Ricoh DX4640PD
Рейтинг
Модули
FRAME SECTION 1
DRIVE SECTION 4
Drum Unit 5
Master Making Unit 5
Master Making Unit 3
Drum Unit 3
Paper Delivery Unit 1
Drive Section 1
Paper Feed Section 3
Drum Unit 4
DRIVE SECTION 2
Duplex Clamper Unit
Frame Section 4
Master Eject 2
Drum Unit 2
Control Unit
EXTERIOR 1
Paper Delivery Table 1
Paper Delivery Table 2
PAPER FEED SECTION 2
Frame Section 6
OPERATION PANEL
DUPLEX UNIT 5
Master Making Unit 2
Paper Feed Section 6
Duplex Unit 7
DRIVE SECTION 3
ELECTRICAL SECTION 2
Paper Feed Section 1
PAPER EXIT SECTION
DUPLEX UNIT 1
Paper Feed Section 5
SCANNER UNIT 3
Frame Section 5
Master Making Unit 1
Paper Delivery Unit 2
Frame Section 3
Paper Delivery Unit 3
DUPLEX UNIT 3
FRAME SECTION 2
Master Eject 1
Master Making Unit 4
DUPLEX UNIT 4
Master Eject 3
Drum Unit 1
Duplex Unit 6
DUPLEX UNIT 2
Master Making Unit 6
ELECTRICAL SECTION 1
SCANNER UNIT 1
Paper Feed Section 4
SCANNER UNIT 2
EXTERIOR 2
Детали Drum Unit 1
| Деталь: | Guard:CE-012s:23.5mm |
| Парткод: | C239 1182 |
| Деталь: | Stand M28 |
| Парткод: | C229 1096 |
| Деталь: | Grip:Machine or Copier |
| Парткод: | C262 1078 |
| Деталь: | Bracket:Guide:Grip |
| Парткод: | C262 1077 |
| Деталь: | Cover:Grip:Rear Right |
| Парткод: | C262 1076 |
| Деталь: | Slide Rail Roller |
| Парткод: | C229 2615 |
| Деталь: | Rail:Machine or Copier:Welding |
| Парткод: | C244 2611 |
| Деталь: | Stay:Scanner:Right:Assy |
| Парткод: | C244 1079 |
| Деталь: | Bracket:Slide Rail:Rear:Plotter |
| Парткод: | C244 2277 |
| Деталь: | Plotter Front Slide Rail Spacer |
| Парткод: | C239 2276 |
| Деталь: | Hinge Spacer |
| Парткод: | C244 1862 |
| Деталь: | Master Optics Sensor |
| Парткод: | C257 5851 |
| Деталь: | Grounding Plate - Upper Rear |
| Парткод: | A267 1089 |
| Деталь: | Guard:CE-012S:50mm |
| Парткод: | C269 5688 |
| Деталь: | Fan bracket |
| Парткод: | C257 1180 |
| Деталь: | DC Motor:Air Knife:Assy |
| Парткод: | C265 5826 |
| Деталь: | Fan Harness |
| Парткод: | C257 5202 |
| Деталь: | Slide Rail:Plotter |
| Парткод: | C262 2280 |
| Деталь: | Upper Base Shaft |
| Парткод: | C257 1184 |
| Деталь: | Upper Base Bracket |
| Парткод: | C257 1183 |
| Деталь: | Master Tension Roller |
| Парткод: | C229 2281 |
| Деталь: | Inner Cover:Lower |
| Парткод: | C269 1294 |
| Деталь: | Grip:Main:Welding |
| Парткод: | C269 1078 |
| Деталь: | Paper Feed Unit Assy |
| Парткод: | C257 2744 |
| Деталь: | Sector Arm |
| Парткод: | C244 4001 |
| Деталь: | Guide Sector Assy |
| Парткод: | C257 4050 |
| Деталь: | LINK |
| Парткод: | C244 4051 |
| Деталь: | GUIDE PIN |
| Парткод: | C229 4053 |
| Деталь: | STEPPED SCREW |
| Парткод: | C244 3522 |
| Деталь: | Sector Arm |
| Парткод: | C244 4052 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Master Feed Arm |
