Kyocera KM-6330
Рейтинг
Модули
CASSETTE(120V)
DRIVING, COOLING SECTION I
ACCESORIES & TOOL
CLEANING SECTION II
DECK UNIT III
Frames (DP)
PAPER CONVEYING SECTION (DP)
OPTICAL SECTION II
DRIVING, COOLING SECTION III
IMAGE FORMATION SECTION II
WIRE SECTION II (KM-6330)
CASSETTE(230/240V)
DRIVING SECTION (DP)
FIXING SECTION I (KM-7530)
CLEANING SECTION I
FRAMES
PAPER EJECT SECTION
OPERATION UNIT
PAPER CONVEYING SECTION II
FIXING SECTION I (KM-6330)
REVERSING SECTION (DP)
WIRE SECTION I (KM-6330)
PAPER FEED-IN SECTION III
Electrical Components II
PAPER FEED-IN SECTION I
DUPLEX UNIT II
WIRE SECTION II (KM-7530)
OPTION II
IMAGE FORMATION SECTION I
ELECTRICAL COMPONENTS I (230/240V)
ELECTRICAL COMPONENTS I (120V)
PAPER FEED-IN SECTION II
DRIVING, COOLING SECTION II
DUPLEX UNIT I
DEVELOPING SECTION I
DEVELOPING SECTION II
DUPLEX UNIT III
FIXING SECTION II
REVERSING SECTION
PAPER FEED-IN SECTION (DP)
Electrical Components (DP)
PAPER FEED-IN SECTION IV
Exterior Covers
TONER HOPPER SECTION
OPTION I
DECK UNIT II
PAPER CONVEYING SECTION I (KM-7530)
PAPER EJECT SECTION (DP)
EXTERIOR COVERS (DP)
DECK UNIT I
PAPER CONVEYING SECTION I (KM-6330)
OPTICAL SECTION I
WIRE SECTION I (KM-7530)
Детали PAPER CONVEYING SECTION I (KM-7530)
Деталь: | PARTSASSY CASSETTE(SP) |
Парткод: | 2CJ93150 |
Деталь: | LOWER COVER,CASSETTE |
Парткод: | 2CJ06150 |
Деталь: | SPACER,DRAWER |
Парткод: | 36707850 |
Деталь: | CASSETTE |
Парткод: | 33907012 |
Деталь: | WORK PLATE,CASSETTE |
Парткод: | 33907020 |
Деталь: | WORK PLATE,LIFT CASSETTE |
Парткод: | 33907030 |
Деталь: | CASSETTE LIFT SHAFT ASSY |
Парткод: | 33968220 |
Деталь: | RAIL A,CURSOR |
Парткод: | 33907050 |
Деталь: | CURSOR A,CASSETTE |
Парткод: | 33907060 |
Деталь: | CURSOR B,CASSETTE |
Парткод: | 33907070 |
Деталь: | LEVER,CASSETTE CURSOR |
Парткод: | 33907080 |
Деталь: | LID A,CURSOR |
Парткод: | 33907090 |
Деталь: | RACK,CURSOR |
Парткод: | 2BC06750 |
Деталь: | TERMINAL, PAPER SIZE DETECTION |
Парткод: | 2BC07860 |
Деталь: | RAIL C,CURSOR |
Парткод: | 33907120 |
Деталь: | CURSOR C,CASSETTE |
Парткод: | 33907130 |
Деталь: | LID C,CURSOR |
Парткод: | 33907140 |
Деталь: | LID,PAPER SIZE DETECTION |
Парткод: | 33907160 |
Деталь: | DETECTION PLATE,PAPER SIZE |
Парткод: | 33907170 |
Деталь: | GROUND PLATE,CASSETTE |
Парткод: | 33907190 |
Деталь: | CUSHION,CASSETTE WORK PLATE |
Парткод: | 33907210 |
Деталь: | WIRE,CASSETTE UNIT |
Парткод: | 33927210 |
Деталь: | SIZE DETECTION PCB |
Парткод: | 33928111 |
Деталь: | CUSHION,CASSETTE R |
Парткод: | 60907170 |
Деталь: | LABEL,PAPER UPPER LIMIT |
Парткод: | 61705110 |
Деталь: | GEAR 18,IDLE DEVELOPING |
Парткод: | 65914120 |
Деталь: | SPRING,CURSOR C |
Парткод: | 66007120 |
Деталь: | PIN,CASSETTE WORK PLATE |
Парткод: | 66007310 |
Деталь: | SPRING,PAD |
Парткод: | 66106080 |
Деталь: | PAD,CASSETTE |
Парткод: | 66107100 |
Деталь: | UPPER COVER,CASSETTE |
Парткод: | 2CJ06140 |
Деталь: | PLUG,QR/P15-8S-C(HIROSE) |
Парткод: | J0463080 |
Деталь: | STOPPER,PAPER RETARD |
Парткод: | 2AC68310 |
Деталь: | LABEL,PAPER(INCH) |
Парткод: | 2A005050 |
Деталь: | LABEL,CASSETTE SIZE(INCH K M) |
Парткод: | 68205110 |
Деталь: | MOUNT A,IMAGE FORMATION DRIVE |
Парткод: | 2A022070 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | CLUTCH 32,FEED |
Парткод: | 2AC06260 |
Деталь: | SHAFT B,FEED DRIVE |
Парткод: | 2A022060 |
Деталь: | SPRING, BLADE |
Парткод: | 72418140 |
Деталь: | GEAR 26,CLUTCH |
Парткод: | 45727303 |
Деталь: | BEARING,688ZZNR |
Парткод: | 28107400 |
Деталь: | GEAR B,PF PULLEY |
Парткод: | 45729404 |
Деталь: | SPRING,EJECT COVER |
Парткод: | 33904160 |
Деталь: | JOINT,DEVELOPING DRIVE |
Парткод: | 2A022210 |
Деталь: | COUPLING,DEVELOPING DRIVE |
Парткод: | 2A022220 |
Деталь: | CLUTCH,BYPASS |
Парткод: | 36707230 |
Деталь: | CLUTCH,BYPASS LIFT |
Парткод: | 36707242 |
Деталь: | BELT, DRUM DRIVE |
Парткод: | 36722050 |
Деталь: | MOUNT B,IMAGE FORMATION DRIVE |
Парткод: | 36722220 |
Деталь: | SHAFT,REGISTRATION DRIVE |
Парткод: | 36722350 |
Деталь: | SHAFT A,FEED DRIVE |
Парткод: | 36722360 |
Деталь: | SHAFT, DEVELOPING DRIVE |
Парткод: | 2A022200 |
Деталь: | SHAFT, BYPASS CLUTCH |
Парткод: | 36722390 |
Деталь: | SHAFT SP, BYPASS CLUTCH |
Парткод: | 36722400 |
Деталь: | BUSHING,DEVELOPING DRIVE |
Парткод: | 36722500 |
Деталь: | MOUNT C,IMAGE FORMATION DRIVE |
Парткод: | 36722510 |
Деталь: | RETAINER,REGISTRATION CLUTCH |
Парткод: | 36722520 |
Деталь: | COLLAR,DRUM DRIVE BELT |
Парткод: | 36722690 |
Деталь: | COLLAR,DEVELOPING JOINT |
Парткод: | 36722760 |
Деталь: | GEAR 30,DEVELOPING DRIVE |
Парткод: | 36722770 |
Деталь: | GEAR 30/15,IDLE |
Парткод: | 36722780 |
Деталь: | GEAR 45,DRUM IDLE |
Парткод: | 36722790 |
Деталь: | GEAR 53/44/33 |
Парткод: | 36722800 |
Деталь: | TENSION PLATE,IMAGE FORMATION DRIVE |
Парткод: | 36722821 |
Деталь: | GEAR 27,DEVELOPING IDLE |
Парткод: | 36722830 |
Деталь: | GEAR 18 |
Парткод: | 36722860 |
Деталь: | PULLEY 24/72,IDLE |
Парткод: | 36722870 |
Деталь: | DRIVE GEAR,FIXING SECTION |
Парткод: | 61522040 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | GEAR,DEVELOPING SPIRAL |
Парткод: | 68314090 |
Деталь: | IDLE GEAR 27 |
Парткод: | 72107640 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | BUSHING CLEANING UNIT |
Парткод: | 74718091 |
Деталь: | IDLE PULLEY |
Парткод: | 78622270 |
Деталь: | BEARING 6900ZZNR |
Парткод: | G3169000 |
Деталь: | MOTOR,MAIN (KM-6330) |
Парткод: | 2A027311 |
Деталь: | MOTOR.MAIN (KM-7530) |
Парткод: | 2FA27010 |
Деталь: | IDLE GEAR 22 |
Парткод: | 45728115 |
Деталь: | IDLE GEAR 40 |
Парткод: | 45729502 |
Деталь: | JOINT,DRIVE |
Парткод: | 33422290 |
Деталь: | JUNCTION PLATE,JOINT |
Парткод: | 36723560 |
Деталь: | MOUNT A,CONVEYING MOTOR |
Парткод: | 36722290 |
Деталь: | MOUNT B,CONVEYING MOTOR |
Парткод: | 36722300 |
Деталь: | SHAFT,FIXING DRIVE |
Парткод: | 36722420 |
Деталь: | SHAFT,CONVEYING DRIVE |
Парткод: | 36722480 |
Деталь: | GEAR 36,FIXING JOINT |
Парткод: | 36722680 |
Деталь: | GEAR 45,MOTOR IDLE |
Парткод: | 36722880 |
Деталь: | GEAR 56/25,MOTOR IDLE |
Парткод: | 36722890 |
Деталь: | COUPLER,FIXING JOINT |
Парткод: | 36722990 |
Деталь: | BUSHING 8,MOTOR |
Парткод: | 36723600 |
Деталь: | SPRING,CASSETTE LOCK SOL |
Парткод: | 71707240 |
Деталь: | GEAR 20,DEVELOPER UNIT |
Парткод: | 72114110 |
Деталь: | SPRING, MC BRUSH |
Парткод: | 73808100 |
Деталь: | GEAR, OIL ROLLER |
Парткод: | 73820080 |
Деталь: | FLANGE 30,BELT |
Парткод: | 36723590 |
Деталь: | PULLEY 26/26,DRUM |
Парткод: | 36722750 |
Деталь: | JUNCTION PLATE,DRUM DRIVE |
Парткод: | 36722810 |
Деталь: | JUNCTION PCB ASSY |
Парткод: | 2BC60020 |
Деталь: | PIN B,POSITIONING |
Парткод: | 18568120 |
Деталь: | SPECIAL TOOL,FRAME RETAINING |
Парткод: | 2AC68230 |
Деталь: | SHEET, SCANNER ADJUSTMENT |
Парткод: | 2AC68241 |
Деталь: | STOPPER WIRE ASSY SP |
Парткод: | 35968110 |
Деталь: | HOLDER,SCANNER DRUM |
Парткод: | 35912300 |
Деталь: | STOPPER,WIRE |
Парткод: | 35912310 |
Деталь: | SHEET,DF ADJUSTMENT |
Парткод: | 2A068021 |
Деталь: | MOUNT,DISPOSAL PIPE |
Парткод: | 36723510 |
Деталь: | WIRE SADDLE,WS-2WS |
Парткод: | M2109020 |
Деталь: | COVER,DISPOSAL TANK |
Парткод: | 2A018200 |
Деталь: | SPRING,DISPOSAL TANK |
Парткод: | 2A018210 |
Деталь: | LOWER MOUNT, DISPOSAL SUPPORT |
Парткод: | 2A018220 |
Деталь: | MOUNT BASE,DISPOSAL TANK |
Парткод: | 36718500 |
Деталь: | MOUNT,DISPOSAL SUPPORT |
Парткод: | 36718530 |
Деталь: | SWITCH,COVER OPEN |
Парткод: | 66127010 |
Деталь: | LABEL,HIGH VOLTAGE CAUTION(EXP) |
Парткод: | 2AG05200 |
Деталь: | BASE,DISPOSAL PIPE |
Парткод: | 36718610 |
Деталь: | PULLEY 36,FIXING DRIVE |
Парткод: | 33922360 |
Деталь: | SPRING,DISPOSAL |
Парткод: | 36718560 |
Деталь: | HOUSING,DISPOSAL |
Парткод: | 36718570 |
Деталь: | MOUNT,DISPOSAL SPIRAL DRIVE |
Парткод: | 36722310 |
Деталь: | SHAFT, DISPOSAL SPIRAL DRIVE |
Парткод: | 36722470 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | BUSHING 8,TONER DISPOSAL |
Парткод: | 74318070 |
Деталь: | GEAR 25,TONER DISPOSAL |
Парткод: | 74318080 |
Деталь: | DISPOSAL TANK ASSY |
Парткод: | 36700522 |
Деталь: | LABEL,TONER DISPOSAL TANK |
Парткод: | 36505111 |
Деталь: | TANK,DISPOSAL |
Парткод: | 36718510 |
Деталь: | TAPE,TONER DISPOSAL TANK |
Парткод: | 74318310 |
Деталь: | GEAR 17 PF CLUTCH |
Парткод: | 74722080 |
Деталь: | MOUNT,CLEANING DRIVE |
Парткод: | 2CJ22100 |
Деталь: | SHAFT, CLEANING IDLE |
Парткод: | 2CJ22110 |
Деталь: | SHAFT, CLEANING DRIVE |
Парткод: | 2CJ22120 |
Деталь: | GEAR 16/22,CLEANING DRIVE |
Парткод: | 2CJ22130 |
Деталь: | BUSHING,CLEANING DRIVE |
Парткод: | 2CJ22140 |
Деталь: | IDLE GEAR 22 |
Парткод: | 45728115 |
Деталь: | GEAR,DEVELOPING SLEEVE |
Парткод: | 61714140 |
Деталь: | GEAR 19,SPIRAL ROLLER |
Парткод: | 66018160 |
Деталь: | SEALJOINT |
Парткод: | 2CJ18230 |
Деталь: | REINFORCEMENT, POWER SOURCE |
Парткод: | 2CJ26150 |
Деталь: | RIGHT WEIGHT LCF |
Парткод: | 2A006220 |
Деталь: | INTERLOCK SWITCH B |
Парткод: | 61727540 |
Деталь: | LEFT BASE,DECK PAPER FEED |
Парткод: | 2CJ07050 |
Деталь: | RIGHT HOLDER LCF |
Парткод: | 2CJ07020 |
Деталь: | FRONT MOUNT,LIFT UP PI |
Парткод: | 2A007560 |
Деталь: | SWITCH,FEED |
Парткод: | 35327400 |
Деталь: | LEFT HOLDER LCF |
Парткод: | 2A007740 |
Деталь: | GEAR 24,DEV.UNIT |
Парткод: | 45728105 |
Деталь: | LEFT PULLEY LCF |
Парткод: | 2A006190 |
Деталь: | GEAR 18,LOOP |
Парткод: | 73210370 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | SHAFT LCF,CLUTCH |
Парткод: | 2A007580 |
Деталь: | CLUTCH 35,PAPER FEED |
Парткод: | 63506100 |
Деталь: | GEAR 18 EJECT |
Парткод: | 78722210 |
Деталь: | MOUNT LCF PAPER FEED IDLE |
Парткод: | 2A007540 |
Деталь: | GEAR 19,IDLE |
Парткод: | 36211130 |
Деталь: | GEAR 20,FEED CONVEYING |
Парткод: | 66506640 |
Деталь: | GEAR 31,IDLE |
Парткод: | 36322010 |
Деталь: | FRONT SHAFT LCF,CLUTCH |
Парткод: | 2A007610 |
Деталь: | GEAR 14,MAGNET ROLLER |
Парткод: | 66014120 |
Деталь: | GEAR 28,JOINT |
Парткод: | 45728116 |
Деталь: | SHAFT, IDLE DECK PAPER FEED |
Парткод: | 2A007530 |
Деталь: | LOWER GEAR 18,REGISTRATION |
Парткод: | 18506140 |
Деталь: | GEAR,33 |
Парткод: | 63122130 |
Деталь: | RIGHT MOUNT,LIFT UP PI |
Парткод: | 2CJ07040 |
Деталь: | PIN C,LCD IDLE |
Парткод: | 2A007620 |
Деталь: | LEVER,RELEASE |
Парткод: | 2A007570 |
Деталь: | PIN LCF,SLIDER |
Парткод: | 2A007650 |
Деталь: | LEFT MOVING PLATE,PAPER FEED PULLEY |
Парткод: | 2A007520 |
Деталь: | SPRING, BLADE |
Парткод: | 72418140 |
Деталь: | PIN,BLADE ARM |
Парткод: | 72918050 |
Деталь: | BRUSH,PAPER FEED |
Парткод: | 2A007890 |
Деталь: | EDGING,EDS-0607U(KITAGAWA) |
Парткод: | M2104260 |
Деталь: | GEAR , FRONT |
Парткод: | 75122090 |
Деталь: | RIGHT PULLEY LCF |
Парткод: | 2CJ07010 |
Деталь: | LEFT WIRE,FEED UNIT |
Парткод: | 2CJ27090 |
Деталь: | PAPER SWITCH |
Парткод: | 66006360 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | STOPPER,5 |
Парткод: | 65106140 |
Деталь: | UPPER GUIDE LCF |
Парткод: | 2CJ07060 |
Деталь: | RIGHT SHAFT LCF,PULLEY |
Парткод: | 2CJ07030 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | LEFT WEIGHT LCF |
Парткод: | 2A006230 |
Деталь: | STOPPER LCF,DRIVE |
Парткод: | 2CJ06210 |
Деталь: | LEFT HINGE |
Парткод: | 3AL03013 |
Деталь: | RIGHT HINGE |
Парткод: | 3AL03023 |
Деталь: | SPACER,SRDF |
Парткод: | 3AL02200 |
Деталь: | MOUNT,RELEASE SWITCH |
Парткод: | 3AL02050 |
Деталь: | SWITCH A,INTERLOCK |
Парткод: | 36827140 |
Деталь: | HOLDER,SPRING |
Парткод: | 3AL02080 |
Деталь: | STOPPER,ORIGINAL DETECTION SWITCH |
Парткод: | 3AL02070 |
Деталь: | SPRING,DRUM DRIVE |
Парткод: | 66008070 |
Деталь: | EDGING EDS-1 |
Парткод: | M2104200 |
Деталь: | WIRE SADDLE,YMC-05-H-0(KITAGAWA) |
Парткод: | M2109260 |
Деталь: | MOUNT,DF PCB |
Парткод: | 3BC02040 |
Деталь: | OPEN BUSHING,OCB-375 |
Парткод: | M1203200 |
Деталь: | LEFT STAY, HINGE |
Парткод: | 3AL03032 |
Деталь: | RIGHT STAY,HINGE |
Парткод: | 3AL03045 |
Деталь: | GUIDE,INTERFACE WIRE |
Парткод: | 3AL02100 |
Деталь: | MINIATURE CLAMP,UAMS-07-0 |
Парткод: | M2105730 |
Деталь: | FRONT PIN,FULCRUM |
Парткод: | 29820110 |
Деталь: | PIN,HINGE ADJUSTMENT(M) |
Парткод: | 3AL03050 |
Деталь: | LOCKING WIRE SADDLE,LWS-4NS |
Парткод: | M2109080 |
Деталь: | FRONT FRAME |
Парткод: | 3BC02010 |
Деталь: | REAR FRAME |
Парткод: | 3BC02020 |
Деталь: | STAY, PAPER FEED |
Парткод: | 3BC02030 |
Деталь: | SEAL,PAPER EMPTY |
Парткод: | 65907610 |
Деталь: | SPACER PCB |
Парткод: | 3C002020 |
Деталь: | SPRING,SEPARATION PULLEY |
Парткод: | 3BR07180 |
Деталь: | WIRE SADDLE,YMC-15-0(KITAGAWA) |
Парткод: | M2109350 |
Деталь: | LOWER PULLEY 26,FEED |
Парткод: | 66206190 |
Деталь: | SPRING,LIFT PLATE |
Парткод: | 3BC07250 |
Деталь: | PULLEY,LEADING FEED |
Парткод: | 3BC07010 |
Деталь: | PULLEY,SEPARATION |
Парткод: | 3BC07020 |
Деталь: | UPPER GUIDE,PAPER FEED |
Парткод: | 3BC07031 |
Деталь: | LIFT PLATE,PAPER FEED |
Парткод: | 3BC07050 |
Деталь: | STOPPER,ORIGINAL |
Парткод: | 3BC07260 |
Деталь: | SHAFT, LEADING FEED |
Парткод: | 3BC07080 |
Деталь: | FRONT SHAFT,PAPER FEED |
Парткод: | 3BC07090 |
Деталь: | REAR SHAFT,PAPER FEED |
Парткод: | 3BC07100 |
Деталь: | GUIDE,SEPARATION |
Парткод: | 3BC07230 |
Деталь: | TORQUE LIMITER,BYPASS |
Парткод: | 33906430 |
Деталь: | BELT 138.LEADING FEED |
Парткод: | 3BC07170 |
Деталь: | SWITCH,FEED |
Парткод: | 35327400 |
Деталь: | SWITCH L,FEED |
Парткод: | 63227150 |
Деталь: | SOLENOID,LEADING FEED |
Парткод: | 3AL27070 |
Деталь: | SET LED PCB |
Парткод: | 3AL28020 |
Деталь: | STOPPER 5 |
Парткод: | 2BC06980 |
Деталь: | SWITCH A,INTERLOCK |
Парткод: | 36827140 |
Деталь: | PAD,LIFT |
Парткод: | 3BC07320 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | SPRING, BLADE THRUST |
Парткод: | 73818100 |
Деталь: | JOINT,PULLEY DRIVE SHAFT |
Парткод: | 74306520 |
Деталь: | BUSHING 6 |
Парткод: | 29806560 |
Деталь: | MOUNT,SEPARATION PULLEY |
Парткод: | 3BC07060 |
Деталь: | ARM,SEPARATION PULLEY |
Парткод: | 3BC07071 |
Деталь: | SHAFT,SEPARATION |
Парткод: | 3BC07111 |
Деталь: | PARTS,CLUTCH PAPER FEED,SP |
Парткод: | 3AL93010 |
Деталь: | SHAFT,LIFT PLATE |
Парткод: | 3BC07120 |
Деталь: | ONE-WAY CLUTCH 6 |
Парткод: | 3BC07130 |
Деталь: | LEVER B,LIFT |
Парткод: | 3BC07300 |
Деталь: | STATIC ELIMINATOR,EJECT |
Парткод: | 63212210 |
Деталь: | MOUNT,LIFT SOLENOID |
Парткод: | 3BC07161 |
Деталь: | ACTUATOR,ORIGINAL SET |
Парткод: | 3BC07181 |
Деталь: | BINDING BAND,KB-100-1 |
Парткод: | M0207000 |
Деталь: | LOWER GUIDE,PAPER FEED |
Парткод: | 3BC07040 |
Деталь: | MOUNT,SET SWITCH |
Парткод: | 3BC07200 |
Деталь: | SPRING,ACTUATOR |
Парткод: | 3BC07210 |
Деталь: | SEAL B,RACK |
Парткод: | 65706200 |
Деталь: | PULLEY,EJECT TENSION |
Парткод: | 65710330 |
Деталь: | BINDING BAND,PLT1M |
Парткод: | M2607010 |
Деталь: | MINIATURE CLAMP,UAMS-05-2 |
Парткод: | M2105720 |
Деталь: | SHEET,LIFT PLATE PAPER FEED |
Парткод: | 3BC07270 |
Деталь: | STATIC ELIMINATOR,EJECT |
Парткод: | 3BC07311 |
Деталь: | UPPER SHEET,GUIDE PAPER FEED |
Парткод: | 3BC07290 |
Деталь: | STOPPER 4 |
Парткод: | 34806140 |
Деталь: | FRONT STATIC ELIMINATOR,EJECT |
Парткод: | 3BC07340 |
Деталь: | HOLDER,ADF CONTACT GLASS |
Парткод: | 2AC12280 |
Деталь: | FILM,GLASS DUST SHIELD |
Парткод: | 2AC12430 |
Деталь: | PARTS, CONTACT GLASS, METRIC(SP) |
Парткод: | 2BC93200 |
Деталь: | PARTS, CONTACT GLASS, INCH(SP) |
Парткод: | 2BC93210 |
Деталь: | REAR ORIGINAL SIZE INDICATOR(INCH) |
Парткод: | 2AV12470 |
Деталь: | REAR ORIGINAL SIZE INDICATOR(METRIC) |
Парткод: | 2AV12460 |
Деталь: | LABEL,ORIGINAL SIZE INDICATOR(INCH) |
Парткод: | 2AV12491 |
Деталь: | LABEL,ORIGINAL SIZE INDICATOR(METRIC) |
Парткод: | 2AV12481 |
Деталь: | LEFT ORIGINAL SIZE INDICATOR |
Парткод: | 2A305070 |
Деталь: | CONTACT GLASS |
Парткод: | 35912010 |
Деталь: | STANDARD PLATE,SHADING |
Парткод: | 2BC12130 |
Деталь: | FRONT SEAL, CONTACT GLASS |
Парткод: | 2A612350 |
Деталь: | SPONGE,ORIGINAL SIZE INDICATOR |
Парткод: | 35912531 |
Деталь: | CUSHION,CONTACT GLASS |
Парткод: | 29812291 |
Деталь: | CONTACT GLASS,ADF (KM-6330) |
Парткод: | 35911450 |
Деталь: | CONTACT GLASS.ADF (KM-7530) |
Парткод: | 2FA12030 |
Деталь: | JOINT LCFDRIVE |
Парткод: | 2CJ06200 |
Деталь: | MOUNT A,CONVEYING DRIVE |
Парткод: | 2A022010 |
Деталь: | MOUNT B,CONVEYING DRIVE |
Парткод: | 2A022020 |
Деталь: | SHAFT, DUPLEX IDLE |
Парткод: | 2A022030 |
Деталь: | GEAR 36,CLEANING UNIT |
Парткод: | 45729430 |
Деталь: | GEAR,24 SB |
Парткод: | 29721040 |
Деталь: | PULLEY 31/42,IDLE |
Парткод: | 33922241 |
Деталь: | BELT, PAPER FEED DRIVE |
Парткод: | 33922250 |
Деталь: | GEAR 40,IDLE |
Парткод: | 36722021 |
Деталь: | SHAFT, BELT DRIVE |
Парткод: | 36723540 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | GEAR 32,DUPLEX |
Парткод: | 74322340 |
Деталь: | GEAR 42/32 |
Парткод: | 36722850 |
Деталь: | GEAR 29 |
Парткод: | 2AC22370 |
Деталь: | GEAR 55/45,FEED |
Парткод: | 2AC22440 |
Деталь: | MOUNT,PAPER FEED MOTOR |
Парткод: | 2CJ22020 |
Деталь: | GEAR 38T |
Парткод: | 45728900 |
Деталь: | GEAR 29,IDLE |
Парткод: | 3AK22030 |
Деталь: | GEAR 30,IDLE |
Парткод: | 33922330 |
Деталь: | PULLEY21 IDLE |
Парткод: | 68322210 |
Деталь: | GEAR 35,MAIN UNIT MIXING |
Парткод: | 71814180 |
Деталь: | PULLEY RESISTANCE TENSION |
Парткод: | 34916750 |
Деталь: | PIN A,TENSION |
Парткод: | 36722590 |
Деталь: | TENSION PLATE C,PAPER FEED |
Парткод: | 36722731 |
Деталь: | PULLEY,21 IDLE |
Парткод: | 68322210 |
Деталь: | PIN C,PAPER FEED DRIVE |
Парткод: | 36722580 |
Деталь: | MOUNT LCFLIFT MOTOR |
Парткод: | 2A007690 |
Деталь: | MOTOR,DECK |
Парткод: | 2A027590 |
Деталь: | PIN A,PAPER FEED DRIVE |
Парткод: | 36722560 |
Деталь: | WIRE SADDLE,WS-2NS |
Парткод: | M2109010 |
Деталь: | LOWER MOUNT,PAPER FEED DRIVE |
Парткод: | 36722281 |
Деталь: | GEAR 26,IDLE |
Парткод: | 36722540 |
Деталь: | BUSHING CLEANING UNIT |
Парткод: | 74718091 |
Деталь: | DRIVE IDLE GEAR 24 |
Парткод: | 75722040 |
Деталь: | SPACER, PCS-4S(TAKEUCHI) |
Парткод: | M7008040 |
Деталь: | TENSION PULLEY 20 |
Парткод: | 72622141 |
Деталь: | PIN LCFJDLE |
Парткод: | 2CJ06220 |
Деталь: | LOWER HOLDER,PULLEY |
Парткод: | 2A022120 |
Деталь: | UPPER HOLDER,PULLEY |
Парткод: | 2CJ22030 |
Деталь: | PIN 8,IDLE |
Парткод: | 2A022140 |
Деталь: | BELT,PAPER FEED DRIVE |
Парткод: | 2CJ22010 |
Деталь: | MOTOR,LIFT CASSETTE |
Парткод: | 2AC06250 |
Деталь: | MOTOR,PAPER FEED (KM-6330) |
Парткод: | 2AC22520 |
Деталь: | MOTORPAPER FEED (KM-7530) |
Парткод: | 2FA27020 |
Деталь: | SPRING, BLADE |
Парткод: | 72418140 |
Деталь: | GEAR 30,IDLE EJECT |
Парткод: | 34920200 |
Деталь: | SPRING, TONER TANK |
Парткод: | 48529203 |
Деталь: | BASE,LSU |
Парткод: | 2A013011 |
Деталь: | SPRING RETAINER LEVER |
Парткод: | 78618510 |
Деталь: | EDGING,EDS-2 |
Парткод: | M2104210 |
Деталь: | EDGING,EDS-17L(KITAGAWA) |
Парткод: | M2104250 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | BAND,RSG-100(KITAGAWA) |
Парткод: | M2107250 |
Деталь: | UPPER GUIDE,REGISTRATION |
Парткод: | 2A006120 |
Деталь: | LEFT STAY,IMAGE FORMATION |
Парткод: | 2A008030 |
Деталь: | REAR FRAME,IMAGE FORMATION |
Парткод: | 2A008220 |
Деталь: | REAR RETAINER,DRUM BEARING |
Парткод: | 2A008320 |
Деталь: | FRONT RETAINER,DRUM BEARING |
Парткод: | 2A008330 |
Деталь: | FRONT POSITIONING PLATE,MAIN CHARGER |
Парткод: | 2CJ10010 |
Деталь: | REAR POSITIONING PLATE,MAIN CHARGER |
Парткод: | 2A010070 |
Деталь: | FRONT HOLDER,DRUM |
Парткод: | 2A014500 |
Деталь: | REAR HOLDER,DRUM |
Парткод: | 2A014510 |
Деталь: | REAR LID,DRUM HOLDER |
Парткод: | 2A014520 |
Деталь: | FRONT LID,DRUM HOLDER |
Парткод: | 2A014530 |
Деталь: | TERMINAL,DEVELOPING BIAS |
Парткод: | 2A014550 |
Деталь: | WIRE,IMAGE FORMATION UNIT |
Парткод: | 2A027430 |
Деталь: | SWITCH,DUPLEX CONVEYING |
Парткод: | 2A027570 |
Деталь: | PIN,WIRE TENSION |
Парткод: | 48128606 |
Деталь: | TERMINAL BASE(GND),DRUM |
Парткод: | 29422110 |
Деталь: | GEAR 16T |
Парткод: | 29806490 |
Деталь: | TORQUE LIMITER,MIDDLE DRIVE |
Парткод: | 3AK16240 |
Деталь: | PIN,DRUM RETAINING |
Парткод: | 33408341 |
Деталь: | REAR DRUM ELECTRODE WIRE ASSY |
Парткод: | 36701012 |
Деталь: | FRONT DRUM ELECTRODE WIRE ASSY |
Парткод: | 36701021 |
Деталь: | UPPER ROLLER,REGISTRATION |
Парткод: | 36706511 |
Деталь: | UPPER GEAR 16,REGISTRATION |
Парткод: | 36706530 |
Деталь: | RETAINER,TORQUE LIMITER |
Парткод: | 36706870 |
Деталь: | SPACER,ELECTRODE |
Парткод: | 36708150 |
Деталь: | FRONT FRAME,IMAGE FORMATION |
Парткод: | 36708211 |
Деталь: | RIGHT STAY, IMAGE FORMATION |
Парткод: | 36708240 |
Деталь: | MOUNT,IMAGE FORMATION WIRE |
Парткод: | 36708250 |
Деталь: | LEFT REAR PIN,IMAGE FORMATION POSITIONIN |
Парткод: | 36708300 |
Деталь: | RIGHT REAR PIN,IMAGE FORMATION POSITIONI |
Парткод: | 36708330 |
Деталь: | PLATE SPRING,MC HOLDER |
Парткод: | 36710290 |
Деталь: | REAR GUIDE,DEVELOPING PRESSURE |
Парткод: | 36714190 |
Деталь: | REAR HOLDER,DEVELOPING PRESSURE |
Парткод: | 36714200 |
Деталь: | REAR BASE,DEVELOPING PRESSURE |
Парткод: | 36714210 |
Деталь: | FULCRUM PIN,DEVELOPING PRESSURE |
Парткод: | 36714220 |
Деталь: | FRONT GUIDE,DEVELOPING PRESSURE |
Парткод: | 36714300 |
Деталь: | FRONT HOLDER,DEVELOPING PRESSURE |
Парткод: | 36714310 |
Деталь: | FRONT BASE,DEVELOPING PRESSURE |
Парткод: | 2A014590 |
Деталь: | SPRING,DEVELOPING PRESSURE |
Парткод: | 2A014580 |
Деталь: | UPPER FRONT SPONGE,TRANSFER |
Парткод: | 36714520 |
Деталь: | RIGHT RETAINER,HOPPER |
Парткод: | 2A015250 |
Деталь: | LEFT RETAINER,HOPPER |
Парткод: | 36715180 |
Деталь: | UPPER FRONT GUIDE,TRANSFER |
Парткод: | 36716550 |
Деталь: | REAR SPONGE A,TRANSFER |
Парткод: | 2CJ16020 |
Деталь: | REAR SPONGE B,TRANSFER |
Парткод: | 2CJ16030 |
Деталь: | FRONT LEVER,CLEANING RETAINING |
Парткод: | 36718910 |
Деталь: | REAR LEVER,CLEANING RETAINING |
Парткод: | 36718920 |
Деталь: | SHAFT,CLEANING RETAINING |
Парткод: | 36718940 |
Деталь: | SLIDER,CLEANING RETAINING |
Парткод: | 36718950 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | PIN,DRUM LIFT |
Парткод: | 71802210 |
Деталь: | WIRE SADDLE,WS-2NS |
