Lexmark C950de

Рейтинг

Актуальный

Тип устройства

Принтер

Технология печати

лазерная

Макс. формат

Число страниц в месяц

225000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Технология печати	лазерная
Макс. формат	A3
Тип	лазерный/светодиодный
Телефон
Печать фотографий
Сканер
Копир
Факс
Область применения	большой офис
Число страниц в месяц	225 000
Тип устройства	Принтер
Размещение	настольный
Цветность печати	цветная
Принтер
Печать без полей
Пигментные чернила
Прямая печать
Двусторонняя печать
Количество цветов	4
Макс, разрешение для ч/б печати
По X	1 200
По Y	1 200
Скорость ч/б печати
A4	50
A4	45
Время выхода первого отпечатка
Цветн,	7,7
Ч/б	5,2
Сканер
Стандарт TWAIN
Слайд-адаптер
Отправка изображения по e-mail
Стандарт WIA
Расходные материалы
Количество картриджей	4
Ресурс цветного картриджа/тонера	22 000
Ресурс ч/б картриджа/тонера	32 000
Ресурс фотобарабана	115 000
Печать на:
Глянцевой бумаге
Пленках
Этикетках
Карточках
Конвертах
Матовой бумаге
CD/DVD
Фотобумаге
Рулоне
Плотность бумаги
Максимальная	256
Минимальная	60
Факс
Цветной
PC Fax
Телефон
Проводная трубка
Caller ID
Автоответчик
Стандарт DECT
Спикерфон
Беспроводная трубка
АОН
Шрифты и языки управления
Языки управления
PCL 6
PPDS
PDF
PostScript 3
PCL 5c
PostScript
PCL 5e
PostScript 2
Количество установленных шрифтов
PostScript	158
PCL	87
PPDS	44
Лотки
Емкость лотка ручной подачи	100
Подача бумаги
Стандартная	620
Максимальная	5 140
Вывод бумаги
Стандартный	500
Максимальный	3 750
Финишер
Сортировка со сдвигом
Сортер
Брошюровщик
Электронная сортировка
Степлер
Интерфейсы
Версия USB	2,0
Ethernet (RJ-45)
USB
Веб-интерфейс
LPT
Устройство для чтения карт памяти
RS-232
FireWire (IEEE 1394)
Wi-Fi
Bluetooth
Инфракрасный порт
Память/Процессор
Макс, объем памяти	2 048
Объем памяти	1 024
Частота процессора	1 200
Дополнительная информация
Диагональ дисплея	4,3
Работа от аккумулятора
Экран
Поддержка ОС
DOS
Windows
Linux
Mac OS
Уровень шума
В режиме ожидания	22
При работе	53
Габариты
Глубина	685
Вес	95
Ширина	640
Высота	565

Коды ошибок

111.01

111.02, 111.03, 111.04

112.01

112.02, 112.03, 112.04

113.01

113.02, 113.03, 113.04

114.01

114.02, 114.03, 114.04

115.01

115.02

115.03

115.04

115.05

115.06

115.07

115.08

115.09

115.10

115.11

115.12

115.13

115.14

115.15

120.01

120.02

121.01

121.03

121.04

121.05

121.06

121.07

121.08

121.09

121.10

121.11

121.12

121.13

126.01

126.02

126.03

126.04

126.05

126.06

126.07

126.08

126.09

126.12

132.01

132.03

132.04

137.01

140.01

141.01

141.02

151.01

151.02

154.01

155.01

156.01

1565

157.01

158.01

171.01

171.02

172.01

173.01

174.01

175.01

175.03

175.04

175.05

175.06

175.07

175.08

191.01

191.02...191.05

191.06

191.08

191.09

191.10

191.11

191.12

191.13

191.14

191.15

191.16

191.17

191.18

191.19

191.20

191.23

191.24

191.25

200.01

200.03

200.05

200.53

200.55

201.01

201.03

201, 202

203

230

231

24x

250

281

31.xx

32.xx

455

4yy.xx

80.xx

82.xx

83.xx

849.00

84.xx

88.xx

910.02...910.07

939.00

940.02

940.03

940.04

951.xx

953.xx

955.xx

956.00

956.01

956.02

956.03

957.01

957.02

980.04

980.05

995.00

996.00

997.00

999.00

Описание

Парткод

Название

LEXMARK Тонер-картридж голубой

LEXMARK Тонер-картридж черный

LEXMARK Тонер-картридж пурпурный

LEXMARK Тонер-картридж желтый

LEXMARK Картридж со скрепками 4 шт. в упаковке

LEXMARK Картриджи со скрепками (3 упаковки)