| Парткод: | C244 4054 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | WORM GEAR |
| Парткод: | C229 4056 |
| Деталь: | Bracket:Clamp:Open And Close:Assy |
| Парткод: | C244 4189 |
| Деталь: | DC Motor:5.0W:MM34 |
| Парткод: | C259 5803 |
| Деталь: | Drive Pulley - Paper Separation |
| Парткод: | C229 2947 |
| Деталь: | Harness:Connecting:Clamp:Assy |
| Парткод: | C269 5252 |
| Деталь: | Stepper Motor Mm56*66 |
| Парткод: | C257 5816 |
| Деталь: | Motor pulley |
| Парткод: | C229 2946 |
| Деталь: | Rubber Bushing - M4 |
| Парткод: | C403 1899 |
| Деталь: | Paper Feed Motor Bracket |
| Парткод: | C244 5731 |
| Деталь: | Timing Belt - 80-XL-050 |
| Парткод: | C229 2948 |
| Деталь: | Stepper Motor Mm56*64 |
| Парткод: | C257 5817 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Open and Close Clamp Assy |
| Парткод: | C257 4000 |
| Деталь: | Tension Spring:Bracket:Stepper Motor:18N |
| Парткод: | C265 2998 |
| Деталь: | Blade:Front:Drum:Sap |
| Парткод: | C262 2478 |
| Деталь: | BEARING HOLDER |
| Парткод: | C236 2468 |
| Деталь: | Gear - 19Z |
| Парткод: | C229 2478 |
| Деталь: | Gear - 37Z |
| Парткод: | C229 2459 |
| Деталь: | Adjusting Plate - Doctor Roller |
| Парткод: | C229 2473 |
| Деталь: | Stepped Screw - M6 |
| Парткод: | C244 5125 |
| Деталь: | Sensor Actuator |
| Парткод: | C229 2550 |
| Деталь: | Ink Supply Roller Arm |
| Парткод: | C236 2575 |
| Деталь: | Side Plate:Oil Supply Roller:INK:Front:Assy |
| Парткод: | C236 2570 |
| Деталь: | Shaft:Arm:Move:Oil Supply Roller |
| Парткод: | C265 2567 |
| Деталь: | Return Gear |
| Парткод: | C236 2566 |
| Деталь: | Screw:Drum |
| Парткод: | C265 2315 |
| Деталь: | Support Stay |
| Парткод: | C229 2479 |
| Деталь: | Oil Supply Roller Assy |
| Парткод: | C236 2540 |
| Деталь: | Middle Drive Gear |
| Парткод: | C236 2466 |
| Деталь: | Ink Roller |
| Парткод: | C229 2451 |
| Деталь: | Rear Side Plate - Ink Supply Roller |
| Парткод: | C236 2573 |
| Деталь: | Separation Plate:Ink:Front:Assy |
| Парткод: | C262 2450 |
| Деталь: | Doctor Roller |
| Парткод: | C229 2458 |
| Деталь: | Separation Plate:Ink:Rear:Assy |
| Парткод: | C262 2466 |
| Деталь: | Ground Plate - Ink Roller |
| Парткод: | C236 2465 |
| Деталь: | Gear:Ink:Z16 |
| Парткод: | C265 2646 |
| Деталь: | Blade:Rear:Drum:Sap |
| Парткод: | C262 2479 |
| Деталь: | Side Plate:Front:Oil Supply Roller:2.5 |
| Парткод: | C265 2461 |
| Деталь: | Side Plate:Rear:Oil Supply Roller:Assy |
| Парткод: | C265 2462 |
| Деталь: | Front Spring |
| Парткод: | C236 2562 |
| Деталь: | Spring:Oil Supply Roller:Rear |
| Парткод: | C265 2563 |
| Деталь: | Worm Wheel Gear |
| Парткод: | C236 2564 |
| Деталь: | Ink Middle Gear |
| Парткод: | C236 2565 |