Парткод: | M2109010 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | BINDING BAND,PLT1M |
Парткод: | M2607010 |
Деталь: | MOUNT,POTENTIAL SENSOR |
Парткод: | 2A010121 |
Деталь: | MOUNT,POTENTIAL SENSOR |
Парткод: | 34010301 |
Деталь: | SENSOR,SURFACE POTENTIAL |
Парткод: | 2CJ28050 |
Деталь: | SPACER,KGLS-4S |
Парткод: | M2108120 |
Деталь: | PARTS,UNIT LSU,SP (KM-6330) |
Парткод: | 2CJ93110 |
Деталь: | PARTS, UNIT LSU, SP (KM-7530) |
Парткод: | 2FA93110 |
Деталь: | MINIATURE CLAMP,UAMS-07-0 |
Парткод: | M2105730 |
Деталь: | PIN,LSU ADJUSTMENT |
Парткод: | 2AC13030 |
Деталь: | MOUNT,LSU ADJUSTMENT |
Парткод: | 2AC13040 |
Деталь: | BASE,SPRING MAIN CHARGER |
Парткод: | 2CJ10020 |
Деталь: | SPRING,MAIN CHARGER |
Парткод: | 2CJ10030 |
Деталь: | FRONT SPONGE, TRANSFER |
Парткод: | 2CJ16040 |
Деталь: | POLYGON MOTOR DRIVE PCB (KM-7530) |
Парткод: | 2FA13020 |
Деталь: | JUNCTION WIRINGS FAN (KM-7530) |
Парткод: | 2FA27070 |
Деталь: | SPACER, WLS-03-0(KITAGAWA) (KM-7530) |
Парткод: | M2108960 |
Деталь: | WIRE,MAIN (KM-6330) |
Парткод: | 2CJ27011 |
Деталь: | CORE 11-25X14 (KM-6330) |
Парткод: | 2A627930 |
Деталь: | CORE 10-20X10 (KM-6330) |
Парткод: | 2A627940 |
Деталь: | PARTSASSY CASSETTE EUR(SP) |
Парткод: | 2CJ93160 |
Деталь: | UPPER COVER,CASSETTE |
Парткод: | 2CJ06140 |
Деталь: | LOWER COVER,CASSETTE |
Парткод: | 2CJ06150 |
Деталь: | CASSETTE |
Парткод: | 33907012 |
Деталь: | WORK PLATE,CASSETTE |
Парткод: | 33907020 |
Деталь: | WORK PLATE,LIFT CASSETTE |
Парткод: | 33907030 |
Деталь: | CASSETTE LIFT SHAFT ASSY |
Парткод: | 33968220 |
Деталь: | RAIL A,CURSOR |
Парткод: | 33907050 |
Деталь: | CURSOR A,CASSETTE |
Парткод: | 33907060 |
Деталь: | CURSOR B,CASSETTE |
Парткод: | 33907070 |
Деталь: | LEVER,CASSETTE CURSOR |
Парткод: | 33907080 |
Деталь: | LID A,CURSOR |
Парткод: | 33907090 |
Деталь: | RACKCURSOR |
Парткод: | 2BC06750 |
Деталь: | RAIL C,CURSOR |
Парткод: | 33907120 |
Деталь: | CURSOR C,CASSETTE |
Парткод: | 33907130 |
Деталь: | LID C,CURSOR |
Парткод: | 33907140 |
Деталь: | DETECTION PLATE,CASSETTE |
Парткод: | 33907180 |
Деталь: | GROUND PLATE,CASSETTE |
Парткод: | 33907190 |
Деталь: | CUSHION,CASSETTE WORK PLATE |
Парткод: | 33907210 |
Деталь: | PAD,CASSETTE |
Парткод: | 66107100 |
Деталь: | CUSHION,CASSETTE R |
Парткод: | 60907170 |
Деталь: | LABEL,PAPER UPPER LIMIT |
Парткод: | 61705110 |
Деталь: | GEAR 18,IDLE DEVELOPING |
Парткод: | 65914120 |
Деталь: | SPRING,CURSOR C |
Парткод: | 66007120 |
Деталь: | PIN,CASSETTE WORK PLATE |
Парткод: | 66007310 |
Деталь: | STOPPERPAPER RETARD |
Парткод: | 2AC68310 |
Деталь: | LABEL,PAPER(METRIC) |
Парткод: | 2A005040 |
Деталь: | LABEL,CASSETTE SIZE(METRIC K M) |
Парткод: | 68205100 |
Деталь: | MOUNT,IDLE GEAR |
Парткод: | 3BC22020 |
Деталь: | IDLE GEAR 15,AGITATION |
Парткод: | 63814100 |
Деталь: | GEAR 20,IDLE |
Парткод: | 65011310 |
Деталь: | MOUNT,PAPER FEED MOTOR |
Парткод: | 3BC22030 |
Деталь: | MOTOR,PAPER FEED |
Парткод: | 3AL27011 |
Деталь: | GROUND PLATE,FIXING UNIT |
Парткод: | 34920190 |
Деталь: | PULLEY 20 |
Парткод: | 78722151 |
Деталь: | MOUNT,CONVEYING MOTOR |
Парткод: | 3BC22040 |
Деталь: | GUIDE B,WIRE PAPER FEED MOTOR |
Парткод: | 3AL02190 |
Деталь: | SPRING CLEANING SOLENOID |
Парткод: | 75018250 |
Деталь: | GEAR 26,SPIRAL ROLLER |
Парткод: | 66018180 |
Деталь: | PULLEY T35/T22/Z22 |
Парткод: | 3AL22010 |
Деталь: | TENSION PLATE,PAPER FEED MOTOR |
Парткод: | 3BC22050 |
Деталь: | PULLEYTIMING BELT |
Парткод: | 48928800 |
Деталь: | GEAR 28 FD |
Парткод: | 76221040 |
Деталь: | GEAR Z22/T35P2M |
Парткод: | 3AL22030 |
Деталь: | PULLEY T28/Z18 |
Парткод: | 3AL22020 |
Деталь: | BELT 190,PAPER FEED MOTOR |
Парткод: | 3BC22070 |
Деталь: | BELT 112,REGISTRATION ROLLER |
Парткод: | 3BC22080 |
Деталь: | COLLAR DEVELOPING UNIT |
Парткод: | 75714210 |
Деталь: | WIRE SADDLE,YMC-05-H-0(KITAGAWA) |
Парткод: | M2109260 |
Деталь: | BELT 100,CONVEYING |
Парткод: | 3BC22100 |
Деталь: | PARTS,FIXING UNIT ASSY 120,SP (KM-7530) |
Парткод: | 2FA93020 |
Деталь: | PARTS,FIXING UNIT ASSY 240,SP (KM-7530) |
Парткод: | 2FA93030 |
Деталь: | BEARING 698ZZ (KM-7530) |
Парткод: | G3006980 |
Деталь: | UPPER LEFT STAY,FIXING (KM-7530) |
Парткод: | 2A020230 |
Деталь: | COVER FIXING ASSY (KM-7530) |
Парткод: | 2A068250 |
Деталь: | LOWER SUPPORT PLATEFIXING EJECT (KM-7530) |
Парткод: | 2FA20040 |
Деталь: | SPRING SHAFT HOOK (KM-7530) |
Парткод: | 73902220 |
Деталь: | SPRING, SEPARA TION CLAW (KM-7530) |
Парткод: | 68320310 |
Деталь: | SPRING, SEPARA TION CLAW (KM-7530) |
Парткод: | 61720760 |
Деталь: | BUSH,FIXING CLEANING (KM-7530) |
Парткод: | 61720460 |
Деталь: | LABEL,HIGH TEMPERATURE CAUTION(EXP) (KM-7530) |
Парткод: | 20305080 |
Деталь: | LABEL,HIGH TEMPERATURE CAUTION(EXP) (KM-7530) |
Парткод: | 2A005200 |
Деталь: | LOWER ROLLER, CLEANING (KM-7530) |
Парткод: | 2A020340 |
Деталь: | PARTSROLLER FIXING EJECT,SP (KM-7530) |
Парткод: | 2FA93080 |
Деталь: | UPPER PULLEYFIXING EJECT (KM-7530) |
Парткод: | 2FA20090 |
Деталь: | BUSH 8 (KM-7530) |
Парткод: | 49028101 |
Деталь: | GEAR 20, DEV UNIT (KM-7530) |
Парткод: | 45728104 |
Деталь: | PRESSING SPRING B,SB (KM-7530) |
Парткод: | 29717220 |
Деталь: | PIN, ORIGINAL HOLDER (KM-7530) |
Парткод: | 29804160 |
Деталь: | SHEET, COVER FIXING EJECT (KM-7530) |
Парткод: | 2FA20140 |
Деталь: | RIGHT SPRING, FEED RELEASE (KM-7530) |
Парткод: | 33906640 |
Деталь: | DIAL,FIXING DRIVE (KM-7530) |
Парткод: | 33920310 |
Деталь: | JOINT,FIXING DRIVE (KM-7530) |
Парткод: | 33920320 |
Деталь: | SPRING,FIXING DRIVE (KM-7530) |
Парткод: | 33920330 |
Деталь: | PIN,FIXING COVER (KM-7530) |
Парткод: | 33920570 |
Деталь: | FULCRUM PIN,FIXING (KM-7530) |
Парткод: | 34920170 |
Деталь: | HOOK, FIXING EJECT RELEASE (KM-7530) |
Парткод: | 36720601 |
Деталь: | LOWER LEFT STAY,FIXING (KM-7530) |
Парткод: | 36720180 |
Деталь: | LOWER MOUNTCLEANING ROLLER (KM-7530) |
Парткод: | 2FA20260 |
Деталь: | LOWER HOUSING,FIXING (KM-7530) |
Парткод: | 36720220 |
Деталь: | UPPER COVER,FIXING EJECT (KM-7530) |
Парткод: | 2FA20050 |
Деталь: | UPPER GUIDE.FIXING EJECT (KM-7530) |
Парткод: | 2FA20060 |
Деталь: | LOWER GUIDEFIXING EJECT (KM-7530) |
Парткод: | 2FA20070 |
Деталь: | LOWER SHEET.COVER FIXING EJECT (KM-7530) |
Парткод: | 2FA20150 |
Деталь: | HANDLE,FIXING EJECT RELEASE (KM-7530) |
Парткод: | 36720290 |
Деталь: | SHAFTFIXING EJECT RELEASE (KM-7530) |
Парткод: | 36720300 |
Деталь: | GEAR, FIXING EJECT JOINT (KM-7530) |
Парткод: | 36720390 |
Деталь: | FRONT HOLDER,FIXING EJECT UNIT (KM-7530) |
Парткод: | 36720430 |
Деталь: | REAR HOLDER, FIXING EJECT UNIT (KM-7530) |
Парткод: | 36720440 |
Деталь: | SEPARATION CLAWB (KM-7530) |
Парткод: | 61720750 |
Деталь: | CLAW,PRESS ROLLER (KM-7530) |
Парткод: | 36720493 |
Деталь: | SHAFT FIXING EJECT PULLEY (KM-7530) |
Парткод: | 2FA20100 |
Деталь: | SHEET,FRAME FIXING EJECT (KM-7530) |
Парткод: | 2FA20200 |
Деталь: | SUPPOR T BAR, SEPARA TION CLA W (KM-7530) |
Парткод: | 2A020470 |
Деталь: | BASE, SUPPORT BAR SEPARATION CLAW (KM-7530) |
Парткод: | 2A020480 |
Деталь: | LABEL, UNIT REPLACEMENT (KM-7530) |
Парткод: | 2BC05150 |
Деталь: | BINDING BAND,KB-100-1 (KM-7530) |
Парткод: | M0207000 |
Деталь: | LOWER SEAL CFIXING (KM-7530) |
Парткод: | 2FA20180 |
Деталь: | LOWER SEAL A.FIXING (KM-7530) |
Парткод: | 2FA20160 |
Деталь: | LOWER SEAL B,FIXING (KM-7530) |
Парткод: | 2FA20170 |
Деталь: | FRONT FRAMEFIXING EJECT (KM-7530) |
Парткод: | 2FA20010 |
Деталь: | REAR FRAME,FIXING EJECT (KM-7530) |
Парткод: | 2FA20020 |
Деталь: | UPPER SUPPORT PLATEFIXING EJECT (KM-7530) |
Парткод: | 2FA20030 |
Деталь: | PARTS,ASSY CLEANING,SP (KM-6330) |
Парткод: | 2CJ93011 |
Деталь: | PARTS,ASSY CLEANING, SP (KM-7530) |
Парткод: | 2FA93140 |
Деталь: | NYLON CLAMP 2N,NK-2N |
Парткод: | M2105000 |
Деталь: | BINDING BAND,T18R |
Парткод: | M2307010 |
Деталь: | SEAL A,CLEANING STAY |
Парткод: | 61718420 |
Деталь: | SEAL B,CLEANING STAY |
Парткод: | 61718430 |
Деталь: | GEAR 26,SPIRAL |
Парткод: | 2CJ18170 |
Деталь: | PIN.DEV.UNIT HANDLE |
Парткод: | 72114320 |
Деталь: | GEAR 19,CLEANING IDLE |
Парткод: | 2CJ18140 |
Деталь: | PIN,MAIN BLADE |
Парткод: | 74318590 |
Деталь: | BRUSH,CLEANING |
Парткод: | 2A018051 |
Деталь: | SPIRAL,CLEANING |
Парткод: | 2A018041 |
Деталь: | BUSHING 6,CLEANING UNIT |
Парткод: | 49028116 |
Деталь: | SCRAPER,SPIRAL |
Парткод: | 2A018150 |
Деталь: | GEAR 23,FUR BRUSH |
Парткод: | 2CJ18160 |
Деталь: | BUSHING 7 CLEANING UNIT |
Парткод: | 77618200 |
Деталь: | BUSHING,6 REGISTRATION |
Парткод: | 29806810 |
Деталь: | STOPPER 5,RING |
Парткод: | 33906630 |
Деталь: | PARTS,BLADE CLEANING(SP) |
Парткод: | 36793312 |
Деталь: | SPONGE,BLADE SIDE |
Парткод: | 2A018140 |
Деталь: | SPONGE A,CLEANING SIDE |
Парткод: | 2A018110 |
Деталь: | MOUNT,BLADE |
Парткод: | 36718050 |
Деталь: | STAY,CLEANING |
Парткод: | 2CJ18300 |
Деталь: | SCRAPER,CLEANING BRUSH |
Парткод: | 2CJ18260 |
Деталь: | GEAR 18,CLEANING DRIVE |
Парткод: | 2CJ18130 |
Деталь: | TERMINAL,CLEANING BRUSH |
Парткод: | 36718110 |
Деталь: | PARTS,UPPER COVER CLEANING(SP) |
Парткод: | 36793341 |
Деталь: | SHUTTER,CLEANING |
Парткод: | 2CJ18211 |
Деталь: | WIND SHIELD PLATE,CLEANING |
Парткод: | 2A023100 |
Деталь: | SPRINGSHUTTER |
Парткод: | 2CJ18520 |
Деталь: | FRONT FRAME,CLEANING |
Парткод: | 2CJ18100 |
Деталь: | REAR FRAME,CLEANING |
Парткод: | 2CJ18111 |
Деталь: | SEAL,BRUSH MOUNT |
Парткод: | 36718180 |
Деталь: | FRONT SEAL A,CLEANING |
Парткод: | 2A018070 |
Деталь: | REAR SEAL A,CLEANING |
Парткод: | 2A018080 |
Деталь: | FILM B,CLEANING |
Парткод: | 2A018120 |
Деталь: | SEAL,CLEANING SHUTTER |
Парткод: | 2CJ18221 |
Деталь: | SLIDE PLATE,BLADE RELEASE |
Парткод: | 36718260 |
Деталь: | INSULATING PLATE,CLEANING BRUSH |
Парткод: | 36718270 |
Деталь: | SPACER,SCRAPING |
Парткод: | 36718281 |
Деталь: | WEIGHT, MAIN BLADE |
Парткод: | 36918040 |
Деталь: | FILM,CLEANING |
Парткод: | 2A018100 |
Деталь: | REAR SHAFT,CLEANING DRIVE |
Парткод: | 2CJ18120 |
Деталь: | SPONGE B,CLEANING |
Парткод: | 36718360 |
Деталь: | INNER SEAL,CLEANING SHUTTER |
Парткод: | 36718370 |
Деталь: | UPPER SPONGE,SEAL |
Парткод: | 36718390 |
Деталь: | LOWER SPONGE,BLADE |
Парткод: | 36718400 |
Деталь: | SHEET,BLADE THRUST |
Парткод: | 36718411 |
Деталь: | GEAR 45,THRUST (KM-6330) |
Парткод: | 2CJ18150 |
Деталь: | GEAR 45JDLE (KM-7530) |
Парткод: | 2FA18030 |
Деталь: | LOWER SPONGE A,CLEANING |
Парткод: | 2A018090 |
Деталь: | SPRING PAPER FEED SECTION |
Парткод: | 78606250 |
Деталь: | WIRE,CLEANING |
Парткод: | 36727160 |
Деталь: | CLEANING COVER ASSY SP |
Парткод: | 2CJ68010 |
Деталь: | COVER,CLEANING |
Парткод: | 2CJ18251 |
Деталь: | SEPARATION CLAW ASSY |
Парткод: | 2CJ00521 |
Деталь: | MOUNT,SEPARATION CLAW |
Парткод: | 2CJ18241 |
Деталь: | CLAW A,SEPARATION |
Парткод: | 2A018160 |
Деталь: | RATCHETSEPARATION |
Парткод: | 62218020 |
Деталь: | SHAFT,SEPARATION CLAW |
Парткод: | 2A018170 |
Деталь: | LOWER BLADE ASSY |
Парткод: | 2A068210 |
Деталь: | LOWER SPONGE,FUR BRUSH |
Парткод: | 2A018130 |
Деталь: | PARTS,MOUNT CLEANING(SP) |
Парткод: | 36793330 |
Деталь: | GUIDE,CLEANING BRUSH |
Парткод: | 36718041 |
Деталь: | SPONGE,BRUSH GUIDE |
Парткод: | 36718230 |
Деталь: | LOWER SPONGE,FUR BRUSH SIDE |
Парткод: | 2A018230 |
Деталь: | LABEL B,UNIT REPLACEMENT |
Парткод: | 2BC05270 |
Деталь: | LEFT GUIDE, CLEANING |
Парткод: | 2FA18010 |
Деталь: | PULLEY, DRUM SEPARATION |
Парткод: | 2A118370 |
Цена: | 90 ₽ |
Деталь: | FRONT FRAME |
Парткод: | 2A002010 |
Деталь: | REAR FRAME |
Парткод: | 2A002020 |
Деталь: | BASE |
Парткод: | 2A002030 |
Деталь: | RIGHT STAY, MIDDLE |
Парткод: | 2A002040 |
Деталь: | FRONT STAY,FRAME |
Парткод: | 2A002110 |
Деталь: | REAR STAY,FRAME |
Парткод: | 2A002120 |
Деталь: | RIGHT MOUNT,CASTER |
Парткод: | 2A002130 |
Деталь: | REAR FULCRUM PLATE,EJECT UNIT SUPPORT |
Парткод: | 36721140 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | HOOK,DUPLEX LOCK |
Парткод: | 2AC07360 |
Деталь: | LOWER STAY,CONVEYING |
Парткод: | 2CJ16070 |
Деталь: | GUIDE FILM,DUPLEX FAN |
Парткод: | 36717130 |
Деталь: | FILM,DUPLEX (KM-6330) |
Парткод: | 36717190 |
Деталь: | GUIDE FILM,DUPLEX FAN AUXILIARY |
Парткод: | 36717140 |
Деталь: | JUNCTION WIRING,DUPLEX FAN (KM-6330) |
Парткод: | 36727640 |
Деталь: | FAN MOTOR |
Парткод: | 63523010 |
Деталь: | TENSION SPRING,DEVELOPER UNIT DRIVE |
Парткод: | 48571305 |
Деталь: | FRONT PIN,FEED SHIFT UNIT SUPPORT |
Парткод: | 36721370 |
Деталь: | SPRING,CASSETTE LOCK |
Парткод: | 33902160 |
Деталь: | SLIDER,IMAGE FORMATION |
Парткод: | 36708260 |
Деталь: | RIGHT MOUNT,SLIDER |
Парткод: | 36716010 |
Деталь: | HOOK,CONVEYING |
Парткод: | 36716620 |
Деталь: | PIN,DETECTION SWITCH |
Парткод: | 71807770 |
Деталь: | UPPER REAR PIN,FEED SHIFT UNIT SUPPORT |
Парткод: | 36721380 |
Деталь: | LEFT MOUNT,SLIDER |
Парткод: | 36716020 |
Деталь: | SLIDER,IMAGE FORMATION |
Парткод: | 36716830 |
Деталь: | MOUNT,KEY COUNTER |
Парткод: | 36726110 |
Деталь: | RIGHT MOUNT,IMAGE FORMATION SLIDER |
Парткод: | 36708280 |
Деталь: | BOLT,LEVEL (KM-6330) |
Парткод: | 66502120 |
Деталь: | BOLT,LEVEL (KM-7530) |
Парткод: | 2FA02010 |
Деталь: | LEFT MOUNT,IMAGE FORMATION SLIDER |
Парткод: | 2A008020 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | SLIDER,DECK |
Парткод: | 2A007300 |
Деталь: | RIGHT MOUNT,DECK RAIL |
Парткод: | 2A007670 |
Деталь: | RIGHT MOUNT,DECK RAIL |
Парткод: | 2A007720 |
Деталь: | WIRE SADDLE,WS-2WS |
Парткод: | M2109020 |
Деталь: | MOUNT A,HANDLE |
Парткод: | 36702150 |
Деталь: | HANDLE |
Парткод: | 74302310 |
Деталь: | REAR FRAME,MIDDLE |
Парткод: | 2CJ02010 |
Деталь: | MOUNT B,HANDLE |
Парткод: | 36702160 |
Деталь: | EDGING,EDS-0607U(KITAGAWA) |
Парткод: | M2104260 |
Деталь: | RIGHT REAR MOUNT,HANDLE |
Парткод: | 36702170 |
Деталь: | WIRE SADDLE,LCT-3.5SI(TAKEUCHI) |
Парткод: | M7009000 |
Деталь: | LEFT MOUNT,RAIL |
Парткод: | 33902070 |
Деталь: | SLIDER,CASSETTE |
Парткод: | 66107084 |
Деталь: | LEFT SLIDER,DECK |
Парткод: | 2A007310 |
Деталь: | LEFT MOUNT,DECK RAIL |
Парткод: | 2A007680 |
Деталь: | WIRE SADDLE,WS-2NS |
Парткод: | M2109010 |
Деталь: | FRONT STAY,DECK FEED |
Парткод: | 2A007660 |
Деталь: | LEFT STAY,DECK PAPER FEED |
Парткод: | 2A007710 |
Деталь: | JUNCTION WIRING,FEED UNIT |
Парткод: | 2A027620 |
Деталь: | LOWER FRONT COVER |
Парткод: | 2CJ04160 |
Деталь: | PARTITION,MACHINE INSIDE COOLING |
Парткод: | 2A023030 |
Деталь: | GROUND PLATE,SCANNER FRAME |
Парткод: | 2A026180 |
Деталь: | HOOK,CASSETTE RETAINING |
Парткод: | 33902120 |
Деталь: | SPRING,CASSETTE HOOK |
Парткод: | 33902130 |
Деталь: | SPACER,KGLS-3S |
Парткод: | M2108000 |
Деталь: | RIGHT REINFORCEMENT |
Парткод: | 33902060 |
Деталь: | RIGHT MOUNT,RAIL |
Парткод: | 36707881 |
Деталь: | CASTER UA |
Парткод: | 2A002170 |
Деталь: | MOUNT,LEVEL BOLT |
Парткод: | 36702270 |
Деталь: | MOUNT,COVER |
Парткод: | 36704230 |
Деталь: | MOUNT B,COVER |
Парткод: | 36704240 |
Деталь: | LOWER FRONT MOUNT,COVER |
Парткод: | 36704300 |
Деталь: | LOWER LEFT INNER COVER |
Парткод: | 2CJ04230 |
Деталь: | MOUNT 3000,FEED |
Парткод: | 36706210 |
Деталь: | RETAINING PIN,UNIT |
Парткод: | 36706230 |
Деталь: | PIN.IMAGE FORMATION UNIT |
Парткод: | 2AC08170 |
Деталь: | FRONT PIN,IMAGE FORMATION POSITIONING |
Парткод: | 36708290 |
Деталь: | PIN,CONVEYING POSITIONING |
Парткод: | 36716681 |
Деталь: | FRONT FULCRUM PLATE,EJECT UNIT SUPPORT |
Парткод: | 36721130 |
Деталь: | JUNCTION WIRING,DUPLEX FAN (KM-7530) |
Парткод: | 2FA27050 |
Деталь: | FAN COOLING(80-15) (KM-7530) |
Парткод: | 2BL27610 |
Деталь: | EDGING, EDS-0607U(KITAGAWA) (KM-7530) |
Парткод: | M2104260 |
Деталь: | LOWER MOUNT, CONVEYING FAN (KM-7530) |
Парткод: | 2FA16010 |
Деталь: | PLATE SPRING,RELEASE HOLDER |
Парткод: | 36720470 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | PULLEYCONVEYING BELT |
Парткод: | 18308260 |
Деталь: | FRONT FRAME,EJECT |
Парткод: | 2A021110 |
Деталь: | REAR FRAME,EJECT |
Парткод: | 2A021120 |
Деталь: | ROLLER,EJECT |
Парткод: | 2A021130 |
Деталь: | UPPER GUIDE,EJECT |
Парткод: | 2A021140 |
Деталь: | GUIDE,CONVEYING SHIFT |
Парткод: | 2A021150 |
Деталь: | TENSION PLATE,EJECT DRIVE |
Парткод: | 2A021160 |
Деталь: | LEFT ROLLER,TURN OVER FEED |
Парткод: | 2A021170 |
Деталь: | LEFT GUIDE,TURN OVER EJECT |
Парткод: | 2A021180 |
Деталь: | UPPER RIGHT GUIDE,TURN OVER EJECT |
Парткод: | 2A021190 |
Деталь: | INNER RIGHT GUIDE,TURN OVER EJECT |
Парткод: | 2A021201 |
Деталь: | RIGHT SUPPORT PLATE,GUIDE TURN OVER MIDD |
Парткод: | 2A021210 |
Деталь: | BELT 214,TURN OVER DRIVE |
Парткод: | 2A021230 |
Деталь: | COLLAR 47.2,EJECT JOINT |
Парткод: | 2A021240 |
Деталь: | GUIDE FILM,TURN OVER EJECT |
Парткод: | 2A021250 |
Деталь: | SUPPORT PLATE,TURN OVER EJECT RELEASE |
Парткод: | 2A021260 |
Деталь: | COVER,EJECT |
Парткод: | 2CJ21020 |
Деталь: | HANDLE,EJECT COVER RELEASE |
Парткод: | 2CJ21010 |
Деталь: | SHAFT,EJECT UNIT FULCRUM |
Парткод: | 2A021360 |
Деталь: | UPPER ROLLER,EJECT |
Парткод: | 2A021370 |
Деталь: | JUNCTION WIRING,TURN OVER EJECT SW |
Парткод: | 2A027470 |
Деталь: | IDLE GEAR 40 |
Парткод: | 45729502 |
Деталь: | SPRING, BLADE |
Парткод: | 72418140 |
Деталь: | FRONT PIN,FULCRUM |
Парткод: | 29820110 |
Деталь: | PIN,BEARING |
Парткод: | 29820420 |
Деталь: | BUSHING 6,LOWER REGISTRATION ROLLER |
Парткод: | 72107160 |
Деталь: | RIGHT SPRING,FEED RELEASE |
Парткод: | 33906640 |
Деталь: | RIGHT HOOK,FEED RELEASE |
Парткод: | 33906670 |
Деталь: | SHAFT,EJECT UNIT RELEASE |
Парткод: | 36721100 |
Деталь: | FRONT FELT, LOWER DEV. ROLLER |
Парткод: | 61714370 |
Деталь: | PULLEY 24,EJECT |
Парткод: | 63212180 |
Деталь: | PULLEY 22,FEED |
Парткод: | 65722030 |
Деталь: | GEAR 28,IDLE DRIVE |
Парткод: | 67322180 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | STATIC ELIMINATOR |
Парткод: | 68317050 |
Деталь: | SWITCH,DUPLEX CONVEYING |
Парткод: | 68727030 |
Деталь: | SPRING, PRESSING |
Парткод: | 72707161 |
Деталь: | COLLAR 16,EJECT DRIVE |
Парткод: | 33921170 |
Деталь: | WIRE SADDLE,LWS-1S |
Парткод: | M2109180 |
Деталь: | FRONT PIN,TURN OVER EJECT SUPPORT |
Парткод: | 2A021280 |
Деталь: | FULCRUM PLATE,EJECT UNIT |
Парткод: | 36721110 |
Деталь: | REAR MOUNT,EJECT UNIT SUPPORT |
Парткод: | 2A021380 |
Деталь: | PARTS,ASSY OPERATION UNIT,EXP-SP |
Парткод: | 2CJ93100 |
Деталь: | COVER OPE UNIT E |
Парткод: | 2BJ25291 |
Деталь: | SHEET TABLET |
Парткод: | 2BJ25370 |
Деталь: | UPPER KEY FUNCTION |
Парткод: | 2BJ25101 |
Деталь: | KEY OPERATION 10 |
Парткод: | 2BJ25020 |
Деталь: | KEY PRINT E |
Парткод: | 2BJ25300 |
Деталь: | KEY STOP |
Парткод: | 2BJ25040 |
Деталь: | KEY RESET |
Парткод: | 2BJ25050 |
Деталь: | KEY SAVER |
Парткод: | 2BJ25060 |
Деталь: | KEY INTERRUPT |
Парткод: | 2BJ25070 |
Деталь: | KEY CONTROL |
Парткод: | 2BJ25080 |
Деталь: | KEY INIT |
Парткод: | 2BJ25090 |
Деталь: | VOLUME OPE UNIT |
Парткод: | 2BJ25250 |
Деталь: | BARRIER TABLET |
Парткод: | 2BJ25240 |
Деталь: | RIGHT DUST SHIELD |
Парткод: | 2BJ25230 |
Деталь: | LEFT DUST SHIELD |
Парткод: | 2BJ25210 |
Деталь: | OPERATION ASSY B |
Парткод: | 2BJ01071 |
Деталь: | TABLET OPERATION |
Парткод: | 2BJ27060 |
Деталь: | SPONGE LCDA |
Парткод: | 2BJ25270 |
Деталь: | SPONGE LCD B |
Парткод: | 2BJ25280 |
Деталь: | LCD PCB |
Парткод: | 2CJ28080 |
Деталь: | WIRE LCD |
Парткод: | 2BJ27140 |
Деталь: | GROUND PLATE LCD A |
Парткод: | 2BJ04220 |
Деталь: | GROUND PLATE LCD C |
Парткод: | 2BJ04240 |
Деталь: | CENTER DUST SHIELD |
Парткод: | 2BJ25220 |
Деталь: | OPERATION ASSY A |
Парткод: | 2BJ01031 |
Деталь: | GROUND PLATE LCD B |
Парткод: | 2BJ04230 |
Деталь: | SHIELD LCD |
Парткод: | 2BJ04210 |
Деталь: | RIGHT MOUNT,OPERATION COVER |
Парткод: | 2CJ25020 |
Деталь: | CENTER MOUNT,OPERATION COVER |
Парткод: | 2CJ25030 |
Деталь: | EDGING,EDS-17L(KITAGAWA) |
Парткод: | M2104250 |
Деталь: | LEFT MOUNT,OPERATION COVER |
Парткод: | 2CJ25040 |
Деталь: | RIGHT LID OPE UNIT |
Парткод: | 2BJ25201 |
Деталь: | LEFT KEY COPIER E |
Парткод: | 2BJ25310 |
Деталь: | LEFT KEY PRINTER E |
Парткод: | 2BJ25320 |
Деталь: | LEFT KEY SCANNER E |
Парткод: | 2BJ25330 |
Деталь: | RETAINER LCD |
Парткод: | 2BJ25390 |
Деталь: | LEFT LID OPE UNIT |
Парткод: | 2BJ25151 |
Деталь: | LEFT LID COPIER |
Парткод: | 2BJ25161 |
Деталь: | LEFT LID PRINTER |
Парткод: | 2BJ25171 |
Деталь: | LEFT LID SCANNER |
Парткод: | 2BJ25181 |
Деталь: | SPACER,KGPS-8RF(KITAGAWA) |
Парткод: | M2108850 |
Деталь: | SPACER,KGPS-5RF(KITAGAWA) |
Парткод: | M2108880 |
Деталь: | RETAINER,OPERATION COVER |
Парткод: | 2CJ25050 |
Деталь: | SHEET OPERATION PCB |
Парткод: | 2BJ25380 |
Деталь: | SHEET FUNCTION (EXP) |
Парткод: | 2BC25020 |
Деталь: | SHEET LCD A |
Парткод: | 2BJ25400 |
Деталь: | SHEET LCD B |
Парткод: | 2BJ25410 |
Деталь: | SHEET LCDC |
Парткод: | 2BJ25420 |
Деталь: | OUTER COVER,OPERATION |
Парткод: | 2CJ25011 |
Деталь: | BASE,CONVEYING |
Парткод: | 36716123 |
Деталь: | EDGING,EDS-2 |
Парткод: | M2104210 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | SPACER,KGLS-10RT(KITAGAWA) |
Парткод: | M2108640 |
Деталь: | SPACER,KGPS-10RF(KITAGAWA) |
Парткод: | M2108870 |
Деталь: | WIRE SADDLE,LWS-3S(KITAGAWA) |
Парткод: | M2109230 |
Деталь: | LABEL,CONVEYING RELEASE(EUR) |
Парткод: | 2A005090 |
Деталь: | JUNCTION WIRING,TRANSFER BELT |
Парткод: | 2A027500 |
Деталь: | TRANSFER BELT HIGH VOLTAGE PCB |
Парткод: | 2A028091 |
Деталь: | PULLEYCLEANING UNIT |
Парткод: | 48927324 |
Деталь: | BUSH 8 |
Парткод: | 49028101 |
Деталь: | GROUND PLATE,TRANSFER |
Парткод: | 36716960 |
Деталь: | GEAR,FULCRUM |
Парткод: | 29820200 |
Деталь: | Pressing Spring |
Парткод: | 77706461 |
Деталь: | SHAFT BELT PRESSURE ASSY |
Парткод: | 36768220 |
Деталь: | CAM,BELT PRESSURE |
Парткод: | 36716150 |
Деталь: | FRONT SPRING,PRESSURE |
Парткод: | 36716160 |
Деталь: | REAR SPRING,PRESSURE |
Парткод: | 36716170 |
Деталь: | REGISTRATION GUIDE ASSY SP |
Парткод: | 2CJ68131 |
Деталь: | LOWER GUIDE, REGISTRATION |
Парткод: | 2CJ16050 |
Деталь: | LOWER FILMREGISTRATION |
Парткод: | 2CJ16060 |
Деталь: | RIGHT FILM,RESISTANCE |
