Kyocera FS-C8100DN
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
120000
Скорость печати
A4
32
Цветность печати
цветная
Общие характеристики |
|
---|---|
Сканер |
|
Печать фотографий |
|
Копир |
|
Факс |
|
Телефон |
|
Макс. формат |
A3 |
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Область применения |
большой офис |
Число страниц в месяц |
120 000 |
Цветность печати |
цветная |
Тип устройства |
Принтер |
Принтер |
|
Пигментные чернила |
|
Печать без полей |
|
Двусторонняя печать |
|
Прямая печать |
|
Количество цветов |
4 |
Время разогрева |
45 |
Макс, разрешение для ч/б печати |
|
По X | 600 |
По Y | 600 |
Скорость ч/б печати |
|
A4 | 32 |
A3 | 16 |
Время выхода первого отпечатка |
|
Цветн, | 7,9 |
Ч/б | 5,9 |
Сканер |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Отправка изображения по e-mail |
|
Расходные материалы |
|
Количество картриджей |
4 |
Ресурс ч/б картриджа/тонера |
15 000 |
Ресурс цветного картриджа/тонера |
7 000 |
Печать на: |
|
Конвертах | |
Матовой бумаге | |
Пленках | |
Карточках | |
Этикетках | |
Глянцевой бумаге | |
Фотобумаге | |
Рулоне | |
CD/DVD | |
Плотность бумаги |
|
Минимальная | 64 |
Максимальная | 220 |
Факс |
|
Цветной |
|
Телефон |
|
Спикерфон |
|
Стандарт DECT |
|
Автоответчик |
|
Caller ID |
|
АОН |
|
Проводная трубка |
|
Беспроводная трубка |
|
Шрифты и языки управления |
|
Языки управления |
|
PPDS | |
PostScript 2 | |
PCL 5e | |
PCL 6 | |
PCL 5c | |
PostScript 3 | |
PostScript | |
Количество установленных шрифтов |
|
PCL | 80 |
Лотки |
|
Подача бумаги |
|
Стандартная | 1 100 |
Максимальная | 4 100 |
Вывод бумаги |
|
Стандартный | 500 |
Финишер |
|
Сортер |
|
Электронная сортировка |
|
Интерфейсы |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
RS-232 |
|
Инфракрасный порт |
|
Bluetooth |
|
Устройство для чтения карт памяти |
|
USB |
|
Ethernet (RJ-45) |
|
LPT |
|
Версия USB |
2,0 |
Количество свободных слотов расширения |
1 |
Поддержка карт памяти |
|
CompactFlash | |
Память/Процессор |
|
Объем памяти |
256 |
Макс, объем памяти |
1 024 |
Частота процессора |
800 |
Процессор |
PowerPC 750GL |
Дополнительная информация |
|
Мин. системные требования |
|
Поддержка ОС |
|
Linux | |
DOS | |
Windows | |
Mac OS | |
Потребляемая мощность |
|
При работе | 840 |
В режиме ожидания | 210 |
Уровень шума |
|
При работе | 54 |
В режиме ожидания | 44 |
Габариты |
|
Ширина |
605 |
Глубина |
670 |
Высота |
680 |
Вес |
87 |
Модули
Primary Unit
COVERS
Frames I
Cooling Unit
Electrical Components II
Controller Box
Paper Cassette II
Fuser Unit & LSU
Driving Unit I
Imaging Unit
MPT Assy
FRAME L
Table Bypass
TRANSFER UNIT
Frames II
Paper Cassette I
MPT Bypass Assy
Options
CASSETTE ASSEMBLY
Paper Conveying II
Electrical Components I
Driving Unit II
Paper Conveying I
Developer unit
Paper Conveying III
Paper exit
Детали
Деталь: | PULLEY,PAPER FEED |
Парткод: | 2AR07220 |
Цена: | 1 600 ₽ |
Деталь: | PULLEY,SEPARATION |
Парткод: | 2AR07230 |
Цена: | 360 ₽ |
Деталь: | GUIDE FILM,SEPARATION PULLEY |
Парткод: | 2AR07660 |
Деталь: | BUSHING 6,REGISTRATION |
Парткод: | 2BC06520 |
Деталь: | PULLEY FEED A |
Парткод: | 2BJ06010 |
Цена: | 250 ₽ |
Деталь: | PLATE LEADING FEED |
Парткод: | 2BL07900 |
Деталь: | SHAFT,PAPER FEED |
Парткод: | 302AR07251 |
Деталь: | SHAFT,LEADING FEED |
Парткод: | 302AR07271 |
Деталь: | UPPER HOUSING,PAPER FEED |
Парткод: | 302FG07251 |
Деталь: | LOWER HOUSING,PAPER FEED |
Парткод: | 302FG07260 |
Деталь: | ACTUATOR,PAPER EMPTY |
Парткод: | 302FG07290 |
Деталь: | HOLDER,ACTUATOR |
Парткод: | 302FG07300 |
Деталь: | REINFORCEMENT PRIMARY PAPER FEED |
Парткод: | 302FG07310 |
Деталь: | GROUND PLATE,PRIMARY PAPER FEED |
Парткод: | 302FG07330 |
Деталь: | HOLDER PICK |
Парткод: | 302GR06060 |
Деталь: | SUPPORT PLATE FEED |
Парткод: | 302GR06070 |
Деталь: | SPRING PICK |
Парткод: | 302GR06080 |
Деталь: | SPRING SEPARATION |
Парткод: | 302GR06091 |
Деталь: | SHAFT SEPARATION |
Парткод: | 302GR06101 |
Деталь: | TORQUE LIMITER 360 |
Парткод: | 302GR06110 |
Деталь: | LEVER SEPARATION RELEASE |
Парткод: | 302GR06201 |
Деталь: | WIRE PRIMARY FEED UNIT1 |
Парткод: | 302GR46430 |
Деталь: | GEAR 16,PAPER FEED |
Парткод: | 33906160 |
Деталь: | LOWER BUSHING,PAPER FEED |
Парткод: | 34806040 |
Деталь: | GEAR 15 |
Парткод: | 34922420 |
Деталь: | PT.SENSOR GP1A73AJ00/ BK |
Парткод: | 5FNXGP1A73A++02 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | CONNECTOR |
Парткод: | 7YCC08B2046+H01 |
Деталь: | PARTS FE-820 |
Парткод: | 302FZ93321 |
Деталь: | COVER INNER RIGHT |
Парткод: | 302FZ04200 |
Деталь: | BRUSH CLEANER |
Парткод: | 2BL16220 |
Деталь: | COVER INNER LEFT |
Парткод: | 302FZ04210 |
Деталь: | SHEET HARNESS LEFT |
Парткод: | 302FZ04640 |
Деталь: | LABEL SEP CLEANING |
Парткод: | 302GR34181 |
Деталь: | SWITCH,SIZE |
Парткод: | 35927420 |
Деталь: | MAGNET CATCH |
Парткод: | 60804120 |
Деталь: | SENSOR HUMIDITY |
Парткод: | 2FB27060 |
Деталь: | SPACER SENSOR |
Парткод: | 302FZ04730 |
Деталь: | COVER RIGHT TOP |
Парткод: | 302HP04010 |
Деталь: | COVER TOP |
Парткод: | 302HP04060 |
Деталь: | COVER REAR TOP |
Парткод: | 302HP04020 |
Деталь: | COVER LEFT FRONT TOP |
Парткод: | 302FZ04430 |
Деталь: | COVER LEFT REAR TOP |
Парткод: | 302FZ04440 |
Деталь: | CUT WASHER 4 |
Парткод: | 2BG22990 |
Деталь: | COVER LEFT REAR |
Парткод: | 302FZ04160 |
Деталь: | LID COVER LEFT |
Парткод: | 302FZ04240 |
Деталь: | SPRING COVER R /40283V0069 A4 |
Парткод: | 5MMW261SD004 |
Деталь: | LOCK COVER R /40283V0068 A4 |
Парткод: | 5MVX421DN003 |
Деталь: | COVER LEFT FRONT |
Парткод: | 302FZ04150 |
Деталь: | COVER EXIT |
Парткод: | 302HP04080 |
Деталь: | EARTH PUSH SWITCH |
Парткод: | 302HP04140 |
Деталь: | STOPPER PAPER |
Парткод: | 302HP04160 |
Деталь: | EMBLEM LOGO |
Парткод: | 302FZ04480 |
Деталь: | SHEET EMBLEM |
Парткод: | 302FZ04610 |
Деталь: | COVER EMBLEM(UT) |
Парткод: | 302FZ60140 |
Деталь: | COVER RIGHT |
Парткод: | 302FZ04060 |
Деталь: | COVER RIGHT MID A |
Парткод: | 302FZ04071 |
Деталь: | COVER FILTER ASSY |
Парткод: | 302FZ00470 |
Деталь: | COVER FRONT SIDE LOW |
Парткод: | 302FZ04110 |
Деталь: | COVER LEFT FRONT |
Парткод: | 302HP04030 |
Деталь: | LABEL JAM FUSER |
Парткод: | 302HP34031 |
Деталь: | COVER LEFT TOP |
Парткод: | 302HP04050 |
Деталь: | PLATE MAGNET |
Парткод: | 302FZ04250 |
Деталь: | COVER FRONT SIDE MID |
Парткод: | 302FZ04120 |
Деталь: | PLATE MAGCHATCH |
Парткод: | 5MMS626SD003 |
Деталь: | STRAP COVER FRONT |
Парткод: | 302FZ04490 |
Деталь: | FILTER DUCT PU |
Парткод: | 302FZ33240 |
Деталь: | COVER CF |
Парткод: | 303JT39020 |
Деталь: | COVER REAR |
Парткод: | 302HP04070 |
Деталь: | LABEL BOARD SET |
Парткод: | 302FZ34270 |
Деталь: | COVER REAR MOTOR |
Парткод: | 302FZ04881 |
Деталь: | LID SHIELD BOX |
Парткод: | 302FZ39640 |
Деталь: | COVER FILTER DUCT PU |
Парткод: | 302FZ33250 |
Деталь: | LABEL CONTAINER T1 |
Парткод: | 4AK73740 |
Деталь: | LABEL CONTAINER T2 |
Парткод: | 4AK73750 |
Деталь: | LABEL CONTAINER T3 |
Парткод: | 4AK73760 |
Деталь: | LABEL CONTAINER T4 |
Парткод: | 4AK73770 |
Деталь: | COVER LEFT MIDDLE |
Парткод: | 302HP04040 |
Деталь: | COVER OPERATION |
Парткод: | 302HP05010 |
Деталь: | COVER FRONT |
Парткод: | 302FZ04010 |
Деталь: | CUSHION COVER FRONT |
Парткод: | 302FZ04710 |
Деталь: | LABEL CONTAINER |
Парткод: | 302FZ34230 |
Деталь: | LABEL CONTAINER OPE A |
Парткод: | 302FZ34250 |
Деталь: | LABEL CONTAINER OPE E |
Парткод: | 302FZ34260 |
Деталь: | LABEL ENERGY STAR |
Парткод: | 302G634070 |
Деталь: | COVER INNER LEFT ASSY |
Парткод: | 302FZ00440 |
Деталь: | COVER LEFT REAR ASSY |
Парткод: | 302FZ00450 |
Деталь: | COVER LEFT FRONT ASSY |
Парткод: | 302FZ00460 |
Деталь: | PARTS,OPERATION ASSY FS,SP |
Парткод: | 302HP93020 |
Деталь: | FORNT COVER A ASSY SP |
Парткод: | 302FZ80070 |
Деталь: | FORNT COVER E ASSY SP |
Парткод: | 302FZ80080 |
Деталь: | ACCESS.BUSHING |
Парткод: | 7YZM110004++H01 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610008++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210003++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610002++H01 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210002++H01 |
Деталь: | RAIL IMAGE REAR |
Парткод: | 302FZ02160 |
Деталь: | STOPPER IMAGE UNIT R |
Парткод: | 302FZ02290 |
Деталь: | SPRING STOPPER |
Парткод: | 302FZ02300 |
Деталь: | PAD WIRE A |
Парткод: | 302FZ39890 |
Деталь: | THERMISTOR |
Парткод: | 302FZ45120 |
Деталь: | CONNECTOR |
Парткод: | 7YCC02B1001+H01 |
Деталь: | RAIL IMAGE FRONT |
Парткод: | 302FZ02150 |
Деталь: | STOPPER IMAGE UNIT F |
Парткод: | 302FZ02280 |
Деталь: | WIRE ID SENSOR |
Парткод: | 302FZ46040 |
Деталь: | HOOK DLP |
Парткод: | 302FZ02591 |
Деталь: | FELT TC CLN |
Парткод: | 2BG16590 |
Деталь: | RAIL DRUM LEFT |
Парткод: | 302FZ02170 |
Деталь: | SHUTTER ID SENSOR |
Парткод: | 302FZ02190 |
Деталь: | SPRING SHUTTER ID SENSOR |
Парткод: | 302FZ02200 |
Деталь: | GUIDE TC R |
Парткод: | 302FZ02710 |
Деталь: | PLATE ID SENSOR |
Парткод: | 302FZ02770 |
Деталь: | SHEET ID SENSOR |
Парткод: | 302FZ02780 |
Деталь: | SHEET TRANSFER R |
Парткод: | 302FZ24020 |
Деталь: | ID SENSOR |
Парткод: | 302FZ45080 |
Деталь: | WIRE ID SENSOR UNIT |
Парткод: | 302FZ46321 |
Деталь: | BRACKET MPT GEAR |
Парткод: | 302FZ07500 |
Деталь: | GEAR JOINT MPT |
Парткод: | 302FZ07510 |
Деталь: | STOPPER 5 |
Парткод: | 2BC06980 |
Деталь: | PRINTED W. BOARD TONER FULL ASSY |
Парткод: | 302FZ01280 |
Деталь: | RETAINER PU |
Парткод: | 302FZ02120 |
Деталь: | LEVER RETAINER |
Парткод: | 302FZ02410 |
Деталь: | SPRING RETAINER |
Парткод: | 302FZ02420 |
Деталь: | SHAFT SWEEP DRIVE |
Парткод: | 302FZ02810 |
Деталь: | GEAR SWEEP Z15 |
Парткод: | 302FZ02820 |
Деталь: | GEAR SWEEP Z23 |
Парткод: | 302FZ02830 |
Деталь: | GEAR SWEEP Z49 Z24 |
Парткод: | 302FZ02840 |
Деталь: | GEAR SWEEP Z28 |
Парткод: | 302FZ02850 |
Деталь: | SHAFT FEED SWEEP |
Парткод: | 302FZ02860 |
Деталь: | GEAR SWEEP Z20 |
Парткод: | 302FZ02870 |
Деталь: | PLATE DRUM EARTH |
Парткод: | 302FZ02900 |
Деталь: | TAPE RETAINER |
Парткод: | 302FZ02910 |
Деталь: | SHEET TRAY CL |
Парткод: | 302FZ02920 |
Деталь: | SHEET TRAY BK |
Парткод: | 302FZ02930 |
Деталь: | COVER INNER MIDDLE |
Парткод: | 302FZ04510 |
Деталь: | TRAY CONTAINER Y |
Парткод: | 302FZ04540 |
Деталь: | TRAY CONTAINER BK |
Парткод: | 302FZ04550 |
Деталь: | COVER FULL SENSOR |
Парткод: | 302FZ04571 |
Деталь: | TRAY CONTAINER M |
Парткод: | 302FZ04590 |
Деталь: | TRAY CONTAINER C |
Парткод: | 302FZ04600 |
Деталь: | LEVER LOCK WASTE |
Парткод: | 302FZ04780 |
Деталь: | SPRING LOCK WASTE |
Парткод: | 302FZ04790 |
Деталь: | SEAL TRAY BK |
Парткод: | 302FZ04890 |
Деталь: | SEAL TRAY Y |
Парткод: | 302FZ04900 |
Деталь: | SEAL TRAY C |
Парткод: | 302FZ04910 |
Деталь: | SEAL TRAY M |
Парткод: | 302FZ04920 |
Деталь: | TRAY WASTE |
Парткод: | 302FZ04940 |
Деталь: | SPONGE TRAY WASTE |
Парткод: | 302FZ04950 |
Деталь: | WIRE WASTE TONER SENSOR |
Парткод: | 302FZ46310 |
Деталь: | WIRE TONER SENSOR JOINT |
Парткод: | 302FZ46710 |
Деталь: | BUSHING 6 |
Парткод: | 3CY07080 |
Деталь: | PLATE WASTE SENSOR /A-80 A3 |
Парткод: | 5MMX321LD039 |
Деталь: | SPACER LED /43587J2063 A4 |
Парткод: | 5MVS313SB002 |
Деталь: | TRANSISTOR PHOTO PT491FE0000F |
Парткод: | 7QPPT491F+++H01 |
Деталь: | STOPPER CONTAINER PF |
Парткод: | 302HP02170 |
Деталь: | STOPPER CONTAINER PE |
Парткод: | 302HP02150 |
Деталь: | STOPPER CONTAINER BK PF |
Парткод: | 302HP02180 |
Деталь: | STOPPER CONTAINER BK PE |
Парткод: | 302HP02160 |
Деталь: | PARTS,ID SENSOR ASSY SP |
Парткод: | 302FZ94330 |
Деталь: | PARTS MPT JOINT ASSY |
Парткод: | 302FZ93230 |
Деталь: | RETAINER PU ASSY |
Парткод: | 302FZ00531 |
Деталь: | PARTS CONT DRIVE ASSY |
Парткод: | 302FZ93290 |
Деталь: | PARTS ICL MOTOR ASSY |
Парткод: | 302FZ93460 |
Деталь: | COVER INNER UPPER |
Парткод: | 302FZ04520 |
Деталь: | MAGNET CATCH |
Парткод: | 60804120 |
Деталь: | PLATE DUCT EXIT |
Парткод: | 302FZ33370 |
Деталь: | SEAL BRACKET FAN C |
Парткод: | 302FZ33400 |
Деталь: | DUCT EXIT |
Парткод: | 302HP02030 |
Деталь: | CORE 8-16X10 |
Парткод: | 3HK27050 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610008++H01 |
Деталь: | LEVER LOCK CONT |
Парткод: | 302FZ04530 |
Деталь: | RFID RECIEVER |
Парткод: | 302FZ45060 |
Деталь: | COVER CONNECTER |
Парткод: | 302FZ04580 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610002++H01 |
Деталь: | FAN 80 COOLING |
Парткод: | 2FB27180 |
Деталь: | BRACKET FAN D |
Парткод: | 302FZ33230 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610003++H01 |
Деталь: | BRACKET FAN C |
Парткод: | 302FZ33190 |
Деталь: | PARTS,FAN COOLING CONVEYING SP |
Парткод: | 302FZ94420 |
Деталь: | MOUNT FAN |
Парткод: | 302FZ02640 |
Деталь: | PARTS,FAN COOLING DLP 70 SP |
Парткод: | 302FZ94380 |
Деталь: | BRACKET FAN A |
Парткод: | 302FZ33140 |
Деталь: | SEAL BRACKET FAN A |
Парткод: | 302FZ33170 |
Деталь: | SEAL BRACKET FAN B |
Парткод: | 302FZ33180 |
Деталь: | BRACKET FAN B |
Парткод: | 302FZ33150 |
Деталь: | WIRE FRONT SIDE |
Парткод: | 302FZ46091 |
Деталь: | FAN 60 COOLING |
Парткод: | 2FB27190 |
Деталь: | DUCT EXIT LOWER |
Парткод: | 302FZ33011 |
Деталь: | DUCT EXIT UPPER |
Парткод: | 302FZ33020 |
Деталь: | SEAL DUCT EXIT |
Парткод: | 302FZ33380 |
Деталь: | SEAL BRACKET FAN D |
Парткод: | 302FZ33410 |
Деталь: | BRACKET PWB RFID |
Парткод: | 302FZ02880 |
Деталь: | FAN 60 COOLING |
Парткод: | 2FB27190 |
Деталь: | SHIELD BOX |
Парткод: | 302FZ39051 |
Деталь: | BRACKET INLET |
Парткод: | 302FZ39550 |
Деталь: | LVU 100 |
Парткод: | 302FZ45010 |
Деталь: | LVU 200 |
Парткод: | 302FZ45020 |
Деталь: | WIRE CASSETTE HEATER |
Парткод: | 302FZ46430 |
Деталь: | WIRE INLET ASSY |
Парткод: | 302FZ46660 |
Деталь: | WIRE OP HEATER |
Парткод: | 302FZ46730 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210002++H01 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210003++H01 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210004++H01 |
Деталь: | ACCESS.SPACER |
Парткод: | 7YZM510007++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610003++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610004++H01 |
Деталь: | SHEET PS BOX |
Парткод: | 302FZ39940 |
Деталь: | SPRING HV TC1 |
Парткод: | 302FZ39540 |
Деталь: | TERMINAL TC1 |
Парткод: | 302FZ39570 |
Деталь: | HVU TRANSFER 1 |
Парткод: | 302FZ45041 |
Деталь: | MOUNT TRANSFER HV |
Парткод: | 302FZ39590 |
Деталь: | GUIDE WIRE LOWER |
Парткод: | 302FZ39870 |
Деталь: | WIRE HVU 2 |
Парткод: | 302FZ46120 |
Деталь: | LID VENDOR |
Парткод: | 302FB26290 |
Деталь: | MOUNT OPTION IF |
Парткод: | 302FZ39071 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610015++H01 |
Деталь: | WIRE OP DESK |
Парткод: | 302FZ46742 |
Деталь: | WIRE LVU ENGINE |
Парткод: | 302FZ46220 |
Деталь: | WIRE LVU CONTROLLER |
Парткод: | 302FZ46240 |
Деталь: | WIRE FUSER |
Парткод: | 302FZ46170 |
Деталь: | WIRE INTERLOCK SWITCH |
Парткод: | 302FZ46210 |
Деталь: | WIRE OPTION SIGNAL |
Парткод: | 302HP46080 |
Деталь: | SHEET WIRE LOWER |
Парткод: | 302FZ39880 |
Деталь: | PLATE MAIN SW |
Парткод: | 302FZ39731 |
Деталь: | WIRE MSW |
Парткод: | 302FZ46260 |
Деталь: | SW. SEESAW |
Парткод: | 7SC010101+++H01 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210006++H01 |
Деталь: | COVER TOP B |
Парткод: | 302HP04170 |
Деталь: | POWER CORD(120) |
Парткод: | 3019527401 |
Деталь: | POWER CORD(230) |
Парткод: | 2AR27800 |
Деталь: | POWER CODE AS(240) |
Парткод: | 3029927232 |
Деталь: | CONTROLLER BOX |
Парткод: | 302FZ39010 |
Деталь: | PARTS, PWB ENGINE ASSY,SP |
Парткод: | 302HP93100 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210004++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610003++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610005++H01 |
Деталь: | SHEET WIRE |
Парткод: | 302FZ39840 |
Деталь: | WIRE DRUM-DLP KY |
Парткод: | 302FZ46150 |
Деталь: | WIRE DRUM-DLP CM |
Парткод: | 302FZ46140 |
Деталь: | MEMORY MODULE |
Парткод: | 7NMDD256MA01H01 |
Деталь: | WIRE APC |
Парткод: | 302FZ46071 |
Деталь: | CORE 15-26X13 |
Парткод: | 2AV27440 |
Деталь: | SHIELD GASKET |
