Mimaki UJV-160
Рейтинг
Снят с производства
Тип устройства
Принтер
Технология печати
пьезоэлектрическая струйная
Макс. формат
A0
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Макс. формат |
A0 |
Тип |
струйный |
Технология печати |
пьезоэлектрическая струйная |
Цветность печати |
цветная |
Тип устройства |
Принтер |
Сканер |
|
Факс |
|
Телефон |
|
Копир |
|
Размещение |
напольный |
Принтер |
|
Количество цветов |
4 |
Печать без полей |
|
Двусторонняя печать |
|
Прямая печать |
|
Макс, разрешение для ч/б печати |
|
| По X | 1 200 |
| По Y | 1 200 |
Сканер |
|
Отправка изображения по e-mail |
|
Стандарт WIA |
|
Стандарт TWAIN |
|
Расходные материалы |
|
Количество картриджей |
8 |
Печать на: |
|
| Матовой бумаге |
|
| Рулоне |
|
| Глянцевой бумаге |
|
| Пленках |
|
| CD/DVD |
|
| Карточках |
|
| Этикетках |
|
| Конвертах |
|
Факс |
|
Цветной |
|
Телефон |
|
Спикерфон |
|
Стандарт DECT |
|
Беспроводная трубка |
|
АОН |
|
Caller ID |
|
Автоответчик |
|
Проводная трубка |
|
Языки управления |
|
| PostScript |
|
|
|
|
| PPDS |
|
| PCL 6 |
|
| PostScript 3 |
|
| PostScript 2 |
|
| PCL 5e |
|
| PCL 5c |
|
Финишер |
|
Электронная сортировка |
|
Сортировка со сдвигом |
|
Сортер |
|
Брошюровщик |
|
Степлер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Веб-интерфейс |
|
RS-232 |
|
Ethernet (RJ-45) |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Bluetooth |
|
LPT |
|
Инфракрасный порт |
|
Устройство для чтения карт памяти |
|
USB |
|
Дополнительная информация |
|
Экран |
|
Поддержка ОС |
|
| Windows |
|
Потребляемая мощность |
|
| При работе | 1 680 |
Габариты |
|
Вес |
260 |
Глубина |
780 |
Высота |
120 |
Ширина |
3 300 |
Модули
PLATEN ASSY -1/2
WIPER ASSY
X DRIVE ASSY
ROLL ASSY -1/2
HOT WATER ASSY -2/2
TAKE-UP DEVISE ASSY -2/2
SUPPORT TABLE FRONT ASSY
FORCE FEEDING ASSY -2/2
ELECTRICAL ASSY -1/2
HEAD ASSY -2/4
FORCE FEEDING ASSY -1/2
CARTRIDGE ASSY -1/2
Y BAR ASSY
BEAR ASSY -2/2
Y DRIVE ASSY
HEAD ASSY -4/4
FRAME ASSY -1/2
ROLL ASSY -2/2
PLATEN ASSY -2/2
CARTRIDGE ASSY -2/2
BEAR ASSY -1/2
FRAME ASSY -2/2
Y-UD ASSY -1/2
COVER ASSY -2/2
UV-LED ASSY
COVER ASSY -1/2
TAKE-UP DEVISE ASSY -1/2
FLUSHING TRAY ASSY
CLAMP ASSY
ELECTRICAL ASSY -2/2
HOT WATER ASSY -1/2
INK DISCHARGING ASSY
Y-UD ASSY -2/2
Leg Assy
SUPPORT TABLE REAR ASSY
HEAD ASSY -3/4
HEAD ASSY -1/4
Детали CLAMP ASSY
| Деталь: | Platen cover RV160 assy |
| Парткод: | M008256 |
| Деталь: | Caution label-Temperature |
| Парткод: | M903239 |
| Деталь: | Platen cover F-V160 |
| Парткод: | M510219 |
| Деталь: | Pre-heater connector cable assy |
| Парткод: | E105475 |
| Деталь: | Fix spacer |
| Парткод: | M510445 |
| Деталь: | Wiper fixing BKT |
| Парткод: | M510442 |
| Деталь: | Support plate B |
| Парткод: | M510446 |
| Деталь: | Support plate A |
| Парткод: | M510440 |
| Деталь: | Ink guard plate P |
| Парткод: | M510672 |
| Деталь: | Suction nozzle holder |
| Парткод: | M206117 |
| Деталь: | Suction nozzle 2.5 |
| Парткод: | MP-M601390 |
| Деталь: | Guide Shaft |
| Парткод: | M206097 |
| Деталь: | Up and Down guide BKT |
| Парткод: | M510444 |
| Деталь: | Ink absorber |
| Парткод: | M905842 |
| Деталь: | Absorber holder |
| Парткод: | M602362 |
| Деталь: | Guide Holder |
| Парткод: | M602363 |
| Деталь: | Belt holder |
| Парткод: | M510439 |
| Деталь: | Wiper shaft S |
| Парткод: | M206099 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | Wiper gear flange |
| Парткод: | M503696 |
| Деталь: | Wiper gear S |
| Парткод: | M601055 |
| Деталь: | COLLAR |
| Парткод: | M204204 |
| Деталь: | Tension pulley ST |
| Парткод: | M601393 |
| Деталь: | Wiper tension BKT |
| Парткод: | M510340 |
| Деталь: | STA-WU assy |
| Парткод: | E105244 |
| Деталь: | STA-WU junction cable assy |
| Парткод: | E105242 |
| Деталь: | STEP MOTOR |
| Парткод: | E300513 |
| Деталь: | Station motor gear |
| Парткод: | M400211 |
| Деталь: | Wiper BKT |
| Парткод: | M510441 |
| Деталь: | Wipe absorber |
| Парткод: | M905789 |
| Деталь: | Ink absorber S |
| Парткод: | M905891 |
| Деталь: | Ink guard plate 2 |
| Парткод: | M510736 |
| Деталь: | Wiper rubber holder |
| Парткод: | M510737 |
| Деталь: | Ink wiper rubber |
| Парткод: | SPA-0168 |
| Деталь: | Absorber D1 |
| Парткод: | M906022 |
| Деталь: | Wiper Motor Assy |
| Парткод: | M008348 |
| Деталь: | Wiper BKT Assy |
| Парткод: | M008352 |
| Деталь: | Wiper Assy |
| Парткод: | M008272 |
| Деталь: | Ink guard plate 2 Assy |
| Парткод: | M008822 |
| Деталь: | Wiper Sponge Set |
| Парткод: | SPC-0578 |
| Деталь: | Wiper dog |
| Парткод: | M514114 |
| Деталь: | Wiper dog base |
| Парткод: | M514113 |
| Деталь: | Wiper sensor base |
| Парткод: | M514112 |
| Деталь: | Suction nozzle holder |
| Парткод: | M602454 |
| Деталь: | Suction nozzle 2.5 |
| Парткод: | MP-M602452 |
| Деталь: | Guide Holder |
| Парткод: | M602453 |
| Деталь: | Ink wiper rubber |
| Парткод: | MP-M700536 |
| Деталь: | Sponge holder |
| Парткод: | M513499 |
| Деталь: | TN15-160 pulley |
| Парткод: | M203155 |
| Деталь: | X pulley BKT |
| Парткод: | M508899 |
| Деталь: | XM BKT |
| Парткод: | M508901 |
| Деталь: | X motor pulley |
| Парткод: | M203154 |
| Деталь: | Servo motor assy (X) |
| Парткод: | MP-E300532 |
| Деталь: | X-axis motor extension cable assy |
| Парткод: | E105195 |
| Деталь: | X belt tension SP |
| Парткод: | M800977 |
| Деталь: | X joint shaft P2 |
| Парткод: | M206129 |
| Деталь: | X joint shaft BKT |
| Парткод: | M509862 |
| Деталь: | PF coupling |
| Парткод: | M205126 |
| Деталь: | BR holder 33SL |
| Парткод: | M400347 |
| Деталь: | BR holder 33SL assy |
| Парткод: | M007337 |
| Деталь: | SPF roller V160-ENC |
| Парткод: | M206042 |
| Деталь: | BR holder 33S |
| Парткод: | M400346 |
| Деталь: | BR holder shaft 33 |
| Парткод: | M205617 |
| Деталь: | BR holder 33S assy |
| Парткод: | M007336 |
| Деталь: | M-ENC roller V160 assy |
| Парткод: | M007841 |
| Деталь: | X encoder(3600) assy |
| Парткод: | MP-E105394 |
| Деталь: | X encoder connect cable assy |
| Парткод: | E105340 |
| Деталь: | M-ENC roller V160 assy |
| Парткод: | M008287 |
| Деталь: | X-axis motor assy 33 |
| Парткод: | M007619 |
| Деталь: | Extension bush 38 |
| Парткод: | M601190 |
| Деталь: | Roll shaft collar |
| Парткод: | M201607 |
| Деталь: | Roll base 2(S) |
| Парткод: | M601186 |
| Деталь: | Roll damper BKT |
| Парткод: | M506944 |
| Деталь: | Roll holder shaft L |
| Парткод: | M203641 |
| Деталь: | Roll holder G |
| Парткод: | M600686 |
| Деталь: | Media holder LV2 assy 33 |
| Парткод: | M007897 |
| Деталь: | Adsorption bottle coupling 4.5 |
| Парткод: | M205297 |
| Деталь: | Hot water coupling |
| Парткод: | M206094 |
| Деталь: | Hot water tank lid |
| Парткод: | M206093 |
| Деталь: | FLOAT SWITCH ASSY |
| Парткод: | MP-E105378 |
| Деталь: | Float stick |
| Парткод: | M206096 |
| Деталь: | Float |
| Парткод: | M801090 |
| Деталь: | Rubber packing |
| Парткод: | M700513 |
| Деталь: | Hot water tank (Additional process) |
| Парткод: | M801091 |
| Деталь: | Hot water thermistor assy |
| Парткод: | E105374 |
| Деталь: | Cartridge heater assy |
| Парткод: | E105381 |
| Деталь: | Temperature fuse cable assy |
| Парткод: | MP-E105383 |
| Деталь: | Heater block |
| Парткод: | M206095 |
| Деталь: | Temperature fuse 2 cable assy |
| Парткод: | MP-E105404 |
| Деталь: | Heat insulator |
| Парткод: | M602332 |
| Деталь: | Hot water tank cover |
| Парткод: | M510348 |
| Деталь: | Hot water tank box |
| Парткод: | M510347 |
| Деталь: | Hot water tank base |
| Парткод: | M510349 |
| Деталь: | Heater block thermistor cable assy |
| Парткод: | E105674 |
| Деталь: | Hot water tank lid Assy |
| Парткод: | M008341 |
| Деталь: | Hot water tank base Assy |
| Парткод: | M008342 |
| Деталь: | Hot water tank lid |
| Парткод: | M602461 |
| Деталь: | JV33 take-up right (S) assy |
| Парткод: | M007478 |
| Деталь: | Roll holder |
| Парткод: | M600500 |
| Деталь: | TL shaft S |
| Парткод: | M203685 |
| Деталь: | Roll base 2 (BR) |
| Парткод: | M601185 |
| Деталь: | TL shaft S bracket (S) |
| Парткод: | M504102 |
| Деталь: | TL gear |
| Парткод: | M203683 |
| Деталь: | Extension bush 38 |
| Парткод: | M601190 |
| Деталь: | Take-up motor cable assy |
| Парткод: | E104915 |
| Деталь: | Brushless motor SK |
| Парткод: | MP-E300409 |
| Деталь: | Motor cable SK assy |
| Парткод: | E103232 |
| Деталь: | Take-up motor PCB SK assy |
| Парткод: | MP-E300413 |
| Деталь: | M gear BKT base (S) |
| Парткод: | M504104 |
| Деталь: | M gear BKT (S)-Si |
| Парткод: | M505965 |
| Деталь: | M gear(S) |
| Парткод: | M400235 |
| Деталь: | M gear shaft (S)-Si |
| Парткод: | M204627 |
| Деталь: | Take-up cover(S) |
| Парткод: | M601265 |
| Деталь: | M motor BKT (S)-Si |
| Парткод: | M505966 |
| Деталь: | Take-up motor switch SK assy |
| Парткод: | E103224 |
| Деталь: | Take-up motor junction cable assy |
| Парткод: | E105207 |
| Деталь: | TF-fixing holder L |
| Парткод: | M602385 |
| Деталь: | TF-BKT L |
| Парткод: | M510640 |
| Деталь: | Table frame 2 |
| Парткод: | M206183 |
| Деталь: | HANDLE ASSY |
| Парткод: | M006193 |
| Деталь: | T-BKT2 |
| Парткод: | M510639 |
| Деталь: | ORM holder BKT L |
| Парткод: | M510634 |
| Деталь: | Rigid media holder |
| Парткод: | M206180 |
| Деталь: | ORM holder BKT R |
| Парткод: | M510635 |
| Деталь: | Wheel BKT |
| Парткод: | M510651 |
| Деталь: | URM holder BKT |
| Парткод: | M510644 |
| Деталь: | Table frame 3 |
| Парткод: | M510649 |
| Деталь: | Table frame 1 |
| Парткод: | M206182 |
| Деталь: | TF-fixing holder R |
| Парткод: | M602386 |
| Деталь: | TF-BKT R |
| Парткод: | M510641 |
| Деталь: | T-BKT1 |