Парткод: | 36706580 |
Деталь: | FRONT PIN,IMAGE FORMATION POSITIONING |
Парткод: | 36708290 |
Деталь: | HANDLE,CONVEYING |
Парткод: | 36716032 |
Деталь: | PIN,RELEASE RETAINING |
Парткод: | 36716040 |
Деталь: | SHAFT,TRANSFER RELEASE |
Парткод: | 36716091 |
Деталь: | SUPPORT PLATE,TRANSFER RELEASE |
Парткод: | 36716100 |
Деталь: | SHAFT,RELEASE PULLEY |
Парткод: | 36716110 |
Деталь: | BUSHING 4,REGISTRATION |
Парткод: | 72906070 |
Деталь: | BASE,TRANSFER |
Парткод: | 36716131 |
Деталь: | LEVER,BELT PRESSURE |
Парткод: | 36716180 |
Деталь: | SPRING,TRANSFER PRESSING |
Парткод: | 36716330 |
Деталь: | LOWER FRONT GUIDE,TRANSFER |
Парткод: | 36716470 |
Деталь: | PIN,TRANSFER FULCRUM |
Парткод: | 36716540 |
Деталь: | SPRING,LEVER PRESSURE |
Парткод: | 36716570 |
Деталь: | STOPPER,TRANSFER RELEASE |
Парткод: | 36716590 |
Деталь: | SPACER,CONVEYING HANDLE |
Парткод: | 36716600 |
Деталь: | PIN 45,TRANSFER |
Парткод: | 36716700 |
Деталь: | PIN 25/32,TRANSFER |
Парткод: | 36716710 |
Деталь: | BUSHING,BYPASS SHAFT |
Парткод: | 60907880 |
Деталь: | TERMINAL A,TC CATCHER |
Парткод: | 61716260 |
Деталь: | SPRING,STACK BYPASS GEAR |
Парткод: | 63706260 |
Деталь: | GEAR 45 DEVELOPING DRIVE |
Парткод: | 67322050 |
Деталь: | BUSHING 6,LOWER REGISTRATION ROLLER |
Парткод: | 72107160 |
Деталь: | GEAR 18,LOOP |
Парткод: | 73210370 |
Деталь: | BUSHING CLEANING UNIT |
Парткод: | 74718091 |
Деталь: | LOWER ROLLER,REGISTRATION |
Парткод: | 36706520 |
Деталь: | PARTS 120,ASSY FIXING UNIT(S P) (KM-6330) |
Парткод: | 2CJ93031 |
Деталь: | PARTS 240,ASSY FIXING UNIT(S P) (KM-6330) |
Парткод: | 2CJ93041 |
Деталь: | BEARING 698ZZ (KM-6330) |
Парткод: | G3006980 |
Деталь: | UPPER LEFT STAY,FIXING (KM-6330) |
Парткод: | 2A020230 |
Деталь: | COVER FIXING ASSY (KM-6330) |
Парткод: | 2A068250 |
Деталь: | PRESSING SPRING CIS (KM-6330) |
Парткод: | 78012030 |
Деталь: | SPRING SHAFT HOOK (KM-6330) |
Парткод: | 73902220 |
Деталь: | SPRING,SEPARATION CLAW (KM-6330) |
Парткод: | 68320310 |
Деталь: | SPRING,SEPARATION CLAW (KM-6330) |
Парткод: | 61720760 |
Деталь: | BUSH,FIXING CLEANING (KM-6330) |
Парткод: | 61720460 |
Деталь: | LABEL,HIGH TEMPERATURE CAUTION(EXP) (KM-6330) |
Парткод: | 20305080 |
Деталь: | LABEL,HIGH TEMPERATURE CAUTION(EXP) (KM-6330) |
Парткод: | 2A005200 |
Деталь: | PARTS,LOWER ROLLER A CLEANING(SP) (KM-6330) |
Парткод: | 2CJ93131 |
Деталь: | ROLLER,FIXING EJECT (KM-6330) |
Парткод: | 2A020420 |
Деталь: | REAR PULLEY,FIXING (KM-6330) |
Парткод: | 2A020450 |
Деталь: | BUSH 8 (KM-6330) |
Парткод: | 49028101 |
Деталь: | GEAR 20,DEVUNIT (KM-6330) |
Парткод: | 45728104 |
Деталь: | PRESSING SPRING B,SB (KM-6330) |
Парткод: | 29717220 |
Деталь: | PIN,ORIGINAL HOLDER (KM-6330) |
Парткод: | 29804160 |
Деталь: | PIN,BEARING (KM-6330) |
Парткод: | 29820420 |
Деталь: | RIGHT SPRING,FEED RELEASE (KM-6330) |
Парткод: | 33906640 |
Деталь: | DIAL,FIXING DRIVE (KM-6330) |
Парткод: | 33920310 |
Деталь: | JOINT,FIXING DRIVE (KM-6330) |
Парткод: | 33920320 |
Деталь: | SPRING,FIXING DRIVE (KM-6330) |
Парткод: | 33920330 |
Деталь: | PIN,FIXING COVER (KM-6330) |
Парткод: | 33920570 |
Деталь: | FULCRUM PIN,FIXING (KM-6330) |
Парткод: | 34920170 |
Деталь: | HOOK,FIXING EJECT RELEASE (KM-6330) |
Парткод: | 36720601 |
Деталь: | LOWER LEFT STAY,FIXING (KM-6330) |
Парткод: | 36720180 |
Деталь: | LOWER MOUNT, CLEANING ROLLER (KM-6330) |
Парткод: | 2CJ20060 |
Деталь: | LOWER HOUSING,FIXING (KM-6330) |
Парткод: | 36720220 |
Деталь: | COVER FIXING EJECT ASSY (KM-6330) |
Парткод: | 2A068260 |
Деталь: | UPPER GUIDE.FIXING EJECT (KM-6330) |
Парткод: | 2CJ20110 |
Деталь: | LOWER GUDEFIXING EJECT (KM-6330) |
Парткод: | 2CJ20070 |
Деталь: | PLATE SPRING,FIXING EJECT PULLEY (KM-6330) |
Парткод: | 36720280 |
Деталь: | HANDLE,FIXING EJECT RELEASE (KM-6330) |
Парткод: | 36720290 |
Деталь: | SHAFT,FIXING EJECT RELEASE (KM-6330) |
Парткод: | 36720300 |
Деталь: | GEAR,FIXING EJECT JOINT (KM-6330) |
Парткод: | 36720390 |
Деталь: | FRONT HOLDER,FIXING EJECT UNIT (KM-6330) |
Парткод: | 36720430 |
Деталь: | REAR HOLDER,FIXING EJECT UNIT (KM-6330) |
Парткод: | 36720440 |
Деталь: | SEPARATION CLAW B (KM-6330) |
Парткод: | 61720750 |
Деталь: | CLAW, PRESS ROLLER (KM-6330) |
Парткод: | 36720493 |
Деталь: | SHAFT,FIXING EJECT PULLEY (KM-6330) |
Парткод: | 36720581 |
Деталь: | REINFORCEMENT,FIXING EJECT COVER (KM-6330) |
Парткод: | 2A020500 |
Деталь: | SUPPORT BAR,SEPARATION CLAW (KM-6330) |
Парткод: | 2A020470 |
Деталь: | BASE,SUPPORT BAR SEPARATION CLAW (KM-6330) |
Парткод: | 2A020480 |
Деталь: | LABEL, UNIT REPLACEMENT (KM-6330) |
Парткод: | 2BC05150 |
Деталь: | BINDING BAND,KB-100-1 (KM-6330) |
Парткод: | M0207000 |
Деталь: | BUSHING 6 |
Парткод: | 29806560 |
Деталь: | GUIDE,RESISTANCE |
Парткод: | 3BC08031 |
Деталь: | WIRE SADDLE,YMC-05-H-0(KITAGAWA) |
Парткод: | M2109260 |
Деталь: | HANDLE,REGISTRATION GUIDE |
Парткод: | 3BC08190 |
Деталь: | SHAFT,REGISTRATION PULLEY |
Парткод: | 3BC08090 |
Деталь: | ROLLER,LOOP |
Парткод: | 3AL10020 |
Деталь: | GEAR 18,FUR BRUSH |
Парткод: | 33918100 |
Деталь: | SHAFT, EJECT PULLEY |
Парткод: | 3BC08061 |
Деталь: | LOWER LEFT SHEET B,GUIDE LOOP |
Парткод: | 3AL10281 |
Деталь: | GUIDE,EJECT |
Парткод: | 3BC08042 |
Деталь: | PULLEY,EJECT |
Парткод: | 3AL08170 |
Деталь: | PULLEY B,REGISTRATION |
Парткод: | 3BC08220 |
Деталь: | PLATE SPRING,EJECT GUIDE |
Парткод: | 3AL08260 |
Деталь: | SHEET,GUIDE EJECT |
Парткод: | 3AL08410 |
Деталь: | SPRING,EJECT PULLEY |
Парткод: | 3AL08560 |
Деталь: | GUIDE,LOOP FEED SHIFT |
Парткод: | 3AL10032 |
Деталь: | LEFT GUIDE,LOOP |
Парткод: | 3AL10166 |
Деталь: | LEFT SHEETGUIDE LOOP |
Парткод: | 3AL10181 |
Деталь: | REINFORCEMENT,REGISTRATION GUIDE |
Парткод: | 3BC08180 |
Деталь: | SHAFT,FULCRUM PULLEY |
Парткод: | 3AL10040 |
Деталь: | SHAFT,LOOP PULLEY |
Парткод: | 3AL10060 |
Деталь: | FRONT HOLDER,LOOP PULLEY |
Парткод: | 3AL10120 |
Деталь: | REAR HOLDER,LOOP PULLEY |
Парткод: | 3AL10200 |
Деталь: | GUIDE,LOOP |
Парткод: | 3AL10011 |
Деталь: | SHEETGUIDE LOOP |
Парткод: | 3AL10170 |
Деталь: | SHEET,LOOP PULLEY |
Парткод: | 3AL10210 |
Деталь: | LEVER,LOOP PULLEY SOLENOID |
Парткод: | 3AL10091 |
Деталь: | MOUNT,LOOP PULLEY SOLENOID |
Парткод: | 3AL10143 |
Деталь: | SOLENOID,LOOP PULLEY |
Парткод: | 3AL27111 |
Деталь: | SPRING,LOOP PULLEY SOLENOID |
Парткод: | 3AL10230 |
Деталь: | LEVER,LOOP FEED SHIFT |
Парткод: | 3AL10081 |
Деталь: | LEVER,LOOP FEED SHIFT SOLENOID |
Парткод: | 3AL10110 |
Деталь: | LEVER,LOOP PULLEY |
Парткод: | 3AL10100 |
Деталь: | BUSHING FEED BACK ROLLER |
Парткод: | 60606101 |
Деталь: | PIN B,PAPER FEED GUIDE |
Парткод: | 3BC07330 |
Деталь: | SOLENOID,FEED SHIFT |
Парткод: | 3AL27080 |
Деталь: | SPRING,EJECT FEED SHIFT |
Парткод: | 3AL08490 |
Деталь: | SPRING,REGISTRATION PULLEY |
Парткод: | 3BC08130 |
Деталь: | SPRING,SAFETY SWITCH LEVER |
Парткод: | 63526080 |
Деталь: | UPPER SHEET B,CONVEYING PULLEY |
Парткод: | 3AL08590 |
Деталь: | SHEET,EJECT PULLEY |
Парткод: | 3BC08140 |
Деталь: | STOPPER 4 |
Парткод: | 34806140 |
Деталь: | BINDING BAND,PLT1M |
Парткод: | M2607010 |
Деталь: | LEFT PIN,GUIDE LOOP |
Парткод: | 3AL10290 |
Деталь: | STOP RING E3 |
Парткод: | 65016080 |
Деталь: | WIRE,SECONDARY (KM-6330) |
Парткод: | 2CJ27031 |
Деталь: | WIRE,PRIMARY (KM-6330) |
Парткод: | 2CJ27040 |
Деталь: | WIRE,HDD (KM-6330) |
Парткод: | 2BC27510 |
Деталь: | WIRE A,JUNCTION (KM-6330) |
Парткод: | 2CJ27070 |
Деталь: | CORE 11-25X14 (KM-6330) |
Парткод: | 2A627930 |
Деталь: | DUCT,INHALATION |
Парткод: | 2CJ07100 |
Деталь: | UPPER COVER,VERTICAL CONVEYING |
Парткод: | 2CJ06070 |
Деталь: | CUSHION,CONTACT GLASS |
Парткод: | 29812291 |
Деталь: | STOPPER 5,RING |
Парткод: | 33906630 |
Деталь: | RIGHT SPRING,FEED RELEASE |
Парткод: | 33906640 |
Деталь: | SHAFT, FEED PULLEY |
Парткод: | 33906651 |
Деталь: | RIGHT PULLEY,FEED |
Парткод: | 33906660 |
Деталь: | RIGHT HOOK,FEED RELEASE |
Парткод: | 33906670 |
Деталь: | UPPER GUIDE,VERTICAL CONVEYING |
Парткод: | 36706733 |
Деталь: | SHAFT,VERTICAL CONVEYING FULCRUM |
Парткод: | 36706750 |
Деталь: | SHAFT, VERTICAL CONVEYING RELEASE |
Парткод: | 36706760 |
Деталь: | SUPPORT PLATE,VERTICAL CONVEYING RELEASE |
Парткод: | 36706770 |
Деталь: | PIN,VERTICAL CONVEYING RELEASE |
Парткод: | 36706780 |
Деталь: | SPRING,VERTICAL CONVEYING DAMPER |
Парткод: | 36706800 |
Деталь: | UPPER MOUNT,VERTICAL CONVEYING GUIDE |
Парткод: | 36706811 |
Деталь: | UPPER REAR FRAME,VERTICAL CONVEYING |
Парткод: | 36706850 |
Деталь: | SPRING,FEED |
Парткод: | 66106610 |
Деталь: | RIGHT HANDLE, FEED RELEASE(K M) |
Парткод: | 68204180 |
Деталь: | DUCT FAN |
Парткод: | 78627520 |
Деталь: | LOWER COVER,VERTICAL CONVEYING |
Парткод: | 2CJ06080 |
Деталь: | SHAFT,FEED PULLEY |
Парткод: | 33906651 |
Деталь: | LOWER GUIDE,VERTICAL CONVEYING |
Парткод: | 36706740 |
Деталь: | LOWER MOUNT,VERTICAL CONVEYING GUIDE |
Парткод: | 36706820 |
Деталь: | LOWER REAR FRAME,VERTICAL CONVEYING |
Парткод: | 36706860 |
Деталь: | ROLLER,VERTICAL CONVEYING MIDDLE |
Парткод: | 2A006500 |
Деталь: | MINIATURE CLAMP,UAMS-05-2 |
Парткод: | M2105720 |
Деталь: | WIRE,VERTICAL CONVEYING |
Парткод: | 2AC27600 |
Деталь: | SWITCH,VERTICAL CONVEYING |
Парткод: | 33906140 |
Деталь: | MOUNT BASE,PAPER FEED SWITCH |
Парткод: | 33906620 |
Деталь: | LEFT GUIDE B,VERTICAL CONVEYING |
Парткод: | 36706190 |
Деталь: | CLUTCH,PAPER FEED |
Парткод: | 2AC06240 |
Деталь: | GUIDE,CONFLUENCE |
Парткод: | 33906700 |
Деталь: | LEFT GUIDE,FEED |
Парткод: | 33906780 |
Деталь: | BEARING,FEED |
Парткод: | 33906610 |
Деталь: | MOUNT,VERTICAL CONVEYING RELEASE SWITCH |
Парткод: | 36706790 |
Деталь: | INTERLOCK SWITCH B |
Парткод: | 61727540 |
Деталь: | ROLLER C,FEED |
Парткод: | 33906730 |
Деталь: | COVER,VERTICAL CONVEYING RELEASE SWITCH |
Парткод: | 36706831 |
Деталь: | STOPPER 5 |
Парткод: | 2BC06980 |
Деталь: | LOWER RIGHT STAY |
Парткод: | 68202140 |
Деталь: | ROLLER B,VERTICAL CONVEYING |
Парткод: | 36706260 |
Деталь: | DUCT,SEPARATION JOINT |
Парткод: | 2A007150 |
Деталь: | PIN,VERTICAL CONVEYING HOOK |
Парткод: | 36706840 |
Деталь: | PARTS,ASSY ENGINE OUTPUT PCB,SP (KM-6330) |
Парткод: | 2CJ93080 |
Деталь: | PARTSASSY ENGINE OUTPUT PCB, SP (KM-7530) |
Парткод: | 2FA93050 |
Деталь: | TERMINAL BASE,MAIN HIGH VOLTAGE |
Парткод: | 2A010050 |
Деталь: | JUNCTION WIRING,DEVELOPING BIAS |
Парткод: | 2A027600 |
Деталь: | TERMINAL,MAIN HIGH VOLTAGE |
Парткод: | 36710220 |
Деталь: | WIRE,MAIN HIGH VOLTAGE |
Парткод: | 36727361 |
Деталь: | WIRE,GRID |
Парткод: | 36727371 |
Деталь: | TERMINAL,GRID CATCHER |
Парткод: | 61710610 |
Деталь: | UPPER LEFT MOUNT,MAIN PCB |
Парткод: | 2CJ26060 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | MOUNT,EJECT COVER SW |
Парткод: | 36721070 |
Деталь: | COVER,EJECT SW |
Парткод: | 36721080 |
Деталь: | INTERLOCK SWITCH B |
Парткод: | 61727540 |
Деталь: | SWITCH,CASSETTE LIFT |
Парткод: | 66006350 |
Деталь: | EDGING,EDS-0607U(KITAGAWA) |
Парткод: | M2104260 |
Деталь: | TOTAL COUNTER ASSY |
Парткод: | 2AC01140 |
Деталь: | GROUND PLATE, CLEANING |
Парткод: | 72418400 |
Деталь: | PARTS BASSY JUNCTIONS P) (KM-6330) |
Парткод: | 2CJ93180 |
Деталь: | PARTSASSY JUNCTIONS (KM-7530) |
Парткод: | 2FA93060 |
Деталь: | BAND,RSG-100(KITAGAWA) |
Парткод: | M2107250 |
Деталь: | MOUNT,TOTAL COUNTER |
Парткод: | 2A026200 |
Деталь: | UPPER RIGHT MOUNT,MAIN PCB |
Парткод: | 2A026020 |
Деталь: | EDGING,EDS-2323U(KITAGAWA) |
Парткод: | M2104270 |
Деталь: | MOUNT,SAFETY SWITCH |
Парткод: | 36702231 |
Деталь: | FRONT MAGNETCOVER |
Парткод: | 2BC04530 |
Деталь: | SENSOR,HUMIDITY |
Парткод: | 2A327010 |
Деталь: | MOUNT,MAIN SWITCH |
Парткод: | 2A026150 |
Деталь: | MOUNT,MAIN SWITCH |
Парткод: | 36702221 |
Деталь: | SWITCH,MAIN |
Парткод: | 2BC27750 |
Деталь: | PARTS,ASSY MAIN PCB,SP (KM-6330) |
Парткод: | 2CJ93070 |
Деталь: | PARTSASSY MAIN PCB.SP (KM-7530) |
Парткод: | 2FA93040 |
Деталь: | BACKUP RAM,M48T35Y-70PC1 |
Парткод: | NAS09020 |
Деталь: | SPACER,KGLS-4S |
Парткод: | M2108120 |
Деталь: | CASE,BU02P-TR-PC-H(JST) |
Парткод: | J5016020 |
Деталь: | MINIATURE CLAMP,UAMS-07-0 |
Парткод: | M2105730 |
Деталь: | FAN COOLING(80-NMB) |
Парткод: | 2BL27630 |
Деталь: | UPPER LID,SHIELD |
Парткод: | 2CJ26020 |
Деталь: | LOWER LID,SHIELD |
Парткод: | 2CJ26030 |
Деталь: | COVER CF |
Парткод: | 2CJ04030 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | SPACER,KGLS-3S |
Парткод: | M2108000 |
Деталь: | MOUNT,HIGH VOLTAGE |
Парткод: | 2A026080 |
Деталь: | MAIN HIGH VOLTAGE PCB (KM-6330) |
Парткод: | 2A028080 |
Деталь: | MAIN HIGH VOLTAGE PCB (KM-7530) |
Парткод: | 2FA28050 |
Деталь: | SHIELD C, GASKET |
Парткод: | 2CJ27170 |
Деталь: | IC DIMM4 (KM-6330) |
Парткод: | 2BC27960 |
Деталь: | IC DIMM5 (KM-7530) |
Парткод: | 2CJ27150 |
Деталь: | FAN COOLING(80-15) (KM-7530) |
Парткод: | 2BL27610 |
Деталь: | CLAMP,GNK-3N(NIKKO) (KM-7530) |
Парткод: | M2505180 |
Деталь: | COVER.SAFETY SWITCH |
Парткод: | 2CJ02020 |
Деталь: | BYPASS TABLE ASSY(INCH) |
Парткод: | 2CJ00400 |
Деталь: | BYPASS TABLE ASSY(METRIC) |
Парткод: | 2CJ00390 |
Деталь: | ORIGINAL SIZE INDICATOR,BYPASS (INCH) |
Парткод: | 18505180 |
Деталь: | ORIGINAL SIZE INDICATOR,BYPASS(EUR) |
Парткод: | 2AC05160 |
Деталь: | UPPER TABLE,BYPASS |
Парткод: | 2CJ06090 |
Деталь: | INNER TABLE,BYPASS |
Парткод: | 2CJ06100 |
Деталь: | LOWER TABLE,BYPASS |
Парткод: | 2CJ06110 |
Деталь: | FRONT CURSOR,BYPASS |
Парткод: | 2CJ06120 |
Деталь: | REAR CURSOR.BYPASS |
Парткод: | 2CJ06130 |
Деталь: | STOPPER,BYPASS TABLE |
Парткод: | 33906880 |
Деталь: | SWITCH,BYPASS SIZE DETECTION |
Парткод: | 33906990 |
Деталь: | RACK.CURSOR |
Парткод: | 2BC06750 |
Деталь: | TERMINAL, PAPER SIZE DETECTION |
Парткод: | 2BC07860 |
Деталь: | SIZE DETECTION PCB |
Парткод: | 33928111 |
Деталь: | WIRE,BYPASS UNIT |
Парткод: | 36727380 |
Деталь: | SPRING,TRANSFER |
Парткод: | 63516110 |
Деталь: | GEAR 18,IDLE DEVELOPING |
Парткод: | 65914120 |
Деталь: | FRONT CURSOR.BYPASS SUB |
Парткод: | 2CJ07280 |
Деталь: | REAR CURSOR.BYPASS SUB |
Парткод: | 2CJ07290 |
Деталь: | EDGING.EDS-2 |
Парткод: | M2104210 |
Деталь: | MINIATURE CLAMP.UAMS-05-2 |
Парткод: | M2105720 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | SPRING.BYPASS LIFT |
Парткод: | 2A006150 |
Деталь: | STOPPER 5.RING |
Парткод: | 33906630 |
Деталь: | FRONT FRAME.BYPASS |
Парткод: | 36707010 |
Деталь: | REAR FRAME.BYPASS |
Парткод: | 36707020 |
Деталь: | UPPER GUIDE,BYPASS |
Парткод: | 36707030 |
Деталь: | LOWER GUIDE.BYPASS |
Парткод: | 36707040 |
Деталь: | ROLLER.SB LEADING FEED |
Парткод: | 36707050 |
Деталь: | UPPER SHAFT.SEPARATION |
Парткод: | 36707060 |
Деталь: | SHAFT.JOINT |
Парткод: | 36707070 |
Деталь: | BUSHING.BYPASS |
Парткод: | 36707080 |
Деталь: | MOUNT.PAPER EMPTY |
Парткод: | 36707090 |
Деталь: | ACTUATOR.EMPTY SWITCH |
Парткод: | 36707103 |
Деталь: | SHAFT, BYPASS LIMITER |
Парткод: | 36707110 |
Деталь: | STOPRING PAPER FEED PULLEY |
Парткод: | 75706040 |
Деталь: | SHAFT,BYPASS LIFT |
Парткод: | 36707131 |
Деталь: | LEVER.MOVING GUIDE |
Парткод: | 36707141 |
Деталь: | FRONT MOUNTBYPASS TABLE |
Парткод: | 2CJ07250 |
Деталь: | REAR MOUNT.BYPASS TABLE |
Парткод: | 36707210 |
Деталь: | BEARING 678ZZ |
Парткод: | G3006780 |
Деталь: | FILM,BYPASS |
Парткод: | 36707270 |
Деталь: | WIRE.BYPASS PAPER FEED |
Парткод: | 36727090 |
Деталь: | SPRING.BYPASS SWITCH BACK |
Парткод: | 61706470 |
Деталь: | UPPER PULLEY.BYPASS |
Парткод: | 61706770 |
Цена: | 1 900 ₽ |
Деталь: | LOWER PULLEY,BYPASS |
Парткод: | 61706780 |
Деталь: | SWITCH,FEED |
Парткод: | 63227020 |
Деталь: | TENSION PLATE FEED GUIDE |
Парткод: | 77607140 |
Деталь: | SPRING.TENSION PAPER FEED |
Парткод: | 65707510 |
Деталь: | SWITCH.CASSETTE LIFT |
Парткод: | 66006350 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | BUSHING 6.LOWER REGISTRATION ROLLER |
Парткод: | 72107160 |
Деталь: | IDLE GEAR 20 |
Парткод: | 72107280 |
Деталь: | SPRING,LIMITTER |
Парткод: | 72107531 |
Деталь: | BOSE,LIMITTER |
Парткод: | 72107710 |
Деталь: | ONE-WAY GEAR 20 |
Парткод: | 72107730 |
Деталь: | COLLAR, LIMITTER |
Парткод: | 72707190 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | JOINT.PULLEY DRIVE SHAFT |
Парткод: | 74306520 |
Деталь: | REGISTRATION GUIDE ASSY SP |
Парткод: | 2CJ68140 |
Деталь: | GUIDE.BYPASS LIFT |
Парткод: | 2CJ07260 |
Деталь: | PAD,BYPASS |
Парткод: | 36707260 |
Деталь: | SHEET, BYPASS |
Парткод: | 2A006250 |
Деталь: | FILMJBYPASS LIFT |
Парткод: | 2CJ07270 |
Деталь: | FILM.BYPASS |
Парткод: | 36707270 |
Деталь: | GUIDE,TURN OVER FEED SHIFT |
Парткод: | 2A017121 |
Деталь: | SUPPORT PLATE,GUIDE TURN OVER FEED SHIFT |
Парткод: | 2AC07120 |
Деталь: | SPRING,PAPER EJECT HOLDER |
Парткод: | 63213360 |
Деталь: | MOUNT B,FEED SHIFT SOLENOID |
Парткод: | 2A017030 |
Деталь: | MOUNT,REFEED PULLEY |
Парткод: | 2A017070 |
Деталь: | GUIDE,DUPLEX REFEED |
Парткод: | 2A017060 |
Деталь: | SPRING PLATE,PULLEY |
Парткод: | 66717100 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | SHAFT,REFEED PULLEY |
Парткод: | 2A017110 |
Деталь: | LEVER,SWITCHBACK RELEASE |
Парткод: | 2A017200 |
Деталь: | PULLEY,ARM LARGE |
Парткод: | 36808230 |
Деталь: | UPPER GUIDE,DUPLEX ADMISSION |
Парткод: | 2A017050 |
Деталь: | SWITCH,DUPLEX CONVEYING |
Парткод: | 2A027570 |
Деталь: | BUSHING 6,REGISTRATION ROLLER |
Парткод: | 72107760 |
Деталь: | BUSHING 6,LOWER REGISTRATION ROLLER |
Парткод: | 72107160 |
Деталь: | PRESSING SPRING,FEED BACK |
Парткод: | 29717150 |
Деталь: | MOUNT,SWITCHBACK RELEASE SOLENOID |
Парткод: | 2A017210 |
Деталь: | SHAFT,DUPLEX CONVEYING |
Парткод: | 2A017160 |
Деталь: | PULLEY 40,DUPLEX CONVEYING |
Парткод: | 68721630 |
Деталь: | GEAR 26,CLUTCH |
Парткод: | 45727303 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | SHAFT,DUPLEX CLUTCH |
Парткод: | 2A017180 |
Деталь: | GEAR 40,FEED |
Парткод: | 2AC22460 |
Деталь: | CLUTCH,PAPER FEED |
Парткод: | 2AC06240 |
Деталь: | BEARING,688ZZNR |
Парткод: | 28107400 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | MOUNT,SWITCHBACK DRIVE |
Парткод: | 2A017190 |
Деталь: | RIGHT GUIDE,MIDDLE TRAY |
Парткод: | 68721771 |
Деталь: | MAGNET,CARTRIDGE |
Парткод: | 65973030 |
Деталь: | RIGHT LABEL,MIDDLE TRAY RELEASE |
Парткод: | 68705040 |
Деталь: | SOLENOID,STOPPER |
Парткод: | 18327130 |
Деталь: | GEAR,DUPLEX JOINT |
Парткод: | 68721600 |
Деталь: | STOPPER 7,CARTRIDGE |
Парткод: | 33973300 |
Деталь: | GUIDE,MIDDLE TRAY |
Парткод: | 2A017040 |
Деталь: | PAPER CONVEYING PULLEY |
Парткод: | 74716140 |
Деталь: | SHAFT FEEDBACK PULLEY |
Парткод: | 78621570 |
Деталь: | FILM,DUPLEX REFEED |
Парткод: | 2BC21540 |
Деталь: | WIRE,MAIN (KM-7530) |
Парткод: | 2FA27030 |
Деталь: | CORE 11-25X14 (KM-7530) |
Парткод: | 2A627930 |
Деталь: | CORE 10-20X10 (KM-7530) |
Парткод: | 2A627940 |
Деталь: | SET PARTS KEYCOUNTER NEW COLOR |
Парткод: | 2A369703 |
Деталь: | SOCKET ASSY,KEY COUNTER |
Парткод: | 41529210 |
Деталь: | PLUG EL 4P |
Парткод: | 41529105 |
Деталь: | SOCKET,KEY COUNTER |
Парткод: | 41525016 |
Деталь: | RETAINER,KEY COUNTER COVER |
Парткод: | 66060022 |
Деталь: | RETAINER,KEY COUNTER |
Парткод: | 66060030 |
Деталь: | MOUNT,KEY COUNTER |
Парткод: | 66060040 |
Деталь: | COUNTER-SUNK HEAD SCREW BFHM3X6 (BLACK) |
Парткод: | B2303060 |
Деталь: | BINDING SCREW BVM4X30 (BLACK) |
Парткод: | B1304300 |
Деталь: | TRIPLE SCREW M4X6 (BLACK) |
Парткод: | B4304060 |
Деталь: | TRIPLE SCREW M4X10 (BLACK) |
Парткод: | B4304100 |
Деталь: | BINDING SCREW BVM3X8 (BLACK) |
Парткод: | B1303080 |
Деталь: | TRIPLE SCREW M4X6(CHROMIUM) |
Парткод: | B4104060 |
Деталь: | TRIPLE SCREW M4X20(BLACK) |
Парткод: | B4304200 |
Деталь: | NUT BNM3 (BLACK) |
Парткод: | C2303000 |
Деталь: | COVER,KEY COUNTER |
Парткод: | 2A360010 |
Деталь: | KEY COUNTER |
Парткод: | 82142540 |
Деталь: | ORIGINAL TRAY ASSY |
Парткод: | 2A000710 |
Деталь: | REINFORCEMENT,EJECT TRAY |
Парткод: | 18312520 |
Деталь: | TRAY,ORIGINAL |
Парткод: | 2A004300 |
Деталь: | MOUNT,ORIGINAL TRAY |
Парткод: | 2A004100 |
Деталь: | PIN,ORIGINAL TRAY |
Парткод: | 2A004130 |
Деталь: | LABEL OFF(EUR) |
Парткод: | 2A060090 |
Деталь: | HEATER,CASSETTE |
Парткод: | 2A027560 |
Деталь: | SPACER,KGLS-10S |
Парткод: | M2108190 |
Деталь: | SPACER,WLS-04-0 |
Парткод: | M2108370 |
Деталь: | MAIN CHARGERASSY (KM-6330) |
Парткод: | 2CJ00170 |
Деталь: | MAIN CHARGER ASSY (KM-7530) |
Парткод: | 2FA00150 |
Деталь: | BASE,MAIN CHARGER |
Парткод: | 2A010011 |
Деталь: | GRID ASSY |
Парткод: | 2A068171 |
Деталь: | INNER SHIELD,MC |
Парткод: | 2A010030 |
Деталь: | SHEET, DUCT |
Парткод: | 2A010040 |
Деталь: | SPIRAL,CHARGER CLEANING |
Парткод: | 2A010081 |
Деталь: | LABEL, UNIT REPLACEMENT |
Парткод: | 2BC05150 |
Деталь: | REAR HOUSING, MC (KM-7530) |
Парткод: | 2FA10010 |
Деталь: | REAR HOUSING,MC (KM-6330) |
Парткод: | 36710050 |
Деталь: | PIN CHARGER |
Парткод: | 33910230 |
Деталь: | TERMINAL,MAIN CHARGER |
Парткод: | 36710100 |
Деталь: | WIRE,MAIN CHARGER |
Парткод: | 2AR10160 |
Деталь: | MC CLEANING PAD ASSY (KM-6330) |
Парткод: | 2A068220 |
Деталь: | MC CLEANING PAD ASSY (KM-7530) |
Парткод: | 2FA68120 |
Деталь: | PULLEY, MAIN CHARGER ADJUSTMENT |
Парткод: | 2A010140 |
Деталь: | MOVING BASE,MAIN CHARGER ADJUSTMENT |
Парткод: | 2A010151 |
Деталь: | UNIT,CLEANING MOTOR |
Парткод: | 2A027780 |
Деталь: | SPRING,CHARGER |
Парткод: | 48527200 |
Деталь: | LAMP,CLEANING LAMP |
Парткод: | 36908040 |
Деталь: | SPRING,TRANSFER ELECTRODE |
Парткод: | 36716670 |
Деталь: | WORK PLATE,CLEANING SLIDER |
Парткод: | 33917211 |
Деталь: | FRONT HOUSING,MC |
Парткод: | 36710041 |
Деталь: | CHARGER CLEANING SLIDER ASSY |
Парткод: | 36768071 |
Деталь: | GRID CLEANING PAD ASSY |
Парткод: | 36768081 |
Деталь: | INSULATING PLATE,CLEANING LAMP |
Парткод: | 36710230 |
Деталь: | RETAINING PIN,MAIN CHARGER |
Парткод: | 36710271 |
Деталь: | SHAFT, DRUM |
Парткод: | 36708470 |
Деталь: | HEATER,DRUM |
Парткод: | 2A060080 |
Деталь: | FRONT RETAINER,DRUM |
Парткод: | 2A008310 |
Деталь: | FRONT FLANGE,DRUM |
Парткод: | 36708020 |
Деталь: | SPRING,FLANGE |
