SCREW(+) / M3 X 12 CRFREE P-T |
| Парткод: | 5MBTPB3012PW++R |
| Деталь: | P.W.B ASSY ENGINE(SP) |
| Парткод: | 302G480010 |
| Деталь: | COVER PWB |
| Парткод: | 5MVS777CB001 |
| Деталь: | PLATE BOTTOM FRAME |
| Парткод: | 5MMX884SL002 |
| Деталь: | UNIT LOW VOLTAGE 100 |
| Парткод: | 302G445010 |
| Деталь: | UNIT LOW VOLTAGE 200 |
| Парткод: | 302G445020 |
| Деталь: | PLATE EARTH A |
| Парткод: | 5MMX541LD002 |
| Деталь: | COVER SCANNER |
| Парткод: | 5MMS875SL007 |
| Деталь: | LK-110 |
| Парткод: | 302FV93092 |
| Деталь: | CONN.CORD ASSY MAIN-LSU |
| Парткод: | 302G446010 |
| Деталь: | CONN CORD ASSY |
| Парткод: | 302FV26052 |
| Деталь: | LABEL LASER CAUTION |
| Парткод: | 302FV12080 |
| Деталь: | FRAME MID |
| Парткод: | 5MVX876XB002 |
| Деталь: | SHUTTER LSU |
| Парткод: | 5MVX821SB014 |
| Деталь: | SHEET ERASER |
| Парткод: | 302FV12070 |
| Деталь: | P.W.B.ASSY KP-5157 |
| Парткод: | 5AAPRELC1008AHR |
| Деталь: | MIRROR LSU |
| Парткод: | 2DC13030 |
| Деталь: | SPRING MIRROR |
| Парткод: | 5MMX221LD034 |
| Деталь: | LEVER STOPPER L |
| Парткод: | 5MVX631SB006 |
| Деталь: | SPRING STOPPER L |
| Парткод: | 5MMW165SD001 |
| Деталь: | LEVER STOPPER R |
| Парткод: | 5MVX631SB007 |
| Деталь: | SPRING STOPPER R |
| Парткод: | 5MMW165SD002 |
| Деталь: | SPRING FULL SENSOR |
| Парткод: | 5MMW261LD070 |
| Деталь: | FULL SENSOR ASSY |
| Парткод: | 302FV00040 |
| Деталь: | LABE CONT OPERATION |
| Парткод: | 302G402040 |
| Деталь: | FAN MOTOR |
| Парткод: | 302G444020 |
| Деталь: | RAIL FRAME |
| Парткод: | 5MVX431SB012 |
| Деталь: | FOOT |
| Парткод: | 5MVX221RB014 |
| Деталь: | CONN.CORD ASSY LVP-MAIN |
| Парткод: | 302G446030 |
| Деталь: | BRACKET FAN |
| Парткод: | 302G402010 |
| Деталь: | AC CORD 120 ASSY |
| Парткод: | 2DC27410 |
| Деталь: | AC CORD ASSY |
| Парткод: | 302FV45020 |
| Деталь: | AC CORD ASSY |
| Парткод: | 302FV45040 |
| Деталь: | CORE 8-16X10 |
| Парткод: | 3HK27050 |
| Деталь: | BIND T.T SCREW(+) / M3 X 8 |
| Парткод: | 5MBTPB3008PW++R |
| Деталь: | BIND T.T SCREW(+) / M3 X 12 |
| Парткод: | 5MBTPB3012PW++R |
| Деталь: | BIND T.T SCREW(+) / M4 X 10 |
| Парткод: | 5MBTPB4010WW |
| Деталь: | +TP TAP-TITE S SCREW M3X06 |
| Парткод: | BAB53060 |
| Деталь: | BIND T.T SCREW(+) / M4 X 6 |
| Парткод: | 5MBTPB4006TW++R |
| Деталь: | +TP TAP-TITE P SCREW M3X08 |
| Парткод: | BAA63080 |
| Деталь: | +TP T.T SCREW(+) / M4 X 10 CRFREE B-T |
| Парткод: | B4B74100 |
| Деталь: | OT.LOCK WASHER / M4X8.5X0.4T |
| Парткод: | 5MBWG40854LD |
| Деталь: | BIND T.T SCREW(+) / M3 X 14 CRFREE S-T |
| Парткод: | 5MBTPB3014TW++R |
| Деталь: | DV-110 230V |
| Парткод: | 302FV93020 |
| Деталь: | DV-112 120V |
| Парткод: | 302FV93030 |
| Деталь: | SPRING GEAR |
| Парткод: | 302FV22160 |
| Деталь: | SOLENOID FEED |
| Парткод: | 302GM44010 |
| Деталь: | SOLENOID REGIST |
| Парткод: | 302GM44020 |
| Деталь: | P.W.B ASSY KP-1113 |
| Парткод: | 5AAPRIFC1037AHR |
| Деталь: | MOTOR MAIN |
| Парткод: | 5AAXMT074GEA |
| Деталь: | SPRING REVERSE |
| Парткод: | 5MMW261LD071 |
| Деталь: | PLATE EARTH DRUM |
| Парткод: | 5MMX321LD040 |
| Деталь: | PLATE DRIVE |
| Парткод: | 5MMX874SL005 |
| Деталь: | GEAR FREE Z26H A |
| Парткод: | 5MVG127DN132 |
| Деталь: | GEAR Z18H |
| Парткод: | 5MVG127DN133 |
| Деталь: | GEAR FREE Z26H B |
| Парткод: | 5MVG138DN089 |
| Деталь: | GEAR Z29H |
| Парткод: | 5MVG138DN090 |
| Деталь: | GEAR Z33H |
| Парткод: | 5MVG148DN108 |
| Деталь: | GEAR Z39H |
| Парткод: | 5MVG148DN109 |
| Деталь: | GEAR Z31H-Z25H |
| Парткод: | 5MVG148DN110 |
| Деталь: | GEAR Z38H-Z26H |
| Парткод: | 5MVG148DN111 |
| Деталь: | GEAR Z45H-Z27H |
| Парткод: | 5MVG158DN062 |
| Деталь: | GEAR Z76H-Z27H |
| Парткод: | 5MVG168DN022 |
| Деталь: | GEAR Z70H-Z34H |
| Парткод: | 5MVG168DN023 |
| Деталь: | PAD SOLENOID |
| Парткод: | 5MVS217SN002 |
| Деталь: | BRACKET DRIVE |
| Парткод: | 5MVX652SB015 |
| Деталь: | BIND T.T SCREW(+) / M3 X 6 |
| Парткод: | 5MBTPB3006TW++R |
| Деталь: | POLY CUT WASHER / M5.2X8.0X0.25T |
| Парткод: | 5MBWL5280+NN |
| Деталь: | SHIM 6.2-1.0T |
| Парткод: | C2895950 |
| Деталь: | DR-110 |
| Парткод: | 302FV93061 |
Коды ошибок
C0150
C0160
C0170
C0180
C0210
C0220
C0800
C2000
C3100
C3200
C4000
C4010
C6000
C6020
C6050
C6400
C7800
C7810
C7980
C7990
CF
Описание
| Error code: | C0150 |
| Description: | Engine EEPROM reading / writing error |
