Mimaki JV4-180
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
пьезоэлектрическая струйная
Макс. формат
A0
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Тип устройства |
Принтер |
Печать фотографий |
|
Факс |
|
Телефон |
|
Сканер |
|
Копир |
|
Макс. формат |
A0 |
Цветность печати |
цветная |
Технология печати |
пьезоэлектрическая струйная |
Тип |
струйный |
Принтер |
|
Двусторонняя печать |
|
Печать без полей |
|
Прямая печать |
|
Макс, разрешение для ч/б печати |
|
| По X | 1 440 |
| По Y | 1 440 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Печать на: |
|
| CD/DVD |
|
| Фотобумаге |
|
| Пленках |
|
| Этикетках |
|
| Конвертах |
|
| Рулоне |
|
| Матовой бумаге |
|
| Карточках |
|
| Глянцевой бумаге |
|
Факс |
|
Цветной |
|
Телефон |
|
Стандарт DECT |
|
Проводная трубка |
|
Беспроводная трубка |
|
АОН |
|
Caller ID |
|
Автоответчик |
|
Спикерфон |
|
Языки управления |
|
|
|
|
| PCL 5e |
|
| PCL 5c |
|
| PPDS |
|
| PostScript 3 |
|
| PCL 6 |
|
| PostScript 2 |
|
| PostScript |
|
Финишер |
|
Электронная сортировка |
|
Сортер |
|
Сортировка со сдвигом |
|
Степлер |
|
Брошюровщик |
|
Интерфейсы |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
USB |
|
Ethernet (RJ-45) |
|
Устройство для чтения карт памяти |
|
Веб-интерфейс |
|
RS-232 |
|
Инфракрасный порт |
|
LPT |
|
Bluetooth |
|
Поддержка ОС |
|
| Linux |
|
| DOS |
|
| Mac OS |
|
| Windows |
|
Габариты |
|
Глубина |
1 220 |
Ширина |
3 025 |
Высота |
730 |
Вес |
160 |
Модули
WASTE INK TANK ASSY.
COVER ASSY. - 1/3
FRAME ASSY. - 2/2
ELECTRICAL UNIT ASSY. - 1/2
ROLL ASSY. (JV4-130/160)
X-DRIVE ASSY.
Y-DRIVE ASSY.
KEYBOARD ASSY.
Y-BAR ASSY.
COVER ASSY. - 3/3
CARTRIDGE ASSY.
ROLL ASSY. (JV4-180)
FRAME ASSY. - 1/2
CLAMP ASSY. - 1/2
CLAMP ASSY. - 2/2
SLIDER ASSY.
TAKE-UP DEVICE ASSY.
STATION ASSY. - 1/2
STATION ASSY. - 2/2
HEAD ASSY. - 2/2
LEG ASSY.
HEAD ASSY. - 1/2
COVER ASSY. - 2/3
ELECTRICAL UNIT ASSY. - 2/2
Детали STATION ASSY. - 2/2
| Деталь: | F-station |
| Парткод: | M601080 |
| Деталь: | FS-bracket |
| Парткод: | M503460 |
| Деталь: | Tank guide R |
| Парткод: | M503840 |
| Деталь: | TUBE GUIDE |
| Парткод: | M600653 |
| Деталь: | Waste ink tank guard |
| Парткод: | M600654 |
| Деталь: | Waste ink tank 2L ASSY |
| Парткод: | M004649 |
| Деталь: | Tank guide |
| Парткод: | M503459 |
| Деталь: | Waste ink tank L |
| Парткод: | M601012 |
| Деталь: | YR-cover |
| Парткод: | M503483 |
| Деталь: | Right side plate |
| Парткод: | M503475 |
| Деталь: | Electrical unit angle |
| Парткод: | M503558 |
| Деталь: | Righr cover |
| Парткод: | M601021 |
| Деталь: | Under cover R |
| Парткод: | M503522 |
| Деталь: | SR-cover bracket 2 |
| Парткод: | M503481 |
| Деталь: | SR-cover bracket 1 |
| Парткод: | M503480 |
| Деталь: | Take-up device junction cable assy. |
| Парткод: | E102016 |
| Деталь: | SR-cover |
| Парткод: | M503479 |
| Деталь: | Cover cushion D |
| Парткод: | M700283 |
| Деталь: | Front cover D catch bracket |
| Парткод: | M503489 |
| Деталь: | SR-stay R |
| Парткод: | M503486 |
| Деталь: | SL-stay |
| Парткод: | M503487 |
| Деталь: | Maintenance cover sensor assy. |
| Парткод: | E102144 |
| Деталь: | Cover cushion U |
| Парткод: | M700282 |
| Деталь: | SR-stay L |
| Парткод: | M503485 |
| Деталь: | Y-cover angle |
| Парткод: | M503465 |
| Деталь: | Cover sensor assy. |
| Парткод: | E102143 |
| Деталь: | Front cover switch bracket |
| Парткод: | M503488 |
| Деталь: | Sub side plate R assy. |
| Парткод: | M503519 |
| Деталь: | Media guide |
| Парткод: | M503159 |
| Деталь: | Media guide shaft |
| Парткод: | M600946 |
| Деталь: | Platen rubber 130 |
| Парткод: | M700286 |
| Деталь: | Platen rubber 160 |
| Парткод: | M700287 |
| Деталь: | Platen rubber 180 |
| Парткод: | M700290 |
| Деталь: | Platen cover R 130 |
| Парткод: | M503507 |
| Деталь: | Platen cover R 160 |
| Парткод: | M503508 |
| Деталь: | Platen cover R 180 |
| Парткод: | M503616 |
| Деталь: | P-cover bracket 2 |
| Парткод: | M503521 |
| Деталь: | Platen F 130 |
| Парткод: | M300730 |
| Деталь: | Platen F 160 |
| Парткод: | M300731 |
| Деталь: | Platen F 180 |
| Парткод: | M300732 |
| Деталь: | Paper sensor assy. |
| Парткод: | E102024 |
| Деталь: | Paper sensor R bracket |
| Парткод: | M503524 |
| Деталь: | P-cover bracket |
| Парткод: | M502718 |
| Деталь: | Support assy. |
| Парткод: | M004012 |
| Деталь: | Platen cover F 130 |
| Парткод: | M503509 |
