Kyocera FS-1920
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
125000
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Область применения |
большой офис |
Число страниц в месяц |
125 000 |
Печать фотографий |
|
Сканер |
|
Копир |
|
Цветность печати |
|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Макс. формат |
A4 |
Тип устройства |
Принтер |
Принтер |
|
Прямая печать |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
| По X | 1 800 |
| По Y | 600 |
Скорость цветной печати |
|
| A4 | 28 |
Сканер |
|
Стандарт TWAIN |
|
Стандарт WIA |
|
Отправка изображения по e-mail |
|
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
15 000 |
Печать на: |
|
| Фотобумаге |
|
| Этикетках |
|
| Пленках |
|
Языки управления |
|
| PostScript |
|
Лотки |
|
Подача бумаги |
|
| Стандартная | 600 |
Вывод бумаги |
|
| Стандартный | 250 |
Интерфейсы |
|
USB |
|
LPT |
|
Ethernet (RJ-45) |
|
Инфракрасный порт |
|
Память/Процессор |
|
Макс, объем памяти |
288 |
Объем памяти |
32 |
Дополнительная информация |
|
Поддержка ОС |
|
| Linux |
|
| Mac OS |
|
| DOS |
|
| Windows |
|
Уровень шума |
|
| При работе | 55 |
Габариты |
|
Вес |
13 |
Ширина |
345 |
Высота |
300 |
Глубина |
390 |
Модули
Controller Box
FUSER UNIT
Drum Unit
Drive unit
Developer unit
Enclosure
Upper Frame Unit
(Узел переноса)
PAPER CASSETTE
Tray MP Assembly
(Электронные компоненты)
(Узел термозакрепления)
Frame MP Assembly
CASSETTE ASSEMBLY
PAPER FEED UNIT
Детали Frame MP Assembly
| Деталь: | BOX CONTROLLER |
| Парткод: | 2FP03010 |
| Деталь: | FOOT |
| Парткод: | 2BS03110 |
| Деталь: | SHEET CONTROLLER |
| Парткод: | 2BS03090 |
| Деталь: | FAN MOTOR FS-3820N/3830N |
| Парткод: | WNAA1130 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26240 |
| Деталь: | LEVER SW |
| Парткод: | 2BS03120 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26210 |
| Деталь: | PANEL REAR |
| Парткод: | 2B103040 |
| Деталь: | PANEL REAR |
| Парткод: | 2FR03010 |
| Деталь: | PLATE OPTION |
| Парткод: | 3BH26020 |
| Деталь: | SCREW OP |
| Парткод: | 2D903100 |
| Деталь: | RAIL OPTION |
| Парткод: | 2D903070 |
| Деталь: | COVER PWB POWER |
| Парткод: | 2BS03140 |
| Деталь: | SHEET COVER PWB |
| Парткод: | 2FP03020 |
| Деталь: | SWITCHING REGULATOR FS-1920 |
| Парткод: | 2FP28310 |
| Деталь: | SWITCHING REGULATOR FS-1920 |
| Парткод: | 2FP28300 |
| Деталь: | SWITCHING REGULATOR FS-3820N/3830N |
| Парткод: | 2FR28060 |
| Деталь: | SWITCHING REGULATOR FS-3820N/3830N |
| Парткод: | 2FR28050 |
| Деталь: | ROD SW POWER |
| Парткод: | 2BS03070 |
| Деталь: | LID CONTROLLER |
| Парткод: | 2BR03030 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26270 |
| Деталь: | P.W.BOARD ASSY MAIN KP-1053 FS-1920 |
| Парткод: | 2FP01370 |
| Деталь: | P.W.BOARD ASSY MAIN KP-1033 FS-3830N |
| Парткод: | 2FR01010 |
| Деталь: | P.W.BOARD ASSY MAIN KP-1033 FS-3820N |
| Парткод: | 2FK01040 |
| Деталь: | FAN MOTOR FS-1920 |
| Парткод: | WNAA1120 |
| Деталь: | FAN MOTOR FS-3820N/3830N |
| Парткод: | WNAA1100 |
| Деталь: | P.W.BOARD ASSY ENGINE KP-1081 FS-1920 Incl.KMTW,Excl.Philipines |
| Парткод: | 2FP01320 |
| Деталь: | P.W.BOARD ASSY ENGINE KP-1081 FS-1920 Excl.KMTW,Incl.Philippines |
| Парткод: | 2FP01340 |
| Деталь: | P.W.BOARD ASSY ENGINE KP-1081 FS-3830N Incl.KMTW,Excl.Philipines |
| Парткод: | 2FP01250 |
| Деталь: | P.W.BOARD ASSY ENGINE KP-1081 FS-3830N Excl.KMTW,Incl.Philippines |
| Парткод: | 2FP01270 |
| Деталь: | P.W.BOARD ASSY ENGINE KP-1081 FS-3820N Incl.KMTW,Excl.Philipines |
| Парткод: | 2FY01010 |
| Деталь: | P.W.BOARD ASSY ENGINE KP-1081 FS-3820N Excl.KMTW,Incl.Philippines |
| Парткод: | 2FY01030 |
| Деталь: | P.W.BOARD ASSY DIMM KP-1059 FS-1920 |
| Парткод: | 2FP01200 |
| Деталь: | P.W.BOARD ASSY DIMM KP-893 FS-3820N/3830N |
| Парткод: | 2FR01030 |
| Деталь: | FK-67(E) FUSER UNIT FS-1920/3820N,Excl.KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FP93060 |
| Деталь: | FK-67(U) FUSER UNIT FS-1920/3820N,Excl.KMTW |
| Парткод: | 2FP93070 |
| Деталь: | FK-67(ASIA)E FUSER UNIT FS-1920/3820N,KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FP93130 |
| Деталь: | FK-67(ASIA)U FUSER UNIT FS-1920/3820N,KMTW only |
| Парткод: | 2FP93140 |
| Деталь: | FK-68(E) FUSER UNIT FS-3830N,Excl.KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FR93040 |
| Деталь: | FK-68(U) FUSER UNIT FS-3830N,Excl.KMTW |
| Парткод: | 2FR93050 |
| Деталь: | FK-68(ASIA)E FUSER UNIT FS-3830N,KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FR93110 |
| Деталь: | FK-68(ASIA)U FUSER UNIT FS-3830N,KMTW only |
| Парткод: | 2FR93120 |
| Деталь: | FRAME FUSER LOW |
| Парткод: | 2BR20050 |
| Деталь: | ACTUATOR FUSER |
| Парткод: | 2BR20110 |
| Деталь: | SPRING ACTUATOR |
| Парткод: | 2A820520 |
| Деталь: | SHEET FUSER LOW |
| Парткод: | 2FP20190 |
| Деталь: | SHEET DISCHRGER Excl.KMTW/KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FP20200 |
| Деталь: | SHEET EARTH PRESS Excl.KMTW/KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FP20180 |
| Деталь: | BUSH PRESS |
| Парткод: | 2BS20230 |
| Деталь: | SPRING PRESS |
| Парткод: | 2FP20130 |
| Деталь: | PLATE PRESS |
| Парткод: | 2BR20290 |
| Деталь: | PLATE RELEASE R |
| Парткод: | 2BR20280 |
| Деталь: | FRAME FUSER R FS-1920/3820N |
| Парткод: | 2FP20020 |
| Деталь: | FRAME FUSER R FS-3830N |
| Парткод: | 2FR20020 |