| Деталь: | Side Plate Stay |
| Парткод: | C236 2464 |
| Деталь: | Oil Supply Roller:Assy |
| Парткод: | C262 2305 |
| Деталь: | Screw:DIA4*M3*0.9 |
| Парткод: | C265 2450 |
| Деталь: | Plate:Blade:Drum |
| Парткод: | C262 2623 |
| Деталь: | Blade:Collect:Rear |
| Парткод: | C262 2472 |
| Деталь: | Blade:Collect:Front |
| Парткод: | C262 2473 |
| Деталь: | Discharge Brush 207mm Tension |
| Парткод: | C257 2221 |
| Деталь: | Thermal Head Front Gide Plate |
| Парткод: | C259 2119 |
| Деталь: | Discharge Brush 20mm Tension |
| Парткод: | C257 2222 |
| Деталь: | Adjusting Pin Collar |
| Парткод: | C257 2128 |
| Деталь: | Positioning Bracket |
| Парткод: | C259 2125 |
| Деталь: | Thermal Head Spacer |
| Парткод: | C259 2120 |
| Деталь: | Thermal Head Spring |
| Парткод: | C259 2094 |
| Деталь: | Thermal Head Tension Spring |
| Парткод: | C259 2095 |
| Деталь: | Thermal Head Stay |
| Парткод: | C257 2087 |
| Деталь: | Bracket:Stopper:Base |
| Парткод: | C244 2098 |
| Деталь: | Bushing Washer - M8 |
| Парткод: | C218 4038 |
| Деталь: | Release Roller |
| Парткод: | C229 2113 |
| Деталь: | RELEASE CAM |
| Парткод: | C229 2112 |
| Деталь: | Thermal Head A3 |
| Парткод: | C259 5180 |
| Деталь: | Rear Plotter Slide Rail Spacer |
| Парткод: | C239 1993 |
| Деталь: | Air Knife DC Motor: 24V 5.3W |
| Парткод: | C257 5826 |
| Деталь: | Cover:Fan |
| Парткод: | C265 2066 |
| Деталь: | Duct Cover Grip |
| Парткод: | C239 2066 |
| Деталь: | Lower Duct Cover |
| Парткод: | C239 2064 |
| Деталь: | Duct Cover Magnet |
| Парткод: | C244 2067 |
| Деталь: | Bushing- 6mm |
| Парткод: | H012 1181 |
| Деталь: | Thermal Head Screw |
| Парткод: | C257 2123 |
| Деталь: | Ground Plate:Right:Plotter |
| Парткод: | C259 2249 |
| Деталь: | Bracket:Optics Sensor:Duct |
| Парткод: | C269 2100 |
| Деталь: | Reverse Roller Guide Plate |
| Парткод: | C257 2034 |
| Деталь: | Positioning Spacer |
| Парткод: | C257 1987 |
| Деталь: | STAY |
| Парткод: | C257 1985 |
| Деталь: | Sensor Cover |
| Парткод: | C257 2239 |
| Деталь: | Bracket:Sensor:Leading Edge |
| Парткод: | C269 2240 |
| Деталь: | Master Set Sensor |
| Парткод: | C257 5855 |
| Деталь: | Reverse Roller |
| Парткод: | C257 2008 |
| Деталь: | Tension Roller |
| Парткод: | C257 2009 |
| Деталь: | Reverse Roller:Plotter:Lower |
| Парткод: | C269 2009 |
| Деталь: | Guide Plate:Duct:Open and Close:Assy |
| Парткод: | C244 2042 |
| Деталь: | Lower Spacer - Reverse Roller |
| Парткод: | C236 2010 |
| Деталь: | Link:Upper:Open and Close:Guide Plate |
| Парткод: | C244 2057 |
| Деталь: | Right Reverse Roller Guide |
| Парткод: | C244 2047 |
| Деталь: | Arm:Open and Close:Guide Plate:Assy |
| Парткод: | C244 2052 |
| Деталь: | Drum Lock Solenoid |
| Парткод: | C257 5870 |
