Mimaki UJF-605CII
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
пьезоэлектрическая струйная
Макс. формат
A1
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Макс. формат |
A1 |
Размещение |
напольный |
Тип |
струйный |
Печать фотографий |
|
Технология печати |
пьезоэлектрическая струйная |
Тип устройства |
Принтер |
Цветность печати |
цветная |
Копир |
|
Телефон |
|
Факс |
|
Сканер |
|
Принтер |
|
Количество цветов |
7 |
Прямая печать |
|
Двусторонняя печать |
|
Макс, разрешение для ч/б печати |
|
| По X | 600 |
| По Y | 600 |
| По X | 1 200 |
Макс, разрешение для цветной печати |
|
| По Y | 2 400 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Печать на: |
|
| CD/DVD |
|
| Глянцевой бумаге |
|
| Матовой бумаге |
|
| Фотобумаге |
|
| Пленках |
|
| Карточках |
|
Факс |
|
Цветной |
|
Телефон |
|
Спикерфон |
|
Стандарт DECT |
|
Caller ID |
|
АОН |
|
Беспроводная трубка |
|
Проводная трубка |
|
Автоответчик |
|
Языки управления |
|
| PostScript |
|
Финишер |
|
Сортер |
|
Электронная сортировка |
|
Брошюровщик |
|
Степлер |
|
Сортировка со сдвигом |
|
Интерфейсы |
|
LPT |
|
FireWire (IEEE 1394) |
|
Веб-интерфейс |
|
RS-232 |
|
Bluetooth |
|
Инфракрасный порт |
|
USB |
|
Wi-Fi |
|
Ethernet (RJ-45) |
|
Устройство для чтения карт памяти |
|
Дополнительная информация |
|
Экран |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
| Windows |
|
| DOS |
|
Потребляемая мощность |
|
| При работе | 4 000 |
Габариты |
|
Вес |
420 |
Высота |
1 370 |
Глубина |
1 570 |
Ширина |
2 440 |
Модули
UV, CABLE BEAR ASSY
LEG ASSY. -1/2
STATION Assy -2/3
HEAD UNIT ASSY -1/2
COVER ASSY. -3/4
STATION ASSY -1/3
Y BAR ASSY.
WARM WATER BASE Assy -2/3
ELECTRICAL UNIT Assy -3/3
Y DRIVE ASSY
LEG Assy. -2/2
WASTE INK TANK ASSY
PUMP ASSY
COVER ASSY. -1/4
COVER ASSY. -2/4
HEAD UNIT Assy -2/2
WARM WATER BASE ASSY -1/3
SLIDER ASSY
ELECTRICAL UNIT Assy -2/3
AREA SENSOR ASSY
ELECTRICAL UNIT ASSY -1/3
X TABLE ASSY. -1/4
CARTRIDGE FRAME ASSY
COVER ASSY. -4/4
TABLE Assy. -4/4
X TABLE Assy. -3/4
X TABLE Assy. -2/4
WARM WATER BASE Assy -3/3
STATION Assy -3/3
Детали CARTRIDGE FRAME ASSY
| Деталь: | Fan BKT |
| Парткод: | M505098 |
| Деталь: | DC FAN ASSY |
| Парткод: | MP-E104009 |
| Деталь: | Center cover BKT FC |
| Парткод: | M505099 |
| Деталь: | Runner flex E2 mini B15 type |
| Парткод: | B15i-038-075-0-40-1038.12PZ |
| Деталь: | Runner flex E2 mini B15 type |
| Парткод: | B151-5-075-0-34-105.12P |
| Деталь: | UV control cable assy |
| Парткод: | E300481 |
| Деталь: | UV slider dog |
| Парткод: | M505055 |
| Деталь: | UV slider F-C |
| Парткод: | M509077 |
| Деталь: | UV lighting unit |
| Парткод: | MP-1P085C-SDM5 |
| Деталь: | UV lamp holder F |
| Парткод: | M507006 |
| Деталь: | UV lamp |
| Парткод: | SPC-0379 |
| Деталь: | UJF right cool fan connection cable assy |
| Парткод: | E104030 |
| Деталь: | UJF center cool fan connection cable assy |
| Парткод: | E104029 |
| Деталь: | UV lamp cable assy |
| Парткод: | E300480 |
| Деталь: | Caution label-UV voltage |
| Парткод: | M903764 |
| Деталь: | UV heat attention name plate |
| Парткод: | M903763 |
| Деталь: | Left rear cover FC |
| Парткод: | M505182 |
| Деталь: | Cartridge cover FC |
| Парткод: | M505100 |
| Деталь: | Cartridge hold plate |
| Парткод: | M505329 |
| Деталь: | Right rear cover FC |
| Парткод: | M505181 |
| Деталь: | Flushing tray |
| Парткод: | M505124 |
| Деталь: | Flushing tray F |
| Парткод: | M505049 |
| Деталь: | UV ray cover plate left |
| Парткод: | M505047 |
| Деталь: | Air case top |
| Парткод: | M505012 |
| Деталь: | Mist filter BKT |
| Парткод: | M505015 |
| Деталь: | UV ray cover plate right |
| Парткод: | M505060 |
| Деталь: | X table leg |
| Парткод: | M204154 |
| Деталь: | AF BKT |
| Парткод: | M505000 |
| Деталь: | Shelf |
| Парткод: | M505017 |
| Деталь: | Air case lower |
| Парткод: | M504209 |
| Деталь: | Air case lower cover |
| Парткод: | M504210 |
| Деталь: | Collar base |
| Парткод: | M504211 |
| Деталь: | Filter base |
| Парткод: | M504212 |
| Деталь: | Filter guide |
| Парткод: | M504213 |
| Деталь: | AF Nipple stay |
| Парткод: | M504219 |
| Деталь: | Nipple housing |
| Парткод: | M504220 |
| Деталь: | Filter collar L |
| Парткод: | M203744 |
| Деталь: | Filter collar S |
| Парткод: | M203745 |
| Деталь: | Blower joint |
| Парткод: | M600174 |
| Деталь: | Nipple (1-1/4x38) |
| Парткод: | M205019 |
| Деталь: | Thermal relay |
| Парткод: | MP-TR-ONH/3(5-8A) |
| Деталь: | Auxiliary silencer |
| Парткод: | VFY023B |
| Деталь: | Air filter |
| Парткод: | MP-VFY031A |
| Деталь: | Blower assy |
| Парткод: | E104018 |
| Деталь: | MOUNT |
| Парткод: | EA4003 |
| Деталь: | Thermal relay short assy |
| Парткод: | E104003 |
| Деталь: | POWER SWITCH |
| Парткод: | MP-AJ921002WW3F |
| Деталь: | GREEN-LED assy |
| Парткод: | E103974 |
| Деталь: | ORANGE-LED assy |
| Парткод: | E103975 |
| Деталь: | RED-LED assy |
| Парткод: | E103973 |
| Деталь: | FILTER |
| Парткод: | A101437 |
| Деталь: | Element AF4000-002 |
| Парткод: | SPC-0225 |
| Деталь: | Caution label-Work |
| Парткод: | M903330 |
| Деталь: | UV form indicate label |
| Парткод: | M903742 |
| Деталь: | Suck slide shaft cover |
| Парткод: | M505225 |
| Деталь: | Suck nozzle cover |
| Парткод: | M507010 |
| Деталь: | Suck nozzle 2.5 |
| Парткод: | MP-M601390 |
| Деталь: | Suck nozzle 2.5 |
| Парткод: | M602452 |
| Деталь: | Suck nozzle holder |
| Парткод: | M204196 |
| Деталь: | Wiper belt holder plate UJ |
| Парткод: | M505081 |
| Деталь: | Norprene Tube 1.593.18 |
| Парткод: | MP-A-55-G |
| Деталь: | Suck BKT |
| Парткод: | M601391 |
| Деталь: | Wiper gear flange |
| Парткод: | M503696 |
| Деталь: | PULLEY BELT |
| Парткод: | MP-40 S2M 520U |
| Деталь: | Wiper gear S |
| Парткод: | M601055 |
| Деталь: | Wiper shaft F |
| Парткод: | M204195 |
| Деталь: | Maintenance BKT F |
| Парткод: | M507009 |
| Деталь: | Wiper sensor BKT II |
| Парткод: | M507143 |
| Деталь: | Front and rear point sensor |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | Wiper motor BKT S |
| Парткод: | M503455 |
| Деталь: | Station motor gear |
| Парткод: | M400211 |
| Деталь: | STEP MOTOR |
| Парткод: | E300354 |
| Деталь: | Ink guard plate |
| Парткод: | M507007 |
| Деталь: | Cap up and down guide 1 |
| Парткод: | M601388 |
| Деталь: | Cap up and down guide 2F |
| Парткод: | M601389 |
| Деталь: | Cap frame |
| Парткод: | M507008 |
| Деталь: | Cap frame guide |
| Парткод: | M504988 |
| Деталь: | F-R origin sensor connection cable assy |
| Парткод: | E103969 |
| Деталь: | UJF F-R S motor connection cable assy |
| Парткод: | E104026 |
| Деталь: | Tension pulley ST |
| Парткод: | M601393 |
| Деталь: | COLLAR |
| Парткод: | M204204 |
| Деталь: | W-T BKT |
| Парткод: | M504293 |
| Деталь: | Head assy (CA4) |
| Парткод: | MP-M007040 |
| Деталь: | DAMPER ASSY |
| Парткод: | MP-M005841 |
| Деталь: | Damper connector assy |
| Парткод: | MP-M005842 |
| Деталь: | FG strap |
| Парткод: | MP-FGST-100-10-M3C |
| Деталь: | O ring S25EP |
| Парткод: | M700355 |
| Деталь: | DAMPER |
| Парткод: | M601375 |
| Деталь: | Connector cap |
| Парткод: | M601784 |
| Деталь: | O ring S8 |
| Парткод: | M700370 |
| Деталь: | Damper connector |
| Парткод: | M601401 |
| Деталь: | Head holder |
| Парткод: | M505807 |
| Деталь: | First filter holder |
| Парткод: | M505283 |
