Kyocera FS-C5020N
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
85000
Цветность печати
цветная
Общие характеристики |
|
---|---|
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Область применения |
средний офис |
Число страниц в месяц |
85 000 |
Копир |
|
Сканер |
|
Тип устройства |
Принтер |
Печать фотографий |
|
Размещение |
настольный |
Факс |
|
Телефон |
|
Цветность печати |
цветная |
Макс. формат |
A4 |
Принтер |
|
Время разогрева |
60 |
Количество цветов |
4 |
Прямая печать |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
По Y | 600 |
По X | 600 |
Время выхода первого отпечатка |
|
Цветн, | 16 |
Ч/б | 16 |
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
8 000 |
Ресурс цветного картриджа/тонера |
8 000 |
Печать на: |
|
Этикетках | |
Матовой бумаге | |
Конвертах | |
Глянцевой бумаге | |
Карточках | |
Пленках | |
Рулоне | |
Фотобумаге | |
CD/DVD | |
Плотность бумаги |
|
Минимальная | 60 |
Максимальная | 200 |
Телефон |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Стандарт DECT |
|
Спикерфон |
|
Автоответчик |
|
Caller ID |
|
Шрифты и языки управления |
|
Языки управления |
|
PCL 5c | |
PCL 6 | |
PostScript | |
PostScript 3 | |
PPDS | |
PCL 5e | |
PostScript 2 | |
Количество установленных шрифтов |
|
PCL | 80 |
Лотки |
|
Подача бумаги |
|
Максимальная | 2 100 |
Стандартная | 600 |
Вывод бумаги |
|
Стандартный | 250 |
Финишер |
|
Сортер |
|
Сортировка со сдвигом |
|
Степлер |
|
Брошюровщик |
|
Электронная сортировка |
|
Интерфейсы |
|
Версия USB |
2,0 |
Количество свободных слотов расширения |
1 |
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
RS-232 |
|
Инфракрасный порт |
|
Bluetooth |
|
Wi-Fi |
|
Ethernet (RJ-45) |
|
USB |
|
LPT |
|
Память/Процессор |
|
Объем памяти |
128 |
Частота процессора |
400 |
Макс, объем памяти |
1 024 |
Процессор |
PowerPC 750СХ r |
Дополнительная информация |
|
Экран |
|
Мин. системные требования |
Intel Pentium II |
Поддержка ОС |
|
Mac OS | |
Windows | |
Linux | |
DOS | |
Габариты |
|
Глубина |
470 |
Ширина |
345 |
Вес |
22 |
Высота |
385 |
Модули
Fuser Unit (24 PPM)
Frame MP Assembly
PAPER FEED UNIT
Primary Transfer Unit
Upper Frame Unit
Fuser Unit (16 PPM)
Developer unit
Controller Box
Drive Units
MP TRAY
Drum Unit, LED Unit
PAPER CASSETTE
CASSETTE ASSEMBLY
PAPER FEED
FRAME L
Exterior Covers
Детали
Деталь: | FK-520(E) FUSER UNIT |
Парткод: | 302F493010 |
Деталь: | FK-520(U) FUSER UNIT |
Парткод: | 302F493020 |
Деталь: | THERMISTOR ASSY |
Парткод: | 2D927090 |
Деталь: | Ring Stop |
Парткод: | 5MMW171LD007 |
Деталь: | GEAR JOINT Z36 |
Парткод: | 302F325040 |
Деталь: | NUT FUSER A |
Парткод: | 5MMS111SL002 |
Деталь: | COVER FUSER UP |
Парткод: | 302F425120 |
Деталь: | CONN.CORD ASSY HEATER-DRAWER |
Парткод: | 302F446010 |
Деталь: | GEAR HEAT Z43S |
Парткод: | 302F425440 |
Деталь: | ACTUATOR SOL |
Парткод: | 302D920012 |
Деталь: | STUD SCREW M3 |
Парткод: | 302F325010 |
Деталь: | COVER FUSER L |
Парткод: | 302F425141 |
Деталь: | BUSH FUSER |
Парткод: | 302F425450 |
Деталь: | SPRING PIN |
Парткод: | 5MBP2518WXSP |
Деталь: | RUBBER PIN |
Парткод: | 5MVM111RB002 |
Деталь: | SOLENOID /TDS-KN07A-21F |
Парткод: | 5FZSA2401020309 |
Деталь: | SPRING SOL |
Парткод: | 5MMW261LJ032 |
Деталь: | THERMOSTAT 250V150 C/CS-7SA 6A |
Парткод: | YF0A1530 |
Деталь: | PLATE PITCH |
Парткод: | 302F425100 |
Деталь: | HOLDER BELT L |
Парткод: | 302F425193 |
Деталь: | HOLDER BELT R |
Парткод: | 302F425203 |
Деталь: | ROLLER BELT ASSY |
Парткод: | 302F400390 |
Деталь: | ROLLER BELT |
Парткод: | 302F425290 |
Деталь: | FUSER BELT BEARING |
Парткод: | 7BE686ZZ++++H01 |
Деталь: | FUSER BEARING /6804ZZNR M/20D |
Парткод: | 5MBE6804ZZNR |
Деталь: | GEAR EXIT Z18S |
Парткод: | 302F425361 |
Деталь: | ROLLER EXIT |
Парткод: | 302F425330 |
Деталь: | LABEL EXIT |
Парткод: | 302F325030 |
Деталь: | BUSH FD |
Парткод: | 5MVM266DN006 |
Деталь: | GEAR IDLE Z15S-Z18S |
Парткод: | 302F425350 |
Деталь: | PULLEY EXIT |
Парткод: | 302F325070 |
Деталь: | GUIDE EXIT |
Парткод: | 302F425161 |
Деталь: | ACTUATOR FUSER |
Парткод: | 302F425212 |
Деталь: | SPRING EXIT L |
Парткод: | 302F425230 |
Деталь: | SPRING EXIT R |
Парткод: | 302F425240 |
Деталь: | SPRING PULLEY EXIT |
Парткод: | 302F425250 |
Деталь: | SPRING ACTUATOR |
Парткод: | 302F425260 |
Деталь: | SHAFT EXIT |
Парткод: | 302F425370 |
Деталь: | GUIDE CHANGE |
Парткод: | 302F425341 |
Деталь: | PLATE FUSER L |
Парткод: | 302F425012 |
Деталь: | PLATE FUSER R |
Парткод: | 302F425021 |
Деталь: | STAY FUSER A |
Парткод: | 302F425030 |
Деталь: | STAY FUSER B |
Парткод: | 302F425040 |
Деталь: | STAY FUSER C |
Парткод: | 302F425050 |
Деталь: | PLATE PRESS L |
Парткод: | 302F425060 |
Деталь: | PLATE PRESS R |
Парткод: | 302F425070 |
Деталь: | PLATE RELEASE L |
Парткод: | 302F425080 |
Деталь: | PLATE RELEASE R |
Парткод: | 302F425090 |
Деталь: | PLATE SEPARATOR |
Парткод: | 302F425110 |
Деталь: | PULLEY PRESS |
Парткод: | 302F425130 |
Деталь: | COVER FUSER R |
Парткод: | 302F425151 |
Деталь: | GUIDE EXIT UP |
Парткод: | 302F425171 |
Деталь: | GUIDE ENTRANCE |
Парткод: | 302F425180 |
Деталь: | SPRING PRESS |
Парткод: | 302F425220 |
Деталь: | ROLLER HEAT |
Парткод: | 302F425281 |
Деталь: | LAMP HEATER 120V |
Парткод: | 302F425311 |
Деталь: | LAMP HEATER 240V |
Парткод: | 302F425301 |
Деталь: | P.W.B. ASSY FUSER |
Парткод: | 302F401280 |
Деталь: | ROLLER BELT A |
Парткод: | 302F425430 |
Деталь: | SPRING CHANGE |
Парткод: | 302F425470 |
Деталь: | SLEEVE FUSER GEAR |
Парткод: | 302F425390 |
Деталь: | SEAL LUMP HOLD R |
Парткод: | 302F425400 |
Деталь: | SEAL LUMP HOLD L |
Парткод: | 302F425410 |
Деталь: | SEAL COVER FUSER |
Парткод: | 302F425420 |
Деталь: | SPRING SLEEVE |
Парткод: | 302F425460 |
Деталь: | Ring Stop |
Парткод: | 302F425480 |
Деталь: | FRAME MP ASSY |
Парткод: | 2D968390 |
Деталь: | FRAME M/P |
Парткод: | 5MVX866CH011 |
Деталь: | SPRING MID M/P |
Парткод: | 5MMW601SD001 |
Деталь: | BUSH MID M/P |
Парткод: | 5MVX321DN014 |
Деталь: | ROLL MID M/P ASSY |
Парткод: | 5AAVR0LL+050 |
Деталь: | SHAFT MID B |
Парткод: | 5MVT676CB003 |
Деталь: | SOLENOID M/P ASSY |
Парткод: | WSAA0160 |
Деталь: | GEAR M/P Z27 |
Парткод: | 5MVG133DN008 |
Деталь: | GEAR MID Z42S |
Парткод: | 5MVG158XN005 |
Деталь: | HOLDER CLUTCH M/P |
Парткод: | 5MVX662DN003 |
Деталь: | GEAR M/P Z40 |
Парткод: | 5MVG148DN063 |
Деталь: | LEVER CAM |
Парткод: | 302F331080 |
Деталь: | ROLLER M/P ASSY |
Парткод: | 5AAVR0LL+051 |
Цена: | 800 ₽ |
Деталь: | SPRING CAM M/P |
Парткод: | 5MMW161LD043 |
Деталь: | CAM M/P |
Парткод: | 5MVX433DN002 |
Деталь: | ACTUATOR M/P C |
Парткод: | 5MVX421SB021 |
Деталь: | SP ACTUATOR M/P C |
Парткод: | 5MMW161SD009 |
Деталь: | HOLDER FEED M/P |
Парткод: | 5MVX422DN007 |
Деталь: | ACTUATOR M/P A |
Парткод: | 5MVT754SB001 |
Деталь: | ACTUATOR M/P B |
Парткод: | 5MVX621SB010 |
Деталь: | SP ACTUATOR M/P B |
Парткод: | 5MMW161SD010 |
Деталь: | FEED TRANS UNIT |
Парткод: | 302F300290 |