| Парткод: | M510638 |
| Деталь: | SW-BOX cover |
| Парткод: | M510637 |
| Деталь: | SW guide |
| Парткод: | M602388 |
| Деталь: | SW-BOX |
| Парткод: | M510636 |
| Деталь: | Support wire |
| Парткод: | M206181 |
| Деталь: | SW fixing guide |
| Парткод: | M602389 |
| Деталь: | Leg guard |
| Парткод: | M510652 |
| Деталь: | Table leg |
| Парткод: | M510650 |
| Деталь: | Table hinge |
| Парткод: | M510646 |
| Деталь: | Table BKT L |
| Парткод: | M510655 |
| Деталь: | Table shaft |
| Парткод: | M206179 |
| Деталь: | Table BKT R |
| Парткод: | M510645 |
| Деталь: | Table stay 2 |
| Парткод: | M510653 |
| Деталь: | Table stay |
| Парткод: | M510656 |
| Деталь: | Caution label-Table |
| Парткод: | M906043 |
| Деталь: | Table right leg Assy |
| Парткод: | M008565 |
| Деталь: | Table left leg Assy |
| Парткод: | M008566 |
| Деталь: | Table frame F Assy |
| Парткод: | M008567 |
| Деталь: | TF-fixing holder L |
| Парткод: | M602508 |
| Деталь: | TF-BKT |
| Парткод: | M511652 |
| Деталь: | ORM holder BKT |
| Парткод: | M511651 |
| Деталь: | Table frame 1 |
| Парткод: | M511648 |
| Деталь: | Table hinge pin |
| Парткод: | M206383 |
| Деталь: | Rigid guide L |
| Парткод: | M511853 |
| Деталь: | SW guide |
| Парткод: | M602510 |
| Деталь: | Support wire |
| Парткод: | 206382 |
| Деталь: | SW fixing guide |
| Парткод: | M602511 |
| Деталь: | SW-BOX |
| Парткод: | M511653 |
| Деталь: | Rigid guide R |
| Парткод: | M511854 |
| Деталь: | Wheel BKT |
| Парткод: | M602507 |
| Деталь: | URM holder BKT |
| Парткод: | M602506 |
| Деталь: | Table frame 2 |
| Парткод: | M511649 |
| Деталь: | Table BKT |
| Парткод: | M511650 |
| Деталь: | Table leg |
| Парткод: | M511646 |
| Деталь: | Table stay |
| Парткод: | M511647 |
| Деталь: | Table frame F assy. |
| Парткод: | MP-M008567 |
| Деталь: | Table leg assy. |
| Парткод: | MP-M009194 |
| Деталь: | Pump PCB (CB) assy |
| Парткод: | MP-E104995 |
| Деталь: | Station PCB assy |
| Парткод: | E105886 |
| Деталь: | Fan PCB (CB) assy |
| Парткод: | E104996 |
| Деталь: | PWM smoothing PCB assy |
| Парткод: | MP-E105312 |
| Деталь: | PWM smoothing PCB connector cable assy |
| Парткод: | E105316 |
| Деталь: | Heater Junction PCB assy |
| Парткод: | MP-E105472 |
| Деталь: | Bottle partition |
| Парткод: | M510457 |
| Деталь: | Adsorption bottle pad 1 |
| Парткод: | M601419 |
| Деталь: | Hot water cable assy |
| Парткод: | E105375 |
| Деталь: | Thermistor extension cable assy |
| Парткод: | E105373 |
| Деталь: | Heater connector cable assy |
| Парткод: | E105380 |
| Деталь: | Thermal fuse connector cable assy |
| Парткод: | E105382 |
| Деталь: | Thermal fuse 2 connector cable assy |
| Парткод: | E105480 |
| Деталь: | POW-HOT junction cable assy |
| Парткод: | E105379 |
| Деталь: | Pre-heater output cable assy |
| Парткод: | E105651 |
| Деталь: | Print heater 2 output cable assy |
| Парткод: | E105477 |
| Деталь: | Print heater 1 output cable assy |
| Парткод: | E105476 |
| Деталь: | Platen thermistor junction cable assy |
| Парткод: | E105479 |
| Деталь: | P-VACUM-FAN-UNIT junction cable assy |
| Парткод: | E105199 |
| Деталь: | Paper tail end and clamp sensor junction cable assy |
| Парткод: | E105197 |
| Деталь: | X encoder connector cable assy |
| Парткод: | E105340 |
| Деталь: | STA-U control cable assy |
| Парткод: | E105240 |
| Деталь: | Float switch connector cable assy |
| Парткод: | E105377 |
| Деталь: | Heater block thermistor connector cable assy |
| Парткод: | E105675 |
| Деталь: | FUSE |
| Парткод: | MP-0216005.MXP |
| Деталь: | P1.25-16-250mm (FFC9, FFC10) |
| Парткод: | MP-E300606 |
| Деталь: | P1.25-16-800mm (FFC7) |
| Парткод: | MP-E300609 |
| Деталь: | P1.25-20-250mm (FFC8) |
| Парткод: | MP-E300777 |
| Деталь: | Cover sensor short assy |
| Парткод: | E104656 |
| Деталь: | Cascade short assy |
| Парткод: | E104655 |
| Деталь: | Take-up motor connector cable assy |
| Парткод: | E105217 |
| Деталь: | Hot water motor cable assy |
| Парткод: | E105375 |
| Деталь: | Adsorption pad D |
| Парткод: | M906029 |
| Деталь: | Thermostat short cable assy |
| Парткод: | E105478 |
| Деталь: | Heater control cable assy |
| Парткод: | E105481 |
| Деталь: | Hot water control cable assy |
| Парткод: | E105372 |
| Деталь: | POW-HOT connector cable assy |
| Парткод: | E105212 |
| Деталь: | FUSE |
| Парткод: | MP-216008.MXP |
| Деталь: | Station PCB assy |
| Парткод: | MP-E104606 |
| Деталь: | Fan PCB (CB) assy |
| Парткод: | MP-E104996 |
| Деталь: | Electrical box |
| Парткод: | M510191 |
| Деталь: | LC PCB BKT |
| Парткод: | M510491 |
| Деталь: | Connector cover (UJ) |
| Парткод: | M510657 |
| Деталь: | USB I/F label (UJ) |
| Парткод: | M906024 |
| Деталь: | Label-AC inlet |
| Парткод: | M906025 |
| Деталь: | Inlet warning label |
| Парткод: | M906031 |
| Деталь: | DC power switch connector cable assy |
| Парткод: | E105181 |
| Деталь: | AC inlet (IP14) assy |
| Парткод: | E105343 |
| Деталь: | SUS plate fixed angle |
| Парткод: | M510616 |
| Деталь: | Electrical box exhaust cover |
| Парткод: | M510362 |
| Деталь: | Electrical box cover |
| Парткод: | M509882 |
| Деталь: | Electrical box exhaust cover S |
| Парткод: | M510680 |
| Деталь: | V-SEL assy |
| Парткод: | E105341 |
| Деталь: | VS extension cable assy |
| Парткод: | E105388 |
| Деталь: | Label-Power switching |
| Парткод: | M905959 |
| Деталь: | Slider (+SPS) PCB assy |
| Парткод: | MP-E105298 |
| Деталь: | Pressure sensor PCB connector cable assy |
| Парткод: | E105309 |
| Деталь: | Head ID and paper width sensor connector cable assy |
| Парткод: | E105219 |
| Деталь: | fushION-POWER CABLE assy |
| Парткод: | E105411 |
| Деталь: | FFC3, FFC4 |
| Парткод: | MP-E300610 |
| Деталь: | Air valve (2x8) unit connector cable assy |
| Парткод: | E105307 |
| Деталь: | Air valve (3x2) unit connector cable assy |
| Парткод: | E105308 |
| Деталь: | P1.0-20-420mm |
| Парткод: | MP-E300776 |
| Деталь: | Slider PCB base |
| Парткод: | M510168 |
| Деталь: | 2 directional multiple (8) air electromagnetic valve |
| Парткод: | MP-E300596 |
| Деталь: | FPC holder S |
| Парткод: | M510160 |
| Деталь: | Y FPC holder |
| Парткод: | M505083 |
| Деталь: | Slider PCB base BKT |
| Парткод: | M510169 |
| Деталь: | Pressure sensor BKT |
| Парткод: | M510179 |
| Деталь: | Positive pressure sensor PCB assy |
| Парткод: | MP-E105304 |
| Деталь: | Negative pressure sensor PCB assy |
| Парткод: | MP-E105303 |
| Деталь: | 3 directional double air electromagnetic valve |
| Парткод: | MP-E300597 |
| Деталь: | Y-origin sensor dog |
| Парткод: | M510182 |
| Деталь: | Head ID PCB assy |
| Парткод: | MP-E103823 |
| Деталь: | 8 ports clamp of base |
| Парткод: | M602413 |
| Деталь: | 8 ports clamp of BKT |
| Парткод: | M510751 |
| Деталь: | 8 ports clamp of sponge |
| Парткод: | M700538 |
| Деталь: | HM diaphragm pump |
| Парткод: | MP-E300589 |
| Деталь: | PUMP-U assy |
| Парткод: | E105246 |
| Деталь: | PUMP-U control cable assy |
| Парткод: | E105245 |
| Деталь: | Pump cover MF |
| Парткод: | M510566 |
| Деталь: | Pump cover R |
| Парткод: | M510565 |
| Деталь: | HJ PCB BKT |
| Парткод: | M510609 |
| Деталь: | Pump cover MR |
| Парткод: | M510577 |
| Деталь: | Pump cover L |
| Парткод: | M510567 |
| Деталь: | Pump base |
| Парткод: | M510453 |
| Деталь: | PN tube 2.54 milky 20M roll |
| Парткод: | MP-PN-4-42.5 |
| Деталь: | Tygon 2075 (46 15m roll) |
| Парткод: | MP-AED001518 |
| Деталь: | 3 directional single air electromagnetic valve |
| Парткод: | MP-E300598 |
| Деталь: | 3 directional single electromagnetic valve connector cable assy |
| Парткод: | E105336 |
| Деталь: | 3 directional valve BKT |
| Парткод: | M510447 |
| Деталь: | Diaphragm fix BKT |
| Парткод: | M510451 |
| Деталь: | Pressure retaining diaphragm pump assy |
| Парткод: | MP-E105337 |
| Деталь: | Filter (for vacuum) |
| Парткод: | MP-VFU3-66P |
| Деталь: | Pump electrical box |
| Парткод: | M510454 |
| Деталь: | Adsorption bottle pad 3 |
| Парткод: | M601421 |
| Деталь: | Adsorption bottle pad 2 |
| Парткод: | M601420 |
| Деталь: | Bottle cap (Additional process) |
| Парткод: | M602323 |
| Деталь: | Adsorption bottle coupling |
| Парткод: | M204277 |
| Деталь: | Pump electrical box cover |
| Парткод: | M510455 |
| Деталь: | Pump electrical box cover S |
| Парткод: | M510456 |
| Деталь: | Filter assy 10 |
| Парткод: | MP-M601405 |
| Деталь: | Black 8ports hose |
| Парткод: | MP-SJ-LTU2.54.55000L |
| Деталь: | Cap nut |
| Парткод: | M205088 |
| Деталь: | O-ring |
| Парткод: | MP-M700408 |
| Деталь: | Tetrafluoride tube o4xo6 black single tube (1m) |
| Парткод: | MP-SJ-LTU 46 |
| Деталь: | PUMP ASSY |
| Парткод: | M009342 |
| Деталь: | PN tube 46 milky 20m roll |
| Парткод: | PN4-6x4 |
| Деталь: | Cartridge top plate |
| Парткод: | M510290 |
| Деталь: | Cartridge support plate |
| Парткод: | M510287 |
| Деталь: | Cartridge base |
| Парткод: | M510285 |
| Деталь: | Cartridge support |
| Парткод: | M510286 |
| Деталь: | Cartridge support S |
| Парткод: | M508017 |
| Деталь: | Cartridge fix spacer |
| Парткод: | M510289 |
| Деталь: | Cartridge PCB assy |
| Парткод: | MP-E105145 |
| Деталь: | Cartridge PCB BKT |
| Парткод: | M510288 |
| Деталь: | Cartridge guide D |
| Парткод: | M601818 |
| Деталь: | Cartridge guide U |
| Парткод: | M601817 |
| Деталь: | Steady brace |
| Парткод: | M508797 |
| Деталь: | CR guide |
| Парткод: | M510450 |
| Деталь: | CR guide |
| Парткод: | M602456 |
| Деталь: | CR box cover F |
| Парткод: | M510449 |
| Деталь: | Belt screw |
| Парткод: | M400284 |
| Деталь: | CR BKT L1-6 |
| Парткод: | M511813 |