| Деталь: | CA4-TSB |
| Парткод: | MP-KX-CA41586-OU-TSB |
| Деталь: | Head BKT B |
| Парткод: | M400323 |
| Деталь: | Filter BKT |
| Парткод: | M505176 |
| Деталь: | Tygon tube 2275 3.186.35(15M) |
| Парткод: | MP-AER00007 |
| Деталь: | FPC holder T |
| Парткод: | M504981 |
| Деталь: | Black single tub (100m) |
| Парткод: | MP-SJ-LTU2.54.5 |
| Деталь: | Filter assy 10 |
| Парткод: | MP-M601405 |
| Деталь: | Cap nut f2.5 |
| Парткод: | M204217 |
| Деталь: | Damper coupling |
| Парткод: | M204246 |
| Деталь: | Head BKT holder L II |
| Парткод: | M205086 |
| Деталь: | Head BKT holder R II |
| Парткод: | M205085 |
| Деталь: | AD piece |
| Парткод: | M400321 |
| Деталь: | Angle SP |
| Парткод: | M800570 |
| Деталь: | AD piece base |
| Парткод: | M400322 |
| Деталь: | Head BKT II |
| Парткод: | M400285 |
| Деталь: | Head guard plate |
| Парткод: | M204191 |
| Деталь: | Flex cable |
| Парткод: | MP-TFL100R-20-0270(W5) |
| Деталь: | Cap nut UJS4-M102 |
| Парткод: | M205088 |
| Деталь: | Damper cap assy |
| Парткод: | M601780 |
| Деталь: | O ring S4 |
| Парткод: | MP-M700408 |
| Деталь: | Hose 100m |
| Парткод: | MP-E-PD 46 |
| Деталь: | Mini fitting VFI346 |
| Парткод: | MP-AJ-1055-080 |
| Деталь: | Outer cover T |
| Парткод: | M601880 |
| Деталь: | DAMPER ASSY |
| Парткод: | M009417 |
| Деталь: | Separator T2 |
| Парткод: | M602063 |
| Деталь: | Damper hinge C |
| Парткод: | M505328 |
| Деталь: | COVER SENSOR ASSY |
| Парткод: | MP-E102930 |
| Деталь: | Front cover SW BKT II |
| Парткод: | M508186 |
| Деталь: | Damper washer |
| Парткод: | M507016 |
| Деталь: | Damper BKT |
| Парткод: | M204201 |
| Деталь: | ROTARY DAMPER |
| Парткод: | MP-B-879-1-R 20K |
| Деталь: | Damper holder |
| Парткод: | M505104 |
| Деталь: | ROTARY DAMPER |
| Парткод: | MP-B-879-1-L 20K |
| Деталь: | Damper holder C |
| Парткод: | M505326 |
| Деталь: | Right front cover FC |
| Парткод: | M505093 |
| Деталь: | Right cover FC |
| Парткод: | M505105 |
| Деталь: | Right side plate FC |
| Парткод: | M505087 |
| Деталь: | Right front cover angle under-FC |
| Парткод: | M507012 |
| Деталь: | Right front cover angle top-FC |
| Парткод: | M507011 |
| Деталь: | KB sheet |
| Парткод: | M903575 |
| Деталь: | LCD window |
| Парткод: | M600520 |
| Деталь: | KB panel |
| Парткод: | M601023 |
| Деталь: | Panel key |
| Парткод: | M601867 |
| Деталь: | Keyboard PCB assy |
| Парткод: | MP-E103700 |
| Деталь: | Keyboard BKT |
| Парткод: | M505091 |
| Деталь: | Right leg rear cover (TOP) |
| Парткод: | M504984 |
| Деталь: | Right leg rear cover (UNDER) |
| Парткод: | M504983 |
| Деталь: | Right front under cover FC |
| Парткод: | M505103 |
| Деталь: | Right leg pump cover |
| Парткод: | M505109 |
| Деталь: | Pump cover pin |
| Парткод: | M204202 |
| Деталь: | Right sub side plate FC |
| Парткод: | M505089 |
| Деталь: | UV Shading sheet right |
| Парткод: | M601491 |
| Деталь: | Shading sheet holder plate (TOP) |
| Парткод: | M507018 |
| Деталь: | Shading sheet holder plate (UNDER) |
| Парткод: | M507019 |
| Деталь: | Keyboard back plate |
| Парткод: | M505798 |
| Деталь: | UV Optical attention name plate large |
| Парткод: | M903946 |
| Деталь: | UJF front cover sensor connection cable assy |
| Парткод: | E104033 |
| Деталь: | Keyboard cable assy |
| Парткод: | E103963 |
| Деталь: | FDA proof plate |
| Парткод: | M904130 |
| Деталь: | Label-VCCI/FCC |
| Парткод: | M902535 |
| Деталь: | UJF-605CII manufacturing name plate |
| Парткод: | M904801 |
| Деталь: | UV heat attention name plate |
| Парткод: | M903763 |
| Деталь: | Caution label-Power voltage adjustment |
| Парткод: | M903281 |
| Деталь: | Power supply name plte (UJ) 200-2300 |
| Парткод: | M904185 |
| Деталь: | Socket plate |
| Парткод: | M902396 |
| Деталь: | Station shaft assy |
| Парткод: | M505077 |
| Деталь: | Station cam |
| Парткод: | M601047 |
| Деталь: | Station base UJ |
| Парткод: | M504991 |
| Деталь: | STEP MOTOR |
| Парткод: | E300354 |
| Деталь: | Station motor gear |
| Парткод: | M400211 |
| Деталь: | Station gear 1 |
| Парткод: | M601045 |
| Деталь: | Station gear 2 |
| Парткод: | M601046 |
| Деталь: | Cam shaft UJ |
| Парткод: | M204194 |
| Деталь: | S-T BKT |
| Парткод: | M503800 |
| Деталь: | Up down origin sensor |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | sta. U-D sensor BKT II |
| Парткод: | M507144 |
| Деталь: | UJF U-D S motor connection cable assy |
| Парткод: | E104025 |
| Деталь: | Cam origin sensor connection cable assy |
| Парткод: | E103970 |
| Деталь: | Tension pulley ST |
| Парткод: | M601393 |
| Деталь: | COLLAR |
| Парткод: | M204204 |
| Деталь: | Station cam T2 |
| Парткод: | M206425 |
| Деталь: | Station cam T3 |
| Парткод: | MP-M602529 |
| Деталь: | Bear guide film UJF |
| Парткод: | M601381 |
| Деталь: | Y bar holder plate left |
| Парткод: | M204171 |
| Деталь: | Bear guide film length UJF |
| Парткод: | M601382 |
| Деталь: | Bear guide UJF |
| Парткод: | M505021 |
| Деталь: | Y FPC holder |
| Парткод: | M505083 |
| Деталь: | K washer |
| Парткод: | M502932 |
| Деталь: | Y bar UJFR |
| Парткод: | M300866 |
| Деталь: | Y bar UJFF |
| Парткод: | M300865 |
| Деталь: | Scale holder |
| Парткод: | M601077 |
| Деталь: | LM guide 1960C1 |
| Парткод: | M800700 |
| Деталь: | Y bar holder upper plate right |
| Парткод: | M204168 |
| Деталь: | Y bar holder plate right |
| Парткод: | M204170 |
| Деталь: | Y bar support plate |
| Парткод: | M204167 |
| Деталь: | Multi tube holder |
| Парткод: | MP-TM-04 |
| Деталь: | Multi tube holder |
| Парткод: | MP-TM-06 |
| Деталь: | Y bar holder upper plate left |
| Парткод: | M204169 |
| Деталь: | THERMOSTAT |
| Парткод: | MP-EGO1326212 |
| Деталь: | Warm water pump base |
| Парткод: | M507819 |
| Деталь: | Diaphragm pump assy |
| Парткод: | MP-E103972 |
| Деталь: | FUSE |
| Парткод: | MP-GP75 |
| Деталь: | Hose 100m |
| Парткод: | MP-E-PD 46 |
| Деталь: | Warm water pump cassette base |
| Парткод: | M505216 |
| Деталь: | Heater fuse assy |
| Парткод: | E103978 |
| Деталь: | PUMP GEAR |
| Парткод: | M400216 |
| Деталь: | STEP MOTOR |
| Парткод: | E300354 |
| Деталь: | GEAR 24 |
| Парткод: | M601073 |
| Деталь: | Warm water rear guard |
| Парткод: | M505123 |
| Деталь: | Warm water base |
| Парткод: | M505064 |
| Деталь: | UJF warm water S motor connection cable assy |
| Парткод: | E104035 |
| Деталь: | Heater connection cable assy |
| Парткод: | E104530 |
| Деталь: | Terminal-fuse connection cable assy |
| Парткод: | E103990 |
| Деталь: | Diaphragm pump relay cable assy |
| Парткод: | E104012 |
| Деталь: | SSR control cable assy |
| Парткод: | E104006 |
| Деталь: | Ink exhaust pump assy |
| Парткод: | E104528 |
| Деталь: | Black single tube(1m) |
| Парткод: | MP-SJ-LTU46 |
| Деталь: | Mini fitting |
| Парткод: | MP-GJ-1058-12 |
| Деталь: | Hot water supply pump |
| Парткод: | MP-M801306 |
| Деталь: | Extention tube assy for hot water pump |
| Парткод: | MP-M010831 |
| Деталь: | Cartridge PCB assy |
| Парткод: | MP-E103726 |
| Деталь: | SLIDER-Relay - cartridge PCB connect cable assy |
| Парткод: | E103982 |
| Деталь: | Station cartridge PCB connection cable assy |
| Парткод: | MP-E104001 |
| Деталь: | UVIO PCB assy |
| Парткод: | MP-E103727 |
| Деталь: | Warm water control PCB assy |
| Парткод: | MP-E103728 |
