Mimaki JV3-250SP
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
пьезоэлектрическая струйная
Макс. формат
A0
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Макс. формат |
A0 |
Размещение |
напольный |
Технология печати |
пьезоэлектрическая струйная |
Тип |
струйный |
Телефон |
|
Копир |
|
Сканер |
|
Факс |
|
Цветность печати |
цветная |
Тип устройства |
Принтер |
Принтер |
|
Макс. ширина рулона |
62 дюйм, (158 см) |
Количество цветов |
6 |
Печать без полей |
|
Прямая печать |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
| По X | 1 440 |
| По Y | 1 440 |
Печать на: |
|
| Рулоне |
|
| Глянцевой бумаге |
|
| Фотобумаге |
|
| Пленках |
|
| Матовой бумаге |
|
| CD/DVD |
|
| Карточках |
|
| Конвертах |
|
| Этикетках |
|
Телефон |
|
Проводная трубка |
|
Caller ID |
|
Автоответчик |
|
Беспроводная трубка |
|
АОН |
|
Спикерфон |
|
Стандарт DECT |
|
Языки управления |
|
| PCL 6 |
|
| PPDS |
|
| PostScript 3 |
|
| PostScript 2 |
|
| PostScript |
|
| PCL 5c |
|
| PCL 5e |
|
Финишер |
|
Сортер |
|
Электронная сортировка |
|
Брошюровщик |
|
Степлер |
|
Сортировка со сдвигом |
|
Интерфейсы |
|
Инфракрасный порт |
|
Устройство для чтения карт памяти |
|
RS-232 |
|
Ethernet (RJ-45) |
|
USB |
|
Wi-Fi |
|
Bluetooth |
|
FireWire (IEEE 1394) |
|
LPT |
|
Дополнительная информация |
|
Поддержка ОС |
|
| Windows |
|
| DOS |
|
Потребляемая мощность |
|
| При работе | 1 500 |
Габариты |
|
Высота |
1 300 |
Ширина |
3 600 |
Вес |
350 |
Глубина |
1 000 |
Модули
Y-DRIVE ASSY.
COVER ASSY. - 2/3
CARTRIDGE ASSY.
COVER ASSY. - 3/3
ELECTRICAL UNIT ASSY. - 1/3
CLAMP ASSY. - 2/2
X-DRIVE ASSY.
HEAD ASSY. - 2/2
STATION ASSY.
Y-BAR ASSY.
FRAME ASSY.
COVER ASSY. - 1/3
PLATEN ASSY. - 2/2
HEAD ASSY. - 1/2
CLAMP ASSY. - 1/2
TAKE-UP DEVICE ASSY. - 2/2
SLIDER ASSY.
ROLL ASSY.
ELECTRICAL UNIT ASSY. - 3/3
DRY FAN ASSY.
ELECTRICAL UNIT ASSY. - 2/3
LEG ASSY.
TAKE-UP DEVICE ASSY. - 1/2
WIPER ASSY.
PLATEN ASSY. - 1/2
ROLL SUPPORT BASE ASSY.
Детали CLAMP ASSY. - 2/2
| Деталь: | Y-T pulley shaft |
| Парткод: | M202841 |
| Деталь: | Y-driven pulley |
| Парткод: | M201966 |
| Деталь: | Y-driven pulley assy. |
| Парткод: | M004368 |
| Деталь: | Y-spring plate |
| Парткод: | M503406 |
| Деталь: | Y-spring |
| Парткод: | M800569 |
| Деталь: | Y-T pulley bracket |
| Парткод: | M502878 |
| Деталь: | Y-T fulcrum pin |
| Парткод: | M202842 |
| Деталь: | Y-T bracket |
| Парткод: | M502877 |
| Деталь: | T-base plate 250S |
| Парткод: | M504494 |
| Деталь: | D bracket US |
| Парткод: | M503933 |
| Деталь: | Y-drive pulley |
| Парткод: | M201960 |
| Деталь: | D-pulley |
| Парткод: | M202822 |
| Деталь: | Y-drive pulley assy. |
| Парткод: | M004363 |
| Деталь: | YM-top plate S |
| Парткод: | M504175 |
| Деталь: | YM-spacer S |
| Парткод: | M203729 |
| Деталь: | Y-motor bracket S |
| Парткод: | M504174 |
| Деталь: | DM pulley |
| Парткод: | M202666 |
| Деталь: | Y-axis motor assy. |
| Парткод: | E300342 |
| Деталь: | D-bracket 250S |
| Парткод: | M504495 |
| Деталь: | Y-axis motor junction cable 250 assy. |
| Парткод: | E102367 |
| Деталь: | Y-drive belt 250S |
| Парткод: | M800651 |
| Деталь: | Belt holder 1 |
| Парткод: | M400160 |
| Деталь: | Belt support S |
| Парткод: | M503786 |
| Деталь: | Belt screw |
| Парткод: | M400140 |
| Деталь: | Belt holder |
| Парткод: | M400161 |
| Деталь: | Y-axis motor / pulley assy. |
| Парткод: | M005144 |
| Деталь: | Keyboard seat S |
| Парткод: | M903254 |
| Деталь: | LCD COVER |
| Парткод: | M600520 |
| Деталь: | Keyboard panel |
| Парткод: | M601203 |
| Деталь: | KEY TOP |
| Парткод: | M601024 |
| Деталь: | Keyboard PCB assy. |
| Парткод: | E102058 |
| Деталь: | Keyboard cable assy. |
| Парткод: | E102211 |
| Деталь: | Rear CL cover |
| Парткод: | M503985 |
| Деталь: | Rear cover R SP |
| Парткод: | M504606 |
| Деталь: | Absorber ST |
| Парткод: | M903220 |
| Деталь: | Cover bracket R 250S |
| Парткод: | M504512 |
| Деталь: | Heater switch bracket 250S |
| Парткод: | M504510 |
| Деталь: | Heater switch assy. |
| Парткод: | E102292 |
| Деталь: | Green-pilot lamp R assy. |
| Парткод: | E102294 |
| Деталь: | Orange-pilot lamp R assy. |
| Парткод: | E102301 |
| Деталь: | Green-pilot lamp P assy. |
| Парткод: | E102293 |
| Деталь: | Orange-pilot lamp P assy. |
| Парткод: | E102300 |
| Деталь: | Station cover F SP |
| Парткод: | M504615 |
| Деталь: | RIGHT COVER |
| Парткод: | M601201 |
| Деталь: | Y-cover stay R |
| Парткод: | M503983 |
| Деталь: | FG wire 2 assy. |
| Парткод: | E102351 |
| Деталь: | Power supply cover SP |
| Парткод: | M504616 |
| Деталь: | Remote switch assy. |
| Парткод: | E102334 |
| Деталь: | Cartridge guide 2 |
| Парткод: | M600593 |
