Kyocera TASKalfa 7052ci
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Скорость печати
A4
65
Цветность печати
цветная
Общие характеристики |
|
---|---|
Технология печати |
лазерная |
Размещение |
напольный |
Макс. формат |
A3 |
Область применения |
большой офис |
Телефон |
|
Факс |
|
Печать фотографий |
|
Цветность печати |
цветная |
Тип устройства |
МФУ |
Сканер |
|
Копир |
|
Принтер |
|
Печать без полей |
|
Пигментные чернила |
|
Время разогрева |
44 |
Прямая печать |
|
Двусторонняя печать |
|
Количество цветов |
4 |
Макс, разрешение для ч/б печати |
|
По X | 1 200 |
По Y | 1 200 |
Скорость ч/б печати |
|
A3 | 32 |
A3 | 35 |
A4 | 70 |
A4 | 65 |
Время выхода первого отпечатка |
|
Цветн, | 6,2 |
Ч/б | 5,4 |
Копир |
|
Шаг масштабирования |
0,01 |
Макс, количество копий за цикл |
9 999 |
Время выхода первой копии |
5,4 |
Значение масштаба |
|
Минимальное | 0,25 |
Максимальное | 4 |
Макс, разрешение (ч/б) |
|
По Y | 600 |
Сканер |
|
Тип сканера |
планшетный/протяжный |
Оттенки серого |
256 |
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Емкость устройства автоподачи оригиналов |
270 |
Устройство автоподачи оригиналов |
двустороннее |
Макс. формат оригинала |
A3 |
Слайд-адаптер |
|
Макс, размер сканирования |
|
По Y | 2 200 |
Разрешение сканера |
|
По Х | 600 |
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
70 000 |
Ресурс цветного картриджа/тонера |
30 000 |
Количество картриджей |
4 |
Печать на: |
|
Рулоне | |
CD/DVD | |
Фотобумаге | |
Матовой бумаге | |
Пленках | |
Этикетках | |
Глянцевой бумаге | |
Конвертах | |
Карточках | |
Плотность бумаги |
|
Максимальная | 300 |
Минимальная | 60 |
Факс |
|
Цветной |
|
Телефон |
|
Беспроводная трубка |
|
Автоответчик |
|
Стандарт DECT |
|
Спикерфон |
|
АОН |
|
Caller ID |
|
Проводная трубка |
|
Шрифты и языки управления |
|
Языки управления |
|
PostScript 3 | |
PCL 6 | |
PCL 5c | |
PostScript | |
PostScript 2 | |
Количество установленных шрифтов |
|
PCL | 93 |
PostScript | 136 |
Лотки |
|
Емкость лотка ручной подачи |
150 |
Подача бумаги |
|
Максимальная | 7 650 |
Стандартная | 4 150 |
Вывод бумаги |
|
Максимальный | 4 300 |
Финишер |
|
Степлер |
|
Сортер |
|
Брошюровщик |
|
Интерфейсы |
|
USB |
|
Ethernet (RJ-45) |
|
Веб-интерфейс |
|
Устройство для чтения карт памяти |
|
Bluetooth |
|
LPT |
|
Инфракрасный порт |
|
RS-232 |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
Версия USB |
2,0 |
Поддержка карт памяти |
|
Secure Digital | |
Память/Процессор |
|
Емкость жесткого диска |
320 |
Частота процессора |
1 200 |
Объем памяти |
4 608 |
Макс, объем памяти |
4 608 |
Дополнительная информация |
|
Работа от аккумулятора |
|
Диагональ дисплея |
9 |
Экран |
|
Поддержка ОС |
|
Linux | |
Windows | |
Mac OS | |
DOS | |
Потребляемая мощность |
|
При работе | 1 360 |
В режиме ожидания | 120 |
Уровень шума |
|
В режиме ожидания | 35,9 |
При работе | 53,6 |
Габариты |
|
Высота |
1 234 |
Ширина |
750 |
Глубина |
822 |
Вес |
182 |
Модули
Bridge Section 1
Electrical Components 1
Fuser Section
Drive Section & Electrical Components(DP)
Paper Deck Cassettes
Paper Deck Feed Section 1
ADF 1
Paper Deck Electrical Components
COOLING SECTION
Electrical Components 3
Paper Conveying Section 3
Covers 2
Image Formation & Developer Section
Paper Feed Section 2(DP)
PAPER FEED SECTION
Paper Deck Covers
Drive Section 1
CASSETTE ASSEMBLY
Bridge Section 2
Paper Deck Feed Section 3
Frames(DP)
Covers 1
Covers(DP)
Exit Section
FRAMES
Paper Conveying Section 1-1
DUPLEX
Covers 3
Paper Conveying Section 2
Paper Deck Drive Section
OPERATION PANEL SECTION
Bridge Section 3
Paper Conveying Section 1-3
PAPER CASSETTE
Paper Conveying Section(DP)
SCANNER SECTION
Table Assy(DP)
TRANSFER SECTION
DRIVE SECTION 2
Paper Feed Section 1(DP)
DP Unit
Paper Deck Feed Section 2
Laser Scanner Section
ELECTRICAL COMPONENTS 2
Inner Section
Job Separator Section
Paper Conveying Section 1-2
PANEL
Детали TRANSFER SECTION
Деталь: | ACTUATOR RELAY |
Парткод: | 302LF28060 |
Деталь: | PARTS ROLLER RELAY MIDDLE B SP |
Парткод: | 302LF94430 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | JOINT DRIVE |
Парткод: | 302LF28121 |
Деталь: | COVER RELAY |
Парткод: | 302NH28040 |
Деталь: | LABEL RELAY A4 |
Парткод: | 302K934180 |
Деталь: | GUIDE RELAY LOWER |
Парткод: | 302LF28023 |
Деталь: | SHEET RELAY LOWER |
Парткод: | 302LF28820 |
Деталь: | MAGNET UPPER REG GUIDE |
Парткод: | 2FB17200 |
Деталь: | SPRING-TORSION SWITCHBACK |
Парткод: | 302K928190 |
Деталь: | BUSH CONTACT MPT B |
Парткод: | 302FZ07310 |
Деталь: | PLATE EARTH ROLLER |
Парткод: | 302LF28161 |
Деталь: | LABEL RELAY A3 |
Парткод: | 302K934170 |
Деталь: | BEARING MF106ZZ |
Парткод: | 7BE006103R31H01 |
Деталь: | SPRING-COMPRESSION JOINT |
Парткод: | 302LF28441 |
Деталь: | CUT WASHER 4 |
Парткод: | 302FB09830 |
Деталь: | BELT S2M-Z133 |
Парткод: | 302LF28130 |
Деталь: | PULLEY P18-S2M |
Парткод: | 302LF28342 |
Деталь: | HOLDER SHAFT OUT |
Парткод: | 302FZ07540 |
Деталь: | CUT WASHER 4.2X10.0X0.5T |
Парткод: | 7BC46042A050H01 |
Деталь: | SPRING-EXTENSION EARTH |
Парткод: | 302LF28500 |
Деталь: | HANDLE FRONT |
Парткод: | 302LF28510 |
Деталь: | SHAFT HANDLE |
Парткод: | 302LF28181 |
Деталь: | JOINT RELAY |
Парткод: | 302LF28201 |
Деталь: | ARM LEVER RELAY |
Парткод: | 302LF28190 |
Деталь: | PLATE HINGE STOPPER |
Парткод: | 302LF28780 |
Деталь: | GUIDE RELAY UPPER |
Парткод: | 302LF28011 |
Деталь: | PLATE REINFORCEMENT |
Парткод: | 302LF28050 |
Деталь: | LABEL HIGH TEMP |
Парткод: | 302K934150 |
Деталь: | SHAFT FEED |
Парткод: | 302K324460 |
Деталь: | PULLEY DU LOW |
Парткод: | 302F929260 |
Деталь: | SPRING PULLEY |
Парткод: | 302F928170 |
Деталь: | CAP SPRING /B-11 ENCLOSURE A4 |
Парткод: | 2FM04150 |
Деталь: | SPRING-TORSION HOOK |
Парткод: | 302LF28580 |
Деталь: | HOOK LEVER JAM JS R |
Парткод: | 303MA16580 |
Деталь: | GUIDE PRESS ROTARY |
Парткод: | 302LF28380 |
Деталь: | PARTS ROLLER PRESS SP |
Парткод: | 302LF94280 |
Деталь: | BEARING MR126ZZ |
Парткод: | 7BE006124431H01 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | PARTS ROLLER PRESS DRIVE SP |
Парткод: | 302LF94270 |
Деталь: | GEAR Z30L DECURLER |
Парткод: | 302LF28650 |
Деталь: | CAP PRESS UNIT |
Парткод: | 302LF28370 |
Деталь: | PIN FEED DRIVE |
Парткод: | 303NJ31120 |
Деталь: | GEAR Z14S-Z35R |
Парткод: | 302LF28330 |
Деталь: | GEAR PRESS DRIVE |
Парткод: | 302LF28360 |
Деталь: | GUIDE RIGHT UPPER |
Парткод: | 302LF28071 |
Деталь: | GUIDE RIGHT LOWER |
Парткод: | 302LF28082 |
Деталь: | GEAR Z21S |
Парткод: | 302LF28280 |
Деталь: | COVER WIRE IH |
Парткод: | 302N739040 |
Деталь: | PARTS MOTOR LIFT ASSY SP |
Парткод: | 302NH94360 |
Деталь: | GUIDE WIRE ISU |
Парткод: | 302NH39320 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610003++H01 |
Деталь: | SW.PUSH |
Парткод: | 7SP01000006+H01 |
Деталь: | GUIDE WIRE INLET |
Парткод: | 302NH39380 |
Деталь: | PLATE INLET A2 |
Парткод: | 302N739020 |
Деталь: | PLATE INLET B2 |
Парткод: | 302N439070 |
Деталь: | PLATE INLET |
Парткод: | 302N739010 |
Деталь: | PARTS PWB CURRENT AVE 100 ASSY SP |
Парткод: | 302N494211 |
Деталь: | GUIDE WIRE FRONT PWB |
Парткод: | 302LF39050 |
Деталь: | HOLDER PWB |
Парткод: | 302K939230 |
Деталь: | ACCESS.SPACER |
Парткод: | 7YZM510007++H01 |
Деталь: | PLATE MAIN SW |
Парткод: | 302N439050 |
Деталь: | PARTS FAN COOLING LSU 60 SP |
Парткод: | 302LC94380 |
Деталь: | DUCT FAN IH |
Парткод: | 302K939560 |
Деталь: | ACCESS.SPACER |
Парткод: | 7YZM510022++H01 |
Деталь: | INTER LOCK SWITCH |
Парткод: | 2FB27160 |
Деталь: | SW.SEESAW |
Парткод: | 7SC020204+++H01 |
Деталь: | ACCESS.BUSHING |
Парткод: | 7YZM110001++H01 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | GUIDE WIRE IH |
Парткод: | 302NH39330 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610008++H01 |
Деталь: | COVER WIRE FUSER |
Парткод: | 302K939521 |
Деталь: | SPRING CONTACT FUSER SET |
Парткод: | 302NH39480 |
Деталь: | AC CORD ASSY US |
Парткод: | 7AAACCUS+20H003 |
Деталь: | WIRE INLET ASSY |
Парткод: | 302N246080 |
Деталь: | ACCESS.BUSHING |
Парткод: | 7YZM120001++H01 |
Деталь: | PARTS UNIT HIGH VOLTAGE FUSER SP |
Парткод: | 302ND94690 |
Деталь: | COVER PWB IH |
Парткод: | 302K939450 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210006++H01 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210010++H01 |
Деталь: | CONN.CORD ASSY INLET ASSY 1 |
Парткод: | 302NH46320 |
Деталь: | AC CORD ASSY JP |
Парткод: | 7AAACCJP+15H010 |
Деталь: | PARTS AC CORD EU SP |
Парткод: | 302RH94240 |
Деталь: | AC CORD ASSY AS |
Парткод: | 7AAACCAS+10H001 |
Деталь: | PARTS IH BOX ASSY (M/E) SP |
Парткод: | 302NH94180 |
Деталь: | PARTS IH BOX ASSY (M/J) SP |
Парткод: | 302NH94190 |
Деталь: | PARTS TERMINAL HV FUSER ASSY SP |
Парткод: | 302NH94170 |
Деталь: | PARTS FUSER CHAGER ASSY SP |
Парткод: | 302NH94480 |
Деталь: | FK-8740IH |
Парткод: | 302NH93110 |
Деталь: | FK-8745IH |
Парткод: | 302NH93120 |
Деталь: | FK-8720 |
Парткод: | 302NH93083 |
Деталь: | FK-8721 |
Парткод: | 302NH93092 |
Деталь: | FK-8722 |
Парткод: | 302NH93102 |
Деталь: | PARTS PWB DRIVER ASSY SP |
Парткод: | 303R894030 |
Деталь: | PARTS MOTOR CONVEYING SP |
Парткод: | 303M494041 |
Деталь: | PARTS MOTOR DU SP |
Парткод: | 302KY94071 |
Деталь: | GEAR EXIT Z43 Z20 |
Парткод: | 303M431440 |
Деталь: | PARTS MOTOR ROTARY GUIDE |
Парткод: | 302H794310 |
Деталь: | GEAR 20/65 IDLE |
Парткод: | 303H622331 |
Деталь: | PARTS GEAR Z42 SP |
Парткод: | 303M494120 |
Деталь: | PARTS GEAR JOINT Z20 Z65 SP |
Парткод: | 303M494130 |
Деталь: | GEAR 20 JOINT |
Парткод: | 3H622160 |
Деталь: | GEAR Z43 Z22 |
Парткод: | 303M431101 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | GEAR Z35 |
Парткод: | 303M431050 |
Деталь: | GEAR Z20 P48 |
Парткод: | 303M431060 |
Деталь: | GEAR Z30 Z23 |
Парткод: | 303M431090 |
Деталь: | GEAR Z25 Z19 |
Парткод: | 303M431400 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | GEAR Z22 ONEWAY |
Парткод: | 303M431040 |
Деталь: | GR 33 CONV |
Парткод: | 3HK22040 |
Деталь: | INTER LOCK SWITCH |
Парткод: | 2FB27160 |
Деталь: | MOUNT CONV MOTOR A |
Парткод: | 303M431300 |
Деталь: | PARTS MOTOR REGISTRATION SP |
Парткод: | 303M494182 |
Деталь: | CUT WASHER 4 |
Парткод: | 2BG22990 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | TORQUE-LIMITER 1000 |
Парткод: | 303M406160 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | SPRING,CONVEYING HOOK |
Парткод: | 2BC16470 |
Деталь: | JOINT RETARD DRIVE |
Парткод: | 302K906180 |
Деталь: | HOLDER WIRE A |
Парткод: | 303LL02180 |
Деталь: | MOUNT PF DRIVE |
Парткод: | 303M431013 |
Деталь: | PLATE PF DRIVE |
Парткод: | 303M431021 |
Деталь: | MOUNT LOOP DRIVE |
Парткод: | 303M431200 |
Деталь: | BELT 97ST1.5-6.0 |
Парткод: | 303M431120 |
Деталь: | MOUNT LIFT DRIVE |
Парткод: | 303M431141 |
Деталь: | COVER LIFT DRIVE |
Парткод: | 303M431150 |
Деталь: | PIN LIFT DRIVE A |
Парткод: | 303M431230 |
Деталь: | MOUNT CONV MOTOR B |
Парткод: | 303M431311 |
Деталь: | SHAFT PF DRIVE C |
Парткод: | 303M431360 |
Деталь: | SHAFT PF DRIVE F |
Парткод: | 303M431390 |
Деталь: | MOUNT INTERLOCK SW |
Парткод: | 303M431410 |
Деталь: | BELT 60S1.5M161 |
Парткод: | 303M431290 |
Деталь: | PIN,HOOK FULCRUM |
Парткод: | 3CZ02230 |
Деталь: | PARTS IC.EEPROM SP |
Парткод: | 303R894040 |
Деталь: | PLATE DECK SUB |
Парткод: | 303NF10100 |
Деталь: | PLATE WIRE LOCK |
Парткод: | 303NF10150 |
Деталь: | MOUNT CURSOR ADJUST |
Парткод: | 303NF10390 |
Деталь: | MOUNT CURSOR |
Парткод: | 303NF10110 |
Деталь: | PIN CURSOR LOCK |
Парткод: | 303NF10250 |
Деталь: | SHAFT DECK LIFT |
Парткод: | 303NF10130 |
Деталь: | LABEL DECK PAPER LIMIT |
Парткод: | 302NH34760 |
Деталь: | PLATE DECK SUB |
Парткод: | 303NF10530 |
Деталь: | STOPPER 5 |
Парткод: | 2BC06980 |
Деталь: | GEAR 20 |
Парткод: | 2BC07110 |
Деталь: | CURSOR END DECK |
Парткод: | 303NF10070 |
Деталь: | CURSOR DECK FRONT |
Парткод: | 303NF10080 |
Деталь: | CURSOR DECK REAR |
Парткод: | 303NF10091 |
Деталь: | GEAR DAMPER 100 |
Парткод: | 303NF10550 |
Деталь: | WIRE LIFT A |
Парткод: | 303NF10180 |
Деталь: | WIRE LIFT B |
Парткод: | 303NF10190 |
Деталь: | STOPPER PULLEY |
Парткод: | 303NF10220 |
Деталь: | CURSOR END SUB |
Парткод: | 303NF10410 |
Деталь: | BUSH 8 |
Парткод: | 28107310 |
Деталь: | FRONT PULLEY,LIFT DRIVE |
Парткод: | 2BC07020 |
Деталь: | LABEL DECK PAPER DIRECTION |
Парткод: | 302NH34770 |
Деталь: | LABEL DECK OPERATION B |
Парткод: | 302NH34780 |
Деталь: | LABEL DECK SIZE B |
Парткод: | 303NF34060 |
Деталь: | LABEL DECK SIZE D |
Парткод: | 303NF34080 |
Деталь: | LIFT LOCK |
Парткод: | 302GR09991 |
Деталь: | DECK CASSETTE |
Парткод: | 303NF10013 |
Деталь: | PLATE EARTH REAR |
Парткод: | 303NF10430 |
Деталь: | WIRE EARTH B |
Парткод: | 303NF10450 |
Деталь: | WIRE EARTH A |
Парткод: | 303NF10440 |
Деталь: | PLATE EARTH FRONT |
Парткод: | 303NF10420 |
Деталь: | HOLDER PULLEY |
Парткод: | 303NF10320 |
Деталь: | PLATE LIFT DECK |
Парткод: | 303NF10051 |
Деталь: | SPACER, DECK LIFT |
Парткод: | 2BC07120 |
Деталь: | STATIC ELIMINATOR CURSOR |
Парткод: | 303JY37220 |
Деталь: | PAD BOTTOM DECK |
Парткод: | 303NF10021 |
Деталь: | LABEL DECK OPERATION A |
Парткод: | 303NF34011 |
Деталь: | PULLEY LIFT WIRE |
Парткод: | 303NF10300 |
Деталь: | MOUNT DECK DAMPER |
Парткод: | 303NF10560 |
Деталь: | SPRING LIFT STOPPER |
Парткод: | 303NF10570 |
Деталь: | DAMPER |
Парткод: | 302G404160 |
Деталь: | COVER DECK LEFT |
Парткод: | 302NH04110 |
Деталь: | COVER DECK RIGHT |
Парткод: | 302NH04120 |
Деталь: | COVER DECK HANDLE LEFT |
Парткод: | 303RC04030 |
Деталь: | COVER DECK HANDLE RIGHT |
Парткод: | 303RC04020 |
Деталь: | COVER CASSETTE LABEL 3 |
Парткод: | 303RB09010 |
Деталь: | COVER CASSETTE LABEL 4R |
Парткод: | 303RC09010 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | HOLDER SENSOR FEED |
Парткод: | 302K906290 |
Деталь: | PLATE FRAME LOWER |
Парткод: | 302NH06080 |
Деталь: | SHAFT FEED LOW |
Парткод: | 302NH06980 |
Деталь: | PULLEY RETARD |
Парткод: | 302N406040 |
Цена: | 450 ₽ |
Деталь: | LEVER RETARD LOCK |
Парткод: | 302N406160 |
Деталь: | PLATE RETARD ADJUST |
Парткод: | 302K906420 |
Деталь: | SPONGE WIRE MPT |
Парткод: | 302H708150 |
Деталь: | HOLDER PULLEY |
Парткод: | 302K906700 |
Деталь: | PULLEY DU LOW |
Парткод: | 302F929260 |
Деталь: | SHAFT ASSIST PULLEY |
Парткод: | 302NH06990 |
Деталь: | HOLDER RETARD |
Парткод: | 302NH06070 |
Деталь: | HOLDER PRIM FEED PULLEY |
Парткод: | 302K906280 |
Деталь: | LOWER BUSHING,PAPER FEED |
Парткод: | 34806040 |
Деталь: | TORQUE-LIMITER 390 |
Парткод: | 302K906750 |
Деталь: | PLATE RETARD HOLDER |
Парткод: | 302NH06090 |
Деталь: | FULCRUM-PIN RETARD |
Парткод: | 302N406150 |
Деталь: | LEVER RETARD RELEASE |
Парткод: | 302N406130 |
Деталь: | SPRING RETARD |
Парткод: | 302NH06100 |
Деталь: | SHEET PRIMARY FEED HI |
Парткод: | 302K906721 |
Деталь: | GUIDE FRONT LOWER |
Парткод: | 302N406060 |
Деталь: | SPRING RETARD LOCK |
Парткод: | 302N406140 |
Деталь: | PLATE PRIMARY FEED DRIVE |
Парткод: | 302K906111 |
Деталь: | MOUNT PRIMARY FEED R |
Парткод: | 302K906270 |
Деталь: | SHAFT PICKUP PRIMARY |
Парткод: | 302N406070 |
Деталь: | ONEWAY-CLUTCH 6 |
Парткод: | 302N406120 |
Деталь: | SPRING PICK UP |
Парткод: | 302K906260 |
Деталь: | GEAR Z28 FEED |
Парткод: | 302N406170 |
Деталь: | PULLEY FEED |
Парткод: | 302N406030 |
Цена: | 440 ₽ |
Деталь: | GEAR Z32 FEED OW |
Парткод: | 302N406100 |
Деталь: | GEAR Z32 PICKUP |
Парткод: | 302N406110 |
Деталь: | PLATE FRAME UPPER |
Парткод: | 302N406010 |
Деталь: | ACTUATOR PAPER EMPTY |
Парткод: | 302K906321 |
Деталь: | HOLDER PICKUP |
Парткод: | 302N406050 |
Деталь: | SHEET SOLENOID |
Парткод: | 303NF06350 |
Деталь: | PIN PICK UP IDLE |
Парткод: | 302K906080 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 302K994580 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | GUIDE PRIM FEED WIRE |
Парткод: | 302K906250 |
Деталь: | SPRING DU |
Парткод: | 302F925780 |
Деталь: | GUIDE VF RIGHT |
Парткод: | 303NF06131 |
Деталь: | FRONT SPONGE CASE STAY |
Парткод: | 302H715070 |
Деталь: | MOUNT PRIMARY FEED |
Парткод: | 302K906100 |
Деталь: | WIRE VERTICAL 1 |
Парткод: | 303NJ46080 |
Деталь: | PLATE EARTH VF |
Парткод: | 303NF06230 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | GUIDE JUNCTION VF |
Парткод: | 303NF06090 |
Деталь: | PARTS ROLLER CONVEYING VF SP |
Парткод: | 303NF94070 |
Деталь: | ACTUATOR VF SENSOR |
Парткод: | 303NF06210 |
Деталь: | COVER MIDDLE |
Парткод: | 303NF06240 |
Деталь: | SPRING ACT DU |
Парткод: | 302H729120 |
Деталь: | BUSH 8 |
Парткод: | 28107310 |
Деталь: | MOUNT SENSOR VF |
Парткод: | 303NF06220 |
Деталь: | STOPPER PI |
Парткод: | 302GR17970 |
Деталь: | CLUTCH 50 Z35R |
Парткод: | 302NH44090 |
Деталь: | PARTS PRIMARY FEED UNIT DECK SP |
Парткод: | 302NH94250 |
Деталь: | PARTS GUIDE VF RIGHT SET SP |
Парткод: | 303NF94162 |
Деталь: | PARTS PULLEY SET SP |
Парткод: | 302N494230 |
Цена: | 1 800 ₽ |
Деталь: | Ролик отделения бумаги в автоподатчике документов |
Парткод: | 303LL07191 |
Цена: | 5 500 ₽ |
Деталь: | SPRING DEV PUSH |
Парткод: | 2C902080 |
Деталь: | ACTUATOR CASSETTE |
Парткод: | 303NF10230 |
Деталь: | PARTS MOTOR LIFT DECK SP |
Парткод: | 303NF94091 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | SW.PUSH |
Парткод: | 7SP01000006+H01 |
Деталь: | GUIDE LOWER MID |
Парткод: | 303NF06120 |
Деталь: | GUIDE UPPER MID |
Парткод: | 303NF06110 |
Деталь: | PARTS PWB FRONT DECK ASSY SP |
Парткод: | 302NH94300 |
Деталь: | MOUNT ACTUATOR CASSETTE |
Парткод: | 303NF10240 |
Деталь: | SPRING ACT DU |
Парткод: | 302H729120 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610002++H01 |
Деталь: | GUIDE WIRE FRONT PWB |
Парткод: | 302LF39050 |
Деталь: | HOLDER PWB |
Парткод: | 302K939230 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210005++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610003++H01 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610008++H01 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | PIN,DRAWER SIDE CONVEYING |
Парткод: | 3CZ02240 |
Деталь: | MOUNT PWB MAIN |
Парткод: | 303NF39052 |
Деталь: | PARTS UNIT LOW VOLTAGE 100 SP |
Парткод: | 302L794131 |
Деталь: | PARTS UNIT LOW VOLTAGE 200 SP |
Парткод: | 302L794141 |
Деталь: | MOUNT LVU SUB |
Парткод: | 302NH39310 |
Деталь: | HOLDER DECK SENSOR |
Парткод: | 303NF10330 |
Деталь: | LABEL HIGH TEMP |
Парткод: | 302K934150 |
Деталь: | HEATER DEHUMIDIFIER 100 |
Парткод: | 302RH44030 |
Деталь: | COVER CONNECTOR HEATER |
Парткод: | 303NF04140 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | DUCT ISU REAR LEFT LOW |
Парткод: | 302NH33010 |
Деталь: | DUCT ISU REAR LEFT UP |
Парткод: | 302NH33020 |
Деталь: | SEAL DUCT EXIT |
Парткод: | 302K933580 |
Деталь: | FAN MOTOR |
Парткод: | 302HN44010 |
Деталь: | FAN LSU 60-25 |
Парткод: | 302GR44080 |
Цена: | 2 800 ₽ |
Деталь: | PARTS FAN COOLING DLP 70 SP |
Парткод: | 302K994350 |
Деталь: | PARTS FAN COOLING LSU 60 SP |
Парткод: | 302LC94380 |
Деталь: | PARTS,FAN COOLING DLP 70 SP |
Парткод: | 302FZ94380 |
Деталь: | PARTS FAN COOLING LSU 50 SP |
Парткод: | 302K994A50 |
Деталь: | SHEET DUCT LSU |
Парткод: | 302K933370 |
Деталь: | SCREW FAN |
Парткод: | 302H733430 |
Деталь: | SHEET DUCT DLP C |
Парткод: | 302K933320 |
Деталь: | RETAINER M4 |
Парткод: | 3CY06030 |
Деталь: | DUCT ISU RIGHT UPPER |
Парткод: | 302LF33520 |
Деталь: | SEAL LSU DUCT |
Парткод: | 302K933551 |
Деталь: | DUCT LSU FRONT A |
Парткод: | 302K933610 |
Деталь: | FILM LSU FRONT A |
Парткод: | 302K933850 |
Деталь: | SPONGE DUCT LSU B |
Парткод: | 302K933350 |
Деталь: | SPONGE WIRE |
Парткод: | 302K319080 |
Деталь: | DUCT LSU FRONT B |
Парткод: | 302K933620 |
Деталь: | SEAL CASE DLP |
Парткод: | 302K914A50 |
Деталь: | SEAL DUCT LSU A |
Парткод: | 302K933880 |
Деталь: | SEAL DUCT LSU C |
Парткод: | 302K933900 |
Деталь: | SEAL DUCT LSU B |
Парткод: | 302K933890 |
Деталь: | FILM LSU FRONT B |
Парткод: | 302K933860 |
Деталь: | WIRE LSU FAN |
Парткод: | 302K946AM0 |
Деталь: | DUCT DLP B |
Парткод: | 302K933660 |
Деталь: | DUCT DLP C |
Парткод: | 302K933670 |
Деталь: | SEAL MOTOR DC |
Парткод: | 302LC31511 |
Деталь: | DUCT ISU LOWER RIGHT |
Парткод: | 302LF33500 |
Деталь: | FILM ISU DUCT |
Парткод: | 302LF33571 |
Деталь: | SPONGE ISU LOWER D |
Парткод: | 302LF33560 |
Деталь: | SPONGE ISU LOWER C |
Парткод: | 302LF33550 |
Деталь: | DUCT ISU LOWER LEFT |
Парткод: | 302LF33410 |
Деталь: | SPONGE ISU LOWER A |
Парткод: | 302LF33440 |
Деталь: | SPONGE ISU LOWER B |
Парткод: | 302LF33450 |
Деталь: | DUCT FUSER REAR |
Парткод: | 302K933190 |
Деталь: | DUCT ISU RIGHT LOWER |
Парткод: | 302LF33510 |
Деталь: | SPONGE DUCT DLP B |
Парткод: | 302K933380 |
Деталь: | DUCT EXIT RIGHT |
Парткод: | 302K933151 |
Деталь: | DUCT EXIT LEFT |
Парткод: | 302K933161 |
Деталь: | DUCT FUSER RIGHT |
Парткод: | 302K933560 |
Деталь: | DUCT FUSER LEFT |
Парткод: | 302K933573 |
Деталь: | DUCT FAN BELT A |
Парткод: | 302K933591 |
Деталь: | DUCT FAN BELT B |
Парткод: | 302K933601 |
Деталь: | SHEET HOUSING LEFT |
Парткод: | 302HN02930 |
Деталь: | ACCESS.SPACER |
Парткод: | 7YZM510007++H01 |
Деталь: | TERMINAL HV MAIN |
Парткод: | 302NH39140 |
Деталь: | SPRING HV MC K |
Парткод: | 302NH39150 |
Деталь: | SPRING HV MC M |
Парткод: | 302NH39160 |
Деталь: | SPRING HV MC C |
Парткод: | 302NH39170 |
Деталь: | SPRING HV MC Y |
Парткод: | 302NH39180 |
Деталь: | SPRING MAG K |
Парткод: | 302NH39190 |
Деталь: | SPRING MAG M |
Парткод: | 302NH39200 |
Деталь: | SPRING MAG C |
Парткод: | 302NH39210 |
Деталь: | SPRING MAG Y |
Парткод: | 302NH39220 |
Деталь: | SPRING SLEEVE K |
Парткод: | 302NH39230 |
Деталь: | SPRING SLEEVE M |
Парткод: | 302NH39240 |
Деталь: | SPRING SLEEVE C |
Парткод: | 302NH39250 |
Деталь: | SPRING SLEEVE Y |
Парткод: | 302NH39260 |
Деталь: | PARTS UNIT HIGH VOLTAGE MAIN SP |
Парткод: | 302NH94380 |
Деталь: | TERMINAL HV TRANS |
Парткод: | 302NH39100 |
Деталь: | PIN HV CONTACT |
Парткод: | 302K939260 |
Деталь: | SPRING HV TRANS |
Парткод: | 302K939280 |
Деталь: | TERMINAL HV CLN |
Парткод: | 302NH39110 |
Деталь: | SPRING HV TRANS CLN |
Парткод: | 302NH39430 |
Деталь: | SPRING TRANS CLN BIAS |
Парткод: | 302NH39440 |
Деталь: | TERMINAL HV DRIVE |
Парткод: | 302K939291 |
Деталь: | SPRING HV DRIVE |
Парткод: | 302K939300 |
Деталь: | SPRING HV SEPARATION |
Парткод: | 302K939310 |
Деталь: | PLATE HVU TRANS |
Парткод: | 302NH39090 |
Деталь: | COVER HVU TRANS |
Парткод: | 302NH39350 |
Деталь: | PARTS UNIT HIGH VOLTAGE TRANSFER SP |
Парткод: | 302NH94370 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610010++H01 |
Деталь: | SPRING SHUTTER |
Парткод: | 302K912330 |
Деталь: | HOLDER MOTOR CLN |
Парткод: | 302K923520 |
Деталь: | PARTS CLN WT MOTOR ASSY (M) SP |
Парткод: | 302K994B11 |
Деталь: | PARTS FUSER SENSOR ASSY SP |
Парткод: | 302NH94450 |
Деталь: | PARTS FAN COOLING LSU 60 SP |
Парткод: | 302LC94380 |
Деталь: | RETAINER M4 |
Парткод: | 3CY06030 |
Деталь: | DUCT DLP B |
Парткод: | 302LC33441 |
Деталь: | DUCT DLP A |
Парткод: | 302K933651 |
Деталь: | SPONGE DLP COOLING A |
Парткод: | 302LC33480 |
Деталь: | PARTS FAN CENTER 60 25 SP |
Парткод: | 302ND94590 |
Деталь: | PARTS PWB MOTOR JUNCTION ASSY SP |
Парткод: | 302NH94330 |
Деталь: | GUIDE WIRE LVU |
Парткод: | 302NH39070 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210010++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610003++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610008++H01 |
Деталь: | ACCESS.SPACER |
Парткод: | 7YZM510021++H01 |
Деталь: | PLATE OPTION COIN-VENDOR |
Парткод: | 302NH39410 |
Деталь: | LID VENDOR |
Парткод: | 302FB26290 |
Деталь: | PARTS CLN WT UNIT(M) SP |
Парткод: | 302NH94040 |
Деталь: | STOPPER BYPASS TABLE |
Парткод: | 302R408220 |
Деталь: | PARTS PWB MPF SIZE ASSY SP |
Парткод: | 302K994621 |
Деталь: | TRAY MPF A |
Парткод: | 302NH08010 |
Деталь: | TRAY MPF B |
Парткод: | 302NH08020 |
Деталь: | TRAY MPF C |
Парткод: | 302K908050 |
Деталь: | TRAY MPF D |
Парткод: | 302K908060 |
Деталь: | RACK CURSOR MPF |
Парткод: | 302K908120 |
Деталь: | ACTUATOR SIZE DETECTION |
Парткод: | 302K908211 |
Деталь: | TERMINAL PAPER SIZE |
Парткод: | 3HL06110 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | SW.PUSH |
Парткод: | 7SP01000006+H01 |
Деталь: | LABEL MPF CAUTION A |
Парткод: | 302NH34500 |
Деталь: | LABEL MPF PAPER LIMIT |
Парткод: | 302NH34520 |
Деталь: | SPRING-COMPRESSION LIFT |
Парткод: | 302K908200 |
Деталь: | SHAFT LIFT MPF |
Парткод: | 302K908190 |
Деталь: | ARM LIFT A |
Парткод: | 302K908130 |
Деталь: | CUT WASHER 4 |
Парткод: | 302FB09830 |
Деталь: | ARM LIFT B |
Парткод: | 302K908140 |
Деталь: | HOLDER MPF TABLE |
Парткод: | 302K908650 |
Деталь: | SPRING PF |
Парткод: | 303LL07471 |
Деталь: | SPRING-TORSION SIZE DETECTION |
Парткод: | 302K908220 |
Деталь: | HOLDER SIZE DETECTION |
Парткод: | 302K908580 |
Деталь: | GUIDE WIRE TRAY |
Парткод: | 302K908160 |
Деталь: | WIRE MPF SIZE DETECTION |
Парткод: | 302K946600 |
Деталь: | SPONGE WIRE MPT |
Парткод: | 302H708150 |
Деталь: | BASE LIFT |
Парткод: | 302NH08050 |
Деталь: | PAD BOTTOM |
Парткод: | 302F909211 |
Деталь: | WIRE MPF TRAY |
Парткод: | 302K946380 |
Деталь: | SPRING DRUM JOINT |
Парткод: | 302H712650 |
Деталь: | CURSOR MPF R |
Парткод: | 302K908110 |
Деталь: | CURSOR MPF F |
Парткод: | 302K908100 |
Деталь: | COVER CURSOR |
Парткод: | 302NH08060 |
Деталь: | IDLE GEAR 40,TONER SUPPLY |
Парткод: | 65815060 |
Деталь: | SEAL FRAME ISU |
Парткод: | 302K917100 |
Деталь: | LABEL MPF SIZE INDICATOR IN |
Парткод: | 302NH34540 |
Деталь: | LABEL MPF SIZE INDICATOR ME |
Парткод: | 302NH34530 |
Деталь: | PARTS MPT TRAY UNIT SP |
Парткод: | 302NH94261 |
Деталь: | COVER ISU LEFT INNER |
Парткод: | 302NH04400 |
Деталь: | MAGNET CLIP DISH |
Парткод: | 302GR04370 |
Деталь: | HOLDER MAGNET |
Парткод: | 303NB24210 |
Деталь: | SEAL MAGNET |
Парткод: | 302GR04380 |
Деталь: | COVER RIGHT FRONT |
Парткод: | 302NH29010 |
Деталь: | COVER INNER CONVEYING FRONT |
Парткод: | 302N729671 |
Деталь: | CASE WASTE BOTTLE |
Парткод: | 302K904490 |
Деталь: | COVER ISU REAR |
Парткод: | 302NH04080 |
Деталь: | COVER ISU LEFT SUB |
Парткод: | 302NH04560 |
Деталь: | LID CONTROLLER |
Парткод: | 302NH04580 |
Деталь: | COVER CONTROLLER |
Парткод: | 302NH04230 |
Деталь: | MOUNT GLASS TABLE |
Парткод: | 302NH04270 |
Деталь: | SHEET GLASS TABLE |
Парткод: | 302NH04370 |
Деталь: | MOUNT WASTE BOTTLE COVER |
Парткод: | 302K904340 |
Деталь: | COVER FRONT TOP |
Парткод: | 302NH04040 |
Деталь: | LABEL OPERATION CAUTION B |
Парткод: | 302RH34050 |
Деталь: | LABEL OPERATION CAUTION A |
Парткод: | 302RH34040 |
Деталь: | LID LEFT COVER REAR |
Парткод: | 302NH04500 |
Деталь: | FILTER LEFT SIDE |
Парткод: | 302LC33370 |
Цена: | 3 900 ₽ |
Деталь: | COVER LEFT UPPER |
Парткод: | 302NH04220 |
Деталь: | SPONGE LEFT COVER |
Парткод: | 302K933G20 |
Деталь: | SPONGE COVER LEFT UPPER D |
Парткод: | 302K933930 |
Деталь: | SPONGE DUCT DLP C |
Парткод: | 302K933330 |
Деталь: | SPONGE COVER LEFT UPPER A |
Парткод: | 302K933790 |
Деталь: | SPONGE COVER LEFT UPPER B |
Парткод: | 302K933800 |
Деталь: | SPONGE COVER LEFT UPPER C |
Парткод: | 302K933920 |
Деталь: | LID LEFT COVER |
Парткод: | 302NH04550 |
Деталь: | SEAL FRAME LEFT |
Парткод: | 302K933910 |
Деталь: | SHEET FRAME CENTER |
Парткод: | 302J502020 |
Деталь: | FILM SEAL TONER C |
Парткод: | 302K933840 |
Деталь: | FILTER TOP |
Парткод: | 302WA33010 |
Деталь: | COVER FILTER EXIT |
Парткод: | 302ND04980 |
Деталь: | SEAL DISPOSAL C |
Парткод: | 302LF33290 |
Деталь: | MC-8720 |
Парткод: | 302NH93071 |
Деталь: | DV-8720K |
Парткод: | 302NH93020 |
Деталь: | DV-8720K(J) |
Парткод: | 302NH9J020 |
Деталь: | DV-8720M |
Парткод: | 302NH93040 |
Деталь: | DV-8720M(J) |
Парткод: | 302NH9J040 |
Деталь: | DV-8720C |
Парткод: | 302NH93030 |
Деталь: | DV-8720C(J) |
Парткод: | 302NH9J030 |
Деталь: | DV-8720Y |
Парткод: | 302NH93050 |
Деталь: | DV-8720Y(J) |
Парткод: | 302NH9J050 |
Деталь: | SHUTTER PIPE UP |
Парткод: | 302H703100 |
Деталь: | SEAL PIPE DLP UP |
Парткод: | 302H703130 |
Деталь: | SPRING PIPE UP |
Парткод: | 302H703240 |
Деталь: | SEAL CONT SHUTTER |
Парткод: | 302H703570 |
Деталь: | SPRING SHUTTER |
Парткод: | 302K914370 |
Деталь: | SHUTTER HOPPER UP |
Парткод: | 302K915240 |
Деталь: | GUIDE CONTAINER K |
Парткод: | 302NH15020 |
Деталь: | GUIDE CONTAINER M |
Парткод: | 302NH15030 |
Деталь: | GUIDE CONTAINER C |
Парткод: | 302NH15040 |
Деталь: | GUIDE CONTAINER Y |
Парткод: | 302NH15050 |
Деталь: | COVER CONTAINER GUIDE |
Парткод: | 302NH15010 |
Деталь: | SEAL SHUTTER |
Парткод: | 302K915320 |
Деталь: | PIPE DLP UP |
Парткод: | 302H703542 |
Деталь: | DK-8720 |
Парткод: | 302NH93061 |
Деталь: | ACTUATOR EJECT SW |
Парткод: | 303M429040 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | BUSH SCREW |
Парткод: | 302H702590 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | PARTS ROLLER EJECT SP |
Парткод: | 303M494110 |
Деталь: | GEAR CIS ROLLER 20 |
Парткод: | 3H622020 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | GEAR Z33 |
Парткод: | 303M407110 |
Деталь: | PULLEY SEPARATION |
Парткод: | 303LL07190 |
Деталь: | TORQUE LIMITER FEED |
Парткод: | 303JX07400 |
Деталь: | RING STOPPER 4 |
Парткод: | 5MVL177DN001 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 303NW94040 |
Деталь: | SHAFT GUIDE READING |
Парткод: | 303M824130 |
Деталь: | JOINT RETARD DRIVE |
Парткод: | 302K906180 |
Деталь: | COLLAR PF C |
Парткод: | 303NV07020 |
Деталь: | PULLEY LF |
Парткод: | 303M407480 |
Цена: | 5 000 ₽ |
Деталь: | FILM TORQUE LIMITER |
Парткод: | 303MW07060 |
Деталь: | PULLEY GUIDE READING |
Парткод: | 303LL24190 |
Деталь: | PARTS GUIDE SEPARATE ASSY SP |
Парткод: | 303M494200 |
Деталь: | SPRING CURSOR R |
Парткод: | 2C907360 |
Деталь: | CAP SPRING /B-11 ENCLOSURE A4 |
Парткод: | 2FM04150 |
Деталь: | PULLEY DU LOW |
Парткод: | 302F929260 |
Деталь: | BUSHING PF HOLDER |
Парткод: | 303H607131 |
Деталь: | PULLEY TENSION |
Парткод: | 303H607280 |
Деталь: | STATIC ELIMINATOR EJECT |
Парткод: | 303K502130 |
Деталь: | BELT PF |
Парткод: | 303LL07531 |
Цена: | 1 900 ₽ |
Деталь: | PULLEY 20 |
Парткод: | 303M407080 |
Деталь: | PULLEY HOLDER LF |
Парткод: | 303M407200 |
Деталь: | PULLEY 20 LF |
Парткод: | 303M407220 |
Деталь: | CUT WASHER 4 |
Парткод: | 2BG22990 |
Деталь: | STOPPER BYPASS TABLE |
Парткод: | 2FB07330 |
Деталь: | SPRING BELT TENTION |
Парткод: | 303M407540 |
Деталь: | BUSH 8 |
Парткод: | 28107310 |
Деталь: | COVER PF ROLLER |
Парткод: | 303M407021 |
Деталь: | Label JAM |
Парткод: | 303R834110 |
Деталь: | SHAFT EXIT |
Парткод: | 302R829010 |
Деталь: | COUPLING PRIMARY FEED DRIVE |
Парткод: | 302K906140 |
Деталь: | PLATE EARTH SHAFT PF |
Парткод: | 303M407550 |
Деталь: | SPRING-TORSION SWITCHBACK |
Парткод: | 302K928190 |
Деталь: | STAY LOOP UPPER |
Парткод: | 303M402070 |
Деталь: | GUIDE UPPER |
Парткод: | 303M407011 |
Деталь: | HOLDER LF |
Парткод: | 303M407030 |
Деталь: | HOLDER PF |
Парткод: | 303M407040 |
Деталь: | COLLAR PF B |
Парткод: | 303M407050 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | SHAFT BELT |
Парткод: | 303M407060 |
Деталь: | BELT 172 LF |
Парткод: | 303M407090 |
Деталь: | GUIDE LOWER PF |
Парткод: | 303M407101 |
Деталь: | PLATE EARTH EJECT |
Парткод: | 303M429030 |
Деталь: | SPRING EARTH |
Парткод: | 303M407150 |
Деталь: | SPRING HOLDER LF |
Парткод: | 303M407160 |
Деталь: | SHAFT LF |
Парткод: | 303M407210 |
Деталь: | HOOK COVER |
Парткод: | 303M407231 |
Деталь: | SHAFT HOOK |
Парткод: | 303M407240 |
Деталь: | SPRING HOOK FRONT |
Парткод: | 303M407421 |
Деталь: | SHAFT PULLEY TENSION |
Парткод: | 303M407440 |
Деталь: | SLIDER TENSION |
Парткод: | 303M407450 |
Деталь: | GUIDE EJECT LOWER |
Парткод: | 303M424231 |
Деталь: | GUIDE EJECT UPPER |
Парткод: | 303M429020 |
Деталь: | RING STOPPER 6 |
Парткод: | 5MVL177DN002 |
Деталь: | STOPPER 3 /2BT1107 A4 |
Парткод: | 5MVX111DN007 |
Деталь: | MOUNT SENSOR RX |
Парткод: | 303M407140 |
Деталь: | PARTS PWB TX ASSY SP |
Парткод: | 303M494150 |
Деталь: | PARTS PWB RX ASSY SP |
Парткод: | 303M494160 |
Деталь: | SHAFT PF |
Парткод: | 303M407070 |
Деталь: | PARTS PWB TX-RX SET SP |
Парткод: | 303M494190 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | HOLDER SENSOR FEED |
Парткод: | 302K906290 |
Деталь: | PLATE FRAME LOWER |
Парткод: | 302NH06080 |
Деталь: | SHAFT FEED LOW |
Парткод: | 302NH06980 |
Деталь: | PULLEY RETARD |
Парткод: | 302N406040 |
Цена: | 450 ₽ |
Деталь: | LEVER RETARD LOCK |
Парткод: | 302N406160 |
Деталь: | PLATE RETARD ADJUST |
Парткод: | 302K906420 |
Деталь: | SPONGE WIRE MPT |
Парткод: | 302H708150 |
Деталь: | HOLDER PULLEY |
Парткод: | 302K906700 |
Деталь: | PULLEY DU LOW |
Парткод: | 302F929260 |
Деталь: | SHAFT ASSIST PULLEY |
Парткод: | 302NH06990 |
Деталь: | HOLDER RETARD |
Парткод: | 302NH06070 |
Деталь: | HOLDER PRIM FEED PULLEY |
Парткод: | 302K906280 |
Деталь: | LOWER BUSHING,PAPER FEED |
Парткод: | 34806040 |
Деталь: | TORQUE-LIMITER 390 |
Парткод: | 302K906750 |
Деталь: | PLATE RETARD HOLDER |
Парткод: | 302NH06090 |
Деталь: | FULCRUM-PIN RETARD |
Парткод: | 302N406150 |
Деталь: | LEVER RETARD RELEASE |
Парткод: | 302N406130 |
Деталь: | SPRING RETARD |
Парткод: | 302NH06100 |
Деталь: | SHEET PRIMARY FEED HI |
Парткод: | 302K906721 |
Деталь: | GUIDE FRONT LOWER |
Парткод: | 302N406060 |
Деталь: | SPRING RETARD LOCK |
Парткод: | 302N406140 |
Деталь: | PLATE PRIMARY FEED DRIVE |
Парткод: | 302K906111 |
Деталь: | MOUNT PRIMARY FEED R |
Парткод: | 302K906270 |
Деталь: | SHAFT PICKUP PRIMARY |
Парткод: | 302N406070 |
Деталь: | ONEWAY-CLUTCH 6 |
Парткод: | 302N406120 |
Деталь: | SPRING PICK UP |
Парткод: | 302K906260 |
Деталь: | GEAR Z28 FEED |
Парткод: | 302N406170 |
Деталь: | PULLEY FEED |
Парткод: | 302N406030 |
Цена: | 440 ₽ |
Деталь: | GEAR Z32 FEED OW |
Парткод: | 302N406100 |
Деталь: | GEAR Z32 PICKUP |
Парткод: | 302N406110 |
Деталь: | PLATE FRAME UPPER |
Парткод: | 302N406010 |
Деталь: | ACTUATOR PAPER EMPTY |
Парткод: | 302K906321 |
Деталь: | HOLDER PICKUP |
Парткод: | 302N406050 |
Деталь: | SHEET SOLENOID |
Парткод: | 303NF06350 |
Деталь: | PIN PICK UP IDLE |
Парткод: | 302K906080 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 302K994580 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | GUIDE PRIM FEED WIRE |
Парткод: | 302K906250 |
Деталь: | WIRE PRIMARY FEED UNIT |
Парткод: | 302N446280 |
Деталь: | SPRING SWITCHBACK |
Парткод: | 302LC28240 |
Деталь: | SPRING LOCK MPF |
Парткод: | 302F708310 |
Деталь: | PARTS ROLLER ASSIST SP |
Парткод: | 302K994420 |
Деталь: | COUPLING DRIVE |
Парткод: | 302K931530 |
Деталь: | CUSHION,CONTACT GLASS |
Парткод: | 29812291 |
Деталь: | GUIDE PRIMARY FEED |
Парткод: | 302K906051 |
Деталь: | MOUNT PRIMARY FEED |
Парткод: | 302K906100 |
Деталь: | PARTS PRIMARY FEED UNIT HI SP |
Парткод: | 302NH94220 |
Деталь: | PARTS GUIDE PRIMARY FEED SET SP |
Парткод: | 302K994B90 |
Деталь: | PARTS PULLEY SET SP |
Парткод: | 302N494230 |
Цена: | 1 800 ₽ |
Деталь: | COVER DECK REAR |
Парткод: | 302NH04440 |
Деталь: | STRAP |
Парткод: | 303NJ06050 |
Деталь: | SHAFT FEED LOW HOOK |
Парткод: | 302K906681 |
Деталь: | HANDLE FEED LOW |
Парткод: | 302NH06040 |
Деталь: | HOOK FEED LOW |
Парткод: | 302K906670 |
Деталь: | COVER FEED LOW |
Парткод: | 302NH06060 |
Деталь: | SPRING LID |
Парткод: | 302FZ20021 |
Деталь: | LEVER SW |
Парткод: | 303NF06170 |
Деталь: | GUIDE VERTICAL |
Парткод: | 303NF06141 |
Деталь: | COVER RIGHT LOWER M |
Парткод: | 302NH04450 |
Деталь: | PLATE JOINT RIGHT |
Парткод: | 302K902290 |
Деталь: | COVER MOUNT SLIDER |
Парткод: | 303NF04130 |
Деталь: | PLATE LOW |
Парткод: | 303NF02122 |
Деталь: | PARTS MOTOR-BL W30 DRUM SP |
Парткод: | 302K994292 |
Деталь: | PARTS MOTOR-BL INNER W10 SP |
Парткод: | 302NH94140 |
Деталь: | PLATE TRANSFER DRIVE |
Парткод: | 302NH31910 |
Деталь: | BUSH DRIVE |
Парткод: | 302RH31150 |
Деталь: | GEAR Z100R Z48R |
Парткод: | 302K931920 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | PARTS MOTOR-BL W30 SP |
Парткод: | 302K994334 |
Деталь: | GEAR Z90R JOINT |
Парткод: | 302K931620 |
Деталь: | SPRING PADDLE CONT D |
Парткод: | 302H731650 |
Деталь: | JOINT FUSER DRIVE |
Парткод: | 302K931640 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | CUT WASHER 5X10 |
Парткод: | 302LC31640 |
Деталь: | GEAR Z67S-Z25S |
Парткод: | 302K931670 |
Деталь: | SPRING JOINT |
Парткод: | 302K931660 |
Деталь: | GEAR Z50S JOINT |
Парткод: | 302K931630 |
Деталь: | CONN.CORD ASSY FUSER MOTOR H |
Парткод: | 302NH46020 |
Деталь: | PLATE FUSER DRIVE |
Парткод: | 302K931612 |
Деталь: | PARTS MOTOR-BL W30 DLP SP |
Парткод: | 302K994894 |
Деталь: | BUSH SCREW |
Парткод: | 302H702590 |
Деталь: | SHAFT DLP DRIVE |
Парткод: | 302K931180 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | GEAR Z74R |
Парткод: | 302K931190 |
Деталь: | BUSH 8 |
Парткод: | 302H024830 |
Деталь: | HOLDER MAIN DRIVE |
Парткод: | 302K931163 |
Деталь: | PLATE EARTH MAIN |
Парткод: | 302K931170 |
Деталь: | COLLAR DLP COUPLING |
Парткод: | 302FZ31280 |
Деталь: | SPRING COUPLING DLP |
Парткод: | 302BG22531 |
Деталь: | COUPLING DLP DRIVE |
Парткод: | 302FZ31250 |
Деталь: | CONN.CORD ASSY DLP MOT |
Парткод: | 302NH46030 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610008++H01 |
Деталь: | PLATE MAIN DRIVE |
Парткод: | 302K931232 |
Деталь: | GEAR Z160R |
Парткод: | 302K931570 |
Деталь: | BEARING 6800ZZ(7MM) |
Парткод: | 7BE010197431H01 |
Деталь: | STOPPER 8 |
Парткод: | 302K921120 |
Деталь: | CUT-WASHER 8X17 |
Парткод: | 302K931840 |
Деталь: | HOLDER DRUM DRIVE |
Парткод: | 302K931013 |
Деталь: | PLATE DRUM DRIVE |
Парткод: | 302K931022 |
Деталь: | PLATE EARTH DRUM |
Парткод: | 302K931070 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | PLATE MOTOR DRUM |
Парткод: | 302K931100 |
Деталь: | HOLDER BEARING SUPPORT |
Парткод: | 302K931060 |
Деталь: | SPRING DRUM JOINT |
Парткод: | 302LC31070 |
Деталь: | COUPLING DRUM |
Парткод: | 302K931130 |
Деталь: | SHAFT DRUM DRIVE |
Парткод: | 302K931041 |
Деталь: | WIRE ENCODER |
Парткод: | 302K946300 |
Деталь: | BRACKET ENCORDER |
Парткод: | 302K931050 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | ENCORDER DRUM |
Парткод: | 302K931090 |
Деталь: | HOLDER SENSOR DRUM |
Парткод: | 302K931150 |
Деталь: | PARTS TRANSFER DRIVE UNIT SP |
Парткод: | 302NH94291 |
Деталь: | PARTS FUSER DRIVE UNIT SP |
Парткод: | 302NH94151 |
Деталь: | DR-8720 |
Парткод: | 302NH93151 |
Деталь: | DRUM DRIVE H UNIT SP |
Парткод: | 302NH93201 |
Деталь: | Ролик подачи бумаги |
Парткод: | 302K906350 |
Цена: | 210 ₽ |
Деталь: | Ролик отделения бумаги |
Парткод: | 302K906360 |
Цена: | 460 ₽ |