| Деталь: | PLATE EARTH FU |
| Парткод: | 2FP20070 |
| Деталь: | PLATE RELEASE L |
| Парткод: | 2BR20270 |
| Деталь: | FRAME FUSER L FS-1920/3820N |
| Парткод: | 2FP20030 |
| Деталь: | FRAME FUSER L FS-3830N |
| Парткод: | 2FR20030 |
| Деталь: | ACTUATOR SOL |
| Парткод: | 2BR20160 |
| Деталь: | SPRING SOL |
| Парткод: | 2BM21060 |
| Деталь: | SOLENOID TDS-KN07A |
| Парткод: | 2BR21050 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26260 |
| Деталь: | ROLLER PRESS Excl.KMTW/KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FP20100 |
| Деталь: | BUSH POM A |
| Парткод: | 2B716270 |
| Деталь: | GEAR EXIT Z21 |
| Парткод: | 2BR20140 |
| Деталь: | LABEL FUSER CAUTION |
| Парткод: | 2A805020 |
| Деталь: | GUIDE CHANGE |
| Парткод: | 2BR20100 |
| Деталь: | FRAME FUSER UP FS-1920/3820N |
| Парткод: | 2FP20010 |
| Деталь: | FRAME FUSER UP FS-3830N |
| Парткод: | 2FR20010 |
| Деталь: | HEATER LAMP |
| Парткод: | WPAAA570 |
| Цена: | 6 700 ₽ |
| Деталь: | HEATER LAMP |
| Парткод: | WPAAA580 |
| Деталь: | ROLLER HEAT FS-1920/3820N,Excl.KMTW/KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FP20110 |
| Деталь: | ROLLER HEAT FS-1920/3820N,KMTW/KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FP20120 |
| Деталь: | ROLLER HEAT FS-3830N,Excl.KMTW/KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FR20080 |
| Деталь: | ROLLER HEAT FS-3830N,KMTW/KMSG/KMTH/KMHG/Philippines |
| Парткод: | 2FR20090 |
| Деталь: | BUSH FUSER FS-1920/3820N |
| Парткод: | 2FP20080 |
| Деталь: | BUSH FUSER FS-3830N |
| Парткод: | 2FR20070 |
| Деталь: | BEARING HEAT FS-1920/3820N |
| Парткод: | 2FP20160 |
| Деталь: | BEARING HEAT FS-3830N |
| Парткод: | G3268060 |
| Деталь: | SPRING EARTH FUSER L FS-1920/3820N |
| Парткод: | 2FP20140 |
| Деталь: | SPRING EARTH FUSER L FS-3830N |
| Парткод: | 2FR20100 |
| Деталь: | SPRING EARTH FUSER R FS-1920/3820N |
| Парткод: | 2FP20150 |
| Деталь: | SPRING EARTH FUSER R FS-3830N |
| Парткод: | 2FR20110 |
| Деталь: | GEAR HEAT Z36 FS-1920/3820N |
| Парткод: | 2FP20050 |
| Деталь: | GEAR HEAT Z46 FS-3830N |
| Парткод: | 2FR20040 |
| Деталь: | GUIDE EXIT UP FS-1920/3820N |
| Парткод: | 2BR20080 |
| Деталь: | GUIDE EXIT UP FS-3830N |
| Парткод: | 2BS20080 |
| Деталь: | PULLEY EXIT |
| Парткод: | 2BR20520 |
| Деталь: | SPRING PULLEY A |
| Парткод: | 2BR20330 |
| Деталь: | SHAFT EXIT |
| Парткод: | 2BR20370 |
| Деталь: | PLATE CORD FS-1920/3820N |
| Парткод: | 2FP20060 |
| Деталь: | PLATE CORD FS-3830N |
| Парткод: | 2FR20050 |
| Деталь: | SPRING SEPARATOR |
| Парткод: | 2BR16440 |
| Деталь: | SEPARATOR |
| Парткод: | 2A820530 |
| Деталь: | CONN.CORD ASSY |
| Парткод: | 2FP26040 |
| Деталь: | CONN.CORD ASSY |
| Парткод: | 2FP26050 |
| Деталь: | THERMISTOR ASSY |
| Парткод: | 2BR21010 |
| Деталь: | THERMOSTAT 250V170C |
| Парткод: | 2BM21680 |
| Деталь: | NUT FUSER A |
| Парткод: | 2BY20050 |
| Деталь: | GEAR IDLE Z28 FS-1920/3820N |
| Парткод: | 2BR20120 |
| Деталь: | GEAR JOINT Z21 FS-3830N |
| Парткод: | 2BS20130 |
| Деталь: | GEAR IDLE Z18 FS-1920/3820N |
| Парткод: | 2BR20150 |
| Деталь: | GEAR IDLE Z28 FS-3830N |
| Парткод: | 2BR20120 |
| Деталь: | BEARING HEAT FS-3830N |
| Парткод: | 2FR20120 |
| Деталь: | P.W.BOARD ASSY FUSER |
| Парткод: | 2FP01180 |
| Деталь: | PIN ASSY |
| Парткод: | 2BR20380 |
| Деталь: | ROLLER EXIT ASSY |
| Парткод: | 2CL16080 |
| Деталь: | DK-67 DRUM UNIT FS-1920/3820N |
| Парткод: | 2FP93010 |
| Деталь: | DK-68 DRUM UNIT FS-3830N |
| Парткод: | 2FR03010 |
| Деталь: | SHAFT DRUM |
| Парткод: | 2FP08010 |
| Деталь: | BLADE ASSY |
| Парткод: | 2FP08040 |
| Деталь: | SHUTTER WASTE |
| Парткод: | 2BS08510 |
| Деталь: | PLATE EARTH LEFT |
| Парткод: | 2BS08220 |
| Деталь: | SPRING SHUTTER |
| Парткод: | 2BR08120 |
| Деталь: | SP EARTH DRUM |
| Парткод: | 2BR08370 |
| Деталь: | SHEET GUIDE DRUM |
| Парткод: | 2B981120 |
| Деталь: | BUSH DRUM RIGHT |
| Парткод: | 2BS08290 |
| Деталь: | PLATEZENNER |
| Парткод: | 2BR08050 |
| Деталь: | PLATE EARTH ZENNER |
| Парткод: | 2BR08060 |
| Деталь: | LOCK DRUM |
| Парткод: | 2BS08530 |
| Деталь: | COVER DRUM TOP |
| Парткод: | 2BR08510 |
| Деталь: | COVER DRUM LEFT |
| Парткод: | 2BS08240 |
| Деталь: | LOCK MCH |
| Парткод: | 2BS08490 |
| Деталь: | SPRING LOCK |
| Парткод: | 2BR08110 |
| Деталь: | MC-60 MCH ASSY |
| Парткод: | 2BR93410 |
| Деталь: | PLATE SEPA R ASSY |
| Парткод: | 2BR69260 |
| Деталь: | SHEET SEPARATOR ASSY |
| Парткод: | 2BR69250 |
| Деталь: | LED ASSY |
| Парткод: | 2FP69000 |
| Деталь: | P.W.BOARD ASSY ERASER |
| Парткод: | 2FP01140 |
| Деталь: | DR-67 DRIVE UNIT FS-1920/3820N |
| Парткод: | 2FP93040 |
| Деталь: | DR-68 DRIVE UNIT FS-3830N |
| Парткод: | 2FR93030 |
| Деталь: | PLATE DRIVE B |
| Парткод: | 2FP22130 |
| Деталь: | GEAR Z88H-Z24H |
| Парткод: | 2FP22050 |
| Деталь: | METAL BUSH KD |
| Парткод: | 2BM17940 |
| Деталь: | GEAR Z214H |
| Парткод: | 2FP22020 |
| Деталь: | GEAR Z82H-Z25H |
| Парткод: | 2FP22040 |
| Деталь: | POLY CUT WASHER |
| Парткод: | C2891080 |
| Деталь: | GEAR Z123H |
| Парткод: | 2FP22030 |
| Деталь: | PLATE DRIVE A |
| Парткод: | 2FP22120 |
| Деталь: | GEAR Z30S |
| Парткод: | 2BS22140 |
| Деталь: | SPRING FREE DR |
| Парткод: | 2BR22160 |
| Деталь: | GEAR Z45H |
| Парткод: | 2FP22170 |
| Деталь: | GEAR FREE Z36S |
| Парткод: | 2BS22160 |