| Деталь: | Warm water control PCB connect cable assy |
| Парткод: | MP-E103981 |
| Деталь: | Warm water control - X relay PCB connect cable assy |
| Парткод: | MP-E103984 |
| Деталь: | Station IO PCB assy |
| Парткод: | MP-E103725 |
| Деталь: | X-Relay PCB assy |
| Парткод: | MP-E103851 |
| Деталь: | Table-Z PCB |
| Парткод: | MP-E103941 |
| Деталь: | Table-Z -X relay PCB connect cable assy |
| Парткод: | MP-E103985 |
| Деталь: | Service connector assy |
| Парткод: | E104023 |
| Деталь: | Adjust-UV Inverter D-Sub cable assy |
| Парткод: | E104014 |
| Деталь: | X motor relay cable assy |
| Парткод: | E103983 |
| Деталь: | Cover sensor short assy |
| Парткод: | E104034 |
| Деталь: | Y-SP plate 24 N |
| Парткод: | M505621 |
| Деталь: | Y-SP |
| Парткод: | M800569 |
| Деталь: | Y-T fulcrum shaft 24 |
| Парткод: | M204198 |
| Деталь: | Y-T pulley BKT24 |
| Парткод: | M504987 |
| Деталь: | Y-T BKT24 |
| Парткод: | M504986 |
| Деталь: | Belt holder S |
| Парткод: | M504982 |
| Деталь: | Belt holder |
| Парткод: | M400254 |
| Деталь: | D BKT U |
| Парткод: | M502708 |
| Деталь: | O ring |
| Парткод: | MP-P-9 |
| Деталь: | Y driven pulley washer |
| Парткод: | M505249 |
| Деталь: | Clean belt |
| Парткод: | MP-150 S2M 380G |
| Деталь: | Y drive shaft |
| Парткод: | M204166 |
| Деталь: | Y motor BKT |
| Парткод: | M505018 |
| Деталь: | YM spacer |
| Парткод: | M202665 |
| Деталь: | YM top plate |
| Парткод: | M502710 |
| Деталь: | BEARING |
| Парткод: | MP-F607ZZ |
| Деталь: | Belt holder UV |
| Парткод: | M505059 |
| Деталь: | Belt use screw |
| Парткод: | M400284 |
| Деталь: | Slider couple plate |
| Парткод: | M505057 |
| Деталь: | Belt holder HD |
| Парткод: | M505058 |
| Деталь: | UJF-Y motor relay cable assy |
| Парткод: | E104013 |
| Деталь: | Y DRIVE PULLEY ASSY |
| Парткод: | MP-M009490 |
| Деталь: | Y tension pulley assy |
| Парткод: | MP-M009491 |
| Деталь: | Y motor assy |
| Парткод: | MP-M010497 |
| Деталь: | Right leg assy. (C) |
| Парткод: | M007028 |
| Деталь: | Right leg |
| Парткод: | M505063 |
| Деталь: | Adjuster foot |
| Парткод: | MP-TM-257-3 |
| Деталь: | Left leg assy. (C) |
| Парткод: | M007029 |
| Деталь: | Left leg |
| Парткод: | M505050 |
| Деталь: | Waste Ink Tube Guide |
| Парткод: | M601392 |
| Деталь: | Waste ink tank 2L |
| Парткод: | SPC-0117 |
| Деталь: | Waste tank base |
| Парткод: | M505073 |
| Деталь: | Latch BKT |
| Парткод: | M505062 |
| Деталь: | Waste ink cap hinge plate |
| Парткод: | M505070 |
| Деталь: | Waste ink cap |
| Парткод: | M505069 |
| Деталь: | Pin spring |
| Парткод: | M800564 |
| Деталь: | Cap fulcrum shaft |
| Парткод: | M204193 |
| Деталь: | Waste ink tank sensor |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | Waste tank sensor dog SUS |
| Парткод: | M505072 |
| Деталь: | Waste tank spring SUS |
| Парткод: | M800701 |
| Деталь: | Waste tank slider |
| Парткод: | M505071 |
| Деталь: | Collar 3-5-2 |
| Парткод: | M204192 |
| Деталь: | Waste ink tank sensor connection cable assy |
| Парткод: | E103968 |
| Деталь: | Caution label-Work |
| Парткод: | M903330 |
| Деталь: | Suck pump BKT |
| Парткод: | M505066 |
| Деталь: | PUMP GEAR |
| Парткод: | M400216 |
| Деталь: | Suck pump base |
| Парткод: | M505067 |
| Деталь: | GEAR 24 |
| Парткод: | M601073 |
| Деталь: | STEP MOTOR |
| Парткод: | E300354 |
| Деталь: | UJF pump motor connection cable assy |
| Парткод: | E104024 |
| Деталь: | Tube maintenance set |
| Парткод: | MP-X-0604-2-W6SET |
| Деталь: | Pump(for ROHS) without tube |
| Парткод: | MP-WP1000-(F)B2 |
| Деталь: | Pump cassette AS (for ROHS) wituout tube |
| Парткод: | MP-WP1000-(F)-2-CA |
| Деталь: | UV Light cover plate TB |
| Парткод: | M504999 |
| Деталь: | X slider cover side C |
| Парткод: | M505002 |
| Деталь: | X slider cover top C |
| Парткод: | M505001 |
| Деталь: | X table rear cover C |
| Парткод: | M505006 |
| Деталь: | X table front cover C |
| Парткод: | M505005 |
| Деталь: | X table stay rear cover C |
| Парткод: | M505003 |
| Деталь: | X table stay front cover C |
| Парткод: | M505004 |
| Деталь: | Damper hinge C |
| Парткод: | M505328 |
| Деталь: | Front cover SW BKT II |
| Парткод: | M508186 |
| Деталь: | COVER SENSOR ASSY |
| Парткод: | MP-E104413 |
| Деталь: | Left cover FC |
| Парткод: | M505106 |
| Деталь: | Left side plate FC |
| Парткод: | M505088 |
| Деталь: | Left front cover angle top-FC |
| Парткод: | M507013 |
| Деталь: | Left front cover angle under-FC |
| Парткод: | M507014 |
| Деталь: | Damper washer |
| Парткод: | M507016 |
| Деталь: | Damper BKT |
| Парткод: | M204201 |
| Деталь: | ROTARY DAMPER |
| Парткод: | MP-B-879-1-R 20K |
| Деталь: | Damper holder |
| Парткод: | M505104 |
| Деталь: | ROTARY DAMPER |
| Парткод: | MP-B-879-1-L 20K |
| Деталь: | Damper holder C |
| Парткод: | M505326 |
| Деталь: | Left front cover FC |
| Парткод: | M505092 |
| Деталь: | Left leg rear cover (TOP) |
| Парткод: | M505052 |
| Деталь: | Left leg rear cover (UNDER) |
| Парткод: | M505051 |
| Деталь: | Left front under cover FC |
| Парткод: | M505102 |
| Деталь: | Left sub side plate FC |
| Парткод: | M505090 |
| Деталь: | Switch BKT guard |
| Парткод: | M506120 |
| Деталь: | UV Shading sheet left |
| Парткод: | M601490 |
| Деталь: | Shading sheet holder plate (TOP) |
| Парткод: | M507018 |
| Деталь: | Shading sheet holder plate (UNDER) |
| Парткод: | M507019 |
| Деталь: | UV Optical attention name plate large |
| Парткод: | M903946 |
| Деталь: | UJF front cover sensor connection cable assy |
| Парткод: | E104033 |
| Деталь: | Left shaft fan assy |
| Парткод: | E104031 |
| Деталь: | UJF left shaft fan connection cable assy |
| Парткод: | MP-E104032 |
| Деталь: | Finger guard |
| Парткод: | MP-109-019E |
| Деталь: | Protector |
| Парткод: | MP-109-019C |
| Деталь: | Area sensor (F) assy |
| Парткод: | E104007 |
| Деталь: | Area sensor (R) assy |
| Парткод: | E104008 |
| Деталь: | Sensor connection cable assy |
| Парткод: | E104010 |
| Деталь: | Head height sensor |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | Guide assy. CG-FX |
| Парткод: | MP-M005287 |
| Деталь: | LED holder S |
| Парткод: | M204398 |
| Деталь: | LED pointer assy |
| Парткод: | E104019 |
| Деталь: | Light for LED pointer assy |
| Парткод: | E104028 |
| Деталь: | LED holder C |
| Парткод: | M601479 |
| Деталь: | LED holder B |
| Парткод: | M204397 |
| Деталь: | LED cover |
| Парткод: | M601480 |
| Деталь: | HEAD COVER |
| Парткод: | M504996 |
| Деталь: | Head height sensor connection cable assy |
| Парткод: | E103971 |
| Деталь: | Warm water handle holder |
| Парткод: | M505120 |
| Деталь: | Latch BKT |
| Парткод: | M505062 |
| Деталь: | Waste ink cap hinge plate |
| Парткод: | M505070 |
| Деталь: | Heater guard F |
| Парткод: | M505119 |
| Деталь: | Warm water space door |
| Парткод: | M505121 |
| Деталь: | Pin spring |
| Парткод: | M800564 |
| Деталь: | Cap fulcrum shaft |
| Парткод: | M204193 |
| Деталь: | Tank base |
| Парткод: | M507822 |
| Деталь: | UJ water heater replace operation plate J |
| Парткод: | M904149 |
| Деталь: | UJ water heater replace operation plate E |
| Парткод: | M904150 |
| Деталь: | Temperature attention plate |
| Парткод: | M903239 |
| Деталь: | Slider PCB cover |
| Парткод: | M505085 |
| Деталь: | Flex cable |
| Парткод: | MP-TFL125R-40-3200(W5Q) |
