Lexmark X954dhe
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
светодиодная
Макс. формат
A3
Число страниц в месяц
250000
Скорость печати
A4
55
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Печать фотографий |
|
Цветность печати |
цветная |
Телефон |
|
Тип устройства |
МФУ |
Факс |
|
Сканер |
|
Копир |
|
Тип |
лазерный/светодиодный |
Технология печати |
светодиодная |
Область применения |
большой офис |
Размещение |
напольный |
Макс. формат |
A3 |
Число страниц в месяц |
250 000 |
Принтер |
|
Макс, ширина отпечатка |
297 |
Макс, длина отпечатка |
420 |
Печать без полей |
|
Пигментные чернила |
|
Количество цветов |
4 |
Прямая печать |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
| По X | 1 200 |
| По Y | 1 200 |
Скорость ч/б печати |
|
| A4 | 55 |
| A4 | 50 |
Время выхода первого отпечатка |
|
| Цветн, | 7,2 |
| Ч/б | 5 |
Копир |
|
Время выхода первой копии |
9,9 |
Макс, количество копий за цикл |
999 |
Значение масштаба |
|
| Максимальное | 4 |
| Минимальное | 0,25 |
Макс, разрешение (ч/б) |
|
| По X | 1 200 |
| По Y | 1 200 |
| По Y | 600 |
Сканер |
|
Макс. формат оригинала |
A4 |
Стандарт WIA |
|
Стандарт TWAIN |
|
Слайд-адаптер |
|
Тип датчика сканера |
ПЗС (CCD) |
Устройство автоподачи оригиналов |
одностороннее |
Тип сканера |
планшетный/протяжный |
Отправка изображения по e-mail |
|
Емкость устройства автоподачи оригиналов |
110 |
Макс, размер сканирования |
|
| По X | 297 |
| По Y | 432 |
Разрешение сканера |
|
| По Х | 600 |
Скорость сканирования |
|
| Цветн, | 52 |
| Ч/б | 68 |
Расходные материалы |
|
Количество картриджей |
4 |
Ресурс цветного картриджа/тонера |
11 000 |
Ресурс ч/б картриджа/тонера |
16 000 |
Ресурс фотобарабана |
115 000 |
Печать на: |
|
| Фотобумаге |
|
| Рулоне |
|
| CD/DVD |
|
| Пленках |
|
| Конвертах |
|
| Карточках |
|
| Матовой бумаге |
|
| Этикетках |
|
| Глянцевой бумаге |
|
Плотность бумаги |
|
| Максимальная | 256 |
| Минимальная | 60 |
Факс |
|
Цветной |
|
PC Fax |
|
Макс, скорость передачи данных |
33,6 Кбит/с |
Телефон |
|
Caller ID |
|
Беспроводная трубка |
|
Спикерфон |
|
АОН |
|
Стандарт DECT |
|
Автоответчик |
|
Проводная трубка |
|
Шрифты и языки управления |
|
Языки управления |
|
| PCL 5e |
|
| PostScript 2 |
|
| PPDS |
|
| PostScript 3 |
|
| PCL 5c |
|
| PostScript |
|
|
|
|
| PCL 6 |
|
Количество установленных шрифтов |
|
| PostScript | 158 |
| PCL | 84 |
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Максимальная | 5 140 |
| Стандартная | 3 140 |
Вывод бумаги |
|
| Максимальный | 3 750 |
| Стандартный | 500 |
Финишер |
|
Сортировка со сдвигом |
|
Сортер |
|
Электронная сортировка |
|
Степлер |
|
Брошюровщик |
|
Интерфейсы |
|
Ethernet (RJ-45) |
|
Веб-интерфейс |
|
USB |
|
FireWire (IEEE 1394) |
|
Устройство для чтения карт памяти |
|
Wi-Fi |
|
Bluetooth |
|
LPT |
|
RS-232 |
|
Инфракрасный порт |
|
Версия USB |
2,0 |
Память/Процессор |
|
Частота процессора |
1 200 |
Объем памяти |
2 048 |
Макс, объем памяти |
2 048 |
Дополнительная информация |
|
Работа от аккумулятора |
|
Экран |
|
Диагональ дисплея |
10,2 |
Поддержка ОС |
|
| Mac OS |
|
| Windows |
|
| Linux |
|
| DOS |
|
Потребляемая мощность |
|
| В режиме ожидания | 115 |
| При работе | 850 |
Уровень шума |
|
| При работе | 55 |
| В режиме ожидания | 24 |
Габариты |
|
Вес |
159,57 |
Высота |
1 125 |
Ширина |
640 |
Глубина |
685 |
Модули
Tray module media transport 2
Redrive 2
Booklet maker 9
Electrical 1
High capacity feed (HCF)-media feed unit 1
ADF drive
Finisher-media drive 3
Developer 1
Printer covers 2
Photoconductor
Tray module covers 2
ADF LED PCB
High capacity feed (HCF)-media tray lift
Transfer belt 1
Finisher-stacker bin lift
Platen glass
Finisher-buffer, transport, and upper drive
Drive 2
ADF sensors 1
High capacity feed (HCF)-covers and media tray
Scanner interface cable
Tray module media transport 1
TTM drive 2
1TM covers
Printer covers 1
ADF sensors 3
Media feed 2
ADF sensors 2
2nd transfer roller
1TM front cover
High capacity feed (HCF)-media tray
TTM media feed 2
Electrical 2
Printer covers 3
Waste toner transfer
Redrive 1
MPF
Electrical 3
Booklet maker 7
Developer 2
Finisher-punch
Fuser
Booklet maker 6
1TM left door
High capacity feed (HCF)-drive and electrical
Cooling fans 1
Media feed 1
TTM covers
Finisher-covers and front door
Finisher-lower exit drive
HVPS
Finisher-bridge top door assembly
ADF media guide
Printhead 2
Finisher-media drive 1
TTM left door
TTM media feed 1
Booklet maker 8
Finisher-media eject
Booklet maker 3
Scanner optics
CCD assembly
Finisher-media drive 2
TTM drive 1
Finisher-upper drive
Registration drive
ADF ASSEMBLY
Scanner covers
Base wiring cables
Transfer belt 2
Finisher-covers
TTM trays
TTM tray support
Cooling fans 2
Finisher-stapler
ADF base
Cooling fans 3
ADF covers and components 1
Carriage drive
Tray module media feed
High capacity feed (HCF)-top door and transport
Operator panel covers (MFP) 1
Booklet maker 4
Printhead 1
Booklet maker 5
TTM cables
Booklet maker 2
Media feed 4
Finisher-buffer and entrance drive
Finisher-bridge unit
Drive 1
Printer left duplex door
ADF covers and components 2
Tray module covers 1
Operator panel (MFP)
Booklet maker 1
Finisher-cables
Media feed 3
Scanner controller board
1TM cables
Drive 3
Electrical 4
Finisher-electronics
High capacity feed (HCF)-media feed unit 2
Finisher-eject and compiler unit
Operator panel covers (MFP) 2
ADF left door
Детали Operator panel (MFP)
| Деталь: | BEARING |
| Парткод: | 40X3915 |
| Деталь: | Sensor tray (module feed out) |
| Парткод: | 40X6675 |
| Деталь: | Tray module transport roller |
| Парткод: | 40X6677 |
| Деталь: | Lower redrive shaft assembly |
| Парткод: | 40X7472 |
| Деталь: | Lower redrive shift motor assembly |
| Парткод: | 40X6725 |
| Деталь: | Booklet fold solenoid |
| Парткод: | 40X7497 |
| Деталь: | Booklet rear gear bracket |
| Парткод: | 40X7524 |
| Деталь: | Booklet gear 27/34T |
| Парткод: | 40X4019 |
| Деталь: | Gear 18/39T |
| Парткод: | 40X4024 |
| Деталь: | Booklet gear 45T |
| Парткод: | 40X4015 |
| Деталь: | Booklet gear 16/44T |
| Парткод: | 40X4017 |
| Деталь: | Booklet sensor interface cable assembly |
| Парткод: | 40X7501 |
| Деталь: | Booklet motor interface cable assembly |
| Парткод: | 40X7499 |
| Деталь: | Booklet stapler interface cable assembly |
| Парткод: | 40X7498 |
| Деталь: | SPRING |
| Парткод: | 40X4020 |
| Деталь: | Controller cooling fan |
| Парткод: | 40X6728 |
| Деталь: | SUCTION FAN |
| Парткод: | 40X6729 |
| Деталь: | Suction fan duct |
| Парткод: | 40X6733 |
| Деталь: | HCF interface contact |
| Парткод: | 40X6732 |
| Деталь: | Upper printer engine PCBA |
| Парткод: | 40X6730 |
| Деталь: | Lower engine PCBA |
| Парткод: | 40X6731 |
| Деталь: | RIP card PCBA (MFP) |
| Парткод: | 40X7500 |
| Деталь: | Bridge PCBA (MFP) |
| Парткод: | 40X7464 |
| Деталь: | HCF feed lift motor |
| Парткод: | 40X0759 |
| Деталь: | HCF feed lift gear bracket |
| Парткод: | 40X0760 |
| Деталь: | Ball bearing 6 mm |
| Парткод: | 40X0913 |
| Деталь: | HCF separation drive gear kit |
| Парткод: | 40X0761 |
| Деталь: | HCF pick roller raise lever |
| Парткод: | 40X6790 |
| Деталь: | HCF media tray lift coupling kit |
| Парткод: | 40X0763 |
| Деталь: | HCF separation roller shaft assembly |
| Парткод: | 40X0771 |
| Деталь: | ADF sensor 1 cable |
| Парткод: | 40X6813 |
| Деталь: | ADF sensor 2 cable |
| Парткод: | 40X6815 |
| Деталь: | SPRING |
| Парткод: | 40X2348 |
| Деталь: | ADF registration motor |
| Парткод: | 40X6811 |
| Деталь: | ADF feed motor spring |
| Парткод: | 40X6812 |
| Деталь: | ADF feed motor |
| Парткод: | 40X6810 |
| Деталь: | Sensor (ADF top door interlock) |
| Парткод: | 40X6809 |
| Деталь: | ADF motor cable |
| Парткод: | 40X6814 |
| Деталь: | Bridge decurler roll |
| Парткод: | 40X6854 |
| Деталь: | Bridge gear 27T/18T |
| Парткод: | 40X6859 |
| Деталь: | Bridge gear 24T/20T |
| Парткод: | 40X6858 |
| Деталь: | Bridge upper drive belt |
| Парткод: | 40X7413 |
| Деталь: | Bridge drive retainer |
| Парткод: | 40X7410 |
| Деталь: | Bridge decurler arm |
| Парткод: | 40X6853 |
| Деталь: | BUSHING |
| Парткод: | 40X1388 |
| Деталь: | Bridge gear 16T |
| Парткод: | 40X6856 |
| Деталь: | Bridge gear 36T/18T |
| Парткод: | 40X6852 |
| Деталь: | Bridge drive motor |
| Парткод: | 40X6860 |
| Деталь: | Bridge lower drive belt |
| Парткод: | 40X7412 |
| Деталь: | Bridge gear 18T/36T |
| Парткод: | 40X6857 |
| Деталь: | Sensor (bridge media exit) |
| Парткод: | 40X6855 |
| Деталь: | Toner dispense motor |
| Парткод: | 40X6601 |
| Деталь: | Toner smart chip PCB |
| Парткод: | 40X6602 |
| Деталь: | K toner drop auger |
| Парткод: | 40X6606 |
| Деталь: | C toner drop auger |
| Парткод: | 40X6605 |
| Деталь: | M toner drop auger |
| Парткод: | 40X6604 |
| Деталь: | Y toner drop auger |
| Парткод: | 40X6603 |
| Деталь: | CMYK toner dispense auger assembly |
| Парткод: | 40X6607 |
| Деталь: | Standard bin insert |
| Парткод: | 40X6772 |
| Деталь: | Printer top cover |
| Парткод: | 40X6774 |
| Деталь: | Internal top cover (MFP) |
| Парткод: | 40X6779 |
| Деталь: | Left upper cover (MFP) |
| Парткод: | 40X6777 |
| Деталь: | Left rear lower cover |
| Парткод: | 40X6776 |
| Деталь: | Left rear upper cover (MFP) |
| Парткод: | 40X6775 |
| Деталь: | Upper internal bin |
| Парткод: | 40X7764 |
| Деталь: | Internal rear cover (MFP) |
| Парткод: | 40X6780 |
| Деталь: | Erase lamp |
| Парткод: | 40X6636 |
| Деталь: | PC smart chip cover |
| Парткод: | 40X6634 |
| Деталь: | PC smart chip holder |
| Парткод: | 40X6633 |
| Деталь: | PC smart chip socket |
| Парткод: | 40X6635 |
| Деталь: | TORSION SPRING |
| Парткод: | 40X6640 |
| Деталь: | Belt lever lock |
| Парткод: | 40X6638 |
| Деталь: | Belt lock bracket |
| Парткод: | 40X6639 |
| Деталь: | PLATE SPRING |
| Парткод: | 40X6641 |
| Деталь: | Inner plate |
| Парткод: | 40X6637 |
| Деталь: | Docking screw |
| Парткод: | 40X6683 |
| Деталь: | Tray module top cover |
| Парткод: | 40X6688 |
| Деталь: | Tray module bottom cover |
| Парткод: | 40X6689 |
| Деталь: | Tray module left cover |
| Парткод: | 40X6690 |
| Деталь: | 1TM/TTM/3TM locking caster |
| Парткод: | 40X6685 |
| Деталь: | 1TM/TTM/3TM caster screw |
| Парткод: | 40X6583 |
| Деталь: | 1TM/TTM/3TM foot side cover |
| Парткод: | 40X6681 |
| Деталь: | 1TM/TTM/3TM adjuster foot |
| Парткод: | 40X6680 |
| Деталь: | 1TM/TTM/3TM non-locking caster |
| Парткод: | 40X6686 |
| Деталь: | 1TM/TTM/3TM foot rear cover |
| Парткод: | 40X6682 |
| Деталь: | Tray module rear cover |
| Парткод: | 40X6687 |
| Деталь: | Tray module right cover |
| Парткод: | 40X6691 |
| Деталь: | 1TM/TTM/3TM docking bracket |
| Парткод: | 40X6684 |
| Деталь: | ADF LED PCB |
| Парткод: | 40X6819 |
| Деталь: | HCF rear media guide kit |
| Парткод: | 40X0750 |
| Деталь: | HCF front media guide kit |
| Парткод: | 40X0751 |
| Деталь: | HCF separation pad |
| Парткод: | 40X0752 |
| Деталь: | HCF lift cable kit |
| Парткод: | 40X0757 |
| Деталь: | HCF media tray lift shaft kit |
| Парткод: | 40X0754 |
| Деталь: | HCF lift cable large pulley kit |
| Парткод: | 40X0756 |
| Деталь: | HCF media tray lift gear bracket |
| Парткод: | 40X0753 |
| Деталь: | Transfer belt cleaning assembly |
| Парткод: | 40X6623 |
| Деталь: | Transfer belt lever |
| Парткод: | 40X6622 |
| Деталь: | Transfer belt assembly |
| Парткод: | 40X6624 |
| Деталь: | Front transfer belt retaining bracket |
| Парткод: | 40X6620 |
| Деталь: | Rear transfer belt retaining bracket |
| Парткод: | 40X6621 |
| Деталь: | Finisher right lift carriage assembly |
| Парткод: | 40X4043 |
| Деталь: | Finisher left lift carriage assembly |
| Парткод: | 40X4040 |
| Деталь: | Sensor (stacker bin level F) |
| Парткод: | 40X7421 |
| Деталь: | Sensor (stacker bin level R) |
| Парткод: | 40X7421 |
| Деталь: | Stacker slip clutch pulley kit |
| Парткод: | 40X0849 |
| Деталь: | BEARING |
| Парткод: | 40X0852 |
| Деталь: | Sensor (stacker bin level encoder) |
| Парткод: | 40X0850 |
| Деталь: | Stacker bin lift motor |
| Парткод: | 40X7477 |
| Деталь: | Small platen rear retainer |
| Парткод: | 40X6711 |
| Деталь: | Small platen glass |
| Парткод: | 40X2214 |
| Деталь: | Small platen front retainer |
| Парткод: | 40X6727 |
| Деталь: | Large platen glass |
| Парткод: | 40X6577 |
| Деталь: | Large platen retainer |
| Парткод: | 40X6592 |
| Деталь: | Stepper motor |
| Парткод: | 40X0910 |
| Деталь: | Upper media transport roll drive pulley 20T |
| Парткод: | 40X0925 |
| Деталь: | BUSHING |
| Парткод: | 40X0888 |
| Деталь: | Upper pinch guide |
| Парткод: | 40X6900 |
| Деталь: | Sensor (diverter gate) |
| Парткод: | 40X0921 |
| Деталь: | Diverter gate sensor cable |
| Парткод: | 40X7480 |
| Деталь: | Upper transport roll |
| Парткод: | 40X6901 |
| Деталь: | Buffer roll drive pulley/gear 53/23T |
| Парткод: | 40X0924 |
| Деталь: | Belt (buffer/transport) 19.8 cm |
| Парткод: | 40X0928 |
| Деталь: | Belt (exit) 27.7 cm |
| Парткод: | 40X0929 |
| Деталь: | 1st transfer retract clutch assembly |
| Парткод: | 40X6584 |
| Деталь: | Registration drive motor |
| Парткод: | 40X6585 |
| Деталь: | A) Sensor (ADF document set) B) Sensor (ADF feed out) |
| Парткод: | 40X7403 |
| Деталь: | ADF document set solenoid |
| Парткод: | 40X7401 |
| Деталь: | ADF nip release lever |
| Парткод: | 40X7400 |
| Деталь: | SPRING |
| Парткод: | 40X6818 |
| Деталь: | ADF nip release link |
| Парткод: | 40X7402 |
| Деталь: | ADF nip release solenoid |
| Парткод: | 40X6817 |
| Деталь: | ADF diverter gate solenoid |
| Парткод: | 40X6816 |
| Деталь: | HCF top cover |
| Парткод: | 40X7394 |
| Деталь: | HCF docking bracket kit |
| Парткод: | 40X0745 |
| Деталь: | Mounting Screw |
| Парткод: | 40X2238 |
| Деталь: | HCF inner front cover |
| Парткод: | 40X7395 |
| Деталь: | HCF tray 5 feeder assembly |
| Парткод: | 40X7398 |
| Деталь: | HCF media tray assembly |
| Парткод: | 40X6789 |
| Деталь: | CASTER |
| Парткод: | 40X0741 |
| Деталь: | HCF left cover |
| Парткод: | 40X7396 |
| Деталь: | Senser (HCF media tray set) |
| Парткод: | 40X0739 |
| Деталь: | HCF rear cover |
| Парткод: | 40X7397 |
| Деталь: | Scanner interface cable |
| Парткод: | 40X7468 |
| Деталь: | 3TM 34T gear |
| Парткод: | 40X6668 |
| Деталь: | Tray module upper transport motor |
| Парткод: | 40X6674 |
| Деталь: | 3TM/TTM 39T gear |
| Парткод: | 40X6669 |
| Деталь: | Tray module lower transport motor |
| Парткод: | 40X6670 |
| Деталь: | 3TM interface cable |
| Парткод: | 40X6673 |
| Деталь: | 3TM motor cable |
| Парткод: | 40X6672 |
| Деталь: | 3TM sensor cable |
| Парткод: | 40X6671 |
| Деталь: | Tray module controller PCBA |
| Парткод: | 40X6667 |
| Деталь: | TTM upper transport motor |
| Парткод: | 40X6704 |
| Деталь: | TTM gear 52T |
| Парткод: | 40X7355 |
| Деталь: | TTM tension bracket |
| Парткод: | 40X7361 |
| Деталь: | TTM drive gear |
| Парткод: | 40X7357 |
| Деталь: | TTM drive belt |
| Парткод: | 40X7359 |
| Деталь: | TTM idler pulley |
| Парткод: | 40X7358 |
| Деталь: | TTM drive flange |
| Парткод: | 40X7356 |
| Деталь: | TTM lower transport motor |
| Парткод: | 40X6703 |
| Деталь: | SPRING |
| Парткод: | 40X7360 |
| Деталь: | TTM tray 4 drive gear |
| Парткод: | 40X7363 |
| Деталь: | Docking screw |
| Парткод: | 40X6683 |
| Деталь: | Tray module top cover |
| Парткод: | 40X6688 |
| Деталь: | Tray module bottom cover |
| Парткод: | 40X6689 |
| Деталь: | Tray module left cover |
| Парткод: | 40X6690 |
| Деталь: | 1TM/TTM/3TM locking caster |
| Парткод: | 40X6685 |
| Деталь: | 1TM/TTM/3TM caster screw |
| Парткод: | 40X6583 |
| Деталь: | 1TM/TTM/3TM foot side cover |
| Парткод: | 40X6681 |
| Деталь: | 1TM/TTM/3TM adjuster foot |
| Парткод: | 40X6680 |
| Деталь: | 1TM/TTM/3TM non-locking caster |
| Парткод: | 40X6686 |
| Деталь: | 1TM/TTM/3TM foot rear cover |
| Парткод: | 40X6682 |
| Деталь: | Tray module rear cover |
| Парткод: | 40X6687 |
| Деталь: | Tray module right cover |
| Парткод: | 40X6691 |
| Деталь: | 1TM/TTM/3TM docking bracket |
| Парткод: | 40X6684 |
| Деталь: | MAGNETIC CATCH |
| Парткод: | 40X7377 |
| Деталь: | Inner cover |
| Парткод: | 40X7381 |
| Деталь: | Printer front door support strap |
| Парткод: | 40X7378 |
| Деталь: | Printer front door |
| Парткод: | 40X7379 |
| Деталь: | Sensor (document tray length 2) |
| Парткод: | 40X3892 |
| Деталь: | Sensor (document tray length 1) |
| Парткод: | 40X3892 |
| Деталь: | Sensor (ADF document tray width 1) |
| Парткод: | 40X7403 |
| Деталь: | Sensor (ADF document tray width 2) |
| Парткод: | 40X7403 |
| Деталь: | Sensor (ADF document tray width 3) |
| Парткод: | 40X7403 |
| Деталь: | Printer tray 1 media feeder |
| Парткод: | 40X6656 |
| Деталь: | Printer media turn guide |
| Парткод: | 40X6657 |
| Деталь: | Sensor (ADF pre registration) |
| Парткод: | 40X7403 |
| Деталь: | Sensor (ADF scan width 2) |
| Парткод: | 40X7403 |
| Деталь: | Sensor (ADF scan width 3) |
| Парткод: | 40X7403 |
| Деталь: | Sensor (ADF scan width 1) |
| Парткод: | 40X7403 |
| Деталь: | Sensor (ADF registration) |
| Парткод: | 40X7403 |
| Деталь: | 1TM front cover |
| Парткод: | 40X7367 |
| Деталь: | HCF media tray front cover |
| Парткод: | 40X7399 |
| Деталь: | HCF media long-edge guide kit |
| Парткод: | 40X0749 |
| Деталь: | Sensor (tray module feed out) |
| Парткод: | 40X7334 |
| Деталь: | Sensor (TTM tray 3 feed out) |
| Парткод: | 40X3688 |
| Деталь: | TTM tray 3 feed-out actuator |
| Парткод: | 40X7336 |
| Деталь: | TTM actuator spring |
| Парткод: | 40X7337 |
| Деталь: | BEARING |
| Парткод: | 40X3915 |
| Деталь: | TTM tray 4 media turn guide |