Парткод: | 36708070 |
Деталь: | ELECTRODE B,DRUM HEATER |
Парткод: | 36708190 |
Деталь: | TERMINAL BASE B,DRUM HEATER |
Парткод: | 36708390 |
Деталь: | SET,DRUM FOR 6230 |
Парткод: | 2A082010 |
Деталь: | REAR RETAINER,DRUM |
Парткод: | 2A008300 |
Деталь: | GROUND PLATE A,DRUM |
Парткод: | 36708480 |
Деталь: | JUNCTION WIRING,DRUM FLANGE |
Парткод: | 36727191 |
Деталь: | GROUND PLATE B,DRUM |
Парткод: | 36708491 |
Деталь: | EDGING,EDS-2 |
Парткод: | M2104210 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | REAR FLANGE,DRUM |
Парткод: | 2CJ08010 |
Деталь: | ELECTRODE A,DRUM HEATER |
Парткод: | 36708040 |
Деталь: | GROUND PLATE,STAY DRUM |
Парткод: | 36708090 |
Деталь: | TERMINAL BASE A,DRUM HEATER |
Парткод: | 36708380 |
Деталь: | TERMINAL BASE C,DRUM HEATER |
Парткод: | 36708400 |
Деталь: | TERMINAL BASE D,DRUM HEATER |
Парткод: | 36708410 |
Деталь: | MOUNT,DRUM |
Парткод: | 36708460 |
Деталь: | JUNCTION ASSY A |
Парткод: | 2CJ01060 |
Деталь: | WIRING,INLET N |
Парткод: | 2AC27830 |
Деталь: | WIRING,INLET L |
Парткод: | 2AC27840 |
Деталь: | PLATE SPRING,OPERATION UNIT PCB |
Парткод: | 18512731 |
Деталь: | WIRE GND,FINISHER |
Парткод: | 2BC27640 |
Деталь: | WIRE FG,FINISHER |
Парткод: | 2AC27880 |
Деталь: | REAR MOUNT B,COVER |
Парткод: | 2A004011 |
Деталь: | JUNCTION WIRING L,DECK |
Парткод: | 2CJ27120 |
Деталь: | LOWER LEFT MOUNT, MAIN PCB |
Парткод: | 2CJ26070 |
Деталь: | RELAY 4P,POWER |
Парткод: | 34027070 |
Деталь: | MOUNT BASE,POWER RELAY |
Парткод: | 34027120 |
Деталь: | MOUNT,INLET |
Парткод: | 2A026240 |
Деталь: | MOUNT, INLET |
Парткод: | 36726010 |
Деталь: | MOUNT,PAPER SIZE DETECTION |
Парткод: | 36906390 |
Деталь: | ROUND TYPE TERMINAL,173638-1 |
Парткод: | L0023080 |
Деталь: | NOISE FILTER(200) |
Парткод: | 2A027670 |
Деталь: | LOWER RIGHT MOUNT,MAIN PCB |
Парткод: | 2CJ26080 |
Деталь: | MOUNT,POWER SOURCE |
Парткод: | 2A026011 |
Деталь: | LOCKING WIRE SADDLE,LWS-8S-2.5W |
Парткод: | M2109210 |
Деталь: | SWITCH,COVER OPEN |
Парткод: | 66127010 |
Деталь: | EDGING EDS-1 |
Парткод: | M2104200 |
Деталь: | EDGING,EDS-2323U(KITAGAWA) |
Парткод: | M2104270 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | WIRE SADDLE,WS-2WS |
Парткод: | M2109020 |
Деталь: | WIRE SADDLE,LWS-5S-2W(KITAGAWA) |
Парткод: | M2109270 |
Деталь: | SHIELD,MAIN PCB |
Парткод: | 2CJ26010 |
Деталь: | MOUNT,SORTER CONNECTOR |
Парткод: | 2CJ26050 |
Деталь: | LID,VENDOR |
Парткод: | 36726140 |
Деталь: | LID FINISHER CABLE |
Парткод: | 77502090 |
Деталь: | MOUNT,INTERFACE |
Парткод: | 2CJ26040 |
Деталь: | STAY, SHIELD |
Парткод: | 2CJ26090 |
Деталь: | GUIDE CF CARD |
Парткод: | 2BM26020 |
Деталь: | EDGING,EDS-1717U |
Парткод: | M2104220 |
Деталь: | SPACER,KGLS-3S |
Парткод: | M2108000 |
Деталь: | SPACER,KGLS-8RT(KITAGAWA) |
Парткод: | M2108930 |
Деталь: | SPACER,KGPS-6RF(KITAGAWA) |
Парткод: | M2108670 |
Деталь: | WIRE S-BOX (KM-6330) |
Парткод: | 2CJ27020 |
Деталь: | WIRE,S-BOX (KM-7530) |
Парткод: | 2FA27040 |
Деталь: | BAND,RSG-100(KITAGAWA) |
Парткод: | M2107250 |
Деталь: | MOUNT,CCD JUNCTION WIRING |
Парткод: | 2A026130 |
Деталь: | LID,CCD JUNCTION WIRING |
Парткод: | 2A026140 |
Деталь: | LID,CONTROLLER |
Парткод: | 2BC26070 |
Деталь: | LID,INTERFACE |
Парткод: | 2BC04230 |
Деталь: | MOUNT,HDD |
Парткод: | 2BC26270 |
Деталь: | GROUND PLATE,HDD |
Парткод: | 2BC26280 |
Деталь: | JUNCTION WIRING,CCD |
Парткод: | 2CJ27080 |
Деталь: | WIRE LCF |
Парткод: | 2CJ27061 |
Деталь: | PARTSUNIT HDD(S P) |
Парткод: | 2FA93130 |
Деталь: | POWER SOURCE PCB 200 (KM-7530) |
Парткод: | 2FA28070 |
Деталь: | POWER SOURCE PCB 200 |
Парткод: | 2A028072 |
Деталь: | POWER CORD 220 (KM-6330) |
Парткод: | 18527460 |
Деталь: | POWER CORD(230) (KM-7530) |
Парткод: | 2AR27800 |
Деталь: | GROUND PLATE A,NOISE |
Парткод: | 18526211 |
Деталь: | GROUND PLATE,LCD |
Парткод: | 18526340 |
Деталь: | BINDING BAND,PLT1M |
Парткод: | M2607010 |
Деталь: | POWER CODE AS(240) |
Парткод: | 29927231 |
Деталь: | EDGING,EDS-2 |
Парткод: | M2104210 |
Деталь: | SPACER,KGLS-6S (KM-7530) |
Парткод: | M2108140 |
Деталь: | SUPPORT PLATE,POWER SOURCE MOUNT |
Парткод: | 36726020 |
Деталь: | MOUNT,WIRE MAIN |
Парткод: | 36726051 |
Деталь: | JUNCTION WIRING,PAPER FEED UNIT |
Парткод: | 36727300 |
Деталь: | V-RING 6 DIA |
Парткод: | 72114870 |
Деталь: | PIN,CONNECTOR |
Парткод: | 74327180 |
Деталь: | LID,NIC |
Парткод: | 2A626120 |
Деталь: | SPACER,KGLS-4S |
Парткод: | M2108120 |
Деталь: | SPACER,KGPS-4S |
Парткод: | M2108130 |
Деталь: | CLAMP,GNK-4N(NIKKO) |
Парткод: | M2505190 |
Деталь: | CLAMP,GNK-2N(NIKKO) |
Парткод: | M2505170 |
Деталь: | SHIELD A,GASKET |
Парткод: | 2CJ27130 |
Деталь: | GROUNDPLATEVERTICAL CONVEYING |
Парткод: | 2BC07820 |
Деталь: | CORE 15-26X13 |
Парткод: | 2AV27440 |
Деталь: | CORE 11-25X14 |
Парткод: | 2A627930 |
Деталь: | REAR SEAL.COVER |
Парткод: | 2CJ26110 |
Деталь: | SEAL,PIPE FRAME |
Парткод: | 2CJ26120 |
Деталь: | COIL.POWER SOURCE REACTOR(230) (KM-7530) |
Парткод: | 2FA27160 |
Деталь: | LEVER,SENSOR PE |
Парткод: | 2A007350 |
Деталь: | FUSE,MT4(SOC) |
Парткод: | M5558010 |
Деталь: | FUSE,UL-TSC-8A-N1(S.O.C) |
Парткод: | M5558000 |
Деталь: | FUSE,218004(LITTLE-FUSE) |
Парткод: | M1654030 |
Деталь: | PARTS AASSY JUNCTIONS P) |
Парткод: | 2CJ93170 |
Деталь: | MOUNT,POWER CORD (120) |
Парткод: | 36726120 |
Деталь: | BUSHING,USR-40 |
Парткод: | M1203520 |
Деталь: | MOUNT,PAPER SIZE DETECTION |
Парткод: | 36906390 |
Деталь: | WIRE GND,FINISHER |
Парткод: | 2BC27640 |
Деталь: | WIRE FG,FINISHER |
Парткод: | 2AC27880 |
Деталь: | REAR MOUNT B,COVER |
Парткод: | 2A004011 |
Деталь: | JUNCTION WIRING L,DECK |
Парткод: | 2CJ27120 |
Деталь: | LOWER LEFT MOUNT, MAIN PCB |
Парткод: | 2CJ26070 |
Деталь: | RELAY 4P,POWER |
Парткод: | 34027070 |
Деталь: | MOUNT BASE,POWER RELAY |
Парткод: | 34027120 |
Деталь: | POWER CORD ASSY (120) |
Парткод: | 36701160 |
Деталь: | LOWER RIGHT MOUNT,MAIN PCB |
Парткод: | 2CJ26080 |
Деталь: | MOUNT,POWER SOURCE |
Парткод: | 2A026010 |
Деталь: | LOCKING WIRE SADDLE,LWS-8S-2.5W |
Парткод: | M2109210 |
Деталь: | WIRE SADDLE,LWS-5S-2W(KITAGAWA) |
Парткод: | M2109270 |
Деталь: | MOUNT,HDD |
Парткод: | 2BC26270 |
Деталь: | GROUND PLATE,HDD |
Парткод: | 2BC26280 |
Деталь: | SWITCH,COVER OPEN |
Парткод: | 66127010 |
Деталь: | EDGING EDS-1 |
Парткод: | M2104200 |
Деталь: | EDGING,EDS-2323U(KITAGAWA) |
Парткод: | M2104270 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | WIRE SADDLE,WS-2WS |
Парткод: | M2109020 |
Деталь: | SHIELD,MAIN PCB |
Парткод: | 2CJ26010 |
Деталь: | MOUNT,SORTER CONNECTOR |
Парткод: | 2CJ26050 |
Деталь: | LID,VENDOR |
Парткод: | 36726140 |
Деталь: | LID FINISHER CABLE |
Парткод: | 77502090 |
Деталь: | MOUNT,INTERFACE |
Парткод: | 2CJ26040 |
Деталь: | STAY, SHIELD |
Парткод: | 2CJ26090 |
Деталь: | GUIDE CF CARD |
Парткод: | 2BM26020 |
Деталь: | EDGING,EDS-1717U |
Парткод: | M2104220 |
Деталь: | SPACER,KGLS-3S |
Парткод: | M2108000 |
Деталь: | SPACER,KGLS-8RT(KITAGAWA) |
Парткод: | M2108930 |
Деталь: | SPACER,KGPS-6RF(KITAGAWA) |
Парткод: | M2108670 |
Деталь: | WIRE S-BOX (KM-6330) |
Парткод: | 2CJ27020 |
Деталь: | WIRE,S-BOX (KM-7530) |
Парткод: | 2FA27040 |
Деталь: | BAND,RSG-100(KITAGAWA) |
Парткод: | M2107250 |
Деталь: | LID,INTERFACE |
Парткод: | 2BC04230 |
Деталь: | LID,CONTROLLER |
Парткод: | 2BC26070 |
Деталь: | LID,CCD JUNCTION WIRING |
Парткод: | 2A026140 |
Деталь: | PARTSJJNIT HDD(S P) |
Парткод: | 2FA93130 |
Деталь: | EDGING,EDS-2 |
Парткод: | M2104210 |
Деталь: | WIRE LCF |
Парткод: | 2CJ27061 |
Деталь: | CONJUNCTION WIRING (KM-7530) |
Парткод: | 2FA27110 |
Деталь: | JUNCTION WIRING,CCD |
Парткод: | 2CJ27080 |
Деталь: | POWER SOURCE PCB 120 (KM-6330) |
Парткод: | 2A028122 |
Деталь: | POWER SOURCE PCB 120 (KM-7530) |
Парткод: | 2FA28100 |
Деталь: | CLAMP,GNK-4N(NIKKO) |
Парткод: | M2505190 |
Деталь: | RETAINING PIN,DRAWER |
Парткод: | 33927450 |
Деталь: | SUPPORT PLATE,POWER SOURCE MOUNT |
Парткод: | 36726020 |
Деталь: | PLATE SPRING, OPERATION UNIT PCB (KM-7530) |
Парткод: | 18512731 |
Деталь: | MOUNT,WIRE MAIN |
Парткод: | 36726051 |
Деталь: | JUNCTION WIRING,PAPER FEED UNIT |
Парткод: | 36727300 |
Деталь: | V-RING 6 DIA |
Парткод: | 72114870 |
Деталь: | PIN,CONNECTOR |
Парткод: | 74327180 |
Деталь: | RECEPTACLE,QR/P15-8S-C(02)(HIROSE) |
Парткод: | J0464080 |
Деталь: | BINDING BAND,PLT1M |
Парткод: | M2607010 |
Деталь: | MOUNT,CCD JUNCTION WIRING |
Парткод: | 2A026130 |
Деталь: | LID,NIC |
Парткод: | 2A626120 |
Деталь: | SPACER,KGLS-4S |
Парткод: | M2108120 |
Деталь: | SPACER,KGPS-4S |
Парткод: | M2108130 |
Деталь: | CLAMP,GNK-2N(NIKKO) |
Парткод: | M2505170 |
Деталь: | SHIELD A,GASKET |
Парткод: | 2CJ27130 |
Деталь: | REAR SEALCOVER |
Парткод: | 2CJ26110 |
Деталь: | SEAL,PIPE FRAME |
Парткод: | 2CJ26120 |
Деталь: | CORE 11-25X14 (KM-7530) |
Парткод: | 2A627930 |
Деталь: | CORE, 13-30X34 (KM-7530) |
Парткод: | 61727600 |
Деталь: | POWER SOURCE PCB 120 (KM-7530) |
Парткод: | 2FA28080 |
Деталь: | SPACER,KGLS-6S (KM-7530) |
Парткод: | M2108140 |
Деталь: | LEVER,SENSOR PE |
Парткод: | 2A007350 |
Деталь: | GROUND PLATE, VERTICAL CONVEYING (KM-7530) |
Парткод: | 2BC07820 |
Деталь: | FUSE 15A,314015 |
Парткод: | M1661000 |
Деталь: | FUSE,UL-TSC-8A-N1(S.O.C) |
Парткод: | M5558000 |
Деталь: | FUSE,TSC-AC125V-4A(SOC) |
Парткод: | M5554030 |
Деталь: | UPPER ROLLER,VERTICAL CONVEYING |
Парткод: | 2A006510 |
Деталь: | LOWER SPRING,PAPER FEED |
Парткод: | 2A006140 |
Деталь: | GEAR,TONER FEED ROLLER |
Парткод: | 45727501 |
Деталь: | UPPER HOUSING,PAPER FEED |
Парткод: | 33906012 |
Деталь: | LOWER HOUSING,PAPER FEED |
Парткод: | 33906030 |
Деталь: | SUPPORT PLATE,LEADING FEED PULLEY |
Парткод: | 33906040 |
Деталь: | LOWER PAPER FEED SHAFT ASSY |
Парткод: | 33968191 |
Деталь: | LOWER PULLEY, PAPER FEED |
Парткод: | 33906060 |
Деталь: | SHAFT, LEADING FEED PULLEY |
Парткод: | 33906080 |
Деталь: | LOWER LEVER,PAPER FEED PULLEY RELEASE |
Парткод: | 33906090 |
Деталь: | REINFORCEMENT,PAPER FEED HOUSING |
Парткод: | 33906100 |
Деталь: | CLUTCH,PAPER FEED |
Парткод: | 33906110 |
Деталь: | ACTUATOR,PAPER EMPTY |
Парткод: | 33906150 |
Деталь: | GEAR 16,PAPER FEED |
Парткод: | 33906160 |
Деталь: | VIBRATION INSULATOR,RELEASE LEVER |
Парткод: | 33906211 |
Деталь: | UPPER REINFORCEMENT,HOUSING PAPER FEED |
Парткод: | 33906291 |
Деталь: | STOPPER 5,RING |
Парткод: | 33906630 |
Деталь: | WIRE,PAPER FEED UNIT |
Парткод: | 33927160 |
Деталь: | WEIGHTLEADING FEED PULLEY |
Парткод: | 36706220 |
Деталь: | PULLEYPAPER FEED |
Парткод: | 36706290 |
Деталь: | SHAFT, PAPER FEED |
Парткод: | 36706300 |
Деталь: | BUSHING,PAPER FEED |
Парткод: | 36706310 |
Деталь: | TORQUE LIMITER,PAPER FEED |
Парткод: | 36706900 |
Деталь: | PULLEYPICK-UP |
Парткод: | 60906161 |
Деталь: | BUSHING,BYPASS SHAFT |
Парткод: | 60907880 |
Деталь: | STOP RING,4 |
Парткод: | 63511220 |
Деталь: | BUSHING,6 |
Парткод: | 63806290 |
Деталь: | SWITCH,CASSETTE LIFT |
Парткод: | 66006350 |
Деталь: | GEAR 14,MAGNET ROLLER |
Парткод: | 66014120 |
Деталь: | GEAR,21 DEVELOPING |
Парткод: | 66022190 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | IDLE GEAR 18,SUB UNIT |
Парткод: | 71815110 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | GEAR16 ORIGINAL FEEDBACK |
Парткод: | 75207370 |
Деталь: | STATIC BRUSH FRONT TRANSFER |
Парткод: | 75817010 |
Деталь: | GEAR 16T |
Парткод: | 29806490 |
Деталь: | MINIATURE CLAMP,UAMS-05-2 |
Парткод: | M2105720 |
Деталь: | WIRE,VERTICAL CONVEYING |
Парткод: | 2AC27600 |
Деталь: | SWITCH,VERTICAL CONVEYING |
Парткод: | 33906140 |
Деталь: | MOUNT BASE,PAPER FEED SWITCH |
Парткод: | 33906620 |
Деталь: | LEFT GUIDE,VERTICAL CONVEYING |
Парткод: | 36706400 |
Деталь: | RIGHT GUIDE FILM,DUPLEX |
Парткод: | 2A017220 |
Деталь: | CLUTCH,PAPER FEED |
Парткод: | 2AC06240 |
Деталь: | BEARING,FEED |
Парткод: | 33906610 |
Деталь: | STOPPER 5 |
Парткод: | 2BC06980 |
Деталь: | UPPER GUIDE,DUPLEX FEED |
Парткод: | 36706271 |
Деталь: | LOWER GUIDE,DUPLEX FEED |
Парткод: | 36706280 |
Деталь: | FILM,CONFLUENCE GUIDE |
Парткод: | 36706880 |
Деталь: | LABEL, UNIT REPLACEMENT |
Парткод: | 2CJ05080 |
Деталь: | DUCT,COOLING |
Парткод: | 34823010 |
Деталь: | SPRING,CLEANING |
Парткод: | 2AC18300 |
Деталь: | MOUNT,FIXING CLEANING DRIVE |
Парткод: | 2A022310 |
Деталь: | SHAFTFIXING CLEANING DRIVE |
Парткод: | 2A022330 |
Деталь: | LEVER,FIXING CLEANING DRIVE |
Парткод: | 2A022340 |
Деталь: | SUPPORT PLATE.FIXING CLEANING DRIVE |
Парткод: | 2A022350 |
Деталь: | COUPLER A,FIXING CLEANING DRIVE |
Парткод: | 2A022360 |
Деталь: | COUPLER B,FIXING CLEANING DRIVE |
Парткод: | 2A022370 |
Деталь: | SOLENOID,BYPASS |
Парткод: | 33906370 |
Деталь: | FRONT BUSHING,DRUM SHAFT |
Парткод: | 34909030 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | GEAR 19,SPIRAL ROLLER |
Парткод: | 66018160 |
Деталь: | BUSHING,BYPASS CAM |
Парткод: | 66222140 |
Деталь: | SPRING,FIXING CLEANING |
Парткод: | 2A022390 |
Деталь: | GEAR 44,DUPLEX |
Парткод: | 74322310 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | CAM,MOVING GUIDE |
Парткод: | 36707220 |
Деталь: | SHAFT, DRUM DRIVE |
Парткод: | 2CJ22150 |
Деталь: | PLATE SPRING,DRUM GROUND |
Парткод: | 2A022050 |
Деталь: | BUSHING,DRUM DRIVE |
Парткод: | 49029408 |
Деталь: | GEAR 60/54,DRUM |
Парткод: | 36722320 |
Деталь: | HOLDER,DRUM DRIVE |
Парткод: | 36722700 |
Деталь: | RETAINER,DRUM DRIVE |
Парткод: | 36722710 |
Деталь: | SPRING DRUM DRIVE COUPLER |
Парткод: | 74722290 |
Деталь: | COUPLER,DRUM DRIVE |
Парткод: | 2CJ22160 |
Деталь: | BUSHING A,DRUM DRIVE |
Парткод: | 2CJ22170 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | BUSHING CLEANING UNIT |
Парткод: | 74718091 |
Деталь: | JOINT SPRING UPPER PF PULLEY SHAFT |
Парткод: | 74706580 |
Деталь: | GEAR,FIXING EJECT JOINT |
Парткод: | 36720390 |
Деталь: | REINFORCEMENT FIXING EJECT JOINT |
Парткод: | 36720420 |
Деталь: | FAN,FIXING |
Парткод: | 2BC27780 |
Деталь: | GEAR 26,CLUTCH |
Парткод: | 45727303 |
Деталь: | SHAFT, BYPASS CAM |
Парткод: | 36722410 |
Деталь: | FILTER,COOLING |
Парткод: | 2A023060 |
Деталь: | RETAINER,FLYWHEEL |
Парткод: | 2A022080 |
Деталь: | FLYWHEEL A |
Парткод: | 2BC22600 |
Деталь: | FLYWHEEL B |
Парткод: | 2BC22610 |
Деталь: | JUNCTION DUCT ASSY |
Парткод: | 2CJ00140 |
Деталь: | DUCT 80,COOLING |
Парткод: | 18523030 |
Деталь: | DUCT,JUNCTION |
Парткод: | 2A023020 |
Деталь: | FILM 80,FAN (KM-6330) |
Парткод: | 2A023040 |
Деталь: | SPONGE 80, FAN (KM-7530) |
Парткод: | 2FA23010 |
Деталь: | SPONGE,JUNCTION DUCT |
Парткод: | 2A023110 |
Деталь: | SPONGE,COOLING FAN |
Парткод: | 2A023080 |
Деталь: | DUCT,CHARGE |
Парткод: | 2A023010 |
Деталь: | FILM 60,FAN |
Парткод: | 2A023050 |
Деталь: | SPONGE,CHARGE DUCT (KM-6330) |
Парткод: | 2A023090 |
Деталь: | SPONGE, CHARGE DUCT (KM-7530) |
Парткод: | 2FA10030 |
Деталь: | FAN,COOLING |
Парткод: | 2BC27790 |
Деталь: | RETAINER,BYPASS CAM |
Парткод: | 36722530 |
Деталь: | DUCT, COOLING |
Парткод: | 34823010 |
Деталь: | PIN,CONVEYING IDLE |
Парткод: | 36723520 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | PARTS CLUTCH PRESSURE(SP) |
Парткод: | 36593510 |
Деталь: | CAM,TRANSFER BELT |
Парткод: | 36722130 |
Деталь: | SHAFT,TRANSFER BELT CLUTCH |
Парткод: | 36722441 |
Деталь: | MOUNT,CUTTER PI |
Парткод: | 36722611 |
Деталь: | MOUNT A,TRANSFER BELT CLUTCH |
Парткод: | 36722620 |
Деталь: | LIGHT SHIELD,PI |
Парткод: | 36722720 |
Деталь: | SWITCH,CASSETTE LIFT |
Парткод: | 66006350 |
Деталь: | EDGING,EDS-0607U(KITAGAWA) |
Парткод: | M2104260 |
Деталь: | COVER,DUPLEX UNIT |
Парткод: | 2CJ04260 |
Деталь: | LEFT GUIDE,DUPLEX CONVEYING |
Парткод: | 2AC07231 |
Деталь: | PRESSING PLATE,DUPLEX REGISTRATION |
Парткод: | 68721220 |
Деталь: | SPRING CIS |
Парткод: | 78112040 |
Деталь: | RETAINER,DUPLEX REGISTRATION |
Парткод: | 68721210 |
Деталь: | RETAINING PIN,CONVEYING |
Парткод: | 68721780 |
Деталь: | FRONT FRAME,DUPLEX |
Парткод: | 2A017010 |
Деталь: | UPPER GUIDE,DUPLEX CONVEYING |
Парткод: | 2A017140 |
Деталь: | REAR FRAME,DUPLEX |
Парткод: | 2A017020 |
Деталь: | RIGHT GUIDE,DUPLEX CONVEYING |
Парткод: | 2AC07220 |
Деталь: | LEFT SUPPORT PLATE,DUPLEX UNIT |
Парткод: | 2AC07321 |
Деталь: | RIGHT SUPPORT PLATE,DUPLEX UNIT |
Парткод: | 2AC07330 |
Деталь: | SWITCH,DUPLEX CONVEYING |
Парткод: | 68727030 |
Деталь: | EDGING,EDS-17L(KITAGAWA) |
Парткод: | M2104250 |
Деталь: | EDGING,EDS-2 |
Парткод: | M2104210 |
Деталь: | EDGING,EDS-0607U(KITAGAWA) |
Парткод: | M2104260 |
Деталь: | WIRE,DUPLEX UNIT |
Парткод: | 2A027400 |
Деталь: | PIN B,DISPOSAL TANK FULCRUM |
Парткод: | 72518060 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | PIN,DUPLEX CONVEYING FULCRUM |
Парткод: | 68721740 |
Деталь: | BINDING BAND,PLT1M |
Парткод: | M2607010 |
Деталь: | GROUND PLATE,DUPLEX |
Парткод: | 68721840 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | AUXILIARY PLATE,DUPLEX POSITION |
Парткод: | 2A017230 |
Деталь: | BUSING, PAPER FEED |
Парткод: | 28801300 |
Деталь: | LOWER ROLLER,DUPLEX REGISTRATION |
Парткод: | 68721080 |
Деталь: | SLIDER,CASSETTE |
Парткод: | 66107084 |
Деталь: | MOUNT,RAIL DUPLEX |
Парткод: | 2AC02110 |
Деталь: | LABEL,DUPLEX UNIT |
Парткод: | 36705050 |
Деталь: | LABEL,DUPLEX UNIT(EUR) |
Парткод: | 2A005100 |
Деталь: | RIGHT REINFORCEMENT |
Парткод: | 33902060 |
Деталь: | RIGHT MOUNT,RAIL |
Парткод: | 36707881 |
Деталь: | SET,DEVELOPING UNIT,ASSY (KM-6330) |
Парткод: | 2CJ83120 |
Деталь: | PARTS,DEVELOPING UNIT,ASSY, SP (KM-7530) |
Парткод: | 2FA93170 |
Деталь: | BINDINGBAND, PLT1M |
Парткод: | M2607010 |
Деталь: | DEVELOPING BLADE ASSY |
Парткод: | 2A000220 |
Деталь: | LOWER STAY,DEVELOPING ROLLER |
Парткод: | 2A014190 |
Деталь: | LOWER SPONGE,DEVELOPING BLADE |
Парткод: | 2A014610 |
Деталь: | SPONGE,LOWER DEV. STAY |
Парткод: | 36714660 |
Деталь: | HOLDER,LOWER DEV. ROLLER |
Парткод: | 61714240 |
Деталь: | HOLDER PLATE,LOWER DEV.ROLLER |
Парткод: | 61714250 |
Деталь: | FILM,DEV.BLADE REINFORCEMENT |
Парткод: | 61714320 |
Деталь: | SHAFT DEVELOPING ASSY |
Парткод: | 36768190 |
Деталь: | LABEL BJJNIT REPLACEMENT |
Парткод: | 2BC05270 |
Деталь: | UPPER MOJNT,SHIELD |
Парткод: | 2A014310 |
Деталь: | TONER SENSOR |
Парткод: | 33914190 |
Деталь: | SPONGE B,TONER SUPPLY CASE |
Парткод: | 36715740 |
Деталь: | BUSHING 6 |
Парткод: | 29806560 |
Деталь: | BUSHING 6-19,DEV. UNIT |
Парткод: | 49028113 |
Деталь: | BUSHING 6,CLEANING UNIT |
Парткод: | 49028116 |
Деталь: | CASE,TONER SUPPLY |
Парткод: | 36715030 |
Деталь: | SPIRAL,TONER SUPPLY |
Парткод: | 36715040 |
Деталь: | JOINT,HOPPER |
Парткод: | 36715110 |
Деталь: | SPONGE,TONER SUPPLY CASE |
Парткод: | 36715190 |
Деталь: | BUSHING,PAPER FEED |
Парткод: | 36706310 |
Деталь: | COVER,DEVELOPING |
Парткод: | 36714270 |
Деталь: | SPONGE L,DEVELOPING COVER |
Парткод: | 36714410 |
Деталь: | SPONGE S,DEVELOPING COVER |
Парткод: | 36714420 |
Деталь: | SHAFT,TONER SUPPLY DRIVE |
Парткод: | 36715020 |
Деталь: | UPPER SPONGE,DEVELOPING COVER |
Парткод: | 36715150 |
Деталь: | COVER,TONER CONVEYING CASE |
Парткод: | 36715340 |
Деталь: | GEAR 28,SUB UNIT AGITATION |
Парткод: | 71815100 |
Деталь: | SPONGE H,TONER HOPPER |
Парткод: | 74315190 |
Деталь: | SEAL A SEPARATION DUCT |
Парткод: | 77616280 |
Деталь: | HANDLE,DEVELOPING |
Парткод: | 36714180 |
Деталь: | WIRE,DEVELOPING UNIT |
Парткод: | 2A027610 |
Деталь: | UPPER SEAL,DEVELOPING |
Парткод: | 2A014360 |
Деталь: | FILTER,DEVELOPING |
Парткод: | 2A014460 |
Деталь: | HOLDER,DEVELOPING FILTER |
Парткод: | 2A014350 |
Деталь: | SET,DEVELOPING UNIT,ASSY (KM-6330) |
Парткод: | 2CJ83120 |
Деталь: | PARTS,DEVELOPING UNIT,ASSY, SP (KM-7530) |
Парткод: | 2FA93170 |
Деталь: | REARPULLEY DS |
Парткод: | 18514170 |
Деталь: | HOUSING, DEVELOPING |
Парткод: | 2A014011 |
Деталь: | GEAR, JOINT DEVELOPING |
Парткод: | 36714680 |
Деталь: | SPRING,LOWER DEV.ROLLER |
Парткод: | 61714290 |
Деталь: | GEAR,DEVELOPING IDLE |
Парткод: | 2A014041 |
Деталь: | PADDLE,DEVELOPING |
Парткод: | 2A014050 |
Деталь: | UPPER GEAR,DEVELOPING |
Парткод: | 2A014060 |
Деталь: | LOWER GEAR,DEVELOPING |
Парткод: | 2A014070 |
Деталь: | SPONGE,LOWER DEVELOPING |
Парткод: | 61714440 |
Деталь: | SEAL,DEVELOPING |
Парткод: | 65914430 |
Деталь: | BUSHING 6-31,AGITATION ROTOR |
Парткод: | 71614080 |
Деталь: | BUSHING,AGITATION ROLLER |
Парткод: | 71615050 |
Деталь: | FRONT COVER,SLEEVE |
Парткод: | 2A014120 |
Деталь: | REAR COVER,SLEEVE |
Парткод: | 2A014130 |
Деталь: | BUSHING,DEVELOPING PADDLE |
Парткод: | 2A014140 |
Деталь: | LOWER LEVER,DEVELOPING ROLLER |
Парткод: | 2A014151 |
Деталь: | LOWER CAM,DEVELOPING ROLLER |
Парткод: | 2A014160 |
Деталь: | GEAR,DEVELOPING PADDLE |
Парткод: | 2A014170 |
Деталь: | GEAR,PADDLE IDLE |
Парткод: | 2A014180 |
Деталь: | REAR BUSHING,LOWER DEVELOPING ROLLER |
Парткод: | 2A014200 |
Деталь: | FRONT BUSHING,LOWER DEVELOPING ROLLER |
Парткод: | 2A014210 |
Деталь: | LOWER GEAR,DEVELOPING IDLE |
Парткод: | 2A014220 |
Деталь: | BUSHING,DS |
Парткод: | 2A014250 |
Деталь: | STOPPER,DS HOLDER |
Парткод: | 2A014290 |
Деталь: | FILM,BUSHING PADDLE |
Парткод: | 2A014600 |
Деталь: | UPPER FELT,DEVELOPING |
Парткод: | 2A014380 |
Деталь: | UPPER SEAL,SLEEVE |
Парткод: | 2A014410 |
Деталь: | UPPER SPONGE,DEVELOPING |
Парткод: | 2A014440 |
Деталь: | LOWER SEAL,DEVELOPING ROLLER |
Парткод: | 2A014450 |
Деталь: | SPRING,MAGNET PRESSURE |
Парткод: | 2A014560 |
Деталь: | LOWER COVER,DEVELOPING |
Парткод: | 2A014570 |
Деталь: | WIRE,DEVELOPING BIAS |
Парткод: | 2A027441 |
Деталь: | GEAR 35,MAIN UNIT MIXING |
Парткод: | 71814180 |
Деталь: | GEAR 34,AGITATION ROLLER |
Парткод: | 45727604 |
Деталь: | BUSHING,AGITATION SPIRAL |
Парткод: | 2A014620 |
Деталь: | GEAR 27,DEVELOPING |
Парткод: | 36714130 |
Деталь: | REAR GEAR 25,DEVELOPING |
Парткод: | 36714140 |
Деталь: | BUSHING 6-23,MAIN UNIT |
Парткод: | 71814130 |
Деталь: | LEFT SPIRAL,DEVELOPING |
Парткод: | 36714230 |
Деталь: | CENTER SPIRAL,DEVELOPING |
Парткод: | 2A014640 |
Деталь: | RIGHT SPIRAL.DEVELOPING |
Парткод: | 36714250 |
Деталь: | LOWER SHAFT, DEVELOPING |