Деталь: | Ролик захвата бумаги |
Парткод: | 302K906370 |
Цена: | 460 ₽ |
Деталь: | Кассета на 500 листов |
Парткод: | CT-8720 |
Цена: | 15 700 ₽ |
Деталь: | Средняя направляющая узла подачи бумаги, в сборе |
Парткод: | 302K994132 |
Цена: | 4 900 ₽ |
Деталь: | Узел подачи бумаги, в сборе |
Парткод: | 303NJ94110 |
Цена: | 9 800 ₽ |
Деталь: | Кассета на 500 листов, в сборе |
Парткод: | CT-8705 |
Деталь: | Средний узел подачи бумаги дополнительного лотка, в сборе |
Парткод: | 303NF94011 |
Деталь: | PARTS PWB BRIDGE ASSY SP |
Парткод: | 302K994830 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | SW.PUSH |
Парткод: | 7SP01000006+H01 |
Деталь: | GEAR Z31R-Z20R |
Парткод: | 302LF28140 |
Деталь: | GEAR Z42L |
Парткод: | 302LF28150 |
Деталь: | GEAR Z14S-Z30R |
Парткод: | 302LF28300 |
Деталь: | ACTUATOR PRESS |
Парткод: | 302LF28472 |
Деталь: | GEAR Z21S |
Парткод: | 302LF28280 |
Деталь: | GEAR Z21S-Z40R |
Парткод: | 302LF28290 |
Деталь: | PARTS MOTOR PM FEED SP |
Парткод: | 302K994300 |
Деталь: | FRAME DRIVE |
Парткод: | 302LF28093 |
Деталь: | PLATE DRIVE A |
Парткод: | 302LF28101 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | STOPPER RELAY |
Парткод: | 302LF28590 |
Деталь: | SPRING COMPRESSION RELAY |
Парткод: | 302LF28610 |
Деталь: | PIN FEED DRIVE |
Парткод: | 303NJ31120 |
Деталь: | PLATE MOTOR DRIVE |
Парткод: | 302LF28113 |
Деталь: | GUIDE HARNESS |
Парткод: | 302LF28560 |
Деталь: | GROUND PLATE DECK UNIT |
Парткод: | 302FB09320 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | PLATE MOTOR PRESS DRIVE |
Парткод: | 302LF28461 |
Деталь: | GUIDE DECURLER PIN |
Парткод: | 302LF28600 |
Деталь: | STOPPER 3 /2BT1107 A4 |
Парткод: | 5MVX111DN007 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | ACTUATOR HF |
Парткод: | 303NF06040 |
Деталь: | PARTS ROLLER CONVEYING DECK SP |
Парткод: | 303NF94100 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | GUIDE HF LOWER |
Парткод: | 303NF06011 |
Деталь: | LABEL DECK B1 |
Парткод: | 303NF34100 |
Деталь: | CUSHION ACTUATOR |
Парткод: | 303NF06340 |
Деталь: | PLATE HF ROLLER |
Парткод: | 303NF06060 |
Деталь: | BUSH 8 |
Парткод: | 28107310 |
Деталь: | PIN HF LOWER |
Парткод: | 303NF06270 |
Деталь: | LID WIRE |
Парткод: | 303NF06260 |
Деталь: | PLATE HF L |
Парткод: | 303NF06050 |
Деталь: | GUIDE HF LEFT |
Парткод: | 303NF06030 |
Деталь: | RAIL HF LEFT |
Парткод: | 303NF06020 |
Деталь: | SLIDER HF RAIL |
Парткод: | 303NF06070 |
Деталь: | RAIL HF LOWER |
Парткод: | 303NF06282 |
Деталь: | SLIDER HF FRONT |
Парткод: | 303NF06302 |
Деталь: | GUIDE HF UPPER |
Парткод: | 303NF06080 |
Деталь: | LABEL DECK B2 |
Парткод: | 303NF34110 |
Деталь: | PULLEY MIDDLE A |
Парткод: | 302H722760 |
Деталь: | SPRING DECK FEED |
Парткод: | 303NF06320 |
Деталь: | LEVER HF UPPER |
Парткод: | 303NF06180 |
Деталь: | SPRING LOCK MPF |
Парткод: | 302F708310 |
Деталь: | STAY GUIDE UPPER |
Парткод: | 303NF06310 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | SPRING ACT DU |
Парткод: | 302H729120 |
Деталь: | COVER BOTTOM RIGHT |
Парткод: | 303R804130 |
Деталь: | TRAY EJECT |
Парткод: | 303R804010 |
Деталь: | TRAY SLIDE |
Парткод: | 303R702100 |
Деталь: | Hinge Left |
Парткод: | 303M402021 |
Деталь: | Hinge Right |
Парткод: | 303M402031 |
Деталь: | SPRING PUSH SW |
Парткод: | 303JX02090 |
Деталь: | ACTUATOR ISU SW |
Парткод: | 303R802010 |
Деталь: | STOPPER EJECT |
Парткод: | 303R702110 |
Деталь: | HOLDER SPRING PUSH SW |
Парткод: | 303LL02150 |
Деталь: | MOUNT CUSHION |
Парткод: | 303LL02410 |
Деталь: | SPRING PUSH MAT |
Парткод: | 303LL02430 |
Деталь: | GROUND PLATE HINGE |
Парткод: | 303LL02520 |
Деталь: | CUSHION ORIGINAL MAT |
Парткод: | 303LL02531 |
Деталь: | PLATE HINGE UPPER |
Парткод: | 303M402180 |
Деталь: | STAY EJECT TRAY |
Парткод: | 303M402190 |
Деталь: | CUSHION BASE |
Парткод: | 303NV02070 |
Деталь: | PLATE ANGLE |
Парткод: | 303M402170 |
Деталь: | SHAFT ANGLE RESTRICTION |
Парткод: | 303JX02391 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | COVER HINGE LEFT |
Парткод: | 303M404070 |
Деталь: | COVER HINGE RIGHT |
Парткод: | 303R804120 |
Деталь: | PLATE GUIDE HINGE |
Парткод: | 303LL02380 |
Деталь: | PLATE GUIDE HINGE |
Парткод: | 303M402200 |
Деталь: | COVER RIGHT LOWER R |
Парткод: | 302NH04420 |
Деталь: | COVER INTERFACE |
Парткод: | 302NH04590 |
Деталь: | COVER INNER CASSETTE L |
Парткод: | 302NH04460 |
Деталь: | RETAINER M4 |
Парткод: | 3CY06030 |
Деталь: | LID RIGHT COVER |
Парткод: | 302NH04480 |
Деталь: | MAGNET CATCH |
Парткод: | 302K904620 |
Деталь: | PLATE MAGNET |
Парткод: | 2FB04270 |
Деталь: | COVER WASTE BOTTLE |
Парткод: | 302NH04050 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | LEVER BOTTLE COVER |
Парткод: | 302K904650 |
Деталь: | PLATE BYPASS HOLD |
Парткод: | 2BL06890 |
Деталь: | HINGE WASTE COVER A |
Парткод: | 302NH04380 |
Деталь: | COVER LEFT LOWER |
Парткод: | 302NH04410 |
Деталь: | SPONGE COVER LEFT LOWER A |
Парткод: | 302K933810 |
Деталь: | SPONGE COVER LEFT LOWER B |
Парткод: | 302K933820 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | COVER HUMIDITY SENSOR |
Парткод: | 302LC02710 |
Деталь: | COVER INNER CASSETTE R |
Парткод: | 302NH04470 |
Деталь: | SHEET HUMIDITY SENSOR |
Парткод: | 302K902980 |
Деталь: | GUIDE WIRE FEED LOW |
Парткод: | 302LC06210 |
Деталь: | COVER RIGHT LOWER B |
Парткод: | 302NH04160 |
Деталь: | Cover Handle |
Парткод: | 302NH04530 |
Деталь: | SPONGE COVER RIGHT LOWER F |
Парткод: | 302K933G40 |
Деталь: | COVER RIGHT LOWER A |
Парткод: | 302NH04070 |
Деталь: | LABEL SW CAUTION EN |
Парткод: | 302NH34310 |
Деталь: | LABEL SW CAUTION JP |
Парткод: | 302NH34300 |
Деталь: | LABEL POWER CABLE CAUTION JP |
Парткод: | 302NH34400 |
Деталь: | SPONGE INNER CASSETTE |
Парткод: | 302K933G50 |
Деталь: | COVER MAIN SWITCH |
Парткод: | 302NH04540 |
Деталь: | COVER RIGHT MIDDLE R |
Парткод: | 302NH04600 |
Деталь: | COVER FRONT UPPER A |
Парткод: | 302NH04010 |
Деталь: | EMBLEM KC 1SG 70 B |
Парткод: | 302DY04011 |
Деталь: | WT-861/WASTE TONER BOTTLE |
Парткод: | 1902K90UN0 |
Деталь: | COVER REAR RIGHT |
Парткод: | 303R804080 |
Деталь: | COVER REAR LEFT |
Парткод: | 303R804070 |
Деталь: | CLEANER CLOTH |
Парткод: | 302N904100 |
Деталь: | LID REAR COVER |
Парткод: | 303R704070 |
Деталь: | LABEL CAUTION HINGE |
Парткод: | 303R834011 |
Деталь: | COVER FRONT TOP |
Парткод: | 303R804060 |
Деталь: | COVER INNER |
Парткод: | 303R804030 |
Деталь: | HOLDER LENS |
Парткод: | 303R724150 |
Деталь: | LENS LED |
Парткод: | 303M407300 |
Деталь: | LABEL C |
Парткод: | 303M434040 |
Деталь: | COVER LEFT |
Парткод: | 303R804020 |
Деталь: | COVER FRONT BOTTOM |
Парткод: | 303R804090 |
Деталь: | PARTS PWB LED ASSY SP |
Парткод: | 303M894100 |
Деталь: | COVER HINGE BOTTOM |
Парткод: | 303R804140 |
Деталь: | PLATE ORIGINAL |
Парткод: | 303JC04201 |
Деталь: | CUSHION ORIGINAL MAT A |
Парткод: | 303MX02022 |
Деталь: | COVER WIRE INTERFACE |
Парткод: | 303R804110 |
Деталь: | PARTS MAT ASSY |
Парткод: | 303LL94032 |
Деталь: | PULLEY MID /B-11 FRAME A4 |
Парткод: | 2FM02210 |
Деталь: | GEAR Z40R-Z28S |
Парткод: | 302K928110 |
Деталь: | CAP SPRING /B-11 ENCLOSURE A4 |
Парткод: | 2FM04150 |
Деталь: | PULLEY DU LOW |
Парткод: | 302F929260 |
Деталь: | PLATE EXIT LOWER |
Парткод: | 302NH28020 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | GEAR Z23S EXIT |
Парткод: | 302H728080 |
Деталь: | SPRING PULLEY A |
Парткод: | 302HN28120 |
Деталь: | SHAFT FEED |
Парткод: | 302K324460 |
Деталь: | SPRING-TORSION SWITCHBACK |
Парткод: | 302K928190 |
Деталь: | PARTS MOTOR PM FEED SP |
Парткод: | 302K994300 |
Деталь: | PARTS SOLENOID FEED SHIFT SP |
Парткод: | 302K994370 |
Деталь: | PARTS ROLLER EXIT SP |
Парткод: | 302NH94130 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | FRAME EXIT UPPER |
Парткод: | 302K928022 |
Деталь: | SPRING-EXTENSION FEED SHIFT |
Парткод: | 302K928070 |
Деталь: | SPRING-EXTENSION |
Парткод: | 302LC28110 |
Деталь: | SPRING PULLEY |
Парткод: | 302F928170 |
Деталь: | ACTUATOR SWITCHBACK |
Парткод: | 302K928091 |
Деталь: | CONN.CORD ASSY EXIT |
Парткод: | 302NH46330 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | PARTS ROLLER EXIT B SP |
Парткод: | 302K994A40 |
Деталь: | FRAME EXIT LOWER |
Парткод: | 302NH28010 |
Деталь: | GUIDE CHANGE LOWER |
Парткод: | 302K928213 |
Деталь: | GUIDE SHIFT UPPER |
Парткод: | 302K928030 |
Деталь: | PLATE EARTH ROLLER F |
Парткод: | 302NH28150 |
Деталь: | GUIDE EXIT MIDDLE |
Парткод: | 302K928051 |
Деталь: | SHEET EXIT MIDDLE A |
Парткод: | 302K928290 |
Деталь: | SHEET EXIT MIDDLE B |
Парткод: | 302K928300 |
Деталь: | PULLEY MIDDLE |
Парткод: | 302JF22010 |
Деталь: | ACTUATOR EXIT SENSOR |
Парткод: | 302K928121 |
Деталь: | PLATE DRIVE FD |
Парткод: | 302NH28130 |
Деталь: | COVER EXIT FRONT |
Парткод: | 302NH28140 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210006++H01 |
Деталь: | STAY EXIT HIGH |
Парткод: | 302K928230 |
Деталь: | PARTS EXIT UNIT A SP |
Парткод: | 302NH94120 |
Деталь: | PARTS GUIDE EXIT MIDDLE SP |
Парткод: | 302K994B80 |
Деталь: | GUIDE HV SEPARATION |
Парткод: | 302K939340 |
Деталь: | PLATE HV SEPARATION |
Парткод: | 302K939350 |
Деталь: | SPRING HV |
Парткод: | 302K939360 |
Деталь: | ADJUSTER SCANNER |
Парткод: | 302K902950 |
Деталь: | MOUNT RUBBER SCANNER |
Парткод: | 302K902960 |
Деталь: | GROUND SCANNER REAR |
Парткод: | 302H017310 |
Деталь: | PIN ROLLER RELEASE LEVER |
Парткод: | 302FB16320 |
Деталь: | FILM BASE CASSETTE |
Парткод: | 302NH02170 |
Деталь: | RAIL EXIT REAR |
Парткод: | 302K902850 |
Деталь: | LEVER RELEASE FUSER DRIVE |
Парткод: | 302K931690 |
Деталь: | SPRING LEVER RELEASE |
Парткод: | 302K931980 |
Деталь: | GROUND BASE SCANNER |
Парткод: | 302H017380 |
Деталь: | SPONGE INNER LOWER |
Парткод: | 302LF33350 |
Деталь: | STAY CASSETTE FRONT |
Парткод: | 302NH09340 |
Деталь: | FILM TE SENSOR |
Парткод: | 302HS08310 |
Деталь: | FILM FRAME UPPER K |
Парткод: | 302K902580 |
Деталь: | FILM FRAME UPPER MC |
Парткод: | 302K902590 |
Деталь: | FILM FRAME UPPER Y |
Парткод: | 302K902600 |
Деталь: | SPRING EARTH HEAT |
Парткод: | 302F925770 |
Деталь: | BASE TOP CONTAINER |
Парткод: | 302NH03341 |
Деталь: | MOUNT SOLENOID |
Парткод: | 302NH03350 |
Деталь: | ACTUATOR LID |
Парткод: | 302NH03370 |
Деталь: | LEVER OPEN COVER |
Парткод: | 302NH03381 |
Деталь: | LEVER OPEN COVER K |
Парткод: | 302NH03390 |
Деталь: | COVER OUTER |
Парткод: | 302NH03400 |
Деталь: | LID TOP CONTAINER |
Парткод: | 302NH03451 |
Деталь: | ACTUATOR SOLENOID |
Парткод: | 302NH03460 |
Деталь: | ACTUATOR SOLENOID K |
Парткод: | 302NH03471 |
Деталь: | SHEET LSU LEFT |
Парткод: | 302K902810 |
Деталь: | FILM S-BOX C |
Парткод: | 302FB26540 |
Деталь: | RAIL CONTAINER C |
Парткод: | 302NH03410 |
Деталь: | RAIL CONTAINER RC |
Парткод: | 302NH03420 |
Деталь: | RAIL CONTAINER L |
Парткод: | 302NH03430 |
Деталь: | RAIL CONTAINER R |
Парткод: | 302NH03810 |
Деталь: | PULLEY FEED PF |
Парткод: | 303NJ06070 |
Деталь: | STOPPER 3 /2BT1107 A4 |
Парткод: | 5MVX111DN007 |
Деталь: | GUIDE WIRE ID |
Парткод: | 302K902820 |
Деталь: | HOOK DLP |
Парткод: | 302FZ02591 |
Деталь: | PLATE HOOK |
Парткод: | 302K903310 |
Деталь: | PIN PLATE HOOK |
Парткод: | 302K903390 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | REAR FILM FRAME MID |
Парткод: | 302H733300 |
Деталь: | SPONGE DUCT LSU A |
Парткод: | 302K933340 |
Деталь: | FILM FRONT FRAME |
Парткод: | 302K933A00 |
Деталь: | SHEET FUSER GUARD |
Парткод: | 302K933360 |
Деталь: | SHEET WIRE CASSETTE |
Парткод: | 302K939610 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610008++H01 |
Деталь: | SPONGE PIPE FRONT |
Парткод: | 302K933D20 |
Деталь: | SEAL SLIDER F |
Парткод: | 302K933E20 |
Деталь: | SEAL SLIDER R |
Парткод: | 302K933E30 |
Деталь: | SEAL LEFT FRONT |
Парткод: | 302K933G10 |
Деталь: | COVER IMAGE RELEASE |
Парткод: | 302NH02550 |
Деталь: | COVER CONNECTOR HEATER |
Парткод: | 303NF04140 |
Деталь: | HEATER DEHUMIDIFIER 100 |
Парткод: | 302NH44060 |
Деталь: | HEATER DEHUMIDIFIER 100 |
Парткод: | 302R444050 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | LABEL HIGH TEMP |
Парткод: | 302K934150 |
Деталь: | MOUNT SOLENOID K |
Парткод: | 302NH03490 |
Деталь: | PARTS STOPPER CONTAINER ASSY SP |
Парткод: | 302NH94271 |
Деталь: | PARTS CLEANER REGIST ASSY SP |
Парткод: | 302LF94160 |
Цена: | 3 500 ₽ |
Деталь: | GUIDE FEED LOW |
Парткод: | 302NH06610 |
Деталь: | SPRING TENSION |
Парткод: | 2DC12170 |
Деталь: | HOLDER FEED LOW PULLEY |
Парткод: | 302K906640 |
Деталь: | SHAFT FEED LOW |
Парткод: | 302NH06980 |
Деталь: | PULLEY MIDDLE A |
Парткод: | 302H722760 |
Деталь: | COVER FEED LOW |
Парткод: | 302NH06030 |
Деталь: | LID SIDE FEED |
Парткод: | 302NH06050 |
Деталь: | SHAFT FEED LOW HOOK |
Парткод: | 302K906681 |
Деталь: | HANDLE FEED LOW |
Парткод: | 302NH06040 |
Деталь: | HOOK FEED LOW |
Парткод: | 302K906670 |
Деталь: | SPRING LID |
Парткод: | 302FZ20021 |
Деталь: | BAND B |
Парткод: | 2BG06480 |
Деталь: | PLATE FEED LOW |
Парткод: | 302NH06020 |
Деталь: | PARTS ROLLER FEED LOW SP |
Парткод: | 302NH94350 |
Деталь: | BUSH 8 |
Парткод: | 28107310 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | SW.PUSH |
Парткод: | 7SP01000006+H01 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 302K994580 |
Деталь: | CONN.CORD ASSY GUIDE FEED LOW |
Парткод: | 302NH46710 |
Деталь: | GUIDE FEED WIRE |
Парткод: | 302NH06010 |
Деталь: | HOLDER SENSOR FEED |
Парткод: | 302NH06290 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210006++H01 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610002++H01 |
Деталь: | GUIDE WIRE FEED LOW |
Парткод: | 302LC06210 |
Деталь: | SPONGE WIRE MPT |
Парткод: | 302H708150 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | BEARING 696ZZNR |
Парткод: | 7BE006155J31H01 |
Деталь: | SPRING HV |
Парткод: | 302K939360 |
Деталь: | PLATE HV |
Парткод: | 302K924620 |
Деталь: | SHAFT DRIVE MIDDLE |
Парткод: | 302N224010 |
Деталь: | BUSH SCREW |
Парткод: | 302H702590 |
Деталь: | BRACKET KEY MIDDLE A |
Парткод: | 302K924660 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | GEAR Z27L Z24L |
Парткод: | 302K924690 |
Деталь: | GEAR Z60R-Z18S |
Парткод: | 302NH24630 |
Деталь: | PARTS ROLLER MIDDLE L SP |
Парткод: | 302LC94551 |
Деталь: | PARTS MOTOR-BL INNER W10 SP |
Парткод: | 302NH94140 |
Деталь: | PLATE EARTH MIDDLE |
Парткод: | 302K924570 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | GEAR Z20S |
Парткод: | 302NH24600 |
Деталь: | GEAR Z18S IDLE |
Парткод: | 302NH24640 |
Деталь: | GEAR Z35R |
Парткод: | 302NH31080 |
Деталь: | SEAL MIDDLE FEED |
Парткод: | 302LF33910 |
Деталь: | COVER MOTOR MIDDLE |
Парткод: | 302NH24040 |
Деталь: | SWITCH REGISTRATION |
Парткод: | 2FG27110 |
Деталь: | HOLDER SENSOR MIDDLE |
Парткод: | 302K924870 |
Деталь: | SENSOR,CONVEYING |
Парткод: | 3H327410 |
Деталь: | HOLDER SENSOR REGIST |
Парткод: | 302K924861 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | FILM FEED UPPER |
Парткод: | 302LF33580 |
Деталь: | SHEET COVER SENSOR |
Парткод: | 302K924890 |
Деталь: | SHEET REGIST L C |
Парткод: | 302K924881 |
Деталь: | SHEET REGIST L A |
Парткод: | 302K924560 |
Деталь: | FRAME MIDDLE FEED |
Парткод: | 302NH24540 |
Деталь: | PLATE MIDDLE FEED |
Парткод: | 302K924542 |
Деталь: | PARTS GUIDE FEED MIDDLE ASSY SP |
Парткод: | 302NH94160 |
Деталь: | Шестерня |
Парткод: | 302KV31091 |
Цена: | 70 ₽ |
Деталь: | Верхний фильтр |
Парткод: | 302N433010 |
Цена: | 5 000 ₽ |
Деталь: | Направляющая подачи бумаги |
Парткод: | 303N024021 |
Деталь: | COVER RIGHT |
Парткод: | 302NH29070 |
Деталь: | LABEL MPF PUSH |
Парткод: | 302NH34550 |
Деталь: | COVER RIGHT UPPER |
Парткод: | 302NH04100 |
Деталь: | LABEL MPF CAUTION B |
Парткод: | 302NH34510 |
Деталь: | COVER INNER |
Парткод: | 302NH04211 |
Деталь: | MAGNET CATCH |
Парткод: | 302LF04130 |
Деталь: | PARTS PWB SWITCH ASSY SP |
Парткод: | 302NG94300 |
Деталь: | KEY POWER |
Парткод: | 302NH04490 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | MAGNET CATCH |
Парткод: | 302K904620 |
Деталь: | SPONGE WIRE MPT |
Парткод: | 302H708150 |
Деталь: | REAR FILM FRAME MID |
Парткод: | 302H733300 |
Деталь: | LID DISPOSAL |
Парткод: | 302NH33080 |
Деталь: | CONN.CORD ASSY TONER DUCT FAN A JOINT |
Парткод: | 302NH46B00 |
Деталь: | COVER FILTER LEFT SIDE |
Парткод: | 302NH33060 |
Деталь: | SHEET EMBLEM 8052CI |
Парткод: | 302NH34010 |
Деталь: | SHEET EMBLEM 7052CI |
Парткод: | 302NH34020 |
Деталь: | COVER REAR UPPER A |
Парткод: | 302NH04140 |
Деталь: | HANDLE REAR COVER |
Парткод: | 302NH04240 |
Деталь: | LID SHIELD BOX |
Парткод: | 302NH39370 |
Деталь: | SHIELD GASKET |
Парткод: | 7ZGSTGPF1100H01 |
Деталь: | LID REAR COVER |
Парткод: | 302NH04570 |
Деталь: | COVER FRONT UPPER B |
Парткод: | 302NH04020 |
Деталь: | COVER REAR UPPER B |
Парткод: | 302NH04150 |
Деталь: | PARTS COVER INNER ASSY SP |
Парткод: | 302NH94071 |
Деталь: | PARTS DISPOSAL UNIT(M3) SP |
Парткод: | 302NH94083 |
Деталь: | FILM RETARD |
Парткод: | 302K908610 |
Деталь: | BASE MPF LOWER |
Парткод: | 302K908021 |
Деталь: | ACTUATOR FEED MPF |
Парткод: | 302K908280 |
Деталь: | SPRING ACTUATOR BYPASS |
Парткод: | 302FZ22870 |
Деталь: | HOLDER RETARD MPF |
Парткод: | 302K908240 |
Деталь: | FELT DUPLEX |
Парткод: | 3H610240 |
Деталь: | SHAFT RETARD MPF B |
Парткод: | 302K908501 |
Деталь: | JOINT RETARD DRIVE |
Парткод: | 302K906180 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | BUSH SCREW |
Парткод: | 302H702590 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | GEAR RETARD MPF Z24L |
Парткод: | 302K908420 |
Деталь: | SHAFT RETARD MPF A |
Парткод: | 302K908491 |
Деталь: | PULLEY,SEPARATION |
Парткод: | 2AR07230 |
Цена: | 360 ₽ |
Деталь: | TORQUE-LIMITER 400 |
Парткод: | 303LL07521 |
Деталь: | SPRING RETARD MPF |
Парткод: | 302K908540 |
Деталь: | COUPLING PRIMARY FEED DRIVE |
Парткод: | 302K906140 |
Деталь: | PULLEY FACE UP |
Парткод: | 302F925160 |
Деталь: | SPRING HOLDER PULLEY |
Парткод: | 302K924770 |
Деталь: | BASE MPF UPPER |
Парткод: | 302K908012 |
Деталь: | HOLDER MIDDLE PULLEY |
Парткод: | 302K908251 |
Деталь: | SPRING MIDDLE |
Парткод: | 302LF08010 |
Деталь: | GEAR Z27R |
Парткод: | 303LL31450 |
Деталь: | ONE WAY CLUTCH /A-49 MPF A4 |
Парткод: | 5AAVCLTCH018 |
Деталь: | PULLEY MIDDLE A |
Парткод: | 302H722760 |
Деталь: | SPRING MIDDLE R |
Парткод: | 302K908700 |
Деталь: | GEAR FEED Z26H |
Парткод: | 302F906030 |
Деталь: | SHAFT PICKUP MPF |
Парткод: | 302K908300 |
Деталь: | GEAR Z30R PICKUP |
Парткод: | 302K908350 |
Деталь: | PARTS GEAR Z30R ONE-WAY SP |
Парткод: | 302K994540 |
Деталь: | PULLEY,PAPER FEED |
Парткод: | 2AR07220 |
Цена: | 1 600 ₽ |
Деталь: | SHAFT FEED MPF A |
Парткод: | 302K908471 |
Деталь: | JOINT DRIVE |
Парткод: | 302FB06151 |
Деталь: | SPRING PICKUP MPF |
Парткод: | 302K908530 |
Деталь: | HOLDER FEED MPF |
Парткод: | 302K908230 |
Деталь: | ACTUATOR PAPER SET |
Парткод: | 302K908290 |
Деталь: | SPRING PAPER SET |
Парткод: | 302K908570 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | MOUNT PI |
Парткод: | 302K908460 |
Деталь: | WIRE MPF |
Парткод: | 302K946370 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | SHAFT FEED MPF B |
Парткод: | 302K908480 |
Деталь: | GUIDE DU LOWER |
Парткод: | 302K908320 |
Деталь: | CASE LIFT MOTOR A |
Парткод: | 302K908261 |
Деталь: | PARTS DC MOTOR ASSY A SP |
Парткод: | 302ND94040 |
Деталь: | PLATE DC MOTOR 6 |
Парткод: | 302K908660 |
Деталь: | GEAR Z46S-Z18S |
Парткод: | 302K908370 |
Деталь: | WORM-WHEEL 36 Z18S |
Парткод: | 302K908360 |
Деталь: | GEAR LIFT Z25S |
Парткод: | 302K908390 |
Деталь: | GEAR LIFT Z64S |
Парткод: | 302K908380 |
Деталь: | LEVER LIFT |
Парткод: | 302K908310 |
Деталь: | GEAR RETARD MPF Z17L |
Парткод: | 302K908410 |
Деталь: | PIN RETARD MPF |
Парткод: | 302K908450 |
Деталь: | FILM DU GUIDE B |
Парткод: | 302K908692 |
Деталь: | COVER CLUTCH |
Парткод: | 302K908270 |
Деталь: | CLUTCH 50 Z35R |
Парткод: | 302NH44090 |
Деталь: | DAMPER MPF B |
Парткод: | 302K908630 |
Деталь: | DAMPER MPF A |
Парткод: | 302K908620 |
Деталь: | SPRING DAMPER |
Парткод: | 302K908640 |
Деталь: | GUIDE MIDDLE MPF |
Парткод: | 302K908440 |
Деталь: | SHEET MPF F |
Парткод: | 302N408010 |
Деталь: | SHEET MPF R |
Парткод: | 302N408020 |
Деталь: | FILM MIDDLE GUIDE |
Парткод: | 302K908590 |
Деталь: | PARTS FILTER FAN ASSY(Z) SP |
Парткод: | 302NH94460 |
Деталь: | COVER DU |
Парткод: | 302NH29050 |
Деталь: | GUIDE COVER DU |
Парткод: | 302K929080 |
Деталь: | PARTS MPT ASSY SP |
Парткод: | 302K994013 |
Деталь: | GEAR Z27R ONEWAY |
Парткод: | 303LL31440 |
Деталь: | HOUSING MAIN DRIVE |
Парткод: | 303NF31011 |
Деталь: | SHAFT CLUTCH CONVEYING A |
Парткод: | 303NF31090 |
Деталь: | CLUTCH 50 Z35R |
Парткод: | 302NH44090 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | BUSH SCREW |
Парткод: | 302H702590 |
Деталь: | SHAFT FEED DRIVE B |
Парткод: | 303NF31110 |
Деталь: | GEAR Z20RD |
Парткод: | 303NF31080 |
Деталь: | COUPLING DRIVE |
Парткод: | 302K931530 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | COUPLING DRIVE |
Парткод: | 303NF31180 |
Деталь: | SPRING DRIVE |
Парткод: | 303NF31170 |
Деталь: | GEAR Z20R |
Парткод: | 303NF31070 |
Деталь: | PLATE EARTH FEED |
Парткод: | 303NF31030 |
Деталь: | PIN FEED DRIVE |
Парткод: | 303NJ31120 |
Деталь: | BRACKET GEAR CHANGE |
Парткод: | 303NJ31031 |
Деталь: | GEAR Z60R |
Парткод: | 303NJ31060 |
Деталь: | GEAR Z40R-Z34L |
Парткод: | 303NJ31140 |
Деталь: | GEAR Z51L Z60L |
Парткод: | 303NF31040 |
Деталь: | GEAR Z36R |
Парткод: | 303NF31160 |
Деталь: | GEAR Z75L-Z32L |
Парткод: | 303NJ31080 |
Деталь: | GEAR Z28R |
Парткод: | 303NJ31130 |
Деталь: | GEAR Z27L MAIN |
Парткод: | 302JZ31170 |
Деталь: | GEAR Z56L-Z40R |
Парткод: | 303NJ31070 |
Деталь: | GEAR Z34L |
Парткод: | 303NF31150 |
Деталь: | PLATE DRIVE L |
Парткод: | 303NF31020 |
Деталь: | PARTS MOTOR-BL W30 SP |
Парткод: | 302K994334 |
Деталь: | GEAR Z35L |
Парткод: | 303NF31050 |
Деталь: | GEAR Z35R |
Парткод: | 303NF31060 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610008++H01 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | PIN FEED DRIVE |
Парткод: | 303NF31130 |
Деталь: | GUIDE WIRE FRONT PWB |
Парткод: | 302LF39050 |
Деталь: | PARTS DRIVE UNIT SP |
Парткод: | 302NH94281 |
Деталь: | PARTS DRIVE SUB UNIT SP |
Парткод: | 303NF94050 |
Деталь: | PARTS TABLET OPERATION SP |
Парткод: | 302RH94070 |
Деталь: | PARTS LCD OPERATION SP |
Парткод: | 302RH94060 |
Деталь: | SPONGE LCDA |
Парткод: | 302RH05210 |
Деталь: | SPONGE LCD B |
Парткод: | 302RH05220 |
Деталь: | SPONGE LCD C |
Парткод: | 302RH05230 |
Деталь: | SPONGE LCD D |
Парткод: | 302RH05240 |
Деталь: | PARTS PWB NFC ASSY SP |
Парткод: | 302RH94050 |
Деталь: | PARTS PWB OPERATION ASSY SP |
Парткод: | 302RH94040 |
Деталь: | PARTS PWB PANEL MAIN ASSY SP |
Парткод: | 302RH94030 |
Деталь: | LABEL OPERATION JP |
Парткод: | 302NH34100 |
Деталь: | LABEL OPERATION EN |
Парткод: | 302NH34110 |
Деталь: | HOLDER WIRE OPERATION |
Парткод: | 302RH05370 |
Деталь: | COVER OPERATION D |
Парткод: | 302RH05360 |
Деталь: | COVER OPERATION REAR A |
Парткод: | 302NH04300 |
Деталь: | PARTS OPERATION UNIT SP |
Парткод: | 302NH94212 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | SW.PUSH |
Парткод: | 7SP01000006+H01 |
Деталь: | PARTS ROLLER RELAY EXIT MIDDLE SP |
Парткод: | 302LF94030 |
Деталь: | PARTS ROLLER RELAY EXIT LOWER B SP |
Парткод: | 302LF94440 |
Деталь: | ACTUATOR RELAY EXIT SW |
Парткод: | 302LF28350 |
Деталь: | STATIC ELIMINATOR,EJECT |
Парткод: | 63212210 |
Деталь: | PARTS SOLENOID FEED SHIFT SP |
Парткод: | 302K994370 |
Деталь: | GEAR Z20R-P18 |
Парткод: | 302LF28420 |
Деталь: | LABEL EXIT A2 |
Парткод: | 302K934160 |
Деталь: | STATIC-ELIMINATOR EJECT |
Парткод: | 302LF28640 |
Деталь: | PULLEY DU LOW |
Парткод: | 302F929260 |
Деталь: | PLATE EARTH EXIT |
Парткод: | 302LF28630 |
Деталь: | SPRING-COMPRESSION RELAY EXIT |
Парткод: | 302LF28840 |
Деталь: | HOUSING RELAY EXIT |
Парткод: | 302LF28223 |
Деталь: | PLATE EARTH ROLLER A |
Парткод: | 302LF28541 |
Деталь: | BEARING MF106ZZ |
Парткод: | 7BE006103R31H01 |
Деталь: | PULLEY P18-S2M |
Парткод: | 302LF28342 |
Деталь: | BELT 150S2M,PAPER FEED |
Парткод: | 3HL07190 |
Деталь: | SPRING-TORSION SWITCHBACK |
Парткод: | 302K928190 |
Деталь: | PARTS GUIDE RELAY EXIT SHEFT SP |
Парткод: | 303NB94190 |
Деталь: | PULLEY MIDDLE |
Парткод: | 302JF22010 |
Деталь: | SHAFT FEED |
Парткод: | 302K324460 |
Деталь: | PLATE EARTH EXIT |
Парткод: | 302LF28531 |
Деталь: | GROUND PLATE SCANNER B |
Парткод: | 2C912690 |
Деталь: | PIN FEED DRIVE |
Парткод: | 303NJ31120 |
Деталь: | BELT S2M-Z112 |
Парткод: | 302LF28450 |
Деталь: | PULLEY TENSION BELT |
Парткод: | 302FZ07150 |
Деталь: | MOUNT RELAY EXIT |
Парткод: | 302LF28250 |
Деталь: | PLATE REINFORCEMENT |
Парткод: | 302NH28300 |
Деталь: | GUIDE RELAY EXIT RIGHT |
Парткод: | 302LF28241 |
Деталь: | SLIDER RELEASE |
Парткод: | 302LF28720 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | SPRING-TORSION RELAY EXIT |
Парткод: | 302LF28810 |
Деталь: | PLATE RELAY SOLENOID |
Парткод: | 302LF28401 |
Деталь: | LEVER RELAY SOLENOID |
Парткод: | 302LF28410 |
Деталь: | SPRING,LF SHIFT GUIDE |
Парткод: | 3HL10090 |
Деталь: | GUIDE RELAY EXIT UPPER |
Парткод: | 302LF28230 |
Деталь: | CAP SPRING /B-11 ENCLOSURE A4 |
Парткод: | 2FM04150 |
Деталь: | SPRING PULLEY |
Парткод: | 302F928170 |
Деталь: | EXIT PUSH |
Парткод: | 302FZ28260 |
Деталь: | SPRING EXIT PUSH |
Парткод: | 302FZ28270 |
Деталь: | PLATE EARTH RELAY B |
Парткод: | 302LF28661 |
Деталь: | COVER RELAY EXIT |
Парткод: | 302NH28030 |
Деталь: | PLATE REINFORCEMENT EXIT |
Парткод: | 302LF28621 |
Деталь: | SPONGE REGIST |
Парткод: | 302N424010 |
Деталь: | PLATE EARTH DU2 |
Парткод: | 302K924920 |
Деталь: | PLATE DC MOTOR 6 |
Парткод: | 302K908660 |
Деталь: | PARTS MOTOR PM FEED SP |
Парткод: | 302K994300 |
Деталь: | BUSH DU EW |
Парткод: | 302K924830 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | SHAFT FEED |
Парткод: | 302K324460 |
Деталь: | CAP SPRING /B-11 ENCLOSURE A4 |
Парткод: | 2FM04150 |
Деталь: | WORM WHEEL Z31S Z33L |
Парткод: | 302K924800 |
Деталь: | GEAR RELEASE Z10R Z83S |
Парткод: | 302K924790 |
Деталь: | PARTS CONV RELEASE MOTOR ASSY SP |
Парткод: | 302LC94190 |
Деталь: | ACTUATOR RELEASE |
Парткод: | 302K921380 |
Деталь: | HOUSING RELEASE DRIVE |
Парткод: | 302K924782 |
Деталь: | SEAL MOTOR DC |
Парткод: | 302LC31511 |
Деталь: | GEAR Z43R |
Парткод: | 302K929740 |
Деталь: | MOUNT PI |
Парткод: | 302K908460 |
Деталь: | SHEET HOLD PI |
Парткод: | 302K924910 |
Деталь: | MOUNT LEVER RELEASE F |
Парткод: | 302K924710 |
Деталь: | MOUNT LEVER RELEASE R |
Парткод: | 302K924720 |
Деталь: | PLATE EARTH RELEASE |
Парткод: | 302K924810 |
Деталь: | BUSH 6 EW |
Парткод: | 302H024370 |
Цена: | 190 ₽ |
Деталь: | CAM RELEASE TRANSFER |
Парткод: | 302K924210 |
Деталь: | HOLDER BUSH REGIST |
Парткод: | 302K924440 |
Деталь: | SPRING REGIST C |
Парткод: | 302H724020 |
Деталь: | BUSH REGIST CENTER |
Парткод: | 302K924430 |
Деталь: | PARTS ROLLER REGIST R SP |
Парткод: | 302K994440 |
Деталь: | BUSH REGIST |
Парткод: | 302K924901 |
Деталь: | SPRING-COMPRESSION REGIST F |
Парткод: | 302K924040 |
Деталь: | SPRING-COMPRESSION REGIST R |
Парткод: | 302K924050 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | BEARING MR106ZZ |
Парткод: | 7BE006103431H01 |
Деталь: | GEAR Z22R |
Парткод: | 302K924060 |
Деталь: | SHEET REGIST R |
Парткод: | 302LF24190 |
Деталь: | LEVER RELEASE TRANSFER |
Парткод: | 302K924140 |
Деталь: | COVER LEVER RELEASE F |
Парткод: | 302K924731 |
Деталь: | COVER LEVER RELEASE R |
Парткод: | 302K924740 |
Деталь: | BUSH 8 |
Парткод: | 28107310 |
Деталь: | SHAFT RELEASE CAM |
Парткод: | 302K924200 |
Деталь: | GEAR RELEASE Z10R |
Парткод: | 302K921180 |
Деталь: | FRAME SECONDLY TRANSFER |
Парткод: | 302LK22020 |
Деталь: | SPRING-COMPRESSION DISCHARGER |
Парткод: | 302K922200 |
Деталь: | PLATE CONTACT DISCHARGER |
Парткод: | 302K922190 |
Деталь: | SPRING EARTH BYPASS F |
Парткод: | 302H707110 |
Деталь: | PLATE EARTH GUIDE TC |
Парткод: | 302K922230 |
Деталь: | HOLDER DISCHARGER |
Парткод: | 302K922120 |
Деталь: | TAPE DISCHARGER |
Парткод: | 302K922280 |
Деталь: | PLATE DISCHARGER |
Парткод: | 302K922130 |
Деталь: | PLATE EARTH TRANSFER |
Парткод: | 302K922240 |
Деталь: | PARTS ROLLER SECONDLY TRANSFER SP |
Парткод: | 302NH94440 |
Деталь: | BEARING 688ZZ |
Парткод: | 7BE008165431H01 |
Деталь: | GEAR Z29R |
Парткод: | 302K922160 |
Деталь: | GUIDE TRANSFER R |
Парткод: | 302K922210 |
Деталь: | VARISTOR TC ASSY |
Парткод: | 302FZ01310 |
Деталь: | PARTS ROLLER DU MID SP |
Парткод: | 302K994480 |
Деталь: | PLATE EARTH DU MIDDLE |
Парткод: | 302K929660 |
Деталь: | BELT S2M A145 |
Парткод: | 302K929310 |
Деталь: | MOUNT MOTOR DU MIDDLE |
Парткод: | 302K929720 |
Деталь: | PULLEY MPT BYPASS |
Парткод: | 302FZ07020 |
Деталь: | POLYSLIDER CUT WASHER 4 |
Парткод: | 302FZ21720 |
Деталь: | SPRING-COMPRESSION COVER DU |
Парткод: | 302K929680 |
Деталь: | SPRING ACT DU |
Парткод: | 302H729120 |
Деталь: | ACTUATOR DU |
Парткод: | 302K929330 |
Деталь: | MOUNT PI |
Парткод: | 302K924841 |
Деталь: | SWITCH,COVER OPEN |
Парткод: | 66127010 |
Деталь: | SPRING HOLDER PULLEY |
Парткод: | 302K924770 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | FRAME DU |
Парткод: | 302K924410 |
Деталь: | SPRING DU |
Парткод: | 302F925780 |
Деталь: | PULLEY MIDDLE A |
Парткод: | 302H722760 |
Деталь: | PARTS ROLLER DU LOW SP |
Парткод: | 302K994470 |
Деталь: | SPRING DU |
Парткод: | 302K929770 |
Деталь: | PULLEY 26 DU |
Парткод: | 302H029110 |
Деталь: | CUT-WASHER 6 |
Парткод: | 302K921420 |
Деталь: | SPRING EARTH CONVEYING |
Парткод: | 302LF22600 |
Деталь: | BASE CONVEYING |
Парткод: | 302K924011 |
Деталь: | SPRING-TORSION DISCHARGER |
Парткод: | 302K924270 |
Деталь: | PLATE CONTACT HV |
Парткод: | 302K924290 |
Деталь: | SPRING CONTACT DISCHARGER |
Парткод: | 302K924280 |
Деталь: | PLATE EARTH REGIST |
Парткод: | 302K924250 |
Деталь: | RETAINER LOOP SENSOR |
Парткод: | 302K924100 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 302LC94410 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | PARTS GUIDE CONVEYING UNIT SP |
Парткод: | 302NH94430 |
Деталь: | SPRING-COMPRESSION TRANSFER F |
Парткод: | 302NH24010 |
Деталь: | PARTS CONVEYING UNIT (M) SP |
Парткод: | 302NH94060 |
Деталь: | GEAR GUIDE SIDE |
Парткод: | 302BM07410 |
Деталь: | RACK CURSOR |
Парткод: | 302K909060 |
Деталь: | PARTS GEAR CURSOR SP |
Парткод: | 302K994550 |
Деталь: | ACTUATOR PAPER LEVEL DETECTION |
Парткод: | 302K909270 |
Деталь: | LABEL PAPER SIZE A |
Парткод: | 302NH34710 |
Деталь: | LABEL PAPER SIZE B |
Парткод: | 302NH34720 |
Деталь: | LIFT LOCK |
Парткод: | 302GR09991 |
Деталь: | LABEL CASSETTE PAPER MAX |
Парткод: | 302NH34730 |
Деталь: | LABEL CASSETTE CURSOR LOCK |
Парткод: | 302K934100 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | CASSETTE BASE |
Парткод: | 302NH09010 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | ARM SIZE DETECTION |
Парткод: | 302N209030 |
Деталь: | LABEL CASSETTE OPERATION |
Парткод: | 302NH34700 |
Деталь: | SPRING CASSETTE EARTH |
Парткод: | 302N209040 |
Деталь: | PLATE WORK |
Парткод: | 302K909090 |
Деталь: | SHAFT WORK PLATE |
Парткод: | 302K909190 |
Деталь: | CAP TURN PLATE |
Парткод: | 302K909140 |
Деталь: | SPRING PICK UP |
Парткод: | 302K906260 |
Деталь: | LEVER SIDE SW |
Парткод: | 302NH09250 |
Деталь: | SPRING ROTATION |
Парткод: | 302NH25890 |
Деталь: | CAM CURSOR RAIL |
Парткод: | 302NH09100 |
Деталь: | CURSOR REAR |
Парткод: | 302NH09040 |
Деталь: | RAIL CURSOR |
Парткод: | 302NH09020 |
Деталь: | LEVER CURSOR LOCK REAR |
Парткод: | 302K909121 |
Деталь: | LOCK REAR CURSOR |
Парткод: | 302NH09150 |
Деталь: | SHAFT CURSOR GEAR |
Парткод: | 302NH09130 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | CURSOR FRONT |
Парткод: | 302NH09030 |
Деталь: | PLATE PAPER BOTTOM |
Парткод: | 302K909082 |
Деталь: | CUSHION BOTTOM PLATE |
Парткод: | 302N209050 |
Деталь: | PAD BOTTOM |
Парткод: | 302K909261 |
Деталь: | SPRING CURSOR SET |
Парткод: | 302NT09060 |
Деталь: | LABEL PAPER SIZE 18 |
Парткод: | 302NH34340 |
Деталь: | SPRING FIX |
Парткод: | 302HN09190 |
Деталь: | SIZE FIX |
Парткод: | 302HN09240 |
Деталь: | STOPPER SIZE SET |
Парткод: | 302K309350 |
Деталь: | CURSOR END |
Парткод: | 302NH09070 |
Деталь: | COVER CURSOR F |
Парткод: | 302ND09050 |
Деталь: | LEVER CURSOR F |
Парткод: | 302ND09060 |
Деталь: | SPRING RELEASE CURSOR |
Парткод: | 302ND09070 |
Деталь: | RACK CURSOR F |
Парткод: | 302ND09080 |
Деталь: | LEVER CURSOR SET |
Парткод: | 302ND09130 |
Деталь: | LEVER CASSETTE SET |
Парткод: | 302ND09240 |
Деталь: | SPRING CASSETTE SET |
Парткод: | 302ND09250 |
Деталь: | SPRING CURSOR RACK |
Парткод: | 302ND09320 |
Деталь: | CURSOR END RACK R |
Парткод: | 302ND09330 |
Деталь: | CURSOR END RACK L |
Парткод: | 302ND09340 |
Деталь: | SPRING SIZE FIX E |
Парткод: | 302ND09350 |
Деталь: | REINFORCEMENT HANDLE |
Парткод: | 302ND09450 |
Деталь: | LABEL PAPER SIZE D |
Парткод: | 302ND34090 |
Деталь: | CURSOR END SUB |
Парткод: | 302NH09060 |
Деталь: | PLATE CURSOR |
Парткод: | 302NH09360 |
Деталь: | LABEL CASSETTE CURSOR OPERATION |
Парткод: | 302NH34750 |
Деталь: | COVER CASSETTE |
Парткод: | 302NH04180 |
Деталь: | HANDLE CASSETTE |
Парткод: | 302ND09390 |
Цена: | 650 ₽ |
Деталь: | CT-8720 |
Парткод: | 302NH93011 |
Деталь: | PARTS ROLLER CONVEYING LEFT SP |
Парткод: | 303M494090 |
Деталь: | PARTS ROLLER CONVEYING RIGHT SP |
Парткод: | 303M494100 |
Деталь: | PARTS FAN COOLING CONV |
Парткод: | 302H794490 |
Деталь: | GUIDE READING |
Парткод: | 303M424251 |
Деталь: | PULLEY GUIDE READING |
Парткод: | 303LL24190 |
Деталь: | SHEET LEFT READING |
Парткод: | 303M424200 |
Деталь: | GUIDE LEFT READING |
Парткод: | 303M424210 |
Деталь: | SPRING BYPASSFFED |
Парткод: | 302H008140 |
Деталь: | SPRING PICK UP |
Парткод: | 303NA06110 |
Деталь: | SPONGE ORIGINAL MAT A |
Парткод: | 303R702180 |
Деталь: | GUIDE RIGHT READING |
Парткод: | 303M824160 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 303NW94040 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | PARTS ROLLER REGISTRATION SP |
Парткод: | 303M494070 |
Деталь: | GEAR Z26 |
Парткод: | 303M431110 |
Деталь: | PARTS ROLLER CONVEYING UPPER SP |
Парткод: | 303M494080 |
Деталь: | GEAR 22 CIS IDLE |
Парткод: | 303M431340 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | PULLEY,TIMING BELT |
Парткод: | 28801190 |
Деталь: | CUSHION ORIGINAL MAT |
Парткод: | 303J902371 |
Деталь: | PULLEY 38 CONVEYING |
Парткод: | 303LL31330 |
Деталь: | PULLEY CONVEYING BK |
Парткод: | 303M824210 |
Деталь: | PULLEY 48 CONV HIGH |
Парткод: | 303M431320 |
Деталь: | BEARING 688ZZ |
Парткод: | 7BE008165431H01 |
Деталь: | FAN COOLING 40-15 |
Парткод: | 302H044120 |
Деталь: | ACCESS.BUSHING |
Парткод: | 7YZM110001++H01 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210005++H01 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210006++H01 |
Деталь: | BUSH 8 |
Парткод: | 28107310 |
Деталь: | SPRING SIDE COVER |
Парткод: | 302HN04250 |
Деталь: | SPRING CURSOR SET |
Парткод: | 302K309370 |
Деталь: | HOLDER BEARING 688ZZ |
Парткод: | 302K931960 |
Деталь: | SPRING PUSH MAT |
Парткод: | 303LL02430 |
Деталь: | SPRING TENSION CONV |
Парткод: | 303LL31390 |
Деталь: | PLATE TENSION EJECT |
Парткод: | 303LL31520 |
Деталь: | MOUNT TIMING SW |
Парткод: | 303M402100 |
Деталь: | GUIDE CONV RIGHT |
Парткод: | 303M424170 |
Деталь: | STAY CONV RIGHT |
Парткод: | 303M424180 |
Деталь: | HOLDER LEFT PULLEY |
Парткод: | 303M424190 |
Деталь: | GUIDE CONV LEFT |
Парткод: | 303M424221 |
Деталь: | HOLDER READ PULLEY |
Парткод: | 303M424261 |
Деталь: | GUIDE CONVEYING LOW |
Парткод: | 303M424270 |
Деталь: | PLATE EARTH CONV LOWER |
Парткод: | 303M424280 |
Деталь: | BELT 60S1.5M326 |
Парткод: | 303M431270 |
Деталь: | KNOB JAM REMOVEMENT |
Парткод: | 303M431280 |
Деталь: | HOLDER RIGHT PULLEY |
Парткод: | 303M824121 |
Деталь: | SHAFT GUIDE READING |
Парткод: | 303M824130 |
Деталь: | SPRING GUIDE READING |
Парткод: | 303M824140 |
Деталь: | SHAFT PULLEY |
Парткод: | 303M824200 |
Деталь: | MOUNT CUSHION |
Парткод: | 303LL02410 |
Деталь: | CUSHION ORIGINAL MAT |
Парткод: | 303LL02531 |
Деталь: | HOLDER FAN |
Парткод: | 303M402111 |
Деталь: | GUIDE REGIST LOWER |
Парткод: | 303M424060 |
Деталь: | STAY CONVEYING |
Парткод: | 303M402060 |
Деталь: | SHEET GUIDE CONV LEFT |
Парткод: | 303M424440 |
Деталь: | PIN,HOOK FULCRUM |
Парткод: | 3CZ02230 |
Деталь: | SPACER CUSHION |
Парткод: | 303R802020 |
Деталь: | PARTS IMAGE SCANNER ASSY SP |
Парткод: | 302NH93230 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 302ND94800 |
Деталь: | PARTS MOUNT LED ASSY SP |
Парткод: | 302V693080 |
Деталь: | PARTS CONTACT-GLASS ASSY(C) SP |
Парткод: | 302NH94420 |
Деталь: | PARTS CONTACT-GLASS ASSY(I) SP |
Парткод: | 302NH94410 |
Деталь: | COVER ISU FRONT |
Парткод: | 302NH04430 |
Деталь: | COVER ISU LEFT |
Парткод: | 302NH04510 |
Деталь: | COVER ISU RIGHT |
Парткод: | 302NH04520 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1S173LCH01 |
Деталь: | GUIDE WIRE ISU |
Парткод: | 302NH17380 |
Деталь: | MOUNT DP HINGE |
Парткод: | 302N217010 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | WIRE SCANNER FRONT |
Парткод: | 302H717381 |
Деталь: | WIRE SCANNER REAR |
Парткод: | 302H717391 |
Деталь: | MIRROR B |
Парткод: | 302GR17281 |
Деталь: | MIRROR HOLDER |
Парткод: | 75712080 |
Деталь: | GUIDE FFC LED B |
Парткод: | 302K317160 |
Деталь: | SPRING SCANNER TENSION |
Парткод: | 302C912291 |
Деталь: | MIRROR A |
Парткод: | 302KK17320 |
Деталь: | SPRING,MIRROR HOLDER |
Парткод: | 2BC12190 |
Деталь: | GUIDE FFC LED |
Парткод: | 302V617080 |
Деталь: | SWITCH RELEASE |
Парткод: | 302K917120 |
Деталь: | SPRING RELEASE SWITCH |
Парткод: | 302GR17380 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610003++H01 |
Деталь: | SPONGE WIRE |
Парткод: | 302K319080 |
Деталь: | GUIDE WIRE FRONT PWB |
Парткод: | 302LF39050 |
Деталь: | FERRITE CORE |
Парткод: | 7YBFG050K002H01 |
Деталь: | MOUNT PI |
Парткод: | 302K317330 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | COVER ISU |
Парткод: | 302NH17400 |
Деталь: | SHIELD GASKET |
Парткод: | 7ZGSTGZ10022H01 |
Деталь: | SHIELD GASKET |
Парткод: | 7ZG65TSV+010H02 |
Деталь: | SEAL FRAME SIDE B |
Парткод: | 302H717440 |
Деталь: | FILM FRAME |
Парткод: | 302K317660 |
Деталь: | SEAL FRAME ISU C |
Парткод: | 302K317650 |
Деталь: | SEAL FRAME ISU A |
Парткод: | 302K317450 |
Деталь: | SEAL FRAME ISU B |
Парткод: | 302K317460 |
Деталь: | FILM FRAME SIDE F |
Парткод: | 302K917170 |