LEXMARK Блок фотобарабана, комплект из 3 шт

LEXMARK Контейнер для отработаного тонера

Error code:	111.01
Description:	Service printhead error LED printhead (K) failure Open circuit detected in the LED printhead.
Remedy:	1 Check the LED Printhead (K) for proper installation. Is the LED Printhead (K) properly installed? Go to step 2. Install the LED Printhead (K) properly. 2 Check the event log for the history of errors that occurred. 1. Enter the Diagnostics Menu. 2. Navigate to EVENT LOG. 3. Touch Display Event Log. Has any connection-related errors occurred? Go to step “111.02–111.04 LED printhead (K) signal failure”. Replace the LED Printhead (K). Go to “LED printhead removal”.

Error code:	111.02, 111.03, 111.04
Description:	111.02 Service printhead error LED printhead (K) failure 111.03 Service printhead error LED printhead (K) failure 111.04 Service printhead error LED printhead (K) failure
Remedy:	1 Check the LED printhead. Is the above component properly connected? Go to step 2. Replace the connections. Replace the printhead flat data cable. 2 Replace the LED printhead. Go to “LED printhead removal” . Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal” . Problem resolved

Error code:	112.01
Description:	Service printhead error LED printhead (C) failure Open circuit detected in the LED printhead.
Remedy:	1 Check the LED Printhead (C) for proper installation. Is the LED Printhead (C) properly installed? Go to step 2. Install the LED Printhead (C) properly. 2 Check the event log for the history of errors that occurred 1. Enter the Diagnostics Menu. 2. Navigate to EVENT LOG. 3. Touch Display Event Log. Has any connection-related errors occurred? Go to step “112.02–112.04 LED printhead (C) signal failure”. Replace the LED Printhead (C). Go to “LED printhead removal”.

Error code:	112.02, 112.03, 112.04
Description:	112.02 Service printhead error LED printhead (C) failure 112.03 Service printhead error LED printhead (C) failure 112.04 Service printhead error LED printhead (C) failure
Remedy:	1 Check the LED printhead. Is the above component properly connected? Go to step 2. Replace the connections. Replace the printhead flat data cable. 2 Replace the LED printhead. Go to “LED printhead removal” . Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal” . Problem resolved

Error code:	113.01
Description:	Service printhead error LED printhead (M) failure Open circuit detected in the LED printhead.
Remedy:	1 Check the LED printhead (M) for proper installation. Is the LED printhead (M) properly installed? Go to step 2. Install the LED printhead (M) properly. 2 Check the event log for the history of errors that occurred. 1. Enter the Diagnostics Menu. 2. Navigate to EVENT LOG. 3. Touch Display Event Log. Has any connection-related errors occurred? Go to step “113.02–113.04 LED printhead signal failure (M)”. Replace the LED Printhead (M). Go to “LED printhead removal”.

Error code:	200.01
Display:	200.01
Description:	Input sensor is made when printer tries to print from an idle state. Possible causes: • Paper jam leaving page over sensor • Defective input sensor • Faulty system card
Remedy:	• Check for anything in the paper path that might cause the paper to jam.

Error code:	203
Display:	Power OFF/ON 203:Error ssssssssssssssss
Description:	Polygon motor error 2: OFF timeout
Causes:	The polygon mirror motor does not leave the READY status within 3 sec. after the polygon motor switched off.

Error code:	230
Display:	Service Call 230: Error
Description:	Paper Jam Clear Paper Path Leave Job in Finisher area 5
Causes:	• Defective ASIC (Lupus) • Poor connection between controller and EGB. • Defective EGB
Remedy:	Primary: Paper has most likely jammed in the duplex option. Remove the duplex tray to access the jam. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages indicating the accumulated sheets should not be removed during jam clearing. Note: When the secondary message is displayed, if the accumulated sheets are removed the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled. If removing the jammed media does not fix the problem, go to “230 Paper Jam” on page 2-74.

