Lexmark X746de

Рейтинг

Снят с производства

Тип устройства

МФУ

Технология печати

лазерная

Макс. формат

Число страниц в месяц

100000

Скорость печати A4

Цветность печати

цветная

Общие характеристики
Число страниц в месяц	100 000
Область применения	большой офис
Сканер
Тип устройства	МФУ
Факс
Копир
Размещение	настольный
Телефон
Печать фотографий
Цветность печати	цветная
Макс. формат	A4
Тип	лазерный/светодиодный
Технология печати	лазерная
Принтер
Пигментные чернила
Печать без полей
Двусторонняя печать
Прямая печать
Количество цветов	4
Макс, разрешение для ч/б печати
По Y	1 200
По X	1 200
Скорость ч/б печати
A4	33
Время выхода первого отпечатка
Цветн,	9
Ч/б	9
Копир
Время выхода первой копии	13
Значение масштаба
Минимальное	0,25
Максимальное	4
Макс, разрешение (ч/б)
По Y	600
Сканер
Тип сканера	планшетный/протяжный
Емкость устройства автоподачи оригиналов	50
Макс. формат оригинала	A4
Устройство автоподачи оригиналов	двустороннее
Слайд-адаптер
Макс, размер сканирования
По Y	355
По X	216
Разрешение сканера
По Х	600
Скорость сканирования
Цветн,	33
Ч/б	34
Расходные материалы
Количество картриджей	4
Ресурс ч/б картриджа/тонера	12 000
Ресурс фотобарабана	20 000
Ресурс цветного картриджа/тонера	7 000
Печать на:
CD/DVD
Рулоне
Фотобумаге
Карточках
Конвертах
Глянцевой бумаге
Этикетках
Матовой бумаге
Пленках
Плотность бумаги
Минимальная	60
Максимальная	218
Факс
Макс, скорость передачи данных	33,6 Кбит/с
Телефон
Caller ID
Спикерфон
Стандарт DECT
Автоответчик
Проводная трубка
Беспроводная трубка
АОН
Шрифты и языки управления
Языки управления
PostScript
PDF
PPDS
PCL 6
PCL 5c
PostScript 3
PostScript 2
Количество установленных шрифтов
PCL	89
PPDS	44
PostScript	158
Лотки
Емкость лотка ручной подачи	100
Подача бумаги
Стандартная	650
Максимальная	4 300
Вывод бумаги
Стандартный	250
Максимальный	250
Финишер
Степлер
Сортер
Брошюровщик
Интерфейсы
Версия USB	2,0
Ethernet (RJ-45)
Веб-интерфейс
USB
Bluetooth
FireWire (IEEE 1394)
Wi-Fi
Устройство для чтения карт памяти
RS-232
Инфракрасный порт
LPT
Память/Процессор
Частота процессора	1 200
Макс, объем памяти	1 536
Объем памяти	512
Дополнительная информация
Диагональ дисплея	7
Экран
Работа от аккумулятора
Поддержка ОС
Windows
Mac OS
Linux
DOS
Потребляемая мощность
В режиме ожидания	55
При работе	560
Уровень шума
В режиме ожидания	34
При работе	59
Габариты
Ширина	546
Высота	787
Вес	44
Глубина	622

Модули

Top

Optional special media tray assembly

Left

Optional 550-sheet media drawer and tray

Automatic document feeder (ADF)

Optional high-capacity input option (HCIT)