Деталь: | FILM FRAME SIDE R |
Парткод: | 302K917180 |
Деталь: | CAP PULLEY ISU |
Парткод: | 302K917240 |
Деталь: | PIN SCANNER RETAINING |
Парткод: | 302GR17180 |
Деталь: | GUIDE WIRE USB B |
Парткод: | 302NH39390 |
Деталь: | GUIDE WIRE OPERATION |
Парткод: | 302LC05350 |
Деталь: | PIN ISU FRONT |
Парткод: | 302N404410 |
Деталь: | PARTS MOTOR ISU SP |
Парткод: | 302N294010 |
Деталь: | BELT 97ST1.5-6.0 |
Парткод: | 303M431120 |
Деталь: | PULLEY ISU Z59 |
Парткод: | 302K917021 |
Деталь: | CURSOR REAR |
Парткод: | 303R806020 |
Деталь: | RACK TABLE |
Парткод: | 303M406031 |
Деталь: | CUSHION CURSOR |
Парткод: | 3HL06090 |
Деталь: | TERMINAL PAPER SIZE |
Парткод: | 3HL06110 |
Деталь: | LABEL ORIGINAL MAX |
Парткод: | 303R834030 |
Деталь: | CURSOR FRONT |
Парткод: | 303R806010 |
Деталь: | PINION GEAR |
Парткод: | 303JX06070 |
Деталь: | COVER CURSOR |
Парткод: | 303R806040 |
Деталь: | SENSOR EARTH |
Парткод: | 303JX06090 |
Деталь: | TABLE LIFT |
Парткод: | 303R806050 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 303NW94060 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | PARTS PWB SIZE DETECTION ASSY SP |
Парткод: | 303M894271 |
Деталь: | PAD,LIFT |
Парткод: | 3A707290 |
Деталь: | BASE TABLE |
Парткод: | 303R806030 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | COVER TABLE REAR |
Парткод: | 303M406130 |
Деталь: | GEAR LIFT Z30 |
Парткод: | 303M406070 |
Деталь: | COVER TABLE |
Парткод: | 303R806060 |
Деталь: | BUSH TABLE |
Парткод: | 303M406080 |
Деталь: | MOUNT ORIGINAL SENSOR |
Парткод: | 303LL06090 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 303NW94050 |
Деталь: | LABEL FACE UP JP |
Парткод: | 303R834040 |
Деталь: | LABEL FACE UP EN |
Парткод: | 303R834050 |
Деталь: | LABEL CAUTION JP |
Парткод: | 303R834070 |
Деталь: | LABEL CAUTION IN |
Парткод: | 303R834090 |
Деталь: | LABEL CAUTION ME |
Парткод: | 303R834100 |
Деталь: | FILM WIRE OPE |
Парткод: | 302H702540 |
Деталь: | SPRING DRUM JOINT |
Парткод: | 302H712650 |
Деталь: | PIN TABLE |
Парткод: | 303M402210 |
Деталь: | LEVER LIFT |
Парткод: | 303M406050 |
Деталь: | SHAFT LIFT |
Парткод: | 303M406060 |
Деталь: | LABEL FACE UP US |
Парткод: | 303R834060 |
Деталь: | LABEL FACE UP NL |
Парткод: | 303R834130 |
Деталь: | LABEL CAUTION US |
Парткод: | 303R834080 |
Деталь: | LABEL CAUTION NL |
Парткод: | 303R834120 |
Деталь: | PARTS MOTOR-BL W20 SP |
Парткод: | 302K994324 |
Деталь: | PARTS MOUNT PRE BELT CLN SP |
Парткод: | 302NH94240 |
Деталь: | TR-8720 |
Парткод: | 302NH93142 |
Деталь: | HOLDER FEED DRIVE |
Парткод: | 302NH31410 |
Деталь: | COUPLING DRIVE |
Парткод: | 302K931530 |
Деталь: | BUSH SCREW |
Парткод: | 302H702590 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | SHAFT FEED DRIVE |
Парткод: | 302K931431 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | CLUTCH 50 Z35R |
Парткод: | 302NH44090 |
Деталь: | PIN FEED DRIVE |
Парткод: | 302NH31100 |
Деталь: | GEAR Z28R |
Парткод: | 302K931500 |
Деталь: | PLATE FEED DRIVE |
Парткод: | 302NH31420 |
Деталь: | ACCESS.SADDLE |
Парткод: | 7YZM610007++H01 |
Деталь: | SHAFT FEED |
Парткод: | 302NH31440 |
Деталь: | GEAR Z61R-Z35R |
Парткод: | 302NH31490 |
Деталь: | GEAR Z64R |
Парткод: | 302NH31510 |
Деталь: | COUPLING DRIVE |
Парткод: | 302NH31530 |
Деталь: | PLATE EARTH FEED |
Парткод: | 302NH31540 |
Деталь: | GEAR Z35R |
Парткод: | 302NH31550 |
Деталь: | PARTS MOTOR-BL INNER W10 SP |
Парткод: | 302NH94140 |
Деталь: | BUSH 8 |
Парткод: | 302H024830 |
Деталь: | GEAR Z40L-Z34L |
Парткод: | 302K931520 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610001++H01 |
Деталь: | HOLDER CONT DRIVE K |
Парткод: | 302K931710 |
Деталь: | PARTS DC MOTOR ASSY B SP |
Парткод: | 302K994D00 |
Деталь: | SEAL MOTOR DC |
Парткод: | 302LC31511 |
Деталь: | PLATE DC MOTOR 10 |
Парткод: | 302K902610 |
Деталь: | WORM WHEEL Z56L-Z20S |
Парткод: | 302K931760 |
Деталь: | SHAFT CONT DRIVE |
Парткод: | 302K931780 |
Деталь: | GEAR Z34S JOINT |
Парткод: | 302K931830 |
Деталь: | PLATE CONT DRIVE |
Парткод: | 302K931721 |
Деталь: | CUT WASHER 4 |
Парткод: | 2BG22990 |
Деталь: | SPRING PADDLE CONT D |
Парткод: | 302H731650 |
Деталь: | COUPLING CONT D |
Парткод: | 302H731640 |
Деталь: | HOLDER CONT DRIVE C |
Парткод: | 302K931740 |
Деталь: | PARTS CONV RELEASE MOTOR ASSY SP |
Парткод: | 302LC94190 |
Деталь: | PLATE DC MOTOR 6 |
Парткод: | 302K908660 |
Деталь: | WORM WHEEL Z40L-Z20S |
Парткод: | 302K931810 |
Деталь: | FEED DRIVE H UNIT |
Парткод: | 302NH93210 |
Деталь: | PARTS CONT DRIVE UNIT K SP |
Парткод: | 302K994670 |
Деталь: | PARTS CONT DRIVE UNIT COL SP |
Парткод: | 302K994680 |
Деталь: | PARTS CIS HIGH SP |
Парткод: | 303R894010 |
Деталь: | GLASS CIS |
Парткод: | 303NW24020 |
Деталь: | GEAR Z42 FEED |
Парткод: | 2BL06170 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 303NW94040 |
Деталь: | PARTS PWB SHD ASSY SP |
Парткод: | 303R894020 |
Деталь: | ACCESS.SPACER |
Парткод: | 7YZM510019++H01 |
Деталь: | WIRE INTERFACE VIDEO |
Парткод: | 303R846020 |
Деталь: | PULLEY REGISTRATION BK |
Парткод: | 303M424300 |
Деталь: | PULLEY REG B BK |
Парткод: | 303M424310 |
Деталь: | GEAR JOINT MPT UNIT |
Парткод: | 302FZ08370 |
Деталь: | GEAR IDLE Z14S |
Парткод: | 2CK17050 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | PARTS ROLLER CIS SP |
Парткод: | 303M494060 |
Деталь: | HANDLE COVER PF |
Парткод: | 303R804040 |
Деталь: | COVER PF |
Парткод: | 303R804051 |
Деталь: | COVER PF BOTTOM |
Парткод: | 303R804100 |
Деталь: | LABEL SIZE INDICATOR |
Парткод: | 303R834020 |
Деталь: | PULLY CIS ROLLER |
Парткод: | 303M424400 |
Деталь: | CUT WASHER 4 |
Парткод: | 302FB09830 |
Деталь: | SPRING CONVEYING |
Парткод: | 303H316360 |
Деталь: | SHAFT REGISTRATION PULLEY |
Парткод: | 303LL07130 |
Деталь: | SPRING REGISTRATION |
Парткод: | 303LL07170 |
Деталь: | SPACER CIS |
Парткод: | 303NW24050 |
Деталь: | GUIDE REGIST UPPER |
Парткод: | 303M407260 |
Деталь: | ARM CIS ROLLER FRONT |
Парткод: | 303M407270 |
Деталь: | GUIDE CIS ROLLER |
Парткод: | 303M407291 |
Деталь: | LEVER HANDLE |
Парткод: | 303M407310 |
Деталь: | PLATE EARTH CIS ROLLER |
Парткод: | 303M407330 |
Деталь: | PLATE PF COVER FRONT |
Парткод: | 303M407340 |
Деталь: | PLATE PF COVER REAR |
Парткод: | 303M407350 |
Деталь: | SHAFT CIS IDLE |
Парткод: | 303M407360 |
Деталь: | HOLDER REGIST PULLEY |
Парткод: | 303M407370 |
Деталь: | SHEET CIS ROLLER |
Парткод: | 303M407410 |
Деталь: | COVER PF FRONT |
Парткод: | 303M407510 |
Деталь: | PLATE EARTH CIS REAR |
Парткод: | 303R824020 |
Деталь: | HOLDER GEAR |
Парткод: | 303M407530 |
Деталь: | MOUNT CIS SW |
Парткод: | 303M424130 |
Деталь: | SHAFT CIS IDLE |
Парткод: | 303M424240 |
Деталь: | PLATE EARTH SHD PWB |
Парткод: | 303M424290 |
Деталь: | SHAFT CIS PULLEY |
Парткод: | 303M424340 |
Деталь: | HOLDER CIS PULLEY |
Парткод: | 303M424350 |
Деталь: | SPRING CIS PULLEY |
Парткод: | 303M424420 |
Деталь: | HOUSING CIS |
Парткод: | 303NW24012 |
Деталь: | STOPPER CIS GLASS |
Парткод: | 303NW24030 |
Деталь: | PLATE EARTH CIS FRONT |
Парткод: | 303R824010 |
Деталь: | PIN PF COVER |
Парткод: | 303LL02190 |
Деталь: | STRAP PF COVER |
Парткод: | 303M407380 |
Деталь: | SHEET CIS GLASS |
Парткод: | 303P624020 |
Деталь: | DP UNIT SP |
Парткод: | 302NH93161 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | CUT-WASHER 4 |
Парткод: | 302K924820 |
Цена: | 160 ₽ |
Деталь: | HOLDER SENSOR FEED |
Парткод: | 302K906290 |
Деталь: | PLATE FRAME LOWER |
Парткод: | 302NH06080 |
Деталь: | SHAFT FEED LOW |
Парткод: | 302NH06980 |
Деталь: | PULLEY RETARD |
Парткод: | 302N406040 |
Цена: | 450 ₽ |
Деталь: | LEVER RETARD LOCK |
Парткод: | 302N406160 |
Деталь: | PLATE RETARD ADJUST |
Парткод: | 302K906420 |
Деталь: | SPONGE WIRE MPT |
Парткод: | 302H708150 |
Деталь: | HOLDER PULLEY |
Парткод: | 302K906700 |
Деталь: | PULLEY DU LOW |
Парткод: | 302F929260 |
Деталь: | SHAFT ASSIST PULLEY |
Парткод: | 302NH06990 |
Деталь: | HOLDER RETARD |
Парткод: | 302NH06070 |
Деталь: | HOLDER PRIM FEED PULLEY |
Парткод: | 302K906280 |
Деталь: | LOWER BUSHING,PAPER FEED |
Парткод: | 34806040 |
Деталь: | TORQUE-LIMITER 390 |
Парткод: | 302K906750 |
Деталь: | PLATE RETARD HOLDER |
Парткод: | 302NH06090 |
Деталь: | FULCRUM-PIN RETARD |
Парткод: | 302N406150 |
Деталь: | LEVER RETARD RELEASE |
Парткод: | 302N406130 |
Деталь: | SPRING RETARD |
Парткод: | 302NH06100 |
Деталь: | SHEET PRIMARY FEED HI |
Парткод: | 302K906721 |
Деталь: | GUIDE FRONT LOWER |
Парткод: | 302N406060 |
Деталь: | SPRING RETARD LOCK |
Парткод: | 302N406140 |
Деталь: | PLATE PRIMARY FEED DRIVE |
Парткод: | 302K906111 |
Деталь: | MOUNT PRIMARY FEED R |
Парткод: | 302K906270 |
Деталь: | SHAFT PICKUP PRIMARY |
Парткод: | 302N406070 |
Деталь: | ONEWAY-CLUTCH 6 |
Парткод: | 302N406120 |
Деталь: | SPRING PICK UP |
Парткод: | 302K906260 |
Деталь: | GEAR Z28 FEED |
Парткод: | 302N406170 |
Деталь: | PULLEY FEED |
Парткод: | 302N406030 |
Цена: | 440 ₽ |
Деталь: | GEAR Z32 FEED OW |
Парткод: | 302N406100 |
Деталь: | GEAR Z32 PICKUP |
Парткод: | 302N406110 |
Деталь: | PLATE FRAME UPPER |
Парткод: | 302N406010 |
Деталь: | ACTUATOR PAPER EMPTY |
Парткод: | 302K906321 |
Деталь: | HOLDER PICKUP |
Парткод: | 302N406050 |
Деталь: | SHEET SOLENOID |
Парткод: | 303NF06350 |
Деталь: | PIN PICK UP IDLE |
Парткод: | 302K906080 |
Деталь: | PARTS SENSOR OPT. SP |
Парткод: | 302K994580 |
Деталь: | PARTS SENSOR OPT SP |
Парткод: | 303M894260 |
Деталь: | GUIDE PRIM FEED WIRE |
Парткод: | 302K906250 |
Деталь: | SPRING DU |
Парткод: | 302F925780 |
Деталь: | MOUNT PRIMARY FEED |
Парткод: | 302K906100 |
Деталь: | PARTS PRIMARY FEED UNIT DECK SP |
Парткод: | 302NH94250 |
Деталь: | PARTS PULLEY SET SP |
Парткод: | 302N494230 |
Цена: | 1 800 ₽ |
Деталь: | LK-8720 |
Парткод: | 302NH93131 |
Деталь: | PIN LSU RETAINING |
Парткод: | 302K902470 |
Деталь: | LSU RETAINER FRAME ASSY |
Парткод: | 302K900021 |
Деталь: | SHEET LSU FRAME |
Парткод: | 302K019140 |
Деталь: | HOLDER LSU REAR |
Парткод: | 302K902460 |
Деталь: | SHAFT GLASS CLN |
Парткод: | 302K902490 |
Деталь: | HOLDER LSU FRONT |
Парткод: | 302K902380 |
Деталь: | SPRING-COMPRESSION LSU RETAINING |
Парткод: | 302K902480 |
Деталь: | MOUNT LSU PWB |
Парткод: | 302K902370 |
Деталь: | COVER LSU PWB |
Парткод: | 302K902511 |
Деталь: | PARTS PWB LSU JUNCTION CLR ASSY SP |
Парткод: | 302NH94340 |
Деталь: | PIN LSU RETAINER |
Парткод: | 302K902410 |
Деталь: | SPRING LSU |
Парткод: | 302FZ20040 |
Деталь: | GUIDE LSU PIN |
Парткод: | 302K902910 |
Деталь: | PIN FUSER COVER |
Парткод: | 2FB20860 |
Деталь: | BASE RUBBER,FRAME |
Парткод: | 3CG02030 |
Деталь: | MOUNT LSU LID |
Парткод: | 302K902550 |
Деталь: | HOLDER MOTOR |
Парткод: | 302K902A00 |
Деталь: | PLATE DC MOTOR 10 |
Парткод: | 302K902610 |
Деталь: | SHIELD BOX |
Парткод: | 302NH39010 |
Деталь: | RAIL PWB |
Парткод: | 302K939030 |
Деталь: | PARTS SPEAKER SP |
Парткод: | 302ND94790 |
Деталь: | BRACKET MAIN |
Парткод: | 302NH39020 |
Деталь: | ACCESS.CLAMP |
Парткод: | 7YZM390011++H01 |
Деталь: | PARTS PWB MAIN ASSY SP |
Парткод: | 302NH94050 |
Деталь: | PARTS PWB MAIN ASSY EU SP |
Парткод: | 302NH94090 |
Деталь: | HOLDER FAN MAIN |
Парткод: | 302NH39030 |
Деталь: | FAN BOX COOLING |
Парткод: | 302FZ44040 |
Деталь: | ACCESS SADDLE |
Парткод: | 7YZM610002++H01 |
Деталь: | PLATE OPTION |
Парткод: | 302RH39220 |
Деталь: | PLATE SHIELD BOX |
Парткод: | 302K939080 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210011++H01 |
Деталь: | PARTS STORAGE DEVICE SP |
Парткод: | 302NH93190 |
Деталь: | MOUNT USB PWB |
Парткод: | 302NH39400 |
Деталь: | MOUNT DRAWER B |
Парткод: | 302K924381 |
Деталь: | SPRING DRAWER |
Парткод: | 302K924360 |
Деталь: | HOLDER ATTACHMENT |
Парткод: | 302K931210 |
Деталь: | BUSHING FAN |
Парткод: | 302JD19140 |
Деталь: | PARTS WIFI UNIT SP |
Парткод: | 303RR94010 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210003++H01 |
Деталь: | PARTS PWB USB HUB ASSY SP |
Парткод: | 302RH94020 |
Деталь: | PARTS PWB ENGINE ASSY SP |
Парткод: | 302NH94100 |
Деталь: | PARTS PWB FRONT CLR ASSY SP |
Парткод: | 302NH94110 |
Деталь: | PARTS PWB DPIF ASSY SP |
Парткод: | 303R894050 |
Деталь: | PARTS SSD SP |
Парткод: | 302ND94670 |
Деталь: | PLATE NUT M3 |
Парткод: | 302MN04151 |
Деталь: | TONER EMPTY DETECTION SENSOR |
Парткод: | 3033915181 |
Деталь: | SHUTTER HOPPER UP |
Парткод: | 302K915460 |
Деталь: | BUSHING,TRANSFER |
Парткод: | 2A116180 |
Деталь: | BUSH SCREW |
Парткод: | 302K915450 |
Деталь: | GEAR Z21S-Z15S |
Парткод: | 302K915160 |
Деталь: | GEAR Z32R-Z14S |
Парткод: | 302K915210 |
Деталь: | GEAR Z21S |
Парткод: | 302K915200 |
Деталь: | GEAR Z48L |
Парткод: | 302K915190 |
Деталь: | MOUNT PI |
Парткод: | 302K921410 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | SEAL MOTOR DC |
Парткод: | 302LC31511 |
Деталь: | PLATE DC MOTOR 6 |
Парткод: | 302K908660 |
Деталь: | HOLDER MOTOR |
Парткод: | 302K915130 |
Деталь: | GEAR Z60S |
Парткод: | 302K915170 |
Деталь: | PARTS FAN COOLING LSU 60 SP |
Парткод: | 302LC94380 |
Деталь: | SCREW FAN |
Парткод: | 302H733430 |
Деталь: | MOUNT DRAWER A |
Парткод: | 302K924341 |
Деталь: | PIN DRAWER |
Парткод: | 302K924350 |
Деталь: | SPRING DRAWER |
Парткод: | 302K924360 |
Деталь: | MOUNT DRAWER B |
Парткод: | 302K924381 |
Деталь: | PARTS DC MOTOR ASSY SP |
Парткод: | 303PX94010 |
Деталь: | BEARING 6800ZZ(7MM) |
Парткод: | 7BE010197431H01 |
Деталь: | HOLDER WIRE D |
Парткод: | 303LL02330 |
Деталь: | FERRITE CORE |
Парткод: | 7YBEJ0J0D002H01 |
Деталь: | CONN.CORD ASSY DLP FAN |
Парткод: | 302NH46A40 |
Деталь: | SHEET DU GUIDE LOWER |
Парткод: | 302LH29050 |
Деталь: | PARTS CLN WT MOTOR ASSY (M) SP |
Парткод: | 302K994B11 |
Деталь: | PARTS INNER UNIT SP |
Парткод: | 302NH94201 |
Деталь: | PARTS HOLDER MOTOR ASSY SP |
Парткод: | 302NH94520 |
Деталь: | PARTS PWB JOB SEPA ASSY SP |
Парткод: | 302K994600 |
Деталь: | LABEL JOB SEPARATOR |
Парткод: | 302K934190 |
Деталь: | PARTS MOTOR PM FEED SP |
Парткод: | 302K994300 |
Деталь: | PARTS ROLLER EXIT RIGHT SP |
Парткод: | 303NM94010 |
Деталь: | TRAY EXIT A |
Парткод: | 302NH16010 |
Деталь: | TRAY EXIT B |
Парткод: | 302NH16020 |
Деталь: | TRAY EXIT C |
Парткод: | 302NH16030 |
Деталь: | GEAR Z46R Z21S IDLE |
Парткод: | 303NM16130 |
Деталь: | GEAR Z15S |
Парткод: | 303NM16140 |
Деталь: | TRAY EXIT D |
Парткод: | 302NH16040 |
Деталь: | ACTUATOR EXIT |
Парткод: | 303NM16280 |
Деталь: | PARTS SOLENOID JS SP |
Парткод: | 303NM94020 |
Деталь: | BUSH 6 |
Парткод: | 302K324450 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | STATIC ELIMINATOR,EJECT |
Парткод: | 63212210 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | FRAME EXIT |
Парткод: | 303NM16010 |
Деталь: | PULLEY MPT BYPASS |
Парткод: | 302FZ07020 |
Деталь: | SPRING PULLEY JS |
Парткод: | 303MA16290 |
Деталь: | SPRING-TORSION GUIDE F |
Парткод: | 303NM16170 |
Деталь: | SPRING-TORSION GUIDE R |
Парткод: | 303NM16180 |
Деталь: | SPRING EARTH A |
Парткод: | 303NM16190 |
Деталь: | SPRING EARTH B |
Парткод: | 303NM16240 |
Деталь: | GUIDE EXIT B |
Парткод: | 303NM16030 |
Деталь: | PLATE GUIDE LOWER |
Парткод: | 303NM16250 |
Деталь: | SPRING-EXTENSION |
Парткод: | 303NM16210 |
Деталь: | STUD SCREW M3 |
Парткод: | 302F325010 |
Деталь: | ARM FEED SHIFT |
Парткод: | 303NM16200 |
Деталь: | PLATE EXIT F |
Парткод: | 303NM16041 |
Деталь: | PLATE EXIT R |
Парткод: | 303NM16050 |
Деталь: | ARM SENSOR |
Парткод: | 303NM16300 |
Деталь: | PLATE EXIT LOWER |
Парткод: | 303NM16060 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | HOLDER SENSOR |
Парткод: | 303NM16290 |
Деталь: | Cover Upper |
Парткод: | 303NM16271 |
Деталь: | COVER EXIT F |
Парткод: | 303NM16220 |
Деталь: | COVER PWB EXIT |
Парткод: | 303NM16150 |
Деталь: | STOPPER BYPASS TABLE |
Парткод: | 302R408220 |
Деталь: | SPRING RELEASE COVER |
Парткод: | 303JY24640 |
Деталь: | GUIDE EXIT A |
Парткод: | 303NM16020 |
Деталь: | STAY GUIDE LOWER |
Парткод: | 303NM16260 |
Деталь: | LEVER EXIT RIGHT |
Парткод: | 303NM16080 |
Деталь: | SHAFT LEVER EXIT |
Парткод: | 303NM16070 |
Деталь: | HOOK LEVER JAM JS F |
Парткод: | 303MA16570 |
Деталь: | SPRING EXIT PUSH |
Парткод: | 302FZ28270 |
Деталь: | PARTS FAN COOLING 50 SP |
Парткод: | 302LC94320 |
Деталь: | SHAFT CONVEYING HOOK UP |
Парткод: | 302K929100 |
Деталь: | LEVER COVER RIGHT |
Парткод: | 302NH29060 |
Деталь: | RING STOPPER /A-49 FEED A4 |
Парткод: | 5MVX111DN003 |
Деталь: | PLATE CONVEYING TOP |
Парткод: | 302K929051 |
Деталь: | PLATE CONVEYING LOW |
Парткод: | 302K929040 |
Деталь: | WIRE MPF JOINT |
Парткод: | 302LC46480 |
Деталь: | ARM HOOK F |
Парткод: | 302K929400 |
Деталь: | HOOK CONVEYING UP |
Парткод: | 302K929120 |
Деталь: | SPRING HOOK UP |
Парткод: | 302K929190 |
Деталь: | HOOK CONVEYING LOW F |
Парткод: | 302K929140 |
Деталь: | SPRING HOOK |
Парткод: | 3HL07240 |
Деталь: | CAM HOOK FRONT |
Парткод: | 302K929170 |
Деталь: | PIN CONVEYING F |
Парткод: | 302K929630 |
Деталь: | GUIDE UNIT F |
Парткод: | 302K929570 |
Деталь: | ARM HOOK R |
Парткод: | 302N729060 |
Деталь: | HOOK CONVEYING LOW R |
Парткод: | 302K929150 |
Деталь: | CAM HOOK REAR |
Парткод: | 302K929160 |
Деталь: | COVER INNER CONVEYING A |
Парткод: | 302NH29040 |
Деталь: | Cover arm |
Парткод: | 302N729050 |
Деталь: | GEAR Z30R-Z27L |
Парткод: | 302K929240 |
Деталь: | PLATE JOINT |
Парткод: | 302K929600 |
Деталь: | GUIDE GEAR |
Парткод: | 302K929610 |
Деталь: | STOPPER 6 |
Парткод: | 2BC06910 |
Деталь: | MOUNT DU DRIVE |
Парткод: | 302K929063 |
Деталь: | SPRING LEVER EF |
Парткод: | 302F902180 |
Деталь: | GUIDE UNIT R |
Парткод: | 302K929580 |
Деталь: | PARTS PWB JUNCTION ASSY SP |
Парткод: | 302K994201 |
Деталь: | SPRING HOLDER PULLEY |
Парткод: | 302K924770 |
Деталь: | PULLEY MPT BYPASS |
Парткод: | 302FZ07020 |
Деталь: | PLATE EARTH DU |
Парткод: | 302K929690 |
Деталь: | PARTS ROLLER DU UP SP |
Парткод: | 302K994491 |
Деталь: | BUSH 8 |
Парткод: | 28107310 |
Деталь: | CUT WASHER 4 |
Парткод: | 302HG12310 |
Деталь: | PLATE DRAWER |
Парткод: | 302K929620 |
Деталь: | GEAR Z43R |
Парткод: | 302K929740 |
Деталь: | MOUNT MOTOR DU UP |
Парткод: | 302K929730 |
Деталь: | BUSH DU EW |
Парткод: | 302K924830 |
Деталь: | PARTS MOTOR PM FEED SP |
Парткод: | 302K994300 |
Деталь: | COVER CLUTCH A |
Парткод: | 302K929540 |
Деталь: | FILM GUIDE DU A |
Парткод: | 302K929790 |
Деталь: | FILM GUIDE DU B |
Парткод: | 302K929800 |
Деталь: | HOLDER DRAWER |
Парткод: | 302K924390 |
Деталь: | SENSOR OPT. |
Парткод: | 7NXGP1A173LCH01 |
Деталь: | ACTUATOR DU A |
Парткод: | 302K929470 |
Деталь: | SPRING-TORSION SWITCHBACK |
Парткод: | 302K928190 |
Деталь: | PARTS,FAN COOLING CONVEYING SP |
Парткод: | 302FZ94420 |
Деталь: | ACCESS.EDGING |
Парткод: | 7YZM210006++H01 |
Деталь: | PIN CONVEYING R |
Парткод: | 302K929640 |
Деталь: | WIRE STOPPER |
Парткод: | 302K931080 |
Деталь: | SHAFT FEED |
Парткод: | 302K324460 |
Деталь: | PULLEY DU LOW |
Парткод: | 302F929260 |
Деталь: | CAP SPRING /B-11 ENCLOSURE A4 |
Парткод: | 2FM04150 |
Деталь: | SPRING-COMPRESSION DU UP |
Парткод: | 302K929780 |
Деталь: | COVER RIGHT GUIDE |
Парткод: | 302K929490 |
Деталь: | COVER WIRE |
Парткод: | 302K929750 |
Деталь: | PARTS CONVEYING UNIT (M) SP |
Парткод: | 302NH94060 |
Деталь: | Электромагнитная муфта |
Парткод: | 302KV44041 |
Цена: | 900 ₽ |
Коды ошибок
C0070
C0080
C0100
C0120
C0130
C0150
C0160
C0170
C0180
C0350
C0360
C0630
C0640
C0650
C0660
C0670
C0680
C0800
C0830
C0840
C0870
C0920
C0950
C0980
C1000
C1010
C1020
C1050
C1060
C1070
C1100
C1110
C1140
C1250
C1350
C1410
C1450
C1800
C1810
C1820
C1900
C1910
C1920
C1950
C2101
C2102
C2103
C2104
C2201
C2202
C2203
C2204
C2211
C2212
C2214
C2231
C2232
C2233
C2234
C2241
C2242
C2243
C2244
C2300
C2610
C2640
C2650
C2660
C2670
C2700
C2730
C2760
C2770
C2780
C2790
C2810
C2820
C2840
C2850
C2860
C2870
C3100
C3200
C3210
C3300
C3310
C3500
C3600
C3800
C3900
C4001
C4002
C4003
C4004
C4101
C4102
C4103
C4104
C4201
C4202
C4203
C4204
C4300
C4600
C4701
C4702
C5101
C5102
C5103
C5104
C5131
C5132
C5133
C5134
C6000
C6020
C6030
C6040
C6050
C6100
C6120
C6130
C6150
C6200
C6220
C6230
C6250
C6320
C6330
C6410
C6600
C6610
C6620
C6740
C6760
C6770
C6910
C6920
C6930
C6950
C6960
C6980
C7001
C7002
C7003
C7004
C7101
C7102
C7103
C7104
C7200
C7210
C7221
C7231
C7241
C7251
C7301
C7302
C7303
C7304
C7401
C7402
C7403
C7404
C7411
C7412
C7413
C7414
C7460
C7470
C7480
C7601
C7602
C7800
C7850
C7860
C7901
C7902
C7903
C7904
C7911
C7912
C7913
C7914
C7941
C7942
C7943
C7944
C8010
C8020
C8030
C8090
C8100
C8110
C8120
C8130
C8140
C8150
C8160
C8170
C8180
C8190
C8200
C8210
C8230
C8260
C8300
C8310
C8320
C8330
C8340
C8350
C8360
C8370
C8410
C8420
C8430
C8500
C8510
C8520
C8800
C8900
C8930
C9000
C9040
C9050
C9060
C9070
C9080
C9200
C9210
C9220
C9500
C9510
C9540
F000
F010
F020
F021
F022
F040
F041
F050
F051
F052
F186
F278
Описание
Error code: | C0070 |
Description: | Toner motor |
Causes: | Abnormal detection of FAX control PWB incompatibility in the initial communication with the FAX control PWB, any normal communication command is not transmitted. |
Remedy: | 1 Checking the FAX PWB The incompatible FAX PWB is installed. Install the FAX PWB for the applicable model. 2 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 3 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
Error code: | C0080 |
Description: | Optional Printing System device error Object: Printing System16 (120V / 230V (Europe) / 240V) |
Causes: | The FPGA version of the interface PWB to control Fiery cannot be read. (FPGA failure) |
Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Replacing the interface PWB The interface PWB for other models is installed. Replace with the interface PWB for the applicable models. Printing System Installation Guide 3 Firmware upgrade The firmware is not the latest version. Upgrade the main firmware to the latest version. Firmware Update 4 Checking the connection The connector is not properly connected. Or, the USB cable is faulty. Clean the terminal of the following USB connector and reconnect the connectors. If there is no continuity, replace the USB cable. • Interface PWB - Main PWB Wiring diagram 5 4 Replacing the interface PWB The interface PWB is faulty. Replace the interface PWB. Printing System Installation Guide 6 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
Error code: | C0100 |
Description: | Charge corona winding problem |
Causes: | An abnormal status is output from the flash memory. |
Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. If not repaired, replace the main PWB. |
Error code: | C0120 |
Description: | MAC address data error |
Causes: | The MAC address data is incorrect. |
Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the MAC address The MAC address is incorrect. Replace the main PWB when the MAC address is not indicated on the network status page. |
Error code: | C0130 |
Description: | Backup memory read / write error |
Causes: | The reading or writing into the flash memory is unavailable. |
Remedy: | 1 Resetting the main power The flash memory does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the main PWB The main PWB is faulty. Reconnect the connectors on the main PWB. At that time, fix or replace the wires if they are pinched by other parts or have any damage. When the issue is not resolved, replace the main PWB. |
Error code: | C0150 |
Description: | Engine EEPROM reading / writing error |
Causes: | 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing data. 2. The data read reading in 2 points mismatches 8 times continuously. 3. The read data and the write data mismatch 8 times continuously. |
Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the EEPROM on the engine PWB The EEPROM is not properly installed. Reattach the EEPROM on the engine PWB. 3 Checking the EEPROM on the engine PWB The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. Detaching and reattaching the EEPROM 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C0160 |
Description: | Engine PWB EEPROM data error |
Causes: | The data read from the EEPROM is judged as abnormal. |
Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Executing U021 The storage data in the EEPROM on the engine PWB is faulty. Execute U021. Executing U021 3 Replacing the EEPROM The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. |
Error code: | C0170 |
Description: | Charger count error |
Causes: | The values in one of the billing counters, life counter or the scanner counter mismatch between the main side and the engine side. |
Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. Detaching and reattaching the main PWB 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C0180 |
Description: | Machine serial number mismatch |
Causes: | The machine serial Nos. in the main PWB and the EEPROM on the engine PWB mismatch when turning the power on. |
Remedy: | 1 Checking the machine serial No. of the main PWB The main PWB for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct main PWB if the MAIN No. differs. Executing U004 2 Checking the machine serial No. in the EEPROM on the engine PWB The EEPROM for the different main unit is installed. Check the machine serial Nos of MAIN and ENGINE at U004, and install the correct EEPROM on the engine PWB if the ENGINE machine serial No. differs. Executing U004 3 Replacing the main PWB The main PWB is faulty. If the serial number at the main is different at U004, execute U004 after replacing the main PWB. 4 Checking the EEPROM on the engine PWB The EEPROM is faulty. If the serial number at the engine is different at U004, reinstall the EEPROM on the engine PWB. If not repaired, replace the EEPROM and execute U004. Note: Please do not execute U004 in condition the serial number is different. (by selecting [Execute] and pressing [Start] key). Different serial number will be overwritten. Executing U004 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C0350 |
Description: | Panel PWB communication error (Electronic volume I2C communication error) |
Causes: | Since NACK was received during the I2C communication, the retry was repeated 5 times and the initial command was transmitted, and then the retry was repeated 5 times again. After that, NACK was also received. |
Remedy: | 1 Resetting the main power The operation of the operation panel main PWB is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Operation panel main PWB - Main PWB • Operation panel main PWB - NFC PWB Wiring diagram 3 Replacing the operation panel main PWB The operation panel main PWB is faulty. Replace the panel main PWB. Detaching and reattaching the operation panel PWB 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB 5 Replacing the NFC PWB The NFC PWB is faulty. Replace the NFC PWB. |
Error code: | C0360 |
Description: | Engine CPU - Feed ASIC communication error |
Causes: | The communication with the feed ASIC failed 10 times continuously. |
Remedy: | 1 Resetting the main power The engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity. • Feed PWB - Engine PWB Wiring diagram 4 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C0630 |
Description: | DMA error |
Causes: | DMA transmission of the image data does not finish within the certain time. |
Remedy: | 1 Checking the connection 0 0 2 Checking the connection 0 0 3 Replacing the wire The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • DPCIS - DP relay PWB • DP relay PWB - Main PWB Wiring diagram 4 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. Detaching and reattaching the DP relay PWB 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
Error code: | C0640 |
Description: | Hard Disk error |
Causes: | The HDD cannot be accessed properly. |
Remedy: | 1 (When abnormal sounds occur) Replacing the HDD The HDD is faulty. Replace the HDD when the abnormal sounds are from the HDD. Detaching and reattaching the HDD 2 Checking the connection The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the following SATA cable or the terminal of the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • HDD - Main PWB Wiring diagram 3 Initializing the HDD The HDD storage data is faulty. Execute U024 [HDD Format] > [FULL]. Executing U024 4 Replacing the HDD The HDD is faulty. Replace the HDD. Detaching and reattaching the HDD 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
Error code: | C0650 |
Description: | Scan sensor or scan problem |
Causes: | The SSD (FAX image storage) used in other main unit is installed. |
Remedy: | 1 Checking the SSD The SSD (FAX image storage) already used in other unit is installed. When installing the SSD used once, replace with the correct SSD. Detaching and reattaching the SSD 2 Executing U671 The SSD (FAX image storage) already used in other unit is reused without executing U671. If installing the used SSD, execute U671 [FAX Data CLEAR]. Executing U671 3 Reinstalling the SSD The SSD (FAX image storage) is not properly installed. Be sure to install the SSD to the connector on the main PWB. Detaching and reattaching the SSD 4 Replacing the SSD The SSD (FAX image storage) is faulty. Replace with the new SSD. Detaching and reattaching the SSD 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
Error code: | C0660 |
Description: | Scan motor problem |
Causes: | 1. The encrypted password input when replacing the main PWB is not correct. 2. The SSD which was used in other main unit is installed. |
Remedy: | 1 (When the issue occurs after replacing the main PWB) Executing U004 The encryption key after replacing the main PWB is faulty. Execute U004 when this issue occurs after replacing the main PWB. Executing U004 2 (When abnormal sounds occur) Replacing the HDD The HDD is faulty. Replace the HDD when the abnormal sounds are from the HDD. Detaching and reattaching the HDD 3 Checking the connection The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the following SATA cable or the terminal of the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • HDD - Main PWB Wiring diagram 4 Initializing the HDD The HDD storage data is faulty. Execute U024 [HDD Format] > [FULL]. Executing U024 5 Replacing the HDD The HDD is faulty. Replace the HDD. Detaching and reattaching the HDD 6 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
Error code: | C0670 |
Description: | Hard Disk overwriting error |
Causes: | The area that cannot be properly overwritten exists in a part of the HDD. |
Remedy: | 1 (When abnormal sounds occur) Replacing the HDD The HDD is faulty. Replace the HDD when the abnormal sounds are from the HDD. Detaching and reattaching the HDD 2 Checking the connection The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the following SATA cable or the terminal of the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • HDD - Main PWB Wiring diagram 3 Initializing the HDD The HDD storage data is faulty. Execute U024 [HDD Format] > [FULL]. Executing U024 4 Replacing the HDD The HDD is faulty. Replace the HDD. Detaching and reattaching the HDD 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
Error code: | C0680 |
Description: | SSD error |
Causes: | The SSD cannot be accessed, or the error occurs when accessing to the SSD. |
Remedy: | 1 Checking the SSD (if lit after replacing the SSD) An SSD out of specification is installed. Install the SSD matching the memory capacity specification. 2 Resetting the main power The SSD is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 3 Reinstalling the SSD The SSD is not properly installed. Reinstall the SSD on the main PWB. Detaching and reattaching the SSD 4 Initializing the SSD The data stored in the SSD is faulty. Retrieve the SSD storage data at U026, and then initialize the SSD at U024. Executing U026 / U024 5 Replacing the SSD The SSD is faulty. Retrieve the SSD storage data at U026, and replace the SSD. Executing U026 / detaching and reattaching the SSD 6 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
Error code: | C0800 |
Description: | Image processing error |
Causes: | The print sequence jam (J010x) was detected 2 times continuously. |
Remedy: | 1 Checking the image data The image data is faulty. When this issue occurs only when handling the certain image data, check if the image data is faulty. 2 Checking the situation The printing operation of the certain file is faulty. Acquire the jobs log if the phenomenon can be reproduced by specifying the job when the error was detected.` 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Reinsert all the connectors on the main PWB. If the wire is pinched by other parts or it is damaged, repair or replace the wire. Detaching and reattaching the main PWB 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
Error code: | C0830 |
Description: | FAX PWB flash program area checksum error |
Causes: | The program stored in the flash memory on the FAX PWB is broken so it cannot perform. |
Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 2 Checking the FAX PWB The FAX PWB is not properly connected. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 3 Initializing the fax The data in the FAX PWB is faulty. Execute U600 to initialize the FAX. Executing U600 4 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide |
Error code: | C0840 |
Description: | RTC error ("Time for maintenance T" appears) |
Causes: | [Check at start-up] • RTC values are old. • Power has not been turned on for over 5 years. • RTC value is older than 2000/1/1 00:01. [Periodic check per 5 minutes after start-up] • RTC values are older than the ones at the last check. • Partial operation by power reset after C840 error and "Time for Maintenance T" is indicated. |
Remedy: | 1 Executing U906 The backup battery on the main PWB is faulty, and so, the RTC settings are erased after unplugging the power cord. Execute U906 to reset the display [Maintenance T]. After that, set the date/time (RTC) in the System menu. (It is necessary to execute this process whenever to unplug/plug the power cord.) Executing U906 2 Replacing the main PWB The main PWB is faulty, or the backup battery runs out. If service call error C0840 frequently appears after performing the previous step, replace the main PWB. Detaching and reattaching the main PWB |
Error code: | C0870 |
Description: | PC FAX Image data transmission error |
Causes: | Data was not properly transmitted even if the specified times of retry were made when the large volume data is transmitted between the FAX PWB and the main PWB. |
Remedy: | 1 Resetting the main power The FAX PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 2 Initializing the fax The data in the FAX PWB is faulty. Execute U600 to initialize the FAX. Executing U600 3 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 4 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB 6 Executing U024 The data stored in the SSD is faulty. Execute U024 [SSD Format]. Executing U024 |
Error code: | C0920 |
Description: | 1st drawer lift |
Causes: | The backup data could not be stored since the file system of the flash memory is faulty. |
Remedy: | 1 Initializing the fax FAX control values are incorrect Execute U600 to initialize the FAX. Executing U600 2 Checking the FAX PWB The FAX PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, reattach the FAX PWB and turn the main power switch and the power switch on. FAX Installation Guide 3 Reinstalling the FAX PWB The FAX PWB is not properly installed. Reinstall the FAX PWB. FAX Installation Guide 4 Firmware upgrade The firmware is not the latest version. Upgrade the fax firmware to the latest version. Firmware Update 5 Replacing the FAX PWB The FAX PWB is faulty. Replace the FAX PWB. FAX Installation Guide |
Error code: | C0950 |
Description: | 4th drawer lift problem |
Causes: | Print processing of the received FAX could not be executed and the job continues staying. |
Remedy: | 1 Resetting the main power The printing process is not properly executed. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is faulty. Upgrade the main firmware to the latest version. Firmware upgrade |
Error code: | C0980 |
Description: | 24V power interruption detection |
Causes: | 1. The 24V power interruption signal was detected for 1s continuously. 2. After passing 100ms since the 24V power interruption signal was detected, the other service call error appeared. Then, the 24V power supply recovered. |
Remedy: | 1 Resetting the main power The printing process is not properly executed. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • LVU - Engine PWB Wiring diagram 3 Replacing the LVU The LVU is faulty. Replace the LVU if +24V output from the LVU is not stable and reduced. Detaching and reattaching the LVU 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1000 |
Description: | MP lift motor error |
Causes: | The upper MP lift sensor (for upper limit detection) or lower MP lift sensor (for lower limit detection) does not detect turning on for 3s when the MP lift motor ascends or descends. |
Remedy: | 1 Checking the lift base The lift base does not properly operate. If the lift base of the MP tray does not move up and down, repair or replace the lift base. 2 Checking the lift lever The lift lever is not properly attached. Check if the lift lever is located where it moves up and down by the lift motor cam or has no damage. Then, reattach the MP tray or replace the lift lever. 3 Checking the drive gear The drive gears for lifting up the lift base do not properly rotate. Check if the drive gears for lifting up the lift base can rotate smoothly or have no excessive load. Then, apply grease and repair the parts. 4 Checking the conveying unit The drawer connector connection between the conveying unit and the main unit is faulty. Firmly close the conveying unit. If there are foreign objects or the deformation on the drawer connector of the conveying unit for connecting to the main unit, repair them. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • MP lift motor - Relay PWB • Relay PWB - Feed PWB Wiring diagram 6 Checking the MP lift motor The MP lift motor is faulty. Check the MP lift motor operation, and replace the motor if necessary. 7 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Upper or lower MP lift sensor - Relay PWB • Relay PWB - Feed PWB Wiring diagram 8 Checking the sensor The upper or lower MP lift sensor is not properly attached or faulty. Reattach the upper or lower MP lift sensor. If not repaired, replace the sensor. 9 Replacing the relay PWB The relay PWB is faulty. Replace the relay PWB. 10 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 11 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 12 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1010 |