| Деталь: | Platen cover F 160 |
| Парткод: | M503510 |
| Деталь: | Platen cover F 180 |
| Парткод: | M503617 |
| Деталь: | P-cover F rubber130 |
| Парткод: | M700284 |
| Деталь: | P-cover F rubber160 |
| Парткод: | M700285 |
| Деталь: | P-cover F rubber180 |
| Парткод: | M700291 |
| Деталь: | Electrical unit bracket |
| Парткод: | M503437 |
| Деталь: | POWER SUPPLY ASSY. |
| Парткод: | E300264 |
| Деталь: | Main FPC cable 1 assy. |
| Парткод: | E102036 |
| Деталь: | Main FPC cable 2 assy. |
| Парткод: | E102045 |
| Деталь: | DC CABLE ASSY. |
| Парткод: | E102033 |
| Деталь: | FG CABLE ASSY. |
| Парткод: | E102042 |
| Деталь: | HDC-2Head PCB assy. |
| Парткод: | E102053 |
| Деталь: | Protection Plate |
| Парткод: | E300299 |
| Деталь: | HDC-4Head PCB assy. |
| Парткод: | E102052 |
| Деталь: | HDC FPC assy. |
| Парткод: | E102037 |
| Деталь: | HDC FPC 160 assy. |
| Парткод: | E102062 |
| Деталь: | HDC FPC 180 assy. |
| Парткод: | E102111 |
| Деталь: | Cooling fan motor assy. |
| Парткод: | E102020 |
| Деталь: | Roll base plate |
| Парткод: | M600906 |
| Деталь: | Pinch screw |
| Парткод: | M600056 |
| Деталь: | Roll base L |
| Парткод: | M503444 |
| Деталь: | Roll holder shaft130/160 |
| Парткод: | M203334 |
| Деталь: | Roll holder G |
| Парткод: | M600686 |
| Деталь: | Roll sub shaft |
| Парткод: | M300726 |
| Деталь: | Roll holder |
| Парткод: | M600500 |
| Деталь: | Belt screw |
| Парткод: | M400140 |
| Деталь: | Roll stopper A |
| Парткод: | M601087 |
| Деталь: | Roll stopper B2 |
| Парткод: | M503829 |
| Деталь: | Roll stopper spring 2 |
| Парткод: | M800604 |
| Деталь: | Roll base R2 |
| Парткод: | M503830 |
| Деталь: | Roll holder gear |
| Парткод: | M601168 |
| Деталь: | Roll holder shaft R 130/160 |
| Парткод: | M203498 |
| Деталь: | Roll base L assy. |
| Парткод: | M004727 |
| Деталь: | Roll base R assy. |
| Парткод: | M004728 |
| Деталь: | X-pulley bracket |
| Парткод: | M503418 |
| Деталь: | Pulley stopper |
| Парткод: | M203353 |
| Деталь: | TN15-160 pulley |
| Парткод: | M203155 |
| Деталь: | Bearing holder 1 |
| Парткод: | M400212 |
| Деталь: | Driving roller 130 L |
| Парткод: | M203456 |
| Деталь: | Driving roller 160 L |
| Парткод: | M203457 |
| Деталь: | Driving roller 180 L |
| Парткод: | M203436 |
| Деталь: | X-axis motor assy. |
| Парткод: | E300294 |
| Деталь: | TN15-20 pulley |
| Парткод: | M203154 |
| Деталь: | X-motor junction cable assy. |
| Парткод: | E102012 |
| Деталь: | X-motor junction cable 160 assy. |
| Парткод: | E102059 |
| Деталь: | X-motor junction cable 180 assy. |
| Парткод: | E102110 |
| Деталь: | XM-bracket |
| Парткод: | M503419 |
| Деталь: | Coupling L |
| Парткод: | M203310 |
| Деталь: | Driving roller A |
| Парткод: | M203307 |
| Деталь: | Driving roller B |
| Парткод: | M203308 |
| Деталь: | Driving roller 180 R |
| Парткод: | M203435 |
| Деталь: | BR shaft |
| Парткод: | M203306 |
| Деталь: | Bearing holder 2 |
| Парткод: | M400213 |
| Деталь: | X-Origin sensor assy. |
| Парткод: | E102128 |
| Деталь: | X-Origin motor total assy. |
| Парткод: | M004348 |
| Деталь: | Y-spring plate |
| Парткод: | M503406 |
| Деталь: | Y-spring |
| Парткод: | M800569 |
| Деталь: | Y-T fulcrum pin |
| Парткод: | M202842 |
| Деталь: | Y-T pulley bracket |
| Парткод: | M502878 |
| Деталь: | Y-T bracket |
| Парткод: | M502877 |
| Деталь: | Belt holderl |
| Парткод: | M400160 |
| Деталь: | D-bracket U |
| Парткод: | M502708 |
| Деталь: | Y-drive pulley |
| Парткод: | M201960 |
| Деталь: | D-pulley |
| Парткод: | M202822 |
| Деталь: | DM-pulley |
| Парткод: | M202666 |
| Деталь: | Y-axis motor assy. |
| Парткод: | E300295 |
| Деталь: | D-bracket |
| Парткод: | M503403 |
| Деталь: | YM-spacer |
| Парткод: | M202665 |
| Деталь: | YM-top plate |
| Парткод: | M502710 |
| Деталь: | Belt support plate S |
| Парткод: | M503786 |
| Деталь: | Belt screw |
| Парткод: | M400140 |
| Деталь: | Belt holder |
| Парткод: | M400161 |
| Деталь: | S3M Belt 130 |
| Парткод: | M800563 |
| Деталь: | S3M Belt 160 |
| Парткод: | M800572 |
| Деталь: | S3M Belt 180 |
| Парткод: | M800591 |
| Деталь: | Y-driven pulley |
| Парткод: | M201966 |
| Деталь: | Y-T pulley shaft |
| Парткод: | M202841 |
| Деталь: | Y-driven pulley assy. |
| Парткод: | M002732 |
| Деталь: | Y-drive pulley assy. |
| Парткод: | M004363 |
| Деталь: | Y-drive motor total assy. |
| Парткод: | M004725 |
| Деталь: | Keyboard seat |
