Kyocera KM-2050
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
30000
Скорость печати
A4
20
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Печать фотографий |
|
Телефон |
|
Сканер |
|
Факс |
|
Размещение |
настольный |
Тип устройства |
МФУ |
Копир |
|
Число страниц в месяц |
30 000 |
Область применения |
малый офис |
Макс. формат |
A3 |
Цветность печати |
|
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Принтер |
|
Время разогрева |
20 |
Двусторонняя печать |
|
Печать без полей |
|
Пигментные чернила |
|
Макс, разрешение для ч/б печати |
|
| По X | 1 200 |
Скорость ч/б печати |
|
| A4 | 20 |
| A3 | 10 |
Макс, разрешение для цветной печати |
|
| По Y | 2 400 |
Время выхода первого отпечатка |
|
| Ч/б | 5,5 |
Копир |
|
Макс, количество копий за цикл |
999 |
Время выхода первой копии |
5,9 |
Шаг масштабирования |
0,01 |
Значение масштаба |
|
| Максимальное | 2 |
| Минимальное | 0,25 |
Макс, разрешение (ч/б) |
|
| По X | 600 |
| По Y | 600 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Стандарт WIA |
|
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
15 000 |
Количество картриджей |
1 |
Ресурс фотобарабана |
150 000 |
Печать на: |
|
| Этикетках |
|
| Глянцевой бумаге |
|
| Матовой бумаге |
|
| Карточках |
|
| Пленках |
|
| Конвертах |
|
| CD/DVD |
|
| Фотобумаге |
|
| Рулоне |
|
Факс |
|
Цветной |
|
Телефон |
|
Caller ID |
|
Автоответчик |
|
Стандарт DECT |
|
АОН |
|
Проводная трубка |
|
Беспроводная трубка |
|
Спикерфон |
|
Языки управления |
|
| PCL 5e |
|
| PCL 6 |
|
| PostScript 2 |
|
| PostScript 3 |
|
| PostScript |
|
| PPDS |
|
|
|
|
| PCL 5c |
|
Лотки |
|
Подача бумаги |
|
| Стандартная | 650 |
Вывод бумаги |
|
| Стандартный | 250 |
Финишер |
|
Сортер |
|
Брошюровщик |
|
Степлер |
|
Сортировка со сдвигом |
|
Интерфейсы |
|
USB |
|
Ethernet (RJ-45) |
|
LPT |
|
Количество свободных слотов расширения |
1 |
RS-232 |
|
Устройство для чтения карт памяти |
|
FireWire (IEEE 1394) |
|
Инфракрасный порт |
|
Bluetooth |
|
Wi-Fi |
|
Версия USB |
2,0 |
Память/Процессор |
|
Частота процессора |
300 |
Объем памяти |
64 |
Макс, объем памяти |
320 |
Процессор |
Power PC 750 CX |
Дополнительная информация |
|
Поддержка ОС |
|
| Windows |
|
Потребляемая мощность |
|
| В режиме ожидания | 105 |
| При работе | 499 |
Уровень шума |
|
| При работе | 62 |
| В режиме ожидания | 40 |
Габариты |
|
Ширина |
574 |
Глубина |
607 |
Вес |
47 |
Высота |
593 |
Модули
OPERATION UNIT
EXTERIOR COVERS (KM-2050)
FRAMES
OPTION I (ORIGINAL HOLDER)
Exit Section
PAPER FEED SECTION (KM-2050)
CASSETTE
FRAME L
CASSETTE ASSEMBLY
ADF 1
Exterior Covers
PANEL
ELECTRICAL COMPONENTS
Imaging Unit
CONVEYING SECTION
PAPER FEED
PAPER FEED SECTION
(Комплекты)
SCANNER SECTION
BYPASS SECTION
DUPLEX
DRIVING and COOLING SECTION
FUSER UNIT
OPTION II and TOOL
Детали CASSETTE
| Деталь: | COVER OPERATION J |
| Парткод: | 2DA25010 |
| Деталь: | PCB OPERATION ASSY |
| Парткод: | 2DA01011 |
| Деталь: | KEY OPERATION 10 |
| Парткод: | 2DA25350 |
| Деталь: | KEY PRINT |
| Парткод: | 2DC25052 |
| Деталь: | KEY STOP |
| Парткод: | 2DC25060 |
| Деталь: | KEY RESET |
| Парткод: | 2DC25070 |
| Деталь: | KEY MANAGEMENT |
| Парткод: | 2DA25290 |
| Деталь: | KEY SAVER |
| Парткод: | 2DA25030 |
| Деталь: | KEY EXPOSURE |
| Парткод: | 2DA25220 |
| Деталь: | KEY DECISION |
| Парткод: | 2DA25050 |
| Деталь: | KEY SELECT |
| Парткод: | 2DA25270 |
| Деталь: | KEYZOOM |
| Парткод: | 2DA25280 |
| Деталь: | KEY FUNCTION |
| Парткод: | 2DA25040 |
| Деталь: | KEY FUNCTION B |
| Парткод: | 2DA25260 |
| Деталь: | KEY STATUS |
| Парткод: | 2DA25060 |
| Деталь: | KEY LANGUAGE |
| Парткод: | 2DA25250 |
| Деталь: | RIGHT DUST SHIELD |
| Парткод: | 2DA25110 |
| Деталь: | CENTER DUST SHIELD |
| Парткод: | 2DA25130 |
| Деталь: | LEFT DUST SHIELD |
| Парткод: | 2DA25120 |
| Деталь: | LEFT DUST SHIELD B |
| Парткод: | 2DA25340 |
| Деталь: | PCB LCD |
| Парткод: | 2DA28100 |
| Деталь: | PCB DUST SHIELD |
| Парткод: | 2DA25510 |
| Деталь: | SPACER OPE PCB B |
| Парткод: | 2DA25330 |
| Деталь: | SPACER OPE PCB |
| Парткод: | 2C925210 |
| Деталь: | STOPPER LCD |
| Парткод: | 2DA25300 |
| Деталь: | GROUND PLATE LCD |
| Парткод: | 2DA25320 |
| Деталь: | MOUNT OPERATION R |
| Парткод: | 2C925201 |
| Деталь: | CENTER OPE SHEET E |
| Парткод: | 2DA25380 |
| Деталь: | CENTER OPE SHEET G |
| Парткод: | 2DA25390 |
| Деталь: | CENTER OPE SHEET F |
| Парткод: | 2DA25400 |
| Деталь: | CENTER OPE SHEET I |
| Парткод: | 2DA25410 |
| Деталь: | CENTER OPE SHEET S |
| Парткод: | 2DA25420 |
| Деталь: | CENTER OPE COVER |
| Парткод: | 2DA25020 |
| Деталь: | LID FAX KEY |
| Парткод: | 2DA25230 |
| Деталь: | LEFT OPE SHEET E |
| Парткод: | 2DA25440 |
| Деталь: | LEFT OPE SHEET |
| Парткод: | 2DA25450 |
| Деталь: | SHEET SAVER E |
| Парткод: | 2DA25490 |
| Деталь: | SHEET KEYBOARD E |
| Парткод: | 2DA25470 |
| Деталь: | WIRE PANEL |
| Парткод: | 2DA27520 |
| Деталь: | RETAINER OPERATION |
| Парткод: | 2C925180 |
| Деталь: | CORE 10-20X10 |
| Парткод: | 2A627940 |
| Деталь: | CORE SFT-72SNB-026K |
| Парткод: | 2C927230 |
| Деталь: | FG PLATE A |
| Парткод: | 2DA25520 |
| Деталь: | FG PLATE B |
| Парткод: | 2DA25530 |
| Деталь: | SHEET SET |
| Парткод: | 2DA25500 |
| Деталь: | REINFORCEMENT FEED ASSY |
| Парткод: | 3HW00010 |
| Деталь: | MAIN PCB ASSY |
| Парткод: | 3HW01010 |
| Деталь: | HEATER BRANCH PCB ASSY |
| Парткод: | 3HW01020 |
| Деталь: | JUNCTION PLATE MFP |
| Парткод: | 3HW02050 |
| Деталь: | UPPER REAR COVER |
| Парткод: | 3HW02040 |
| Деталь: | GROUND PLATE CASSETTE |
| Парткод: | 3HW02090 |
| Деталь: | GROUND PLATE PF |
| Парткод: | 3HW02110 |
| Деталь: | GROUND PLATE PF2 |
| Парткод: | 3HW02120 |
| Деталь: | GROUND PLATE PF3 |
| Парткод: | 3HW02130 |
| Деталь: | BASE LEG |
| Парткод: | 3HW02140 |
| Деталь: | HOOK COVER |
| Парткод: | 3HW02150 |
| Деталь: | COVER PAPER FEED |
| Парткод: | 3HW04010 |
| Деталь: | Left front cover |
| Парткод: | 3HW04020 |
| Деталь: | Left rear cover |
| Парткод: | 3HW04030 |
| Деталь: | REAR COVER |
| Парткод: | 3HW04040 |
| Деталь: | GUIDE CONVEYING |
| Парткод: | 3HW06040 |
| Деталь: | SPRING FEED |
| Парткод: | 3HW06060 |
| Деталь: | SUPPORT PLATE PCB |
| Парткод: | 3HW26010 |
| Деталь: | CONN CORD ASSY UPPER IF |
| Парткод: | 3HW27040 |
| Деталь: | CONN CORD ASSY LOWER IF |
| Парткод: | 3HW27050 |
| Деталь: | CONN CORD ASSY PCB-INTERF |
| Парткод: | 3HW27060 |
| Деталь: | RING STOPPER |
| Парткод: | 2A806250 |
| Деталь: | SHAFT FEED PULLEY |
| Парткод: | 2BL06211 |
| Деталь: | PULLEY FEED |
| Парткод: | 2BL16080 |
| Деталь: | PLATE SIZE DETECTION |
| Парткод: | 2C907060 |
| Деталь: | STOPPER CASSETTE |
| Парткод: | 2C907100 |
| Деталь: | LEVER PICK UP |
| Парткод: | 2C907270 |
| Деталь: | SPRING LEVER |
| Парткод: | 2C907350 |
| Деталь: | COUPLER,RELEASE |
| Парткод: | 3A504020 |
| Деталь: | PUSH SWITCH 03 SN |
| Парткод: | SP000360 |
| Деталь: | PIN COVER |
| Парткод: | 2BL04410 |
| Деталь: | CONT SENSOR ASSY |
| Парткод: | 2C901180 |
| Деталь: | FILM BASE L |
| Парткод: | 2C902230 |
| Деталь: | WIRE UPPER LEFT |
| Парткод: | 2C927790 |
| Деталь: | SHIELD UPPER LEFT B |
| Парткод: | 2C926150 |
| Деталь: | BASE RUBBER |
| Парткод: | 2C902070 |
| Деталь: | SPRING DEV PUSH |
| Парткод: | 2C902080 |
| Деталь: | SPRING DEV PUSH F |
| Парткод: | 2C902590 |
| Деталь: | MOUNT REAR COVER |
| Парткод: | 2C902100 |
| Деталь: | MOUNT FRONT COVER |
| Парткод: | 2C902110 |
| Деталь: | PANEL FRONT |
| Парткод: | 2C902120 |
| Деталь: | MOUNT CONT PCB |
| Парткод: | 2C902130 |
| Деталь: | MOUNT CONT LEVER |
| Парткод: | 2C902151 |
| Деталь: | RAIL DLP |
| Парткод: | 2C902160 |
| Деталь: | LEVER DEV PUSH |
| Парткод: | 2C902170 |
| Деталь: | FILM BASE |
| Парткод: | 2C902180 |
| Деталь: | HOLDER PULLEY |
| Парткод: | 2C902280 |
| Деталь: | RAIL CLEANING |
| Парткод: | 2C902200 |
| Деталь: | FILM BASE B |
| Парткод: | 2C902240 |
| Деталь: | GROUND PLATE FRAME |
| Парткод: | 2C902260 |
| Деталь: | COLLAR LEVER CONT. |
| Парткод: | 2C902520 |
| Деталь: | LEVER LOCK CONT. |
| Парткод: | 2C902540 |
| Деталь: | GUIDE A CONT. |
| Парткод: | 2C902510 |
| Деталь: | GUIDE B CONT. |
| Парткод: | 2C902560 |
| Деталь: | SPACER BASE |
| Парткод: | 2C902270 |