| Causes: | 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing data. 2. The data read reading in 2 points mismatches 8 times continuously. 3. The read data and the write data mismatch 8 times continuously. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the EEPROM on the engine PWB The EEPROM is not properly installed. Reattach the EEPROM on the engine PWB. 3 Checking the EEPROM on the engine PWB The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. Detaching and reattaching the EEPROM 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0160 |
| Description: | Engine PWB EEPROM data error |
| Causes: | The data read from the EEPROM is judged as abnormal. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Executing U021 The storage data in the EEPROM on the engine PWB is faulty. Execute U021. Executing U021 3 Replacing the EEPROM The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. |
| Error code: | C0170 |
| Description: | Charger count error |
| Causes: | The values in one of the billing counters, life counter or the scanner counter mismatch between the main side and the engine side. |
| Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. Detaching and reattaching the main PWB 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0180 |
| Description: | Machine serial number mismatch |
| Causes: | The machine serial Nos. in the main PWB and the EEPROM on the engine PWB mismatch when turning the power on. |
| Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. Executing U004 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0210 |
| Description: | CPU communication problem • Synchronization cannot be taken between the main CPU and engine CPU. |
| Causes: | Defective main PWB. Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Defective main PWB. Replace the main PWB. Poor contact in the connector terminals. Check the connection of connector YC1 on the main PWB and YC1 on the engine PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0220 |
| Description: | CPU communication problem • Synchronization cannot be taken between the main CPU and scanner CPU. |
| Causes: | Defective main PWB. Poor contact in the connector terminals. Defective scanner PWB. |
| Remedy: | Defective main PWB. Replace the main PWB. Poor contact in the connector terminals. Check the connection of connector YC2 on the engine PWB and YC5 on the scanner PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective scanner PWB. Replace the scanner PWB. |
| Error code: | C0800 |
| Description: | Image processing error |
| Causes: | The print sequence jam (J010x) was detected 2 times continuously. |
| Remedy: | 1 Checking the image data The image data is faulty. When this issue occurs only when handling the certain image data, check if the image data is faulty. 2 Checking the situation The printing operation of the certain file is faulty. Acquire the jobs log if the phenomenon can be reproduced by specifying the job when the error was detected.` 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. Detaching and reattaching the main PWB 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
| Error code: | C2000 |
| Description: | Drive motor problem Stable OFF is detected for 1 s continuously after drive motor stability. The drive motor is not stabilized in 6 s since the motor is activated. |
| Causes: | Poor contact in the connector terminals. Defective drive transmission system. Defective drive motor. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and the connector on the drive motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective drive motor. Replace the drive motor. Defective engine PWB. Replace the engine PWB and check for correct operation. |
| Error code: | C3100 |
| Description: | Carriage error |
| Causes: | When turning the power on or finishing originals scan through the scanner, the alignment of the home position sensor (turning on / off the sensor) fails and the error is detected. Then, the error is detected twice continuously even the initial operation is executed. |
| Remedy: | 1 Unlocking the scanner mirror frame The scanner mirror frame is not unlocked. Unlock the scanner mirror frame (lamp unit assy). Unlocking the scanner mirror frame 2 Checking the scanner movement A load is applied to the scanner movement. Check the operation of the lamp by U073 or manually moving it. If there is an excess load, check if there are any foreign objects on the optical wire or optical wire drum and clean it. After that, apply grease on the scanner rail. Detaching and reattaching the scanner wires 3 Checking the scanner wires The scanner wires are dirty or come off. Clean and reattach the scanner wires. Detaching and reattaching the scanner wires 4 Checking the scanner motor The scanner motor is faulty. Reattach the scanner motor and reconnect the connector. If not repaired, replace it. 5 Checking the belt tension of the scanner motor A load is applied to the scanner movement since the belt tension is improper. Adjust the scanner motor belt tension properly. 