| Парткод: | M902731 |
| Деталь: | LCD COVER |
| Парткод: | M600520 |
| Деталь: | Keyboard panel |
| Парткод: | M601023 |
| Деталь: | KEY TOP |
| Парткод: | M601024 |
| Деталь: | Keyboard PCB assy. |
| Парткод: | E102058 |
| Деталь: | Ink sensor PCB assy. |
| Парткод: | E101910 |
| Деталь: | Keyboard cable assy. |
| Парткод: | E102032 |
| Деталь: | Keyboard base |
| Парткод: | M503500 |
| Деталь: | IO PCB assy. |
| Парткод: | E102056 |
| Деталь: | KB panel assy. |
| Парткод: | M004393 |
| Деталь: | Bear guide-film 130 |
| Парткод: | M902668 |
| Деталь: | Bear guide-film 160 |
| Парткод: | M902676 |
| Деталь: | Bear guide-film 180 |
| Парткод: | M902794 |
| Деталь: | Bear base |
| Парткод: | M503417 |
| Деталь: | Belt screw |
| Парткод: | M400140 |
| Деталь: | Bear holder |
| Парткод: | M503596 |
| Деталь: | Bear guide 130 |
| Парткод: | M503391 |
| Деталь: | Bear guide 160 |
| Парткод: | M503416 |
| Деталь: | Bear guide 180 |
| Парткод: | M503598 |
| Деталь: | FPC holder |
| Парткод: | M503388 |
| Деталь: | FPC clamp bracket |
| Парткод: | M503387 |
| Деталь: | Bear guide stay |
| Парткод: | M503458 |
| Деталь: | Y-bar 130 |
| Парткод: | M300717 |
| Деталь: | Y-bar 160 |
| Парткод: | M300723 |
| Деталь: | Y-bar 180 |
| Парткод: | M300754 |
| Деталь: | LM guide 130 |
| Парткод: | M800490 |
| Деталь: | LM guide 160 |
| Парткод: | M800571 |
| Деталь: | LM guide 180 |
| Парткод: | M800590 |
| Деталь: | Scale holder |
| Парткод: | M601077 |
| Деталь: | YL-cover 130 |
| Парткод: | M503484 |
| Деталь: | YL-cover 160/180 |
| Парткод: | M503493 |
| Деталь: | SL stay |
| Парткод: | M503487 |
| Деталь: | LEFT SIDE PLATE |
| Парткод: | M503474 |
| Деталь: | Y-cover angle |
| Парткод: | M503465 |
| Деталь: | Front cover D catch bracket |
| Парткод: | M503489 |
| Деталь: | Cover cushion D |
| Парткод: | M700283 |
| Деталь: | Cover cushion U |
| Парткод: | M700282 |
| Деталь: | Sub side plate L |
| Парткод: | M503466 |
| Деталь: | Ink sensor PCB assy. |
| Парткод: | E101910 |
| Деталь: | Under cover L |
| Парткод: | M503523 |
| Деталь: | Under cover L 160/180 |
| Парткод: | M503559 |
| Деталь: | SL-cover 130 |
| Парткод: | M503482 |
| Деталь: | SL-cover 160/180 |
| Парткод: | M503492 |
| Деталь: | LEFT COVER |
| Парткод: | M601022 |
| Деталь: | Cartridge cover L 130 |
| Парткод: | M503426 |
| Деталь: | Cartridge cover L 160/180 |
| Парткод: | M503427 |
| Деталь: | Cartridge rear cover L 130 |
| Парткод: | M503429 |
| Деталь: | Cartridge rear cover L 160/180 |
| Парткод: | M503430 |
| Деталь: | Guide KCM |
| Парткод: | M503431 |
| Деталь: | Guide YGO |
| Парткод: | M503432 |
| Деталь: | Tube cover 130 |
| Парткод: | M503532 |
| Деталь: | Tube cover 160/180 |
| Парткод: | M503533 |
| Деталь: | Cartridge cover R |
| Парткод: | M503425 |
| Деталь: | Cartridge rear cover R |
| Парткод: | M503428 |
| Деталь: | Cartridge base R |
| Парткод: | M600595 |
| Деталь: | Plate spring (C) |
| Парткод: | M502166 |
| Деталь: | Cartridge base bracket R |
| Парткод: | M503422 |
| Деталь: | Cartridge base bracket L 130 |
| Парткод: | M503423 |
| Деталь: | Cartridge base bracket L 160/180 |
| Парткод: | M503424 |
| Деталь: | Cartridge guide 2 |
| Парткод: | M600593 |
| Деталь: | Cartridge guide 1 |
| Парткод: | M600592 |
| Деталь: | Cartridge frame assy. |
| Парткод: | M004275 |
| Деталь: | Cartridge guide assy. |
| Парткод: | M004730 |
| Деталь: | Roll bracket |
| Парткод: | M503442 |
| Деталь: | Roll holder shaft 180 |
| Парткод: | M203335 |
| Деталь: | Roll holder G |
| Парткод: | M600686 |
| Деталь: | Extension long bushing (180) |
| Парткод: | M202507 |
| Деталь: | Roll base180 |
| Парткод: | M203337 |
| Деталь: | Sub roll shaft stay |
| Парткод: | M503445 |
| Деталь: | Main roll shaft 180 |
| Парткод: | M203343 |
| Деталь: | Sub roll shaft 180 |
| Парткод: | M300728 |
| Деталь: | Roll guide collar |
| Парткод: | M203338 |
| Деталь: | Frame 130 |
| Парткод: | M300739 |
| Деталь: | Frame 160 |
| Парткод: | M300740 |
| Деталь: | Frame 180 |
| Парткод: | M300764 |
| Деталь: | Y-bar bracket |
| Парткод: | M400157 |
| Деталь: | Absorption Pad |
| Парткод: | M700288 |
| Деталь: | Absorber S-S |
| Парткод: | M902740 |
| Деталь: | Under frame 130 |
| Парткод: | M503501 |
| Деталь: | Under frame 160 |
| Парткод: | M503512 |
| Деталь: | Under frame 180 |
| Парткод: | M503518 |
| Деталь: | Fan motor bracket |
| Парткод: | M503513 |