| Деталь: | LABEL CONT SET |
| Парткод: | 2C905071 |
| Деталь: | LABEL DRUM CAUTION |
| Парткод: | 2C905110 |
| Деталь: | SHEET OPERATION PCB |
| Парткод: | 2DA25360 |
| Деталь: | BASE TERMINAL TRANSFER |
| Парткод: | 2C926010 |
| Деталь: | BASE TERMINAL MAIN |
| Парткод: | 2C926020 |
| Деталь: | TERMINAL DLP |
| Парткод: | 2C926030 |
| Деталь: | TERMINAL TRANSFER |
| Парткод: | 2C926040 |
| Деталь: | TERMINAL SEPARATION |
| Парткод: | 2C926050 |
| Деталь: | TERMINAL MAIN |
| Парткод: | 2C926060 |
| Деталь: | GROUND PLATE CONVEYING |
| Парткод: | 2C926080 |
| Деталь: | TERMINAL FUSER |
| Парткод: | 2C926100 |
| Деталь: | GROUND PLATE EXIT |
| Парткод: | 2C926111 |
| Деталь: | GROUND PLATE FUSER |
| Парткод: | 2C926120 |
| Деталь: | SHIELD UPPER LEFT |
| Парткод: | 2C926140 |
| Деталь: | SWITCH CONTAINER |
| Парткод: | 2C927140 |
| Деталь: | PULLEY,DRUM SEPARATION |
| Парткод: | 2A118370 |
| Цена: | 90 ₽ |
| Деталь: | SET, PLATEN COVER TYPE D (OPTION) |
| Парткод: | 2CX82010 |
| Деталь: | COVER,PLATEN |
| Парткод: | 2A612800 |
| Деталь: | MAT,ORIGINAL HOLDER |
| Парткод: | 2A612810 |
| Деталь: | HINGE,ORIGINAL HOLDER |
| Парткод: | 2A612820 |
| Деталь: | ORIGINAL POCKET |
| Парткод: | 60904280 |
| Деталь: | BINDING TAP-TITE P SCREW M4X16 |
| Парткод: | B8014160 |
| Деталь: | STOPPER RELEASE SWITCH |
| Парткод: | 2C912630 |
| Деталь: | BIND T.T SCREW(+) / M4 X 10 CRFREE P-T |
| Парткод: | B1A64100 |
| Деталь: | PCB EJECT SW ASSY |
| Парткод: | 2C901060 |
| Деталь: | LEFT COVER |
| Парткод: | 2C904050 |
| Деталь: | STOPPER LEFT COVER F |
| Парткод: | 2C904210 |
| Деталь: | STOPPER LEFT COVER R |
| Парткод: | 2C904220 |
| Деталь: | STRAP LEFT COVER A |
| Парткод: | 2C904231 |
| Деталь: | STRAP LEFT COVER B |
| Парткод: | 2C904241 |
| Деталь: | SHAFT HOOK |
| Парткод: | 2C904250 |
| Деталь: | HOOK LEFT COVER F |
| Парткод: | 2C904260 |
| Деталь: | HOOK LEFT COVER R |
| Парткод: | 2C904270 |
| Деталь: | JUNCTION PLATE HOOK |
| Парткод: | 2C904280 |
| Деталь: | SPRING LEFT HOOK |
| Парткод: | 2C904350 |
| Деталь: | PLATE LEFT SW |
| Парткод: | 2C904390 |
| Деталь: | CUT WASHER 5 |
| Парткод: | 2C904550 |
| Деталь: | PLATE LEFT HOOK |
| Парткод: | 2C904430 |
| Деталь: | LABEL HIGH TEMP |
| Парткод: | 2C905090 |
| Деталь: | SHOULDER SCREW EXIT |
| Парткод: | 2C921400 |
| Деталь: | ROLLER EXIT INNER |
| Парткод: | 2C921010 |
| Деталь: | ROLLER FEED SHIFT |
| Парткод: | 2C921020 |
| Деталь: | PULLEY FEED SHIFT |
| Парткод: | 2C921040 |
| Деталь: | GUIDE SHIFT |
| Парткод: | 2C921050 |
| Деталь: | GUIDE SEPARATE |
| Парткод: | 2C921061 |
| Деталь: | HOUSING EXIT UPPER |
| Парткод: | 2C921071 |
| Деталь: | HOUSING EXIT LOWER |
| Парткод: | 2C921080 |
| Деталь: | GUIDE EXIT LOWER |
| Парткод: | 2C921091 |
| Деталь: | ACTUATOR EXIT INNER |
| Парткод: | 2C921100 |
| Деталь: | ACTUATOR EXIT LEFT |
| Парткод: | 2C921110 |
| Деталь: | GEAR 23 EXIT |
| Парткод: | 2C921120 |
| Деталь: | ARM SHIFT |
| Парткод: | 2C921150 |
| Деталь: | ARM SEPARATE |
| Парткод: | 2C921160 |
| Деталь: | ARM LINK |
| Парткод: | 2C921180 |
| Деталь: | SPRING PULLEY INNER |
| Парткод: | 2C921190 |
| Деталь: | SPRING PULLEY FEED SHIFT |
| Парткод: | 2C921200 |
| Деталь: | SPRING GUIDE DU |
| Парткод: | 2C921221 |
| Деталь: | GUIDE DU |
| Парткод: | 2C921231 |
| Деталь: | ARM SHIFT B |
| Парткод: | 2C921240 |
| Деталь: | PLATE EXIT HOLDER |
| Парткод: | 2C921390 |
| Деталь: | PLATE EARTH EXIT 2 |
| Парткод: | 2C921260 |
| Деталь: | ARM SEPARATE B |
| Парткод: | 2C921270 |
| Деталь: | SPRING SEPARATE |
| Парткод: | 2C921280 |
| Деталь: | SPRING LINK |
| Парткод: | 2C921290 |
| Деталь: | BRACKET EXIT |
| Парткод: | 2C921301 |
| Деталь: | PLATE EARTH EXIT B |
| Парткод: | 2C921310 |
| Деталь: | SPRING ACTUATOR INNER |
| Парткод: | 2C921330 |
| Деталь: | BELT EXIT |
| Парткод: | 2C921340 |
| Деталь: | PULLEY EXIT |
| Парткод: | 2C921350 |
| Деталь: | PULLEY EJECT |
| Парткод: | 2C921360 |
| Деталь: | STOPPER SE |
| Парткод: | 2C921370 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | SPRING ACTUATOR L |
| Парткод: | 2BL21260 |
| Деталь: | STOPPER 3 |
| Парткод: | 2BT11070 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | STATIC ELIMINATOR B,EJECT |
| Парткод: | 34821210 |
| Деталь: | WIRE EJECT |
| Парткод: | 2C927530 |
| Деталь: | SPRING LEFT COVER |
| Парткод: | 2C904440 |
| Деталь: | PIN LEFT COVER |
| Парткод: | 2C904500 |
| Деталь: | COVER FRONT STRAP |
| Парткод: | 2C904460 |
| Деталь: | LABEL BYPASS TABLE |
| Парткод: | 2C905170 |
| Деталь: | SPRING PULLEY EJECT |
| Парткод: | 2C921380 |
| Деталь: | LABEL BYPASS JAM |
| Парткод: | 2C905270 |
| Деталь: | LEFT RAIL CASSETTE |
| Парткод: | 3HW02020 |
| Деталь: | MOUNT SW |
| Парткод: | 3HW02080 |
| Деталь: | Roller feed |
| Парткод: | 3HW06020 |
| Деталь: | SHAFT PAPER FEED |
| Парткод: | 3HW06030 |
| Деталь: | HOLDER FEED SHAFT |
| Парткод: | 3HW06050 |
| Деталь: | GUIDE SHEET PAPER FEED |
| Парткод: | 3HW06070 |
| Деталь: | GEAR 26/90 |
| Парткод: | 3HW22010 |
| Деталь: | GEAR 25 |
| Парткод: | 3HW22020 |
| Деталь: | MOUNT MOTOR |
| Парткод: | 3HW22030 |
| Деталь: | MOUNT DRIVE |
| Парткод: | 3HW22040 |
| Деталь: | MOTOR PAPER FEED |
| Парткод: | 3HW27010 |
| Деталь: | CLUTCH PAPER FEED |
| Парткод: | 3HW27020 |
| Деталь: | CONN CORD ASSY SIZE SW |
| Парткод: | 3HW27070 |
| Деталь: | CONN CORD ASSY PE SENSOR |
| Парткод: | 3HW27080 |
| Деталь: | CONN CORD ASSY FEED SW |
| Парткод: | 3HW27090 |
| Деталь: | PULLEY,PAPER FEED |
| Парткод: | 2AR07220 |
| Цена: | 1 600 ₽ |
| Деталь: | PULLEY,SEPARATION |
| Парткод: | 2AR07230 |
| Цена: | 360 ₽ |
| Деталь: | PULLEY,LEADING FEED |
| Парткод: | 2AR07240 |
| Деталь: | BUSH FEED |
| Парткод: | 2A806030 |
| Деталь: | RING STOPPER |
| Парткод: | 2A806250 |
| Деталь: | ACTUATOR EMPTY |
| Парткод: | 2C907120 |
| Деталь: | ACTUATOR REGIST |
| Парткод: | 2C907170 |
| Деталь: | SHAFT PICK UP B |
| Парткод: | 2C907230 |
| Деталь: | PLATE PICK UP B |
| Парткод: | 2C907240 |
| Деталь: | HOLDER RETARD |
| Парткод: | 2C907250 |
| Деталь: | SLIDER RAIL |
| Парткод: | 2C907260 |
| Деталь: | TORQUE LIMITER 340 |
| Парткод: | 2C907280 |
| Деталь: | SHAFT RETARD |
| Парткод: | 2C907300 |
| Деталь: | SPRING REGIST |
| Парткод: | 2C907310 |
| Деталь: | SPRING RETARD |
| Парткод: | 2C907320 |
| Деталь: | SPRING PICK UP |
| Парткод: | 2C907340 |
| Деталь: | HOLDER PULLEY A |
| Парткод: | 2C907400 |
| Деталь: | PULLEY GUIDE A |
| Парткод: | 2C907410 |
| Деталь: | BUSH PAPER FEED C |
| Парткод: | 2C907430 |
| Цена: | 190 ₽ |
| Деталь: | HOLDER SENSOR |
| Парткод: | 2C907480 |
| Деталь: | GEAR 16,BYPASS |
| Парткод: | 29807100 |
| Деталь: | SWITCH CONTAINER |
| Парткод: | 2C927140 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | GEAR 20 PF FEED |
| Парткод: | 3HL07250 |
| Деталь: | EDGING,EDS-0607U(KITAGAWA) |
| Парткод: | M2104260 |
| Деталь: | WIRE SADDLE,LWS-1S |
| Парткод: | M2109180 |
| Деталь: | STOPPER 5,RING |
| Парткод: | 2BC06990 |
| Деталь: | BINDING BAND SG-130 |
| Парткод: | M2107120 |
| Деталь: | PARTS,CT-410,SP |
| Парткод: | 2C993010 |
| Деталь: | LEVER,CASSETTE BASE RELEASE |
| Парткод: | 19507050 |
| Деталь: | CASSETTE |
| Парткод: | 2C907010 |
| Деталь: | BOTTOM CASSETTE |
| Парткод: | 2C907020 |
| Деталь: | REAR CURSOR C |
| Парткод: | 2C907030 |
| Деталь: | FRONT CURSOR C |
| Парткод: | 2C907040 |
| Деталь: | PLATE SIDE SW |
| Парткод: | 2C907050 |
| Деталь: | LEVER INDICATOR |
| Парткод: | 2C907070 |
| Деталь: | SPRING SIDE SW |
| Парткод: | 2C907090 |
| Деталь: | MARKER INDICATOR |
| Парткод: | 2C907110 |
| Деталь: | PAD CASSETTE |
| Парткод: | 2C907140 |
| Деталь: | SPRING BOTTOM |
| Парткод: | 2C907150 |
| Деталь: | RIGHT CURSOR A |
| Парткод: | 2C907190 |
| Деталь: | STOPPER ARM |
| Парткод: | 2C907200 |
| Деталь: | SPRING CURSOR R |
| Парткод: | 2C907360 |
| Деталь: | MARKER CASSETTE |
| Парткод: | 2C907370 |
| Деталь: | TURN PLATE CASSETTE |
| Парткод: | 2C907380 |
| Деталь: | LEVER CURSOR C |
| Парткод: | 2C907390 |
| Деталь: | STOPPER INDICATOR |
| Парткод: | 2C907490 |
| Деталь: | GROUND PLATE BOTTOM |
| Парткод: | 2C907500 |
| Деталь: | LID CASSETTE A |
| Парткод: | 2C907550 |
| Деталь: | LID CASSETTE B |
| Парткод: | 2C907560 |