Description: | Lift motor 1 error |
Causes: | Either of the following was detected 5 times continuously. 1. Lift sensor 2 does not turn on when passing 12s after cassette 1 is installed. 2. The lock-up signal is not released for 1s after lift motor 1 turns on. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the wire The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Lift motor 1 - Feed PWB Wiring diagram 4 Checking lift motor 1 Lift motor 1 is faulty. Check the operation of lift motor 1, and replace it if necessary. Detaching and reattaching the lift motor 5 Checking the wire The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Lift sensor 1 - Feed PWB Wiring diagram 6 Checking the sensor Lift sensor 1 is not properly attached or faulty. Reattach lift sensor 1. If not repaired, replace the sensor. 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1020 |
Description: | Lift motor 2 error |
Causes: | Either of the following was detected 5 times continuously. 1. Lift sensor 2 does not turn on when passing 12s after cassette 2 is installed. 2. The lock-up signal is not released for 1s after lift motor 2 turns on. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the wire The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Lift motor 2 - Feed PWB Wiring diagram 4 Checking lift motor 2 Lift motor 2 is faulty. Check the operation of lift motor 2, and replace it if necessary. Detaching and reattaching the lift motor 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Lift sensor 2 - Feed PWB Wiring diagram 6 Checking the sensor Lift sensor 2 is not properly attached or faulty. Reattach lift sensor 2. If not repaired, replace the sensor. 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1050 |
Description: | PF lift motor error Object: Side multi feeder |
Causes: | [Side multi feeder] The lift error continued 5 times because of one of the phenomena below. 1. The PF lift sensor does not turn on when passing 12s while the PF lift motor turns on for the first time after installing the cassette 2. The PF lift sensor does not turn on when passing 2s while the PF lift motor turns on for the second time or later after insetting the cassette. 3. The lift excess current protection monitor signal turning on is detected for 1s or more while the PF lift motor is operating. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor - PF main PWB Wiring diagram 4 Checking the PF lift motor The PF lift motor is faulty. Replace the PF lift motor. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift sensor - PF main PWB Wiring diagram 6 Checking the sensor The PF lift sensor is not properly attached or faulty. Reattach the PF lift sensor. If not repaired, replace the sensor. 7 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) |
Error code: | C1060 |
Description: | PF lift motor 1 error Object: Side multi feeder + Large capacity feeder, or Side multi feeder + Paper feeder |
Causes: | [Paper feeder or large capacity feeder] The lift error occurred 5 times because one if the below phenomenon. 1. The PF lift sensor1 does not turn ON even passing 12s (paper feeder), 23s (large capacity feeder) at the first time the PF lift motor1 ON after inserting the cassette. 2. The PF lift sensor1 does not turn ON even passing 2s at the second time the PF lift motor1 ON or later after inserting the cassette. 3. Detect the lift excess current protection monitor signal ON for more than 1s during the PF lift motor1 operates. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the lift motor drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor 1 - PF main PWB Wiring diagram 4 Replacing PF lift motor 1 PF lift motor 1 is faulty. Replace PF lift motor 1. Detaching and reattaching the PF lift motor 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift sensor 1 - PF main PWB Wiring diagram 6 Checking the sensor PF lift sensor 1 is not properly attached or faulty. Reattach PF lift sensor 1. If not repaired, replace the sensor. 7 (When installing the paper feeder) Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Paper feeder) Detaching and reattaching the PF main PWB (Paper feeder) 8 (When installing the large capacity feeder) Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Large capacity feeder) Detaching and reattaching the PF main PWB (Large capacity feeder) |
Error code: | C1070 |
Description: | PF lift motor 2 error Object: Side multi feeder + Large capacity feeder, or Side multi feeder + Paper feeder |
Causes: | [Paper feeder or large capacity feeder] The lift error continued 5 times because of one of the phenomena below. 1. The PF lift sensor 2 does not turn on when passing 12s (for paper feeder)or 23s (for large capacity feeder) while the PF lift motor 2 turns on for the first time after inserting the cassette. 2. The PF lift sensor 2 does not turn on when passing 2s while the PF lift motor2 turns on for the second time or later after inserting the cassette. 3. Detect the lift excess current protection monitor signal ON for more than 1s during the PF lift motor2 operates. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the lift motor drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor 2 - PF main PWB Wiring diagram 4 Replacing PF lift motor 2 PF lift motor 2 is faulty. Replace PF lift motor 2. Detaching and reattaching the PF lift motor 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •PF lift sensor 2 - PF main PWB Wiring diagram 6 Checking the sensor PF lift sensor 2 is not properly attached or faulty. Reattach PF lift sensor 2. If not repaired, replace the sensor. 7 (When installing the paper feeder) Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Paper feeder) Detaching and reattaching the PF main PWB (Paper feeder) 8 (When installing the large capacity feeder) Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Large capacity feeder) Detaching and reattaching the PF main PWB (Large capacity feeder) |
Error code: | C1100 |
Description: | PF lift motor 1 error |
Causes: | [The right cassette section of the large capacity feeder for the main unit] The lift error continued 5 times because one of the phenomena below. 1. PF lift sensor 1 does not turn on when passing 23s while PF lift motor 1 turns on for the first time after inserting the cassette. 2. PF lift sensor 1 does not turn on when passing 2s while PF lift motor 1 turns on for the second time or later after inserting the cassette. 3. The excess lift current protection monitor signal turning on for 1s or more is detected while the PF lift motor 1 is operating. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor 1 - PF main PWB Wiring diagram 4 Checking PF lift motor 1 PF lift motor 1 is faulty. Replace PF lift motor 1. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift sensor 1 - PF main PWB Wiring diagram 6 Checking the sensor PF lift sensor 1 is not properly attached or faulty. Reattach PF lift sensor 1. If not repaired, replace the sensor. 7 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. Detaching and reattaching the PF main PWB |
Error code: | C1110 |
Description: | PF lift motor 2 error |
Causes: | [The left cassette section of the large capacity feeder for the main unit] The lift error continued 5 times because of one of the phenomena below. 1. PF lift sensor 2 does not turn on when passing 23s while PF lift motor 2 turns on for the first time after inserting the cassette. 2. PF lift sensor 2 does not turn on when passing 2s while PF lift motor 2 turns on for the second time or later after inserting the cassette. 3. The excess lift current protection monitor signal turning on for 1s or more is detected while the PF lift motor 2 is operating. |
Remedy: | 1 Checking the cassette base The cassette base does not operate properly. Repair or replace the cassette base if it cannot move vertically. 2 Checking the drive gear The drive gear to lift up the cassette base does not rotate properly. Check if the drive gears to lift up the cassette base rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor 2 - PF main PWB Wiring diagram 4 Replacing PF lift motor 2 PF lift motor 2 is faulty. Replace PF lift motor 2. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •PF lift sensor 2 - PF main PWB Wiring diagram 6 Checking the sensor PF lift sensor 2 is not properly attached or faulty. Reattach PF lift sensor 2. If not repaired, replace the sensor. 7 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. Detaching and reattaching the PF main PWB |
Error code: | C1140 |
Description: | PF lift motor error Object: Side feeder |
Causes: | 1. The PF lift upper limit sensor does not turn on when passing 30s after cassette 5 is inserted. 2. The lock-up signal is detected for 200ms continuously during the PF lift motor operation. 3. The PF lift upper limit sensor does not turn on when passing 2s after the upper limit control when printing starts. |
Remedy: | 1 Checking the bottom plate The bottom plate does not operate properly. Repair or replace the bottom plate when it does not move vertically. 2 Checking the drive gear The drive gear to lift up the bottom plate does not rotate properly. Check if the drive gears to lift up the bottom plate rotate smoothly or have no excessive load. And apply the grease to the frictional parts and fix the related parts so that they can rotate smoothly. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift motor - PF main PWB Wiring diagram 4 Checking the PF lift motor The PF lift motor is faulty. Replace the PF lift motor. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF lift upper limit sensor - PF main PWB Wiring diagram 6 Checking the PF lift upper limit sensor The PF lift upper limit sensor is not properly attached or faulty. Reattach the PF lift upper limit sensor. Then, replace it if it is not fixed. 7 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. Detaching and reattaching the PF main PWB |
Error code: | C1250 |
Description: | PF multi-feeding sensor communication error Object: Side multi feeder (For the internal count) |
Causes: | The PF multi-feeding sensor receives the incorrect communication command 3 times continuously. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF multi-feeding sensor (emitter) - PF main PWB • PF multi-feeding sensor (receiver) - PF main PWB Wiring diagram 2 Replacing the PF multifeeding sensors The PF multi-feeding sensor is faulty. Replace the PF multi-feeding sensor (emitter) or the PF multi-feeding sensor (receiver). 3 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) |
Error code: | C1350 |
Description: | PF multi-feeding sensor error Object: Side multi feeder (For the internal count) |
Causes: | The multi-feeding is detected 5 times continuously. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF multi-feeding sensor (emitter) - PF main PWB • PF multi-feeding sensor (receiver) - PF main PWB Wiring diagram 2 Replacing the PF multifeeding sensors The PF multi-feeding sensor is faulty. Replace the PF multi-feeding sensor (emitter) or the PF multi-feeding sensor (receiver). 3 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) |
Error code: | C1410 |
Description: | Rotary decurler error |
Causes: | The BR conveying decurler sensor does not turn on after cumulative 3 times of operating 400-steps at standby. Or, the BR conveying decurler sensor does not turn off after operating 400-steps at standby. |
Remedy: | 1 Checking the rotary decurler The rotary decurler is not properly attached. Check if the rotary decurler or the drive gears rotate smoothly and have no excessive load. Then, apply grease or repair the parts. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BR decurler sensor - BR main PWB • BR conveying guide motor - BR main PWB • BR main PWB - Engine PWB Wiring diagram 3 Checking the sensor The BR decurler sensor is faulty. Replace the BR decurler sensor 4 Replacing the BR conveying guide motor The BR conveying guide motor is faulty. Replace the BR conveying guide motor. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the BR main PWB The BR main PWB is faulty. Replace the BR main PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1450 |
Description: | PF multi-feeding sensor backup error Object: Side multi feeder (For the internal count) |
Causes: | 1. Write data and read data does not match 3 times continuously when writing. 2. Block erase failed 3 times continuously. 3. Writing does not complete when passing 200ms after starting writing. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF multi-feeding sensor (emitter) - PF main PWB • PF multi-feeding sensor (receiver) - PF main PWB Wiring diagram 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side multi feeder firmware to the latest version. Firmware Update 3 Replacing the PF multifeeding sensors The PF multi-feeding sensor is faulty. Replace the PF multi-feeding sensor (emitter) or the PF multi-feeding sensor (receiver). 4 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) |
Error code: | C1800 |
Description: | Large capacity feeder communication error Condition: When turning the main power off and on while disconnecting the connector of the cable from the side multi feeder, this service call error does not reappear. (It is caused by the large capacity feeder.) |
Causes: | The communication error was detected 10 times continuously. |
Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the large capacity feeder firmware to the latest version. Firmware Update 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF main PWB (Large capacity feeder) - PF main PWB (Side multi feeder) • PF main PWB (Side multi feeder) - Engine PWB Wiring diagram 3 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Large capacity feeder) Detaching and reattaching the PF main PWB (Large capacity feeder) 4 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1810 |
Description: | Side Multi Feeder communication error Object: Side multi feeder |
Causes: | The communication error was detected 10 times continuously. |
Remedy: | 1 Checking the connection It is not properly connected to the main unit. Reconnect the cable of the side multi feeder to the main unit. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF main PWB - Engine PWB Wiring diagram 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side multi feeder firmware to the latest version. Firmware Update 4 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1820 |
Description: | Side Feeder communication error Object: Side feeder |
Causes: | The communication error was detected 10 times continuously. |
Remedy: | 1 Checking the connection It is not properly connected to the main unit. Reconnect the cable of the side feeder to the main unit. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF main PWB - Engine PWB Wiring diagram 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side feeder firmware to the latest version. Firmware Update 4 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side feeder) Detaching and reattaching the PF main PWB (Side feeder) 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1900 |
Description: | Large capacity feeder EEPROM error Condition: When outputting Event Log after turning the main power off and on while disconnecting the connector of the cable from the side multi feeder, this service call error is not recorded. (It is caused by the large capacity feeder.) (For the internal count) |
Causes: | The writing data and the reading data mismatch 3 times continuously when writing. |
Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the large capacity feeder firmware to the latest version. Firmware Update 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF main PWB (Large capacity feeder) - PF main PWB (Side multi feeder) • PF main PWB (Side multi feeder) - Engine PWB Wiring diagram 3 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Large capacity feeder) Detaching and reattaching the PF main PWB (Large capacity feeder) 4 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1910 |
Description: | Side Multi Feeder EEPROM error (For the internal count) |
Causes: | The writing data and the reading data mismatch 3 times continuously when writing. |
Remedy: | 1 Checking the connection It is not properly connected to the main unit. Reconnect the cable of the side multi feeder to the main unit. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF main PWB - Engine PWB (Cable from the Side Multi Feeder) Wiring diagram 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side multi feeder firmware to the latest version. Firmware Update 4 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1920 |
Description: | Side Feeder EEPROM error (For the internal count) |
Causes: | The writing data and the reading data mismatch 3 times continuously when writing. |
Remedy: | 1 Checking the connection It is not properly connected to the main unit. Reconnect the cable of the side feeder to the main unit. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF main PWB - Engine PWB Wiring diagram 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side feeder firmware to the latest version. Firmware Update 4 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side feeder) Detaching and reattaching the PF main PWB (Side feeder) 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C1950 |
Description: | Primary transfer belt unit EEPROM error |
Causes: | The EEPROM cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing the data. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data do not match 8 times continuously. |
Remedy: | 1 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed or the connector is not connected. Reinstall the primary transfer belt unit and reconnect the connector. Detaching and reattaching the primary transfer belt unit 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 3 Primary transfer belt unit replacement The primary transfer belt unit is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2101 |
Description: | Developer motor error |
Causes: | 1. The ready signal is not at the L level when passing 2s after the developer motor drive starts. 2. The ready signal is at the H level for 1s continuously after developer motor is stable. |
Remedy: | 1 Checking the developer drive section The developer drive section is faulty. Replace the developer unit drive gear if it is faulty. 2 Checking the developer roller The developer roller is faulty. Check if the developer roller rotates, and replace the developer unit if not rotating. Detaching and reattaching the developer unit 3 Checking the developer motor The developer motor drive is faulty. Execute U030 [DLP(K)] and check the developer motor K operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 5 Checking the developer motor The developer motor is not properly attached or faulty. Reattach the developer motor. If not repaired, replace the motor. Detaching and reattaching the developer motor 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2102 |
Description: | Developer motor C error |
Causes: | 1. The ready signal is not at the L level when passing 2s after the developer motor C drive starts. 2. The ready signal is at the H level for 1s continuously after developer motor C is stable. |
Remedy: | 1 Checking the developer drive section The developer drive section is faulty. Replace the developer unit drive gear if it is faulty. 2 Checking the developer roller The developer roller is faulty. Check if the developer roller rotates, and replace the developer unit if not rotating. Detaching and reattaching the developer unit 3 Checking developer motor C The developer motor C drive is faulty. Execute U030 [DLP(C)] and check the developer motor C operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer motor C - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 5 Checking developer motor C Developer motor C is not properly attached or faulty. Reattach developer motor C. If not repaired, replace the motor. Detaching and reattaching the main drive unit 6 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2103 |
Description: | Developer motor M error |
Causes: | 1. The ready signal is not at the L level when passing 2s after the developer motor M drive starts. 2. The ready signal is at the H level for 1s continuously after developer motor M is stable. |
Remedy: | 1 Checking the developer drive section The developer drive section is faulty. Replace the developer unit drive gear if it is faulty. Detaching and reattaching the developer unit 2 Checking the developer roller The developer roller is faulty. Check if the developer roller rotates, and replace the developer unit if not rotating. Detaching and reattaching the developer unit 3 Checking developer motor M The developer motor M drive is faulty. Execute U030 [DLP(M)] and check the developer motor M operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer motor M - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 5 Checking developer motor M Developer motor M is not properly attached or faulty. Reattach developer motor M. If not repaired, replace the motor. Detaching and reattaching the main drive unit 6 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2104 |
Description: | Developer motor Y error |
Causes: | 1. The ready signal is not at the L level when passing 2s after the developer motor Y drive starts. 2. The ready signal is at the H level for 1s continuously after developer motor Y is stable. |
Remedy: | 1 Checking the developer drive section The developer drive section is faulty. Replace the developer unit drive gear if it is faulty. Detaching and reattaching the developer unit 2 Checking the developer roller The developer roller is faulty. Check if the developer roller rotates, and replace the developer unit if not rotating. Detaching and reattaching the developer unit 3 Checking developer motor Y Developer motor Y does not properly operate. Execute U030 [DLP(Y)] and check the developer motor Y operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer motor Y - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 5 Checking developer motor Y Developer motor Y is not properly attached or faulty. Reattach developer motor Y. If not repaired, replace the motor. Detaching and reattaching the main drive unit 6 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2201 |
Description: | Drum motor steady-state error |
Causes: | The ready signal is at the H level for 1s continuously after the drum motor became stable. |
Remedy: | 1 Checking the drum motor The drum motor drive is faulty. Execute U030 [Process] and check the drum motor operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 3 Checking the drum unit and the developer unit The drum unit is faulty. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 4 Checking the drum motor The drum motor is faulty. Replace the drum motor. Detaching and reattaching the drum drive unit 5 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2202 |
Description: | Drum motor C steady-state error |
Causes: | The steady-state speed error or the abnormal motor drive is detected when reading the signal from encoder PWB C at every 1s. |
Remedy: | 1 Checking drum motor C The drum motor C drive is faulty. Execute U030 [Process] and check the drum motor C operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum motor C - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 3 Replacing drum motor C Drum motor C is faulty. Replace drum motor C. 4 Checking the drum unit and the developer unit The drum unit is faulty. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2203 |
Description: | Drum motor M steady-state error |
Causes: | The steady-state speed error or the abnormal motor drive is detected when reading the signal from encoder PWB M at every 1s. |
Remedy: | 1 Checking drum motor M The drum motor M drive is faulty. Execute U030 [Process] and check the drum motor M operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum motor M - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 3 Replacing drum motor M Drum motor M is faulty. Replace drum motor M. 4 Checking the drum unit and the developer unit The drum unit is faulty. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2204 |
Description: | Drum motor Y steady-state error |
Causes: | The steady-state speed error or the abnormal motor drive is detected when reading the signal from encoder PWB Y at every 1s. |
Remedy: | 1 Checking drum motor Y The drum motor Y drive is faulty. Execute U030 [Process] and check the drum motor Y operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum motor Y - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 3 Replacing drum motor Y Drum motor Y is faulty. Replace drum motor Y. 4 Checking the drum unit and the developer unit The drum unit is faulty. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2211 |
Description: | Drum motor startup error |
Causes: | The ready signal does not turn on when passing 2s after the drum motor starts up. |
Remedy: | 1 Checking the drum motor The drum motor operation is faulty. Execute U030 [Process] and check the drum motor operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 4 Replacing the drum motor The drum motor is faulty. Replace the drum motor. Detaching and reattaching the drum drive unit 5 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C2212 |
Description: | Drum motor M startup error |
Causes: | When reading the signal from encoder PWB C at every 1s, it does not become stable when passing 5s after the drum motor M starts driving. |
Remedy: | 1 Checking drum motor M The drum motor M operation is faulty. Execute U030 [Process] and check the drum motor M operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum motor M - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing drum motor M Drum motor M is faulty. Replace drum motor M. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2214 |
Description: | Drum motor Y startup error |
Causes: | When reading the signal from encoder PWB C at every 1s, it does not become stable when passing 5s after the drum motor Y starts driving. |
Remedy: | 1 Checking drum motor Y The drum motor Y operation is faulty. Execute U030 [Process] and check the drum motor Y operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum motor Y - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing drum motor Y Drum motor Y is faulty. Replace drum motor Y. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB.| 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2231 |
Description: | Drum motor main sensor K startup error |
Causes: | The main pulse abnormal stop is detected when reading the signal from encoder PWB K (1) at every 1s. |
Remedy: | 1 Checking drum motor K The drum motor K operation is faulty. Execute U030 [Process] and check the drum motor K operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Encoder PWB K - Drum motor K • Drum motor K - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing the drum drive unit Encoder PWB K is faulty. Replace drum drive unit K. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2232 |
Description: | Drum motor main sensor C startup error |
Causes: | The main pulse abnormal stop is detected when reading the signal from encoder PWB C (1) at every 1s. |
Remedy: | 1 Checking drum motor C The drum motor C operation is faulty. Execute U030 [Process] and check the drum motor C operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Encoder PWB C - Drum motor C • Drum motor C - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing the drum drive unit Encoder PWB C is faulty. Replace drum drive unit C. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2233 |
Description: | Drum motor main sensor M startup error |
Causes: | The main pulse abnormal stop is detected when reading the signal from encoder PWB Y (1) at every 1s. |
Remedy: | 1 Checking drum motor M The drum motor M operation is faulty. Execute U030 [Process] and check the drum motor M operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Encoder PWB M - Drum motor M • Drum motor M - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing the drum drive unit Encoder PWB M is faulty. Replace drum drive unit M. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2234 |
Description: | Drum motor main sensor Y startup error |
Causes: | The main pulse abnormal stop is detected when reading the signal from encoder PWB Y (1)at every 1s. |
Remedy: | 1 Checking drum motor Y The drum motor Y operation is faulty. Execute U030 [Process] and check the drum motor Y operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Encoder PWB Y - Drum motor Y • Drum motor Y - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing the drum drive unit Encoder PWB Y is faulty. Replace drum drive unit Y. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2241 |
Description: | Drum motor sub sensor K startup error (For the internal count) |
Causes: | The FG abnormal stop is detected when reading the signal from encoder PWB K (2) at every 1s. |
Remedy: | 1 Checking drum motor K The drum motor K operation is faulty. Execute U030 [Process] and check the drum motor K operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Encoder PWB K - Drum motor K • Drum motor K - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing the drum drive unit Encoder PWB K is faulty. Replace drum drive unit K. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2242 |
Description: | Drum motor sub sensor C startup error (For the internal count) |
Causes: | The FG abnormal stop is detected when reading the signal from encoder PWB C (2) at every 1s. |
Remedy: | 1 Checking drum motor C The drum motor C operation is faulty. Execute U030 [Process] and check the drum motor C operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Encoder PWB C - Drum motor C • Drum motor C - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing the drum drive unit Encoder PWB C is faulty. Replace drum drive unit C. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2243 |
Description: | Drum motor sub sensor M startup error (For the internal count) |
Causes: | The FG abnormal stop is detected when reading the signal from encoder PWB Y (2) at every 1s. |
Remedy: | 1 Checking drum motor M The drum motor M operation is faulty. Execute U030 [Process] and check the drum motor M operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Encoder PWB M - Drum motor M • Drum motor M - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing the drum drive unit Encoder PWB M is faulty. Replace drum drive unit M. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2244 |
Description: | Drum motor sub sensor Y startup error (For the internal count) |
Causes: | The FG abnormal stop is detected when reading the signal from encoder PWB Y (2) at every 1s. |
Remedy: | 1 Checking drum motor Y The drum motor Y operation is faulty. Execute U030 [Process] and check the drum motor Y operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the drum unit and the developer unit The drum does not properly rotate. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Encoder PWB Y - Drum motor Y • Drum motor Y - Motor relay PWB • Motor relay PWB - Engine PWB Wiring diagram 4 Replacing the drum drive unit Encoder PWB Y is faulty. Replace drum drive unit Y. Detaching and reattaching drum drive unit K and drum drive unit MCY 5 Replacing the motor relay PWB The motor relay PWB is faulty. Replace the motor relay PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2300 |
Description: | Fuser motor error |
Causes: | 1. The ready signal is at the H level for 1s continuously during the fuser motor drive. 2. The ready signal is not at the L level (stable rotation) when passing 2s after the fuser motor drive starts. |
Remedy: | 1 Checking the fuser motor The fuser motor operation is faulty. Execute U030 [Fuser] and check the fuser motor operation. Check if the drive gears rotate smoothly and have no excessive load. Then, apply grease to the frictional parts and repair the parts. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Fuser motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 3 Replacing the fuser unit The fuser unit is faulty. Replace the fuser unit. Detaching and reattaching the fuser unit 4 Replacing the fuser motor The fuser motor is faulty. Replace the fuser motor. Detaching and reattaching the fuser drive unit 5 Replacing the fuser drive unit The fuser drive unit is faulty. Replace the fuser drive unit. Detaching and reattaching the fuser drive unit 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C2610 |
Description: | PF feed motor error (Large Capacity Feeder in the main unit) |
Causes: | The ready signal is not at the L level (stable rotation) for passing 2s since the PF feed motor drive is started. |
Remedy: | 1 Checking the PF feed motor The PF feed motor is not properly connected. The drive parts are faulty. Execute U247 [LCF] > [Motor On] to check the paper feeding operation. If the PF feed motor does not properly operate, reconnect the connector. Check if the PF feed roller and the drive gears rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. Executing U247 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF feed motor - PF main PWB • PF main PWB - Engine PWB Wiring diagram 3 Replacing the PF feed motor The PF feed motor is faulty. Replace the PF feed motor. Detaching and reattaching the PF drive unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. Detaching and reattaching the PF main PWB 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C2640 |
Description: | PF feed motor error (Side Feeder) |
Remedy: | 1 Checking the PF conveying motor The PF conveying motor is not properly connected. The drive parts are faulty. Execute U247 [Side Deck] > [Motor On] to check the paper feeding operation. If the PF conveying motor does not properly operate, reconnect the connector. Check if the PF feed roller and the drive gears rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. Executing U247 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF conveying motor - PF main PWB • PF main PWB - Engine PWB (Cable from the side feeder) Wiring diagram 4 Replacing the PF conveying motor The PF conveying motor is faulty. Replace the PF conveying motor. Detaching and reattaching the PF drive unit (Side feeder ) 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side feeder firmware to the latest version. Firmware Update 6 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side feeder) Detaching and reattaching the PF main PWB (Side feeder) 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2650 |
Description: | PF feed motor error (Side Multi Feeder) Object: Side multi feeder |
Causes: | The ready signal is not at the L level (stable rotation) for passing 2s since the PF feed motor drive is started. |
Remedy: | 1 Checking the PF feed motor The PF feed motor is not properly connected. The drive parts are faulty. Execute U247 [SMT] > [Motor On] to check the paper feeding operation. If the PF feed motor does not properly operate, reconnect the connector. Check if the PF feed roller and the drive gears rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. Executing U247 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF feed motor - PF main PWB • PF main PWB - Engine PWB (Cable from the side multi feeder) Wiring diagram 3 Replacing the PF feed motor The PF feed motor is faulty. Replace the PF feed motor. Detaching and reattaching the PF drive unit (Side multi feeder) 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the side multi feeder firmware to the latest version. Firmware Update 5 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2660 |
Description: | PF feed motor error (Large Capacity Feeder) Object: Side multi feeder + Large capacity feeder |
Causes: | The ready signal is not at the L level (stable rotation) for passing 2s since the PF feed motor drive is started. |
Remedy: | 1 Checking the PF feed motor The PF feed motor is not properly connected. The drive parts are faulty. Execute U247 [Side LCF] > [Motor On] to check the paper feeding operation. If the PF feed motor does not properly operate, reconnect the connector. Check if the PF feed roller and the drive gears rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. Executing U247 2 Checking the wire The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF feed motor - PF main PWB (Large capacity feeder) • PF main PWB (Large capacity feeder) - PF main PWB (Side multi feeder) • PF main PWB (Side multi feeder) - Engine PWB (Cable of the side multi feeder) Wiring diagram 3 Replacing the PF feed motor The PF feed motor is faulty. Replace the PF feed motor. Detaching and reattaching the PF drive unit (Large capacity feeder ) 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the large capacity feeder firmware to the latest version. Firmware Update 5 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Large capacity feeder) Detaching and reattaching the PF main PWB (Large capacity feeder) 6 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2670 |
Description: | PF feed motor error (Paper Feeder) Object: Side multi feeder + Paper feeder |
Causes: | The ready signal is not at the L level (stable rotation) for passing 2s since the PF feed motor drive is started. |
