Kyocera KM-8030
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
400000
Скорость печати
A4
80
Цветность печати
черно-белая
Общие характеристики |
|
|---|---|
Факс |
|
Копир |
|
Печать фотографий |
|
Сканер |
|
Телефон |
|
Область применения |
большой офис |
Размещение |
напольный |
Цветность печати |
|
Макс. формат |
A3 |
Число страниц в месяц |
400 000 |
Тип устройства |
МФУ |
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Принтер |
|
Время разогрева |
30 |
Прямая печать |
|
Двусторонняя печать |
|
Пигментные чернила |
|
Печать без полей |
|
Скорость ч/б печати |
|
| A4 | 80 |
| A3 | 41 |
Копир |
|
Макс, количество копий за цикл |
9 999 |
Время выхода первой копии |
3,2 |
Шаг масштабирования |
0,01 |
Значение масштаба |
|
| Максимальное | 4 |
| Минимальное | 0,25 |
Макс, разрешение (ч/б) |
|
| По Y | 600 |
| По X | 600 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Стандарт WIA |
|
Расходные материалы |
|
Количество картриджей |
1 |
Печать на: |
|
| CD/DVD |
|
| Пленках |
|
| Рулоне |
|
| Конвертах |
|
| Этикетках |
|
| Фотобумаге |
|
| Матовой бумаге |
|
| Карточках |
|
| Глянцевой бумаге |
|
Плотность бумаги |
|
| Минимальная | 45 |
| Максимальная | 200 |
Факс |
|
Цветной |
|
Телефон |
|
Беспроводная трубка |
|
Спикерфон |
|
АОН |
|
Проводная трубка |
|
Стандарт DECT |
|
Автоответчик |
|
Caller ID |
|
Шрифты и языки управления |
|
Языки управления |
|
| PostScript |
|
| PCL 6 |
|
| PostScript 3 |
|
| PCL 5e |
|
| PostScript 2 |
|
| PCL 5c |
|
| PPDS |
|
|
|
|
Количество установленных шрифтов |
|
| PCL | 80 |
Лотки |
|
Подача бумаги |
|
| Максимальная | 8 100 |
| Стандартная | 6 100 |
Вывод бумаги |
|
| Стандартный | 250 |
Финишер |
|
Электронная сортировка |
|
Степлер |
|
Сортер |
|
Брошюровщик |
|
Сортировка со сдвигом |
|
Интерфейсы |
|
Ethernet (RJ-45) |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Bluetooth |
|
Инфракрасный порт |
|
RS-232 |
|
Устройство для чтения карт памяти |
|
Количество свободных слотов расширения |
2 |
Поддержка карт памяти |
|
| CompactFlash |
|
Память/Процессор |
|
Емкость жесткого диска |
40 |
Процессор |
PowerPC 750CX |
Объем памяти |
128 |
Макс, объем памяти |
576 |
Частота процессора |
600 |
Дополнительная информация |
|
Поддержка ОС |
|
| DOS |
|
| Mac OS |
|
| Windows |
|
| Linux |
|
Потребляемая мощность |
|
| В режиме ожидания | 395 |
| При работе | 1 503 |
Уровень шума |
|
| При работе | 75 |
| В режиме ожидания | 58 |
Габариты |
|
Вес |
188 |
Ширина |
680 |
Глубина |
783 |
Высота |
1 190 |
Модули
Fuser Section I
Paper Conveying (DP)
Deck Feed Section II
Frames I
FRAME L
OPTICAL SECTION I
Frames (DP)
PANEL
DUPLEX UNIT II
Paper Eject (DP)
Fuser Section II
Paper Conveying II
Driving Unit (DP)
PAPER EJECT
DUPLEX UNIT III
Paper Feed-In I
COOLING SECTION
Paper Feed-In II
Duplex Section (DP)
Electrical Components I
Paper Conveying I
DRIVING SECTION II
OPTICAL SECTION II
Deck Feed Section I
Paper Deck Unit I
Cleaning Unit II
Frames II
Options
Accessories and Tools
DRIVING SECTION I
ELECTRICAL COMPONENTS III
PAPER CASSETTE
PAPER FEED
Imaging Unit
Covers (DP)
Paper Deck Unit II
Electrical Components II
OPERATION UNIT
Paper Feed-In III
Developer unit
Electrical Components (DP)
DUPLEX UNIT I
Paper Conveying III
COVERS
Paper Feed-in (DP)
ADF 1
Cleaning Unit I
Детали Cleaning Unit I
| Деталь: | BASE FUSER |
| Парткод: | 2FB20540 |
| Деталь: | FRONT FRAME FUSER |
| Парткод: | 2FB20520 |
| Деталь: | REAR FRAME FUSER |
| Парткод: | 2FB20530 |
| Деталь: | PIN PRESSURE |
| Парткод: | 2FB20390 |
| Деталь: | LEVER PRESSURE |
| Парткод: | 2FB20310 |
| Деталь: | SPRING PRESSURE |
| Парткод: | 2FB20420 |
| Деталь: | MOUNT PRESSURE |
| Парткод: | 2FB20400 |
| Деталь: | WIRE FIXING UNIT |
| Парткод: | 2FB27380 |
| Деталь: | FRONT STOPPER COVER |
| Парткод: | 302FB20750 |
| Деталь: | LABEL UNIT REPLACEMENT |
| Парткод: | 302FB05080 |
| Деталь: | REAR STOPPER COVER |
| Парткод: | 302FB20760 |
| Деталь: | ROLLER PRESSURE |
| Парткод: | 2FB20020 |
| Деталь: | FRONT GUIDE FUSER A |
| Парткод: | 302FB20010 |
| Деталь: | MOUNT GUIDE FUSER EJECT |
| Парткод: | 2FB20550 |
| Деталь: | BUSH CLEANING ROLLER |
| Парткод: | 302FB20170 |
| Деталь: | SPRING FUSER CLEANING |
| Парткод: | 2FB20240 |
| Деталь: | LOWER ROLLER CLEANING |
| Парткод: | 2FB20450 |
| Деталь: | LOWER GUIDE FUSER EJECT |
| Парткод: | 2FB20100 |
| Деталь: | CLAW,PRESS ROLLER |
| Парткод: | 36720493 |
| Деталь: | SPRING,SEPARATION CLAW |
| Парткод: | 68320310 |
| Деталь: | ROLLER HEAT |
| Парткод: | 2FB20060 |
| Деталь: | BUSHING HEAT ROLLER |
| Парткод: | 2FB20040 |
| Деталь: | BEARING HEAT ROLLER |
| Парткод: | 2FG20230 |
| Деталь: | STOPPER ROLLER BEARING |
| Парткод: | 302FB20840 |
| Деталь: | GEAR 50 HEAT ROLLER B |
| Парткод: | 302FB20950 |
| Деталь: | STOPPER HEAT ROLLER |
| Парткод: | 302FB20070 |
| Деталь: | UPPER GUIDE FUSER |
| Парткод: | 2FB20090 |
| Деталь: | NUT FUSER A /FS-1800/3800 A4 |
| Парткод: | 5MMS111SL002 |
| Деталь: | STAY FUSER |
| Парткод: | 2FB20120 |
| Деталь: | THERMOSTAT 190 FUSER |
| Парткод: | 2FB20560 |
| Деталь: | TERMINAL THERMOSTAT |
| Парткод: | 2FB20680 |
| Деталь: | THERMISTOR FUSER |
| Парткод: | 302FB20200 |
| Деталь: | FRONT GUIDE FUSER CLAW |
| Парткод: | 302FB20131 |
| Деталь: | GEAR CLAW THRUST |
| Парткод: | 2FB20640 |
| Деталь: | PIN CLAW THRUST |
| Парткод: | 2FB20430 |
| Деталь: | LEVER CLAW THRUST |
| Парткод: | 2FB20650 |
| Деталь: | SHAFT FUSER WEB DRIVE A |
| Парткод: | 2FB20290 |
| Деталь: | GEAR B,FIXING CLEANING DRIVE |
| Парткод: | 2BC20730 |
| Деталь: | MOUNT FUSER DRAWER |
| Парткод: | 2FB20030 |
| Деталь: | CLUTCH CLN |
| Парткод: | 2BG20520 |
| Деталь: | GEAR 30 WEB ROLLER |
| Парткод: | 2FB20620 |
| Деталь: | STOPPER 5 FUSER |
| Парткод: | 302FB20900 |
| Деталь: | GEAR FUSER JOINT B |
| Парткод: | 302FB20220 |
| Деталь: | HEATER S120 FUSER |
| Парткод: | 2FB20470 |
| Деталь: | HEATER S240 FUSER |
| Парткод: | 2FB20500 |
| Деталь: | TERMINAL S HEATER |
| Парткод: | 2FB20590 |
| Деталь: | HEATER M120 FUSER |
| Парткод: | 2FB20460 |
| Деталь: | HEATER M240 FUSER |
| Парткод: | 2FB20490 |
| Деталь: | TERMINAL M HEATER |
| Парткод: | 2FB20580 |
| Деталь: | HEATER L120 FUSER |
| Парткод: | 2FB20480 |
| Деталь: | HEATER L240 FUSER |
| Парткод: | 2FB20510 |
| Деталь: | TERMINAL L HEATER |
| Парткод: | 2FB20600 |
| Деталь: | FRONT MOUNT HEATER |
| Парткод: | 2FB20630 |
| Деталь: | SUPPORT PLATE FUSER CLEANING |
| Парткод: | 302FB20780 |
| Деталь: | PIN FUSER CLEANING RETAINING |
| Парткод: | 302FB20790 |
| Деталь: | SPRING WEB RETAINING |
| Парткод: | 302FB20160 |
| Деталь: | STOPPER FUSER RATCHET |
| Парткод: | 302FB20830 |
| Деталь: | BUSH PRESS /49523A0152 A4 |
| Парткод: | 2BY20070 |
| Деталь: | SPRING FUSER WEB |
| Парткод: | 302FB20320 |
| Деталь: | BUSH,FIXING CLEANING |
| Парткод: | 61720460 |
| Деталь: | SHAFT FUSER WEB DRIVE |
| Парткод: | 302FB20810 |
| Деталь: | GEAR,FIXING CLEANING DRIVE |
| Парткод: | 2BC20660 |
| Деталь: | RETAINER CLEANING GEAR |
| Парткод: | 302FB20800 |
| Деталь: | ROLLER PRESSURE WEB |
| Парткод: | 302FB20770 |
| Деталь: | RATCHET FUSER CLEANING |
| Парткод: | 302FB20820 |
| Деталь: | FELT,CLEANING |
| Парткод: | 2A020330 |
| Деталь: | COVER FUSER CLEANING |
| Парткод: | 302FB20850 |
| Деталь: | UPPER COVER FUSER |
| Парткод: | 2FB20350 |
| Деталь: | PIN FUSER COVER |
| Парткод: | 2FB20860 |
| Деталь: | FRONT COVER FUSER |
| Парткод: | 2FB20670 |
| Деталь: | LABEL CAUTION FUSER |
| Парткод: | 2BG05010 |
| Деталь: | LABEL CAUTION FUSER UNIT |
| Парткод: | 302FB05531 |
| Деталь: | LEFT PLATE THERMOSTAT |
| Парткод: | 302FB20910 |
| Деталь: | RIGHT PLATE THERMOSTAT |
| Парткод: | 302FB20920 |
| Деталь: | WASHER 6 |
| Парткод: | 302FB20940 |
| Деталь: | LOCK PLATE FUSER |
| Парткод: | 302FB16231 |
| Деталь: | ADJUSTING PLATE FUSER |
| Парткод: | 302FB16201 |
| Деталь: | PARTS, FK-650(A) |
| Парткод: | 302FB93091 |
| Деталь: | PARTS, FK-650(E) |
| Парткод: | 302FB93103 |
| Деталь: | MOUNT C PULLEY |
| Парткод: | 3H608100 |
| Деталь: | HOLDER C PULLEY |
| Парткод: | 3H608090 |
| Деталь: | SPRING C PULLEY |
| Парткод: | 3H608230 |
| Деталь: | MOUNT LEFT PULLEY |
| Парткод: | 3H608130 |
| Деталь: | SHAFT C PULLEY |
| Парткод: | 3H608150 |
| Деталь: | PULLEY CONVEYING |
| Парткод: | 3H608200 |
| Деталь: | MOUNT TIMING SWITCH |
| Парткод: | 3H608140 |
| Деталь: | SWITCH REGISTRATION |
| Парткод: | 2FG27110 |
| Деталь: | LEFT GUIDE CONVEYING |
| Парткод: | 3H608120 |
| Деталь: | WIRE,TMG A |
| Парткод: | 3H627100 |
| Деталь: | SHEET CONVEYING |
| Парткод: | 303H608270 |
| Деталь: | OPEN BUSHING,OCB-375 |
| Парткод: | M1203200 |
| Деталь: | ACCESS.BUSHING |
| Парткод: | 7YZM110001++H01 |
| Деталь: | GUIDE READING |
| Парткод: | 3H602110 |
| Деталь: | HOLDER GUIDE READING |
| Парткод: | 3H602120 |
| Деталь: | SPRING READING |
| Парткод: | 3H602230 |
| Деталь: | GROUND PLATE READING |
| Парткод: | 3H602290 |
| Деталь: | LEFT GUIDE CIS |
| Парткод: | 3H610100 |
| Деталь: | JUNCTION WIRING,MOT B |
| Парткод: | 3H627020 |
| Деталь: | SHEET READING |
| Парткод: | 303H608280 |
| Деталь: | MOUNT D SWITCH |
| Парткод: | 3H610290 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | LEFT STAY CIS |
| Парткод: | 3H610110 |
| Деталь: | WIRE SADDLE,RMS-1V0(TAKEUCHI) |
| Парткод: | M70AK010 |
| Деталь: | WIRE,TMG B |
| Парткод: | 3H627110 |
| Деталь: | ROLLER CONVEYING ASSY |
| Парткод: | 3H600010 |
| Деталь: | BEARING,688ZZ |
| Парткод: | 60912270 |
| Деталь: | PULLEY C ROLLER 48 |
| Парткод: | 3H622230 |
| Деталь: | PULLEY C ROLLER 99 |
| Парткод: | 3H622070 |
| Деталь: | ROLLER REGISTRATION |
| Парткод: | 3H608010 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | PULLEY R ROLLER 32 |
| Парткод: | 3H622060 |
| Деталь: | MOUNT JAM DIAL |
| Парткод: | 3H622210 |
| Деталь: | TIMING BELT C IDLE 376 |
| Парткод: | 3H622120 |
| Деталь: | DIAL JAM REMOVEMENT |
| Парткод: | 3H622220 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | PULLEY C IDLE 16/24 |
| Парткод: | 3H622080 |
| Деталь: | TIMING BELT E ROLLOR 174 |
| Парткод: | 3H622130 |
| Деталь: | MOUNT C IDLE |
| Парткод: | 3H622050 |
| Деталь: | TENSION PLATE C IDLE |
| Парткод: | 3H622250 |
| Деталь: | TENSION PLATE E IDLE |
| Парткод: | 3H622240 |
| Деталь: | PULLEY TENSION |
| Парткод: | 303H622360 |
| Деталь: | SPRING C MOTOR |
| Парткод: | 3H622270 |
| Деталь: | SPRING HOOK |
| Парткод: | 3HL07240 |
| Деталь: | EDGING, EDS-0607U(KITAGAWA) |
| Парткод: | M2104260 |
| Деталь: | TIMING BELT R MOTOR 102 |
| Парткод: | 3H622100 |
| Деталь: | MOTOR DP |
| Парткод: | 3H627220 |
| Деталь: | MOUNT C MOTOR |
| Парткод: | 3H622030 |
| Деталь: | TIMING BELT C MOTOR 244 |
| Парткод: | 3H622110 |
| Деталь: | ADJUST PLATE C MOTOR |
| Парткод: | 3H622040 |
| Деталь: | GUIDE REGISTRATION |
| Парткод: | 3H608050 |
| Деталь: | FELT DUPLEX |
| Парткод: | 3H610240 |
| Деталь: | PULLEY 10,TONER RECYCLE |
| Парткод: | 66015270 |
| Деталь: | SHEET READING B |
| Парткод: | 303H608300 |
| Деталь: | SHEET REGIST LOOP |
| Парткод: | 303H608310 |
| Деталь: | PULLEY CASSETTE RAIL |
| Парткод: | 2FB06900 |
| Деталь: | PIN CASSETTE RAIL |
| Парткод: | 2FB06710 |
| Деталь: | PULLEY RAIL |
| Парткод: | 2BG02240 |
| Деталь: | PIN PULLEY |
| Парткод: | 2BG20350 |
| Деталь: | RIGHT RAIL DECK FEED |
| Парткод: | 302FB06921 |
| Деталь: | LEFT RAIL DECK FEED |
| Парткод: | 302FB06911 |
| Деталь: | GROUND PLATE ROLLER |
| Парткод: | 302FB09331 |
| Деталь: | GROUND PLATE LEFT RAIL |
| Парткод: | 302FB09160 |
| Деталь: | GROUND PLATE RIGHT RAIL |
| Парткод: | 302FB09170 |
| Деталь: | BAND,RSG-130-V0(KITAGAWA) |
| Парткод: | M21AH010 |
| Деталь: | COVER DECK FEED |
| Парткод: | 2FB06960 |
| Деталь: | GROUND PLATE DECK GUIDE |
| Парткод: | 302FB09130 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | FILM FEED C |
| Парткод: | 302FB09410 |
| Деталь: | FILM FEED B |
| Парткод: | 302FB09360 |
| Деталь: | LABEL JAM C |
| Парткод: | 302FB05170 |
| Деталь: | SPRING DECK FEED A |
| Парткод: | 2FB06680 |
| Деталь: | STOPPER BYPASS TABLE |
| Парткод: | 2FB07330 |
| Деталь: | SHAFT PULLEY FEED |
| Парткод: | 2FB06650 |
| Деталь: | PULLEY FEED SHIFT |
| Парткод: | 2BL21330 |
| Деталь: | SPRING DECK FEED B |
| Парткод: | 2FB06690 |
| Деталь: | PARTS,UPPER GUIDE DECK ASSY |
| Парткод: | 302FB93260 |
| Деталь: | CASTER UA |
| Парткод: | 302A002171 |
| Деталь: | HEATER DEHUMIDIFIER 120 |
| Парткод: | 302FB25050 |
| Деталь: | HEATER DEHUMIDIFIER 240 |
| Парткод: | 302FB25060 |
| Деталь: | MOUNT LSU CONNECTOR |
| Парткод: | 302FB26300 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC02B1001+H01 |
| Деталь: | SHIELD PLATE,BASE |
| Парткод: | 2BC02240 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | LABEL HIGH TEMP CAUTION |
| Парткод: | 302FB05540 |
| Деталь: | WIRE SADDLE,RLWS-3T V0(KITAGAWA) |
| Парткод: | M21AK030 |
| Деталь: | EDGING,EDS-17L(KITAGAWA) |
| Парткод: | M2104250 |
| Деталь: | REAR REINFORCEMENT BASE |
| Парткод: | 2FB02110 |
| Деталь: | PARTITION PLATE FIXING |
| Парткод: | 2FB23070 |
| Деталь: | PROJECTION PLATE A |
| Парткод: | 2FB02710 |
| Деталь: | PROJECTION PLATE C |
| Парткод: | 302FB02730 |
| Деталь: | REAR DUCT LSU |
| Парткод: | 302FB23051 |
| Деталь: | PARTS, LK-650 |
| Парткод: | 302FB93042 |
| Деталь: | GROUND PLATE,SCANNER FRAME |
| Парткод: | 2A026180 |
| Деталь: | FAN COOLING(60-15TH) |
| Парткод: | 302FB25130 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | BAND,RSG-130-V0(KITAGAWA) |
| Парткод: | M21AH010 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSSTG77300H01 |
| Деталь: | COVER SCREW |
| Парткод: | 302BG04560 |
| Деталь: | Подшипник прижимного вала |
| Парткод: | 5MVX221XN004 |
| Цена: | 280 ₽ |
| Деталь: | FAN DP |
| Парткод: | 3H627280 |
| Деталь: | COVER BASE |
| Парткод: | 2FB12270 |
| Деталь: | WIRE ORIGINAL SIZE SENSOR |
| Парткод: | 2FB27590 |
| Деталь: | BAND,RSG-130-V0(KITAGAWA) |
| Парткод: | M21AH010 |
| Деталь: | INVERTER PCB YG |
| Парткод: | 302FB28231 |
| Деталь: | WIRE SCANNER LAMP |
| Парткод: | 2FB27830 |
| Деталь: | WIRE LAMP INVERTER |
| Парткод: | 2FB27650 |
| Деталь: | GROUND PLATE SCANNER D |
| Парткод: | 302FB12890 |
| Деталь: | WIRE SCANNER HP SW |
| Парткод: | 302FB27572 |
| Деталь: | MOUNT SCANNER PI |
| Парткод: | 2FB12320 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | BAND,RSG-100 (KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610001++H01 |
| Деталь: | PARTS, ISU ASSY |
| Парткод: | 302FB93170 |
| Деталь: | JUNCTION BASE LAMP WIRE |
| Парткод: | 302FB12360 |
| Деталь: | FEED GUIDE LAMP WIRE |
| Парткод: | 2FB12350 |
| Деталь: | PULLEY MOVING IDLE |
| Парткод: | 2FB12410 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | PULLEY,SCANNER |
| Парткод: | 2BC12120 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | DRUM PULLEY |
| Парткод: | 2C912340 |
| Деталь: | FRONT WIRE SCANNER |
| Парткод: | 2FB12240 |
| Деталь: | REAR WIRE SCANNER |
| Парткод: | 2FB12250 |
| Деталь: | SHAFT SCANNER DRIVE |
| Парткод: | 2FB12230 |
| Деталь: | BEARING,688ZZNR |
| Парткод: | 28107400 |
| Деталь: | Gear Z36 |
| Парткод: | 2C912320 |
| Деталь: | MIRROR FRAME B |
| Парткод: | 2FB12160 |
| Деталь: | FLANGE 30 WIRE |
| Парткод: | 302FB12310 |
| Деталь: | PULLEY LAMP WIRE |
| Парткод: | 2FB12190 |
| Деталь: | MIRROR B |
| Парткод: | 2FB12180 |
| Деталь: | MIRROR HOLDER |
| Парткод: | 75712080 |
| Деталь: | SLIDER,SCANNER |
| Парткод: | 2AV12450 |
| Деталь: | ADJUSTING PLATE B |
| Парткод: | 2FB12170 |
| Деталь: | TENSION SPRING,SCANNER WIRE |
| Парткод: | 72112520 |
| Деталь: | MIRROR A |
| Парткод: | 2FB12140 |
| Деталь: | MIRROR FRAME A |
| Парткод: | 2FB12110 |
| Деталь: | SPRING,MIRROR HOLDER |
| Парткод: | 2BC12190 |
| Деталь: | REFLECTOR SCANNER |
| Парткод: | 2FB12130 |
| Деталь: | RETAINER WIRE |
| Парткод: | 2C912150 |
| Деталь: | LAMP SCANNER YG |
| Парткод: | 302FB12440 |
| Деталь: | GUIDE LAMP WIRE |
| Парткод: | 2FB12150 |
| Деталь: | SHD PWB ASSY |
| Парткод: | 302FB01081 |
| Деталь: | SHIELD SCANNER SHAFT |
| Парткод: | 302FB12940 |
| Деталь: | MOTOR SCANNER |
| Парткод: | 2FB12210 |
| Деталь: | MOUNT SCANNER MOTOR |
| Парткод: | 302FB12221 |
| Деталь: | GEAR Z18/39 |
| Парткод: | 2C912310 |
| Деталь: | BELT SCANNER |
| Парткод: | 2C912260 |
| Деталь: | MOUNT RELEASE SWITCH |
| Парткод: | 302FB12340 |
| Деталь: | GUIDE RELEASE SWITCH |
| Парткод: | 2C912620 |
| Деталь: | SHAFT RELEASE SWITCH |
| Парткод: | 2C912640 |
| Цена: | 80 ₽ |
| Деталь: | SPRING RELEASE SWITCH |
| Парткод: | 2C912650 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610005++H01 |
| Деталь: | WIRE CCD DATA |
| Парткод: | 2FB27550 |
| Деталь: | WIRE CCD-SCANNER PWB |
| Парткод: | 2FB27560 |
| Деталь: | FILM SHIELD WIRE |
| Парткод: | 302FB12960 |
| Деталь: | WIRE CCD |
| Парткод: | 302FB27960 |
| Деталь: | MOUNT ORIGINAL DETECTION |
| Парткод: | 2FB12260 |
| Деталь: | SENSOR ORIGINAL |
| Парткод: | 2C927090 |
| Деталь: | COVER ISU |
| Парткод: | 2FB12660 |
| Деталь: | LABEL GLASS CAUTION |
| Парткод: | 2C905160 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSSTG55263H01 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSSTG55020H01 |
| Деталь: | FAN COOLING(60-15TH) |
| Парткод: | 302FB25130 |
| Деталь: | GROUND PLATE SCANNER A |
| Парткод: | 302FB12840 |
| Деталь: | CLAMP,EMT-5N(TAKEUCHI) |
| Парткод: | M7005030 |
| Деталь: | COVER SCREW |
| Парткод: | 302BG04560 |
| Деталь: | GUIDE PIN |
| Парткод: | 302FB12760 |
| Деталь: | ACCESS.CLAMP |
| Парткод: | 7YZM390002++H01 |
| Деталь: | SHIELD LAMP WIRE |
| Парткод: | 302FB12810 |
| Деталь: | GROUND PLATE SCANNER B |
| Парткод: | 302FB12850 |
| Деталь: | GROUND PLATE SCANNER C |
| Парткод: | 302FB12860 |
| Деталь: | GROUND PLATE SHAFT SCANNER |
| Парткод: | 302FB12870 |
| Деталь: | ACCESS.CLAMP |
| Парткод: | 7YZM320001++H01 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610003++H01 |
| Деталь: | CORE,9-20X32 |
| Парткод: | 65027480 |
| Деталь: | CORE 15-26X13 |
| Парткод: | 2AV27440 |
| Деталь: | SHIELD WIRE SCANNER |
| Парткод: | 302FB12820 |
| Деталь: | SHIELD WIRE CCD |
| Парткод: | 302FB12740 |
| Деталь: | COVER SHD PCB |
| Парткод: | 2FB12590 |
| Деталь: | PIN SCANNER RETAIN B |
| Парткод: | 302FB12970 |
| Деталь: | LOWER STAY |
| Парткод: | 3H602030 |
| Деталь: | LEFT STAY FRAME |
| Парткод: | 3H602590 |
| Деталь: | RIGHT STAY |
| Парткод: | 303H602541 |
| Деталь: | FRONT FRAME ASSY |
| Парткод: | 303H600022 |
| Деталь: | REAR FRAME ASSY |
| Парткод: | 303H600031 |
| Деталь: | LEFT STAY |
| Парткод: | 303H602041 |
| Деталь: | FRONT GUIDE D FRAME |
| Парткод: | 3H610250 |
| Деталь: | FULCRUM PLATE D RACK |
| Парткод: | 3H610220 |
| Деталь: | HINGE L |
| Парткод: | 3H603010 |
| Деталь: | HINGE R |
| Парткод: | 303H603021 |
| Деталь: | MOUNT MAIN PCB |
| Парткод: | 3H602140 |
| Деталь: | PLATE PUSH SW |
| Парткод: | 3H602100 |
| Деталь: | SPACER SHAFT |
| Парткод: | 3H602320 |
| Деталь: | SHAFT LEVER ADJUST |
| Парткод: | 303H602201 |
| Деталь: | SPRING,SWITCHING LEVER |
| Парткод: | 63722190 |
| Деталь: | ADJUST PLATE HINGE |
| Парткод: | 303H602301 |
| Деталь: | SHAFT ADJUST PLATE B |
| Парткод: | 3H602260 |
| Деталь: | STOPPER ORIGINAL SW |
| Парткод: | 3H602330 |
| Деталь: | SPRING PUSH SW |
| Парткод: | 3H602310 |
| Деталь: | HOLDER SPRING |
| Парткод: | 3H602090 |
| Деталь: | INTER LOCK SWITCH |
| Парткод: | 2FB27160 |
| Деталь: | LABEL,HIGH VOLTAGE CAUTION(JPN) |
| Парткод: | 33405050 |
| Деталь: | LEFT STAY ASSY |
| Парткод: | 303H602350 |
| Деталь: | DUCT CIS |
| Парткод: | 303H602380 |
| Деталь: | FAN DP |
| Парткод: | 3H627280 |
| Деталь: | ACCESS.BUSHING |
| Парткод: | 7YZM110001++H01 |
| Деталь: | REINFORCEMENT LEFT STAY |
| Парткод: | 303H602420 |
| Деталь: | PIN HINGEBASE |
| Парткод: | 3H602280 |
| Деталь: | STOPPER HINGE |
| Парткод: | 3H603030 |
| Деталь: | VIBRATION INSULATOR,FAN |
| Парткод: | 303H602450 |
| Деталь: | Мотор подъёма кассеты |
| Парткод: | 302FB07252 |
| Цена: | 4 900 ₽ |
| Деталь: | COLLAR DU PULLEY |
| Парткод: | 302FB09640 |
| Деталь: | GEAR DU 30 |
| Парткод: | 302FB09650 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | PULLEY 30 DU |
| Парткод: | 302FB09610 |
| Деталь: | ROLLER B DU CONVEYING |
| Парткод: | 302FB19211 |
| Деталь: | BUSHING 6,REGISTRATION |
| Парткод: | 2BC06520 |
| Деталь: | GEAR 27/24 ONE-WAY L |
| Парткод: | 2FB19620 |
| Деталь: | SPACER DU PULLEY |
| Парткод: | 302FB09670 |
| Деталь: | BELT FRONT DRIVE |
| Парткод: | 302FB09720 |
| Деталь: | ROLLER A DU CONVEYING |
| Парткод: | 302FB19371 |
| Деталь: | GEAR DU 17 |
| Парткод: | 302FB09631 |
| Деталь: | PLATE DU ROLLER |
| Парткод: | 302FB09620 |
| Деталь: | ROLLER SWITCHBACK DU |
| Парткод: | 302FB19401 |
| Деталь: | GEAR 24 DU CONVEYING |
| Парткод: | 2FB19140 |
| Деталь: | ROLLER REFEED ASSY |
| Парткод: | 2FB00040 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | GEAR DU 30 ONEWAY |
| Парткод: | 302FB09680 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | PULLEY 24/24 DU CONVEYING |
| Парткод: | 2FB19630 |
| Деталь: | GEAR 37/24 DU CONVEYING |
| Парткод: | 2FB19680 |
| Деталь: | BELT REAR FEED |
| Парткод: | 2FB19640 |
| Деталь: | TENSION PLATE DU |
| Парткод: | 2FB19280 |
| Деталь: | PULLEY DU TENSION |
| Парткод: | 2FB19290 |
| Деталь: | SPRING TENSION |
| Парткод: | 2FB19600 |
| Деталь: | MOUNT PLATE DU DRAWER |
| Парткод: | 2FB19200 |
| Деталь: | EDGING,EDS-1717U |
| Парткод: | M2104220 |
| Деталь: | WIRE DUPLEX UNIT A |
| Парткод: | 2FB27740 |
| Деталь: | BAND,RSG-100 (KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | HOOK,DUPLEX RETAINING |
| Парткод: | 2BC21500 |
| Деталь: | SPRING DU HOOK |
| Парткод: | 2FB19850 |
| Деталь: | GEAR 28/35 |
| Парткод: | 2FB19170 |
| Деталь: | MOTOR DU CONVEYING |
| Парткод: | 302FB25310 |
| Деталь: | MOUNT PLATE DU DRIVE |
| Парткод: | 2FB19190 |
| Деталь: | MOTOR DUPLEX |
| Парткод: | 2FB27130 |
| Деталь: | GUIDE FEED REVERSE |
| Парткод: | 2FB19320 |
| Деталь: | GUIDE TURN OVER DU |
| Парткод: | 2FB19100 |
| Деталь: | SOLENOID STOPPER |
| Парткод: | 302FB25020 |
| Деталь: | MOUNT FEED SHIFT SOLENOID |
| Парткод: | 2FB19130 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC03B1003+H01 |
| Деталь: | SPRING,PAPER EJECT HOLDER |
| Парткод: | 63213360 |
| Деталь: | GUIDE DU REFEED |
| Парткод: | 2FB19590 |
| Деталь: | PULLEY CONVEYING |
| Парткод: | 3H608200 |
| Деталь: | SHAFT C PULLEY |
| Парткод: | 3H608150 |
| Деталь: | HOLDER PULLEY |
| Парткод: | 2FB19740 |
| Деталь: | MOUNT C PULLEY |
| Парткод: | 3H608100 |
| Деталь: | SPRING C PULLEY |
| Парткод: | 302FB19710 |
| Деталь: | MOUNT REFEED PULLEY |
| Парткод: | 2FB19120 |
| Деталь: | SWITCH REGISTRATION |