| Деталь: | LID CASSETTE C |
| Парткод: | 2C907570 |
| Деталь: | GEAR 18,CASSETTE |
| Парткод: | 34907141 |
| Деталь: | HOLDER RIGHT CURSOR |
| Парткод: | 2C907590 |
| Деталь: | PIN CURSOR C |
| Парткод: | 2C907600 |
| Деталь: | RING STOPPER |
| Парткод: | 2A806250 |
| Деталь: | SPRING LEVER F |
| Парткод: | 2C907620 |
| Деталь: | SPRING BELT GUIDE ROLLER |
| Парткод: | 76508130 |
| Деталь: | LABEL CASSETTE LGR |
| Парткод: | 2C905200 |
| Деталь: | SHEET CASSETTE SIZE(C) |
| Парткод: | 2C905230 |
| Деталь: | SHEET CASSETTE SIZE(I) |
| Парткод: | 2C905240 |
| Деталь: | Шестерня тефлонового вала |
| Парткод: | 302KK25170 |
| Цена: | 650 ₽ |
| Деталь: | Тефлоновый вал |
| Парткод: | 302KK94240 |
| Цена: | 5 600 ₽ |
| Деталь: | CORD HOOK, MFC9460CDN/ MFC9465CDN/ MFC9560CDW/ MFC9970CDW |
| Парткод: | FK-410 |
| Цена: | 23 700 ₽ |
| Деталь: | Пружина и палец отделения бумаги от тефлонового вала |
| Парткод: | CET7824 |
| Деталь: | Палец отделения бумаги от тефлонового вала |
| Парткод: | 302LH25610 |
| Деталь: | Ролик подачи бумаги |
| Парткод: | 2BJ06010 |
| Цена: | 250 ₽ |
| Деталь: | Основание площадки отделения бумаги в узле автоматической подачи документов |
| Парткод: | 303HL07093 |
| Цена: | 150 ₽ |
| Деталь: | Ролик подачи бумаги в узле автоматической подачи документов |
| Парткод: | 3BR07040 |
| Цена: | 420 ₽ |
| Деталь: | Накладка площадки отделения бумаги в узле автоматической подачи документов |
| Парткод: | 3HL07100 |
| Цена: | 2 400 ₽ |
| Деталь: | HINGE FRONT COVER |
| Парткод: | 2C902140 |
| Деталь: | FRONT RIGHT COVER (KM-2050) |
| Парткод: | 2DA04010 |
| Деталь: | FRONT RIGHT COVER (KM-1650) |
| Парткод: | 2DB04010 |
| Деталь: | FRONT LEFT COVER(K) |
| Парткод: | 2C904470 |
| Деталь: | TRAY EXIT (1/2) |
| Парткод: | 2C904031 |
| Деталь: | RIGHT COVER |
| Парткод: | 2C904041 |
| Деталь: | LEFT LOW COVER |
| Парткод: | 2C904060 |
| Деталь: | UPPER FRONT COVER |
| Парткод: | 2C904070 |
| Деталь: | FRONT SIDE COVER UP |
| Парткод: | 2C904080 |
| Деталь: | FRONT TOP COVER |
| Парткод: | 2C904090 |
| Деталь: | RIGHT TOP COVER |
| Парткод: | 2C904100 |
| Деталь: | LEFT TOP COVER |
| Парткод: | 2C904110 |
| Деталь: | REAR TOP COVER |
| Парткод: | 2C904120 |
| Деталь: | FRONT SIDE COVER MID |
| Парткод: | 2C904130 |
| Деталь: | FRONT SIDE COVER LOW |
| Парткод: | 2C904140 |
| Деталь: | Inner rear cover |
| Парткод: | 2C904150 |
| Деталь: | INNER LEFT COVER |
| Парткод: | 2C904160 |
| Деталь: | REAR COVER |
| Парткод: | 2DA04040 |
| Деталь: | Left front cover |
| Парткод: | 2C904180 |
| Деталь: | Left rear cover |
| Парткод: | 2C904190 |
| Деталь: | LEFT MIDDLE COVER |
| Парткод: | 2C904200 |
| Деталь: | PLATE FRONT COVER |
| Парткод: | 2C904290 |
| Деталь: | INNER FRONT COVER |
| Парткод: | 2C904372 |
| Деталь: | COVER DSUB |
| Парткод: | 2C904410 |
| Деталь: | LABEL CONVEYING JAM |
| Парткод: | 2C905080 |
| Деталь: | LABEL RADIATION |
| Парткод: | 2C905100 |
| Деталь: | LID KMAS |
| Парткод: | 2C912430 |
| Деталь: | SHIELD RIGHT COVER |
| Парткод: | 2C926130 |
| Деталь: | MAGNET CATCH |
| Парткод: | 60804120 |
| Деталь: | LABEL SEP CLEANING |
| Парткод: | 2BL05070 |
| Деталь: | BRUSH CLEANER |
| Парткод: | 2BL16220 |
| Деталь: | TANK DISPOSAL |
| Парткод: | 2C918150 |
| Деталь: | CAP TANK DISPOSAL |
| Парткод: | 2C918170 |
| Деталь: | LABEL,TONER DISPOSAL TANK HK |
| Парткод: | 2AV73580 |
| Деталь: | LID MAIN SW |
| Парткод: | 2DA04020 |
| Деталь: | FILM FRONT COVER |
| Парткод: | 2C904480 |
| Деталь: | LABEL LEFT COVER |
| Парткод: | 2C905220 |
| Деталь: | SPONGE COVER |
| Парткод: | 2C904510 |
| Деталь: | COVER SHIELD |
| Парткод: | 2DA04030 |
| Деталь: | SHIELD GASKET |
| Парткод: | ZG000470 |
| Деталь: | SHIELD GASKET |
| Парткод: | ZG000490 |
| Деталь: | LID FINISHER |
| Парткод: | 2DA04090 |
| Деталь: | LID REAR COVER |
| Парткод: | 2DA04100 |
| Деталь: | Блок лазера |
| Парткод: | 302C993092 |
| Деталь: | PARTS,LSU ASSY.SP |
| Парткод: | 2C993090 |
| Деталь: | DISPOSAL SENSOR ASSY |
| Парткод: | 2C901170 |
| Деталь: | HOLDER SENSORB |
| Парткод: | 2C918400 |
| Деталь: | ARM INTERLOCK SW |
| Парткод: | 2C904300 |
| Деталь: | MOUNT INTERLOCK SW |
| Парткод: | 2C904310 |
| Деталь: | SPRING LEFT INTERLOCK |
| Парткод: | 2C904340 |
| Деталь: | PIN CONVEYING HOOK |
| Парткод: | 2C916150 |
| Деталь: | DETECTION PLATE |
| Парткод: | 2C918350 |
| Деталь: | SPRING DETECTION |
| Парткод: | 2C918360 |
| Деталь: | HOLDER INTERLOCK SW |
| Парткод: | 2C926070 |
| Деталь: | SHIELD MAIN |
| Парткод: | 2DA26500 |
| Деталь: | MOUNT POWER SOURCE |
| Парткод: | 2C926510 |
| Деталь: | FAN COOLING 50-10 |
| Парткод: | 2DA27020 |
| Деталь: | SWITCH INTERLOCK L |
| Парткод: | 2C927170 |
| Деталь: | SWITCH INTERLOCK F |
| Парткод: | 2C927180 |
| Деталь: | WIRE ENGINE |
| Парткод: | 2C927510 |
| Деталь: | WIRE SADLE,YMC-10-0 |
| Парткод: | M2109330 |
| Деталь: | WIRE FUSER |
| Парткод: | 2C927600 |
| Деталь: | WIRE DESK POWER |
| Парткод: | 2C927610 |
| Деталь: | WIRE PD |
| Парткод: | 2C927710 |
| Деталь: | WIRE DESK |
| Парткод: | 2C927660 |
| Деталь: | WIRE FRONT SW |
| Парткод: | 2C927680 |
| Деталь: | FFC HVU |
| Парткод: | 2C927740 |
| Деталь: | PARTS,PCB ENGINE ASSY.SP (KM-2050) |
| Парткод: | 2DA93020 |
| Деталь: | PARTS,PCB ENGINE ASSY.SP (KM-1650) |
| Парткод: | 2DB93010 |
| Деталь: | PARTS.PCB MAIN ASSY.SP |
| Парткод: | 2DA93030 |
| Деталь: | CORE SFT-72SNB-026K |
| Парткод: | 2C927230 |
| Деталь: | CORE 10-20X10 |
| Парткод: | 2A627940 |
| Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
| Парткод: | M2105740 |
| Деталь: | SPACER,KGPS-4S |
| Парткод: | M2108130 |
| Деталь: | WIRE SADDLE,WS-1 NS |
| Парткод: | M2109000 |
| Деталь: | WIRE SADDLE,WS-2WS |
| Парткод: | M2109020 |
| Деталь: | CLAMP,EMT-5N(TAKEUCHI) |
| Парткод: | M7005030 |
| Деталь: | CLAMP,FCC-125EM513(TAKEUCHI) |
| Парткод: | M70A5020 |
| Деталь: | PCB HIGH VOLTAGE |
| Парткод: | 2C928051 |
| Деталь: | SEAL WIRE |
| Парткод: | 2BL14480 |
| Деталь: | SHIELD CCD WIRE |
| Парткод: | 2C926160 |
| Деталь: | RAIL SHIELD |
| Парткод: | 2DA26510 |
| Деталь: | GUIDE CF |
| Парткод: | 2DA26520 |
| Деталь: | SPACER,KGPS-3.5S(KITAGAWA) |
| Парткод: | M2108800 |
| Деталь: | PCB PRINTER ASSY |
| Парткод: | 2DA01070 |
| Деталь: | FFC MAIN |
| Парткод: | 2DA27560 |
| Деталь: | LID MODULAR |
| Парткод: | 2BJ26120 |
| Деталь: | LABEL INTERFACE |
| Парткод: | 2DA26550 |
| Деталь: | CORE 15-26X13 |
| Парткод: | 2AV27440 |
| Деталь: | LID NETWORK |
| Парткод: | 2DA26540 |
| Деталь: | PLATE OPTION |
| Парткод: | 2DD26070 |
| Деталь: | PIN,OPTION |
| Парткод: | 3BH26030 |
| Деталь: | FERRITE CORE |
| Парткод: | YB000510 |
| Деталь: | SHIELD GASKET |
| Парткод: | ZG000470 |
| Деталь: | SHIELD GASKET |
| Парткод: | ZG000480 |
| Деталь: | SHIELD GASKET |
| Парткод: | ZG000500 |
| Деталь: | PCB LVU 100 |
| Парткод: | 2DA28070 |
| Деталь: | PCB LVU 200 |
| Парткод: | 2DA28080 |
| Деталь: | FUSE,CES6-N1(SOC) |
| Парткод: | M5561000 |
| Деталь: | FUSE,215008(LITTEL-FUSE) |
| Парткод: | M1658030 |
| Деталь: | FUSE,19181-T6.3H(WICKMANN) |
| Парткод: | M6056000 |
| Деталь: | POWER CORD(120) |
| Парткод: | 2DA27050 |
| Деталь: | POWER CORD(230) |
| Парткод: | 2DA27060 |
| Деталь: | POWER CODE AS(240) |
| Парткод: | 29927231 |
| Деталь: | CORE 11-25X14 |
| Парткод: | 2A627930 |
| Деталь: | GASKET SHIELD 8X10X45 |
| Парткод: | 2C927250 |
| Деталь: | PARTS,DV-410,SP |
| Парткод: | 2C993030 |
| Деталь: | BUSH GEAR Z26H49515M0001A4 |
| Парткод: | 2BZ22230 |
| Деталь: | REAR COVER DLP |
| Парткод: | 2C914080 |
| Деталь: | GEAR Z20H B |
| Парткод: | 2C914280 |
| Деталь: | SET MK-410 (OPTION) |
| Парткод: | 2C982010 |
| Деталь: | SPRING.CLAW SEPARATION |
| Парткод: | 2AR18280 |
| Цена: | 130 ₽ |
| Деталь: | PULLEY,DRUM SEPARATION |
| Парткод: | 2A118370 |
| Цена: | 90 ₽ |
| Деталь: | BLADE CLEANING |
| Парткод: | 2C918010 |
| Деталь: | LOWER SEAL CLEANING |
| Парткод: | 2C918040 |
| Цена: | 550 ₽ |
| Деталь: | FRONT COVER CLEANING |
| Парткод: | 2C918050 |
| Цена: | 140 ₽ |
| Деталь: | HOLDER CLAW |
| Парткод: | 2C918340 |
| Цена: | 70 ₽ |
| Деталь: | CLAW SEPARATION |
| Парткод: | 2C918370 |
| Деталь: | PARTS,MC-410,SP |
| Парткод: | 2C993020 |
| Деталь: | SPRING WIRE |
| Парткод: | 2BZ02300 |