| Деталь: | CR BKT L2-6 |
| Парткод: | M511814 |
| Деталь: | CR box cover R |
| Парткод: | M510283 |
| Деталь: | CR BKT R2-6 |
| Парткод: | M511812 |
| Деталь: | CR BKT R1-6 |
| Парткод: | M511811 |
| Деталь: | CR box cover BKT |
| Парткод: | M510448 |
| Деталь: | Cascade short [CT] assy |
| Парткод: | E105215 |
| Деталь: | CR box cover F Assy |
| Парткод: | M008347 |
| Деталь: | Cartridge assy |
| Парткод: | M008273 |
| Деталь: | Y bar V160 |
| Парткод: | M510352 |
| Деталь: | Scale base |
| Парткод: | M508235 |
| Деталь: | Scale SP |
| Парткод: | M800565 |
| Деталь: | Scale holder L |
| Парткод: | M503399 |
| Деталь: | Scale hook |
| Парткод: | M503397 |
| Деталь: | Scale holder |
| Парткод: | M601077 |
| Деталь: | Linear encoder scale JF |
| Парткод: | MP-E300511 |
| Деталь: | Y-bar movable area indicating plate |
| Парткод: | M510661 |
| Деталь: | Scale stopper |
| Парткод: | M602224 |
| Деталь: | Scale base R |
| Парткод: | M503910 |
| Деталь: | Scale holder R |
| Парткод: | M503398 |
| Деталь: | Y bar V160Assy |
| Парткод: | M009228 |
| Деталь: | Y FPC holder |
| Парткод: | M505083 |
| Деталь: | Cable guide L |
| Парткод: | M510329 |
| Деталь: | Bear guide support |
| Парткод: | M510328 |
| Деталь: | Cable guide R |
| Парткод: | M510330 |
| Деталь: | Earth Plate R |
| Парткод: | M510663 |
| Деталь: | Hose 100 m |
| Парткод: | E-PD 46 |
| Деталь: | PN tube 2.54 milky 20M roll |
| Парткод: | PN-4-42.5 |
| Деталь: | Y FPC holder |
| Парткод: | M602413 |
| Деталь: | Tube holder |
| Парткод: | M510751 |
| Деталь: | Tube holder |
| Парткод: | M700538 |
| Деталь: | Y-SP plate |
| Парткод: | M503406 |
| Деталь: | Y-SP |
| Парткод: | M800569 |
| Деталь: | Y-T PULLEY ASSY |
| Парткод: | MP-M006977 |
| Деталь: | Y-T pulley BKT |
| Парткод: | M507315 |
| Деталь: | Y-T fulcrum shaft |
| Парткод: | M202842 |
| Деталь: | Y-T base 33 |
| Парткод: | M508910 |
| Деталь: | Y-axis motor extension cable assy |
| Парткод: | E105196 |
| Деталь: | Y-axis motor assy |
| Парткод: | MP-E300475 |
| Деталь: | DM pulley |
| Парткод: | M202666 |
| Деталь: | Y motor BKT (UJ) |
| Парткод: | M509856 |
| Деталь: | YM spacer 33 |
| Парткод: | M205611 |
| Деталь: | Belt tension SP |
| Парткод: | M800981 |
| Деталь: | D BKT (UJ) |
| Парткод: | M510164 |
| Деталь: | Y DRIVE PULLEY ASSY |
| Парткод: | MP-M006891 |
| Деталь: | YM top plate 33 |
| Парткод: | M508883 |
| Деталь: | D BKT U |
| Парткод: | M502708 |
| Деталь: | Belt holder S |
| Парткод: | M503786 |
| Деталь: | Belt holder 1 |
| Парткод: | M400160 |
| Деталь: | Belt screw |
| Парткод: | M400284 |
| Деталь: | Belt holder |
| Парткод: | M510331 |
| Деталь: | Y drive belt V160-6500 |
| Парткод: | MP-M801070 |
| Деталь: | Y motor assy |
| Парткод: | M008353 |
| Деталь: | Y Drive Assy |
| Парткод: | M008354 |
| Деталь: | Tank cover L |
| Парткод: | M510333 |
| Деталь: | Sub-tank assy |
| Парткод: | MP-M007895 |
| Деталь: | Level detecting magnetic sensor |
| Парткод: | MP-E300599 |
| Деталь: | Tank cover R |
| Парткод: | M510332 |
| Деталь: | Head holder R |
| Парткод: | M510311 |
| Деталь: | Head holder F-2 |
| Парткод: | M510314 |
| Деталь: | H-FPC holder |
| Парткод: | M510312 |
| Деталь: | Head angle TD-2 |
| Парткод: | M206037 |
| Деталь: | Head angle TD-2 |
| Парткод: | M400383 |
| Деталь: | CE4 head |
| Парткод: | MP-KX-CE308644CS-OU-MKP |
| Деталь: | Tube 2075 46 15M roll |
| Парткод: | MP-AED001518 |
| Деталь: | Head holder |
| Парткод: | M206184 |
| Деталь: | Head holder |
| Парткод: | M400401 |
| Деталь: | Sub-tank total assy |
| Парткод: | M008381 |
| Деталь: | Head assy |
| Парткод: | M008386 |
| Деталь: | Cover BKT 2 |
| Парткод: | M509974 |
| Деталь: | X-drive side plate |
| Парткод: | M510163 |
| Деталь: | P side plate L |
| Парткод: | M510218 |
| Деталь: | P side AD L |
| Парткод: | M510215 |
| Деталь: | P side plate AD R |
| Парткод: | M510216 |
| Деталь: | Cover BKT 1 |
| Парткод: | M508778 |
| Деталь: | P side Plate R |
| Парткод: | M510217 |
| Деталь: | Cable guide B |
| Парткод: | M510326 |
| Деталь: | Cable guide B cover |
| Парткод: | M510327 |
| Деталь: | S side plate R |
| Парткод: | M510162 |
| Деталь: | Connector BKT |
| Парткод: | M510158 |
| Деталь: | Ink absorbing felt |
| Парткод: | M907667 |
| Деталь: | Roll holder |
| Парткод: | M600500 |
| Деталь: | Roll holder shaft R |
| Парткод: | M203640 |
| Деталь: | Roll holder gear |
| Парткод: | M601168 |
| Деталь: | Roll damper BKT |
| Парткод: | M506944 |
| Деталь: | Roll base 2(S) |
| Парткод: | M601186 |
| Деталь: | Roll shaft collar |
| Парткод: | M201607 |
| Деталь: | Belt screw |
| Парткод: | M400284 |
| Деталь: | Roll stopper A |
| Парткод: | M601087 |
| Деталь: | Roll stopper S |
| Парткод: | M510157 |
| Деталь: | Roll stopper base |
| Парткод: | M508803 |
| Деталь: | SPRING |
| Парткод: | M800564 |
| Деталь: | Height adjusting pin |
| Парткод: | M203314 |
| Деталь: | Pin guide |
| Парткод: | M601050 |
| Деталь: | Extension bush 38 |
| Парткод: | M601190 |
| Деталь: | Guide cap |
| Парткод: | MP-M602278 |
| Деталь: | Media holder R guide shaft |
| Парткод: | M206039 |
| Деталь: | Bear holder screw |
| Парткод: | M400233 |
| Деталь: | Roll stopper SP2 |
| Парткод: | M800604 |
| Деталь: | Roll stopper L |
| Парткод: | M510156 |
| Деталь: | Roll guide 160 |
| Парткод: | M205988 |
| Деталь: | Caution Label-UJ (hot, small) |
| Парткод: | M906144 |
| Деталь: | Media holder UJ-V1 |
| Парткод: | M510750 |
| Деталь: | Platen C-UJ2160 |
| Парткод: | M301091 |
| Деталь: | P rubber 160 |
| Парткод: | M700473 |
| Деталь: | Print heater 2 assy |
| Парткод: | E105474 |
| Деталь: | Heater holder UJ |
| Парткод: | M510576 |
| Деталь: | Platen adsorption BOX |
| Парткод: | M510571 |
| Деталь: | Gasket P |
| Парткод: | M801076 |
| Деталь: | Platen frame V160-ENC |
| Парткод: | M301086 |
| Деталь: | P sensor angle R |
| Парткод: | M508777 |
| Деталь: | P sensor angle R-UJ |
| Парткод: | M511309 |
| Деталь: | Paper sensor |
| Парткод: | MP-PS-R11L-B |
| Деталь: | Paper tail end and clamp sensor connector cable assy |
| Парткод: | E105198 |
| Деталь: | Platen C BKT |
| Парткод: | M508903 |
| Деталь: | Adsorption fan motor assy |
| Парткод: | MP-E300482 |
| Деталь: | Fan duct V1 |
| Парткод: | M905555 |
| Деталь: | P-VACUME-FAN-UNIT connector cable assy |
| Парткод: | E105200 |
| Деталь: | Cord-shaped heater P160 assy |
| Парткод: | E300669 |
| Деталь: | Platen thermistor P assy |
| Парткод: | E300555 |
| Деталь: | Media holder guide UJ-V1 |
| Парткод: | M206192 |
| Деталь: | Media holder guide UJ-V1 |
| Парткод: | M400400 |
| Деталь: | Print heater 1 connector cable assy |
| Парткод: | E105473 |
| Деталь: | Print heater 2 connector cable assy |
| Парткод: | E105482 |
| Деталь: | P-BRG shaft |
| Парткод: | M206399 |
| Деталь: | P-BRG shaft holder |
| Парткод: | M511756 |
| Деталь: | Bearing (P24 type) |
| Парткод: | L-730ZZ |
| Деталь: | MEDIA HOLDER |
| Парткод: | SPC-0576 |
| Деталь: | PLATEN ASSY |
| Парткод: | M008427 |
| Деталь: | Cartridge frame |
| Парткод: | M600887 |
| Деталь: | Cartridge coupling assy |
| Парткод: | M601427 |
| Деталь: | O-ring |
| Парткод: | MP-M700408 |
| Деталь: | Cap nut |
| Парткод: | M205088 |
| Деталь: | ID contact PCB assy |
| Парткод: | MP-E103704 |
| Деталь: | ID PCB holder |
| Парткод: | M601054 |
| Деталь: | ID contact cable assy |
| Парткод: | E105214 |
| Деталь: | Plate spring C |
| Парткод: | M502166 |
| Деталь: | Cartridge base R P2 (Additional process) |
| Парткод: | M601702 |
| Деталь: | Cartridge base P2 |
| Парткод: | M602455 |
| Деталь: | Cartridge guide 1 |
| Парткод: | M600592 |
| Деталь: | Cartridge guide 1 |
| Парткод: | M602424 |
| Деталь: | Cartridge guide 2 |
| Парткод: | M601486 |
| Деталь: | Cartridge frame Assy |
| Парткод: | M008343 |
| Деталь: | Cartridge guide Assy |
| Парткод: | M008344 |
| Деталь: | Cartridge base R Assy |
| Парткод: | M008345 |
| Деталь: | Cartridge base Assy |
| Парткод: | M008346 |
| Деталь: | Filter assy 10 |
| Парткод: | M601405 |
| Деталь: | Bear guide fixed angle D1 |
| Парткод: | M510679 |
| Деталь: | Bear guide film UJ160 |
| Парткод: | M602314 |
| Деталь: | Cable bear guide |
| Парткод: | M510193 |
| Деталь: | SUS shield plate 2 |
| Парткод: | M510317 |
| Деталь: | Y FPC holder |
| Парткод: | M505083 |
| Деталь: | Tube holder |
| Парткод: | TM-06 |
| Деталь: | Tube holder |
| Парткод: | TM-04 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | Y-origin sensor connector cable assy |
| Парткод: | E105335 |
| Деталь: | Mechanical stopper Y |
| Парткод: | M510183 |
| Деталь: | Bear guide fixed angle |
| Парткод: | M510608 |
| Деталь: | Bear guide side plate L |
| Парткод: | M510177 |
| Деталь: | Cover BKT1 |
| Парткод: | M508778 |
| Деталь: | Bear guide side plate R |
| Парткод: | M510178 |
| Деталь: | UV-LED power cable assy |
| Парткод: | MP-E105317 |
| Деталь: | UV-LED control cable assy |
| Парткод: | MP-E105318 |
| Деталь: | SUS shield plate 1 |
| Парткод: | M510316 |
| Деталь: | Film shield plate 1 |
| Парткод: | M602336 |
| Деталь: | 8 ports clamp of base |
| Парткод: | M602413 |
| Деталь: | 8 ports clamp of BKT |
| Парткод: | M510751 |
| Деталь: | 8 ports clamp of sponge |
| Парткод: | M700538 |
| Деталь: | Center angle 1 |
| Парткод: | M510213 |
| Деталь: | Center angle 2 |
| Парткод: | M510214 |
| Деталь: | Body frame V160 |
| Парткод: | M510324 |
| Деталь: | Center angle assy. |
| Парткод: | M008426 |
| Деталь: | Worm housing cover L |
| Парткод: | M206053 |
| Деталь: | Worm housing cover L |
| Парткод: | M400379 |
| Деталь: | Y bar lifting cam -H15 |
