Kyocera FS-9500

Рейтинг

Снят с производства

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

300000

Скорость печати A4

Цветность печати

черно-белая

Общие характеристики
Печать фотографий
Сканер
Копир
Цветность печати
Технология печати	лазерная
Тип	лазерный/светодиодный
Тип устройства	Принтер
Макс. формат	A3
Область применения	большой офис
Число страниц в месяц	300 000
Принтер
Прямая печать
Двусторонняя печать
Макс, разрешение для ч/б печати
По X	1 200
По Y	1 200
Скорость ч/б печати
A4	50
Сканер
Стандарт TWAIN
Стандарт WIA
Отправка изображения по e-mail
Расходные материалы
Ресурс ч/б картриджа/тонера	40 000
Печать на:
Фотобумаге
Пленках
Этикетках
Языки управления
PostScript
Лотки
Подача бумаги
Стандартная	500
Вывод бумаги
Стандартный	200
Интерфейсы
Инфракрасный порт
USB
Ethernet (RJ-45)
LPT
Память/Процессор
Макс, объем памяти	281,25
Объем памяти	31,25
Дополнительная информация
Поддержка ОС
Linux
DOS
Mac OS
Windows
Уровень шума
При работе	31
Габариты
Высота	639
Вес	67
Ширина	615
Глубина	615

Коды ошибок

0110

0210

0420

0440

0470

1010

1020

1030

1040

1100

1110

1120

1130

1160

1170

2000

2500

2600

4000

4010

4200

5300

6000

6020

6050

6410

6420

7400

7410

7800

7810

8010

8030

8140

8170

8180

8190

8210

8220

8300

8310

8320

8330

8340

8350

8360

8370

8380

8390

8400

8410

8420

8430

8440

8450

8460

8470

8480

F010

F020

F030

F040

F080

Описание

Парткод

Название

Kyocera Блок фотобарабана

Kyocera Блок проявки

Kyocera Узел термозакрепления 230v

Kyocera Сервисный комплект

Kyocera Тонер-картридж черный

Error code:	0110
Description:	Input value from Linear Encoder is not changed by the Linear Encoder origin setup. When Motor stops during printing, expected movement is not completed on some head.
Causes:	Read error of Linear Encoder. Read error of Encoder on Scan Motor side. Belt is not fixed to Head Carriage firmly.
Remedy:	Confirm whether Encoder Scale is between the slit of Encoder Module in a whole width of the machine. Check cable connection between Linear Encoder Board and Head Board Confirm connection between Belt and Carriage Linear Encoder replacement Scan Motor replacement Servo Board replacement Main Board replacement

Error code:	0210
Description:	The UV Lamp is not connected / tuned on.
Causes:	There is a bad connection between UV Lamp and Print Carriage Board. There is a bad connection between DC Junction Board and Signal junction Board. Print Carrtiage Board is broken. DC Junction Board is broken. Signal Junction Board is broken. The UV Lamp is broken.
Remedy:	Check cable connection between UV Lamp and Print Carriage Board. Check cable connection between DC Junction Board and Signal Junction Board. Print Carriage Board replacement DC Junction Board replacement Signal Junction Board replacement UV Lamp replacement

Error code:	0420
Description:	Paper feeder communication error Communication error between control PWB and optional paper feeder.
Causes:	Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF main-PWB.
Remedy:	Improper installation paper feeder. Follow installation instruction carefully again. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Defective control PWB. Replace the control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Defective PF main- PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder).