| Парткод: | 40X7341 |
| Деталь: | TTM tray 3 feeder |
| Парткод: | 40X7340 |
| Деталь: | TTM tray 3 media turn guide |
| Парткод: | 40X6699 |
| Деталь: | 1TM/3TM/TTM media turn guide |
| Парткод: | 40X6663 |
| Деталь: | 3TM/TTM media feeder |
| Парткод: | 40X6662 |
| Деталь: | Tray module transport roller |
| Парткод: | 40X6677 |
| Деталь: | TTM tray 3 feed out sensor cable |
| Парткод: | 40X7338 |
| Деталь: | Fuser power contact 110V |
| Парткод: | 40X6736 |
| Деталь: | Fuser power contact 220V |
| Парткод: | 40X7376 |
| Деталь: | Fuser driver PCBA 110V |
| Парткод: | 40X6735 |
| Деталь: | Fuser driver PCBA 220V |
| Парткод: | 40X7375 |
| Деталь: | Sub LVPS PCBA |
| Парткод: | 40X6737 |
| Деталь: | Main power GFI interface 110V |
| Парткод: | 40X6734 |
| Деталь: | Main power GFI interface 220V |
| Парткод: | 40X7374 |
| Деталь: | Filter cover (MFP) |
| Парткод: | 40X6784 |
| Деталь: | Rear upper cover (MFP) |
| Парткод: | 40X6783 |
| Деталь: | Rear lower cover |
| Парткод: | 40X7535 |
| Деталь: | Input tray interface cover |
| Парткод: | 40X6785 |
| Деталь: | EPSV cover |
| Парткод: | 40X7387 |
| Деталь: | Controller box cover (MFP) |
| Парткод: | 40X6786 |
| Деталь: | Cable interface door |
| Парткод: | 40X6787 |
| Деталь: | Right rear cover (MFP) |
| Парткод: | 40X6782 |
| Деталь: | Printer right cover |
| Парткод: | 40X6781 |
| Деталь: | Motor cover |
| Парткод: | 40X6649 |
| Деталь: | Actuator gear |
| Парткод: | 40X6648 |
| Деталь: | Plastic bushing |
| Парткод: | 40X0880 |
| Деталь: | Waste toner agitator motor |
| Парткод: | 40X6643 |
| Деталь: | Waste toner gear 31T |
| Парткод: | 40X6646 |
| Деталь: | Waste toner gear 29T |
| Парткод: | 40X6645 |
| Деталь: | Waste toner shaft gate |
| Парткод: | 40X6647 |
| Деталь: | Waste toner bottle present sensor |
| Парткод: | 40X3820 |
| Деталь: | Waste toner sensor guide |
| Парткод: | 40X6650 |
| Деталь: | Waste toner auger chute |
| Парткод: | 40X6642 |
| Деталь: | Waste toner gear bracket |
| Парткод: | 40X6644 |
| Деталь: | Media bail |
| Парткод: | 40X6722 |
| Деталь: | Lower redrive guard |
| Парткод: | 40X6724 |
| Деталь: | Lower redrive front bushing |
| Парткод: | 40X6721 |
| Деталь: | Upper redrive assembly |
| Парткод: | 40X6723 |
| Деталь: | Plastic motor cover |
| Парткод: | 40X7373 |
| Деталь: | Lower redrive 19T gear |
| Парткод: | 40X6720 |
| Деталь: | Sensor (lower redrive shift HP) |
| Парткод: | 40X0588 |
| Деталь: | MPF tray feeder |
| Парткод: | 40X6707 |
| Деталь: | MPF top cover |
| Парткод: | 40X6708 |
| Деталь: | MPF media present actuator |
| Парткод: | 40X6709 |
| Деталь: | MPF roller kit includes: |
| Парткод: | 40X7534 |
| Деталь: | LVPS front fan guide |
| Парткод: | 40X6739 |
| Деталь: | LVPS PCBA |
| Парткод: | 40X6762 |
| Деталь: | Main power switch |
| Парткод: | 40X6738 |
| Деталь: | Sensor (printer right front door interlock) |
| Парткод: | 40X6710 |
| Деталь: | Sensor (Image calibration) |
| Парткод: | 40X6740 |
| Деталь: | Front door sensor |
| Парткод: | 40X6761 |
| Деталь: | GEAR 18T |
| Парткод: | 40X4008 |
| Деталь: | GEAR 16T |
| Парткод: | 40X4006 |
| Деталь: | Booklet folding roll drive gear 38/18T |
| Парткод: | 40X4007 |
| Деталь: | GEAR 16T |
| Парткод: | 40X7523 |
| Деталь: | GEAR 37T |
| Парткод: | 40X4010 |
| Деталь: | Gear pulley 20/25T |
| Парткод: | 40X4004 |
| Деталь: | Booklet exit roll drive belt |
| Парткод: | 40X4005 |
| Деталь: | Developer housing rear plunger |
| Парткод: | 40X7332 |
| Деталь: | ATC sensor PCB bracket |
| Парткод: | 40X6614 |
| Деталь: | ATC sensor PCB |
| Парткод: | 40X6613 |
| Деталь: | Developer housing |
| Парткод: | 40X6615 |
| Деталь: | K developer carrier |
| Парткод: | 40X6609 |
| Деталь: | C developer carrier |
| Парткод: | 40X6610 |
| Деталь: | Y developer carrier |
| Парткод: | 40X6612 |
| Деталь: | M developer carrier |
| Парткод: | 40X6611 |
| Деталь: | Developer bracket |
| Парткод: | 40X6608 |
| Деталь: | 2 |
| Парткод: | 40X3905 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X0862 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X7537 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X0859 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X7438 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X3943 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X6865 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X3937 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X7536 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X7422 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X0855 |
| Деталь: | Main PCB Assembly |
| Парткод: | 40X0854 |
| Деталь: | Fuser assembly 100V |
| Парткод: | 40X7532 |
| Деталь: | Fuser assembly 110V |
| Парткод: | 40X6629 |
| Деталь: | Fuser assembly 220V |
| Парткод: | 40X6630 |
| Деталь: | Fuser pressure roll retract gear |
| Парткод: | 40X6632 |
| Деталь: | Fuser pressure roll retract motor |
| Парткод: | 40X6631 |
| Деталь: | Booklet front tamper guide |
| Парткод: | 40X7433 |
| Деталь: | a) Sensor (booklet front tamper HP) b) Sensor (booklet rear tamper HP) |
| Парткод: | 40X0825 |
| Деталь: | Booklet rear tamper motor |
| Парткод: | 40X7492 |
| Деталь: | Booklet front tamper motor |
| Парткод: | 40X7492 |
| Деталь: | Booklet rear tamper guide |
| Парткод: | 40X7434 |
| Деталь: | 1TM left door |
| Парткод: | 40X7371 |
| Деталь: | HCF transport motor |
| Парткод: | 40X0776 |
| Деталь: | Sensor (HCF unit docking interlock) |
| Парткод: | 40X0777 |
| Деталь: | HCF rack gear |
| Парткод: | 40X6792 |
| Деталь: | HCF sliding damper |
| Парткод: | 40X6793 |
| Деталь: | HCF caster |
| Парткод: | 40X0741 |
| Деталь: | HCF main cable |
| Парткод: | 40X0779 |
| Деталь: | HCF controller card PCBA |
| Парткод: | 40X6791 |
| Деталь: | Fuser cooling fan |
| Парткод: | 40X6588 |
| Деталь: | Fuser fan duct |
| Парткод: | 40X6590 |
| Деталь: | Fuser driver PCBA cooling fan |
| Парткод: | 40X6591 |
| Деталь: | LVPS sub cooling fan |
| Парткод: | 40X6589 |
| Деталь: | LVPS sub cooling duct |
| Парткод: | 40X6770 |
| Деталь: | Media tray right roller |
| Парткод: | 40X6653 |
| Деталь: | Printer media tray 1 |
| Парткод: | 40X6654 |
| Деталь: | Media tray compartment cover |
| Парткод: | 40X6655 |
| Деталь: | Media tray left roller |
| Парткод: | 40X6652 |
| Деталь: | Media tray stop |
| Парткод: | 40X6651 |
| Деталь: | Media size switch PCB |
| Парткод: | 40X7533 |
| Деталь: | Docking screw |
| Парткод: | 40X6683 |
| Деталь: | Tray module top cover |
| Парткод: | 40X6688 |
| Деталь: | Tray module left cover |
| Парткод: | 40X6690 |
| Деталь: | 1TM/TTM/3TM locking caster |
| Парткод: | 40X6685 |
| Деталь: | 1TM/TTM/3TM caster screw |
| Парткод: | 40X6583 |
| Деталь: | 1TM/TTM/3TM foot side cover |
| Парткод: | 40X6681 |
| Деталь: | 1TM/TTM/3TM non-locking caster |
| Парткод: | 40X6686 |
| Деталь: | 1TM/TTM/3TM adjuster foot |
| Парткод: | 40X6680 |
| Деталь: | 1TM/TTM/3TM foot rear cover |
| Парткод: | 40X6682 |
| Деталь: | Tray module rear cover |
| Парткод: | 40X6687 |
| Деталь: | Tray module right cover |
| Парткод: | 40X6691 |
| Деталь: | 1TM/TTM/3TM docking bracket |
| Парткод: | 40X6684 |
| Деталь: | Finisher front door assembly |
| Парткод: | 40X7415 |
| Деталь: | Upper media bin front cover |
| Парткод: | 40X7414 |
| Деталь: | Sensor (finisher front door interlock) |
| Парткод: | 40X0840 |
| Деталь: | SPRING |
| Парткод: | 40X7470 |
| Деталь: | Finisher dock plate |
| Парткод: | 40X3932 |
| Деталь: | Finisher grounding plate |
| Парткод: | 40X7475 |
| Деталь: | Finisher docking bracket |
| Парткод: | 40X7474 |
| Деталь: | Static eliminator brush |
| Парткод: | 40X0894 |
| Деталь: | Lower media exit roll |
| Парткод: | 40X0895 |
| Деталь: | BUSHING |
| Парткод: | 40X0888 |
| Деталь: | Main paddle drive pulley/gear 44/20T |
| Парткод: | 40X0900 |
| Деталь: | Gear (23T) |
| Парткод: | 40X3959 |
| Деталь: | Lower exit roll drive pulley kit |
| Парткод: | 40X0898 |
| Деталь: | Gear (23T) |
| Парткод: | 40X4066 |
| Деталь: | Ball bearing 6mm |
| Парткод: | 40X0913 |
| Деталь: | Idler pulley |
| Парткод: | 40X4128 |
| Деталь: | Main paddle shaft drive pulley 17T |
| Парткод: | 40X4106 |
| Деталь: | Main paddle shaft |
| Парткод: | 40X6887 |
| Деталь: | Lower exit pinch roll |
| Парткод: | 40X6890 |
| Деталь: | Lower exit sensor cable |
| Парткод: | 40X7427 |
| Деталь: | Sensor (lower media exit) |
| Парткод: | 40X0893 |
| Деталь: | Developer HVPS PCBA |
| Парткод: | 40X6619 |
| Деталь: | Upper media exit pinch roll |
| Парткод: | 40X0918 |
| Деталь: | Bridge unit top door spring |
| Парткод: | 40X6839 |
| Деталь: | ADF sensor actuator guide |
| Парткод: | 40X6822 |
| Деталь: | ADF separation roller guide |
| Парткод: | 40X6821 |
| Деталь: | ADF registration turn guide |
| Парткод: | 40X6820 |
| Деталь: | Printhead interface contact |
| Парткод: | 40X6569 |
| Деталь: | Printhead flat data cable |
| Парткод: | 40X6568 |
| Деталь: | Belt idler pulley |
| Парткод: | 40X4128 |
| Деталь: | Bridge tension bracket |
| Парткод: | 40X6844 |
| Деталь: | Recoil spring |
| Парткод: | 40X6845 |
| Деталь: | Bridge idler pulley |
| Парткод: | 40X6840 |
| Деталь: | Retainer |
| Парткод: | 40X3963 |
| Деталь: | TORQUE LIMITER |
| Парткод: | 40X3962 |
| Деталь: | Bridge drive pulley |
| Парткод: | 40X6841 |
| Деталь: | Bridge large drive belt |
| Парткод: | 40X7408 |
| Деталь: | Bridge drive pulley |
| Парткод: | 40X6842 |
| Деталь: | BUSHING |
| Парткод: | 40X7406 |
| Деталь: | Plastic bushing |
| Парткод: | 40X0880 |
| Деталь: | Power switch cover |
| Парткод: | 40X7409 |
| Деталь: | Sensor (bridge media entrance) |
| Парткод: | 40X6843 |
| Деталь: | MAGNETIC CATCH |
| Парткод: | 40X0824 |
| Деталь: | TTM left door |
| Парткод: | 40X6702 |
| Деталь: | Tray module left door sensor cable |
| Парткод: | 40X6701 |
| Деталь: | Sensor (tray module left door interlock) |
| Парткод: | 40X6700 |
| Деталь: | TTM tray 4 media feeder |
| Парткод: | 40X6696 |
| Деталь: | TTM tray 4 feeder lower guide |
| Парткод: | 40X6834 |
| Деталь: | Sensor (TTM tray 4 feedout) |
| Парткод: | 40X0727 |
| Деталь: | TTM tray 4 feeder upper guide |
| Парткод: | 40X6871 |
| Деталь: | TTM tray 4 feeder sensor cable |
| Парткод: | 40X6883 |
| Деталь: | TTM tray 4 feeder motor cable |
| Парткод: | 40X6896 |
| Деталь: | TTM tray 4 media transport |
| Парткод: | 40X6697 |
| Деталь: | Booklet media pinch roll assembly |
| Парткод: | 40X7565 |
| Деталь: | Booklet front pulley |
| Парткод: | 40X7436 |
| Деталь: | Gear (16T) |
| Парткод: | 40X7523 |
| Деталь: | Booklet entrance drive pulley |
| Парткод: | 40X7435 |
| Деталь: | Booklet media exit pinch roller |
| Парткод: | 40X4011 |
| Деталь: | Media exit sensor cable assembly |
| Парткод: | 40X7494 |
| Деталь: | a) Sensor (booklet media entrance) b) Sensor (booklet media exit) |
| Парткод: | 40X0921 |
| Деталь: | Media eject unit frame |
| Парткод: | 40X7424 |
| Деталь: | MAGNETIC CATCH |
| Парткод: | 40X0824 |
| Деталь: | Eject cover interlock switch |
| Парткод: | 40X0882 |
| Деталь: | KNOB |
| Парткод: | 40X7746 |
| Деталь: | BUSHING |
| Парткод: | 40X0888 |
| Деталь: | Gear 23T |
| Парткод: | 40X6868 |
| Деталь: | Eject clamp lever assembly |
| Парткод: | 40X0877 |
| Деталь: | Cam pulley |
| Парткод: | 40X6869 |
| Деталь: | DRIVE PULLEY |
| Парткод: | 40X6870 |
| Деталь: | Paddle shaft |
| Парткод: | 40X7362 |
| Деталь: | Clamp drive belt |
| Парткод: | 40X7425 |
| Деталь: | Clamp drive motor |
| Парткод: | 40X7426 |
| Деталь: | SPRING |
| Парткод: | 40X4147 |
| Деталь: | Sub paddle |
| Парткод: | 40X0874 |
| Деталь: | Sub paddle solenoid |
| Парткод: | 40X4120 |
| Деталь: | Booklet stapler unit assembly |
| Парткод: | 40X7486 |
| Деталь: | PULLEY |
| Парткод: | 40X7488 |
| Деталь: | Booklet knob |
| Парткод: | 40X7485 |
| Деталь: | Belt flange |
| Парткод: | 40X7484 |
| Деталь: | Booklet front drive belt |
| Парткод: | 40X7432 |
| Деталь: | Booklet gear 31T |
| Парткод: | 40X6916 |
| Деталь: | Mirror retainer clip |
| Парткод: | 40X6561 |
| Деталь: | Number 2/3 mirror |
| Парткод: | 40X2232 |
| Деталь: | LED exposure bar |
| Парткод: | 40X6563 |
| Деталь: | Exposure lamp flat cable |
| Парткод: | 40X6562 |
| Деталь: | Number 1 mirror |
| Парткод: | 40X2234 |
| Деталь: | Sensor (FB platen length) assembly |
| Парткод: | 40X6555 |
| Деталь: | FB CCD sensor assembly |
| Парткод: | 40X6556 |
| Деталь: | Sensor (ADF closed interlock) |
| Парткод: | 40X6768 |
| Деталь: | Rear scanner ribbon cable |
| Парткод: | 40X6557 |
| Деталь: | ADF angle actuator |
| Парткод: | 40X6558 |
| Деталь: | Sensor (ADF angle) |
| Парткод: | 40X2223 |
| Деталь: | Authentication PCBA |
| Парткод: | 40X6564 |
| Деталь: | Front scanner ribbon cable |
| Парткод: | 40X7531 |
| Деталь: | Bridge decurler cam |
| Парткод: | 40X6847 |
| Деталь: | Bridge decurler cam clutch |
| Парткод: | 40X6848 |
| Деталь: | Sensor flag |
| Парткод: | 40X3917 |
| Деталь: | A) Sensor (decurler cam HP) B) Sensor (decurler cover interlock) |
| Парткод: | 40X0825 |
| Деталь: | BEARING |
| Парткод: | 40X1388 |
| Деталь: | Bridge one way gear |
| Парткод: | 40X6111 |
| Деталь: | Bridge gear 18T |
| Парткод: | 40X6850 |
| Деталь: | Bridge gear 16T |
| Парткод: | 40X6851 |
| Деталь: | Bridge knob gear 18T |
| Парткод: | 40X6849 |
| Деталь: | TTM gear 17T/50T |
| Парткод: | 40X7350 |
| Деталь: | TTM gear 16T/48T |
| Парткод: | 40X7351 |
| Деталь: | TTM gear 57T |
| Парткод: | 40X7352 |
| Деталь: | Media size switch PCB |
| Парткод: | 40X7533 |
| Деталь: | Sensor (TTM media size) |
| Парткод: | 40X7349 |
| Деталь: | COUPLER |
| Парткод: | 40X7353 |
| Деталь: | TTM gear 51T |
| Парткод: | 40X7354 |
| Деталь: | Left upper exit nip roll |
| Парткод: | 40X6893 |
| Деталь: | Right upper exit nip roll |
| Парткод: | 40X6894 |
| Деталь: | Sensor (upper media exit) |
| Парткод: | 40X0893 |
| Деталь: | Upper exit sensor cable |
| Парткод: | 40X6892 |
| Деталь: | Upper media transport roll drive pulley/gear 20/20T |
| Парткод: | 40X0926 |
| Деталь: | Upper media exit roll drive gear 20T |
| Парткод: | 40X0927 |
| Деталь: | Finisher upper bin vertical cover |
| Парткод: | 40X7429 |
| Деталь: | Sensor (upper media bin full) |
| Парткод: | 40X0908 |
| Деталь: | Upper bin full sensor cable |
| Парткод: | 40X7428 |
| Деталь: | Upper media exit roll |
| Парткод: | 40X6891 |
| Деталь: | Media transport/MPF drive motor |
| Парткод: | 40X6716 |
| Деталь: | Transport 29T gear |
| Парткод: | 40X6718 |
| Деталь: | Rear bushing |
| Парткод: | 40X6717 |
| Деталь: | Transport 60T gear |
| Парткод: | 40X6719 |
| Деталь: | Registration 40T gear |
| Парткод: | 40X6713 |
| Деталь: | Front bushing |
| Парткод: | 40X6714 |
| Деталь: | Registration/transport roller assembly |
| Парткод: | 40X6715 |
| Деталь: | Automatic document feeder assembly |
| Парткод: | 40X6795 |
| Деталь: | ADF platen pad |
| Парткод: | 40X6794 |
| Деталь: | Flatbed scanner assembly |
| Парткод: | 40X6554 |
| Деталь: | Scanner top cover |
| Парткод: | 40X6551 |
| Деталь: | Scanner right cover |
| Парткод: | 40X6550 |
| Деталь: | Scanner blind cover |
| Парткод: | 40X6553 |
| Деталь: | Scanner left cover |
| Парткод: | 40X6092 |
| Деталь: | Flatbed scanner assembly |
| Парткод: | 40X6554 |
| Деталь: | Scanner rear cover |
| Парткод: | 40X6552 |
| Деталь: | Rubber screw caps |
| Парткод: | 40X7461 |
| Деталь: | Base wiring top cable |
| Парткод: | 40X6766 |
| Деталь: | Base left wiring cable |
| Парткод: | 40X6764 |
| Деталь: | Base right wiring cable |
| Парткод: | 40X6765 |
| Деталь: | Base wiring bottom cable |
| Парткод: | 40X6767 |
| Деталь: | Front transfer belt guide |
| Парткод: | 40X6625 |
| Деталь: | Rear transfer belt guide |
| Парткод: | 40X6627 |
| Деталь: | Belt removal actuator |
| Парткод: | 40X6626 |
| Деталь: | 1st transfer conductor housing |
| Парткод: | 40X7333 |
| Деталь: | Transfer roll HVPS PCBA |
| Парткод: | 40X6628 |
| Деталь: | Finisher top cover |
| Парткод: | 40X6862 |
| Деталь: | Upper media bin |
| Парткод: | 40X7476 |
| Деталь: | Right eject cover |
| Парткод: | 40X7416 |
| Деталь: | Stacker media bin |
| Парткод: | 40X7465 |
| Деталь: | Finisher bottom cover |
| Парткод: | 40X7417 |
| Деталь: | Adjustable caster |
| Парткод: | 40X4405 |
| Деталь: | Non-adjusting caster |
| Парткод: | 40X6664 |
| Деталь: | Finisher rear lower cover |
| Парткод: | 40X7418 |
| Деталь: | Connector Cover |
| Парткод: | 40X7405 |
| Деталь: | Finisher rear upper cover |
| Парткод: | 40X6864 |
| Деталь: | Finisher left upper cover |
| Парткод: | 40X7420 |
| Деталь: | Tray module media tray |
| Парткод: | 40X6665 |
| Деталь: | TTM tray 4 media tray |
| Парткод: | 40X6698 |
| Деталь: | TTM tray 4 media tray cover |
| Парткод: | 40X6693 |
| Деталь: | TTM tray 3 media tray |
| Парткод: | 40X6694 |
| Деталь: | TTM tray 3 media tray cover |
| Парткод: | 40X6695 |
| Деталь: | TTM tray spacer |
| Парткод: | 40X7342 |
| Деталь: | TTM tray side roller |
| Парткод: | 40X7344 |
| Деталь: | TTM tray 4 lock |
| Парткод: | 40X7347 |
| Деталь: | TTM tray 3/4 tray roller |
| Парткод: | 40X7343 |
| Деталь: | TTM tray 3/4 stopper |
| Парткод: | 40X7348 |
| Деталь: | TTM tray 3 lock |
| Парткод: | 40X7346 |
| Деталь: | TTM upper stopper |
| Парткод: | 40X7345 |
| Деталь: | Front upper cooling fan |
| Парткод: | 40X6593 |
| Деталь: | Front right cooling fan |
| Парткод: | 40X6595 |
| Деталь: | Front left cooling fan |
| Парткод: | 40X6594 |
| Деталь: | Complete stapler |
| Парткод: | 40X7561 |