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Scanner motor - Engine PWB Wiring diagram 7 Checking the home position sensor The home position sensor is not properly attached. Reattach the home position sensor. 8 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Home position sensor - Engine PWB Wiring diagram 9 Replacing the home position sensor The home position sensor is faulty. Replace the home position sensor. 10 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 11 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3200 |
| Description: | LED lamp startup error |
| Causes: | The white reference data acquired by lighting the LED lamp at the initial operation does not reach the specified value. Or, the light amount detected by the CCD PWB is not enough. (2 or more LED lamps do not light. The light does not reach the CCD PWB due to condensation.) |
| Remedy: | 1 Checking the LED lamp The LED lamp does not light. Execute U061 [CCD] and check if the LED lamp is lit. If not, replace the lamp unit. After that, execute U411 [Table(ChartA)]. Detaching and reattaching the lamp unit 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • CCD PWB - Engine PWB • LED PWB - CCD PWB Wiring diagram 3 Checking the mirror The mirror or lens is frosted due to condensation. Clean the mirrors. If the condensation at the scanner section is resolved naturally by opening the document processor or the platen cover, turn the power switch off and on. 4 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C4000 |
| Description: | Polygon motor synchronization problem • The revolution does not reach the stable speed within 20 s of the START signal. |
| Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
| Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
| Error code: | C4010 |
| Description: | Polygon motor steady-state problem • The polygon motor rotation is not stable for 5 s after the polygon motor rotation has been stabilized. |
| Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
| Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
| Error code: | C6000 |
| Description: | IH heating error 1 |
| Causes: | The fuser center thermistor temperature does not reach 100°C / 212°F when passing 60s since warm-up starts. Or, the ready display temperature is not detected when passing 420s since the fuser center thermistor temperature reaches 100°C / 212°F during warm-up. |
| Remedy: | 1 Executing U169 The IH setting mismatches the power source specification. Set the fuser destination same as the IH PWB voltage at U169. Executing U169 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature cannot be detected properly due to the broken thermostat or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the current PWB The current PWB is faulty. Replace the current PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. |
| Error code: | C6020 |
| Description: | Fuser center thermistor high temperature error |
| Causes: | The fuser center thermistor detects 240°C / 464°F or more for 1s. |
| Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the thermistor error, etc. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
| Error code: | C6050 |
| Description: | Fuser center thermistor low temperature error |
| Causes: | The fuser center thermistor detects less than 100°C / 212°F for 1s after warm-up, or during print or standby. |
| Remedy: | 1 Changing the wall outlet The power voltage descends by 10% or more of the rated voltage when printing. Connect the power cord to a different wall outlet if the power supply voltage descends by 10% or more of the rated voltage. 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 10 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 11 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit |
| Error code: | C6400 |
| Description: | Zero-cross signal error • The engine PWB does not detect the zero-crossing signal (Z CROSS SIG) for 5 s. |
| Causes: | Poor contact in the connector terminals. Defective DC power source PWB. Defective engine PWB |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and YC6 on the DC power source PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective DC power source PWB. Check if the zero-crossing signal is output from YC6-3 on the DC power source PWB. If not, replace the DC power source PCB. Defective engine PWB. Replace the engine PWB if C6400 is detected while YC6-3 on the DC power source PWB outputs the zero-crossing signal. |