Error code:	231
Display:	Service Call 231: Error
Description:	FGATE OFF error: Bk • The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position [K]. • The PFGATE ON signal still asserts when the next job starts.
Causes:	• Defective ASIC (Lupus) • Poor connection between controller and EGB. • Defective EGB
Remedy:	1. Check the connection between the controller board and the BCU. 2. Replace the BCU. 3. Replace the controller board.

Error code:	250
Display:	Service Call 250: Error
Description:	Paper Jam Clear Paper Path Leave Job in Finisher area 5
Causes:	• Disconnected or defective harness to synchronizing detector for start position • Defective laser synchronizing detector for start position • Defective LDB
Remedy:	Primary: Paper is jammed in the MPF. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages indicating the accumulated sheets should not be removed during jam clearing. Note: When the secondary message is displayed, if the accumulated sheets are removed the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled. If removing the jammed media does not fix the problem, go to “250 Paper Jam” on page 2-78.

Error code:	281
Description:	GAPCI communication error Data is transferred. - The CPU does not detect the communication ACK signal from GAPCI.
Causes:	• Defective BCU
Remedy:	Jam is detected at the fuser or the bridge unit.

Error code:	34
Description:	Non-continuous labels are being treated as continuous labels.
Causes:	The printer was not calibrated for the media being used. The printer is configured for continuous media.
Remedy:	Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81.

Error code:	35
Description:	All lights are on, but nothing displays on the LCD, and the printer locks up.
Causes:	Internal electronic or firmware failure.
Remedy:	Turn the printer power off (O) and then on (I). If the printer locks up again, replace the main logic board.

Error code:	36
Description:	The printer locks up while running the Power-On Self Test.
Causes:	Main logic board failure.
Remedy:	Replace the main logic board.

Error code:	40
Display:	Scanner locked
Description:	10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run.
Causes:	1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors.
Remedy:	Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board.

Error code:	455
Description:	Staple Jam
Remedy:	A jam is detected at the stapler.

Error code:	50
Display:	Tray 2 Paper Empty
Description:	Fuser Fan Failure The Fuser Fan rotation signal indicates to the Engine Control Board that the fan is no longer operational.
Causes:	• Fuser Fan, PL5.3.31 • FAN/PHD/MOT Harness, PL10.1.9 • Engine Control Board, PL9.1.16
Remedy:	1 Check the Fuser Fan for damage. Remove the Front Cover. Is the fan damaged? Replace the Fuser Fan. Go to Step 2. 2 Check the Fuser Fan connection. Is P/J482 connected to the harness? Go to Step 2. Reconnect the Fan. 3 Check orientation of the Fuser Fan. Does the Fan’s label face into the chute? Go to Step 3. Correct the installation. 4 Test the Fuser Fan. Run the Service Diagnostics Fuser Fan test. Does the Fan operate. Go to Step 6. Go to Step 5. 5 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J482. 2. Check continuity between J48 <=> P483. Go to Step 5. Replace the FAN/PHD/MOT Harness. 6 Check the fan rotation signal. Print one sheet. Is there +3.3 V across P/J48-A12 <=> P/J48-A13? Replace the Engine Control Board. Replace the Fuser Fan.