Error code:	0440
Description:	Communication error between printer and document finisher/ mailbox sorter • The CPU (U2) of engine controller PWB (KP-992) does not communicate with the DF-31 document finisher/SO-30 mailbox sorter normally. • The ASIC (U8) of engine controller PWB (KP-992) does not communicate to the DF-31 document finisher/SO-30 mailbox sorter normally.
Causes:	Defective engine controller PWB (KP-992). Defective main PWB of DF-31 document finisher/SO-30 mailbox sorter. Defective paper feeder/options relay PWB (KP-995). Defective signal cable between printer and DF-31 document finisher/ SO-30 mailbox sorter. Defective harness (2CK2719) between engine controller PWB (KP-992) and paper feeder/options relay PWB (KP- 995), or poor contact of the connector terminals. Defective document finisher interface PWB. Defective harness (2CK2727) between document finisher interface PWB and engine controller PWB (KP- 992), or poor contact of the connector terminals.
Remedy:	Replace the engine controller PWB (KP- 992). Replace the main PWB of DF-31 document finisher/SO-30 mailbox sorter. See DF-31 document finisher/SO-30 mailbox sorter’s service manual. Replace the paper feeder/options relay PWB (KP-995). Replace the signal cable between printer and DF-31 document finisher/SO-30 mailbox sorter. Check the continuity of the harness (2CK2719). Check the insertion of connectors. Replace the document finisher interface PWB. Check the continuity of the harness (2CK2727). Check the insertion of connectors.

Error code:	0470
Description:	Switchback unit communication problem • Communication errors from the communication microcomputer on the engine controller PWB. No communication: there is no reply after 5 retries. Abnormal communication: a communication error (parity or checksum error) is detected five times in succession.
Causes:	Poor contact in the connector terminals. Defective engine controller PWB. Defective switchback unit main board.
Remedy:	Check the connection of connectors YC3 on the engine controller PWB and the continuity across the connector terminals. Repair or replace if necessary. Replace the engine controller PWB and check for correct operation. Replace the switchback unit main board and check for correct operation.

Error code:	1010
Display:	Problem with Printhead L/R Chk printing results
Description:	Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s. This error is detected 4 times successively.
Causes:	Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective lift motor 1. Defective engine PWB.
Remedy:	Cassette lift base elevating mechanism Check that the cassette base can be manipulated smoothly, if not, repair or replace. Lift motor 1 1. Check that the cassette base has been ascended. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift motor 1 and Feed PWB 2 (YC3) Feed PWB 2 (YC1) and Engine PWB (YC4) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the lift motor 1. Lift sensor 1 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift sensor 1 and Feed PWB 2 (YC8) Feed PWB 2 (YC1) and Engine PWB (YC4) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the lift sensor1. Feed PWB 2 Replace the Feed PWB 2. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB.

Error code:	F0
Display:	SVC F0 ERROR
Description:	The communication ended because of a WDT due to an overrun of the software.
Causes:	Defective main controller PWB. Defective operator panel PWB. Defective mainengine controllers relay PWB. Defective engine controller PWB . Defective harness between engine controller PWB and operator panel PWB, or poor contact of the connector terminals.
Remedy:	Attempt the communication again. If the error occurs frequently, perform a memory clear (except user area.)

Error code:	1160
Description:	Paper feeder PF-70*/PF-75 sequence problem
Causes:	Operation start request is sent from the printer to the paper feeder PF-70/PF-75 while paper feed is disabled. Paper feed request is sent from the printer to the paper feeder PF- 70/PF-75 before operation start request.
Remedy:	Turn the power off and back on (reset request is sent from the printer to the paper feeder PF-70/PF-75 to cancel operation start request). Turn the power off and back on (reset request is sent from the printer to the paper feeder PF-70/PF-75 to cancel operation start request).

Kyocera FS-9500

Общие характеристики

Печать фотографий

Сканер

Копир

Цветность печати

Технология печати

Тип

Тип устройства

Макс. формат

Область применения

Число страниц в месяц

Принтер

Прямая печать

Двусторонняя печать

Макс, разрешение для ч/б печати

Скорость ч/б печати

Сканер

Стандарт TWAIN

Стандарт WIA

Отправка изображения по e-mail

Расходные материалы

Ресурс ч/б картриджа/тонера

Печать на:

Языки управления

Лотки

Подача бумаги

Вывод бумаги

Интерфейсы

Инфракрасный порт

USB

Ethernet (RJ-45)

LPT

Память/Процессор

Макс, объем памяти

Объем памяти

Дополнительная информация

Поддержка ОС

Уровень шума

Габариты

Высота

Вес

Ширина

Глубина

Коды ошибок

Описание

Парткод

Название

Позвонить

Написать

Спасибо за ваше сообщение!

Оставить заявку