| Парткод: | 2FG27110 |
| Деталь: | WIRE DUPLEX UNIT F |
| Парткод: | 2FB27790 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | EDGING, EDS-17L(KITAGAWA) |
| Парткод: | M2104250 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610001++H01 |
| Деталь: | CUT WASHER 4 |
| Парткод: | 302FB09830 |
| Деталь: | FILM DU DRAWER |
| Парткод: | 302FB09840 |
| Деталь: | GUIDE EJECT |
| Парткод: | 3H610160 |
| Деталь: | STATIC ELIMINATOR EJECT |
| Парткод: | 303H610330 |
| Деталь: | COVER EJECT |
| Парткод: | 3H610300 |
| Деталь: | ROLLER EJECT |
| Парткод: | 3H610010 |
| Цена: | 2 100 ₽ |
| Деталь: | GEAR CIS ROLLER 20 |
| Парткод: | 3H622020 |
| Деталь: | RING STOPPER 4 |
| Парткод: | 5MVL177DN001 |
| Деталь: | BUSHING 6,REGISTRATION |
| Парткод: | 2BC06520 |
| Деталь: | PULLEY E ROLLER ASSY |
| Парткод: | 303H622350 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | SHAFT LIFT |
| Парткод: | 3H606080 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | GEAR LIFT 55 |
| Парткод: | 303H622181 |
| Деталь: | STOPPER LIFT LEVER |
| Парткод: | 3H606140 |
| Деталь: | LEVER LIFT |
| Парткод: | 3H606070 |
| Деталь: | MOUNT LEVER ADJUST |
| Парткод: | 3H602180 |
| Деталь: | PLATE SPRING LEVER |
| Парткод: | 3H602240 |
| Деталь: | HOOK LEVER ADJUST |
| Парткод: | 3H602190 |
| Деталь: | LEVER ADJUSTMENT |
| Парткод: | 3H604040 |
| Деталь: | LOWER GUIDE PF |
| Парткод: | 3H607170 |
| Деталь: | GUIDE LIFT |
| Парткод: | 3H607210 |
| Деталь: | SHAFT SEPARATION |
| Парткод: | 303H607141 |
| Деталь: | TORQUE LIMITER FEED |
| Парткод: | 2FB06100 |
| Деталь: | PULLEY SEPARATION |
| Парткод: | 3H607120 |
| Деталь: | GEAR 32 DPX |
| Парткод: | 2C922110 |
| Деталь: | GUIDE SEPARATION |
| Парткод: | 3H607180 |
| Деталь: | COVER SEPARATION |
| Парткод: | 3H607080 |
| Деталь: | WIRE SADDLE,RMS-1V0(TAKEUCHI) |
| Парткод: | M70AK010 |
| Деталь: | UPPER GUIDE PF |
| Парткод: | 3H607160 |
| Деталь: | SWITCH REGISTRATION |
| Парткод: | 2FG27110 |
| Деталь: | INTER LOCK SWITCH |
| Парткод: | 2FB27160 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | HOLDER LF |
| Парткод: | 3H607050 |
| Деталь: | WEIGHT LF PULLEY |
| Парткод: | 303H607270 |
| Деталь: | PULLEY LF |
| Парткод: | 3H607020 |
| Цена: | 1 900 ₽ |
| Деталь: | SHAFT LF |
| Парткод: | 3H607100 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | PULLEY 20,DUPLEX CONVEYING |
| Парткод: | 68721640 |
| Деталь: | HOLDER PF |
| Парткод: | 3H607060 |
| Деталь: | GUIDE PF SPRING |
| Парткод: | 3H607240 |
| Деталь: | SPRING PF |
| Парткод: | 3H607150 |
| Деталь: | SHAFT BELT |
| Парткод: | 3H607090 |
| Деталь: | COLLAR PF B |
| Парткод: | 3H607040 |
| Деталь: | BELT PF |
| Парткод: | 3H607010 |
| Деталь: | COLLAR PF A |
| Парткод: | 3H607030 |
| Деталь: | SHAFT PF |
| Парткод: | 3H607110 |
| Деталь: | BUSHING PF HOLDER |
| Парткод: | 3H607130 |
| Деталь: | PULLEY 20,SWITCH BACK |
| Парткод: | 2BC21420 |
| Деталь: | RING STOPPER 6 |
| Парткод: | 5MVL177DN002 |
| Деталь: | BELT 170 LF |
| Парткод: | 3H607190 |
| Деталь: | LEVER PRESS |
| Парткод: | 3H607070 |
| Деталь: | ROLLER TENSION |
| Парткод: | 3H607220 |
| Деталь: | COVER PF |
| Парткод: | 3H607200 |
| Деталь: | FELT DUPLEX |
| Парткод: | 3H610240 |
| Деталь: | SEAL WIRE |
| Парткод: | 2BL14480 |
| Деталь: | PULLEY TENSION |
| Парткод: | 303H607280 |
| Деталь: | REINFORCEMENT LF |
| Парткод: | 303H607290 |
| Деталь: | FILM SEPARATION |
| Парткод: | 303H607300 |
| Деталь: | SHAFT FUSER EJECT RELEASE |
| Парткод: | 302FB21340 |
| Деталь: | RIGHT HOOK FEED RELEASE |
| Парткод: | 2FB20690 |
| Деталь: | LABEL JAM A6 |
| Парткод: | 302FB05140 |
| Деталь: | UPPER ROLLER FUSER EJECT |
| Парткод: | 302FB21230 |
| Деталь: | BEARING 686ZZ |
| Парткод: | G3001360 |
| Деталь: | UPPER PLATE FUSER EJECT |
| Парткод: | 2FB20210 |
| Деталь: | UPPER COVER B FUSER EJECT |
| Парткод: | 302FB20720 |
| Деталь: | UPPER COVER A FUSER EJECT |
| Парткод: | 302FB20710 |
| Деталь: | SPRING FUSER COVER |
| Парткод: | 302FB20740 |
| Деталь: | SHAFT FUSER EJECT COVER |
| Парткод: | 302FB20730 |
| Деталь: | LEFT SPRING COVER |
| Парткод: | 302FB20880 |
| Деталь: | RIGHT SPRING COVER |
| Парткод: | 302FB20870 |
| Деталь: | PIN FUSER COVER |
| Парткод: | 2FB20860 |
| Деталь: | UPPER HOLDER FUSER EJECT |
| Парткод: | 2FB20110 |
| Деталь: | UPPER GUIDE FUSER EJECT |
| Парткод: | 2FB20150 |
| Деталь: | SEPARATOR FUSER ASSY |
| Парткод: | 302FB20250 |
| Деталь: | SHAFT,SEPARATION CLAW |
| Парткод: | 2BC20190 |
| Деталь: | STOPPER,SEPARATION CLAW |
| Парткод: | 2BC20380 |
| Деталь: | SPRING SEPARATION CLAW |
| Парткод: | 302FB20890 |
| Деталь: | SPRING,SEPARATION CLAW THRUST |
| Парткод: | 2BC20480 |
| Деталь: | HOLDER FUSER EJECT |
| Парткод: | 2FB20570 |
| Деталь: | HANDLE,FIXING EJECT RELEASE |
| Парткод: | 2BC20400 |
| Деталь: | LABEL,FIXING EJECT RELEASE |
| Парткод: | 2BC05140 |
| Деталь: | LABEL JAM A5 |
| Парткод: | 302FB05130 |
| Деталь: | SPRING FUSER EJECT RELEASE |
| Парткод: | 302FB20140 |
| Деталь: | UPPER GUIDE FEED SHIFT |
| Парткод: | 302FB21280 |
| Деталь: | UPPER FULCRUM PIN,FEED SHIFT |
| Парткод: | 2BC20420 |
| Деталь: | SPRING FUSER EJECT DAMPER |
| Парткод: | 302FB20190 |
| Деталь: | PARTS HEAT CLAW ASSY |
| Парткод: | 302FB93290 |
| Деталь: | HOUSING REGIST |
| Парткод: | 2FB17010 |
| Деталь: | MOTOR REGISTRATION |
| Парткод: | 2FB27150 |
| Деталь: | MOTOR FEED A |
| Парткод: | 302FB27250 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610001++H01 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210001++H01 |
| Деталь: | MOUNT PLATE FEED SWITCH |
| Парткод: | 302FB17311 |
| Деталь: | SWITCH FEED A |
| Парткод: | 302FB27240 |
| Деталь: | WIRE FEED UNIT |
| Парткод: | 302FB27421 |
| Деталь: | SHAFT FEED HANDLE |
| Парткод: | 2FB17240 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | ROLLER FEED B |
| Парткод: | 2FB17040 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | ADJUST PLATE FEED |
| Парткод: | 302FB17300 |
| Деталь: | LOWER ROLLER REGIST |
| Парткод: | 2FB17030 |
| Деталь: | BUSHING REGIST |
| Парткод: | 302FB17270 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | LOWER GUIDE REGIST |
| Парткод: | 2FB17060 |
| Деталь: | LOWER GUIDE FEED |
| Парткод: | 2FB17070 |
| Деталь: | MAGNET UPPER REG GUIDE |
| Парткод: | 2FB17200 |
| Деталь: | SPRING REGIST |
| Парткод: | 2FB17150 |
| Деталь: | SPRING REGIST A |
| Парткод: | 302FB17320 |
| Деталь: | PULLEY 26 ONEWAY FEED |
| Парткод: | 2FB17220 |
| Деталь: | GEAR 16 REGIST |
| Парткод: | 2FB22200 |
| Деталь: | GEAR 25 FEED A |
| Парткод: | 2FB22830 |
| Деталь: | GEAR 43 FEED |
| Парткод: | 2FB22810 |
| Деталь: | GEAR 21 FEED |
| Парткод: | 2FB22820 |
| Деталь: | UPPER GUIDE FEED A |
| Парткод: | 302FB17091 |
| Деталь: | SHAFT FEED PULLEY |
| Парткод: | 2FB17050 |
| Деталь: | PULLEY FEED SHIFT |
| Парткод: | 2BL21330 |
| Деталь: | UPPER GUIDE FEED B |
| Парткод: | 302FB17101 |
| Деталь: | SPRING FEED PULLEY |
| Парткод: | 2FB17160 |
| Деталь: | LEVER RELEASE FEED |
| Парткод: | 302FB17290 |
| Деталь: | PIN,CASSETTE WORK PLATE |
| Парткод: | 66007310 |
| Деталь: | SPRING FEED GUIDE |
| Парткод: | 2FB17170 |
| Деталь: | GEAR Z18H FEED |
| Парткод: | 302FB17370 |
| Деталь: | UPPER GUIDE REG |
| Парткод: | 2FB17080 |
| Деталь: | LEVER RELEASE REGIST |
| Парткод: | 302FB17280 |
| Деталь: | SENSOR,CONVEYING |
| Парткод: | 3H327410 |
| Деталь: | WIRE REG SWITCH |
| Парткод: | 2FB27450 |
| Деталь: | COVER UPPER REG GUIDE |
| Парткод: | 2FB17210 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | TENSION PLATE FEED |
| Парткод: | 2FB17250 |
| Деталь: | GEAR 26/34 FEED |
| Парткод: | 2FB17110 |
| Деталь: | BELT FEED HANDLE |
| Парткод: | 2FB17260 |
| Деталь: | UPPER ROLLER REGIST |
| Парткод: | 2FB17020 |
| Деталь: | LABEL JAM A7 |
| Парткод: | 302FB05150 |
| Деталь: | LABEL JAM A8 |
| Парткод: | 302FB05190 |
| Деталь: | GROUND MOTOR FEED |
| Парткод: | 302FB17340 |
| Деталь: | GEAR Z47H FEED |
| Парткод: | 302FB17350 |
| Деталь: | GEAR Z18H-Z18S FEED |
| Парткод: | 302FB17360 |
| Деталь: | PIN FEED SHIFT |
| Парткод: | 2FB21610 |
| Деталь: | FILM UPPER REGIST A |
| Парткод: | 302FB17820 |
| Деталь: | FILM UPPER REGIST B |
| Парткод: | 302FB17830 |
| Деталь: | MOTOR DP |
| Парткод: | 3H627220 |
| Деталь: | MNT PF DRIVE |
| Парткод: | 3H622150 |
| Деталь: | GEAR Z22 P35 |
| Парткод: | 3H622190 |
| Деталь: | BELT 138 FEED |
| Парткод: | 3H607260 |
| Деталь: | GEAR 28 |
| Парткод: | 3H622340 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | GEAR 30/23 |
| Парткод: | 2C922070 |
| Деталь: | COLLAR PF DRIVE |
| Парткод: | 3H622310 |
| Деталь: | SHAFT PF DRIVE |
| Парткод: | 3H622200 |
| Деталь: | GR 33 CONV |
| Парткод: | 3HK22040 |
| Деталь: | GEAR 20,PAPER FEED PULLEY |
| Парткод: | 35911790 |
| Деталь: | BUSHING 6,REGISTRATION |
| Парткод: | 2BC06520 |
| Деталь: | JOINT PF DRIVE |
| Парткод: | 3H622300 |
| Деталь: | EDGING,EDS-17L(KITAGAWA) |
| Парткод: | M2104250 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610001++H01 |
| Деталь: | MOTOR LIFT |
| Парткод: | 3H627230 |
| Деталь: | MNT LIFT DRIVE |
| Парткод: | 3H622140 |
| Деталь: | GEAR 69 JOINT |
| Парткод: | 3H622170 |
| Деталь: | TORQUE LIMITER 300 |
| Парткод: | 3H622290 |
| Деталь: | GEAR 20 JOINT |
| Парткод: | 3H622160 |
| Деталь: | GEAR 20/65 IDLE |
| Парткод: | 303H622331 |
| Деталь: | COLLAR DEVELOPING UNIT |
| Парткод: | 75714210 |
| Деталь: | JUNCTION WIRING,MOT A |
| Парткод: | 3H627010 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610002++H01 |
| Деталь: | CORE 8-16X10 |
| Парткод: | 3HK27050 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | LEFT GUIDE SWITCH BACK |
| Парткод: | 2FB21010 |
| Деталь: | SWITCH REGISTRATION |
| Парткод: | 2FG27110 |
| Деталь: | FRONT FRAME EJECT |
| Парткод: | 2FB21090 |
| Деталь: | REAR FRAME EJECT |
| Парткод: | 2FB21100 |
| Деталь: | LEVER,SWITCH BACK ROLLER RELEASE |
| Парткод: | 2BC21140 |
| Деталь: | PIN EJECT |
| Парткод: | 2FB21620 |
| Деталь: | SPRING,TURN OVER ROLLER RELEASE |
| Парткод: | 2BC21150 |
| Деталь: | LEFT SHAFT TURN OVER |
| Парткод: | 302FB21390 |
| Деталь: | PULLEY ARM LARGE |
| Парткод: | 2FB21120 |
| Деталь: | LIFT PLATE,TURN OVER ROLLER RELEASE |
| Парткод: | 2BC21100 |
| Деталь: | WORK PLATE,SWITCH BACK ROLLER RELEASE |
| Парткод: | 2BC21090 |
| Деталь: | PRESSING SPRING B,SB |
| Парткод: | 29717220 |
| Деталь: | ROLLER EJECT |
| Парткод: | 2FB21050 |
| Деталь: | BEARING,688ZZNR |
| Парткод: | 28107400 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | PULLEY 24 EJECT |
| Парткод: | 2FB21140 |
| Деталь: | UPPER GUIDE EJECT |
| Парткод: | 302FB21022 |
| Деталь: | SHAFT EJECT PULLEY |
| Парткод: | 302FB21450 |
| Деталь: | PULLEY EJECT |
| Парткод: | 2FB21060 |
| Деталь: | PLATE SPRING EJECT |
| Парткод: | 302FB21200 |
| Деталь: | MOUNT,RELEASE PULLEY |
| Парткод: | 2BC21120 |
| Деталь: | FEEDBACK PULLEY |
| Парткод: | 66321430 |
| Деталь: | STOPPER 3 /2BT1107 A4 |
| Парткод: | 5MVX111DN007 |
| Деталь: | LOWER GUIDE EJECT |
| Парткод: | 2FB21150 |
| Деталь: | WIRE EJECT |
| Парткод: | 2FB27640 |
| Деталь: | STATIC ELIMINATOR,EJECT |
| Парткод: | 2AC21250 |
| Деталь: | MOUNT POWER SOURCE AC J |
| Парткод: | 302FB26340 |
| Деталь: | SPACER, KGLS-3S |
| Парткод: | M2108000 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610003++H01 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610004++H01 |
| Деталь: | AC POWER SOURCE PWB 100 |
| Парткод: | 302FB28210 |
| Деталь: | AC POWER SOURCE PWB 200 |
| Парткод: | 302FB28220 |
| Деталь: | DF POWER SOURCE PWB 100 |
| Парткод: | 302FB28240 |
| Деталь: | DF POWER SOURCE PWB 200 |
| Парткод: | 302FB28250 |
| Деталь: | WIRE DEHUMIDIFIER HEATER |
| Парткод: | 2FB27950 |
| Деталь: | WIRE OPTION PS PWB |
| Парткод: | 302FB28760 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | GUIDE MIDDLE TRAY |
| Парткод: | 2FB19090 |
| Деталь: | LOWER RACK MIDDLE TRAY |
| Парткод: | 302FB19252 |
| Деталь: | MOUNT SIDE REGIST DRIVE |
| Парткод: | 2FB19920 |
| Деталь: | GEAR Z30/B30 |
| Парткод: | 2FB19260 |
| Деталь: | BELT SIDE REGISTRATION |
| Парткод: | 2FB19420 |
| Деталь: | MOUNT SIDE REGISTRATION |
| Парткод: | 2FB19490 |
| Деталь: | MOTOR EJECT |
| Парткод: | 302FB25100 |
| Цена: | 3 600 ₽ |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610001++H01 |
| Деталь: | GEAR Z47/B20,SIDE REGISTRATION |
| Парткод: | 3BN07050 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | WIRE DUPLEX UNIT C |
| Парткод: | 2FB27760 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | COVER SW SIDE REGIST |
| Парткод: | 2FB19830 |
| Деталь: | LEFT GUIDE SIDE B |
| Парткод: | 2FB19780 |
| Деталь: | RIGHT GUIDE SIDE B |
| Парткод: | 2FB19790 |
| Деталь: | MOUNT SOLENOID |
| Парткод: | 2FB19350 |
| Деталь: | LEVER REVERSE SOLENOID |
| Парткод: | 2FB19340 |
| Деталь: | SOLENOID B CLEANING |
| Парткод: | 302FB25010 |
| Деталь: | SPRING SWITCHBACK SOL |
| Парткод: | 302FB19360 |
| Деталь: | SWITCH FEED A |
| Парткод: | 302FB27240 |
| Деталь: | WIRE DUPLEX UNIT E |
| Парткод: | 2FB27780 |
| Деталь: | COVER SW SWITCHBACK |
| Парткод: | 2FB19820 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | SPRING DU SWITCHBACK |
| Парткод: | 2FB19800 |
| Деталь: | STAY REVERSE FEED |
| Парткод: | 302FB19331 |
| Деталь: | PULLEY DU SWITCHBACK |
| Парткод: | 2FB19390 |
| Деталь: | SHAFT PULLEY |
| Парткод: | 2FB19720 |
| Деталь: | HOLDER SWITCHBACK PULLEY B |
| Парткод: | 302FB09820 |
| Деталь: | SHAFT HOLDER |
| Парткод: | 2FB19910 |
| Деталь: | RIGHT GUIDE MIDDLE TRAY |
| Парткод: | 2FB19060 |
| Деталь: | SPRING RIGHT GUIDE |
| Парткод: | 302FB19180 |
| Деталь: | STOPPER BYPASS TABLE |
| Парткод: | 2FB07330 |
| Деталь: | FILM SWITCHBACK |
| Парткод: | 302FB19560 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | SPACER REGIST DRIVE |
| Парткод: | 302FB19700 |
| Деталь: | SHIELD MOTOR DU |
| Парткод: | 302FB19690 |
| Деталь: | GROUND PLATE SIDE REG |
| Парткод: | 302FB19750 |
| Деталь: | LABEL TEMP CAUTION DU |
| Парткод: | 302FB05260 |
| Деталь: | LABEL DU TEMP |
| Парткод: | 302FB05310 |
| Деталь: | SPACER DU PULLEY |
| Парткод: | 302FB09670 |
| Деталь: | STATIC ELIMINATOR DU C |
| Парткод: | 302FB09860 |
| Деталь: | STATIC ELIMINATOR DU A |
| Парткод: | 302FB09700 |
| Деталь: | ROLLER FEED VERTICAL |
| Парткод: | 302FB09380 |
| Деталь: | ROLLER FEED VERTICAL C |
| Парткод: | 302FB09390 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | MOUNT FEED GUIDE A |
| Парткод: | 302FB07640 |
| Деталь: | SWITCH FEED A |
| Парткод: | 302FB27240 |
| Деталь: | WIRE CONVEYING SW 1 |
| Парткод: | 2FB27490 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | LEFT GUIDE B ASSY |
| Парткод: | 2FB00090 |
| Деталь: | INTER LOCK SWITCH |
| Парткод: | 2FB27160 |
| Деталь: | MOUNT FEED SW |
| Парткод: | 302FB07741 |
| Деталь: | SHEET MP HOUSING |
| Парткод: | 302FB17790 |
| Деталь: | WIRE CONVEYING SW 2 |
| Парткод: | 2FB27500 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | LEFT GUIDE C ASSY |
| Парткод: | 2FB00100 |
| Деталь: | GROUND RIGHT GUIDE B |
| Парткод: | 302FB07661 |
| Деталь: | ADJUSTMENT PLATE MP |
| Парткод: | 302FB17810 |
| Деталь: | WIRE CONVEYING SW 3 |
| Парткод: | 2FB27930 |
| Деталь: | GROUND RIGHT GUIDE E |
| Парткод: | 302FB07690 |
| Деталь: | HOUSING MP |
| Парткод: | 302FB17503 |
| Деталь: | LOWER SHAFT MP |
| Парткод: | 2FB17530 |
| Деталь: | TORQUE LIMITER BYPASS |
| Парткод: | 302FB17840 |
| Деталь: | LOWER PULLEY FEED |
| Парткод: | 2FB06080 |
| Деталь: | RING STOPPER 4 |
| Парткод: | 5MVL177DN001 |
| Деталь: | SUPPORT PAD ROLLER |
| Парткод: | 2FB17620 |
| Деталь: | LOWER GUIDE MP |
| Парткод: | 2FB17510 |
| Деталь: | SPRING MP PAD |
| Парткод: | 2FB17630 |
| Деталь: | FRICTION PLATE,BYPASS |
| Парткод: | 33906400 |
| Деталь: | PAD MP |
| Парткод: | 302FB17760 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | WIRE BYPASS PAPER FEED |
| Парткод: | 2FB27430 |
| Деталь: | LEVER PE |
| Парткод: | 302FB17582 |
| Деталь: | STOPPER PAPER |
| Парткод: | 2FB17570 |
| Деталь: | SUPPORT PLATE MP |
| Парткод: | 2FB17540 |
| Деталь: | GEAR 16T,PF IDLE |
| Парткод: | 29822230 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | PULLEY LEADING FEED |
| Парткод: | 2FB06040 |
| Деталь: | SHAFT LEADING MP |
| Парткод: | 2FB17600 |
| Деталь: | SHAFT FEED MP |
| Парткод: | 2FB17650 |
| Деталь: | UPPER GEAR,PAPER FEED |
| Парткод: | 2BC06790 |
| Деталь: | PULLEY FEED |
| Парткод: | 2FB06060 |
| Деталь: | BUSH 6 EW |
| Парткод: | 2BG22970 |
| Деталь: | JOINT DRIVE |
| Парткод: | 302FB06151 |
| Деталь: | SHAFT MP FEED |
| Парткод: | 2FB17520 |
| Деталь: | SPRING JOINT MP |
| Парткод: | 2FB17670 |
| Деталь: | JOINT MP |
| Парткод: | 2FB17640 |
| Деталь: | LEVER STOPPER RELEASE |
| Парткод: | 2FB17560 |
| Деталь: | LEVER MP SOLENOID |
| Парткод: | 2FB17550 |
| Деталь: | SOLENOID LEADING FEED |
| Парткод: | 302FB25180 |
| Деталь: | SEAL WIRE |
| Парткод: | 2BL14480 |
| Деталь: | SPRING LEADING FEED MP |
| Парткод: | 2FB17680 |
| Деталь: | SPRING SOLENOID |
| Парткод: | 2FB17690 |
| Деталь: | GROUND RIGHT GUIDE D |
| Парткод: | 302FB07680 |
| Деталь: | LATCH PLATE HOOK |
| Парткод: | 2FB07790 |
| Деталь: | HINGE VERTICAL FEED |
| Парткод: | 2FB07760 |
| Деталь: | HOLDER VERTICAL CONVEYING |
| Парткод: | 302FB07771 |
| Деталь: | LEFT OPEN GUIDE |
| Парткод: | 302FB07731 |
| Деталь: | RING STOPPER 6 |
| Парткод: | 5MVL177DN002 |
| Деталь: | GROUND RIGHT GUIDE A |
| Парткод: | 302FB07650 |
| Деталь: | COVER VERTICAL FEED 1/2 |
| Парткод: | 2FB07500 |
| Деталь: | UPPER GUIDE SIDE DECK |
| Парткод: | 2FB07540 |
| Деталь: | SHAFT SIDE DECK |
| Парткод: | 2FB07610 |
| Деталь: | REAR FRAME V FEED |
| Парткод: | 2FB07510 |
| Деталь: | LABEL VFEED CAUTION |
| Парткод: | 302FB05380 |
| Деталь: | SHAFT RELEASE HOOK |
| Парткод: | 2FB07570 |
| Деталь: | HOLDER RELEASE SHAFT |
| Парткод: | 2FB07620 |
| Деталь: | HOOK VERTICAL FEED |
| Парткод: | 2FB07560 |
| Деталь: | SPRING C PULLEY |
| Парткод: | 3H608230 |
| Деталь: | RIGHT GUIDE A VF |
| Парткод: | 302FB07521 |
| Деталь: | SPRING FEED PULLEY |
| Парткод: | 2FB07800 |
| Деталь: | SHAFT FEED PULLEY |
| Парткод: | 2FB07600 |
| Деталь: | PULLEY FEED SHIFT |
| Парткод: | 2BL21330 |
| Деталь: | RIGHT GUIDE B VF |
| Парткод: | 2FB07530 |
| Деталь: | SPRING FEED GUIDE |
| Парткод: | 2FB07810 |
| Деталь: | BUSHING FEED GUIDE |
| Парткод: | 302FB07870 |
| Деталь: | RIGHT HANDLE FEED RELEASE |
| Парткод: | 2FB07590 |
| Деталь: | PLATE EARTH VF A |
| Парткод: | 302FB07920 |
| Деталь: | PLATE EARTH VF B |
| Парткод: | 302FB07930 |
| Деталь: | LEFT GUIDE A |
| Парткод: | 2FB07700 |
| Деталь: | GROUND PLATE VFC A |
| Парткод: | 302FB07940 |
| Деталь: | GROUND PLATE VTC B |
| Парткод: | 302FB07950 |
| Деталь: | STAY V FEED COVER |
| Парткод: | 302FB07960 |
| Деталь: | HOLDER MP PE SW |
| Парткод: | 302FB17851 |
| Деталь: | UPPER DUCT FIXING |
| Парткод: | 2FB23080 |
| Деталь: | SPONGE UPPER DUCT FIXING |
| Парткод: | 2FB23090 |
| Деталь: | DUCT MAIN CHARGER |
| Парткод: | 2FB23060 |
| Деталь: | UPPER DUCT DEV |
| Парткод: | 302FB23030 |
| Деталь: | REAR CENTER DUCT A |
| Парткод: | 302FB23222 |
| Деталь: | REAR CENTER DUCT B |
| Парткод: | 302FB23232 |
| Деталь: | CENTER REAR DUCT C |
| Парткод: | 302FB23300 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC02B1001+H01 |
| Деталь: | FAN 80 FRONT COOLING |
| Парткод: | 302FB25330 |
| Деталь: | UPPER REAR DUCT B |
| Парткод: | 302FB23290 |
| Деталь: | FAN 60 COOLING |
| Парткод: | 2FB27190 |
| Деталь: | FRONT DUCT LSU B |
| Парткод: | 302FB23280 |
| Деталь: | REAR DUCT DLP A |
| Парткод: | 302FB23321 |
| Деталь: | REAR DUCT DLP B |
| Парткод: | 302FB23331 |
| Деталь: | SPONGE DLP DUCT |
| Парткод: | 302FB23450 |
| Деталь: | COVER SAFETY SWITCH |
| Парткод: | 2FB04250 |
| Деталь: | FILM UPPER REAR DUCT |
| Парткод: | 302FB23340 |
| Деталь: | CLAMP, CKN-10 (KITAGAWA) |
| Парткод: | M2105970 |
| Деталь: | LOWER REAR DUCT |
| Парткод: | 302FB23241 |
| Деталь: | MOUNT REAR FAN |
| Парткод: | 302FB23522 |
| Деталь: | FAN COOLING 120 |
| Парткод: | 302FB25341 |
| Деталь: | DUCT REAR FAN |
| Парткод: | 302FB23511 |
| Деталь: | OZONE FILTER |
| Парткод: | 302FB23011 |
| Деталь: | FAN 80 CENTER COOLING |
| Парткод: | 302FB25320 |
| Деталь: | SPONGE REAR DUCT FAN |
| Парткод: | 302FB23600 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | LEVER SEPARATION RE |
| Парткод: | 2FB06170 |
| Деталь: | LEVER SEPARATION |
| Парткод: | 2FB06180 |
| Деталь: | LOWER HOUSING FEED 1/2 |
| Парткод: | 2FB06020 |
| Деталь: | BEARING MR74ZZ |
| Парткод: | 2BG15540 |
| Деталь: | MOUNT SPRING |
| Парткод: | 302FB09251 |
| Деталь: | SPRING SEPARATION |
| Парткод: | 302FB09260 |
| Деталь: | LOWER SHAFT FEED |
| Парткод: | 302FB06091 |
| Деталь: | TORQUE LIMITER MP |
| Парткод: | 2FB17610 |
| Деталь: | LOWER PULLEY FEED |
| Парткод: | 2FB06080 |
| Деталь: | RING STOPPER 4 |
| Парткод: | 5MVL177DN001 |
| Деталь: | BUSHING LOWER PULLEY |
| Парткод: | 302FB06830 |
| Деталь: | MOUNT MOTOR |
| Парткод: | 2FB06160 |
| Деталь: | MOTOR FEED |
| Парткод: | 2FB27110 |
| Деталь: | WIRE PRIMARY PF UNIT |
| Парткод: | 302FB27471 |
| Деталь: | SHAFT IDLE |
| Парткод: | 2FB06110 |
| Деталь: | GEAR,16 IDLE |
| Парткод: | 2AV22310 |
| Деталь: | HOUSING LEADING FEED |
| Парткод: | 2FB06030 |
| Деталь: | PULLEY LEADING FEED |
| Парткод: | 2FB06040 |
| Деталь: | SHAFT LEADING FEED |
| Парткод: | 2FB06050 |
| Деталь: | PULLEY FEED |
| Парткод: | 2FB06060 |
| Деталь: | SHAFT FEED |
| Парткод: | 2FB06070 |
| Деталь: | UPPER GEAR,PAPER FEED |
| Парткод: | 2BC06790 |
| Деталь: | SHAFT WEIGHT |
| Парткод: | 2FB06120 |
| Деталь: | BUSH 6 EW |
| Парткод: | 2BG22970 |
| Деталь: | HOLDER LOWER SEP |
| Парткод: | 302FB09060 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | FILM SEPARATION |
| Парткод: | 302FB09430 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | FILM FEED A |
| Парткод: | 302FB09350 |
| Деталь: | FILM FEED SPRING F |
| Парткод: | 302FB09451 |
| Деталь: | FILM FEED SPRING R |
| Парткод: | 302FB09461 |
| Деталь: | STOPPER 3 /2BT1107 A4 |
| Парткод: | 5MVX111DN007 |
| Деталь: | SHAFT GUIDE PULLEY |
| Парткод: | 2FB06220 |
| Деталь: | UPPER PULLEY,DECK CONVEYING |
| Парткод: | 2BC07520 |
| Деталь: | GEAR FEED 27 |
| Парткод: | 302FB06230 |
| Деталь: | CONNECTOR 292254-8 |
| Парткод: | 7YCC08B1003+H01 |
| Деталь: | JOINT DRIVE |
| Парткод: | 302FB06151 |
| Деталь: | PARTS,CASSETTE FEED ASSY |
| Парткод: | 302FB93241 |
| Деталь: | PARTS,LOWER PULLEY FEED ASSY SP |
| Парткод: | 302FB94030 |
| Деталь: | PARTS,UPPER PULLEY FEED ASSY SP |
| Парткод: | 302FB94020 |
| Деталь: | MOUNT C PULLEY |