Error code:	51
Display:	Send Error (DNS)
Description:	Rear Fan Failure The Rear Fan rotation signal indicates the fan is no longer operational.
Causes:	• Rear Fan, PL1.1.19 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16 • LV Harness, PL10.1.2
Remedy:	1 Check the Rear Fan for damage. Remove the Rear Cover. Is the fan damaged? Replace the Rear Fan. Go to Step 2. 2 Check the Rear Fan connection. Is P/J166 connected to the harness? Go to Step 3. Connect the Fan. 3 Check orientation of the Rear Fan. Does the Fan’s label face inwards? Go to Step 4. Correct the installation. 4 Test the Rear Fan. Run the Service Diagnostics Rear Fan test. Does the fan operate? Go to Step 6. Go to Step 5. 5 Check for +24 V to the fan. Disconnect P/J166. Is there +24 V across P166-1 <=> P166-3? Replace the Rear Fan. Replace the LVPS. 6 Check the fan rotation signal to the LVPS. Print one sheet. Is there +3.3 V between P/J166-1 <=> P/J166-3? Replace the Fuser Fan. Go to Step 7. 7 Check the rotation signal from the LVPS. Print one sheet. Is there +3.3 V between P/J165-15 <=> P/J165-3? Replace the LVPS. Go to Step 8. 8 Check the fan rotation signal at the Engine Control Board. Print one sheet. Is there +3.3 V between P/J61-4 <=> P/J61-16? Replace the LV Harness Replace the Engine Control Board.

Error code:	52
Display:	Send Error (POP3)
Description:	Fan Failure One of the two fans has failed resulting in a fatal error.
Causes:	• Rear Fan, PL1.1.19 • Fuser Fan, PL5.3.31
Remedy:	1 Check the fans for damage or debris: • Fuser Fan, PL1.1.19 • Rear Fan, PL5.3.31 Is either fan damaged? Replace the defective fan. Go to Step 3. 2 Replace the defective fan. Does the error persist? Go to Step 3 Complete 3 Test the fans. Run the Service Diagnostics fan tests to isolate the defective fan. Did one of the fans fail? Go to the troubleshooting procedure for the specific fan. If both fans pass, replace the Engine Control Board.

Error code:	53
Display:	Send Error (SMTP)
Description:	The password did not match in a relay or mailbox transmission, and the transmission ended in failure.
Causes:	· Loose cable connection · Defective controller fan · Defective IOD1 board · Defective MCTL board
Remedy:	Confirm that both parties are using the same system password and the both units are compatible. Then, ask the remote party to transmit again.

Error code:	54
Display:	Send Error (Wrong Config)
Description:	10-398 ERROR 54 FAN FAILURE
Causes:	· Loose cable connection · Defective ozone fan · Defective IOD2 board · Defective MCTL board
Remedy:	Enter Service Diagnostics Mode. Run the “Fuser Fan” test. Does the Fuser Fan operate? Y↓N→ Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the voltage between P530-1 on the Engine Control Board and frame ground. Does the voltage measure +24 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-4 on the Engine Control Board and frame ground. Does the voltage measure 0 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-3 on the Engine Control Board and frame ground. Does the voltage measure +5 VDC? Y↓N→ Replace the Engine Control Board. If the problem persists, repair or replace the harness between Engine Control Board and the Fuser Fan. Replace the Fuser Fan Assembly. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the voltage between P530-5 on the Engine Control Board and frame ground. Does the voltage measure +24 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-8 on the Engine Control Board and frame ground. Does the voltage measure 0 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-7 on the Engine Control Board and frame ground. Does the voltage measure +5 VDC? Y↓N→ Replace the Engine Control Board. If the problem persists, repair or replace the harness between Engine Control Board and the +24 VDC LVPS Fan. Replace the +24 VDC LVPS Fan.

Error code:	55
Display:	[Stop Pressed]
Description:	Stop/Clear has been pressed during a fax transmission.
Causes:	· Loose cable connection · Defective fusing unit fan · Defective IOD1 board · Defective MCTL board
Remedy:	Try again.

Error code:	56
Display:	Toner Empty
Description:	The toner cartridge has run out. The machine stops printing.
Causes:	Harness connection failure of back cover switch ASSY. Eject actuator failure. Eject sensor PCB ASSY failure. Main PCB failure
Remedy:	Replace the toner cartridge with a new one.

Error code:	57
Display:	Toner Low
Description:	The toner cartridge is almost empty.
Remedy:	Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations.

Error code:	58
Display:	Tray 1 Paper Empty
Description:	There is no paper in the tray 1.
Causes:	Harness connection failure between fuser unit and eject sensor PCB. Fuser unit failure. LVPS PCB failure. Eject sensor PCB ASSY failure. Main PCB failure
Remedy:	Load paper in the tray 1.