Парткод: | 7ZGSSTG31020H01 |
Деталь: | WIRE EXIT |
Парткод: | 302HP46020 |
Деталь: | COVER CONTROLLER |
Парткод: | 302FZ39020 |
Деталь: | FAN BOX COOLING |
Парткод: | 302FZ44040 |
Деталь: | GUIDE CF |
Парткод: | 2DA26520 |
Деталь: | PLATE OPTION |
Парткод: | 2DD26070 |
Деталь: | PLATE CONTROLLER |
Парткод: | 302FZ39060 |
Деталь: | SCREW OP / M3 X 8 CRFREE A4 |
Парткод: | 5MMT263SN012++R |
Деталь: | RAIL OPTION A /B-05 CONT BOX A2 |
Парткод: | 5MVB743SL004 |
Деталь: | RAIL OPTION B /B-05 CONT BOX A2 |
Парткод: | 5MVB743SL005 |
Деталь: | PARTS,PWB DIMM PRINTER ASSY,SP |
Парткод: | 302HP94020 |
Деталь: | WIRE PANNEL |
Парткод: | 302HP46010 |
Деталь: | PARTS,PRINTED W.BOARD CONTROL ASSY.SP |
Парткод: | 302HP93010 |
Деталь: | TERMINAL,PAPER SIZE DETECTION |
Парткод: | 2BC07860 |
Деталь: | PLATE NUMBER |
Парткод: | 2BL04310 |
Деталь: | PLATE NUMBER 2 |
Парткод: | 2BL04370 |
Деталь: | CUT WASHER 5 |
Парткод: | 2C904550 |
Деталь: | PIN CURSOR |
Парткод: | 2FB07050 |
Деталь: | SPRING CURSOR |
Парткод: | 2FB07060 |
Деталь: | SIZE DETECTION ASSY |
Парткод: | 2FG01020 |
Деталь: | SHAFT, WORK PLATE |
Парткод: | 302AR07041 |
Деталь: | WORK PLATE,LIFT CASSETTE |
Парткод: | 302BC06091 |
Деталь: | PLATE SIZE C |
Парткод: | 302FB05200 |
Деталь: | PLATE SIZE IN |
Парткод: | 302FB05210 |
Деталь: | LEVER CURSOR A |
Парткод: | 302FB07032 |
Деталь: | LEVER CURSOR B |
Парткод: | 302FB07042 |
Деталь: | ADJUSTING PLATE CASSETTE |
Парткод: | 302FB07340 |
Деталь: | PIN CASSETTE |
Парткод: | 302FB07420 |
Деталь: | BASE CASSETTE |
Парткод: | 302FG07091 |
Деталь: | CURSOR C CASSETTE |
Парткод: | 302FG07151 |
Деталь: | FRONT GUIDE C,CURSOR |
Парткод: | 302FG07170 |
Деталь: | REAR GUIDE C,CURSOR |
Парткод: | 302FG07180 |
Деталь: | GROUND PLATE,CASSETTE |
Парткод: | 302FG07200 |
Деталь: | STOPPER,TRAILING EDGE DETECTION |
Парткод: | 302FG07230 |
Деталь: | CASSETTE |
Парткод: | 302GR09011 |
Деталь: | HANDLE CASSETTE 1 |
Парткод: | 302GR09020 |
Деталь: | COVER CASSETTE |
Парткод: | 302GR09030 |
Деталь: | HANDLE CASSETTE 2 |
Парткод: | 302GR09040 |
Деталь: | LEVER CASSETTE |
Парткод: | 302GR09051 |
Деталь: | RAIL CURSOR R |
Парткод: | 302GR09060 |
Деталь: | LID PAPER SIZE |
Парткод: | 302GR09070 |
Деталь: | RAIL CURSOR A |
Парткод: | 302GR09080 |
Деталь: | Support Plate |
Парткод: | 302GR09090 |
Деталь: | FRONT CURSOR CASSETTE |
Парткод: | 302GR09102 |
Деталь: | REAR CURSOR CASSETTE |
Парткод: | 302GR09112 |
Деталь: | SPRING LEVER CASSETTE |
Парткод: | 302GR09120 |
Деталь: | SHAFT PULLEY |
Парткод: | 302GR09130 |
Деталь: | SHAFT HANDLE |
Парткод: | 302GR09140 |
Деталь: | WORK PLATE HANDLE |
Парткод: | 302GR09150 |
Деталь: | STOPPER PAPER |
Парткод: | 302GR09160 |
Деталь: | PLATE SIZE INCH |
Парткод: | 302GR09201 |
Деталь: | SEAL DETECTION PLATE |
Парткод: | 302GR09210 |
Деталь: | LIFT LOCK |
Парткод: | 302GR09990 |
Деталь: | LABEL CASSETTE OPERATION |
Парткод: | 302GR34011 |
Деталь: | LABEL PAPER SIZE |
Парткод: | 302GR34022 |
Деталь: | LABEL PAPER SIZE R |
Парткод: | 302GR34032 |
Деталь: | WIRE CASSETTE UNIT |
Парткод: | 302GR46450 |
Деталь: | DETECTION PLATE,PAPER SIZE |
Парткод: | 33907170 |
Деталь: | CUSHION,CASSETTE WORK PLATE |
Парткод: | 33907210 |
Деталь: | PULLEY,CASSETTE |
Парткод: | 34907150 |
Деталь: | PLATE NUMBER4 |
Парткод: | 3CF04060 |
Деталь: | RETAINER M4 |
Парткод: | 3CY06030 |
Деталь: | RACK CURSOR |
Парткод: | 3CY06090 |
Деталь: | GEAR 20,CURSOR |
Парткод: | 3CY06100 |
Деталь: | PLATE NUMBER 3 /3CF0405 A4 |
Парткод: | 5MVX321CE001 |
Деталь: | CUSHION,CASSETTE R |
Парткод: | 60907170 |
Деталь: | LABEL,PAPER UPPER LIMIT |
Парткод: | 61705110 |
Деталь: | SPRING, PAD |
Парткод: | 66106080 |
Деталь: | PAD,CASSETTE |
Парткод: | 66107100 |
Деталь: | CONNECTOR |
Парткод: | 7YCC08B2046+H01 |
Деталь: | CT-710 |
Парткод: | 302GR93082 |
Деталь: | PARTS FUSER 120 ASSY(PR) |
Парткод: | 302HP93160 |
Деталь: | PARTS FUSER 200 ASSY(PR) |
Парткод: | 302HP93170 |
Деталь: | MOUNT LSU RIGHT |
Парткод: | 302FZ02540 |
Деталь: | SHEET BAND TUBE |
Парткод: | 302FZ03020 |
Деталь: | JOINT TUBE |
Парткод: | 302FZ33090 |
Деталь: | SPRING LSU |
Парткод: | 302FZ20040 |
Деталь: | PIN LSU |
Парткод: | 302FZ20030 |
Деталь: | PARTS LSU ASSY |
Парткод: | 302FZ93080 |
Деталь: | PARTS,MOTOR IMAGE SP |
Парткод: | 302FZ94250 |
Деталь: | PLATE DRIVE TC |
Парткод: | 302FZ31150 |
Деталь: | GEAR Z84L Z30L TC |
Парткод: | 302FZ31560 |
Деталь: | CLUTCH REGIST 8 |
Парткод: | 302FZ31810 |
Деталь: | STOPPER 5 |
Парткод: | 2BC06980 |
Деталь: | WIRE REG CLT JOINT |
Парткод: | 302FZ46761 |
Деталь: | MOTOR LIFT |
Парткод: | 302GR44111 |
Деталь: | BUSHING 8 |
Парткод: | 2BC06510 |
Деталь: | SPRING COUPLING DLP |
Парткод: | 2BG22530 |
Деталь: | PARTS,PWB MOTOR DRIVER ASSY,SP |
Парткод: | 302FZ94670 |
Деталь: | MOTOR DLP |
Парткод: | 302FZ31030 |
Деталь: | HOLDER DRUM DRIVE |
Парткод: | 302FZ31080 |
Деталь: | PLATE DRUM DRIVE |
Парткод: | 302FZ31092 |
Деталь: | SHAFT DLP DRIVE |
Парткод: | 302FZ31180 |
Деталь: | SHAFT CLN DRIVE |
Парткод: | 302FZ31190 |
Деталь: | COUPLING DLP DRIVE |
Парткод: | 302FZ31250 |
Деталь: | COLLAR DLP COUPLING |
Парткод: | 302FZ31280 |
Деталь: | GEAR Z22L DLP |
Парткод: | 302FZ31330 |
Деталь: | GEAR Z24R |
Парткод: | 302FZ31340 |
Деталь: | GEAR Z22R |
Парткод: | 302FZ31350 |
Деталь: | GEAR Z50L |
Парткод: | 302FZ31360 |
Деталь: | GEAR Z52R |
Парткод: | 302FZ31370 |
Деталь: | GEAR Z55L |
Парткод: | 302FZ31380 |
Деталь: | GEAR Z60L |
Парткод: | 302FZ31390 |
Деталь: | GEAR Z54L-Z26L |
Парткод: | 302FZ31400 |
Деталь: | GEAR Z42R-Z29R |
Парткод: | 302FZ31410 |
Деталь: | GEAR Z28R |
Парткод: | 302FZ31600 |
Деталь: | PIN MAIN DRIVE |
Парткод: | 302FZ31720 |
Деталь: | GEAR Z22L CLN |
Парткод: | 302FZ31850 |
Деталь: | GEAR Z35L DLP |
Парткод: | 302FZ31890 |
Деталь: | GEAR Z60L CLN |
Парткод: | 302FZ31900 |
Деталь: | HOLDER DRUM MOTOR |
Парткод: | 302FZ32050 |
Деталь: | SHEET DLP MOTOR |
Парткод: | 302FZ39800 |
Деталь: | SHEET MAIN DRIVE R |
Парткод: | 302FZ39960 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610004++H01 |
Деталь: | BUSH 6 |
Парткод: | 2BG22960 |
Деталь: | PLATE MPF DRIVE |
Парткод: | 302FZ31100 |
Деталь: | HOLDER MPF DRIVE |
Парткод: | 302FZ31110 |
Деталь: | GEAR Z98L-Z40R MPF |
Парткод: | 302FZ31140 |
Деталь: | SHAFT MPF CL |
Парткод: | 302FZ31160 |
Деталь: | SHAFT BYPASS DRIVE |
Парткод: | 302FZ31220 |
Деталь: | SHAFT BRS DRIVE |
Парткод: | 302FZ31230 |
Деталь: | GEAR Z94L-Z32L MPF |
Парткод: | 302FZ31290 |
Деталь: | GEAR Z38R MPF |
Парткод: | 302FZ31300 |
Деталь: | GEAR Z24R BRS |
Парткод: | 302FZ31310 |
Деталь: | GEAR Z20S BRS |
Парткод: | 302FZ31320 |
Деталь: | GEAR Z26L BYPASS |
Парткод: | 302FZ31540 |
Деталь: | GEAR Z27S BYPASS |
Парткод: | 302FZ31550 |
Деталь: | PIN MPF DRIVE |
Парткод: | 302FZ31710 |
Деталь: | CLUTCH FEED 6 |
Парткод: | 302FZ31820 |
Деталь: | SEAL MPF CL |
Парткод: | 302FZ32060 |
Деталь: | CUT WASHER |
Парткод: | 5MVS665KB001 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | SPRING JOINT D |
Парткод: | 302BG22021 |
Деталь: | PARTS MOTOR DRUM |
Парткод: | 302FZ93440 |
Деталь: | JOINT DRUM |
Парткод: | 302FZ31270 |
Деталь: | STOPPER D MOTOR |
Парткод: | 302FZ31990 |
Деталь: | WIRE DLP MOTOR |
Парткод: | 302FZ46081 |
Деталь: | WIRE DRUM MOTOR SIG |
Парткод: | 302FZ46191 |
Деталь: | WIRE TRNS MOT JOINT |
Парткод: | 302HP46070 |
Деталь: | WIRE DRM MOT A |
Парткод: | 302FZ46831 |
Деталь: | CORE 8-16X10 |
Парткод: | 3HK27050 |
Деталь: | BEARING PRESS ROLLER |
Парткод: | 2FG20310 |
Деталь: | WIRE LIFT MOT |
Парткод: | 302FZ46250 |
Деталь: | PARTS DR-820 |
Парткод: | 302FZ93260 |
Деталь: | PARTS MPF DRIVE ASSY |
Парткод: | 302FZ93250 |
Деталь: | PARTS MC-820 |
Парткод: | 302FZ93480 |
Деталь: | PARTS DK-821(PR) |
Парткод: | 302HP93030 |
Деталь: | PULLEY,SEPARATION |
Парткод: | 2AR07230 |
Цена: | 360 ₽ |
Деталь: | BUSH 6 |
Парткод: | 2BG22960 |
Деталь: | BUSH 6 EW |
Парткод: | 2BG22970 |
Деталь: | TORQUE LIMITER 340 |
Парткод: | 2C907280 |
Деталь: | SENSOR 248NL1 |
Парткод: | 2C927210 |
Деталь: | JOINT DRIVE |
Парткод: | 302FB06151 |
Деталь: | PAD MP |
Парткод: | 302FB17760 |
Деталь: | SOLENOID LEADING FEED |
Парткод: | 302FB25180 |
Деталь: | BASE MPT |
Парткод: | 302FZ08011 |
Деталь: | LOWER GUIDE MPT |
Парткод: | 302FZ08020 |
Деталь: | SHAFT FEED MPT |
Парткод: | 302FZ08030 |
Деталь: | SHAFT FEED JOINT MPT |
Парткод: | 302FZ08040 |
Деталь: | SHAFT SEPARATE MPT |
Парткод: | 302FZ08050 |
Деталь: | HOLDER MPT LF |
Парткод: | 302FZ08070 |
Деталь: | PAPER STOPPER MPT F |
Парткод: | 302FZ08090 |
Деталь: | PAPER STOPPER MPT R |
Парткод: | 302FZ08100 |
Деталь: | LEVER STOPPER RELEASE |
Парткод: | 302FZ08110 |
Деталь: | SPRING SEPARATE PULLEY |
Парткод: | 302FZ08120 |
Деталь: | PULLEY LEADING FEED MPT |
Парткод: | 302FZ08130 |
Деталь: | HOLDER SEPARATE MPT |
Парткод: | 302FZ08160 |
Деталь: | GEAR MPT Z23 |
Парткод: | 302FZ08180 |
Деталь: | SPRING HOLDER MPT |
Парткод: | 302FZ08190 |
Деталь: | PARTS,ROLLER MID MPT SP |
Парткод: | 302FZ94490 |
Деталь: | SPRING MID MPT |
Парткод: | 302FZ08290 |
Деталь: | GEAR MPT Z41Z35 |
Парткод: | 302FZ08300 |
Деталь: | ACTUATOR MIDDLE MPT |
Парткод: | 302FZ08310 |
Деталь: | LEVER MPT SOLENOID |
Парткод: | 302FZ08320 |
Деталь: | SPRING ACTUATOR MPT |
Парткод: | 302FZ08350 |
Деталь: | COVER MPT DRIVE |
Парткод: | 302FZ08360 |
Деталь: | GEAR JOINT MPT UNIT |
Парткод: | 302FZ08370 |
Деталь: | SPRING SOLENOID MPT |
Парткод: | 302FZ08430 |
Деталь: | PLATE EARTH MPT ROLL |
Парткод: | 302FZ08440 |
Деталь: | GEAR MPT FEED Z19 ASSY |
Парткод: | 302FZ08450 |
Деталь: | PAD WIRE |
Парткод: | 302FZ08460 |
Деталь: | SHAFT MIDDLE L |
Парткод: | 302FZ22140 |
Деталь: | PULLEY MIDDLE |
Парткод: | 302FZ22150 |
Деталь: | CLUTCH MPF 6 |
Парткод: | 302FZ31830 |
Деталь: | WIRE MPF UNIT |
Парткод: | 302FZ46520 |
Деталь: | FRICTION PLATE,BYPASS |
Парткод: | 33906400 |
Деталь: | RING STOPPER 4 |
Парткод: | 5MVL177DN001 |
Деталь: | BUSH D1234 |
Парткод: | 5MVM176XN001 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | PARTS MPT ASSY |
Парткод: | 302FZ93220 |
Деталь: | PANEL UNIT, MFC9840CDW |
Парткод: | FK-821 |
Цена: | 64 600 ₽ |
Деталь: | RACK,CURSOR |
Парткод: | 2BC06750 |
Деталь: | LEFT WIRE B,LIFT |
Парткод: | 2BC07340 |
Деталь: | TERMINAL,PAPER SIZE DETECTION |
Парткод: | 2BC07860 |
Деталь: | STOPPER BYPASS TABLE |
Парткод: | 2FB07330 |
Деталь: | SIZE DETECTION ASSY |
Парткод: | 2FG01020 |
Деталь: | TABLE A,BYPASS(G E) |
Парткод: | 302BC43134 |
Деталь: | TABLE B,BYPASS(G E) |
Парткод: | 302BC43146 |
Деталь: | TABLE C,BYPASS(G E) |
Парткод: | 302BC43152 |
Деталь: | TABLE D,BYPASS(G E) |
Парткод: | 302BC43161 |
Деталь: | SPRING BYPASS TEBLE |
Парткод: | 302FB17700 |
Деталь: | GEAR 18 IDLE DEVELOPING |
Парткод: | 302FB17710 |
Деталь: | SPONGE BYPASS TABLE |
Парткод: | 302FB17720 |
Деталь: | SEAL BYPASS TABLE |
Парткод: | 302FB17730 |
Деталь: | SIZE INDICATOR BYPASS(M) |
Парткод: | 302FB17740 |
Деталь: | SIZE INDICATOR BYPASS(I) |
Парткод: | 302FB17750 |
Деталь: | PIN BYPASS TABLE |
Парткод: | 302FB17800 |
Деталь: | SWITCH BYPASS SIZE |
Парткод: | 302FB25140 |
Деталь: | CURSOR MPT F |
Парткод: | 302FZ08330 |
Деталь: | CURSOR MPT R |
Парткод: | 302FZ08340 |
Деталь: | LABEL MP CAUTION PIC V |
Парткод: | 302FZ08470 |
Деталь: | LABEL MP CAUTION J V |
Парткод: | 302FZ08480 |
Деталь: | LABEL MP CAUTION E V |
Парткод: | 302FZ08490 |
Деталь: | LABEL MP CAUTION TW V |
Парткод: | 302FZ08530 |
Деталь: | PAD MP L |
Парткод: | 302FZ08500 |
Деталь: | WIRE BYPASS TRAY |
Парткод: | 302FZ46840 |
Деталь: | LABEL ORIGINAL MAX |
Парткод: | 303H605010 |
Деталь: | COVER,CURSOR |
Парткод: | 33906900 |
Деталь: | PAD, LIFT |
Парткод: | 3C007060 |
Деталь: | ORIGINAL SIZE SWITCH |
Парткод: | 76727010 |
Деталь: | ACCESS.BAND |
Парткод: | 7YZM420001++H01 |
Деталь: | LABEL MP CAUTION 3 V |
Парткод: | 302FZ08510 |
Деталь: | LABEL MP CAUTION 6 V |
Парткод: | 302FZ08520 |
Деталь: | PARTS TRAY ASSY |
Парткод: | 302FZ93361 |
Деталь: | BUSH 6 |
Парткод: | 2BG22960 |
Деталь: | GEAR Z15 REGIST |
Парткод: | 2C916180 |
Деталь: | PIPE JOINT ICL |
Парткод: | 302FZ23600 |
Деталь: | SCREW WT ICL |
Парткод: | 302FZ23610 |
Деталь: | SEAL PIPE WT ICL |
Парткод: | 302FZ23640 |
Деталь: | PIPE WT ICL |
Парткод: | 302FZ23650 |
Деталь: | SEAL SHUTTER ICL |
Парткод: | 302FZ23710 |
Деталь: | SPRING SHUTTER WASTE/A-80 A4 |
Парткод: | 5MMW465LD003 |
Деталь: | SHUTTER WASTE /43587J2027 A4 |
Парткод: | 5MVX332DB020 |
Деталь: | GUIDE BELT UP |
Парткод: | 302FZ21241 |
Деталь: | HOLDER GUIDE PULLEY |
Парткод: | 302FZ21700 |
Деталь: | PULLEY GUIDE |
Парткод: | 302FZ25940 |
Деталь: | PARTS,FAN IMAGE SP |
Парткод: | 302FZ94660 |
Деталь: | WASTE BOTTLE ASSY |
Парткод: | 302FZ00700 |
Деталь: | PARTS,ICL WT ASSY SP |
Парткод: | 302FZ94320 |
Деталь: | PARTS TRANSFER BELT ASSY(PR) |
Парткод: | 302HP93090 |
Деталь: | FRAME FUSER F |
Парткод: | 302HP02010 |
Деталь: | SPRING EARTH EXIT |
Парткод: | 302FZ02510 |
Деталь: | FRAME FUSER R |
Парткод: | 302HP02020 |
Деталь: | PLATE EARTH EXIT |
Парткод: | 302HP02080 |
Деталь: | Plate Fuser |
Парткод: | 302FZ02720 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | FRAME FUSER UNIT CENTER |
Парткод: | 302FZ02250 |
Деталь: | WIRE FUSER PRI |
Парткод: | 302FZ46290 |
Деталь: | SCREW A |
Парткод: | 2BG02410 |
Деталь: | STAY REAR |
Парткод: | 302HP02050 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210002++H01 |
Деталь: | DUCT PU UPPER REAR |
Парткод: | 302FZ33120 |
Деталь: | DUCT PU LOWER |
Парткод: | 302FZ33210 |
Деталь: | DUCT PU UPPER |
Парткод: | 302FZ33220 |
Деталь: | PARTS,FAN COOLING DLP 70 SP |
Парткод: | 302FZ94380 |
Деталь: | WIRE LSU FAN |
Парткод: | 302FZ46670 |
Деталь: | STAY UPPER LEFT |
Парткод: | 302HP02060 |
Деталь: | PLATE FRAME FUSER F |
Парткод: | 302HP02040 |
Деталь: | JOINT TUBE B |
Парткод: | 302FZ33280 |
Деталь: | TUBE COOLING EXIT |
Парткод: | 302FZ33350 |
Деталь: | SPRING TUBE |
Парткод: | 302FZ33390 |
Деталь: | PLATE EARTH FUSER |
Парткод: | 302HP02090 |
Деталь: | PLATE EARTH FRAME F |
Парткод: | 302HP02100 |
Деталь: | CLAMP,EMT-3N(TAKEUCHI) |
Парткод: | M7005010 |
Деталь: | LEVER LOCK CASSETTE |
Парткод: | 302GR02221 |
Деталь: | SPRING LEVER |
Парткод: | 302GR02230 |
Деталь: | SHEET RAIL BYPASS |
Парткод: | 302FZ24170 |
Деталь: | SHIELD LSU WIRE |
Парткод: | 302FZ39490 |
Деталь: | SHIELD GASKET |
Парткод: | 7ZG65TAV+080H01 |
Деталь: | SHEET FRAME F |
Парткод: | 302HP02110 |
Деталь: | PAD FRAME F |
Парткод: | 302HP02120 |
Деталь: | TERMINAL,PAPER SIZE DETECTION |
Парткод: | 2BC07860 |
Деталь: | PLATE NUMBER |
Парткод: | 2BL04310 |
Деталь: | CUT WASHER 5 |
Парткод: | 2C904550 |
Деталь: | PIN CURSOR |
Парткод: | 2FB07050 |
Деталь: | SPRING CURSOR |
Парткод: | 2FB07060 |
Деталь: | SIZE DETECTION ASSY |
Парткод: | 2FG01020 |
Деталь: | SHAFT, WORK PLATE |
Парткод: | 302AR07041 |
Деталь: | WORK PLATE,LIFT CASSETTE |
Парткод: | 302BC06091 |
Деталь: | PLATE SIZE IN |
Парткод: | 302FB05210 |
Деталь: | PLATE SIZE C |
Парткод: | 302FB05200 |
Деталь: | LEVER CURSOR A |
Парткод: | 302FB07032 |
Деталь: | LEVER CURSOR B |
Парткод: | 302FB07042 |
Деталь: | ADJUSTING PLATE CASSETTE |
Парткод: | 302FB07340 |
Деталь: | PIN CASSETTE |
Парткод: | 302FB07420 |
Деталь: | BASE CASSETTE |
Парткод: | 302FG07091 |
Деталь: | GROUND PLATE,CASSETTE |
Парткод: | 302FG07200 |
Деталь: | COVER CASSETTE |
Парткод: | 302FZ04090 |
Деталь: | CASSETTE |
Парткод: | 302FZ09011 |
Деталь: | CURSOR RIGHT |
Парткод: | 302FZ09030 |
Деталь: | CURSOR RIGHT UPPER |
Парткод: | 302FZ09040 |
Деталь: | SHAFT HANDLE |
Парткод: | 302FZ09070 |
Деталь: | LABEL CASSETTE OPERATION 1 |
Парткод: | 302FZ09090 |
Деталь: | LABEL BYPASS OPERATION |
Парткод: | 302FZ09101 |
Деталь: | LABEL CURSOR OPERATION |
Парткод: | 302FZ09111 |
Деталь: | SPONGE FRONT |
Парткод: | 302FZ09120 |
Деталь: | LABEL PAPER MAX |
Парткод: | 302FZ09130 |
Деталь: | LABEL PAPER SIZE R1 |
Парткод: | 302FZ09141 |
Деталь: | LABEL PAPER UPPER LIMIT |
Парткод: | 302FZ09150 |
Деталь: | HANDLE CASSETTE 1 |
Парткод: | 302GR09020 |
Деталь: | HANDLE CASSETTE 2 |