| Деталь: | SLIDER PCB assy |
| Парткод: | MP-E103850 |
| Деталь: | Slider PCB BOX |
| Парткод: | M505086 |
| Деталь: | Slider PCB BKT |
| Парткод: | M505084 |
| Деталь: | Y FPC holder |
| Парткод: | M505083 |
| Деталь: | Scale holder L |
| Парткод: | M503399 |
| Деталь: | Scale holder L |
| Парткод: | M505020 |
| Деталь: | Y Origin sensor |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | Slider stopper |
| Парткод: | M505188 |
| Деталь: | Scale spring hook |
| Парткод: | M505019 |
| Деталь: | Scale hook |
| Парткод: | M503397 |
| Деталь: | Scale holder R |
| Парткод: | M503398 |
| Деталь: | Scale SP |
| Парткод: | M800565 |
| Деталь: | Linear encoder scale UJF-C |
| Парткод: | MP-E300385 |
| Деталь: | L sensor BKT U |
| Парткод: | M505053 |
| Деталь: | 150 LPI encoder PCB assy |
| Парткод: | MP-E103852 |
| Деталь: | Head slider UJF |
| Парткод: | M400253 |
| Деталь: | Linear encoder connection cable assy |
| Парткод: | E103977 |
| Деталь: | Y origin sensor relay cable assy |
| Парткод: | E103967 |
| Деталь: | Multi tube holder |
| Парткод: | MP-TM-06 |
| Деталь: | Multi tube holder |
| Парткод: | MP-TM-04 |
| Деталь: | JV4 1394 I/F PCB assy |
| Парткод: | MP-E103898 |
| Деталь: | I/F connection PCB assy |
| Парткод: | MP-E103701 |
| Деталь: | UHC PCB assy |
| Парткод: | MP-E103847 |
| Деталь: | Flex cable |
| Парткод: | MP-TFL125R-20-0220(W5) |
| Деталь: | MAIN PCB ASSY |
| Парткод: | MP-E103845 |
| Деталь: | SLIDER-Relay PCB assy |
| Парткод: | MP-E103849 |
| Деталь: | UHC holder (B) |
| Парткод: | M505046 |
| Деталь: | STOPPER |
| Парткод: | M505048 |
| Деталь: | UHC guide |
| Парткод: | M601387 |
| Деталь: | Cable BKT top |
| Парткод: | M505578 |
| Деталь: | Cable BKT under |
| Парткод: | M505579 |
| Деталь: | Power supply mounting plate F |
| Парткод: | M505122 |
| Деталь: | UV Power-supply unit |
| Парткод: | MP-EMC-13HK-3D1 |
| Деталь: | UV Power cable (power supply side) assy |
| Парткод: | E104022 |
| Деталь: | Adjust-UV Inverter I/F cable assy |
| Парткод: | E104015 |
| Деталь: | Adjust-UV Inverter D-Sub cable assy |
| Парткод: | E104014 |
| Деталь: | Light quantity monitor fixation angle |
| Парткод: | M507824 |
| Деталь: | UV light monitor |
| Парткод: | E300502 |
| Деталь: | Light quantity monitor connection cable assy |
| Парткод: | E104532 |
| Деталь: | SLIDER-relay PCB connection cable assy |
| Парткод: | E103964 |
| Деталь: | UV I/O PCB connection cable assy |
| Парткод: | E103965 |
| Деталь: | Station I/O PCB connection cable assy |
| Парткод: | E103966 |
| Деталь: | X motor relay cable assy |
| Парткод: | E103983 |
| Деталь: | motor interlock cable assy |
| Парткод: | E103980 |
| Деталь: | Area sensor (R) assy |
| Парткод: | MP-E104008 |
| Деталь: | Area sensor BKT (R) |
| Парткод: | M204530 |
| Деталь: | Turn BKT (R) |
| Парткод: | M204532 |
| Деталь: | Area sensor base (R1) |
| Парткод: | M204538 |
| Деталь: | Area sensor base (R2) |
| Парткод: | M204540 |
| Деталь: | Area sensor slider (R1) |
| Парткод: | M204534 |
| Деталь: | Sensor guide shaft |
| Парткод: | M204541 |
| Деталь: | Area sensor slider (R2) |
| Парткод: | M204536 |
| Деталь: | Adjustment piece base |
| Парткод: | M204539 |
| Деталь: | Angle SP |
| Парткод: | M800570 |
| Деталь: | AD piece |
| Парткод: | M204141 |
| Деталь: | Area sensor (F) assy |
| Парткод: | MP-E104007 |
| Деталь: | Area sensor BKT (F) |
| Парткод: | M204529 |
| Деталь: | Turn BKT (F) |
| Парткод: | M204531 |
| Деталь: | Area sensor base (F1) |
| Парткод: | M204535 |
| Деталь: | Area sensor slider (F) |
| Парткод: | M204533 |
| Деталь: | Area sensor base (F2) |
| Парткод: | M204537 |
| Деталь: | Reflector BKT |
| Парткод: | M507015 |
| Деталь: | REFLECTOR |
| Парткод: | MP-R-7 |
| Деталь: | Area sensor head |
| Парткод: | MP-LV-H62 |
| Деталь: | Terminal base |
| Парткод: | M505068 |
| Деталь: | Supply terminal assy |
| Парткод: | E104239 |
| Деталь: | 200V terminal assy |
| Парткод: | E104004 |
| Деталь: | Power supply assy. packing Assy. (for only maintenance) |
| Парткод: | M013517 |
| Деталь: | POWER SUPPLY ASSY |
| Парткод: | MP-E300464 |
| Деталь: | 200V terminal-CB connection cable assy |
| Парткод: | E103996 |
| Деталь: | CB-distribution terminal connection cable assy |
| Парткод: | E103997 |
| Деталь: | Distribution terminal-relay connection cable assy |
| Парткод: | E103998 |
| Деталь: | Distribution terminal-SW connection cable assy |
| Парткод: | E104002 |
| Деталь: | Blower control cable assy |
| Парткод: | E103993 |
| Деталь: | UV control cable assy |
| Парткод: | E103994 |
| Деталь: | UJF RL side blower connection cable assy |
| Парткод: | E104036 |
| Деталь: | UJF TR side blower connection cable assy |
| Парткод: | E104037 |
| Деталь: | UV power cable (Main body side) assy |
| Парткод: | E104021 |
| Деталь: | UJ main body Power cable assy |
| Парткод: | E104020 |
| Деталь: | Terminal fuse connection cable assy |
| Парткод: | E103990 |
| Деталь: | NF connection cable assy |
| Парткод: | E103986 |
| Деталь: | NF-FG connection cable assy |
| Парткод: | E103987 |
| Деталь: | NF-power connection cable assy |
| Парткод: | E103989 |
| Деталь: | DC power cable assy |
| Парткод: | E104011 |
| Деталь: | Power-FG line assy |
| Парткод: | E103988 |
| Деталь: | Power ON harness assy |
| Парткод: | E103962 |
| Деталь: | Earth cable name plate |
| Парткод: | M902324 |
| Деталь: | FPC holder |
| Парткод: | M505178 |
| Деталь: | Bear BKT |
| Парткод: | M505113 |
| Деталь: | Drawing panel SH08 |
| Парткод: | M204606 |
| Деталь: | Honeycomb panel UJ |
| Парткод: | M204200 |
| Деталь: | Ventilator UJ |
| Парткод: | M601384 |
| Деталь: | Adsorption table assy |
| Парткод: | M006279 |
| Деталь: | Adsorption table rear cover |
| Парткод: | M204183 |
| Деталь: | Slide Shaft |
| Парткод: | M204177 |
| Деталь: | Cam plate tension BKT |
| Парткод: | M507005 |
| Деталь: | Cam plate tension holder |
| Парткод: | M204175 |
| Деталь: | Cam plate base |
| Парткод: | M204176 |
| Деталь: | Up and down cam plate right |
| Парткод: | M204184 |
| Деталь: | Up and down cam plate left |
| Парткод: | M204185 |
| Деталь: | Table cover R |
| Парткод: | M505576 |
| Деталь: | Table cover L |
| Парткод: | M5055771 |
| Деталь: | Origin point seal |
| Парткод: | M900374 |
| Деталь: | PLATE SPRING |
| Парткод: | MP-1007731 |
| Деталь: | Cartridge guide 1 |
| Парткод: | M600592 |
| Деталь: | Black shingle tube (100m) |
| Парткод: | MP-SJ-LTU2.54.5 |
| Деталь: | Cap nut UJS4-M102 |
| Парткод: | M205088 |
| Деталь: | Cartridge base R processed |
| Парткод: | M601702 |
| Деталь: | Cartridge frame |
| Парткод: | M600887 |
| Деталь: | Cartridge guide 2 |
| Парткод: | M601486 |
| Деталь: | O ring S4 |
| Парткод: | MP-M700408 |
| Деталь: | ID contact PCB CN032 assy |
| Парткод: | MP-E105363 |
| Деталь: | Edge guard CS |
| Парткод: | M601877 |
| Деталь: | Cartridge sensor |
| Парткод: | MP-1033477 |
| Деталь: | Plate spring (C) |
| Парткод: | M502166 |
| Деталь: | Edge guard CL |
| Парткод: | M601876 |
| Деталь: | Cartridge case top plate |
| Парткод: | M505023 |
| Деталь: | Cartridge case |
| Парткод: | M505022 |
| Деталь: | Cartridge base |
| Парткод: | M505024 |
| Деталь: | ID contact PCB connection cable assy |
| Парткод: | E103976 |
| Деталь: | Cartridge coupling assy |
| Парткод: | M601427 |