| Деталь: | CORONA WIRE MCH |
| Парткод: | 2CK10060 |
| Деталь: | GRID |
| Парткод: | 2C910040 |
| Цена: | 460 ₽ |
| Деталь: | PIN CHARGER |
| Парткод: | 33910230 |
| Деталь: | ROLLER REGIST LEFT |
| Парткод: | 2C916020 |
| Деталь: | BASE CONVEYING |
| Парткод: | 2C916031 |
| Деталь: | FILM REGIST GUIDE |
| Парткод: | 2C916040 |
| Деталь: | LEVER CONVEYING FRONT |
| Парткод: | 2C916060 |
| Деталь: | LEVER CONVEYING REAR |
| Парткод: | 2C916070 |
| Деталь: | STOPPER BUSH REG |
| Парткод: | 2C916080 |
| Деталь: | GUIDE CONVEYING |
| Парткод: | 2C916090 |
| Деталь: | SPRING REGIST F |
| Парткод: | 2C916100 |
| Деталь: | SPRING CONVEYING BASE |
| Парткод: | 2C916120 |
| Деталь: | GROUND PLATE REG |
| Парткод: | 2C916130 |
| Деталь: | GROUND PLATE CONVEYING |
| Парткод: | 2C916140 |
| Деталь: | SHAFT CONVEYING |
| Парткод: | 2C916160 |
| Деталь: | GUIDE FEED A |
| Парткод: | 2C916170 |
| Деталь: | GEAR Z15 REGIST |
| Парткод: | 2C916180 |
| Деталь: | SPRING REGIST R |
| Парткод: | 2C916190 |
| Деталь: | LEVER TRANS GUIDE |
| Парткод: | 2C916200 |
| Деталь: | REINFORCEMENT CONVEYING |
| Парткод: | 2C916220 |
| Деталь: | SHAFT CONVEYING LEVER |
| Парткод: | 2C916230 |
| Деталь: | FILM REGIST GUIDE R |
| Парткод: | 2C916240 |
| Деталь: | COLLAR REGIST |
| Парткод: | 2C916250 |
| Деталь: | ROLLER TRANSFER |
| Парткод: | 2C917010 |
| Деталь: | GEAR TRANSFER |
| Парткод: | 2C917020 |
| Деталь: | GUIDE LEFT TRANS FRONT |
| Парткод: | 2C917030 |
| Деталь: | TERMINAL PLATE TRANS |
| Парткод: | 2C917040 |
| Деталь: | REINFORCEMENT TRANS GUIDE |
| Парткод: | 2C917050 |
| Деталь: | SPRING TRANS F |
| Парткод: | 2C917060 |
| Деталь: | HOUSING STA ELIMINATION |
| Парткод: | 2C917070 |
| Деталь: | PLATE STA ELIMINATION |
| Парткод: | 2C917080 |
| Деталь: | TERMINAL STA ELIMINATION |
| Парткод: | 2C917090 |
| Деталь: | BUSH TRANSFER |
| Парткод: | 2C917100 |
| Деталь: | COLLAR TRANS |
| Парткод: | 2C917110 |
| Деталь: | SPRING TRANS R |
| Парткод: | 2C917120 |
| Деталь: | SPRING GUIDE TRANS |
| Парткод: | 2C917150 |
| Деталь: | BUSH TRANS GUIDE F |
| Парткод: | 2C917160 |
| Деталь: | BUSH TRANS GUIDE R |
| Парткод: | 2C917170 |
| Деталь: | BUSH TRANS ROLL F |
| Парткод: | 2C917180 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | BUSH REGIST |
| Парткод: | 2C916260 |
| Деталь: | COLLAR TRANS ROLLER |
| Парткод: | 2BL17030 |
| Деталь: | SPACER REG F |
| Парткод: | 2C916270 |
| Деталь: | SPACER REG T0.5 |
| Парткод: | 2C916280 |
| Деталь: | FILM CONV BASE |
| Парткод: | 2C916290 |
| Деталь: | SPACER TRANS ROLL |
| Парткод: | 2C917200 |
| Деталь: | SPACER GUIDE LEFT TRANS |
| Парткод: | 2C917210 |
| Деталь: | Вал переноса заряда |
| Парткод: | 302C917301 |
| Цена: | 4 700 ₽ |
| Деталь: | Лезвие очистки фотовала |
| Парткод: | 302C918011 |
| Цена: | 2 300 ₽ |
| Деталь: | Палец отделения бумаги от фотовала |
| Парткод: | 302C918371 |
| Цена: | 600 ₽ |
| Деталь: | Пружина в узле переноса заряда |
| Парткод: | 5MMW141LX002 |
| Цена: | 80 ₽ |
| Деталь: | Соединитель в узле переноса заряда |
| Парткод: | 5MVT263NN001 |
| Цена: | 160 ₽ |
| Деталь: | Блок проявки |
| Парткод: | DV-410 |
| Цена: | 25 000 ₽ |
| Деталь: | Фотовал |
| Парткод: | 35364 |
| Деталь: | PCB CASSETTE ASSY |
| Парткод: | 2C901100 |
| Деталь: | PLATE SIZE DETECTION |
| Парткод: | 2C907060 |
| Деталь: | LEFT RAIL CASSETTE |
| Парткод: | 2C907080 |
| Деталь: | STOPPER CASSETTE |
| Парткод: | 2C907100 |
| Деталь: | ACTUATOR EMPTY |
| Парткод: | 2C907120 |
| Деталь: | GEAR Z15 REGIST |
| Парткод: | 2C907130 |
| Деталь: | RIGHT GUIDE REGIST |
| Парткод: | 2C907160 |
| Деталь: | ACTUATOR REGIST |
| Парткод: | 2C907170 |
| Деталь: | RIGHT ROLL REGIST |
| Парткод: | 2C907180 |
| Деталь: | SHAFT PAPER FEED |
| Парткод: | 2C907210 |
| Деталь: | SHAFT PICK UP B |
| Парткод: | 2C907230 |
| Деталь: | PLATE PICK UP B |
| Парткод: | 2C907240 |
| Деталь: | HOLDER RETARD |
| Парткод: | 2C907250 |
| Деталь: | SLIDER RAIL |
| Парткод: | 2C907260 |
| Деталь: | LEVER PICK UP |
| Парткод: | 2C907270 |
| Деталь: | TORQUE LIMITER 340 |
| Парткод: | 2C907280 |
| Деталь: | SHAFT RETARD |
| Парткод: | 2C907300 |
| Деталь: | SPRING REGIST B |
| Парткод: | 2C907290 |
| Деталь: | SPRING RETARD |
| Парткод: | 2C907320 |
| Деталь: | SPRING PICK UP |
| Парткод: | 2C907340 |
| Деталь: | SPRING LEVER |
| Парткод: | 2C907350 |
| Деталь: | HOLDER PULLEY A |
| Парткод: | 2C907400 |
| Деталь: | PULLEY GUIDE A |
| Парткод: | 2C907410 |
| Деталь: | HOLDER FEED SHAFT |
| Парткод: | 2C907420 |
| Деталь: | BUSH PAPER FEED C |
| Парткод: | 2C907430 |
| Цена: | 190 ₽ |
| Деталь: | RIGHT MOUNT REGIST |
| Парткод: | 2C907440 |
| Деталь: | PARTS,REGIST CLEANER,ASSY |
| Парткод: | 2C993210 |
| Деталь: | FILM RIGHT TRANS A |
| Парткод: | 2C917220 |
| Деталь: | GROUND PLATE REG R |
| Парткод: | 2C907470 |
| Деталь: | HOLDER SENSOR |
| Парткод: | 2C907480 |
| Деталь: | GROUND PLATE CASS |
| Парткод: | 2C907510 |
| Деталь: | FILM REGIST R |
| Парткод: | 2C907530 |
| Деталь: | GROUND PLATE REG F |
| Парткод: | 2C907540 |
| Деталь: | GUIDE TRANS RIGHT |
| Парткод: | 2C917140 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | WIRE CASSETTE PCB |
| Парткод: | 2C927520 |
| Деталь: | WIRE CASSETTE SW |
| Парткод: | 2C927670 |
| Деталь: | WIRE CASSETTE PE |
| Парткод: | 2C927750 |
| Деталь: | PULLEY,PAPER FEED |
| Парткод: | 2AR07220 |
| Цена: | 1 600 ₽ |
| Деталь: | PULLEY,SEPARATION |
| Парткод: | 2AR07230 |
| Цена: | 360 ₽ |
| Деталь: | PULLEY.LEADING FEED |
| Парткод: | 2AR07240 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | PUSH SWITCH 03 SN |
| Парткод: | SP000360 |
| Деталь: | GEAR 16,BYPASS |
| Парткод: | 29807100 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | SHEET TONER TANK |
| Парткод: | 2C907610 |
| Деталь: | FILM BASE RIB |
| Парткод: | 2C907580 |
| Деталь: | STOPPER PLATE SIZE |
| Парткод: | 2C907640 |
| Деталь: | Комплект для технического обслуживания |
| Парткод: | MK-410 |
| Цена: | 15 400 ₽ |
| Деталь: | WIRE DP |
| Парткод: | 2C927540 |
| Деталь: | GUIDE,SCANNER WIRE |
| Парткод: | 18512340 |
| Деталь: | GUIDE FFC1 |
| Парткод: | 2AV12080 |
| Деталь: | MIRROR B |
| Парткод: | 2AV12160 |
| Деталь: | LABEL GLASS CAUTION |
| Парткод: | 2C905160 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | SPONGE ORIGINAL SIZE |
| Парткод: | 2C912700 |
| Деталь: | FILM FRAME A |
| Парткод: | 2C912180 |
| Деталь: | LAMP SCANNER YG |
| Парткод: | 2C912090 |
| Деталь: | MIRROR FRAME A |
| Парткод: | 2C912100 |
| Деталь: | REFLECTOR SCANNER |
| Парткод: | 2C912110 |
| Деталь: | MIRROR FRAME B |
| Парткод: | 2C912120 |
| Деталь: | ADJUSTING PLATE B |
| Парткод: | 2C912130 |
| Деталь: | MOUNT BASE DF HINGE LEFT |
| Парткод: | 2C912141 |
| Деталь: | RETAINER WIRE |
| Парткод: | 2C912150 |
| Деталь: | GUIDE FFC B |
| Парткод: | 2C912160 |
| Деталь: | PARTS,CONTACT GLASS,M(SP) |
| Парткод: | 2C993170 |
| Деталь: | PARTS,CONTACT GLASS,I(SP) |
| Парткод: | 2C993180 |
| Деталь: | STANDARD PLATE SHADING |
| Парткод: | 2C912190 |
| Деталь: | LEFT SIZE INDICATOR |
| Парткод: | 2C912200 |
| Деталь: | REAR SIZE INDICATOR(M) |
| Парткод: | 2C912210 |
| Деталь: | REAR SIZE INDICATOR(I) |
| Парткод: | 2C912460 |
| Деталь: | LABEL SIZE (METRIC) |
| Парткод: | 2C912440 |
| Деталь: | LABEL SIZE (INCH) |
| Парткод: | 2C912450 |
| Деталь: | FRONT SIZE INDICATOR |
| Парткод: | 2C912600 |
| Деталь: | CONTACT GLASS |
| Парткод: | 2C912250 |
| Деталь: | BELT SCANNER |
| Парткод: | 2C912260 |
| Деталь: | LOWER SEAL SCANNER |
| Парткод: | 2C912270 |
| Деталь: | CONTACT GLASS ADF |
| Парткод: | 2C912280 |
| Деталь: | SPRING SCANNER TENSION |
| Парткод: | 2C912290 |
| Деталь: | MOTOR PLATE SCANNER |
| Парткод: | 2C912300 |
| Деталь: | GEAR Z18/39 |
| Парткод: | 2C912310 |
| Деталь: | Gear Z36 |
| Парткод: | 2C912320 |
| Деталь: | SHAFT MOTOR DRIVE |
| Парткод: | 2C912330 |
| Деталь: | DRUM PULLEY |
| Парткод: | 2C912340 |
| Деталь: | FRONT WIRE SCANNER |
| Парткод: | 2C912350 |
| Деталь: | REAR WIRE SCANNER |
| Парткод: | 2C912360 |
| Деталь: | MOTOR SCANNER |
| Парткод: | 2C912380 |
| Деталь: | MIRROR A |
| Парткод: | 2C912390 |
| Деталь: | PIN SCANNER RETAINING |
| Парткод: | 2C912400 |
| Деталь: | GROUND PLATE SCANNER |