| Деталь: | ID cable assy. |
| Парткод: | E102009 |
| Деталь: | ID PCB holder |
| Парткод: | M601054 |
| Деталь: | ID contact PCB assy. |
| Парткод: | E101959 |
| Деталь: | Cartridge frame |
| Парткод: | M600887 |
| Деталь: | Cartridge guide 1 |
| Парткод: | M600592 |
| Деталь: | RS O-ring 1.1x2.2 |
| Парткод: | M700323 |
| Деталь: | Cartridge holder L 250S |
| Парткод: | M504376 |
| Деталь: | Ink guide plate L |
| Парткод: | M504509 |
| Деталь: | Plate spring (C) |
| Парткод: | M502166 |
| Деталь: | Cartridge base R |
| Парткод: | M600595 |
| Деталь: | IO PCB bracket 250S |
| Парткод: | M504498 |
| Деталь: | Ink guide plate R |
| Парткод: | M504508 |
| Деталь: | RS O-ring 2.9x1.4 |
| Парткод: | M700325 |
| Деталь: | Cartridge base L |
| Парткод: | M600594 |
| Деталь: | Cartridge base 1P |
| Парткод: | M601295 |
| Деталь: | Electrical cover L250S |
| Парткод: | M504383 |
| Деталь: | Guide rail L |
| Парткод: | M503998 |
| Деталь: | Guide rail R250S |
| Парткод: | M504377 |
| Деталь: | Electrical cover C250S |
| Парткод: | M504385 |
| Деталь: | Electrical case 250S |
| Парткод: | M504550 |
| Деталь: | OP connector bracket 250SP |
| Парткод: | M504601 |
| Деталь: | Tube end SP |
| Парткод: | M203967 |
| Деталь: | Waste tank guide |
| Парткод: | M600654 |
| Деталь: | Tank guide SP |
| Парткод: | M504583 |
| Деталь: | Waste ink tank 2L |
| Парткод: | M601163 |
| Деталь: | Fan motor 1 250 assy. |
| Парткод: | E102380 |
| Деталь: | Fan motor 2 250 assy. |
| Парткод: | E102381 |
| Деталь: | Fan motor 3 250 assy. |
| Парткод: | E102382 |
| Деталь: | Fan motor 4 250 assy. |
| Парткод: | E102383 |
| Деталь: | FM-BKT |
| Парткод: | M503988 |
| Деталь: | AC switch 1 250 assy. |
| Парткод: | E102424 |
| Деталь: | AC switch 2 250 assy. |
| Парткод: | E102460 |
| Деталь: | Inlet 250 assy. |
| Парткод: | E102425 |
| Деталь: | Electrical cover R250S |
| Парткод: | M504384 |
| Деталь: | Noise filter 250 assy. |
| Парткод: | E102366 |
| Деталь: | JV4 1394 PCB assy. |
| Парткод: | E102161 |
| Деталь: | I/F connection board assy. |
| Парткод: | E102154 |
| Деталь: | IO2 FPC 250 assy. |
| Парткод: | E102370 |
| Деталь: | IO cable 250 assy. |
| Парткод: | E102369 |
| Деталь: | HDC FPC 250 assy. |
| Парткод: | E102371 |
| Деталь: | Sub DC cable 250 assy. |
| Парткод: | E102378 |
| Деталь: | DC CABLE ASSY. |
| Парткод: | E102212 |
| Деталь: | AC cable 250 assy. |
| Парткод: | E102368 |
| Деталь: | POWER SUPPLY ASSY. |
| Парткод: | E300374 |
| Деталь: | Main PCB 4H assy. |
| Парткод: | E102421 |
| Деталь: | Clamp shaft 250S |
| Парткод: | M203847 |
| Деталь: | Clamp spring 800 |
| Парткод: | M800652 |
| Деталь: | P-holder |
| Парткод: | M503918 |
| Деталь: | Clamp bushing |
| Парткод: | M600694 |
| Деталь: | Clamp cam |
| Парткод: | M601196 |
| Деталь: | PR-base R |
| Парткод: | M503919 |
| Деталь: | Pinch roller (EPDM) |
| Парткод: | M700322 |
| Деталь: | PR-shaft |
| Парткод: | M202720 |
| Деталь: | PR-base F |
| Парткод: | M400181 |
| Деталь: | P-holder shaft |
| Парткод: | M203304 |
| Деталь: | Torque stopper |
| Парткод: | M201970 |
| Деталь: | Limiter base 250S |
| Парткод: | M504447 |
| Деталь: | Helical gear |
| Парткод: | M203645 |
| Деталь: | X-motor plate 250S |
| Парткод: | M504366 |
| Деталь: | X-axis motor assy. |
| Парткод: | E300343 |
| Деталь: | X-motor coupling |
| Парткод: | M203635 |
| Деталь: | X-motor bracket 250S |
| Парткод: | M504367 |
| Деталь: | Left division plate 250S |
| Парткод: | M504382 |
| Деталь: | Worm assy. |
| Парткод: | M004758 |
| Деталь: | Driving roller 250L |
| Парткод: | M203837 |
| Деталь: | Bearing holder 2 |
| Парткод: | M400213 |
| Деталь: | Bearing shaft |
| Парткод: | M203306 |
| Деталь: | L-FS mesh |
| Парткод: | M504579 |
| Деталь: | L-FS cover |
| Парткод: | M504580 |
| Деталь: | L-FS case |
| Парткод: | M601299 |
| Деталь: | L-FS bracket 2 |
| Парткод: | M504582 |
| Деталь: | L-FS bracket 1 |
| Парткод: | M504581 |
| Деталь: | S coupling 250 |
| Парткод: | M203918 |
| Деталь: | Driving roller 250R |
| Парткод: | M203836 |
| Деталь: | BR holder 250 S |
| Парткод: | M203867 |
| Деталь: | BR holder L |
| Парткод: | M203919 |
| Деталь: | HEAD COVER |
| Парткод: | M601304 |
| Деталь: | HEAD LEVER |
| Парткод: | M601204 |
| Деталь: | Head lever bracket 4H |
| Парткод: | M504504 |
| Деталь: | Head lever pin |
| Парткод: | M201958 |
| Деталь: | Head lock screw |
| Парткод: | M600597 |
| Деталь: | Paper width sensor assy. |
| Парткод: | E102205 |
| Деталь: | Cutter actuator assy. |
| Парткод: | E102204 |
| Деталь: | Cutter L |
| Парткод: | M201535 |
| Деталь: | Cutter roller |
| Парткод: | M601085 |
| Деталь: | Cutter screw |
| Парткод: | M400219 |