Деталь: | SPRING REGIST R |
Парткод: | 5MMW341LD008 |
Деталь: | BUSH REGIST |
Парткод: | 5MVM221DB002 |
Деталь: | GEAR REGIST Z19S |
Парткод: | 5MVG126DN015 |
Деталь: | SPRING REGIST L |
Парткод: | 5MMW341LD011 |
Деталь: | ROLLER REGIST LOW |
Парткод: | 302F324020 |
Деталь: | BUSH POM A |
Парткод: | 5MVM176DN019 |
Деталь: | SPRING EARTH B |
Парткод: | 5MMW641SD001 |
Деталь: | PLATE EARTH TC |
Парткод: | 5MMX543LD006 |
Деталь: | M.GLAZE R. 100M 1W |
Парткод: | 5FRHA3A10702+01 |
Деталь: | SPRING TRANS R |
Парткод: | 5MMW241SX005 |
Деталь: | PLATE EARTH MP |
Парткод: | 5MMX422LD012 |
Деталь: | SPRING ACTUATOR REG |
Парткод: | 5MMW161SD014 |
Деталь: | SENSOR DOC |
Парткод: | 302F324040 |
Деталь: | PLATE EARTH FEED |
Парткод: | 5MMX543LD007 |
Деталь: | ACTUATOR PAPER |
Парткод: | 5MVX663SB013 |
Деталь: | GEAR REG Z22S-Z32S |
Парткод: | 5MVG148DN060 |
Деталь: | GEAR IDLE Z23S |
Парткод: | 302D916221 |
Деталь: | HOOK RELEASE |
Парткод: | 5MVX733DN002 |
Деталь: | SPRING LOCK R |
Парткод: | 5MMW251SD002 |
Деталь: | LEVER LOCK |
Парткод: | 2BS16431 |
Деталь: | BUSH FEED |
Парткод: | 5MVM222XN001 |
Деталь: | ROLLER GUIDE ASSY |
Парткод: | 302FP06100 |
Деталь: | SHAFT RELEASE |
Парткод: | 5MVX843CB004 |
Деталь: | GEAR JOINT Z26S |
Парткод: | 5MVG038DN002 |
Деталь: | SHAFT ROLL GUIDE |
Парткод: | 302F324030 |
Деталь: | SPRING EARTH C |
Парткод: | 5MMW641SD002 |
Деталь: | CONN. CORD ASSY S02988 |
Парткод: | 5AACCNSU6GEA++P |
Деталь: | WIRE EARTH M/P |
Парткод: | 5MMW641SD003 |
Деталь: | HOLDER FEED ASSY |
Парткод: | 5AAYA37E++35 |
Цена: | 6 700 ₽ |
Деталь: | COVER BKT FEED |
Парткод: | 5MVX642DH001 |
Деталь: | BASE FEED |
Парткод: | 302D916051 |
Деталь: | GEAR PICKUP |
Парткод: | 5AAVGEAR+037 |
Деталь: | GUIDE PAPER |
Парткод: | 302D916071 |
Деталь: | ROLLER FEED ASSY |
Парткод: | 5AAVR0LL+047 |
Цена: | 1 000 ₽ |
Деталь: | SHEET REGIST |
Парткод: | 5MVS721KF005 |
Деталь: | SHAFT PICKUP |
Парткод: | 5MMT664SN002 |
Деталь: | PAPER CHUTE |
Парткод: | 302D916081 |
Деталь: | GEAR FEED IDLE Z29S |
Парткод: | 5MVG137DN036 |
Деталь: | ROLLER PICKUP ASSY |
Парткод: | 5AAVR0LL+048 |
Цена: | 1 000 ₽ |
Деталь: | DISCHARGER ASSY |
Парткод: | 302F300670 |
Деталь: | BRACKET FEED |
Парткод: | 5MVX664SH004 |
Деталь: | ROLLER TRANSFER ASSY |
Парткод: | 302F300850 |
Деталь: | HOLDER RELEASE |
Парткод: | 5MVX376DN001 |
Деталь: | BUSH TRANSFER |
Парткод: | 5MVX322DB019 |
Деталь: | SPRING TRANS |
Парткод: | 5MMW251SX004 |
Деталь: | ROLLER REGIST UP |
Парткод: | 302F324000 |
Деталь: | TR-510 PRE TRANSFER UNIT |
Парткод: | 302F393170 |
Деталь: | CL-510 CLEANING UNIT |
Парткод: | 302F393200 |
Деталь: | BRACKET FD GEAR ASSY |
Парткод: | 302F300890 |
Деталь: | BRACKET FD GEAR |
Парткод: | 302D902391 |
Деталь: | GEAR IDLE Z25 |
Парткод: | 5MVG137DN014 |
Деталь: | GEAR IDLE Z16 |
Парткод: | 2B720380 |
Деталь: | GEAR FD Z15-Z18 |
Парткод: | 5MVG127DN122 |
Деталь: | GEAR FD Z29 |
Парткод: | 5MVG138DN048 |
Деталь: | GEAR FD Z28 |
Парткод: | 5MVG138DN047 |
Деталь: | FAN MOTOR |
Парткод: | 302F344010 |
Деталь: | Toner Motor Assy |
Парткод: | 302F300441 |
Деталь: | PIN CONTACT BIAS |
Парткод: | 302F302030 |
Деталь: | SPRING CONTACT CLN |
Парткод: | 5MMW222LD003 |
Деталь: | BUSH FRAME |
Парткод: | 5MVM176DN035 |
Деталь: | PLATE EARTH FUSER |
Парткод: | 5MMX632SD006 |
Деталь: | PLATE EARTH HV B |
Парткод: | 5MMZ242LD002 |
Деталь: | GEAR ROLL FD Z18 |
Парткод: | 5MVG127DN076 |
Деталь: | WASTE TONER ASSY |
Парткод: | 302F300430 |
Деталь: | Push Switch 01 SN |
Парткод: | 5ESP01000101+01 |
Деталь: | LOCK COVER M/P |
Парткод: | 5MVX522DB006 |
Деталь: | SP LOCK COVER M/P |
Парткод: | 5MMW261LD051 |
Деталь: | COVER HARNESS |
Парткод: | 302D902372 |
Деталь: | CONN. CORD ASSY S02877 |
Парткод: | 5AACCNSR4GEA++P |
Деталь: | PLATE EARTH HV A |
Парткод: | 5MMS632LD001 |
Деталь: | CONN. CORD ASSY S02861 |
Парткод: | 5AACCNSN7GEA++P |
Деталь: | PUSH SWITCH 03 SN |
Парткод: | 5FSP03090001+01 |
Деталь: | P.W. BOARD ASSY SENSOR |
Парткод: | 302F301320 |
Деталь: | CONN. CORD ASSY S02849 |
Парткод: | 5AACCNSM5GEA++P |
Деталь: | LEVER EF |
Парткод: | 5MVX322DB023 |
Деталь: | SPRING LEVER EF |
Парткод: | 5MMW222LD002 |
Деталь: | CLEANER ID ASSY |
Парткод: | 5AAYA80E++75 |
Деталь: | SENSOR ID ASSY |
Парткод: | 302F300410 |
Деталь: | CONN. CORD ASSY S02975 |
Парткод: | 5AACCNSS8GEA++P |
Деталь: | BRACKET HV DLP K ASSY |
Парткод: | 5AAYA80E++71 |
Деталь: | BRACKET HV DLP Y ASSY |
Парткод: | 5AAYA80E++73 |
Деталь: | BRACKET HV DLP C ASSY |
Парткод: | 5AAYA80E++72 |
Деталь: | PLATE FRAME DRUM |
Парткод: | 5MMS866SD001 |
Деталь: | ROD INTERLOCK |
Парткод: | 302D902311 |
Деталь: | SPRING INTER LOCK |
Парткод: | 5MMW451LD001 |
Деталь: | CONN. CORD ASSY S02851 |
Парткод: | 5AACCNSM7GEA++P |
Деталь: | TRANS ASSY HI VOLTAGE DLP |
Парткод: | 302F345020 |
Деталь: | TRANS ASSY HI VOLTAGE MAIN |
Парткод: | 302F345010 |
Деталь: | PLATE SHIELD PWB |
Парткод: | 5MMB861SD004 |
Деталь: | CONN. CORD ASSY S02978 |
Парткод: | 5AACCNST1GEA++P |
Деталь: | P.W.B.ASSY KP-1091 LEDRLY B26 (16 PPM) |
Парткод: | 5AAPRIFR2018AHR |
Деталь: | P.W.B.ASSY PA0008 LEDRLY (24 PPM) |
Парткод: | 302F401300 |
Деталь: | CONN. CORD ASSY S03113 (16 PPM) |
Парткод: | 302F346140 |
Деталь: | CONN.CORD ASSY S03109 (24 PPM) |
Парткод: | 302F446020 |
Деталь: | BRACKET HV ASSY (16 PPM) |
Парткод: | 302F300870 |
Деталь: | BRACKET HV ASSY (24 PPM) |
Парткод: | 302F400490 |
Деталь: | BRACKET FAN |
Парткод: | 302D902542 |
Деталь: | FAN MOTOR |
Парткод: | 302F344030 |
Деталь: | OZONE FILTER |
Парткод: | 5MVB661XF001 |
Деталь: | Plate Earth FD |
Парткод: | 5MMX332SD003 |
Деталь: | SPRING EARTH FD |
Парткод: | 302F302020 |
Деталь: | CONN.CORD ASSY S03106 (16 PPM) |
Парткод: | 302F346090 |
Деталь: | CONN. CORD ASSY S02979 (24 PPM) |
Парткод: | 5AACCNST2GEA++P |
Деталь: | PT.SENSOR EE-SX1235A |
Парткод: | 5HNXEESX1235+01 |
Деталь: | CONN. CORD ASSY S02870 |
Парткод: | 5AACCNSP6GEA++P |
Деталь: | BUSH FD |
Парткод: | 5MVM266DN006 |
Деталь: | CONN. CORD ASSY S02856 |
Парткод: | 5AACCNSN2GEA++P |
Деталь: | ROLLER FD LOW |
Парткод: | 302F302010 |
Деталь: | ROLLER PINCH |
Парткод: | 5MVM273DB006 |
Деталь: | BRACKET ROLLER PINCH |
Парткод: | 5MMX431LD017 |
Деталь: | Cord Keep |
Парткод: | 5MMX221SW002 |
Деталь: | FERRITE CORE |
Парткод: | 5EYBE1392700101 |
Деталь: | FK-510(E) FUSER UNIT |
Парткод: | 302F393070 |
Деталь: | FK-510(U) FUSER UNIT |
Парткод: | 302F393080 |
Деталь: | SPRING PRESS |
Парткод: | 5MMW361SD005 |
Деталь: | FRAME FUSER UP |
Парткод: | 5MVB866KB002 |
Деталь: | THERMISTOR ASSY |
Парткод: | 2D927090 |
Деталь: | THERMOSTAT 250V150C |
Парткод: | YF0A1530 |
Деталь: | PLATE RELEASE L |
Парткод: | 5MMX641SD005 |
Деталь: | PLATE RELEASE R |
Парткод: | 5MMX641SD006 |
Деталь: | CONN. CORD ASSY S02857 |
Парткод: | 5AACCNSN3GEA++P |
Деталь: | CONN. CORD ASSY S02858 |
Парткод: | 5AACCNSN4GEA++P |
Деталь: | PLATE PRESS L |
Парткод: | 5MMX641SD003 |
Деталь: | PLATE PRESS R |