| Деталь: | Cover:Master:Lower:Assy |
| Парткод: | C244 2139 |
| Деталь: | Solenoid cover |
| Парткод: | C233 2215 |
| Деталь: | Magnet Catch Spacer |
| Парткод: | C230 2199 |
| Деталь: | Magnet Catch:Assy |
| Парткод: | C244 2198 |
| Деталь: | Gear 36Z |
| Парткод: | C257 2010 |
| Деталь: | Idler Gear |
| Парткод: | C257 2012 |
| Деталь: | BUSHING |
| Парткод: | C229 2006 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | C236 2004 |
| Деталь: | Gear 20Z |
| Парткод: | C257 2011 |
| Деталь: | Bushing- 6mm |
| Парткод: | H012 1181 |
| Деталь: | Lower Guide Link |
| Парткод: | C229 2058 |
| Деталь: | Pulley - Upper Reverse Roller |
| Парткод: | C236 2011 |
| Деталь: | Roller:Tension:Plotter:Lower |
| Парткод: | C265 2003 |
| Деталь: | Right Guide - Slide Rail |
| Парткод: | C229 2496 |
| Деталь: | Right Ink Holder |
| Парткод: | C229 2493 |
| Деталь: | Left Ink Holder |
| Парткод: | C229 2500 |
| Деталь: | Left Guide - Slide Rail |
| Парткод: | C229 2499 |
| Деталь: | Ink Holder Slider |
| Парткод: | C229 2488 |
| Деталь: | Holder:Ink:H:Assy |
| Парткод: | C244 2488 |
| Деталь: | Holder:Ink:4:Assy (Color Drum) |
| Парткод: | C244 2484 |
| Деталь: | Ink Holder Knob |
| Парткод: | C244 2487 |
| Деталь: | Frame:Drum |
| Парткод: | C244 2541 |
| Деталь: | Cover:Ink Cartridge |
| Парткод: | C262 2498 |
| Деталь: | Shift Motor Cover |
| Парткод: | C236 2547 |
| Деталь: | DC Motor:2.0W:MM32:Heaven And Earth |
| Парткод: | C259 5820 |
| Деталь: | Shift Sensor Encoder |
| Парткод: | C229 1177 |
| Деталь: | Shift Motor Bracket |
| Парткод: | C229 2571 |
| Деталь: | Drum Shift Sensor Bracket |
| Парткод: | C229 2582 |
| Деталь: | Cover:Sensor:Left and Right:Move |
| Парткод: | C262 2589 |
| Деталь: | WORM GEAR |
| Парткод: | C229 2576 |
| Деталь: | Shift Drive Gear |
| Парткод: | C229 2624 |
| Деталь: | Drum H.P Sensor Bracket |
| Парткод: | C229 2581 |
| Деталь: | SLIDER |
| Парткод: | C229 2583 |
| Деталь: | Slide Fixed Plate |
| Парткод: | C229 2580 |
| Деталь: | Spring Plate |
| Парткод: | C229 2609 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Pump Unit |
| Парткод: | C262 2510 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Ink Holder - Small |
| Парткод: | C257 2480 |
| Деталь: | Sensor bracket |
| Парткод: | C257 2491 |
| Деталь: | Photointerruptor |
| Парткод: | C257 5860 |
| Деталь: | Sensor Cover |
| Парткод: | C257 2492 |
| Деталь: | Pump Unit Harness |
| Парткод: | C257 5285 |
| Деталь: | Cap:Pump Motor |
| Парткод: | C262 2511 |
| Деталь: | DC Motor:Cap:Assy |
| Парткод: | C257 2577 |
| Деталь: | Hale Unit:Assy |
| Парткод: | C269 3800 |
| Деталь: | Exchange Plate:Assy |
| Парткод: | C269 3909 |
| Деталь: | Guide:Small:Exchange Plate |
| Парткод: | C269 3915 |