| Деталь: | CUTTER HOLDER |
| Парткод: | M601086 |
| Деталь: | CUTTER SPRING |
| Парткод: | M800598 |
| Деталь: | CUTTER HOLDER |
| Парткод: | M601053 |
| Деталь: | Cutter bracket |
| Парткод: | M503970 |
| Деталь: | Cutter shaft |
| Парткод: | M203322 |
| Деталь: | Head lock screw assy. |
| Парткод: | M004904 |
| Деталь: | S-cap assy. |
| Парткод: | M004908 |
| Деталь: | Cap spring 225 |
| Парткод: | M800650 |
| Деталь: | Cap slider U |
| Парткод: | M601276 |
| Деталь: | CAP SLIDER D |
| Парткод: | M601275 |
| Деталь: | Cap lever |
| Парткод: | M601192 |
| Деталь: | Cap slider spring |
| Парткод: | M800630 |
| Деталь: | Cap base |
| Парткод: | M601274 |
| Деталь: | Cap adjusting plate 4H |
| Парткод: | M504497 |
| Деталь: | Station support bracket |
| Парткод: | M503943 |
| Деталь: | Station bracket 4H |
| Парткод: | M504496 |
| Деталь: | K-washer |
| Парткод: | M502932 |
| Деталь: | Pump motor 1 assy. |
| Парткод: | E102201 |
| Деталь: | Pump motor gear |
| Парткод: | M400210 |
| Деталь: | Pump motor 2 assy. |
| Парткод: | E102202 |
| Деталь: | Pump motor bracket |
| Парткод: | M503940 |
| Деталь: | Pump -middle gear |
| Парткод: | M601044 |
| Деталь: | Pump bracket SP |
| Парткод: | M504633 |
| Деталь: | S-pump assy. |
| Парткод: | M004868 |
| Деталь: | Cap slider assy. |
| Парткод: | M005248 |
| Деталь: | CAP |
| Парткод: | M504323 |
| Деталь: | Bear guide film 250S |
| Парткод: | M601264 |
| Деталь: | Bear guide 250S |
| Парткод: | M504358 |
| Деталь: | Bear 250S Joint 62 |
| Парткод: | M601272 |
| Деталь: | Bear base |
| Парткод: | M503417 |
| Деталь: | FPC holder S |
| Парткод: | M504006 |
| Деталь: | Bear holder screw |
| Парткод: | M400233 |
| Деталь: | Bear holder 250S |
| Парткод: | M504506 |
| Деталь: | Y-cover stay 250SP |
| Парткод: | M504604 |
| Деталь: | FPC holder |
| Парткод: | M503388 |
| Деталь: | Origin sensor assy. |
| Парткод: | E102207 |
| Деталь: | Sub shaft stay |
| Парткод: | M400159 |
| Деталь: | Main shaft stay 16B |
| Парткод: | M400198 |
| Деталь: | Main guide shaft 250S |
| Парткод: | M203840 |
| Деталь: | Sub guide shaft 250S |
| Парткод: | M203841 |
| Деталь: | Scale holder |
| Парткод: | M601077 |
| Деталь: | Bear sound insulation rubber |
| Парткод: | M700333 |
| Деталь: | Y-bar 250S |
| Парткод: | M300799 |
| Деталь: | Y-bar bracket |
| Парткод: | M400157 |
| Деталь: | Frame support plate |
| Парткод: | M503937 |
| Деталь: | Paper sensor assy. |
| Парткод: | E102206 |
| Деталь: | Media sensor bracket SP |
| Парткод: | M504603 |
| Деталь: | Station cover R |
| Парткод: | M503952 |
| Деталь: | Frame 250S |
| Парткод: | M300822 |
| Деталь: | Paper sensor 2 assy. |
| Парткод: | E102438 |
| Деталь: | Bear cover cup 250S |
| Парткод: | M601266 |
| Деталь: | Y-cover 250SP |
| Парткод: | M504610 |
| Деталь: | Exhaust duct |
| Парткод: | M601247 |
| Деталь: | Rear FPC cover |
| Парткод: | M504414 |
| Деталь: | Rear cover L SP |
| Парткод: | M504607 |
| Деталь: | LEFT COVER |
| Парткод: | M601202 |
| Деталь: | Y-cover stay L |
| Парткод: | M503984 |
| Деталь: | Selector R3 250 assy. |
| Парткод: | E102461 |
| Деталь: | Selector R2 250 assy. |
| Парткод: | E102429 |
| Деталь: | Selector P2 250 assy. |
| Парткод: | E102427 |
| Деталь: | Selector P1 250 assy. |
| Парткод: | E102428 |
| Деталь: | Selector R1 250 assy. |
| Парткод: | E102426 |
| Деталь: | X motor cover SP |
| Парткод: | M504617 |
| Деталь: | V selector bracket |
| Парткод: | M504600 |
| Деталь: | X motor cover bracket |
| Парткод: | M504449 |
| Деталь: | Cover bracket L 250S |
| Парткод: | M504513 |
| Деталь: | Left cover angle |
| Парткод: | M504411 |
| Деталь: | Interlock sensor bracket L |
| Парткод: | M504619 |
| Деталь: | Cover sensor L assy. |
| Парткод: | E102439 |
| Деталь: | Interlock sensor cover |
| Парткод: | M504620 |
| Деталь: | Front cover stay L |
| Парткод: | M504622 |
| Деталь: | Front cover U 250SP |
| Парткод: | M504623 |
| Деталь: | Cover sensor R assy. |
| Парткод: | E102440 |
| Деталь: | Front cover stay R |
| Парткод: | M504621 |
| Деталь: | Front cover nut U 250 |
| Парткод: | M504625 |
| Деталь: | Front cover nut L 250 |
| Парткод: | M504626 |
| Деталь: | Switch dog SP |
| Парткод: | M504627 |
| Деталь: | Front cover L 250SP |
| Парткод: | M601316 |
| Деталь: | Interlock sensor bracket R |
| Парткод: | M504618 |
| Деталь: | Platen cover R bracket 250S |
| Парткод: | M504387 |
| Деталь: | ABSORBER |
| Парткод: | M700318 |
| Деталь: | Platen cover F 250S |
| Парткод: | M504556 |
| Деталь: | Platen cover R side plate |
| Парткод: | M504608 |
| Деталь: | Damper holder 4H |
| Парткод: | M504503 |
| Деталь: | Damper holder |
| Парткод: | M600998 |