Парткод: | 5MMX641SD004 |
Деталь: | ROLLER FIX UP |
Парткод: | 5MMT888AX024 |
Деталь: | ROLLER FIX LOW |
Парткод: | 5MMT888AX025 |
Деталь: | GUIDE CHANGE |
Парткод: | 5MVX833CB006 |
Деталь: | ACTUATOR FUSER |
Парткод: | 5MVX731CB004 |
Деталь: | SPRING ACTUATOR |
Парткод: | 5MMW151LD007 |
Деталь: | SPRING PULLEY EXIT |
Парткод: | 5MMW501LD003 |
Деталь: | LABEL EXIT |
Парткод: | 302F325030 |
Деталь: | GUIDE EXIT |
Парткод: | 5MVX865KB003 |
Деталь: | BUSH FD |
Парткод: | 5MVM266DN006 |
Деталь: | GEAR IDLE Z18 |
Парткод: | 302F325060 |
Деталь: | GEAR EXIT Z15S |
Парткод: | 302D920041 |
Деталь: | SPRING EXIT R |
Парткод: | 5MMW161SD013 |
Деталь: | SPRING EXIT L |
Парткод: | 5MMW161SD012 |
Деталь: | SHAFT EXIT |
Парткод: | 5MMT722SZ001 |
Деталь: | PULLEY EXIT |
Парткод: | 302F325070 |
Деталь: | ROLLER EXIT |
Парткод: | 302F325000 |
Деталь: | COVER FUSER R |
Парткод: | 5MVB663KB003 |
Деталь: | GEAR JOINT Z36 |
Парткод: | 302F325040 |
Деталь: | SEAL HEATER R |
Парткод: | 302F325020 |
Деталь: | Ring Stop |
Парткод: | 302D925020 |
Деталь: | GEAR HEAT Z43S |
Парткод: | 5MVG154XN001 |
Деталь: | BUSH FUSER |
Парткод: | 5MVM180XN002 |
Деталь: | FUSER BEARING |
Парткод: | 5MBE6804ZZNR |
Деталь: | COVER FUSER LOW |
Парткод: | 5MVX872KB001 |
Деталь: | GUIDE ENTRANCE LOW |
Парткод: | 5MVB833KB004 |
Деталь: | FRAME FUSER |
Парткод: | 5MMX876SD003 |
Деталь: | LAMP HEATER UP 240V |
Парткод: | 5HZPB2412120801 |
Деталь: | LAMP HEATER UP 120V |
Парткод: | 5HZPB1214220901 |
Деталь: | LAMP HEATER LOW 240V |
Парткод: | 5HZPB2411520201 |
Деталь: | LAMP HEATER LOW 120V |
Парткод: | 5FZPB1212920101 |
Деталь: | COVER FUSER L |
Парткод: | 302D925010 |
Деталь: | STUD SCREW M3 |
Парткод: | 302F325010 |
Деталь: | SOLENOID |
Парткод: | 5FZSA2401020309 |
Деталь: | ACTUATOR SOL |
Парткод: | 302D920012 |
Деталь: | SPRING PIN /M2.5 X 18 S-BLK |
Парткод: | 5MBP2518WXSP |
Деталь: | RUBBER PIN |
Парткод: | 5MVM111RB002 |
Деталь: | P.W.B.ASSY KP-970 FUSER |
Парткод: | 5AAPRIFC1030AHP |
Деталь: | NUT FUSER A |
Парткод: | 5MMS111SL002 |
Деталь: | PLATE HEATER L |
Парткод: | 5MMX641RD001 |
Деталь: | SPRING SOL |
Парткод: | 5MMW261LJ032 |
Деталь: | DV-5CP0K DLP UNIT K |
Парткод: | 302F393021 |
Деталь: | DV-5CP2K DLP UNIT K |
Парткод: | 302F393161 |
Деталь: | DV-5CP0Y DLP UNIT Y |
Парткод: | 302F393031 |
Деталь: | DV-5CP2Y DLP UNIT Y |
Парткод: | 302F393131 |
Деталь: | DV-5CP0M DLP UNIT M |
Парткод: | 302F393051 |
Деталь: | DV-5CP2M DLP UNIT M |
Парткод: | 302F393141 |
Деталь: | DV-5CP0C DLP UNIT C |
Парткод: | 302F393041 |
Деталь: | DV-5CP2C DLP UNIT C |
Парткод: | 302F393151 |
Деталь: | LID CONTROLLER |
Парткод: | 5MMS884SD001 |
Деталь: | PLATE OPTION |
Парткод: | 5MMS636SD009 |
Деталь: | PANEL REAR |
Парткод: | 5MMB861SD003 |
Деталь: | SCREW OP |
Парткод: | 5MMT263SN012++R |
Деталь: | P.W.B.ASSY KP-1138 FLASH DIMM |
Парткод: | 302F301241 |
Деталь: | RAIL OPTION |
Парткод: | 302D903071 |
Деталь: | P.W.B. ASSY MAIN KIT (16 PPM) |
Парткод: | 302F380270 |
Деталь: | P.W.B. ASSY MAIN WITH SOFTWARE (24 PPM) |
Парткод: | 302F401310 |
Деталь: | BOX CONTROLLER (16 PPM) |
Парткод: | 302D903011 |
Деталь: | BOX CONTROLLER (24 PPM) |
Парткод: | 302F403000 |
Деталь: | FOOT |
Парткод: | 5MVX221RB014 |
Деталь: | CONN. CORD ASSY S02880 |
Парткод: | 302F346060 |
Деталь: | CONN.CORD ASSY S03108 |
Парткод: | 302F346110 |
Деталь: | CONN. CORD ASSY S02850 |
Парткод: | 5AACCNSM6GEA++P |
Деталь: | FAN MOTOR |
Парткод: | WNAA1060 |
Деталь: | CASE PWB POWER |
Парткод: | 5MVX876SB009 |
Деталь: | CONN. CORD ASSY S02852 |
Парткод: | 5AACCNSM8GEA++P |
Деталь: | SWITCHING REGULATOR 230V (16 PPM) ( Excl. KMA ) |
Парткод: | 302F345030 |
Деталь: | SWITCHING REGULATOR 230V (24 PPM) ( Excl. KMA ) |
Парткод: | 302F445010 |
Деталь: | SWITCHING REGULATOR (16 PPM) ( KMA ) |
Парткод: | 5AAEZA80U++2++P |
Деталь: | SWITCHING REGULATOR (24 PPM) ( KMA ) |
Парткод: | 302F445020 |
Деталь: | ROD SW POWER |
Парткод: | 5MMW803SD001 |
Деталь: | BRACKET BOX |
Парткод: | 5MMX733SD001 |
Деталь: | P.W.B.ASSY ENGINE WITH SOFTWARE(EU) (16 PPM) ( Excl. KMA ) |
Парткод: | 302F301250 |
Деталь: | P.W.B.ASSY ENGINE WITH SOFTWARE(EU) (24 PPM) ( Excl. KMA ) |
Парткод: | 302F401270 |
Деталь: | P.W.B.ASSY ENGINE WITH SOFTWARE(SP) (16 PPM) ( KMA ) |
Парткод: | 302F301350 |
Деталь: | P.W.B.ASSY ENGINE WITH SOFTWARE(U) (24 PPM) ( KMA ) |
Парткод: | 302F401290 |
Деталь: | LEVER SW |
Парткод: | 5MVX433SH002 |
Деталь: | SHIELD CLAMP /EMT-4N |
Парткод: | 5MVX321NP001++R |
Деталь: | FAN MOTOR (24PPM) |
Парткод: | 302F444010 |
Деталь: | EMI GASKET |
Парткод: | 5MVQ411RX001++R |
Деталь: | DR-510A DRIVE PRO UNIT (16 PPM) |
Парткод: | 302F393100 |
Деталь: | DR-520A DRIVE PRO UNIT (24 PPM) |
Парткод: | 302F493030 |
Деталь: | DR-510C DRIVE FUSER UNIT (16 PPM) |
Парткод: | 302F393120 |
Деталь: | DR-520C DRIVE FUSER UNIT (24 PPM) |
Парткод: | 302F493050 |
Деталь: | DR-510B DRIVE FEED UNIT (16 PPM) |
Парткод: | 302F393110 |
Деталь: | DR-520B DRIVE FEED UNIT (24 PPM) |
Парткод: | 302F493040 |
Деталь: | PLATE DRIVE MAIN |
Парткод: | 302F331010 |
Деталь: | STEPPING MOTOR PRO (16 PPM) |
Парткод: | 302F331001 |
Деталь: | STEPPING MOTOR PRO (24 PPM) |
Парткод: | 302F431000 |
Деталь: | FAN MOTOR |
Парткод: | 302F344020 |
Деталь: | GEAR Z21H-Z20H |
Парткод: | 302D922161 |
Деталь: | GEAR Z40H |
Парткод: | 302F331022 |
Деталь: | GEAR Z72H-Z22H |
Парткод: | 302D922181 |
Деталь: | SPRING LEVER |
Парткод: | 302F331100 |
Деталь: | P.W.B.ASSY KP1103 ENGRLY |
Парткод: | 302F301300 |
Деталь: | DC motor |
Парткод: | 302F344040 |
Деталь: | GEAR WORM |
Парткод: | 5MVG115DB002 |
Деталь: | PLATE IDLE ARM |
Парткод: | 302F331041 |
Деталь: | BRACKET MOTOR |
Парткод: | 302F331030 |
Деталь: | CAM GEAR Z34H |
Парткод: | 302F331060 |
Деталь: | HOOK CRANK |
Парткод: | 302F331160 |
Деталь: | SPRING HOOK CRANK |
Парткод: | 302F331170 |
Деталь: | LEVER CAM |
Парткод: | 302F331080 |
Деталь: | SPRING IDLE ARM |
Парткод: | 302F331090 |
Деталь: | LEVER PLATE IDLE |
Парткод: | 302F331050 |
Деталь: | BRACKET HV MAIN ASSY |
Парткод: | 302F300660 |
Деталь: | BRACKET HV MAIN |
Парткод: | 302F331150 |
Деталь: | CONTACT MAIN B |
Парткод: | 302F331190 |
Деталь: | PIN HV CONTACT |
Парткод: | 302F331180 |
Деталь: | SPRING HV MAIN |
Парткод: | 302F331200 |
Деталь: | Spring HV Contact |
Парткод: | 5MMW311LD003 |
Деталь: | CONN. CORD ASSY S02981 |
Парткод: | 5AACCNST4GEA++P |
Деталь: | CONN. CORD ASSY |
Парткод: | 302F346080 |
Деталь: | STEPPING MOTOR FUSER (16 PPM) |
Парткод: | 5FZNT2400902+01 |
Деталь: | STEPPING MOTOR FUSER (24 PPM) |
Парткод: | 302F431010 |
Деталь: | GEAR Z43S (16 PPM) |
Парткод: | 302F331250 |
Деталь: | GEAR Z43S (24 PPM) |
Парткод: | 5MVG154BN001 |
Деталь: | BUSH SHAFT CLUTCH |
Парткод: | 5MVM176DN034 |
Деталь: | SHAFT CLUTCH B |
Парткод: | 302F331210 |
Деталь: | Poly Washer |
Парткод: | 5MBWN62955NN |
Деталь: | GEAR Z22S ASSY |
Парткод: | 5AAVGEAR+045 |
Деталь: | BUSH DRIVE FUSER |