Right

Covers-printer

Rear

Flatbed scanner

Covers-scanner

Front

Детали

Деталь:	COOLING FAN
Парткод:	40X5109

Деталь:	Color on demand assembly
Парткод:	40X5122

Деталь:	Top cover camshaft assembly
Парткод:	40X5130

Деталь:	Cartridge cooling fan
Парткод:	40X5108

Деталь:	Special media assembly, including tray
Парткод:	40X5142

Деталь:	Pick tire (550-sheet drawer)
Парткод:	40X5152

Деталь:	Special media tray assembly
Парткод:	40X5143

Деталь:	Contact springs kit
Парткод:	40X5137

Деталь:	Auger shaft and gear parts pack
Парткод:	40X7159

Деталь:	Waste toner HV contact assembly
Парткод:	40X5307

Деталь:	HIGH-VOLTAGE POWER SUPPLY
Парткод:	40X5129

Деталь:	Toner level sensor
Парткод:	40X1416

Деталь:	Toner cartridge contacts
Парткод:	40X8373

Деталь:	550-sheet tray option (drawer and tray assembly)
Парткод:	40X5140

Деталь:	Pick tire (550-sheet tray)
Парткод:	40X5168

Деталь:	550-sheet tray assembly
Парткод:	40X5141

Деталь:	ADF, complete
Парткод:	40X5190

Деталь:	Paper present LED card
Парткод:	40X5210

Деталь:	ADF hinge (left or right)
Парткод:	40X5209

Деталь:	ADF exit sensor with cable
Парткод:	40X5166

Деталь:	Scanner ICC card
Парткод:	40X5220

Деталь:	ADF pick pad
Парткод:	40X5189

Деталь:	ADF static ground brush
Парткод:	40X5165

Деталь:	Separator pad spring
Парткод:	40X5163

Деталь:	ADF separator pad
Парткод:	40X5187

Деталь:	ADF upper case cover
Парткод:	40X5197

Деталь:	ADF pick roll assembly
Парткод:	40X5188

Деталь:	ADF motor gear train assembly
Парткод:	40X5208

Деталь:	ADF front case assembly
Парткод:	40X5195

Деталь:	ADF cover open flag
Парткод:	40X5191

Деталь:	ADF skew card
Парткод:	40X5291

Деталь:	Top plate assembly
Парткод:	40X5157

Деталь:	HCIT pick tire
Парткод:	40X5168

Деталь:	Feed with bushing
Парткод:	40X5156

Деталь:	HCIT rear cover
Парткод:	40X5149

Деталь:	Tray latch with spring
Парткод:	40X4585

Деталь:	HCIT controller card assembly
Парткод:	40X5159

Деталь:	Slide assembly with springs
Парткод:	40X4587

Деталь:	HCIT right cover
Парткод:	40X5147

Деталь:	Elevator motor with sensor
Парткод:	40X5155

Деталь:	Photointerrupter sensor with cable assembly
Парткод:	40X5158

Деталь:	HCIT drawer slide assembly
Парткод:	40X4593

Деталь:	HCIT front tray cover
Парткод:	40X5146

Деталь:	HCIT paper drawer tray assembly
Парткод:	40X5144

Деталь:	HCIT left cover
Парткод:	40X5148

Деталь:	EP drive assembly
Парткод:	40X5290

Деталь:	LOW-VOLTAGE POWER SUPPLY
Парткод:	40X7709

Деталь:	Motor driver card
Парткод:	40X5126

Деталь:	MP feeder/duplex motor
Парткод:	40X8309

Деталь:	24 V interlock switch
Парткод:	40X5128

Деталь:	MPF paper present sensor with cable
Парткод:	40X5998

Деталь:	5 V interlock switch
Парткод:	40X5127

Деталь:	Output bin extension cover
Парткод:	40X5164

Деталь:	Top cover assembly, including top access cover springs
Парткод:	40X5175

Деталь:	Top access cover springs
Парткод:	40X5276

Деталь:	REAR COVER
Парткод:	40X5174

Деталь:	Bin full sensor with cable
Парткод:	40X5121

Деталь:	Top access cover parts package, including:
Парткод:	40X5180

Деталь:	Cooling fan filter
Парткод:	40X5287

Деталь:	Rear frame cover
Парткод:	40X8319

Деталь:	RIGHT COVER
Парткод:	40X5172

Деталь:	Front access door cover assembly
Парткод:	40X5184

Деталь:	LEFT COVER
Парткод:	40X5173

Деталь:	Left door cover
Парткод:	40X5221

Деталь:	Operator panel bezel, X746de
Парткод:	40X7960

Деталь:	Operator panel bezel, X748de
Парткод:	40X7961

Деталь:	LCD bracket assembly
Парткод:	40X7967

Деталь:	SPEAKER
Парткод:	40X7703

Деталь:	7 inch LCD touch screen
Парткод:	40X7861

Деталь:	UICC and interface card
Парткод:	40X7955

Деталь:	Parts pack (operator panel buttons)
Парткод:	40X7956

Деталь:	Top access cover assembly
Парткод:	40X7662

Деталь:	Printhead assembly
Парткод:	40X5123

Деталь:	System board support shield
Парткод:	40X5107

Деталь:	System board
Парткод:	40X5997

Деталь:	CPU Fan
Парткод:	40X8856

Деталь:	Power cordUSA, Canada, Bolivia, Peru
Парткод:	40X0269

Деталь:	Power cord (8 ft.)Argentina
Парткод:	40X0288

Деталь:	Power cord (8 ft.)Australia, New Zealand
Парткод:	40X0301

Деталь:	Power cord (8 ft.)Austria, Belgium, Catalan, Czechoslovakia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Netherlands, Norway, Paraguay, Poland, Portugal, Russia, Spain, Sweden, Turkey, United Kingdom
Парткод:	40X3141