| Парткод: | 3H608100 |
| Деталь: | HOLDER C PULLEY |
| Парткод: | 3H608090 |
| Деталь: | MOUNT DUPLEX PULLEY |
| Парткод: | 3H610050 |
| Деталь: | SPRING C PULLEY |
| Парткод: | 3H608230 |
| Деталь: | FRAME DUPLEX |
| Парткод: | 3H610030 |
| Деталь: | SHAFT C PULLEY |
| Парткод: | 3H608150 |
| Деталь: | PULLEY CONVEYING |
| Парткод: | 3H608200 |
| Деталь: | RACK DUPLEX UNIT |
| Парткод: | 3H610210 |
| Деталь: | REINFORCEMENT D RACK |
| Парткод: | 3H610230 |
| Деталь: | TORQUE LIMITER DUPLEX |
| Парткод: | 3H610280 |
| Деталь: | GUIDE DUPLEX |
| Парткод: | 3H610040 |
| Деталь: | GEAR DUPLEX UNIT |
| Парткод: | 3H622260 |
| Деталь: | MOUNT D RACK |
| Парткод: | 3H610190 |
| Деталь: | FELT DUPLEX |
| Парткод: | 3H610240 |
| Деталь: | ROLLER CIS |
| Парткод: | 3H610020 |
| Деталь: | BUSH CIS ROLLER |
| Парткод: | 3H610150 |
| Деталь: | FRONT HOOK CIS ROLLER |
| Парткод: | 3H610080 |
| Деталь: | REAR HOOK CIS ROLLER |
| Парткод: | 3H610090 |
| Деталь: | GEAR CIS ROLLER 20 |
| Парткод: | 3H622020 |
| Деталь: | GEAR CIS IDLE 21 |
| Парткод: | 3H622010 |
| Деталь: | MOUNT DUPLEX UNIT |
| Парткод: | 3H610060 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | SPRING HOOK |
| Парткод: | 3HL07240 |
| Деталь: | FULCRUM SHAFT D UNIT |
| Парткод: | 3H610070 |
| Деталь: | LOWER FRONT LEVER |
| Парткод: | 3H602080 |
| Деталь: | COVER D UNIT |
| Парткод: | 3H610270 |
| Деталь: | STOPPER D UNIT |
| Парткод: | 3H610180 |
| Деталь: | GROUND PLATE CIS ROLLER |
| Парткод: | 303H610370 |
| Деталь: | FRONT SHEET DUPLEX |
| Парткод: | 303H610340 |
| Деталь: | REAR SHEET DUPLEX |
| Парткод: | 303H610350 |
| Деталь: | REINFORCEMENT DUPLEX |
| Парткод: | 303H610360 |
| Деталь: | LOWER SHEET DUPLEX |
| Парткод: | 303H610380 |
| Деталь: | HOLDER CONT SW3 |
| Парткод: | 302FB02630 |
| Деталь: | HOLDER CONT SW1 |
| Парткод: | 2FB02610 |
| Деталь: | WIRE CASSETTE LENGTH SW |
| Парткод: | 2FB27510 |
| Деталь: | SWITCH,SIZE |
| Парткод: | 35927420 |
| Деталь: | MOUNT CASSETTE DRAWER |
| Парткод: | 2FB07240 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC08B2046+H02 |
| Деталь: | SCREW B |
| Парткод: | 2BG02420 |
| Деталь: | HOLDER CASSETTE SW |
| Парткод: | 2FB07280 |
| Деталь: | SWITCH,COVER OPEN |
| Парткод: | 66127010 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | MOUNT PAPER DETECTION |
| Парткод: | 2FB07270 |
| Деталь: | SWITCH PAPER DETECTION |
| Парткод: | 2FB27070 |
| Деталь: | WIRE DECK REMAINDER SW |
| Парткод: | 2FB27620 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610001++H01 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610004++H01 |
| Деталь: | SUPPORT PLATE HOOK SHAFT |
| Парткод: | 2FB19230 |
| Деталь: | COVER POWER SOURCE |
| Парткод: | 302FB26223 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610003++H01 |
| Деталь: | WIRE HEATER CONTROL |
| Парткод: | 2FB27920 |
| Деталь: | WIRE CASSETTE PWB |
| Парткод: | 302FB27713 |
| Деталь: | PIN CONNECTOR |
| Парткод: | 2FB08460 |
| Деталь: | WIRE DECK PWB 1 |
| Парткод: | 302FB27681 |
| Деталь: | PIN,DRAWER SIDE CONVEYING |
| Парткод: | 3CZ02240 |
| Деталь: | WIRE MAIN |
| Парткод: | 302FB27301 |
| Деталь: | PIN DRAWER B |
| Парткод: | 302FB16440 |
| Деталь: | WIRE SCANNER POWER |
| Парткод: | 2FB27910 |
| Деталь: | WIRE PRIMARY |
| Парткод: | 2FB27320 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | POWER SUPPLY PWB 100 |
| Парткод: | 2FB28130 |
| Деталь: | POWER SUPPLY PWB 200 |
| Парткод: | 2FB28140 |
| Деталь: | SPACER,KGLS-3S |
| Парткод: | M2108000 |
| Деталь: | MOUNT POWER SOURCE |
| Парткод: | 2FB26040 |
| Деталь: | MOUNT DU PWB |
| Парткод: | 302FB26171 |
| Деталь: | SPACER,KGPS-3S |
| Парткод: | M2108080 |
| Деталь: | DUPLEX PWB ASSY |
| Парткод: | 302FB01052 |
| Деталь: | WIRE FUSER MOTOR |
| Парткод: | 2FB27700 |
| Деталь: | CASE HIGH VOLTAGE CATCH |
| Парткод: | 2FB08240 |
| Деталь: | TERMINAL PTC CATCH |
| Парткод: | 2FB08250 |
| Деталь: | TERMINAL DB CATCH |
| Парткод: | 2FB08270 |
| Деталь: | TERMINAL MAIN |
| Парткод: | 2FB08350 |
| Деталь: | TERMINAL GRID |
| Парткод: | 2FB08360 |
| Деталь: | GROUND PLATE HV |
| Парткод: | 2FB08400 |
| Деталь: | HIGH VOLTAGE PWB MC |
| Парткод: | 2FB28150 |
| Деталь: | TERMINAL DLP CATCH |
| Парткод: | 302FB08490 |
| Деталь: | FAN DRIVE PCB ASSY |
| Парткод: | 302FB01250 |
| Деталь: | ACCESS.SPACER |
| Парткод: | 7YZM510001++H01 |
| Деталь: | SENSOR HUMIDITY |
| Парткод: | 2FB27060 |
| Деталь: | WIRE OPTION DECK |
| Парткод: | 2FB27810 |
| Деталь: | MOUNT SIDE CONNECTOR |
| Парткод: | 302FB26201 |
| Деталь: | LID KMAS |
| Парткод: | 302FB26270 |
| Деталь: | WIRE HIGH VOLTAGE PWB |
| Парткод: | 302FB28730 |
| Деталь: | CORE 15-26X13 |
| Парткод: | 2AV27440 |
| Деталь: | MOUNT POWER SOURCE SUPPLY |
| Парткод: | 2FB26020 |
| Деталь: | INLET ASSY |
| Парткод: | 302FB01141 |
| Деталь: | FERRITE CORE |
| Парткод: | 7YBCP8P8E001H01 |
| Деталь: | MOUNT POWER SOURCE SUPPLY 120 |
| Парткод: | 302FB26320 |
| Деталь: | ACCESS.BUSHING |
| Парткод: | 7YZM120001++H01 |
| Деталь: | POWER CORD(120) |
| Парткод: | 302FB27221 |
| Деталь: | MOUNT CONT SW |
| Парткод: | 302FB02810 |
| Деталь: | SPRING CONT SW |
| Парткод: | 302FB02820 |
| Деталь: | ACCESS.SPACER |
| Парткод: | 7YZM510003++H01 |
| Деталь: | FILM DU HOOK |
| Парткод: | 302FB26460 |
| Деталь: | FILM COVER POWER SOURCE |
| Парткод: | 302FB26520 |
| Деталь: | LEFT COVER CONVEYING |
| Парткод: | 2FB04520 |
| Деталь: | SPACER, KGLS-8RT(KITAGAWA) |
| Парткод: | M2108930 |
| Деталь: | LABEL JAM A1 |
| Парткод: | 302FB05090 |
| Деталь: | WIRE SADDLE,RLWS-1T V0(KITAGAWA) |
| Парткод: | M21AK010 |
| Деталь: | WIRE SADDLE,RLWS-1515T V0(KITAGAWA) |
| Парткод: | M21AK050 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | HOOK CONVEYING RELEASE |
| Парткод: | 2FB16170 |
| Деталь: | PIN DRUM LIFT |
| Парткод: | 2FB16280 |
| Деталь: | SPRING CONVEYING RELEASE |
| Парткод: | 302FB16340 |
| Деталь: | SHAFT TRANSFER RELEASE |
| Парткод: | 2FB16190 |
| Деталь: | SUPPORT PLATE,TRANSFER RELEASE |
| Парткод: | 2BC16171 |
| Деталь: | PULLEY,CLEANING UNIT |
| Парткод: | 27307190 |
| Деталь: | SHAFT,TRANSFER RELEASE PULLEY |
| Парткод: | 2BC16660 |
| Деталь: | SPRING TRANSFER RELEASE |
| Парткод: | 302FB16380 |
| Деталь: | PIN,TRANSFER RELEASE |
| Парткод: | 302BC16651 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | PIN ROLLER RELEASE LEVER |
| Парткод: | 302FB16320 |
| Деталь: | TERMINAL A,TC CATCHER |
| Парткод: | 61716260 |
| Деталь: | FAN 60 COOLING |
| Парткод: | 2FB27190 |
| Деталь: | DUCT CONVEYING |
| Парткод: | 302FB23100 |
| Деталь: | HIGH VOLTAGE PWB TC |
| Парткод: | 2FB28160 |
| Деталь: | WIRE REG MOT JUNCTION |
| Парткод: | 2FB27440 |
| Деталь: | PLATE EARTH VF B |
| Парткод: | 302FB07930 |
| Деталь: | WIRE CONVEYING UNIT |
| Парткод: | 2FB27410 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | GEAR 33 CONVEYING IDLE |
| Парткод: | 2FB20700 |
| Деталь: | GEAR 38T |
| Парткод: | 28902020 |
| Деталь: | GEAR 27,FEED |
| Парткод: | 2BC22250 |
| Деталь: | LOWER DUCT,FIXING EJECT |
| Парткод: | 2BC20500 |
| Деталь: | STOPPER,FIXING EJECT GUIDE |
| Парткод: | 2BC20250 |
| Деталь: | HANDLE CONVEYING |
| Парткод: | 2FB16260 |
| Деталь: | SPACER CONVEYING HANDLE |
| Парткод: | 302FB16330 |
| Деталь: | LABEL JAM A2 |
| Парткод: | 302FB05100 |
| Деталь: | FAN COOLING(60-15TH) |
| Парткод: | 302FB25130 |
| Деталь: | GEAR FUSER EJECT JOINT |
| Парткод: | 2FB21110 |
| Деталь: | FILM HIGH VOLTAGE PWB |
| Парткод: | 302FB16350 |
| Деталь: | STAY TRANSFER |
| Парткод: | 2FB16040 |
| Деталь: | LABEL UNIT REPLACEMENT |
| Парткод: | 302FB05080 |
| Деталь: | IDLE BELT ROLLER |
| Парткод: | 2FB16050 |
| Деталь: | BEARING 686ZZ |
| Парткод: | G3001360 |
| Деталь: | SPRING TRANSFER ROLLER |
| Парткод: | 2FB16210 |
| Деталь: | ROLLER TRANSFER |
| Парткод: | 2FB16240 |
| Деталь: | BUSHING,PRESSING ROLLER |
| Парткод: | 63520170 |
| Деталь: | BUSHING,IDLE ROLLER |
| Парткод: | 36716240 |
| Деталь: | GROUND PLATE TRANSFER |
| Парткод: | 302FB16111 |
| Деталь: | ELECTRODE,TRANSFER |
| Парткод: | 36716290 |
| Деталь: | SPRING TRANS ELECTRODE |
| Парткод: | 302FB16420 |
| Деталь: | ELECTRODE TRANSFER |
| Парткод: | 2FB16250 |
| Деталь: | FRONT FRAME TURN |
| Парткод: | 2FB16090 |
| Деталь: | BUSH 8 EW |
| Парткод: | 2BG22950 |
| Деталь: | GROUND PLATE TURN |
| Парткод: | 2FB16120 |
| Деталь: | BEARING,DEVELOPING UNIT |
| Парткод: | 27505290 |
| Деталь: | REAR FRAME TURN |
| Парткод: | 2FB16100 |
| Деталь: | ROLLER BELT DRIVE |
| Парткод: | 2FB16060 |
| Деталь: | MOUNT M3A |
| Парткод: | 302AR09201 |
| Деталь: | PARTS TC BELT SP |
| Парткод: | 302FB93220 |
| Деталь: | BEARING,688ZZ |
| Парткод: | 60912270 |
| Деталь: | JOINT TRANSFER DRIVE |
| Парткод: | 2FB16130 |
| Деталь: | LOWER FRONT GUIDE TRANS |
| Парткод: | 302FB16181 |
| Деталь: | SPRING PRE TRANSFER |
| Парткод: | 2FB16220 |
| Деталь: | WIRE TC FRAME GND |
| Парткод: | 2FB27460 |
| Деталь: | TC GROUND ROLLER |
| Парткод: | 302FB16370 |
| Деталь: | FILM TRANSFER |
| Парткод: | 302FB16410 |
| Деталь: | ADJUSTING PLATE GROUND |
| Парткод: | 302FB16430 |
| Деталь: | REAR FILM TRANSFER |
| Парткод: | 302FB16300 |
| Деталь: | RING STOPPER 6 |
| Парткод: | 5MVL177DN002 |
| Деталь: | LABEL CAUTION FUSER |
| Парткод: | 302FB05250 |
| Деталь: | LABEL HIGH VOLTAGE CAUTION |
| Парткод: | 302FB05400 |
| Деталь: | SPRING,JOINT |
| Парткод: | 28122160 |
| Деталь: | STOPPER HOOK |
| Парткод: | 302FB21420 |
| Деталь: | PIN FUSER COVER |
| Парткод: | 2FB20860 |
| Деталь: | DAMPER EJECT COVER |
| Парткод: | 302FB21430 |
| Деталь: | LABEL JAM A4-A6 |
| Парткод: | 302FB05390 |
| Деталь: | REAR HOLDER TRANSFER CLEANING |
| Парткод: | 302FB16390 |
| Деталь: | REAR BRUSH TRANSFER CLEANING |
| Парткод: | 302FB16400 |
| Деталь: | SHEET UPPER DU |
| Парткод: | 302FB09760 |
| Деталь: | REAR GUIDE TRANSFER |
| Парткод: | 302FB16290 |
| Деталь: | PARTS,TC BELT ASSY |
| Парткод: | 302FB93061 |
| Деталь: | PLATE DRIVE MAIN R |
| Парткод: | 2FB22060 |
| Деталь: | MOTOR MAIN |
| Парткод: | 2FB27020 |
| Деталь: | GEAR 82/33 CLD |
| Парткод: | 2FB22110 |
| Деталь: | MOTOR LIFT CASSETTE |
| Парткод: | 2FB07250 |
| Деталь: | PULLEY 19 DRIVE |
| Парткод: | 2FB22900 |
| Деталь: | BELT CLEANING DRIVE |
| Парткод: | 2FB22120 |
| Деталь: | MOTOR LIFT DECK |
| Парткод: | 302FB07300 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | SHAFT CLEANING DRIVE |
| Парткод: | 2FB22450 |
| Деталь: | GEAR 64 DLP |
| Парткод: | 2FB22100 |
| Деталь: | PULLEY 22 CL |
| Парткод: | 2FB22410 |
| Деталь: | SHAFT DRUM DRIVE |
| Парткод: | 2FB22010 |
| Деталь: | COUPLING DRUM DRIVE |
| Парткод: | 2FB22020 |
| Деталь: | SPRING DRUM DRIVE |
| Парткод: | 2FB22070 |
| Деталь: | BEARING 15/28 DRUM |
| Парткод: | 302FB08550 |
| Деталь: | GEAR 183 DRUM DRIVE |
| Парткод: | 2FB22030 |
| Деталь: | PLATE DRUM DRIVE |
| Парткод: | 2FB22270 |
| Деталь: | HOLDER MAIN DRIVE |
| Парткод: | 302FB22041 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | SPRING DLP DRIVE |
| Парткод: | 2FB22430 |
| Деталь: | SPRING CL DRIVE |
| Парткод: | 2FB22460 |
| Деталь: | JOINT, DEVELOPING DRIVE |
| Парткод: | 33922400 |
| Деталь: | COUPLING DLP DRIVE |
| Парткод: | 2FB22760 |
| Деталь: | TENSION PLATE CL |
| Парткод: | 2FB22440 |
| Деталь: | PULLEY TENSION |
| Парткод: | 2FB22280 |
| Деталь: | SPRING, BLADE |
| Парткод: | 72418140 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | GEAR 44 BYPASS |
| Парткод: | 2FB22670 |
| Деталь: | BUSHING DRUM EARTH |
| Парткод: | 302FB08560 |
| Деталь: | GROUND PLATE DRUM B |
| Парткод: | 302FB08570 |
| Деталь: | GEAR 25 DLP |
| Парткод: | 302FB11100 |
| Деталь: | GEAR 70 DLP |
| Парткод: | 302FB11020 |
| Деталь: | SHAFT DLP ONEWAY |
| Парткод: | 302FB11030 |
| Деталь: | SHAFT DLP JOINT |
| Парткод: | 302FB11040 |
| Деталь: | GEAR 30/50 DLP JOINT |
| Парткод: | 302FB11050 |
| Деталь: | PLATE DLP JOINT |
| Парткод: | 302FB11060 |
| Деталь: | GEAR 40 DLP JOINT |
| Парткод: | 302FB11080 |
| Деталь: | GEAR 40 DLP |
| Парткод: | 302FB11110 |
| Деталь: | POLY WASHER 8.2X9.5X0.5 |
| Парткод: | 302FB11140 |
| Деталь: | SPACER MAIN DRIVE |
| Парткод: | 302FB11150 |
| Деталь: | BEARING MF128ZZ |
| Парткод: | 302FB11160 |
| Деталь: | MOTOR DLP |
| Парткод: | 302FB25300 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | MOUNT DLP DRIVE |
| Парткод: | 302FB11130 |
| Деталь: | JOINT DEVELOPING DRIVE |
| Парткод: | 302FB11170 |
| Деталь: | GROUND PLATE DLP INPUT |
| Парткод: | 302FB11180 |
| Деталь: | LABEL SIZE (METRIC) |
| Парткод: | 002FB12710 |
| Деталь: | LABEL SIZE (INCH) |
| Парткод: | 002FB12720 |
| Деталь: | LEFT ORIGINAL SIZE INDICATOR |
| Парткод: | 002A612201 |
| Деталь: | STANDARD PLATE SHADING |
| Парткод: | 002FB12090 |
| Деталь: | CONTACT GLASS |
| Парткод: | 05912010 |
| Деталь: | REAR SIZE INDICATOR (M) |
| Парткод: | 002FB12690 |
| Деталь: | REAR SIZE INDICATOR (I) |
| Парткод: | 002FB12700 |
| Деталь: | FRONT SIZE INDICATOR |
| Парткод: | 002FB12680 |
| Деталь: | CONTACT GLASS,ADF |
| Парткод: | 2BC12170 |
| Деталь: | SPONGE DUST SHIELD |
| Парткод: | 002FB12460 |
| Деталь: | HOLDER,ADF CONTACT GLASS |
| Парткод: | 2AC12280 |
| Деталь: | CUSHION,CONTACT GLASS |
| Парткод: | 29812291 |
| Деталь: | COVER SCREW |
| Парткод: | 002BG04560 |
| Деталь: | UPPER FILM,SCANNER |
| Парткод: | 002BC12161 |
| Деталь: | UPPER FILM SCANNER A |
| Парткод: | 002FB12780 |
| Деталь: | UPPER FILM SCANNER B |
| Парткод: | 002FB12790 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610001++H01 |
| Деталь: | CLAMP,EMT-5N(TAKEUCHI) |
| Парткод: | M7005000 |
| Деталь: | SCANNER PWB ASSY (SP) |
| Парткод: | 002FB68140 |
| Деталь: | COVER INVERTER |
| Парткод: | 2FB12280 |
| Деталь: | WIRE SCANNER CONTROL |
| Парткод: | 002FB28770 |
| Деталь: | GROUNDING SHIELD JOINT |
| Парткод: | 7ZEGSTRFM150H02 |
| Деталь: | EARTH S-BOX B |
| Парткод: | 002FB26400 |
| Деталь: | WIRE SCANNER FRAME GND 2 |
| Парткод: | 002FB28790 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSSTG42160H01 |
| Деталь: | ACCESS.CLAMP |
| Парткод: | 7YZM010001++H01 |
| Деталь: | CORE 15-26X10 |
| Парткод: | 2AV27440 |
| Деталь: | PARTS,CONTACT GLASS ASSY(M) |
| Парткод: | 002FB90190 |
| Деталь: | PARTS,CONTACT GLASS ASSY(I) |
| Парткод: | 002FB90200 |
| Деталь: | PARTS,CONTACT GLASS ADF ASSY(I) |
| Парткод: | 002FB90210 |
| Деталь: | HOUSING DECK FEED 1/4 |
| Парткод: | 2FB06500 |
| Деталь: | LEVER D FEED SW |
| Парткод: | 2FB06620 |
| Деталь: | ROLLER DECK FEED |
| Парткод: | 2FB06550 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | PULLEY DECK |
| Парткод: | 2FB06600 |
| Деталь: | BELT DECK FEED |
| Парткод: | 2FB06670 |
| Деталь: | RING STOPPER 4 |
| Парткод: | 5MVL177DN001 |
| Деталь: | SHAFT LOWER DECK A |
| Парткод: | 2FB06530 |
| Деталь: | GEAR IDLE 50 |
| Парткод: | 302FB09300 |
| Деталь: | GEAR IDLE B |
| Парткод: | 2FB06570 |
| Деталь: | FILM DECK SEPARATION |
| Парткод: | 302FB09470 |
| Деталь: | EDGING,EDS-0607L(KITAGAWA) |
| Парткод: | M2104390 |
| Деталь: | EDGING, EDS-17L(KITAGAWA) |
| Парткод: | M2104250 |
| Деталь: | SPRING ACTUATOR L |
| Парткод: | 2BL21260 |
| Деталь: | BEARING,DRIVE |
| Парткод: | 68822330 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC22K2001+H01 |
| Деталь: | WIRE DECK MOTOR |
| Парткод: | 2FB27670 |
| Деталь: | WIRE DECK UNIT SW |
| Парткод: | 2FB27360 |
| Деталь: | BAND,RSG-130-V0(KITAGAWA) |
| Парткод: | M21AH010 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | SHAFT LOWER DECK B |
| Парткод: | 302FB06541 |
| Деталь: | GEAR DECK |
| Парткод: | 302FB06591 |
| Деталь: | GEAR 27/24 ONE-WAY L |
| Парткод: | 2FB19620 |
| Деталь: | MOUNT MOTOR |
| Парткод: | 2FB06160 |
| Деталь: | MOTOR FEED |
| Парткод: | 2FB27110 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | LEVER SEPARATION RE |
| Парткод: | 2FB06170 |
| Деталь: | LEVER SEPARATION |
| Парткод: | 2FB06180 |
| Деталь: | FILM FEED SPRING F |
| Парткод: | 302FB09451 |
| Деталь: | MOUNT SPRING |
| Парткод: | 302FB09251 |
| Деталь: | SPRING SEPARATION |
| Парткод: | 302FB09260 |
| Деталь: | FILM FEED SPRING R |
| Парткод: | 302FB09461 |
| Деталь: | GROUND PLATE DECK UNIT |
| Парткод: | 302FB09320 |
| Деталь: | CUT WASHER 3 |
| Парткод: | 2BL16290 |
| Деталь: | BEARING, 686ZZNR |
| Парткод: | 74808080 |
| Деталь: | STOPPER 3 /2BT1107 A4 |
| Парткод: | 5MVX111DN007 |
| Деталь: | LABEL DECK TEMP |
| Парткод: | 302FB05430 |
| Деталь: | LOWER SHAFT FEED |
| Парткод: | 302FB06091 |
| Деталь: | TORQUE LIMITER MP |
| Парткод: | 2FB17610 |
| Деталь: | LOWER PULLEY FEED |
| Парткод: | 2FB06080 |
| Деталь: | SHAFT IDLE |
| Парткод: | 2FB06110 |
| Деталь: | GEAR,16 IDLE |
| Парткод: | 2AV22310 |
| Деталь: | HOUSING LEADING FEED |
| Парткод: | 2FB06030 |
| Деталь: | PULLEY LEADING FEED |
| Парткод: | 2FB06040 |
| Деталь: | SHAFT LEADING FEED |
| Парткод: | 2FB06050 |
| Деталь: | PULLEY FEED |
| Парткод: | 2FB06060 |
| Деталь: | SHAFT FEED |
| Парткод: | 2FB06070 |
| Деталь: | UPPER GEAR,PAPER FEED |
| Парткод: | 2BC06790 |
| Деталь: | SHAFT WEIGHT |
| Парткод: | 2FB06120 |
| Деталь: | BUSH 6 EW |
| Парткод: | 2BG22970 |
| Деталь: | BEARING MR74ZZ |
| Парткод: | 2BG15540 |
| Деталь: | BUSHING LOWER PULLEY |
| Парткод: | 302FB06830 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | FILM SEPARATION |
| Парткод: | 302FB09430 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | COVER DECK MOTOR WIRE |
| Парткод: | 302FB09110 |
| Деталь: | GUIDE DECK FEED |
| Парткод: | 302FB09120 |
| Деталь: | SHAFT LOWER DECK C |
| Парткод: | 302FB09310 |
| Деталь: | GROUND PLATE MOTOR |
| Парткод: | 302FB09150 |
| Деталь: | GROUND PLATE FEED |
| Парткод: | 302FB09140 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSSTG77015H01 |
| Деталь: | GEAR FEED 27 |
| Парткод: | 302FB06230 |
| Деталь: | JOINT DRIVE |
| Парткод: | 302FB06151 |
| Деталь: | UPPER PULLEY, DECK CONVEYING |
| Парткод: | 2BC07520 |
| Деталь: | SHAFT GUIDE PULLEY |
| Парткод: | 2FB06220 |
| Деталь: | GEAR FEED |
| Парткод: | 2FB06130 |
| Деталь: | PARTS,MOTER DECK FEED ASSY |
| Парткод: | 302FB93250 |
| Деталь: | PARTS,LOWER PULLEY FEED ASSY SP |
| Парткод: | 302FB94030 |
| Деталь: | PARTS,UPPER PULLEY FEED ASSY SP |
| Парткод: | 302FB94020 |
| Деталь: | PARTS,UPPER LEFT DECK FEED ASSY |
| Парткод: | 302FB93271 |
| Деталь: | PARTS,UPPER RIGHT DECK FEED ASSY |
| Парткод: | 302FB93282 |
| Деталь: | BASE DECK |
| Парткод: | 2FB07100 |
| Деталь: | FRONT FRAME B,DECK |
| Парткод: | 302BC07232 |
| Деталь: | REAR FRAME B,DECK |
| Парткод: | 302BC07241 |
| Деталь: | LIFT PLATE,DECK |
| Парткод: | 2BC07170 |
| Деталь: | PAD, LI FT |
| Парткод: | 3BC07320 |
| Деталь: | ACTUATOR REM DETECTION |
| Парткод: | 302FB07890 |
| Деталь: | SPACER,DECK LIFT |
| Парткод: | 2BC07120 |
| Деталь: | SHAFT LCF LIFT |
| Парткод: | 2FB07290 |
| Деталь: | FRONT PULLEY,LIFT DRIVE |
| Парткод: | 2BC07020 |
| Деталь: | HOLDER, WIRE |
| Парткод: | 2BC07040 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | PULLEY, LIFT WIRE |
| Парткод: | 2BC07050 |
| Деталь: | LEFT WIRE B,LIFT |
| Парткод: | 2BC07340 |
| Деталь: | HOLDER,WIRE PULLEY |
| Парткод: | 2BC07060 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | LEFT WIRE A,LIFT |
| Парткод: | 2BC07330 |
| Деталь: | MOUNT,DECK DAMPER |
| Парткод: | 302BC07101 |
| Деталь: | DAMPER,DECK LIFT PLATE |
| Парткод: | 2BC07030 |
| Деталь: | GEAR,41 |
| Парткод: | 63822220 |
| Деталь: | GEAR 20 |
| Парткод: | 2BC07110 |
| Деталь: | FRONT CURSOR DECK |
| Парткод: | 302FB07460 |
| Деталь: | REAR CURSOR DECK |
| Парткод: | 302FB07430 |
| Деталь: | STOPPER B,TRAILING EDGE HOLDER DECK |
| Парткод: | 302BC07311 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | STOPPER 5 FUSER |
| Парткод: | 302FB20900 |
| Деталь: | LABEL,UPPER LIMIT |
| Парткод: | 2BC05240 |
| Деталь: | PROTECTING PLATE,DECK DAMPER |
| Парткод: | 2BC07890 |
| Деталь: | CUSHION,CASSETTE R |
| Парткод: | 60907170 |
| Деталь: | BUSH 6 EW |
| Парткод: | 2BG22970 |
| Деталь: | HANDLE CASSETTE |
| Парткод: | 2FB04310 |
| Деталь: | SHAFT DECK RELEASE |
| Парткод: | 2FB04640 |
| Деталь: | COVER DECK A |
| Парткод: | 2FB04290 |
| Деталь: | PLATE NUMBER |
| Парткод: | 2BL04310 |
| Деталь: | LEVER DECK RELEASE |
| Парткод: | 2FB04610 |
| Деталь: | WORKING PLATE DECK SHAFT |
| Парткод: | 2FB04650 |
| Деталь: | PIN DECK RELEASE |
| Парткод: | 2FB04670 |
| Деталь: | MOUNT DECK COVER |
| Парткод: | 2FB04340 |
| Деталь: | MOUNT DECK RELEASE |
| Парткод: | 2FB04660 |
| Деталь: | LABEL DECK |
| Парткод: | 302FB05280 |
| Деталь: | MOUNT BASE DECK SLIDER |
| Парткод: | 2FB07320 |
| Деталь: | MOUNT DECK HOOK |
| Парткод: | 2FB04580 |
| Деталь: | HOOK DECK RELEASE |
| Парткод: | 2FB04620 |
| Деталь: | SPRING DECK RELEASE |
| Парткод: | 302FB04680 |
| Деталь: | REAR REINFORCEMENT A DECK |
| Парткод: | 302FB07360 |
| Деталь: | REAR REINFORCEMENT B DECK |
| Парткод: | 302FB07370 |
| Деталь: | SHEET DECK REINFORCEMENT |
| Парткод: | 302FB07380 |
| Деталь: | SPRING DECK DAMPER |
| Парткод: | 302FB07410 |
| Деталь: | FILM,LIFT PLATE |
| Парткод: | 2BC07200 |
| Деталь: | MOUNT DK PWB |
| Парткод: | 302FB26181 |
| Деталь: | TONER SENSOR ASSY |
| Парткод: | 302FB01240 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC03B1002+H01 |
| Деталь: | SPACER, KGLS-3S |
| Парткод: | M2108000 |
| Деталь: | DECK PWB ASSY |
| Парткод: | 302FB01041 |
| Деталь: | SPACER,KGPS-3S |
| Парткод: | M2108080 |
| Деталь: | MOUNT CS PWB |
| Парткод: | 302FB26190 |
| Деталь: | SPACER,KGLS-3S |
| Парткод: | M2108000 |
| Деталь: | CASSETTE PWB ASSY |
| Парткод: | 2FB01030 |
| Деталь: | WIRE TRANSFER MOTOR |
| Парткод: | 2FB27870 |
| Деталь: | SPONGE SHUTTER |
| Парткод: | 2FB18420 |
| Деталь: | HOUSING TONER DISPOSAL |
| Парткод: | 2FB18510 |
| Деталь: | WIRE FUSER MOTOR |
| Парткод: | 2FB27700 |
| Деталь: | SPIRAL DISPOSAL |
| Парткод: | 2FB18530 |
| Деталь: | MOUNT DISPOSAL DRIVE |
| Парткод: | 2FB18540 |
| Деталь: | SHAFT DISPOSAL DRIVE |
| Парткод: | 2FB18550 |
| Деталь: | BUSHING B DISPOSAL |
| Парткод: | 2FB18560 |
| Деталь: | GEAR 30 DISPOSAL |
| Парткод: | 2FB18570 |
| Деталь: | GEAR 15 DISPOSAL |
| Парткод: | 2FB18580 |
| Деталь: | BUSHING 6 |
| Парткод: | 3CY07080 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | MOUNT DISPOSAL PIPE |
| Парткод: | 2FB18630 |
| Деталь: | COUPLING DISPOSAL |
| Парткод: | 302FB18720 |
| Деталь: | COVER V FEED |
| Парткод: | 302FB26210 |
| Деталь: | DISPOSAL TANK ASSY (option) |
| Парткод: | 2BC60010 |
| Деталь: | PIPE DISPOSAL A |
| Парткод: | 302FB18590 |
| Деталь: | PIPE DISPOSAL B |
| Парткод: | 302FB18600 |
| Деталь: | SPONGE DISPOSAL PIPE A |
| Парткод: | 302FB18680 |
| Деталь: | SPONGE DISPOSAL PIPE B |