| Деталь: | AD plate S |
| Парткод: | M504020 |
| Деталь: | Belt screw |
| Парткод: | M400140 |
| Деталь: | Angle spring |
| Парткод: | M800570 |
| Деталь: | Head unit base |
| Парткод: | M400238 |
| Деталь: | Head bracket 4H |
| Парткод: | M504501 |
| Деталь: | Head unit adjusting plate R |
| Парткод: | M503956 |
| Деталь: | Head angle adjusting plate |
| Парткод: | M503955 |
| Деталь: | Head unit spring |
| Парткод: | M800632 |
| Деталь: | Head unit adjusting screw |
| Парткод: | M400208 |
| Деталь: | Head cover bracket 4H |
| Парткод: | M504502 |
| Деталь: | Head unit adjusting plate L |
| Парткод: | M503957 |
| Деталь: | Adjusting Spring |
| Парткод: | M800566 |
| Деталь: | ADJUSTER |
| Парткод: | M601048 |
| Деталь: | RS O-ring 2.57x1.78 |
| Парткод: | M700324 |
| Деталь: | RS O-ring 2.16x1.4 |
| Парткод: | M700326 |
| Деталь: | RS O-ring 2.9x1.4 |
| Парткод: | M700325 |
| Деталь: | S-damper assy. |
| Парткод: | M004902 |
| Деталь: | Clamp bushing |
| Парткод: | M600694 |
| Деталь: | Clamp end bracket |
| Парткод: | M503920 |
| Деталь: | Clamp sensor assy. |
| Парткод: | E102208 |
| Деталь: | Clamp sensor bracket |
| Парткод: | M503924 |
| Деталь: | Clamp B assy. |
| Парткод: | M503921 |
| Деталь: | Lever G |
| Парткод: | M601090 |
| Деталь: | Clamp link |
| Парткод: | M503922 |
| Деталь: | Roll stopper arm |
| Парткод: | M503925 |
| Деталь: | Roll stopper C |
| Парткод: | M601088 |
| Деталь: | Clamp lever |
| Парткод: | M601066 |
| Деталь: | Clamp lever assy. |
| Парткод: | M503923 |
| Деталь: | Right division plate assy. |
| Парткод: | M503926 |
| Деталь: | Clamp link cover |
| Парткод: | M504003 |
| Деталь: | Roll holder |
| Парткод: | M203855 |
| Деталь: | Take-up shaft 250 |
| Парткод: | M203956 |
| Деталь: | Take-up shaft gear |
| Парткод: | M601297 |
| Деталь: | G protect collar |
| Парткод: | M203857 |
| Деталь: | Take-up case L |
| Парткод: | M504567 |
| Деталь: | BR-shaft |
| Парткод: | M203849 |
| Деталь: | M-BR base |
| Парткод: | M504568 |
| Деталь: | M case reinforcement L |
| Парткод: | M504572 |
| Деталь: | Take-up cover L |
| Парткод: | M504629 |
| Деталь: | Take-up cover FL |
| Парткод: | M504631 |
| Деталь: | Bar guide L |
| Парткод: | M504576 |
| Деталь: | Bar guide bracket L |
| Парткод: | M504574 |
| Деталь: | M tension bracket cover |
| Парткод: | M504578 |
| Деталь: | M tension shaft |
| Парткод: | M203966 |
| Деталь: | M tension roller |
| Парткод: | M203965 |
| Деталь: | M tension bracket |
| Парткод: | M504577 |
| Деталь: | Take-up case R |
| Парткод: | M504566 |
| Деталь: | Take-up middle shaft shoulder |
| Парткод: | M203958 |
| Деталь: | Take-up middle gear |
| Парткод: | M203959 |
| Деталь: | Middle shaft holder |
| Парткод: | M203963 |
| Деталь: | Middle big gear |
| Парткод: | M203960 |
| Деталь: | Middle shaft collar |
| Парткод: | M203962 |
| Деталь: | M case reinforcement plate R |
| Парткод: | M504571 |
| Деталь: | Take-up cover R |
| Парткод: | M504628 |
| Деталь: | M-gear base |
| Парткод: | M504569 |
| Деталь: | Take-up cover FR |
| Парткод: | M504630 |
| Деталь: | Take-up motor gear |
| Парткод: | M203968 |
| Деталь: | M motor bracket |
| Парткод: | M504570 |
| Деталь: | Take-up SW bracket |
| Парткод: | M504632 |
| Деталь: | Bar guide bracket R |
| Парткод: | M504573 |
| Деталь: | Bar guide R |
| Парткод: | M504575 |
| Деталь: | Take-up base R |
| Парткод: | M203979 |
| Деталь: | Take-up motor switch assy. |
| Парткод: | E102470 |
| Деталь: | Take-up motor cable assy. |
| Парткод: | E102469 |
| Деталь: | Slider PCB 4H assy. |
| Парткод: | E102431 |
| Деталь: | Slider PCB bracket 250S |
| Парткод: | M504505 |
| Деталь: | Slider pad spring |
| Парткод: | M800633 |
| Деталь: | Slider fulcrum shaft |
| Парткод: | M203646 |
| Деталь: | Slider pad F |
| Парткод: | M601213 |
| Деталь: | Head FPC 3 assy. |
| Парткод: | E102218 |
| Деталь: | Head FPC 2 assy. |
| Парткод: | E102217 |
| Деталь: | Head FPC 1 assy. |
| Парткод: | E102216 |
| Деталь: | Scale base L 250S |
| Парткод: | M504507 |
| Деталь: | Scale spring |
| Парткод: | M800565 |
| Деталь: | Scale hook |
| Парткод: | M503397 |
| Деталь: | Scale holder L |
| Парткод: | M503399 |
| Деталь: | Linear encoder scale 3043 |
| Парткод: | E300361 |
| Деталь: | Scale stopper |
| Парткод: | M503911 |
| Деталь: | Linear encoder PCB assy. |
| Парткод: | E102192 |
| Деталь: | Scale base R |
| Парткод: | M503910 |
| Деталь: | Scale holder R |
| Парткод: | M503398 |
| Деталь: | Bushing stopper R |
| Парткод: | M503162 |
| Деталь: | Bushing 16 |
| Парткод: | M400189 |
| Деталь: | Slider S |
| Парткод: | M400239 |
| Деталь: | Bushing stopper L |
| Парткод: | M503161 |