Деталь:	Power cord (8 ft.)United Kingdom
Парткод:	40X0271

Деталь:	Power cord (8 ft.)Brazil
Парткод:	40X4596

Деталь:	Power cord (8 ft.)Chile, Uruguay
Парткод:	40X0273

Деталь:	Power cord (8 ft.)China
Парткод:	40X0303

Деталь:	Power cord (8 ft.)Denmark, Finland, Norway, Sweden
Парткод:	40X1774

Деталь:	Power cord (8 ft.)Israel
Парткод:	40X0275

Деталь:	Power cord (8 ft.)Japan
Парткод:	40X3609

Деталь:	Power cord (8 ft.)Korea
Парткод:	40X1792

Деталь:	Power cord (8 ft.)South Africa
Парткод:	40X1773

Деталь:	Power cord (8 ft.)Switzerland
Парткод:	40X1772

Деталь:	Power cord (8 ft.)Taiwan
Парткод:	40X1791

Деталь:	Flatbed scanner, complete
Парткод:	40X7959

Деталь:	Cave LED card
Парткод:	40X5215

Деталь:	Flatbed cave LED cover (clear)
Парткод:	40X5216

Деталь:	Flatbed CCD carrier module, including lamp assembly
Парткод:	40X7957

Деталь:	Carriage transport belt with clip
Парткод:	40X5214

Деталь:	Scanner MDC card
Парткод:	40X7975

Деталь:	Flatbed cooling fan
Парткод:	40X5199

Деталь:	Parts packet, cables)
Парткод:	40X5217

Деталь:	ADF front case cover
Парткод:	40X5196

Деталь:	ADF upper motor side cover
Парткод:	40X5202

Деталь:	ADF document input tray
Парткод:	40X5192

Деталь:	ADF paper stop
Парткод:	40X5193

Деталь:	Pressure plate cover
Парткод:	40X5194

Деталь:	Flatbed filter door cover
Парткод:	40X5198

Деталь:	Flatbed air filter
Парткод:	40X5218

Деталь:	Scanner rear cover
Парткод:	40X5207

Деталь:	Scanner right cover
Парткод:	40X5205

Деталь:	Scanner front cover
Парткод:	40X5206

Деталь:	Scanner left cover
Парткод:	40X5204

Деталь:	Flatbed with glass cover
Парткод:	40X5211

Деталь:	ADF upper front side cover
Парткод:	40X5203

Деталь:	ADF lid handle cover
Парткод:	40X5201

Деталь:	Fuser assembly, 115 V
Парткод:	40X8110

Деталь:	Fuser assembly, 230 V
Парткод:	40X8111

Деталь:	Fuser assembly, 100 V
Парткод:	40X8112

Деталь:	Right bellcrank assembly, with spring
Парткод:	40X1446

Деталь:	Parts packet, MP feeder/duplex drive, including:
Парткод:	40X5132

Деталь:	Cranklift spring and metal clip
Парткод:	40X6319

Деталь:	Paper pick assembly
Парткод:	40X8308

Деталь:	Pick tire
Парткод:	40X5152

Деталь:	Paper tray assembly, 550-sheet
Парткод:	40X5999

Деталь:	MPF pick arm
Парткод:	40X6496

Деталь:	Parts packet, front door, including:
Парткод:	40X5111

Деталь:	Duplex reference edge assembly
Парткод:	40X5113

Деталь:	Front access door assembly
Парткод:	40X5995

Деталь:	Transfer module
Парткод:	40X6401

Деталь:	Left bellcrank assembly, with spring
Парткод:	40X1447

Деталь:	Cartridge guide wheels
Парткод:	40X8554

Коды ошибок

110.01..110.07

111.01, 111.02

112.01, 112.02

113.01, 113.02

114.01, 114.02

120.00 ... 120.21

140.01 ... 140.10

142.09 ... 142.27

143.09 ... 143.27

144.09 ... 144.27

145.09 ... 145.27

146.01 ... 146.08

147.09 ... 147.25

148.01 ... 148.08

155.01, 155.03

156.01, 156.03

160.01 ... 160.06

161.01 ... 161.06

162.01 ... 162.06

163.01 ... 163.06

164.01 ... 164.06

165.01 ... 165.06

166.01 ... 166.06

167.01 ... 167.06

168.xx

199.xx

80.11, 80.14

80.21, 80.24