| Парткод: | 302FB18690 |
| Деталь: | SPONGE DISPOSAL TANK A |
| Парткод: | 302FB18660 |
| Деталь: | SPONGE DISPOSAL TANK B |
| Парткод: | 302FB18670 |
| Деталь: | SPRING,DISPOSAL SPIRAL THRUST |
| Парткод: | 2BC18820 |
| Деталь: | BUSHING,DISPOSAL SPIRAL |
| Парткод: | 2BC18830 |
| Деталь: | HOLDER DISPOSAL SPIRAL THRUST |
| Парткод: | 302FB18710 |
| Деталь: | RAIL CASETTE LEFT |
| Парткод: | 302FB07900 |
| Деталь: | SLIDER DECK |
| Парткод: | 302FB07910 |
| Деталь: | SPRING CASS HOOK |
| Парткод: | 2BG06720 |
| Деталь: | HOOK CASSETTE |
| Парткод: | 2BG06420 |
| Деталь: | LEFT CASSETTE STAY |
| Парткод: | 2FB07090 |
| Деталь: | RETAINER CASSETTE HOOK |
| Парткод: | 302FB07350 |
| Деталь: | MOUNT CASSETTE SLIDER R |
| Парткод: | 2FB07220 |
| Деталь: | SLIDER CASSETTE B |
| Парткод: | 302FB07480 |
| Деталь: | RAIL CASSETTE R |
| Парткод: | 2FB07070 |
| Деталь: | RETAINER DECK RELEASE L |
| Парткод: | 2FB04600 |
| Деталь: | LOWER LEFT REINFORCEMENT |
| Парткод: | 302BC02102 |
| Деталь: | LEFT MOUNT IMAGE SLIDER |
| Парткод: | 2FB08510 |
| Деталь: | RETAINER DECK RELEASE R |
| Парткод: | 2FB04590 |
| Деталь: | RIGHT MOUNT DECK SLIDER |
| Парткод: | 2FB07200 |
| Деталь: | LEFT DUCT CLEANING |
| Парткод: | 2FB23040 |
| Деталь: | RIGHT MOUNT DECK SLIDER |
| Парткод: | 302FB02180 |
| Деталь: | RIGHT MOUNT IMAGE SLIDER |
| Парткод: | 2FB08530 |
| Деталь: | PIN CASSETTE RAIL |
| Парткод: | 2FB06710 |
| Деталь: | PULLEY CASSETTE RAIL |
| Парткод: | 2FB06900 |
| Деталь: | LEFT RAIL FRAME |
| Парткод: | 2FB06930 |
| Деталь: | COVER LEFT RAIL FRAME |
| Парткод: | 2FB06950 |
| Деталь: | FILM LEFT IMAGE SLIDER |
| Парткод: | 302FB08680 |
| Деталь: | RIGHT RAIL FRAME |
| Парткод: | 2FB06940 |
| Деталь: | STOPPER BYPASS TABLE |
| Парткод: | 2FB07330 |
| Деталь: | Left Slider |
| Парткод: | 2FB19530 |
| Деталь: | SPRING A LOWER GUIDE |
| Парткод: | 2FB19810 |
| Деталь: | RIGHT SLIDER |
| Парткод: | 2FB19520 |
| Деталь: | MOUNT,CONVEYING SLIDER |
| Парткод: | 2BC16310 |
| Деталь: | SLIDER COVEYING |
| Парткод: | 302FB16310 |
| Деталь: | PIN IMAGE FORMATION |
| Парткод: | 2FB08450 |
| Деталь: | SLIDER IMAGE FORMATION |
| Парткод: | 2FB08500 |
| Деталь: | STOPPER DECK FEED |
| Парткод: | 302FB07440 |
| Деталь: | SPRING DECK FEED STOPPER |
| Парткод: | 302FB07450 |
| Деталь: | GUIDE CF |
| Парткод: | 2DA26520 |
| Деталь: | Controller assy |
| Парткод: | 303JT47010 |
| Деталь: | PCB DIMM ASSY WITH SOFTWARE |
| Парткод: | 303JT01020 |
| Деталь: | MOUNT CONTROLLER PCB |
| Парткод: | 303JT26010 |
| Деталь: | ACCESS.CLAMP |
| Парткод: | 7YZM320001++H01 |
| Деталь: | SHEET RADIATOR (40set) |
| Парткод: | 3H827010 |
| Деталь: | PLATE OPTION /40613C0002 A4 |
| Парткод: | 5MMS636SD009 |
| Деталь: | COVER CF |
| Парткод: | 303JT39020 |
| Деталь: | LABEL OPT1 |
| Парткод: | 303JT34010 |
| Деталь: | LABEL HDD |
| Парткод: | 303JT34020 |
| Деталь: | SCANNER NIC ASSY |
| Парткод: | 3JR01010 |
| Деталь: | COPY TRAY(EXP) |
| Парткод: | 2A304190 |
| Деталь: | MOUNT,KEY COUNTER |
| Парткод: | 66060040 |
| Деталь: | COVER,KEY COUNTER |
| Парткод: | 2A360010 |
| Деталь: | RETAINER,KEY COUNTER COVER |
| Парткод: | 66060022 |
| Деталь: | RETAINER,KEY COUNTER |
| Парткод: | 66060030 |
| Деталь: | SOCKET ASSY, KEY COUNTER |
| Парткод: | 29236240 |
| Деталь: | KEY COUNTER |
| Парткод: | 82142540 |
| Деталь: | SET PARTS KEYCOUNTER NEW COLOR |
| Парткод: | 302A369705 |
| Деталь: | PIN B,POSITIONING |
| Парткод: | 18568120 |
| Деталь: | STOPPER WIRE ASSY SP |
| Парткод: | 35968110 |
| Деталь: | SHEET,DF ADJUSTMENT |
| Парткод: | 2A068021 |
| Деталь: | LABEL MAIN SW SET |
| Парткод: | 302FB05320 |
| Деталь: | PLATE SIZE C |
| Парткод: | 302FB05200 |
| Деталь: | PLATE SIZE IN |
| Парткод: | 302FB05210 |
| Деталь: | GUIDE CASE |
| Парткод: | 302FB04970 |
| Деталь: | POWER CORD(230) |
| Парткод: | 2AR27800 |
| Деталь: | POWER CODE AS(240) |
| Парткод: | 3029927232 |
| Деталь: | LABEL MP CAUTION 6NATIONS |
| Парткод: | 302FB05370 |
| Деталь: | LABEL MSP 6NATIONS |
| Парткод: | 303H605100 |
| Деталь: | LABEL MIXED LOADING 6NATIONS |
| Парткод: | 303H605130 |
| Деталь: | LABEL CAUTION 6NATIONS |
| Парткод: | 303H605170 |
| Деталь: | LABEL VFEED CAUTION 6NATIONS |
| Парткод: | 302FB05440 |
| Деталь: | SPECIAL TOOL FRAME RETAINING |
| Парткод: | 302FB68290 |
| Деталь: | +CONTER-SUNK HEAD TAP-TITE P M3X08(TRI |
| Парткод: | B2B63080 |
| Деталь: | PLATE CONT DRIVE |
| Парткод: | 2FB22320 |
| Деталь: | MOTOR TONER SUPPLY |
| Парткод: | 2FB27040 |
| Деталь: | GEAR 38 VERTICAL FEED |
| Парткод: | 2FB22640 |
| Деталь: | GEAR Z70S/Z16S |
| Парткод: | 2FB22340 |
| Деталь: | GEAR Z56S/Z20S |
| Парткод: | 2FB22350 |
| Деталь: | SHAFT DRIVE CONT |
| Парткод: | 302FB11070 |
| Деталь: | COUPLING CONTAINER |
| Парткод: | 2FB22380 |
| Деталь: | SPRING CONT DRIVE |
| Парткод: | 2FB22370 |
| Деталь: | HOLDER CONT DRIVE |
| Парткод: | 2FB22330 |
| Деталь: | BUSH DRIVE CONT 8 |
| Парткод: | 2BL22570 |
| Деталь: | GEAR JOINT CONT |
| Парткод: | 2FB22360 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | MOTOR BYPASS |
| Парткод: | 2FB27120 |
| Деталь: | RETAINER BYPASS DRIVE |
| Парткод: | 2FB22620 |
| Деталь: | GEAR 54 BYPASS |
| Парткод: | 2FB22680 |
| Деталь: | MOUNT BYPASS DRIVE |
| Парткод: | 2FB22610 |
| Деталь: | SHAFT BYPASS DRIVE |
| Парткод: | 2FB22780 |
| Деталь: | GEAR 44 BYPASS |
| Парткод: | 2FB22670 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | HOOK CASSETTE |
| Парткод: | 2BG06420 |
| Деталь: | SPRING DECK F HOOK |
| Парткод: | 2FB06640 |
| Деталь: | MOUNT D FEED HOOK |
| Парткод: | 2FB06630 |
| Деталь: | MOUNT, CONVEYING HOOK |
| Парткод: | 2BC16450 |
| Деталь: | HOOK,CONVEYING RETAINING |
| Парткод: | 2BC16460 |
| Деталь: | SPRING, CONVEYING HOOK |
| Парткод: | 2BC16470 |
| Деталь: | MOUNT EJECT PULLEY |
| Парткод: | 2FB22600 |
| Деталь: | GEAR 19/33 EJECT |
| Парткод: | 2FB22590 |
| Деталь: | MOTOR VERTICAL FEED |
| Парткод: | 2FB27170 |
| Деталь: | MOUNT VF MOTOR |
| Парткод: | 2FB22870 |
| Деталь: | RETAINER VF DRIVE |
| Парткод: | 2FB22630 |
| Деталь: | SPRING, BLADE |
| Парткод: | 72418140 |
| Деталь: | GEAR 32 VERTICAL FEED |
| Парткод: | 2FB22650 |
| Деталь: | PULLEY 32 VERTICAL FEED |
| Парткод: | 2FB22860 |
| Деталь: | GEAR 32 FEED C |
| Парткод: | 2FB22660 |
| Деталь: | TENSION PLATE VF DRIVE |
| Парткод: | 2FB22880 |
| Деталь: | PULLEY 26 VERTICAL FEED |
| Парткод: | 2FB22890 |
| Деталь: | BELT VERTICAL FEED |
| Парткод: | 2FB22850 |
| Деталь: | BELT EJECT DRIVE |
| Парткод: | 2FB22730 |
| Деталь: | PULLEY 20,DUPLEX CONVEYING |
| Парткод: | 68721640 |
| Деталь: | TENSION PLATE EJECT DRIVE |
| Парткод: | 2FB22740 |
| Деталь: | PLATE FUSER DRIVE |
| Парткод: | 302FB22482 |
| Деталь: | BUSHING, BYPASS CAM |
| Парткод: | 66222140 |
| Деталь: | MOTOR TFR |
| Парткод: | 2FB27090 |
| Деталь: | MOTOR FIXING |
| Парткод: | 302FB27231 |
| Деталь: | EDGING, EDS-0607U(KITAGAWA) |
| Парткод: | M2104260 |
| Деталь: | BEARING,688ZZNR |
| Парткод: | 28107400 |
| Деталь: | EDGING,EDS-1208U |
| Парткод: | M2104240 |
| Деталь: | GEAR 133 DUPLEX |
| Парткод: | 2FB22700 |
| Деталь: | GEAR 71 DUPLEX |
| Парткод: | 2FB22710 |
| Деталь: | GEAR 88 FUSER SMF |
| Парткод: | 302FB22960 |
| Деталь: | GEAR 82 TFR |
| Парткод: | 2FB22230 |
| Деталь: | GEAR 65 DISPOSAL |
| Парткод: | 2FB22260 |
| Деталь: | GEAR 29 DUPLEX |
| Парткод: | 2FB22720 |
| Деталь: | GEAR 40 FIXING |
| Парткод: | 2FB22560 |
| Деталь: | SHAFT FUSER CL DRIVE |
| Парткод: | 2FB22530 |
| Деталь: | LEVER,FIXING CLEANING DRIVE |
| Парткод: | 2A022340 |
| Деталь: | GEAR 19,SPIRAL ROLLER |
| Парткод: | 66018160 |
| Деталь: | SHAFT FUSER DRIVE |
| Парткод: | 2FB22540 |
| Деталь: | GEAR 19 FIXING |
| Парткод: | 2FB22580 |
| Цена: | 290 ₽ |
| Деталь: | SPRING FUSER JOINT |
| Парткод: | 2FB22920 |
| Деталь: | HOUSING FUSER DRIVE |
| Парткод: | 302FB22472 |
| Деталь: | BEARING MF128ZZ |
| Парткод: | 302FB11160 |
| Деталь: | BUSH 6 EW |
| Парткод: | 2BG22970 |
| Деталь: | SHAFT TFR |
| Парткод: | 2FB22250 |
| Деталь: | COUPLING TC DRIVE |
| Парткод: | 302FB22950 |
| Деталь: | SPRING FIXING DRIVE |
| Парткод: | 2FB22770 |
| Деталь: | GEAR 36 TFR |
| Парткод: | 2FB22240 |
| Деталь: | SPRING FUSER DRIVE |
| Парткод: | 2FB22910 |
| Деталь: | COUPLING FIXING JOINT |
| Парткод: | 2FB22490 |
| Деталь: | SPRING,CLEANING |
| Парткод: | 2AC18300 |
| Деталь: | SOLENOID FUSER WEB |
| Парткод: | 302FB25250 |
| Деталь: | JOINT TC DRIVE |
| Парткод: | 302FB22940 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | PLATE DLP MOTOR |
| Парткод: | 302FB11120 |
| Деталь: | GROUND PLATE MP MOTOR |
| Парткод: | 302FB07970 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610003++H01 |
| Деталь: | PARTS,CONT DRIVE ASSY |
| Парткод: | 302FB93110 |
| Деталь: | PARTS,BYPASS DRIVE ASSY |
| Парткод: | 302FB93150 |
| Деталь: | PARTS,VERTICAL FEED DRIVE ASSY |
| Парткод: | 302FB93140 |
| Деталь: | PARTS,FIXING DRIVE ASSY |
| Парткод: | 302FB93130 |
| Деталь: | MOUNT SAFETY SWITCH |
| Парткод: | 2FB26030 |
| Деталь: | SWITCH FRONT COVER |
| Парткод: | 2FB27210 |
| Деталь: | WIRE SADDLE,RLWS-3T V0(KITAGAWA) |
| Парткод: | M21AK030 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | SENSOR HUMIDITY |
| Парткод: | 2FB27060 |
| Деталь: | WIRE ENGINE PWB |
| Парткод: | 302FB27351 |
| Деталь: | PIN CONNECTOR |
| Парткод: | 2FB08460 |
| Деталь: | MOUNT BASE,POTENTIAL SENSOR |
| Парткод: | 2BC10070 |
| Деталь: | SENSOR SURFACE POTENTIAL |
| Парткод: | 302FB25090 |
| Деталь: | MOUNT POTENTIAL SENSOR |
| Парткод: | 302FB08540 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | COVER SENSOR SP |
| Парткод: | 2FB08410 |
| Деталь: | TONER SENSOR ASSY |
| Парткод: | 2FB01150 |
| Деталь: | HOLDER HUMIDITY SENSOR |
| Парткод: | 302FB10340 |
| Деталь: | COVER CASSETTE |
| Парткод: | 2FB04280 |
| Деталь: | HANDLE CASSETTE |
| Парткод: | 2FB04310 |
| Деталь: | MOUNT CASSETTE RELEASE |
| Парткод: | 302FB04630 |
| Деталь: | SPRING,PAD |
| Парткод: | 66106080 |
| Деталь: | LID,PAPER SIZE DETECTION |
| Парткод: | 33907160 |
| Деталь: | SHAFT, LIFT CASSETTE |
| Парткод: | 2BC06710 |
| Деталь: | GROUND PLATE,CASSETTE |
| Парткод: | 2BC07830 |
| Деталь: | WORK PLATE,LIFT CASSETTE |
| Парткод: | 302BC06091 |
| Деталь: | CUSHION,CASSETTE WORK PLATE |
| Парткод: | 33907210 |
| Деталь: | WORK PLATE,CASSETTE |
| Парткод: | 3033907021 |
| Деталь: | PAD, CASSETTE |
| Парткод: | 66107100 |
| Деталь: | PIN,CASSETTE WORK PLATE |
| Парткод: | 66007310 |
| Деталь: | RETAINER M4 |
| Парткод: | 3CY06030 |
| Деталь: | RACK CURSOR |
| Парткод: | 3CY06090 |
| Деталь: | TERMINAL,PAPER SIZE DETECTION |
| Парткод: | 2BC07860 |
| Деталь: | RAIL CURSOR A |
| Парткод: | 302FB07013 |
| Деталь: | FRONT CURSOR CASSETTE |
| Парткод: | 302FB07022 |
| Деталь: | LEVER CURSOR A |
| Парткод: | 302FB07032 |
| Деталь: | SPRING CURSOR |
| Парткод: | 2FB07060 |
| Деталь: | CASSETTE |
| Парткод: | 302BC06703 |
| Деталь: | CUSHION,CASSETTE R |
| Парткод: | 60907170 |
| Деталь: | CURSOR B,CASSETTE |
| Парткод: | 303CY06051 |
| Деталь: | LABEL,PAPER UPPER LIMIT |
| Парткод: | 61705110 |
| Деталь: | GEAR 20,CURSOR |
| Парткод: | 3CY06100 |
| Деталь: | SIZE DETECTION ASSY |
| Парткод: | 2FG01020 |
| Деталь: | WIRE CASSETTE UNIT |
| Парткод: | 302FB27662 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC08B2046+H01 |
| Деталь: | PIN CURSOR |
| Парткод: | 2FB07050 |
| Деталь: | CURSOR C,CASSETTE |
| Парткод: | 3CY06071 |
| Деталь: | LEVER,CASSETTE CURSOR |
| Парткод: | 33907080 |
| Деталь: | SPRING,CURSOR |
| Парткод: | 2BC06950 |
| Деталь: | LID C,CURSOR |
| Парткод: | 3CY06080 |
| Деталь: | RAIL C,CURSOR |
| Парткод: | 33907120 |
| Деталь: | DETECTION PLATE,PAPER SIZE |
| Парткод: | 303CY06120 |
| Деталь: | LABEL CASSETTE |
| Парткод: | 302FB05270 |
| Деталь: | LEVER CURSOR B |
| Парткод: | 302FB07042 |
| Деталь: | SPONGE LIFT CASSETTE |
| Парткод: | 302FB07470 |
| Деталь: | ADJUSTING PLATE CASSETTE |
| Парткод: | 302FB07340 |
| Деталь: | SUPPORT PLATE CASSETTE |
| Парткод: | 302FB07400 |
| Деталь: | PIN CASSETTE |
| Парткод: | 302FB07420 |
| Деталь: | RAIL CASSETTE C |
| Парткод: | 2BG06430 |
| Деталь: | PLATE NUMBER 3 /3CF0405 A4 |
| Парткод: | 5MVX321CE001 |
| Деталь: | PLATE NUMBER4 |
| Парткод: | 3CF04060 |
| Деталь: | Пружина узла отделения бумаги от фотовала |
| Парткод: | 2AR18280 |
| Цена: | 130 ₽ |
| Деталь: | ELECTRODE DRUM |
| Парткод: | 2FB08100 |
| Деталь: | SEAL WIRE |
| Парткод: | 2BL14480 |
| Деталь: | FAN 80 FRONT COOLING |
| Парткод: | 302FB25330 |
| Деталь: | FAN DP |
| Парткод: | 3H627280 |
| Деталь: | DRUM PWB ASSY |
| Парткод: | 302FB01111 |
| Деталь: | ELECTRODE A DRUM HEATER |
| Парткод: | 2FB08080 |
| Деталь: | ELECTRODE B DRUM HEATER |
| Парткод: | 2FB08090 |
| Деталь: | REAR RETAINER DRUM |
| Парткод: | 2FB08040 |
| Деталь: | FRONT RETAINER DRUM |
| Парткод: | 2FB08050 |
| Деталь: | SPRING,CHARGER |
| Парткод: | 27203060 |
| Деталь: | HOOK WIRE |
| Парткод: | 2C910070 |
| Деталь: | SLIDER PTC CLEANING |
| Парткод: | 302FB08761 |
| Деталь: | PARTS,PTC CLEANIG PAD ASSY SP |
| Парткод: | 302FB94110 |
| Деталь: | LID PTC HOUSING |
| Парткод: | 2FB08790 |
| Деталь: | TUNGSTEN WIRE(OX) SP (50M) |
| Парткод: | 74669000 |
| Деталь: | GEAR 35 MC |
| Парткод: | 2FB10200 |
| Деталь: | GEAR 40/20 MC |
| Парткод: | 2FB10210 |
| Деталь: | MOTOR CLEANING MC |
| Парткод: | 2FB27030 |
| Деталь: | GEAR WORM /48390M0062 A4 |
| Парткод: | 5MVG115DB002 |
| Деталь: | PIN CHARGER /A-49 CHARGER A4 |
| Парткод: | 5MVT263NN001 |
| Цена: | 160 ₽ |
| Деталь: | FILM RIGHT IMAGE |
| Парткод: | 302FB08670 |
| Деталь: | TERMINAL MC |
| Парткод: | 2FB10080 |
| Деталь: | WORK PLATE MC |
| Парткод: | 2FB10260 |
| Деталь: | LEVER MC CLEANING |
| Парткод: | 2FB10290 |
| Деталь: | LAMP CLEANING |
| Парткод: | 2FB27200 |
| Деталь: | SLIDER,MC CLEANING PAD |
| Парткод: | 36710111 |
| Деталь: | PAD,MC WIRE CLEANING |
| Парткод: | 2A010180 |
| Деталь: | WIRE,GRID(SUS) |
| Парткод: | 61710330 |
| Деталь: | WIRE,MAIN CHARGER |
| Парткод: | 2A068240 |
| Деталь: | COVER CLN FAN |
| Парткод: | 2FB08390 |
| Деталь: | FAN COOLING(60-15TH) |
| Парткод: | 302FB25130 |
| Деталь: | COVER A IMAGE FORM |
| Парткод: | 302FB04531 |
| Деталь: | LEVER CONT RELEASE |
| Парткод: | 2FB08370 |
| Деталь: | SPRING CONT RELEASE |
| Парткод: | 2FB08380 |
| Деталь: | COVER B IMAGE FORM |
| Парткод: | 302FB04541 |
| Деталь: | FILM LOWER IMAGE A |
| Парткод: | 302FB08660 |
| Деталь: | CONNECTOR |
| Парткод: | 7YCC02B1001+H01 |
| Деталь: | LABEL TONER SUPPLY |
| Парткод: | 2FB05050 |
| Деталь: | COVER C IMAGE FORM |
| Парткод: | 302FB04560 |
| Деталь: | RETAINER M4 |
| Парткод: | 3CY06030 |
| Деталь: | FILTER MC FAN |
| Парткод: | 302FB08630 |
| Деталь: | FRONT FILTER DLP FAN |
| Парткод: | 302FB08640 |
| Деталь: | FRONT FILTER IMAGE FAN |
| Парткод: | 302FB23570 |
| Деталь: | PARTS,DRUM ELECTRODE ASSY |
| Парткод: | 302FB93160 |
| Деталь: | PARTS, DRUM ASSY |
| Парткод: | 302FB93010 |
| Цена: | 171 000 ₽ |
| Деталь: | PARTS, PTC ASSY |
| Парткод: | 302FB93021 |
| Деталь: | PARTS, MOTOR CLEANING ASSY SP |
| Парткод: | 302FB94070 |
| Деталь: | PARTS, MC-650 |
| Парткод: | 302FB93031 |
| Деталь: | PARTS,MC CLEANING PAD ASSY SP |
| Парткод: | 302FB94050 |
| Деталь: | PARTS,GRID ASSY SP |
| Парткод: | 302FB94040 |
| Деталь: | COVER CONVEYING |
| Парткод: | 303H608061 |
| Деталь: | HANDLE C COVER |
| Парткод: | 3H608180 |
| Деталь: | MOUNT C PULLEY |
| Парткод: | 3H608100 |
| Деталь: | HOLDER C PULLEY |
| Парткод: | 3H608090 |
| Деталь: | SPRING C PULLEY |
| Парткод: | 3H608230 |
| Деталь: | STAY C COVER |
| Парткод: | 3H608080 |
| Деталь: | SHAFT C PULLEY |
| Парткод: | 3H608150 |
| Деталь: | PULLEY CONVEYING |
| Парткод: | 3H608200 |
| Деталь: | GUIDE C COVER |
| Парткод: | 3H608070 |
| Деталь: | WIRE,REGIST |
| Парткод: | 3H627090 |
| Деталь: | SWITCH REGISTRATION |
| Парткод: | 2FG27110 |
| Деталь: | SPRING PLATE REG SW |
| Парткод: | 3H608260 |
| Деталь: | SHAFT R PULLEY |
| Парткод: | 3H608110 |
| Деталь: | PULLEY REGISTRATION |
| Парткод: | 303H608290 |
| Деталь: | SPRING R PULLEY |
| Парткод: | 3H608220 |
| Деталь: | PLATA TORQUE SPRING |
| Парткод: | 3H608250 |
| Деталь: | SHAFT HANDLE |
| Парткод: | 3H608170 |
| Деталь: | HOOK HANDLE |
| Парткод: | 3H608190 |
| Деталь: | SPRING COVER TORQUE |
| Парткод: | 3H608240 |
| Деталь: | SPRING HOOK |
| Парткод: | 3HL07240 |
| Деталь: | LEFT COVER |
| Парткод: | 3H608210 |
| Деталь: | FULCRUM C COVER |
| Парткод: | 3H608160 |
| Деталь: | TRAY EJECT (1/2) |
| Парткод: | 3H604030 |
| Деталь: | SPRING CONV |
| Парткод: | 3HK08070 |
| Деталь: | PULLEY EJECT |
| Парткод: | 3HK10030 |
| Деталь: | SPONGE EJECT |
| Парткод: | 3HK10060 |
| Деталь: | SHAFT EJECT PULLEY |
| Парткод: | 3H602130 |
| Деталь: | STOPPER EJECT |
| Парткод: | 3H604060 |
| Деталь: | REAR COVER |
| Парткод: | 303H604021 |
| Деталь: | LID REAR COVER |
| Парткод: | 3H604070 |
| Деталь: | CUSHION RUBBER |
| Парткод: | 3H602250 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | FRONT COVER (1/2) |
| Парткод: | 3H604010 |
| Деталь: | REINFORCEMENT PLATE MAT |
| Парткод: | 3H602060 |
| Деталь: | MAGNET CATCH |
| Парткод: | 2FB04220 |
| Деталь: | LABEL ORIGINAL SET |
| Парткод: | 303H605030 |
| Деталь: | CUSHION MAT A |
| Парткод: | 303H602360 |
| Деталь: | CUSHION MAT B |
| Парткод: | 303H602370 |
| Деталь: | MAT ORIGINAL |
| Парткод: | 3H602210 |
| Деталь: | PLATE MAT |
| Парткод: | 303H602051 |
| Деталь: | GROUND PLATE MAT |
| Парткод: | 303H602390 |
| Деталь: | CLOTH CLEANING |
| Парткод: | 303H604090 |
| Деталь: | LABEL CURSOR ADJUSTMENT |
| Парткод: | 303H605210 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSTG101015H01 |
| Деталь: | LABEL CAUTION |
| Парткод: | 303H605040 |
| Деталь: | LABEL HINGE CAUTION |
| Парткод: | 303H605050 |
| Деталь: | LABEL OPENING ANGLE |
| Парткод: | 303H605060 |
| Деталь: | LABEL JAM REMOVEMENT A |
| Парткод: | 303H605070 |
| Деталь: | LABEL JAM REMOVEMENT B |
| Парткод: | 303H605080 |
| Деталь: | LABEL STOPPER |
| Парткод: | 303H605090 |
| Деталь: | SPRING MAT HANGING |
| Парткод: | 303H602400 |
| Деталь: | LABEL CLOTH CLEANING |
| Парткод: | 303H605220 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSTG131015H01 |
| Деталь: | LABEL MIXED LOADING INCH |
| Парткод: | 303H605140 |
| Деталь: | LABEL MIXED LOADING CENTI EUR |
| Парткод: | 303H605150 |
| Деталь: | LABEL CAUTION A |
| Парткод: | 303H605180 |
| Деталь: | LABEL CIS CLEANING |
| Парткод: | 303H605230 |
| Деталь: | COVER GASKET |
| Парткод: | 303H602430 |
| Деталь: | PARTS, MAT ASSY SP |
| Парткод: | 303H694010 |
| Деталь: | BASE DECK |
| Парткод: | 2FB07100 |
| Деталь: | FRONT FRAME B,DECK |
| Парткод: | 302BC07232 |
| Деталь: | REAR FRAME B,DECK |
| Парткод: | 302BC07241 |
| Деталь: | LIFT PLATE,DECK |
| Парткод: | 2BC07170 |
| Деталь: | PAD, LI FT |
| Парткод: | 3BC07320 |
| Деталь: | ACTUATOR REM DETECTION |
| Парткод: | 302FB07890 |
| Деталь: | SPACER,DECK LIFT |
| Парткод: | 2BC07120 |
| Деталь: | SHAFT LCF LIFT |
| Парткод: | 2FB07290 |
| Деталь: | FRONT PULLEY,LIFT DRIVE |
| Парткод: | 2BC07020 |
| Деталь: | HOLDER, WIRE |
| Парткод: | 2BC07040 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | PULLEY, LIFT WIRE |
| Парткод: | 2BC07050 |
| Деталь: | LEFT WIRE B,LIFT |
| Парткод: | 2BC07340 |
| Деталь: | HOLDER,WIRE PULLEY |
| Парткод: | 2BC07060 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | LEFT WIRE A,LIFT |
| Парткод: | 2BC07330 |
| Деталь: | MOUNT,DECK DAMPER |
| Парткод: | 302BC07101 |
| Деталь: | DAMPER,DECK LIFT PLATE |
| Парткод: | 2BC07030 |
| Деталь: | GEAR,41 |
| Парткод: | 63822220 |
| Деталь: | GEAR 20 |
| Парткод: | 2BC07110 |
| Деталь: | FRONT CURSOR DECK |
| Парткод: | 302FB07460 |
| Деталь: | REAR CURSOR DECK |
| Парткод: | 302FB07430 |
| Деталь: | STOPPER B,TRAILING EDGE HOLDER DECK |
| Парткод: | 302BC07311 |
| Деталь: | STOPPER 5 |
| Парткод: | 2BC06980 |
| Деталь: | STOPPER 5 FUSER |
| Парткод: | 302FB20900 |
| Деталь: | LABEL,UPPER LIMIT |
| Парткод: | 2BC05240 |
| Деталь: | PROTECTING PLATE,DECK DAMPER |
| Парткод: | 2BC07890 |
| Деталь: | CUSHION,CASSETTE R |
| Парткод: | 60907170 |
| Деталь: | BUSH 6 EW |
| Парткод: | 2BG22970 |
| Деталь: | HANDLE CASSETTE |
| Парткод: | 2FB04310 |
| Деталь: | SHAFT DECK RELEASE |
| Парткод: | 2FB04640 |
| Деталь: | COVER DECK B |
| Парткод: | 2FB04300 |
| Деталь: | PLATE NUMBER 2 |
| Парткод: | 2BL04370 |
| Деталь: | LEVER DECK RELEASE |
| Парткод: | 2FB04610 |
| Деталь: | WORKING PLATE DECK SHAFT |
| Парткод: | 2FB04650 |
| Деталь: | PIN DECK RELEASE |
| Парткод: | 2FB04670 |
| Деталь: | MOUNT DECK COVER |
| Парткод: | 2FB04340 |
| Деталь: | MOUNT DECK RELEASE |
| Парткод: | 2FB04660 |
| Деталь: | LABEL DECK |
| Парткод: | 302FB05280 |
| Деталь: | MOUNT BASE DECK SLIDER |
| Парткод: | 2FB07320 |
| Деталь: | MOUNT DECK HOOK |
| Парткод: | 2FB04580 |
| Деталь: | HOOK DECK RELEASE |
| Парткод: | 2FB04620 |
| Деталь: | SPRING DECK RELEASE |
| Парткод: | 302FB04680 |
| Деталь: | REAR REINFORCEMENT A DECK |
| Парткод: | 302FB07360 |
| Деталь: | REAR REINFORCEMENT B DECK |
| Парткод: | 302FB07370 |
| Деталь: | SHEET DECK REINFORCEMENT |
| Парткод: | 302FB07380 |
| Деталь: | SPRING DECK DAMPER |
| Парткод: | 302FB07410 |
| Деталь: | FILM,LIFT PLATE |
| Парткод: | 2BC07200 |
| Деталь: | MOUNT SEQUENCE |
| Парткод: | 302FB26062 |
| Деталь: | MAIN PWB ASSY (SP) (80ppm) |
| Парткод: | 302FB68152 |
| Деталь: | MAIN PWB ASSY (SP) (60ppm) |
| Парткод: | 302FC68312 |
| Деталь: | ENGINE PWB ASSY (SP) |
| Парткод: | 302FB68131 |
| Деталь: | WIRE SADDLE,RLWS-1515T V0(KITAGAWA) |
| Парткод: | M21AK050 |
| Деталь: | LID VENDOR |
| Парткод: | 302FB26290 |
| Деталь: | GUIDE CF |
| Парткод: | 2DA26520 |
| Деталь: | SPACER, KGLS-3S |
| Парткод: | M2108000 |
| Деталь: | SPACER, KGPS-3S |
| Парткод: | M2108080 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610005++H01 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610004++H01 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610003++H01 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | FILM HDD |
| Парткод: | 302FB26420 |
| Деталь: | WIRE FINISHER |
| Парткод: | 2FB27800 |
| Деталь: | CORE 15-26X13 |
| Парткод: | 2AV27440 |
| Деталь: | WIRE MAIN PWB |
| Парткод: | 2FB27940 |
| Деталь: | MOUNT, HDD |
| Парткод: | 2BC26270 |
| Деталь: | GROUND PLATE,HDD |
| Парткод: | 2BC26280 |
| Деталь: | V RING 6 |
| Парткод: | 302FB26330 |
| Деталь: | STORAGE DEVICE |
| Парткод: | 7NH3M040G001H01 |
| Деталь: | LID NETWORK |
| Парткод: | 2DA26540 |
| Деталь: | WIRE HDD |
| Парткод: | 2FB27390 |
| Деталь: | WIRE OPERATION |
| Парткод: | 2FB27330 |