| Парткод: | M205993 |
| Деталь: | Y bar lifting cam -H15 |
| Парткод: | M400385 |
| Деталь: | Y bar lifting cam rotation shaft |
| Парткод: | M206046 |
| Деталь: | Worm gear housing |
| Парткод: | M205946 |
| Деталь: | Worm gear housing |
| Парткод: | M400373 |
| Деталь: | Coupling 1230 |
| Парткод: | M206045 |
| Деталь: | Y bar lifting cam joint shaft 30 |
| Парткод: | M206044 |
| Деталь: | Y bar lifting drive shaft holder |
| Парткод: | M510433 |
| Деталь: | Coupling DS-WG |
| Парткод: | M205945 |
| Деталь: | Worm gear UD |
| Парткод: | M205950 |
| Деталь: | Worm stopper |
| Парткод: | M205951 |
| Деталь: | Worm wheel UD |
| Парткод: | M205949 |
| Деталь: | Worm housing cover R |
| Парткод: | M206052 |
| Деталь: | Worm housing cover R |
| Парткод: | M400378 |
| Деталь: | Y bar lifting drive shaft |
| Парткод: | M206092 |
| Деталь: | Y-UD L Assy |
| Парткод: | M008391 |
| Деталь: | Y-UD R Assy |
| Парткод: | M008392 |
| Деталь: | Y bar lifting cam rotation shaft L Assy |
| Парткод: | M008393 |
| Деталь: | Y bar lifting cam rotation shaft R Assy |
| Парткод: | M008394 |
| Деталь: | Y bar lifting drive shaft holder Assy |
| Парткод: | M008395 |
| Деталь: | HANDLE ASSY |
| Парткод: | M008285 |
| Деталь: | Y bar lifting cam rotation shaft |
| Парткод: | M206390 |
| Деталь: | Y cover MR |
| Парткод: | M510206 |
| Деталь: | Y cover MF-SR |
| Парткод: | M510212 |
| Деталь: | Y cover MF-SL |
| Парткод: | M510205 |
| Деталь: | Label-UVJ-160 |
| Парткод: | M905784 |
| Деталь: | Y cover MF |
| Парткод: | M510204 |
| Деталь: | Cover fixing pad |
| Парткод: | M906010 |
| Деталь: | Caution label-Movable area |
| Парткод: | M906115 |
| Деталь: | Mimaki name plate |
| Парткод: | M602312 |
| Деталь: | Label-The christian era |
| Парткод: | M906027 |
| Деталь: | Label-MODEL-SERIAL No. |
| Парткод: | M906026 |
| Деталь: | Label-Machine name UJV-160 |
| Парткод: | M906003 |
| Деталь: | Cover cap SV |
| Парткод: | M700517 |
| Деталь: | Y cover L |
| Парткод: | M602309 |
| Деталь: | Y cover R |
| Парткод: | M602308 |
| Деталь: | Label-Clamp lever operation |
| Парткод: | M906008 |
| Деталь: | MIMAKI name plate UJ |
| Парткод: | M602403 |
| Деталь: | UV-LED illuminator |
| Парткод: | MP-E300592 |
| Деталь: | UV slider L |
| Парткод: | M510195 |
| Деталь: | Belt screw |
| Парткод: | M400284 |
| Деталь: | UV slider R |
| Парткод: | M510196 |
| Деталь: | Caution label-UV light |
| Парткод: | M905980 |
| Деталь: | UV-LED Unit filter |
| Парткод: | SPC-0575 |
| Деталь: | UV unit Protection glass |
| Парткод: | SPC-0580 |
| Деталь: | LED UV Unit -1 |
| Парткод: | SPC-0638 |
| Деталь: | Cover cap BK |
| Парткод: | M700529 |
| Деталь: | X cover L |
| Парткод: | M602311 |
| Деталь: | Electrical box under cover |
| Парткод: | M510305 |
| Деталь: | XC-SW BKT |
| Парткод: | M510434 |
| Деталь: | KB sheet UJ |
| Парткод: | M905734 |
| Деталь: | KB panel |
| Парткод: | M602132 |
| Деталь: | Keyboard PCB assy |
| Парткод: | MP-E105007 |
| Деталь: | Cover sensor short assy |
| Парткод: | E104656 |
| Деталь: | FFC5 |
| Парткод: | MP-E300604 |
| Деталь: | KEY TOP |
| Парткод: | M602135 |
| Деталь: | Keyboard BKT |
| Парткод: | M510166 |
| Деталь: | X cover R |
| Парткод: | M602310 |
| Деталь: | XC-SW cover |
| Парткод: | M602361 |
| Деталь: | Remote switch (IP14) assy |
| Парткод: | E105397 |
| Деталь: | F-BOX cover F |
| Парткод: | M510154 |
| Деталь: | Heater cover |
| Парткод: | M510574 |
| Деталь: | Caution label-Work |
| Парткод: | M903330 |
| Деталь: | M-BOX cover |
| Парткод: | M510572 |
| Деталь: | Label-Connector (UJ) |
| Парткод: | M906028 |
| Деталь: | Label-Handle rotational direction indication |
| Парткод: | M906009 |
| Деталь: | M-BOX cover S |
| Парткод: | M510573 |
| Деталь: | LCD window |
| Парткод: | M600520 |
| Деталь: | Keyboard BKT-C1 |
| Парткод: | M511611 |
| Деталь: | Roll guide BKT a |
| Парткод: | M509957 |
| Деталь: | Guide cap |
| Парткод: | MP-M602278 |
| Деталь: | Extension bush 38 |
| Парткод: | M601190 |
| Деталь: | Roll base 2 (BR) |
| Парткод: | M601185 |
| Деталь: | HOLDER SHAFT |
| Парткод: | M202118 |
| Деталь: | Roll holder |
| Парткод: | M600500 |
| Деталь: | Roll guide 160 |
| Парткод: | M205988 |
| Деталь: | Roll guide BKT b |
| Парткод: | M509958 |
| Деталь: | Wind-up left (s) v2 assy. 33 |
| Парткод: | M007898 |
| Деталь: | Flushing box cover L |
| Парткод: | M510174 |
| Деталь: | Flushing box cover C |
| Парткод: | M510173 |
| Деталь: | Flushing box cover R |
| Парткод: | M510175 |
| Деталь: | Flushing filter |
| Парткод: | SPC-0577 |
| Деталь: | Flushing mesh |
| Парткод: | M206043 |
| Деталь: | Adsorption pad P2 |
| Парткод: | M602393 |
| Деталь: | Flushing tray |
| Парткод: | M510176 |
| Деталь: | F-BOX cover R |
| Парткод: | M510159 |
| Деталь: | Flushing box guide rail |
| Парткод: | M510172 |
| Деталь: | Bear holder screw |
| Парткод: | M400233 |
| Деталь: | FLUSHING BOX |
| Парткод: | M510171 |
| Деталь: | Adsorption fan motor assy |
| Парткод: | MP-E300482 |
| Деталь: | Flushing fan connector cable assy |
| Парткод: | E105386 |
| Деталь: | Flushing box cover C Assy |
| Парткод: | M008387 |
| Деталь: | FLUSHING BOX ASSY |
| Парткод: | M008388 |
| Деталь: | Clamp bush |
| Парткод: | M600694 |
| Деталь: | Main cam UJ |
| Парткод: | M602306 |
| Деталь: | P holder |
| Парткод: | M509859 |
| Деталь: | P holder shaft (P) |
| Парткод: | M205619 |
| Деталь: | PR shaft (P) |
| Парткод: | M205618 |
| Деталь: | Clamp base (P) |
| Парткод: | M400337 |
| Деталь: | Clamp SP |
| Парткод: | M800979 |
| Деталь: | Pinch roller (EPDM) |
| Парткод: | MP-M700322 |
| Деталь: | CL-B assy L |
| Парткод: | M508809 |
| Деталь: | CL BKT L |
| Парткод: | M508808 |
| Деталь: | Clamp shaft UJ160-S |
| Парткод: | M206041 |
| Деталь: | Clamp shaft BKT-R |
| Парткод: | M510322 |
| Деталь: | Clamp lever UJ |
| Парткод: | M602307 |
| Деталь: | Clamp sensor dog |
| Парткод: | M510221 |
| Деталь: | Paper tail end and clamp sensor connect cable assy |
| Парткод: | E105198 |
| Деталь: | Clamp sensor BKT |
| Парткод: | M510222 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | MP-OJ-6505-N2 |
| Деталь: | Clamp shaft BKT-OS |
| Парткод: | M510155 |
| Деталь: | Clamp lever |
| Парткод: | M602117 |
| Деталь: | Clamp lever OS |
| Парткод: | M510323 |
| Деталь: | Clamp lever OS cover |
| Парткод: | M510225 |
| Деталь: | Clamp SP5-1630 |
| Парткод: | M800899 |
| Деталь: | Clamp lever OS |
| Парткод: | M511666 |
| Деталь: | Clamp lever OS cover |
| Парткод: | M511667 |
| Деталь: | Power PCB assy 250SP packing Assy. (for only maintenance) |
| Парткод: | M013516 |
| Деталь: | Power PCB assy 250SP |
| Парткод: | MP-E300442 |
| Деталь: | Electric partition |
| Парткод: | M510192 |
| Деталь: | TA-UVPOW connector cable assy |
| Парткод: | E105255 |
| Деталь: | AC-JUNCTION assy |
| Парткод: | E105182 |
| Деталь: | Switching power (24V) |
| Парткод: | MP-HWS600-24/PV |
| Деталь: | Switching power (24V) |
| Парткод: | HWS300-24/PV |
| Деталь: | UV-LED control PCB |
| Парткод: | MP-E300591 |
| Деталь: | SL-Relay (IP14) PCB assy |
| Парткод: | MP-E105366 |
| Деталь: | Spacer (for main PCB) |
| Парткод: | M510617 |
| Деталь: | FFC2 |
| Парткод: | MP-E300605 |
| Деталь: | Main (IP14) PCB assy |
| Парткод: | MP-E105299 |
| Деталь: | UV-LED 232C I/F junction cable assy |
| Парткод: | E105461 |
| Деталь: | FFC6 |
| Парткод: | MP-E300608 |
| Деталь: | Y-axis drive cable assy |
| Парткод: | E105194 |
| Деталь: | X-axis drive cable assy |
| Парткод: | E105193 |
| Деталь: | Short connector 24 assy |
| Парткод: | E105339 |
| Деталь: | DC cable (IP14) assy |
| Парткод: | E105384 |
| Деталь: | PRAM (256MB) PCB assy |
| Парткод: | MP-E104595 |
| Деталь: | UV-LED DIO cable assy |
| Парткод: | E105395 |
| Деталь: | UV-LED power supply control cable assy |
| Парткод: | E105322 |
| Деталь: | UV-LED+20V adjuster cable assy |
| Парткод: | E105326 |
| Деталь: | UV-LED power supply cable assy |
| Парткод: | E105321 |
| Деталь: | POW-HOT output cable assy |
| Парткод: | E105213 |
| Деталь: | Flushing fan output cable assy |
| Парткод: | E105385 |
| Деталь: | FPC ferrite core |
| Парткод: | E300591 |
| Деталь: | FERRITE CORE |
| Парткод: | E105366 |
| Деталь: | UV-LED 232C I/F cable assy |
| Парткод: | E105324 |
| Деталь: | Level convert PCB assy |
| Парткод: | MP-E105452 |
| Деталь: | Mini-fitting |
| Парткод: | VRF406 |
| Деталь: | Mini-fitting |
| Парткод: | VRM406 |
| Деталь: | Flexible fluorine hose 100m |
| Парткод: | E-PD 46 |
| Деталь: | Hot water gear cover |
| Парткод: | M506543 |
| Деталь: | Hot water tube BKT |
| Парткод: | M510564 |
| Деталь: | Hot water pump cassette base |
| Парткод: | M505216 |
| Деталь: | PUMP GEAR |
| Парткод: | M400216 |
| Деталь: | Hot water pump base |
| Парткод: | M510350 |
| Деталь: | GEAR 24 |
| Парткод: | M601073 |
| Деталь: | Hot water motor junction cable assy |
| Парткод: | E105376 |
| Деталь: | STEP MOTOR |
| Парткод: | MP-E300513 |
| Деталь: | Hot water box cover |
| Парткод: | M510471 |
| Деталь: | Hot water box |
| Парткод: | M510470 |
| Деталь: | Hot water tube fixing plate |
| Парткод: | M510351 |
| Деталь: | Hot water slide BKT L |
| Парткод: | M510473 |
| Деталь: | Hot water slide BKT R |
| Парткод: | M510472 |
| Деталь: | Caution label-Temperature |
| Парткод: | M903239 |
| Деталь: | Hot water pump motor Assy |
| Парткод: | MP-M008339 |
| Деталь: | Hot water pump base Assy |
| Парткод: | M008340 |
| Деталь: | Hot water box Assy |
| Парткод: | M008274 |
| Деталь: | Hot water supply pump |
| Парткод: | M801306 |
| Деталь: | Ink absorption sponge |