Парткод: | 302GR09040 |
Деталь: | LEVER CASSETTE |
Парткод: | 302GR09051 |
Деталь: | RAIL CURSOR R |
Парткод: | 302GR09060 |
Деталь: | LID PAPER SIZE |
Парткод: | 302GR09070 |
Деталь: | RAIL CURSOR A |
Парткод: | 302GR09080 |
Деталь: | Support Plate |
Парткод: | 302GR09090 |
Деталь: | FRONT CURSOR CASSETTE |
Парткод: | 302GR09102 |
Деталь: | REAR CURSOR CASSETTE |
Парткод: | 302GR09112 |
Деталь: | SPRING LEVER CASSETTE |
Парткод: | 302GR09120 |
Деталь: | SHAFT PULLEY |
Парткод: | 302GR09130 |
Деталь: | WORK PLATE HANDLE |
Парткод: | 302GR09150 |
Деталь: | STOPPER PAPER |
Парткод: | 302GR09160 |
Деталь: | SEAL DETECTION PLATE |
Парткод: | 302GR09210 |
Деталь: | LIFT LOCK |
Парткод: | 302GR09990 |
Деталь: | LABEL PAPER SIZE |
Парткод: | 302GR34022 |
Деталь: | WIRE CASSETTE UNIT |
Парткод: | 302GR46450 |
Деталь: | DETECTION PLATE,PAPER SIZE |
Парткод: | 33907170 |
Деталь: | CUSHION,CASSETTE WORK PLATE |
Парткод: | 33907210 |
Деталь: | PULLEY,CASSETTE |
Парткод: | 34907150 |
Деталь: | RETAINER M4 |
Парткод: | 3CY06030 |
Деталь: | RACK CURSOR |
Парткод: | 3CY06090 |
Деталь: | GEAR 20,CURSOR |
Парткод: | 3CY06100 |
Деталь: | CUSHION,CASSETTE R |
Парткод: | 60907170 |
Деталь: | SPRING, PAD |
Парткод: | 66106080 |
Деталь: | PAD,CASSETTE |
Парткод: | 66107100 |
Деталь: | CONNECTOR |
Парткод: | 7YCC08B2046+H01 |
Деталь: | PARTS CASSETTE 1ST ASSY |
Парткод: | 302FZ93034 |
Деталь: | BUSH 6 |
Парткод: | 2BG22960 |
Деталь: | BUSH 6 EW |
Парткод: | 2BG22970 |
Деталь: | CUT WASHER 4 |
Парткод: | 2BG22990 |
Деталь: | PARTS, ROLLER BYPASS A SP |
Парткод: | 302FZ94470 |
Деталь: | PULLEY MPT BYPASS |
Парткод: | 302FZ07020 |
Деталь: | PARTS, ROLLER BYPASS B SP |
Парткод: | 302FZ94480 |
Деталь: | BASE MPT BYPASS |
Парткод: | 302FZ07040 |
Деталь: | COVER MPT BYPASS |
Парткод: | 302FZ07051 |
Деталь: | GUIDE BYPASS RIGHT |
Парткод: | 302FZ07060 |
Деталь: | COVER BYPASS OUT |
Парткод: | 302FZ07070 |
Деталь: | PULLEY BYPASS |
Парткод: | 302FZ07080 |
Деталь: | BELT BYPASS |
Парткод: | 302FZ07090 |
Деталь: | GEAR BYPASS A |
Парткод: | 302FZ07100 |
Деталь: | SPRING BYPASS PULLEY |
Парткод: | 302FZ07110 |
Деталь: | GEAR BYPASS JOINT |
Парткод: | 302FZ07120 |
Деталь: | SPRING BYPASS MOTION |
Парткод: | 302FZ07130 |
Деталь: | COVER MPT REAR |
Парткод: | 302FZ07140 |
Деталь: | PULLEY TENSION BELT |
Парткод: | 302FZ07150 |
Деталь: | PLATE EARTH MPT |
Парткод: | 302FZ07180 |
Деталь: | SPRING EARTH BYPASS |
Парткод: | 302FZ07190 |
Деталь: | SPRING EARTH BYPASS JOINT |
Парткод: | 302FZ07210 |
Деталь: | GUIDE BYPASS IN |
Парткод: | 302FZ07231 |
Деталь: | SLIDER BYPASS A |
Парткод: | 302FZ07240 |
Деталь: | SLIDER BYPASS B |
Парткод: | 302FZ07250 |
Деталь: | PLATE GUIDE MPT |
Парткод: | 302FZ07300 |
Деталь: | BUSH CONTACT MPT B |
Парткод: | 302FZ07310 |
Деталь: | SPRING EARTH MPT A |
Парткод: | 302FZ07320 |
Деталь: | SPRING EARTH MPT B |
Парткод: | 302FZ07330 |
Деталь: | LABEL JAM BYPASS B2 |
Парткод: | 302FZ07350 |
Деталь: | LABEL JAM BYPASS B3 |
Парткод: | 302FZ07360 |
Деталь: | SPRING BYPASS PULLEY B |
Парткод: | 302FZ07380 |
Деталь: | ROLLER BYPASS C |
Парткод: | 302FZ07390 |
Деталь: | LEVER JAM BYPASS |
Парткод: | 302FZ07400 |
Деталь: | MOUNT LEVER BYPASS |
Парткод: | 302FZ07410 |
Деталь: | LABEL JAM BYPASS B4 |
Парткод: | 302FZ07420 |
Деталь: | STOPPER EARTH MIDDLE |
Парткод: | 302FZ22760 |
Деталь: | COLLAR DU PULLEY |
Парткод: | 302FZ29140 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | PARTS MPT BYPASS ASSY |
Парткод: | 302FZ93210 |
Деталь: | STUD SCREW SC |
Парткод: | 2BG12430 |
Деталь: | CUT WASHER 4 |
Парткод: | 302FB09830 |
Деталь: | ROLLER OP UPPER |
Парткод: | 302HP28010 |
Деталь: | ROLLER OP LOW |
Парткод: | 302HP28020 |
Деталь: | FRAME EXIT OP |
Парткод: | 302HP28090 |
Деталь: | GUIDE EXIT OP |
Парткод: | 302HP28160 |
Деталь: | PLATE EARTH OP ROLL |
Парткод: | 302HP28210 |
Деталь: | GEAR Z25 EXIT |
Парткод: | 302HP31010 |
Деталь: | GEAR Z23 EXIT |
Парткод: | 302HP31020 |
Деталь: | BUSHING 6 |
Парткод: | 3CY07080 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | BEARING,DRIVE |
Парткод: | 68822330 |
Деталь: | COVER LEFT MID B |
Парткод: | 302HP04150 |
Деталь: | COVER AT |
Парткод: | 303KN02030 |
Деталь: | RETAINER FINISHER FL |
Парткод: | 303KN02040 |
Деталь: | RETAINER FINISHER RL |
Парткод: | 303KN02050 |
Деталь: | GUIDE INSERT |
Парткод: | 303KN04040 |
Деталь: | GUIDE TOP COVER |
Парткод: | 302HP04180 |
Деталь: | AK-715/ATTACHMENT KIT (OPTION) |
Парткод: | 1702HP0UN0 |
Деталь: | Ось узла подачи бумаги |
Парткод: | 302AR07252 |
Цена: | 420 ₽ |
Деталь: | SWITCH REGISTRATION |
Парткод: | 302FZ44090 |
Деталь: | PRINTED W.BOARD FAN |
Парткод: | 302FZ01300 |
Деталь: | VARISTOR TC ASSY |
Парткод: | 302FZ01310 |
Деталь: | BASE CONVEYING |
Парткод: | 302FZ22012 |
Деталь: | PARTS,ROLLER TRANSFER SP |
Парткод: | 302FZ94510 |
Деталь: | PARTS,ROLLER REGIST L SP |
Парткод: | 302FZ94520 |
Деталь: | GUIDE CONVEYING |
Парткод: | 302FZ22071 |
Деталь: | GUIDE TC L |
Парткод: | 302FZ22090 |
Деталь: | GEAR TC Z24H |
Парткод: | 302FZ22110 |
Деталь: | GEAR REGIST Z22H |
Парткод: | 302FZ22130 |
Деталь: | SHAFT MIDDLE L |
Парткод: | 302FZ22140 |
Деталь: | PULLEY MIDDLE |
Парткод: | 302FZ22150 |
Деталь: | HOOK CONVEYING F |
Парткод: | 302FZ22170 |
Деталь: | HOOK CONVEYING R |
Парткод: | 302FZ22180 |
Деталь: | PLATE DISCHARGER |
Парткод: | 302FZ22201 |
Деталь: | HOLDER DISCHARGER |
Парткод: | 302FZ22211 |
Деталь: | CONTACT TRANSFER |
Парткод: | 302FZ22220 |
Деталь: | CONTACT DISCHARGE |
Парткод: | 302FZ22230 |
Деталь: | PLATE EARTH REGIST |
Парткод: | 302FZ22241 |
Деталь: | SPRING EARTH CONVEYING |
Парткод: | 302FZ22250 |
Деталь: | SPRING REGIST F |
Парткод: | 302FZ22300 |
Деталь: | SPRING REGIST R |
Парткод: | 302FZ22310 |
Деталь: | SPRING TRANSFER F |
Парткод: | 302FZ22320 |
Деталь: | SPRING TRANSFER R |
Парткод: | 302FZ22330 |
Деталь: | SPRING MIDDLE |
Парткод: | 302FZ22340 |
Деталь: | SPRING GUIDE TRANSFER |
Парткод: | 302FZ22350 |
Деталь: | SPRING CONVEYING F |
Парткод: | 302FZ22360 |
Деталь: | SPRING CONVEYING R |
Парткод: | 302FZ22370 |
Деталь: | GUIDE MIDDLE L |
Парткод: | 302FZ22400 |
Деталь: | HOLDER SENS FEED |
Парткод: | 302FZ22411 |
Деталь: | SPRING EARTH CONVEYING UNIT |
Парткод: | 302FZ22540 |
Деталь: | COVER PWB FEED |
Парткод: | 302FZ22550 |
Деталь: | BUSH REGIST |
Парткод: | 302FZ22560 |
Деталь: | SPRING CONTACT DISCHARGER |
Парткод: | 302FZ22570 |
Деталь: | SPRING LEFT CONV |
Парткод: | 302FZ22580 |
Деталь: | SHAFT HOOK CONVEYING |
Парткод: | 302FZ22660 |
Деталь: | SHEET MIDDLE L |
Парткод: | 302FZ22720 |
Деталь: | LEVER CONVEYING |
Парткод: | 302FZ22880 |
Деталь: | COVER LEVER CONVEY |
Парткод: | 302FZ22890 |
Деталь: | SHAFT LEVER CONVEY |
Парткод: | 302FZ22900 |
Деталь: | STOPPER BUSH TRANSFER |
Парткод: | 302FZ22911 |
Деталь: | BUSH TRANSFER B F |
Парткод: | 302FZ22920 |
Деталь: | LABEL JAM FEED A1 |
Парткод: | 302FZ22960 |
Деталь: | SHEET SENS CONVEY |
Парткод: | 302FZ22991 |
Деталь: | SHEET REGIST L |
Парткод: | 302FZ24010 |
Деталь: | GUIDE TC UP |
Парткод: | 302FZ24100 |
Деталь: | SPACER TC GUIDE |
Парткод: | 302FZ24140 |
Деталь: | SHEET DISCHARGER |
Парткод: | 302FZ24240 |
Деталь: | PLATE CONV FAN |
Парткод: | 302FZ24500 |
Деталь: | DUCT CONV UP |
Парткод: | 302FZ24510 |
Деталь: | SEAL FAN CONV |
Парткод: | 302FZ24530 |
Деталь: | SPRING EARTH FAN |
Парткод: | 302FZ24540 |
Деталь: | SEAL FAN CONV B |
Парткод: | 302FZ24550 |
Деталь: | SHEET FAN PWD |
Парткод: | 302FZ24560 |
Деталь: | FAN CONVEYING 40 |
Парткод: | 302FZ44070 |
Деталь: | WIRE TC GUIDE |
Парткод: | 302FZ46861 |
Деталь: | WIRE FEED J |
Парткод: | 302FZ46880 |
Деталь: | WIRE FEED PI |
Парткод: | 302FZ46890 |
Деталь: | COLLAR TRANS ROLLER |
Парткод: | 302GR22110 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210006++H01 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | STOPPER BAND CONVEY |
Парткод: | 302FZ22770 |
Деталь: | BAND CONVEYING |
Парткод: | 302FZ24060 |
Деталь: | PARTS FEED UNIT ASSY |
Парткод: | 302FZ93510 |
Деталь: | SWITCH,COVER OPEN |
Парткод: | 66127010 |
Деталь: | MOUNT CASSETTE SW |
Парткод: | 302FZ02610 |
Деталь: | WIRE FEED JOINT |
Парткод: | 302HP46050 |
Деталь: | CONNECTOR |
Парткод: | 7YCC08B2046+H02 |
Деталь: | RETAINING PIN DRAWER |
Парткод: | 302FZ03070 |
Деталь: | MOUNT HV TERMINAL |
Парткод: | 302FZ39110 |
Деталь: | SPRING HV MAIN |
Парткод: | 302FZ39520 |
Деталь: | HVU MAIN |
Парткод: | 302FZ45032 |
Деталь: | GUIDE WIRE MAIN |
Парткод: | 302FZ39210 |
Деталь: | SHEET PWB |
Парткод: | 302FZ39900 |
Деталь: | MOUNT HV LOWER |
Парткод: | 302FZ39920 |
Деталь: | HEATER DEHUMIDIFIER 120 |
Парткод: | 302FZ45170 |
Деталь: | HEATER DEHUMIDIFIER 240 |
Парткод: | 302FZ45160 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | GUIDE WIRE SUB |
Парткод: | 302FZ39220 |
Деталь: | SPRING ICL |
Парткод: | 302FZ39530 |
Деталь: | TERMINAL ICL |
Парткод: | 302FZ39580 |
Деталь: | WIRE CLEANING |
Парткод: | 302FZ46270 |
Деталь: | WIRE MPF |
Парткод: | 302FZ46031 |
Деталь: | LABEL L,HIGH TEMPERATURE CAUTION(EXP) |
Парткод: | 20305130 |
Деталь: | COVER CONN |
Парткод: | 302GR39190 |
Деталь: | SPRING HV2 TC |
Парткод: | 302FZ39620 |
Деталь: | SPRING HV2 SE |
Парткод: | 302FZ39630 |
Деталь: | PARTS,PWB HVU TRANSFER 2 ASSY,SP |
Парткод: | 302FZ94690 |
Деталь: | WIRE HVU 3 |
Парткод: | 302FZ46130 |
Деталь: | HOLDER HV2 TC |
Парткод: | 302FZ39610 |
Деталь: | GEAR Z38R DSK |
Парткод: | 302FZ31520 |
Деталь: | PULLEY 26 FEED |
Парткод: | 302FZ31730 |
Деталь: | BELT FEED DRIVE |
Парткод: | 302FZ31260 |
Деталь: | WIRE JOINT |
Парткод: | 302FZ46020 |
Деталь: | BUSH 6 |
Парткод: | 2BG22960 |
Деталь: | BUSH 8 |
Парткод: | 2BG22980 |
Деталь: | PARTS,PWB FEED ASSY,SP |
Парткод: | 302FZ94681 |
Деталь: | MOTOR FEED |
Парткод: | 302FZ31020 |
Деталь: | PLATE FEED DRIVE |
Парткод: | 302FZ31120 |
Деталь: | HOLDER FEED DRIVE |
Парткод: | 302FZ31130 |
Деталь: | HOLDER CLUTCH |
Парткод: | 302FZ31170 |
Деталь: | SHAFT FEED DRIVE |
Парткод: | 302FZ31200 |
Деталь: | SHAFT FEED 2 DRIVE |
Парткод: | 302FZ31210 |
Деталь: | SHAFT LSU DRIVE |
Парткод: | 302FZ31240 |
Деталь: | GEAR Z81L-Z22R |
Парткод: | 302FZ31420 |
Деталь: | GEAR Z42L |
Парткод: | 302FZ31430 |
Деталь: | GEAR Z14R LSU |
Парткод: | 302FZ31440 |
Деталь: | GEAR Z36L-Z22R REG |
Парткод: | 302FZ31450 |
Деталь: | GEAR Z52L LSU |
Парткод: | 302FZ31460 |
Деталь: | GEAR Z33R-Z23R CL |
Парткод: | 302FZ31470 |
Деталь: | GEAR Z33R-Z23R FEED |
Парткод: | 302FZ31480 |
Деталь: | GEAR Z28L |
Парткод: | 302FZ31490 |
Деталь: | GEAR Z32L-Z26R FEED CL |
Парткод: | 302FZ31500 |
Деталь: | GEAR Z26R-Z23L FEED CL |
Парткод: | 302FZ31510 |
Деталь: | GEAR Z32L |
Парткод: | 302FZ31530 |
Деталь: | GEAR Z35L CL |
Парткод: | 302FZ31590 |
Деталь: | GEAR Z28R |
Парткод: | 302FZ31600 |
Деталь: | PIN DRIVE FEED |
Парткод: | 302FZ31740 |
Деталь: | GEAR Z25R JOINT |
Парткод: | 302FZ31800 |
Деталь: | CLUTCH REGIST 8 |
Парткод: | 302FZ31810 |
Деталь: | CLUTCH FEED 6 |
Парткод: | 302FZ31820 |
Деталь: | STUD SCREW 435 |
Парткод: | 302FZ31840 |
Деталь: | COUPLING PAPER FEED |
Парткод: | 302FZ32070 |
Деталь: | PLATE EARTH FEED |
Парткод: | 302FZ39720 |
Деталь: | WIRE PRE FEED |
Парткод: | 302FZ46100 |
Деталь: | CUT WASHER |
Парткод: | 5MVS665KB001 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | CONNECTOR |
Парткод: | 7YCC08B2046+H02 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210006++H01 |
Деталь: | ACCESS.BAND |
Парткод: | 7YZM410001++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610003++H01 |
Деталь: | WIRE TRANSFER |
Парткод: | 302FZ46050 |
Деталь: | COLLAR EJECT |
Парткод: | 3HL10170 |
Деталь: | COLLAR DU PULLEY |
Парткод: | 302FZ29140 |
Деталь: | WIRE EXIT MOT |
Парткод: | 302FZ46411 |
Деталь: | BUSHING 8 |
Парткод: | 2BC06510 |
Деталь: | STOPPER 5 |
Парткод: | 2BC06980 |
Деталь: | PARTS,MOTOR FUSER SP |
Парткод: | 302FZ94290 |
Деталь: | GEAR Z20L FUSER DRIVE |
Парткод: | 302FZ31570 |
Деталь: | GEAR Z46 FUSER |
Парткод: | 302FZ31580 |
Деталь: | JOINT GEAR EXIT |
Парткод: | 302FZ31671 |
Деталь: | PULLEY EXIT DRIVE |
Парткод: | 302FZ31680 |
Деталь: | GEAR EXIT Z20 |
Парткод: | 302FZ31690 |
Деталь: | GEAR EXIT Z63 Z21 |
Парткод: | 302FZ31700 |
Деталь: | PIN EXIT |
Парткод: | 302FZ31750 |
Деталь: | GEAR EXIT Z39Z26 |
Парткод: | 302FZ31760 |
Деталь: | GEAR EXIT Z30 JOINT |
Парткод: | 302FZ31770 |
Деталь: | GEAR EXIT Z48 |
Парткод: | 302FZ31780 |
Деталь: | SPRING EXIT 60 |
Парткод: | 302FZ31790 |
Деталь: | MOUNT FUSER DRIVE |
Парткод: | 302FZ31861 |
Деталь: | GEAR Z20 FUSER |
Парткод: | 302FZ31870 |
Деталь: | GEAR EXIT Z45Z22 |
Парткод: | 302FZ31910 |
Деталь: | GEAR Z30 FUSER |
Парткод: | 302FZ31920 |
Деталь: | GEAR Z65-Z29 FUSER |
Парткод: | 302FZ31930 |
Деталь: | PLATE FUSER DRIVE |
Парткод: | 302FZ32010 |
Деталь: | HOLDER FUSER CL |
Парткод: | 302FZ32021 |
Деталь: | SHAFT FUSER DRIVE |
Парткод: | 302FZ32030 |
Деталь: | CLUTCH FUSER 8 |
Парткод: | 302FZ32040 |
Деталь: | SW.MICRO |
Парткод: | 7SM010303+++H01 |
Деталь: | PARTS FEED DRIVE ASSY |
Парткод: | 302FZ93281 |
Деталь: | PARTS FUSER DRIVE ASSY |
Парткод: | 302FZ93270 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | SPONGE WIRE A |
Парткод: | 2BG06500 |
Деталь: | BUSH 8 EW |
Парткод: | 2BG22950 |
Деталь: | BUSH 6 |
Парткод: | 2BG22960 |
Деталь: | ROLLER FEED LOW |
Парткод: | 302FZ22750 |
Деталь: | GUIDE FEED LOW 1ST |
Парткод: | 302FZ22800 |
Деталь: | SWITCH CONVEYING |
Парткод: | 302FZ44080 |
Деталь: | WIRE FEED SW UP |
Парткод: | 302FZ46540 |
Деталь: | SWITCH,SIZE |
Парткод: | 35927420 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | PLATE SENS MIDDLE |
Парткод: | 302FZ22940 |
Деталь: | GUIDE FEED LOW 2ND |
Парткод: | 302FZ22810 |
Деталь: | GUIDE FEED UP 2ND |
Парткод: | 302FZ22830 |
Деталь: | WIRE FEED SW LOW |
Парткод: | 302FZ46550 |
Деталь: | SWITCH REGISTRATION |
Парткод: | 302FZ44090 |
Деталь: | SENSOR 248NL1 |
Парткод: | 2C927210 |
Деталь: | GUIDE MIDDLE LOW |
Парткод: | 302FZ22591 |
Деталь: | SPRING EARTH MIDDLE |
Парткод: | 302FZ22630 |
Деталь: | STOPPER EARTH MIDDLE |
Парткод: | 302FZ22760 |
Деталь: | SHEET GUIDE LOW A |
Парткод: | 302FZ22781 |
Деталь: | SHEET GUIDE LOW B |
Парткод: | 302FZ22790 |
Деталь: | ACTUATOR MID BYPASS |
Парткод: | 302FZ22840 |
Деталь: | SPRING ACTUATOR BYPASS |
Парткод: | 302FZ22870 |
Деталь: | SHEET SENS MIDDLE |
Парткод: | 302FZ22950 |
Деталь: | WIRE FEED JAM |
Парткод: | 302FZ46330 |
Деталь: | CAM SHAFT BLADE |
Парткод: | 302FZ02671 |
Деталь: | SHAFT CLN LSU |
Парткод: | 302FZ02682 |
Деталь: | CUT WASHER 4 |
Парткод: | 2BG22990 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | CLUTCH LSU CLEANING |
Парткод: | 302FZ02741 |
Деталь: | ROLLER REGIST R |
Парткод: | 302FZ22040 |
Деталь: | GEAR REGIST Z18H |
Парткод: | 302FZ22120 |
Деталь: | BEARING 688AZZ |
Парткод: | 302FZ21300 |
Деталь: | LABEL JAM BYPASS B1 |
Парткод: | 302FZ07340 |
Деталь: | GUIDE FEED R |
Парткод: | 302FZ22084 |
Деталь: | SHAFT MIDDLE L |
Парткод: | 302FZ22140 |
Деталь: | PULLEY MIDDLE |
Парткод: | 302FZ22150 |
Деталь: | ACTUATOR REGIST |
Парткод: | 302FZ22160 |
Деталь: | SPRING MIDDLE |
Парткод: | 302FZ22340 |
Деталь: | SHEET REGIST |
Парткод: | 302FZ22380 |
Деталь: | SPRING ACTUATOR REGIST |
Парткод: | 302FZ22620 |
Деталь: | PLATE GUIDE MIDDLE R |
Парткод: | 302FZ24110 |
Деталь: | PAD REGIST |
Парткод: | 302FZ24160 |
Деталь: | PLATE GUIDE MIDDLE F |
Парткод: | 302FZ24220 |
Деталь: | WIRE REG JAM |
Парткод: | 302FZ46350 |
Деталь: | MOUNT SOLENOID |
Парткод: | 302FZ02690 |
Деталь: | SOLENOID LSU CLN |
Парткод: | 302FZ44050 |
Деталь: | BUSH 6 EW |
Парткод: | 2BG22970 |
Деталь: | PARTS,ROLLER MIDDLE R SP |
Парткод: | 302FZ94540 |
Деталь: | GUIDE MIDDLE R |
Парткод: | 302FZ22060 |
Деталь: | SHEET MIDDLE BYPASS |
Парткод: | 302FZ22460 |
Деталь: | GEAR MIDDLE A |
Парткод: | 302FZ22470 |
Деталь: | GEAR MIDDLE B |
Парткод: | 302FZ22481 |
Деталь: | GEAR MIDDLE Z19S |
Парткод: | 302FZ22490 |
Деталь: | LEVER MIDDLE F |
Парткод: | 302FZ22500 |
Деталь: | LEVER MIDDLE R |
Парткод: | 302FZ22520 |