| Деталь: | Stapler harness |
| Парткод: | 40X6867 |
| Деталь: | Stapler carriage |
| Парткод: | 40X4050 |
| Деталь: | Stapler transport motor |
| Парткод: | 40X7339 |
| Деталь: | Stapler carriage rack gear |
| Парткод: | 40X0872 |
| Деталь: | Stapler unit cover |
| Парткод: | 40X7423 |
| Деталь: | Staple cartridge |
| Парткод: | 40X0866 |
| Деталь: | Stapler unit assembly |
| Парткод: | 40X0867 |
| Деталь: | ADF scan pad |
| Парткод: | 40X6804 |
| Деталь: | ADF left hinge |
| Парткод: | 40X6802 |
| Деталь: | ADF right hinge |
| Парткод: | 40X6803 |
| Деталь: | Suction filter |
| Парткод: | 40X6599 |
| Деталь: | PC/developer drive motor cooling fan |
| Парткод: | 40X6596 |
| Деталь: | Rear center duct |
| Парткод: | 40X6771 |
| Деталь: | Charge roll HVPS cooling fan |
| Парткод: | 40X6597 |
| Деталь: | Upper exhaust fan |
| Парткод: | 40X6598 |
| Деталь: | Center exhaust fan |
| Парткод: | 40X6600 |
| Деталь: | ADF REAR COVER |
| Парткод: | 40X6797 |
| Деталь: | ADF interface cable |
| Парткод: | 40X6799 |
| Деталь: | ADF controller PCBA |
| Парткод: | 40X6800 |
| Деталь: | ADF media stop |
| Парткод: | 40X6801 |
| Деталь: | ADF FRONT COVER |
| Парткод: | 40X6798 |
| Деталь: | ADF main drive sub assembly |
| Парткод: | 40X6796 |
| Деталь: | Sensor (FB scanner HP) |
| Парткод: | 40X6560 |
| Деталь: | SPRING |
| Парткод: | 40X6559 |
| Деталь: | Scanner carriage motor |
| Парткод: | 40X3868 |
| Деталь: | Scanner drive belt |
| Парткод: | 40X2226 |
| Деталь: | Media size switch PCB |
| Парткод: | 40X7533 |
| Деталь: | Tray module media tray |
| Парткод: | 40X6665 |
| Деталь: | Tray module media feeder |
| Парткод: | 40X6662 |
| Деталь: | Tray module tray 2 media turn guide |
| Парткод: | 40X6663 |
| Деталь: | HCF top door |
| Парткод: | 40X7471 |
| Деталь: | HCF top door rear spring |
| Парткод: | 40X7440 |
| Деталь: | HCF top door front spring |
| Парткод: | 40X7450 |
| Деталь: | Sensor (HCF top door interlock) |
| Парткод: | 40X0553 |
| Деталь: | Sensor (tray 5 feed out) |
| Парткод: | 40X0774 |
| Деталь: | HCF media transport roller kit |
| Парткод: | 40X0775 |
| Деталь: | Sensor (HCF unit docking interlock) |
| Парткод: | 40X0777 |
| Деталь: | HCF transport motor |
| Парткод: | 40X0776 |
| Деталь: | Operator panel right cover (MFP) |
| Парткод: | 40X6989 |
| Деталь: | X950 model bezel |
| Парткод: | 40X6985 |
| Деталь: | X952 model bezel |
| Парткод: | 40X7900 |
| Деталь: | X954 model bezel |
| Парткод: | 40X7064 |
| Деталь: | Operator panel front cover (MFP) |
| Парткод: | 40X6987 |
| Деталь: | Operator panel front cover with slot (MFP) |
| Парткод: | 40X7458 |
| Деталь: | Operator panel left cover (MFP) |
| Парткод: | 40X6988 |
| Деталь: | Operator panel (MFP) |
| Парткод: | 40X6986 |
| Деталь: | Sensor (booklet end guide HP) |
| Парткод: | 40X0825 |
| Деталь: | Booklet end guide drive motor |
| Парткод: | 40X7489 |
| Деталь: | Gear pulley 40/20T |
| Парткод: | 40X3993 |
| Деталь: | Booklet end guide drive belt |
| Парткод: | 40X3994 |
| Деталь: | Booklet paddle roll |
| Парткод: | 40X6917 |
| Деталь: | Booklet paddle drive motor assembly |
| Парткод: | 40X7490 |
| Деталь: | Printhead rear block |
| Парткод: | 40X6565 |
| Деталь: | LED printhead |
| Парткод: | 40X6566 |
| Деталь: | Printhead retract door |
| Парткод: | 40X6567 |
| Деталь: | Booklet knife HP sensor cable assembly |
| Парткод: | 40X7491 |
| Деталь: | A) Sensor (booklet knife folding) B) Sensor (booklet knife HP) |
| Парткод: | 40X0825 |
| Деталь: | Booklet knife sector drive gear 42T |
| Парткод: | 40X3999 |
| Деталь: | Sensor (booklet media entrance) |
| Парткод: | 40X0921 |
| Деталь: | TTM interface cable |
| Парткод: | 40X7366 |
| Деталь: | TTM sensor cable |
| Парткод: | 40X7364 |
| Деталь: | TTM motor cable |
| Парткод: | 40X7365 |
| Деталь: | 1TM/3TM/TTM controller PCBA |
| Парткод: | 40X6667 |
| Деталь: | Booklet output tray |
| Парткод: | 40X6910 |
| Деталь: | Booklet right glide |
| Парткод: | 40X7482 |
| Деталь: | Booklet unit chassis |
| Парткод: | 40X6915 |
| Деталь: | Booklet left glide |
| Парткод: | 40X7483 |
| Деталь: | Booklet unit catch |
| Парткод: | 40X3988 |
| Деталь: | Booklet unit cable |
| Парткод: | 40X6913 |
| Деталь: | Booklet diverter cable |
| Парткод: | 40X6912 |
| Деталь: | Booklet controller power cable |
| Парткод: | 40X6911 |
| Деталь: | Booklet unit interface contact |
| Парткод: | 40X6914 |
| Деталь: | Booklet controller card assembly |
| Парткод: | 40X7481 |
| Деталь: | Booklet bin hookup cable assembly |
| Парткод: | 40X3987 |
| Деталь: | Separation limiter clutch |
| Парткод: | 40X6660 |
| Деталь: | Separation spacer |
| Парткод: | 40X6661 |
| Деталь: | Pick roller kit |
| Парткод: | 40X6805 |
| Деталь: | Lower pinch guide roller |
| Парткод: | 40X7538 |
| Деталь: | Buffer diverter gate |
| Парткод: | 40X4149 |
| Деталь: | Sensor (buffer path) |
| Парткод: | 40X0893 |
| Деталь: | Buffer path sensor cable |
| Парткод: | 40X7430 |
| Деталь: | Buffer roll |
| Парткод: | 40X0905 |
| Деталь: | Buffer pinch guide assembly |
| Парткод: | 40X6875 |
| Деталь: | Finisher media entrance roll |
| Парткод: | 40X0909 |
| Деталь: | Finisher entrance sensor cable |
| Парткод: | 40X7478 |
| Деталь: | Sensor (finisher media entrance) |
| Парткод: | 40X0908 |
| Деталь: | Media entrance pinch guide |
| Парткод: | 40X6895 |
| Деталь: | Stepper motor |
| Парткод: | 40X0910 |
| Деталь: | Belt idler pulley |
| Парткод: | 40X0912 |
| Деталь: | BUSHING |
| Парткод: | 40X0888 |
| Деталь: | Belt entrance/paddle 31.6 cm |
| Парткод: | 40X0911 |
| Деталь: | Diverter solenoid |
| Парткод: | 40X6897 |
| Деталь: | Media entrance roll drive pulley 20T |
| Парткод: | 40X0914 |
| Деталь: | Ball bearing 6 mm |
| Парткод: | 40X0913 |
| Деталь: | Buffer roll drive gear 46T |
| Парткод: | 40X0915 |
| Деталь: | Diverter solenoid link |
| Парткод: | 40X4083 |
| Деталь: | Finisher diverter gate |
| Парткод: | 40X7522 |
| Деталь: | Buffer solenoid link |
| Парткод: | 40X4070 |
| Деталь: | Buffer solenoid |
| Парткод: | 40X6898 |
| Деталь: | Bridge unit |
| Парткод: | 40X6826 |
| Деталь: | Bridge top door assembly |
| Парткод: | 40X6838 |
| Деталь: | Bridge decurler top cover |
| Парткод: | 40X6836 |
| Деталь: | Bridge decurler rear cover |
| Парткод: | 40X6833 |
| Деталь: | Connector Cover |
| Парткод: | 40X7405 |
| Деталь: | Bridge unit small belt |
| Парткод: | 40X6830 |
| Деталь: | Bridge decurler right cover |
| Парткод: | 40X6835 |
| Деталь: | Bridge interface cable |
| Парткод: | 40X6837 |
| Деталь: | Bridge media exit transport |
| Парткод: | 40X6829 |
| Деталь: | Clutch knob |
| Парткод: | 40X6827 |
| Деталь: | Bridge front cover |
| Парткод: | 40X6831 |
| Деталь: | Bridge unit base assembly |
| Парткод: | 40X7404 |
| Деталь: | Bridge entry guide |
| Парткод: | 40X6828 |
| Деталь: | Bridge rear cover |
| Парткод: | 40X6832 |
| Деталь: | Fuser drive/lower redrive/1st BTR retract motor |
| Парткод: | 40X6574 |
| Деталь: | Gear 40T/23T & belt |
| Парткод: | 40X6575 |
| Деталь: | Fuser drive release link |
| Парткод: | 40X6572 |
| Деталь: | Fuser release link spring |
| Парткод: | 40X6573 |
| Деталь: | Fuser drive release bracket |
| Парткод: | 40X6570 |
| Деталь: | SPRING |
| Парткод: | 40X6571 |
| Деталь: | Printer left duplex door assembly |
| Парткод: | 40X7372 |
| Деталь: | Sensor (printer left duplex door interlock) |
| Парткод: | 40X6710 |
| Деталь: | ADF document tray |
| Парткод: | 40X6806 |
| Деталь: | ADF left door retainer |
| Парткод: | 40X6808 |
| Деталь: | ADF top door |
| Парткод: | 40X6807 |
| Деталь: | 3TM left door |
| Парткод: | 40X6678 |
| Деталь: | Tray module left door sensor cable |
| Парткод: | 40X6701 |
| Деталь: | Sensor (tray module left door interlock) |
| Парткод: | 40X6700 |
| Деталь: | Operator panel top cover (MFP) |
| Парткод: | 40X6999 |
| Деталь: | MFP Operator panel PCBA |
| Парткод: | 40X6973 |
| Деталь: | MFP touch screen PCBA |
| Парткод: | 40X6307 |
| Деталь: | Booklet diverter gate |
| Парткод: | 40X7479 |
| Деталь: | Booklet path roll |
| Парткод: | 40X6899 |
| Деталь: | Booklet pinch guide |
| Парткод: | 40X7519 |
| Деталь: | Finisher motor cable |
| Парткод: | 40X6906 |
| Деталь: | Punch drive motor |
| Парткод: | 40X6907 |
| Деталь: | Interlock cable |
| Парткод: | 40X6909 |
| Деталь: | Punch sensor cable |
| Парткод: | 40X6908 |
| Деталь: | Finisher sensor cable |
| Парткод: | 40X6905 |
| Деталь: | Media feed lift motor |
| Парткод: | 40X6658 |
| Деталь: | Tray 1 media level sensor |
| Парткод: | 40X0588 |
| Деталь: | Tray 1 media out sensor |
| Парткод: | 40X0588 |
| Деталь: | Tray 2 media level sensor |
| Парткод: | 40X0588 |
| Деталь: | Tray 2 media out sensor |
| Парткод: | 40X0588 |
| Деталь: | Tray 3 media level sensor |
| Парткод: | 40X0588 |
| Деталь: | Tray 3 media out sensor |
| Парткод: | 40X0588 |
| Деталь: | Tray 4 media level sensor |
| Парткод: | 40X0588 |
| Деталь: | Tray 4 media out sensor |
| Парткод: | 40X0588 |
| Деталь: | Media out actuator |
| Парткод: | 40X0587 |
| Деталь: | Tray 1 pre-feed sensor |
| Парткод: | 40X0589 |
| Деталь: | Feeder slide guide |
| Парткод: | 40X6659 |
| Деталь: | Feeder unit slide rail |
| Парткод: | 40X6773 |
| Деталь: | 3TM 34T gear |
| Парткод: | 40X6668 |
| Деталь: | Tray module upper transport motor |
| Парткод: | 40X6674 |
| Деталь: | 1TM interface cable |
| Парткод: | 40X7370 |
| Деталь: | 1TM motor cable |
| Парткод: | 40X7369 |
| Деталь: | 1TTM sensor cable |
| Парткод: | 40X7368 |
| Деталь: | 1TM/3TM/TTM controller PCBA |
| Парткод: | 40X6667 |
| Деталь: | Charge roll HVPS PCBA |
| Парткод: | 40X6763 |
| Деталь: | Bridge PCBA |
| Парткод: | 40X3969 |
| Деталь: | Bridge unit connect cable assembly |
| Парткод: | 40X3970 |
| Деталь: | Bridge interface card cable |
| Парткод: | 40X0933 |
| Деталь: | Finisher controller PCBA |
| Парткод: | 40X6902 |
| Деталь: | Finisher interface cable |
| Парткод: | 40X4412 |
| Деталь: | Finisher AC filter PCBA |
| Парткод: | 40X6904 |
| Деталь: | Finisher power cable |
| Парткод: | 40X6903 |
| Деталь: | Finisher LVPS PCBA |
| Парткод: | 40X7521 |
| Деталь: | Finisher LVPS cable |
| Парткод: | 40X7431 |
| Деталь: | HCF feed unit latch kit |
| Парткод: | 40X0764 |
| Деталь: | HCF pick roller idler gear |
| Парткод: | 40X0765 |
| Деталь: | Sensor (tray 5 media out) |
| Парткод: | 40X0768 |
| Деталь: | Sensor (tray 5 media level) |
| Парткод: | 40X0768 |
| Деталь: | HCF media out actuator |
| Парткод: | 40X0767 |
| Деталь: | HCF feed unit roller kit |
| Парткод: | 40X0770 |
| Деталь: | HCF pick roller shaft kit |
| Парткод: | 40X0769 |
| Деталь: | HCF feed unit cable assembly |
| Парткод: | 40X0766 |
| Деталь: | Media compiler guide |
| Парткод: | 40X6886 |
| Деталь: | Eject shaft paddle |
| Парткод: | 40X6881 |
| Деталь: | Eject shaft roll |
| Парткод: | 40X6880 |
| Деталь: | BEARING |
| Парткод: | 40X1388 |
| Деталь: | BUSHING |
| Парткод: | 40X0888 |
| Деталь: | Media eject gear |
| Парткод: | 40X0889 |
| Деталь: | Media eject clamp clutch |
| Парткод: | 40X4062 |
| Деталь: | Eject shaft actuator |
| Парткод: | 40X6884 |
| Деталь: | Sensor (media eject shaft HP) |
| Парткод: | 40X0825 |
| Деталь: | Sensor (media eject clamp HP) |
| Парткод: | 40X0825 |
| Деталь: | Eject shaft roll motor |
| Парткод: | 40X6885 |
| Деталь: | Smart card cover (MFP) |
| Парткод: | 40X7099 |
| Деталь: | SPEAKER HOLDER |
| Парткод: | 40X7463 |
| Деталь: | Operator panel speaker |
| Парткод: | 40X6993 |
| Деталь: | Smart card housing (MFP) |
| Парткод: | 40X7098 |
| Деталь: | Operator panel housing (MFP) |
| Парткод: | 40X7097 |
| Деталь: | Card reader assembly (3121 contact) |
| Парткод: | 40X4602 |
| Деталь: | Card reader assembly (5121 contact/RFID) |
| Парткод: | 40X4603 |
| Деталь: | Card reader assembly (5125 contact/HID) |
| Парткод: | 40X4604 |
| Деталь: | MFP operator panel cable kit |
| Парткод: | 40X7331 |
Коды ошибок
111.01
111.02 ... 111.04
112.01
112.02 ... 112.04
113.01
113.02 ... 113.04
114.01
114.02 ... 114.04
115.01
115.02
115.03
115.04
115.05
115.06
115.07
115.08
115.09
115.10
115.11
115.12
115.13
115.14
115.15
120.01
120.02
121.01
121.03
121.04
121.05
121.06
121.07
121.08
121.09
121.10
121.11
121.12
121.13
126.01
126.02
126.03
126.04
126.05
126.06
126.07
126.08
126.09
126.12
132.01
132.03
132.04
137.01
140.01
141.01
141.02
151.01
151.02
154.01
155.01
156.01
157.01
158.01
171.01
171.02
172.01
173.01
174.01
175.01
175.03
175.04
175.05
175.06
175.07
175.08
191.01
191.02 ... 191.05
191.06
191.08
191.09
191.10
191.11
191.12
191.13
191.14
191.15
191.16
191.17
191.18
191.19
191.20
191.23
191.24
191.25
201
202
230
231
24x
250
281
28y.xx
31.xx
32.xx
34
35
36
37
38
39
455
4yy.xx
50
51
52
53
54
55
56
58
61
62
63
80
80.xx
82.xx
84
841.00
842.00
842.01
842.02
842.03
842.04
842.10
842.11
842.12
843.00
843.05
843.10
843.11
843.20
843.21
843.22
843.24
843.25
843.26
844.00
844.01
845.00
845.01
845.02
846.00
846.01
846.10
846.12
846.13
849.00
84.xx
900.58
910.02 ... 910.07
939.00
940.02
940.03
940.04
951.xx
953.xx
955.xx
956.00
956.01
956.02
956.03
957.01
957.02
980.04
980.05
995.00
996.00
997.00
999.00
Описание
| Error code: | 111.01 |
| Description: | Service printhead error LED printhead (K) failure Open circuit detected in the LED printhead. |
| Remedy: | 1 Check the LED Printhead (K) for proper installation. Is the LED Printhead (K) properly installed? Go to step 2. Install the LED Printhead (K) properly. 2 Check the event log for the history of errors that occurred. 1. Enter the Diagnostics Menu. 2. Navigate to EVENT LOG. 3. Touch Display Event Log. Has any connection-related errors occurred? Go to step “111.02–111.04 LED printhead (K) signal failure”. Replace the LED Printhead (K). Go to “LED printhead removal”. |
| Error code: | 111.02 ... 111.04 |
| Description: | Open circuit detected in the LED printhead. 111.02 Service printhead error LED printhead (K) failure 111.03 Service printhead error LED printhead (K) failure 111.04 Service printhead error LED printhead (K) failure |
| Remedy: | 1 Check the LED printhead. Is the above component properly connected? Go to step 2. Replace the connections. Replace the printhead flat data cable. 2 Replace the LED printhead. Go to “LED printhead removal”. Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 112.01 |
| Description: | Service printhead error LED printhead (C) failure Open circuit detected in the LED printhead. |
| Remedy: | 1 Check the LED Printhead (C) for proper installation. Is the LED Printhead (C) properly installed? Go to step 2. Install the LED Printhead (C) properly. 2 Check the event log for the history of errors that occurred 1. Enter the Diagnostics Menu. 2. Navigate to EVENT LOG. 3. Touch Display Event Log. Has any connection-related errors occurred? Go to step “112.02–112.04 LED printhead (C) signal failure”. Replace the LED Printhead (C). Go to “LED printhead removal”. |
| Error code: | 112.02 ... 112.04 |
| Description: | Open circuit detected in the LED printhead. 112.02 Service printhead error LED printhead (C) failure 112.03 Service printhead error LED printhead (C) failure 112.04 Service printhead error LED printhead (C) failure |
| Remedy: | 1 Check the LED printhead. Is the above component properly connected? Go to step 2. Replace the connections. Replace the printhead flat data cable. 2 Replace the LED printhead. Go to “LED printhead removal”. Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 113.01 |
| Description: | Service printhead error LED printhead (M) failure Open circuit detected in the LED printhead. |
| Remedy: | 1 Check the LED printhead (M) for proper installation. Is the LED printhead (M) properly installed? Go to step 2. Install the LED printhead (M) properly. 2 Check the event log for the history of errors that occurred. 1. Enter the Diagnostics Menu. 2. Navigate to EVENT LOG. 3. Touch Display Event Log. Has any connection-related errors occurred? Go to step “113.02–113.04 LED printhead signal failure (M)”. Replace the LED Printhead (M). Go to “LED printhead removal”. |
| Error code: | 113.02 ... 113.04 |
| Description: | Open circuit detected in the LED printhead. 113.02 Service printhead error LED printhead (M) failure 113.03 Service printhead error LED printhead (M) failure 113.04 Service printhead error LED printhead (M) failure |
| Remedy: | 1 Check the LED printhead. Is the above component properly connected? Go to step 2. Replace the connections. Replace the printhead flat data cable. 2 Replace the LED printhead. Go to “LED printhead removal”. Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 114.01 |
| Description: | Service printhead error LED printhead (Y) failure Open circuit detected in the LED printhead. |
| Remedy: | 1 Check the LED printhead (Y) for proper installation. Is the LED printhead (Y) properly installed? Go to step 2. Install the LED printhead (Y) properly. 2 Check the event log for the history of errors that occurred. 1. Enter the Diagnostics Menu. 2. Navigate to EVENT LOG. 3. Touch Display Event Log. Has any connection-related errors occurred? Go to “113.02–113.04 LED printhead signal failure (M)”. Replace the LED printhead (Y). Go to “LED printhead removal”. |
| Error code: | 114.02 ... 114.04 |
| Description: | Open circuit detected in the LED printhead. 114.02 Service printhead error LED printhead (Y) failure 114.03 Service printhead error LED printhead (Y) failure 114.04 Service printhead error LED printhead (Y) failure |