Парткод: | 36714280 |
Деталь: | GEAR,DEVELOPING IDLE |
Парткод: | 2CJ14010 |
Деталь: | FRONT FELT,DISPOSAL ROLLER |
Парткод: | 36714360 |
Деталь: | REAR FELT, DISPOSAL ROLLER |
Парткод: | 36714370 |
Деталь: | FRONT SPONGE,DEVELOPING |
Парткод: | 36714390 |
Деталь: | REAR SPONGE,DEVELOPING |
Парткод: | 36714400 |
Деталь: | FRONT SPONGE,SLEEVE BUSHING |
Парткод: | 36714450 |
Деталь: | REAR SPONGE,SLEEVE BUSHING |
Парткод: | 36714460 |
Деталь: | LOWER FELT,DEVELOPING ROLLER BUSHING |
Парткод: | 36714480 |
Деталь: | SHIELD,DEVELOPING DISPOSAL ROLLER |
Парткод: | 36714530 |
Деталь: | LOWER SPONGE,DEVELOPING BUSHING |
Парткод: | 36714550 |
Деталь: | FRONT SEAL,SENSOR CLEANING |
Парткод: | 36714580 |
Деталь: | REAR SEAL,SENSOR CLEANING |
Парткод: | 36714590 |
Деталь: | BUSHING 6,REGISTRATION ROLLER |
Парткод: | 72107760 |
Деталь: | ROLLER B,DUPLEX CONVEYING |
Парткод: | 68721750 |
Деталь: | PULLEY 20,DUPLEX CONVEYING |
Парткод: | 68721640 |
Деталь: | ROLLER C,DUPLEX CONVEYING |
Парткод: | 2AC07301 |
Деталь: | SHAFT D,REFEED ROLLER |
Парткод: | 2A017100 |
Деталь: | PULLEY,CONVEYING |
Парткод: | 3AK16030 |
Деталь: | ROLLER,SWITCHBACK DUPLEX |
Парткод: | 2A017170 |
Деталь: | BEARING,688ZZNR |
Парткод: | 28107400 |
Деталь: | SHAFT D,DUPLEX DRIVE |
Парткод: | 2A017150 |
Деталь: | LOWER ROLLER B,DUPLEX CONVEYING |
Парткод: | 2AC07311 |
Деталь: | PRESSING SPRING B,SB |
Парткод: | 29717220 |
Деталь: | LOWER ROLLER,DUPLEX CONVEYING |
Парткод: | 2AC07210 |
Деталь: | SPRING PAPER PAD PULLEY |
Парткод: | 76007150 |
Деталь: | GEAR 26,CLUTCH |
Парткод: | 45727303 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | COLLAR,PULLEY |
Парткод: | 34922530 |
Деталь: | TENSION PLATE,DUPLEX CONVEYING |
Парткод: | 68721571 |
Деталь: | IDLE PULLEY 15 |
Парткод: | 75722252 |
Деталь: | PIN,ORIGINAL HOLDER |
Парткод: | 48129000 |
Деталь: | BELT 600,DUPLEX CONVEYING |
Парткод: | 68721660 |
Деталь: | GEAR 18,SWITCH BACK |
Парткод: | 68321260 |
Деталь: | GEAR 17,PF BELT ROLLER |
Парткод: | 45729103 |
Деталь: | SPRING,TRAILING EDGE TAPPING |
Парткод: | 68721760 |
Деталь: | GEAR 22,SPIRAL ROLLER |
Парткод: | 72118160 |
Деталь: | GEAR 28,JOINT |
Парткод: | 45728116 |
Деталь: | GEAR 20/30,DUPLEX REGISTRATION |
Парткод: | 2AC07050 |
Деталь: | DRIVE GEAR,PRE-TRANSFER |
Парткод: | 45729418 |
Деталь: | UPPER ROLLER,DUPLEX REGISTRATION |
Парткод: | 2AC07040 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | BUSHING 6,LOWER REGISTRATION ROLLER |
Парткод: | 72107160 |
Деталь: | PARTS 120,ASSY FIXING UNIT(S P) (KM-6330) |
Парткод: | 2CJ93031 |
Деталь: | PARTS,FIXING UNIT ASSY 120,SP (KM-7530) |
Парткод: | 2FA93020 |
Деталь: | PARTS 240,ASSY FIXING UNIT(S P) (KM-6330) |
Парткод: | 2CJ93041 |
Деталь: | PARTS,FIXING UNIT ASSY 240,SP (KM-7530) |
Парткод: | 2FA93030 |
Деталь: | BEARING 6907ZZNRC4ENS |
Парткод: | G3169070 |
Деталь: | SPRING,FIXING GUIDE (KM-6330) |
Парткод: | 2CJ20120 |
Деталь: | CLAMP,HEAT PROOF KCA-44 |
Парткод: | M2105800 |
Деталь: | WIRE SADDLE,LWS-1S-F(KITAGAWA) |
Парткод: | M2109280 |
Деталь: | THERMISTOR,FIXING |
Парткод: | 18520201 |
Деталь: | ROLLER,HEAT |
Парткод: | 2A020010 |
Деталь: | PRESS ROLLER (KM-6330) |
Парткод: | 2BC20260 |
Деталь: | PRESS ROLLER (KM-7530) |
Парткод: | 2FA20190 |
Деталь: | LOWER REAR FRAME,FIXING |
Парткод: | 2A020030 |
Деталь: | UPPER FRONT GUIDE,FIXING |
Парткод: | 2A020040 |
Деталь: | MOUNT,FIXING DRAWER |
Парткод: | 2A020080 |
Деталь: | HEATER MU,FIXING(120) (KM-6330) |
Парткод: | 2A020130 |
Деталь: | PARTS,HEATER M FIXING(120),SP (KM-7530) |
Парткод: | 2FA93100 |
Деталь: | HEATER MU,FIXING(240) |
Парткод: | 2A020150 |
Деталь: | HEATER SU,FIXING(120) |
Парткод: | 2A020140 |
Деталь: | HEATER SU,FIXING(240) |
Парткод: | 2A020160 |
Деталь: | UPPER FRONT FRAME,FIXING |
Парткод: | 2A020210 |
Деталь: | UPPER REAR FRAME,FIXING |
Парткод: | 2A020220 |
Деталь: | PARTS,ROLLER PRESSING CLEANING A(SP) |
Парткод: | 2CJ93140 |
Деталь: | WIRE,FIXING UNIT |
Парткод: | 2A027420 |
Деталь: | GEAR 38T |
Парткод: | 45728900 |
Деталь: | INSULATOR D |
Парткод: | 29620330 |
Деталь: | INSULATOR T |
Парткод: | 29620340 |
Деталь: | SPRING,PRESSURE (KM-6330) |
Парткод: | 2A020370 |
Деталь: | SPRING, PRESSURE (KM-7530) |
Парткод: | 2FA20250 |
Деталь: | GEAR,JOINT DEVELOPING |
Парткод: | 36714680 |
Деталь: | GEAR,HEAT ROLLER |
Парткод: | 36720061 |
Деталь: | FRONT LEVER, PRESSURE (KM-6330) |
Парткод: | 2CJ20040 |
Деталь: | FRONT LEVER, PRESSURE (KM-7530) |
Парткод: | 2FA20230 |
Деталь: | REAR LEVER, PRESSURE (KM-6330) |
Парткод: | 2CJ20050 |
Деталь: | REAR LEVER, PRESSURE (KM-7530) |
Парткод: | 2FA20240 |
Деталь: | LOWER FRONT FRAME,FIXING |
Парткод: | 36720120 |
Деталь: | LOWER FRONT GUIDE,FIXING |
Парткод: | 2CJ20100 |
Деталь: | LOWER RIGHT STAY, FIXING |
Парткод: | 36720170 |
Деталь: | FRONT SUPPORT PLATE,HEATER |
Парткод: | 36720341 |
Деталь: | REAR SUPPORT PLATE,HEATER |
Парткод: | 36720351 |
Деталь: | FRONT GUIDE,FIXING EJECT TURN AUXILIARY |
Парткод: | 36720370 |
Деталь: | REAR GUIDE,FIXING EJECT TURN AUXILIARY |
Парткод: | 36720380 |
Деталь: | TENSION PLATE,FIXING DRIVE |
Парткод: | 36720410 |
Деталь: | SHAFTPRESS ROLLER |
Парткод: | 2CJ20080 |
Деталь: | THERMAL PROTECTOR 180,FIXING |
Парткод: | 36720590 |
Деталь: | LOWER FRONT SPRING,FIXING (KM-6330) |
Парткод: | 36720610 |
Деталь: | TERMINAL,MAIN HEATER |
Парткод: | 61720290 |
Деталь: | TERMINAL,SUB HEATER |
Парткод: | 61720300 |
Деталь: | GEAR 28,IDLE DRIVE |
Парткод: | 67322180 |
Деталь: | PIN,DRUM LIFT |
Парткод: | 71802210 |
Деталь: | SPRING, BLADE THRUST |
Парткод: | 73818100 |
Деталь: | PIN WEIGHT DETECTOR |
Парткод: | 74318650 |
Деталь: | BUSHING HEAT ROLLER |
Парткод: | 78620531 |
Деталь: | FRONT STATIC ELIMINATOR,FIXING (KM-6330) |
Парткод: | 2A020350 |
Деталь: | SUPPORT PLATE,FIXING CLEANING SHAFT |
Парткод: | 2A020250 |
Деталь: | SHAFT A,FIXING CLEANING DRIVE |
Парткод: | 2A020260 |
Деталь: | STAY A,FIXING CLEANING |
Парткод: | 2CJ20030 |
Деталь: | SHAFT B,FIXING CLEANING DRIVE |
Парткод: | 2A020310 |
Деталь: | SHAFT,FIXING CLEANING RETAINING |
Парткод: | 2A020320 |
Деталь: | FELT,CLEANING |
Парткод: | 2A020330 |
Деталь: | GEAR 16,OIL ROLLER |
Парткод: | 36520931 |
Деталь: | GEAR 30,DEVELOPING DRIVE |
Парткод: | 66022131 |
Деталь: | BUSHING,BYPASS CAM |
Парткод: | 66222140 |
Деталь: | BUSH,FIXING CLEANING |
Парткод: | 61720460 |
Деталь: | PIN,FIXING DRAWER |
Парткод: | 2BC20520 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | EDGING,EDS-3-F(KITAGAWA) |
Парткод: | M2104380 |
Деталь: | BINDING BAND,PLT1M |
Парткод: | M2607010 |
Деталь: | SPRING.FIXING GUIDE (KM-7530) |
Парткод: | 2FA20220 |
Деталь: | WAVE WASHER WW-10 |
Парткод: | C3990140 |
Деталь: | COVER,FEED SHIFT WIRE |
Парткод: | 36721400 |
Деталь: | BINDING BAND,KB-100-1 |
Парткод: | M0207000 |
Деталь: | EDGING,EDS-0607U(KITAGAWA) |
Парткод: | M2104260 |
Деталь: | MINIATURE CLAMP,UAMS-07-0 |
Парткод: | M2105730 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | PULLEYCONVEYING BELT |
Парткод: | 18308260 |
Деталь: | SOLENOID,STOPPER |
Парткод: | 18327130 |
Деталь: | PULLEY 22,FEED SHIFT |
Парткод: | 2AC21650 |
Деталь: | FRONT FRAME,FEED SHIFT |
Парткод: | 2A021010 |
Деталь: | REAR FRAME,FEED SHIFT |
Парткод: | 2A021020 |
Деталь: | LOWER GUIDEA.FEED SHIFT |
Парткод: | 2CJ21041 |
Деталь: | LEFT GUIDE,FEED SHIFT |
Парткод: | 2A021041 |
Деталь: | UPPER GUIDE,FEED SHIFT EJECT |
Парткод: | 2A021050 |
Деталь: | LOWER GUIDE,FEED SHIFT EJECT |
Парткод: | 2A021060 |
Деталь: | MOUNT,FEED SHIFT SOLENOID |
Парткод: | 2A021070 |
Деталь: | RIGHT ROLLER,TURN OVER FEED |
Парткод: | 2A021080 |
Деталь: | LOWER RIGHT GUIDE,TURN OVER EJECT |
Парткод: | 2A021090 |
Деталь: | BEARING,686ZZNR |
Парткод: | 74808080 |
Деталь: | ROLLER,FEED SHIFT |
Парткод: | 2A021310 |
Деталь: | LEVER A,CONVEYING SHIFT |
Парткод: | 2A021320 |
Деталь: | RIGHT ROLLER,FEED SHIFT(A) |
Парткод: | 2A021390 |
Деталь: | LEFT ROLLER,FEED SHIFT |
Парткод: | 2A021351 |
Деталь: | WIRE, FEED SHIFT UNIT (KM-6330) |
Парткод: | 2A027410 |
Деталь: | WIRE, FEED SHIFT UNIT (KM-7530) |
Парткод: | 2FA27100 |
Деталь: | BUSING, PAPER FEED |
Парткод: | 28801300 |
Деталь: | PIN,TENSION |
Парткод: | 48129208 |
Деталь: | GEAR 19,S.B |
Парткод: | 45729403 |
Деталь: | PRESSING SPRING B,SB |
Парткод: | 29717220 |
Деталь: | SWITCH.PHOT0 INTERRUPTOR |
Парткод: | 2A127050 |
Деталь: | PULLEY 16,ADF |
Парткод: | 35911520 |
Деталь: | UPPER GUIDE,FEED SHIFT |
Парткод: | 36721221 |
Деталь: | TENSION PLATE,FEED SHIFT DRIVE |
Парткод: | 36721300 |
Деталь: | LEVER B,CONVEYING SHIFT |
Парткод: | 36721340 |
Деталь: | GEAR,EJECT JOINT |
Парткод: | 36721350 |
Деталь: | COLLAR 31,EJECT JOINT |
Парткод: | 36721360 |
Деталь: | BELT 300,DUPLEX CONVEYING |
Парткод: | 36921170 |
Деталь: | PULLEY 24,EJECT |
Парткод: | 63212180 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | PULLEY FEED SHIFT |
Парткод: | 68720160 |
Деталь: | MOUNT,FEED SHIFT PULLEY |
Парткод: | 68720170 |
Деталь: | PULLEY 20 DRIVE |
Парткод: | 76514050 |
Деталь: | STATIC ELIMINATOR,FEED SHIFT |
Парткод: | 68720180 |
Деталь: | SWITCH,DUPLEX CONVEYING |
Парткод: | 68727030 |
Деталь: | SPRING,REVERSE SOLENOID |
Парткод: | 73226040 |
Деталь: | COVER,PAPER EJECT FAN CONNECTOR (KM-6330) |
Парткод: | 36721420 |
Деталь: | FILM,EJECT WIND SHIELD (KM-6330) |
Парткод: | 2A023070 |
Деталь: | LABEL L,HIGH TEMPERATURE CAUTION(EXP) (KM-6330) |
Парткод: | 20305130 |
Деталь: | WIRE SADDLE,LWS-1S (KM-6330) |
Парткод: | M2109180 |
Деталь: | MOUNT,PAPER EJECT COOLING FAN |
Парткод: | 36721411 |
Деталь: | FAN,FIXING (KM-6330) |
Парткод: | 36727500 |
Деталь: | SHAFT.ACTUATOR |
Парткод: | 2CJ21050 |
Деталь: | MOUNT, PI SWITCH |
Парткод: | 2CJ21060 |
Деталь: | BASEACTUATOR |
Парткод: | 2CJ21070 |
Деталь: | SPRING A,ACTUATOR |
Парткод: | 2CJ21080 |
Деталь: | FULCRUM PIN,TABLE |
Парткод: | 3AL06102 |
Деталь: | SWITCH,SIZE DETECTION |
Парткод: | 18327100 |
Деталь: | LABEL,ORIGINAL SIZE(METRIC) |
Парткод: | 3AL05040 |
Деталь: | LABEL,ORIGINAL CURSOR(METRIC) |
Парткод: | 3AL05060 |
Деталь: | TABLE,ORIGINAL |
Парткод: | 3C006010 |
Деталь: | FRONT GUIDE,ORIGINAL(K M) |
Парткод: | 3AL06130 |
Деталь: | REAR GUIDE,ORIGINAL(K M) |
Парткод: | 3AL06140 |
Деталь: | RACK,TABLE |
Парткод: | 3AL06041 |
Деталь: | COVER,TABLE |
Парткод: | 3C006020 |
Деталь: | MOUNT,SIZE DETECTION |
Парткод: | 3AL06060 |
Деталь: | FRONT SUPPORT PLATE,TABLE |
Парткод: | 3AL06072 |
Деталь: | CUSHION,ORIGINAL GUIDE |
Парткод: | 3AL06090 |
Деталь: | COVER,ORIGINAL GUIDE |
Парткод: | 3C006030 |
Деталь: | WIRE,TABLE |
Парткод: | 3AL27030 |
Деталь: | GEAR 20,CASSETTE |
Парткод: | 65907210 |
Деталь: | FILTER CF SENSOR |
Парткод: | 78706241 |
Деталь: | JAM DETECTION SWITCH |
Парткод: | 78727110 |
Деталь: | CORE,7-15X18 |
Парткод: | 65027470 |
Деталь: | NYLON CLAMP 6N,NK-6N |
Парткод: | M2105040 |
Деталь: | PARTS,DRIVER PCB,SP |
Парткод: | 3AL93020 |
Деталь: | WIRE,INTERFACE |
Парткод: | 3BC27020 |
Деталь: | WIRE,PAPER FEED |
Парткод: | 3BC27014 |
Деталь: | MOUNT,DF WIRE |
Парткод: | 3BC22060 |
Деталь: | STRAIN RELEAF BUSHING,SR-7W-2 |
Парткод: | M1203550 |
Деталь: | REAR RETAINING PIN,FEED |
Парткод: | 36706240 |
Деталь: | UPPER FRONT FRAME,FEED |
Парткод: | 36706010 |
Деталь: | UPPER REAR FRAME,FEED |
Парткод: | 36706020 |
Деталь: | UPPER RIGHT GUIDE,FEED |
Парткод: | 36706030 |
Деталь: | UPPER LEFT GUIDE,FEED |
Парткод: | 36706040 |
Деталь: | UPPER ROLLER,FEED |
Парткод: | 36706050 |
Деталь: | LOWER ROLLER,FEED |
Парткод: | 36706060 |
Деталь: | FILM,FEED |
Парткод: | 36706180 |
Деталь: | UPPER STAY, FEED |
Парткод: | 36706320 |
Деталь: | BELT, FEED HANDLE |
Парткод: | 36706410 |
Деталь: | HANDLE,FEED |
Парткод: | 36706420 |
Деталь: | UPPER GEAR 16,REGISTRATION |
Парткод: | 36706530 |
Деталь: | PULLEY 22,FEED |
Парткод: | 65722030 |
Деталь: | BUSHING 8 |
Парткод: | 67322230 |
Деталь: | BUSHING 6,LOWER REGISTRATION ROLLER |
Парткод: | 72107160 |
Деталь: | GEAR 18,LOOP |
Парткод: | 73210370 |
Деталь: | UPPER REAR SPRING, FEED |
Парткод: | 2A006310 |
Деталь: | UPPER FRONT SPRING, FEED |
Парткод: | 2A006300 |
Деталь: | BELT, FEED DRIVE |
Парткод: | 36706390 |
Деталь: | BINDING BAND,KB-100-1 |
Парткод: | M0207000 |
Деталь: | GEAR 16T |
Парткод: | 29806490 |
Деталь: | SWITCH,FEED |
Парткод: | 2A027720 |
Деталь: | RIGHT PULLEY,FEED |
Парткод: | 33906660 |
Деталь: | LEFT ROLLER,FEED |
Парткод: | 36706141 |
Деталь: | SHAFT,FEED PULLEY |
Парткод: | 36706150 |
Деталь: | LOWER FRONT FRAME,FEED |
Парткод: | 36706331 |
Деталь: | LOWER REAR FRAME,FEED |
Парткод: | 36706341 |
Деталь: | LOWER RIGHT GUIDE,FEED |
Парткод: | 36706350 |
Деталь: | LOWER LEFT GUIDE,FEED |
Парткод: | 36706360 |
Деталь: | WIRE,FEED |
Парткод: | 36727390 |
Деталь: | Pressing Spring |
Парткод: | 77706461 |
Деталь: | PULLEYPF GEAR 30 |
Парткод: | 72407330 |
Деталь: | GEAR 20,IDLE |
Парткод: | 29816080 |
Деталь: | GEAR 22/32,FEED |
Парткод: | 33522090 |
Деталь: | MOUNT,FEED DRIVE |
Парткод: | 36706370 |
Деталь: | LOWER COVER,IMAGE FORMATION |
Парткод: | 2CJ04250 |
Деталь: | UPPER FRONT COVER (KM-6330) |
Парткод: | 2CJ04061 |
Деталь: | UPPER FRONT COVER (KM-7530) |
Парткод: | 2FA04011 |
Деталь: | FRONT MOUNT,COVER HINGE |
Парткод: | 2A004150 |
Деталь: | FEED GUIDE,SAFETY SWITCH |
Парткод: | 2A004161 |
Деталь: | FRONT FEED GUIDE,COVER MAGNET |
Парткод: | 2A004170 |
Деталь: | FRONT HINGE,COVER(B) |
Парткод: | 2A004330 |
Деталь: | LOWER REAR COVER |
Парткод: | 2CJ04020 |
Деталь: | LABEL,STOPPER |
Парткод: | 67505110 |
Деталь: | LABEL,STOPPER(EUR) |
Парткод: | 2AD05050 |
Деталь: | LABEL,FEED OPERATION(EUR) |
Парткод: | 2A005130 |
Деталь: | LOWER RIGHT INNER COVER |
Парткод: | 2CJ04240 |
Деталь: | UPPER FRONT FEED GUIDE,COVER |
Парткод: | 2CJ04290 |
Деталь: | MAGNET CATCH |
Парткод: | 60804120 |
Деталь: | LABEL,HIGH VOLTAGE CAUTION |
Парткод: | 20305090 |
Деталь: | LABEL,HIGH VOLTAGE CAUTION(EUR) |
Парткод: | 2A005060 |
Деталь: | COVER,ROM |
Парткод: | 2CJ04070 |
Деталь: | Lower left cover |
Парткод: | 2CJ04200 |
Деталь: | MAGNET, FEED SHIFT |
Парткод: | 62207620 |
Деталь: | PIN,ORIGINAL TRAY |
Парткод: | 2A004130 |
Деталь: | LOWER REAR LEFT COVER |
Парткод: | 2CJ04210 |
Деталь: | LOWER REAR LEFT HINGE,COVER |
Парткод: | 36704210 |
Деталь: | LOWER REAR LEFT MOUNT,COVER HINGE |
Парткод: | 36704220 |
Деталь: | LEFT PROJECTION,COVER MAGNET |
Парткод: | 36704350 |
Деталь: | SPONGE,DISPOSAL TANK PRESSURE |
Парткод: | 36718620 |
Деталь: | UPPER REAR MOUNT,COVER |
Парткод: | 2A004020 |
Деталь: | REAR COVER,MIDDLE |
Парткод: | 2CJ04010 |
Деталь: | UPPER LEFT COVER |
Парткод: | 2CJ04080 |
Деталь: | LEFT COVER,MIDDLE |
Парткод: | 2CJ04090 |
Деталь: | UPPER REAR COVER |
Парткод: | 2CJ04100 |
Деталь: | UPPER RIGHT COVER |
Парткод: | 2CJ04110 |
Деталь: | RIGHT COVER,MIDDLE |
Парткод: | 2CJ04121 |
Деталь: | UPPER INNER COVER |
Парткод: | 2CJ04130 |
Деталь: | LEFT COVER,IMAGE FORMATION |
Парткод: | 2CJ04140 |
Деталь: | RIGHT COVER,IMAGE FORMATION |
Парткод: | 2CJ04150 |
Деталь: | LOWER FRONT RIGHT COVER |
Парткод: | 2CJ04170 |
Деталь: | LOWER REAR RIGHT COVER |
Парткод: | 2CJ04180 |
Деталь: | Lower right cover |
Парткод: | 2CJ04190 |
Деталь: | UPPER FRONT HINGE A,COVER |
Парткод: | 2A004320 |
Деталь: | PIN,HINGE STOP |
Парткод: | 2A004350 |
Деталь: | LOWER LEFT MOUNT,COVER |
Парткод: | 2A004370 |
Деталь: | LOWER FRONT RIGHT MOUNT,COVER |
Парткод: | 2A004380 |
Деталь: | COVER,TRANSFER CONVEYING |
Парткод: | 2CJ04270 |
Деталь: | LOWER FRONT RIGHT MOUNT A,COVER |
Парткод: | 36704560 |
Деталь: | LABEL,TRANSFER BELT |
Парткод: | 20305100 |
Деталь: | LABEL,TRANSFER BELT(EUR) |
Парткод: | 2A005070 |
Деталь: | LABEL,CONVEYING OPERATION |
Парткод: | 36705040 |
Деталь: | LABEL,CONVEYING OPERATION(EUR) |
Парткод: | 2A005080 |
Деталь: | MOUNT,ORIGINAL TRAY |
Парткод: | 2A004100 |
Деталь: | BASEHOPPER JOINT |
Парткод: | 2A015260 |
Деталь: | UPPER PARTS,ASSY HOPPER,USA-SP |
Парткод: | 2CJ93050 |
Деталь: | UPPER PARTS,ASSY HOPPER,EUR-SP |
Парткод: | 2CJ93060 |
Деталь: | LID,TONER SUPPLY |
Парткод: | 2CJ15010 |
Деталь: | HINGE,TONER SUPPLY |
Парткод: | 2A004200 |
Деталь: | HOLDER,HINGE |
Парткод: | 2A004210 |
Деталь: | LOWER MOUNT BASE,HOPPER |
Парткод: | 2A015060 |
Деталь: | SHUTTER,HOPPER(USA) |
Парткод: | 2BC15280 |
Деталь: | SHUTTER,HOPPER(EUR) |
Парткод: | 2BC15290 |
Деталь: | SHAFT,TONER SUPPLY HINGE |
Парткод: | 36704181 |
Деталь: | RETAINER,MAGNET |
Парткод: | 36704520 |
Деталь: | MAGNET,TONER SUPPLY |
Парткод: | 36704530 |
Деталь: | LABEL,TONER SUPPLY |
Парткод: | 36705060 |
Деталь: | SEAL,HOPPER |
Парткод: | 36715550 |
Деталь: | STOPPER,HOPPER |
Парткод: | 36715560 |
Деталь: | SPRING,HOPPER |
Парткод: | 36715570 |
Деталь: | SPONGE,DUCT HOPPER |
Парткод: | 36715600 |
Деталь: | GUIDE FILM,DUPLEX CONVEYING |
Парткод: | 36717120 |
Деталь: | UPPER SPONGE,HOPPER HOUSING |
Парткод: | 2A015240 |
Деталь: | UPPER HOUSING,HOPPER |
Парткод: | 2CJ15020 |
Деталь: | UPPER MOUNT BASE G,HOPPER(USA) |
Парткод: | 2CJ15050 |
Деталь: | UPPER MOUNT BASE H,HOPPER(EUR) |
Парткод: | 2CJ15060 |
Деталь: | LABEL,HIGH VOLTAGE CAUTION |
Парткод: | 20305090 |
Деталь: | LABEL,HIGH VOLTAGE CAUTION(EUR) |
Парткод: | 2A005060 |
Деталь: | SPONGE F,HOPPER HOUSING |
Парткод: | 2A015230 |
Деталь: | LABEL,JAM REMOVEMENT PAPER FEED |
Парткод: | 2CJ05050 |
Деталь: | LOWER HOUSING,HOPPER |
Парткод: | 2CJ15030 |
Деталь: | MINIATURE CLAMP,UAMS-05S-2 |
Парткод: | M2105740 |
Деталь: | COVER,TONER DRAW |
Парткод: | 2A015030 |
Деталь: | SPRING,CLEANING |
Парткод: | 2A015040 |
Деталь: | COVER,DRAW SPIRAL |
Парткод: | 2A015050 |
Деталь: | SPONGE A,HOPPER HOUSING |
Парткод: | 2A015080 |
Деталь: | SPONGE B,HOPPER HOUSING |
Парткод: | 2A015090 |
Деталь: | SPONGE C,HOPPER HOUSING |
Парткод: | 2A015100 |
Деталь: | SPONGE D,HOPPER HOUSING |
Парткод: | 2A015110 |
Деталь: | FILM A,HOPPER HOUSING |
Парткод: | 2A015120 |
Деталь: | FILM B,HOPPER HOUSING |
Парткод: | 2A015130 |
Деталь: | FILM,HOPPER LID |
Парткод: | 36715730 |
Деталь: | BUSHING 6-21,MAIN UNIT |
Парткод: | 71814100 |
Деталь: | FILM,TONER LIMITATION |
Парткод: | 2A015220 |
Деталь: | GEAR,TONER SUPPLY |
Парткод: | 33415181 |
Деталь: | TONER EMPTY DETECTION SENSOR |
Парткод: | 33915180 |
Деталь: | STOPPER 4 |
Парткод: | 34806140 |
Деталь: | SPIRAL,TONER CONVEYING |
Парткод: | 36715050 |
Деталь: | SPIRAL,TONER DRAW |
Парткод: | 36715060 |
Деталь: | LEVER,SHUTTER |
Парткод: | 36715120 |
Деталь: | HOLDER,SHUTTER |
Парткод: | 36715130 |
Деталь: | SPRING,HOPPER AGITATION |
Парткод: | 36715140 |
Деталь: | SHAFT,HOPPER AGITATION |
Парткод: | 36715200 |
Деталь: | MOTOR,TONER AGITATION |
Парткод: | 36715210 |
Деталь: | MOUNT,CLEANING SPRING |
Парткод: | 36715230 |
Деталь: | HOLDER,CLEANING SPRING |
Парткод: | 36715240 |
Деталь: | SUPPORT PLATE,HOPPER |
Парткод: | 36715300 |
Деталь: | PARTS,MOTOR TONER SUPPLY(SP) |
Парткод: | 36793270 |
Деталь: | GEAR 41,HOPPER AGITATION |
Парткод: | 36715380 |
Деталь: | GEAR 17,IDLE |
Парткод: | 36715410 |
Деталь: | SEAL,SHUTTER LEVER |
Парткод: | 36715420 |
Деталь: | SEAL,SUPPLY JOINT |
Парткод: | 36715430 |
Деталь: | GEAR 13,HOPPER DRAW |
Парткод: | 36715630 |
Деталь: | GEAR 22,HOPPER |
Парткод: | 36715640 |
Деталь: | GEAR 22/13,IDLE |
Парткод: | 36715650 |
Деталь: | GEAR 23/44,TONER MOTOR |
Парткод: | 36715660 |
Деталь: | SPONGE,TONER SUPPLY JOINT |
Парткод: | 36715710 |
Деталь: | BUSHING,SPIRAL ROLLER |
Парткод: | 63814070 |
Деталь: | FRONT BUSHING 12B,AGITATION |
Парткод: | 65814420 |
Деталь: | COPY TRAY(EXP) |
Парткод: | 2A304190 |
Деталь: | FRONT RETAINER,SLIDER |
Парткод: | 3B803500 |
Деталь: | REAR RETAINER,SLIDER |
Парткод: | 3B803510 |
Деталь: | MOUNT,SLIDER |
Парткод: | 3B803520 |
Деталь: | JUNCTION PLATE,SLIDER |
Парткод: | 3B803530 |
Деталь: | JUNCTION PLATE,MACHINE |
Парткод: | 3B803540 |
Деталь: | MOUNT,MACHINE |
Парткод: | 3B803550 |
Деталь: | STOPPER,JUNCTION PLATE |
Парткод: | 3B803560 |
Деталь: | RAIL,RELEASE |
Парткод: | 3B803570 |
Деталь: | HOOK,RELEASE |
Парткод: | 3B803580 |
Деталь: | RETAINER,RELEASE |
Парткод: | 3B803590 |
Деталь: | SLIDER,FINISHER |
Парткод: | 3B803600 |
Деталь: | HANDLE,RELEASE |
Парткод: | 3B803610 |
Деталь: | REINFORCEMENT, MACHINE INSTALLATION |
Парткод: | 3B803620 |
Деталь: | ADJUSTING PLATE,RELEASE |
Парткод: | 3B803630 |
Деталь: | GROUND PLATE A,NOISE |
Парткод: | 18526211 |
Деталь: | PLATE SPRING,HOOK RELEASE |
Парткод: | 3AK02210 |
Деталь: | TRIPLE TAP-TITE P SCREW M4X12(BLACK) |
Парткод: | B4344120 |
Деталь: | TRIPLE TAP-TITE P SCREW M4X6(BRONZE) |
Парткод: | B4344060 |
Деталь: | BINDING SCREW BVM4X6 (BLACK) |
Парткод: | B1304060 |
Деталь: | BINDING SCREW BVM4X10 (BLACK) |
Парткод: | B1304100 |
Деталь: | BINDING SCREW BVM3X5 (BLACK) |
Парткод: | B1303050 |
Деталь: | CLAMP,GNK-5N(NIKKO) (KM-6330) |
Парткод: | M2505150 |
Деталь: | SHIELD 10X20X50,GASKET (KM-6330) |
Парткод: | 2AZ27510 |
Деталь: | SHIELD 10X20X50,GASKET (KM-7530) |
Парткод: | 2AZ27510 |
Деталь: | SHAFT, PAPER FEED IDLE |
Парткод: | 2A007040 |
Деталь: | PULLEY,PAPER FEED BELT |
Парткод: | 2A007020 |
Деталь: | SHAFT, PAPER FEED DRIVE |
Парткод: | 2A007030 |
Деталь: | UPPER ROLLER,CONVEYING |
Парткод: | 2A007120 |
Деталь: | FILM,SEPARATION DUCT(INCH) |
Парткод: | 2A007960 |
Деталь: | LOWER DUCT,PAPER FEED BELT |
Парткод: | 2A007070 |
Деталь: | PAPER SWITCH |
Парткод: | 66006360 |
Деталь: | RIGHT WIRE,FEED UNIT |
Парткод: | 2CJ27100 |
Деталь: | UPPER DUCT,PAPER FEED BELT |
Парткод: | 2A007060 |
Деталь: | SUPPORT PLATE,PAPER FEED BELT |
Парткод: | 2A007050 |
Деталь: | TORQUE LIMITER,ROLLER FEED IN |
Парткод: | 36816380 |
Деталь: | BEARING,688ZZNR |
Парткод: | 28107400 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | UPPER DUCT,INHALATION JOINT |
Парткод: | 2CJ07110 |
Деталь: | LOWER DUCT,INHALATION JOINT |
Парткод: | 2CJ07120 |
Деталь: | REAR LOWER SUPPORT PLATE,GUIDE CONVEYING |
Парткод: | 2A007640 |
Деталь: | MOUNT,PULLEY CONVEYING |
Парткод: | 2CJ07080 |
Деталь: | LOWER SHAFT,CONVEYING |
Парткод: | 2A007110 |
Деталь: | EJECT PULLEY |
Парткод: | 60820010 |