| Деталь: | Fan motor 1 assy. |
| Парткод: | E102017 |
| Деталь: | Fan motor 2 assy. |
| Парткод: | E102018 |
| Деталь: | Fan motor 3 assy. |
| Парткод: | E102019 |
| Деталь: | Fan motor 3 160 assy. |
| Парткод: | E102060 |
| Деталь: | Absorption Pad |
| Парткод: | M700305 |
| Деталь: | Fan motor 4 180assy. |
| Парткод: | E102144 |
| Деталь: | Clamp bushing |
| Парткод: | M600694 |
| Деталь: | Clamp end bracket |
| Парткод: | M503514 |
| Деталь: | CL B assy. |
| Парткод: | M503515 |
| Деталь: | Roll stopper C |
| Парткод: | M601088 |
| Деталь: | Lever G |
| Парткод: | M601090 |
| Деталь: | Clamp link |
| Парткод: | M503516 |
| Деталь: | Lever assy. |
| Парткод: | M503518 |
| Деталь: | Clamp lever |
| Парткод: | M601066 |
| Деталь: | Clamp sensor assy. |
| Парткод: | E102026 |
| Деталь: | Clamp sensor bracket |
| Парткод: | M503520 |
| Деталь: | Clamp shaft 130 |
| Парткод: | M203347 |
| Деталь: | Clamp shaft 160 |
| Парткод: | M203348 |
| Деталь: | Clamp shaft 180 |
| Парткод: | M203432 |
| Деталь: | Clamp guard |
| Парткод: | M601119 |
| Деталь: | P-holder |
| Парткод: | M503421 |
| Деталь: | Clamp bushing |
| Парткод: | M600694 |
| Деталь: | Main cam |
| Парткод: | M600663 |
| Деталь: | Clamp spring |
| Парткод: | M800576 |
| Деталь: | PR-base R |
| Парткод: | M503383 |
| Деталь: | PINCH ROLLER |
| Парткод: | M600995 |
| Деталь: | PR-shaft |
| Парткод: | M202720 |
| Деталь: | PR-base F |
| Парткод: | M400181 |
| Деталь: | P-holder shaft |
| Парткод: | M203304 |
| Деталь: | PR assy. |
| Парткод: | M004726 |
| Деталь: | FPC cover |
| Парткод: | M503464 |
| Деталь: | FPC guide plate |
| Парткод: | M503389 |
| Деталь: | TUBE GUIDE |
| Парткод: | M503412 |
| Деталь: | Origin sensor assy. |
| Парткод: | E102025 |
| Деталь: | Slider stopper R |
| Парткод: | M503503 |
| Деталь: | Scale holder R |
| Парткод: | M503398 |
| Деталь: | Linear encoder scale assy. |
| Парткод: | E300245 |
| Деталь: | Linear encoder scale 160 assy. |
| Парткод: | E300289 |
| Деталь: | Linear encoder scale 180 assy. |
| Парткод: | E102115 |
| Деталь: | Linear encoder PCB assy. |
| Парткод: | E102044 |
| Деталь: | L sensor bracket |
| Парткод: | M503404 |
| Деталь: | SLIDER |
| Парткод: | M400214 |
| Деталь: | SHAFT HOLDER |
| Парткод: | M203319 |
| Деталь: | HEAD BASE |
| Парткод: | M400209 |
| Деталь: | H-axis hold shaft |
| Парткод: | M203317 |
| Деталь: | Scale hook |
| Парткод: | M503397 |
| Деталь: | Scale spring |
| Парткод: | M800565 |
| Деталь: | Slider stopper L |
| Парткод: | M503504 |
| Деталь: | Scale holder L |
| Парткод: | M503399 |
| Деталь: | Slider PCB bracket |
| Парткод: | M503390 |
| Деталь: | Slider PCB assy. |
| Парткод: | E102054 |
| Деталь: | Head FPC 6 assy. |
| Парткод: | E102050 |
| Деталь: | Head FPC 5 assy. |
| Парткод: | E102049 |
| Деталь: | Head FPC 4 assy. |
| Парткод: | E102048 |
| Деталь: | Head FPC 3 assy. |
| Парткод: | E102047 |
| Деталь: | Head FPC 2 assy. |
| Парткод: | E102046 |
| Деталь: | Head FPC 1 assy. |
| Парткод: | E102038 |
| Деталь: | Roll bracket |
| Парткод: | M503442 |
| Деталь: | Sub roll shaft 130 |
| Парткод: | M300726 |
| Деталь: | Sub roll shaft 160 |
| Парткод: | M300727 |
| Деталь: | Sub roll shaft 180 |
| Парткод: | M300728 |
| Деталь: | Roll base M |
| Парткод: | M600509 |
| Деталь: | HOLDER SHAFT |
| Парткод: | M202118 |
| Деталь: | Roll holder |
| Парткод: | M600500 |
| Деталь: | Sub roll shaft stay |
| Парткод: | M503445 |
| Деталь: | Extension bushing |
| Парткод: | M600541 |
| Деталь: | Extension long bushing |
| Парткод: | M600540 |
| Деталь: | Main wind-up shaft 130 |
| Парткод: | M203339 |
| Деталь: | Main wind-up shaft 160 |
| Парткод: | M203340 |
| Деталь: | Main wind-up shaft 180 |
| Парткод: | M203341 |
| Деталь: | TL shaft (180) |
| Парткод: | M202502 |
| Деталь: | Wind-up cover |
| Парткод: | M601026 |
| Деталь: | TL bracket |
| Парткод: | M503529 |
| Деталь: | TL gear (180) |
| Парткод: | M400202 |
| Деталь: | Take-up motor cable assy. |
| Парткод: | E102129 |
| Деталь: | Take-up motor PCB assy. |
| Парткод: | E101185 |
| Деталь: | M gear (A) (180) |
| Парткод: | M202782 |
| Деталь: | Take-up motor bracket |
| Парткод: | M503530 |
| Деталь: | Take-up motor switch assy. |
| Парткод: | E101209 |
| Деталь: | Take-up motor assy. |
| Парткод: | E101604 |
| Деталь: | Take-up right assy. |
| Парткод: | M004403 |
| Деталь: | Station shaft assy. |