| Remedy: | 1 Check the LED printhead. Is the above component properly connected? Go to step 2. Replace the connections. Replace the printhead flat data cable. 2 Replace the LED printhead. Go to “LED printhead removal”. Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.01 |
| Description: | Service printhead error Multiple LED printhead power supply failure Power is not supplied correctly in more than one LED printhead. |
| Remedy: | 1 Check each LED printhead for proper connections. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the printhead flat data cable assembly. Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the lower engine PCBA card assembly. Go to “Lower engine PCBA removal”. Go to step 5. Problem resolved 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.02 |
| Description: | Service printhead error Single LED printhead power supply failure Power is not supplied correctly in one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 3. Replace the connections. 2 Replace the printhead flat data cable assembly. Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the lower engine PCBA card assembly. Go to “Lower engine PCBA removal”. Go to step 5. Problem resolved 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.03 |
| Description: | Service printhead error Multiple LED printhead download failure An error occurs in downloading data from more than one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 3. Replace the connections. 2 Replace the printhead flat data cable assembly. Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the lower engine PCBA card assembly. Go to “Lower engine PCBA removal”. Go to step 5. Problem resolved 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.04 |
| Description: | Service printhead error Single LED printhead download failure An error occurs in downloading data from one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the LED printhead. Go to “LED printhead removal”. Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead flat data cable assembly. Does the error remain? Go to step 3. Problem resolved 4 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 5 POR the machine. Does the error continue? Replace the lower engine PCBA card assembly. Go to “Lower engine PCBA removal”. Go to step 6. Problem resolved 6 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.05 |
| Description: | Service printhead error Multiple LED printhead mismatch failure The model numbers of multiple LED Printheads do not match. |
| Remedy: | 1 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the printhead interface contact. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.06 |
| Description: | Service printhead error Single LED printhead mismatch failure |
| Remedy: | 1 Check the LED printhead. Is the correct LED printhead installed? Check the LED printhead installation and connections. Install with the correct LED printhead. Go to “LED printhead removal”. |
| Error code: | 115.07 |
| Description: | Service printhead error Multiple LED printhead read failure Communication failed between the upper engine PCBA and more than one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the printhead interface contact. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA card assembly. Go to “Lower engine PCBA removal”. Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.08 |
| Description: | Service printhead error Single LED printhead read failure Communication failed between the upper engine PCBA and one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the printhead flat data cable Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the lower engine PCBA . Go to “Lower engine PCBA removal”. Go to step 5. Problem resolved 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.09 |
| Description: | Service printhead error Multiple LED printhead write failure Communication failed between the upper engine PCBA and more than one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the printhead interface contact. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.10 |
| Description: | Service printhead error Single LED printhead write failure Communication failed between the upper engine PCBA and one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper installation. Is the LED Printhead properly installed? Go to step 2. Install the LED printhead properly. 2 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 3. Replace the connections. 3 Replace the printhead flat data cable Does the error remain? Go to step 4. Problem resolved 4 Replace the printhead interface contact. Does the error remain? Go to step 5. Problem resolved 5 Check the PC/developer drive motor assembly. Is the above component properly installed? Go to step 6. Replace connections and re-install the PC/developer drive motor assembly. 6 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 7. Problem resolved 7 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.11 |
| Description: | Service printhead error Multiple LED printhead communication failure Communication failed between the upper engine PCBA and more than one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper installation. Is the LED Printhead properly installed? Go to step 2. Install the LED printhead properly. 2 Replace the printhead flat data cable Does the error remain? Go to step 3. Problem resolved 3 Replace the printhead interface contact. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 5. Problem resolved 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.12 |
| Description: | Service printhead error Single LED printhead communication failure Communication failed between the upper engine PCBA and one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper installation. Is the LED Printhead properly installed? Go to step 2. Install the LED printhead properly. 2 Check the LED printhead for proper connections. Is the above component properly connected? Replace the LED printhead. Go to “LED printhead removal”. Go to step 3. Replace the connections. 3 Replace the printhead flat data cable Does the error remain? Go to step 4. Problem resolved 4 Replace the printhead interface contact. Does the error remain? Go to step 5. Problem resolved 5 Check the PC/developer drive motor assembly. Is the above component properly installed? Go to step 6. Replace connections and reinstall the PC/developer drive motor assembly. 6 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 7. Problem resolved 7 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.13 |
| Description: | Service printhead error Multiple LED printhead clock failure Synchronization failed on multiple LED printheads. |
| Remedy: | 1 Check the LED printhead for proper connections. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the printhead interface contact. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.14 |
| Description: | Service printhead error Single LED printhead clock failure Synchronization failed on one LED printhead. |
| Remedy: | 1 Check the LED printhead for proper installation. Is the LED Printhead properly installed? Go to step 2. Install the LED printhead properly. 2 Check the LED printhead for proper connections. Is the above component properly connected? Replace the LED printhead. Go to “LED printhead removal”. Go to step 3. Replace the connections. 3 Replace the printhead flat data cable Does the error remain? Go to step 4. Problem resolved 4 Replace the printhead interface contact. Does the error remain? Go to step 5. Problem resolved 5 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 6. Problem resolved 6 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 115.15 |
| Description: | Service tray error Tray module logic failure An error was detected in the tray module. |
| Remedy: | 1 Check the tray module PCBA for proper connection. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the tray module PCBA. Go to “Tray module controller PCBA removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 6. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 120.01 |
| Description: | Service fuser error Fuser motor failure An error was detected in the fuser motor. |
| Remedy: | 1 Check the fuser drive motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch Fuser/lower redrive/ 1st transfer retract motor. Does the above component operate properly? Go to step 3. Go to step 2. 2 Check the fuser drive motor for proper connection. Is the above component properly connected? Replace the fuser drive motor. Go to “Fuser/lower redrive/1st BTR retract motor removal”. Replace the connections. 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 120.02 |
| Description: | Service fuser error Fuser pressure roll retract motor failure An error was detected at the fuser pressure rolls and motor. |
| Remedy: | 1 Check the fuser pressure roll retract motor. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser pressure roll retract motor. Go to “Fuser pressure roll retract motor removal”. Does the error remain? Go to step 3. Problem resolved 3 Check the fuser assembly. Is the above component properly connected? Go to step 2. Replace the connections. 4 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 5 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 6. Problem resolved 6 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.01 |
| Description: | Service fuser error Encoder pulse fail No change was detected on the speed of the belt for more than 1 second. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.03 |
| Description: | Service fuser error Heat belt (center) disconnection error Open circuit is detected at the fuser heat belt. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.04 |
| Description: | Service fuser error Heat belt (center) overheat error Temperature in the heat belt has exceeded the limit. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.05 |
| Description: | Service fuser error Heat belt (rear) disconnection error Open circuit is detected at the fuser heat belt. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.06 |
| Description: | Service fuser error Heat belt (rear) overheat error Temperature in the heat belt has exceeded the limit. |
| Remedy: | 1 Check the heat roll. Is the heat roll free of any media or foreign particles? Go to step 2. Remove foreign particles, and replace the connections. 2 Check the fuser assembly. Is the above component properly connected? Go to step 3. Replace the connections. 3 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.07 |
| Description: | Service fuser error Heat belt (center) temperature increase failure The temperature is late in reaching a specified temperature within the specified time. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.08 |
| Description: | Service fuser error Heat belt (rear) temperature increase failure The temperature is late in reaching a specified temperature within the specified time. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 4. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.09 |
| Description: | Service fuser error Fuser temperature lag error The temperature is late in reaching a specified temperature within the specified time. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.10 |
| Description: | Service fuser error Heat belt rotation failure Speed of belt rotation did not change within the specified time. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.11 |
| Description: | Service fuser error Fuser temperature recovery failure. The status of the fuser temperature did not switch at the specified time. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 121.12 |
| Description: | Service fuser error Incorrect fuser Wrong fuser is installed. |
| Remedy: | 1 POR the machine. Does the error continue? Replace the fuser assembly. Go to “Fuser assembly removal”. Problem resolved |
| Error code: | 121.13 |
| Description: | Service fuser error Fuser thermostat failure The Fuser Assembly Thermostat is broken. |
| Remedy: | 1 Check the fuser assembly. Is the above component properly connected? Go to step 2. Remove foreign particles, and replace the connections. 2 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 126.01 |
| Description: | Service fuser error Fuser interface failure There is a a broken link between upper engine PCBA and the fuser. |
| Remedy: | 1 Check the fuser driver PCBA. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 126.02 |
| Description: | Service fuser error Fuser driver to upper engine PCBA interface failure There is a broken link between upper engine PCBA and the fuser |
| Remedy: | 1 Check the fuser driver PCBA. Is the above component properly connected? Go to step 2. Replace the connections. 2 POR the machine. Does the error continue? Go to step 3. Problem resolved 3 Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Does the error continue? Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Problem resolved |
| Error code: | 126.03 |
| Description: | Service fuser error Fuser driver communication failure There is a communication error between the fuser and upper engine PCBA |
| Remedy: | 1 Remove the sub LVPS PCBA. Go to “Sub LVPS PCBA removal”. Check the fuser driver PCBA. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 126.04 |
| Description: | Service fuser error Fuser driver freeze failure The processing unit of the fuser driver PCBA has hung up. |
| Remedy: | 1 Remove the sub LVPS PCBA. Go to “Sub LVPS PCBA removal”. Check the fuser driver PCBA. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 126.05 |
| Description: | Service fuser error Fuser driver high voltage error Fuser driver voltage levels has exceeded the specified value. |
| Remedy: | 1 Remove the fuser cooling fan. Go to “Fuser cooling fan removal”. Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Does the error remain? Go to step 2. Problem resolved 2 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 126.06 |
| Description: | LVPS 25V line error was detected. |
| Remedy: | Step 1 Check the fuser for proper installation. Is the fuser properly installed? Go to step 3. Go to step 2. Step 2 Reinstall the fuser. Does the problem remain? Go to step 3. The problem is solved. Step 3 Remove the fuser, and then install a different fuser. See “Fuser removal”. Does the problem remain? Go to step 4. The problem is solved. Step 4 Check the controller board sockets JFSR1 and CN1 connections. Is the cable properly connected? Go to step 6. Go to step 5. Step 5 Reseat the cable. Does the problem remain? Go to step 6. The problem is solved. Step 6 Reset the printer. Does the problem remain? Go to step 7. The problem is solved. Step 7 Replace the LVPS. See “LVPS removal”. Does the problem remain? Go to step 8. The problem is solved. Step 8 Check the LVPS cables for damage. Are the cables free of damage? Go to step 10. Go to step 9. Step 9 Replace the cables. Does the problem remain? Go to step 10. The problem is solved. Step 10 Reset the printer. Does the problem remain? Go to step 11. The problem is solved. Step 11 Replace the LVPS. See “LVPS removal”. Does the problem remain? Go to step 12. The problem is solved. Step 12 Reset the printer. Does the problem remain? Go to step 13. The problem is solved. Step 13 Replace the controller board. See “Controller board removal”. Does the problem remain? Go to step 14. The problem is solved. Step 14 Reset the printer. Does the problem remain? Contact the next level of support. The problem is solved. |
| Error code: | 126.07 |
| Description: | Service fuser error Fuser driver suge failure A surge in voltage is detected in the fuser. |
| Remedy: | 1 POR the machine. Does the error continue? Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Problem resolved |
| Error code: | 126.08 |
| Description: | Service fuser error IGBT high temperature error High temperature is detected at the IGBT. |
| Remedy: | 1 Check the fuser driver PCBA. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 126.09 |
| Description: | Service fuser error IGBT temperature sensor failure Open circuit is detected at the IGBT. |
| Remedy: | 1 Check the fuser driver PCBA. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 126.12 |
| Description: | Service fuser error Input low current error The input current supplied to the fuser is below the lower limit at the specified time. |
| Remedy: | 1 Remove the sub LVPS PCBA. Go to “Sub LVPS PCBA removal”. Check the fuser driver PCBA. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser driver PCBA. Go to “Fuser driver PCBA removal”. Does the error remain? Go to step 3. Problem resolved 3 Replace the fuser assembly. Go to “Fuser assembly removal”. Does the error remain? Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 132.01 |
| Description: | Service engine error ATC sensor(K) failure There is an error at the ATC sensor. |