Деталь: | SPRING MID LEVER F |
Парткод: | 302FZ22600 |
Деталь: | SPRING MID LEVER R |
Парткод: | 302FZ22610 |
Деталь: | PARTS,ROLLER MIDDLE BYPASS SP |
Парткод: | 302FZ94550 |
Деталь: | GUIDE MIDDLE BYPASS |
Парткод: | 302FZ22860 |
Деталь: | STOPPER MID |
Парткод: | 302FZ22980 |
Деталь: | BUSH TC EW |
Парткод: | 302FZ24090 |
Деталь: | PLATE EARTH MID SENS |
Парткод: | 302FZ22690 |
Деталь: | MOUNT SHAFT CAM |
Парткод: | 302FZ02700 |
Деталь: | GUIDE FEED UP 1ST |
Парткод: | 302FZ22820 |
Деталь: | STOPPER CORD |
Парткод: | 302FZ22700 |
Деталь: | PARTS,GUIDE FEED LOW 1ST ASSY SP |
Парткод: | 302FZ94200 |
Деталь: | PARTS,GUIDE FEED LOW 2ND ASSY SP |
Парткод: | 302FZ94210 |
Деталь: | PARTS,GUIDE MIDDLE LOW ASSY SP |
Парткод: | 302FZ94220 |
Деталь: | PARTS GUIDE FEED R ASSY |
Парткод: | 302FZ93430 |
Деталь: | PARTS,GUIDE MIDDLE R ASSY SP |
Парткод: | 302FZ94240 |
Деталь: | GEAR MAG Z14H |
Парткод: | 302FZ14161 |
Деталь: | GEAR IDLE Z15H DLP |
Парткод: | 302FZ14170 |
Деталь: | GEAR SLEEVE Z17H |
Парткод: | 302FZ14180 |
Деталь: | GEAR Z14S |
Парткод: | 302FZ14230 |
Деталь: | COVER FRONT DLP |
Парткод: | 302FZ14300 |
Деталь: | COVER REAR BK DLP |
Парткод: | 302FZ14310 |
Деталь: | COVER REAR Y DLP |
Парткод: | 302FZ14420 |
Деталь: | COVER REAR C DLP |
Парткод: | 302FZ14430 |
Деталь: | COVER REAR M DLP |
Парткод: | 302FZ14440 |
Деталь: | STUD SCREW M4 |
Парткод: | 302FZ14840 |
Деталь: | PARTS DV-821 K(PR) |
Парткод: | 302HP93040 |
Деталь: | PARTS DV-821 Y(PR) |
Парткод: | 302HP93050 |
Деталь: | PARTS DV-821 C(PR) |
Парткод: | 302HP93060 |
Деталь: | PARTS DV-821 M(PR) |
Парткод: | 302HP93070 |
Деталь: | BUSH 6 EW |
Парткод: | 2BG22970 |
Деталь: | SENSOR 248NL1 |
Парткод: | 2C927210 |
Деталь: | SHAFT MIDDLE L |
Парткод: | 302FZ22140 |
Деталь: | PULLEY MIDDLE |
Парткод: | 302FZ22150 |
Деталь: | FRAME DU |
Парткод: | 302FZ29012 |
Деталь: | PARTS, ROLLER DUPLEX A SP |
Парткод: | 302FZ94620 |
Деталь: | PARTS, ROLLER DUPLEX B SP |
Парткод: | 302FZ94630 |
Деталь: | GEAR DU Z32S |
Парткод: | 302FZ29040 |
Деталь: | GEAR DU IDLE |
Парткод: | 302FZ29050 |
Деталь: | PLATE EARTH DU |
Парткод: | 302FZ29061 |
Деталь: | ACTUATOR DU |
Парткод: | 302FZ29070 |
Деталь: | RETAINER ACTUATOR DU |
Парткод: | 302FZ29080 |
Деталь: | SPRING ACT DU |
Парткод: | 302FZ29090 |
Деталь: | BELT DU |
Парткод: | 302FZ29110 |
Деталь: | PULLEY DU BELT |
Парткод: | 302FZ29120 |
Деталь: | SPRING DU |
Парткод: | 302FZ29130 |
Деталь: | COLLAR DU PULLEY |
Парткод: | 302FZ29140 |
Деталь: | MOTOR DU |
Парткод: | 302FZ31071 |
Деталь: | WIRE DU PI |
Парткод: | 302FZ46680 |
Деталь: | LABEL JAM CONVEYING |
Парткод: | 302HP34040 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | SHAFT LEFT COVER B |
Парткод: | 302FZ04420 |
Деталь: | COVER LEFT |
Парткод: | 302FZ04302 |
Деталь: | LEVER LEFT COVER |
Парткод: | 302FZ04321 |
Деталь: | SHAFT HOOK |
Парткод: | 302FZ04330 |
Деталь: | PLATE LEFT COVER F |
Парткод: | 302FZ04360 |
Деталь: | PLATE LEFT COVER R |
Парткод: | 302FZ04370 |
Деталь: | SPRING LEFT COVER F |
Парткод: | 302FZ04390 |
Деталь: | SPRING LEFT COVER R |
Парткод: | 302FZ04400 |
Деталь: | HOOK LEFT COVER F |
Парткод: | 302FZ04800 |
Деталь: | HOOK LEFT COVER R |
Парткод: | 302FZ04810 |
Деталь: | PLATE LEFT COVER D |
Парткод: | 302FZ04980 |
Деталь: | GUIDE DU R |
Парткод: | 302HP28180 |
Деталь: | PLATE LEFT COVER E |
Парткод: | 302HP28300 |
Деталь: | SHEET LEFT PLATE |
Парткод: | 302HP28440 |
Деталь: | SHIELD GASKET |
Парткод: | 7ZG65TSV+020H01 |
Деталь: | SHIELD GASKET |
Парткод: | 7ZGSTG77+014H01 |
Деталь: | BAND B |
Парткод: | 2BG06480 |
Деталь: | SHAFT FEED B |
Парткод: | 302BG06152 |
Деталь: | PULLEY FEED |
Парткод: | 302BG06162 |
Деталь: | COVER FEED LOW |
Парткод: | 302FZ04350 |
Деталь: | SPRING FEED LOW |
Парткод: | 302FZ04760 |
Деталь: | LABEL LEFT COVER A |
Парткод: | 302GR34040 |
Деталь: | LABEL VFEED CAUTION |
Парткод: | 302FB05380 |
Деталь: | SHAFT LEFT COVER |
Парткод: | 302FZ04310 |
Деталь: | BAND LEFT COVER |
Парткод: | 302FZ04990 |
Деталь: | LABEL VFEED CAUTION 6NATIONS |
Парткод: | 302FB05440 |
Деталь: | PARTS DU ASSY |
Парткод: | 302FZ93500 |
Деталь: | PARTS LEFT COVER ASSY SP(PR) |
Парткод: | 302HP93110 |
Деталь: | PARTS COVER FEED LOW ASSY |
Парткод: | 302FZ93311 |
Деталь: | SPRING FUSER EXIT |
Парткод: | 2BG20890 |
Деталь: | SENSOR 248NL1 |
Парткод: | 2C927210 |
Деталь: | LEVER LEFT COVER |
Парткод: | 302FZ04321 |
Деталь: | SPRING LEFT COVER F |
Парткод: | 302FZ04390 |
Деталь: | SPRING LEFT COVER R |
Парткод: | 302FZ04400 |
Деталь: | SHAFT MIDDLE L |
Парткод: | 302FZ22140 |
Деталь: | PULLEY MIDDLE |
Парткод: | 302FZ22150 |
Деталь: | PULLEY FUSER EXIT |
Парткод: | 302FZ25360 |
Деталь: | SHAFT EXIT PULLEY |
Парткод: | 302FZ25380 |
Деталь: | GEAR Z20S-Z23S |
Парткод: | 302FZ28060 |
Деталь: | GEAR Z23S EXIT |
Парткод: | 302FZ28080 |
Деталь: | GEAR Z29S |
Парткод: | 302FZ28090 |
Деталь: | SPRING EXIT PULLEY A |
Парткод: | 302FZ28110 |
Деталь: | SPRING EARTH |
Парткод: | 302FZ28120 |
Деталь: | EXIT PUSH |
Парткод: | 302FZ28260 |
Деталь: | SPRING EXIT PUSH |
Парткод: | 302FZ28270 |
Деталь: | LID COVER LEFT |
Парткод: | 302HP04090 |
Деталь: | SHAFT HOOK |
Парткод: | 302HP04100 |
Деталь: | HOOK LID F |
Парткод: | 302HP04110 |
Деталь: | HOOK LID R |
Парткод: | 302HP04120 |
Деталь: | ROLLER EXIT PR |
Парткод: | 302HP28030 |
Деталь: | ROLLER EXIT IN |
Парткод: | 302HP28040 |
Деталь: | ROLLER EXIT OUT |
Парткод: | 302HP28050 |
Деталь: | FRAME EXIT UPPER |
Парткод: | 302HP28060 |
Деталь: | FRAME EXIT LOW |
Парткод: | 302HP28070 |
Деталь: | FRAME EXIT ENTRANCE |
Парткод: | 302HP28080 |
Деталь: | ACTUATOR EXIT L |
Парткод: | 302HP28100 |
Деталь: | ACTUATOR EXIT R |
Парткод: | 302HP28110 |
Деталь: | ACTUATOR EXIT ENTRANCE |
Парткод: | 302HP28120 |
Деталь: | GUIDE CHANGE R |
Парткод: | 302HP28130 |
Деталь: | GUIDE CHANGE L |
Парткод: | 302HP28140 |
Деталь: | GUIDE ENTRANCE |
Парткод: | 302HP28150 |
Деталь: | FRAME EXIT MIDDLE |
Парткод: | 302HP28190 |
Деталь: | PLATE EXIT DRIVE |
Парткод: | 302HP28220 |
Деталь: | SHAFT GEAR EXIT |
Парткод: | 302HP28230 |
Деталь: | SPRING ACT EXIT L |
Парткод: | 302HP28240 |
Деталь: | SPRING ACT EXIT R |
Парткод: | 302HP28250 |
Деталь: | HOLDER EXIT PULLEY |
Парткод: | 302HP28261 |
Деталь: | PLATE EXIT SOL |
Парткод: | 302HP28280 |
Деталь: | COVER PWB |
Парткод: | 302HP28290 |
Деталь: | PLATE EARTH EXIT |
Парткод: | 302HP28320 |
Деталь: | ARM SOLENOID |
Парткод: | 302HP28330 |
Деталь: | PLATE EARTH EXIT B |
Парткод: | 302HP28360 |
Деталь: | SHEET EXIT |
Парткод: | 302HP28370 |
Деталь: | EXIT PUSH |
Парткод: | 302HP28380 |
Деталь: | SEAL ACT |
Парткод: | 302HP28390 |
Деталь: | SPRING EXIT EARTH |
Парткод: | 302HP28400 |
Деталь: | ACTUATOR EXIT FULL |
Парткод: | 302HP28430 |
Деталь: | STATIC ELIMINATOR PR |
Парткод: | 302HP28450 |
Деталь: | GEAR Z58-Z21 |
Парткод: | 302HP31030 |
Деталь: | GEAR Z20 DU |
Парткод: | 302HP31040 |
Деталь: | GEAR Z31 |
Парткод: | 302HP31050 |
Деталь: | GEAR Z29 |
Парткод: | 302HP31060 |
Деталь: | MOTOR EXIT |
Парткод: | 302HP44010 |
Деталь: | SOLENOID EXIT |
Парткод: | 302HP44020 |
Деталь: | WIRE EXIT FULL |
Парткод: | 302HP46030 |
Деталь: | WIRE LEFT EXIT |
Парткод: | 302HP46040 |
Деталь: | PARTS,PRINTED W.BOARD JOB,SP |
Парткод: | 303KN94010 |
Деталь: | SPRING SOL A |
Парткод: | 303KN16180 |
Деталь: | SEAL ACT |
Парткод: | 303KN16311 |
Деталь: | PARTS,SOLENOID,SP |
Парткод: | 303KN94040 |
Деталь: | BUSHING 6 |
Парткод: | 3CY07080 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | PARTS EXIT ASSY |
Парткод: | 302HP93080 |
Коды ошибок
0150
0160
0420
1010
1020
1030
1040
1100
1110
1120
1130
1900
1950
2101
2102
2201
2202
2203
2204
2300
2400
2500
2600
2810
5101
5102
5103
5104
5301
5302
5303
5304
6000
6010
6020
6030
6050
6100
6120
6130
6400
7000
7101
7102
7103
7104
7200
7210
7220
7230
7240
7250
7401
7402
7403
7404
7411
7412
7413
7414
7420
7800
7810
7901
7902
7903
7904
7911
7912
7913
7914
8020
8030
8050
8060
8070
8140
8170
8180
8210
8220
8230
8300
8310
8320
8330
8340
8350
8360
8440
8460
8500
8510
8900
8910
8920
8930
9530-9550
F000
F010
F020
F030
F040
F226
Описание
Error code: | 0150 |
Description: | Even though the machine carries out the regular movement, the output of Slider Sensor does not reach the expected value. |
Causes: | Slider Motor has a problem. Slider Sensor has a problem. Wiring or Flexible Cable has short circuitted or cut-line. Servo Board has a problem. |
Remedy: | Check Cable connection of Servo Board Check Cable connection of Junction Board Slider Motor replacement Slider Sensor replacement Wiring or Flexible Cable replacement Servo Board replacement |
Error code: | 0160 |
Description: | Even though the machine carries out the regular movement, the output of Pressure Pump 1 Sensor does not reach the expected value. |
Causes: | Pressure Pump 1 Motor has a problem. Pressure Pump 1 Sensor has a problem. Pressure Pump 1 Magnet has dropped out. Wiring or Flexible Cable has short circuitted or cut-line. Pump Drive Board has a problem. Servo Board has a problem. |
Remedy: | Check Cable connection of Servo Board Check Cable connection of Junction Board Check Pressure Pump 1 Magnet Pressure Pump 1 Motor replacement Pressure Pump 1 Sensor replacement Wiring or Flexible Cable replacement Pump Drive Board replacement Servo Board replacement |
Error code: | 0420 |
Description: | Paper feeder communication error Communication error between control PWB and optional paper feeder. |
Causes: | Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF main-PWB. |
Remedy: | Improper installation paper feeder. Follow installation instruction carefully again. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness. Defective control PWB. Replace the control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Reinsert the connector. Also check for continuity within the connector harness. If none, remedy or replace the harness (Refer to the service manual for the paper feeder). Defective PF main- PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
Error code: | 1010 |
Display: | Problem with Printhead L/R Chk printing results |
Description: | Lift motor 1 error After cassette 1 is inserted, lift sensor 1 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s. This error is detected 4 times successively. |
Causes: | Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective lift motor 1. Defective engine PWB. |
Remedy: | Cassette lift base elevating mechanism Check that the cassette base can be manipulated smoothly, if not, repair or replace. Lift motor 1 1. Check that the cassette base has been ascended. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift motor 1 and Feed PWB 2 (YC3) Feed PWB 2 (YC1) and Engine PWB (YC4) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the lift motor 1. Lift sensor 1 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift sensor 1 and Feed PWB 2 (YC8) Feed PWB 2 (YC1) and Engine PWB (YC4) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the lift sensor1. Feed PWB 2 Replace the Feed PWB 2. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 1020 |
Description: | Lift motor 2 error After cassette 2 is inserted, lift sensor 2 does not turn on within 12 s. This error is detected 4 times successively. The lock signal of the motor is detected continuously for 1 s. This error is detected 4 times successively. |
Causes: | Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective lift motor 2. Defective engine PWB. |
Remedy: | Cassette lift base elevating mechanism Check that the cassette base can be manipulated smoothly, if not, repair or replace. Lift motor 2 1. Check that the cassette base has been ascended. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift motor 2 and Feed PWB 2 (YC3) Feed PWB 2 (YC1) and Engine PWB (YC4) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the lift motor 2. Lift sensor 2 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Lift sensor 2 and Feed PWB 2 (YC8) Feed PWB 2 (YC1) and Engine PWB (YC4) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the lift sensor2. Feed PWB 2 Replace the Feed PWB 2. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 1030 |
Display: | GARO W1221 |
Description: | PF lift motor 1 error (paper feeder) After cassette 3 is inserted, PF lift sensor 1 does not turn on within 12 s. This error is detected 5 times successively. During driving the motor, the lift overcurrent protective monitor signal is detected for 1 s or more 5 times successively. However, the first 1 s after motor is turned on is excluded from detection. |
Causes: | Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective PF lift motor 1. Defective PF main PWB. |
Remedy: | Defective bottom plate elevation mechanism in the cassette. Check to see if the bottom plate can move smoothly and repair it if any problem is found. Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF lift motor 1 and PF main PWB (YC7) Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any. Defective PF lift motor 1. Replace the PF lift motor 1. Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
Error code: | 1040 |
Display: | GL2: W0501 The memory is full. |
Description: | PF lift motor 2 error (paper feeder) After cassette 4 is inserted, PF lift sensor 2 does not turn on within 12 s. This error is detected 5 times successively. During driving the motor, the lift overcurrent protective monitor signal is detected for 1 s or more 5 times successively. However, the first 1 s after motor is turned on is excluded from detection. |
Causes: | Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective PF lift motor 2. Defective PF main PWB. |
Remedy: | Defective bottom plate elevation mechanism in the cassette. Check to see if the bottom plate can move smoothly and repair it if any problem is found. Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. PF lift motor 2 and PF main PWB (YC7) Defective drive transmission system of motor. Check if the gears rotate smoothly. If not, grease the bushes and gears. Check for broken gears and replace if any. Defective PF lift motor 2. Replace the PF lift motor 2. Defective PF main PWB. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
Error code: | 1100 |
Display: | Prepare for maint cart replacement. |
Description: | Paper Jam There is paper jammed in the All-In-One. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective PF lift motor 1. Defective PF main PWB. |
Remedy: | Clear the paper jam, and resend the print job. |
Error code: | 1110 |
Description: | PF lift motor 2 error (large capacity feeder) After cassette 4 is inserted, PF lift sensor 2 does not turn on within 23 s. This error is detected 5 times successively. (Time to detect is 2 seconds at the second time and later.) During driving the motor, the lift overcurrent protective monitor signal is detected for 200 ms or more 5 times successively. However, the first 1 s after PF lift motor 2 is turned on is excluded from detection. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective PF lift motor 2. Defective PF main PWB. |
Remedy: | Paper feeder lift base elevating mechanism Check that the cassette base can be manipulated smoothly, if not, repair or replace. PF Lift motor 2 1. Check that the cassette base has been ascended. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF Lift motor 2 and PF main PWB (YC7) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the PF Lift motor2. PF Lift sensor2 1. Check that the sensor is correctly positioned. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF Lift sensor 2 and PF main PWB (YC4) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the PF Lift sensor 2. PF main PWB Replace the PF main PWB (Refer to the service manual for the paper feeder). |
Error code: | 1120 |
Description: | Paper feeder left lift position problem (optional 3000-sheet paper feeder) Paper feeder switch 1 does not turn on within 30 s of paper feeder lift motor 2 turning on. |