Деталь: | LOWER SPRING,PAPER FEED |
Парткод: | 34806050 |
Деталь: | LOWER GUIDE,CONVEYING |
Парткод: | 2A007090 |
Деталь: | STOPPER 5,RING |
Парткод: | 33906630 |
Деталь: | RETAINER,TORQUE LIMITER |
Парткод: | 2CJ07090 |
Деталь: | UPPER MOUNT,SEPARATION DUCT |
Парткод: | 2A007130 |
Деталь: | UPPER DUCTSEPARATION |
Парткод: | 2CJ07160 |
Деталь: | BLADE PAPER FEED ASSY |
Парткод: | 2CJ00510 |
Деталь: | LOWER GUIDE,DUCT |
Парткод: | 2A007260 |
Деталь: | LOWER FILM,DUCT |
Парткод: | 2A007400 |
Деталь: | SEAL,INHALATION JOINT |
Парткод: | 2CJ07150 |
Деталь: | REAR SEAL,SEPARATION |
Парткод: | 2CJ07140 |
Деталь: | BELT LCF,PAPER FEED |
Парткод: | 2A007990 |
Деталь: | FRONT GUIDE,DUCT |
Парткод: | 2A007450 |
Деталь: | FILM.CLUTCH |
Парткод: | 2CJ07220 |
Деталь: | CLUTCH,PAPER FEED BELT |
Парткод: | 2A007980 |
Деталь: | FRONT SPONGE,INHALATION |
Парткод: | 2A007770 |
Деталь: | SPACER,DUCT |
Парткод: | 2CJ07210 |
Деталь: | PARTS, TRANSFER BELTASSY,SP (KM-7530) |
Парткод: | 2FA93160 |
Деталь: | BEARING 686ZZ (KM-7530) |
Парткод: | G3001360 |
Деталь: | ROLLER, TRANSFER (KM-7530) |
Парткод: | 2A016020 |
Деталь: | PARTSJBELT TRANSFERS P) (KM-7530) |
Парткод: | 36793281 |
Деталь: | LABEL B,UNIT REPLACEMENT (KM-7530) |
Парткод: | 2BC05270 |
Деталь: | ROLLER, BEL T DRIVE (KM-7530) |
Парткод: | 2FA16050 |
Деталь: | ROLLER, MIDDLE (KM-7530) |
Парткод: | 2A016061 |
Деталь: | ROLLER, IDLE (KM-7530) |
Парткод: | 2A016070 |
Деталь: | TERMINAL A.DRIVE ROLLER (KM-7530) |
Парткод: | 2A016310 |
Деталь: | BUSHING, MIDDLE ROLLER (KM-7530) |
Парткод: | 2A016100 |
Деталь: | FRONT ROLLER, TRANSFER (KM-7530) |
Парткод: | 2A016111 |
Деталь: | SPRING,FIXING UNIT SOL (KM-7530) |
Парткод: | 48528213 |
Деталь: | BEARING 688ADD (KM-7530) |
Парткод: | 45592554 |
Деталь: | BUSHING CLEANING UNIT (KM-7530) |
Парткод: | 74718091 |
Деталь: | IDLE GEAR 22 (KM-7530) |
Парткод: | 45728115 |
Деталь: | BUSHING, PRESSING ROLLER (KM-7530) |
Парткод: | 63520170 |
Деталь: | GROUND WIRE, TRANSFER BELT (KM-7530) |
Парткод: | 36727650 |
Деталь: | GROUND PLATE A, MIDDLE ROLLER (KM-7530) |
Парткод: | 2A016300 |
Деталь: | FILM, TRANSFER SPRING (KM-7530) |
Парткод: | 36716920 |
Деталь: | SPRING, TRANSFER (KM-7530) |
Парткод: | 35316030 |
Деталь: | BUSHING, IDLE ROLLER (KM-7530) |
Парткод: | 36716240 |
Деталь: | STAY, TRANSFER (KM-7530) |
Парткод: | 36716263 |
Деталь: | RETAINER, TRANSFER ROLLER (KM-7530) |
Парткод: | 36716271 |
Деталь: | ELECTRODE, TRANSFER (KM-7530) |
Парткод: | 36716290 |
Деталь: | ELECTRODE B, TRANSFER (KM-7530) |
Парткод: | 36716300 |
Деталь: | FRONT FRAME, TURN (KM-7530) |
Парткод: | 36716311 |
Деталь: | REAR FRAME, TURN (KM-7530) |
Парткод: | 36716321 |
Деталь: | GEAR 15, CLEANING DRIVE (KM-7530) |
Парткод: | 36716360 |
Деталь: | SUPPORT PLATE, TRANSFER (KM-7530) |
Парткод: | 36716840 |
Деталь: | SPRING, TRANSFER ELECTRODE (KM-7530) |
Парткод: | 36716670 |
Деталь: | PARTS,BRUSH BELT CLEANINGASSY,SP (KM-7530) |
Парткод: | 2FA93150 |
Деталь: | PARTS.SEAL CLEANING(SP) (KM-7530) |
Парткод: | 36793670 |
Деталь: | LOWER SPONGE,BLADE (KM-7530) |
Парткод: | 36718400 |
Деталь: | HOUSING.BELT CLEANING (KM-7530) |
Парткод: | 36716481 |
Деталь: | NOZZLEJDISPOSAL (KM-7530) |
Парткод: | 36716490 |
Деталь: | SHUTTER,BELT CLEANING (KM-7530) |
Парткод: | 36716510 |
Деталь: | SHIELDA,SHUTTER (KM-7530) |
Парткод: | 36716530 |
Деталь: | SCRAPER,BELT CLEANING (KM-7530) |
Парткод: | 36716610 |
Деталь: | REAR FILM, TRANSFER CLEANING (KM-7530) |
Парткод: | 2FA16060 |
Деталь: | SHIELD.DISPOSAL DUCT (KM-7530) |
Парткод: | 36716750 |
Деталь: | SEAL A, NOZZLE (KM-7530) |
Парткод: | 36716810 |
Деталь: | SEAL B,NOZZLE (KM-7530) |
Парткод: | 36716820 |
Деталь: | BRUSHJBELT CLEANING (KM-7530) |
Парткод: | 2A016040 |
Деталь: | GEAR 17,CLEANING IDLE (KM-7530) |
Парткод: | 36716850 |
Деталь: | REAR SPONGE, TRANSFER (KM-7530) |
Парткод: | 36716900 |
Деталь: | SPRING,CASSETTE (KM-7530) |
Парткод: | 48527520 |
Деталь: | FILM, TRANSFER (KM-7530) |
Парткод: | 36716930 |
Деталь: | GROUND PLATE.BELT CLEANING (KM-7530) |
Парткод: | 36716940 |
Деталь: | SEAL, CLEANING WIND SHIELD (KM-7530) |
Парткод: | 2A016130 |
Деталь: | SEAL,BELT CLEANING (KM-7530) |
Парткод: | 2A016120 |
Деталь: | BUSHING 6, CLEANING UNIT (KM-7530) |
Парткод: | 49028116 |
Деталь: | SPONGE B, CLEANING (KM-7530) |
Парткод: | 36718360 |
Деталь: | UPPER SEAL.DOCTOR BLADE (KM-7530) |
Парткод: | 63814660 |
Деталь: | GEAR36,PC CLUTCH (KM-7530) |
Парткод: | 45771201 |
Деталь: | BUSHING.6 REGISTRATION (KM-7530) |
Парткод: | 29806810 |
Деталь: | STOPPER 5,RING (KM-7530) |
Парткод: | 2BC06990 |
Деталь: | GEAR 16,SUB DEVUNIT (KM-7530) |
Парткод: | 75915120 |
Деталь: | SPIRAL,BELT CLEANING (KM-7530) |
Парткод: | 36716390 |
Деталь: | ELECTRODE, BRUSH (KM-7530) |
Парткод: | 36716411 |
Деталь: | REAR GUIDE, TRANSFER (KM-7530) |
Парткод: | 2FA16020 |
Деталь: | REAR BRUSH, TRANSFER CLEANING (KM-7530) |
Парткод: | 2FA16030 |
Деталь: | REAR HOLDER,BRUSH TRANSFER CLEANING (KM-7530) |
Парткод: | 2FA16040 |
Деталь: | FRONT POSITIONING PLATE,FIXING (KM-7530) |
Парткод: | 36720640 |
Деталь: | BUSHING 8,LOWER REG.ROLLER (KM-7530) |
Парткод: | 49028112 |
Деталь: | SPACER,BELT CLEANING (KM-7530) |
Парткод: | 36716800 |
Деталь: | BUSHING,SPIRAL (KM-7530) |
Парткод: | 72114530 |
Деталь: | STOPRING PAPER FEED PULLEY (KM-7530) |
Парткод: | 75706040 |
Деталь: | GUIDE,CONVEYING |
Парткод: | 3AL08033 |
Деталь: | LOWER SHAFT,CONVEYING PULLEY |
Парткод: | 3AL08190 |
Деталь: | LOWER PLATE SPRING,CONVEYING PULLEY |
Парткод: | 3AL08240 |
Деталь: | COVER,CONVEYING PULLEY |
Парткод: | 3AL08302 |
Деталь: | OUTER SHEETGUIDE CONVEYING |
Парткод: | 3AL08421 |
Деталь: | INNER SHEETGUIDE CONVEYING |
Парткод: | 3AL08430 |
Деталь: | FRONT PULLEY, READING |
Парткод: | 3AL08480 |
Деталь: | SHEETGUIDE PLATE EJECT |
Парткод: | 3AL08451 |
Деталь: | GUIDE,READING |
Парткод: | 3AL08072 |
Деталь: | SHEETORIGINAL HOLDER |
Парткод: | 3AL08401 |
Деталь: | LIGHT SHIELD,LOOP |
Парткод: | 3AL10073 |
Деталь: | MOUNT,LIGHT SHIELD |
Парткод: | 3AL10131 |
Деталь: | MOUNT,EJECT SOLENOID |
Парткод: | 3AL08310 |
Деталь: | SOLENOID,FEED SHIFT |
Парткод: | 3AL27080 |
Деталь: | BUSHING,6 |
Парткод: | 63806290 |
Деталь: | BUSH, 6 |
Парткод: | 73210450 |
Деталь: | RIGHT GUIDE,REGISTRATION |
Парткод: | 3BC08011 |
Деталь: | GUIDE PLATE,EJECT |
Парткод: | 3BC08020 |
Деталь: | INNER ROLLER,CONVEYING |
Парткод: | 3BC08150 |
Деталь: | SPRING,CONVEYING ROLLER |
Парткод: | 3BC22110 |
Деталь: | SPRING.LIGHT SHIELD |
Парткод: | 3AL10190 |
Деталь: | SENSOR,TIMING SWITCH |
Парткод: | 3C027020 |
Деталь: | PIN,ADF |
Парткод: | 63511541 |
Деталь: | INNER SHEETGUIDE CONVEYING LARGE |
Парткод: | 3AL08530 |
Деталь: | BEARING,686ZZNR |
Парткод: | 74808080 |
Деталь: | GUIDE,EJECT FEED SHIFT |
Парткод: | 3BC08160 |
Деталь: | LEVER,EJECT |
Парткод: | 3BC08081 |
Деталь: | LEVER,EJECT SOLENOID |
Парткод: | 3AL08341 |
Деталь: | MINIATURE CLAMP,UAMS-05-2 |
Парткод: | M2105720 |
Деталь: | UPPER ROLLER,CONVEYING |
Парткод: | 3AL08161 |
Деталь: | GEAR 24,JAM REMOVEMENT |
Парткод: | 3AL02150 |
Деталь: | LOWER ROLLER,CONVEYING |
Парткод: | 3AL08112 |
Деталь: | PULLEY 25/18P2M,PAPER FEED |
Парткод: | 18307370 |
Деталь: | GEAR Z18/T25P2M |
Парткод: | 3AL22040 |
Деталь: | BUSHING 6 |
Парткод: | 29806560 |
Деталь: | COLLAR DEVELOPING UNIT |
Парткод: | 75714210 |
Деталь: | GEAR 18,FUR BRUSH |
Парткод: | 33918100 |
Деталь: | PULLEY 18P2M,LEADING FEED |
Парткод: | 18307550 |
Деталь: | ROLLER,EJECT |
Парткод: | 3AL08130 |
Деталь: | TENSION PLATE,CONVEYING ROLLER |
Парткод: | 3BC22010 |
Деталь: | PULLEY,TIMING BELT |
Парткод: | 48928800 |
Деталь: | SPRING,DEV. SHUTTER |
Парткод: | 63814260 |
Деталь: | SPRING, SPIRAL ROLLER |
Парткод: | 72418480 |
Деталь: | PIN,PAPER FEED |
Парткод: | 3AL07230 |
Деталь: | LEFT GUIDE,REGISTRATION |
Парткод: | 3AL08013 |
Деталь: | GEAR 14,JAM REMOVEMENT |
Парткод: | 3AL02160 |
Деталь: | MOUNT, JAM REMOVEMENT DIAL |
Парткод: | 3AL02121 |
Деталь: | DIAL,JAM REMOVEMENT |
Парткод: | 3AL02110 |
Деталь: | GEAR 14,JOINT |
Парткод: | 3AL02170 |
Деталь: | MOUNT,CONVEYING PULLEY |
Парткод: | 3AL08280 |
Деталь: | INNER PLATE SPRING,CONVEYING PULLEY |
Парткод: | 3AL08250 |
Деталь: | INNER PULLEY,CONVEYING |
Парткод: | 3AL08100 |
Деталь: | INNER SHAFT, CONVEYING PULLEY |
Парткод: | 3AL08201 |
Деталь: | PIN,CLEANING BLADE |
Парткод: | 73918080 |
Деталь: | BINDING BAND SG-130 |
Парткод: | M2107120 |
Деталь: | ROLLER,REGISTRATION |
Парткод: | 3BC08050 |
Деталь: | MOUNT,TIMING SWITCH |
Парткод: | 3BC08071 |
Деталь: | SWITCH,FEED |
Парткод: | 35327400 |
Деталь: | BELT 112,REGISTRATION ROLLER |
Парткод: | 3BC22080 |
Деталь: | BELT 140,MIDDLE ROLLER |
Парткод: | 3BC22090 |
Деталь: | STOP RING E3 |
Парткод: | 65016080 |
Деталь: | LEFT COVER(B) |
Парткод: | 3C004080 |
Деталь: | LABEL,JAM REMOVEMENT |
Парткод: | 3AL05090 |
Деталь: | FRONT HOOK,LEFT COVER |
Парткод: | 3C007010 |
Деталь: | REAR HOOK,LEFT COVER |
Парткод: | 3C007020 |
Деталь: | UPPER PULLEY, CONVEYING |
Парткод: | 3AL08140 |
Деталь: | UPPER SHAFT,CONVEYING PULLEY |
Парткод: | 3AL08180 |
Деталь: | UPPER PLATE SPRING,CONVEYING PULLEY |
Парткод: | 3AL08220 |
Деталь: | PLATE SPRING,REGISTRATION GUIDE |
Парткод: | 3AL08270 |
Деталь: | STOPPER,LEFT COVER FRONT |
Парткод: | 3AL08360 |
Деталь: | STOPPER,LEFT COVER REAR |
Парткод: | 3AL08370 |
Деталь: | COVER.PAPER FEED |
Парткод: | 3C004070 |
Деталь: | LABEL,ORIGINAL SET |
Парткод: | 3AL05080 |
Деталь: | FRONT COVER |
Парткод: | 3C004010 |
Деталь: | REAR COVER |
Парткод: | 3C004020 |
Деталь: | RIGHT COVER |
Парткод: | 3C004060 |
Деталь: | MAT,ORIGINAL HOLDER |
Парткод: | 3AL04060 |
Деталь: | STOPPER,EJECT ORIGINAL |
Парткод: | 3C004030 |
Деталь: | FILM,ORIGINAL HOLDER |
Парткод: | 3AL04080 |
Деталь: | SUPPORT PLATE,COVER |
Парткод: | 63202120 |
Деталь: | LABEL,OPERATION |
Парткод: | 3AL05111 |
Деталь: | LABEL DP, OPERA TION(USA) |
Парткод: | 2CJ05090 |
Деталь: | HANDLE,HOOK |
Парткод: | 3C004040 |
Деталь: | SHAFT,HOOK |
Парткод: | 3AL07290 |
Деталь: | SPRING,CLEANING BLADE |
Парткод: | 72118141 |
Деталь: | PULLEY,REGISTRATION |
Парткод: | 3AL08500 |
Деталь: | LABEL,DF ORIGINAL CAUTION |
Парткод: | 3AL05120 |
Деталь: | LABEL,HINGE CAUTION |
Парткод: | 3C005020 |
Деталь: | RIGHT REINFORCEMENT, COVER |
Парткод: | 3C002010 |
Деталь: | C-PAPER REAR GIDE |
Парткод: | 5A707390 |
Деталь: | UPPER COVER,CASSETTE |
Парткод: | 2CJ06140 |
Деталь: | COVER,DECK |
Парткод: | 2CJ06160 |
Деталь: | CA-CASSETTE |
Парткод: | 5A707130 |
Деталь: | GUIDE,PAPER SIDE |
Парткод: | 2CJ06170 |
Деталь: | LIFT PLATE,MAIN |
Парткод: | 2CJ06010 |
Деталь: | FRONT LIFT PLATE,SUB |
Парткод: | 2CJ06020 |
Деталь: | REAR LIFT PLATE,SUB |
Парткод: | 2CJ06030 |
Деталь: | C-SFT-LIFT MAIN |
Парткод: | 5A707540 |
Деталь: | C-SFT-LIFT SUB |
Парткод: | 5A707550 |
Деталь: | GER-1.0-24 |
Парткод: | 51608690 |
Деталь: | LABEL,PAPER SUPPLY CAUTION |
Парткод: | 2A005141 |
Деталь: | AIR DAMPER |
Парткод: | 54106950 |
Деталь: | DAMPER SUPPORT |
Парткод: | 54107130 |
Деталь: | DAMPER MAT |
Парткод: | 54107330 |
Деталь: | C-ARBOR-64 |
Парткод: | 5A707160 |
Деталь: | C-SFT-PULLEY |
Парткод: | 5A707570 |
Деталь: | C-PICK PULLEY |
Парткод: | 5A707580 |
Деталь: | C-SP-PICK PULLEY60 |
Парткод: | 5A707680 |
Деталь: | C-SFT-DRIVING FULCRUM |
Парткод: | 5A707530 |
Деталь: | LIFT PULLEY |
Парткод: | 54106020 |
Деталь: | C-SFT-CAM |
Парткод: | 5A707560 |
Деталь: | BUSH-8P |
Парткод: | 5AA08420 |
Деталь: | RIGHT LIFT BELT ASSY |
Парткод: | 54106930 |
Деталь: | LEFT LIFT BELT ASSY |
Парткод: | 54106940 |
Деталь: | SLIDER MG |
Парткод: | 53310020 |
Деталь: | BKT-MG SLIDER |
Парткод: | 5A708030 |
Деталь: | MG SLIDER |
Парткод: | 5A708010 |
Деталь: | BKT-SLIDE GUIDE |
Парткод: | 5A708040 |
Деталь: | RUBBER,SIDE STOPPER |
Парткод: | 53310030 |
Деталь: | GROUND PLATE,CASSETTE |
Парткод: | 53310100 |
Деталь: | RETAINING PIN,DECK COVER |
Парткод: | 36707820 |
Деталь: | WASHER,DECK COVER |
Парткод: | 36707830 |
Деталь: | STOPPER.MAGNET |
Парткод: | 2CJ06180 |
Деталь: | C-BKT-LIFTER DRIVING |
Парткод: | 5A707210 |
Деталь: | C-CAM STOPPER |
Парткод: | 5A707220 |
Деталь: | BINDING TAP-TITE SCREW CVM3X8 |
Парткод: | 51608740 |
Деталь: | PARALLEL KEY 3X3X10 |
Парткод: | 54106740 |
Деталь: | LABEL,UPPER LIMIT |
Парткод: | 2A005150 |
Деталь: | LABEL,CASSETTE SIZE(INCH K M) |
Парткод: | 68205110 |
Деталь: | LABEL,CASSETTE SIZE(METRIC K M) |
Парткод: | 68205100 |
Деталь: | LABEL,PAPER(INCH) |
Парткод: | 2A005050 |
Деталь: | LABEL,PAPER(METRIC) |
Парткод: | 2A005040 |
Деталь: | FRONT MOUNT,COVER |
Парткод: | 2A007340 |
Деталь: | FRICTION PLATE,BYPASS |
Парткод: | 33906400 |
Деталь: | MOUNT,MAGNET |
Парткод: | 2A007321 |
Деталь: | HOLDER,RELEASE |
Парткод: | 2A007330 |
Деталь: | MAGNET,DECK |
Парткод: | 2A007880 |
Деталь: | PAD,DECK |
Парткод: | 2CJ06040 |
Деталь: | GUIDE,CASSETTE PAPER FEED |
Парткод: | 2A006160 |
Деталь: | REAR SEAL,CASSETTE |
Парткод: | 2CJ07200 |
Деталь: | GUIDEPAPER SIDE |
Парткод: | 2CJ06190 |
Деталь: | STATIC ELIMINATOR LCF.LIFT |
Парткод: | 2CJ06250 |
Деталь: | GUIDE, LIFT(METRIC) |
Парткод: | 2CJ06230 |
Деталь: | GUIDE.LIFT(INCH) |
Парткод: | 2CJ06240 |
Деталь: | FRONT POSITIONING PLATE,FIXING (KM-6330) |
Парткод: | 36720640 |
Деталь: | BEARING 686ZZ (KM-6330) |
Парткод: | G3001360 |
Деталь: | ROLLER,TRANSFER (KM-6330) |
Парткод: | 2A016020 |
Деталь: | PARTS,BELT TRANSFER(S P) (KM-6330) |
Парткод: | 36793281 |
Деталь: | BRUSH,BELT CLEANING (KM-6330) |
Парткод: | 2A016040 |
Деталь: | ROLLER,BELT DRIVE (KM-6330) |
Парткод: | 2CJ16010 |
Деталь: | ROLLER,MIDDLE (KM-6330) |
Парткод: | 2A016061 |
Деталь: | ROLLER,IDLE (KM-6330) |
Парткод: | 2A016070 |
Деталь: | BUSHING 8,LOWER REG.ROLLER (KM-6330) |
Парткод: | 49028112 |
Деталь: | BUSHING,MIDDLE ROLLER (KM-6330) |
Парткод: | 2A016100 |
Деталь: | FRONT ROLLER,TRANSFER (KM-6330) |
Парткод: | 2A016111 |
Деталь: | SPRING,CASSETTE (KM-6330) |
Парткод: | 48527520 |
Деталь: | BEARING 688ADD (KM-6330) |
Парткод: | 45592554 |
Деталь: | SEAL,BELT CLEANING (KM-6330) |
Парткод: | 2A016120 |
Деталь: | IDLE GEAR 22 (KM-6330) |
Парткод: | 45728115 |
Деталь: | BUSHING 6,CLEANING UNIT (KM-6330) |
Парткод: | 49028116 |
Деталь: | SPONGE B,CLEANING (KM-6330) |
Парткод: | 36718360 |
Деталь: | BUSHING,6 REGISTRATION (KM-6330) |
Парткод: | 29806810 |
Деталь: | STOPPER 5RING (KM-6330) |
Парткод: | 2BC06990 |
Деталь: | SPRING,TRANSFER (KM-6330) |
Парткод: | 35316030 |
Деталь: | BUSHING,IDLE ROLLER (KM-6330) |
Парткод: | 36716240 |
Деталь: | STAY,TRANSFER (KM-6330) |
Парткод: | 36716263 |
Деталь: | RETAINER,TRANSFER ROLLER (KM-6330) |
Парткод: | 36716271 |
Деталь: | ELECTRODE,TRANSFER (KM-6330) |
Парткод: | 36716290 |
Деталь: | ELECTRODE B,TRANSFER (KM-6330) |
Парткод: | 36716300 |
Деталь: | FRONT FRAME,TURN (KM-6330) |
Парткод: | 36716311 |
Деталь: | REAR FRAME,TURN (KM-6330) |
Парткод: | 36716321 |
Деталь: | GEAR 15,CLEANING DRIVE (KM-6330) |
Парткод: | 36716360 |
Деталь: | REAR GUIDE,TRANSFER (KM-6330) |
Парткод: | 36716383 |
Деталь: | SPIRAL,BELT CLEANING (KM-6330) |
Парткод: | 36716390 |
Деталь: | ELECTRODE,BRUSH (KM-6330) |
Парткод: | 36716411 |
Деталь: | PARTS,SEAL CLEANING(SP) (KM-6330) |
Парткод: | 36793670 |
Деталь: | LOWER SPONGE,BLADE (KM-6330) |
Парткод: | 36718400 |
Деталь: | HOUSING,BELT CLEANING (KM-6330) |
Парткод: | 36716481 |
Деталь: | NOZZLE,DISPOSAL (KM-6330) |
Парткод: | 36716490 |
Деталь: | SHUTTER,BELT CLEANING (KM-6330) |
Парткод: | 36716510 |
Деталь: | SHIELD A,SHUTTER (KM-6330) |
Парткод: | 36716530 |
Деталь: | SCRAPER,BELT CLEANING (KM-6330) |
Парткод: | 36716610 |
Деталь: | SPRING,TRANSFER ELECTRODE (KM-6330) |
Парткод: | 36716670 |
Деталь: | SHIELD,DISPOSAL DUCT (KM-6330) |
Парткод: | 36716750 |
Деталь: | SPACER,BELT CLEANING (KM-6330) |
Парткод: | 36716800 |
Деталь: | SEAL A,NOZZLE (KM-6330) |
Парткод: | 36716810 |
Деталь: | SEAL B,NOZZLE (KM-6330) |
Парткод: | 36716820 |
Деталь: | SUPPORT PLATE,TRANSFER (KM-6330) |
Парткод: | 36716840 |
Деталь: | GEAR 17,CLEANING IDLE (KM-6330) |
Парткод: | 36716850 |
Деталь: | REAR SPONGE,TRANSFER (KM-6330) |
Парткод: | 36716900 |
Деталь: | FILM,TRANSFER SPRING (KM-6330) |
Парткод: | 36716920 |
Деталь: | FILM,TRANSFER (KM-6330) |
Парткод: | 36716930 |
Деталь: | GROUND PLATE,BELT CLEANING (KM-6330) |
Парткод: | 36716940 |
Деталь: | SEAL,CLEANING WIND SHIELD (KM-6330) |
Парткод: | 2A016130 |
Деталь: | GROUND PLATE A,MIDDLE ROLLER (KM-6330) |
Парткод: | 2A016300 |
Деталь: | GROUND WIRE,TRANSFER BELT (KM-6330) |
Парткод: | 36727650 |
Деталь: | BUSHING,PRESSING ROLLER (KM-6330) |
Парткод: | 63520170 |
Деталь: | UPPER SEAL,DOCTOR BLADE (KM-6330) |
Парткод: | 63814660 |
Деталь: | GEAR36,PC CLUTCH (KM-6330) |
Парткод: | 45771201 |
Деталь: | BUSHING.SPIRAL (KM-6330) |
Парткод: | 72114530 |
Деталь: | STOPRING PAPER FEED PULLEY (KM-6330) |
Парткод: | 75706040 |
Деталь: | GEAR 16,SUB DEV.UNIT (KM-6330) |
Парткод: | 75915120 |
Деталь: | MOUNT,FEED SHIFT PULLEY (KM-6330) |
Парткод: | 68720170 |
Деталь: | PULLEY,FEED SHIFT (KM-6330) |
Парткод: | 68720160 |
Деталь: | BUSHING CLEANING UNIT (KM-6330) |
Парткод: | 74718091 |
Деталь: | SPRING,FIXING UNIT SOL (KM-6330) |
Парткод: | 48528213 |
Деталь: | TERMINAL A,DRIVE ROLLER (KM-6330) |
Парткод: | 2A016310 |
Деталь: | LABEL B,UNIT REPLACEMENT (KM-6330) |
Парткод: | 2BC05270 |
Деталь: | SCANNER DRIVE ASSAfY |
Парткод: | 2A301020 |
Деталь: | OPEN BUSHING,OCB-1000 |
Парткод: | M1203510 |
Деталь: | EDGING,EDS-17L(KITAGAWA) |
Парткод: | M2104250 |
Деталь: | MINIATURE CLAMP,UAMS-07-0 |
Парткод: | M2105730 |
Деталь: | BASE RUBBER,SCANNER SECTION |
Парткод: | 36512430 |
Деталь: | SPACER,KGLS-12RT |
Парткод: | M2108490 |
Деталь: | WIRE SADDLE,WS-2NS |
Парткод: | M2109010 |
Деталь: | WIRE SADDLE,LWS-3S(KITAGAWA) |
Парткод: | M2109230 |
Деталь: | PULLEY MOVING IDLE |
Парткод: | 18314080 |
Деталь: | FILM,FFC |
Парткод: | 2AR12200 |
Деталь: | PIN TENSION PULLEY |
Парткод: | 76610320 |
Деталь: | MIRROR HOLDER |
Парткод: | 75712080 |
Деталь: | MOUNT,RELEASE SWITCH |
Парткод: | 2AC12230 |
Деталь: | GUIDE,RELEASE SWITCH |
Парткод: | 2AC12360 |
Деталь: | SWITCH,RELEASE DETECTION |
Парткод: | 2AC12370 |
Деталь: | SPRING,RELEASE SWITCH |
Парткод: | 2AC12380 |
Деталь: | SWITCH,FEED |
Парткод: | 35327400 |
Деталь: | LOWER MIRROR FRAME A,SCANNER |
Парткод: | 2AC12121 |
Деталь: | REFLECTOR,SCANNER |
Парткод: | 2AC12130 |
Деталь: | MIRROR A |
Парткод: | 2AC12140 |
Деталь: | MIRROR B |
Парткод: | 2AC12150 |
Деталь: | MIRROR FRAME B |
Парткод: | 2AC12160 |
Деталь: | WIRE,SCANNER |
Парткод: | 2AC12170 |
Деталь: | ADJUSTING PLATE,SCANNER WIRE |
Парткод: | 2AC12180 |
Деталь: | SHAFT, SCANNER DRIVE |
Парткод: | 2AC12210 |
Деталь: | MOUNT,SCANNER MOTOR |
Парткод: | 2AC12250 |
Деталь: | LIGHT SHIELD,PI |
Парткод: | 2AC12261 |
Деталь: | GUIDE FFC1 |
Парткод: | 2AC12270 |
Деталь: | Holder FFC |
Парткод: | 2AC12300 |
Деталь: | ADJUSTING PLATE B,MIRROR FRAME |
Парткод: | 2AC12400 |
Деталь: | SPACER,RETAINING PIN |
Парткод: | 2AC12410 |
Деталь: | WIRE S,SCANNER |
Парткод: | 2AC12420 |
Деталь: | GROUND PLATE,INVERTER |
Парткод: | 2AC12440 |
Деталь: | PARTS,ASSY ISU(SP) (KM-6330) |
Парткод: | 2A093012 |
Деталь: | ISU ASSY (KM-7530) |
Парткод: | 2FA68030 |
Деталь: | WIRE,SCANNER INVERTER |
Парткод: | 2AV27200 |
Деталь: | LAMP,SCANNER |
Парткод: | 2BC12150 |
Деталь: | UPPER MIRROR FRAME A,SCANNER |
Парткод: | 2AC12110 |
Деталь: | COVER,INVERTER |
Парткод: | 2AC12240 |
Деталь: | MOTOR,SCANNER (KM-6330) |
Парткод: | 2A012060 |
Деталь: | MOTORSCANNER (KM-7530) |
Парткод: | 2FA12010 |
Деталь: | MOUNT,SCANNER PULLEY |
Парткод: | 2A012130 |
Деталь: | WIRE,SCANNER UNIT |
Парткод: | 2CJ27110 |
Деталь: | INVERTER PCB |
Парткод: | 2BC28120 |
Деталь: | COVER, ISU |
Парткод: | 2CJ12020 |
Деталь: | MOUNT BASE,ORIGINAL DETECTION SENSOR |
Парткод: | 2A312020 |
Деталь: | GROUND PLATE,LCD |
Парткод: | 18526340 |
Деталь: | WIRE,ORIGINAL SIZE DETECTION(INCH) |
Парткод: | 2A327350 |
Деталь: | WIRE,ORIGINAL SIZE DETECTION(METRIC) |
Парткод: | 2A327360 |
Деталь: | LABEL,CAUTION CONTACT GLASS |
Парткод: | 2A105180 |
Деталь: | BEARING,688ZZNR |
Парткод: | 28107400 |
Деталь: | HOLDER,WIRE ROPE |
Парткод: | 29912420 |
Деталь: | BELT 117,VERTICAL CONVEYING |
Парткод: | 33522100 |
Деталь: | PULLEY,SCANNER |
Парткод: | 2BC12120 |
Деталь: | STOPPER 5 |
Парткод: | 2BC06980 |
Деталь: | PULLEY,SCANNER DRUM |
Парткод: | 35912060 |
Деталь: | SPRING,MIRROR HOLDER |
Парткод: | 35912210 |
Деталь: | PULLEY,SCANNER DRIVE |
Парткод: | 35912340 |
Деталь: | GUIDE FFC2 |
Парткод: | 35912360 |
Деталь: | SENSOR,ORIGINAL DETECTION |
Парткод: | 35927290 |
Деталь: | SLIDER,SCANNER |
Парткод: | 2AV12450 |
Деталь: | UPPER FILM,SCANNER |
Парткод: | 2BC12160 |
Деталь: | MOUNT,SCANNER SWITCH |
Парткод: | 66212080 |
Деталь: | PI SWITCH,OPTICAL SECTION |
Парткод: | 72127100 |
Деталь: | GROUND PLATE,STAY DRUM (KM-6330) |
Парткод: | 36708090 |
Деталь: | GROUND PLATE, STAY DRUM (KM-7350) |
Парткод: | 36708090 |
Деталь: | TENSION SPRING,SCANNER WIRE |
Парткод: | 72112520 |
Деталь: | GROUND PLATE A,NOISE |
Парткод: | 18526211 |
Деталь: | CORE 7-15X18 |
Парткод: | 33927590 |
Деталь: | CLAMP,GNK-2N(NIKKO) |
Парткод: | M2505170 |
Деталь: | MOUNT,DF CONNECTOR |
Парткод: | 2CJ26100 |
Деталь: | SHIELD A,GASKET |
Парткод: | 2CJ27130 |
Деталь: | MOUNT, INNER COVER |
Парткод: | 2CJ25060 |
Деталь: | GROUND WIRE.COVER CCD (KM-7530) |
Парткод: | 2FA27080 |
Деталь: | GROUND PLATELCD (KM-7530) |
Парткод: | 18526340 |
Деталь: | SPRING,SCANNER DRIVE SHAFT (KM-7530) |
Парткод: | 2FA12020 |
Деталь: | EDGING,EDS-0607M(KITAGAWA) |
Парткод: | M2104350 |
Коды ошибок
C0100
C0110
C0210
C0240
C0250
C0420
C0440
C0610
C0630
C0640
C1030
C1040
C1050
C1060
C1140
C1150
C2000
C2500
C2550
C2640
C3100
C3300
C4000
C4010
C4100
C4110
C4200
C5100
C5500
C5510
C5600
C5610
C6000
C6020
C6030
C6050
C6400
C7100
C7300
C7500
C7520
C7530
C7800
C7810
C8010
C8020
C8030
C8040
C8140
C8150
C8170
C8180
C8190
C8210
C8220
C8230
C8240
Описание
Error code: | C0100 |