| Деталь: | CLAMP, EMT-5N(TAKEUCHI) |
| Парткод: | M7005030 |
| Деталь: | WIRE SHIELD BOX FAN |
| Парткод: | 302FB28720 |
| Деталь: | STAY SEQUENCE |
| Парткод: | 302FB26260 |
| Деталь: | FAN 40-15(5V) |
| Парткод: | 302FB25260 |
| Деталь: | LID KMAS |
| Парткод: | 302FB26270 |
| Деталь: | RAIL CONTROLLER |
| Парткод: | 302FB26240 |
| Деталь: | SWITCH MAIN |
| Парткод: | 2BL27430 |
| Деталь: | MOUNT MAIN SW |
| Парткод: | 2FB26160 |
| Деталь: | LID CF GUIDE |
| Парткод: | 302FB26360 |
| Деталь: | WIRE SCANNER PWB GND |
| Парткод: | 302FB28800 |
| Деталь: | RETAINER SEQUENCE |
| Парткод: | 2FB26150 |
| Деталь: | SUPPORT PLATE SEQUENCE |
| Парткод: | 302FB26071 |
| Деталь: | MOUNT REAR COVER |
| Парткод: | 302FB02170 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210001++H01 |
| Деталь: | LID CONTROLLER |
| Парткод: | 302FB26250 |
| Деталь: | UPPER LID SEQUENCE |
| Парткод: | 302FB26091 |
| Деталь: | RIGHT LID SEQUENCE |
| Парткод: | 302FB26100 |
| Деталь: | EARTH CONTROLLER PCB |
| Парткод: | 302FB26380 |
| Деталь: | SPONGE HDD WIRE |
| Парткод: | 302FB26440 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSSTG55050H01 |
| Деталь: | COVER SCREW |
| Парткод: | 302BG04560 |
| Деталь: | COVER MAIN WIRE |
| Парткод: | 302FB26470 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSTG810150H01 |
| Деталь: | GROUND PLATE DU REAR |
| Парткод: | 302FB09810 |
| Деталь: | GROUND PLATE FEED MOTOR |
| Парткод: | 302FB09500 |
| Деталь: | EARTH S-BOX C |
| Парткод: | 302FB26410 |
| Деталь: | SHIELD SCANNER WIRE |
| Парткод: | 302FB26480 |
| Деталь: | COVER INTERFACE WIRE |
| Парткод: | 302FB26490 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSTG101100H01 |
| Деталь: | SHEET GM05 |
| Парткод: | 302FB27270 |
| Деталь: | FILM S-BOX C |
| Парткод: | 302FB26540 |
| Деталь: | MOUNT S-BOX C |
| Парткод: | 302FB26530 |
| Деталь: | COVER OPERATION E |
| Парткод: | 302FB24011 |
| Деталь: | SHEET TABLET |
| Парткод: | 302FB24850 |
| Деталь: | KEY FUNCTION J |
| Парткод: | 2FB24150 |
| Деталь: | LENS LED |
| Парткод: | 302FB24160 |
| Деталь: | LEFT KEY COPIER |
| Парткод: | 302FB24210 |
| Деталь: | LEFT KEY PRINTER |
| Парткод: | 302FB24220 |
| Деталь: | LEFT KEY SCANNER |
| Парткод: | 302FB24230 |
| Деталь: | BARRIER TABLET |
| Парткод: | 2BJ25240 |
| Деталь: | TABLET OPERATION |
| Парткод: | 302FB25190 |
| Деталь: | SPONGE LCD A |
| Парткод: | 2BJ25270 |
| Деталь: | SPONGE LCD B |
| Парткод: | 2BJ25280 |
| Деталь: | LCD PWB |
| Парткод: | 2FB28190 |
| Деталь: | WIRE LCD |
| Парткод: | 302FB28750 |
| Деталь: | SHEET LCD |
| Парткод: | 302FB24860 |
| Деталь: | GROUND PLATE LCD A |
| Парткод: | 2BJ04220 |
| Деталь: | GROUND PLATE LCD B |
| Парткод: | 2BJ04230 |
| Деталь: | RETAINER LCD |
| Парткод: | 302FB24250 |
| Деталь: | KEY VOLUME |
| Парткод: | 302FB24470 |
| Деталь: | LEFT DUST SHIELD |
| Парткод: | 2BJ25210 |
| Деталь: | OPERATION UNIT PCB ASSY A |
| Парткод: | 302FB01220 |
| Деталь: | KEY OPERATION 10 |
| Парткод: | 2BJ25020 |
| Деталь: | KEY PRINT |
| Парткод: | 302FB24200 |
| Деталь: | KEY STOP |
| Парткод: | 2BJ25040 |
| Деталь: | KEY RESET |
| Парткод: | 2BJ25050 |
| Деталь: | KEY SAVER |
| Парткод: | 2BJ25060 |
| Деталь: | KEY INTERRUPT |
| Парткод: | 2BJ25070 |
| Деталь: | KEY CONTROL |
| Парткод: | 2BJ25080 |
| Деталь: | KEY INIT |
| Парткод: | 2BJ25090 |
| Деталь: | KEY POWER SUPPLY |
| Парткод: | 2FB24060 |
| Деталь: | SHEET OPE PCB |
| Парткод: | 302FB24450 |
| Деталь: | OPE PCB ASSY B(BA) |
| Парткод: | 302FG01111 |
| Деталь: | PLATE EARTH OPE SHIELD |
| Парткод: | 302FB24460 |
| Деталь: | SHIELD BASE OPE |
| Парткод: | 302FB24240 |
| Деталь: | SPACER,KGPS-10RF(KITAGAWA) |
| Парткод: | M2108870 |
| Деталь: | RIGHT DUST SHIELD |
| Парткод: | 2BJ25230 |
| Деталь: | COVER BASE OPERATION |
| Парткод: | 302FB24170 |
| Деталь: | SHAFT OPERATION |
| Парткод: | 302FB24180 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | REAR SHEILD OPE |
| Парткод: | 302FB04780 |
| Деталь: | BAND,RSG-130-V0(KITAGAWA) |
| Парткод: | M21AH010 |
| Деталь: | WIRE OPERATION JUNCTION |
| Парткод: | 302FB27970 |
| Деталь: | GROUND PLATE LCD C |
| Парткод: | 2BJ04240 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | CORE,7-15X18 |
| Парткод: | 65027470 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | SHEET OPERATION REAR |
| Парткод: | 302FB24880 |
| Деталь: | LABEL MAIN POWER E |
| Парткод: | 302FB24290 |
| Деталь: | LABEL OPE SET E |
| Парткод: | 302FB68040 |
| Деталь: | LABEL OPE SET J |
| Парткод: | 302FB68050 |
| Деталь: | LABEL OPE SET ITA |
| Парткод: | 302FB24410 |
| Деталь: | LABEL OPE SET DEU |
| Парткод: | 302FB24420 |
| Деталь: | LABEL OPE SET ESP |
| Парткод: | 302FB24430 |
| Деталь: | LABEL OPE SET FRA |
| Парткод: | 302FB24440 |
| Деталь: | LABEL OPE SET CHN |
| Парткод: | 302FB68381 |
| Деталь: | FILM OPERATION SIDE R |
| Парткод: | 302FB24990 |
| Деталь: | FILM OPERATION SIDE L |
| Парткод: | 302FB24980 |
| Деталь: | PIN SCANNER RETAINING |
| Парткод: | 2FB12290 |
| Деталь: | PIN FEED SHIFT |
| Парткод: | 2FB21610 |
| Деталь: | LEVER OPE MOVE |
| Парткод: | 302FB04440 |
| Деталь: | RIGHT RLATE OPE |
| Парткод: | 302FB04750 |
| Деталь: | LABEL OPE LEVER |
| Парткод: | 302FB05240 |
| Деталь: | PLATE FULCRUM OPE |
| Парткод: | 302FB24800 |
| Деталь: | PLATE FULCRUM OPE MOVE |
| Парткод: | 302FB24810 |
| Деталь: | PLATE FULCRUM OPE LEVER |
| Парткод: | 302FB24820 |
| Деталь: | BUSH 10 D8 |
| Парткод: | 302FB24830 |
| Деталь: | SHAFT OPE MOVE A |
| Парткод: | 302FB24840 |
| Деталь: | MOUNT BASE OPERATION |
| Парткод: | 2FB04360 |
| Деталь: | SPONGE LSU DUCT |
| Парткод: | 302FB23440 |
| Деталь: | COVER BASE OPERATION |
| Парткод: | 2FB04350 |
| Деталь: | SHAFT OPE MOVE |
| Парткод: | 302FB04500 |
| Деталь: | PARTS,OPERATION UNIT |
| Парткод: | 302FB93183 |
| Деталь: | TABLE C,BYPASS |
| Парткод: | 302BC06052 |
| Деталь: | SWITCH BYPASS SIZE |
| Парткод: | 302FB25140 |
| Деталь: | LEFT WIRE B,LIFT |
| Парткод: | 2BC07340 |
| Деталь: | WIRE BYPASS TRAY |
| Парткод: | 2FB27400 |
| Деталь: | SEAL BYPASS TABLE |
| Парткод: | 302FB17730 |
| Деталь: | TABLE D,BYPASS |
| Парткод: | 302BC06061 |
| Деталь: | TABLE A,BYPASS |
| Парткод: | 302BC06034 |
| Деталь: | STOPPER BYPASS TABLE |
| Парткод: | 2FB07330 |
| Деталь: | SPRING BYPASS TEBLE |
| Парткод: | 302FB17700 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | ORIGINAL SIZE SWITCH |
| Парткод: | 76727010 |
| Деталь: | SPONGE BYPASS TABLE |
| Парткод: | 302FB17720 |
| Деталь: | RACK,CURSOR |
| Парткод: | 2BC06750 |
| Деталь: | TERMINAL,PAPER SIZE DETECTION |
| Парткод: | 2BC07860 |
| Деталь: | FRONT CURSOR MP |
| Парткод: | 302FB17770 |
| Деталь: | REAR CURSOR MP |
| Парткод: | 302FB17780 |
| Деталь: | PAD,BYPASS CURSOR |
| Парткод: | 33906220 |
| Деталь: | LABEL ORIGINAL MAX |
| Парткод: | 303H605010 |
| Деталь: | TABLE B,BYPASS |
| Парткод: | 302BC06046 |
| Деталь: | GEAR 18 IDLE DEVELOPING |
| Парткод: | 302FB17710 |
| Деталь: | SIZE DETECTION ASSY |
| Парткод: | 2FG01020 |
| Деталь: | COVER,CURSOR |
| Парткод: | 33906900 |
| Деталь: | SIZE INDICATOR BYPASS(M) |
| Парткод: | 302FB17740 |
| Деталь: | SIZE INDICATOR BYPASS(I) |
| Парткод: | 302FB17750 |
| Деталь: | PAD, LI FT |
| Парткод: | 3BC07320 |
| Деталь: | LABEL MP CAUTION PICTURE |
| Парткод: | 302FB05220 |
| Деталь: | LABEL MP CAUTION E |
| Парткод: | 302FB05360 |
| Деталь: | PIN BYPASS TABLE |
| Парткод: | 302FB17800 |
| Деталь: | PAD MP L |
| Парткод: | 302FZ08500 |
| Деталь: | GEAR Z30S-Z15S |
| Парткод: | 2C914160 |
| Деталь: | GEAR MIXER Z22S |
| Парткод: | 2FB14080 |
| Деталь: | GEAR MIXER IDLE Z35S/Z20S |
| Парткод: | 2FB14100 |
| Деталь: | CAM DLP LOWER ROLLER |
| Парткод: | 302FB14400 |
| Деталь: | GEAR DLP INPUT 32H |
| Парткод: | 302FB14750 |
| Деталь: | GEAR DLP INPUT 15S |
| Парткод: | 302FB14760 |
| Деталь: | GEAR DLP IDLE Z22H/Z15H |
| Парткод: | 302FB14580 |
| Деталь: | GEAR MAGNET ROLLER Z25H |
| Парткод: | 302FB14590 |
| Деталь: | BEARING,DEVELOPING |
| Парткод: | 35914820 |
| Деталь: | LOWER SHAFT DLP |
| Парткод: | 302FB14330 |
| Деталь: | SEAL DLP LOWER ROLLER |
| Парткод: | 302FB14430 |
| Деталь: | FRONT BUSH DLP ROLLER |
| Парткод: | 302FB14370 |
| Деталь: | REAR BUSH DLP ROLLER |
| Парткод: | 302FB14380 |
| Деталь: | SPRING COLLECT ROLLER |
| Парткод: | 302FB14390 |
| Деталь: | LEVER DLP LOWER ROLLER |
| Парткод: | 302FB14340 |
| Деталь: | UPPER FILM A DLP |
| Парткод: | 2FB14250 |
| Деталь: | UPPER FILM B DLP |
| Парткод: | 2FB14260 |
| Деталь: | FELT MIXER |
| Парткод: | 302FB14710 |
| Деталь: | PARTS,DLP LOWER ROLLER ASSY SP |
| Парткод: | 302FB94080 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | PARTS, DV-650 |
| Парткод: | 302FB93052 |
| Деталь: | FRONT MOUNT CIS |
| Парткод: | 3H610130 |
| Деталь: | GUIDE CIS ROLLER |
| Парткод: | 3H610170 |
| Деталь: | SENSOR A3 CIS |
| Парткод: | 3H627210 |
| Деталь: | FFC CIS |
| Парткод: | 3H627190 |
| Деталь: | REAR MOUNT CIS |
| Парткод: | 3H610140 |
| Деталь: | WIRE SADDLE,RMS-1V0(TAKEUCHI) |
| Парткод: | M70AK010 |
| Деталь: | EDGING,EDS-17L(KITAGAWA) |
| Парткод: | M2104250 |
| Деталь: | SPACER, KGLS-3S |
| Парткод: | M2108000 |
| Деталь: | SPACER, KGPS-3S |
| Парткод: | M2108080 |
| Деталь: | MAIN PCB ASSY |
| Парткод: | 303H601012 |
| Деталь: | JUNCTION WIRING, CONVEYING |
| Парткод: | 3H627070 |
| Деталь: | WIRE,INTERLOCK |
| Парткод: | 3H627150 |
| Деталь: | EDGING, EDS-0607U(KITAGAWA) |
| Парткод: | M2104260 |
| Деталь: | MOUNT CIS INV PCB |
| Парткод: | 3H602270 |
| Деталь: | MNT LIFT SW |
| Парткод: | 3H606150 |
| Деталь: | SENSOR 248NL1 |
| Парткод: | 2C927210 |
| Деталь: | INVERTER PCB |
| Парткод: | 3H628040 |
| Деталь: | WIRE,INVERTER |
| Парткод: | 3H627260 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | BAND,RSG-130-V0(KITAGAWA) |
| Парткод: | M21AH010 |
| Деталь: | WIRE,CIS LAMP REMORT |
| Парткод: | 3H627250 |
| Деталь: | SHD PCB ASSY |
| Парткод: | 3H601020 |
| Деталь: | WIRE,CIS DATA |
| Парткод: | 3H627200 |
| Деталь: | WIRE,CIS JUNCTION PCB IF |
| Парткод: | 3H627180 |
| Деталь: | ACCESS.BUSHING |
| Парткод: | 7YZM110001++H01 |
| Деталь: | LED PCB ASSY |
| Парткод: | 3H601030 |
| Деталь: | ACCESS.BUSHING |
| Парткод: | 7YZM110002++H01 |
| Деталь: | CORE,9-20X32 |
| Парткод: | 65027480 |
| Деталь: | JUNCTION WIRING,ORG. SET |
| Парткод: | 3H627040 |
| Деталь: | WIRE SADDLE,RLWS-1T V0(KITAGAWA) |
| Парткод: | M21AK010 |
| Деталь: | WIRE,SCANNER IF |
| Парткод: | 3H627170 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610001++H01 |
| Деталь: | ACCESS SADDLE |
| Парткод: | 7YZM610002++H01 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210001++H01 |
| Деталь: | ACCESS.EDGING |
| Парткод: | 7YZM210002++H01 |
| Деталь: | UPPER GUIDE DU CONVEYING |
| Парткод: | 302FB19041 |
| Деталь: | HOLDER SW DU |
| Парткод: | 2FB19770 |
| Деталь: | SWITCH FEED A |
| Парткод: | 302FB27240 |
| Деталь: | WIRE DUPLEX UNIT D |
| Парткод: | 2FB27770 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | LOWER GUIDE DU CONV ASSY |
| Парткод: | 2FB00080 |
| Деталь: | WIRE DUPLEX UNIT B |
| Парткод: | 2FB27750 |
| Деталь: | FRONT FRAME DU |
| Парткод: | 302FB19011 |
| Деталь: | REAR FRAME DU ASSY |
| Парткод: | 302FB00071 |
| Деталь: | LEFT MOUNT GUIDE RAIL |
| Парткод: | 2FB19470 |
| Деталь: | PULLEY,LIFT WIRE |
| Парткод: | 2BC07050 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | RIGHT MOUNT GUIDE RAIL |
| Парткод: | 2FB19460 |
| Деталь: | SHAFT C DU CONVEYING |
| Парткод: | 2FB19550 |
| Деталь: | PULLEY FEED SHIFT |
| Парткод: | 2BL21330 |
| Деталь: | SPRING CONVEYING |
| Парткод: | 2FB19860 |
| Деталь: | SPRING C LOWER GUIDE |
| Парткод: | 2FB19870 |
| Деталь: | WIRE JAM LIFT |
| Парткод: | 2FB19980 |
| Деталь: | LOWER GUIDE DU 1/2 |
| Парткод: | 2FB19030 |
| Деталь: | SPRING RETAINING |
| Парткод: | 2FB19580 |
| Деталь: | SPRING RETAINING 2 |
| Парткод: | 2FB19570 |
| Деталь: | SHAFT B DU CONVEYING |
| Парткод: | 2FB19540 |
| Деталь: | SHAFT A DU CONVEYING |
| Парткод: | 2FB19510 |
| Деталь: | HOLDER MAGNET |
| Парткод: | 2FB19950 |
| Деталь: | MAGNET LOWER GUIDE |
| Парткод: | 302FB19961 |
| Деталь: | LEVER GUIDE DU |
| Парткод: | 2FB19480 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | SPRING A LOWER GUIDE |
| Парткод: | 2FB19810 |
| Деталь: | STOPPER BYPASS TABLE |
| Парткод: | 2FB07330 |
| Деталь: | MOUNT PULLEY LIFT |
| Парткод: | 302FB19500 |
| Деталь: | PULLEY,CLEANING UNIT |
| Парткод: | 27307190 |
| Деталь: | COVER DU |
| Парткод: | 2FB04550 |
| Деталь: | SPONGE DU REAR FRAME |
| Парткод: | 302FB19310 |
| Деталь: | MOUNT GROUND LOWER GUIDE |
| Парткод: | 302FB09710 |
| Деталь: | GROUND PLATE LOWER GUIDE A |
| Парткод: | 302FB09730 |
| Деталь: | GROUND PLATE LOWER GUIDE B |
| Парткод: | 302FB09740 |
| Деталь: | GROUND PLATE LOWER GUIDE C |
| Парткод: | 302FB09750 |
| Деталь: | LOWER COVER DU |
| Парткод: | 302FB09780 |
| Деталь: | LABEL JAM B |
| Парткод: | 302FB05160 |
| Деталь: | LOWER RIGHT GUIDE FEED SHIFT |
| Парткод: | 302FB21170 |
| Деталь: | REAR FRAME FEED SHIFT |
| Парткод: | 302FB21221 |
| Деталь: | LEFT GUIDE,FEED SHIFT MIDDLE |
| Парткод: | 2BC21320 |
| Деталь: | FRONT FRAME FEED SHIFT |
| Парткод: | 302FB21211 |
| Деталь: | LOWER LEFT GUIDE |
| Парткод: | 302FB21180 |
| Деталь: | EDGING,EDS-0607L(KITAGAWA) |
| Парткод: | M2104390 |
| Деталь: | LEFT ROLLER FEED SHIFT |
| Парткод: | 302FB21240 |
| Деталь: | BEARING, 686ZZNR |
| Парткод: | 74808080 |
| Деталь: | RIGHT ROLLER FEED SHIFT |
| Парткод: | 302FB21380 |
| Деталь: | LOWER RIGHT ROLLER FEED SHIFT |
| Парткод: | 302FB21351 |
| Деталь: | BEARING MF128ZZ |
| Парткод: | 302FB11160 |
| Деталь: | RIGHT ROLLER TURN OVER FEED |
| Парткод: | 302FB21361 |
| Деталь: | UPPER LEFT ROLLER FEED EJECT |
| Парткод: | 302FB21370 |
| Деталь: | BUSHING 6,LOWER REGISTRATION ROLLER |
| Парткод: | 72107160 |
| Деталь: | PRESSING SPRING B,SB |
| Парткод: | 29717220 |
| Деталь: | PULLEY 22,FEED SHIFT |
| Парткод: | 2AC21650 |
| Деталь: | GEAR FEED SHIFT |
| Парткод: | 302FB21310 |
| Деталь: | PULLEY, DRIVE |
| Парткод: | 3A722090 |
| Деталь: | PULLEY 30 |
| Парткод: | 2FB21130 |
| Деталь: | PULLEY 20,SWITCH BACK |
| Парткод: | 2BC21420 |
| Деталь: | PULLEY 16,ADF |
| Парткод: | 35911520 |
| Деталь: | BELT FEED SHIFT |
| Парткод: | 302FB21080 |
| Деталь: | TENSION PLATE FEED SHIFT |
| Парткод: | 302FB21400 |
| Деталь: | PIN FEED SHIFT |
| Парткод: | 2FB21610 |
| Деталь: | SPRING, BLADE |
| Парткод: | 72418140 |
| Деталь: | SOLENOID STOPPER |
| Парткод: | 302FB25020 |
| Деталь: | SPRING,REVERSE SOLENOID |
| Парткод: | 73226040 |
| Деталь: | MOUNT,FEED SHIFT SOLENOID |
| Парткод: | 2BC21450 |
| Деталь: | LEVER B,FEED SHIFT SOLENOID |
| Парткод: | 3068720121 |
| Деталь: | LEVER A FEED SOLENOID |
| Парткод: | 2FB21630 |
| Деталь: | STOPPER 3 /2BT1107 A4 |
| Парткод: | 5MVX111DN007 |
| Деталь: | HOLDER SW FEED SHIFT |
| Парткод: | 302FB21270 |
| Деталь: | SWITCH FEED |
| Парткод: | 2FB27050 |
| Деталь: | WIRE FEED SHIFT UNIT |
| Парткод: | 2FB27610 |
| Деталь: | BAND,RSG-100(KITAGAWA) |
| Парткод: | M2107250 |
| Деталь: | GUIDE FEED SHIFT |
| Парткод: | 2FB21070 |
| Деталь: | RIGHT GUIDE,TURN OVER |
| Парткод: | 2BC21340 |
| Деталь: | MAGNET LOWER GUIDE |
| Парткод: | 302FB19961 |
| Деталь: | LABEL JAM A4 |
| Парткод: | 302FB05120 |
| Деталь: | SUPPORT PLATE COVER |
| Парткод: | 302FB21250 |
| Деталь: | STOPPER 6 |
| Парткод: | 2BC06910 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | LOWER GUIDE FEED SHIFT |
| Парткод: | 302FB21290 |
| Деталь: | PIN FUSER EJECT |
| Парткод: | 2FB21600 |
| Деталь: | GEAR WORM THRUST |
| Парткод: | 302FB21300 |
| Деталь: | JOINT,FIXING DRIVE |
| Парткод: | 33920320 |
| Деталь: | DIAL,FIXING DRIVE |
| Парткод: | 33920310 |
| Деталь: | SPRING FUSER HANDLE |
| Парткод: | 302FB21330 |
| Деталь: | LOWER ROLLER FUSER EJECT |
| Парткод: | 302FB21261 |
| Деталь: | GEAR 32 |
| Парткод: | 302FB21320 |
| Деталь: | BUSHING 8 |
| Парткод: | 2BC06510 |
| Деталь: | STOPPER 7,CARTRIDGE |
| Парткод: | 33973300 |
| Деталь: | FULCRUM PIN,FEED SHIFT |
| Парткод: | 2BC21430 |
| Деталь: | RIGHT COVER CONVEYING |
| Парткод: | 2FB04510 |
| Деталь: | HANDLE FEED |
| Парткод: | 2FB17140 |
| Деталь: | LABEL JAM A3 A |
| Парткод: | 302FB05350 |
| Деталь: | SPONGE FEED SHIFT |
| Парткод: | 302FB21190 |
| Деталь: | BAND,KI-100(KITAGAWA) |
| Парткод: | M2107240 |
| Деталь: | LABEL JAM A3 B |
| Парткод: | 302FB05340 |
| Деталь: | SPONGE B |
| Парткод: | 302FB21440 |
| Деталь: | PARTS,EMBLEM B ASSY SP (60ppm) |
| Парткод: | 302FC94050 |
| Деталь: | COVER FRONT 1/4 |
| Парткод: | 2FB04010 |
| Деталь: | COVER FRONT SUB |
| Парткод: | 2FB04020 |
| Деталь: | MOUNT FRONT COVER |
| Парткод: | 2FB04210 |
| Деталь: | MOUNT PLATE F COVER |
| Парткод: | 2FB04390 |
| Деталь: | HOLDER SWITCH |
| Парткод: | 2BL04330 |
| Деталь: | MAGNET CATCH |
| Парткод: | 2FB04220 |
| Деталь: | COVER EMBLEM |
| Парткод: | 2FB04030 |
| Деталь: | PARTS,EMBLEM ASSY SP (80ppm) |
| Парткод: | 302FB94010 |
| Деталь: | PARTS,EMBLEM B ASSY SP (80ppm) |
| Парткод: | 302FB94120 |
| Деталь: | PARTS,EMBLEM ASSY SP (60ppm) |
| Парткод: | 302FC94010 |
| Деталь: | COVER INNER FRONT |
| Парткод: | 302FB04801 |
| Деталь: | SPONGE INNER FRONT C |
| Парткод: | 302FB04880 |
| Деталь: | SPONGE INNER FRONT B |
| Парткод: | 302FB04860 |
| Деталь: | SPONGE INNER FRONT A |
| Парткод: | 302FB04850 |
| Деталь: | SPONGE INNER FRONT D |
| Парткод: | 302FB04910 |
| Деталь: | SHEET OPE FRONT |
| Парткод: | 302FB04870 |
| Деталь: | DUCT INNER FRONT |
| Парткод: | 302FB04920 |
| Деталь: | SPONGE FRONT DUCT A |
| Парткод: | 302FB23360 |
| Деталь: | SPONGE FRONT DUCT B |
| Парткод: | 302FB23370 |
| Деталь: | SPONGE FRONT DUCT C |
| Парткод: | 302FB23380 |
| Деталь: | SPONGE FRONT DUCT D |
| Парткод: | 302FB23390 |
| Деталь: | FILTER FRONT COVER D |
| Парткод: | 302FB23470 |
| Деталь: | FILTER FRONT COVER E |
| Парткод: | 302FB23480 |
| Деталь: | FILTER FRONT COVER F |
| Парткод: | 302FB23490 |
| Деталь: | BAND B |
| Парткод: | 2BG06480 |
| Деталь: | COVER LOWER FRONT |
| Парткод: | 2FB04050 |
| Деталь: | COVER LOWER FRONT R |
| Парткод: | 2FB04060 |
| Деталь: | SUPPORT PLATE F COVER |
| Парткод: | 302FB04231 |
| Деталь: | PIN FULCRUM F COVER |
| Парткод: | 2FB04400 |
| Деталь: | COVER LOWER RIGHT M |
| Парткод: | 2FB04100 |
| Деталь: | RETAINER M4 |
| Парткод: | 3CY06030 |
| Деталь: | COVER LOWER RIGHT F |
| Парткод: | 302FB04091 |
| Деталь: | COVER HANDLE R |
| Парткод: | 2FB04190 |
| Деталь: | COVER LOWER LEFT |
| Парткод: | 302FB04072 |
| Деталь: | COVER HANDLE L |
| Парткод: | 2FB04180 |
| Деталь: | COVER MIDDLE LEFT 1/3 |
| Парткод: | 2FB04080 |
| Деталь: | COVER INNER LEFT |
| Парткод: | 2FB04260 |
| Деталь: | PLATE MAGNET |
| Парткод: | 2FB04270 |
| Деталь: | COVER OPE SIDE RIGHT |
| Парткод: | 302FB04770 |
| Деталь: | COVER OPE SIDE LEFT |
| Парткод: | 302FB04760 |
| Деталь: | CLIP DISH |
| Парткод: | 302FB04420 |
| Деталь: | COVER OPERATION SIDE |
| Парткод: | 2FB04130 |
| Деталь: | COVER UPPER REAR 1/2 |
| Парткод: | 2FB04160 |
| Деталь: | FILTER DUST UR COVER A |
| Парткод: | 302FB04930 |
| Деталь: | FILTER DUST UR COVER B |
| Парткод: | 302FB04940 |
| Деталь: | COVER MIDDLE LEFT R |
| Парткод: | 302FB04241 |
| Деталь: | COVER UPPER LEFT 1/2 |
| Парткод: | 2FB04140 |
| Деталь: | LID MAIN SW |
| Парткод: | 2FB04370 |
| Деталь: | COVER ISU FAN |
| Парткод: | 302FB04830 |
| Деталь: | COVER MIDDLE RIGHT 1/3 |
| Парткод: | 2FB04120 |
| Деталь: | COVER FAN |
| Парткод: | 302FB04171 |
| Деталь: | COVER LOWER RIGHT R |
| Парткод: | 2FB04110 |
| Деталь: | LABEL OPE MOVE |
| Парткод: | 302FB05231 |
| Деталь: | SCREW LOWER RIGHT COVER |
| Парткод: | 302FB04900 |
| Деталь: | COVER UPPER RIGHT |
| Парткод: | 2FB04150 |
| Деталь: | COVER DP CABLE |
| Парткод: | 2FB04380 |
| Деталь: | FILTER DUST DP COVER A |
| Парткод: | 302FB04950 |
| Деталь: | FILTER DUST DP COVER B |
| Парткод: | 302FB04960 |
| Деталь: | COVER VERTICAL FEED MOTOR |
| Парткод: | 302FB07880 |
| Деталь: | COVER LOWER REAR |
| Парткод: | 302FB04813 |
| Деталь: | COVER UPPER REAR |
| Парткод: | 302FB04822 |
| Деталь: | PLATE FULCRUM F COVER |
| Парткод: | 302FB04890 |
| Деталь: | GUIDE REAR DLP FILTER |
| Парткод: | 302FB23550 |
| Деталь: | REAR DLP FILTER |
| Парткод: | 302FB23560 |
| Деталь: | SEAL OPERATION LEFT |
| Парткод: | 302FB24890 |
| Деталь: | SEAL OPERATION RIGHT |
| Парткод: | 302FB24900 |
| Деталь: | LABEL MAIN SW E |
| Парткод: | 302FB05300 |
| Деталь: | FILTER S-BOX FAN |
| Парткод: | 302FB26450 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSSTG51140H01 |
| Деталь: | SHIELD GASKET |
| Парткод: | 7ZGSSTG55330H01 |
| Деталь: | REAR DUCT A |
| Парткод: | 302FB23531 |
| Деталь: | REAR DUCT B |
| Парткод: | 302FB23542 |
| Деталь: | OZONE FILTER B |
| Парткод: | 302FB23580 |
| Деталь: | OZONE FILTER C |
| Парткод: | 302FB23590 |
| Деталь: | PARTS,REAR DLP FILTER B ASSY |
| Парткод: | 302FB94140 |
| Деталь: | RACK LIFT |
| Парткод: | 303H606091 |
| Деталь: | COVER CURSOR |
| Парткод: | 3H606050 |
| Деталь: | SHAFT TABLE |
| Парткод: | 3H606040 |
| Деталь: | BUSHING,TRANSFER |
| Парткод: | 2A116180 |
| Деталь: | GEAR 20 LIFT |
| Парткод: | 3H622320 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | PCB MPF SIZE ASSY |
| Парткод: | 2C901050 |
| Деталь: | WIRE SADDLE,RMS-1V0(TAKEUCHI) |
| Парткод: | M70AK010 |
| Деталь: | GUIDE LIFT WIRE |
| Парткод: | 3H606160 |
| Деталь: | WIRE,ORG W SIZE |
| Парткод: | 3H627140 |
| Деталь: | EDGING, EDS-0607U(KITAGAWA) |
| Парткод: | M2104260 |
| Деталь: | FRONT CURSOR |
| Парткод: | 3H606020 |
| Деталь: | REAR CURSOR |
| Парткод: | 3H606030 |
| Деталь: | FRICTION PLATE,BYPASS |
| Парткод: | 33906400 |
| Деталь: | TABLE LIFT |
| Парткод: | 3H606010 |
| Деталь: | RACK TABLE |
| Парткод: | 3HL06050 |
| Деталь: | TERMINAL PAPER SIZE |
| Парткод: | 3HL06110 |
| Деталь: | SENSOR,CONVEYING |
| Парткод: | 3H327410 |
| Деталь: | PLATE ORIGINAL SW |
| Парткод: | 3H606130 |
| Деталь: | PAD, LI FT |
| Парткод: | 3A707290 |
| Деталь: | LABEL ORIGINAL MAX |
| Парткод: | 303H605010 |
| Деталь: | COLLAR DEVELOPING UNIT |
| Парткод: | 75714210 |
| Деталь: | SENSOR ORIGINAL |
| Парткод: | 3H627240 |
| Деталь: | JUNCTION WIRING, TABLE |
| Парткод: | 3H627120 |
| Деталь: | COVER ORIGINAL TABLE |
| Парткод: | 303H606190 |
| Деталь: | PLATE SIZE SW |
| Парткод: | 3H606120 |
| Деталь: | SEAL WIRE |
| Парткод: | 2BL14480 |
| Деталь: | TABLE ORIGINAL |
| Парткод: | 3H606100 |
| Деталь: | JOINT TABLE |
| Парткод: | 3H606060 |
| Деталь: | LABEL SIZE DIRECTIONS |
| Парткод: | 303H605200 |
| Деталь: | PIN FUSER COVER |
| Парткод: | 2FB20860 |