| Парткод: | M906097 |
| Деталь: | Ink soak pad sponge tray |
| Парткод: | M511044 |
| Деталь: | Ink soak pad sponge cover |
| Парткод: | M511045 |
| Деталь: | Waste tank |
| Парткод: | SPC-0579 |
| Деталь: | Waste ink tray |
| Парткод: | M510180 |
| Деталь: | CORD COVER |
| Парткод: | M509995 |
| Деталь: | Waste tank cover Assy |
| Парткод: | M008562 |
| Деталь: | Waste ink tray BKT-C |
| Парткод: | M511610 |
| Деталь: | Y bar BKT L |
| Парткод: | M206116 |
| Деталь: | Y bar BKT L |
| Парткод: | M400376 |
| Деталь: | Bear guide fixed angle |
| Парткод: | M510608 |
| Деталь: | Bear guide fixed angle D1 |
| Парткод: | M510679 |
| Деталь: | Y bar BKT R |
| Парткод: | M206115 |
| Деталь: | Y bar BKT R |
| Парткод: | M400375 |
| Деталь: | Y-bar movable area indicating plate |
| Парткод: | M510662 |
| Деталь: | Label-Y bar movable area indication |
| Парткод: | M906032 |
| Деталь: | Leg side plate L |
| Парткод: | M510684 |
| Деталь: | Left leg A-1 |
| Парткод: | M510740 |
| Деталь: | 160 plate stay |
| Парткод: | M509959 |
| Деталь: | Leg side plate R |
| Парткод: | M510685 |
| Деталь: | Right Leg A-1 |
| Парткод: | M510739 |
| Деталь: | T-BKT1 |
| Парткод: | M510638 |
| Деталь: | TR-fixing holder |
| Парткод: | M602387 |
| Деталь: | TR-BKT L |
| Парткод: | M510642 |
| Деталь: | HANDLE ASSY |
| Парткод: | M006193 |
| Деталь: | Table frame 2 |
| Парткод: | M206183 |
| Деталь: | Wheel BKT |
| Парткод: | M510651 |
| Деталь: | URM holder BKT |
| Парткод: | M510644 |
| Деталь: | SW-BOX cover |
| Парткод: | M510637 |
| Деталь: | Support wire |
| Парткод: | M206181 |
| Деталь: | SW-BOX |
| Парткод: | M510636 |
| Деталь: | SW fixing guide |
| Парткод: | M602389 |
| Деталь: | SW guide |
| Парткод: | M602388 |
| Деталь: | Table frame 3 |
| Парткод: | M510649 |
| Деталь: | Table frame 1 |
| Парткод: | M206182 |
| Деталь: | T-BKT2 |
| Парткод: | M510639 |
| Деталь: | TR-BKT R |
| Парткод: | M510643 |
| Деталь: | Table shaft |
| Парткод: | M206179 |
| Деталь: | Table BKT R |
| Парткод: | M510645 |
| Деталь: | Leg guard |
| Парткод: | M510652 |
| Деталь: | Table hinge |
| Парткод: | M510646 |
| Деталь: | Table stay 2 |
| Парткод: | M510653 |
| Деталь: | Table leg |
| Парткод: | M510650 |
| Деталь: | Table BKT L |
| Парткод: | M510655 |
| Деталь: | Caution label-Table |
| Парткод: | M906043 |
| Деталь: | Table right leg Assy |
| Парткод: | M008565 |
| Деталь: | Table left leg Assy |
| Парткод: | M008566 |
| Деталь: | Table frame R Assy |
| Парткод: | MP-M008625 |
| Деталь: | Table frame 1 |
| Парткод: | M511648 |
| Деталь: | Table hinge pin |
| Парткод: | M206383 |
| Деталь: | TR-fixing holder |
| Парткод: | M602509 |
| Деталь: | Support wire |
| Парткод: | M206382 |
| Деталь: | SW fixing guide |
| Парткод: | M602511 |
| Деталь: | SW-BOX |
| Парткод: | M511653 |
| Деталь: | SW guide |
| Парткод: | M602510 |
| Деталь: | Wheel BKT |
| Парткод: | M602507 |
| Деталь: | URM holder BKT |
| Парткод: | M602506 |
| Деталь: | Table frame 2 |
| Парткод: | M511649 |
| Деталь: | Table BKT |
| Парткод: | M511650 |
| Деталь: | Table leg |
| Парткод: | M511646 |
| Деталь: | Table stay |
| Парткод: | M511647 |
| Деталь: | Table frame R assy. |
| Парткод: | MP-M008625 |
| Деталь: | Table leg assy. |
| Парткод: | MP-M009194 |
| Деталь: | Tygon 2275 3.186.35 |
| Парткод: | MP-AER00007 |
| Деталь: | Head unit base |
| Парткод: | M206036 |
| Деталь: | Head unit base |
| Парткод: | M400382 |
| Деталь: | Head angle plate spring |
| Парткод: | M510313 |
| Деталь: | Adjuster TD |
| Парткод: | M206034 |
| Деталь: | Adjuster TD |
| Парткод: | M400381 |
| Деталь: | AD base |
| Парткод: | M206033 |
| Деталь: | AD base |
| Парткод: | M602365 |
| Деталь: | Spring plunger holder |
| Парткод: | M205548 |
| Деталь: | L sensor BKT |
| Парткод: | M510150 |
| Деталь: | 150LPI encoder PCB assy |
| Парткод: | MP-E103852 |
| Деталь: | Linear encoder PCB connector cable (IP14) assy |
| Парткод: | E105387 |
| Деталь: | Head unit base HS |
| Парткод: | M206098 |
| Деталь: | Head unit base HS |
| Парткод: | M400384 |
| Деталь: | Head unit base Assy |
| Парткод: | M008384 |
| Деталь: | Head unit base HS Assy |
| Парткод: | M008385 |
| Деталь: | Plunger holder Assy |
| Парткод: | M008383 |
| Деталь: | AD base Assy |
| Парткод: | M008382 |
| Деталь: | Head total Assy |
| Парткод: | M008631 |
| Деталь: | Head Unit Total Assy |
| Парткод: | M008380 |
| Деталь: | Slider PCB cover |
| Парткод: | M510167 |
| Деталь: | Photo sensor ROHS |
| Парткод: | MP-SG113 |
| Деталь: | Head ID and paper width sensor connector cable assy |
| Парткод: | E105219 |
| Деталь: | Paper width sensor BKT-P3C |
| Парткод: | M511543 |
| Деталь: | Paper sensor cover |
| Парткод: | M510628 |
| Деталь: | UV lamp cover L-P4 |
| Парткод: | M510658 |
| Деталь: | UV shade curtain L-P2 |
| Парткод: | MP-M510627 |
| Деталь: | UV shade curtain S-P2 |
| Парткод: | MP-M510626 |
| Деталь: | Height adjusting pin |
| Парткод: | M203314 |
| Деталь: | Pin guide |
| Парткод: | M601050 |
| Деталь: | Height adjusting pin BKT-P3 |
| Парткод: | M510622 |
| Деталь: | UV lamp cover R-P4 |
| Парткод: | M510659 |
| Деталь: | Head cover P3 |
| Парткод: | M510623 |
| Деталь: | SPRING |
| Парткод: | M800564 |
| Деталь: | Pin guide Assy |
| Парткод: | M008410 |
| Деталь: | Head Unit Total Assy |
| Парткод: | M008380 |
Коды ошибок
03
04
06
07
08
09
10
11
12
148
149
150
151
200
25
251
260
261
30
34
40
41
42
43
46
50
51
53
55
71
72
73
75
90
92
999
E70
E71
n01
n02
n03
n04
n05
n06
n07
n08
n09
n10
n11
n12
n13
n14
n15
n16
n17
n18
n19
n20
n21
n22
n23
n24
n25
n26
n27
n28
Описание
| Error code: | 03 |
| Display: | WARNING RIBBON IN |
| Description: | The ERROR light flashes. |
| Causes: | Ribbon is loaded, but the printer is set for direct thermal mode. |
| Remedy: | Ribbon is not required with direct thermal media. If you are using direct thermal media, remove the ribbon. This error message will not affect printing. If you are using thermal transfer media, which requires ribbon, set the printer for Thermal Transfer mode. See Select Print Method on page 81. |
| Error code: | 04 |
| Display: | ERROR CONDITION PAPER OUT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The media is not loaded or is loaded incorrectly. Misaligned media sensor. The printer is set for noncontinuous media, but continuous media is loaded. |
| Remedy: | Load media correctly. See Load Media on page 58. Check position of the media sensor. Install proper media type, or reset printer for current media type and perform calibration. |
| Error code: | 06 |
| Display: | THERMISTOR FAULT |
| Description: | The ERROR light flashes. |
| Causes: | The printhead has a faulty thermistor. |
| Remedy: | Replace the printhead. |
| Error code: | 07 |
| Display: | WARNING HEAD COLD, THERMISTOR FAULT, ERROR CONDITION HEAD ELEMENT BAD |
| Description: | The printer stops; the ERROR light is on; the printer cycles through these three messages. |
| Causes: | The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 08 |
| Display: | WARNING HEAD COLD |
| Description: | The printer prints while the ERROR light flashes. |
| Causes: | The printhead temperature is approaching its lower operating limit. The printhead data cable is not properly connected. The printhead has a faulty thermistor. |
| Remedy: | Continue printing while the printhead reaches the correct operating temperature. If the error remains, the environment may be too cold for proper printing. Relocate the printer to a warmer area. Caution • Turn off (O) the printer before performing this procedure. Failure to do so can damage the printhead. 1. Turn off (O) the printer. 2. Disconnect and reconnect the data cable to the printhead. 3. Ensure that the cable connector is fully inserted into the printhead connector. 4. Turn on (I) the printer. Replace the printhead. |
| Error code: | 09 |
| Display: | WARNING HEAD TOO HOT |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | The printhead is over temperature. |
| Remedy: | Allow the printer to cool. Printing automatically resumes when the printhead elements cool to an acceptable operating temperature. |
| Error code: | 10 |
| Display: | DEFRAGMENTING |
| Description: | The printer stops. |
| Causes: | The printer is defragmenting memory. |
| Remedy: | Caution • Do NOT turn off the printer power during defragmenting. Doing so can damage the printer. Allow the printer to finish defragmenting. If you get this error message frequently, check your label formats. Formats that write to and erase memory frequently may cause the printer to defragment often. Using properly coded label formats usually minimizes the need for defragmenting. If this error message does not go away, contact Technical Support. The printer requires service. |
| Error code: | 11 |
| Display: | ERROR CONDITION CUTTER JAM |
| Description: | The printer stops; the ERROR light flashes. |
| Causes: | Caution • The cutter blade is sharp. Do not touch or rub the blade with your fingers. The cutter blade is in the media path. |
| Remedy: | Turn off the printer power and unplug the printer. Inspect the cutter module for debris and clean as needed following the cleaning instructions in Clean the Cutter Module on page 135. |
| Error code: | 12 |
| Description: | General print quality issues |
| Causes: | The printer is set at the incorrect print speed. You are using an incorrect combination of labels and ribbon for your application. The printer is set at an incorrect darkness level. The printhead is dirty. Incorrect or uneven printhead pressure. The printhead is improperly balanced. |