| Деталь: | Slider pad 250S |
| Парткод: | M203920 |
| Деталь: | Linear sensor bracket |
| Парткод: | M503909 |
| Деталь: | Head FPC 4 assy. |
| Парткод: | E102379 |
| Деталь: | Roll bracket 250 L |
| Парткод: | M504412 |
| Деталь: | Extension bushing 38 |
| Парткод: | M601190 |
| Деталь: | Roll shaft collar |
| Парткод: | M201607 |
| Деталь: | Roll base 2 (S) |
| Парткод: | M601186 |
| Деталь: | Roll holder shaft L |
| Парткод: | M203641 |
| Деталь: | Roll holder G |
| Парткод: | M600686 |
| Деталь: | Roll guide shaft 250S |
| Парткод: | M203844 |
| Деталь: | Belt screw |
| Парткод: | M400140 |
| Деталь: | Roll stopper A |
| Парткод: | M601087 |
| Деталь: | Bear holder screw |
| Парткод: | M400233 |
| Деталь: | Roll stopper B |
| Парткод: | M503927 |
| Деталь: | Roll stopper base |
| Парткод: | M503928 |
| Деталь: | Roll stopper spring 2 |
| Парткод: | M800604 |
| Деталь: | Pin guide |
| Парткод: | M601050 |
| Деталь: | Pin spring |
| Парткод: | M800564 |
| Деталь: | Height adjusting pin |
| Парткод: | M203314 |
| Деталь: | Roll lock bracket |
| Парткод: | M503929 |
| Деталь: | Roll bracket 250 R |
| Парткод: | M504493 |
| Деталь: | Roll holder shaft R |
| Парткод: | M203640 |
| Деталь: | Roll holder gear |
| Парткод: | M601168 |
| Деталь: | Roll holder |
| Парткод: | M600500 |
| Деталь: | Roll damper bracket |
| Парткод: | M503930 |
| Деталь: | Turn pape assy. |
| Парткод: | M203846 |
| Деталь: | Terminal bracket 250S |
| Парткод: | M504499 |
| Деталь: | Terminal 4 assy. |
| Парткод: | E102466 |
| Деталь: | IO PCB 250 assy. |
| Парткод: | E102423 |
| Деталь: | Dry fan relay circuit assy. |
| Парткод: | E102454 |
| Деталь: | Take-up relay circuit assy. |
| Парткод: | E102467 |
| Деталь: | Cover sensor junction cable assy |
| Парткод: | E102448 |
| Деталь: | Take-up motor junction cable assy. |
| Парткод: | E102468 |
| Деталь: | Dry fan junction cable assy. |
| Парткод: | E102456 |
| Деталь: | Dry FAN junction cable 2 assy. |
| Парткод: | E102503 |
| Деталь: | Terminal junction cable P1 assy. |
| Парткод: | E102444 |
| Деталь: | Terminal junction cable P2 assy. |
| Парткод: | E102455 |
| Деталь: | Terminal junction cable R1 assy. |
| Парткод: | E102446 |
| Деталь: | Terminal junction cable R2 assy. |
| Парткод: | E102447 |
| Деталь: | Terminal junction cable R3 assy. |
| Парткод: | E102464 |
| Деталь: | Terminal junction cable R4 assy. |
| Парткод: | E102465 |
| Деталь: | Belt screw |
| Парткод: | M400140 |
| Деталь: | Dry fan stay L |
| Парткод: | M504552 |
| Деталь: | Fan cover reinforcement plate |
| Парткод: | M504555 |
| Деталь: | Dry FAN cover R |
| Парткод: | M504554 |
| Деталь: | Dry fan stay R |
| Парткод: | M504551 |
| Деталь: | FAN cover reinforcement plate C |
| Парткод: | M504679 |
| Деталь: | Dry fan 1 assy. |
| Парткод: | E102451 |
| Деталь: | Dry fan 2 assy. |
| Парткод: | E102452 |
| Деталь: | Dry fan fork circuit assy. |
| Парткод: | E102453 |
| Деталь: | Dry FAN cover F |
| Парткод: | M504553 |
| Деталь: | Dry fan cable assy. |
| Парткод: | E102455 |
| Деталь: | Dry fan fork cable assy. |
| Парткод: | E102457 |
| Деталь: | Fuse holder 1 250 assy. |
| Парткод: | E102441 |
| Деталь: | Fuse bracket |
| Парткод: | M504145 |
| Деталь: | Fuse holder 2 250 assy. |
| Парткод: | E102442 |
| Деталь: | SSR-P 250 assy. |
| Парткод: | E102374 |
| Деталь: | SSR signal cable P assy. |
| Парткод: | E102284 |
| Деталь: | SSR signal cable R assy. |
| Парткод: | E102285 |
| Деталь: | SSR-R 250 assy. |
| Парткод: | E102375 |
| Деталь: | Terminal 3 assy. |
| Парткод: | E102430 |
| Деталь: | SSR bracket 250S |
| Парткод: | M504500 |
| Деталь: | IO2 PCB 250 assy. |
| Парткод: | E102422 |
| Деталь: | Fuse holder 3 250 assy. |
| Парткод: | E102462 |
| Деталь: | Fuse holder 4 250 assy. |
| Парткод: | E102463 |
| Деталь: | Electrical parts box reinforcement angle |
| Парткод: | M504362 |
| Деталь: | Roll support |
| Парткод: | M203842 |
| Деталь: | Roll support bracket |
| Парткод: | M504360 |
| Деталь: | Stay 250 UF |
| Парткод: | M203971 |
| Деталь: | Stand 250S |
| Парткод: | M300809 |
| Деталь: | Electrical parts box middle stay |
| Парткод: | M300801 |
| Деталь: | Stay 250 L |
| Парткод: | M300803 |
| Деталь: | Level foot base |
| Парткод: | M504674 |
| Деталь: | Leg 250 R |
| Парткод: | M300804 |
| Деталь: | Leg 250 L |
| Парткод: | M300805 |
| Деталь: | Intermediate stay spacer |
| Парткод: | M203976 |
| Деталь: | Stay UF cover |
| Парткод: | M504589 |
| Деталь: | Couple cover L |
| Парткод: | M504561 |
| Деталь: | M couple belt |
| Парткод: | M800657 |
| Деталь: | Take-up couple pulley |
| Парткод: | M203954 |
| Деталь: | Take-up couple bracket L |
| Парткод: | M504542 |