Remedy: | 1 Checking the PF feed motor The PF feed motor is not properly connected. The drive parts are faulty. Execute U247 [Side 2PF] > [Motor On] to check the paper feeding operation. If the PF feed motor does not properly operate, reconnect the connector. Check if the PF feed roller and the drive gears rotate smoothly or have no excessive load. And apply the grease to the frictional parts and repair the related parts so that they can rotate smoothly. Executing U247 2 Checking the wire The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PF feed motor - PF main PWB (Paper feeder) • PF main PWB (Paper feeder) - PF main PWB (Side multi feeder) • PF main PWB (Side multi feeder) - Engine PWB (Cable from the side multi feeder) Wiring diagram 3 Replacing the PF feed motor The PF feed motor is faulty. Replace the PF feed motor. Detaching and reattaching the PF drive unit (Paper feeder ) 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the paper feeder firmware to the latest version. Firmware Update 5 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Paper feeder) Detaching and reattaching the PF main PWB (Paper feeder) 6 Replacing the PF main PWB The PF main PWB is faulty. Replace the PF main PWB. (Side multi feeder) Detaching and reattaching the PF main PWB (Side multi feeder) 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2700 |
Description: | Color release motor error |
Causes: | Turning the color release sensor on and off is not detected for 5s while the color release motor is driving. |
Remedy: | 1 Checking the drive components The drive transmission from the color release motor error is faulty. Execute U030 [CMY Release]. If the drive from the motor is not transmitted, repair the drive parts. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 5 Primary transfer belt unit replacement The primary transfer roller lift-up drive section is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2730 |
Description: | Secondary transfer press-release error |
Causes: | Turning the transfer roller release sensor on/off is not detected for 5s when driving the transfer roller release motor. |
Remedy: | 1 Checking the drive components The drive transmission from the transfer roller release motor is faulty. Execute U030 [Press Release]. If the drive from the motor is not transmitted, repair the drive parts. Executing U030 2 Checking the transfer roller release sensor The transfer roller release sensor is not properly attached. If the transfer roller release motor does not stop and the abnormal sounds are noticed when executing U030 [Press Release], reattach the transfer roller release sensor. Executing U030 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Transfer roller release motor - Relay PWB • Relay PWB - Feed PWB Wiring diagram 4 Opening and closing the conveying unit The conveying unit is not completely closed. Firmly close the conveying unit. 5 Checking the drawer connector of the conveying unit for connecting to the main unit. The drawer connector of the conveying unit for connecting to the main unit is deformed or dirty. Clean the drawer connector of the conveying unit for connecting to the main unit if there are foreign objects, and correct the pin if it is deformed. If the drawer connector is damaged, replace it. 6 Replacing the transfer roller release sensor The transfer roller release sensor is faulty. Replace the transfer roller release sensor. 7 Replacing the conveying unit The conveying unit is faulty. Replace the conveying unit and execute U051. Executing U051 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. |
Error code: | C2760 |
Description: | Transfer motor startup error |
Causes: | The belt motor FG signal is not stable when passing 5s after the transfer motor drive starts. |
Remedy: | 1 Checking the drive components The drive transmission from the transfer motor is faulty. Check if the excessive load is not applied to the drive gears, rollers and the belt by rotating them, and clean the drive parts of the primary transfer belt unit. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Transfer motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 3 Checking the primary transfer belt unit The primary transfer belt unit is not properly installed or faulty Reinstall the primary transfer belt unit. If not repaired, replace it. Detaching and reattaching the primary transfer belt unit 4 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Checking the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2770 |
Description: | Primary transfer belt skew correction error |
Causes: | The belt skew detection sensor detects the value exceeding the upper limit or the value less than the lower limit for 6 turns or more rotation. |
Remedy: | 1 Checking the shutter of the toner waste vent The toner waste opening shutter of the primary transfer belt unit rides over. Reinstall the primary transfer belt unit. (Insert the unit slowly into the main unit while pay attention not to ride over the waste toner opening shutter of the primary transfer belt unit.) 2 Checking the levelness of the main unit The levelness adjustment of the main unit is not proper. Check if the main unit is placed on the flat. Next, execute U469 [Belt Initialize] > [Execute]. Then, select [B/W] at [Belt Check] > [Mode], and execute [Execute]. After execution, check if the value of [Angle] is within the standard (6-26). Executing U469 3 Checking the surrounding area of the belt skew detection sensor The belt skew detection sensor and the neighboring parts are dirty. Clean around the belt skew detection sensor with an airblower. 4 Checking the actuator The actuator at the belt end does not properly detect the belt position. Correct the position of actuator for the belt skew detection sensor. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 6 Primary transfer belt unit replacement The belt skew correction sensor is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2780 |
Description: | Belt skew correction sensor error |
Causes: | The belt skew correction sensor outputs the abnormally low value. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 2 Primary transfer belt unit replacement The belt skew correction sensor is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2790 |
Description: | Belt skew correction motor error |
Causes: | The pulse position detection got time-out twice continuously when the belt skew correction motor drives. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 2 Primary transfer belt unit replacement The belt skew correction motor of the belt skew correction sensor is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2810 |
Description: | Waste toner motor error |
Causes: | The steady-state speed error, FG pulse abnormal stop, or the abnormal motor drive is detected when reading the error signal from the motor at every 1s. |
Remedy: | 1 Checking the waste toner box The waste toner box is not properly installed. Reinstall the waste toner box. Detaching and reattaching the waste toner box 2 Checking the waste toner motor The waste toner motor does not operate properly. Check if the waste toner motor has no excessive load, and repair it. 3 Checking the drive gear The drive gear does not rotate properly. Check if the excessive load is not applied to the drive gears by rotating the gears, and clean the drive gears and the bushing, etc. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Waste toner motor - Front PWB?• Front PWB - Engine PWB Wiring diagram 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2820 |
Description: | Transfer motor steady-state error |
Causes: | The steady-state speed error or the abnormal motor drive is detected when reading the FG signal from the transfer motor at every 1s. |
Remedy: | 1 Checking the transfer motor The drive transmission from the transfer motor is faulty. Execute U030 [Belt Meand] and check if the drive gears, roller and the belt have no excessive load by rotating them. Then, clean the drive section of the primary transfer belt unit. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Transfer motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 3 Checking the primary transfer belt unit The primary transfer belt unit is faulty. Reinstall the primary transfer belt unit. If not repaired, replace it. Detaching and reattaching the primary transfer belt unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 6 Checking the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2840 |
Description: | Transfer cleaning motor error |
Causes: | 1. The ready signal does not turn on when passing 2s after the transfer cleaning motor starts. 2. The ready signal turns off for 1s continuously after the transfer cleaning motor is stable. |
Remedy: | 1 Checking the primary transfer belt unit The primary transfer belt unit is not properly installed. Reattach the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 2 Cleaning the primary transfer cleaning section The roller in the primary transfer cleaning section does not rotate properly. Remove the waste toner remaining in the primary transfer cleaning section. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Transfer cleaning motor - Relay connector of the primary transfer belt unit • Relay connector of the primary transfer belt unit - Engine PWB Wiring diagram 4 Checking the transfer cleaning motor The transfer cleaning motor is not properly attached or faulty. Reattach or replace the transfer cleaning motor. 5 Primary transfer belt unit replacement The primary transfer cleaning section is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2850 |
Description: | Transfer motor FG signal error |
Causes: | The FG signal from the transfer motor is read at every 1s and the abnormal FG pulse stop is detected |
Remedy: | 1 Checking the drive components The drive transmission from the transfer motor is faulty. Execute U030 [Belt Meand] and check if the drive gears, roller and the belt have no excessive load by rotating them. Then, clean the drive section of the primary transfer belt unit. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Transfer motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 3 Checking the primary transfer belt unit The primary transfer belt unit is faulty. Reinstall the primary transfer belt unit. If not repaired, replace it. Detaching and reattaching the primary transfer belt unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2860 |
Description: | Belt speed sensor error (For the internal count) |
Causes: | The pulse signal from the belt speed sensor does not output for 2s continuously. |
Remedy: | 1 Checking the drive components The drive transmission from the transfer motor is faulty. Execute U030 [Belt Meand] and check if the drive gears, roller and the belt have no excessive load by rotating them. Then, clean the drive section of the primary transfer belt unit. Executing U030 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Belt speed sensor - Relay connector of the primary transfer belt unit • Relay connector of the primary transfer belt unit - Engine PWB Wiring diagram 3 Checking the primary transfer belt unit The primary transfer belt unit is not properly installed, or the belt speed sensor is faulty. Reinstall the primary transfer belt unit. If not repaired, replace it. Detaching and reattaching the primary transfer belt unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C2870 |
Description: | Waste toner collection motor error |
Causes: | The steady-state speed error, FG pulse abnormal stop, or the abnormal motor drive is detected when reading the error signal from the motor at every 1s. |
Remedy: | 1 Checking the waste toner collection motor The waste toner collection motor does not properly operate. Check if the waste toner collection motor has no excessive load, and repair it. 2 Checking the drive gear The drive gear does not rotate properly. Check if the excessive load is not applied to the drive gears by rotating the gears, and clean the drive gears and the bushing, etc. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Waste toner collection motor - Front PWB?• Front PWB - Engine PWB Wiring diagram 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3100 |
Description: | Carriage error |
Causes: | When turning the power on or finishing originals scan through the scanner, the alignment of the home position sensor (turning on / off the sensor) fails and the error is detected. Then, the error is detected twice continuously even the initial operation is executed. |
Remedy: | 1 Unlocking the scanner mirror frame The scanner mirror frame is not unlocked. Unlock the scanner mirror frame (lamp unit assy). Unlocking the scanner mirror frame 2 Checking the scanner movement A load is applied to the scanner movement. Check the operation of the lamp by U073 or manually moving it. If there is an excess load, check if there are any foreign objects on the optical wire or optical wire drum and clean it. After that, apply grease on the scanner rail. Detaching and reattaching the scanner wires 3 Checking the scanner wires The scanner wires are dirty or come off. Clean and reattach the scanner wires. Detaching and reattaching the scanner wires 4 Checking the scanner motor The scanner motor is faulty. Reattach the scanner motor and reconnect the connector. If not repaired, replace it. 5 Checking the belt tension of the scanner motor A load is applied to the scanner movement since the belt tension is improper. Adjust the scanner motor belt tension properly. 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Scanner motor - Engine PWB Wiring diagram 7 Checking the home position sensor The home position sensor is not properly attached. Reattach the home position sensor. 8 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Home position sensor - Engine PWB Wiring diagram 9 Replacing the home position sensor The home position sensor is faulty. Replace the home position sensor. 10 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 11 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3200 |
Description: | LED lamp startup error |
Causes: | The white reference data acquired by lighting the LED lamp at the initial operation does not reach the specified value. Or, the light amount detected by the CCD PWB is not enough. (2 or more LED lamps do not light. The light does not reach the CCD PWB due to condensation.) |
Remedy: | 1 Checking the LED lamp The LED lamp does not light. Execute U061 [CCD] and check if the LED lamp is lit. If not, replace the lamp unit. After that, execute U411 [Table(ChartA)]. Detaching and reattaching the lamp unit 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • CCD PWB - Engine PWB • LED PWB - CCD PWB Wiring diagram 3 Checking the mirror The mirror or lens is frosted due to condensation. Clean the mirrors. If the condensation at the scanner section is resolved naturally by opening the document processor or the platen cover, turn the power switch off and on. 4 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3210 |
Description: | CIS lamp error |
Causes: | Input data did not exceed the threshold for 5s when the CIS lamp was ON. |
Remedy: | 1 Releasing the partial operation The partial operation is executed. Execute resetting the partial operation at U906. Executing U906 2 Checking the DPCIS The CIS lamp does not light. Execute U061 [CIS] and check if the CIS lamp is lit. If not, replace the DPCIS and execute U411. Detaching and reattaching the CIS 3 Cleaning the CIS glass and the CIS roller The CIS glass or the CIS roller is dirty. Clean the CIS glass and the CIS roller. 4 Checking the DPSHD PWB The DPSHD PWB is not properly connected. Reconnect the DPSHD PWB to the DPCIS. 5 Checking the connection The connector is not properly connected. Or, the SATA cable or the wire is faulty. Clean the following SATA cable or the terminal of the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • DPSHD PWB - DP relay PWB • DP relay PWB - Main PWB • DP relay PWB - DP main PWB • DP main PWB - Engine PWB Wiring diagram 6 Firmware upgrade The firmware is not the latest version. Upgrade the DP firmware to the latest version. Firmware Update 7 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. 8 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. 9 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB 10 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. Detaching and reattaching the DP main PWB 11 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3300 |
Description: | CCD AGC error (For the internal count) |
Causes: | Brightness of the LED lamp is darker while one of the LED lamp does not turn on or brighter than expected when processing the AGC for the CCD lamp. |
Remedy: | 1 Checking the LED lamp The LED lamp is faulty. Check if the LED lamp lights by executing U061 [CCD]. If it does not light, replace the lamp unit and execute U411 [Table (ChartA) ]. Detaching and reattaching the lamp unit 2 Cleaning the backside of the contact glass The white reference sheet is dirty. Clean the white reference sheet at the backside of the contact glass. Detaching and reattaching the contact glass 3 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is peeled off, deformed or the FFC is broken, replace the FFC. • LED PWB - CCD PWB • CCD PWB - Engine PWB Wiring diagram 4 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 5 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3310 |
Description: | CIS AGC error (For the internal count) |
Causes: | The CIS could not get the normal white reference value after the AGC retry. |
Remedy: | 1 Releasing the partial operation The partial operation is executed. Execute resetting the partial operation at U906. Executing U906 2 Cleaning the CIS glass and the CIS roller The CIS glass or the CIS roller is dirty. Clean the CIS glass and the CIS roller. 3 Firmware upgrade The firmware is not the latest version. Upgrade the DP firmware to the latest version. Firmware Update 4 Checking the DPSHD PWB The DPSHD PWB is not properly connected. Reconnect the DPSHD PWB to the DPCIS. 5 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. 6 Replacing the DPCIS The DPCIS is faulty. Replace the DPCIS, and then execute U091 and U411. Detaching and reattaching the DPCIS 7 Checking the connection The connector is not properly connected. Or, the SATA cable is faulty. Clean the terminal of the following SATA cable connector and reconnect the connectors. If there is no continuity, replace the SATA cable. • DPSHD PWB - DP relay PWB • DP relay PWB - Main PWB Wiring diagram 8 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. 9 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB |
Error code: | C3500 |
Description: | Communication error between the scanner and the ASIC |
Causes: | The communication error is detected during the communication between the scanner ASIC and the scanner CPU. |
Remedy: | 1 Resetting the main power ASIC does not properly operate. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware to the latest version. Firmware Update 3 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3600 |
Description: | Scanner sequence error |
Causes: | The program internal processing error of the scanner sequence occurs. |
Remedy: | 1 Executing U021 The memory operation is faulty. Execute U021. Executing U021 2 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3800 |
Description: | AFE error |
Causes: | The writing data and the reading data mismatch 3 times continuously when writing. No response is not returned from AFE for 100ms. |
Remedy: | 1 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is peeled off, deformed or the FFC is broken, replace the FFC. • CCD PWB - Engine PWB Wiring diagram 2 Replacing the lens unit The CCD PWB is faulty. Replace the lens unit and execute U411. Detaching and reattaching the lens unit 3 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C3900 |
Description: | Scanner backup memory read / write error (Engine EEPOM) |
Causes: | The read-back value of the engine EEPROM differs. |
Remedy: | 1 Resetting the main power The EEPROM on the engine PWB does not operate properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the EEPROM on the engine PWB The EEPROM is not properly installed. Reattach the EEPROM on the engine PWB. Detaching and reattaching the EEPROM 3 Checking the EEPROM on the engine PWB The EEPROM is faulty. Replace the EEPROM on the engine PWB and execute U004. Detaching and reattaching the EEPROM 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4001 |
Description: | Polygon motor synchronization error |
Causes: | The ready signal is not at the L level when passing 30s after the polygon motor drive starts. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Polygon motor - Engine PWB Wiring diagram 2 Checking the polygon motor The polygon motor does not rotate properly. Check the rotation sound of the polygon motor, and reattach or replace the LSU if it does not rotate properly. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C4002 |
Description: | Polygon motor C synchronization error |
Causes: | The ready signal is not at the L level when passing 30s after the polygon motor drive starts. |
Remedy: | 1 Checking the connection The connector or the FFC terminal is not properly connected, or the wire or the FFC is faulty. Reconnect the following wire connectors and reconnect the FFC. If there is no continuity, replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. • Polygon motor C - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the polygon motor The polygon motor does not rotate properly. Check the rotation sound of the polygon motor, and reattach or replace the LSU if it does not rotate properly. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4003 |
Description: | Polygon motor M synchronization error |
Causes: | The ready signal is not at the L level when passing 30s after the polygon motor drive starts. |
Remedy: | 1 Checking the connection The connector or the FFC terminal is not properly connected, or the wire or the FFC is faulty. Reconnect the following wire connectors and reconnect the FFC. If there is no continuity, replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. • Polygon motor M - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the polygon motor The polygon motor does not rotate properly. Check the rotation sound of the polygon motor, and reattach or replace the LSU if it does not rotate properly. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4004 |
Description: | Polygon motor Y synchronization error |
Causes: | The ready signal is not at the L level when passing 30s after the polygon motor drive starts. |
Remedy: | 1 Checking the connection The connector or the FFC terminal is not properly connected, or the wire or the FFC is faulty. Reconnect the following wire connectors and reconnect the FFC. If there is no continuity, replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. • Polygon motor Y - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the polygon motor The polygon motor does not rotate properly. Check the rotation sound of the polygon motor, and reattach or replace the LSU if it does not rotate properly. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4101 |
Description: | BD initialization error |
Causes: | The BD signal was not detected for 1s after driving the polygon motor. |
Remedy: | 1 Checking the connection The connector or the FFC terminal is not properly connected, or the wire or the FFC is faulty. Reconnect the following wire connectors and reconnect the FFC. If there is no continuity, replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. • APC PWB - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C4102 |
Description: | BD initialization error C |
Causes: | The BD signal was not detected for 1s after driving the polygon motor. |
Remedy: | 1 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB C - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4103 |
Description: | BD initialization error M |
Causes: | The BD signal was not detected for 1s after driving the polygon motor. |
Remedy: | 1 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB M - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4104 |
Description: | BD initialization error Y |
Causes: | The BD signal was not detected for 1s after driving the polygon motor. |
Remedy: | 1 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB Y - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4201 |
Description: | BD steady-state error |
Causes: | The BD signal is not detected during the laser lighting. |
Remedy: | 1 Checking the connection The connector or the FFC terminal is not properly connected, or the wire or the FFC is faulty. Reconnect the following wire connectors and reconnect the FFC. If there is no continuity, replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. • APC PWB - LSU relay PWB • LSU relay PWB - Engine PWB 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C4202 |
Description: | BD steady-state error C |
Causes: | The BD signal is not detected during the laser lighting. |
Remedy: | 1 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB C - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4203 |
Description: | BD steady-state error M |
Causes: | The BD signal is not detected during the laser lighting. |
Remedy: | 1 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB M - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4204 |
Description: | BD steady-state error Y |
Causes: | The BD signal is not detected during the laser lighting. |
Remedy: | 1 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB Y - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The BD sensor or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4300 |
Description: | Polygon motor phase adjustment error (For the internal count) |
Causes: | The ASIC does not complete the phase adjustment for 2s after detecting the BD signal. |
Remedy: | 1 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 2 Checking the LSU The polygon motor, PD PWB or the laser diode is faulty. Reinstall or replace the LSU while paying attention to the static electricity. Detaching and reattaching the LSU 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4600 |
Description: | LSU cleaning motor error |
Causes: | The LSU cleaning motor lock-up is detected. Or, the motor continues shifting for 8s or more in the same direction. |
Remedy: | 1 Executing the Laser Scanner Cleaning The LSU cleaning drive gear and the cleaning pad have the load and so they are not shifted smoothly. Execute Laser Scanner Cleaning. 2 Cleaning the LSU cleaning drive gear and the cleaning pad The LSU cleaning drive gear and the cleaning pad have the load and so they are not shifted smoothly. Clean the LSU cleaning drive gear and the cleaning pad. 3 Replacing the LSU The LSU cleaning drive gear, cleaning wire or pad is deformed or faulty. Replace the LSU. Detaching and reattaching the LSU 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • LSU cleaning motor - Engine PWB Wiring diagram 5 Checking the LSU cleaning motor The LSU cleaning motor is not properly attached or faulty. Reattach the LSU cleaning motor. If not repaired, replace the motor. 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4701 |
Description: | VIDEO ASIC device error 1 |
Causes: | Communication with VIDEO ASIC failed 10 times continuously. (After writing to the VIDEO ASIC, when scanned from the same address, the value does not match.) |
Remedy: | 1 Resetting the main power The ASIC operation on the engine is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C4702 |
Description: | VIDEO ASIC device error 2 |
Causes: | Communication with VIDEO ASIC (2) failed 10 times continuously. (Value mismatch error when scanning from the same address after writing on the VIDEO ASIC.) |
Remedy: | 1 Resetting the main power The ASIC operation on the engine is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C5101 |
Description: | Main high-voltage error |
Causes: | When the flow-in current with the Vpp variable in 3 steps is measured during the Vpp adjustment, difference between the zero current value and 2nd step current value is less than the reference value. (The Vpp is adjusted at warm-up, before calibration or before print when the in-machine temperature varies largely from the one at the last time Vpp adjustment.) |
Remedy: | 1 Reinstalling the high-voltage PWB Proper electric current does not flow as the main charger roller contact is not properly grounded. Repair the main charger roller contact (wire spring) inside the high-voltage PWB so that it firmly contacts. Detaching and reattaching the high-voltage PWB 2 Checking the drum unit and the developer unit The drum or the drum screw does not properly rotate due to the excessive load. Check if the drum or the drum screw rotates manually, and if not, replace drum unit. Detaching and reattaching the drum unit 3 Replacing the drum motor The drum motor is faulty. Replace the drum motor. Detaching and reattaching the drum drive unit 4 Checking the main charger unit Proper electric current does not flow as the foreign objects are adhered on the high-voltage contact of the main charger roller unit. Clean the high-voltage contact of the main charger roller unit and apply conductive grease to the roller shaft. Detaching and reattaching the main charger roller unit 5 Replacing the main charger roller unit Proper electric current does not flow due to deformation or damage of the high-voltage contact of the main charger roller unit. Replace the main charger roller unit and execute U930. Detaching and reattaching the main charger roller unit 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity.• High-voltage PWB - Engine PWB Wiring diagram 7 Replacing the high-voltage PWB The high-voltage PWB is faulty. Replace the high-voltage PWB. Detaching and reattaching the high-voltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C5102 |
Description: | Main high-voltage error C |
Causes: | When the flow-in current with the Vpp variable in 3 steps is measured during the Vpp adjustment, difference between the zero current value and 2nd step current value is less than the reference value. (The Vpp is adjusted at warm-up, before calibration or before print when the in-machine temperature varies largely from the one at the last time Vpp adjustment.) |
Remedy: | 1 Reinstalling the main highvoltage PWB Proper electric current does not flow as the main charger roller contact is not properly grounded. Correct the main charger roller contact (wire spring) at the inner side of the main high-voltage PWB so that it is firmly grounded. Detaching and reattaching the main highvoltage PWB 2 Checking the drum unit and the developer unit The drum or the drum screw is not rotated properly due to the excessive load. Check if the drum or the drum screw is rotated manually, and replace the drum unit if not rotated. Detaching and reattaching the drum unit 3 Replacing drum motor C Drum motor C is faulty. Replace drum motor C. Detaching and reattaching drum drive unit K and drum drive unit MCY 4 Checking the main charger unit Proper electric current does not flow as the foreign objects are adhered on the high-voltage contact of the main charger roller unit. Clean the high-voltage contact of the main charger roller unit and apply conductive grease to the roller shaft. Detaching and reattaching the main charger roller unit 5 Replacing the main charger roller unit Proper electric current does not flow due to deformation or damage of the high-voltage contact of the main charger roller unit. Replace the main charger roller unit and execute U930. Detaching and reattaching the main charger roller unit 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity. • Main highvoltage PWB - Engine PWB Wiring diagram 7 Replacing the main highvoltage PWB The main high-voltage PWB is faulty. Replace the main high-voltage PWB. Detaching and reattaching the main highvoltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C5103 |
Description: | Main high-voltage error M |
Causes: | When the flow-in current with the Vpp variable in 3 steps is measured during the Vpp adjustment, difference between the zero current value and 2nd step current value is less than the reference value. (The Vpp is adjusted at warm-up, before calibration or before print when the in-machine temperature varies largely from the one at the last time Vpp adjustment.) |
Remedy: | 1 Reinstalling the main highvoltage PWB Proper electric current does not flow as the main charger roller contact is not properly grounded. Correct the main charger roller contact (wire spring) at the inner side of the main high-voltage PWB so that it is firmly grounded. Detaching and reattaching the main highvoltage PWB 2 Checking the drum unit and the developer unit The drum or the drum screw is not rotated properly due to the excessive load. Check if the drum or the drum screw is rotated manually, and replace the drum unit if not rotated. Detaching and reattaching the drum unit 3 Replacing drum motor M Drum motor M is faulty. Replace drum motor M. Detaching and reattaching drum drive unit K and drum drive unit MCY 4 Checking the main charger unit Proper electric current does not flow as the foreign objects are adhered on the high-voltage contact of the main charger roller unit. Clean the high-voltage contact of the main charger roller unit and apply conductive grease to the roller shaft. Detaching and reattaching the main charger roller unit 5 Replacing the main charger roller unit Proper electric current does not flow due to deformation or damage of the high-voltage contact of the main charger roller unit. Replace the main charger roller unit and execute U930. Detaching and reattaching the main charger roller unit 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity. • Main highvoltage PWB - Engine PWB Wiring diagram 7 Replacing the main highvoltage PWB The main high-voltage PWB is faulty. Replace the main high-voltage PWB. Detaching and reattaching the main highvoltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C5104 |
Description: | Main high-voltage error Y |
Causes: | When the flow-in current with the Vpp variable in 3 steps is measured during the Vpp adjustment, difference between the zero current value and 2nd step current value is less than the reference value. (The Vpp is adjusted at warm-up, before calibration or before print when the in-machine temperature varies largely from the one at the last time Vpp adjustment.) |
Remedy: | 1 Reinstalling the main highvoltage PWB Proper electric current does not flow as the main charger roller contact is not properly grounded. Correct the main charger roller contact (wire spring) at the inner side of the main high-voltage PWB so that it is firmly grounded. Detaching and reattaching the main highvoltage PWB 2 Checking the drum unit and the developer unit The drum or the drum screw is not rotated properly due to the excessive load. Check if the drum or the drum screw is rotated manually, and replace the drum unit if not rotated. Detaching and reattaching the drum unit 3 Replacing drum motor Y Drum motor Y is faulty. Replace drum motor Y. Detaching and reattaching drum drive unit K and drum drive unit MCY 4 Checking the main charger unit Proper electric current does not flow as the foreign objects are adhered on the high-voltage contact of the main charger roller unit. Clean the high-voltage contact of the main charger roller unit and apply conductive grease to the roller shaft. Detaching and reattaching the main charger roller unit 5 Replacing the main charger roller unit Proper electric current does not flow due to deformation or damage of the high-voltage contact of the main charger roller unit. Replace the main charger roller unit and execute U930. Detaching and reattaching the main charger roller unit 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity. • Main highvoltage PWB - Engine PWB Wiring diagram 7 Replacing the main highvoltage PWB The main high-voltage PWB is faulty. Replace the main high-voltage PWB. Detaching and reattaching the main highvoltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C5131 |
Description: | Transfer high-voltage error K (For the internal count) |
Causes: | During the feedback adjustment, the electric current is detected at -50ìA or more (absolute value) which is the upper limit by impressing -200V or, at -10ìA or less (absolute value) which is the lower limit by impressing -3500V. |
Remedy: | 1 Checking the transfer motor The transfer motor operation is faulty. Execute U030 [Belt Meand] and check the transfer motor operation. If the motor does not properly operate, reattach it and reconnect the connector. If not repaired, replace the motor. Executing U030 2 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed. Reinstall the primary transfer belt unit so that the high-voltage contact of the primary transfer roller is firmly connected. Detaching and reattaching the primary transfer belt unit 3 Primary transfer belt unit replacement The primary transfer belt does not properly rotate. If the primary transfer belt does not rotate manually, replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 4 Checking the high-voltage contact Foreign objects adhere on the high-voltage contacts of the primary transfer roller, and so, proper electric current does not flow. Clean the high-voltage contact of the primary transfer roller, and apply conductive grease to the roller shaft. 5 Reinstalling the transfer high-voltage PWB The transfer high-voltage PWB is not properly attached. Reinstall the transfer highvoltage PWB. Detaching and reattaching the transfer high-voltage PWB 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Transfer high-voltage PWB - Engine PWB • Transfer high-voltage PWB - Feed PWB Wiring diagram 7 Replacing the transfer high-voltage PWB The transfer high-voltage PWB is faulty. Replace the transfer highvoltage PWB. Detaching and reattaching the transfer high-voltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the feed PWB The feed PWB does not output 24V. Replace the feed PWB. 10 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C5132 |
Description: | Transfer high-voltage error C (For the internal count) |
Causes: | During the feedback adjustment, the electric current is detected at -50ìA or more (absolute value) which is the upper limit by impressing -200V or, at -10ìA or less (absolute value) which is the lower limit by impressing -3500V. |