| Remedy: | For optimal print quality, set the print speed to the lowest possible setting for your application via control panel, the driver, or the software. See Adjust Print Speed on page 79. You may want to perform the FEED Self Test on page 120. 1. Switch to a different type of media or ribbon to try to find a compatible combination. 2. If necessary, consult your authorized Zebra reseller or distributor for information and advice. For optimal print quality, set the darkness to the lowest possible setting for your application via the control panel, the driver, or the software. See Adjust Print Darkness on page 78. You may want to perform the FEED Self Test on page 120 to determine the ideal darkness setting. Clean the printhead. See Clean the Printhead and Platen Roller on page 131. Set the printhead pressure to the minimum needed for good print quality. See Adjust Printhead Pressure on page 70. Adjust the printhead balance. |
| Error code: | 148 |
| Display: | ERROR 148 FLT MOTION :MMCCYYKK |
| Description: | Motor |
| Remedy: | ITU belt motor, unable to lock - go to “148 error code” on page 2-57. |
| Error code: | 149 |
| Display: | ERROR 149 INK UPSTREAM GRD |
| Description: | Ink back-flow preventing process executed. When Ink is filled within Sub-tank more than Fluid level high-sensor, Guard process turning to Positive pressure and pushing back Ink is executed. After executed, this error is indicated then the system is down. |
| Error code: | 150 |
| Display: | ERROR 150 POSI.PRS.SENSOR NG |
| Description: | Close Front Door The Interlock Switch indicates that Door A or B is open. |
| Causes: | • Front Cover, PL1.1.6 • Interlock Switch, PL9.1.11 • LVPS, PL9.1.6 • LV Harness, PL10.1.2 |
| Remedy: | 1 Check the following for evidence of fault or damage: • Front Cover, PL1.1.6 • Interlock Switch, PL9.1.11 Replace any damaged parts. Go to Step 2. 2 Test the Interlock Switch. Run the Service Diagnostics Interlock Switch test. Does the switch function correctly? Replace the Engine Control Board. Go to Step 3. 3 Check the Interlock Switch for +5 V. 1. Close the Interlock Switch while testing. 2. Disconnect P/J161 and P/J163. Does P/J161-1 <=> P/J163-2 = +5 V? Does P/J161-3 <=> P/J163-2 = +5 V? Go to Step 4 Replace the Interlock Switch. 4 Check the Interlock open signal. Disconnect P/J61. Does J61-8 <=> J61-16 = 0 V? Replace the Engine Control Board. Go to Step 5. 5 Check the LVPS. Disconnect P/J165. Does J165-11 <=> J165-3 = 0 V? Replace the LV Harness. Replace the LVP |
| Error code: | 151 |
| Display: | ERROR 151 POSI.PRS KEEP OVER |
| Description: | Dusty Density Sensor The printer detects an accumulation of dust on the CTD (ADC) Sensor. |
| Causes: | • CTD (ADC) Sensor, PL5.2.19 • FSR/ADC Harness, PL5.2.28 |
| Remedy: | 1 Clean the CTD (ADC) Sensor. Does the error persist? Go to Step 2. Complete 2 Check the following for evidence of fault or damage: • Transfer Roller Assembly, PL5.1.4 • CTD (ADC) Sensor, PL5.2.19 Replace the damaged parts. Go to Step 3. 3 Check the CTD (ADC) Sensor connection. Is P/J136 connected to the harness? Go to Step 4. Reconnect the sensor. 4 Replace the CTD (ADC) Sensor. Does the error persist? Go to Step 5. Complete. 5 Check all pins on the FSR/ADC Harness PL5.2.28 for continuity. 1. Disconnect P/J36 and P/J136. 2. Check continuity between J36 <=> J136. Go to Step 6. Replace the FSR/ ADC Harness. 6 Check the CTD (ADC) Sensor signal. Disconnect P/J136. Does P136-4 <=> P136-1 = 0 V? Replace the CTD (ADC) Sensor. Replace the Engine Control Board. |
| Error code: | 200 |
| Display: | ERROR 200 HEAD ROM WR |
| Description: | PU F/W download check SUM error (Reserved) |
| Causes: | • Defective maintenance unit home position sensor • Defective maintenance unit drive motor |
| Remedy: | 1. Replace the maintenance unit home position sensor. 2. Replace the maintenance unit drive motor. 3. Replace the maintenance unit. |
| Error code: | 25 |
| Description: | A label format was sent to the printer. Several labels print, then the printer skips, misplaces, misses, or distorts the image on the label. |
| Causes: | The serial communication settings are incorrect. |
| Remedy: | Ensure that the flow control settings match. Check the communication cable length. See Table 5 on page 48 for requirements. Check the printer driver or software communications settings (if applicable). |
| Error code: | 251 |
| Display: | SVC 251 ERROR |
| Description: | DMA circuit cut-in error |
| Causes: | • Disconnected or defective harness to synchronizing detector for start position • Defective laser synchronizing detector for start position • Defective LDB |
| Remedy: | Replace the Controller board. |
| Error code: | 260 |
| Display: | ERROR 260 FLT CONNECT[12345678] |
| Description: | Laser synchronizing detection error: End position [C]. The laser synchronizing detection signal for the end position of LDB [Y], [M], [C] or [K] is not detected when detecting the main scan length. |
| Causes: | • Disconnected or defective harness to synchronizing detector for end position • Defective synchronizing detector board for end position |
| Remedy: | 1. Check the harness connection to the laser synchronizing detector. 2. Replace the laser synchronizing detector for end position. |
| Error code: | 261 |
| Display: | ERROR 261 HDC/ADC |
| Description: | Laser synchronizing detection error: End position [K]. The laser synchronizing detection signal for the end position of LDB [Y], [M], [C] or [K] is not detected when detecting the main scan length. |
| Causes: | • Disconnected or defective harness to synchronizing detector for end position • Defective synchronizing detector board for end position |
| Remedy: | 1. Check the harness connection to the laser synchronizing detector. 2. Replace the laser synchronizing detector for end position. |
| Error code: | 30 |
| Description: | The LCD displays a language that I cannot read |
| Causes: | The language parameter was changed through the control panel or a firmware command. |
| Remedy: | 1. Press SETUP/EXIT to enter configuration mode. 2. Press MINUS (-). The printer displays the LANGUAGE parameter in the current language. Even if you cannot recognize the characters displayed, you can still scroll to another language. 3. Press SELECT to select the parameter. 4. Press PLUS (+) or MINUS (-) to scroll through the choices until you find a language that you can read. 5. Press SETUP/EXIT. The LCD displays SAVE CHANGES in the original language. 6. Press SETUP/EXIT again to exit configuration mode and save the changes (if the language does not change, you may need to scroll to a different save option by pressing PLUS (+) or MINUS (-) in the previous step). 7. Repeat this process, if necessary, until you reach the desired language. |
| Error code: | 34 |
| Description: | Non-continuous labels are being treated as continuous labels. |
| Causes: | The printer was not calibrated for the media being used. The printer is configured for continuous media. |
| Remedy: | Perform the calibration procedure in Calibrate Media and Ribbon Sensor Sensitivity on page 90. Set the media type to noncontinuous media. See Set Media Type on page 81. |
| Error code: | 40 |
| Display: | Scanner locked |
| Description: | 10-348 ERROR 40 FUSER MAIN LAMP FAILURE Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault, Clear <10-348 & 10-350> is run. |
| Causes: | 1. Deformed paper sensor actuator or faulty sensor. 2. SMPS PBA or Main PBA is defective 3. Faulty cables or connectors. |
| Remedy: | Switch printer power OFF. Remove the Fuser Assembly. Warning Fuser may be very hot. Use extreme caution to prevent burns. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Replace the Engine Control Board. |
| Error code: | 41 |
| Display: | Self Diagnostic LSU |
| Description: | Install or Reseat Fuser, Code 41 Front thermistor open error. This is a cold condition. Note If this failure reoccurs three times successively, an Engine NVRAM value is set preventing further printer use until the Clear Tech Rep Fault is performed. |
| Causes: | • Fuser • Engine Control Board |
| Remedy: | 1 1. Turn OFF power and remove the Fuser Assembly. 2. Measure the resistance between the fuser connector P600-4 and P600-6. 3. Does the resistance measure between 30 K and 190 K Ohms? Go to step 2. Replace the fuser assembly. 2 1. Reinstall the fuser assembly. 2. Enter service diagnostics. 3. From the Sensor Tests run the Fuser Temperature test. 4. Is the temperature indicated approximately 165o C? Replace the engine control board. Go to step 3. 3 1. Turn OFF printer power. 2. Check for an open circuit or poor connection between J600-4 to J600-6 to J404A-2. 3. Is the wiring OK? Replace the engine control board. Repair or replace the wiring harness. |
| Error code: | 42 |
| Display: | Self Diagnostic Temperature |
| Description: | 10-352 ERROR 42 FUSER STS (FRONT) WARM TIME FAILURE |
| Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. The tab on the front cover may be damaged or broken 3. Check the connector and cables between Switch and main PBA. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 43 |
| Display: | Send Error (AUTH) |
| Description: | 10-353 ERROR 43 FUSER SSR1 ON TIME FAILURE |
| Causes: | 1. The ‘Open Cover’ microswitch may be stuck or faulty 2. Check the connector and cables between Switch and main PBA. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-4 and P600-6. Does the resistance measure between 20K and 100K ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-1 and P404A-2 on the Engine Control Board. Does the resistance measure between 20K and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 46 |