| Деталь: | Belt support 1 |
| Парткод: | M400160 |
| Деталь: | Belt screw |
| Парткод: | M400140 |
| Деталь: | Belt support S |
| Парткод: | M503786 |
| Деталь: | Belt holder |
| Парткод: | M400161 |
| Деталь: | Tension bar fix plate |
| Парткод: | M504562 |
| Деталь: | Couple shaft bracket |
| Парткод: | M504557 |
| Деталь: | Take-up sensor assy. |
| Парткод: | E102471 |
| Деталь: | Take-up sensor bracket |
| Парткод: | M504558 |
| Деталь: | Take-up couple shaft |
| Парткод: | M203953 |
| Деталь: | Take-up ccouple bracket R |
| Парткод: | M504541 |
| Деталь: | Couple cover R |
| Парткод: | M504560 |
| Деталь: | Take-up sensor plate holder |
| Парткод: | M504559 |
| Деталь: | Take-up sensor dog |
| Парткод: | M203955 |
| Деталь: | Tension bar 250 |
| Парткод: | M203957 |
| Деталь: | EW50 wiper |
| Парткод: | M700327 |
| Деталь: | Wiper holder |
| Парткод: | M601015 |
| Деталь: | Wiper holder base |
| Парткод: | M601195 |
| Деталь: | Wiper bracket |
| Парткод: | M503945 |
| Деталь: | Wiper belt hold plate |
| Парткод: | M503947 |
| Деталь: | Absorber W |
| Парткод: | M903219 |
| Деталь: | Wiper cover R |
| Парткод: | M503949 |
| Деталь: | Wiper shaft |
| Парткод: | M203642 |
| Деталь: | Wiper gear flange |
| Парткод: | M503696 |
| Деталь: | Wiper gear S |
| Парткод: | M601055 |
| Деталь: | Station motor gear |
| Парткод: | M400211 |
| Деталь: | Wiper motor assy. |
| Парткод: | E102203 |
| Деталь: | Wiper sensor assy. |
| Парткод: | E102209 |
| Деталь: | Wiper sensor bracket |
| Парткод: | M503946 |
| Деталь: | Wiper motor bracket |
| Парткод: | M503944 |
| Деталь: | Wiper adjusting plate |
| Парткод: | M504051 |
| Деталь: | S-wiper assy. |
| Парткод: | M005033 |
| Деталь: | H-platen cover R 250SP |
| Парткод: | M300820 |
| Деталь: | Thermostat bracket |
| Парткод: | M504014 |
| Деталь: | Thermostat R 250 assy. |
| Парткод: | E102373 |
| Деталь: | Wire heater R 250 R2 |
| Парткод: | E300372 |
| Деталь: | R heater hold plate R250S |
| Парткод: | M504549 |
| Деталь: | Thermistor R 250 assy. |
| Парткод: | E102377 |
| Деталь: | R-heater joint hold plate 250S |
| Парткод: | M504544 |
| Деталь: | Media plate |
| Парткод: | M504018 |
| Деталь: | PLATE SLIDER |
| Парткод: | M400234 |
| Деталь: | H-platen 250S |
| Парткод: | M300815 |
| Деталь: | Platen rubber 250S |
| Парткод: | M700332 |
| Деталь: | Head stopper 2 |
| Парткод: | M504565 |
| Деталь: | Wire heater 250 P2 |
| Парткод: | E300370 |
| Деталь: | Heater hold plate R 250S |
| Парткод: | M504545 |
| Деталь: | Thermistor P 250 assy. |
| Парткод: | E102376 |
| Деталь: | Thermostat P 250 assy. |
| Парткод: | E102372 |
| Деталь: | Heater joint hold plate 250S |
| Парткод: | M504543 |
| Деталь: | Heater hold plate F 250S |
| Парткод: | M504548 |
| Деталь: | Wire heater R 250 R1 |
| Парткод: | E300371 |
| Деталь: | Wire heater R 250 P1 |
| Парткод: | E300369 |
| Деталь: | Heater hold plate C 250S |
| Парткод: | M504546 |
| Деталь: | Heater hold plate L 250S |
| Парткод: | M504547 |
| Деталь: | Pipe cover |
| Парткод: | M504394 |
| Деталь: | Link A |
| Парткод: | M504395 |
| Деталь: | P.BR-shaft |
| Парткод: | M203853 |
| Деталь: | Pipe cover shaft |
| Парткод: | M203852 |
| Деталь: | G protection collar |
| Парткод: | M203857 |
| Деталь: | L gear |
| Парткод: | M601269 |
| Деталь: | Roll holder |
| Парткод: | M203855 |
| Деталь: | Roll guide collar |
| Парткод: | M601271 |
| Деталь: | Guide pipe |
| Парткод: | M203856 |
| Деталь: | Pipe guide cover |
| Парткод: | M504397 |
| Деталь: | Side cover |
| Парткод: | M504599 |
| Деталь: | G. bracket |
| Парткод: | M504392 |
| Деталь: | Mk-shaft |
| Парткод: | M203850 |
| Деталь: | S gear |
| Парткод: | M601268 |
| Деталь: | M gear |
| Парткод: | M203851 |
| Деталь: | M gear shaft |
| Парткод: | M203854 |
| Деталь: | G base left |
| Парткод: | M504517 |
| Деталь: | BR. bracket |
| Парткод: | M504390 |
| Деталь: | BR-shaft |
| Парткод: | M203849 |
| Деталь: | Roller support left plate |
| Парткод: | M504389 |
| Деталь: | Support base left mounting plate |
| Парткод: | M504637 |
| Деталь: | Roller support right plate |
| Парткод: | M504388 |
| Деталь: | G base |
| Парткод: | M504391 |
| Деталь: | Support base right mounting plate |
| Парткод: | M504636 |
Коды ошибок
01
02
03
04
06
07
08
09
10
11
12
20
21
23
24
30
34
40
41
42
43
46
50
51
Описание
| Error code: | 01 |
| Display: | ERROR CONDITION INVALID HEAD |
| Description: | The ERROR light flashes. |
| Causes: | The printhead was replaced with one that is not a genuine Zebra™ printhead. |
| Remedy: | Install a genuine Zebra printhead. |
| Error code: | 02 |
| Display: | ERROR CONDITION RIBBON OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