| Парткод: | M003973 |
| Деталь: | Absorber S-L |
| Парткод: | M902741 |
| Деталь: | Station cam |
| Парткод: | M601047 |
| Деталь: | Station motor assy. |
| Парткод: | E102142 |
| Деталь: | Station motor gear |
| Парткод: | M400211 |
| Деталь: | Station gear 2 |
| Парткод: | M601046 |
| Деталь: | Station gear 1 |
| Парткод: | M601045 |
| Деталь: | CAM SHAFT |
| Парткод: | M300729 |
| Деталь: | Bottom point sensor assy. |
| Парткод: | E102028 |
| Деталь: | D-point sensor bracket |
| Парткод: | M503453 |
| Деталь: | Pump motor 1 assy. |
| Парткод: | E102137 |
| Деталь: | Pump motor 2 assy. |
| Парткод: | E102138 |
| Деталь: | Pump motor 3 assy. |
| Парткод: | E102139 |
| Деталь: | Pump motor 4 assy. |
| Парткод: | E102140 |
| Деталь: | Pump-middle gear |
| Парткод: | M601044 |
| Деталь: | Pump motor gear |
| Парткод: | M400210 |
| Деталь: | Pump motor bracket |
| Парткод: | M003971 |
| Деталь: | Pump bracket |
| Парткод: | M503446 |
| Деталь: | Station base |
| Парткод: | M003972 |
| Деталь: | Wiper holder |
| Парткод: | M601015 |
| Деталь: | Wiper holder base |
| Парткод: | M601019 |
| Деталь: | Wiper belt holder |
| Парткод: | M503456 |
| Деталь: | Wiper gear S |
| Парткод: | M601055 |
| Деталь: | ABSORBER |
| Парткод: | M902739 |
| Деталь: | Wiper ink guard |
| Парткод: | M503531 |
| Деталь: | Wiper shaft S |
| Парткод: | M203344 |
| Деталь: | Wiper bracket S |
| Парткод: | M003974 |
| Деталь: | Wiper sensor bracket |
| Парткод: | M503454 |
| Деталь: | Wiper sensor assy. |
| Парткод: | E102029 |
| Деталь: | Cap housing U |
| Парткод: | M600999 |
| Деталь: | CAP SPRING |
| Парткод: | M800573 |
| Деталь: | Cap housing D |
| Парткод: | M601000 |
| Деталь: | Cap sensor plate |
| Парткод: | M503450 |
| Деталь: | Cam bridge |
| Парткод: | M503449 |
| Деталь: | Station spring |
| Парткод: | M800575 |
| Деталь: | Cap frame |
| Парткод: | M503448 |
| Деталь: | Station guide |
| Парткод: | M601052 |
| Деталь: | Wiper motor bracket S |
| Парткод: | M503455 |
| Деталь: | Station motor gear |
| Парткод: | M400211 |
| Деталь: | Wiper motor assy. |
| Парткод: | E102141 |
| Деталь: | Cleaning wiper kit |
| Парткод: | SPA-0105 |
| Деталь: | Cap housing assy. |
| Парткод: | M004359 |
| Деталь: | Damper holder |
| Парткод: | M601129 |
| Деталь: | Print head cover |
| Парткод: | M600998 |
| Деталь: | Print head assy. |
| Парткод: | M004372 |
| Деталь: | Head guide shaft |
| Парткод: | M203315 |
| Деталь: | Head bracket |
| Парткод: | M400207 |
| Деталь: | Angle spring |
| Парткод: | M800570 |
| Деталь: | Head adjusting screw |
| Парткод: | M400208 |
| Деталь: | Adjusting Spring |
| Парткод: | M800566 |
| Деталь: | ADJUSTER |
| Парткод: | M601048 |
| Деталь: | Head slider |
| Парткод: | M400203 |
| Деталь: | Stand top R |
| Парткод: | M503526 |
| Деталь: | Stand foot |
| Парткод: | M300733 |
| Деталь: | Right stand assy. |
| Парткод: | M004194 |
| Деталь: | Left stand assy. |
| Парткод: | M004195 |
| Деталь: | Stand top L |
| Парткод: | M503527 |
| Деталь: | Stay 130 |
| Парткод: | M300735 |
| Деталь: | Stay 160 |
| Парткод: | M300736 |
| Деталь: | Stay 180 |
| Парткод: | M300737 |
| Деталь: | Head H shaft |
| Парткод: | M203316 |
| Деталь: | H-adjuster |
| Парткод: | M601049 |
| Деталь: | H-adjust spring |
| Парткод: | M800567 |
| Деталь: | Head UD bracket |
| Парткод: | M503402 |
| Деталь: | Head cover bracket |
| Парткод: | M503463 |
| Деталь: | Cutter cover |
| Парткод: | M503462 |
| Деталь: | Cutter unit base |
| Парткод: | M503392 |
| Деталь: | Cap sensor assy. |
| Парткод: | E102027 |
| Деталь: | Paper width sensor assy. |
| Парткод: | E102023 |
| Деталь: | Cutter bracket |
| Парткод: | M503393 |
| Деталь: | CUTTER HOLDER |
| Парткод: | M601053 |
| Деталь: | Cutter actuator assy. |
| Парткод: | E102022 |
| Деталь: | Cutter L |
| Парткод: | M201535 |
| Деталь: | Cutter roller |
| Парткод: | M601085 |
| Деталь: | Cutter screw |
| Парткод: | M400219 |
| Деталь: | CUTTER HOLDER |
| Парткод: | M601086 |
| Деталь: | Cutter shaft |
| Парткод: | M203322 |
| Деталь: | Pin spring |
| Парткод: | M800564 |
| Деталь: | Pin guide |
| Парткод: | M601050 |
| Деталь: | Height adjusting pin |
| Парткод: | M203314 |
| Деталь: | HEAD COVER |
| Парткод: | M503467 |
| Деталь: | H-axis fixing shaft |
| Парткод: | M203318 |
| Деталь: | H-axis stopper |
| Парткод: | M601051 |
| Деталь: | Cutter assy. |
| Парткод: | SPA-0107 |