| Деталь: | Guide:Large:Exchange Plate |
| Парткод: | C269 3914 |
| Деталь: | Cover:Harness:Fan:Hale Unit |
| Парткод: | C269 3889 |
| Деталь: | Harness:Ground Wire:Hale:Assy |
| Парткод: | C269 5221 |
| Деталь: | Exit Roller:Assy |
| Парткод: | C269 3865 |
| Деталь: | Exchange Powl:Hale:Assy |
| Парткод: | C269 3900 |
| Деталь: | Drum Stay:Front:Hale Unit |
| Парткод: | C269 3946 |
| Деталь: | Drum Stay:Middle Front:Hale Unit |
| Парткод: | C269 3948 |
| Деталь: | Drum Stay:Middle:Hale Unit |
| Парткод: | C269 3941 |
| Деталь: | Drum Stay:Middle Rear:Hale Unit |
| Парткод: | C269 3947 |
| Деталь: | Drum Stay:Rear:Hale Unit |
| Парткод: | C269 3944 |
| Деталь: | Spring Plate:Earth:Hale |
| Парткод: | C269 3940 |
| Деталь: | Harness:Hale:Assy |
| Парткод: | C269 5205 |
| Деталь: | Stepper Motor:Hale Unit:MM56 |
| Парткод: | C269 5814 |
| Деталь: | Bracket:Stepper Motor |
| Парткод: | C269 3967 |
| Деталь: | Timing Belt:S2M152 |
| Парткод: | C269 3956 |
| Деталь: | Plate:Shaft:Adjusting Plate |
| Парткод: | C269 3893 |
| Деталь: | Spring Plate:Return:Adjusting Plate |
| Парткод: | C269 3895 |
| Деталь: | Duct:Hale |
| Парткод: | C269 3960 |
| Деталь: | Fan:DC24V:0.5A |
| Парткод: | C259 5824 |
| Деталь: | TAPPING SCREW |
| Парткод: | C244 4111 |
| Деталь: | Shaft:Adjusting Plate |
| Парткод: | C269 3896 |
| Деталь: | Adjusting Plate:Middle:Hale Unit |
| Парткод: | C269 3899 |
| Деталь: | Adjusting Plate:Right:Hale Unit |
| Парткод: | C269 3898 |
| Деталь: | Adjusting Plate:Left:Hale Unit |
| Парткод: | C269 3897 |
| Деталь: | Arm:Return:Adjusting Plate |
| Парткод: | C269 3894 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Bracket:Pump:Sensor |
| Парткод: | C269 3126 |
| Деталь: | Bracket:Pump Motor:Piston |
| Парткод: | C269 3120 |
| Деталь: | Brushless Motor DC24V 38W |
| Парткод: | D002 1171 |
| Деталь: | Harness:Connecting:Pump:Assy |
| Парткод: | C269 5260 |
| Деталь: | Side Plate:Piston:Pump:Assy |
| Парткод: | C269 3100 |
| Деталь: | Cover:Cylinder:Paper Exit Sub-Unit |
| Парткод: | C269 3143 |
| Деталь: | Bearing Case |
| Парткод: | C264 5134 |
| Деталь: | Supporting Plate:Piston:Shaft |
| Парткод: | C269 3127 |
| Деталь: | Gear:Z66:Piston:Press Fit |
| Парткод: | C269 3119 |
| Деталь: | Gear:Z44:Z20:Pump Motor:Drive |
| Парткод: | C269 3122 |
| Деталь: | Shaft:Pump Motor:Drive |
| Парткод: | C269 3121 |
| Деталь: | Guide:Hose:Exit |
| Парткод: | C269 3132 |
| Деталь: | Bracket:Cylinder Protection:Pump |
| Парткод: | C269 3125 |
| Деталь: | Air Pump Cylinder |
| Парткод: | C209 6240 |
| Деталь: | Pin:Drive:Piston |
| Парткод: | C269 3124 |
| Деталь: | Valve:Piston:Pump |
| Парткод: | C209 6215 |
| Деталь: | Piston:Pump |
| Парткод: | C209 6214 |
| Деталь: | Pin:Piston:Pump |