| Парткод: | 2C912410 |
| Деталь: | HOLDER GLASS DF |
| Парткод: | 2C912420 |
| Деталь: | MOUNT PI |
| Парткод: | 2C912220 |
| Деталь: | PLATE DSUB |
| Парткод: | 2C912470 |
| Деталь: | HOLDER CCD WIRE |
| Парткод: | 2C912480 |
| Деталь: | MOUNT DSUB |
| Парткод: | 2C912490 |
| Деталь: | COVER ISU |
| Парткод: | 2C912580 |
| Деталь: | HOLDER FFC A |
| Парткод: | 2C912230 |
| Деталь: | MOUNT RELEASE SWITCH |
| Парткод: | 2C912610 |
| Деталь: | GUIDE RELEASE SWITCH |
| Парткод: | 2C912620 |
| Деталь: | SHAFT RELEASE SWITCH |
| Парткод: | 2C912640 |
| Цена: | 80 ₽ |
| Деталь: | SPRING RELEASE SWITCH |
| Парткод: | 2C912650 |
| Деталь: | GUIDE CCD WIRE |
| Парткод: | 2C912660 |
| Деталь: | SHIELD SCANNER FRAME |
| Парткод: | 2C912670 |
| Деталь: | PULLEY SCANNER |
| Парткод: | 2C912680 |
| Деталь: | GROUND PLATE SCANNER B |
| Парткод: | 2C912690 |
| Деталь: | SENSOR ORIGINAL |
| Парткод: | 2C927090 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | PCB LAMP INVERTER |
| Парткод: | 2C928040 |
| Деталь: | SLIDER SCANNER |
| Парткод: | 2DC12230 |
| Деталь: | CUSHION,CONTACT GLASS |
| Парткод: | 29812291 |
| Деталь: | SPRING,MIRROR HOLDER |
| Парткод: | 2BC12190 |
| Деталь: | SHIELD SCANNER FRAME B |
| Парткод: | 2C912710 |
| Деталь: | SHIELD BASE |
| Парткод: | 2C912720 |
| Деталь: | WIRE SCANNER PI |
| Парткод: | 2C927550 |
| Деталь: | WIRE ORIGINAL SIZE |
| Парткод: | 2C927560 |
| Деталь: | FFC INVERTER |
| Парткод: | 2C927580 |
| Деталь: | FFC CCD |
| Парткод: | 2DA27510 |
| Деталь: | SPACER,SFS-2.6S-B1WM(JST) |
| Парткод: | M0208010 |
| Деталь: | WIRE SADDLE,WS-1NS |
| Парткод: | M2109000 |
| Деталь: | SWITCH PI |
| Парткод: | 2DC27180 |
| Деталь: | SHIELD WIRE PANEL |
| Парткод: | 2C912730 |
| Деталь: | PART,ISU ASSY,SP |
| Парткод: | 2DA93010 |
| Деталь: | PCB MPF SIZE ASSY |
| Парткод: | 2C901050 |
| Деталь: | STRAP LEFT COVER C |
| Парткод: | 2C904360 |
| Деталь: | COVER BYPASS |
| Парткод: | 2C906010 |
| Деталь: | TABLE BYPASS |
| Парткод: | 2C906020 |
| Деталь: | FRONT CURSOR BYPASS |
| Парткод: | 2C906030 |
| Деталь: | REAR CURSOR BYPASS |
| Парткод: | 2C906040 |
| Деталь: | BYPASS SUB TABLE A |
| Парткод: | 2C906050 |
| Деталь: | BYPASS SUB TABLE B |
| Парткод: | 2C906060 |
| Деталь: | GEAR 18 BYPASS |
| Парткод: | 2C906080 |
| Деталь: | TERMINAL PAPER SIZE |
| Парткод: | 2C906090 |
| Деталь: | LIFT PLATE BYPASS |
| Парткод: | 2C906101 |
| Деталь: | SPRING BYPASS LIFT |
| Парткод: | 2C906110 |
| Деталь: | SHEET BYPASS LIFT |
| Парткод: | 2C906120 |
| Деталь: | STOPPER BYPASS |
| Парткод: | 2C906130 |
| Деталь: | PARTS,BYPASS PAD,SP |
| Парткод: | 2C993140 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | SHAFT BYPASS |
| Парткод: | 2C906171 |
| Деталь: | PARTS,BYPASS PULLEY.SP |
| Парткод: | 2C993130 |
| Деталь: | CAM BYPASS |
| Парткод: | 2C906190 |
| Деталь: | CLUTCH BYPASS FEED |
| Парткод: | 2C906200 |
| Деталь: | BYPASS PAPER GUIDE F |
| Парткод: | 2C906210 |
| Деталь: | BYPASS PAPER GUIDE R |
| Парткод: | 2C906220 |
| Деталь: | WIRE MPF |
| Парткод: | 2DA27531 |
| Деталь: | MOUNT LIFT PLATE |
| Парткод: | 2C906241 |
| Деталь: | GROUND PLATE BYPASS |
| Парткод: | 2C906250 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | SOLENOID BYPASS |
| Парткод: | 2C927050 |
| Деталь: | GROUND PLATE LIFT |
| Парткод: | 2C906280 |
| Деталь: | SHEET BYPASS GUIDE |
| Парткод: | 2C906290 |
| Деталь: | SEAL BYPASS GUIDE |
| Парткод: | 2C906300 |
| Деталь: | SEAL BYPASS LIFT |
| Парткод: | 2C906310 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | PLATE FRONT STRAP |
| Парткод: | 2C904490 |
| Деталь: | ACTUATOR BYPASS |
| Парткод: | 2DA06010 |
| Деталь: | WIRE MPF SW |
| Парткод: | 2DA27580 |
| Деталь: | Флажок узла регистрации |
| Парткод: | 302C907171 |
| Цена: | 230 ₽ |
| Деталь: | MOUNT DRIVE UNIT |
| Парткод: | 2C922010 |
| Деталь: | GEAR 122 |
| Парткод: | 2C922020 |
| Деталь: | GEAR 88/34 |
| Парткод: | 2C922030 |
| Деталь: | GEAR 50 |
| Парткод: | 2C922040 |
| Деталь: | GEAR 40 |
| Парткод: | 2C922050 |
| Деталь: | POSITIONING BUSH DRUM |
| Парткод: | 2C922060 |
| Деталь: | GEAR 30/23 |
| Парткод: | 2C922070 |
| Деталь: | GEAR 60 |
| Парткод: | 2C922080 |
| Деталь: | GEAR 25 DPX |
| Парткод: | 2C922100 |
| Деталь: | GEAR 32 DPX |
| Парткод: | 2C922110 |
| Деталь: | MOUNT CONT DRIVE |
| Парткод: | 2C922130 |
| Деталь: | GEAR 25 DEV |
| Парткод: | 2C922140 |
| Деталь: | GEAR 26 DEV |
| Парткод: | 2C922150 |
| Деталь: | SHAFT DPX DRIVE |
| Парткод: | 2C922160 |
| Деталь: | COUPLING CONT P |
| Парткод: | 2C922170 |
| Деталь: | COUPLING CONT S |
| Парткод: | 2C922180 |
| Деталь: | COUPLING DRUM |
| Парткод: | 2C922190 |
| Деталь: | GEAR 43/20 |
| Парткод: | 2C922200 |
| Деталь: | GEAR 20 |
| Парткод: | 2C922210 |
| Деталь: | GEAR 25 |
| Парткод: | 2C922220 |
| Деталь: | GEAR 29 FIX JOINT |
| Парткод: | 2C922230 |
| Деталь: | SPRING FIX JOINT |
| Парткод: | 2C922240 |
| Деталь: | SPRING DRUM COUPLING |
| Парткод: | 2C922250 |
| Деталь: | SPRING CONT P |
| Парткод: | 2C922260 |
| Деталь: | SPRING CONT S |
| Парткод: | 2C922270 |
| Деталь: | MOUNT HV PCB |
| Парткод: | 2C922280 |
| Деталь: | HOLDER GEAR |
| Парткод: | 2C922290 |
| Деталь: | GEAR 40 FIXJOINT |
| Парткод: | 2C922300 |
| Деталь: | GEAR 30 PF |
| Парткод: | 2C922330 |
| Деталь: | GEAR 31 |
| Парткод: | 2C922340 |
| Деталь: | GEAR 51 REG |
| Парткод: | 2C922350 |
| Деталь: | GEAR 25 PF |
| Парткод: | 2C922360 |
| Деталь: | MOUNT REG MOTOR |
| Парткод: | 2C922370 |
| Деталь: | UPPER DUCT |
| Парткод: | 2C923010 |
| Деталь: | LOWER DUCT |
| Парткод: | 2C923020 |
| Деталь: | FILM COOLING |
| Парткод: | 2C923030 |
| Деталь: | MOTOR MAIN |
| Парткод: | 2C927010 |
| Деталь: | MOTOR EJECT |
| Парткод: | 2C927020 |
| Деталь: | FAN COOLING 80-25 |
| Парткод: | 2C927070 |
| Деталь: | CLUTCH FEED |
| Парткод: | 2C927190 |
| Деталь: | MOTOR REGISTRATION |
| Парткод: | 2C927220 |
| Деталь: | WIRE MAIN MOTOR |
| Парткод: | 2C927760 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | PCB REGISTRATION ASSY |
| Парткод: | 2C901190 |
| Деталь: | RING STOPPER |
| Парткод: | 2A806250 |
| Деталь: | PARTS,FK-410(A),SP |
| Парткод: | 2C993051 |
| Деталь: | PARTS,FK-410(E),SP |
| Парткод: | 2C993061 |
| Деталь: | RIGHT FRAME FUSER |
| Парткод: | 2C920010 |
| Деталь: | LEFT FRAME FUSER |
| Парткод: | 2C920020 |
| Деталь: | REAR GUIDE FUSER |
| Парткод: | 2C920030 |
| Деталь: | FRONT GUIDE FUSER |
| Парткод: | 2C920040 |
| Деталь: | ROLLER HEAT |
| Парткод: | 2C920050 |
| Деталь: | ROLLER PRESS |
| Парткод: | 2C920060 |
| Деталь: | FRONT PRESSING PLATE |
| Парткод: | 2C920110 |
| Деталь: | REAR PRESSING PLATE |
| Парткод: | 2C920120 |
| Деталь: | SPRING PRESSURE |
| Парткод: | 2C920130 |
| Деталь: | PLATE HEATER FUSER |
| Парткод: | 2C920140 |
| Деталь: | FRONT BUSH HEAT ROLLER |
| Парткод: | 2C920150 |
| Деталь: | REAR BUSH HEAT ROLLER |
| Парткод: | 2C920160 |
| Деталь: | GEAR Z38 HEAT ROLLER |
| Парткод: | 2C920170 |
| Деталь: | GEAR FUSER Z28 |
| Парткод: | 2C920180 |
| Деталь: | SPRING SEPARATOR |
| Парткод: | 2C920190 |
| Деталь: | GROUND PLATE PRESS |
| Парткод: | 2C920200 |
| Деталь: | HEATER M120 FUSER |
| Парткод: | 2C920230 |
| Деталь: | HEATER M230 FUSER |
| Парткод: | 2C920250 |
| Деталь: | HEATER S120 FUSER |
| Парткод: | 2C920240 |
| Деталь: | HEATER S230 FUSER |
| Парткод: | 2C920260 |
| Деталь: | THERMISTOR FUSER |
| Парткод: | 2C920310 |
| Деталь: | SEAL DISCHAGER |
| Парткод: | 2C920320 |
| Деталь: | BEARING PRESSURE |
| Парткод: | 2C920330 |
| Деталь: | THERMOCUT 180 FUSER |
| Парткод: | 2C920340 |
| Деталь: | WIRE FUSER UNIT |
| Парткод: | 2C927690 |
| Деталь: | Separator Assy |
| Парткод: | 2BR20240 |
| Деталь: | NUT FUSER A |
| Парткод: | 2BY20050 |
| Деталь: | SPACER FUSER UNIT |
| Парткод: | 2DA20010 |
| Деталь: | STOPPER FUSER SPACER |
| Парткод: | 2DA20020 |
| Деталь: | WIRE KEY COUNTER |
| Парткод: | 2C960110 |
| Деталь: | SOCKET ASSY.KEY COUNTER |
| Парткод: | 29236240 |
| Деталь: | PLUG EL 4P.ELP-04V |
| Парткод: | J0220040 |
| Деталь: | SOCKET, KEY COUNTER |
| Парткод: | 25055010 |
| Деталь: | MOUNT KEY COUNTER |
| Парткод: | 2C960100 |
| Деталь: | RETAINER,KEY COUNTER |
| Парткод: | 66060030 |