Remedy: | 1 Checking the transfer motor The transfer motor operation is faulty. Execute U030 [Belt Meand] and check the transfer motor operation. If the motor does not properly operate, reattach it and reconnect the connector. If not repaired, replace the motor. Executing U030 2 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed. Reinstall the primary transfer belt unit so that the high-voltage contact of the primary transfer roller is firmly connected. Detaching and reattaching the primary transfer belt unit 3 Primary transfer belt unit replacement The primary transfer belt does not properly rotate. If the primary transfer belt does not rotate manually, replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 4 Checking the high-voltage contact Foreign objects adhere on the high-voltage contacts of the primary transfer roller, and so, proper electric current does not flow. Clean the high-voltage contact of the primary transfer roller, and apply conductive grease to the roller shaft. 5 Reinstalling the transfer high-voltage PWB The transfer high-voltage PWB is not properly attached. Reinstall the transfer highvoltage PWB. Detaching and reattaching the transfer high-voltage PWB 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Transfer high-voltage PWB - Engine PWB • Transfer high-voltage PWB - Feed PWB Wiring diagram 7 Replacing the transfer high-voltage PWB The transfer high-voltage PWB is faulty. Replace the transfer highvoltage PWB. Detaching and reattaching the transfer high-voltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the feed PWB The feed PWB does not output 24V. Replace the feed PWB. 10 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C5133 |
Description: | Transfer high-voltage error M (For the internal count) |
Causes: | During the feedback adjustment, the electric current is detected at -50ìA or more (absolute value) which is the upper limit by impressing -200V or, at -10ìA or less (absolute value) which is the lower limit by impressing -3500V. |
Remedy: | 1 Checking the transfer motor The transfer motor operation is faulty. Execute U030 [Belt Meand] and check the transfer motor operation. If the motor does not properly operate, reattach it and reconnect the connector. If not repaired, replace the motor. Executing U030 2 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed. Reinstall the primary transfer belt unit so that the high-voltage contact of the primary transfer roller is firmly connected. Detaching and reattaching the primary transfer belt unit 3 Primary transfer belt unit replacement The primary transfer belt does not properly rotate. If the primary transfer belt does not rotate manually, replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 4 Checking the high-voltage contact Foreign objects adhere on the high-voltage contacts of the primary transfer roller, and so, proper electric current does not flow. Clean the high-voltage contact of the primary transfer roller, and apply conductive grease to the roller shaft. 5 Reinstalling the transfer high-voltage PWB The transfer high-voltage PWB is not properly attached. Reinstall the transfer highvoltage PWB. Detaching and reattaching the transfer high-voltage PWB 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Transfer high-voltage PWB - Engine PWB • Transfer high-voltage PWB - Feed PWB Wiring diagram 7 Replacing the transfer high-voltage PWB The transfer high-voltage PWB is faulty. Replace the transfer highvoltage PWB. Detaching and reattaching the transfer high-voltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the feed PWB The feed PWB does not output 24V. Replace the feed PWB. 10 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C5134 |
Description: | Transfer high-voltage error Y (For the internal count) |
Causes: | During the feedback adjustment, the electric current is detected at -50ìA or more (absolute value) which is the upper limit by impressing -200V or, at -10ìA or less (absolute value) which is the lower limit by impressing -3500V. |
Remedy: | 1 Checking the transfer motor The transfer motor operation is faulty. Execute U030 [Belt Meand] and check the transfer motor operation. If the motor does not properly operate, reattach it and reconnect the connector. If not repaired, replace the motor. Executing U030 2 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed. Reinstall the primary transfer belt unit so that the high-voltage contact of the primary transfer roller is firmly connected. Detaching and reattaching the primary transfer belt unit 3 Primary transfer belt unit replacement The primary transfer belt does not properly rotate. If the primary transfer belt does not rotate manually, replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 4 Checking the high-voltage contact Foreign objects adhere on the high-voltage contacts of the primary transfer roller, and so, proper electric current does not flow. Clean the high-voltage contact of the primary transfer roller, and apply conductive grease to the roller shaft. 5 Reinstalling the transfer high-voltage PWB The transfer high-voltage PWB is not properly attached. Reinstall the transfer highvoltage PWB. Detaching and reattaching the transfer high-voltage PWB 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Transfer high-voltage PWB - Engine PWB • Transfer high-voltage PWB - Feed PWB Wiring diagram 7 Replacing the transfer high-voltage PWB The transfer high-voltage PWB is faulty. Replace the transfer highvoltage PWB. Detaching and reattaching the transfer high-voltage PWB 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the feed PWB The feed PWB does not output 24V. Replace the feed PWB. 10 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6000 |
Description: | IH heating error 1 |
Causes: | The fuser center thermistor temperature does not reach 100°C / 212°F when passing 60s since warm-up starts. Or, the ready display temperature is not detected when passing 420s since the fuser center thermistor temperature reaches 100°C / 212°F during warm-up. |
Remedy: | 1 Executing U169 The IH setting mismatches the power source specification. Set the fuser destination same as the IH PWB voltage at U169. Executing U169 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature cannot be detected properly due to the broken thermostat or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the current PWB The current PWB is faulty. Replace the current PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. |
Error code: | C6020 |
Description: | Fuser center thermistor high temperature error |
Causes: | The fuser center thermistor detects 240°C / 464°F or more for 1s. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the thermistor error, etc. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6030 |
Description: | Fuser center thermistor broken |
Causes: | The output from the fuser center thermistor is under 20°C / 68°F level during warm-up. Or, the temperature detected at the fuser center thermistor does not change for 10s after turning the fuser heater on. |
Remedy: | 1 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 5 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6040 |
Description: | Fuser heater error |
Causes: | The fuser center thermistor outputs the abnormal value for 1s continuously. |
Remedy: | 1 Changing the wall outlet The power voltage descends by 10% or more of the rated voltage when printing. Connect the power cord to a different wall outlet if the power supply voltage descends by 10% or more of the rated voltage. 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6050 |
Description: | Fuser center thermistor low temperature error |
Causes: | The fuser center thermistor detects less than 100°C / 212°F for 1s after warm-up, or during print or standby. |
Remedy: | 1 Changing the wall outlet The power voltage descends by 10% or more of the rated voltage when printing. Connect the power cord to a different wall outlet if the power supply voltage descends by 10% or more of the rated voltage. 2 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 3 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 6 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 10 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 11 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit |
Error code: | C6100 |
Description: | Fuser heater broken (For the internal count) |
Causes: | The fuser press thermistor temperature detected does not reach the control temperature within 480s after shifting to the low power mode. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the thermistor error, etc. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6120 |
Description: | Fuser press thermistor high temperature error |
Causes: | The fuser press thermistor detects 210°C / 410°F or more for 1s. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the thermistor error, etc. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6130 |
Description: | Fuser press thermistor broken |
Causes: | The detection temperature of the fuser press thermistor does not reach 30°C / 86°F within 60s since warm-up starts. |
Remedy: | 1 Removing foreign material There are foreign objects between the fuser press thermistor and the press roller. Or, the foreign objects are adhered on the press roller. Remove foreign objects if any on the press roller. Then, reinstall the fuser unit. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 5 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6150 |
Description: | Fuser press thermistor low temperature error |
Causes: | The fuser press thermistor detects less than 30°C / 86°F for 1s after warm-up. |
Remedy: | 1 Removing foreign material There are foreign objects between the fuser press thermistor and the press roller. Or, the foreign objects are adhered on the press roller. Remove foreign objects if any on the press roller. Then, reinstall the fuser unit. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 9 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB 10 Replacing the IH unit The IH unit is faulty. Replace the IH unit. |
Error code: | C6200 |
Description: | Fuser IH ends heating error |
Causes: | The temperature detected at the fuser edge thermistor does not reach 100°C / 212°F within 60s since warmup starts. The temperature detected at the fuser edge thermistor does not reach the ready display temperature within 60s since it reaches 100°C / 212°F during warm-up. |
Remedy: | 1 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 5 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. 6 Checking the IH core motor The small size shield plate of the IH core motor does not shift to the proper position. Execute U030 [IH Core] and check the IH core motor rotation. If the motor does not properly operate, repair it. Executing U030 7 Replacing the current PWB The current PWB is faulty. Replace the current PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 11 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 12 Replacing the IH unit The IH unit is faulty. Replace the IH unit. |
Error code: | C6220 |
Description: | Fuser edge thermistor high temperature error |
Causes: | The fuser edge thermistor detects 240°C / 464°F or more for 1s. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature is not properly detected due to the broken wire or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Checking the IH core motor The small size shield plate of the IH core motor does not shift to the proper position. Execute U030 [IH Core] and check the IH core motor rotation. If the motor does not properly operate, repair it. 8 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit 9 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 10 Checking the fuser edge fan motor Dust accumulates on the fuser edge fan motor, or the motor is not properly attached. Clean the front / rear fuser edge fan motors and reattach them. Fan Motors Attachable Direction |
Error code: | C6230 |
Description: | Fuser edge thermistor broken |
Causes: | The fuser edge thermistor detects 37°C / 98°or less for 1s when the fuser center thermistor detects 100°C / 212°F or more for 1s during warm-up. |
Remedy: | 1 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 5 Replacing the fuser unit The temperature cannot be detected properly due to the heater broken or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Checking the IH core motor The small size shield plate of the IH core motor does not shift to the proper position. Execute U030 [IH Core] and check the IH core motor rotation. If the motor does not properly operate, repair it. 9 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 10 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit 11 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. |
Error code: | C6250 |
Description: | Fuser edge thermistor low temperature error |
Causes: | The fuser edge thermistor detects less than 100°C / 212°F for 1s during print or standby. |
Remedy: | 1 Removing foreign material There is foreign material between the fuser unit and the IH unit. Or, foreign material adheres on the heat roller. Remove foreign objects if they are in between the fuser unit and the IH unit or on the heat roller. After that, reinstall the fuser unit. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 5 Replacing the fuser unit The temperature cannot be detected properly due to the heater broken or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 7 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 8 Checking the IH core motor The small size shield plate of the IH core motor does not shift to the proper position. Execute U030 [IH Core] and check the IH core motor rotation. If the motor does not properly operate, repair it. Detaching and reattaching the fuser IH PWB 9 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB Wiring diagram 10 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit 11 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6320 |
Description: | Fuser A3 thermistor high temperature error |
Causes: | The fuser A3 thermistor detects 215°C / 419°F or more for 1s. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 4 Replacing the fuser unit The temperature is not properly detected due to the wire short-circuit or the thermistor error in the fuser unit. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH unit The IH unit is faulty. Replace the IH unit. 8 Checking the fuser edge fan motor Dust accumulates on the fuser edge fan motor, or the motor is not properly attached. Clean the front / rear fuser edge fan motors and reattach them. Fan Motors Attachable Direction |
Error code: | C6330 |
Description: | Fuser A3 thermistor broken |
Causes: | The fuser A3 thermistor detects 20°C / 68°F or less when the fuser center thermistor detects 100°C / 212°F or more during warm-up. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB • Connector of the fuser unit - IH PWB • IH PWB - Engine PWB • IH PWB - Feed PWB • IH PWB - IH unit Wiring diagram 4 Replacing the fuser unit The temperature cannot be detected properly due to the heater broken or the thermistor error. Replace the fuser unit. Detaching and reattaching the fuser unit 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit 8 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB |
Error code: | C6410 |
Description: | Fuser unit type mismatch error |
Causes: | "Unit Identification" code in the EEPROM of the fuser unit does not match the main unit. The fuser unit for other model is installed. |
Remedy: | 1 Replacing the fuser unit The fuser unit for other models is installed. Install the fuser unit for the applicable models. Detaching and reattaching the fuser unit 2 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB Wiring diagram 5 Replacing the fuser unit The fuser unit is faulty. Replace the fuser unit. Detaching and reattaching the fuser unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6600 |
Description: | Fuser belt rotation error |
Causes: | The belt rotation pulse is not input for 1.8s continuously. |
Remedy: | 1 Reinstalling the fuser unit The fuser unit is not properly installed. Check if the fuser rollers rotate manually. After checking it, reinstall the fuser unit while paying attention to the drive gears engagements. Detaching and reattaching the fuser unit 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB Wiring diagram 3 Replacing the fuser unit The fuser unit components such as the fuser belt, belt rotation detection mechanism or fuser belt sensor are faulty. Replace the fuser unit. Detaching and reattaching the fuser unit 4 Applying the grease The load increases due to the lack of grease on the bushing or the gears for the fuser motor. Execute U030 [Fuser] and check the fuser motor operation. If the motor does not smoothly rotate, apply grease to the bushing and the gears. Executing U030 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Fuser motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 6 Replacing the fuser drive gear The fuser drive gear is faulty. Replace the fuser drive gear. 7 Replacing the fuser motor The fuser motor is faulty. Replace the fuser motor. Detaching and reattaching the fuser drive unit 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 10 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. |
Error code: | C6610 |
Description: | Fuser release sensor error |
Causes: | 1. The fuser release sensor does not turn off when passing 5s from the instruction to the fuser release motor to reduce the fuser pressure. 2. The fuser release sensor does not turn on when passing 5s from the instruction to the fuser release motor to increase the fuser pressure. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, reinstall the fuser unit so that the connector is firmly connected. Detaching and reattaching the fuser unit 2 Checking the motor operation / connection The connector is not properly connected. Or, the wire is faulty. Execute U030 [Fuser Release] and check the fuser release motor operation. If the motor does not properly operate, clean the terminal of the following wire connectors and reconnect them. If there is no continuity, replace the wire. • Connector of the fuser unit - Engine PWB Wiring diagram 3 Replacing the fuser unit The fuser release motor or the fuser release sensor, etc. is faulty. Replace the fuser unit. Detaching and reattaching the fuser unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6620 |
Description: | IH core motor rotation error |
Causes: | 1. The IH core sensor does not turn on within 5s after the IH core motor drives while the IH core sensor is off at the operation of the home position detection. 2. The IH core sensor turning off and on is not detected within 5s after the IH core motor drives while the IH core sensor is on at the operation of the home position detection. |
Remedy: | 1 Checking the IH unit The connector of the IH unit is not properly connected. Check if the connector pins of the IH unit are bent, and correct them if bent. When there is no problem, reinstall the IH unit so that the connector is firmly connected. Detaching and reattaching the IH unit 2 Checking the IH core sensor The IH core sensor is not properly attached. Reattach the IH core sensor if it comes off. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH core motor and IH core sensor (IH unit ) - Front PWB?• Front PWB - Engine PWB Wiring diagram 4 Replacing the IH unit The IH core sensor or the IH core motor is faulty. Replace the IH unit. Detaching and reattaching the IH unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6740 |
Description: | IH PWB high temperature error |
Causes: | The IGBT temperature detected by the IH PWB is 115°C / 239°F or more for 1s continuously. |
Remedy: | 1 Checking the IH fan motor Dust accumulates on the IH fan motor. Clean the IH fan motor. The procedure of installing the fan motor. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH fan motor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 3 Replacing the IH fan motor The IH fan motor is faulty. Execute U037 [IH PWB] and check the IH fan motor operation. If the fan motor does not properly operate, replace it. Executing U037 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH PWB - Engine PWB • IH PWB - Feed PWB Wiring diagram 5 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 8 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. [C |
Error code: | C6760 |
Description: | Fuser IH input excessive electric current error |
Causes: | The input current of the IH PWB is 20A or more (120V) / 10A or more (220-240V) for 100ms continuously. |
Remedy: | 1 Checking the fuser unit The fuser belt is faulty. Detach the fuser unit and check if the fuser belt is not faulty. If there is any damage, replace the fuser unit. Detaching and reattaching the fuser unit 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB?• IH PWB - Engine PWB Wiring diagram 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 5 Replacing the IH unit The IH unit is faulty. Replace the IH unit. Detaching and reattaching the IH unit 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6770 |
Description: | IH low power error |
Causes: | The IH PWB detects 60% or less of the set power value for 120ms after the fuser heating starts. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH unit - IH PWB?• IH PWB - Engine PWB?• IH PWB - Feed PWB?• IH PWB - LVU Wiring diagram 2 Changing the input power The input power is improper. Change the input power. 3 Replacing the LVU The LVU is faulty. Replace the LVU. Detaching and reattaching the LVU 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB 6 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 7 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 8 Replacing the IH unit The IH unit is faulty. (The coil is broken.) Replace the IH unit. Detaching and reattaching the IH unit |
Error code: | C6910 |
Description: | Engine firmware unexpected error |
Causes: | 1. The engine stable control continued for one hour. 2. The feed motor does not drive when passing 3s or more while the drum motor or developer motor is driving. 3. The only high voltage remote signal turned on while the drum is stopped. 4. The main charge bias turned off while the developer bias turned on. |
Remedy: | 1 Resetting the main power The power startup delays. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 3 Checking the engine PWB The engine PWB is not properly attached. Or, the connector is not properly connected. Fix the engine PWB with the screw to make sure the grounding and reinsert the connector on the engine PWB all the way. Detaching and reattaching the engine PWB 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6920 |
Description: | IH core fan motor error |
Causes: | The lock-up is detected for 5s continuously while the fan motor is driving. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Execute U037 [IH Coil]. If the fan motor does not properly operate, clean the terminal of the following wire connectors and reconnect the connectors. Replace the wire when it has no continuity.• IH core fan motor - Front PWB?• Front PWB - Engine PWB Wiring diagram 2 Checking the IH core fan motor The IH core fan motor does not properly operate. Clean the IH core fan motor and remove foreign objects if adhered. If not repaired, replace the IH core fan motor. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6930 |
Description: | Rear fuser fan motor error |
Causes: | The lock-up is detected for 5s continuously while the fan motor is driving. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Execute U037 [Fuser Cooling]. If the fan motor does not properly operate, clean the terminal of the following wire connectors and reconnect the connectors. Replace the wire when it has no continuity.• Rear fuser fan motor - Engine PWB Wiring diagram 2 Checking the rear fuser fan motor The rear fuser fan motor does not properly operate. Clean the rear fuser fan motor, and remove the foreign objects if they adhere there. If not repaired, replace the fan motor. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6950 |
Description: | IH PWB communication error |
Causes: | The initial communication between the IH PWB and the engine PWB is not established. (10 times of retries are executed in 30ms interval.) |
Remedy: | 1 Resetting the main power The power startup delays. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • IH PWB - Engine PWB Wiring diagram 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • LVU - IH PWB Wiring diagram 4 Checking the power supply voltage The abnormal electric noise is mixed in the power supply voltage. Plug the power cord into another wall outlet. 5 Checking the LVU The fuse on the LVU is broken. Check the continuity of the fuse (F002) on the LVU. Then, replace the LVU if there is no continuity. Detaching and reattaching the LVU 6 Replacing the IH PWB The IH PWB is faulty. Replace the IH PWB. Detaching and reattaching the fuser IH PWB 7 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6960 |
Description: | Current PWB error Object: 120V (For the internal count) |
Causes: | The current detected is less than 1A for 5s continuously while the fuser power is directed at 500W or more during warm-up. (In case U169 [CT Mode] is set to ON.) |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Current PWB - Feed PWB?• Feed PWB - Engine PWB Wiring diagram 2 Replacing the current PWB The current PWB is faulty. Replace the current PWB. 3 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C6980 |
Description: | Fuser unit EEPROM error |
Causes: | The EEPROM in the fuser unit cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing the data. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data do not match 8 times continuously. |
Remedy: | 1 Reinstalling the fuser unit The connector of the fuser unit is not properly connected. Check if the pins of the connector of the fuser unit are not bent, and correct the pins if bent. If there is no problem at the pins, firmly connect the connector. Detaching and reattaching the fuser unit 2 Replacing the fuser unit The fuser unit is faulty. Replace the fuser unit. Detaching and reattaching the fuser unit 3 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C7001 |
Description: | Toner motor error |
Causes: | The lock-up is detected 5 times continuously at every 200ms and this continued 30 sets totally (5 times x 30). |
Remedy: | 1 Replacing the toner container The spiral in the toner container cannot rotate. Check the spiral in the toner container rotates manually. Then check each gear. If it is damaged, replace the toner container. Detaching and reattaching the toner container 2 Checking the toner container drive components The toner container drive parts does not properly operate, or have excessive load. Pull out the toner container and execute U135. Check if the drive gears can rotate smoothly and have no excessive load. If they are faulty, replace them. Executing U135 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Toner motor - Engine PWB Wiring diagram 4 Checking the toner motor The toner motor is faulty. Reattach the toner motor. If not repaired, replace the motor. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C7002 |
Description: | Toner motor C error |
Causes: | The lock-up is detected 5 times continuously at every 200ms and this continued 30 sets totally (5 times x 30). |
Remedy: | 1 Replacing the toner container The spiral in the toner container cannot rotate. Check the spiral in the toner container rotates manually. Then check each gear. If it is damaged, replace the toner container. Detaching and reattaching the toner container 2 Checking the toner container drive components The toner container drive parts does not properly operate, or have excessive load. Pull out the toner container and execute U135. Check if the drive gears can rotate smoothly and have no excessive load. If they are faulty, replace them. Executing U135 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Toner motor C - Engine PWB Wiring diagram 4 Checking the toner motor The toner motor is faulty. Reattach the toner motor. If not repaired, replace the motor. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C7003 |
Description: | Toner motor M error |
Causes: | The lock-up is detected 5 times continuously at every 200ms and this continued 30 sets totally (5 times x 30). |
Remedy: | 1 Replacing the toner container The spiral in the toner container cannot rotate. Check the spiral in the toner container rotates manually. Then check each gear. If it is damaged, replace the toner container. Detaching and reattaching the toner container 2 Checking the toner container drive components The toner container drive parts does not properly operate, or have excessive load. Pull out the toner container and execute U135. Check if the drive gears can rotate smoothly and have no excessive load. If they are faulty, replace them. Executing U135 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Toner motor M - Engine PWB Wiring diagram 4 Checking the toner motor The toner motor is faulty. Reattach the toner motor. If not repaired, replace the motor. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C7004 |
Description: | Toner motor Y error |
Causes: | The lock-up is detected 5 times continuously at every 200ms and this continued 30 sets totally (5 times x 30). |
Remedy: | 1 Replacing the toner container The spiral in the toner container cannot rotate. Check the spiral in the toner container rotates manually. Then check each gear. If it is damaged, replace the toner container. Detaching and reattaching the toner container 2 Checking the toner container drive components The toner container drive parts does not properly operate, or have excessive load. Pull out the toner container and execute U135. Check if the drive gears can rotate smoothly and have no excessive load. If they are faulty, replace them. Executing U135 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Toner motor Y - Engine PWB Wiring diagram 4 Checking the toner motor The toner motor is faulty. Reattach the toner motor. If not repaired, replace the motor. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C7101 |
Description: | Toner sensor error |
Causes: | The sensor output value is less than 60 or 944 or more for 3s continuously. |
Remedy: | 1 Checking the toner sensor The toner sensor is faulty. Check the output value of the toner sensor at U155. Executing U155 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Front PWB - Engine PWB Wiring diagram 4 Replacing the drive gear The drive gears for the developer unit are damaged. (The spiral cannot rotate.) Replace the drive gears for the developer unit. 5 Replacing the developer unit The developer unit (Toner sensor ) is faulty. Replace the developer unit. Detaching and reattaching the developer unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7102 |
Description: | Toner sensor C error |
Causes: | The sensor output value is less than 60 or 944 or more for 3s continuously. |
Remedy: | 1 Checking the toner sensor The toner sensor is faulty. Check the output value of the toner sensor at U155. (Go to the next step.) Executing U155 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Front PWB - Engine PWB Wiring diagram 4 Replacing the drive gear The developer spiral does not rotate since the drive gear is faulty. Replace the drive gears for the developer unit. 5 Replacing the developer unit The developer unit (Toner sensor ) is faulty. Replace the developer unit. Detaching and reattaching the developer unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C7103 |
Description: | Toner sensor M error |
Causes: | The sensor output value is less than 60 or 944 or more for 3s continuously. |
Remedy: | 1 Checking the toner sensor The toner sensor is faulty. Check the output value of the toner sensor at U155. (Go to the next step.) Executing U155 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Front PWB - Engine PWB Wiring diagram 4 Replacing the drive gear The developer spiral does not rotate since the drive gear is faulty. Replace the drive gears for the developer unit. 5 Replacing the developer unit The developer unit (Toner sensor ) is faulty. Replace the developer unit. Detaching and reattaching the developer unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7104 |
Description: | Toner sensor Y error |
Causes: | The sensor output value is less than 60 or 944 or more for 3s continuously. |
Remedy: | 1 Checking the toner sensor The toner sensor is faulty. Check the output value of the toner sensor at U155. (Go to the next step.) Executing U155 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Front PWB - Engine PWB Wiring diagram 4 Replacing the drive gear The developer spiral does not rotate since the drive gear is faulty. Replace the drive gears for the developer unit. 5 Replacing the developer unit The developer unit (Toner sensor ) is faulty. Replace the developer unit. Detaching and reattaching the developer unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7200 |
Description: | Internal thermistor broken (For the internal count) |
Causes: | The output sampling value from the belt skew detection sensor (in-machine thermistor) exceeds the reference value. (After the abnormal value is detected, the detected temperature is regarded as 20°C / 68°F.) |
Remedy: | 1 Executing U139 The belt skew detection sensor is faulty. Execute U139 [Ext/Int] to check the external temperature and humidity display. (Go to the next step.) Executing U139 2 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed. Reinstall the primary transfer belt unit so that the connector is firmly connected. Detaching and reattaching the primary transfer belt unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 4 Primary transfer belt unit replacement The belt skew detection sensor is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7210 |
Description: | Internal thermistor short-circuited (For the internal count) |
Causes: | The output sampling value from the belt skew detection sensor (in-machine thermistor) is less than the reference value. (After the abnormal value is detected, the detected temperature is regarded as 20°C / 68°F.) |
Remedy: | 1 Executing U139 The belt skew detection sensor is faulty. Execute U139 [Ext/Int] to check the external temperature and humidity display. (Go to the next step.) Executing U139 2 Reinstalling the primary transfer belt unit The primary transfer belt unit is not properly installed. Reinstall the primary transfer belt unit so that the connector is firmly connected. Detaching and reattaching the primary transfer belt unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Primary transfer belt unit - Engine PWB Wiring diagram 4 Primary transfer belt unit replacement The belt skew detection sensor is faulty. Replace the primary transfer belt unit. Detaching and reattaching the primary transfer belt unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7221 |
Description: | LSU thermistor broken |
Causes: | The input sampling value of the PD PWB (LSU thermistor) exceeds the reference value. (After the error is detected, the detected temperature is regarded as 23°C / 73°F.) |
Remedy: | 1 Executing U139 The PD PWB is faulty. Execute U139 [LSU] to check the in-machine temperature around the LSU. (Go to the next step.) Executing U139 2 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • PD PWB (Connects to the APC PWB in the LSU) - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 3 Replacing the LSU The LSU (LSU thermistor) is faulty. Replace the LSU. Detaching and reattaching the LSU 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. Detaching and reattaching the engine PWB |
Error code: | C7231 |
Description: | LSU thermistor short-circuited |
Causes: | The input sampling value of the PD PWB (LSU thermistor) is lower than the reference value. (After the error is detected, the detected temperature is regarded as 23 degrees.) |
Remedy: | 1 Executing U139 The PD PWB is faulty. Execute U139 [LSU] to check the in-machine temperature around the LSU. (Go to the next step.) Executing U139 2 Checking the connection The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • PD PWB (Connects to the APC PWB in the LSU) - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 3 Replacing the LSU The LSU (LSU thermistor) is faulty. Replace the LSU. Detaching and reattaching the LSU 4 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7241 |
Description: | Developer thermistor broken |
Causes: | The input sampling value of the toner sensor (developer thermistor) exceeds the reference value. (After the abnormal state is detected, the detection temperature is regarded as 23°C / 73°F.) |
Remedy: | 1 Executing U139 The toner sensor is faulty. Execute U139 [Developing] to check the in-machine temperature around the developer unit. (Go to the next step.) 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Front PWB - Engine PWB Wiring diagram 4 Replacing the developer unit The developer unit (Toner sensor ) is faulty. Replace the developer unit. Detaching and reattaching the developer unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7251 |
Description: | Developer thermistor short-circuited |
Causes: | The input sampling value of the toner sensor (developer thermistor) is less than the reference value. (After the abnormal state is detected, the detection temperature is regarded as 23°C / 73°F.) |
Remedy: | 1 Executing U139 The toner sensor is faulty. Execute U139 [Developing] to check the in-machine temperature around the developer unit. (Go to the next step.) 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Front PWB - Engine PWB Wiring diagram 4 Replacing the developer unit The developer unit (Toner sensor ) is faulty. Replace the developer unit. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7301 |
Description: | Toner hopper motor error |
Causes: | It occurs 15 times continuously that the screw sensor does not detect the pulse for 200ms when driving the toner hopper motor. |