| Деталь: | LEVER SUPPORT |
| Парткод: | 303H606170 |
| Деталь: | LABEL MSP A |
| Парткод: | 303H605110 |
| Деталь: | COVER JOINT |
| Парткод: | 303H606180 |
| Деталь: | Ремень подачи бумаги в автоподатчике документов |
| Парткод: | 303LL07531 |
| Цена: | 1 900 ₽ |
| Деталь: | FRONT SPONGE CLN |
| Парткод: | 2FB18150 |
| Деталь: | FRONT SPONGE BLADE BACK |
| Парткод: | 2FB18460 |
| Деталь: | REAR SPONGE CLN |
| Парткод: | 2FB18160 |
| Деталь: | REAR SPONGE BLADE BACK |
| Парткод: | 2FB18450 |
| Деталь: | FRONT SPONGE CLN SIDE |
| Парткод: | 2FB18170 |
| Деталь: | REAR SPONGE CLN SIDE |
| Парткод: | 2FB18180 |
| Деталь: | BUSHING B DISPOSAL |
| Парткод: | 2FB18560 |
| Деталь: | BRUSH CLEANING |
| Парткод: | 2FB18030 |
| Деталь: | BUSH 6 EW |
| Парткод: | 2BG22970 |
| Деталь: | GEAR 31 CLN DRIVE |
| Парткод: | 2FB18220 |
| Деталь: | GEAR 16 FUR BRUSH |
| Парткод: | 2FB18230 |
| Деталь: | GEAR 29/20 SPIRAL |
| Парткод: | 2FB18240 |
| Деталь: | BLADE CLEANING SP |
| Парткод: | 302FB68240 |
| Деталь: | FRONT SEAL CLEANING |
| Парткод: | 2FB18130 |
| Деталь: | REAR SEAL CLEANING |
| Парткод: | 2FB18140 |
| Деталь: | LOWER SEAL CLEANING |
| Парткод: | 2FB18050 |
| Деталь: | CLAW,SEPARATION |
| Парткод: | 2AR18240 |
| Деталь: | PULLEY, DRUM SEPARATION |
| Парткод: | 2A118370 |
| Цена: | 90 ₽ |
| Деталь: | SPONGE LOWER SEAL |
| Парткод: | 2FB18210 |
| Деталь: | STOPPER 5 FUSER |
| Парткод: | 302FB20900 |
| Деталь: | RING STOPPER /A-49 FEED A4 |
| Парткод: | 5MVX111DN003 |
| Деталь: | PARTS,CLEANING ASSY |
| Парткод: | 302FB93070 |
Коды ошибок
C0060
C0100
C0110
C0130
C0140
C0150
C0160
C0170
C0180
C0210
C0220
C0240
C0250
C0330
C0410
C0420
C0440
C0460
C0500
C0510
C0610
C0630
C0640
C0700
C0750
C0960
C0970
C1010
C1020
C1030
C1040
C1140
C1150
C1200
C2100
C2200
C2300
C2550
C2640
C3100
C3200
C3210
C3300
C3310
C3500
C3900
C3910
C4000
C4010
C4100
C4110
C4120
C4200
C5100
C5500
C5510
C5600
C5610
C6000
C6020
C6030
C6050
C6400
C7200
C7210
C7300
C7800
C7810
C8010
C8020
C8030
C8040
C8140
C8150
C8170
C8180
C8190
C8210
C8220
C8230
C8240
C8300
C8310
C8320
C8330
C9040
C9050
C9060
C9070
C9080
Описание
| Error code: | C0060 |
| Description: | Main PWB type mismatch error |
| Causes: | Poor contact in the connector terminals. |
| Remedy: | Check the connection of connector YC26 on the main PWB and relay board, and the continuity across the connector terminals. Repair if necessary. If the problem is not solved, run maintenance item U935 and return the relay board to the Service Administrative Division. |
| Error code: | C0100 |
| Description: | Charge corona winding problem |
| Causes: | An abnormal status is output from the flash memory. |
| Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. If not repaired, replace the main PWB. |
| Error code: | C0110 |
| Description: | Backup memory data problem (main PWB) • Data in the specified area of the backup memory does not match the specified values. |
| Causes: | Problem with the backup memory data. Defective main PWB. |
| Remedy: | Problem with the backup memory data. Run maintenance item U021 to set the contents of the backup memory data again. Defective main PWB. If the C0110 is displayed after initializing the backup memory, replace the main PWB and check for correct operation. |
| Error code: | C0130 |
| Description: | Backup memory read / write error |
| Causes: | The reading or writing into the flash memory is unavailable. |
| Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reconnect the connectors on the main PWB. At that time, fix or replace the wires if they are pinched by other parts or have any damage. When the issue is not resolved, replace the main PWB. |
| Error code: | C0140 |
| Description: | Backup memory (EEPROM) data problem • Reading data from EEPROM is abnormal. |
| Causes: | Data damage of EEPROM. |
| Remedy: | Contact the Service Administrative Division. |
| Error code: | C0150 |
| Description: | Engine EEPROM reading / writing error |
| Causes: | 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing data. 2. The data read reading in 2 points mismatches 8 times continuously. 3. The read data and the write data mismatch 8 times continuously. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the EEPROM on the engine PWB The EEPROM is not properly installed. Reattach the EEPROM on the engine PWB. 3 Checking the EEPROM on the engine PWB The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. Detaching and reattaching the EEPROM 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0160 |
| Description: | Engine PWB EEPROM data error |
| Causes: | The data read from the EEPROM is judged as abnormal. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Executing U021 The storage data in the EEPROM on the engine PWB is faulty. Execute U021. Executing U021 3 Replacing the EEPROM The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. |
| Error code: | C0170 |
| Description: | Charger count error |
| Causes: | The values in one of the billing counters, life counter or the scanner counter mismatch between the main side and the engine side. |
| Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. Detaching and reattaching the main PWB 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0180 |
| Description: | Machine serial number mismatch |
| Causes: | The machine serial Nos. in the main PWB and the EEPROM on the engine PWB mismatch when turning the power on. |
| Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. Executing U004 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C0210 |
| Description: | CPU communication problem • Synchronization cannot be taken between the main CPU and engine CPU. |
| Causes: | Defective main PWB. Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Defective main PWB. Replace the main PWB. Poor contact in the connector terminals. Check the connection of connector YC1 on the main PWB and YC1 on the engine PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0220 |
| Description: | CPU communication problem • Synchronization cannot be taken between the main CPU and scanner CPU. |
| Causes: | Defective main PWB. Poor contact in the connector terminals. Defective scanner PWB. |
| Remedy: | Defective main PWB. Replace the main PWB. Poor contact in the connector terminals. Check the connection of connector YC2 on the engine PWB and YC5 on the scanner PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective scanner PWB. Replace the scanner PWB. |
| Error code: | C0240 |
| Description: | Printer board* communication problem • The printer board does not respond 120 seconds after the power is turned on. |
| Causes: | Poor contact in the connector terminals. DIMM installed incorrectly. Defective main PWB or printer board. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC9 on the main PWB and YC5 on the printer board, and the continuity across the connector terminals. Repair or replace if necessary. DIMM installed incorrectly. Check the connection. Repair or replace if necessary. Defective main PWB or printer board. Replace the main PWB or printer board and check for correct operation. |
| Error code: | C0250 |
| Description: | Network scanner board* communication problem • The response to the alive command to the network scanner transmitted once to 30 s does not come on the contrary three consecutive times or more. • The response to the communication command transmitted to the network scanner does not return 75 s or more. |
| Causes: | Poor contact in the connector terminals. Defective main PWB or network scanner board. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC3 on the main PWB and the connector on the network scanner board, and the continuity across the connector terminals. Repair or replace if necessary. Defective main PWB or network scanner board. Replace the main PWB or network scanner board and check for correct operation. |
| Error code: | C0330 |
| Description: | Relay board communication problem |
| Causes: | Poor contact in the connector terminals. |
| Remedy: | Check the connection of connector YC26 on the main PWB and relay board, and the continuity across the connector terminals. Repair if necessary. If the problem is not solved, run maintenance item U935 and return the relay board to the Service Administrative Division. |
| Error code: | C0410 |
| Description: | Exposure lamp on too long |
| Causes: | Poor contact in the connector terminals. Defective DP main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC6 on the scanner PWB and YC1 on the DP main PWB, and the continuity across the connector terminals. Repair or replace if necessary Defective DP main PWB. Replace the DP main PWB and check for correct operation. |
| Error code: | C0420 |
| Description: | Side feeder* communication error • A communication error from side feeder is detected 10 times in succession. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective side feeder main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC15 on the engine PWB and the connector YC3 on the side feeder main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective side feeder main PWB. Replace the side feeder main PWB. |
| Error code: | C0440 |
| Description: | Document finisher communication problem • A communication error from document finisher is detected 10 times in succession. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective finisher main PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC14 on the engine PWB and YC4 on the finisher main PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective finisher main PWB. Replace the finisher main PWB. |
| Error code: | C0460 |
| Description: | Duplex unit communication problem • A communication error from duplex section is detected 10 times in succession. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective duplex PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC2 on the engine PWB and YC2 on the duplex PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective duplex PWB. Replace the duplex PWB. |
| Error code: | C0500 |
| Description: | Low fuser temperature |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC3 on the engine PWB and YC2 on the deck PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0510 |
| Description: | Low fuser temperature after warm-up |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC4 on the engine PWB and YC2 on the cassette PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. |
| Error code: | C0610 |
| Description: | Lens drive problem |
| Causes: | Defective main PWB. |
| Remedy: | Replace the main PWB and check for correct operation. |
| Error code: | C0630 |
| Description: | DMA error |
| Causes: | DMA transmission of the image data does not finish within the certain time. |
| Remedy: | 1 Checking the connection 0 0 2 Checking the connection 0 0 3 Replacing the wire The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • DPCIS - DP relay PWB • DP relay PWB - Main PWB Wiring diagram 4 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. Detaching and reattaching the DP relay PWB 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
| Error code: | C0640 |
| Description: | Hard Disk error |
| Causes: | The HDD cannot be accessed properly. |
| Remedy: | 1 (When abnormal sounds occur) Replacing the HDD The HDD is faulty. Replace the HDD when the abnormal sounds are from the HDD. Detaching and reattaching the HDD 2 Checking the connection The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the following SATA cable or the terminal of the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • HDD - Main PWB Wiring diagram 3 Initializing the HDD The HDD storage data is faulty. Execute U024 [HDD Format] > [FULL]. Executing U024 4 Replacing the HDD The HDD is faulty. Replace the HDD. Detaching and reattaching the HDD 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
| Error code: | C0700 |
| Description: | Side feeder EEPROM error • An error occurs in EEPROM (U4) data read or write for the side feeder main PWB. |
| Causes: | Defective side feeder main PWB. |
| Remedy: | Replace the side feeder main PWB. |
| Error code: | C0750 |
| Description: | Document finisher* EEPROM error • A backup memory error is received in serial communication data from the finisher. |
| Causes: | Defective optional document finisher. |
| Remedy: | Replace the document finisher with another unit and check the operation. If the operation is normal, replace or repair the document finisher. |
| Error code: | C0960 |
| Description: | Developing unit EEPROM error • An error occurs in EEPROM data read or write for the developing unit. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective developing unit. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC5 on the engine PWB and the developing unit, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective developing unit. Replace the developing unit. |
| Error code: | C0970 |
| Description: | Cleaning unit EEPROM error • An error occurs in EEPROM data read or write for the cleaning unit. |
| Causes: | Poor contact in the connector terminals. Defective engine PWB. Defective cleaning unit. |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC5 on the engine PWB and the cleaning unit, and the continuity across the connector terminals. Repair or replace if necessary. Defective engine PWB. Replace the engine PWB. Defective cleaning unit. Replace the cleaning unit. |
| Error code: | C1010 |
| Description: | Lift motor 1 error |
| Causes: | Either of the following was detected 5 times continuously. 1. Lift sensor 2 does not turn on when passing 12s after cassette 1 is installed. 2. The lock-up signal is not released for 1s after lift motor 1 turns on. |
| Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the wire The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Lift motor 1 - Feed PWB Wiring diagram 4 Checking lift motor 1 Lift motor 1 is faulty. Check the operation of lift motor 1, and replace it if necessary. Detaching and reattaching the lift motor 5 Checking the wire The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Lift sensor 1 - Feed PWB Wiring diagram 6 Checking the sensor Lift sensor 1 is not properly attached or faulty. Reattach lift sensor 1. If not repaired, replace the sensor. 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C1020 |
| Description: | Lift motor 2 error |
| Causes: | Either of the following was detected 5 times continuously. 1. Lift sensor 2 does not turn on when passing 12s after cassette 2 is installed. 2. The lock-up signal is not released for 1s after lift motor 2 turns on. |
| Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the wire The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Lift motor 2 - Feed PWB Wiring diagram 4 Checking lift motor 2 Lift motor 2 is faulty. Check the operation of lift motor 2, and replace it if necessary. Detaching and reattaching the lift motor 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Lift sensor 2 - Feed PWB Wiring diagram 6 Checking the sensor Lift sensor 2 is not properly attached or faulty. Reattach lift sensor 2. If not repaired, replace the sensor. 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C1030 |
| Description: | Lift motor 3 error • When cassette 3 is inserted, lift limit switch 3 does not turn on within 33 s of lift motor 3 turning on. This error is detected four times successively. • During copying, lift limit switch 3 does not turn on within 1 s of lift motor 3 turning on. This error is detected four times successively. |
| Causes: | Broken gears or couplings of lift motor 3. Defective lift motor 3. Poor contact of lift motor 3 connector terminals. Defective lift limit switch 3. Poor contact of lift limit switch 3 connector terminals. Defective casette PWB. |
| Remedy: | Broken gears or couplings of lift motor 3. Replace lift motor 3. Defective lift motor 3. Check for continuity across the coil. If none, replace lift motor 3. Poor contact of lift motor 3 connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective lift limit switch 3. Run maintenance item U031 and turn lift limit switch 3 on and off manually. Replace lift limit switch 3 if indication of the corresponding sensor on the touch panel is not displayed in reverse. Poor contact of lift limit switch 3 connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective casette PWB. Replace the casette PWB |
| Error code: | C1040 |
| Description: | Lift motor 4 error • When cassette 4 is inserted, lift limit switch 4 does not turn on within 33 s of lift motor 4 turning on. This error is detected four times successively. • During copying, lift limit switch 4 does not turn on within 1 s of lift motor 4 turning on. This error is detected four times successively. |
| Causes: | Broken gears or couplings of lift motor 4. Defective lift motor 4. Poor contact of lift motor 4 connector terminals. Defective lift limit switch 4. Poor contact of lift limit switch 4 connector terminals. Defective casette PWB. |
| Remedy: | Broken gears or couplings of lift motor 4. Replace lift motor 4. Defective lift motor 4. Check for continuity across the coil. If none, replace lift motor 4. Poor contact of lift motor 4 connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective lift limit switch 4. Run maintenance item U031 and turn lift limit switch 4 on and off manually. Replace lift limit switch 4 if indication of the corresponding sensor on the touch panel is not displayed in reverse. Poor contact of lift limit switch 4 connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective casette PWB. Replace the casette PWB. |
| Error code: | C1140 |
| Description: | PF lift motor error Object: Side feeder |
| Causes: | 1. The PF lift upper limit sensor does not turn on when passing 30s after cassette 5 is inserted. 2. The lock-up signal is detected for 200ms continuously during the PF lift motor operation. 3. The PF lift upper limit sensor does not turn on when passing 2s after the upper limit control when printing starts. |
| Remedy: | 1 Checking the bottom plate The bottom plate does not operate properly. Repair or replace the bottom plate when it does not move vertically. 2 Checking the drive gear The drive gear to lift up the bottom plate does not rotate properly. Check if the drive gears to lift up the bottom plate rotate smoothly or have no excessive load. And apply the grease to the frictional parts and fix the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor - PF main PWB Wiring diagram 4 Checking the PF lift motor The PF lift motor is faulty. Replace the PF lift motor. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift upper limit sensor - PF main PWB Wiring diagram 6 Checking the PF lift upper limit sensor The PF lift upper limit sensor is not properly attached or faulty. Reattach the PF lift upper limit sensor. Then, replace it if it is not fixed. 7 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. Detaching and reattaching the PF main PWB |
| Error code: | C1150 |
| Description: | Side feeder lift motor going down error (optional side feeder) • Lower limit detection switch does not turn off within 15 s of the side feeder lift motor starting (within 200 ms during paper feeding). This error is detected four times successively. |
| Causes: | Poor contact of lower limit detection switch connector terminals. Defective side feeder main PWB. Defective side feeder lift motor. |
| Remedy: | Poor contact of lower limit detection switch connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective side feeder main PWB. Replace the side feeder main PWB. Defective side feeder lift motor. Run maintenance mode U247 and measure the voltage between terminals YC5-A12 (side-feeder main circuit board) and YC6- B11. (Make sure all of LUSSW, UCSSW, LLSSW and RCSSW are off.) Despite either DC24V or DC-24V is observed but if the side-feeder lift motor does not operate, replace the side-feeder lift motor. |
| Error code: | C1200 |
| Description: | Duplex side registration motor error • The duplex side registration home position sensor does not detect the home position of the side registration guide. |
| Causes: | Defective duplex side registration home position sensor. Defective duplex side registration motor. Defective duplex PWB. |
| Remedy: | Defective duplex side registration home position sensor. Check the connection of connector YC29 on the engine PWB and the connector YC1 on the duplex PWB. Repair or replace if necessary. Defective duplex side registration motor. Replace the duplex side registration motor. Defective duplex PWB. Replace the duplex PWB. |
| Error code: | C2100 |
| Description: | Developing motor error • LOCK signal remains high for 1 s, 1 s after the developing motor has turned on. |
| Causes: | Poor contact in the developing motor connector terminals. Defective developing motor rotation control circuit. Defective drive transmission system. Defective duplex PWB. |
| Remedy: | Poor contact in the developing motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective developing motor rotation control circuit. Replace the developing motor. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective duplex PWB. Replace the duplex PWB. |
| Error code: | C2200 |
| Description: | Drive motor error • LOCK signal remains high for 1 s, 1 s after the drive motor has turned on. |
| Causes: | Poor contact in the drive motor connector terminals. Defective drive motor rotation control circuit. Defective drive transmission system. Defective deck PWB or engine PWB. |
| Remedy: | Poor contact in the drive motor connector terminals. Check the connection of connector YC2 and YC11 on the deck PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective drive motor rotation control circuit. Replace the drive motor. Defective drive transmission system. Check if the rollers and gears rotate smoothly. If not, grease the bushings and gears. Check for broken gears and replace if any. Defective deck PWB or engine PWB. Replace the deck PWB or the engine PWB. |
| Error code: | C2300 |
| Description: | Fuser motor error |
| Causes: | 1. The ready signal is at the H level for 1s continuously during the fuser motor drive. 2. The ready signal is not at the L level (stable rotation) when passing 2s after the fuser motor drive starts. |