80.31, 80.34

80.41

82.11

82.21

82.41

83.41

83.xx

840.01

840.02

841.xx

842.00

843.00

843.01 ... 843.04

844.00 ... 844.08

845.00, 845.02

846.00 ... 846.05

848.01

849.00

849.01

900.00 ... 900.99

900.05

902.01 ... 902.99

902.59

902.60

903.01 ... 903.15

904.01 ... 904.04

905.00 ... 905.99

910.xx

920.01

920.02

920.03

920.04

920.05

920.06

920.07

920.08

920.09

920.10

920.11

920.12

920.13

920.14

920.15, 920.20

920.16

920.17

920.18

920.19

920.21

920.22

920.23

920.25

920.26

920.27 ... 920.29

920.30

920.31

920.32

925.01, 925.03, 925.05

925.02, 925.04, 925.06

945.xx ... 947.xx

950.00 ... 950.29

951.01 ... 951.99

952.01 ... 952.99

953.01 ... 953.99

954.01 ... 954.99

955.01 ... 955.99

956.01 ... 956.99

957.00 ... 957.99

958.01 ... 958.99

959.00..959.05

959.20 ... 959.28

960.01 ... 960.99

961.01 ... 961.99

962.00 ... 962.99

963.00 ... 963.99

964.00 ... 964.88

975.00 ... 975.99

976.00 ... 976.99

978.00 ... 978.99

979.00 ... 979.99

980.00 ... 980.99

981.00 ... 981.99

982.00 ... 982.12

983.00 ... 983.99

984.00 ... 984.99

990.00 ... 990.29

991.00 ... 991.29

Описание

Парткод

Название

LEXMARK Блок фотобарабана

LEXMARK Блок фотобарабана, упаковка 4 шт.

LEXMARK Емкость для отработанного тонера

LEXMARK Тонер-картридж голубой (7K), Return

LEXMARK Тонер-картридж пурпурный (7K), Return

LEXMARK Тонер-картридж желтый (7K), Return

LEXMARK Тонер-картридж голубой (7K)

LEXMARK Тонер-картридж пурпурный (7K), Return

LEXMARK Тонер-картридж желтый (7K)

LEXMARK Тонер-картридж черный (12K), Return

LEXMARK Тонер-картридж черный (12K)

Error code:	110.01..110.07
Description:	Mirror Motor A mirror motor error has occurred.
Remedy:	1 View the Event Log: 1. Enter Diagnostics mode (press and hold buttons 3 and 6, turn on the MFP, and release the buttons when the progress bar displays). 2. Touch EVENT LOG from Diagnostics Menu. 3. Touch Display Log. Has an 110.xx error occurred three times or more? Replace the printhead. See “Printhead removal, installation, and adjustment”. Go to step 2. 2 1. Turn the printer off, and then remove the rear frame cover. See “Rear frame cover removal”. 2. Check the cable in connector JMIRR1 for proper connection to the system board, the printhead cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the printhead. See “Printhead removal, installation, and adjustment”. Go to step 3. 3 Measure the continuity across all of the fuses on the system board. Are any of the fuses blown? Replace the system board. See “System board removal”. Go to step 4. 4 1. Perform the printhead verification to check whether the new printhead will solve the problem. See “Printhead verification”. 2. Perform the Mirror Motor Test. Bring the printer up in the Diagnostics menu (turn off the printer, press and hold 3 and 6, turn on the printer.) See “Mirror Motor Test”. Did the Mirror Motor pass the test? Replace the printhead. See “Printhead removal, installation, and adjustment”. Replace the system board. See “System board removal”.