| Remedy: | 1 Check the path from the toner cartridge to the developer. Is the above component free from obstacles? Go to step 2. Remove the toner blockages, including internal clogs inside the developer and toner cartridge. 2 Check the ATC sensor PCB. Is the above component properly connected? Go to step 3. Replace the connections. 3 Remove the ATC sensor PCB. Go to “ATC sensor PCB removal”. Does the error remain? Go to step 4. Problem resolved 4 Check the toner dispense motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch K toner dispense motor. Does the above component operate properly? Go to step 6. Go to step 5. 5 Check the toner dispense motor for proper connection. Is the above component properly connected? Replace the toner dispense motor. Go to “Toner dispense motor removal”. Replace the connections. 6 Check the developer motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch Developer motor. Does the above component operate properly? Go to step 8. Go to step 7. 7 Check the developer motor for proper connection. Is the above component properly connected? Replace the PC/developer drive motor. Go to “PC/developer drive motor removal”. Replace the connection. 8 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. If the error remains, then go to step 9. Problem resolved 9 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 132.03 |
| Description: | Service engine error ATC sensor(M) failure There is an error at the ATC sensor. |
| Remedy: | 1 Check the path from the toner cartridge to the developer. Is the above component free from obstacles? Go to step 2. Remove the toner blockages, including internal clogs inside the developer and toner cartridge. 2 Check the ATC sensor PCB. Is the above component properly connected? Go to step 3. Replace the connections. 3 Remove the ATC sensor PCB. Go to “ATC sensor PCB removal”. Does the error remain? Go to step 4. Problem resolved 4 Check the toner dispense motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch M toner dispense motor. Does the above component operate properly? Go to step 6. Go to step 5. 5 Check the toner dispense motor for proper connection. Is the above component properly connected? Replace the toner dispense motor. Go to “Toner dispense motor removal”. Replace the connections. 6 Check the developer motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch Developer motor. Does the above component operate properly? Go to step 8. Go to step 7. 7 Check the developer motor for proper connection. Is the above component properly connected? Replace the PC/developer drive motor. Go to “PC/developer drive motor removal”. Replace the connection. 8 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. If the error remains, then go to step 9. Problem resolved 9 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 132.04 |
| Description: | Service engine error ATC sensor(C) failure There is an error at the ATC sensor. |
| Remedy: | 1 Check the path from the toner cartridge to the developer. Is the above component free from obstacles? Go to step 2. Remove the toner blockages, including internal clogs inside the developer and toner cartridge. 2 Check the ATC sensor PCB. Is the above component properly connected? Go to step 3. Replace the connections. 3 Remove the ATC sensor PCB. Go to “ATC sensor PCB removal”. Does the error remain? Go to step 4. Problem resolved 4 Check the toner dispense motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch C toner dispense motor. Does the above component operate properly? Go to step 6. Go to step 5. 5 Check the toner dispense motor for proper connection. Is the above component properly connected? Replace the toner dispense motor. Go to “Toner dispense motor removal”. Replace the connections. 6 Check the developer motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch Developer motor. Does the above component operate properly? Go to step 8. Go to step 7. 7 Check the developer motor for proper connection. Is the above component properly connected? Replace the PC/developer drive motor. Go to “PC/developer drive motor removal”. Replace the connection. 8 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. If the error remains, then go to step 9. Problem resolved 9 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 137.01 |
| Description: | Service engine error ATC sensor(Y) failure There is an error at the ATC sensor. |
| Remedy: | 1 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 140.01 |
| Description: | Service engine error Registration drive motor failure. The registration drive motor is not functioning. |
| Remedy: | 1 Check the registration motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch Registration motor. Does the above component operate properly (motor rotating)? Go to step 3. Go to step 2. 2 Check the registration motor for proper connection. Is the above component properly connected? Replace the registration drive motor. Go to “Registration drive motor removal”. Replace the connections. 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. If the error remains, then go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 141.01 |
| Description: | Service engine error Drum drive motor (K) failure The PC drive motor is not functioning. |
| Remedy: | 1 Check the drum motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch KCMY drum & transfer belt motor. Does the above component operate properly (motor rotating)? Go to step 3. Go to step 2. 2 Check the drum motor for proper connection. Is the above component properly connected? Replace the PC/developer drive motor. Go to “PC/developer drive motor removal”. Replace the connections. 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. If the error remains, then go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 141.02 |
| Description: | Service engine error Drum drive motor (Y/M/C) failure The PC drive motor is not functioning. |
| Remedy: | 1 Check the drum motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch KCMY drum & transfer belt motor. Does the above component operate properly (motor rotating)? Go to step 3. Go to step 2. 2 Check the drum motor for proper connection. Is the above component properly connected? Replace the PC/developer drive motor. Go to “PC/developer drive motor removal”. Replace the connections. 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 151.01 |
| Description: | Service engine error Transfer belt motor failure The transfer belt motor is not functioning. |
| Remedy: | 1 Check the transfer belt motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch Transfer belt motor. Does the above component operate properly (motor rotating)? Go to step 3. Go to step 2. 2 Check the transfer belt motor for proper connection. Is the above component properly connected? Replace the transfer belt motor. Go to “PC/developer drive motor removal”. Replace the connections. 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 151.02 |
| Description: | Service engine error First transfer contact/retract failure The first transfer contact/retract motor is not functioning. |
| Remedy: | 1 Check the sensor (1st transfer rolls retract HP) for proper operation. 1. Enter the Diagnostics Menu. 2. Touch SENSOR TESTS. 3. Touch PRINTER SENSOR TESTS. 4. Touch Sensor (1st transfer rolls retract HP). Does the display on the operator panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 3. Go to step 2. 2 Check the sensor (1st transfer rolls retract HP) for proper connection. Is the above component properly connected? Replace the 1st transfer retract clutch assembly. Go to “1st transfer retract clutch assembly removal”. Replace the connections. 3 Check the 1st transfer rollers retract motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch 1st transfer rollers retract motor (contracted). 5. Touch 1st transfer rollers retract motor (retracted). Does the above component operate properly (motor rotating)? Go to step 5. Go to step 4. 4 Check the 1st belt rolls retract motor for proper connection. Is the above component properly connected? Replace the 1st transfer belt rolls retract motor. Go to “Fuser/ lower redrive/1st BTR retract motor removal”. Replace the connections. 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 154.01 |
| Description: | Service engine error Developer (Y/M/C) motor The developer motor is not functioning. |
| Remedy: | 1 Check the developer motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch Developer motor. Does the above component operate properly (motor rotating)? Go to step 3. Go to step 2. 2 Check the developer motor for proper connection. Is the above component properly connected? Replace the PC/developer drive motor. Go to “PC/developer drive motor removal”. Replace the connections. 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. If the error remains, then go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 155.01 |
| Description: | Service engine error Toner dispense motor (K) failure The toner dispense motor is not functioning. |
| Remedy: | 1 Replace the toner cartridge. Does the error remain? Go to step 2. Problem resolved 2 Check the toner smart chip PCB. Is the above component properly connected? Go to step 3. Replace the connections. 3 Check the toner dispense motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch K toner dispense motor. Does the above component operate properly (motor rotating)? Go to step 5. Go to step 4. 4 Check the toner dispense motor for proper connection. Is the above component properly connected? Replace the toner dispense motor. Go to “Toner dispense motor removal”. Replace the connections. 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 156.01 |
| Description: | Service engine error Toner dispense motor (C) failure The toner dispense motor is not functioning. |
| Remedy: | 1 Replace the toner cartridge. Does the error remain? Go to step 2. Problem resolved 2 Check the toner smart chip PCB. Is the above component properly connected? Go to step 3. Replace the connections. 3 Check the toner dispense motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch C toner dispense motor. Does the above component operate properly (motor rotating)? Go to step 5. Go to step 4. 4 Check the toner dispense motor for proper connection. Is the above component properly connected? Replace the toner dispense motor. Go to “Toner dispense motor removal”. Replace the connections. 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 157.01 |
| Description: | Service engine error Toner dispense motor (M) failure The toner dispense motor is not functioning. |
| Remedy: | 1 Replace the toner cartridge. Does the error remain? Go to step 2. Problem resolved 2 Check the toner smart chip PCB. Is the above component properly connected? Go to step 3. Replace the connections. 3 Check the toner dispense motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch M toner dispense motor. Does the above component operate properly (motor rotating)? Go to step 5. Go to step 4. 4 Check the toner dispense motor for proper connection. Is the above component properly connected? Replace the toner dispense motor. Go to “Toner dispense motor removal”. Replace the connections. 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 158.01 |
| Description: | Service engine error Toner dispense motor (Y) failure The toner dispense motor is not functioning. |
| Remedy: | 1 Replace the toner cartridge. Does the error remain? Go to step 2. Problem resolved 2 Check the toner smart chip PCB. Is the above component properly connected? Go to step 3. Replace the connections. 3 Check the toner dispense motor for proper operation. When performing motor tests, ensure that all cover and door interlock switches are overridden. 1. Enter the Diagnostics Menu. 2. Touch MOTOR TESTS. 3. Touch PRINTER MOTOR TESTS. 4. Touch Y toner dispense motor. Does the above component operate properly (motor rotating)? Go to step 5. Go to step 4. 4 Check the toner dispense motor for proper connection. Is the above component properly connected? Replace the toner dispense motor. Go to “Toner dispense motor removal”. Replace the connections. 5 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 171.01 |
| Description: | Service engine error Controller cooling fan failure |
| Remedy: | The controller cooling fan is not functioning. |
| Error code: | 171.02 |
| Description: | Service engine error Fuser cooling fan failure The fuser cooling fan is not functioning. |
| Remedy: | 1 Check the fuser cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser cooling fan. Go to “Fuser cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower printer engine PCBA. Go to “Lower engine PCBA removal”. If the error remains go to step 4. Problem resolved 4 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 172.01 |
| Description: | Service engine error Front upper cooling fan failure The front upper cooling fan is not functioning. |
| Remedy: | 1 Check the front upper cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the front upper cooling fan. Go to “Front upper cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 173.01 |
| Description: | 173.01 Service engine error LVPS cooling fan failure The LVPS cooling fan is not functioning. |
| Remedy: | 1 Check the LVPS sub cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the LVPS sub cooling fan. Go to “LVPS sub cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 174.01 |
| Description: | Service engine error Rear left lower cooling fan failure The HVPS cooling fan is not functioning. |
| Remedy: | 1 Check the charge roll HVPS cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the charge roll HVPS cooling fan. Go to “Charge roll HVPS cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 175.01 |
| Description: | Service engine error Front right cooling fan failure The front right cooling fan is not functioning. |
| Remedy: | 1 Check the front right cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the front right cooling fan. Go to “Front right cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 175.03 |
| Description: | Service engine error PC/developer drive motor cooling fan failure The PC/developer drive motor is not functioning. |
| Remedy: | 1 Check the PC/developer drive motor cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the PC/developer drive motor cooling fan. Go to “PC/ developer drive motor cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 175.04 |
| Description: | Service engine error Front left cooling fan failure The front left cooling fan is not functioning. |
| Remedy: | 1 Check the front left cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the front left cooling fan. Go to “Front left cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 175.05 |
| Description: | Service engine error Suction fan failure The suction fan is not functioning. |
| Remedy: | 1 Check the suction fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the suction fan. Go to “Suction fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 175.06 |
| Description: | Service engine error Rear upper cooling fan failure The rear upper cooling fan is not functioning. |
| Remedy: | 1 Check the front upper cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the front upper cooling fan. Go to “Front upper cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 175.07 |
| Description: | Service engine error Rear upper center cooling fan failure The rear upper center cooling fan is not functioning. |
| Remedy: | 1 Check the fuser driver PCBA cooling fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the fuser driver PCBA cooling fan. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 175.08 |
| Description: | Service engine error Rear left upper cooling fan failure The rear left upper cooling fan is not functioning. |
| Remedy: | 1 Check the upper exhaust fan. Is the above component properly connected? Go to step 2. Replace the connections. 2 Replace the upper exhaust fan. Go to “Upper exhaust cooling fan removal”. Does the error continue? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 191.01 |
| Description: | Service engine error Lower engine PCBA detect failure The lower engine PCBA is not detected. |
| Remedy: | 1 POR the machine. Does the error remain? Go to step 2. Problem resolved 2 Check the lower engine PCBA. Is the above component properly connected? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Go to step 2. Replace the connections. 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 191.02 ... 191.05 |
| Description: | Service engine error Fuse on the upper engine PCBA has blown. |
| Remedy: | 1 POR the machine. Does the error remain? Go to step 2. Problem resolved 2 Check the upper engine PCBA. Is the above component properly connected? Replace the upper engine PCBA. Go to “Lower engine PCBA removal”. Replace the connections. |
| Error code: | 191.06 |
| Description: | Service engine error Fuse 2 on the lower engine PCBA has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the following parts circuits for overcurrent and overvoltage. • LED printhead (Y, M, C, K) • Printhead interface contact (Y, M, C, K) Are the current and voltage values normal? Go to step 2. Replace the faulty parts. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.08 |
| Description: | Service engine error Fuse 4 on the lower engine PCBA has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the following parts circuits for overcurrent and overvoltage: • Tray module controller PCBA • HCF Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.09 |
| Description: | Service engine error Fuse 5 on the lower engine PCBA has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the finisher circuit for overcurrent and overvoltage. Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.10 |
| Description: | The tray 1 lift plate did not move to the correct position. |