Causes: | Poor contact in the connector terminals. Defective paper feeder lift switch 1. Defective paper feeder lift motor 2. The paper feeder left lift does not rise properly. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector on the engine PWB and the connector on the paper feeder main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective paper feeder lift switch 1. Check if YC5-4 on the paper feeder main PWB goes low when paper feeder lift switch 1 is turned off. If not, replace paper feeder lift switch 1. Defective paper feeder lift motor 2. Check for continuity across the coil. If none, replace paper feeder lift motor 2. The paper feeder left lift does not rise properly. Check the gears and belts, and remedy if necessary. |
Error code: | 1130 |
Description: | Paper feeder right lift position problem (optional 3000-sheet paper feeder) Paper feeder switch 2 does not turn on within 30 s of paper feeder lift motor 1 turning on. |
Causes: | Poor contact in the connector terminals. Defective paper feeder lift switch 2. Defective paper feeder lift motor 1. The paper feeder right lift does not rise properly. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector on the engine PWB and the connector on the paper feeder main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective paper feeder lift switch 2. Check if YC5-7 on the paper feeder main PWB goes low when paper feeder lift switch 2 is turned off. If not, replace paper feeder lift switch 2. Defective paper feeder lift motor 1. Check for continuity across the coil. If none, replace paper feeder lift motor 1. The paper feeder right lift does not rise properly. Check the gears and belts, and remedy if necessary. |
Error code: | 1900 |
Description: | Paper feeder EEPROM error When writing the data, read and write data does not match 3 times in succession. |
Causes: | Defective PF main PWB. Device damage of EEPROM. |
Remedy: | PF main PWB (EEPROM) 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. 2. Replace the PF main PWB (Refer to the service manual for the paper feeder). |
Error code: | 1950 |
Description: | Intermediate transfer belt unit EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated 5 times successively. Mismatch of reading data from 2 locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective transfer belt unit. |
Remedy: | Transfer belt sensor 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Engine PWB (YC27) and RFID PWB (4P connector) (Check wirings on the RFID side since the signal line for the intermediate transfer belt sensor EEPROM on the engine PWB and the signal line for the toner container RFID are the same.) Intermediate transfer belt unit and Engine PWB (YC3) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Intermediate transfer belt unit. |
Error code: | 2101 |
Description: | Developer motor error After developer motor is driven, the ready signal does not turn to L within 2 s. After developer motor is stabilized, the ready signal is at the H level for 1 s continuously. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective developer motor. Defective engine PWB. |
Remedy: | Developer unit 1. Check that the developer waste lock has been released and, if not, release the lock. 2. Check that the gears and spiral screw of the developer unit are not damaged. 3. Confirm that the developer roller can rotate. 4. If it won`t rotate, replace the developer unit. Developer motor 1. To check the motor operation, execute DLP(K) by U030. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer motor and Feed PWB 1 (YC8) Feed PWB 1 (YC2) and Engine PWB (YC5) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Developer motor. Engine PWB. 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 2102 |
Description: | Developer motor C error After developer motor C is driven, the ready signal does not turn to L within 5 s. After developer motor C is stabilized, the ready signal is at the H level for 5 s continuously. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective developer motor C. Defective engine PWB. |
Remedy: | Developer unit C 1. Check that the developer waste lock has been released and, if not, release the lock. 2. Check that the gears and spiral screw of the developer unit are not damaged. 3. Confirm that the developer roller can rotate. 4. If it won`t rotate, replace the developer unit. Developer motor C 1. To check the motor operation, execute DLP(C) by U030. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer motor C and Motor control PWB (YC7) Motor control PWB (YC3) and Engine PWB (YC9) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Developer motor C. Motor control PWB Replace the Motor control PWB Engine PWB. 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 2201 |
Description: | drum motor steady-state error After drum motor is stabilized, the ready signal is at the H level for 1 s continuously. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective drum motor. Defective engine PWB. |
Remedy: | Drum unit 1. Confirm that the drum or the drum screw can rotate. 2. If it won’t rotate, replace the drum unit. Drum motor 1. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. drum motor and Feed PWB 1 (YC9) Feed PWB 1 (YC2) and Engine PWB (YC5) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the drum motor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 2202 |
Description: | Drum motor C steady-state error The motor revolution fluctuates more than +/-6.2% of the normal revolution for 5s continuously, after the drum motor C has stabilized. The counter achieved by timer capture is less than 2200 in 10 times in a row. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective drum motor C. Defective engine PWB. |
Remedy: | Drum unit 1. Execute U030 Belt Meand (transfer Motor) and check that the drum motor can rotate. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the drum or the drum screw can rotate. 4. If it won’t rotate, replace the drum unit. Drum motor C 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Drum motor C and Motor control PWB (YC4) Motor control PWB (YC3) and Engine PWB (YC9) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum motor C. Motor control PWB Replace the Motor control PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 2203 |
Description: | Drum motor M steady-state error The motor revolution fluctuates more than +/-6.2% of the normal revolution for 5s continuously, after the drum motor M has stabilized. The counter achieved by timer capture is less than 2200 in 10 times in a row. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective drum motor M. Defective engine PWB. |
Remedy: | Drum unit 1. Execute U030 Belt Meand (transfer Motor) and check that the drum motor can rotate. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the drum or the drum screw can rotate. 4. If it won’t rotate, replace the drum unit. Drum motor M 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Drum motor M and Motor control PWB (YC5) Motor control PWB (YC3) and Engine PWB (YC9) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum motor M. Motor control PWB Replace the Motor control PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 2204 |
Description: | Drum motor Y steady-state error The motor revolution fluctuates more than +/-6.2% of the normal revolution for 5s continuously, after the drum motor Y has stabilized. The counter achieved by timer capture is less than 2200 in 10 times in a row. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective drum motor Y. Defective engine PWB. |
Remedy: | Drum unit 1. To check the motor operation, execute U030 Belt Meand (transfer motor).. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the drum or the drum screw can rotate. 4. If it won’t rotate, replace the drum unit. Drum motor Y 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Drum motor Y and Motor control PWB (YC5) Motor control PWB (YC3) and Engine PWB (YC9) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum motor Y. Motor control PWB Replace the Motor control PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 2300 |
Description: | Fuser motor error After fuser motor is driven, the ready signal does not turn to L within 2 s. After fuser motor is stabilized, the ready signal is at the H level for 1 s continuously. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective fuser motor. Defective engine PWB. |
Remedy: | Fuser motor 1. To check the motor operation, execute U030 Fuser (Fuser motor). 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser motor and Feed PWB 1(YC18) Feed PWB 1(YC1) and Engine PWB (YC6) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the fuser motor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Feed PWB 1 Replace the Feed PWB 1. Fuser unit Replace the fuser unit. |
Error code: | 2400 |
Description: | Eject motor error After the motor drive ON signal is output and 1 s elapses, the rated speed reach signal is not input continuously for 2 s. |
Causes: | Poor contact in the connector terminals. Defective drive transmission system. Defective engine PWB. Defective eject motor. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC27 on the engine PWB and the connector on the eject motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective engine PWB. Run maintenance item U030 and check if YC27-B4 (remote signal) on the engine PWB goes low. If not, replace the engine PWB. Defective eject motor. Run maintenance item U030 and check if the eject motor operates when YC27-B4 (remote signal) on the engine PWB goes low. If not, replace the eject motor. |
Error code: | 2500 |
Description: | Paper feed motor error After paper feed motor is driven, the ready signal does not turn to L within 2 s. After paper feed motor is stabilized, the ready signal is at the H level for 1 s continuously. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective paper feed motor. Defective engine PWB. |
Remedy: | Paper feed motor 1. To check the motor operation execute U030 Feed (paper feed motor). 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Paper feed motor and Feed PWB 2(YC2) Feed PWB 2(YC1) and Engine PWB (YC4) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the paper feed motor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 2600 |
Description: | PF paper feed motor error (large capacity feeder) After PF paper feed motor is driven, the ready signal does not turn to L within 2 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective drive transmission system of motor. Defective PF paper feed motor. Defective PF main PWB. |
Remedy: | PF paper feed motor 1. To check the feed unit operation, execute U247 LCF- Motor ON. 2. Check the paper feed roller and drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. PF paper feed motor and PF main PWB (YC16) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the paper feed motor. PF main PWB Replace the PF main PWB (Refer to the service manual for the paper feeder). |
Error code: | 2810 |
Description: | Inner waste toner motor error Initialized when an error is constantly observed for 2 seconds after the inner waste toner motor is activated. An error is detected twice for 2.5 seconds after rebooting. The lock detect signal won’t be H level three times in a row within 200 ms at 1.25 ms cycles after the inner waste toner motor has been driven. |
Causes: | Defective connector cable or poor contact in the connector Defective drive transmission system of motor. Defective waste toner motor. Defective engine PWB. |
Remedy: | Waste toner box 1. Rotate the waste toner spiral by the hand and check that they are not unusually loaded. 2. If the spiral won’t rotate, replace the waste toner tank. Waste toner motor 1. Rotate the drive gear by the hand and check that they are not unusually loaded. 2. Clean the drive gears and the axle holder. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Waste toner motor and Front PWB (YC16) Front PWB (YC3) and Engine PWB (YC7) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the waste toner motor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 5101 |
Description: | Main high-voltage error K Measure the inflowing current when Vpp is varied in 3 steps and verify if the difference of the currents of 0 and step 2 is less than 42 (51 if lower highvoltage board). |
Causes: | Defective connector cable or poor contact in the connector. Defective high voltage PWB Defective engine PWB. |
Remedy: | Drum unit 1. Confirm that the drum or the drum screw can rotate. 2. If it won’t rotate, replace the drum unit. 3. Check that the discharger lamp is properly connected. Charger roller unit 1. Check that the high-voltage contacts are not distorted or adhered with foreign objects. 2. Reinstall the chrager roller unit.Or, replace the charger roller unit. High voltage PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. High voltage PWB (YC2) and Engine PWB (YC16) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the High voltage PWB. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 5102 |
Description: | Main high-voltage error C Measure the inflowing current when Vpp is varied in 3 steps and verify if the difference of the currents of 0 and step 2 is less than 42 (51 if lower highvoltage board). |
Causes: | Defective connector cable or poor contact in the connector. Defective high voltage PWB 1. Defective engine PWB. |
Remedy: | Drum unit 1. Execute U030 Belt Mean Drum Motor and check that the drum motor can rotate. 2. Confirm that the drum or the drum screw can rotate. 3. Check that the discharger lamp is properly connected. 4. If it won’t rotate, replace the drum unit. Charger roller unit 1. Check that the high-voltage contacts are not distorted or adhered with foreign objects. 2. Reinstall the chrager roller unit.Or, replace the charger roller unit. High voltage PWB 1 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. High voltage PWB 1(YC2) and Engine PWB (YC16) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the High voltage PWB 1. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 5103 |
Description: | Main high-voltage error M Measure the inflowing current when Vpp is varied in 3 steps and verify if the difference of the currents of 0 and step 2 is less than 42 (51 if lower highvoltage board). |
Causes: | Defective connector cable or poor contact in the connector. Defective high voltage PWB 1. Defective engine PWB. |
Remedy: | Drum unit 1. Execute U030 Belt Mean Drum Motor and check that the drum motor can rotate. 2. Confirm that the drum or the drum screw can rotate. 3. Check that the discharger lamp is properly connected. 4. If it won’t rotate, replace the drum unit. Charger roller unit 1. Check that the high-voltage contacts are not distorted or adhered with foreign objects. 2. Reinstall the chrager roller unit.Or, replace the charger roller unit. High voltage PWB 1 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. High voltage PWB 1(YC3) and Engine PWB (YC17) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the High voltage PWB 1. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 5104 |
Description: | Main high-voltage error Y Measure the inflowing current when Vpp is varied in 3 steps and verify if the difference of the currents of 0 and step 2 is less than 42 (51 if lower highvoltage board). |
Causes: | Defective connector cable or poor contact in the connector. Defective high voltage PWB 1. Defective engine PWB. |
Remedy: | Drum unit 1. Execute U030 Belt Mean Drum Motor and check that the drum motor can rotate. 2. Confirm that the drum or the drum screw can rotate. 3. Check that the discharger lamp is properly connected. 4. If it won’t rotate, replace the drum unit. Charger roller unit 1. Check that the high-voltage contacts are not distorted or adhered with foreign objects. 2. Reinstall the chrager roller unit.Or, replace the charger roller unit. High voltage PWB 1 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. High voltage PWB 1(YC1) and Engine PWB (YC16) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the High voltage PWB 1. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 5301 |