| Display: | Send Error (SMTP) |
| Description: | 10-354 ERROR 46 FUSER STS (REAR) WARM TIME FAILURE |
| Causes: | 1. Check stability of 24V supply to LSU. |
| Remedy: | Measure the resistance between the Fuser Assembly connector P600-1 and P600-3. Does the resistance measure approximately 6 ohms for a 110 VAC Fuser or approximately 20 ohms for a 220 VAC Fuser? Y↓N→ Replace the Fuser Assembly. Measure the resistance between the Fuser Assembly connector P600-7 and P600-9. Does the resistance measure between 20 ohms and 100 ohms? Y↓N→ Replace the Fuser Assembly. Reinstall Fuser. Remove the Rear Cover, Rear Shield and the Rear Shield Bracket. Measure the resistance between P404A-3 and P404A-4 on the Engine Control Board. Does the resistance measure between 20K ohms and 100K ohms? Y↓N→ Repair or replace the wiring harness between the Engine Control Board and the Fuser. Reinstall the Fuser. Switch printer power ON. Does the Fuser get warm? Y↓N→ Replace the Chassis AC Power Assembly. Replace the Engine Control Board. |
| Error code: | 50 |
| Display: | Tray 2 Paper Empty |
| Description: | Fuser Fan Failure The Fuser Fan rotation signal indicates to the Engine Control Board that the fan is no longer operational. |
| Causes: | • Fuser Fan, PL5.3.31 • FAN/PHD/MOT Harness, PL10.1.9 • Engine Control Board, PL9.1.16 |
| Remedy: | 1 Check the Fuser Fan for damage. Remove the Front Cover. Is the fan damaged? Replace the Fuser Fan. Go to Step 2. 2 Check the Fuser Fan connection. Is P/J482 connected to the harness? Go to Step 2. Reconnect the Fan. 3 Check orientation of the Fuser Fan. Does the Fan’s label face into the chute? Go to Step 3. Correct the installation. 4 Test the Fuser Fan. Run the Service Diagnostics Fuser Fan test. Does the Fan operate. Go to Step 6. Go to Step 5. 5 Check all pins on the FAN/PHD/MOT Harness PL10.1.9 for continuity. 1. Disconnect P/J48 and P/J482. 2. Check continuity between J48 <=> P483. Go to Step 5. Replace the FAN/PHD/MOT Harness. 6 Check the fan rotation signal. Print one sheet. Is there +3.3 V across P/J48-A12 <=> P/J48-A13? Replace the Engine Control Board. Replace the Fuser Fan. |
| Error code: | 51 |
| Display: | Send Error (DNS) |
| Description: | Rear Fan Failure The Rear Fan rotation signal indicates the fan is no longer operational. |
| Causes: | • Rear Fan, PL1.1.19 • LVPS, PL9.1.6 • Engine Control Board, PL9.1.16 • LV Harness, PL10.1.2 |
| Remedy: | 1 Check the Rear Fan for damage. Remove the Rear Cover. Is the fan damaged? Replace the Rear Fan. Go to Step 2. 2 Check the Rear Fan connection. Is P/J166 connected to the harness? Go to Step 3. Connect the Fan. 3 Check orientation of the Rear Fan. Does the Fan’s label face inwards? Go to Step 4. Correct the installation. 4 Test the Rear Fan. Run the Service Diagnostics Rear Fan test. Does the fan operate? Go to Step 6. Go to Step 5. 5 Check for +24 V to the fan. Disconnect P/J166. Is there +24 V across P166-1 <=> P166-3? Replace the Rear Fan. Replace the LVPS. 6 Check the fan rotation signal to the LVPS. Print one sheet. Is there +3.3 V between P/J166-1 <=> P/J166-3? Replace the Fuser Fan. Go to Step 7. 7 Check the rotation signal from the LVPS. Print one sheet. Is there +3.3 V between P/J165-15 <=> P/J165-3? Replace the LVPS. Go to Step 8. 8 Check the fan rotation signal at the Engine Control Board. Print one sheet. Is there +3.3 V between P/J61-4 <=> P/J61-16? Replace the LV Harness Replace the Engine Control Board. |
| Error code: | 53 |
| Display: | Send Error (SMTP) |
| Description: | The password did not match in a relay or mailbox transmission, and the transmission ended in failure. |
| Causes: | · Loose cable connection · Defective controller fan · Defective IOD1 board · Defective MCTL board |
| Remedy: | Confirm that both parties are using the same system password and the both units are compatible. Then, ask the remote party to transmit again. |
| Error code: | 55 |
| Display: | [Stop Pressed] |
| Description: | Stop/Clear has been pressed during a fax transmission. |
| Causes: | · Loose cable connection · Defective fusing unit fan · Defective IOD1 board · Defective MCTL board |
| Remedy: | Try again. |
| Error code: | 71 |
| Display: | Paper Jam 0 |
| Description: | Paper Jam 0 |
| Causes: | The front part of paper is jammed between pickup unit and Feed sensor. |
| Error code: | 72 |
| Display: | Paper Jam 1 |
| Description: | Engine Firmware Failure The Engine Control Board detected a firmware error. |
| Causes: | • Engine Control Board, Pl9.1.16 • EEPROM Board, PL9.1.12 |
| Remedy: | 1 Cycle printer power. Does the error persist? Go to Step 2. Complete 2 Is P/J144 on the EEPROM Board properly seated and defect free? Go to Step 3. Reseat P/J144 or replace the EEPROM Board. 3 Turn printer power off and then back on. Does the error persist? Replace the Engine Control Board. Complete |
| Error code: | 73 |
| Display: | Paper Jam 2 |
| Description: | Paper Jam 2 |
| Causes: | The front part of paper is jammed just after passing through the discharge sensor. |
| Error code: | 75 |
| Display: | [TRAY x] NOT INSTALLED |
| Description: | VIC Limutter |
| Causes: | · Loose cable connection · Defective fusing unit clutch · Defective IOD2 board · Defective MCTL board |
| Remedy: | 1) Check for any warping or damage to the cassette (In the case of warping or damage, replace the cassette) |
| Error code: | 90 |
| Display: | ERROR 90 F / W |
| Description: | Sub CPU fault. |
| Remedy: | Replace the CPU circuit board with a new one. |
| Error code: | 92 |
| Display: | ERROR 92 FROM WRITE |
| Description: | F-ROM WRITE error (F-ROM writing failure) F-ROM is not clearable on Parameter writing, FW down loading and Log clearing. (fls_secclr) |
| Causes: | 1 Main PCB failure |
| Remedy: | 1. Execute [#TEST] -> [#MEMORY CHECK] -> [F-ROM]. 2. Upload Parameters and initialize all parameters with [#PARAMETER]. 3. Replace the main PCB assy. |
| Error code: | 999 |
| Display: | Service call 999: Error |
| Description: | Stapler Motor Error |
| Causes: | • Color registration (MUSIC) failure |
| Remedy: | 1 Are staples jammed in the stapler? Go to step 2. Go to step 3. 2 Clear the staple jam and run the staple test in diagnostic mode or run a staple job. Does the problem reoccur? Replace the staple cartridge and to go step 4. Problem solved. 3 Are the connectors CN5 on the stapler and PJ1 on the finisher control board securely connected? Go to step 5. Securely connect the connectors. 4 Did replacement of the stapler cartridge resolve the problem? Problem resolved. Replace the stapler. 5 Make sure the finisher set switch is activated. Measure for 5 V dc between pins 11 and 12 on stapler connector CN5. Is 5 V dc present? Replace the stapler. Replace the finisher control board. 6 Did replacement of the finisher control board correct the problem? Problem solved. Go to step 7. 7 Is there continuity on the stapler to finisher control board cable? Replace the power supply. Replace the cable. |
| Error code: | E70 |
| Display: | E70 HDC INIT |
| Description: | Waste toner full |
| Remedy: | 1. Check the connection between PCBs. (Slider PCB ~ SL-Relay PCB ~ Main PCB) 2. Check the connection of Short assy. 3. Check neither damaged nor disconnected on FFC. 4. Replace FFC. 5. Replace some of the PCBs above. |
| Error code: | E71 |
| Display: | E71 PRAM DATA ADDR |
| Description: | Original not reaching the aligning sensor |
| Remedy: | Have too many originals been placed? Y: Reset the originals, following the specification. N: Are the original sheets curled or folded too much? Y: Flatten and reset the originals. N: Are different-size originals placed together? Y: Set only one-size originals. N: Is the gap between the aligning plate and the feed roller too large? Y: Adjust the gap. N: Is the separation pad stained? Y: Clean the separation pad. |
| Error code: | n01 |
| Display: | NO ATC UNIT |
| Description: | The [ATC] menu item was executed, but no ATC unit is installed. |
| Causes: | Instantaneous excessive load was given to the X-axis. |
| Remedy: | The [ATC] menu item can be executed, only when an ATC unit is installed. After a short interval, the machine automatically returns to the original screen. |
| Error code: | n02 |
| Display: | NOW CATCHING TOOL "ENTER" TO RELEASE |
| Description: | The power was switched on while a tool was in a gripped state. |
| Causes: | Big load has been given to the X-axis continuously. |
| Remedy: | When the power is switched on while a tool is gripped, the tool is released to ensure safety. Pressing the [ENTER] key immediately performs a forced release and clears the error. No operation to return the tool to the magazine is performed, so support the tool with your hand as you perform this operation to keep the tool from being dropped. (1)Press the [ENTER] key. A forced release is performed, and the message [IF TOOL IS RELEASED, THEN PUSH "ENTER"] appears. (2)If the tool was released, then press the [ENTER] key to clear the error. If the tool was not released, then switch off the power. Make sure the air pressure is within the specified range and that no air hoses of cables have come loose, then switch on the power. If the error message appears again, press the [ENTER] key. If this operation fails to release the tool, then contact your Roland DG Corp. service center. If this message does not appear even though a tool is grasped, then immediately switch off the power and contact your Roland DG Corp. service center. |