| Деталь: | BUSH DRIVE |
| Парткод: | 2FP22090 |
| Деталь: | SPRING JOINT DRIVE |
| Парткод: | 2FP22210 |
| Деталь: | JOINT DRIVE |
| Парткод: | 2FP22160 |
| Деталь: | MOTOR MAIN FS-1920/3820N |
| Парткод: | 2FP27170 |
| Деталь: | MOTOR MAIN FS-3830N |
| Парткод: | 2FR27020 |
| Деталь: | GEAR Z31H |
| Парткод: | 2FP22080 |
| Деталь: | GEAR Z50H |
| Парткод: | 2FP22180 |
| Деталь: | GEAR FREE Z34H |
| Парткод: | 2BS22190 |
| Деталь: | SPRING REVERSE DR |
| Парткод: | 2BS22050 |
| Деталь: | POLY CUT WASHER |
| Парткод: | 2BR20530 |
| Деталь: | GEAR Z39H |
| Парткод: | 2FP22070 |
| Деталь: | GEAR Z54S-Z44H-Z22S |
| Парткод: | 2BS22250 |
| Деталь: | GEAR Z23S |
| Парткод: | 2BS22130 |
| Деталь: | GEAR Z44S-Z36H |
| Парткод: | 2FP22060 |
| Деталь: | HOLDER CLUTCH |
| Парткод: | 2FP22010 |
| Деталь: | CLUTCH REGIST |
| Парткод: | 2FP27130 |
| Деталь: | CLUTCH FEED |
| Парткод: | 2FP22190 |
| Деталь: | SHAFT CLUTCH |
| Парткод: | 2FP02010 |
| Деталь: | GEAR CL R Z22S |
| Парткод: | 2BS22150 |
| Деталь: | GEAR CL F Z21S |
| Парткод: | 2BS22120 |
| Деталь: | DV-67 DEVELOPER UNIT |
| Парткод: | 2FP93020 |
| Деталь: | STOPPER FD |
| Парткод: | 2BS04070 |
| Деталь: | LID TOP FS-1920 |
| Парткод: | 2B104170 |
| Деталь: | LID TOP FS-1920 |
| Парткод: | 2B104180 |
| Деталь: | LID TOP CHU FS-3820N/3830N |
| Парткод: | 2BR04410 |
| Деталь: | DISCHARGER FD |
| Парткод: | 2BP21010 |
| Деталь: | COVER TOP |
| Парткод: | 2BS04140 |
| Деталь: | GUIDE STOCK |
| Парткод: | 2BS04300 |
| Деталь: | FRAME FD |
| Парткод: | 2BS04340 |
| Деталь: | ACTUATOR FD |
| Парткод: | 2BS04310 |
| Деталь: | ROLLER PINCH |
| Парткод: | 2BS04170 |
| Деталь: | SPRING PINCH |
| Парткод: | 2BS04050 |
| Деталь: | SPACER FD A |
| Парткод: | 2FP04020 |
| Деталь: | COVER FD |
| Парткод: | 2BS04100 |
| Деталь: | COVER REAR |
| Парткод: | 2BS04090 |
| Деталь: | SPRING COVER |
| Парткод: | 2BR04050 |
| Деталь: | COVER FRONT |
| Парткод: | 2BS04110 |
| Деталь: | PANEL ENGLISH |
| Парткод: | 2BR04350 |
| Деталь: | PANEL ITALIAN |
| Парткод: | 2BR04400 |
| Деталь: | PANEL FRENCH |
| Парткод: | 2BR24010 |
| Деталь: | BUTTON PANEL |
| Парткод: | 2FP04010 |
| Деталь: | COVER SIDE |
| Парткод: | 2BS04120 |
| Деталь: | COVER TOP ASSY FS-1920 |
| Парткод: | 2FP04040 |
| Деталь: | COVER TOP ASSY FS-1920 |
| Парткод: | 2FP04050 |
| Деталь: | COVER TOP ASSY FS-3820N/3830N |
| Парткод: | 2FR04010 |
| Деталь: | COVER TOP ASSY FS-3820N/3830N |
| Парткод: | 2FR04020 |
| Деталь: | COVER RIGHT ASSY |
| Парткод: | 2BR04040 |
| Деталь: | KEY BOARD ASSY |
| Парткод: | 2FP68570 |
| Деталь: | COVER LEFT ASSY |
| Парткод: | 2BR04020 |
| Деталь: | FRAME BASE |
| Парткод: | 2FP02030 |
| Деталь: | LOCK COVER M/P |
| Парткод: | 2BS02390 |
| Деталь: | SP LOCK COVER M/P |
| Парткод: | 2BR02340 |
| Деталь: | SPACER BASE |
| Парткод: | 2BR27010 |
| Деталь: | PUSH SWITCH 03 SN |
| Парткод: | SP0A0360 |
| Деталь: | PLATE EARTH HV |
| Парткод: | 2BS02180 |
| Деталь: | FAN MOTOR |
| Парткод: | WNAA1150 |
| Деталь: | BKTFAN |
| Парткод: | 2FP02040 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26230 |
| Деталь: | LEVER EF |
| Парткод: | 2BS02350 |
| Деталь: | SPRING LEVER EF |
| Парткод: | 2BR02280 |
| Деталь: | ROD INTER LOCK FS-1920 |
| Парткод: | 2B102330 |
| Деталь: | ROD INTER LOCK FS-3820N/3830N |
| Парткод: | 2BS02450 |
| Деталь: | SPRING INTER LOCK FS-1920 |
| Парткод: | 2BR02550 |
| Деталь: | SPRING INTER LOCK FS-3820N/3830N |
| Парткод: | 2B700570 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26080 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26250 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26280 |
| Деталь: | FAN MOTOR FS-1920N/3820N |
| Парткод: | WNAA1160 |
| Деталь: | FAN MOTOR FS-3830N |
| Парткод: | WNAA1140 |
| Деталь: | BRACKET FD GEAR A FS-1920N/3820N |
| Парткод: | 2BD02450 |
| Деталь: | BRACKET FD GEAR B FS-3830N |
| Парткод: | 2BS02430 |
| Деталь: | GEAR FD Z29 FS-1920N/3820N |
| Парткод: | 2BD02270 |
| Деталь: | GEAR FD Z23 FS-3830N |
| Парткод: | 2BS02250 |
| Деталь: | GEAR FD Z33 |
| Парткод: | 2BS02270 |
| Деталь: | GEAR FD Z28 |
| Парткод: | 2BS02260 |
| Деталь: | GEAR IDLEZ25 |
| Парткод: | 2BS02240 |
| Деталь: | LEVER LOCK DLP |
| Парткод: | 2BS02420 |
| Деталь: | SPRING LOCK DLP |
| Парткод: | 2BR02190 |
| Деталь: | PLATE CONTACT TC |
| Парткод: | 2BS02190 |
| Деталь: | PLATE CONTACT EARTH |
| Парткод: | 2BS02200 |
| Деталь: | PLATE CONTACT BIAS |
| Парткод: | 2BS02170 |
| Деталь: | PLATE CONTACT MCH |
| Парткод: | 2BS02160 |
| Деталь: | COVER HV |
| Парткод: | 2BS02460 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2D926160 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26130 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26070 |
| Деталь: | BUSH FD |
| Парткод: | 2BS02290 |
| Деталь: | PT.SENSOR GP1A73AJ00 |
| Парткод: | 2DC27180 |
| Деталь: | CONN. CORD ASSY |
| Парткод: | 2FP26180 |
| Деталь: | ROLLER FD |
| Парткод: | 2BR02160 |
| Деталь: | SEAL BASE B |
| Парткод: | 2BS02310 |
| Деталь: | GEAR ROLL FD Z18 |
| Парткод: | 2BS02220 |
| Деталь: | PLATE EARTH SO L |
| Парткод: | 2BR02220 |
| Деталь: | PLATE EARTH SO R FS-1920N/3820N |
| Парткод: | 2BR02560 |
| Деталь: | SPACER SENSOR FD |
| Парткод: | 2FP02050 |
| Деталь: | FERRITE CORE |
| Парткод: | M21C0010 |