| Деталь: | Ventilator |
| Парткод: | M505189 |
| Деталь: | Up cover FC |
| Парткод: | M505114 |
| Деталь: | Center rear cover |
| Парткод: | M505180 |
| Деталь: | UV light sheld side curtain |
| Парткод: | M601616 |
| Деталь: | Left front cover BKT FC |
| Парткод: | M505096 |
| Деталь: | Front up cover FC |
| Парткод: | M505094 |
| Деталь: | Front cover SWBKT II |
| Парткод: | M505186 |
| Деталь: | COVER SENSOR ASSY |
| Парткод: | MP-E104413 |
| Деталь: | Right front cover BKT FC |
| Парткод: | M505095 |
| Деталь: | Center cover insulation |
| Парткод: | M601372 |
| Деталь: | Front cover window plate FC |
| Парткод: | M601371 |
| Деталь: | Front cover window holder |
| Парткод: | M505108 |
| Деталь: | Damper washer |
| Парткод: | M507016 |
| Деталь: | Damper BKT |
| Парткод: | M204201 |
| Деталь: | ROTARY DAMPER |
| Парткод: | MP-B-879-1-R 20K |
| Деталь: | Damper holder |
| Парткод: | M505104 |
| Деталь: | Front cover FC |
| Парткод: | M505097 |
| Деталь: | ROTARY DAMPER |
| Парткод: | MP-B-879-1-L 20K |
| Деталь: | Table cover FC |
| Парткод: | M505101 |
| Деталь: | UV Optical attention name plate large |
| Парткод: | M903946 |
| Деталь: | UV Optical attention name plate |
| Парткод: | M903747 |
| Деталь: | Front cover attention name plate |
| Парткод: | M901549 |
| Деталь: | Cover attention name plate |
| Парткод: | M901607 |
| Деталь: | UJF front cover sensor connection cable assy |
| Парткод: | E104033 |
| Деталь: | Laser opening plate |
| Парткод: | M904131 |
| Деталь: | UJ laser caution plate |
| Парткод: | M904148 |
| Деталь: | UJV cover caution plate |
| Парткод: | M904152 |
| Деталь: | UV light sheld curtain |
| Парткод: | M601394 |
| Деталь: | GP X motor |
| Парткод: | MP-E300443 |
| Деталь: | Motor pulley |
| Парткод: | M204163 |
| Деталь: | Motor BKT |
| Парткод: | M204162 |
| Деталь: | X shaft origin sensor BKT |
| Парткод: | M507548 |
| Деталь: | X origin sensor |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | Nut BR |
| Парткод: | M204157 |
| Деталь: | Ball screw |
| Парткод: | M204161 |
| Деталь: | Screw shaft pulley |
| Парткод: | M204158 |
| Деталь: | Cover Holder |
| Парткод: | M505013 |
| Деталь: | Base plate (ball LM) |
| Парткод: | M204160 |
| Деталь: | Hole collar |
| Парткод: | M204165 |
| Деталь: | Base adjust holder |
| Парткод: | M205020 |
| Деталь: | Z bear guide |
| Парткод: | M505112 |
| Деталь: | Fulcrum BKT |
| Парткод: | M505016 |
| Деталь: | Fulcrum pin |
| Парткод: | M204164 |
| Деталь: | Panel switch (C) assy |
| Парткод: | MP-E104000 |
| Деталь: | Switch box |
| Парткод: | M505111 |
| Деталь: | Switch box BKT |
| Парткод: | M505179 |
| Деталь: | Switch box holder |
| Парткод: | M505110 |
| Деталь: | X origin sensor connection cable assy |
| Парткод: | E103992 |
| Деталь: | EM switch stopper plate |
| Парткод: | M903749 |
| Деталь: | Arm A left |
| Парткод: | M505011 |
| Деталь: | Position decide bolt |
| Парткод: | M204182 |
| Деталь: | Arm A right |
| Парткод: | M505010 |
| Деталь: | X slider couple plate |
| Парткод: | M204153 |
| Деталь: | X slider spacer |
| Парткод: | M204203 |
| Деталь: | X slider |
| Парткод: | M204152 |
| Деталь: | SLIDER PLATE |
| Парткод: | M204151 |
| Деталь: | X shaft dog |
| Парткод: | M505009 |
| Деталь: | LM stopper |
| Парткод: | M204150 |
| Деталь: | Guide base right |
| Парткод: | M204155 |
| Деталь: | Guide base left |
| Парткод: | M204156 |
| Деталь: | Up-and-down screw holder A |
| Парткод: | M505042 |
| Деталь: | BEARING |
| Парткод: | MP-MF128ZZS |
| Деталь: | Up-and-down screw left |
| Парткод: | M204188 |
| Деталь: | BEARING |
| Парткод: | MP-MF126ZZ |
| Деталь: | Timing pulley |
| Парткод: | M204178 |
| Деталь: | Up-and-down screw holder B |
| Парткод: | M505043 |
| Деталь: | Tension pulley shaft assy |
| Парткод: | M505039 |
| Деталь: | Tension pulley |
| Парткод: | M601385 |
| Деталь: | TIMING BELT |
| Парткод: | MP-B100 S3M 927 |
| Деталь: | Up-and-down screw right |
| Парткод: | M204187 |
| Деталь: | Screw shaft pulley |
| Парткод: | M204180 |
| Деталь: | Conduction cover |
| Парткод: | M505044 |
| Деталь: | TIMING BELT |
| Парткод: | MP-B100 S3M 192 |
| Деталь: | Motor pulley |
| Парткод: | M204181 |
| Деталь: | Motor BR |
| Парткод: | M505040 |
| Деталь: | Z motor assy |
| Парткод: | E103995 |
| Деталь: | NUT |
| Парткод: | M204179 |
| Деталь: | Slide panel |
| Парткод: | M505038 |
| Деталь: | BR frame |
| Парткод: | M505034 |
| Деталь: | BR shaft |
| Парткод: | M204174 |
| Деталь: | BEARING |
| Парткод: | MP-626ZZ |
| Деталь: | Drive panel |
| Парткод: | M505041 |
| Деталь: | Z axis dog C |
| Парткод: | M505035 |
| Деталь: | Hose 100m |
| Парткод: | MP-E-PD 46 |
| Деталь: | Thermo couple assy |
| Парткод: | E103991 |
| Деталь: | Terminal cover F |
| Парткод: | M505744 |
| Деталь: | Tank cap |
| Парткод: | M204148 |
| Деталь: | Rubber packing |
| Парткод: | M700354 |
| Деталь: | Suck bottle joint |
| Парткод: | M204277 |
| Деталь: | Cap processed |
| Парткод: | M601374 |
| Деталь: | Suck bottle pad 1 |
| Парткод: | M601419 |
| Деталь: | Bottle holder 1 |
| Парткод: | M504997 |
| Деталь: | Bottle holder 2 |
| Парткод: | M504998 |
| Деталь: | Suck bottle pad 3 |
| Парткод: | M601421 |
| Деталь: | Suck bottle holder BKT |
| Парткод: | M504989 |
| Деталь: | Suck bottle pad 2 |
| Парткод: | M601420 |
| Деталь: | Suck bottlejoint |
| Парткод: | M205297 |
| Деталь: | Compression fitting |
| Парткод: | MP-ZCP1814 |
| Деталь: | Float sensor (V) assy |
| Парткод: | E103999 |
| Деталь: | Float sensor (V) relay cable assy |
| Парткод: | E104005 |
| Деталь: | UJF warm water FG connection cable assy |
| Парткод: | E104027 |
| Деталь: | Tygon tube 2275 3.186.35 |
| Парткод: | MP-AER00007 |
| Деталь: | Cap rubber 23-T-40 |
| Парткод: | MP-M700537 |
| Деталь: | Cap holder |
| Парткод: | M504985 |
| Деталь: | Cap rubber T |
| Парткод: | MP-M700353 |
| Деталь: | Ink exhaust pipe |
| Парткод: | M204143 |
| Деталь: | Cap base |
| Парткод: | M204145 |
| Деталь: | Cap BKT P |
| Парткод: | M601369 |
| Деталь: | Norprene Tube 1.593.18(100m) |
| Парткод: | MP-A-55-G |
| Деталь: | Capping sensor dog II |
| Парткод: | M505075 |
| Деталь: | Mini fitting |
| Парткод: | MP-VFT236 |
| Деталь: | Black single tube(1m) |
| Парткод: | MP-SJ-LTU46 |
| Деталь: | Lure fitting female taper(VRF206) |
| Парткод: | GJ-1057-40 |
| Деталь: | Lure fitting plug taper(VRMP6) |
| Парткод: | GJ-1057-37 |
| Деталь: | Suck tube assy |
| Парткод: | MP-M005843 |
| Деталь: | Cap base assy |
| Парткод: | MP-M007574 |
Коды ошибок
01
02
03
04
05
06
07
10
11
12
13
20
23
24
30
34
35
36
40
41
42
43
44
50
51
53
60
61
70
71
72
73
74
n01
n02
n03
n04
n05
n06
n07
n08
n09
n10
n11
n12
n13
Описание
| Error code: | 01 |
| Display: | ERROR CONDITION INVALID HEAD |
| Description: | The ERROR light flashes. |
| Causes: | The printhead was replaced with one that is not a genuine Zebra™ printhead. |
| Remedy: | Install a genuine Zebra printhead. |
| Error code: | 02 |
| Display: | ERROR CONDITION RIBBON OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | In thermal transfer mode, ribbon is not loaded or incorrectly loaded. In thermal transfer mode, the ribbon sensor is not detecting ribbon that is loaded incorrectly. In thermal transfer mode, media is blocking the ribbon sensor. In thermal transfer mode, the printer did not detect the ribbon even though it is loaded correctly. |