Парткод: | 5MVM331DN002 |
Деталь: | GEAR DRIVE FUSER Z22 |
Парткод: | 302D915211 |
Деталь: | SHAFT CLUTCH |
Парткод: | 302F331220 |
Деталь: | GEAR Z48S |
Парткод: | 302D922111 |
Деталь: | GEAR Z29S ASSY |
Парткод: | 5AAVGEAR+044 |
Деталь: | GEAR Z14-Z20 |
Парткод: | 5MVG122DN009 |
Деталь: | GEAR Z93S-Z24S |
Парткод: | 302D922101 |
Деталь: | PLATE DRIVE FUSER |
Парткод: | 5MMX763SD003 |
Деталь: | GEAR Z56H-Z20S |
Парткод: | 302F331260 |
Деталь: | STEPPING MOTOR FEED (16 PPM) |
Парткод: | 302F344050 |
Деталь: | STEPPING MOTOR FEED (24 PPM) |
Парткод: | 302F431020 |
Деталь: | COVER DRIVE FEED |
Парткод: | 5MVB732XB002 |
Деталь: | GEAR CL Z21S |
Парткод: | 302D922081 |
Деталь: | CLUTCH FEED |
Парткод: | 302F331130 |
Деталь: | CLUTCH REGIST |
Парткод: | 302F331120 |
Деталь: | GEAR Z30S |
Парткод: | 302D922051 |
Деталь: | GEAR Z35S |
Парткод: | 302D922041 |
Деталь: | GEAR Z38S-Z14S |
Парткод: | 302D922061 |
Деталь: | Gear Z38S |
Парткод: | 302D922071 |
Деталь: | BRACKET DRIVE FEED |
Парткод: | 302F331140 |
Деталь: | SHEET MOTOR FEED (24 PPM) |
Парткод: | 5MMS656AX001 |
Деталь: | TRAY M/P ASSY |
Парткод: | 302F300000 |
Деталь: | COVER M/P |
Парткод: | 5MVB878SH001 |
Деталь: | TRAY M/P |
Парткод: | 302D906012 |
Деталь: | BASE M/P |
Парткод: | 5MVB864SH009 |
Деталь: | GEAR MANUAL |
Парткод: | 5MVG127DH001 |
Деталь: | SPRING LOCK M/P |
Парткод: | 5MMW261SM001 |
Деталь: | GUIDE M/P L |
Парткод: | 5MVL673DH003 |
Деталь: | GUIDE M/P R |
Парткод: | 5MVL673DH004 |
Деталь: | SPRING SEPARATOR |
Парткод: | 5MMW261LD039 |
Деталь: | SEPARATOR M/P ASSY |
Парткод: | 5AAVCASET248 |
Деталь: | SP BOTTOM M/P L |
Парткод: | 5MMW461SD006 |
Деталь: | SP BOTTOM M/P R |
Парткод: | 5MMW461SD004 |
Деталь: | BOTTOM MULTI ASSY |
Парткод: | 5AAVCASET249 |
Деталь: | BRACKET BOTTOM |
Парткод: | 5MVX533DN002 |
Деталь: | DK-510 DRUM UNIT (16 PPM) |
Парткод: | 302F393010 |
Деталь: | DK-520 DRUM UNIT (24 PPM) |
Парткод: | 302F493060 |
Деталь: | LK-510 LED HEAD UNIT (16 PPM) |
Парткод: | 302F393090 |
Деталь: | LK-520 LED HEAD UNIT (24 PPM) |
Парткод: | 302F493080 |
Деталь: | CONN. CORD ASSY LEDRLY-BLH |
Парткод: | 302F346010 |
Деталь: | CONN. CORD ASSY LEDRLY-BLH |
Парткод: | 302F346020 |
Деталь: | COVER LED |
Парткод: | 302F311021 |
Деталь: | MC-510 MCH ASSY |
Парткод: | 302F393190 |
Деталь: | SPRING LOCK L |
Парткод: | 5MMW161LD056 |
Деталь: | LEVER DRUM L |
Парткод: | 5MVX421SL001 |
Деталь: | SPRING EARTH |
Парткод: | 5MMW241LD024 |
Деталь: | LEVER DRUM R |
Парткод: | 5MVX422SL003 |
Деталь: | SPRING LOCK R |
Парткод: | 5MMW251SD002 |
Деталь: | PC-60LG(A4) CASSETTE ASSY |
Парткод: | 5PLPXZ7APKX |
Деталь: | PC-60LG(LTR) CASSETTE ASSY ( Excl.KMTW ) |
Парткод: | 5PLPXCUAPKX |
Деталь: | PC-60LG(A4) CASSETTE ASSY ( KMTW only ) |
Парткод: | 5PLPXDSAPKX |
Деталь: | PLATE BOTTOM |
Парткод: | 5MMX883SD004 |
Деталь: | GRID CLEANER 3 ASSY |
Парткод: | 4AK85050 |
Деталь: | LABEL OPERATION ( Excl.KMTW ) |
Парткод: | 5MVVL221GE1H |
Деталь: | BOTTLE ASSY |
Парткод: | 2D969140 |
Деталь: | SHEET FRICTION |
Парткод: | 5MVS421RN006 |
Деталь: | AC CORD ASSY (KMAUS) |
Парткод: | 5AACAC485ASA++P |
Деталь: | AC CORD ASSY (KMUK) |
Парткод: | 5AACAC484BSA++P |
Деталь: | AC CORD ASSY ( KMA ) |
Парткод: | 5GS2BR02130A |
Деталь: | AC CORD ASSY ( Excl. KMUK/KMAUS ) |
Парткод: | 5AACAC476EEA++P |
Деталь: | PLATE SIDE L |
Парткод: | 302BS06061 |
Деталь: | HOLDER DIAL |
Парткод: | 5MVX543DH002 |
Деталь: | DIAL CASSETTE |
Парткод: | 5MVM586SH001 |
Деталь: | LABEL SIZE LGL |
Парткод: | 5MVVL171WN03 |
Деталь: | LOCK LEVER SIDE |
Парткод: | 5MVX642DG001 |
Деталь: | SPRING LOCK GUIDE |
Парткод: | 5MMW166LD010 |
Деталь: | EARTH PLATE |
Парткод: | 5MMX653LD004 |
Деталь: | LOCK BOTTOM |
Парткод: | 5MVX432DN005 |
Деталь: | SP STOPPER BOTTOM |
Парткод: | 5MMW251LD048 |
Деталь: | GEAR CASSETTE |
Парткод: | 5MVG127DB046 |
Деталь: | SPRING FEED L |
Парткод: | 5MMW161LD045 |
Деталь: | BUSH4 |
Парткод: | 5MVM164DN007 |
Деталь: | Roller feed |
Парткод: | 5MVT774DN001 |
Деталь: | SPRING FEED R |
Парткод: | 5MMW161LD044 |
Деталь: | SPRING BOTTOM EARTH |
Парткод: | 5MMW682LD005 |
Деталь: | SPRING END |
Парткод: | 5MMW151SD003 |
Деталь: | END FENCE |
Парткод: | 5MVX664DN001 |
Деталь: | LOCK LEVER END |
Парткод: | 5MVX642DG002 |
Деталь: | PLATE SIDE R |
Парткод: | 302BS06051 |
Деталь: | SPRING BOTTOM |
Парткод: | 5MMW682LD004 |
Деталь: | LEVER INDICATOR |
Парткод: | 5MVX764DN001 |
Деталь: | INDICATER PAPER |
Парткод: | 5MVX422SD002 |
Деталь: | BASE CASSETTE LGL |
Парткод: | 5MVB987SH018 |
Деталь: | COVER ROLLER |
Парткод: | 5MVX853SH003 |
Деталь: | SPRING RETARD |
Парткод: | 5MMW151LD004 |
Деталь: | HOLDER RETARD |
Парткод: | 5MVX644DN001 |
Деталь: | GUIDE RETARD |
Парткод: | 5MVX632SH005 |
Деталь: | RETARD ROLL ASSY |
Парткод: | 5AAVR0LL+052 |
Деталь: | Ролик отделения бумаги |
Парткод: | 302BR06521 |
Цена: | 4 000 ₽ |
Деталь: | Ролик отделения бумаги в держателе, в сборе |
Парткод: | CET4322 |
Цена: | 450 ₽ |
Деталь: | Резина ролика отделения бумаги |
Парткод: | CET4322PT |
Цена: | 110 ₽ |
Деталь: | Блок проявки |
Парткод: | DV-510C |
Деталь: | Блок проявки |
Парткод: | DV-510K |
Деталь: | Блок проявки |
Парткод: | DV-510M |
Деталь: | Блок проявки |
Парткод: | DV-510Y |
Деталь: | Узел переноса изображения |
Парткод: | TR-521 |
Деталь: | PANEL UNIT, MFC9840CDW |
Парткод: | FK-510 |
Цена: | 34 000 ₽ |
Деталь: | COVER TOP ASSY |
Парткод: | 302F300830 |
Деталь: | COVER TOP |
Парткод: | 5MVB986SH026 |
Деталь: | SPRING PULLEY |
Парткод: | 5MMW251LD046 |
Деталь: | ROLLER PINCH |
Парткод: | 5MVM273DB006 |
Деталь: | ACTUATOR FD |
Парткод: | 5MVX732CB003 |
Деталь: | FRAME FD |
Парткод: | 5MVX852CH002 |
Деталь: | GUIDE STOCK |
Парткод: | 5MVX332DB015 |
Деталь: | ROLLER FD |
Парткод: | 302F304020 |
Деталь: | FRAME FD LOW |
Парткод: | 5MVX866XB003 |
Деталь: | BUSH FD |
Парткод: | 5MVM266DN006 |
Деталь: | SPRING FD LOW |
Парткод: | 5MMW463LD001 |
Деталь: | DISCHARGER FD |
Парткод: | 302F304030 |
Деталь: | GEAR ROLL FD Z18 |
Парткод: | 5MVG127DN076 |
Деталь: | COVER LEFT ASSY |
Парткод: | 302F300370 |
Деталь: | COVER SIDE |
Парткод: | 302D904041 |
Деталь: | KEY BOARD ASSY/B-26(KME) (16 PPM) ( Excl. KMFR/KMIT ) |
Парткод: | 302F300330 |
Деталь: | KEY BOARD ASSY/B-27(KME) (24 PPM) ( Excl. KMFR/KMIT ) |
Парткод: | 302F400170 |
Деталь: | KEY BOARD ASSY/B-26(KMFR) (16 PPM) ( KMFR only ) |
Парткод: | 302F300340 |
Деталь: | KEY BOARD ASSY/B-27(KMFR) (24 PPM) ( KMFR only ) |
Парткод: | 302F400180 |
Деталь: | KEY BOARD ASSY/B-26(KMIT) (16 PPM) ( KMIT only ) |
Парткод: | 302F300350 |
Деталь: | KEY BOARD ASSY/B-27(KMIT) (24 PPM) ( KMIT only ) ( 24 PPM ) |
Парткод: | 302F400190 |
Деталь: | COVER PANEL FRENCH ( KMFR only ) |
Парткод: | 5MVB761SH013 |
Деталь: | COVER OABEL ITALIAN ( KMIT only ) |
Парткод: | 5MVB761SH014 |
Деталь: | COVER PANEL E ( Excl. KMFR/KMIT ) |
Парткод: | 5MVB761SH012 |
Деталь: | COVER FRONT |
Парткод: | 5MVB866CH022 |