Error code:	146.01 ... 146.08
Display:	146.01–146.08 Motor Error
Description:	Duplex motor has failed.
Remedy:	1 Is the top access door completely closed? Go to step 2. Close the top access door. 2 Turn the printer off, and remove the rear cover. Check the connector JDUPLX1 for proper connection to the system card, the cable for pinch points, and the cable or connector for any other damage. Is the cable damaged? Replace the duplex front door assembly. Go to step 3. 3 Close the front access door. Turn the power on, and check for 24 V dc between JCVR1 pin 1 (red wire) and ground. Note: The ground lead of the voltmeter can be placed on the metal frame to obtain ground. Is voltage present? Replace the top access door 24 V interlock switch. Go to step 4. 4 Replace the duplex front door assembly. Does the error clear? Problem solved. Replace the system card.

Error code:	31
Description:	The LCD is missing characters or parts of characters
Causes:	The LCD may need replacing.
Remedy:	Run the Power-On Self Test on page 117 and check that the LCD display shows all characters. If not, replace the LCD.

Error code:	32
Description:	Changes in parameter settings did not take effect
Causes:	Parameters are set incorrectly. A command turned off the ability to change the parameter. A command changed the parameter back to the previous setting. If the problem continues, there may be a problem with the main logic board.
Remedy:	1. Set parameters and save permanently. 2. Turn the printer off (O) and then on (I). Refer to the ZPL Programming Guide. Refer to the ZPL Programming Guide. Replace the main logic board.

Error code:	34
Description:	Non-continuous labels are being treated as continuous labels.
Causes:	The printer was not calibrated for the media being used. The printer is configured for continuous media.
Remedy:	Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81.

Error code:	35
Description:	All lights are on, but nothing displays on the LCD, and the printer locks up.
Causes:	Internal electronic or firmware failure.
Remedy:	Turn the printer power off (O) and then on (I). If the printer locks up again, replace the main logic board.

Error code:	39
Description:	The printer locks up while running the Power-On Self Test.
Causes:	Main logic board failure.
Remedy:	Replace the main logic board.

Error code:	50
Display:	Tray 2 Paper Empty
Description:	Fuser Fan Failure The Fuser Fan rotation signal indicates to the Engine Control Board that the fan is no longer operational.
Causes:	• Fuser Fan, PL5.3.31 • FAN/PHD/MOT Harness, PL10.1.9 • Engine Control Board, PL9.1.16
Remedy:	1 Check the Fuser Fan for damage. Remove the Front Cover. Is the fan damaged? Replace the Fuser Fan. Go to Step 2. 2 Check the Fuser Fan connection. Is P/J482 connected to the harness? Go to Step 2. Reconnect the Fan. 3 Check orientation of the Fuser Fan. Does the Fan’s label face into the chute? Go to Step 3. Correct the installation. 4 Test the Fuser Fan. Run the Service Diagnostics Fuser Fan test. Does the Fan operate. Go to Step 6. Go to Step 5. 5 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J482. 2. Check continuity between J48 <=> P483. Go to Step 5. Replace the FAN/PHD/MOT Harness. 6 Check the fan rotation signal. Print one sheet. Is there +3.3 V across P/J48-A12 <=> P/J48-A13? Replace the Engine Control Board. Replace the Fuser Fan.