Lexmark C950de

Общие характеристики

Технология печати

Макс. формат

Тип

Телефон

Печать фотографий

Сканер

Копир

Факс

Область применения

Число страниц в месяц

Тип устройства

Размещение

Цветность печати

Принтер

Печать без полей

Пигментные чернила

Прямая печать

Двусторонняя печать

Количество цветов

Макс, разрешение для ч/б печати

Скорость ч/б печати

Время выхода первого отпечатка

Сканер

Стандарт TWAIN

Слайд-адаптер

Отправка изображения по e-mail

Стандарт WIA

Расходные материалы

Количество картриджей

Ресурс цветного картриджа/тонера

Ресурс ч/б картриджа/тонера

Ресурс фотобарабана

Печать на:

Плотность бумаги

Факс

Цветной

PC Fax

Телефон

Проводная трубка

Caller ID

Автоответчик

Стандарт DECT

Спикерфон

Беспроводная трубка

АОН

Шрифты и языки управления

Языки управления

Количество установленных шрифтов

Лотки

Емкость лотка ручной подачи

Подача бумаги

Вывод бумаги

Финишер

Сортировка со сдвигом

Сортер

Брошюровщик

Электронная сортировка

Степлер

Интерфейсы

Версия USB

Ethernet (RJ-45)

USB

Веб-интерфейс

LPT

Устройство для чтения карт памяти

RS-232

FireWire (IEEE 1394)

Wi-Fi

Bluetooth

Инфракрасный порт

Память/Процессор

Макс, объем памяти

Объем памяти

Частота процессора

Дополнительная информация

Диагональ дисплея

Работа от аккумулятора

Экран

Error code:	61
Display:	Nongenuine Toner Replace Toner 1
Description:	The toner cartridge installed is not a genuine cartridge.
Causes:	The printer warms up when the printer is turned on or the cover is closed, or wake from sleep mode.
Remedy:	This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge.

Error code:	62
Display:	Nongenuine Toner Replace Toner
Description:	The toner cartridge installed is not a genuine cartridge.
Causes:	· Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board
Remedy:	This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge.

Error code:	63
Display:	Toner Exhausted
Description:	HOST_IF_NO_DRIVER:PCI
Causes:	Harness connection failure of new toner sensor harness ASSY. Harness connection failure of toner sensor PCB unit ASSY. New toner sensor harness ASSY failure (Toner empty). Toner sensor PCB unit ASSY failure. Main PCB failure.
Remedy:	You can select either stop or continue. It you do not select any, the printer will as stop is selected. If you select stop, you cannot print untill the genuine cartridge is installed. If you select continue, you can keep printing but the guality cannot be guaranteed, and the product svpport is no longer provided. If you wunt to change the selection, turn the printer off and on to gave this message apper again, and then re-select stop or continue.

Error code:	80
Display:	ERROR 80 FORMAT
Description:	Engine Logic Board Failure, Code 80
Remedy:	1. Cycle power to the printer to clear the error. 2. Did this clear the error? Complete Replace the engine control board or the image processor board.

Error code:	84
Display:	h`********
Description:	Controller to Engine Logic Board Time Failure, Code 84
Remedy:	1. Cycle power to the printer to clear the error. 2. Did this clear the error? Complete. Replace the engine control board.

Error code:	88
Display:	Paper Jam
Description:	Lower Tray Communication Failure, Code 88
Causes:	• Engine Control Interface Board • Tray module board • Engine Control board
Remedy:	1 Is J668-1 on the tray module board +5 VDC? Go to step 2. Use the wirenets to troubleshoot and repair the open wire. 2 Is J668-3 on the tray module board +24 VDC? Go to step 3. Use the wirenets to troubleshoot and repair the open wire. 3 1. Check the following connectors for continuity: • P669-1 to J534A-15 • P669-2 to J534A-14 • P669-3 to J534A-13 • P669-4 to J534A-12 • P669-5 to J534A-11 • P669-6 to J534A-10 2. Do all checks indicate continuity? Replace in the following order: • engine control interface board • tray module board • engine control board Check and repair broken wires or bad connectors.