| Remedy: | Load ribbon correctly. 1. Load ribbon correctly. See Load Ribbon on page 64. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Load media correctly. See Load Media on page 58. 2. Calibrate the sensors. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. 1. Print a sensor profile. See Print Sensor Profile on page 89. The ribbon out threshold (marked by the word RIBBON) is likely too high, above the black area that indicates where the ribbon is detected. 2. Calibrate the sensors or load printer defaults. See Calibrate Media and Ribbon Sensor Sensitivity on page 90 or LOAD DEFAULTS on page 73. |
| Error code: | 03 |
| Display: | WARNING RIBBON IN |
| Description: | The ERROR light flashes. |
| Causes: | Ribbon is loaded, but the printer is set for direct thermal mode. |
| Remedy: | Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81. |
| Error code: | 04 |
| Display: | ERROR CONDITION PAPER OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded. |
| Remedy: | Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration. |
| Error code: | 05 |
| Display: | ERROR CONDITION HEAD OPEN |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is not fully closed. The head open sensor is not working properly. |
| Remedy: | Replace the sensor. |
| Error code: | 06 |
| Display: | THERMISTOR FAULT |
| Description: | The ERROR light flashes. |
| Causes: | The printhead has a faulty thermistor. |
| Remedy: | Replace the printhead. |
| Error code: | 07 |
| Display: | WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD |
| Description: | The printer stops; the ERROR light is on; the printer cycles through these three messages. |
| Causes: | The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 10 |
| Display: | DEFRAGMENTING |
| Description: | The printer stops. |
| Causes: | The printer is defragmenting memory. |
| Remedy: | Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service. |
| Error code: | 11 |
| Display: | ERROR CONDITION CUTTER JAM |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
| Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
| Error code: | 12 |
| Description: | General print quality issues |
| Causes: | The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced. |
| Remedy: | For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance. |
| Error code: | 13 |
| Description: | Long tracks of missing print on several labels |
| Causes: | Print element damaged. |
| Remedy: | Replace the printhead. |
| Error code: | 20 |
| Description: | Vertical image or label drift |
| Causes: | The printer is using non-continuous labels but is configured in continuous mode. The media sensor is positioned incorrectly. The media sensor is calibrated improperly. The platen roller is dirty. Improper printhead pressure settings (toggles). Improperly loaded ribbon or media. Incompatible media. |
| Remedy: | Configure the printer for non-continuous and run calibration routine, if necessary. Ensure that the media sensor is properly positioned to read a single/consistent interlabel gap. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Clean the platen roller. See Clean the Printhead and Platen Roller on page 131. Adjust the printhead pressure to ensure proper functionality. Verify that the printer is loaded properly. Ensure that the interlabel gaps or notches are 2 to 4 mm and consistently placed. Media must not exceed minimum specifications for mode of operation. |
| Error code: | 23 |
| Description: | Auto Calibrate failed. |
| Causes: | Media or ribbon is loaded incorrectly. The sensors could not detect the media or ribbon. The sensors are dirty or positioned improperly. The sensors are dirty, or media is positioned improperly for the sensors to detect. The media type is set incorrectly. |
| Remedy: | Ensure that media and ribbon are loaded correctly. Manually calibrate the printer. See Calibrate Media and Ribbon Sensor Sensitivity on page 90. Ensure that the sensors are clean and that media is positioned properly. Set the printer for the correct media type (gap/notch, continuous, or mark). See Set Media Type on page 81. |
| Error code: | 24 |
| Description: | A label format was sent to the printer but was not recognized. The DATA light does not flash. |
| Causes: | The communication parameters are incorrect. |
| Remedy: | Check the printer driver or software communications settings (if applicable). If you are using serial communication, check the serial port setting in the control panel menu. See Set Serial Communications on page 91. If you are using serial communication, make sure you are using a null modem cable or a null modem adapter. Using the control panel controls, check the protocol setting. It should be set to NONE. See Set Protocol on page 93. If a driver is used, check the driver communication settings for your connection. |
| Error code: | 30 |
| Description: | The LCD displays a language that I cannot read |
| Causes: | The language parameter was changed through the control panel or a firmware command. |
| Remedy: | 1. Press SETUP/EXIT to enter configuration mode. 2. Press MINUS (-). The printer displays the LANGUAGE parameter in the current language. Even if you cannot recognize the characters displayed, you can still scroll to another language. 3. Press SELECT to select the parameter. 4. Press PLUS (+) or MINUS (-) to scroll through the choices until you find a language that you can read. 5. Press SETUP/EXIT. The LCD displays SAVE CHANGES in the original language. 6. Press SETUP/EXIT again to exit configuration mode and save the changes (if the language does not change, you may need to scroll to a different save option by pressing PLUS (+) or MINUS (-) in the previous step). 7. Repeat this process, if necessary, until you reach the desired language. |
| Error code: | 34 |
| Description: | Non-continuous labels are being treated as continuous labels. |
| Causes: | The printer was not calibrated for the media being used. The printer is configured for continuous media. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. |
| Error code: | 35 |
| Description: | All lights are on, but nothing displays on the LCD, and the printer locks up. |
| Causes: | Internal electronic or firmware failure. |
| Remedy: | Turn the printer power off (O) and then on (I). If the printer locks up again, replace the main logic board. |
| Error code: | 36 |
| Description: | The printer locks up while running the Power-On Self Test. |
| Causes: | Main logic board failure. |
| Remedy: | Replace the main logic board. |
| Error code: | 40 |
| Display: | Scanner locked |
| Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
| Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
| Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
| Error code: | 41 |
| Display: | Self Diagnostic LSU |
| Description: | Install or Reseat Fuser, Code 41 Front thermistor open error. This is a cold condition. Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault is performed. |
| Causes: | • Fuser • Engine Control Board |