Error code:	51
Display:	Send Error (DNS)
Description:	Rear Fan Failure The Rear Fan rotation signal indicates the fan is no longer operational.
Causes:	• Rear Fan, PL1.1.19 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16 • LV Harness, PL10.1.2
Remedy:	1 Check the Rear Fan for damage. Remove the Rear Cover. Is the fan damaged? Replace the Rear Fan. Go to Step 2. 2 Check the Rear Fan connection. Is P/J166 connected to the harness? Go to Step 3. Connect the Fan. 3 Check orientation of the Rear Fan. Does the Fan’s label face inwards? Go to Step 4. Correct the installation. 4 Test the Rear Fan. Run the Service Diagnostics Rear Fan test. Does the fan operate? Go to Step 6. Go to Step 5. 5 Check for +24 V to the fan. Disconnect P/J166. Is there +24 V across P166-1 <=> P166-3? Replace the Rear Fan. Replace the LVPS. 6 Check the fan rotation signal to the LVPS. Print one sheet. Is there +3.3 V between P/J166-1 <=> P/J166-3? Replace the Fuser Fan. Go to Step 7. 7 Check the rotation signal from the LVPS. Print one sheet. Is there +3.3 V between P/J165-15 <=> P/J165-3? Replace the LVPS. Go to Step 8. 8 Check the fan rotation signal at the Engine Control Board. Print one sheet. Is there +3.3 V between P/J61-4 <=> P/J61-16? Replace the LV Harness Replace the Engine Control Board.

Error code:	52
Display:	Send Error (POP3)
Description:	Fan Failure One of the two fans has failed resulting in a fatal error.
Causes:	• Rear Fan, PL1.1.19 • Fuser Fan, PL5.3.31
Remedy:	1 Check the fans for damage or debris: • Fuser Fan, PL1.1.19 • Rear Fan, PL5.3.31 Is either fan damaged? Replace the defective fan. Go to Step 3. 2 Replace the defective fan. Does the error persist? Go to Step 3 Complete 3 Test the fans. Run the Service Diagnostics fan tests to isolate the defective fan. Did one of the fans fail? Go to the troubleshooting procedure for the specific fan. If both fans pass, replace the Engine Control Board.

Error code:	53
Display:	Send Error (SMTP)
Description:	The password did not match in a relay or mailbox transmission, and the transmission ended in failure.
Causes:	· Loose cable connection · Defective controller fan · Defective IOD1 board · Defective MCTL board
Remedy:	Confirm that both parties are using the same system password and the both units are compatible. Then, ask the remote party to transmit again.

Error code:	54
Display:	Send Error (Wrong Config)
Description:	10-398 ERROR 54 FAN FAILURE
Causes:	· Loose cable connection · Defective ozone fan · Defective IOD2 board · Defective MCTL board
Remedy:	Enter Service Diagnostics Mode. Run the “Fuser Fan” test. Does the Fuser Fan operate? Y↓N→ Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the voltage between P530-1 on the Engine Control Board and frame ground. Does the voltage measure +24 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-4 on the Engine Control Board and frame ground. Does the voltage measure 0 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-3 on the Engine Control Board and frame ground. Does the voltage measure +5 VDC? Y↓N→ Replace the Engine Control Board. If the problem persists, repair or replace the harness between Engine Control Board and the Fuser Fan. Replace the Fuser Fan Assembly. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the voltage between P530-5 on the Engine Control Board and frame ground. Does the voltage measure +24 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-8 on the Engine Control Board and frame ground. Does the voltage measure 0 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-7 on the Engine Control Board and frame ground. Does the voltage measure +5 VDC? Y↓N→ Replace the Engine Control Board. If the problem persists, repair or replace the harness between Engine Control Board and the +24 VDC LVPS Fan. Replace the +24 VDC LVPS Fan.

Error code:	55
Display:	[Stop Pressed]
Description:	Stop/Clear has been pressed during a fax transmission.
Causes:	· Loose cable connection · Defective fusing unit fan · Defective IOD1 board · Defective MCTL board
Remedy:	Try again.

Error code:	56
Display:	Toner Empty
Description:	The toner cartridge has run out. The machine stops printing.
Causes:	Harness connection failure of back cover switch ASSY. Eject actuator failure. Eject sensor PCB ASSY failure. Main PCB failure
Remedy:	Replace the toner cartridge with a new one.

Error code:	57
Display:	Toner Low
Description:	The toner cartridge is almost empty.
Remedy:	Take out the toner cartridge and thoroughly shake it. By doing this, you can temporarily reestablish printing operations.

Error code:	58
Display:	Tray 1 Paper Empty
Description:	There is no paper in the tray 1.
Causes:	Harness connection failure between fuser unit and eject sensor PCB. Fuser unit failure. LVPS PCB failure. Eject sensor PCB ASSY failure. Main PCB failure
Remedy:	Load paper in the tray 1.