| Деталь: | P.W.BOARD ASSY ENGRLY KP-1071 |
| Парткод: | 2FP01160 |
| Деталь: | COVER HV SUB ASSY |
| Парткод: | 2BR04030 |
| Деталь: | P.W.BOARD ASSY SENSOR KP-1077 |
| Парткод: | 2FP01230 |
| Деталь: | TRANS ASSY |
| Парткод: | 2FP28290 |
| Деталь: | LK-67 SCANNER UNIT FS-1920N/3820N |
| Парткод: | 2FP93030 |
| Деталь: | LK-68 SCANNER UNIT FS-3830N |
| Парткод: | 2FR93020 |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-67 |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-67 |
| Цена: | 31 400 ₽ |
| Деталь: | ROLLER-HEAT, ML-1660,AL5052,18.1,247.5 |
| Парткод: | 5MMT888AX026 |
| Цена: | 9 400 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-67 |
| Деталь: | PC-60A4 CASSETTE ASSY Excl.Philippines |
| Парткод: | 2BR93320 |
| Деталь: | PC-60LTR CASSETTE ASSY Excl.KMTW |
| Парткод: | 2BR93400 |
| Деталь: | PC-60LG(A4) CASSETTE ASSY |
| Парткод: | 2BR93360 |
| Деталь: | PC-60LG(LTR) CASSETTE ASSY Excl.KMTW |
| Парткод: | 2BR93390 |
| Деталь: | PC-60A4 CASSETTE ASSY KMTW only |
| Парткод: | 2BR93430 |
| Деталь: | PC-60LTR CASSETTE ASSY Philippines only |
| Парткод: | 2BR93530 |
| Деталь: | PC-60LG(A4) CASSETTE ASSY KMTW/Philippines |
| Парткод: | 2BR93380 |
| Деталь: | BASE CASSETTE A4 PC-60 |
| Парткод: | 2BS06270 |
| Деталь: | BASE CASSETTE LGL PC-60LG |
| Парткод: | 3DD06010 |
| Деталь: | LOCK BOTTOM |
| Парткод: | 2BS06450 |
| Деталь: | HOLDER DIAL |
| Парткод: | 2BS06470 |
| Деталь: | END FENCE |
| Парткод: | 2BS06520 |
| Деталь: | LOCK LEVER SIDE |
| Парткод: | 2BS06490 |
| Деталь: | HOLDER RETARD |
| Парткод: | 2BS06510 |
| Деталь: | Roller feed |
| Парткод: | 2BS06410 |
| Деталь: | BUSH4 |
| Парткод: | 2BS06320 |
| Деталь: | COVER ROLLER |
| Парткод: | 2BS06540 |
| Деталь: | LEVER INDICATOR |
| Парткод: | 2BS06530 |
| Деталь: | INDICATER PAPER |
| Парткод: | 2BS06440 |
| Деталь: | GUIDE RETARD |
| Парткод: | 2BS06480 |
| Деталь: | LOCK LEVER END |
| Парткод: | 2BS06500 |
| Деталь: | GEAR CASSETTE |
| Парткод: | 2B700190 |
| Деталь: | DIAL CASSETTE |
| Парткод: | 2B700210 |
| Деталь: | LABEL SIZE LGL PC-60LG |
| Парткод: | 3DD06160 |
| Деталь: | PLATE BOTTOM |
| Парткод: | 2BS06230 |
| Деталь: | PLATE SIDE R |
| Парткод: | 2BS06050 |
| Деталь: | PLATE SIDE L |
| Парткод: | 2BS06060 |
| Деталь: | EARTH PLATE |
| Парткод: | 2BS06220 |
| Деталь: | SPRING BOTTOM Excl.KMTW/Philippines |
| Парткод: | 2BS06200 |
| Деталь: | SPRING BOTTOM KMTW/Philippines |
| Парткод: | 2BR06380 |
| Деталь: | SPRING BOTTOM EARTH Excl.KMTW/Philippines |
| Парткод: | 2BS06210 |
| Деталь: | SPRING BOTTOM EARTH KMTW/Philippines |
| Парткод: | 2BR06390 |
| Деталь: | SP STOPPER BOTTOM |
| Парткод: | 2BS06150 |
| Деталь: | SPRING END |
| Парткод: | 2BS06100 |
| Деталь: | SPRING LOCK GUIDE |
| Парткод: | 2B700070 |
| Деталь: | SPRING RETARD |
| Парткод: | 2BS06090 |
| Деталь: | SPRING FEED R |
| Парткод: | 2BM22440 |
| Деталь: | SPRING FEED L |
| Парткод: | 2BS06120 |
| Деталь: | LABEL OPERATION Excl.KMTW/Philippines |
| Парткод: | 2BS06430 |
| Деталь: | LABEL OPERATION J KMTW/Philippines |
| Парткод: | 2BR06510 |
| Деталь: | SHEET FRICTION |
| Парткод: | 2BR06530 |
| Деталь: | LABEL SIZE PAPER PC-60 |
| Парткод: | 2BS06420 |
| Деталь: | RETARD ROLL ASSY |
| Парткод: | 2BR06520 |
| Деталь: | TRAY M/P ASSY FS-1920 |
| Парткод: | 2FP93100 |
| Деталь: | TRAY M/P ASSY FS-3830N |
| Парткод: | 2FR93080 |
| Деталь: | TRAY M/P ASSY FS-3820N |
| Парткод: | 2FY00010 |
| Деталь: | COVER M/P FS-1920 |
| Парткод: | 2FP06010 |
| Деталь: | COVER M/P FS-3830N |
| Парткод: | 2FR06010 |
| Деталь: | COVER M/P FS-3820N |
| Парткод: | 2FY07010 |
| Деталь: | BASE M/P |
| Парткод: | 2BS06250 |
| Деталь: | TRAY M/P MID |
| Парткод: | 2BS06240 |
| Деталь: | TRAY M/P TOP |
| Парткод: | 2BS06400 |
| Деталь: | GUIDE M/P L |
| Парткод: | 2BS06300 |
| Деталь: | GUIDE M/P R |
| Парткод: | 2BS06310 |
| Деталь: | BRACKET BOTTOM |
| Парткод: | 2BS06460 |
| Деталь: | SP BOTTOM M/P L |
| Парткод: | 2BS06180 |
| Деталь: | SP BOTTOM M/P R |
| Парткод: | 2BS06190 |
| Деталь: | SPRING LOCK M/P |
| Парткод: | 2BS06170 |
| Деталь: | SPRING SEPARATOR |
| Парткод: | 2BS06170 |
| Деталь: | GEAR MANUAL |
| Парткод: | 2BS06160 |
| Деталь: | SEPARATOR M/P ASSY |
| Парткод: | 2B700380 |
| Деталь: | BOTTOM MALTI PAD ASY |
| Парткод: | 2BR00150 |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-67 |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-67 |
| Цена: | 31 400 ₽ |
| Деталь: | ROLLER-HEAT, ML-1660,AL5052,18.1,247.5 |
| Парткод: | 5MMT888AX026 |
| Цена: | 9 400 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-67 |
| Деталь: | MEA UNIT-DEV M |
| Парткод: | DV-67 |
| Деталь: | LASER SCANNER ASSY |
| Парткод: | LK-67 |
| Цена: | 31 400 ₽ |
| Деталь: | ROLLER-HEAT, ML-1660,AL5052,18.1,247.5 |
| Парткод: | 5MMT888AX026 |
| Цена: | 9 400 ₽ |
| Деталь: | Печь, в сборе (220В) |
| Парткод: | FK-67 |
| Деталь: | FRAME M/P ASSY |
| Парткод: | 2FP68190 |
| Деталь: | FRAME M/P |
| Парткод: | 2BS02470 |
| Деталь: | ACTUATOR M/P B |
| Парткод: | 2BS02410 |
| Деталь: | SP ACTUATOR M/P B |
| Парткод: | 2BR02520 |
| Деталь: | ACTUATOR M/P A |
| Парткод: | 2BS02330 |
| Деталь: | SP ACTUATOR M/P C |
| Парткод: | 2BR02530 |
| Деталь: | ACTUATOR M/P C |
| Парткод: | 2BS02360 |
| Деталь: | HOLDER FEED M/P |
| Парткод: | 2BS02370 |
| Деталь: | LEVER CAM |