Remedy: | 1 Checking the toner hopper motor The toner hopper motor is faulty. Execute U135 [Hopper] and check the toner hopper motor operation. (Go to the next step.) Executing U135 2 Checking the toner hopper drive section The toner hopper screw does not properly rotate due to excessive load. (The pulse plate does not rotate.) Rotate the toner hopper screw manually. Then, check if toner is not clogged in the toner hopper, and clean inside the toner hopper if necessary. Detaching and reattaching the inner unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Toner hopper motor - Front PWB• Screw sensor - Front PWB?• Front PWB - Engine PWB 4 Checking the screw sensor The screw sensor is faulty. Reattach the screw sensor. If not repaired, replace the sensor. 5 Replacing the drive parts The drive transmission from the toner hopper motor is faulty. Reattach the drive gears or the toner hopper motor. If not repaired, replace the parts faulty in operation. Or, replace the inner unit. Detaching and reattaching the inner unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7302 |
Description: | Toner hopper motor C error |
Causes: | Screw sensor C can not detect the pulse for 200ms 15 times continuously when the toner hopper motor C drives. |
Remedy: | 1 Checking the toner hopper motor The toner hopper motor is faulty. Execute U135 [Hopper] and check the toner hopper motor operation. (Go to the next step.) Executing U135 2 Checking the toner hopper drive section The toner hopper screw does not properly rotate due to excessive load. (The pulse plate does not rotate.) Rotate the toner hopper screw manually. Then, check if toner is not clogged in the toner hopper, and clean inside the toner hopper if necessary. Detaching and reattaching the inner unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Toner hopper motor C - Retainer PWB • Retainer PWB - Front PWB?• Screw sensor C - Front PWB?• Front PWB - Engine PWB Wiring diagram 4 Checking the screw sensor The screw sensor is faulty. Reattach screw sensor C. If not repaired, replace the sensor. 5 Replacing the drive parts The drive transmission from the toner hopper motor is faulty. Reattach the drive gears or toner hopper motor C. If not repaired, replace the parts faulty in operation. Or, replace the inner unit. Detaching and reattaching the inner unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7303 |
Description: | Toner hopper motor M error |
Causes: | Screw sensor M can not detect the pulse for 200ms 15 times continuously when the toner hopper motor C drives. |
Remedy: | 1 Checking the toner hopper motor The toner hopper motor is faulty. Execute U135 [Hopper] and check the toner hopper motor operation. (Go to the next step.) Executing U135 2 Checking the toner hopper drive section The toner hopper screw does not properly rotate due to excessive load. (The pulse plate does not rotate.) Rotate the toner hopper screw manually. Then, check if toner is not clogged in the toner hopper, and clean inside the toner hopper if necessary. Detaching and reattaching the inner unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Toner hopper motor M - Retainer PWB • Retainer PWB - Front PWB?• Screw sensor M - Front PWB?• Front PWB - Engine PWB Wiring diagram 4 Checking the screw sensor The screw sensor is faulty. Reattach screw sensor M. If not repaired, replace the sensor. 5 Replacing the drive parts The drive transmission from the toner hopper motor is faulty. Reattach the drive gears or toner hopper motor M. If not repaired, replace the parts faulty in operation. Or, replace the inner unit. Detaching and reattaching the inner unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7304 |
Description: | Toner hopper motor Y error |
Causes: | Screw sensor Y can not detect the pulse for 200ms 15 times continuously when the toner hopper motor C drives. |
Remedy: | 1 Checking the toner hopper motor The toner hopper motor is faulty. Execute U135 [Hopper] and check the toner hopper motor operation. (Go to the next step.) Executing U135 2 Checking the toner hopper drive section The toner hopper screw does not properly rotate due to excessive load. (The pulse plate does not rotate.) Rotate the toner hopper screw manually. Then, check if toner is not clogged in the toner hopper, and clean inside the toner hopper if necessary. Detaching and reattaching the inner unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • insert the connectors. Replace the wire when it has no continuity.• Toner hopper motor Y - Retainer PWB • Retainer PWB - Front PWB?• Screw sensor Y - Front PWB?• Front PWB - Engine PWB 4 Checking the screw sensor The screw sensor is faulty. Reattach screw sensor Y. If not repaired, replace the sensor. 5 Replacing the drive parts The drive transmission from the toner hopper motor is faulty. Reattach the drive gears or toner hopper motor Y. If not repaired, replace the parts faulty in operation. Or, replace the inner unit. Detaching and reattaching the inner unit 6 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 7 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 8 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7401 |
Description: | Developer unit type mismatch error |
Causes: | "Unit Identification" of the EEPROM in the developer unit does not match the main unit. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Developer unit - Front PWB• Front PWB - Engine PWB Wiring diagram 2 Replacing the developer unit The developer unit (EEPROM) is faulty. Replace the developer unit. Detaching and reattaching the developer unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7402 |
Description: | Developer unit C type mismatch error |
Causes: | "Unit Identification" of the EEPROM in the developer unit C does not match the main unit. |
Remedy: | 1 Checking the developer unit The developer unit of the different type is installed. Install the proper developer unit. Detaching and reattaching the developer unit 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Developer unit - Front PWB?• Front PWB - Engine PWB Wiring diagram 3 Replacing the developer unit The developer unit (EEPROM) is faulty. Replace the developer unit. 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7403 |
Description: | Developer unit M type mismatch error |
Causes: | "Unit Identification" of the EEPROM in the developer unit M does not match the main unit. |
Remedy: | 1 Checking the developer unit The developer unit of the different type is installed. Install the proper developer unit. Detaching and reattaching the developer unit 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Developer unit - Front PWB • Front PWB - Engine PWB Wiring diagram 3 Replacing the developer unit The developer unit (EEPROM) is faulty. Replace the developer unit. Detaching and reattaching the developer unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7404 |
Description: | Developer unit Y type mismatch error |
Causes: | "Unit Identification" of the EEPROM in the developer unit Y does not match the main unit. |
Remedy: | 1 Checking the developer unit The developer unit of the different type is installed. Install the proper developer unit. Detaching and reattaching the developer unit 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Developer unit - Front PWB• Front PWB - Engine PWB 3 Replacing the developer unit The developer unit (EEPROM) is faulty. Replace the developer unit. Detaching and reattaching the developer unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7411 |
Description: | Drum unit type mismatch error |
Causes: | "Unit Identification" of the EEPROM in drum unit does not match the main unit. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum unit - Front PWB• Front PWB - Engine PWB Wiring diagram 2 Replacing the dum unit The drum unit (EEPROM) is faulty. Replace the drum unit. Detaching and reattaching the drum unit 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7412 |
Description: | Drum unit C type mismatch error |
Causes: | "Unit Identification" of the EEPROM in drum unit C does not match the main unit. |
Remedy: | 1 Checking the drum unit and the developer unit The drum unit of the different type is installed. Install the proper drum unit. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum unit - Front PWB?• Front PWB - Engine PWB Wiring diagram 3 Replacing the dum unit The drum unit (EEPROM) is faulty. Replace the drum unit. Detaching and reattaching the drum unit 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. Detaching and reattaching the front PWB 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7413 |
Description: | Drum unit M type mismatch error |
Causes: | "Unit Identification" of the EEPROM in drum unit M does not match the main unit. |
Remedy: | 1 Checking the drum unit and the developer unit The drum unit of the different type is installed. Install the proper drum unit. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum unit - Front PWB• Front PWB - Engine PWB Wiring diagram 3 Replacing the dum unit The drum unit (EEPROM) is faulty. Replace the drum unit. 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. Detaching and reattaching the front PWB 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7414 |
Description: | Drum unit Y type mismatch error |
Causes: | "Unit Identification" of the EEPROM in drum unit Y does not match the main unit. |
Remedy: | 1 Checking the drum unit and the developer unit The drum unit of the different type is installed. Install the proper drum unit. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum unit - Front PWB• Front PWB - Engine PWB Wiring diagram 3 Replacing the dum unit The drum unit (EEPROM) is faulty. Replace the drum unit. 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. Detaching and reattaching the front PWB 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7460 |
Description: | Developer shutter error |
Causes: | The power is turned on when the developer shutter is locked. |
Remedy: | 1 Checking the developer shutter The developer shutter is locked. Unlock the developer shutter. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer shutter sensor - Front PWB • Front PWB - Engine PWB Wiring diagram 3 Checking the developer shutter sensor The developer shutter sensor is not properly attached or faulty. Reattach the developer shutter sensor. If not repaired, replace the sensor. 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7470 |
Description: | Toner collection fan motor 1 error |
Causes: | The lock-up is detected for 5s continuously while the toner collection fan motor 1 is driving. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Toner collection fan motor 1 - Engine PWB Wiring diagram 2 Replacing the toner collection box The toner collection fan motor is faulty. Execute U037 [Toner]. If the operation is faulty, replace the toner collection box. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7480 |
Description: | Toner collection fan motor 2 error |
Causes: | The lock-up is detected for 5s continuously while the toner collection fan motor 2 is driving. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Toner collection fan motor 2 - Engine PWB Wiring diagram 2 Replacing the toner collection box The toner collection fan motor is faulty. Execute U037 [Toner]. If the operation is faulty, replace the toner collection box. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7601 |
Description: | Front ID sensor error (For the internal count) |
Causes: | • Dark potential error: The sensor output value (FrontDarkP and FrontDardS) is less than 0.15V, or more than 0.80V. • Light potential error: FrontBrightS is less than FrontDarkS, or FrontBrightP is less than Front- DarkP+0.5V. |
Remedy: | 1 Cleaning the front ID sensor The front ID sensor is dirty. Clean the front ID sensor surface. 2 Checking the ID sensor shutter The ID sensor shutter does not operate properly. Execute U033 [ID Sensor]. If the ID sensor shutter does not properly operate, reattach the cleaning solenoid. Executing U033 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Cleaning solenoid - Relay PWB • Relay PWB - Feed PWB • Feed PWB - Engine PWB Wiring diagram 4 Replacing the cleaning solenoid The cleaning solenoid is faulty. Replace the cleaning solenoid. 5 Checking the front ID sensor The front ID sensor is not properly attached. Reattach the front ID sensor. 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Front ID sensor - Feed PWB • Feed PWB - Engine PWB Wiring diagram 7 Replacing the front D sensor The front ID sensor is faulty. Check if the value of U465 [T7 CTD] is fluctuated before and after Calibration, and replace the front ID sensor if it was not fluctuated (uncalibrated) . Executing U465 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7602 |
Description: | ID sensor error |
Causes: | • Dark potential error: The sensor output value (FrontDarkP and FrontDardS) is less than 0.15V, or more than 0.80V. • Light potential error: FrontBrightS is less than FrontDarkS, or FrontBrightP is less than Front- DarkP+0.5V. |
Remedy: | 1 Cleaning the ID sensor The ID sensor is dirty. Clean the ID sensor surface. 2 Checking the ID sensor shutter The ID sensor shutter does not operate properly. If the ID sensor shutter does not operate properly when executing U033 [ID Sensor] , reattach the cleaning solenoid. Executing U033 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Cleaning solenoid - Relay PWB • Relay PWB - Feed PWB • Feed PWB - Engine PWB Wiring diagram 4 Replacing the cleaning solenoid The cleaning solenoid is faulty. Replace the cleaning solenoid 5 Checking the ID sensor The ID sensor is not properly attached. Reattach the ID sensor. 6 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • ID sensor - Feed PWB 7 Replacing the ID sensor The ID sensor is faulty. Check if the value of "T7 CTD" at U465 fluctuates before and after executing Calibration. If not (no adjustment), replace the ID sensor. Executing U465 8 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 9 Replacing the feed PWB The feed PWB is faulty. Replace the feed PWB. 10 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7800 |
Description: | Outer thermistor broken (For the internal count) |
Causes: | The external temperature sensor (external thermistor) cannot be accessed. No response is received from the external thermistor 5 times continuously for 5ms or more when accessing the external thermistor. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Room temperature sensor - Front PWB?• Front PWB - Engine PWB Wiring diagram 2 Replacing the external temperature sensor The external temperature sensor is faulty. Replace the external temperature sensor. 3 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 4 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7850 |
Description: | Power source fan motor 1 error |
Causes: | The lock-up is detected for 5s continuously while the power source fan motor 1 is driving. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Power source fan motor 1 - Engine PWB Wiring diagram 2 Checking the power source fan motor The power source fan motor does not properly rotate due to dirt. Clean power source fan motor 1 and check if the fan can rotate manually. Then, reattach it. Fan Motors Attachable Direction 3 Replacing the power source fan motor The power source fan motor is faulty. Execute U037 [Low Volt] and check the power source fan motor 1 operation. If the fan motor does not properly operate, replace it. Fan Motors Attachable Direction 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7860 |
Description: | Power source fan motor 2 error |
Causes: | The lock-up is detected for 5s continuously while the power source fan motor 2 is driving. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •Power source fan motor 2 - Engine PWB Wiring diagram 2 Checking the power source fan motor The power source fan motor does not properly rotate due to dirt. Clean power source fan motor 2 and check if the fan can rotate manually. Then, reattach it. 3 Replacing the power source fan motor The power source fan motor is faulty. Execute U037 [Low Volt] and check the power source fan motor 2 operation. If the fan motor does not properly operate, replace it. Fan Motors Attachable Direction 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7901 |
Description: | Drum unit EEPROM error |
Causes: | The EEPROM in the drum unit cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing the data. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data does not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data stored in the EEPROM in the drum unit is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Reinstalling the drum unit The drum unit is not properly installed. Reinstall drum unit BK so that the connector firmly connects. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum unit - Front PWB • Front PWB - Engine PWB 4 Replacing the dum unit The EEPROM in the drum unit is faulty. Replace the drum unit. Detaching and reattaching the drum unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7902 |
Description: | Drum unit C EEPROM error |
Causes: | The EEPROM in the drum unit cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing the data. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data does not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data stored in the EEPROM in the drum unit is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Reinstalling the drum unit The drum unit is not properly installed. Reinstall drum unit BK so that the connector firmly connects. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum unit - Front PWB • Front PWB - Engine PWB 4 Replacing the dum unit The EEPROM in the drum unit is faulty. Replace the drum unit. Detaching and reattaching the drum unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7903 |
Description: | Drum unit M EEPROM error |
Causes: | The EEPROM in the drum unit cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing the data. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data does not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data stored in the EEPROM in the drum unit is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Reinstalling the drum unit The drum unit is not properly installed. Reinstall drum unit BK so that the connector firmly connects. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum unit - Front PWB?• Front PWB - Engine PWB 4 Replacing the dum unit The EEPROM in the drum unit is faulty. Replace the drum unit. Detaching and reattaching the drum unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7904 |
Description: | Drum unit Y EEPROM error |
Causes: | The EEPROM in the drum unit cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously when reading / writing the data. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data does not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data stored in the EEPROM in the drum unit is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Reinstalling the drum unit The drum unit is not properly installed. Reinstall drum unit BK so that the connector firmly connects. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Drum unit - Front PWB?• Front PWB - Engine PWB 4 Replacing the dum unit The EEPROM in the drum unit is faulty. Replace the drum unit. Detaching and reattaching the drum unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7911 |
Description: | Developer unit EEPROM error |
Causes: | The toner sensor (EEPROM) in the developing unit cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously at read/write. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data does not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data in the toner sensor (EEPROM) of the developer unit is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the drum unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer unit - Front PWB • Front PWB - Engine PWB Wiring diagram 4 Replacing the developer unit The toner sensor (EEPROM) of the developer unit is faulty. Replace the developer unit. Detaching and reattaching the developer unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7912 |
Description: | Developer unit C EEPROM error |
Causes: | The toner sensor (EEPROM) in the developing unit C cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously at read/write. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data does not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data in the toner sensor (EEPROM) of the developer unit is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer unit C - Front PWB • Front PWB - Engine PWB 4 Replacing the developer unit The toner sensor (EEPROM) of the developer unit is faulty. Replace the developer unit. Detaching and reattaching the developer unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7913 |
Description: | Developer unit M EEPROM error |
Causes: | The toner sensor (EEPROM) in the developing unit M cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously at read/write. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data does not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data in the toner sensor (EEPROM) of the developer unit is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer unit M - Front PWB • Front PWB - Engine PWB 4 Replacing the developer unit The toner sensor (EEPROM) of the developer unit is faulty. Replace the developer unit. Detaching and reattaching the developer unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7914 |
Description: | Developer unit Y EEPROM error |
Causes: | The toner sensor (EEPROM) in the developing unit Y cannot be accessed. 1. No response from the device is detected for 5s or more 5 times continuously at read/write. 2. Data written in 2 points do not match 8 times continuously. 3. Write data and read data does not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data in the toner sensor (EEPROM) of the developer unit is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Reinstalling the developer unit The developer unit is not properly installed. Reinstall the developer unit so that the connector is firmly connected. Detaching and reattaching the developer unit 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Developer unit M - Front PWB • Front PWB - Engine PWB 4 Replacing the developer unit The toner sensor (EEPROM) of the developer unit is faulty. Replace the developer unit. Detaching and reattaching the developer unit 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the front PWB The front PWB is faulty. Replace the front PWB. 7 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7941 |
Description: | LSU EEPROM error |
Causes: | The APC PWB (EEPROM) in the LSU cannot be accessed. 1. Data written at 2 points do not match 8 times continuously. 2. Write data and read data do not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data of the APC PWB (EEPROM) in the LSU is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB (LSU) - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 3 Replacing the LSU The APC PWB (EEPROM) in the LSU is faulty. Replace the LSU. 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7942 |
Description: | LSU C EEPROM error |
Causes: | APC PWB C (EEPROM) in the LSU cannot be accessed. 1. Data written at 2 points do not match 8 times continuously. 2. Write data and read data do not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data of the APC PWB (EEPROM) in the LSU is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB (LSU) - LSU relay PWB • LSU relay PWB - Engine PWB 3 Replacing the LSU The APC PWB (EEPROM) in the LSU is faulty. Replace the LSU. Detaching and reattaching the LSU 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7943 |
Description: | LSU M EEPROM error |
Causes: | APC PWB M (EEPROM) in the LSU cannot be accessed. 1. Data written at 2 points do not match 8 times continuously. 2. Write data and read data do not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data of the APC PWB (EEPROM) in the LSU is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB (LSU) - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 3 Replacing the LSU The APC PWB (EEPROM) in the LSU is faulty. Replace the LSU. 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C7944 |
Description: | LSU Y EEPROM error |
Causes: | APC PWB Y (EEPROM) in the LSU cannot be accessed. 1. Data written at 2 points do not match 8 times continuously. 2. Write data and read data do not match 8 times continuously. |
Remedy: | 1 Resetting the main power The data of the APC PWB (EEPROM) in the LSU is faulty. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • APC PWB (LSU) - LSU relay PWB • LSU relay PWB - Engine PWB Wiring diagram 3 Replacing the LSU The APC PWB (EEPROM) in the LSU is faulty. Replace the LSU. 4 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 5 Replacing the LSU relay PWB The LSU relay PWB is faulty. Replace the LSU relay PWB. 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C8010 |
Description: | Punch motor error 1 Object: 4000-sheet finisher + Punch unit |
Causes: | 1. The punch home position sensor does not turn on when passing 200ms after driving the punch motor. 2. The pulse plate does not count the specified pulse when passing 300ms after the punch operation starts. |
Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • Punch home position sensor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. 5 Checking the punch home position sensor The punch home position sensor is not properly attached or faulty. Execute U241 [Punch] > [Punch HP]. If the PH home position sensor does not properly operate, reattach it. If not repaired, replace the sensor. Executing U241 6 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 7 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8020 |
Description: | Punch motor error 2 Object: 4000-sheet finisher + Punch unit |
Causes: | The home position is not aligned within 3s when initializing the home position or standby. |
Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. Executing U240 5 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 6 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8030 |
Description: | Punch motor error 3 Object: 4000-sheet finisher + Punch unit |
Causes: | The home position detection does not turn off within 50ms when initializing the home position. |
Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch unit is not shifted manually, repair the part that restricts the operation. 2 Checking the punch cam drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch cam drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch motor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the punch motor The punch motor is faulty. Execute U240 [Motor] > [Punch]. If the punch motor does not properly operate, replace it. Executing U240 5 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware to the latest version. Firmware Update 6 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8090 |
Description: | DF paddle motor error Object: 4000-sheet finisher |
Causes: | 1. The DF paddle sensor does not turn on when passing 1s during the DF paddle motor drive. 2. The DF paddle sensor does not turn off after driving for 1s while the sensor is on. |
Remedy: | 1 Checking the DF paddle drive components The DF paddle drive parts are not properly attached or faulty. Reattach the DF paddle drive parts. If not repaired, replace them. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •DF paddle motor - DF main PWB • DF paddle sensor - DF main PWB Wiring diagram 3 Replacing the DF paddle motor The DF paddle motor is faulty. Execute U240 [Motor] > [Beat]. If the DF paddle motor does not properly operate, replace it. Executing U240 4 Replacing the DF paddle sensor The DF paddle sensor is faulty. Execute U241 [Finisher] > [Lead Paddle]. If the DF paddle sensor does not properly operate, replace it. Executing U241 5 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8100 |
Description: | DF eject release motor error Object: 4000-sheet finisher |
Causes: | 1. The DF paper bundle ejection switch does not turn on when passing 1s while driving the DF ejection release motor. 2. The DF paper bundle ejection switch does not turn off when driving it for 1s after it turns on. |
Remedy: | 1 Checking the DF paper stack eject unit The eject guide in the DF paper stack eject unit is deformed. Correct the DF paper stack eject unit. 2 Checking the DF paper stack eject unit drive components The DF paper bundle ejection unit drive parts are not properly attached or faulty. Reattach the DF paper bundle eject unit drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF ejection release motor - DF main PWB • DF paper bundle ejection switch - DF main PWB Wiring diagram 4 Replacing the DF eject release motor The DF eject release motor is faulty. Execute U240 [Motor] > [Eject Unlock (HP) ]. If the DF exit release motor does not properly operate, replace it. Executing U240 5 Checking the DF paper stack eject switch The DF paper bundle ejection switch is not properly attached or faulty. Reattach the DF paper bundle ejection switch. If not repaired, replace the switch. 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8110 |
Description: | DF shift motor 1 error Object: 4000-sheet finisher |
Causes: | The DF shift sensor 1 does not turn ON or OFF when driving DF shift motor 1 for 3s. |
Remedy: | 1 Checking the front shift guide The front shift guide is not assembled properly. If the front shift guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front shift guide drive components The front shift guide drive parts are not properly attached or faulty. Reattach the front shift guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •DF shift motor 1 - DF main PWB • DF shift sensor 1 - DF main PWB 4 Replacing DF shift motor 1 DF shift motor 1 is faulty. Replace DF shift motor 1. 5 Checking DF shift sensor 1 DF shift sensor 1 is not properly attached or faulty. Reattach DF shift sensor 1 and execute U241 [Finisher] > [Shift Front HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8120 |
Description: | DF shift motor 2 error Object: 4000-sheet finisher |
Causes: | The DF shift sensor 2 does not turn ON or OFF when driving DF shift motor 2 for 3s. |
Remedy: | 1 Checking the rear shift guide The rear shift guide is not assembled properly. If the rear shift guide is not shifted manually, repair the part that restricts the operation. 2 Checking the rear shift guide drive components The rear shift guide drive parts are not properly attached or faulty. Reattach the rear shift guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF shift motor 2 - DF main PWB • DF shift sensor 2 - DF main PWB 4 Checking DF shift motor 2 DF shift motor 2 is faulty. Replace DF shift motor 2. 5 Checking DF shift sensor 2 DF shift sensor 2 is not properly attached or faulty. Reattach DF shift sensor 2 and execute U241 [Finisher] > [Shift Tail HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8130 |
Description: | DF shift release motor error Object: 4000-sheet finisher |
Causes: | 1. The DF shift release sensor does not turn on when driving the DF shift release motor in the direction of the home position detection for 3s. 2. The DF shift release sensor does not turn off when the DF shift release motor in the direction of the home position detection off for 3s. |
Remedy: | 1 Checking the rear shift guide The rear shift guide is not assembled properly. If the rear shift guide is not shifted manually, repair the part that restricts the operation. 2 Checking the rear shift guide drive components The rear shift guide drive parts are not properly attached or faulty. Reattach the rear shift guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF shift release motor - DF main PWB • DF shift release sensor - DF main PWB 4 Checking the DF shift release motor The DF shift release motor is faulty. Replace the DF shift release motor. 5 Checking the DF shift release sensor The DF shift release sensor is not properly attached or faulty. Reattach the DF shift release sensor and execute U241 [Finisher] > [Shift Unlock HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8140 |
Description: | Main tray error 1 Object: 4000-sheet finisher |
Causes: | DF tray sensor 1 or 2, or , DF tray upper surface sensor 1 or 2 does not turn on when passing 30s while lifting up the main tray. |
Remedy: | 1 Checking the main tray The main tray is not properly assembled. If the main tray does not move up and down manually, repair the part that restricts the operation. 2 Checking the drive parts The main tray drive parts are not properly attached or faulty. Reattach the main tray drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray motor - DF main PWB Wiring diagram 4 Replacing the DF tray motor The DF tray motor is faulty. Execute U240 [Motor] > [Tray]. If the DF tray motor does not properly operate, replace it. Executing U240 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray sensor 1 - DF main PWB • DF tray sensor 2 - DF main PWB • DF tray upper surface sensor 1 - DF main PWB • DF tray upper surface sensor 2 - DF main PWB Wiring diagram 6 Checking DF tray sensor 1, 2 DF tray sensor 1 or 2 is not properly attached or faulty. Reattach DF tray sensor 1 or 2 and execute U241 [Finisher] > [Tray U-Limit] or [Tray HP2]. If the sensor does not properly operate, replace it. Executing U241 7 Checking DF tray upper side sensor 1, 2 DF tray upper surface sensor 1 or 2 is not properly attached or faulty. Reattach DF tray upper surface sensor 1 or 2 and execute U241 [Finisher] > [Tray Top]. If the sensor does not properly operate, replace it. Executing U241 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8150 |
Description: | Main tray error 2 Object: 4000-sheet finisher |
Causes: | DF tray sensor 1 or 2, or , DF tray upper surface sensor 1 or 2 do not turn on and off when passing 5s when the main tray descends. |
Remedy: | 1 Checking the main tray The main tray is not properly assembled. If the main tray does not move up and down manually, repair the part that restricts the operation. 2 Checking the drive parts The main tray drive parts are not properly attached or faulty. Reattach the main tray drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray motor - DF main PWB Wiring diagram 4 Replacing the DF tray motor The DF tray motor is faulty. Execute U240 [Motor] > [Tray]. If the DF tray motor does not properly operate, replace it. 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray sensor 1 - DF main PWB • DF tray sensor 2 - DF main PWB • DF tray upper surface sensor 1 - DF main PWB • DF tray upper surface sensor 2 - DF main PWB Wiring diagram 6 Checking DF tray sensor 1, 2 DF tray sensor 1 or 2 is not properly attached or faulty. Reattach DF tray sensor 1 or 2 and execute U241 [Finisher] > [Tray U-Limit] or [Tray HP2]. If the sensor does not properly operate, replace it. Executing U241 7 Checking DF tray upper side sensor 1, 2 DF tray upper surface sensor 1 or 2 is not properly attached or faulty. Reattach DF tray upper surface sensor 1 or 2 and execute U241 [Finisher] > [Tray Top]. If the sensor does not properly operate, replace it. Executing U241 8 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8160 |
Description: | DF tray motor error 3 Object: 4000-sheet finisher |
Causes: | DF tray sensor 4 or 5 does not turn on when passing 60s while descending the main tray. |
Remedy: | 1 Checking the main tray The main tray is not properly assembled. If the main tray does not move up and down manually, repair the part that restricts the operation. 2 Checking the drive parts The main tray drive parts are not properly attached or faulty. Reattach the main tray drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray motor - DF main PWB Wiring diagram 4 Replacing the DF tray motor The DF tray motor is faulty. Execute U240 [Motor] > [Tray]. If the DF tray motor does not properly operate, replace it. Executing U240 5 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF tray sensor 4 - DF main PWB • DF tray sensor 5 (When installing the Folding Unit) - DF main PWB 6 Checking DF tray sensor 4, 5 DF tray sensor 4 or 5 is not properly attached or faulty. Reattach DF tray sensor 4 or 5 and execute U241 [Finisher] > [Tray L-Limit] or [Tray L-Limit (BL) ]. If the sensor does not properly operate, replace it. Executing U241 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8170 |
Description: | DF side registration motor 1 error 1 Object: 4000-sheet finisher |
Causes: | The home position cannot be detected after passing 3s when relocating to the home position. |
Remedy: | 1 Checking the front DF side registration guide The front DF side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB Wiring diagram 4 Replacing DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. 5 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8180 |
Description: | DF side registration motor 1 error 2 Object: 4000-sheet finisher |
Causes: | J6810/J6811/J6812 (Front DF side registration jam) was detected 2 times continuously. |
Remedy: | 1 Checking the front DF side registration guide The front side registration guide is not assembled properly. If the front DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the front DF side registration guide drive components The front DF side registration guide drive parts are not properly attached or faulty. Reattach the front DF side registration guide drive components. 3 Replacing the front DF side registration guide drive components The front DF side registration guide drive components are faulty. Replace the front DF side registration guide drive components. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 1 - DF main PWB • DF side registration sensor 1 - DF main PWB 5 Checking DF side registration motor 1 DF side registration motor 1 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 1 does not properly operate, replace it. Executing U240 6 Checking DF side registration sensor 1 DF side registration sensor 1 is not properly attached or faulty. Reattach DF side registration sensor 1 and execute U241 [Finisher] > [Width Front HP]. If the sensor does not properly operate, replace it. Executing U241 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8190 |