| Remedy: | Step 1 Enter the Diagnostics menu, and then navigate to: PRINTER SETUP > Reset Engine Service Error Does the problem remain? Go to step 2. The problem is solved. Step 2 Enter the Diagnostics menu, and then navigate to: MOTOR TESTS > PRINTER MOTOR TESTS > Tray 1 Lift Does the motor run? Go to step 5. Go to step 3. |
| Error code: | 191.11 |
| Description: | Service engine error Fuse 7 on the lower engine PCBA has blown. A fuse has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the following parts circuits for overcurrent and overvoltage: • Fuser cooling fan • LVPS cooling fan • Rear left exhaust fan • Rear upper cooling fan • Front right cooling fan Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.12 |
| Description: | Service engine error Fuse 8 on the lower engine PCBA has blown. A fuse has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the following parts circuits for overcurrent and overvoltage: • MPF tray feeder motor. • Upper redrive motor. • Duplex motor. Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.13 |
| Description: | Service engine error Lower engine PCBA fuse 9 blown A fuse has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the toner dispense motor (Y, M, C, K) for overcurrent and overvoltage. Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.14 |
| Description: | Service engine error Lower engine PCBA fuse 10 blown A fuse has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the following parts circuits for overcurrent and overvoltage: • 2nd transfer roller contact retract motor • Printer left duplex door assembly Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.15 |
| Description: | Service engine error Lower engine PCBA fuse 11 blown A fuse has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the following parts circuits for overcurrent and overvoltage: • Fuser drive motor • Registration drive motor Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.16 |
| Description: | Service engine error Lower engine PCBA fuse 12 blown A fuse has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the following parts circuits for overcurrent and overvoltage: • PC/Developer drive motor • Fuser drive motor assembly Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.17 |
| Description: | Service engine error Lower engine PCBA fuse 13 blown A fuse has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the PC/Developer drive motor (Y,M,C) circuits for overcurrent and overvoltage: Are the current and voltage values normal? Go to step 2. Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.18 |
| Description: | Service engine error Upper engine PCBA data failure Data values are not normal on the upper engine memory. |
| Remedy: | 1 POR The machine. Does the error continue? Go to step 2 Problem resolved 2 Install the correct version of the firmware. Does the problem persist? Turn the power OFF, and replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 191.19 |
| Description: | Service engine error Upper engine PCBA access failure Data values are not normal on the upper engine memory. |
| Remedy: | 1 POR The machine. Does the error continue? Go to step 2 Problem resolved 2 Turn the power OFF and check whether there is poor connection between the EEPROM and the upper engine PCBA. Are there no problems with the connection? Turn the power OFF, and replace the upper printer engine assembly. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 191.20 |
| Description: | Service engine error Upper engine PCBA buffer failure Data values are not normal on the upper engine memory. |
| Remedy: | 1 POR The machine. Does the error continue? Go to step 2 Problem resolved 2 Turn the power OFF, and check whether there is poor connection between the EEPROM and the upper engine PCBA. Are there no problems with the connection? Turn the power OFF, and replace the upper printer engine assembly. Go to “Upper printer engine PCBA removal”. |
| Error code: | 191.23 |
| Description: | Service engine error Fuse 14 on the lower engine PCBA has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the following parts circuits for overcurrent and overvoltage: • Upper redrive assembly • Lower redrive shift motor assembly Are the current and voltage values normal? Go to step 2 Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.24 |
| Description: | Service engine error Fuse 15 on the lower engine PCBA has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the upper redrive assembly circuits for overcurrent and overvoltage: Are the current and voltage values normal? Go to step 2 Replace the faulty parts, or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 191.25 |
| Description: | Service engine error Fuse 16 on the lower engine PCBA has blown. |
| Remedy: | 1 Warning: Remove the cause of blown fuse before replacing the lower engine PCBA. Check the registration/transport roller assembly. Are the current and voltage values normal? Go to step 2 Replace the faulty part or repair the circuits. 2 POR the machine. Does the error continue? Replace the lower engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 201 |
| Display: | ERROR 201 COMMAND |
| Description: | PU F/W Flash write error (Reserved) |
| Causes: | • Defective polygon motor • Defective harness |
| Remedy: | 1. Connect the cable correctly. 2. Replace the engine control board. 3. Replace the laser scanning unit. 4. Check or replace the cable. |
| Error code: | 202 |
| Display: | ERROR 202 PARAMETER |
| Description: | Polygon motor error 1: ON timeout |
| Causes: | The polygon mirror motor does not reach the targeted operating speed within 5 sec. after turning on or changing speed. |
| Error code: | 230 |
| Display: | Service Call 230: Error |
| Description: | Paper Jam Clear Paper Path Leave Job in Finisher area 5 |
| Causes: | • Defective ASIC (Lupus) • Poor connection between controller and EGB. • Defective EGB |
| Remedy: | Primary: Paper has most likely jammed in the duplex option. Remove the duplex tray to access the jam. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages indicating the accumulated sheets should not be removed during jam clearing. Note: When the secondary message is displayed, if the accumulated sheets are removed the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled. If removing the jammed media does not fix the problem, go to “230 Paper Jam” on page 2-74. |
| Error code: | 231 |
| Display: | Service Call 231: Error |
| Description: | FGATE OFF error: Bk • The PFGATE ON signal still asserts within 5 seconds after processing the image in normal job or MUSIC for end position [K]. • The PFGATE ON signal still asserts when the next job starts. |
| Causes: | • Defective ASIC (Lupus) • Poor connection between controller and EGB. • Defective EGB |
| Remedy: | 1. Check the connection between the controller board and the BCU. 2. Replace the BCU. 3. Replace the controller board. |
| Error code: | 24x |
| Description: | Paper Jam Clear Paper Path Leave Job in Finisher area 5 |
| Remedy: | Primary: This paper jam message can apply to both the 500-sheet Option Tray and HCIT option. Tray x (x=2 through 4). Open the option side access door and then the tray. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages indicating the accumulated sheets should not be removed during jam clearing. Note: When the secondary message is displayed, if the accumulated sheets are removed the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled. If removing the jammed media does not fix the problem, go to “24x Paper Jam” on page 2-74. |
| Error code: | 250 |
| Display: | Service Call 250: Error |
| Description: | Paper Jam Clear Paper Path Leave Job in Finisher area 5 |
| Causes: | • Disconnected or defective harness to synchronizing detector for start position • Defective laser synchronizing detector for start position • Defective LDB |
| Remedy: | Primary: Paper is jammed in the MPF. Secondary: If sheets have been accumulated to be stapled when the jam is detected, the printer alternately flashes the primary and secondary messages indicating the accumulated sheets should not be removed during jam clearing. Note: When the secondary message is displayed, if the accumulated sheets are removed the printer will not reprint these sheets. Also if the print job is completed, the portion of the job printed after the jam will not be stapled. If removing the jammed media does not fix the problem, go to “250 Paper Jam” on page 2-78. |
| Error code: | 281 |
| Description: | GAPCI communication error Data is transferred. - The CPU does not detect the communication ACK signal from GAPCI. |
| Causes: | • Defective BCU |
| Remedy: | Jam is detected at the fuser or the bridge unit. |
| Error code: | 28y.xx |
| Description: | paper jams |
| Remedy: | Jam is detected at the ADF. |
| Error code: | 31.xx |
| Description: | Missing or defective [color] cartridge |
| Remedy: | Try one or more of the following: 1. Remove and reinstall the specified print cartridge. For instructions on removing a print cartridge, touch More Information. 2. Touch Continue to clear the message. Note: If the message is not cleared, then replace the defective print cartridge. |
| Error code: | 32.xx |
| Description: | [color] cartridge part number unsupported by device |
| Remedy: | Remove the unsupported toner cartridge, and then install a supported one. |
| Error code: | 34 |
| Description: | Non-continuous labels are being treated as continuous labels. |
| Causes: | The printer was not calibrated for the media being used. The printer is configured for continuous media. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. |
| Error code: | 35 |
| Description: | All lights are on, but nothing displays on the LCD, and the printer locks up. |
| Causes: | Internal electronic or firmware failure. |
| Remedy: | Turn the printer power off (O) and then on (I). If the printer locks up again, replace the main logic board. |
| Error code: | 36 |
| Description: | The printer locks up while running the Power-On Self Test. |
| Causes: | Main logic board failure. |
| Remedy: | Replace the main logic board. |
| Error code: | 37 |
| Description: | Non-continuous labels are being treated as continuous labels. |
| Causes: | The printer is configured for continuous media. The printer was not calibrated for the media being used. |
| Remedy: | Set the media type to noncontinuous media. See Set Media Type on page 56. Perform the calibration procedure in Calibrate Media and Ribbon Sensors on page 67. |
| Error code: | 38 |
| Description: | All lights are on, but nothing displays on the LCD, and the printer locks up. |
| Causes: | Internal electronic or firmware failure. |
| Remedy: | Turn the printer power Off (O) and then On (I). If the printer locks up again, replace the main logic board. |
| Error code: | 39 |
| Description: | The printer locks up while running the Power-On Self Test. |
| Causes: | Main logic board failure. |
| Remedy: | Replace the main logic board. |
| Error code: | 455 |
| Description: | Staple Jam |
| Remedy: | A jam is detected at the stapler. |
| Error code: | 4yy.xx |
| Description: | Paper Jam Check [area] |
| Remedy: | Jam is detected at the bridge unit. |
| Error code: | 50 |
| Display: | Tray 2 Paper Empty |
| Description: | Fuser Fan Failure The Fuser Fan rotation signal indicates to the Engine Control Board that the fan is no longer operational. |
| Causes: | • Fuser Fan, PL5.3.31 • FAN/PHD/MOT Harness, PL10.1.9 • Engine Control Board, PL9.1.16 |
| Remedy: | 1 Check the Fuser Fan for damage. Remove the Front Cover. Is the fan damaged? Replace the Fuser Fan. Go to Step 2. 2 Check the Fuser Fan connection. Is P/J482 connected to the harness? Go to Step 2. Reconnect the Fan. 3 Check orientation of the Fuser Fan. Does the Fan’s label face into the chute? Go to Step 3. Correct the installation. 4 Test the Fuser Fan. Run the Service Diagnostics Fuser Fan test. Does the Fan operate. Go to Step 6. Go to Step 5. 5 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J482. 2. Check continuity between J48 <=> P483. Go to Step 5. Replace the FAN/PHD/MOT Harness. 6 Check the fan rotation signal. Print one sheet. Is there +3.3 V across P/J48-A12 <=> P/J48-A13? Replace the Engine Control Board. Replace the Fuser Fan. |
| Error code: | 51 |
| Display: | Send Error (DNS) |
| Description: | Rear Fan Failure The Rear Fan rotation signal indicates the fan is no longer operational. |
| Causes: | • Rear Fan, PL1.1.19 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16 • LV Harness, PL10.1.2 |
| Remedy: | 1 Check the Rear Fan for damage. Remove the Rear Cover. Is the fan damaged? Replace the Rear Fan. Go to Step 2. 2 Check the Rear Fan connection. Is P/J166 connected to the harness? Go to Step 3. Connect the Fan. 3 Check orientation of the Rear Fan. Does the Fan’s label face inwards? Go to Step 4. Correct the installation. 4 Test the Rear Fan. Run the Service Diagnostics Rear Fan test. Does the fan operate? Go to Step 6. Go to Step 5. 5 Check for +24 V to the fan. Disconnect P/J166. Is there +24 V across P166-1 <=> P166-3? Replace the Rear Fan. Replace the LVPS. 6 Check the fan rotation signal to the LVPS. Print one sheet. Is there +3.3 V between P/J166-1 <=> P/J166-3? Replace the Fuser Fan. Go to Step 7. 7 Check the rotation signal from the LVPS. Print one sheet. Is there +3.3 V between P/J165-15 <=> P/J165-3? Replace the LVPS. Go to Step 8. 8 Check the fan rotation signal at the Engine Control Board. Print one sheet. Is there +3.3 V between P/J61-4 <=> P/J61-16? Replace the LV Harness Replace the Engine Control Board. |
| Error code: | 52 |
| Display: | Send Error (POP3) |
| Description: | Fan Failure One of the two fans has failed resulting in a fatal error. |
| Causes: | • Rear Fan, PL1.1.19 • Fuser Fan, PL5.3.31 |
| Remedy: | 1 Check the fans for damage or debris: • Fuser Fan, PL1.1.19 • Rear Fan, PL5.3.31 Is either fan damaged? Replace the defective fan. Go to Step 3. 2 Replace the defective fan. Does the error persist? Go to Step 3 Complete 3 Test the fans. Run the Service Diagnostics fan tests to isolate the defective fan. Did one of the fans fail? Go to the troubleshooting procedure for the specific fan. If both fans pass, replace the Engine Control Board. |
| Error code: | 53 |
| Display: | Send Error (SMTP) |
| Description: | The password did not match in a relay or mailbox transmission, and the transmission ended in failure. |
| Causes: | · Loose cable connection · Defective controller fan · Defective IOD1 board · Defective MCTL board |
| Remedy: | Confirm that both parties are using the same system password and the both units are compatible. Then, ask the remote party to transmit again. |
| Error code: | 54 |
| Display: | Send Error (Wrong Config) |
| Description: | 10-398 ERROR 54 FAN FAILURE |
| Causes: | · Loose cable connection · Defective ozone fan · Defective IOD2 board · Defective MCTL board |
| Remedy: | Enter Service Diagnostics Mode. Run the “Fuser Fan” test. Does the Fuser Fan operate? Y↓N→ Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the voltage between P530-1 on the Engine Control Board and frame ground. Does the voltage measure +24 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-4 on the Engine Control Board and frame ground. Does the voltage measure 0 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-3 on the Engine Control Board and frame ground. Does the voltage measure +5 VDC? Y↓N→ Replace the Engine Control Board. If the problem persists, repair or replace the harness between Engine Control Board and the Fuser Fan. Replace the Fuser Fan Assembly. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the voltage between P530-5 on the Engine Control Board and frame ground. Does the voltage measure +24 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-8 on the Engine Control Board and frame ground. Does the voltage measure 0 VDC? Y↓N→ Replace the Engine Control Interface Board. Measure the voltage between P530-7 on the Engine Control Board and frame ground. Does the voltage measure +5 VDC? Y↓N→ Replace the Engine Control Board. If the problem persists, repair or replace the harness between Engine Control Board and the +24 VDC LVPS Fan. Replace the +24 VDC LVPS Fan. |
| Error code: | 55 |
| Display: | [Stop Pressed] |
| Description: | Stop/Clear has been pressed during a fax transmission. |
| Causes: | · Loose cable connection · Defective fusing unit fan · Defective IOD1 board · Defective MCTL board |
| Remedy: | Try again. |
| Error code: | 56 |
| Display: | Toner Empty |
| Description: | The toner cartridge has run out. The machine stops printing. |
| Causes: | Harness connection failure of back cover switch ASSY. Eject actuator failure. Eject sensor PCB ASSY failure. Main PCB failure |
| Remedy: | Replace the toner cartridge with a new one. |
| Error code: | 58 |
| Display: | Tray 1 Paper Empty |
| Description: | There is no paper in the tray 1. |
| Causes: | Harness connection failure between fuser unit and eject sensor PCB. Fuser unit failure. LVPS PCB failure. Eject sensor PCB ASSY failure. Main PCB failure |
| Remedy: | Load paper in the tray 1. |
| Error code: | 61 |
| Display: | Nongenuine Toner Replace Toner 1 |
| Description: | The toner cartridge installed is not a genuine cartridge. |
| Causes: | The printer warms up when the printer is turned on or the cover is closed, or wake from sleep mode. |