| Парткод: | 2BS02400 |
| Деталь: | SPRING CAM M/P |
| Парткод: | 2BR02450 |
| Деталь: | CAM M/P |
| Парткод: | 2BS02380 |
| Деталь: | GEAR M/P Z40 |
| Парткод: | 2BS02280 |
| Деталь: | GEAR M/P Z27 |
| Парткод: | 2BS02230 |
| Деталь: | SHAFT CLUTCH |
| Парткод: | 2FP02010 |
| Деталь: | HOLDER CLUTCH M/P |
| Парткод: | 2FP02020 |
| Деталь: | SHAFT MID B |
| Парткод: | 2BS02320 |
| Деталь: | BUSH MID M/P |
| Парткод: | 2BS02340 |
| Деталь: | SPRING MID M/P |
| Парткод: | 2BR02440 |
| Деталь: | LABEL M/P |
| Парткод: | 2FP06020 |
| Деталь: | ROLLER M/P ASSY |
| Парткод: | 2CL16130 |
| Деталь: | CLUTCH MID |
| Парткод: | 2FP27120 |
| Деталь: | ROLL MID M/P ASSY |
| Парткод: | 2CL16120 |
| Деталь: | SOLENOID M/P ASSY |
| Парткод: | WSA00050 |
| Деталь: | Ролик отделения бумаги |
| Парткод: | 302BR06521 |
| Цена: | 4 000 ₽ |
| Деталь: | Ролик захвата бумаги |
| Парткод: | 5AAVR0LL+048 |
| Цена: | 1 000 ₽ |
| Деталь: | Ролик захвата бумаги из лотка ручной подачи |
| Парткод: | 5AAVR0LL+051 |
| Цена: | 800 ₽ |
| Деталь: | Узел захвата в сборе |
| Парткод: | 5AAYA37E++35 |
| Цена: | 6 700 ₽ |
| Деталь: | Ролик отделения бумаги в держателе, в сборе |
| Парткод: | CET4322 |
| Цена: | 450 ₽ |
| Деталь: | Резина ролика отделения бумаги |
| Парткод: | CET4322PT |
| Цена: | 110 ₽ |
| Деталь: | FE-67 FEED TRANS UNIT |
| Парткод: | 2FP93050 |
| Деталь: | BASE FEED |
| Парткод: | S9000240 |
| Деталь: | SHAFT ROLL GUIDE |
| Парткод: | 2BR16200 |
| Деталь: | COVER BKT FEED |
| Парткод: | 2BS16400 |
| Деталь: | GEAR Z27H |
| Парткод: | 2FP16020 |
| Деталь: | SHAFT PICKUP |
| Парткод: | 2BR16370 |
| Деталь: | BRACKET FEED |
| Парткод: | 2BS16420 |
| Деталь: | HOLDER RELEASE |
| Парткод: | 2BS16390 |
| Деталь: | ACTUATOR PAPER |
| Парткод: | 2BS16410 |
| Деталь: | SENSOR DOC |
| Парткод: | 2BS16450 |
| Деталь: | DISCHARGER FD |
| Парткод: | 2BP21010 |
| Деталь: | PLATE EARTH MP |
| Парткод: | 2BS16190 |
| Деталь: | PLATE EARTH TC |
| Парткод: | 2BS16180 |
| Деталь: | SHAFT RELEASE |
| Парткод: | 2BS16470 |
| Деталь: | GUIDE PAPER |
| Парткод: | 2BS16480 |
| Деталь: | SHEET GUIDE FLAPPER |
| Парткод: | 2FP20170 |
| Деталь: | BUSH POM A |
| Парткод: | 2B716270 |
| Деталь: | ROLLER REGIST LOW |
| Парткод: | 2BR16220 |
| Деталь: | GEAR REG Z22S-Z32S |
| Парткод: | 2BS16270 |
| Деталь: | BUSH REGIST |
| Парткод: | 2BS16290 |
| Деталь: | ROLLER REGIST UP |
| Парткод: | 2BR16210 |
| Деталь: | SPRING REGIST L |
| Парткод: | 2BR16230 |
| Деталь: | SPRING REGIST R |
| Парткод: | 2BR16240 |
| Деталь: | GEAR REGIST Z19S |
| Парткод: | 2BS16240 |
| Деталь: | PLATE GUIDE CHUTE |
| Парткод: | 2BS16200 |
| Деталь: | PAPER CHUTE |
| Парткод: | 2BS16460 |
| Деталь: | SPRING TRANS L |
| Парткод: | 2B716140 |
| Деталь: | BUSH TRANSFER |
| Парткод: | 2BS16380 |
| Деталь: | SPRING TRANS R |
| Парткод: | 2BR16280 |
| Деталь: | LEVER LOCK |
| Парткод: | 2BS16430 |
| Деталь: | BUSH FEED |
| Парткод: | 2BS16300 |
| Деталь: | GEAR JOINT Z26S |
| Парткод: | 2D916230 |
| Деталь: | GEAR IDLE Z23S |
| Парткод: | 2BS16260 |
| Деталь: | SHAFT LOCKR |
| Парткод: | 2BS16440 |
| Деталь: | ROLLER GUIDE ASSY |
| Парткод: | 2CL16110 |
| Деталь: | HOLDER FEED ASSY |
| Парткод: | 2BR68470 |
| Деталь: | GEAR PICK ASSY |
| Парткод: | 2FP16010 |
| Деталь: | ROLLER FEED ASSY |
| Парткод: | 2FP16050 |
| Цена: | 1 000 ₽ |
| Деталь: | ROLLER PICKUP ASSY |
| Парткод: | 2CL16100 |
| Деталь: | SPRING LOCK R |
| Парткод: | 2BR16250 |
| Деталь: | ROLLER TRANSFER ASSY |
| Парткод: | 2BS68320 |
| Деталь: | DISCHARGER ASSY |
| Парткод: | 2BR68480 |
Коды ошибок
0100
0150
0420
0440
0460
0550
0560
0570
0580
1200
2000
2600
2610
2620
2630
4000
4200
5300
6000
6020
6030
6400
7001
7350
7400
7410
8000
F0
F010
F020
F040
F070
Описание
| Error code: | 0100 |
| Display: | MAINTENANCE CALL 0100 |
| Description: | Backup memory device error |
| Causes: | Defective flash memory. Defective main PWB. |
| Remedy: | EEPROM (main PWB) 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Check that the EEPROM on the main circuit PWB is peroperly installed on the main circuit PWB and, if not, re-install it. 3. Replace the main PWB |
| Error code: | 0150 |
| Description: | Even though the machine carries out the regular movement, the output of Slider Sensor does not reach the expected value. |
| Causes: | Slider Motor has a problem. Slider Sensor has a problem. Wiring or Flexible Cable has short circuitted or cut-line. Servo Board has a problem. |
| Remedy: | Check Cable connection of Servo Board Check Cable connection of Junction Board Slider Motor replacement Slider Sensor replacement Wiring or Flexible Cable replacement Servo Board replacement |
| Error code: | 0420 |
| Description: | Paper feeder communication error Communication error between control PWB and optional paper feeder. |
| Causes: | Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF main-PWB. |
| Remedy: | Improper installation paper feeder. Follow installation instruction carefully again. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Defective control PWB. Replace the control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Defective PF main- PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 0440 |