| Remedy: | 1 Checking the fuser motor The fuser motor operation is faulty. Execute U030 [Fuser] and check the fuser motor operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Fuser motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 3 Replacing the fuser unit The fuser unit is faulty. Replace the fuser unit. Detaching and reattaching the fuser unit 4 Replacing the fuser motor The fuser motor is faulty. Replace the fuser motor. Detaching and reattaching the fuser drive unit 5 Replacing the fuser drive unit The fuser drive unit is faulty. Replace the fuser drive unit. Detaching and reattaching the fuser drive unit 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C2550 |
| Description: | Transfer motor error |
| Causes: | 1. The ready signal is not at the L level (stable rotation) when passing 2s after the transfer motor drive starts. 2. The ready signal is at the H level for 1s continuously during the transfer motor drive. |
| Remedy: | 1 Checking the transfer motor The transfer motor operation is faulty. Check if the transfer belt and the drive gears rotate smoothly or have no excessive load. Apply grease to the frictional parts and repair the parts. 2 Checking the conveying unit The drawer connector connection between the conveying unit and the main unit is faulty. Firmly close the conveying unit. If there are foreign objects or the deformation on the drawer connector of the conveying unit for connecting to the main unit, repair them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Transfer motor - Relay PWB • Relay PWB - Feed PWB • Feed PWB - Engine PWB 4 Replacing the transfer motor The transfer motor is faulty. Replace the transfer motor. 5 Replacing the transfer belt unit The transfer belt unit is faulty. Replace the transfer belt unit. Detaching and reattaching the transfer belt unit 6 Replacing the relay PWB The relay PWB is faulty. Replace the relay PWB. 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C2640 |
| Description: | PF feed motor error (Side Feeder) |
| Remedy: | 1 Checking the PF conveying motor The PF conveying motor is not properly connected. The drive parts are faulty. Execute U247 [Side Deck] > [Motor On] to check the paper feeding operation. If the PF conveying motor does not properly operate, reconnect the connector. Check if the PF feed roller and the drive gears rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. Executing U247 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF conveying motor - PF main PWB • PF main PWB - Engine PWB (Cable from the side feeder) Wiring diagram 4 Replacing the PF conveying motor The PF conveying motor is faulty. Replace the PF conveying motor. Detaching and reattaching the PF drive unit (Side feeder ) 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side feeder firmware to the latest version. Firmware Update 6 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side feeder) Detaching and reattaching the PF main PWB (Side feeder) 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3100 |
| Description: | Carriage error |
| Causes: | When turning the power on or finishing originals scan through the scanner, the alignment of the home position sensor (turning on / off the sensor) fails and the error is detected. Then, the error is detected twice continuously even the initial operation is executed. |
| Remedy: | 1 Unlocking the scanner mirror frame The scanner mirror frame is not unlocked. Unlock the scanner mirror frame (lamp unit assy). Unlocking the scanner mirror frame 2 Checking the scanner movement A load is applied to the scanner movement. Check the operation of the lamp by U073 or manually moving it. If there is an excess load, check if there are any foreign objects on the optical wire or optical wire drum and clean it. After that, apply grease on the scanner rail. Detaching and reattaching the scanner wires 3 Checking the scanner wires The scanner wires are dirty or come off. Clean and reattach the scanner wires. Detaching and reattaching the scanner wires 4 Checking the scanner motor The scanner motor is faulty. Reattach the scanner motor and reconnect the connector. If not repaired, replace it. 5 Checking the belt tension of the scanner motor A load is applied to the scanner movement since the belt tension is improper. Adjust the scanner motor belt tension properly. 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Scanner motor - Engine PWB Wiring diagram 7 Checking the home position sensor The home position sensor is not properly attached. Reattach the home position sensor. 8 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Home position sensor - Engine PWB Wiring diagram 9 Replacing the home position sensor The home position sensor is faulty. Replace the home position sensor. 10 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 11 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3200 |
| Description: | LED lamp startup error |
| Causes: | The white reference data acquired by lighting the LED lamp at the initial operation does not reach the specified value. Or, the light amount detected by the CCD PWB is not enough. (2 or more LED lamps do not light. The light does not reach the CCD PWB due to condensation.) |
| Remedy: | 1 Checking the LED lamp The LED lamp does not light. Execute U061 [CCD] and check if the LED lamp is lit. If not, replace the lamp unit. After that, execute U411 [Table(ChartA)]. Detaching and reattaching the lamp unit 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • CCD PWB - Engine PWB • LED PWB - CCD PWB Wiring diagram 3 Checking the mirror The mirror or lens is frosted due to condensation. Clean the mirrors. If the condensation at the scanner section is resolved naturally by opening the document processor or the platen cover, turn the power switch off and on. 4 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3210 |
| Description: | CIS lamp error |
| Causes: | Input data did not exceed the threshold for 5s when the CIS lamp was ON. |
| Remedy: | 1 Releasing the partial operation The partial operation is executed. Execute resetting the partial operation at U906. Executing U906 2 Checking the DPCIS The CIS lamp does not light. Execute U061 [CIS] and check if the CIS lamp is lit. If not, replace the DPCIS and execute U411. Detaching and reattaching the CIS 3 Cleaning the CIS glass and the CIS roller The CIS glass or the CIS roller is dirty. Clean the CIS glass and the CIS roller. 4 Checking the DPSHD PWB The DPSHD PWB is not properly connected. Reconnect the DPSHD PWB to the DPCIS. 5 Checking the connection The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the following SATA cable or the terminal of the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • DPSHD PWB - DP relay PWB • DP relay PWB - Main PWB • DP relay PWB - DP main PWB • DP main PWB - Engine PWB Wiring diagram 6 Firmware upgrade The firmware is not the latest version. Upgrade the DP firmware to the latest version. Firmware Update 7 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. 8 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. 9 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB 10 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. Detaching and reattaching the DP main PWB 11 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3300 |
| Description: | CCD AGC error (For the internal count) |
| Causes: | Brightness of the LED lamp is darker while one of the LED lamp does not turn on or brighter than expected when processing the AGC for the CCD lamp. |
| Remedy: | 1 Checking the LED lamp The LED lamp is faulty. Check if the LED lamp lights by executing U061 [CCD]. If it does not light, replace the lamp unit and execute U411 [Table (ChartA) ]. Detaching and reattaching the lamp unit 2 Cleaning the backside of the contact glass The white reference sheet is dirty. Clean the white reference sheet at the backside of the contact glass. Detaching and reattaching the contact glass 3 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is peeled off, deformed or the FFC is broken, replace the FFC. • LED PWB - CCD PWB • CCD PWB - Engine PWB Wiring diagram 4 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 5 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3310 |
| Description: | CIS AGC error (For the internal count) |
| Causes: | The CIS could not get the normal white reference value after the AGC retry. |
| Remedy: | 1 Releasing the partial operation The partial operation is executed. Execute resetting the partial operation at U906. Executing U906 2 Cleaning the CIS glass and the CIS roller The CIS glass or the CIS roller is dirty. Clean the CIS glass and the CIS roller. 3 Firmware upgrade The firmware is not the latest version. Upgrade the DP firmware to the latest version. Firmware Update 4 Checking the DPSHD PWB The DPSHD PWB is not properly connected. Reconnect the DPSHD PWB to the DPCIS. 5 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. 6 Replacing the DPCIS The DPCIS is faulty. Replace the DPCIS, and then execute U091 and U411. Detaching and reattaching the DPCIS 7 Checking the connection The connector is not properly connected. Or, the SATA cable is faulty. Clean the terminal of the following SATA cable connector and reconnect the connectors. If there is no continuity, replace the SATA cable. • DPSHD PWB - DP relay PWB • DP relay PWB - Main PWB Wiring diagram 8 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. 9 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
| Error code: | C3500 |
| Description: | Communication error between the scanner and the ASIC |
| Causes: | The communication error is detected during the communication between the scanner ASIC and the scanner CPU. |
| Remedy: | 1 Resetting the main power ASIC does not properly operate. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 3 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3900 |
| Description: | Scanner backup memory read / write error (Engine EEPOM) |
| Causes: | The read-back value of the engine EEPROM differs. |
| Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the EEPROM on the engine PWB The EEPROM is not properly installed. Reattach the EEPROM on the engine PWB. Detaching and reattaching the EEPROM 3 Checking the EEPROM on the engine PWB The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. Detaching and reattaching the EEPROM 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
| Error code: | C3910 |
| Description: | Backup memory read/write error (scanner PWB) • Data in the specified area of the backup memory does not match the specified values. |
| Causes: | Problem with the backup memory data. Defective scanner PWB. |
| Remedy: | Problem with the backup memory data. Run maintenance item U022 to initialize the backup memory data. Defective scanner PWB. If the C3910 is displayed after initializing the backup memory, replace the main PWB and check for correct operation. |
| Error code: | C4000 |
| Description: | Polygon motor synchronization problem • The revolution does not reach the stable speed within 20 s of the START signal. |
| Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
| Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
| Error code: | C4010 |
| Description: | Polygon motor steady-state problem • The polygon motor rotation is not stable for 5 s after the polygon motor rotation has been stabilized. |
| Causes: | Poor contact in the polygon motor connector terminals. Defective polygon motor. Defective engine PWB. |
| Remedy: | Poor contact in the polygon motor connector terminals. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective polygon motor. Replace the laser scanner unit. Defective engine PWB. Check if 24 V DC is supplied to YC17-1 on the engine PWB. If not, replace the engine PWB. |
| Error code: | C4100 |
| Description: | Exposure lamp stays on |
| Causes: | Defective laser scanner unit. Defective main PWB. Poor contact in connector terminals. |
| Remedy: | Defective laser scanner unit. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB. Repair or replace if necessary. |
| Error code: | C4110 |
| Description: | BD initialization (B) problem • When power is turned on, only laser B is output and ASIC of main PWB detects a BD error for 2000 ms. |
| Causes: | Defective laser scanner unit. Defective main PWB. Poor contact in connector terminals. |
| Remedy: | Defective laser scanner unit. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB and the continuity across the connector terminals. Repair or replace if necessary. |
| Error code: | C4120 |
| Description: | BD initialization (C) problem • When power is turned on, only laser C is output and ASIC of main PWB detects a BD error for 2000 ms. |
| Causes: | Defective laser scanner unit. Defective main PWB. Poor contact in connector terminals. |
| Remedy: | Defective laser scanner unit. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB and the continuity across the connector terminals. Repair or replace if necessary. |
| Error code: | C4200 |
| Description: | BD steady-state problem • ASIC of the main PWB detects a BD error A for 4000 ms after the polygon motor rotation has been stabilized. |
| Causes: | Defective laser diode. Defective polygon motor. Defective main PWB. Poor contact in connector terminals. |
| Remedy: | Defective laser diode. Replace the laser scanner unit. Defective polygon motor. Replace the laser scanner unit. Defective main PWB. Replace the main PWB and check for correct operation. Poor contact in connector terminals. Check the connection of connector YC8 on the main PWB and the continuity across the connector terminals. Repair or replace if necessary. |
| Error code: | C5100 |
| Description: | Main high-voltage error • While the main high-voltage output remote signal is on, an alarm signal is detected continuously for 400 ms. |
| Causes: | Defective high voltage PWB. Leak of main high-voltage. Poor contact in connector terminals. |
| Remedy: | Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Leak of main highvoltage. Check the main charger unit and replace if necessary. Poor contact in connector terminals. Check the connection of connector YC7 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. |
| Error code: | C5500 |
| Description: | Drum surface potential sensor problem 1 • The sensor output is 0.5 V or less when MC REM signal is turned on. |
| Causes: | Poor contact in the drum surface potential sensor connector terminals. Defective drum surface potential sensor. Defective high voltage PWB. Defective engine PWB. |
| Remedy: | Poor contact in the drum surface potential sensor connector terminals. Check the connection of connector YC5 on the engine PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, repair or replace the cable. Defective drum surface potential sensor. Replace the drum surface potential sensor. Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Defective engine PWB. Replace the engine PWB and check for correct operation. |
| Error code: | C5510 |
| Description: | Drum surface potential sensor problem 2 • The sensor output is 4.5 V or more when the MC REM signal is turned on. |
| Causes: | Defective drum surface potential sensor. Defective high voltage PWB. Poor contact in the drum surface potential sensor. |
| Remedy: | Defective drum surface potential sensor. Replace the drum surface potential sensor. Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Poor contact in the drum surface potential sensor. Check the connection of connector YC5 on the engine PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. |
| Error code: | C5600 |
| Description: | Drum surface potential problem 1 • The sensor output is 4.5 V or more. • Potential adjustment in 30 times could not raise the potential sensor value to the predetermined. |
| Causes: | Deteriorated main charger. Grid or main charger shield is dirty. Defective drum surface potential sensor. Defective high voltage PWB. Defective engine PWB. |
| Remedy: | Deteriorated main charger. Check the main charger wire and replace it if necessary. Grid or main charger shield is dirty. Clean the grid or main charger shield if necessary. Defective drum surface potential sensor. Replace the drum surface potential sensor. Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Defective engine PWB. Replace the engine PWB and check for correct operation. |
| Error code: | C5610 |
| Description: | Drum surface potential problem 2 • The sensor output is 0.5 V or less. • Potential adjustment in 30 times could not lower the potential sensor value to the predetermined. |
| Causes: | Defective drum surface potential sensor. Defective high voltage PWB. Defective drum. Defective engine PWB. |
| Remedy: | Defective drum surface potential sensor. Replace the drum surface potential sensor. Defective high voltage PWB. Replace the high voltage PWB and check for correct operation. Defective drum. Replace the drum. Defective engine PWB. Replace the engine PWB. |
| Error code: | C6000 |
| Description: | IH heating error 1 |
| Causes: | The fuser center thermistor temperature does not reach 100°C / 212°F when passing 60s since warm-up starts. Or, the ready display temperature is not detected when passing 420s since the fuser center thermistor temperature reaches 100°C / 212°F during warm-up. |
| Remedy: | 1 Executing U169 The IH setting mismatches the power source specification. Set the fuser destination same as the IH PWB voltage at U169. Executing U169 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature cannot be detected properly due to the broken thermostat or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the current PWB The current PWB is faulty. Replace the current PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. |
| Error code: | C6020 |
| Description: | Fuser center thermistor high temperature error |
| Causes: | The fuser center thermistor detects 240°C / 464°F or more for 1s. |
| Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the thermistor error, etc. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
| Error code: | C6030 |
| Description: | Fuser center thermistor broken |
| Causes: | The output from the fuser center thermistor is under 20°C / 68°F level during warm-up. Or, the temperature detected at the fuser center thermistor does not change for 10s after turning the fuser heater on. |
| Remedy: | 1 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 5 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
| Error code: | C6050 |
| Description: | Fuser center thermistor low temperature error |
| Causes: | The fuser center thermistor detects less than 100°C / 212°F for 1s after warm-up, or during print or standby. |
| Remedy: | 1 Changing the wall outlet The power voltage descends by 10% or more of the rated voltage when printing. Connect the power cord to a different wall outlet if the power supply voltage descends by 10% or more of the rated voltage. 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 10 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 11 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit |
| Error code: | C6400 |
| Description: | Zero-cross signal error • The engine PWB does not detect the zero-crossing signal (Z CROSS SIG) for 5 s. |
| Causes: | Poor contact in the connector terminals. Defective DC power source PWB. Defective engine PWB |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC11 on the engine PWB and YC6 on the DC power source PWB, and the continuity across the connector terminals. Repair or replace if necessary. Defective DC power source PWB. Check if the zero-crossing signal is output from YC6-3 on the DC power source PWB. If not, replace the DC power source PCB. Defective engine PWB. Replace the engine PWB if C6400 is detected while YC6-3 on the DC power source PWB outputs the zero-crossing signal. |
| Error code: | C7200 |
| Description: | Internal thermistor broken (For the internal count) |
| Causes: | The output sampling value from the belt skew detection sensor (in-machine thermistor) exceeds the reference value. (After the abnormal value is detected, the detected temperature is regarded as 20°C / 68°F.) |
| Remedy: | 1 Executing U139 The belt skew detection sensor is faulty. Execute U139 [Ext/Int] to check the external temperature and humidity display. (Go to the next step.) Executing U139 2 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed. Reinstall the primary transfer belt unit so that the connector is firmly connected. Detaching and reattaching the primary transfer belt unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 4 Primary transfer belt unit replacement The belt skew detection sensor is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C7210 |
| Description: | Internal thermistor short-circuited (For the internal count) |
| Causes: | The output sampling value from the belt skew detection sensor (in-machine thermistor) is less than the reference value. (After the abnormal value is detected, the detected temperature is regarded as 20°C / 68°F.) |
| Remedy: | 1 Executing U139 The belt skew detection sensor is faulty. Execute U139 [Ext/Int] to check the external temperature and humidity display. (Go to the next step.) Executing U139 2 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed. Reinstall the primary transfer belt unit so that the connector is firmly connected. Detaching and reattaching the primary transfer belt unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 4 Primary transfer belt unit replacement The belt skew detection sensor is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C7300 |
| Description: | Toner hopper problem • During toner replenishment after toner empty has been detected, toner empty could not be cleared in 3 times of 360 s. |
| Causes: | Defective toner level detection sensor. Poor contact in the toner level detection sensor connector terminals. |
| Remedy: | Defective toner level detection sensor. Replace the toner level detection sensor. Poor contact in the toner level detection sensor connector terminals. Check the connection of connectors YC2 and YC5 on the deck PWB and YC3 on the engine PWB. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. |
| Error code: | C7800 |
| Description: | Outer thermistor broken (For the internal count) |
| Causes: | The external temperature sensor (external thermistor) cannot be accessed. No response is received from the external thermistor 5 times continuously for 5ms or more when accessing the external thermistor. |
| Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Room temperature sensor - Front PWB?• Front PWB - Engine PWB Wiring diagram 2 Replacing the external temperature sensor The external temperature sensor is faulty. Replace the external temperature sensor. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
| Error code: | C7810 |
| Description: | Short-circuited external thermistor • The thermistor input value is 0.5 V or less. |
| Causes: | Poor contact in the connector terminals. Defective humidity sensor. Defective engine PWB |
| Remedy: | Poor contact in the connector terminals. Check the connection of connector YC13 on the engine PWB and the continuity across the connector terminals. Repair or replace if necessary. Defective humidity sensor. Replace the humidity sensor. Defective engine PWB. Replace the engine PWB. |
| Error code: | C8010 |
| Description: | Punch motor error 1 Object: 4000-sheet finisher + Punch unit |
| Causes: | 1. The punch home position sensor does not turn on when passing 200ms after driving the punch motor. 2. The pulse plate does not count the specified pulse when passing 300ms after the punch operation starts. |
| Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • Punch home position sensor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. 5 Checking the punch home position sensor The punch home position sensor is not properly attached or faulty. Execute U241 [Punch] > [Punch HP]. If the PH home position sensor does not properly operate, reattach it. If not repaired, replace the sensor. Executing U241 6 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 7 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8020 |
| Description: | Punch motor error 2 Object: 4000-sheet finisher + Punch unit |
| Causes: | The home position is not aligned within 3s when initializing the home position or standby. |
| Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. Executing U240 5 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 6 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8030 |
| Description: | Punch motor error 3 Object: 4000-sheet finisher + Punch unit |
| Causes: | The home position detection does not turn off within 50ms when initializing the home position. |
| Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. Executing U240 5 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 6 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8040 |
| Description: | Document finisher lower paper conveying belt problem • During initialization, the intermediate tray lower sliding plate is not detected in the home position within 3 s after the belt returns to the home position. JAM87 is indicated the first time this problem occurs. If the problem reoccurs after initialization when the front cover is opened and closed, the problem is in the lower paper conveying belt. • When the intermediate tray lower sliding plate is operated from the home position, the lower paper conveying belt home position sensor does not turn off within 1 s. |
| Causes: | Phase shift of the lower paper conveying belt. Malfunction of the lower paper conveying belt motor. Malfunction of the lower paper conveying belt home position sensor. Loose connection of the lower paper conveying belt home position sensor connector. Incorrect insertion of the intermediate tray. Defective finisher main PWB. |
| Remedy: | Phase shift of the lower paper conveying belt. Correct the phase of the lower paper conveying belt and check for correct operation. Malfunction of the lower paper conveying belt motor. Replace the lower paper conveying belt motor and check for correct operation. Malfunction of the lower paper conveying belt home position sensor. Replace the lower paper conveying belt home position sensor and check for correct operation. Loose connection of the lower paper conveying belt home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Incorrect insertion of the intermediate tray. Check whether the intermediate tray catches are damaged. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation. |
| Error code: | C8140 |
| Description: | Main tray error 1 Object: 4000-sheet finisher |
| Causes: | DF tray sensor 1 or 2, or , DF tray upper surface sensor 1 or 2 does not turn on when passing 30s while lifting up the main tray. |
| Remedy: | 1 Checking the main tray The main tray is not properly assembled. If the main tray does not move up and down manually, repair the part that restricts the operation. 2 Checking the drive parts The main tray drive parts are not properly attached or faulty. Reattach the main tray drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray motor - DF main PWB Wiring diagram 4 Replacing the DF tray motor The DF tray motor is faulty. Execute U240 [Motor] > [Tray]. If the DF tray motor does not properly operate, replace it. Executing U240 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray sensor 1 - DF main PWB • DF tray sensor 2 - DF main PWB • DF tray upper surface sensor 1 - DF main PWB • DF tray upper surface sensor 2 - DF main PWB Wiring diagram 6 Checking DF tray sensor 1, 2 DF tray sensor 1 or 2 is not properly attached or faulty. Reattach DF tray sensor 1 or 2 and execute U241 [Finisher] > [Tray U-Limit] or [Tray HP2]. If the sensor does not properly operate, replace it. Executing U241 7 Checking DF tray upper side sensor 1, 2 DF tray upper surface sensor 1 or 2 is not properly attached or faulty. Reattach DF tray upper surface sensor 1 or 2 and execute U241 [Finisher] > [Tray Top]. If the sensor does not properly operate, replace it. Executing U241 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8150 |
| Description: | Main tray error 2 Object: 4000-sheet finisher |
| Causes: | DF tray sensor 1 or 2, or , DF tray upper surface sensor 1 or 2 do not turn on and off when passing 5s when the main tray descends. |
| Remedy: | 1 Checking the main tray The main tray is not properly assembled. If the main tray does not move up and down manually, repair the part that restricts the operation. 2 Checking the drive parts The main tray drive parts are not properly attached or faulty. Reattach the main tray drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray motor - DF main PWB Wiring diagram 4 Replacing the DF tray motor The DF tray motor is faulty. Execute U240 [Motor] > [Tray]. If the DF tray motor does not properly operate, replace it. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray sensor 1 - DF main PWB • DF tray sensor 2 - DF main PWB • DF tray upper surface sensor 1 - DF main PWB • DF tray upper surface sensor 2 - DF main PWB Wiring diagram 6 Checking DF tray sensor 1, 2 DF tray sensor 1 or 2 is not properly attached or faulty. Reattach DF tray sensor 1 or 2 and execute U241 [Finisher] > [Tray U-Limit] or [Tray HP2]. If the sensor does not properly operate, replace it. Executing U241 7 Checking DF tray upper side sensor 1, 2 DF tray upper surface sensor 1 or 2 is not properly attached or faulty. Reattach DF tray upper surface sensor 1 or 2 and execute U241 [Finisher] > [Tray Top]. If the sensor does not properly operate, replace it. Executing U241 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8170 |
| Description: | DF side registration motor 1 error 1 Object: 4000-sheet finisher |
| Causes: | The home position cannot be detected after passing 3s when relocating to the home position. |
| Remedy: | 1 Checking the front DF side registration guide The front DF side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB Wiring diagram 4 Replacing DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. 5 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8180 |
| Description: | DF side registration motor 1 error 2 Object: 4000-sheet finisher |
| Causes: | J6810/J6811/J6812 (Front DF side registration jam) was detected 2 times continuously. |
| Remedy: | 1 Checking the front DF side registration guide The front side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive components. 3 Replacing the front DF side registration guide drive components The front DF side registration guide drive components are faulty. Replace the front DF side registration guide drive components. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB 5 Checking DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. Executing U240 6 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8190 |
| Description: | DF side registration motor 2 error 1 Object: 4000-sheet finisher |
| Causes: | The home position is not detected when passing 3s while executing the operation of returning to the home position. |
| Remedy: | 1 Checking the rear DF side registration guide The rear DF side registration guide is not assembled properly. If the rear DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the rear DF side registration guide drive components The rear DF side registration guide drive parts are not properly attached or faulty. Reattach the rear DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 2 - DF main PWB • DF side registration sensor 2 - DF main PWB 4 Replacing DF side registration motor 2 DF side registration motor 2 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 2 does not properly operate, replace it. Executing U240 5 Checking DF side registration sensor 2 DF side registration sensor 2 is not properly attached or faulty. Reattach DF side registration sensor 2 and execute U241 [Finisher] > [Width Tail HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8210 |
| Description: | DF staple motor front/rear error Object: 4000-sheet finisher |
| Causes: | The home position is not detected when passing 3s while returning to the home position at the initial operation. |
| Remedy: | 1 Checking the DF staple unit The DF staple unit is not assembled properly. If the DF staple unit is not shifted manually back and forth, repair the part that restricts the operation. 2 Checking the DF staple unit drive components The DF staple unit drive parts are not properly attached or faulty. Reattach the DF staple unit drive parts. If not repaired, replace the parts. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF staple motor - DF main PWB • DF staple sensor - DF main PWB Wiring diagram 4 Replacing the DF staple motor The DF staple motor is faulty. Execute U240 [Motor] > [Staple]. If the DF staple motor does not properly operate, replace the DF staple unit. 5 Checking the DF staple sensor The DF staple sensor is not properly attached or faulty. Reattach the DF staple sensor. Then, replace the DF staple unit if the sensor is not fixed. Detaching and reattaching the DF staple unit 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8220 |
| Description: | Document finisher* front clincher problem • During initialization, the front clincher is not detected in the home position within 500 ms after the front clincher returns to the home position. JAM90 is indicated the first time this problem occurs. If the problem occurs after initialization when the front cover is opened and closed, the problem is in the front clincher. • When the front clincher is operated from the home position, the front clincher home position sensor does not turn off within 500 ms. |
| Causes: | Loose connection of the front clincher motor connector. Malfunction of the front clincher motor. Malfunction of the front clincher home position sensor. Loose connection of the front clincher home position sensor connector. Defective finisher main PWB. |
| Remedy: | Loose connection of the front clincher motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Malfunction of the front clincher motor. Replace the front clincher motor and check for correct operation. Malfunction of the front clincher home position sensor. Replace the front clincher home position sensor and check for correct operation. Loose connection of the front clincher home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation. |
| Error code: | C8230 |
| Description: | DF staple motor error Object: 4000-sheet finisher |
| Causes: | J7000 (DF staple jam) is detected twice continuously. (Condition of detecting 2nd paper jam: The home position is not detected when passing 600ms since the motor starts up.) |
| Remedy: | 1 Checking the DF staple unit The DF staple unit is not assembled properly. If the DF staple cannot operate manually without paper jam, repair the part that restricts the DF staple. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF staple unit - DF main PWB Wiring diagram 3 Replacing the DF staple unit The DF staple unit is faulty. Replace the DF staple unit. Detaching and reattaching the DF staple unit 4 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
| Error code: | C8240 |
| Description: | Document finisher rear clincher problem • During initialization, the rear clincher is not detected in the home position within 500 ms after the rear clincher returns to the home position. JAM90 is indicated the first time this problem occurs. If the problem occurs after initialization when the front cover is opened and closed, the problem is in the rear clincher. • When the rear clincher is operated from the home position, the rear clincher home position sensor does not turn off within 500 ms. |
| Causes: | Loose connection of the rear clincher motor connector. Malfunction of the rear clincher motor. Malfunction of the rear clincher home position sensor. Loose connection of the rear clincher home position sensor connector. Defective finisher main PWB. |
| Remedy: | Loose connection of the rear clincher motor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Malfunction of the rear clincher motor. Replace the rear clincher motor and check for correct operation. Malfunction of the rear clincher home position sensor. Replace the rear clincher home position sensor and check for correct operation. Loose connection of the rear clincher home position sensor connector. Reinsert the connector. Also check for continuity within the connector cable. If none, remedy or replace the cable. Defective finisher main PWB. Replace the finisher main PWB and check for correct operation. |
| Error code: | C8300 |
| Description: | Main program error / Folding unit communication error Object: 4000-sheet finisher + Folding unit |
| Causes: | The main program of the folding unit is faulty when turning the power on. The communication error appears 10 times continuously after finishing the folding unit firmware version reading. |
| Remedy: | 1 Resetting the main power The operation program does not properly operate. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the BF firmware and the DF firmware to the latest version. Firmware Update 3 Checking the BF set switch The BF set switch is not properly attached. Reattach the BF set switch. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF main PWB - DF main PWB Wiring diagram 5 Replacing the BF set switch The BF set switch is faulty. Execute U241 [Booklet] > [Set]. If the BF set switch does not properly operate, replace it. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. Detaching and reattaching the DF main PWB |
| Error code: | C8310 |
| Description: | BF side registration motor 2 error Object: 4000-sheet finisher + Folding unit |
| Causes: | BF side registration sensor 2 does not turn on after passing 1s during the initial operation. |
| Remedy: | 1 Checking the upper BF side registration guide The upper BF side registration guide is not assembled properly. If the upper BF side registration guide is not shifted manually back and forth, repair the part that restricts the operation. 2 Checking the upper BF side registration guide drive components The upper BF side registration guide drive parts are not properly attached or faulty. Reattach the upper BF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF side registration motor 2 - BF main PWB • BF side registration sensor 2 - BF main PWB Wiring diagram 4 Replacing BF side registration motor 2 BF side registration motor 2 is faulty. Execute U240 [Booklet] > [Width Test(A3)] or [Width Test(LD)]. If BF side registration motor 2 does not properly operate, replace it. Executing U240 5 Checking BF side registration sensor 2 BF side registration sensor 2 is not properly attached or faulty. Reattach BF side registration sensor 2 and execute U241 [Booklet] > [Width Down HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
| Error code: | C8320 |
| Description: | BF adjustment motor error Object: 4000-sheet finisher + Folding unit |
| Causes: | At the initialization, turning on of the BF adjustment sensor is not detected after 2.5s passes. |
| Remedy: | 1 Checking the BF shift belt The BF shift belt is not assembled properly. If the BF shift belt is not operated manually, repair the part that restricts the operation. 2 Checking the BF shift belt drive components The BF shift belt drive parts are not properly attached or faulty. Reattach the BF shift belt drive parts. Reattach it if the belt comes off. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF adjustment motor 1, 2 - BF main PWB • BF adjustment sensor 1, 2 - BF main PWB Wiring diagram 4 Replacing BF adjustment motor 1, 2 BF adjustment motor 1 or 2 is faulty. Execute U240 [Booklet] > [Bundle Down] or [Bundle Up]. If BF adjustment motor 1 or 2 does not properly operate, replace them. Executing U240 5 Checking BF adjustment sensor 1, 2 BF adjustment sensor 1 or 2 is not properly attached or faulty. Reattach BF adjustment sensor 1 or 2 and execute U241 [Booklet] > [Width Down HP] or [Bundle Up HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
| Error code: | C8330 |
| Description: | BF blade motor error Object: 4000-sheet finisher + Folding unit |
| Causes: | The BF blade sensor does not turn on after passing 3s during the initial operation. |
| Remedy: | 1 Checking the BF blade The BF blade is not assembled properly. If the BF blade is not operated manually, repair the part that restricts the operation. 2 Checking the BF blade drive components The BF blade drive parts are not properly attached or faulty. Reattach the BF blade drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF blade motor - BF main PWB • BF blade sensor - BF main PWB Wiring diagram 4 Replacing the BF blade motor The BF blade motor is faulty. Execute U240 [Booklet] > [Blade]. If the BF blade motor does not properly operate, replace it. Executing U240 5 Checking the BF blade sensor The BF blade sensor is faulty. Reattach the BF blade sensor and reinsert the connector. Next, execute U241 [Booklet] > [Blade HP]. If it does not properly operate, replace the sensor. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
| Error code: | C9040 |
| Description: | DP lift motor ascend error |
| Causes: | The DF lift upper limit sensor does not detect ON when passing 1500 pulses 5 times or more while the DP lift motor drives to ascend. |
| Remedy: | 1 Checking the DP original feed lift plate The DP original feed lift plate is not properly attached. If the DP original feed lift plate does not move up and down manually, repair the part that restricts the operation. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DP lift motor - DP main PWB • DP lift upper limit sensor - DP main PWB Wiring diagram 3 Replacing the DP lift motor The DP lift motor is faulty. Execute U243 [Lift Motor]. If the DP lift motor does not properly operate, replace the motor. 4 Checking the DP lift upper limit sensor The DP lift upper limit sensor is not properly attached or faulty. Reattach the DP lift upper limit sensor and execute U244 [Lift U-Limit]. If the sensor does not properly operate, replace it. Executing U244 5 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
| Error code: | C9050 |
| Description: | DP lift motor descend error |
| Causes: | The DF lift lower limit sensor does not detect ON when passing 1500 pulses while the DP lift motor drives to descend. (3 times of retries) |
| Remedy: | 1 Checking the DP original feed lift plate The DP original feed lift plate is not properly attached. If the DP original feed lift plate does not move up and down manually, repair the part that restricts the operation. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DP lift motor - DP main PWB • DP lift lower limit sensor - DP main PWB Wiring diagram 3 Replacing the DP lift motor The DP lift motor is faulty. Execute U243 [Lift Motor]. If the DP lift motor does not properly operate, replace the motor. 4 Checking the DP lift lower limit sensor The DP lift lower limit sensor is not properly attached or faulty. Reattach the DP lift lower limit sensor and execute U244 [Lift L-Limit]. If the sensor does not properly operate, replace it. Executing U244 5 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
| Error code: | C9060 |
| Description: | DP EEPROM error |
| Causes: | Read data and write data to the EEPROM do not match 3 times continuously. |
| Remedy: | 1 Checking the EEPROM The EEPROM is not properly installed. Reattach the EEPROM on the DP main PWB. 2 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. Detaching and reattaching the DP main PWB 3 Replacing the EEPROM The EEPROM is faulty. Replace the EEPROM on the DP main PWB and execute U411. |
| Error code: | C9070 |
| Description: | DP - SHD communication error |
| Causes: | The communication error between the DP main PWB and the DPSHD PWB was detected during communication. |
| Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DPSHD PWB - DP main PWB Wiring diagram 2 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. 3 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
| Error code: | C9080 |
| Description: | LED failure detection (For the internal count) |
| Causes: | After 4 blocks of the LED lamps of the DPCIS are lit when turning the power on, the acquired peak value of some blocks is at the reference value or less. (The light level detected by the CIS is not enough.) |
| Remedy: | 1 Checking the LED lamp The LED lamp of the DPCIS does not light. 0 Executing U203 2 Checking the DPSHD PWB The DPSHD PWB is not properly connected. Reconnect the DPSHD PWB to the DPCIS. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DPSHD PWB - DP main PWB Wiring diagram 4 Executing U411 DP scanning is not properly adjusted. Execute U411 [DP FD (ChartB) ] and [DP FD (ChartA)]. Executing U411 5 Replacing the DPCIS The DPCIS is faulty. Replace the DPCIS, and then execute U091 and U411. Detaching and reattaching the DPCIS 6 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. |