| Remedy: | This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge. |
| Error code: | 62 |
| Display: | Nongenuine Toner Replace Toner |
| Description: | The toner cartridge installed is not a genuine cartridge. |
| Causes: | · Loose cable connection · Defective development clutch for magenta · Defective IOD2 board · Defective MCTL board |
| Remedy: | This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge. |
| Error code: | 63 |
| Display: | Toner Exhausted |
| Description: | HOST_IF_NO_DRIVER:PCI |
| Causes: | Harness connection failure of new toner sensor harness ASSY. Harness connection failure of toner sensor PCB unit ASSY. New toner sensor harness ASSY failure (Toner empty). Toner sensor PCB unit ASSY failure. Main PCB failure. |
| Remedy: | You can select either stop or continue. It you do not select any, the printer will as stop is selected. If you select stop, you cannot print untill the genuine cartridge is installed. If you select continue, you can keep printing but the guality cannot be guaranteed, and the product svpport is no longer provided. If you wunt to change the selection, turn the printer off and on to gave this message apper again, and then re-select stop or continue. |
| Error code: | 80 |
| Display: | ERROR 80 FORMAT |
| Description: | Engine Logic Board Failure, Code 80 |
| Remedy: | 1. Cycle power to the printer to clear the error. 2. Did this clear the error? Complete Replace the engine control board or the image processor board. |
| Error code: | 80.xx |
| Description: | Fuser life warning |
| Remedy: | • Order a replacement fuser immediately. When print quality is reduced, install the new fuser, following the instruction sheet that came with the replacement part. • Touch Continue to clear the message and continue printing. |
| Error code: | 82.xx |
| Description: | Waste toner bottle nearly full |
| Remedy: | Order a replacement waste toner bottle immediately. 1. Replace the waste toner bottle. For instructions on installing the waste toner bottle, from the printer control panel touch More Information. 2. Touch Continue to clear the message and continue printing. |
| Error code: | 84 |
| Display: | h`******** |
| Description: | Controller to Engine Logic Board Time Failure, Code 84 |
| Remedy: | 1. Cycle power to the printer to clear the error. 2. Did this clear the error? Complete. Replace the engine control board. |
| Error code: | 841.00 |
| Description: | Service scanner failure Image pipeline ASIC failure The image pipeline for processing the data that comes from the scanner, prior to being printed, has failed. |
| Remedy: | 1 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, then go to step 2. 2 Turn the printer off for 60 seconds. Does the error occur when the power is turned off/on again? Replace the RIP card assembly. Go to “RIP PCBA removal”. Problem resolved 3 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, then go to step 2. |
| Error code: | 842.00 |
| Description: | Service scanner failure Scanner communication failure Controller detected a communication failure. Communication timeout. |
| Remedy: | 1 Check the scanner interface cable assembly connection between the RIP card assembly and the scanner unit assembly. Is the scanner interface cable assembly connected properly? Go to step 2. Replace the connection. 2 Check all connections of the scanner controller PCBA. Are the connections of the scanner controller card assembly connected properly? Go to step 3. Connect each connector of the scanner controller card assembly properly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Go to step 4. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP PCBA. Go to “RIP PCBA removal”. Problem resolved |
| Error code: | 842.01 |
| Description: | Service scanner failure Scanner communication failure Controller detected a communication failure packet timeout. |
| Remedy: | 1 Check the scanner interface cable assembly connection between the RIP card assembly and the scanner unit assembly. Is the scanner interface cable assembly connected properly? Go to step 2. Replace the connection. 2 Check all connections of the scanner controller PCBA. Are the connections of the scanner controller card assembly connected properly? Go to step 3. Connect each connector of the scanner controller card assembly properly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Go to step 4. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP PCBA. Go to “RIP PCBA removal”. Problem resolved |
| Error code: | 842.02 |
| Description: | Service scanner failure Scanner communication failure Controller detected a communication failure. Invalid message checksum. |
| Remedy: | 1 Check the scanner interface cable assembly connection between the RIP card assembly and the scanner unit assembly. Is the scanner interface cable assembly connected properly? Go to step 2. Replace the connection. 2 Check all connections of the scanner controller PCBA. Are the connections of the scanner controller card assembly connected properly? Go to step 3. Connect each connector of the scanner controller card assembly properly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Go to step 4. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP PCBA. Go to “RIP PCBA removal”. Problem resolved |
| Error code: | 842.03 |
| Description: | Service scanner failure Scanner communication failure Controller detected a communication failure. Invalid message parameter(s). |
| Remedy: | 1 Check the scanner interface cable assembly connection between the RIP card assembly and the scanner unit assembly. Is the scanner interface cable assembly connected properly? Go to step 2. Replace the connection. 2 Check all connections of the scanner controller PCBA. Are the connections of the scanner controller card assembly connected properly? Go to step 3. Connect each connector of the scanner controller card assembly properly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Go to step 4. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP card assembly. Go to “RIP PCBA removal”. Problem resolved |
| Error code: | 842.04 |
| Description: | Service scanner failure Scanner communication failure Controller detected a communication failure. Invalid message command. |
| Remedy: | 1 Check the scanner interface cable assembly connection between the RIP card assembly and the scanner unit assembly. Is the scanner interface cable assembly connected properly? Go to step 2. Replace the connection. 2 Check all connections of the scanner controller PCBA. Are the connections of the scanner controller card assembly connected properly? Go to step 3. Connect each connector of the scanner controller card assembly properly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Go to step 4. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP PCBA. Go to “RIP PCBA removal”. Problem resolved |
| Error code: | 842.10 |
| Description: | failure Scanner unit assembly - ADF communication failure Communication failure occurred between the scanner controller card assembly and the ADF controller card assembly. |
| Remedy: | 1 Check all connections of the scanner controller card assembly. Are the connections of the scanner controller card assembly connected properly? Go to step 2. Replace all connections. 2 Check all connections of the ADF controller PCBA. Are the connections of the ADF controller card assembly connected properly? Go to step 3. Replace all connections. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the ADF controller PCBA. Go to “ADF controller PCBA removal”. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 842.11 |
| Description: | Service scanner failure Scanner communication failure (by scanner) Communication failure occurred between the scanner controller card assembly and the RIP card assembly. |
| Remedy: | 1 Check all connections of the scanner controller card assembly. Are the connections of the scanner controller card assembly connected properly? Go to step 2. Replace all connections. 2 Check all connections of the ADF controller PCBA. Are the connections of the ADF controller card assembly connected properly? Go to step 3. Replace all connections. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the ADF controller PCBA. Go to “ADF controller PCBA removal”. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 842.12 |
| Description: | Service scanner failure Scanner unit assembly communication failure Communication failure occurred between the scanner controller card assembly and the RIP card assembly. |
| Remedy: | 1 Check all connections of the scanner controller card assembly. Are the connections of the scanner controller card assembly connected properly? Go to step 2. Replace all connections. 2 Check all connections of the ADF controller PCBA. Are the connections of the ADF controller card assembly connected properly? Go to step 3. Replace all connections. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the ADF controller PCBA. Go to “ADF controller PCBA removal”. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 843.00 |
| Description: | The flatbed scanner carriage home position is not detected by the sensor (flatbed scanner home position). |
| Remedy: | Step 1 Check the ADF to flatbed scanner connection for proper connectivity. Is the above connection properly connected? Go to step 2. Replace the connection. Step 2 Check the sensor (flatbed scanner home position) for damage or detachment. Is the above sensor properly attached or free from damage? Go to step 3. Reattach or replace the sensor (flatbed scanner home position). Step 3 Check the sensor (flatbed scanner home position) for proper operation. a Enter the Diagnostics Menu. b Touch SCANNER TESTS. c Touch Sensor Tests. d See the line item “sensor (flatbed scanner home position).” Does the display on the operator panel change every time the sensing area of the above sensor is interrupted or blocked? Go to step 5. Go to step 4. Step 4 Check the sensor (flatbed scanner home position) for proper connection. Is the above component properly connected? Reattach or replace the sensor (flatbed scanner home position). Replace the connection. Step 5 Check the flatbed scanner drive motor for proper operation. a Enter the Diagnostics Menu. b Touch MOTOR TESTS. c Touch flatbed drive motor. d Perform test. Does the motor operate properly? Go to step 7. Go to step 6. Step 6 Check the flatbed scanner motor for proper connection. Is the above component properly connected? Replace the ADF rear side drive parts pack. Replace the connection. Step 7 Place an undamaged document on the flatbed scanner and perform a scanner test. Does the problem remain? Replace the flatbed scanner controller board. See “Flatbed scanner PCBA removal”. Problem resolved. Step 8 Place an undamaged document on the flatbed scanner and perform a scanner test. Does the problem remain? Replace the ADF controller board. See “ADF controller card removal”. Problem resolved. |
| Error code: | 843.05 |
| Description: | Service scanner failure Scanner carriage over run failure The scanner carriage has over run. |
| Remedy: | 1 Check the connections of the scanner controller PCBA. Are the connectors of the scanner controller card assembly connected properly? Go to step 2. Connect each connector of the scanner controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 843.10 |
| Description: | Service scanner failure ADF RAM test failure The ADF controller card assembly RAM has failed in the read/write operation. |
| Remedy: | 1 Check the connection between the ADF controller PCBA and the scanner controller PCBA. Are the ADF controller card assembly and the scanner controller card assembly connected properly? Replace the ADF controller PCBA. Go to “ADF controller PCBA removal”. Connect the ADF controller card assembly and the scanner controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Go to step 3. |
| Error code: | 843.11 |
| Description: | failure ADF EEPROM failure The ADF-EEPROM failed during the read/ write operation. |
| Remedy: | 1 Check the connection of each ADF controller card assembly connector. Is each connector of ADF controller card assembly connected properly? Go to step 2. Connect each connector of ADF controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the ADF controller PCBA. Go to “ADF controller PCBA removal”. Problem resolved |
| Error code: | 843.20 |
| Description: | Service scanner failure Scanner unit assembly connection failure There is an open circuit in the scanner interface cable assembly between the scanner controller card assembly and the RIP card assembly. |
| Remedy: | 1 Check the connection of each ADF controller card assembly connector. Is each connector of ADF controller card assembly connected properly? Go to step 2. Connect each connector of ADF controller card assembly properly. 2 Check the connection of each RIP card assembly connector. Are the connectors of the RIP card assembly connected properly? Go to step 3. Connect each connector of the RIP card assembly properly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the ADF controller PCBA. Go to “ADF controller PCBA removal”. Problem resolved |
| Error code: | 843.21 |
| Description: | Service scanner failure Scanner unit assembly EEPROM failure The scanner unit assembly EEPROM failed during the read/write operation. |
| Remedy: | 1 Check the connections of the scanner controller card assembly connector Is each connector of scanner controller card assembly connected properly? Go to step 2. Connect each connector of the scanner controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the ADF controller PCBA. Go to “ADF controller PCBA removal”. Problem resolved |
| Error code: | 843.22 |
| Description: | Service scanner failure Scanner unit assembly EEPROM sub system failure The scanner unit assembly EEPROM failed during the read/write operation |
| Remedy: | 1 Check the connection of each scanner controller card assembly connector. Are the connectors of the scanner controller card assembly connected properly? Go to step 2. Connect each connector of the scanner controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller card assembly. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 843.24 |
| Description: | Service scanner failure Image processing failure An failure occurred in the imageprocessing system. |
| Remedy: | 1 Check the connections of the scanner controller card assembly. Are the connectors of the scanner controller card assembly connected properly? Go to step 2. Connect each connector of the scanner controller card assembly properly. 2 Check the software version for the scanner controller card assembly. Is the version of the software of the scanner controller card assembly correct? Go to step 3. Upgrade the software of the scanner controller card assembly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 843.25 |
| Description: | Service scanner failure Scanner controller card assembly failure 1 An internal processing failure occurred in the scanner controller card assembly. |
| Remedy: | 1 Check the connection of each scanner controller card assembly connector. Is each connector of scanner controller card assembly connected properly? Go to step 2. Connect each connector of the scanner controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 843.26 |
| Description: | Service scanner failure Scanner controller card assembly failure 2 An internal processing failure occurred in the scanner controller card assembly |
| Remedy: | 1 Check the connection of each scanner controller card assembly connector. Is each connector of scanner controller card assembly connected properly? Go to step 2. Connect each connector of scanner controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 844.00 |
| Description: | Service scanner failure Exposure lamp failure A failure has occurred with the exposure lamp. |
| Remedy: | 1 Check the exposure lamp for connection. Is the above component connected properly? Replace the exposure lamp. Go to “LED exposure bar removal”. Replace the connection. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 844.01 |
| Description: | Rear scan module output level error |
| Remedy: | 1 Check the large platen glass. Is the large platen glass installed properly? Go to step 2. Remove and clean the large platen glass. Go to “Large platen glass removal”. Reinstall the large platen glass properly. Go to step 3. 2 Remove the large platen glass. Check the bottom of the large platen glass in the vicinity the white reference strip for contamination. Is the vicinity of white reference strip contaminated? Clean the bottom of the large platen glass in the vicinity of the white reference strip. Reinstall the large platen glass properly. Go to step 3. Go to step 4. 3 Perform a POR. Does the error remain? Go to step 4. Problem resolved 4 Check the exposure lamp for connection. Is the above component connected properly? Replace the exposure lamp. Go to “LED exposure bar removal”. Replace the connection. 5 Perform a POR. Does the error continue when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem resolved |
| Error code: | 845.00 |
| Description: | Service Image Processing Unit |
| Causes: | This error code indicates a failure of the image processing ASIC. |