| Description: | Communication error between printer and document finisher/ mailbox sorter • The CPU (U2) of engine controller PWB (KP-992) does not communicate with the DF-31 document finisher/SO-30 mailbox sorter normally. • The ASIC (U8) of engine controller PWB (KP-992) does not communicate to the DF-31 document finisher/SO-30 mailbox sorter normally. |
| Causes: | Defective engine controller PWB (KP-992). Defective main PWB of DF-31 document finisher/SO-30 mailbox sorter. Defective paper feeder/options relay PWB (KP-995). Defective signal cable between printer and DF-31 document finisher/ SO-30 mailbox sorter. Defective harness (2CK2719) between engine controller PWB (KP-992) and paper feeder/options relay PWB (KP- 995), or poor contact of the connector terminals. Defective document finisher interface PWB. Defective harness (2CK2727) between document finisher interface PWB and engine controller PWB (KP- 992), or poor contact of the connector terminals. |
| Remedy: | Replace the engine controller PWB (KP- 992). Replace the main PWB of DF-31 document finisher/SO-30 mailbox sorter. See DF-31 document finisher/SO-30 mailbox sorter’s service manual. Replace the paper feeder/options relay PWB (KP-995). Replace the signal cable between printer and DF-31 document finisher/SO-30 mailbox sorter. Check the continuity of the harness (2CK2719). Check the insertion of connectors. Replace the document finisher interface PWB. Check the continuity of the harness (2CK2727). Check the insertion of connectors. |
| Error code: | 0460 |
| Description: | Communication error between printer and duplex unit • The CPU (U2) of engine controller PWB (KP-992) does not communicate with the PD-800 duplex unit normally. |
| Causes: | Defective engine controller PWB (KP-992). Defective main board of PD-800 duplex unit. Defective paper feeder/options relay PWB (KP- 995). Defective connection printer and PD-800 duplex unit. Defective harness (2CK2719) between engine controller PWB (KP-992) and paper feeder/ options relay PWB (KP-995), or poor contact of the connector terminals. |
| Remedy: | Replace the engine controller PWB (KP- 992). Replace the main board of duplex unit PD- 30. See PD-800 duplex unit’s service manual. Replace the paper feeder/options relay PWB (KP-995). Reinstall PD-800 duplex unit. Check the continuity of the harness (2CK2719). Check the insertion of connectors. |
| Error code: | 0550 |
| Description: | Non-supported duplexer is installed Non-supported duplexer DU-60 is installede |
| Causes: | DU-60 is installed. |
| Error code: | 0560 |
| Description: | Paper feeder PF-60 [top] with wrong firmware version is installed The code that identifies the firmware version was out of range. |
| Causes: | Wrong firmware version is used on the main board in paper feeder PF-60. |
| Error code: | 0570 |
| Description: | Paper feeder PF-60 [middle] with wrong firmware version is installed The code that identifies the firmware version was out of range. Bulk paper feeder PF-8E with wrong firmware version is installed ·The code that identifies the firmware version was out of range. |
| Causes: | Wrong firmware version is used on the main board in paper feeder PF-60 or bulk paper feeder PF-8E. |
| Error code: | 0580 |
| Description: | Paper feeder PF-60 [bottom] with wrong firmware version is installed The code that identifies the firmware version was out of range. |
| Causes: | Wrong firmware version is used on the main board in paper feeder PF-60. |
| Error code: | 1200 |
| Description: | Side registration motor error The duplexer PWB of the optional duplexer cannot detect the home position of the adjust guide. |
| Causes: | Defective duplexer. Defective engine controller PWB (A0004). |
| Remedy: | Defective duplexer. Refer to the duplexer`s service manual. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). |
| Error code: | 2000 |
| Description: | DDA Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 2600 |
| Description: | PF paper feed motor error (large capacity feeder) After PF paper feed motor is driven, the ready signal does not turn to L within 2 s. |
| Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective PF paper feed motor. Defective PF main PWB. |
| Remedy: | PF paper feed motor 1. To check the feed unit operation, execute U247 LCF- Motor ON. 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF paper feed motor and PF main PWB (YC16) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the paper feed motor. PF main PWB Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 2610 |
| Description: | PF paper feed motor error (paper feeder) After PF paper feed motor is driven, the ready signal does not turn to L within 2 s. |
| Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective PF paper feed motor. Defective PF main PWB. |
| Remedy: | PF paper feed motor 1. To check the feed unit operation, execute U247 2PF - Motor ON. 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF paper feed motor and PF main PWB (YC16) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the paper feed motor. PF main PWB Replace the PF main PWB (Refer to the service manual for the paper feeder). |
| Error code: | 2620 |
| Description: | PF drive motor 3 error (PF3) During the motor drive, the stable signal is not turned on for continuous 5 s. |