Description: | Charge corona winding problem |
Causes: | An abnormal status is output from the flash memory. |
Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. If not repaired, replace the main PWB. |
Error code: | C0110 |
Description: | Backup memory data problem (main PWB) • Data in the specified area of the backup memory does not match the specified values. |
Causes: | Problem with the backup memory data. Defective main PWB. |
Remedy: | Problem with the backup memory data. Run maintenance item U021 to set the contents of the backup memory data again. Defective main PWB. If the C0110 is displayed after initializing the backup memory, replace the main PWB and check for correct operation. |
Error code: | C0210 |
Description: | CPU communication problem • Synchronization cannot be taken between the main CPU and engine CPU. |
Causes: | Defective main PWB. Poor contact in the connector terminals. Defective engine PWB. |
Remedy: | Defective main PWB. Replace the main PWB. Poor contact in the connector terminals. Check the connection of connector YC1 on the main PWB and YC1 on the engine PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
Error code: | C0240 |
Description: | Printer board* communication problem • The printer board does not respond 120 seconds after the power is turned on. |
Causes: | Poor contact in the connector terminals. DIMM installed incorrectly. Defective main PWB or printer board. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC9 on the main PWB and YC5 on the printer board, and the continuity across the connector terminals. Repair or replace if necessary. DIMM installed incorrectly. Check the connection. Repair or replace if necessary. Defective main PWB or printer board. Replace the main PWB or printer board and check for correct operation. |
Error code: | C0250 |
Description: | Network scanner board* communication problem • The response to the alive command to the network scanner transmitted once to 30 s does not come on the contrary three consecutive times or more. • The response to the communication command transmitted to the network scanner does not return 75 s or more. |
Causes: | Poor contact in the connector terminals. Defective main PWB or network scanner board. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC3 on the main PWB and the connector on the network scanner board, and the continuity across the connector terminals. Repair or replace if necessary. Defective main PWB or network scanner board. Replace the main PWB or network scanner board and check for correct operation. |
Error code: | C0420 |
Description: | Side feeder* communication error • A communication error from side feeder is detected 10 times in succession. |
Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective side feeder main PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC15 on the engine PWB and the connector YC3 on the side feeder main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective side feeder main PWB. Replace the side feeder main PWB. |
Error code: | C0440 |
Description: | Document finisher communication problem • A communication error from document finisher is detected 10 times in succession. |
Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective finisher main PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC14 on the engine PWB and YC4 on the finisher main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective finisher main PWB. Replace the finisher main PWB. |
Error code: | C0610 |
Description: | Lens drive problem |
Causes: | Defective main PWB. |
Remedy: | Replace the main PWB and check for correct operation. |
Error code: | C0630 |
Description: | DMA error |
Causes: | DMA transmission of the image data does not finish within the certain time. |
Remedy: | 1 Checking the connection 0 0 2 Checking the connection 0 0 3 Replacing the wire The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • DPCIS - DP relay PWB • DP relay PWB - Main PWB Wiring diagram 4 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. Detaching and reattaching the DP relay PWB 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
Error code: | C0640 |
Description: | Hard Disk error |
Causes: | The HDD cannot be accessed properly. |
Remedy: | 1 (When abnormal sounds occur) Replacing the HDD The HDD is faulty. Replace the HDD when the abnormal sounds are from the HDD. Detaching and reattaching the HDD 2 Checking the connection The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the following SATA cable or the terminal of the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • HDD - Main PWB Wiring diagram 3 Initializing the HDD The HDD storage data is faulty. Execute U024 [HDD Format] > [FULL]. Executing U024 4 Replacing the HDD The HDD is faulty. Replace the HDD. Detaching and reattaching the HDD 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
Error code: | C1030 |
Description: | Lift motor 3 error • When cassette 3 is inserted, lift limit switch 3 does not turn on within 33 s of lift motor 3 turning on. This error is detected four times successively. • During copying, lift limit switch 3 does not turn on within 1 s of lift motor 3 turning on. This error is detected four times successively. |
Causes: | Broken gears or couplings of lift motor 3. Defective lift motor 3. Poor contact of lift motor 3 connector terminals. Defective lift limit switch 3. Poor contact of lift limit switch 3 connector terminals. Defective casette PWB. |
Remedy: | Broken gears or couplings of lift motor 3. Replace lift motor 3. Defective lift motor 3. Check for continuity across the coil. If none, replace lift motor 3. Poor contact of lift motor 3 connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective lift limit switch 3. Run maintenance item U031 and turn lift limit switch 3 on and off manually. Replace lift limit switch 3 if indication of the corresponding sensor on the touch panel is not displayed in reverse. Poor contact of lift limit switch 3 connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective casette PWB. Replace the casette PWB |
Error code: | C1040 |
Description: | Lift motor 4 error • When cassette 4 is inserted, lift limit switch 4 does not turn on within 33 s of lift motor 4 turning on. This error is detected four times successively. • During copying, lift limit switch 4 does not turn on within 1 s of lift motor 4 turning on. This error is detected four times successively. |
Causes: | Broken gears or couplings of lift motor 4. Defective lift motor 4. Poor contact of lift motor 4 connector terminals. Defective lift limit switch 4. Poor contact of lift limit switch 4 connector terminals. Defective casette PWB. |
Remedy: | Broken gears or couplings of lift motor 4. Replace lift motor 4. Defective lift motor 4. Check for continuity across the coil. If none, replace lift motor 4. Poor contact of lift motor 4 connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective lift limit switch 4. Run maintenance item U031 and turn lift limit switch 4 on and off manually. Replace lift limit switch 4 if indication of the corresponding sensor on the touch panel is not displayed in reverse. Poor contact of lift limit switch 4 connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective casette PWB. Replace the casette PWB. |
Error code: | C1050 |
Description: | PF lift motor error Object: Side multi feeder |
Causes: | [Side multi feeder] The lift error continued 5 times because of one of the phenomena below. 1. The PF lift sensor does not turn on when passing 12s while the PF lift motor turns on for the first time after installing the cassette 2. The PF lift sensor does not turn on when passing 2s while the PF lift motor turns on for the second time or later after insetting the cassette. 3. The lift excess current protection monitor signal turning on is detected for 1s or more while the PF lift motor is operating. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor - PF main PWB Wiring diagram 4 Checking the PF lift motor The PF lift motor is faulty. Replace the PF lift motor. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift sensor - PF main PWB Wiring diagram 6 Checking the sensor The PF lift sensor is not properly attached or faulty. Reattach the PF lift sensor. If not repaired, replace the sensor. 7 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) |
Error code: | C1060 |
Description: | PF lift motor 1 error Object: Side multi feeder + Large capacity feeder, or Side multi feeder + Paper feeder |
Causes: | [Paper feeder or large capacity feeder] The lift error occurred 5 times because one if the below phenomenon. 1. The PF lift sensor1 does not turn ON even passing 12s (paper feeder), 23s (large capacity feeder) at the first time the PF lift motor1 ON after inserting the cassette. 2. The PF lift sensor1 does not turn ON even passing 2s at the second time the PF lift motor1 ON or later after inserting the cassette. 3. Detect the lift excess current protection monitor signal ON for more than 1s during the PF lift motor1 operates. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the lift motor drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor 1 - PF main PWB Wiring diagram 4 Replacing PF lift motor 1 PF lift motor 1 is faulty. Replace PF lift motor 1. Detaching and reattaching the PF lift motor 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift sensor 1 - PF main PWB Wiring diagram 6 Checking the sensor PF lift sensor 1 is not properly attached or faulty. Reattach PF lift sensor 1. If not repaired, replace the sensor. 7 (When installing the paper feeder) Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Paper feeder) Detaching and reattaching the PF main PWB (Paper feeder) 8 (When installing the large capacity feeder) Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Large capacity feeder) Detaching and reattaching the PF main PWB (Large capacity feeder) |
Error code: | C1140 |
Description: | PF lift motor error Object: Side feeder |
Causes: | 1. The PF lift upper limit sensor does not turn on when passing 30s after cassette 5 is inserted. 2. The lock-up signal is detected for 200ms continuously during the PF lift motor operation. 3. The PF lift upper limit sensor does not turn on when passing 2s after the upper limit control when printing starts. |
Remedy: | 1 Checking the bottom plate The bottom plate does not operate properly. Repair or replace the bottom plate when it does not move vertically. 2 Checking the drive gear The drive gear to lift up the bottom plate does not rotate properly. Check if the drive gears to lift up the bottom plate rotate smoothly or have no excessive load. And apply the grease to the frictional parts and fix the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor - PF main PWB Wiring diagram 4 Checking the PF lift motor The PF lift motor is faulty. Replace the PF lift motor. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift upper limit sensor - PF main PWB Wiring diagram 6 Checking the PF lift upper limit sensor The PF lift upper limit sensor is not properly attached or faulty. Reattach the PF lift upper limit sensor. Then, replace it if it is not fixed. 7 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. Detaching and reattaching the PF main PWB |
Error code: | C1150 |
Description: | Side feeder lift motor going down error (optional side feeder) • Lower limit detection switch does not turn off within 15 s of the side feeder lift motor starting (within 200 ms during paper feeding). This error is detected four times successively. |
Causes: | Poor contact of lower limit detection switch connector terminals. Defective side feeder main PWB. Defective side feeder lift motor. |
Remedy: | Poor contact of lower limit detection switch connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective side feeder main PWB. Replace the side feeder main PWB. Defective side feeder lift motor. Run maintenance mode U247 and measure the voltage between terminals YC5-A12 (side-feeder main circuit board) and YC6- B11. (Make sure all of LUSSW, UCSSW, LLSSW and RCSSW are off.) Despite either DC24V or DC-24V is observed but if the side-feeder lift motor does not operate, replace the side-feeder lift motor. |
Error code: | C2000 |
Description: | Drive motor problem Stable OFF is detected for 1 s continuously after drive motor stability. The drive motor is not stabilized in 6 s since the motor is activated. |
Causes: | Poor contact in the connector terminals. Defective drive transmission system. Defective drive motor. Defective engine PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and the connector on the drive motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective drive motor. Replace the drive motor. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | C2500 |
Description: | Feed motor error |
Causes: | The ready signal is not at the L level after passing 2s since the feed motor drive was started. |
Remedy: | 1 Checking the feed motor The operation of the feed motor is faulty. Execute U030 [Feed] to check the feed motor operation. Check if the drive gears rotate and have no excessive load, and apply the grease (EM-LP, Part no: 7BG010009H) to the sliding section and repair the related parts so that they can rotate smoothly. Maintenanc e Mode List 2 Checking the connection The connector is not connected properly, or the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Feed motor - Feed drive PWB • Feed drive PWB - Engine PWB Service Manual - Section 8 `PWBs` 3 Replacing the feed motor The feed motor is faulty. Replace the feed motor. 4 Replacing the feed drive unit The feed drive unit is faulty. Replace feed drive unit. Detaching and reattaching the Feed Drive Unit 5 Replacing the feed drive PWB The feed drive PWB is faulty. Replace the feed drive PWB. 6 Firmware upgrade The firmware is faulty. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the Engine PWB 8 Replacing the feed image PWB The power can`t be supplied to the feed drive PWB. Replace the feed image PWB. |
Error code: | C2550 |
Description: | Transfer motor error |
Causes: | 1. The ready signal is not at the L level (stable rotation) when passing 2s after the transfer motor drive starts. 2. The ready signal is at the H level for 1s continuously during the transfer motor drive. |
Remedy: | 1 Checking the transfer motor The transfer motor operation is faulty. Check if the transfer belt and the drive gears rotate smoothly or have no excessive load. Apply grease to the frictional parts and repair the parts. 2 Checking the conveying unit The drawer connector connection between the conveying unit and the main unit is faulty. Firmly close the conveying unit. If there are foreign objects or the deformation on the drawer connector of the conveying unit for connecting to the main unit, repair them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Transfer motor - Relay PWB • Relay PWB - Feed PWB • Feed PWB - Engine PWB 4 Replacing the transfer motor The transfer motor is faulty. Replace the transfer motor. 5 Replacing the transfer belt unit The transfer belt unit is faulty. Replace the transfer belt unit. Detaching and reattaching the transfer belt unit 6 Replacing the relay PWB The relay PWB is faulty. Replace the relay PWB. 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C2640 |
Description: | PF feed motor error (Side Feeder) |
Remedy: | 1 Checking the PF conveying motor The PF conveying motor is not properly connected. The drive parts are faulty. Execute U247 [Side Deck] > [Motor On] to check the paper feeding operation. If the PF conveying motor does not properly operate, reconnect the connector. Check if the PF feed roller and the drive gears rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. Executing U247 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF conveying motor - PF main PWB • PF main PWB - Engine PWB (Cable from the side feeder) Wiring diagram 4 Replacing the PF conveying motor The PF conveying motor is faulty. Replace the PF conveying motor. Detaching and reattaching the PF drive unit (Side feeder ) 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side feeder firmware to the latest version. Firmware Update 6 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side feeder) Detaching and reattaching the PF main PWB (Side feeder) 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3100 |
Description: | Carriage error |
Causes: | When turning the power on or finishing originals scan through the scanner, the alignment of the home position sensor (turning on / off the sensor) fails and the error is detected. Then, the error is detected twice continuously even the initial operation is executed. |
Remedy: | 1 Unlocking the scanner mirror frame The scanner mirror frame is not unlocked. Unlock the scanner mirror frame (lamp unit assy). Unlocking the scanner mirror frame 2 Checking the scanner movement A load is applied to the scanner movement. Check the operation of the lamp by U073 or manually moving it. If there is an excess load, check if there are any foreign objects on the optical wire or optical wire drum and clean it. After that, apply grease on the scanner rail. Detaching and reattaching the scanner wires 3 Checking the scanner wires The scanner wires are dirty or come off. Clean and reattach the scanner wires. Detaching and reattaching the scanner wires 4 Checking the scanner motor The scanner motor is faulty. Reattach the scanner motor and reconnect the connector. If not repaired, replace it. 5 Checking the belt tension of the scanner motor A load is applied to the scanner movement since the belt tension is improper. Adjust the scanner motor belt tension properly. 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Scanner motor - Engine PWB Wiring diagram 7 Checking the home position sensor The home position sensor is not properly attached. Reattach the home position sensor. 8 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Home position sensor - Engine PWB Wiring diagram 9 Replacing the home position sensor The home position sensor is faulty. Replace the home position sensor. 10 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 11 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3300 |
Description: | CCD AGC error (For the internal count) |
Causes: | Brightness of the LED lamp is darker while one of the LED lamp does not turn on or brighter than expected when processing the AGC for the CCD lamp. |
Remedy: | 1 Checking the LED lamp The LED lamp is faulty. Check if the LED lamp lights by executing U061 [CCD]. If it does not light, replace the lamp unit and execute U411 [Table (ChartA) ]. Detaching and reattaching the lamp unit 2 Cleaning the backside of the contact glass The white reference sheet is dirty. Clean the white reference sheet at the backside of the contact glass. Detaching and reattaching the contact glass 3 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is peeled off, deformed or the FFC is broken, replace the FFC. • LED PWB - CCD PWB • CCD PWB - Engine PWB Wiring diagram 4 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 5 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4000 |
Description: | Polygon motor synchronization problem • The revolution does not reach the stable speed within 20 s of the START signal. |
Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
Error code: | C4010 |
Description: | Polygon motor steady-state problem • The polygon motor rotation is not stable for 5 s after the polygon motor rotation has been stabilized. |
Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
Error code: | C4100 |
Description: | Exposure lamp stays on |
Causes: | Defective laser scanner unit. Defective main PWB. Poor contact in connector terminals. |
Remedy: | Defective laser scanner unit. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB. Repair or replace if necessary. |
Error code: | C4110 |
Description: | BD initialization (B) problem • When power is turned on, only laser B is output and ASIC of main PWB detects a BD error for 2000 ms. |
Causes: | Defective laser scanner unit. Defective main PWB. Poor contact in connector terminals. |
Remedy: | Defective laser scanner unit. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB and the continuity across the connector terminals. Repair or replace if necessary. |
Error code: | C4200 |
Description: | BD steady-state problem • ASIC of the main PWB detects a BD error A for 4000 ms after the polygon motor rotation has been stabilized. |
Causes: | Defective laser diode. Defective polygon motor. Defective main PWB. Poor contact in connector terminals. |
Remedy: | Defective laser diode. Replace the laser scanner unit. Defective polygon motor. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB and the continuity across the connector terminals. Repair or replace if necessary. |
Error code: | C5100 |
Description: | Main high-voltage error • While the main high-voltage output remote signal is on, an alarm signal is detected continuously for 400 ms. |
Causes: | Defective high voltage PWB. Leak of main high-voltage. Poor contact in connector terminals. |
Remedy: | Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Leak of main highvoltage. Check the main charger unit and replace if necessary. Poor contact in connector terminals. Check the connection of connector YC7 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. |
Error code: | C5500 |
Description: | Drum surface potential sensor problem 1 • The sensor output is 0.5 V or less when MC REM signal is turned on. |
Causes: | Poor contact in the drum surface potential sensor connector terminals. Defective drum surface potential sensor. Defective high voltage PWB. Defective engine PWB. |