Description: | Broken cleaning lamp K wire When the cleaning lamp K is driven, the lamp over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals. |
Causes: | Defective connector cable or poor contact in the connector. Defective cleaning lamp K. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Drum unit K and Drum relay PWB (YC2) Drum relay PWB (YC1) and engine PWB (YC34) Defective cleaning lamp K. Replace the drum unit K. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 5302 |
Description: | Broken cleaning lamp C wire When the cleaning lamp C is driven, the lamp over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals. |
Causes: | Defective connector cable or poor contact in the connector. Defective cleaning lamp C. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Drum unit C and Drum relay PWB (YC4) Drum relay PWB (YC1) and engine PWB (YC34) Defective cleaning lamp C. Replace the drum unit C. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 5303 |
Description: | Broken cleaning lamp M wire When the cleaning lamp M is driven, the lamp over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals. |
Causes: | Defective connector cable or poor contact in the connector. Defective cleaning lamp M. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Drum unit M and Drum relay PWB (YC3) Drum relay PWB (YC1) and engine PWB (YC34) Defective cleaning lamp M. Replace the drum unit M. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 5304 |
Description: | Broken cleaning lamp Y wire When the cleaning lamp Y is driven, the lamp over-current detection signal is detected continuously for 10 times (1 s) at 100 ms intervals. |
Causes: | Defective connector cable or poor contact in the connector. Defective cleaning lamp Y. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Drum unit Y and Drum relay PWB (YC5) Drum relay PWB (YC1) and engine PWB (YC34) Defective cleaning lamp Y. Replace the drum unit Y. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 6000 |
Description: | Broken fuser heater wire Fuser thermistor 1 does not reach 100° C/212 °F even after 30 s during warming up. The detected temperature of fuser thermistor 1 does not reach the specified temperature (ready indication temperature) for 420 s in warming up after reached to 100° C/212 °F. |
Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Power source PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Power source PWB (YC3) and fuser heater PWB (YC3) Fuser heater PWB (YC2) and feed PWB 1 (YC27) Feed PWB 1 (YC1) and Engine PWB (YC6) Fuser heater 1. Replace the fuser unit. |
Error code: | 6010 |
Description: | Abnormally high fuser thermistor temperature The fuser Abnormally high signal is detected for 60 s or more. |
Causes: | Defective PWB. |
Remedy: | Defective PWB. Replace the power source PWB or engine PWB and check for correct operation. |
Error code: | 6020 |
Description: | Abnormally high fuser thermistor 1 temperature Fuser thermistor 1 detects a temperature higher than 240°C/464°F for 1 s. |
Causes: | Deformed connector pin. Defective triac. Shorted fuser thermistor 1. Defective engine PWB. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 6030 |
Description: | Broken fuser thermistor 1 wire Input from fuser center thermistor 1 is 1010 or more (A/D value) continuously for 1 s. Verify if A/D read in the differential output won’t change by 4 or more when it was turned on for 10 seconds in a lowtemperature environment. |
Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 1 wire. Fuser thermostat triggered. Defective fuser heater. Defective engine PWB. |
Remedy: | Fuser unit 1. Check that no paper jam is present. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the Fuser unit. (Deteriorated sensitivity due to the toner adhered to the center thermistor.) Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Fuser thermistor 1 1. Replace the Fuser unit. Fuser thermostat (triggered) 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and fuser heater PWB (YC1) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. |
Error code: | 6050 |
Description: | Abnormally low fuser thermistor 1 temperature Fuser thermistor 1 detects a temperature lower than 100°C/212°F for 1 s after warming up, during ready or during print. |
Causes: | Deformed connector pin. Defective triac. Defective fuser thermistor 1. Defective fuser heater. Defective engine PWB. |
Remedy: | Power source 1. Check that the operating voltage falls within +/-10%. 2. Check no voltage drop is caused. The heater is deactivated at 70V or lower. 3. Relocate the AC outlet that supplies power. Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 1. Replace the engine PWB. Fuser thermistor 1 1. Replace the Fuser unit. Fuser thermostat (triggered) 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and fuser heater PWB (YC1) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. |
Error code: | 6100 |
Description: | Broken fuser heater wire Fuser thermistor 5 won’t reach the reference temperature in 480 s after shifting to low power mode. |
Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 5 wire. Defective engine PWB. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 6120 |
Description: | Abnormally high fuser press thermistor 5 temperature Fuser press thermistor 5 detects a temperature higher than 190°C/ 374°F for 1 s. |
Causes: | Deformed connector pin. Defective triac. Shorted fuser thermistor 5. Defective engine PWB. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 6130 |
Description: | Broken fuser press thermistor 5 wire The input from the fuser press thermistor 5 has been less than 30°C/ 86°F (A/D: greater thann992) for 60 seconds continuously. |
Causes: | Defective connector cable or poor contact in the connector. Deformed connector pin. Defective triac. Broken fuser thermistor 5 wire. Defective fuser IH. Defective engine PWB. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser unit and Engine PWB (YC26) Fuser IH PWB(YC4) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Fuser unit. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. Fuser IH PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser IH PWB(YC4) and Engine PWB (YC26) 2. Replace the fuser IH PWB. Fuser IH unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser IH unit and Fuser IH PWB (YC9 and 10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the fuser IH unit. |
Error code: | 6400 |
Display: | No Belt Unit Open the Front Cover, pull out all Drum Units completely and install the Belt Unit. |
Description: | Zero-cross signal error While fuser heater ON/OFF control is performed, the zerocross signal is not input within 3 s. |
Causes: | Fuser unit. |
Remedy: | Fuser unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Fuser heater PWB (YC2) and feed PWB 1 (YC27) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the fuser heater PWB. |
Error code: | 7000 |
Display: | Jam Inside Open the Front Cover, pull out all four drum and toner cartridge assemblies and remove the jammed paper. |
Description: | Toner motor problem The rated speed achievement signal won’t turn to L in 5 s since the motor is activated. The rated speed achievement signal turns to H every other 5 s after the machine is stabilized. |
Causes: | Poor contact in the connector terminals. Broken the gear. Defective toner motor M/C/Y/BK. Defective engine PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC30 on the engine PWB and the connector on the toner motor, and the continuity across the connector terminals. Repair or replace if necessary. Broken the gear. Check visually and replace the gear if necessary. Defective toner motor M/C/Y/BK. Run maintenance item U135 and check if the toner motor operates. If not, replace the toner motor. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 7101 |
Description: | Toner sensor error Sensor output value of 60 or less or 944 or more continued for 3 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective toner sensor. Defective engine PWB. |
Remedy: | Failure of locking the developer waste slot at setup. If an abnormal noise is heard, check that the developer ejection outlet is released and, if not, release the outlet. Toner sensor 1. Check the toner sensor output by U155. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner sensor and Front PWB (YC7) Front PWB (YC2) and Engine PWB (YC8) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Check that the gears of the Developer unit are not damaged and the spiral can rotate. 5. Replace the Developer unit. Toner motor 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7102 |
Description: | Toner sensor C error Sensor output value of 60 or less or 944 or more continued for 3 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective engine PWB. |
Remedy: | Failure of locking the developer waste slot at setup. If an abnormal noise is heard, check that the developer ejection outlet is released and, if not, release the outlet. Toner sensor C 1. Check the toner sensor output by U155. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner sensor C and Front PWB (YC13) Front PWB (YC2) and Engine PWB (YC10) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Check that the gears of the developer unit C are not damaged and the spiral can rotate. 5. Replace the Developer unit C. Toner motor C 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor C and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor C. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7103 |
Description: | Toner sensor M error Sensor output value of 60 or less or 944 or more continued for 3 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective engine PWB. |
Remedy: | Failure of locking the developer waste slot at setup. If an abnormal noise is heard, check that the developer ejection outlet is released and, if not, release the outlet. Toner sensor M 1. Check the toner sensor output by U155. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner sensor M and Front PWB (YC11) Front PWB (YC2) and Engine PWB (YC10) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Check that the gears of the developer unit M are not damaged and the spiral can rotate. 5. Replace the Developer unit M. Toner motor M 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor M and and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor M. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7104 |
Description: | Toner sensor Y error Sensor output value of 60 or less or 944 or more continued for 3 s. |
Causes: | Defective connector cable or poor contact in the connector Defective engine PWB. |
Remedy: | Failure of locking the developer waste slot at setup. If an abnormal noise is heard, check that the developer ejection outlet is released and, if not, release the outlet. Toner sensor Y 1. Check the toner sensor output by U155. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner sensor Y and Front PWB (YC15) Front PWB (YC2) and Engine PWB (YC10) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Check that the gears of the developer unit Y are not damaged and the spiral can rotate. 5. Replace the Developer unit Y. Toner motor Y 1. Draw out the toner container and execute U135 to check the toner motor operation. 2. Check the drive gear can rotate or they are not unusually loaded and, if necessary, replace. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Toner motor Y and Engine PWB (YC27) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the Toner motor Y. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7200 |
Display: | Jam MP Tray Remove the jammed paper from MP Tray and press [Retry]. |
Description: | Broken outer temperature sensor 2 wire The sensor input sampling is greater than 230. |
Causes: | Defective connector cable or poor contact in the connector. Defective outer temperature sensor. Defective engine PWB. |
Remedy: | Outer temperature sensor 2 1. Confirm Ext/Int is displayed by U139 temperature and humidity. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Outer temperature sensor 2 and Front PWB (YC8) Front PWB (YC2) and Engine PWB (YC8) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the outer temperature sensor 2. Front PWB Replace the front PWB. Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7210 |
Description: | Short-circuited outer temperature sensor The sensor input sampling is less than 69. |
Causes: | Defective connector cable or poor contact in the connector. Defective outer temperature sensor. Defective engine PWB. |
Remedy: | Outer temperature sensor 2 1. Confirm Ext/Int is displayed by U139 temperature and humidity. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Outer temperature sensor 2 and Front PWB (YC8) Front PWB (YC2) and Engine PWB (YC10) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the outer temperature sensor 2. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7220 |
Description: | Broken internal thermistor 2 wire An abnormal value is detected in the input data to inner temperature sensor 2. |
Causes: | Poor contact in the connector terminals. Defective engine PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC28 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 7230 |
Description: | Short-circuited internal thermistor 2 An abnormal value is detected in the input data to inner temperature sensor 2. |
Causes: | Poor contact in the connector terminals. Defective engine PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC28 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 7240 |
Description: | Broken internal thermistor 3 wire An abnormal value is detected in the input data to inner temperature sensor 3. |
Causes: | Poor contact in the connector terminals. Defective engine PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC8 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 7250 |
Description: | Short-circuited internal thermistor 3 An abnormal value is detected in the input data to inner temperature sensor 3. |
Causes: | Poor contact in the connector terminals. Defective engine PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC8 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 7401 |
Description: | Developer unit type mismatch error Improper adaptation of the machine and developer unit is detected. |
Causes: | Defective connector cable or poor contact in the connector. Different type of the developer unit is installed. |
Remedy: | Different type of the developer unit is installed. Install the developer unit of the correct type. Developer unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer unit and Front PWB (YC7) Front PWB (YC2) and Engine PWB (YC8) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. |
Error code: | 7402 |
Description: | Developer unit C type mismatch error Absence of the developer unit C is detected. |
Causes: | Defective connector cable or poor contact in the connector. Different type of the developer unit is installed. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit C and front PWB (YC13) Front PWB (YC2) and engine PWB (YC10) Different type of the developer unit is installed. Install the correct developer unit. |
Error code: | 7403 |
Description: | Developer unit M type mismatch error Absence of the developer unit M is detected. |
Causes: | Defective connector cable or poor contact in the connector Different type of the developer unit is installed |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit M and front PWB (YC11) Front PWB (YC2) and engine PWB (YC10) Different type of the developer unit is installed. Install the correct developer unit. |