| Remedy: | 1 1. Turn OFF power and remove the Fuser Assembly. 2. Measure the resistance between the fuser connector P600-4 and P600-6. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Replace the engine control board. Go to step 3. 3 1. Turn OFF printer power. 2. Check for an open circuit or poor connection between J600-4 to J600-6 to J404A-2. 3. Is the wiring OK? Replace the engine control board. Repair or replace the wiring harness. |
| Error code: | 42 |
| Display: | Self Diagnostic Temperature |
| Description: | 10-352 ERROR 42 FUSER STS (FRONT) WARM TIME FAILURE |
| Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. The tab on the front cover may be damaged or broken 3. Check the connector and cables between Switch and main PBA. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 43 |
| Display: | Send Error (AUTH) |
| Description: | 10-353 ERROR 43 FUSER SSR1 ON TIME FAILURE |
| Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. Check the connector and cables between Switch and main PBA. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 44 |
| Display: | Send Error (DNS) |
| Description: | Fuser Sub Lamp Overheat Failure, Code 44 The front thermistor has detected an overheat condition. Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault is performed. |
| Causes: | • Fuser • Engine Control Board |
| Remedy: | 1 1. Turn OFF power, remove the fuser assembly and allow it to cool down. 2. Measure the resistance between the Fuser connector P600-7 and P600-9. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Go to step 4. Go to step 3. 3 1. Turn OFF printer power. 2. Measure the resistance between J641-4 and J641-5 on the engine control board. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 4. Repair or replace the wiring harness. 4 1. Turn printer power back ON. 2. Is there ~+3.4 VDC between J590-3 and ground? Check the AC wiring harness to the fuser. If the check is OK, replace the AC drive assembly. Replace the engine control board. |
| Error code: | 50 |
| Display: | Tray 2 Paper Empty |
| Description: | Fuser Fan Failure The Fuser Fan rotation signal indicates to the Engine Control Board that the fan is no longer operational. |
| Causes: | • Fuser Fan, PL5.3.31 • FAN/PHD/MOT Harness, PL10.1.9 • Engine Control Board, PL9.1.16 |
| Remedy: | 1 Check the Fuser Fan for damage. Remove the Front Cover. Is the fan damaged? Replace the Fuser Fan. Go to Step 2. 2 Check the Fuser Fan connection. Is P/J482 connected to the harness? Go to Step 2. Reconnect the Fan. 3 Check orientation of the Fuser Fan. Does the Fan’s label face into the chute? Go to Step 3. Correct the installation. 4 Test the Fuser Fan. Run the Service Diagnostics Fuser Fan test. Does the Fan operate. Go to Step 6. Go to Step 5. 5 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J482. 2. Check continuity between J48 <=> P483. Go to Step 5. Replace the FAN/PHD/MOT Harness. 6 Check the fan rotation signal. Print one sheet. Is there +3.3 V across P/J48-A12 <=> P/J48-A13? Replace the Engine Control Board. Replace the Fuser Fan. |
| Error code: | 51 |
| Display: | Send Error (DNS) |
| Description: | Rear Fan Failure The Rear Fan rotation signal indicates the fan is no longer operational. |
| Causes: | • Rear Fan, PL1.1.19 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16 • LV Harness, PL10.1.2 |
| Remedy: | 1 Check the Rear Fan for damage. Remove the Rear Cover. Is the fan damaged? Replace the Rear Fan. Go to Step 2. 2 Check the Rear Fan connection. Is P/J166 connected to the harness? Go to Step 3. Connect the Fan. 3 Check orientation of the Rear Fan. Does the Fan’s label face inwards? Go to Step 4. Correct the installation. 4 Test the Rear Fan. Run the Service Diagnostics Rear Fan test. Does the fan operate? Go to Step 6. Go to Step 5. 5 Check for +24 V to the fan. Disconnect P/J166. Is there +24 V across P166-1 <=> P166-3? Replace the Rear Fan. Replace the LVPS. 6 Check the fan rotation signal to the LVPS. Print one sheet. Is there +3.3 V between P/J166-1 <=> P/J166-3? Replace the Fuser Fan. Go to Step 7. 7 Check the rotation signal from the LVPS. Print one sheet. Is there +3.3 V between P/J165-15 <=> P/J165-3? Replace the LVPS. Go to Step 8. 8 Check the fan rotation signal at the Engine Control Board. Print one sheet. Is there +3.3 V between P/J61-4 <=> P/J61-16? Replace the LV Harness Replace the Engine Control Board. |
| Error code: | 53 |
| Display: | Send Error (SMTP) |
| Description: | The password did not match in a relay or mailbox transmission, and the transmission ended in failure. |
| Causes: | · Loose cable connection · Defective controller fan · Defective IOD1 board · Defective MCTL board |
| Remedy: | Confirm that both parties are using the same system password and the both units are compatible. Then, ask the remote party to transmit again. |
| Error code: | 60 |
| Display: | Nongenuine Toner |
| Description: | Imaging Unit Motor Failure, Code 60 |
| Causes: | • Imaging Unit Drive Motor • Engine Control Board |
| Remedy: | 1 1. Enter service diagnostics and run the Imaging Unit Motor test. 2. Does the motor operate correctly? Go to step 7. Go to step 2. 2 1. Is the voltage at J210-5 +5 VDC? Go to step 3. Replace the engine control board. 3 1. Is the voltage at J210-7 +24 VDC? Go to step 4. Use the +24 VDC wirenets to troubleshoot and resolve the missing voltage. 4 1. Enter service diagnostics. 2. While running the Imaging Unit Motor test, check the voltage at J210-1 and J210-2. 3. Is the voltage 0 VDC while the test is running? Go to step 5. Replace the engine control board. 5 Is the frequency between J210-4 and ground between 1 KHz and 1.3 KHz? Replace the imaging unit drive motor. Go to step 6. 6 1. Check for a short to ground at J210-4. 2. Is the wire grounded? Repair or replace the wiring harness. Replace the engine control board. 7 1. Enter service diagnostics. 2. While running the Imaging Unit Motor test, check the voltage at J210-9. 3. Is the voltage +5 VDC while the test is running? Replace the imaging unit drive motor. Replace the engine control board. |
| Error code: | 61 |
| Display: | Nongenuine Toner Replace Toner 1 |
| Description: | The toner cartridge installed is not a genuine cartridge. |
| Causes: | The printer warms up when the printer is turned on or the cover is closed, or wake from sleep mode. |
| Remedy: | This message appears when you selected stop at the Non Genuine Toner prompt. Install the genuine toner cartridge. |
| Error code: | 70 |
| Display: | No Paper |
| Description: | No Paper |
| Causes: | No paper in the paper cassette. |
| Error code: | 71 |
| Display: | Paper Jam 0 |
| Description: | Paper Jam 0 |
| Causes: | The front part of paper is jammed between pickup unit and Feed sensor. |
| Error code: | 72 |
| Display: | Paper Jam 1 |
| Description: | Engine Firmware Failure The Engine Control Board detected a firmware error. |
| Causes: | • Engine Control Board, Pl9.1.16 • EEPROM Board, PL9.1.12 |
| Remedy: | 1 Cycle printer power. Does the error persist? Go to Step 2. Complete 2 Is P/J144 on the EEPROM Board properly seated and defect free? Go to Step 3. Reseat P/J144 or replace the EEPROM Board. 3 Turn printer power off and then back on. Does the error persist? Replace the Engine Control Board. Complete |
| Error code: | 73 |
| Display: | Paper Jam 2 |
| Description: | Paper Jam 2 |