| Remedy: | Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. |
| Error code: | 03 |
| Display: | WARNING RIBBON IN |
| Description: | The ERROR light flashes. |
| Causes: | Ribbon is loaded, but the printer is set for direct thermal mode. |
| Remedy: | Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81. |
| Error code: | 04 |
| Display: | ERROR CONDITION PAPER OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded. |
| Remedy: | Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration. |
| Error code: | 06 |
| Display: | THERMISTOR FAULT |
| Description: | The ERROR light flashes. |
| Causes: | The printhead has a faulty thermistor. |
| Remedy: | Replace the printhead. |
| Error code: | 07 |
| Display: | WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD |
| Description: | The printer stops; the ERROR light is on; the printer cycles through these three messages. |
| Causes: | The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 08 |
| Display: | WARNING HEAD COLD |
| Description: | The printer prints while the ERROR light flashes. |
| Causes: | The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 09 |
| Display: | WARNING HEAD TOO HOT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is over temperature. |
| Remedy: | Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature. |
| Error code: | 10 |
| Display: | DEFRAGMENTING |
| Description: | The printer stops. |
| Causes: | The printer is defragmenting memory. |
| Remedy: | Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service. |
| Error code: | 11 |
| Display: | ERROR CONDITION CUTTER JAM |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
| Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
| Error code: | 12 |
| Description: | General print quality issues |
| Causes: | The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced. |
| Remedy: | For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance. |
| Error code: | 20 |
| Description: | Vertical image or label drift |
| Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
| Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
| Error code: | 21 |
| Description: | The bar code printed on a label does not scan. |
| Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
| Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
| Error code: | 23 |
| Description: | Auto Calibrate failed. |
| Causes: | Media or ribbon is loaded incorrectly. The sensors could not detect the media or ribbon. The sensors are dirty or positioned improperly. The sensors are dirty, or media is positioned improperly for the sensors to detect. The media type is set incorrectly. |
| Remedy: | Ensure that media and ribbon are loaded correctly. Manually calibrate the printer. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Ensure that the sensors are clean and that media is positioned properly. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. |
| Error code: | 24 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light does not flash. |
| Causes: | The communication parameters are incorrect. |
| Remedy: | Check the printer driver or software communications settings (if applicable). If you are using serial communication, check the serial port setting in the control panel menu. See Set Serial Communications on page 91. If you are using serial communication, make sure you are using a null modem cable or a null modem adapter. Using the control panel controls, check the protocol setting. It should be set to NONE. See Set Protocol on page 93. If a driver is used, check the driver communication settings for your connection. |
| Error code: | 30 |
| Description: | The LCD displays a language that I cannot read |
| Causes: | The language parameter was changed through the control panel or a firmware command. |
| Remedy: | 1. Press SETUP/EXIT to enter configuration mode. 2. Press MINUS (-). The printer displays the LANGUAGE parameter in the current language. Even if you cannot recognize the characters displayed, you can still scroll to another language. 3. Press SELECT to select the parameter. 4. Press PLUS (+) or MINUS (-) to scroll through the choices until you find a language that you can read. 5. Press SETUP/EXIT. The LCD displays SAVE CHANGES in the original language. 6. Press SETUP/EXIT again to exit configuration mode and save the changes (if the language does not change, you may need to scroll to a different save option by pressing PLUS (+) or MINUS (-) in the previous step). 7. Repeat this process, if necessary, until you reach the desired language. |
| Error code: | 34 |