| Деталь: | Rear cover L 130 |
| Парткод: | M503476 |
| Деталь: | Rear cover L 160 |
| Парткод: | M503477 |
| Деталь: | Rear cover L 180 |
| Парткод: | M503599 |
| Деталь: | Rear cover R 130 |
| Парткод: | M503556 |
| Деталь: | Rear cover R 160 |
| Парткод: | M503557 |
| Деталь: | Rear cover R 180 |
| Парткод: | M503600 |
| Деталь: | Y-cover 130 |
| Парткод: | M503468 |
| Деталь: | Y-cover 160 |
| Парткод: | M503469 |
| Деталь: | Y-cover 180 |
| Парткод: | M503470 |
| Деталь: | Stay support |
| Парткод: | M503461 |
| Деталь: | Y-cover stay 130 |
| Парткод: | M503471 |
| Деталь: | Y-cover stay 160 |
| Парткод: | M503472 |
| Деталь: | Y-cover stay 180 |
| Парткод: | M503473 |
| Деталь: | Front cover U 130 |
| Парткод: | M503491 |
| Деталь: | Front cover U 160 |
| Парткод: | M503494 |
| Деталь: | Front cover U 180 |
| Парткод: | M503495 |
| Деталь: | Fulcrum pin |
| Парткод: | M201625 |
| Деталь: | Pin bracket |
| Парткод: | M501584 |
| Деталь: | Front cover nut 130 |
| Парткод: | M503497 |
| Деталь: | Front cover nut 160 |
| Парткод: | M503498 |
| Деталь: | Front cover nut 180 |
| Парткод: | M503499 |
| Деталь: | Front cover switch washer |
| Парткод: | M503490 |
| Деталь: | Front cover nut C |
| Парткод: | M503496 |
| Деталь: | Front cover D 130 |
| Парткод: | M601081 |
| Деталь: | Front cover D 160 |
| Парткод: | M601082 |
| Деталь: | Front cover D 180 |
| Парткод: | M601083 |
| Деталь: | Cover spring |
| Парткод: | M800095 |
| Деталь: | Front cover assy. 130 |
| Парткод: | M004721 |
| Деталь: | Front cover assy. 160 |
| Парткод: | M004722 |
| Деталь: | Front cover assy. 180 |
| Парткод: | M004723 |
| Деталь: | INK FPC 1 160 assy. |
| Парткод: | E102063 |
| Деталь: | INK FPC 1 180 assy. |
| Парткод: | E102112 |
| Деталь: | Electrical unit cover |
| Парткод: | M503439 |
| Деталь: | I/Fconnection board assy. |
| Парткод: | E102154 |
| Деталь: | 1394 PCB assy. |
| Парткод: | E102161 |
| Деталь: | Inlet cover |
| Парткод: | M503441 |
| Деталь: | I/F bracket |
| Парткод: | M503438 |
| Деталь: | INLET ASSY. |
| Парткод: | E102041 |
| Деталь: | AC CABLE ASSY. |
| Парткод: | E102034 |
| Деталь: | Main PCB bracket |
| Парткод: | M503440 |
| Деталь: | Main PCB assy. |
| Парткод: | E102051 |
| Деталь: | INK FPC 1 assy. |
| Парткод: | E102039 |
| Деталь: | INK FPC 2 assy. |
| Парткод: | E102040 |
| Деталь: | IO cable assy. |
| Парткод: | E102035 |
Коды ошибок
01
02
03
04
06
07
08
09
10
11
12
20
21
23
24
30
34
40
41
42
43
45
46
50
51
Описание
| Error code: | 01 |
| Display: | ERROR CONDITION INVALID HEAD |
| Description: | The ERROR light flashes. |
| Causes: | The printhead was replaced with one that is not a genuine Zebra™ printhead. |
| Remedy: | Install a genuine Zebra printhead. |
| Error code: | 02 |
| Display: | ERROR CONDITION RIBBON OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
| Remedy: | Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. |
| Error code: | 03 |
| Display: | WARNING RIBBON IN |
| Description: | The ERROR light flashes. |
| Causes: | Ribbon is loaded, but the printer is set for direct thermal mode. |
| Remedy: | Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81. |
| Error code: | 04 |
| Display: | ERROR CONDITION PAPER OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded. |
| Remedy: | Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration. |
| Error code: | 06 |
| Display: | THERMISTOR FAULT |
| Description: | The ERROR light flashes. |
| Causes: | The printhead has a faulty thermistor. |
| Remedy: | Replace the printhead. |
| Error code: | 07 |
| Display: | WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD |
| Description: | The printer stops; the ERROR light is on; the printer cycles through these three messages. |
| Causes: | The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 08 |
| Display: | WARNING HEAD COLD |
| Description: | The printer prints while the ERROR light flashes. |
| Causes: | The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 09 |
| Display: | WARNING HEAD TOO HOT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is over temperature. |
| Remedy: | Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature. |
| Error code: | 10 |
| Display: | DEFRAGMENTING |
| Description: | The printer stops. |
| Causes: | The printer is defragmenting memory. |
| Remedy: | Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service. |