| Error code: | n03 |
| Display: | NO Z0 SENSOR SET SENSOR THEN ENTER |
| Description: | An attempt was made to carry out automatic measurement of tool length while the Z0 sensor was not connected. |
| Causes: | Big load has been given to the X-axis continuously for a long time. |
| Remedy: | The Z0 sensor is required in order to execute [LENGTH SCAN] (although this is not required when the rotary axis unit is installed). Connect the Z0 sensor, place it on the sensor base, then press the [ENTER] key. The machine clears the error, then restarts measurement. |
| Error code: | n04 |
| Display: | TOOL LENGTH TOO LONG SHORTEN IT AND ENTER |
| Description: | Automatic measurement cannot be performed because the tool is too long. |
| Causes: | Big load has been given to the X-axis continuously. Thermister of the X driver IC is defective. |
| Remedy: | On executing [LENGTH SCAN], if the tool is too long and measurement cannot be performed, this message appears and the tool is returned to the magazine. Replace the tool with one of the specified length, then press the [ENTER] key. The machine clears the error, then restarts measurement. |
| Error code: | n05 |
| Display: | AIR PRESSURE SHORT |
| Description: | Operation was interrupted because the pressure of the compressed air was lower than permitted. |
| Causes: | Instantaneous excessive load was given to the Y-axis. |
| Remedy: | This appears when the pressure of the compressed air is insufficient. First, readjust the air pressure to 0.5 to 0.65 MPa. When the display changes to ["ENTER" TO CONTINUE], press the [ENTER] key. The error is cleared and the operation resumes. |
| Error code: | n06 |
| Display: | AIR PRESSURE TOO HIGH |
| Description: | Operation was interrupted because the pressure of the compressed air was higher than permitted. |
| Causes: | Big load has been given to the Y-axis continuously. |
| Remedy: | This appears when the pressure of the compressed air is excessively high. First, readjust the air pressure to 0.5 to 0.65 MPa. When the display changes to ["ENTER" TO CONTINUE], press the [ENTER] key. The error is cleared and the operation resumes. |
| Error code: | n07 |
| Display: | OPERATING ERROR CAN`T RELEASE TOOL |
| Description: | The tool cannot be released. |
| Causes: | Big load has been given to the Y-axis continuously for a long time. |
| Remedy: | This appears when the grasped tool could not be released for some reason. Switch off the power and make sure the air pressure is within the permitted range. Also make sure that no air hoses or cables have come loose. Switch on the power again. When [NOW CATCHING TOOL "ENTER" TO RELEASE] appears, press the [ENTER] key to try performing a forced release. (Be careful not to let the tool fall at this time.) If this operation fails to release the tool, then contact your Roland DG Corp. service center. |
| Error code: | n08 |
| Display: | Y overheat |
| Description: | Y motor driver becomes too hot. |
| Causes: | Big load has been given to the Y-axis continuously. Thermister of the Y driver IC is defective. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. Replace the Main board. |
| Error code: | n09 |
| Display: | Z overload [peak] |
| Description: | Instantaneous excessive load was given to the Z-axis. |
| Causes: | Instantaneous excessive load was given to the Z-axis. |
| Remedy: | Check if there was no collision. Perform Load check. Check the Ball Thread. |
| Error code: | n10 |
| Display: | Z overload [short] |
| Description: | Big load has been given to the Z-axis continuously. |
| Causes: | Big load has been given to the Z-axis continuously. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. |
| Error code: | n11 |
| Display: | Z overload [long] |
| Description: | Big load has been given to the Z-axis continuously for a long time. |
| Causes: | Big load has been given to the Z-axis continuously for a long time. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. |
| Error code: | n12 |
| Display: | Z overheat |
| Description: | Z motor driver becomes too hot. |
| Causes: | Big load has been given to the Z-axis continuously. Thermister of the Z driver IC is defective. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. Replace the Main board. |
| Error code: | n13 |
| Display: | A overload [peak] |
| Description: | Instantaneous excessive load was given to the A-axis. |
| Causes: | Instantaneous excessive load was given to the A-axis. |
| Remedy: | Check if there was no collision. Perform Load check. Check the Ball Thread. |
| Error code: | n14 |
| Display: | A overload [short] |
| Description: | Big load has been given to the A-axis continuously. |
| Causes: | Big load has been given to the A-axis continuously. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. |
| Error code: | n15 |
| Display: | A overload [long] |
| Description: | Big load has been given to the A-axis continuously for a long time. |
| Causes: | Big load has been given to the A-axis continuously for a long time. |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. |
| Error code: | n16 |
| Display: | A overheat |
| Description: | A motor driver becomes too hot. |
| Causes: | Big load has been given to the A-axis continuously. Thermister |
| Remedy: | Check the milling condition. Perform Load check. Check the Ball Thread. Replace the Main board. |
| Error code: | n17 |
| Display: | S driver overload |
| Description: | Big load is given to the Spindle motor driver for a long time. |
| Causes: | Big load has given to the A-axis continuously. |
| Remedy: | Check the milling condition. |
| Error code: | n18 |
| Display: | S overheat |
| Description: | Spindle motor becomes too hot. |
| Causes: | Big load has given to the A-axis continuously. Thermister of the Spindle motor is not operating correctly. |
| Remedy: | Check the milling condition. Replace the thermister for the Spindle motor. |
| Error code: | n19 |
| Display: | S driver overheat |
| Description: | Spindle motor driver becomes too hot. |
| Causes: | Big load has given to the A-axis continuously. Thermister of the Spindle motor driver IC is not operating correctly. |
| Remedy: | Check the milling condition. Replace the Spindle board. |
| Error code: | n20 |
| Display: | S power overload |
| Description: | Current to the Spindle motor driver becomes abnormal condition. |
| Causes: | Big load has given to the A-axis continuously. |
| Remedy: | Check the milling condition. |
| Error code: | n21 |
| Display: | RANGE OVER Y |
| Description: | Drawing data is out of range |
| Causes: | The machine is waiting for data from the host computer after executing the “DIVISION” function. XXs: After the count is 0s frame and mark will be cut and the machine will be local mode. Exchange sheet and continue division. |
| Remedy: | Allocate the data within the drawing range. |
| Error code: | n22 |
| Display: | CARTRIDGE ON/OFF |
| Description: | Cartridge removing/inserting error |
| Causes: | The signal lines of the RS-232C are indicating while “LOOP BACK test is being executed.” |
| Error code: | n23 |
| Display: | OTHER INKSET SELECT |
| Description: | Same Ink set selected (No change on Ink set) |
| Causes: | This message appears when transferring data to the host PC while BUFFER DUMP maintenance is in progress. |
| Remedy: | Select Ink set different from Current ink set. |
| Error code: | n24 |
| Display: | Expiration :MMCCYYKK |
| Description: | Out of Ink expiration date (2 months or more) |
| Causes: | This message appears when data transfer to the host PC is completed under BUFFER DUMP maintenance. |
| Remedy: | Replace Ink cartridge with a new one. If indicated again, check the followings. 1. Check the assembly of ID contact PCB. Check the shape of contact and clean it. 2. Check ID contact PCB connector connection, or replace it. 3. Check FFCs and connector connections between Cartridge PCB and Fan PCB, and Fan PCB and Main PCB. 4. Replace some of the PCBs above. |
| Error code: | n25 |
| Display: | NON-ORIGNL :MMCCYYKK |
| Description: | Non-genuine ink cartridge Ink cartridge over 444 cc used. |
| Remedy: | Replace Ink cartridge with a new one. If indicated again, check the followings. 1. Check the assembly of ID contact PCB. Check the shape of contact and clean it. 2. Check ID contact PCB connector connection, or replace it. 3. Check FFCs and connector connections between Cartridge PCB and Fan PCB, and Fan PCB and Main PCB. 4. Replace some of the PCBs above. |
| Error code: | n26 |
| Display: | !INK UPSTREAM GUARD :MMCCYYKK |
| Description: | In Back-flow preventing process execution Back-flow preventing process (FPGA, FW) is started by ON of High or Limit sensor of Sub-tank. |
| Causes: | This message appears when Remote Mode is activated with the number of copies set to 2 or larger in the registration mark detection setting. |
| Remedy: | Wait until “ERROR 149” is indicated after the preventing process is completed. |
| Error code: | n27 |
| Display: | !PRINT ERROE |
| Description: | "HDC FIFO UNDER" error occurs during drawing. (F/W Ver.1.10) |
| Remedy: | Refer to ERROR 09 HDC FIFO UNDER |
| Error code: | n28 |
| Display: | !NON-CURE PRINT MODE |
| Description: | A drawing condition is set online in order not to harden ink. (F/W Ver.1.20 to 1.64) |
| Remedy: | 1. Change the printing condition. |