Деталь: | COVER RIGHT ASSY |
Парткод: | 302F300390 |
Деталь: | COVER REAR |
Парткод: | 302D904051 |
Коды ошибок
0100
0420
0460
0480
0951
0952
0953
0954
1200
2610
2620
2630
5301
5302
5303
5304
6000
6020
6030
6100
6120
6130
6400
7001
7002
7003
7004
7401
7402
7403
7404
7411
7412
7413
7414
7600
9530
D020
F000
F020
F030
F040
F226
Описание
Error code: | 0100 |
Display: | MAINTENANCE CALL 0100 |
Description: | Backup memory device error |
Causes: | Defective flash memory. Defective main PWB. |
Remedy: | EEPROM (main PWB) 1. Turn the main power swtch off and after 5 seconds, then turn power on. 2. Check that the EEPROM on the main circuit PWB is peroperly installed on the main circuit PWB and, if not, re-install it. 3. Replace the main PWB |
Error code: | 0420 |
Description: | Paper feeder communication error Communication error between control PWB and optional paper feeder. |
Causes: | Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF main-PWB. |
Remedy: | Improper installation paper feeder. Follow installation instruction carefully again. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Defective control PWB. Replace the control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Defective PF main- PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
Error code: | 0460 |
Description: | Communication error between printer and duplex unit • The CPU (U2) of engine controller PWB (KP-992) does not communicate with the PD-800 duplex unit normally. |
Causes: | Defective engine controller PWB (KP-992). Defective main board of PD-800 duplex unit. Defective paper feeder/options relay PWB (KP- 995). Defective connection printer and PD-800 duplex unit. Defective harness (2CK2719) between engine controller PWB (KP-992) and paper feeder/ options relay PWB (KP-995), or poor contact of the connector terminals. |
Remedy: | Replace the engine controller PWB (KP- 992). Replace the main board of duplex unit PD- 30. See PD-800 duplex unit’s service manual. Replace the paper feeder/options relay PWB (KP-995). Reinstall PD-800 duplex unit. Check the continuity of the harness (2CK2719). Check the insertion of connectors. |
Error code: | 0480 |
Description: | Duplexer firmware error When turning on power, the ASIC of the engine controller PWB (A0004) recognized the optional duplexer, but the firmware checksum error is reported from the duplexer. The duplexer is not recognized because of the defective firmware. |
Causes: | Defective duplexer. |
Remedy: | Defective duplexer. After removing or replacing the duplexer, do the operation check. If operation is normal, replace the duplexer. |
Error code: | 0951 |
Description: | LED print head 4 (EEPROM) communication error [black drum unit] The LED print head 4 (EEPROM) of the black drum unit does not communicate with the engine controller PWB (A0004) normally. The incompatible LED print head is installed to the printer. |
Causes: | Defective LED print head 4. Installing the LED print head, which is incompatible with the printer specification. Defective engine controller PWB (A0004). Defective LED print heads relay PWB (A0176). Defective harness (S03214) between engine controller PWB (A0004) and LED print heads relay PWB (A0176), or poor contact of the connector terminals. Defective FFCs (S03011) between LED print head 4 and LED print heads relay PWB (A0176), or poor contact of the FFC terminals.D |
Remedy: | Defective LED print head 4. Replace the LED print head 4. See page 1- 5-15. Installing the LED print head, which is incompatible with the printer specification. Install the compatible LED print head to the black drum unit. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). Defective LED print heads relay PWB (A0176). Replace the LED print heads relay PWB (A0176). Defective harness (S03214) between engine controller PWB (A0004) and LED print heads relay PWB (A0176), or poor contact of the connector terminals. Check the continuity of the harness (S03214), check the insertion of YC3 of the engine controller PWB (A0004), if there is trouble, remedy or replace. Defective FFCs (S03011) between LED print head 4 and LED print heads relay PWB (A0176), or poor contact of the FFC terminals. Check the connection of the FFCs with the black drum unit and the printer main unit, check the continuity of the FFCs (S03011), check the connection of the LED print head 4, if there is trouble, remedy or replace. |
Error code: | 0952 |
Description: | LED print head 2 (EEPROM) communication error [cyan drum unit] The LED print head 2 (EEPROM) of the cyan drum unit does not communicate with the engine controller PWB (A0004) normally. |
Causes: | Defective LED print head 2. Installing the LED print head, which is incompatible with the printer specification. Defective engine controller PWB (A0004). Defective LED print heads relay PWB (A0176). Defective harness (S03214) between engine controller PWB (A0004) and LED print heads relay PWB (A0176), or poor contact of the connector terminals. Defective FFCs (S03011) between LED print head 2 and LED print heads relay PWB (A0176), or poor contact of the FFC terminals. |
Remedy: | Defective LED print head 2. Replace the LED print head 2. See page 1- 5-15. Installing the LED print head, which is incompatible with the printer specification. Install the compatible LED print head to the black drum unit. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). Defective LED print heads relay PWB (A0176). Replace the LED print heads relay PWB (A0176). Defective harness (S03214) between engine controller PWB (A0004) and LED print heads relay PWB (A0176), or poor contact of the connector terminals. Check the continuity of the harness (S03214), check the insertion of YC3 of the engine controller PWB (A0004), if there is trouble, remedy or replace. Defective FFCs (S03011) between LED print head 2 and LED print heads relay PWB (A0176), or poor contact of the FFC terminals. Check the connection of the FFCs with the cyan drum unit and the printer main unit, check the continuity of the FFCs (S03011), check the connection of the LED print head 2, if there is trouble, remedy or replace. |
Error code: | 0953 |
Description: | LED print head 1 (EEPROM) communication error [magenta drum The LED print head 1 (EEPROM) the magenta drum unit does communicate with the engine controller PWB (A0004) normally. |
Causes: | Defective LED print head 1. Installing the LED print head, which is incompatible with the printer specification. Defective engine controller PWB (A0004). Defective LED print heads relay PWB (A0176). Defective harness (S03214) between engine controller PWB (A0004) and LED print heads relay PWB (A0176), or poor contact of the connector terminals. Defective FFCs (S03011) between LED print head 1 and LED print heads relay PWB (A0176), or poor contact of the FFC terminals. |