| Error code: | 11 |
| Display: | ERROR CONDITION CUTTER JAM |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
| Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
| Error code: | 12 |
| Description: | General print quality issues |
| Causes: | The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced. |
| Remedy: | For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance. |
| Error code: | 20 |
| Description: | Vertical image or label drift |
| Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
| Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
| Error code: | 21 |
| Description: | The bar code printed on a label does not scan. |
| Causes: | The bar code is not within specifications because the print is too light or too dark. Not enough blank space around the bar code. |
| Remedy: | Perform the FEED Self Test on page 120. Adjust the darkness or print speed settings as necessary. Leave at least 1/8 in. (3.2 mm) between the bar code and other printed areas on the label and between the bar code and the edge of the label. |
| Error code: | 23 |
| Description: | Auto Calibrate failed. |
| Causes: | Media or ribbon is loaded incorrectly. The sensors could not detect the media or ribbon. The sensors are dirty or positioned improperly. The sensors are dirty, or media is positioned improperly for the sensors to detect. The media type is set incorrectly. |
| Remedy: | Ensure that media and ribbon are loaded correctly. Manually calibrate the printer. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Ensure that the sensors are clean and that media is positioned properly. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. |
| Error code: | 24 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light does not flash. |
| Causes: | The communication parameters are incorrect. |
| Remedy: | Check the printer driver or software communications settings (if applicable). If you are using serial communication, check the serial port setting in the control panel menu. See Set Serial Communications on page 91. If you are using serial communication, make sure you are using a null modem cable or a null modem adapter. Using the control panel controls, check the protocol setting. It should be set to NONE. See Set Protocol on page 93. If a driver is used, check the driver communication settings for your connection. |
| Error code: | 30 |
| Description: | The LCD displays a language that I cannot read |
| Causes: | The language parameter was changed through the control panel or a firmware command. |
| Remedy: | 1. Press SETUP/EXIT to enter configuration mode. 2. Press MINUS (-). The printer displays the LANGUAGE parameter in the current language. Even if you cannot recognize the characters displayed, you can still scroll to another language. 3. Press SELECT to select the parameter. 4. Press PLUS (+) or MINUS (-) to scroll through the choices until you find a language that you can read. 5. Press SETUP/EXIT. The LCD displays SAVE CHANGES in the original language. 6. Press SETUP/EXIT again to exit configuration mode and save the changes (if the language does not change, you may need to scroll to a different save option by pressing PLUS (+) or MINUS (-) in the previous step). 7. Repeat this process, if necessary, until you reach the desired language. |
| Error code: | 34 |
| Description: | Non-continuous labels are being treated as continuous labels. |
| Causes: | The printer was not calibrated for the media being used. The printer is configured for continuous media. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. |
| Error code: | 40 |
| Display: | Scanner locked |
| Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
| Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
| Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
| Error code: | 41 |
| Display: | Self Diagnostic LSU |
| Description: | Install or Reseat Fuser, Code 41 Front thermistor open error. This is a cold condition. Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault is performed. |
| Causes: | • Fuser • Engine Control Board |
| Remedy: | 1 1. Turn OFF power and remove the Fuser Assembly. 2. Measure the resistance between the fuser connector P600-4 and P600-6. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Replace the engine control board. Go to step 3. 3 1. Turn OFF printer power. 2. Check for an open circuit or poor connection between J600-4 to J600-6 to J404A-2. 3. Is the wiring OK? Replace the engine control board. Repair or replace the wiring harness. |