| Remedy: | Replace the scanner control card (SCC). 1 Scanner control card Replace the scanner control card. See “Scanner control card removal”. |
| Error code: | 845.01 |
| Description: | Rear scan module cable failure or SCC card failure |
| Remedy: | 1 Check the exposure lamp for connection. Is the above component connected properly? Replace the exposure lamp. Go to “LED exposure bar removal”. Replace the connection. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem solved. |
| Error code: | 845.02 |
| Description: | Cable / SCC Failure |
| Remedy: | 1 Check the connection of the scanner controller card assembly. Are the connectors of the scanner controller card assembly connected properly? Go to step 2. Connect each connector of the scanner controller card assembly properly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Problem solved. |
| Error code: | 846.00 |
| Description: | Flatbed fan has failed. |
| Remedy: | 1 Remove the scanner rear cover. See “Scanner rear cover removal”. Check the cable for proper connection. Is the cable connected properly? Replace the flatbed fan. See “Flatbed scanner cooling fan removal”. Reseat the cable. |
| Error code: | 846.01 |
| Description: | Rear calibration strip unusable |
| Remedy: | 1 Check the scanner interface cable assembly connection between the RIP card assembly and the scanner unit assembly. Is the scanner interface cable assembly connected properly? Go to step 2. Replace the connection. 2 Check all connections of the scanner controller card assembly. Are the connections of the scanner controller card assembly connected properly? Go to step 3. Connect each connector of the scanner controller card assembly properly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller card assembly. Go to “Scanner controller PCBA removal”. Problem solved. |
| Error code: | 846.10 |
| Description: | Service scanner failure Sensor (ADF scan width [x]) failure The combinations of outputs from the sensor (ADF scan width 1), sensor (ADF scan width 2) and sensor (ADF scan width 3) are abnormal. |
| Remedy: | 1 Check the sensor (ADF scan width 1) for operation. Perform the sensor (ADF scan width 1) test. Open the ADF left cover assembly. 1. Enter the Diagnostics Menu. 2. Touch SENSOR TESTS. 3. Touch ADF/SCANNER TESTS. 4. Touch Sensor(ADF scan width 1). Operate the actuator of the sensor (ADF scan width 1). Does the display on the operator panel change every time the sensing area of the above sensor is blocked? Go to step 3. Go to step 2. 2 Check the sensor (ADF scan width 1) for connection. Is the above sensor connected properly? Replace the sensor (ADF scan width 1). Go to “Sensor (ADF scan width 1) removal”. Replace the connection. 3 Check the sensor (ADF scan width 2) for operation. Perform the sensor (ADF scan width 2) test. Open the ADF left cover assembly. 1. Enter the Diagnostics Menu. 2. Touch SENSOR TESTS. 3. Touch ADF/SCANNER TESTS. 4. Touch Sensor(ADF scan width 2). Operate the actuator of the sensor (ADF scan width 2). Does the display on the operator panel change every time the sensing area of the above sensor is blocked? Go to step 5. Go to step 4. 4 Check the sensor (ADF scan width 2) for connection. Is the above sensor connected properly? Replace the sensor (ADF scan width 2). Go to “Sensor (ADF scan width 2) removal”. Replace the connection. 5 Check the sensor (ADF scan width 3) for operation. Perform the sensor (ADF scan width 3) test. Open the ADF left cover assembly. 1. Enter the Diagnostics Menu. 2. Touch SENSOR TESTS. 3. Touch ADF/SCANNER TESTS. 4. Touch Sensor(ADF scan width 3). Operate the actuator of the sensor (ADF scan width 3). Does the display on the operator panel change every time the sensing area of the above sensor is blocked? Go to step 7. Go to step 6. 6 Check the sensor (ADF scan width 3) for connection. Is the above sensor connected properly? Replace the sensor (ADF scan width 3). Go to “Sensor (ADF scan width 3) removal”. Replace the connection. 7 Place an undamaged document in the ADF, and perform an ADF test. Does the error remain? Replace the ADF controller card assembly. Go to “ADF controller PCBA removal”. Go to step 8. |
| Error code: | 846.12 |
| Description: | Service scanner failure Scanner unit assembly software logic failure A software failure was detected by the scanner controller card assembly. |
| Remedy: | 1 Check the software version for the scanner controller card assembly. Is the version of the software of the scanner controller card assembly correct? Go to step 2. Upgrade the software of the scanner controller card assembly. 2 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller card assembly. Go to “Scanner controller PCBA removal”. Problem solved. |
| Error code: | 846.13 |
| Description: | Service scanner error Switch (platen interlock) open The system detected that the switch (platen interlock) is open. |
| Remedy: | 1 Check the ADF for opening and closing. Does the ADF lay completely flush on the scanner unit when it is in its closed position? Go to step 2. Inspect and adjust the ADF left hinge and right hinge as required. 2 Check the sensor (ADF angle) for proper installation. Is the sensor (FB angle) installed correctly? Go to step 3. Reinstall the sensor (ADF angle). 3 Check the sensor (ADF angle) for operation. Perform the sensor (ADF angle) test. 1. Enter the Diagnostics Menu. 2. Touch SENSOR TESTS. 3. Touch ADF/SCANNER. 4. Touch Sensor (ADF angle). Open and close the ADF unit assembly. Does the display on the operator panel change every time the sensing area of the above sensor is blocked? Go to step 5. Go to step 4. 4 Check the sensor (ADF angle) for connection. Is the above sensor connected properly? Replace the sensor (ADF angle). Go to “Sensor (ADF angle) removal”. Replace the connection. 5 Place an undamaged document in the ADF, and perform an ADF test. Does the error remain? Replace the scanner controller card assembly. Go to “Scanner controller PCBA removal”. Go to step 6. |
| Error code: | 849.00 |
| Description: | Machine has an installed modem but ConfigID indicates that it should not. |
| Remedy: | Remove the modem. |
| Error code: | 84.xx |
| Description: | [color] photoconductor missing |
| Remedy: | Install the specified color photoconductor, following the instruction sheet that came with the replacement part. |
| Error code: | 900.58 |
| Description: | Service data error Scanner communication error Check the scanner connections. |
| Remedy: | 1 Check the scanner interface cable assembly connection between the RIP card assembly and the scanner unit assembly. Is the scanner interface cable assembly connected properly? Go to step 2. Replace the connection. 2 Check all connections of the scanner controller PCBA. Are the connections of the scanner controller card assembly connected properly? Go to step 3. Connect each connector of the scanner controller card assembly properly. 3 Perform a POR. Does the error remain when the power is turned off/on? Replace the scanner controller PCBA. Go to “Scanner controller PCBA removal”. Go to step 4. Problem resolved 4 Perform a POR. Does the error remain when the power is turned off/on again? Replace the RIP PCBA. Go to “RIP PCBA removal”. Problem resolved |
| Error code: | 910.02 ... 910.07 |
| Description: | Service data error Data communication error. Firmware upgrade is needed. |
| Remedy: | 1 Upgrade the firmware. Does the problem persist? Go to step 2. Problem resolved 2 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 939.00 |
| Display: | 939.00 Service RIP engine Comm. |
| Description: | RIP–engine communications lost. |
| Causes: | System board |
| Remedy: | POR the printer several times, if the error code continues to be displayed, replace the system board. |
| Error code: | 940.02 |
| Description: | Service data error Clock signal communication error The clock signal failed to reach the upper printer PCBA. |
| Remedy: | 1 Check the upper printer engine PCBA connections. Are the above connections properly connected and not damaged? Go to step 2. Connect the components properly and replace damaged connections. 2 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the lower printer engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 940.03 |
| Description: | Service data error Controller communication failure A software control-related error has occurred. |
| Remedy: | 1 Check the bridge controller PCBA connections. Are the above connections properly connected and not damaged? Go to step 2. Connect the components properly and replace damaged connections. 2 Replace the bridge PCBA. Go to “Bridge PCBA removal”. Does the error remain? Go to step 3. Problem resolved 3 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 940.04 |
| Description: | Service data error IM logic failure A software control-related error has occurred. |
| Remedy: | 1 Install the correct firmware. Does the problem persist? Go to step 2. Problem resolved 2 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 951.xx |
| Description: | Error with secure NVRAM on the controller board |
| Remedy: | Replace the system card assembly. |
| Error code: | 953.xx |
| Description: | NVRAM chip failure with mirror |
| Remedy: | Replace the operator panel door assembly. |
| Error code: | 955.xx |
| Description: | The code ROM or NAND flash failed the Cyclic Redundancy Check or the NAND experienced an uncorrectible multi-bit failure. |
| Remedy: | Replace the system card assembly. |
| Error code: | 956.00 |
| Description: | System board |
| Causes: | This error indicates a system board processor failure. |
| Remedy: | Replace the system board. |
| Error code: | 956.01 |
| Display: | 956.01 Service system board |
| Description: | Processor overheated |
| Causes: | The RIP card assembly has exceeded safe operating temperature. |
| Remedy: | Replace the system card assembly. |
| Error code: | 956.02 |
| Display: | 956.02 Service system board |
| Description: | Processor fan failure The processor fan has failed. |
| Causes: | The RIP card assembly cooling fan is not functioning properly. |
| Remedy: | 1 Turn the printer off, and open the system board shield. Check the cable in connector J3 (system board fan connector) for proper connection to the system board. Is the cable properly connected? Go to step 2. Reseat the cable. 2 Replace the processor fan. See XXXX POR the printer. Does the error reoccur? Replace the system board. See “System board removal”. Problem solved. |
| Error code: | 956.03 |
| Description: | Service system board error RIP card assembly FPGA failure The RIP card assembly has failed. |
| Remedy: | 1 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, then go to step 2. 2 Turn the printer off for 60 seconds. Does the error occur when the power is turned off/on again? Replace the RIP PCBA. Go to “RIP PCBA removal”. Problem solved. |
| Error code: | 957.01 |
| Description: | Service data error BITZ1 initialize failure A data-loading error has occurred. |
| Remedy: | 1 Check the printhead flat data cable connections. Are the above connections properly connected and not damaged? Go to step 2. Problem resolved. 2 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 957.02 |
| Description: | Service data error BITZ2 initialize failure A data-loading error has occurred. |
| Remedy: | 1 Check the printhead flat data cable connections. Are the above connections properly connected and not damaged? Go to step 2. Problem resolved 2 POR the machine. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Problem resolved |
| Error code: | 980.04 |
| Display: | 980.04 Service duplex comm. |
| Description: | Service duplex comm. Duplex controller card assembly communication failure A communication error occurred between the printer engine card assembly and the duplex controller card assembly. |
| Causes: | A communication error occurred between the printer engine card assembly and the duplex controller card assembly. |
| Remedy: | 1 Check the duplex unit for proper installation. Remove the duplex unit assembly, and reinstall it. Perform a 2-sided print test. Does the error still occur? Go to step 2. Problem solved. 2 Check the duplex controller card assembly and printer engine card assembly for proper connection. Are the connections on the duplex controller card assembly and the connector P417 on the printer engine card assembly connected? Go to step 3. Replace the connection. 3 Perform a 2-sided print test. Does the error still occur? Replace the printer left duplex door assembly. Go to “Printer left duplex door assembly removal”. Go to step 4. Problem solved. 4 POR the machine, and perform a print test. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Go to step 5. Problem resolved 5 POR the machine, and perform a print test. Does the error continue? Replace the lower printer engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 980.05 |
| Description: | Service flicker communication error Engine flicker communication failure A communication error has occurred in the printer engine card assembly. |
| Remedy: | 1 Perform a POR. Does the error occur when the power is turned off/on? Go to step 2. Perform several print tests. If the problem remains, then go to step 2. 2 POR the machine, and perform a print test. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. If the error remains, then go to step 3. Problem resolved 3 POR the machine, and perform a print test. Does the error continue? Replace the lower printer engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 995.00 |
| Display: | 995.00 Service finisher NV. |
| Description: | Service finisher NVM error Finisher NVM R/W failure A read/write error occurred on the NVM of the finisher controller card assembly. |
| Causes: | A read/write error occurred on the NVM of the finisher controller card assembly. |
| Remedy: | 1 Turn the finisher off and on several times. Does the error still occur when the power is on? Go to step 2. Problem resolved 2 Check the finisher controller PCBA. Are the connections of the finisher controller card assembly properly connected? Replace the finisher controller PCBA. Go to “Finisher PCBA removal”. Problem resolved |
| Error code: | 996.00 |
| Display: | 996.00 Service wrong finisher |
| Description: | Finisher type failure |
| Causes: | An incorrect type of finisher is connected. |
| Remedy: | 1 Check the printer and finisher installation. Is the finisher installed to the printer properly? Go to step 2. Reinstall the finisher. 2 Turn the finisher on and off. Does the error still occur when the power is back on? Go to step 3. Problem resolved 3 Check the finisher controller PCBA. Are the connections of the finisher controller card assembly properly connected? Replace the finisher controller PCBA. Go to “Finisher PCBA removal”. Replace the connections. |
| Error code: | 997.00 |
| Display: | 997.00 Service wrong duplex |
| Description: | Duplex controller card assembly type failure |
| Causes: | A duplex controller card assembly of a different specification is installed. |
| Remedy: | 1 Check the duplex unit for proper installation. Remove duplex unit assembly, and reinstall it. Perform a 2-sided print test. Does the error still occur? Go to step 2. Problem resolved 2 Perform a 2-sided print test. Does the error still occur? Replace the duplex controller card assembly. Go to “Printer left duplex door assembly removal”. Go to step 3. Problem resolved 3 POR the machine, and perform a print test. Does the error continue? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. Go to step 4. Problem resolved 4 POR the machine, and perform a print test. Does the error continue? Replace the lower printer engine PCBA. Go to “Lower engine PCBA removal”. Problem resolved |
| Error code: | 999.00 |
| Display: | 999.00 Service finisher error |
| Description: | Finisher engine/RIP functional failure |
| Causes: | The engine reported a finisher failure that the RIP card assembly did not recognize. |
| Remedy: | 1 Turn the printer off and on several times. Does the error still occur when the power is on? Go to step 2. Problem resolved 2 Check the finisher controller card assembly connections. Are the connections of the finisher controller card assembly properly connected? Replace the finisher controller card assembly. Go to “Finisher PCBA removal”. Problem resolved 3 Check the upper printer engine card assembly connections. Are the connections of the printer engine card assembly properly connected? Replace the upper printer engine PCBA. Go to “Upper printer engine PCBA removal”. If the error remains, then go to step 4. Problem resolved 4 Check the lower printer engine card assembly connections. Are the connections of the printer engine card assembly properly connected? Replace the lower printer engine PCBA. Go to “Lower engine PCBA removal”. If the error remains, then go to step 5. Problem resolved 5 Check the RIP card assembly connections. Are the connections of the RIP card assembly properly connected? Replace the RIP card assembly. Go to “RIP PCBA removal”. Problem resolved |
Название
LEXMARK Тонер-картридж голубой
LEXMARK Тонер-картридж черный
LEXMARK Тонер-картридж пурпурный
LEXMARK Тонер-картридж желтый
LEXMARK Картридж со скрепками 4 шт. в упаковке
LEXMARK Картриджи со скрепками (3 упаковки)
LEXMARK Блок фотобарабана, комплект из 3 шт
LEXMARK Контейнер для отработаного тонера