Description: | DF side registration motor 2 error 1 Object: 4000-sheet finisher |
Causes: | The home position is not detected when passing 3s while executing the operation of returning to the home position. |
Remedy: | 1 Checking the rear DF side registration guide The rear DF side registration guide is not assembled properly. If the rear DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the rear DF side registration guide drive components The rear DF side registration guide drive parts are not properly attached or faulty. Reattach the rear DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 2 - DF main PWB • DF side registration sensor 2 - DF main PWB 4 Replacing DF side registration motor 2 DF side registration motor 2 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 2 does not properly operate, replace it. Executing U240 5 Checking DF side registration sensor 2 DF side registration sensor 2 is not properly attached or faulty. Reattach DF side registration sensor 2 and execute U241 [Finisher] > [Width Tail HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8200 |
Description: | DF side registration motor 2 error 2 Object: 4000-sheet finisher |
Causes: | J6910 (Rear DF side registration jam) is detected twice continuously. |
Remedy: | 1 Checking the rear DF side registration guide The rear DF side registration guide is not assembled properly. If the rear DF side registration guide is not shifted manually, repair the part that restricts the operation. 2 Checking the rear DF side registration guide drive components The rear side registration guide drive parts are not properly attached or faulty. Reattach the rear DF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF side registration motor 2 - DF main PWB • DF side registration sensor 2 - DF main PWB Wiring diagram 4 Replacing DF side registration motor 2 DF side registration motor 2 is faulty. Execute U240 [Motor] > [Width Test (A3) ] or [Width Test (LD) ]. If DF side registration motor 2 does not properly operate, replace it. 5 Checking DF side registration sensor 2 DF side registration sensor 2 is not properly attached or faulty. Reattach DF side registration sensor 2 and execute U241 [Finisher] > [Width Tail HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8210 |
Description: | DF staple motor front/rear error Object: 4000-sheet finisher |
Causes: | The home position is not detected when passing 3s while returning to the home position at the initial operation. |
Remedy: | 1 Checking the DF staple unit The DF staple unit is not assembled properly. If the DF staple unit is not shifted manually back and forth, repair the part that restricts the operation. 2 Checking the DF staple unit drive components The DF staple unit drive parts are not properly attached or faulty. Reattach the DF staple unit drive parts. If not repaired, replace the parts. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF staple motor - DF main PWB • DF staple sensor - DF main PWB Wiring diagram 4 Replacing the DF staple motor The DF staple motor is faulty. Execute U240 [Motor] > [Staple]. If the DF staple motor does not properly operate, replace the DF staple unit. 5 Checking the DF staple sensor The DF staple sensor is not properly attached or faulty. Reattach the DF staple sensor. Then, replace the DF staple unit if the sensor is not fixed. Detaching and reattaching the DF staple unit 6 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8230 |
Description: | DF staple motor error Object: 4000-sheet finisher |
Causes: | J7000 (DF staple jam) is detected twice continuously. (Condition of detecting 2nd paper jam: The home position is not detected when passing 600ms since the motor starts up.) |
Remedy: | 1 Checking the DF staple unit The DF staple unit is not assembled properly. If the DF staple cannot operate manually without paper jam, repair the part that restricts the DF staple. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF staple unit - DF main PWB Wiring diagram 3 Replacing the DF staple unit The DF staple unit is faulty. Replace the DF staple unit. Detaching and reattaching the DF staple unit 4 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8260 |
Description: | DF middle motor HP detection error Object: 4000-sheet finisher |
Causes: | J7900 (DF paddle jam) is detected twice continuously. |
Remedy: | 1 Checking the DF paddle drive components The DF paddle drive parts are not properly attached or faulty. Reattach or replace the DF paddle drive components. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DF middle motor - DF main PWB • DF paddle sensor - DF main PWB Wiring diagram 3 Replacing the DF middle motor The DF middle motor is faulty. Execute U240 [Motor] > [Middle (H) ] or [Middle (L) ]. If the DF middle motor does not properly operate, replace it. Executing U240 4 Checking the DF paddle sensor The DF paddle sensor is not properly attached or faulty. Reattach the DF paddle sensor and execute U241 [Finisher] > [Lead Paddle]. If the sensor does not properly operate, replace it. Executing U241 5 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. Detaching and reattaching the DF main PWB |
Error code: | C8300 |
Description: | Main program error / Folding unit communication error Object: 4000-sheet finisher + Folding unit |
Causes: | The main program of the folding unit is faulty when turning the power on. The communication error appears 10 times continuously after finishing the folding unit firmware version reading. |
Remedy: | 1 Resetting the main power The operation program does not properly operate. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the BF firmware and the DF firmware to the latest version. Firmware Update 3 Checking the BF set switch The BF set switch is not properly attached. Reattach the BF set switch. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF main PWB - DF main PWB Wiring diagram 5 Replacing the BF set switch The BF set switch is faulty. Execute U241 [Booklet] > [Set]. If the BF set switch does not properly operate, replace it. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. Detaching and reattaching the DF main PWB |
Error code: | C8310 |
Description: | BF side registration motor 2 error Object: 4000-sheet finisher + Folding unit |
Causes: | BF side registration sensor 2 does not turn on after passing 1s during the initial operation. |
Remedy: | 1 Checking the upper BF side registration guide The upper BF side registration guide is not assembled properly. If the upper BF side registration guide is not shifted manually back and forth, repair the part that restricts the operation. 2 Checking the upper BF side registration guide drive components The upper BF side registration guide drive parts are not properly attached or faulty. Reattach the upper BF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF side registration motor 2 - BF main PWB • BF side registration sensor 2 - BF main PWB Wiring diagram 4 Replacing BF side registration motor 2 BF side registration motor 2 is faulty. Execute U240 [Booklet] > [Width Test(A3)] or [Width Test(LD)]. If BF side registration motor 2 does not properly operate, replace it. Executing U240 5 Checking BF side registration sensor 2 BF side registration sensor 2 is not properly attached or faulty. Reattach BF side registration sensor 2 and execute U241 [Booklet] > [Width Down HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
Error code: | C8320 |
Description: | BF adjustment motor error Object: 4000-sheet finisher + Folding unit |
Causes: | At the initialization, turning on of the BF adjustment sensor is not detected after 2.5s passes. |
Remedy: | 1 Checking the BF shift belt The BF shift belt is not assembled properly. If the BF shift belt is not operated manually, repair the part that restricts the operation. 2 Checking the BF shift belt drive components The BF shift belt drive parts are not properly attached or faulty. Reattach the BF shift belt drive parts. Reattach it if the belt comes off. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF adjustment motor 1, 2 - BF main PWB • BF adjustment sensor 1, 2 - BF main PWB Wiring diagram 4 Replacing BF adjustment motor 1, 2 BF adjustment motor 1 or 2 is faulty. Execute U240 [Booklet] > [Bundle Down] or [Bundle Up]. If BF adjustment motor 1 or 2 does not properly operate, replace them. Executing U240 5 Checking BF adjustment sensor 1, 2 BF adjustment sensor 1 or 2 is not properly attached or faulty. Reattach BF adjustment sensor 1 or 2 and execute U241 [Booklet] > [Width Down HP] or [Bundle Up HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
Error code: | C8330 |
Description: | BF blade motor error Object: 4000-sheet finisher + Folding unit |
Causes: | The BF blade sensor does not turn on after passing 3s during the initial operation. |
Remedy: | 1 Checking the BF blade The BF blade is not assembled properly. If the BF blade is not operated manually, repair the part that restricts the operation. 2 Checking the BF blade drive components The BF blade drive parts are not properly attached or faulty. Reattach the BF blade drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF blade motor - BF main PWB • BF blade sensor - BF main PWB Wiring diagram 4 Replacing the BF blade motor The BF blade motor is faulty. Execute U240 [Booklet] > [Blade]. If the BF blade motor does not properly operate, replace it. Executing U240 5 Checking the BF blade sensor The BF blade sensor is faulty. Reattach the BF blade sensor and reinsert the connector. Next, execute U241 [Booklet] > [Blade HP]. If it does not properly operate, replace the sensor. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
Error code: | C8340 |
Description: | BF staple motor error 1 Object: 4000-sheet finisher + Folding unit |
Causes: | J7600 (BF staple jam) is detected twice continuously. (Condition of detecting 2nd paper jam: The home position is not detected when passing 600ms since the motor starts up.) |
Remedy: | 1 Checking the BF staple unit The BF staple unit is not assembled properly. If the BF staple unit is not operated manually, repair the part that restricts the operation. 2 Checking the BF staple unit drive components The BF staple unit drive parts are not properly attached or faulty. Reattach the BF staple unit drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF staple unit - BF main PWB Wiring diagram 4 Replacing the BF staple motor The BF staple motor is faulty. Execute U240 [Booklet] > [Staple]. If the BF staple motor does not properly operate, replace it. Executing U240 5 Replacing the BF staple unit The BF staple unit is faulty. Replace the BF staple unit. 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
Error code: | C8350 |
Description: | BF side registration motor 1 error Object: 4000-sheet finisher + Folding unit |
Causes: | BF side registration sensor 1 does not turn on after passing 1s during the initial operation. |
Remedy: | 1 Checking the lower BF side registration guide The lower BF side registration guide is not assembled properly. If the lower BF side registration guide is not operated manually, repair the part that restricts the operation. 2 Checking the lower BF side registration guide drive components The lower BF side registration guide drive parts are not properly attached or faulty. Reattach the lower BF side registration guide drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF side registration motor 1 - BF main PWB • BF side registration sensor 1 - BF main PWB Wiring diagram 4 Replacing BF side registration motor 1 BF side registration motor 1 is faulty. Execute U240 [Booklet] > [Width Test(A3)] or [Width Test(LD)]. If BF side registration motor 1 does not properly operate, replace it. Executing U240 5 Checking BF side registration sensor 1 BF side registration sensor 1 is not properly attached or faulty. Reattach BF side registration sensor 1 and execute U241 [Booklet] > [Width Up HP]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
Error code: | C8360 |
Description: | BF main motor error Object: 4000-sheet finisher + Folding unit |
Causes: | The lock-up signal was detected for 1s continuously during the motor operation. |
Remedy: | 1 Checking the BF conveying roller The BF conveying roller is not assembled properly. If the BF conveying roller is not rotated manually, repair the part that restricts the operation. 2 Checking the BF conveying roller drive parts The BF conveying roller drive parts are not properly attached or faulty. Reattach the BF conveying roller drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF main motor - BF main PWB Wiring diagram 4 Replacing the BF main motor The BF main motor is faulty. Execute U240 [Booklet] > [Folding]. If the BF main motor does not properly operate, replace it. Executing U240 5 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
Error code: | C8370 |
Description: | BF staple motor error 2 Object: 4000-sheet finisher + Folding unit |
Causes: | J7600 (BF staple jam) is detected twice continuously. (Condition of detecting 2nd paper jam: The lock-up detection signal is outputs for 500ms continuously during the motor operation.) |
Remedy: | 1 Checking the BF staple unit The BF staple unit is not assembled properly. If the BF staple unit is not operated manually, repair the part that restricts the operation. 2 Checking the BF staple unit drive components The BF staple unit drive parts are not properly attached or faulty. Reattach the BF staple unit drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF staple unit - BF main PWB Wiring diagram 4 Replacing the BF staple motor The BF staple motor is faulty. Execute U240 [Booklet] > [Staple]. If the BF staple motor does not properly operate, replace it. Executing U240 5 Replacing the BF staple unit The BF staple unit is faulty. Replace the BF staple unit. 6 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
Error code: | C8410 |
Description: | Punch slide motor error 1 Object: 4000-sheet finisher + Punch unit |
Causes: | The punch slide sensor does not turn on after the home position shifts 30mm. |
Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch slide section is not shifted manually forwardbackward, repair the part that restricts the operation. 2 Checking the punch drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch slide motor - PH main PWB • Punch slide sensor - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the PH slide motor The punch slide motor is faulty. Execute U240 [Motor] > [Punch Move]. If the punch slide motor does not properly operate, replace it. 5 Checking the punch slide sensor The punch slide sensor is not properly attached or faulty. Reattach the punch slide sensor. If not repaired, replace it. 6 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8420 |
Description: | Punch slide motor error 2 Object: 4000-sheet finisher + Punch unit |
Causes: | The paper edge cannot be detected even if shifting 30mm when detecting the paper edge. |
Remedy: | 1 Checking the punch unit The punch unit is not assembled properly. If the punch slide section is not shifted manually forwardbackward, repair the part that restricts the operation. 2 Checking the punch drive components The punch cam drive parts are not properly attached or faulty. Reattach the punch drive parts. If not repaired, replace them. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • Punch slide motor - PH main PWB • PH paper edge sensor 1, 2 - PH main PWB • PH main PWB - DF main PWB Wiring diagram 4 Replacing the PH slide motor The punch slide motor is faulty. Execute U240 [Motor] > [Punch Move]. If the punch slide motor does not properly operate, replace it. 5 Checking the PH paper edge sensor 1, 2 PH paper edge sensor 1 or 2 is not properly attached or faulty. Reattach PH paper edge sensor 1 or 2 and execute U241 [Punch] > [Edge Face1] or [Edge Face2]. If the sensor does not properly operate, replace it. Executing U241 6 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 7 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8430 |
Description: | Main program error (Punch unit) / Punch unit communication error Object: 4000-sheet finisher + Punch unit |
Causes: | The main program of the punch unit is faulty when turning the power on. The communication error appears 10 times continuously after finishing the punch unit firmware version reading. |
Remedy: | 1 Resetting the main power The operation program does not properly operate. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the PH firmware and the DF firmware to the latest version. Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • PH main PWB - DF main PWB 4 Replacing the PH main PWB The PH main PWB is faulty. Replace the PH main PWB. 5 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8500 |
Description: | Main program error (Mail Box) / Mail Box communication error Object: 4000-sheet finisher + Mail box |
Causes: | The main program of the mail box is faulty when turning the power on. The communication error appears 10 times continuously after finishing the mail box firmware version reading. |
Remedy: | 1 Resetting the main power The operation program does not properly operate. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the MB firmware and the DF firmware to the latest version. Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • MB main PWB - DF main PWB 4 Replacing the MB main PWB The MB main PWB is faulty. Replace the MB main PWB. 5 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. |
Error code: | C8510 |
Description: | MB conveying motor error 1 Object: 4000-sheet finisher + Mail box |
Causes: | The MB home position sensor does not turn on after passing 5s during the initial operation. |
Remedy: | 1 Checking the MB conveying roller The MB conveying roller is not assembled properly. If the MB conveying roller is not rotated manually, repair the part that restricts the operation. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • MB conveying motor - MB main PWB • MB home position sensor - MB main PWBPWB Wiring diagram 3 Replacing the MB conveying motor The MB conveying motor is faulty. Execute U240 [Mail Box] > [Conv]. If the MB conveying motor does not properly operate, replace it. 4 Checking the MB home position sensor The MB home position sensor is not properly attached or faulty. Reattach the MB home position sensor and execute U241 [Mail Box] > [Motor HP]. If the sensor does not properly operate, replace it. Executing U241 5 Replacing the MB main PWB The MB main PWB is faulty. Replace the MB main PWB. |
Error code: | C8520 |
Description: | MB conveying motor error 2 Object: 4000-sheet finisher + Mail box |
Causes: | The MB home position sensor does not turn off after passing 1s during the standby operation. |
Remedy: | 1 Checking the MB conveying roller The MB conveying roller is not assembled properly. If the MB conveying roller is not rotated manually, repair the part that restricts the operation. 2 Checking the MB conveying roller drive components The MB conveying roller drive parts are not properly attached or faulty. Reattach the MB conveying roller drive components. 3 Replacing the MB conveying roller drive components The MB conveying roller drive components are faulty. Replace the MB conveying roller drive components. 4 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • MB conveying motor - MB main PWB • MB home position sensor - MB main PWBPWB 5 Replacing the MB conveying motor The MB conveying motor is faulty. Execute U240 [Mail Box] > [Conv]. If the MB conveying motor does not properly operate, replace it. Executing U240 6 Checking the MB home position sensor The MB home position sensor is not properly attached or faulty. Reattach the MB home position sensor and execute U241 [Mail Box] > [Motor HP]. If the sensor does not properly operate, replace it. Executing U241 7 Replacing the MB main PWB The MB main PWB is faulty. Replace the MB main PWB. |
Error code: | C8800 |
Description: | Main program error (DF) / Engine - DF communication error Object: 4000-sheet finisher |
Causes: | The main program is faulty when turning on the power. The Engine -DF communication error is detected 10 times continuously. |
Remedy: | 1 Resetting the main power The program does not start up properly. Turn the power switch and the main power switch off . After 5s passes, turn the main power switch and the power switch on. 2 Firmware upgrade The firmware is not the latest version. Upgrade the DP firmware to the latest version. Firmware Update 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity. • DF main PWB - Engine PWB Wiring diagram 4 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. 5 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 6 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C8900 |
Description: | DF backup error Object: 4000-sheet finisher (For the internal count) |
Causes: | The writing data and the reading data mismatch 3 times continuously. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reinsert the connectors. Replace the wire when it has no continuity. • DF main PWB - Engine PWB Wiring diagram 2 Replacing the DF main PWB The DF main PWB is faulty. Replace the DF main PWB. Detaching and reattaching the DF main PWB |
Error code: | C8930 |
Description: | BF unit backup error Object: 4000-sheet finisher + Folding unit (For the internal count) |
Causes: | The writing data and the reading data mismatch 3 times continuously. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • BF main PWB - DF main PWB Wiring diagram 2 Replacing the BF main PWB The BF main PWB is faulty. Replace the BF main PWB. |
Error code: | C9000 |
Description: | Main program error (DP) / Document Processor communication error |
Causes: | The document processor cannot be communicated. |
Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the scanner firmware and the DP firmware to the latest version. Firmware Update 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DP main PWB - Engine PWB Wiring diagram 3 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. Detaching and reattaching the DP main PWB 4 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C9040 |
Description: | DP lift motor ascend error |
Causes: | The DF lift upper limit sensor does not detect ON when passing 1500 pulses 5 times or more while the DP lift motor drives to ascend. |
Remedy: | 1 Checking the DP original feed lift plate The DP original feed lift plate is not properly attached. If the DP original feed lift plate does not move up and down manually, repair the part that restricts the operation. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DP lift motor - DP main PWB • DP lift upper limit sensor - DP main PWB Wiring diagram 3 Replacing the DP lift motor The DP lift motor is faulty. Execute U243 [Lift Motor]. If the DP lift motor does not properly operate, replace the motor. 4 Checking the DP lift upper limit sensor The DP lift upper limit sensor is not properly attached or faulty. Reattach the DP lift upper limit sensor and execute U244 [Lift U-Limit]. If the sensor does not properly operate, replace it. Executing U244 5 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
Error code: | C9050 |
Description: | DP lift motor descend error |
Causes: | The DF lift lower limit sensor does not detect ON when passing 1500 pulses while the DP lift motor drives to descend. (3 times of retries) |
Remedy: | 1 Checking the DP original feed lift plate The DP original feed lift plate is not properly attached. If the DP original feed lift plate does not move up and down manually, repair the part that restricts the operation. 2 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DP lift motor - DP main PWB • DP lift lower limit sensor - DP main PWB Wiring diagram 3 Replacing the DP lift motor The DP lift motor is faulty. Execute U243 [Lift Motor]. If the DP lift motor does not properly operate, replace the motor. 4 Checking the DP lift lower limit sensor The DP lift lower limit sensor is not properly attached or faulty. Reattach the DP lift lower limit sensor and execute U244 [Lift L-Limit]. If the sensor does not properly operate, replace it. Executing U244 5 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
Error code: | C9060 |
Description: | DP EEPROM error |
Causes: | Read data and write data to the EEPROM do not match 3 times continuously. |
Remedy: | 1 Checking the EEPROM The EEPROM is not properly installed. Reattach the EEPROM on the DP main PWB. 2 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. Detaching and reattaching the DP main PWB 3 Replacing the EEPROM The EEPROM is faulty. Replace the EEPROM on the DP main PWB and execute U411. |
Error code: | C9070 |
Description: | DP - SHD communication error |
Causes: | The communication error between the DP main PWB and the DPSHD PWB was detected during communication. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DPSHD PWB - DP main PWB Wiring diagram 2 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. 3 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
Error code: | C9080 |
Description: | LED failure detection (For the internal count) |
Causes: | After 4 blocks of the LED lamps of the DPCIS are lit when turning the power on, the acquired peak value of some blocks is at the reference value or less. (The light level detected by the CIS is not enough.) |
Remedy: | 1 Checking the LED lamp The LED lamp of the DPCIS does not light. 0 Executing U203 2 Checking the DPSHD PWB The DPSHD PWB is not properly connected. Reconnect the DPSHD PWB to the DPCIS. 3 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. • DPSHD PWB - DP main PWB Wiring diagram 4 Executing U411 DP scanning is not properly adjusted. Execute U411 [DP FD (ChartB) ] and [DP FD (ChartA)]. Executing U411 5 Replacing the DPCIS The DPCIS is faulty. Replace the DPCIS, and then execute U091 and U411. Detaching and reattaching the DPCIS 6 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. |
Error code: | C9200 |
Description: | DP multi-feeding sensor communication error (For the internal count) |
Causes: | 1. The DP multi-feeding sensor connection signal is not connected twice continuously with one retry when turning the power on. 2. The DP multi-feeding sensors receive the incorrect communication command 3 times continuously. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •DP multi-feeding sensor (emitter) - DP main PWB • DP multi-feeding sensor (receiver) - DP main PWB Wiring diagram 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the DP firmware to the latest version. Firmware Update 3 Replacing the DP multifeeding sensors The DP multi-feeding sensors are faulty. Replace the DP multi-feeding sensor (emitter) or the DP multi-feeding sensor (receiver). 4 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
Error code: | C9210 |
Description: | DP multi-feeding sensor communication error (For the internal count) |
Causes: | The DP multi-feeding sensors detect paper for 3 jobs continuously before the paper conveying starts. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •DP multi-feeding sensor (emitter) - DP main PWB • DP multi-feeding sensor (receiver) - DP main PWB Wiring diagram 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the DP firmware to the latest version. Firmware Update 3 Replacing the DP multifeeding sensors The DP multi-feeding sensors are faulty. Replace the DP multi-feeding sensor (emitter) or the DP multi-feeding sensor (receiver). 4 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
Error code: | C9220 |
Description: | DP multi-feeding sensor backup error (For the internal count) |
Causes: | 1. Write data and read data does not match 3 times continuously when writing. 2. Block erase failed 3 times continuously. 3. Writing does not complete when passing 200ms after starting writing. |
Remedy: | 1 Checking the connection The connector is not properly connected. Or, the wire is faulty. Clean the terminal of the following wire connectors and reconnect the connectors. If there is no continuity, replace the wire. •DP multi-feeding sensor (emitter) - DP main PWB • DP multi-feeding sensor (receiver) - DP main PWB Wiring diagram 2 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware and the DP firmware to the latest version. Firmware Update 3 Replacing the DP multifeeding sensors The DP multi-feeding sensors are faulty. Replace the DP multi-feeding sensor (emitter) or the DP multi-feeding sensor (receiver). 4 Replacing the DP main PWB The DP main PWB is faulty. Replace the DP main PWB. |
Error code: | C9500 |
Description: | Image processing circuit error (Scanner) |
Remedy: | 1 Checking the FFC The FFC is not properly connected, or it is faulty. Reconnect the following FFC. If the FFC terminal section is deformed or the FFC is broken, replace the FFC. • Engine PWB - Main PWB Wiring diagram 2 Replacing the main PWB The main PWB is faulty. Replace the main PWB. Detaching and reattaching the main PWB 3 Replacing the engine PWB The engine PWB is faulty. Replace the engine PWB. |
Error code: | C9510 |
Description: | Image processing circuit error (DP) |
Remedy: | 1 Checking the DP relay PWB The DP relay PWB is not properly attached. Reattach the DP relay PWB. 2 Checking the connection The connector is not properly connected. Or, the SATA cable is faulty. 0 Wiring diagram 3 Replacing the DPSHD PWB The DPSHD PWB is faulty. Replace the DPSHD PWB. 4 Replacing the DP relay PWB The DP relay PWB is faulty. Replace the DP relay PWB. 5 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
Error code: | C9540 |
Description: | Backup data error |
Causes: | When multiple parts are replaced at the same time, the internal data is changed and it interferes with the machine operation. Consequently, the main unit cannot recover. |
Remedy: | 1 Checking the PWB Multiple PWBs were replaced at the same time. Recover to the original, if 2 or more of the following related parts were replaced at the same time. • Related parts: Memory, each PWB 2 Checking the unit Multiple units were replaced at the same time. Be sure not to perform the following works at the same time when the memory or each PWB is replaced. • Replacing the drum unit or the developer unit • Relocating the drum units to other colorspositioninsideamainunit` |
Error code: | F000 |
Description: | Communication error between the main unit and CPU |
Causes: | The panel cannot be detected since the CPU communication between the main PWB and the operation panel main PWB is unavailable. |
Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 3 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 4 Replacing the main PWB The main PWB is faulty. Replace the main PWB. 5 Replacing the operation panel main PWB The operation panel main PWB is faulty. Replace the panel main PWB. |
Error code: | F010 |
Description: | Program read error (SSD) |
Causes: | The garbled 2bit data was detected during the program read from the flash memory. |
Remedy: | 1 (When the service call error appears after replacing the SSD) Replacing the SSD along the correct procedures The firmware is not stored in the SSD. Insert the USB memory device containing all released firmware into the main unit, and turn the main power on. Firmware Update 2 Checking the SSD (if lit after replacing the SSD) An SSD out of specification is installed. Install the SSD matching the memory capacity specification. 3 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 4 Checking the SSD The SSD is not properly attached. Check if the SSD terminal is not faulty and clean it. Then, reinstall the SSD. 5 Checking the connection The connector is not properly connected. The wire or the SATA cable is faulty. Clean the terminal of the following SATA cable connector and the wire connectors and reconnect the connectors. If there is no continuity, replace the SATA cable or the wire. • Main PWB - Operation panel main PWB Wiring diagram 6 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 7 Replacing the SSD The SSD is faulty. Backup the data in the SSD at U026. Then, replace the SSD and turn the main power on while installing the USB memory storing the firmware for the affected model n the main unit. 8 Replacing the main PWB The main PWB is faulty. Replace the main PWB. |
Error code: | F020 |
Description: | System memory error (RAM reading/writing error or CPU memory error) |
Causes: | The error appears during the reading/writing check of the RAM for the CPU when the main unit starts up. |
Remedy: | 1 Resetting the main power The communication between the main PWB and the operation panel main PWB is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 3 Checking the main PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the main PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the main PWB. |
Error code: | F021 |
Description: | System memory error (RAM reading/writing error or ASIC memory error) |
Causes: | The error appears during the reading/writing check of the RAM for the main PWB ASIC when the main unit starts up. |
Remedy: | 1 Resetting the main power The main PWB does not properly start up. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. Executing U021 3 Checking the main PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the main PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the main PWB. |
Error code: | F022 |
Description: | System memory error (RAM reading/writing error or ASIC memory error) |
Causes: | The error appears during the reading/writing check of the RAM for the DP relay PWB ASIC when the main unit starts up. |
Remedy: | 1 Resetting the main power The main PWB does not properly start up. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Executing U021 The backup RAM data is faulty. Execute U021 to initialize the backup RAM data. 3 Checking the DP relay PWB The DP relay PWB is not properly connected or attached. Reattach the DP relay PWB and secure it with the screws. If not repaired, replace the DP relay PWB. |
Error code: | F040 |
Description: | Option installation error |
Causes: | The size of the attached main memory is 2 GB when the DSDF is installed. |
Remedy: | Main memory Replace the main memory with a 4 GB one. DSDF • Remove the DSDF. • Replace the DSDF with an RADF. |
Error code: | F041 |
Description: | Over than available setting number tray detection error |
Causes: | Over than available setting number tray is installed. |
Remedy: | Remove the available setting number tray. |
Error code: | F050 |
Description: | Engine main program error |
Causes: | The engine program cannot start up. |
Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 2 Resetting the main power The print engine ROM checksum is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 3 Checking the EEPROM The EEPROM is not properly attached. Reattach the EEPROM. 4 Checking the engine PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the engine PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the engine PWB. |
Error code: | F051 |
Description: | Scanner engine program error |
Causes: | The scanner program cannot start up |
Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the engine firmware to the latest version Firmware Update 2 Resetting the main power The scanner engine RAM checksum is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 3 Checking the SSD The SSD is not properly attached. Reattach the SSD. 4 Checking the engine PWB The connector or the FFC is not properly connected. The wire, the FFC or the PWB is faulty. Clean the connectors on the engine PWB and the FFC terminal. Then, reconnect the wire connector and the FFC. At that time, if the wire is pinched by other parts or it is damaged, repair or replace the wire. If the FFC terminal section is deformed or FFC is broken, replace the FFC. If the issue is not resolved, replace the engine PWB. |
Error code: | F052 |
Description: | Panel engine program error |
Causes: | The panel program cannot start up. |
Remedy: | 1 Firmware upgrade The firmware is not the latest version. Upgrade the panel firmware to the latest version. Firmware Update 2 Resetting the main power The panel RAM checksum is faulty. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 3 Checking the connection The connector is not properly connected or the wire is faulty. Clean the connectors on the operation panel main PWB and reinsert the wire connectors. If there is no continuity, replace the wire. Wiring diagram 4 Replacing the operation panel main PWB The operation panel main PWB is faulty. Replace the panel main PWB. |
Error code: | F186 |
Description: | Finisher Interface Error |
Causes: | • Finisher Control Board • Finisher Interconnect Cable • Engine Control Board, PL1.1.4 |
Remedy: | 1 Check the following for evidence of fault or damage: • Finisher Interconnect Cable • Finisher connections Is there any damage? Replace any damaged parts. Go to Step 2. 2 Check all the pins of the Finisher Interconnect Cable for continuity. Is the cable conductive? Go to Step 3. Replace the cable. 3 Check all the pins of the OPTIF Harness for continuity. Is the harness conductive? Go to Step 4. Replace the OPTIF harness. 4 Replace the Finisher Control Board. Does the error persists? Replace the Engine Control Board Complete. |
Error code: | F278 |
Description: | Secondary power source error |
Causes: | The operation became unstable since the primary supply power dropped out temporarily and recovered. |
Remedy: | 1 Resetting the main power The power reset was performed immediately. Remove the original and check the sensor. Next, turn off the power switch and main switch. Then, turn on the main switch and power switch when passing 5 seconds. 2 Checking the connection The connector is not properly connected or the wire is faulty. Clean the connectors on the LVU and reinsert the wire connectors. If there is no continuity, replace the wire. 3 Replacing the LVU The LVU is faulty. Replace the LVU. |