| Error code: | 42 |
| Display: | Self Diagnostic Temperature |
| Description: | 10-352 ERROR 42 FUSER STS (FRONT) WARM TIME FAILURE |
| Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. The tab on the front cover may be damaged or broken 3. Check the connector and cables between Switch and main PBA. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 43 |
| Display: | Send Error (AUTH) |
| Description: | 10-353 ERROR 43 FUSER SSR1 ON TIME FAILURE |
| Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. Check the connector and cables between Switch and main PBA. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 45 |
| Display: | Send Error (POP3) |
| Description: | Fuser STS (Rear) Failure, Code 45 Rear Thermistor open error. The machine logic detected an open circuit in the rear thermistor. |
| Causes: | • Fuser • Engine Control Board |
| Remedy: | 1 1. Turn OFF power, remove the fuser assembly and allow it to cool down. 2. Measure the resistance between the Fuser connector P600-7 and P600-9. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Replace the engine control board. Go to step 3. 3 1. Turn printer power OFF. 2. Check for an open circuit or poor connection between J641-4 and J641-5. 3. Is the wiring harness OK? Replace the engine control board. Repair or replace the wiring harness. |
| Error code: | 46 |
| Display: | Send Error (SMTP) |
| Description: | 10-354 ERROR 46 FUSER STS (REAR) WARM TIME FAILURE |
| Causes: | 1. Check stability of 24V supply to LSU. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-7 and P600-9. Does the resistance measure between 20 ohms and 100 ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-3 and P404A-4 on the Engine Control Board. Does the resistance measure between 20K ohms and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 50 |
| Display: | Tray 2 Paper Empty |
| Description: | Fuser Fan Failure The Fuser Fan rotation signal indicates to the Engine Control Board that the fan is no longer operational. |
| Causes: | • Fuser Fan, PL5.3.31 • FAN/PHD/MOT Harness, PL10.1.9 • Engine Control Board, PL9.1.16 |
| Remedy: | 1 Check the Fuser Fan for damage. Remove the Front Cover. Is the fan damaged? Replace the Fuser Fan. Go to Step 2. 2 Check the Fuser Fan connection. Is P/J482 connected to the harness? Go to Step 2. Reconnect the Fan. 3 Check orientation of the Fuser Fan. Does the Fan’s label face into the chute? Go to Step 3. Correct the installation. 4 Test the Fuser Fan. Run the Service Diagnostics Fuser Fan test. Does the Fan operate. Go to Step 6. Go to Step 5. 5 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J482. 2. Check continuity between J48 <=> P483. Go to Step 5. Replace the FAN/PHD/MOT Harness. 6 Check the fan rotation signal. Print one sheet. Is there +3.3 V across P/J48-A12 <=> P/J48-A13? Replace the Engine Control Board. Replace the Fuser Fan. |
| Error code: | 51 |
| Display: | Send Error (DNS) |
| Description: | Rear Fan Failure The Rear Fan rotation signal indicates the fan is no longer operational. |
| Causes: | • Rear Fan, PL1.1.19 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16 • LV Harness, PL10.1.2 |
| Remedy: | 1 Check the Rear Fan for damage. Remove the Rear Cover. Is the fan damaged? Replace the Rear Fan. Go to Step 2. 2 Check the Rear Fan connection. Is P/J166 connected to the harness? Go to Step 3. Connect the Fan. 3 Check orientation of the Rear Fan. Does the Fan’s label face inwards? Go to Step 4. Correct the installation. 4 Test the Rear Fan. Run the Service Diagnostics Rear Fan test. Does the fan operate? Go to Step 6. Go to Step 5. 5 Check for +24 V to the fan. Disconnect P/J166. Is there +24 V across P166-1 <=> P166-3? Replace the Rear Fan. Replace the LVPS. 6 Check the fan rotation signal to the LVPS. Print one sheet. Is there +3.3 V between P/J166-1 <=> P/J166-3? Replace the Fuser Fan. Go to Step 7. 7 Check the rotation signal from the LVPS. Print one sheet. Is there +3.3 V between P/J165-15 <=> P/J165-3? Replace the LVPS. Go to Step 8. 8 Check the fan rotation signal at the Engine Control Board. Print one sheet. Is there +3.3 V between P/J61-4 <=> P/J61-16? Replace the LV Harness Replace the Engine Control Board. |