| Error code: | C7800 |
| Description: | Outer thermistor broken (For the internal count) |
| Causes: | The external temperature sensor (external thermistor) cannot be accessed. No response is received from the external thermistor 5 times continuously for 5ms or more when accessing the external thermistor. |
| Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Room temperature sensor - Front PWB?• Front PWB - Engine PWB Wiring diagram 2 Replacing the external temperature sensor The external temperature sensor is faulty. Replace the external temperature sensor. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C7810 |
| Description: | Short-circuited external thermistor • The thermistor input value is 0.5 V or less. |
| Causes: | Poor contact in the connector terminals. Defective humidity sensor. Defective engine PWB |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC13 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective humidity sensor. Replace the humidity sensor. Defective engine PWB. Replace the engine PWB. |
| Error code: | C7980 |
| Description: | Waste toner overflow (Waste toner full sensor error) |
| Causes: | The waste toner full sensor detected full (lock) of the waste toner box for 4 times continuously. |
| Remedy: | 1 Checking the waste toner box The waste toner box is full. Detach and reattach the waste toner box and close the waste toner box cover. If the waste toner box is full, replace it. Replacing the Waste Toner Box (Operation Guide - Section 10) 2 Checking the waste toner full sensor The connector is not properly connected. Reconnect the connector of the waste toner full sensor. 3 Cleaning the waste toner box joint section The waste toner is clogged at the waste toner joint section. Clean inside the waste toner box joint section of the main drive unit. Detaching and reattaching the Main Drive Unit 4 Checking the connection The waste toner box joint section and the waste toner box are not properly connected. Realign the wire so that the wire of the relay connector at the waste toner box unit backside is not excessively strained. Then, reconnect the relay connector. After that, reinstall the waste toner box into the main unit. Connection of Relay Connector of Waste Toner Box Unit (Section 4 `Detaching and reattaching waste toner box unit) 5 Firmware upgrade The engine firmware is faulty. Upgrade the engine firmware to the latest version Firmware Update 6 Checking the operation of the weight sensor actuator The weight sensor actuator inside the waste toner box unit does not operate properly. When the voltage from the 2nd pin of connector YC29 on the feed image PWB is not `3.3V (full detection)`, reattach the weight sensor actuator inside the waste toner box unit and check if it operates properly. If not operating properly, replace the waste toner box unit. Detaching and reattaching the Waste Toner Box Unit 7 Replacing the waste toner forwarding unit The waste toner full sensor inside the waste toner forwarding unit misdetects. Replace the waste toner forwarding unit when the voltage from the 2nd pin of connector YC29 on the feed image PWB is `3.3V (full detection)`. Detaching and reattaching the Main Drive Unit 8 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Feed image PWB - Feed drive PWB Service Manual - Section 8 `PWBs` 9 Replacing the feed image PWB The feed image PWB is faulty. Replace the feed image PWB. 10 Replacing the feed drive PWB The feed drive PWB is faulty. Replace the feed drive PWB. |
| Error code: | C7990 |
| Description: | Waste toner reservoir overflow problem (when the total number of copies is 100 thousand sheets or more) • After E31 is displayed, 1,000 sheets are copied. Or waste toner exceeds 5 g. |
| Causes: | Defective waste toner sensor or engine PWB. |
| Remedy: | Shake the process unit from side to side and turn the power switch off and then on. If the problem cannot be solved, replace the process unit. After replacing the process unit, turn the power switch off and then on. If the problem cannot be solved, replace the waste toner sensor or the engine PWB. |
| Error code: | CF |
| Description: | Auto toner adjustment did not take |
| Causes: | • Defective harness (S02400) between engine board and option unit interface connector. • Defective option bulk paper stacker HS-8E. |
| Remedy: | If this error occurs again even after the power switch is turned off and then on again, replace the main board (KP-5191) and check for correct operation. |