| Деталь: | MOUNT,KEY COUNTER |
| Парткод: | 66060040 |
| Деталь: | COUNTER-SUNK HEAD SCREW BFHM3X6 (B |
| Парткод: | B2303060 |
| Деталь: | ROUND HEAD SCREW M4X35 |
| Парткод: | B0004350 |
| Деталь: | TRIPLE SCREW M4X6 (BLACK) |
| Парткод: | B4304060 |
| Деталь: | NUT BNM3 (BLACK) |
| Парткод: | C2303000 |
| Деталь: | COVER,KEY COUNTER |
| Парткод: | 2A360010 |
| Деталь: | KEY COUNTER |
| Парткод: | 82142540 |
| Деталь: | PARTS,DEH.ASSY120,SP |
| Парткод: | 2C993190 |
| Деталь: | PARTS,DEH.ASSY240,SP |
| Парткод: | 2C993200 |
| Деталь: | WIRE DEHUMIDIFIER |
| Парткод: | 2C927780 |
| Деталь: | PLATE HEATER J |
| Парткод: | 2C907520 |
| Деталь: | HEATER,CASSETTE(120) |
| Парткод: | 2AV60100 |
| Деталь: | HEATER,CASSETTE(240) |
| Парткод: | 2AV60110 |
| Деталь: | HEATER,DEHUMIDIFIER(120) (KM-2050) |
| Парткод: | 2A727480 |
| Деталь: | HEATER,DEHUMIDIFIER(240) (KM-2050) |
| Парткод: | 2A727490 |
| Деталь: | PLATE SPRING, CASSETTE HOLDER (KM-2050) |
| Парткод: | 3BG02060 |
| Деталь: | MOUNT HEATER (KM-2050) |
| Парткод: | 3HW02030 |
| Деталь: | LABEL CASSETTE TEMP (KM-2050) |
| Парткод: | 2C905120 |
| Деталь: | STOPPER WIRE ASSY SP |
| Парткод: | 35968110 |
| Деталь: | SCANNER NIC ASSY |
| Парткод: | 3JR01010 |
Коды ошибок
C0030
C0070
C0100
C0110
C0130
C0140
C0150
C0160
C0170
C0180
C0210
C0240
C0250
C0280
C0410
C0420
C0440
C0500
C0510
C0610
C0630
C0800
C0820
C0830
C0860
C0870
C0880
C0890
C0900
C0920
C2000
C3100
C3200
C3300
C4000
C4010
C4200
C6000
C6020
C6050
C6400
C7800
C7810
C8170
C8180
Описание
| Error code: | C0030 |
| Description: | FAX PWB system error |
| Causes: | The FAX processing cannot be continued due to the FAX firmware error. |
| Remedy: | 1 Resetting the main power The FAX PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 2 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 3 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. |
| Error code: | C0070 |
| Description: | Toner motor |
| Causes: | Abnormal detection of FAX control PWB incompatibility in the initial communication with the FAX control PWB, any normal communication command is not transmitted. |
| Remedy: | 1 Checking the FAX PWB The incompatible FAX PWB is installed. Install the FAX PWB for the applicable model. 2 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 3 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
| Error code: | C0100 |
| Description: | Charge corona winding problem |
| Causes: | An abnormal status is output from the flash memory. |
| Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. If not repaired, replace the main PWB. |
| Error code: | C0110 |
| Description: | Backup memory data problem (main PWB) • Data in the specified area of the backup memory does not match the specified values. |
| Causes: | Problem with the backup memory data. Defective main PWB. |
| Remedy: | Problem with the backup memory data. Run maintenance item U021 to set the contents of the backup memory data again. Defective main PWB. If the C0110 is displayed after initializing the backup memory, replace the main PWB and check for correct operation. |
| Error code: | C0130 |
| Description: | Backup memory read / write error |
| Causes: | The reading or writing into the flash memory is unavailable. |
| Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reconnect the connectors on the main PWB. At that time, fix or replace the wires if they are pinched by other parts or have any damage. When the issue is not resolved, replace the main PWB. |
| Error code: | C0140 |
| Description: | Backup memory (EEPROM) data problem • Reading data from EEPROM is abnormal. |
| Causes: | Data damage of EEPROM. |
| Remedy: | Contact the Service Administrative Division. |
| Error code: | C0150 |
| Description: | Engine EEPROM reading / writing error |
| Causes: | 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing data. 2. The data read reading in 2 points mismatches 8 times continuously. 3. The read data and the write data mismatch 8 times continuously. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the EEPROM on the engine PWB The EEPROM is not properly installed. Reattach the EEPROM on the engine PWB. 3 Checking the EEPROM on the engine PWB The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. Detaching and reattaching the EEPROM 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0160 |
| Description: | Engine PWB EEPROM data error |
| Causes: | The data read from the EEPROM is judged as abnormal. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Executing U021 The storage data in the EEPROM on the engine PWB is faulty. Execute U021. Executing U021 3 Replacing the EEPROM The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. |
| Error code: | C0170 |
| Description: | Charger count error |
| Causes: | The values in one of the billing counters, life counter or the scanner counter mismatch between the main side and the engine side. |
| Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. Detaching and reattaching the main PWB 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0180 |
| Description: | Machine serial number mismatch |
| Causes: | The machine serial Nos. in the main PWB and the EEPROM on the engine PWB mismatch when turning the power on. |
| Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. Executing U004 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0210 |
| Description: | CPU communication problem • Synchronization cannot be taken between the main CPU and engine CPU. |
| Causes: | Defective main PWB. Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Defective main PWB. Replace the main PWB. Poor contact in the connector terminals. Check the connection of connector YC1 on the main PWB and YC1 on the engine PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0240 |
| Description: | Printer board* communication problem • The printer board does not respond 120 seconds after the power is turned on. |
| Causes: | Poor contact in the connector terminals. DIMM installed incorrectly. Defective main PWB or printer board. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC9 on the main PWB and YC5 on the printer board, and the continuity across the connector terminals. Repair or replace if necessary. DIMM installed incorrectly. Check the connection. Repair or replace if necessary. Defective main PWB or printer board. Replace the main PWB or printer board and check for correct operation. |
| Error code: | C0250 |
| Description: | Network scanner board* communication problem • The response to the alive command to the network scanner transmitted once to 30 s does not come on the contrary three consecutive times or more. • The response to the communication command transmitted to the network scanner does not return 75 s or more. |
| Causes: | Poor contact in the connector terminals. Defective main PWB or network scanner board. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC3 on the main PWB and the connector on the network scanner board, and the continuity across the connector terminals. Repair or replace if necessary. Defective main PWB or network scanner board. Replace the main PWB or network scanner board and check for correct operation. |
| Error code: | C0280 |
| Description: | Communication problem between the fax control PWB and main PWB Communication between the fax control PWB and the main PWB of the machine cannot be performed normally. |
| Causes: | Poor contact in the connector terminals. Defective PWB. |
| Remedy: | Poor contact in the connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective PWB. Replace the fax control PWB or main PWB and check for correct operation. |
| Error code: | C0410 |
| Description: | Exposure lamp on too long |
| Causes: | Poor contact in the connector terminals. Defective DP main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC6 on the scanner PWB and YC1 on the DP main PWB, and the continuity across the connector terminals. Repair or replace if necessary Defective DP main PWB. Replace the DP main PWB and check for correct operation. |
| Error code: | C0420 |