Remedy: | Defective LED print head 1. Replace the LED print head 1. See page 1- 5-15. Installing the LED print head, which is incompatible with the printer specification. Install the compatible LED print head to the black drum unit. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). Defective LED print heads relay PWB (A0176). Replace the LED print heads relay PWB (A0176). Defective harness (S03214) between engine controller PWB (A0004) and LED print heads relay PWB (A0176), or poor contact of the connector terminals. Check the continuity of the harness (S03214), check the insertion of YC3 of the engine controller PWB (A0004), if there is trouble, remedy or replace. Defective FFCs (S03011) between LED print head 1 and LED print heads relay PWB (A0176), or poor contact of the FFC terminals. Check the connection of the FFCs with the magenta drum unit and the printer main unit, check the continuity of the FFCs (S03011), check the connection of the LED print head 1, if there is trouble, remedy or replace. |
Error code: | 0954 |
Description: | LED print head 3 (EEPROM) communication error [yellow drum unit] The LED print head 3 (EEPROM) of the yellow drum unit does not communicate with the engine controller PWB (A0004) normally. |
Causes: | Defective LED print head 3. Installing the LED print head, which is incompatible with the printer specification. Defective engine controller PWB (A0004). Defective LED print heads relay PWB (A0176). Defective harness (S03214) between engine controller PWB (A0004) and LED print heads relay PWB (A0176), or poor contact of the connector terminals. Defective FFCs (S03011) between LED print head 3 and LED print heads relay PWB (A0176), or poor contact of the FFC terminals. |
Remedy: | Defective LED print head 3. Replace the LED print head 3. See page 1- 5-15. Installing the LED print head, which is incompatible with the printer specification. Install the compatible LED print head to the black drum unit. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). Defective LED print heads relay PWB (A0176). Replace the LED print heads relay PWB (A0176). Defective harness (S03214) between engine controller PWB (A0004) and LED print heads relay PWB (A0176), or poor contact of the connector terminals. Check the continuity of the harness (S03214), check the insertion of YC3 of the engine controller PWB (A0004), if there is trouble, remedy or replace. Defective FFCs (S03011) between LED print head 3 and LED print heads relay PWB (A0176), or poor contact of the FFC terminals. Check the connection of the FFCs with the magenta drum unit and the printer main unit, check the continuity of the FFCs (S03011), check the connection of the LED print head 3, if there is trouble, remedy or replace. |
Error code: | 1200 |
Description: | Side registration motor error The duplexer PWB of the optional duplexer cannot detect the home position of the adjust guide. |
Causes: | Defective duplexer. Defective engine controller PWB (A0004). |
Remedy: | Defective duplexer. Refer to the duplexer`s service manual. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). |
Error code: | 2610 |
Description: | PF paper feed motor error (paper feeder) After PF paper feed motor is driven, the ready signal does not turn to L within 2 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective PF paper feed motor. Defective PF main PWB. |
Remedy: | PF paper feed motor 1. To check the feed unit operation, execute U247 2PF - Motor ON. 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF paper feed motor and PF main PWB (YC16) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the paper feed motor. PF main PWB Replace the PF main PWB (Refer to the service manual for the paper feeder). |
Error code: | 2620 |
Description: | PF drive motor 3 error (PF3) During the motor drive, the stable signal is not turned on for continuous 5 s. |
Remedy: | Defective connector cable or poor contact in the connector 1. Reinsert the connector. 2. Check continuity within the connector wire. If none, replace the wire. PF drive motor 3 and PF main PWB (YC6) Drive transmission system for the PF drive motor 1. Check if the rollers and gears rotate smoothly. If not, clean or grease the bushes and gears. 2. Replace the gears, if damaged. PF drive motor Replace the PF drive motor 3. PF main PWB Replace the PF main PWB. |
Error code: | 2630 |
Description: | Paper feed motor error (bottom) The notification that was received, the motor clock sensor cannot detect the revolution of the paper feed motor of the optional paper feeder (third). |
Causes: | Defective paper feeder. Defective engine controller PWB (A0004). |
Remedy: | Defective paper feeder. Refer to the paper feeder`s service manual. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). |
Error code: | 5301 |
Description: | Broken cleaning lamp K wire When the cleaning lamp K is driven, the lamp over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals. |
Causes: | Defective connector cable or poor contact in the connector. Defective cleaning lamp K. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Drum unit K and Drum relay PWB (YC2) Drum relay PWB (YC1) and engine PWB (YC34) Defective cleaning lamp K. Replace the drum unit K. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 5302 |
Description: | Broken cleaning lamp C wire When the cleaning lamp C is driven, the lamp over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals. |
Causes: | Defective connector cable or poor contact in the connector. Defective cleaning lamp C. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Drum unit C and Drum relay PWB (YC4) Drum relay PWB (YC1) and engine PWB (YC34) Defective cleaning lamp C. Replace the drum unit C. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 5303 |
Description: | Broken cleaning lamp M wire When the cleaning lamp M is driven, the lamp over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals. |
Causes: | Defective connector cable or poor contact in the connector. Defective cleaning lamp M. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Drum unit M and Drum relay PWB (YC3) Drum relay PWB (YC1) and engine PWB (YC34) Defective cleaning lamp M. Replace the drum unit M. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 5304 |
Description: | Broken cleaning lamp Y wire When the cleaning lamp Y is driven, the lamp over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals. |
Causes: | Defective connector cable or poor contact in the connector. Defective cleaning lamp Y. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Drum unit Y and Drum relay PWB (YC5) Drum relay PWB (YC1) and engine PWB (YC34) Defective cleaning lamp Y. Replace the drum unit Y. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 6000 |