Error code: | 7404 |
Description: | Developer unit Y type mismatch error Absence of the developer unit Y is detected. |
Causes: | Defective connector cable or poor contact in the connector. Different type of the developer unit is installed. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Developer unit Y and front PWB (YC15) Front PWB (YC2) and engine PWB (YC10) Different type of the developer unit is installed. Install the correct developer unit. |
Error code: | 7411 |
Description: | Drum unit type mismatch error Improper adaptation of the machine and developer unit is detected. |
Causes: | Defective connector cable or poor contact in the connector. Different type of the drum unit is installed. |
Remedy: | Different type of the drum unit is installed. Install the drum unit of the correct type. Drum unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Drum unit and Front PWB (YC6) Front PWB (YC2) and Engine PWB (YC8) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. |
Error code: | 7412 |
Description: | Drum unit type Mismatch error (Cyan) Improper adaptation of the main unit and drum unit is detected. |
Causes: | Drum unit C |
Remedy: | Drum unit 1. Check if the drum unit of different models is attached, and replace it to the correct one. 2. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. Drum unit - Drum/Developer relay PWB Drum/Developer relay PWB - Engine PWB(YC6) 3. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. Drum/developer relay PWB Replace the drum/developer relay PWB Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB. |
Error code: | 7413 |
Description: | Drum unit type Mismatch error (Magenta) Improper adaptation of the main unit and drum unit is detected. |
Causes: | Drum unit M |
Remedy: | Drum unit 1. Check if the drum unit of different models is attached, and replace it to the correct one. 2. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. Drum unit - Drum/Developer relay PWB Drum/Developer relay PWB - Engine PWB(YC6) 3. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. Drum/developer relay PWB Replace the drum/developer relay PWB Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB. |
Error code: | 7414 |
Description: | Drum unit type Mismatch error (Yellow) Improper adaptation of the main unit and drum unit is detected. |
Causes: | Drum unit Y |
Remedy: | Drum unit 1. Check if the drum unit of different models is attached, and replace it to the correct one. 2. Confirm that the wiring connector is firmly connected, and if necessary, connect the connector all the way in. Drum unit - Drum/Developer relay PWB Drum/Developer relay PWB - Engine PWB(YC6) 3. If the wiring is disconnected, short-circuited or has a ground fault, replace the wire. Drum/developer relay PWB Replace the drum/developer relay PWB Engine PWB 1. Check the engine firmware and upgrade to the latest version if necessary. 2. Replace the engine PWB. |
Error code: | 7420 |
Description: | Transfer belt unit type mismatch problem Absence of the transfer belt unit is detected. |
Causes: | Transfer belt unit connector inserted incorrectly. Different type of the transfer belt unit is installed. Defective PWB. |
Remedy: | Transfer belt unit connector inserted incorrectly. Reinsert the transfer belt unit connector if necessary. Different type of the transfer belt unit is installed. Install the correct transfer belt unit. Defective PWB. Replace the engine PWB check for correct operation. |
Error code: | 7800 |
Description: | Broken outer temperature sensor wire The device did not respond for more than 5 ms during reading, in 5 times. |
Causes: | Defective connector cable or poor contact in the connector. Defective outer temperature sensor. Defective engine PWB. |
Remedy: | Outer temperature sensor 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Outer temperature sensor and Front PWB (YC8) Front PWB (YC2) and Engine PWB (YC8) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Outer temperature sensor. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7810 |
Description: | Short-circuited outer temperature sensor 1 The sensor input sampling is less than 0. |
Causes: | Defective connector cable or poor contact in the connector. Defective outer temperature sensor 1. Defective engine PWB. |
Remedy: | Defective connector cable or poor contact in the connector. Reinsert the connector. Also check for continuity within the connector cable. If none, replace the cable. Outer temperature sensor and front PWB (YC16) Front PWB (YC2) and engine PWB (YC10) Defective outer temperature sensor. Replace outer temperature sensor. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | 7901 |
Description: | Drum EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective drum PWB. |
Remedy: | DR PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DR PWB and Front PWB (YC6) Front PWB (YC2) and Engine PWB (YC8) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum unit. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7902 |
Description: | Drum C EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective drum PWB C. |
Remedy: | DR PWB- C 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DR PWB- C and Front PWB (YC12) Front PWB (YC2) and Engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum unit C. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7903 |
Description: | Drum M EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective drum PWB M. |
Remedy: | DR PWB- M 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DR PWB- M and Front PWB (YC10) Front PWB (YC2) and Engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum unit M. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7904 |
Description: | Drum Y EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective drum PWB Y. |
Remedy: | DRPWB- Y 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DRPWB- Y and Front PWB (YC14) Front PWB (YC2) and Engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Drum unit Y. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7911 |
Description: | Developer unit EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective developer unit. |
Remedy: | Developer unit 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer unit and Front PWB (YC7) Front PWB (YC2) and Engine PWB (YC8) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Developer unit. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7912 |
Description: | Developer unit C EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective developer unit C. |
Remedy: | Developer unit C 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer unit C and Front PWB (YC13) Front PWB (YC2) and Engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Developer unit C. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7913 |
Description: | Developer unit M EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective developer unit M. |
Remedy: | Developer unit M 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer unit M and Front PWB (YC11) Front PWB (YC2) and Engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Developer unit M. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 7914 |
Description: | Developer unit Y EEPROM error No response is issued from the device in reading/writing for 5 ms or more and this problem is repeated five times successively. Mismatch of reading data from two locations occurs 8 times successively. Mismatch between writing data and reading data occurs 8 times successively. |
Causes: | Defective connector cable or poor contact in the connector. Defective developer unit Y. |
Remedy: | Developer unit Y 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Developer unit Y and Front PWB (YC15) Front PWB (YC2) and Engine PWB (YC10) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the Developer unit Y. Front PWB Replace the front PWB Engine PWB 1. Check the engine software and upgrade to the latest, if necessary. 2. Replace the engine PWB. |
Error code: | 8020 |
Description: | Punch motor error 2 Home position is not obtained in 3 s after home position is initialized or in standby. |
Causes: | Defective connector cable or poor contact in the connector. Defective punch motor. Defective PWB. |
Remedy: | Punch motor 1. Execute U240 Motor - Punch to check the finisher operation. 2. Manipulate the punch up and down to check it can smoothly move up and down. 3. Check that the drive from the motor reaches the punch cam. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Punch motor and Punch PWB (YC4) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the punch motor. Punch PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Punch PWB (YC1) and DF main PWB (YC7) 2. Replace the punch PWB. DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher). |
Error code: | 8030 |
Description: | Punch motor error 3 Home position does not turn from On to Off in 50 ms after home position has been initialized. |
Causes: | Defective connector cable or poor contact in the connector. Defective punch motor. Defective PWB. |
Remedy: | Punch motor 1. Execute U240 Motor - Punch to check the finisher operation. 2. Manipulate the punch up and down to check it can smoothly move up and down. 3. Check that the drive from the motor reaches the punch cam. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Punch motor and Punch PWB (YC4) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the punch motor. Punch PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. Punch PWB (YC1) and DF main PWB (YC7) 2. Replace the punch PWB. DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher). |
Error code: | 8050 |
Description: | Paper conveying belt motor 1 problem (optional 3000-sheet document finisher) Paper conveying belt home position sensor 1 does not turn off within 1.5 s. Paper conveying belt home position sensor 1 does not turn on within 2.5 s. Jam 88 is indicated. |
Causes: | Poor contact in the connector terminals. Defective paper conveying belt home position sensor 1. Defective paper conveying belt motor 1. Defective PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC2 on the internal tray PWB and the connector on paper conveying belt motor 1, and the continuity across the connector terminals. Repair or replace if necessary. Defective paper conveying belt home position sensor 1. Replace paper conveying belt home position sensor 1. Defective paper conveying belt motor 1. Replace paper conveying belt motor 1. Defective PWB. Replace the internal tray PWB or finisher main PWB and check for correct operation. |
Error code: | 8060 |
Description: | Paper conveying belt motor 2 problem (optional 3000-sheet document finisher) Paper conveying belt home position sensor 2 does not turn off within 1.5 s. Paper conveying belt home position sensor 2 does not turn on within 1.5 s. |
Causes: | Poor contact in the connector terminals. Defective paper conveying belt home position sensor 2. Defective paper conveying belt motor 2. Defective PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC6 on the internal tray PWB and the connector on paper conveying belt motor 2, and the continuity across the connector terminals. Repair or replace if necessary. Defective paper conveying belt home position sensor 2. Replace paper conveying belt home position sensor 2. Defective paper conveying belt motor 2. Replace paper conveying belt motor 2. Defective PWB. Replace the internal tray PWB or finisher main PWB and check for correct operation. |
Error code: | 8070 |
Description: | Internal tray communication error (optional 3000-sheet document finisher) Communication with the internal tray is not possible although the connection is detected. |
Causes: | Poor contact in the connector terminals. Defective PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC6 on the finisher main PWB and the connector YC1 on the internal tray PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective PWB. Replace the internal tray PWB or finisher main PWB and check for correct operation. |
Error code: | 8140 |
Description: | DF tray motor error 1 When the main tray has ascended, DF tray sensor 1 or DF tray upper surface sensor does not turn on within 20 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective sensor. Defective DF tray motor. Defective DF main PWB. |
Remedy: | DF tray motor 1. Execute U240 Motor - Tray to check the finisher operation. 2. Manipulate the main tray up and down to check it is smoothly operable. 3. Check that the drive from the motor reaches the main tray. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF tray motor and DF Main PWB(YC16) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the DF tray motor. DF tray sensor 1 DF tray upper surface sensor 1. Execute U241 Finisher - Tray U-Limit, Tray Top to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF tray sensor 1 and DF Main PWB(YC22) DF tray upper surface sensor and DF Main PWB(YC21,YC13) 4. Replace the DF tray sensor 1 or DF tray upper surface sensor. DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher). |
Error code: | 8170 |
Description: | DF side registration motor 1 error 1 When initial operation, DF side registration sensor 1 does not turn on within 3 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective DF side registration sensor 1. Defective DF side registration motor 1. Defective DF main PWB. |
Remedy: | DF side registration motor 1 1. Execute U240 Motor - Width Test to check the finisher operation. 2. Manipulate the front side registration guide to check it is smoothly operable. 3. Check that the drive from the motor reaches the front side registration guide. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF side registration motor 1 and DF main PWB (YC15) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the DF side registration motor 1. DF side registration sensor 1 1. Execute U241 Finisher - Width Front to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF side registration sensor 1. and DF main PWB (YC22) 4. Replace the DF side registration sensor 1. DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher). |
Error code: | 8180 |
Description: | DF side registration motor 1 error 2 JAM6810 (jam in front of width alignment) is detected twice. |
Causes: | Defective connector cable or poor contact in the connector. Defective DF side registration sensor 1. Defective DF side registration motor 1. Defective DF main PWB. |
Remedy: | DF side registration motor 1 1. Execute U240 Motor - Width Test to check the finisher operation. 2. Manipulate the front side registration guide back and forth to check it is smoothly operable. 3. Check that the drive from the motor reaches the front side registration guide. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF side registration motor 1 and DF main PWB (YC15) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the DF side registration motor 1. DF side registration sensor 1. 1. Execute U241 Finisher - Width Front to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF side registration sensor 1. and DF main PWB (YC22) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the DF side registration sensor 1. DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher). |
Error code: | 8210 |
Description: | DF slide motor error When initial operation, DF staple sensor does not turn on within 3 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective DF staple sensor. Defective DF slide motor. Defective DF main PWB. |