| Description: | Side feeder* communication error • A communication error from side feeder is detected 10 times in succession. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective side feeder main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC15 on the engine PWB and the connector YC3 on the side feeder main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective side feeder main PWB. Replace the side feeder main PWB. |
| Error code: | C0440 |
| Description: | Document finisher communication problem • A communication error from document finisher is detected 10 times in succession. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective finisher main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC14 on the engine PWB and YC4 on the finisher main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective finisher main PWB. Replace the finisher main PWB. |
| Error code: | C0500 |
| Description: | Low fuser temperature |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC3 on the engine PWB and YC2 on the deck PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0510 |
| Description: | Low fuser temperature after warm-up |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC4 on the engine PWB and YC2 on the cassette PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0610 |
| Description: | Lens drive problem |
| Causes: | Defective main PWB. |
| Remedy: | Replace the main PWB and check for correct operation. |
| Error code: | C0630 |
| Description: | DMA error |
| Causes: | DMA transmission of the image data does not finish within the certain time. |
| Remedy: | 1 Checking the connection 0 0 2 Checking the connection 0 0 3 Replacing the wire The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • DPCIS - DP relay PWB • DP relay PWB - Main PWB Wiring diagram 4 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. Detaching and reattaching the DP relay PWB 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
| Error code: | C0800 |
| Description: | Image processing error |
| Causes: | The print sequence jam (J010x) was detected 2 times continuously. |
| Remedy: | 1 Checking the image data The image data is faulty. When this issue occurs only when handling the certain image data, check if the image data is faulty. 2 Checking the situation The printing operation of the certain file is faulty. Acquire the jobs log if the phenomenon can be reproduced by specifying the job when the error was detected.` 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. Detaching and reattaching the main PWB 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
| Error code: | C0820 |
| Description: | Fax control PWB CG ROM checksum error (optional fax) A checksum error occurred with the CG ROM data of the fax control PWB. |
| Causes: | Defective fax software. Defective fax control PWB. |
| Remedy: | Defective fax software. Install the fax software. Defective fax control PWB. Replace the fax control PWB and verify the operation. |
| Error code: | C0830 |
| Description: | FAX PWB flash program area checksum error |
| Causes: | The program stored in the flash memory on the FAX PWB is broken so it cannot perform. |
| Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 2 Checking the FAX PWB The FAX PWB is not properly connected. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 3 Initializing the fax The data in the FAX PWB is faulty. Execute U600 to initialize the FAX. Executing U600 4 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide |
| Error code: | C0860 |
| Description: | Fax control PWB software switch checksum error (optional fax) A checksum error occurred with the software switch value of the fax control PWB. |
| Causes: | Defective fax software. Defective fax control PWB. |
| Remedy: | Defective fax software. Install the fax software. Defective fax control PWB. Replace the fax control PWB and verify the operation. |
| Error code: | C0870 |
| Description: | PC FAX Image data transmission error |
| Causes: | Data was not properly transmitted even if the specified times of retry were made when the large volume data is transmitted between the FAX PWB and the main PWB. |
| Remedy: | 1 Resetting the main power The FAX PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 2 Initializing the fax The data in the FAX PWB is faulty. Execute U600 to initialize the FAX. Executing U600 3 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 4 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB 6 Executing U024 The data stored in the SSD is faulty. Execute U024 [SSD Format]. Executing U024 |
| Error code: | C0880 |
| Description: | Program archive problem (optional fax) When power is turned on, the compressed program in the Flash ROM on the fax control PWB was not successfully decompressed. |
| Causes: | Defective fax software. Defective fax control PWB. |
| Remedy: | Defective fax software. Install the fax software. Defective fax control PWB. Replace the fax control PWB and verify the operation. |
| Error code: | C0890 |
| Description: | Fax control PWB CG FONT archive problem (optional fax) When power is turned on, the compressed CG font in the Flash ROM on the fax control PWB was not successfully decompressed. |
| Causes: | Defective fax software. Defective fax control PWB. |
| Remedy: | Defective fax software. Install the fax software. Defective fax control PWB. Replace the fax control PWB and verify the operation. |
| Error code: | C0900 |
| Description: | 3rd drawer lift problem |
| Causes: | Fax software version or main software is earlier. |
| Remedy: | Check the version of the fax software and the main software, upgrade the version to the compatible software. |
| Error code: | C0920 |
| Description: | 1st drawer lift |
| Causes: | The backup data could not be stored since the file system of the flash memory is faulty. |
| Remedy: | 1 Initializing the fax FAX control values are incorrect Execute U600 to initialize the FAX. Executing U600 2 Checking the FAX PWB The FAX PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 3 Reinstalling the FAX PWB The FAX PWB is not properly installed. Reinstall the FAX PWB. FAX Installation Guide 4 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 5 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide |
| Error code: | C2000 |
| Description: | Drive motor problem Stable OFF is detected for 1 s continuously after drive motor stability. The drive motor is not stabilized in 6 s since the motor is activated. |
| Causes: | Poor contact in the connector terminals. Defective drive transmission system. Defective drive motor. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and the connector on the drive motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective drive motor. Replace the drive motor. Defective engine PWB. Replace the engine PWB and check for correct operation. |
| Error code: | C3100 |
| Description: | Carriage error |
| Causes: | When turning the power on or finishing originals scan through the scanner, the alignment of the home position sensor (turning on / off the sensor) fails and the error is detected. Then, the error is detected twice continuously even the initial operation is executed. |
| Remedy: | 1 Unlocking the scanner mirror frame The scanner mirror frame is not unlocked. Unlock the scanner mirror frame (lamp unit assy). Unlocking the scanner mirror frame 2 Checking the scanner movement A load is applied to the scanner movement. Check the operation of the lamp by U073 or manually moving it. If there is an excess load, check if there are any foreign objects on the optical wire or optical wire drum and clean it. After that, apply grease on the scanner rail. Detaching and reattaching the scanner wires 3 Checking the scanner wires The scanner wires are dirty or come off. Clean and reattach the scanner wires. Detaching and reattaching the scanner wires 4 Checking the scanner motor The scanner motor is faulty. Reattach the scanner motor and reconnect the connector. If not repaired, replace it. 5 Checking the belt tension of the scanner motor A load is applied to the scanner movement since the belt tension is improper. Adjust the scanner motor belt tension properly. 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Scanner motor - Engine PWB Wiring diagram 7 Checking the home position sensor The home position sensor is not properly attached. Reattach the home position sensor. 8 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Home position sensor - Engine PWB Wiring diagram 9 Replacing the home position sensor The home position sensor is faulty. Replace the home position sensor. 10 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 11 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3200 |