| Remedy: | Defective connector cable or poor contact in the connector 1. Reinsert the connector. 2. Check continuity within the connector wire. If none, replace the wire. PF drive motor 3 and PF main PWB (YC6) Drive transmission system for the PF drive motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Replace the gears, if damaged. PF drive motor Replace the PF drive motor 3. PF main PWB Replace the PF main PWB. |
| Error code: | 2630 |
| Description: | Paper feed motor error (bottom) The notification that was received, the motor clock sensor cannot detect the revolution of the paper feed motor of the optional paper feeder (third). |
| Causes: | Defective paper feeder. Defective engine controller PWB (A0004). |
| Remedy: | Defective paper feeder. Refer to the paper feeder`s service manual. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). |
| Error code: | 4000 |
| Display: | Supplies Drum End Soon. |
| Description: | Command Communication Error. |
| Causes: | The communication error occurs when the IC4 or IC22 on the Main Board is broken. And it causes the Motor Error. |
| Remedy: | Replace the Main Board. |
| Error code: | 4200 |
| Display: | Supplies Replace Drum |
| Description: | BD steady-state error The BD signal is not detected. |
| Causes: | APC PWB (LSU). Main/Engine PWB. |
| Remedy: | APC PWB (LSU) 1. Confirm that the FCC wiring connector is not distorted and connect the FCC wiring all the way in. Laser scanner unit and main/engine PWB (YC2010) 2. If the FCC wiring is disconnected, shorted or grounded, replace the FCC wiring. 3. Replace the laser scanner unit. Main/Engine PWB 1. Check the main/engine software and upgrade to the latest, if necessary. 2. Replace the main/engine PWB. |
| Error code: | 5300 |
| Description: | Eraser lamp broken detection • The current at the correct level is not detected when ASIC (U8) on the engine controller PWB (KP-992) generates the signal to activate the eraser lamp. |
| Causes: | Defective engine controller PWB (KP-992). Defective drum unit (eraser lamp or drum PWB [KP- 813]). Defective harness (2BM2864) between engine controller PWB (KP-992) and drum unit, or poor contact of the connector terminals. |
| Remedy: | Replace the engine controller PWB (KP- 992). Replace the drum unit. Check the continuity of the harness (2BM2864). Check the insertion of connectors. |
| Error code: | 6000 |
| Description: | Broken fuser heater wire Fuser thermistor 1 does not reach 100° C/212 °F even after 30 s during warming up. The detected temperature of fuser thermistor 1 does not reach the specified temperature (ready indication temperature) for 420 s in warming up after reached to 100° C/212 °F. |
| Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
| Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Power source PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Power source PWB (YC3) and fuser heater PWB (YC3) Fuser heater PWB (YC2) and feed PWB 1 (YC27) Feed PWB 1 (YC1) and Engine PWB (YC6) Fuser heater 1. Replace the fuser unit. |
| Error code: | 6020 |
| Description: | Abnormally high fuser thermistor 1 temperature Fuser thermistor 1 detects a temperature higher than 240°C/464°F for 1 s. |
| Causes: | Deformed connector pin. Defective triac. Shorted fuser thermistor 1. Defective engine PWB. |
| Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 6030 |
| Description: | Broken fuser thermistor 1 wire Input from fuser center thermistor 1 is 1010 or more (A/D value) continuously for 1 s. Verify if A/D read in the differential output won’t change by 4 or more when it was turned on for 10 seconds in a lowtemperature environment. |
| Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 1 wire. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
| Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Fuser thermistor 1 1. Replace the Fuser unit. Fuser thermostat (triggered) 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and fuser heater PWB (YC1) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. |
| Error code: | 6400 |
| Display: | No Belt Unit Open the Front Cover, pull out all Drum Units completely and install the Belt Unit. |
| Description: | Zero-cross signal error While fuser heater ON/OFF control is performed, the zerocross signal is not input within 3 s. |
| Causes: | Fuser unit. |
| Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser heater PWB (YC2) and feed PWB 1 (YC27) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the fuser heater PWB. |
| Error code: | 7001 |
| Description: | Toner motor error During the toner motor is driven, an event in which a locking was detected for 5 times in 200 ms intervals has occurred in 30 sets. |
| Causes: | Defective connector cable or poor contact in the connector. Defective toner motor. Defective engine PWB. |
| Remedy: | Toner container 1. Check that the spiral screw of the toner container can be rotated by the hand. 2. Check for broken gears and replace if any. Toner motor 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor. Screw sensor 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Screw sensor and Front PWB (YC5) Front PWB (YC2) and Engine PWB (YC7) 3. Replace the Screw sensor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
| Error code: | 7350 |
| Description: | Toner refreshing mode error |