Remedy: | Poor contact in the drum surface potential sensor connector terminals. Check the connection of connector YC5 on the engine PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective drum surface potential sensor. Replace the drum surface potential sensor. Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | C5510 |
Description: | Drum surface potential sensor problem 2 • The sensor output is 4.5 V or more when the MC REM signal is turned on. |
Causes: | Defective drum surface potential sensor. Defective high voltage PWB. Poor contact in the drum surface potential sensor. |
Remedy: | Defective drum surface potential sensor. Replace the drum surface potential sensor. Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Poor contact in the drum surface potential sensor. Check the connection of connector YC5 on the engine PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. |
Error code: | C5600 |
Description: | Drum surface potential problem 1 • The sensor output is 4.5 V or more. • Potential adjustment in 30 times could not raise the potential sensor value to the predetermined. |
Causes: | Deteriorated main charger. Grid or main charger shield is dirty. Defective drum surface potential sensor. Defective high voltage PWB. Defective engine PWB. |
Remedy: | Deteriorated main charger. Check the main charger wire and replace it if necessary. Grid or main charger shield is dirty. Clean the grid or main charger shield if necessary. Defective drum surface potential sensor. Replace the drum surface potential sensor. Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Defective engine PWB. Replace the engine PWB and check for correct operation. |
Error code: | C5610 |
Description: | Drum surface potential problem 2 • The sensor output is 0.5 V or less. • Potential adjustment in 30 times could not lower the potential sensor value to the predetermined. |
Causes: | Defective drum surface potential sensor. Defective high voltage PWB. Defective drum. Defective engine PWB. |
Remedy: | Defective drum surface potential sensor. Replace the drum surface potential sensor. Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Defective drum. Replace the drum. Defective engine PWB. Replace the engine PWB. |
Error code: | C6000 |
Description: | IH heating error 1 |
Causes: | The fuser center thermistor temperature does not reach 100°C / 212°F when passing 60s since warm-up starts. Or, the ready display temperature is not detected when passing 420s since the fuser center thermistor temperature reaches 100°C / 212°F during warm-up. |
Remedy: | 1 Executing U169 The IH setting mismatches the power source specification. Set the fuser destination same as the IH PWB voltage at U169. Executing U169 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature cannot be detected properly due to the broken thermostat or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the current PWB The current PWB is faulty. Replace the current PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. |
Error code: | C6020 |
Description: | Fuser center thermistor high temperature error |
Causes: | The fuser center thermistor detects 240°C / 464°F or more for 1s. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the thermistor error, etc. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6030 |
Description: | Fuser center thermistor broken |
Causes: | The output from the fuser center thermistor is under 20°C / 68°F level during warm-up. Or, the temperature detected at the fuser center thermistor does not change for 10s after turning the fuser heater on. |
Remedy: | 1 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 5 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6050 |
Description: | Fuser center thermistor low temperature error |
Causes: | The fuser center thermistor detects less than 100°C / 212°F for 1s after warm-up, or during print or standby. |
Remedy: | 1 Changing the wall outlet The power voltage descends by 10% or more of the rated voltage when printing. Connect the power cord to a different wall outlet if the power supply voltage descends by 10% or more of the rated voltage. 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 10 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 11 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit |
Error code: | C6400 |
Description: | Zero-cross signal error • The engine PWB does not detect the zero-crossing signal (Z CROSS SIG) for 5 s. |
Causes: | Poor contact in the connector terminals. Defective DC power source PWB. Defective engine PWB |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and YC6 on the DC power source PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective DC power source PWB. Check if the zero-crossing signal is output from YC6-3 on the DC power source PWB. If not, replace the DC power source PCB. Defective engine PWB. Replace the engine PWB if C6400 is detected while YC6-3 on the DC power source PWB outputs the zero-crossing signal. |
Error code: | C7100 |
Description: | Toner container motor error The rated speed achievement signal does not turn to L within 2 s since toner container motor is activated. The rated speed achievement signal is at the H level for 1 s continuously after toner container motor is stabilized. |
Causes: | Poor contact in the connector terminals. Defective drive transmission system. Defective toner container motor Defective engine PWB. |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC26 on the engine PWB and the connector on the toner container motor, and the continuity across the connector terminals. Repair or replace if necessary. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective toner container motor. Run maintenance item U030 and check if the toner container motor operates when YC26-A7 (remote signal) on the engine PWB goes low. If not, replace the toner container motor. Defective engine PWB. Run maintenance item U030 and check if YC26-A7 (remote signal) on the engine PWB goes low. If not, replace the engine PWB. |
Error code: | C7300 |
Description: | Toner hopper problem • During toner replenishment after toner empty has been detected, toner empty could not be cleared in 3 times of 360 s. |
Causes: | Defective toner level detection sensor. Poor contact in the toner level detection sensor connector terminals. |
Remedy: | Defective toner level detection sensor. Replace the toner level detection sensor. Poor contact in the toner level detection sensor connector terminals. Check the connection of connectors YC2 and YC5 on the deck PWB and YC3 on the engine PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. |
Error code: | C7500 |
Description: | Broken drum thermistor wire • The drum thermistor input voltage is 4.5 V or more when the front cover is closed. |
Causes: | Broken drum thermistor wire. Poor contact in the drum thermistor connector terminals. |
Remedy: | Measure the resistance. If it is ∞Ω, replace the drum thermistor. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. |
Error code: | C7520 |
Description: | Shorted drum thermistor • The drum thermistor input voltage is 1.2 V or less when the front cover is closed. |
Causes: | Broken drum thermistor wire. Defective main PCB. |
Remedy: | Measure the resistance. If it is 0 Ω , replace the drum thermistor. Replace the main PCB and check for correct operation. |
Error code: | C7530 |
Description: | Broken drum heater wire • The drum temperature does not change within 5 minutes of the drum heater turning on. |
Causes: | Broken drum heater wire. Poor contact in the drum heater connector terminals. |
Remedy: | Check for continuity within the drum heater. If none, replace the drum heater. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. |
Error code: | C7800 |
Description: | Outer thermistor broken (For the internal count) |
Causes: | The external temperature sensor (external thermistor) cannot be accessed. No response is received from the external thermistor 5 times continuously for 5ms or more when accessing the external thermistor. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Room temperature sensor - Front PWB?• Front PWB - Engine PWB Wiring diagram 2 Replacing the external temperature sensor The external temperature sensor is faulty. Replace the external temperature sensor. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7810 |
Description: | Short-circuited external thermistor • The thermistor input value is 0.5 V or less. |
Causes: | Poor contact in the connector terminals. Defective humidity sensor. Defective engine PWB |
Remedy: | Poor contact in the connector terminals. Check the connection of connector YC13 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective humidity sensor. Replace the humidity sensor. Defective engine PWB. Replace the engine PWB. |
Error code: | C8010 |
Description: | Punch motor error 1 Object: 4000-sheet finisher + Punch unit |
Causes: | 1. The punch home position sensor does not turn on when passing 200ms after driving the punch motor. 2. The pulse plate does not count the specified pulse when passing 300ms after the punch operation starts. |
Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • Punch home position sensor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. 5 Checking the punch home position sensor The punch home position sensor is not properly attached or faulty. Execute U241 [Punch] > [Punch HP]. If the PH home position sensor does not properly operate, reattach it. If not repaired, replace the sensor. Executing U241 6 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 7 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8020 |
Description: | Punch motor error 2 Object: 4000-sheet finisher + Punch unit |
Causes: | The home position is not aligned within 3s when initializing the home position or standby. |
Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. Executing U240 5 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 6 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8030 |
Description: | Punch motor error 3 Object: 4000-sheet finisher + Punch unit |
Causes: | The home position detection does not turn off within 50ms when initializing the home position. |
Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. Executing U240 5 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 6 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8040 |
Description: | Document finisher lower paper conveying belt problem • During initialization, the intermediate tray lower sliding plate is not detected in the home position within 3 s after the belt returns to the home position. JAM87 is indicated the first time this problem occurs. If the problem reoccurs after initialization when the front cover is opened and closed, the problem is in the lower paper conveying belt. • When the intermediate tray lower sliding plate is operated from the home position, the lower paper conveying belt home position sensor does not turn off within 1 s. |
Causes: | Phase shift of the lower paper conveying belt. Malfunction of the lower paper conveying belt motor. Malfunction of the lower paper conveying belt home position sensor. Loose connection of the lower paper conveying belt home position sensor connector. Incorrect insertion of the intermediate tray. Defective finisher main PWB. |
Remedy: | Phase shift of the lower paper conveying belt. Correct the phase of the lower paper conveying belt and check for correct operation. Malfunction of the lower paper conveying belt motor. Replace the lower paper conveying belt motor and check for correct operation. Malfunction of the lower paper conveying belt home position sensor. Replace the lower paper conveying belt home position sensor and check for correct operation. Loose connection of the lower paper conveying belt home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Incorrect insertion of the intermediate tray. Check whether the intermediate tray catches are damaged. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation. |
Error code: | C8140 |
Description: | Main tray error 1 Object: 4000-sheet finisher |
Causes: | DF tray sensor 1 or 2, or , DF tray upper surface sensor 1 or 2 does not turn on when passing 30s while lifting up the main tray. |
Remedy: | 1 Checking the main tray The main tray is not properly assembled. If the main tray does not move up and down manually, repair the part that restricts the operation. 2 Checking the drive parts The main tray drive parts are not properly attached or faulty. Reattach the main tray drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray motor - DF main PWB Wiring diagram 4 Replacing the DF tray motor The DF tray motor is faulty. Execute U240 [Motor] > [Tray]. If the DF tray motor does not properly operate, replace it. Executing U240 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray sensor 1 - DF main PWB • DF tray sensor 2 - DF main PWB • DF tray upper surface sensor 1 - DF main PWB • DF tray upper surface sensor 2 - DF main PWB Wiring diagram 6 Checking DF tray sensor 1, 2 DF tray sensor 1 or 2 is not properly attached or faulty. Reattach DF tray sensor 1 or 2 and execute U241 [Finisher] > [Tray U-Limit] or [Tray HP2]. If the sensor does not properly operate, replace it. Executing U241 7 Checking DF tray upper side sensor 1, 2 DF tray upper surface sensor 1 or 2 is not properly attached or faulty. Reattach DF tray upper surface sensor 1 or 2 and execute U241 [Finisher] > [Tray Top]. If the sensor does not properly operate, replace it. Executing U241 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8150 |
Description: | Main tray error 2 Object: 4000-sheet finisher |
Causes: | DF tray sensor 1 or 2, or , DF tray upper surface sensor 1 or 2 do not turn on and off when passing 5s when the main tray descends. |
Remedy: | 1 Checking the main tray The main tray is not properly assembled. If the main tray does not move up and down manually, repair the part that restricts the operation. 2 Checking the drive parts The main tray drive parts are not properly attached or faulty. Reattach the main tray drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray motor - DF main PWB Wiring diagram 4 Replacing the DF tray motor The DF tray motor is faulty. Execute U240 [Motor] > [Tray]. If the DF tray motor does not properly operate, replace it. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray sensor 1 - DF main PWB • DF tray sensor 2 - DF main PWB • DF tray upper surface sensor 1 - DF main PWB • DF tray upper surface sensor 2 - DF main PWB Wiring diagram 6 Checking DF tray sensor 1, 2 DF tray sensor 1 or 2 is not properly attached or faulty. Reattach DF tray sensor 1 or 2 and execute U241 [Finisher] > [Tray U-Limit] or [Tray HP2]. If the sensor does not properly operate, replace it. Executing U241 7 Checking DF tray upper side sensor 1, 2 DF tray upper surface sensor 1 or 2 is not properly attached or faulty. Reattach DF tray upper surface sensor 1 or 2 and execute U241 [Finisher] > [Tray Top]. If the sensor does not properly operate, replace it. Executing U241 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8170 |
Description: | DF side registration motor 1 error 1 Object: 4000-sheet finisher |
Causes: | The home position cannot be detected after passing 3s when relocating to the home position. |
Remedy: | 1 Checking the front DF side registration guide The front DF side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB Wiring diagram 4 Replacing DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. 5 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8180 |
Description: | DF side registration motor 1 error 2 Object: 4000-sheet finisher |
Causes: | J6810/J6811/J6812 (Front DF side registration jam) was detected 2 times continuously. |
Remedy: | 1 Checking the front DF side registration guide The front side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive components. 3 Replacing the front DF side registration guide drive components The front DF side registration guide drive components are faulty. Replace the front DF side registration guide drive components. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB 5 Checking DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. Executing U240 6 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8190 |
Description: | DF side registration motor 2 error 1 Object: 4000-sheet finisher |
Causes: | The home position is not detected when passing 3s while executing the operation of returning to the home position. |
Remedy: | 1 Checking the rear DF side registration guide The rear DF side registration guide is not assembled properly. If the rear DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the rear DF side registration guide drive components The rear DF side registration guide drive parts are not properly attached or faulty. Reattach the rear DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 2 - DF main PWB • DF side registration sensor 2 - DF main PWB 4 Replacing DF side registration motor 2 DF side registration motor 2 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 2 does not properly operate, replace it. Executing U240 5 Checking DF side registration sensor 2 DF side registration sensor 2 is not properly attached or faulty. Reattach DF side registration sensor 2 and execute U241 [Finisher] > [Width Tail HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8210 |
Description: | DF staple motor front/rear error Object: 4000-sheet finisher |
Causes: | The home position is not detected when passing 3s while returning to the home position at the initial operation. |
Remedy: | 1 Checking the DF staple unit The DF staple unit is not assembled properly. If the DF staple unit is not shifted manually back and forth, repair the part that restricts the operation. 2 Checking the DF staple unit drive components The DF staple unit drive parts are not properly attached or faulty. Reattach the DF staple unit drive parts. If not repaired, replace the parts. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF staple motor - DF main PWB • DF staple sensor - DF main PWB Wiring diagram 4 Replacing the DF staple motor The DF staple motor is faulty. Execute U240 [Motor] > [Staple]. If the DF staple motor does not properly operate, replace the DF staple unit. 5 Checking the DF staple sensor The DF staple sensor is not properly attached or faulty. Reattach the DF staple sensor. Then, replace the DF staple unit if the sensor is not fixed. Detaching and reattaching the DF staple unit 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8220 |
Description: | Document finisher* front clincher problem • During initialization, the front clincher is not detected in the home position within 500 ms after the front clincher returns to the home position. JAM90 is indicated the first time this problem occurs. If the problem occurs after initialization when the front cover is opened and closed, the problem is in the front clincher. • When the front clincher is operated from the home position, the front clincher home position sensor does not turn off within 500 ms. |
Causes: | Loose connection of the front clincher motor connector. Malfunction of the front clincher motor. Malfunction of the front clincher home position sensor. Loose connection of the front clincher home position sensor connector. Defective finisher main PWB. |
Remedy: | Loose connection of the front clincher motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Malfunction of the front clincher motor. Replace the front clincher motor and check for correct operation. Malfunction of the front clincher home position sensor. Replace the front clincher home position sensor and check for correct operation. Loose connection of the front clincher home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation. |
Error code: | C8230 |
Description: | DF staple motor error Object: 4000-sheet finisher |
Causes: | J7000 (DF staple jam) is detected twice continuously. (Condition of detecting 2nd paper jam: The home position is not detected when passing 600ms since the motor starts up.) |
Remedy: | 1 Checking the DF staple unit The DF staple unit is not assembled properly. If the DF staple cannot operate manually without paper jam, repair the part that restricts the DF staple. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF staple unit - DF main PWB Wiring diagram 3 Replacing the DF staple unit The DF staple unit is faulty. Replace the DF staple unit. Detaching and reattaching the DF staple unit 4 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8240 |
Description: | Document finisher rear clincher problem • During initialization, the rear clincher is not detected in the home position within 500 ms after the rear clincher returns to the home position. JAM90 is indicated the first time this problem occurs. If the problem occurs after initialization when the front cover is opened and closed, the problem is in the rear clincher. • When the rear clincher is operated from the home position, the rear clincher home position sensor does not turn off within 500 ms. |
Causes: | Loose connection of the rear clincher motor connector. Malfunction of the rear clincher motor. Malfunction of the rear clincher home position sensor. Loose connection of the rear clincher home position sensor connector. Defective finisher main PWB. |
Remedy: | Loose connection of the rear clincher motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Malfunction of the rear clincher motor. Replace the rear clincher motor and check for correct operation. Malfunction of the rear clincher home position sensor. Replace the rear clincher home position sensor and check for correct operation. Loose connection of the rear clincher home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation. |