Description: | Broken fuser heater wire Fuser thermistor 1 does not reach 100° C/212 °F even after 30 s during warming up. The detected temperature of fuser thermistor 1 does not reach the specified temperature (ready indication temperature) for 420 s in warming up after reached to 100° C/212 °F. |
Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Power source PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Power source PWB (YC3) and fuser heater PWB (YC3) Fuser heater PWB (YC2) and feed PWB 1 (YC27) Feed PWB 1 (YC1) and Engine PWB (YC6) Fuser heater 1. Replace the fuser unit. |
Error code: | 6020 |
Description: | Abnormally high fuser thermistor 1 temperature Fuser thermistor 1 detects a temperature higher than 240°C/464°F for 1 s. |
Causes: | Deformed connector pin. Defective triac. Shorted fuser thermistor 1. Defective engine PWB. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 6030 |
Description: | Broken fuser thermistor 1 wire Input from fuser center thermistor 1 is 1010 or more (A/D value) continuously for 1 s. Verify if A/D read in the differential output won’t change by 4 or more when it was turned on for 10 seconds in a lowtemperature environment. |
Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 1 wire. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Fuser thermistor 1 1. Replace the Fuser unit. Fuser thermostat (triggered) 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and fuser heater PWB (YC1) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. |
Error code: | 6100 |
Description: | Broken fuser heater wire Fuser thermistor 5 won’t reach the reference temperature in 480 s after shifting to low power mode. |
Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 5 wire. Defective engine PWB. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 6120 |
Description: | Abnormally high fuser press thermistor 5 temperature Fuser press thermistor 5 detects a temperature higher than 190°C/ 374°F for 1 s. |
Causes: | Deformed connector pin. Defective triac. Shorted fuser thermistor 5. Defective engine PWB. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 6130 |
Description: | Broken fuser press thermistor 5 wire The input from the fuser press thermistor 5 has been less than 30°C/ 86°F (A/D: greater thann992) for 60 seconds continuously. |
Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 5 wire. Defective fuser IH. Defective engine PWB. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) Fuser IH PWB(YC4) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Fuser IH PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser IH PWB(YC4) and Engine PWB (YC26) 2. Replace the fuser IH PWB. Fuser IH unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser IH unit and Fuser IH PWB (YC9 and 10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the fuser IH unit. |
Error code: | 6400 |
Display: | No Belt Unit Open the Front Cover, pull out all Drum Units completely and install the Belt Unit. |
Description: | Zero-cross signal error While fuser heater ON/OFF control is performed, the zerocross signal is not input within 3 s. |
Causes: | Fuser unit. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser heater PWB (YC2) and feed PWB 1 (YC27) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the fuser heater PWB. |
Error code: | 7001 |
Description: | Toner motor error During the toner motor is driven, an event in which a locking was detected for 5 times in 200 ms intervals has occurred in 30 sets. |
Causes: | Defective connector cable or poor contact in the connector. Defective toner motor. Defective engine PWB. |
Remedy: | Toner container 1. Check that the spiral screw of the toner container can be rotated by the hand. 2. Check for broken gears and replace if any. Toner motor 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor. Screw sensor 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Screw sensor and Front PWB (YC5) Front PWB (YC2) and Engine PWB (YC7) 3. Replace the Screw sensor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7002 |
Description: | Toner motor C error During the toner motor is driven, an event in which a locking was detected for 5 times in 200 ms intervals has occurred in 30 sets. |
Causes: | Defective connector cable or poor contact in the connector. Defective screw sensor C. Defective toner motor C. Defective engine PWB. |
Remedy: | Toner container C 1. Check that the spiral screw of the toner container can be rotated by the hand. 2. Check for broken gears and replace if any. Toner motor C 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor C and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor C. Screw sensor C 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Screw sensor C and Engine PWB (YC27) 3. Replace the screw sensor C. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7003 |
Description: | Toner motor M error During the toner motor is driven, an event in which a locking was detected for 5 times in 200 ms intervals has occurred in 30 sets. |
Causes: | Defective connector cable or poor contact in the connector. Defective screw sensor M. Defective toner motor M. Defective engine PWB. |
Remedy: | Toner container M 1. Check that the spiral screw of the toner container can be rotated by the hand. 2. Check for broken gears and replace if any. Toner motor M 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor M and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor M. Screw sensor M 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Screw sensor M and Engine PWB (YC27) 3. Replace the screw sensor M. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7004 |
Description: | Toner motor Y error During the toner motor is driven, an event in which a locking was detected for 5 times in 200 ms intervals has occurred in 30 sets. |
Causes: | Defective connector cable or poor contact in the connector. Defective screw sensor Y. Defective toner motor Y. Defective engine PWB. |
Remedy: | Toner container Y 1. Check that the spiral screw of the toner container can be rotated by the hand. 1. Check for broken gears and replace if any. Toner motor Y 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor Y and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor Y. Screw sensor Y 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Screw sensor Y and Engine PWB (YC27) 3. Replace the screw sensor Y. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7401 |
Description: | Developer unit type mismatch error Improper adaptation of the machine and developer unit is detected. |
Causes: | Defective connector cable or poor contact in the connector. Different type of the developer unit is installed. |
Remedy: | Different type of the developer unit is installed. Install the developer unit of the correct type. Developer unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer unit and Front PWB (YC7) Front PWB (YC2) and Engine PWB (YC8) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. |