| Description: | LED lamp startup error |
| Causes: | The white reference data acquired by lighting the LED lamp at the initial operation does not reach the specified value. Or, the light amount detected by the CCD PWB is not enough. (2 or more LED lamps do not light. The light does not reach the CCD PWB due to condensation.) |
| Remedy: | 1 Checking the LED lamp The LED lamp does not light. Execute U061 [CCD] and check if the LED lamp is lit. If not, replace the lamp unit. After that, execute U411 [Table(ChartA)]. Detaching and reattaching the lamp unit 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • CCD PWB - Engine PWB • LED PWB - CCD PWB Wiring diagram 3 Checking the mirror The mirror or lens is frosted due to condensation. Clean the mirrors. If the condensation at the scanner section is resolved naturally by opening the document processor or the platen cover, turn the power switch off and on. 4 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3300 |
| Description: | CCD AGC error (For the internal count) |
| Causes: | Brightness of the LED lamp is darker while one of the LED lamp does not turn on or brighter than expected when processing the AGC for the CCD lamp. |
| Remedy: | 1 Checking the LED lamp The LED lamp is faulty. Check if the LED lamp lights by executing U061 [CCD]. If it does not light, replace the lamp unit and execute U411 [Table (ChartA) ]. Detaching and reattaching the lamp unit 2 Cleaning the backside of the contact glass The white reference sheet is dirty. Clean the white reference sheet at the backside of the contact glass. Detaching and reattaching the contact glass 3 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is peeled off, deformed or the FFC is broken, replace the FFC. • LED PWB - CCD PWB • CCD PWB - Engine PWB Wiring diagram 4 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 5 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C4000 |
| Description: | Polygon motor synchronization problem • The revolution does not reach the stable speed within 20 s of the START signal. |
| Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
| Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
| Error code: | C4010 |
| Description: | Polygon motor steady-state problem • The polygon motor rotation is not stable for 5 s after the polygon motor rotation has been stabilized. |
| Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
| Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
| Error code: | C4200 |
| Description: | BD steady-state problem • ASIC of the main PWB detects a BD error A for 4000 ms after the polygon motor rotation has been stabilized. |
| Causes: | Defective laser diode. Defective polygon motor. Defective main PWB. Poor contact in connector terminals. |
| Remedy: | Defective laser diode. Replace the laser scanner unit. Defective polygon motor. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB and the continuity across the connector terminals. Repair or replace if necessary. |
| Error code: | C6000 |
| Description: | IH heating error 1 |
| Causes: | The fuser center thermistor temperature does not reach 100°C / 212°F when passing 60s since warm-up starts. Or, the ready display temperature is not detected when passing 420s since the fuser center thermistor temperature reaches 100°C / 212°F during warm-up. |
| Remedy: | 1 Executing U169 The IH setting mismatches the power source specification. Set the fuser destination same as the IH PWB voltage at U169. Executing U169 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature cannot be detected properly due to the broken thermostat or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the current PWB The current PWB is faulty. Replace the current PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. |
| Error code: | C6020 |
| Description: | Fuser center thermistor high temperature error |
| Causes: | The fuser center thermistor detects 240°C / 464°F or more for 1s. |
| Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the thermistor error, etc. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
| Error code: | C6050 |
| Description: | Fuser center thermistor low temperature error |
| Causes: | The fuser center thermistor detects less than 100°C / 212°F for 1s after warm-up, or during print or standby. |
| Remedy: | 1 Changing the wall outlet The power voltage descends by 10% or more of the rated voltage when printing. Connect the power cord to a different wall outlet if the power supply voltage descends by 10% or more of the rated voltage. 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 10 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 11 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit |
| Error code: | C6400 |
| Description: | Zero-cross signal error • The engine PWB does not detect the zero-crossing signal (Z CROSS SIG) for 5 s. |
| Causes: | Poor contact in the connector terminals. Defective DC power source PWB. Defective engine PWB |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and YC6 on the DC power source PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective DC power source PWB. Check if the zero-crossing signal is output from YC6-3 on the DC power source PWB. If not, replace the DC power source PCB. Defective engine PWB. Replace the engine PWB if C6400 is detected while YC6-3 on the DC power source PWB outputs the zero-crossing signal. |
| Error code: | C7800 |
| Description: | Outer thermistor broken (For the internal count) |
| Causes: | The external temperature sensor (external thermistor) cannot be accessed. No response is received from the external thermistor 5 times continuously for 5ms or more when accessing the external thermistor. |
| Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Room temperature sensor - Front PWB?• Front PWB - Engine PWB Wiring diagram 2 Replacing the external temperature sensor The external temperature sensor is faulty. Replace the external temperature sensor. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C7810 |
| Description: | Short-circuited external thermistor • The thermistor input value is 0.5 V or less. |
| Causes: | Poor contact in the connector terminals. Defective humidity sensor. Defective engine PWB |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC13 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective humidity sensor. Replace the humidity sensor. Defective engine PWB. Replace the engine PWB. |
| Error code: | C8170 |
| Description: | DF side registration motor 1 error 1 Object: 4000-sheet finisher |
| Causes: | The home position cannot be detected after passing 3s when relocating to the home position. |
| Remedy: | 1 Checking the front DF side registration guide The front DF side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB Wiring diagram 4 Replacing DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. 5 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8180 |
| Description: | DF side registration motor 1 error 2 Object: 4000-sheet finisher |
| Causes: | J6810/J6811/J6812 (Front DF side registration jam) was detected 2 times continuously. |
| Remedy: | 1 Checking the front DF side registration guide The front side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive components. 3 Replacing the front DF side registration guide drive components The front DF side registration guide drive components are faulty. Replace the front DF side registration guide drive components. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB 5 Checking DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. Executing U240 6 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