| Causes: | Defective high voltage unit. Defective toner refreshing. |
| Error code: | 7400 |
| Display: | Jam Tray 2 Pull the paper tray2 completely out of the machine and remove the jammed paper. |
| Description: | Developing unit connector insertion problem Absence of the developing unit is detected. |
| Causes: | Developing unit connector inserted incorrectly. Defective developing unit connector. |
| Remedy: | Developing unit connector inserted incorrectly. Reinsert the developing unit connector if necessary. Defective developing unit connector. Replace the developing unit. |
| Error code: | 7410 |
| Description: | Drum unit connector insertion problem Absence of the drum unit is detected.c |
| Causes: | Drum unit connector inserted incorrectly. Defective drum unit connector. |
| Remedy: | Drum unit connector inserted incorrectly. Reinsert the drum unit connector if necessary. Defective drum unit connector. Replace the drum unit. |
| Error code: | 8000 |
| Display: | Print Overrun |
| Description: | Finisher incompatible detection error The finisher has been installed with a device to which it is incompatible. |
| Causes: | The finisher is installed with a device to which it is incompatible. |
| Remedy: | The finisher is installed with a device to which it is incompatible. The finisher must be installed with the devices to which it is compatible. |
| Error code: | F0 |
| Display: | SVC F0 ERROR |
| Description: | The communication ended because of a WDT due to an overrun of the software. |
| Causes: | Defective main controller PWB. Defective operator panel PWB. Defective mainengine controllers relay PWB. Defective engine controller PWB . Defective harness between engine controller PWB and operator panel PWB, or poor contact of the connector terminals. |
| Remedy: | Attempt the communication again. If the error occurs frequently, perform a memory clear (except user area.) |
| Error code: | F010 |
| Description: | Program read error (SSD) |
| Causes: | The garbled 2bit data was detected during the program read from the flash memory. |
| Remedy: | 1 (When the service call error appears after replacing the SSD) Replacing the SSD along the correct procedures The firmware is not stored in the SSD. Insert the USB memory device containing all released firmware into the main unit, and turn the main power on. Firmware Update 2 Checking the SSD (if lit after replacing the SSD) An SSD out of specification is installed. Install the SSD matching the memory capacity specification. 3 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 4 Checking the SSD The SSD is not properly attached. Check if the SSD terminal is not faulty and clean it. Then, reinstall the SSD. 5 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 6 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 7 Replacing the SSD The SSD is faulty. Backup the data in the SSD at U026. Then, replace the SSD and turn the main power on while installing the USB memory storing the firmware for the affected model n the main unit. 8 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
| Error code: | F020 |
| Description: | System memory error (RAM reading/writing error or CPU memory error) |
| Causes: | The error appears during the reading/writing check of the RAM for the CPU when the main unit starts up. |
| Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 3 Checking the main PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the main PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the main PWB. |
| Error code: | F040 |
| Description: | Option installation error |
| Causes: | The size of the attached main memory is 2 GB when the DSDF is installed. |
| Remedy: | Main memory Replace the main memory with a 4 GB one. DSDF • Remove the DSDF. • Replace the DSDF with an RADF. |
| Error code: | F070 |
| Description: | Communication error between System-CPU and Engine-CPU |
| Causes: | Switching regulator • Replace the fuse (F210). • Replace the switching regulator. LGC board SYS board If the problem is not corrected with the replacement of the LGC board, reinstall the removed LGC board and replace the SYS board. IMG board If the problem is still not corrected with the replacement of the SYS board, reinstall the removed SYS board and replace the IMG board. |
| Remedy: | (1) Check if the connector CN104 on the SYS board and CN130, CN131, CN134 on the SYSIF board is disconnected. (2) Check if the connector CN10 on the SLG board is disconnected. (3) Check if the harness connecting the SYSIF board and SLG board is disconnected or open circuited. (4) Check if the harness connecting the SYSIF board and LGC board is disconnected or open circuited. (5) Check if the connection of the SYS board (CN104) and SYSIF board (CN130) is open circuited. (6) If the SYS board has been replaced, check if the jumper pin setting on the SYS board is correct. (The jumper pin should be inserted between pin 2 and 3 of CN103 and CN115.) (7) Check the version of the system ROM on the SYS board. (8) Check the version of the engine ROM version on the LGC board. (9) Check the version of the scanner ROM version on the SLG board. (10) Replace the SYS board. (11) Replace the SLG board. (12) Replace the LGC board. (13) Replace the SYSIF board. |