Error code:	61
Display:	Nongenuine Toner Replace Toner 1
Description:	The toner cartridge installed is not a genuine cartridge.
Causes:	The printer warms up when the printer is turned on or the cover is closed, or wake from sleep mode.
Remedy:	This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge.

Error code:	62
Display:	Nongenuine Toner Replace Toner
Description:	The toner cartridge installed is not a genuine cartridge.
Causes:	· Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board
Remedy:	This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge.

Error code:	63
Display:	Toner Exhausted
Description:	HOST_IF_NO_DRIVER:PCI
Causes:	Harness connection failure of new toner sensor harness ASSY. Harness connection failure of toner sensor PCB unit ASSY. New toner sensor harness ASSY failure (Toner empty). Toner sensor PCB unit ASSY failure. Main PCB failure.
Remedy:	You can select either stop or continue. It you do not select any, the printer will as stop is selected. If you select stop, you cannot print untill the genuine cartridge is installed. If you select continue, you can keep printing but the guality cannot be guaranteed, and the product svpport is no longer provided. If you wunt to change the selection, turn the printer off and on to gave this message apper again, and then re-select stop or continue.

Error code:	64
Display:	Toner Exhausted Replace Toner 1
Description:	Cover Open
Causes:	The Printer Cover is open or Toner Cartridge not installed.

Lexmark X746de

Общие характеристики

Число страниц в месяц

Область применения

Сканер

Тип устройства

Факс

Копир

Размещение

Телефон

Печать фотографий

Цветность печати

Макс. формат

Тип

Технология печати

Принтер

Пигментные чернила

Печать без полей

Двусторонняя печать

Прямая печать

Количество цветов

Макс, разрешение для ч/б печати

Скорость ч/б печати

Время выхода первого отпечатка

Копир

Время выхода первой копии

Значение масштаба

Макс, разрешение (ч/б)

Сканер

Тип сканера

Емкость устройства автоподачи оригиналов

Макс. формат оригинала

Устройство автоподачи оригиналов

Слайд-адаптер

Макс, размер сканирования

Разрешение сканера

Скорость сканирования

Расходные материалы

Количество картриджей

Ресурс ч/б картриджа/тонера

Ресурс фотобарабана

Ресурс цветного картриджа/тонера

Печать на:

Плотность бумаги

Факс

Макс, скорость передачи данных

Телефон

Caller ID

Спикерфон

Стандарт DECT

Автоответчик

Проводная трубка

Беспроводная трубка

АОН

Шрифты и языки управления

Языки управления

Количество установленных шрифтов

Лотки

Емкость лотка ручной подачи

Подача бумаги

Вывод бумаги

Финишер

Степлер

Сортер

Брошюровщик

Интерфейсы

Версия USB

Ethernet (RJ-45)

Веб-интерфейс

USB

Bluetooth

FireWire (IEEE 1394)

Wi-Fi

Устройство для чтения карт памяти

RS-232

Инфракрасный порт

LPT

Память/Процессор

Частота процессора

Макс, объем памяти

Error code:	80
Display:	ERROR 80 FORMAT
Description:	Engine Logic Board Failure, Code 80
Remedy:	1. Cycle power to the printer to clear the error. 2. Did this clear the error? Complete Replace the engine control board or the image processor board.

Error code:	83
Display:	h`********
Description:	Engine Logic Board NVRAM Failure, Code 83
Remedy:	1. Cycle power to the printer to clear the error. 2. Did this clear the error? Complete. Replace in the following order: • engine control board • image processor board

Error code:	88
Display:	Paper Jam
Description:	Lower Tray Communication Failure, Code 88
Causes:	• Engine Control Interface Board • Tray module board • Engine Control board
Remedy:	1 Is J668-1 on the tray module board +5 VDC? Go to step 2. Use the wirenets to troubleshoot and repair the open wire. 2 Is J668-3 on the tray module board +24 VDC? Go to step 3. Use the wirenets to troubleshoot and repair the open wire. 3 1. Check the following connectors for continuity: • P669-1 to J534A-15 • P669-2 to J534A-14 • P669-3 to J534A-13 • P669-4 to J534A-12 • P669-5 to J534A-11 • P669-6 to J534A-10 2. Do all checks indicate continuity? Replace in the following order: • engine control interface board • tray module board • engine control board Check and repair broken wires or bad connectors.