| Causes: | The front part of paper is jammed just after passing through the discharge sensor. |
| Error code: | 74 |
| Display: | [TRAY x] [PAPER SIZE] EMPTY |
| Description: | F/W Overrun detect |
| Causes: | · Loose cable connection · Defective cleaner clutch · Defective IOD2 board · Defective IOD1 board · Defective MCTL board |
| Remedy: | 1) Check the harness connected between the Engine controller and the TA board. (If the harness is out, insert it to the connector.) 2) Check the harness connected between the TA board and the Pickup unit. (If the harness is out, insert it to the connector.) 3) Check the harness connected between the Pickup unit and the cassette sensing board. (If the harness is out, insert it to the connector.) 4) Check the pickup unit. (If it is inferior part or warped part, replace it.) 5) Check the damage of the cassette sensing B . (If it is damaged, replace the cassette sensing board.) 6) In the Engine diagnostic mode, operate the running count of the paper if it is under 39. (If it is over 39, replace the Pickup unit.) 7) Replace the TA board. |
| Error code: | n01 |
| Display: | NO ATC UNIT |
| Description: | The [ATC] menu item was executed, but no ATC unit is installed. |
| Causes: | Instantaneous excessive load was given to the X-axis. |
| Remedy: | The [ATC] menu item can be executed, only when an ATC unit is installed. After a short interval, the machine automatically returns to the original screen. |
| Error code: | n02 |
| Display: | NOW CATCHING TOOL "ENTER" TO RELEASE |
| Description: | The power was switched on while a tool was in a gripped state. |
| Causes: | Big load has been given to the X-axis continuously. |
| Remedy: | When the power is switched on while a tool is gripped, the tool is released to ensure safety. Pressing the [ENTER] key immediately performs a forced release and clears the error. No operation to return the tool to the magazine is performed, so support the tool with your hand as you perform this operation to keep the tool from being dropped. (1)Press the [ENTER] key. A forced release is performed, and the message [IF TOOL IS RELEASED, THEN PUSH "ENTER"] appears. (2)If the tool was released, then press the [ENTER] key to clear the error. If the tool was not released, then switch off the power. Make sure the air pressure is within the specified range and that no air hoses of cables have come loose, then switch on the power. If the error message appears again, press the [ENTER] key. If this operation fails to release the tool, then contact your Roland DG Corp. service center. If this message does not appear even though a tool is grasped, then immediately switch off the power and contact your Roland DG Corp. service center. |
| Error code: | n03 |
| Display: | NO Z0 SENSOR SET SENSOR THEN ENTER |
| Description: | An attempt was made to carry out automatic measurement of tool length while the Z0 sensor was not connected. |
| Causes: | Big load has been given to the X-axis continuously for a long time. |
| Remedy: | The Z0 sensor is required in order to execute [LENGTH SCAN] (although this is not required when the rotary axis unit is installed). Connect the Z0 sensor, place it on the sensor base, then press the [ENTER] key. The machine clears the error, then restarts measurement. |
| Error code: | n04 |
| Display: | TOOL LENGTH TOO LONG SHORTEN IT AND ENTER |
| Description: | Automatic measurement cannot be performed because the tool is too long. |
| Causes: | Big load has been given to the X-axis continuously. Thermister of the X driver IC is defective. |
| Remedy: | On executing [LENGTH SCAN], if the tool is too long and measurement cannot be performed, this message appears and the tool is returned to the magazine. Replace the tool with one of the specified length, then press the [ENTER] key. The machine clears the error, then restarts measurement. |
| Error code: | n05 |
| Display: | AIR PRESSURE SHORT |
| Description: | Operation was interrupted because the pressure of the compressed air was lower than permitted. |
| Causes: | Instantaneous excessive load was given to the Y-axis. |
| Remedy: | This appears when the pressure of the compressed air is insufficient. First, readjust the air pressure to 0.5 to 0.65 MPa. When the display changes to ["ENTER" TO CONTINUE], press the [ENTER] key. The error is cleared and the operation resumes. |
| Error code: | n06 |
| Display: | AIR PRESSURE TOO HIGH |
| Description: | Operation was interrupted because the pressure of the compressed air was higher than permitted. |
| Causes: | Big load has been given to the Y-axis continuously. |
| Remedy: | This appears when the pressure of the compressed air is excessively high. First, readjust the air pressure to 0.5 to 0.65 MPa. When the display changes to ["ENTER" TO CONTINUE], press the [ENTER] key. The error is cleared and the operation resumes. |
| Error code: | n07 |
| Display: | OPERATING ERROR CAN`T RELEASE TOOL |
| Description: | The tool cannot be released. |
| Causes: | Big load has been given to the Y-axis continuously for a long time. |
| Remedy: | This appears when the grasped tool could not be released for some reason. Switch off the power and make sure the air pressure is within the permitted range. Also make sure that no air hoses or cables have come loose. Switch on the power again. When [NOW CATCHING TOOL "ENTER" TO RELEASE] appears, press the [ENTER] key to try performing a forced release. (Be careful not to let the tool fall at this time.) If this operation fails to release the tool, then contact your Roland DG Corp. service center. |
| Error code: | n08 |
| Display: | Y overheat |
| Description: | Y motor driver becomes too hot. |
| Causes: | Big load has been given to the Y-axis continuously. Thermister of the Y driver IC is defective. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. Replace the Main board. |
| Error code: | n09 |
| Display: | Z overload [peak] |
| Description: | Instantaneous excessive load was given to the Z-axis. |
| Causes: | Instantaneous excessive load was given to the Z-axis. |
| Remedy: | Check if there was no collision. Perform Load check. Check the Ball Thread. |
| Error code: | n10 |
| Display: | Z overload [short] |
| Description: | Big load has been given to the Z-axis continuously. |
| Causes: | Big load has been given to the Z-axis continuously. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. |
| Error code: | n11 |
| Display: | Z overload [long] |
| Description: | Big load has been given to the Z-axis continuously for a long time. |
| Causes: | Big load has been given to the Z-axis continuously for a long time. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. |
| Error code: | n12 |
| Display: | Z overheat |
| Description: | Z motor driver becomes too hot. |
| Causes: | Big load has been given to the Z-axis continuously. Thermister of the Z driver IC is defective. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. Replace the Main board. |
| Error code: | n13 |
| Display: | A overload [peak] |
| Description: | Instantaneous excessive load was given to the A-axis. |
| Causes: | Instantaneous excessive load was given to the A-axis. |
| Remedy: | Check if there was no collision. Perform Load check. Check the Ball Thread. |