| Description: | Non-continuous labels are being treated as continuous labels. |
| Causes: | The printer was not calibrated for the media being used. The printer is configured for continuous media. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. |
| Error code: | 40 |
| Display: | Scanner locked |
| Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
| Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
| Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
| Error code: | 41 |
| Display: | Self Diagnostic LSU |
| Description: | Install or Reseat Fuser, Code 41 Front thermistor open error. This is a cold condition. Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault is performed. |
| Causes: | • Fuser • Engine Control Board |
| Remedy: | 1 1. Turn OFF power and remove the Fuser Assembly. 2. Measure the resistance between the fuser connector P600-4 and P600-6. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Replace the engine control board. Go to step 3. 3 1. Turn OFF printer power. 2. Check for an open circuit or poor connection between J600-4 to J600-6 to J404A-2. 3. Is the wiring OK? Replace the engine control board. Repair or replace the wiring harness. |
| Error code: | 42 |
| Display: | Self Diagnostic Temperature |
| Description: | 10-352 ERROR 42 FUSER STS (FRONT) WARM TIME FAILURE |
| Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. The tab on the front cover may be damaged or broken 3. Check the connector and cables between Switch and main PBA. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 43 |
| Display: | Send Error (AUTH) |
| Description: | 10-353 ERROR 43 FUSER SSR1 ON TIME FAILURE |
| Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. Check the connector and cables between Switch and main PBA. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 46 |
| Display: | Send Error (SMTP) |
| Description: | 10-354 ERROR 46 FUSER STS (REAR) WARM TIME FAILURE |
| Causes: | 1. Check stability of 24V supply to LSU. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-7 and P600-9. Does the resistance measure between 20 ohms and 100 ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-3 and P404A-4 on the Engine Control Board. Does the resistance measure between 20K ohms and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 50 |
| Display: | Tray 2 Paper Empty |
| Description: | Fuser Fan Failure The Fuser Fan rotation signal indicates to the Engine Control Board that the fan is no longer operational. |
| Causes: | • Fuser Fan, PL5.3.31 • FAN/PHD/MOT Harness, PL10.1.9 • Engine Control Board, PL9.1.16 |
| Remedy: | 1 Check the Fuser Fan for damage. Remove the Front Cover. Is the fan damaged? Replace the Fuser Fan. Go to Step 2. 2 Check the Fuser Fan connection. Is P/J482 connected to the harness? Go to Step 2. Reconnect the Fan. 3 Check orientation of the Fuser Fan. Does the Fan’s label face into the chute? Go to Step 3. Correct the installation. 4 Test the Fuser Fan. Run the Service Diagnostics Fuser Fan test. Does the Fan operate. Go to Step 6. Go to Step 5. 5 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J482. 2. Check continuity between J48 <=> P483. Go to Step 5. Replace the FAN/PHD/MOT Harness. 6 Check the fan rotation signal. Print one sheet. Is there +3.3 V across P/J48-A12 <=> P/J48-A13? Replace the Engine Control Board. Replace the Fuser Fan. |
| Error code: | 51 |
| Display: | Send Error (DNS) |
| Description: | Rear Fan Failure The Rear Fan rotation signal indicates the fan is no longer operational. |
| Causes: | • Rear Fan, PL1.1.19 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16 • LV Harness, PL10.1.2 |
| Remedy: | 1 Check the Rear Fan for damage. Remove the Rear Cover. Is the fan damaged? Replace the Rear Fan. Go to Step 2. 2 Check the Rear Fan connection. Is P/J166 connected to the harness? Go to Step 3. Connect the Fan. 3 Check orientation of the Rear Fan. Does the Fan’s label face inwards? Go to Step 4. Correct the installation. 4 Test the Rear Fan. Run the Service Diagnostics Rear Fan test. Does the fan operate? Go to Step 6. Go to Step 5. 5 Check for +24 V to the fan. Disconnect P/J166. Is there +24 V across P166-1 <=> P166-3? Replace the Rear Fan. Replace the LVPS. 6 Check the fan rotation signal to the LVPS. Print one sheet. Is there +3.3 V between P/J166-1 <=> P/J166-3? Replace the Fuser Fan. Go to Step 7. 7 Check the rotation signal from the LVPS. Print one sheet. Is there +3.3 V between P/J165-15 <=> P/J165-3? Replace the LVPS. Go to Step 8. 8 Check the fan rotation signal at the Engine Control Board. Print one sheet. Is there +3.3 V between P/J61-4 <=> P/J61-16? Replace the LV Harness Replace the Engine Control Board. |