Remedy: | DF slide motor 1. Execute U240 Motor - Staple Move to check the finisher operation. 2. Manipulate the staple unit back and forth to check it is smoothly operable. 3. Check that the drive from the motor reaches the staple unit. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF slide motor and DF main PWB (YC12) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the DF slide motor. DF staple sensor 1. Execute U241 Finisher - Width Staple HP to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF staple sensor and DF main PWB (YC22) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the DF staple sensor. DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher). |
Error code: | 8220 |
Description: | Stapler shift motor 2 error (optional 3000-sheet document finisher) When operation returned to a home position is performed at the time of initial operation and a home position is not detected even if 3.5 s passed. |
Causes: | Poor contact in the connector terminals. Defective stapler shift motor 2. Defective finisher main PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC10 on the finisher main PWB and the connector of stapler shift motor 2, and the continuity across the connector terminals. Repair or replace if necessary. Defective stapler shift motor 2. Replace stapler shift motor 2. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation. |
Error code: | 8230 |
Description: | DF staple motor error 1 Staple JAM (DF) has been detected twice in a row. (The second JAM detection condition fullfilled with the home position did not detected in 600 ms after the motor was driven.) |
Causes: | Defective connector cable or poor contact in the connector. Defective DF staple sensor. Defective DF staple motor. Defective DF main PWB. |
Remedy: | DF staple motor 1. Remove the staple unit and check that stapling is possible without a jam. 2. Confirm that the FFC wiring connector is not distorted and connect the FFC wiring all the way in. Staple unit and DF main PWB (YC17) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the staple unit. (Refer to the service manual for the document finisher). DF staple sensor Replace the staple unit. DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher). |
Error code: | 8300 |
Description: | CF unit communication error Communication with the center- folding unit is not possible. |
Causes: | Defective connector cable or poor contact in the connector. Defective CF set sensor. Defective PWB. |
Remedy: | CF unit set switch 1. Execute U241 Booklet - Set to check the finisher switch. 2. Check that the switch and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF main PWB (YC7) and DF main PWB (YC9) 4. If the wiring is disconnected, shorted or grounded, replace the wiring. 5. Replace the CF unit set switch. CF main PWB Replace the CF main PWB DF main PWB Replace the DF main PWB (Refer to the service manual for the document finisher). |
Error code: | 8310 |
Description: | CF side registration motor 2 error When initial operation, CF side registration sensor 2 does not turn on within 1 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective CF side registration sensor 2. Defective CF side registration motor 2. Defective CF main PWB. |
Remedy: | CF side registration motor 2 1. Execute U240 Booklet - Width Test to check finisher operation check. 2. Manipulate the side registration upper guide back and forth to check it can smoothly move back and forth. 3. Check that the drive from the motor reaches the side registration upper guide. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF side registration motor 2 and CF main PWB (YC10) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the CF side registration motor. CF side registration sensor 2 1. Execute U241 Booklet - Width Up HP to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF side registration sensor 2 and CF main PWB (YC20) 4. Replace the CF side registration sensor 2. CF main PWB Replace the CF main PWB |
Error code: | 8320 |
Description: | CF adjustment motor error When initial operation, CF adjustment sensor does not turn on within 2.5 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective CF adjustment sensor 1, 2. Defective CF adjustment motor 1, 2. Defective CF main PWB. |
Remedy: | CF adjustment motor1,2 1. Execute U240 Booklet - Bundle Up / Down to check the finisher operation. 2. Manipulate the fold moving belt up and down to check it is smoothly operable. 3. Check that the drive from the motor reaches the fold moving belt. (Check if the belt is bent.) 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF adjustment motor 1,2 and CF main PWB (YC10) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the CF adjustment motor1,2 CF adjustment sensor1,2 1. Execute U241 Booklet - bundle Up / Down HP to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF adjustment sensor 1,2 and CF main PWB (YC20) 4. Replace the CF adjustment sensor1,2. CF main PWB Replace the CF main PWB. |
Error code: | 8330 |
Description: | CF blade motor error When initial operation, CF blade sensor does not turn on within 1500 ms. |
Causes: | Defective connector cable or poor contact in the connector. Defective CF blade sensor. Defective CF blade motor. Defective CF main PWB. |
Remedy: | CF blade motor 1. Execute U240 Booklet - Blade to check the finisher operation. 2. Manipulate the fold blade up and down to check it is smoothly operable. 3. Check that the drive from the motor reaches the fold blade. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF blade motor and CF main PWB (YC15) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the CF blade motor. CF blade sensor 1. Execute U241 Booklet - Blade HP to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF blade sensor and CF main PWB (YC20) 4. Replace the CF blade sensor. CF main PWB Replace the CF main PWB |
Error code: | 8340 |
Description: | CF staple motor error 1 Staple JAM (center-folding unit) has been detected twice in a row. (The second JAM detection condition fullfilled with the home position did not detected in 600 ms after the motor was driven.) |
Causes: | Defective connector cable or poor contact in the connector. Defective CF staple sensor. Defective CF staple motor. Defective CF main PWB. |
Remedy: | CF staple motor 1. Execute U240 Booklet - Staple to check the finisher operation. 2. Manipulate the staple up and down check it is smoothly operable. 3. Check that the drive from the motor reaches the staple unit. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF staple unit and CF main PWB (YC13) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the CF staple motor. CF staple sensor Replace the CF staple unit. CF main PWB Replace the CF main PWB. |
Error code: | 8350 |
Description: | CF side registration motor 1 error When initial operation, CF side registration sensor 1 does not turn on within 1 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective CF side registration sensor 1. Defective CF side registration motor 1. Defective CF main PWB |
Remedy: | CF side registration motor 1 1. Execute U240 Booklet - Width Test to check the finisher operation. 2. Manipulate the side registration lower guide back and forth to check it can smoothly operable. 3. Check that the drive from the motor reaches the side registration lower guide. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF side registration motor 1 and CF main PWB (YC10) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the CF side registration motor 1. CF side registration sensor 1 1. Execute U241 Booklet - Width Down HP to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF side registration sensor 1 and CF main PWB (YC20) 4. Replace the CF side registration sensor 1. CF main PWB Replace the CF main PWB |
Error code: | 8360 |
Description: | CF main motor error During driving the motor, the lock signal is detected for 1 s continuously. |
Causes: | Defective connector cable or poor contact in the connector. Defective CF main motor. Defective CF main PWB. |
Remedy: | CF main motor 1. Execute U240 Booklet - Folding to check the finisher operation. 2. Manipulate the conveying roller to check it can smoothly rotate. 3. Check that the drive from the motor reaches the conveying roller. 4. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF main motor and CF main PWB (YC16) 5. If the wiring is disconnected, shorted or grounded, replace the wiring. 6. Replace the CF main motor. CF main PWB Replace the CF main PWB |
Error code: | 8440 |
Description: | Sensor adjusting problem (optional document finisher) The sensor cannot be adjusted within the specified range. |
Causes: | The paper entry sensor connector makes poor contact. Defective paper entry sensor. The optical path of the paper entry sensor is blocked by foreign matter. Defective finisher main PWB. |
Remedy: | The paper entry sensor connector makes poor contact. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective paper entry sensor. Replace the paper entry sensor and check for correct operation. The optical path of the paper entry sensor is blocked by foreign matter. Remove the foreign matter. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation. |
Error code: | 8460 |
Description: | EEPROM problem (document finisher) Reading from or writing to EEPROM cannot be performed. |
Causes: | Defective EEPROM or DF main PWB. |
Remedy: | Replace the DF main PWB and check for correct operation. |
Error code: | 8500 |
Description: | Mailbox communication error Communication failed to be established after the mailbox was hooked up. |
Causes: | Defective connector cable or poor contact in the connector. Defective PWB. |
Remedy: | MB main PWB 1. Turn the main power switch off and after 5 seconds, turn it on. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. MB main PWB (YC3) and DF main PWB (YC6) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the MB main PWB DF main PWB Replace the DF main PWB |
Error code: | 8510 |
Description: | MB conveying motor error 1 When initial operation, MB home position sensor does not turn on within 5 s. |
Causes: | Defective connector cable or poor contact in the connector. Defective MB home position sensor. Defective MB conveying motor. Defective MB main PWB. |
Remedy: | MB conveying motor 1. If the transfer roller won’t rotate smoothly, repair its mechanism. 2. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. MB conveying motor and MB main PWB (YC5) 3. If the wiring is disconnected, shorted or grounded, replace the wiring. 4. Replace the MB conveying motor. MB home position sensor 1. Execute U241 Mail Box - Motor HP to check the finisher switch. 2. Check that the sensor and its mounting bracket are correctly positioned. 3. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. MB home position sensor and MB main PWB (YC2) 4. Replace the MB home position sensor. MB main PWB Replace the MB main PWB |
Error code: | 8900 |
Description: | Document finisher backup error Read and write data does not match 3 times in succession. |
Causes: | Defective connector cable or poor contact in the connector. Improper installation EEPROM. Defective DF main PWB. |
Remedy: | DF main PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. DF main PWB (YC4) and Engine PWB (YC18) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Replace the DF main PWB |
Error code: | 8910 |
Description: | Backup memory data problem (optional 3000-sheet document finisher) Read and write data does not match 3 times in succession. |
Causes: | Poor contact in the connector terminals. Defective punch PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector on the punch PWB and the connector YC4 on the finisher main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective punch PWB. Replace the punch PWB and check for correct operation. |
Error code: | 8920 |
Description: | Backup memory data problem (optional mailbox of 3000-sheet document finisher) Read and write data does not match 3 times in succession. |
Causes: | Poor contact in the connector terminals. Defective mailbox main PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector on the mailbox main PWB and the connector YC7 on the finisher main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective mailbox main PWB. Replace the mailbox main PWB and check for correct operation. |
Error code: | 8930 |
Description: | Center-folding unit backup error Read and write data does not match 3 times in succession. |
Causes: | Defective connector cable or poor contact in the connector. Improper installation EEPROM. Defective CF main PWB. |
Remedy: | CF main PWB 1. Confirm that the wiring connector is firmly connected and, if necessary, connect the connector all the way in. CF main PWB (YC7) and DF main PWB (YC9) 2. If the wiring is disconnected, shorted or grounded, replace the wiring. 3. Install the EEPROM properly. 4. Replace the CF main PWB |
Error code: | 9530-9550 |
Description: | Contact the Service Administrative Division. |
Remedy: | Contact the Service Administrative Division. |
Error code: | F000 |
Description: | Communication error between the main unit and CPU |
Causes: | The panel cannot be detected since the CPU communication between the main PWB and the operation panel main PWB is unavailable. |
Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 3 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. 5 Replacing the operation panel main PWB The operation panel main PWB is faulty. Replace the panel main PWB. |
Error code: | F010 |
Description: | Program read error (SSD) |
Causes: | The garbled 2bit data was detected during the program read from the flash memory. |
Remedy: | 1 (When the service call error appears after replacing the SSD) Replacing the SSD along the correct procedures The firmware is not stored in the SSD. Insert the USB memory device containing all released firmware into the main unit, and turn the main power on. Firmware Update 2 Checking the SSD (if lit after replacing the SSD) An SSD out of specification is installed. Install the SSD matching the memory capacity specification. 3 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 4 Checking the SSD The SSD is not properly attached. Check if the SSD terminal is not faulty and clean it. Then, reinstall the SSD. 5 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 6 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 7 Replacing the SSD The SSD is faulty. Backup the data in the SSD at U026. Then, replace the SSD and turn the main power on while installing the USB memory storing the firmware for the affected model n the main unit. 8 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
Error code: | F020 |
Description: | System memory error (RAM reading/writing error or CPU memory error) |
Causes: | The error appears during the reading/writing check of the RAM for the CPU when the main unit starts up. |
Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 3 Checking the main PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the main PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the main PWB. |
Error code: | F030 |
Description: | Main PWB system error |
Causes: | Defective main PWB. |
Remedy: | Defective main PWB. Replace the main PWB and check for correct operation. |
Error code: | F040 |
Description: | Option installation error |
Causes: | The size of the attached main memory is 2 GB when the DSDF is installed. |
Remedy: | Main memory Replace the main memory with a 4 GB one. DSDF • Remove the DSDF. • Replace the DSDF with an RADF. |
Error code: | F226 |
Description: | VIDEO output error |
Causes: | Defective main PWB. |
Remedy: | Defective main PWB. Replace the main PWB and check for correct operation. |
Парткод
Название
Kyocera Блок фотобарабана
Kyocera Блок проявки голубой
Kyocera Блок проявки черный
Kyocera Блок проявки пурпурный
Kyocera Блок проявки желтый
Kyocera Узел термозакрепления 230v
Kyocera Сервисный комплект
Kyocera Сервисный комплект
Kyocera Тонер-картридж голубой
Kyocera Тонер-картридж черный
Kyocera Тонер-картридж пурпурный
Kyocera Тонер-картридж желтый