Error code: | 7402 |
Description: | Developer unit C type mismatch error Absence of the developer unit C is detected. |
Causes: | Defective connector cable or poor contact in the connector. Different type of the developer unit is installed. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit C and front PWB (YC13) Front PWB (YC2) and engine PWB (YC10) Different type of the developer unit is installed. Install the correct developer unit. |
Error code: | 7403 |
Description: | Developer unit M type mismatch error Absence of the developer unit M is detected. |
Causes: | Defective connector cable or poor contact in the connector Different type of the developer unit is installed |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit M and front PWB (YC11) Front PWB (YC2) and engine PWB (YC10) Different type of the developer unit is installed. Install the correct developer unit. |
Error code: | 7404 |
Description: | Developer unit Y type mismatch error Absence of the developer unit Y is detected. |
Causes: | Defective connector cable or poor contact in the connector. Different type of the developer unit is installed. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit Y and front PWB (YC15) Front PWB (YC2) and engine PWB (YC10) Different type of the developer unit is installed. Install the correct developer unit. |
Error code: | 7411 |
Description: | Drum unit type mismatch error Improper adaptation of the machine and developer unit is detected. |
Causes: | Defective connector cable or poor contact in the connector. Different type of the drum unit is installed. |
Remedy: | Different type of the drum unit is installed. Install the drum unit of the correct type. Drum unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Drum unit and Front PWB (YC6) Front PWB (YC2) and Engine PWB (YC8) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. |
Error code: | 7412 |
Description: | Drum unit type Mismatch error (Cyan) Improper adaptation of the main unit and drum unit is detected. |
Causes: | Drum unit C |
Remedy: | Drum unit 1. Check if the drum unit of different models is attached, and replace it to the correct one. 2. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. Drum unit - Drum/Developer relay PWB Drum/Developer relay PWB - Engine PWB(YC6) 3. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. Drum/developer relay PWB Replace the drum/developer relay PWB Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB. |
Error code: | 7413 |
Description: | Drum unit type Mismatch error (Magenta) Improper adaptation of the main unit and drum unit is detected. |
Causes: | Drum unit M |
Remedy: | Drum unit 1. Check if the drum unit of different models is attached, and replace it to the correct one. 2. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. Drum unit - Drum/Developer relay PWB Drum/Developer relay PWB - Engine PWB(YC6) 3. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. Drum/developer relay PWB Replace the drum/developer relay PWB Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB. |
Error code: | 7414 |
Description: | Drum unit type Mismatch error (Yellow) Improper adaptation of the main unit and drum unit is detected. |
Causes: | Drum unit Y |
Remedy: | Drum unit 1. Check if the drum unit of different models is attached, and replace it to the correct one. 2. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. Drum unit - Drum/Developer relay PWB Drum/Developer relay PWB - Engine PWB(YC6) 3. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. Drum/developer relay PWB Replace the drum/developer relay PWB Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB. |
Error code: | 7600 |
Description: | Toner ID sensor error The detection signal of the toner ID sensor was abnormal value. |
Causes: | Defective toner ID sensor. Defective engine controller PWB (A0004). Defective harness (S03195) between engine controller PWB (A0004) and toner ID sensor or poor contact of the connector terminals. |
Remedy: | Defective toner ID sensor. Replace the toner ID sensor. Defective engine controller PWB (A0004). Replace the engine controller PWB (A0004). Defective harness (S03195) between engine controller PWB (A0004) and toner ID sensor or poor contact of the connector terminals. Check the continuity of the harness (S03195), check the connection YC11 connector of the engine controller PWB (A0004), if there is trouble, remedy or replace. |
Error code: | 9530 |
Description: | Machine No.backup error C |
Causes: | IPU PWB error |
Remedy: | Contact the Service Administrative Division. |
Error code: | D020 |
Description: | Engine firmware error Serious status inconsistency that is fatal to keep controlling in the engine firmware is detected. |
Causes: | Malfunction of the engine firmware or defective engine firmware. |
Remedy: | Turn the power off/on to restart the printer. If the error is not resolved, check the update information on the engine firmware. Update the engine firmware as needed. |
Error code: | F000 |
Description: | Communication error between the main unit and CPU |
Causes: | The panel cannot be detected since the CPU communication between the main PWB and the operation panel main PWB is unavailable. |
Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 3 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. 5 Replacing the operation panel main PWB The operation panel main PWB is faulty. Replace the panel main PWB. |
Error code: | F020 |
Description: | System memory error (RAM reading/writing error or CPU memory error) |
Causes: | The error appears during the reading/writing check of the RAM for the CPU when the main unit starts up. |
Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 3 Checking the main PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the main PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the main PWB. |
Error code: | F030 |
Description: | Main PWB system error |
Causes: | Defective main PWB. |
Remedy: | Defective main PWB. Replace the main PWB and check for correct operation. |
Error code: | F040 |
Description: | Option installation error |
Causes: | The size of the attached main memory is 2 GB when the DSDF is installed. |
Remedy: | Main memory Replace the main memory with a 4 GB one. DSDF • Remove the DSDF. • Replace the DSDF with an RADF. |
Error code: | F226 |
Description: | VIDEO output error |
Causes: | Defective main PWB. |
Remedy: | Defective main PWB. Replace the main PWB and check for correct operation. |
Парткод
Название
Kyocera Блок фотобарабана
Kyocera Блок проявки голубой
Kyocera Блок проявки черный
Kyocera Блок проявки пурпурный
Kyocera Блок проявки желтый
Kyocera Узел термозакрепления 230v в сборе
Kyocera Главный коротрон
Kyocera Сервисный комплект
Kyocera Тонер-картридж голубой
Kyocera Тонер-картридж черный
Kyocera Тонер-картридж пурпурный
Kyocera Тонер-картридж желтый