| Парткод: | C209 6213 |
| Деталь: | Guide Plate:Piston:Pump:Duplex |
| Парткод: | C269 3130 |
| Деталь: | Piston:Pump:Assy |
| Парткод: | C269 3056 |
| Деталь: | Shielding Plate:Piston:Pump Unit |
| Парткод: | C269 3128 |
| Деталь: | Seal:Piston:Pump |
| Парткод: | C209 6216 |
| Деталь: | Plate:Harness:Pump Motor |
| Парткод: | C269 3129 |
| Деталь: | Feeler Balancer |
| Парткод: | C257 2867 |
| Деталь: | Pressure Release Sensor Bracket |
| Парткод: | C257 2861 |
| Деталь: | Discharge Brush |
| Парткод: | C257 2834 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Feed Roller Harness |
| Парткод: | C257 5241 |
| Деталь: | DC Motor:3.7w:DIA25.4 |
| Парткод: | C259 5827 |
| Деталь: | Feed Pressuer Motor Bracket |
| Парткод: | C244 5734 |
| Деталь: | SPRING BRACKET |
| Парткод: | C244 2860 |
| Деталь: | Separation Control Rack |
| Парткод: | C229 2858 |
| Деталь: | Screw:Safety |
| Парткод: | AA14 3791 |
| Деталь: | PCB:Paper Feed Pressure |
| Парткод: | C257 5157 |
| Деталь: | Worm Wheel Gear - 14Z/40Z |
| Парткод: | C229 2856 |
| Деталь: | Gear - 14Z/42Z |
| Парткод: | C229 2857 |
| Деталь: | PULLEY |
| Парткод: | C200 3712 |
| Деталь: | Pressure Release Lever Spring Plate |
| Парткод: | C257 2857 |
| Деталь: | Gear:Idler:26Z |
| Парткод: | H519 4357 |
| Деталь: | Gear - 20/27Z |
| Парткод: | C209 4114 |
| Деталь: | Paper Feed Pressure Harness |
| Парткод: | C257 5206 |
| Деталь: | Tension Spring:Paper Feed Pressure |
| Парткод: | C265 2861 |
| Деталь: | Paper Pressure Lever |
| Парткод: | C229 2862 |
| Деталь: | BUSHING |
| Парткод: | C229 2863 |
| Деталь: | Paper Sensor Feeler |
| Парткод: | C257 2862 |
| Деталь: | Feeler Roller |
| Парткод: | C257 2869 |
| Деталь: | Height Sensor Bracket |
| Парткод: | C244 2866 |
| Деталь: | Shaft:Paper Feed Roller |
| Парткод: | C244 2836 |
| Деталь: | Paper Feed Arm |
| Парткод: | C257 2833 |
| Деталь: | Paper Feed Arm Balancer |
| Парткод: | C257 2835 |
| Деталь: | PAPER FEED ROLLER |
| Парткод: | C238 2835 |
| Деталь: | Shaft:Pickup |
| Парткод: | C244 2838 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Stepped Screw - M6 |
| Парткод: | C244 5125 |
| Деталь: | Timing Belt:75-MXL-8.0 |
| Парткод: | C244 2949 |
| Деталь: | Pick-up Pully |
| Парткод: | C238 2947 |
| Деталь: | Feed Roller Drive Pulley |
| Парткод: | C229 2950 |
| Деталь: | Pressure Release Lever |
| Парткод: | C257 2859 |
| Деталь: | Pressure Release Link |
| Парткод: | C257 2858 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Grip Rings:DIA6 |
| Парткод: | C265 2837 |
| Деталь: | Washer - M6.2x16 |
| Парткод: | H041 2137 |
| Деталь: | Stay:Paper Feed:Assy |
| Парткод: | C257 2850 |
| Деталь: | Ink Supply Roller Harness |
| Парткод: | C257 5256 |
| Деталь: | MOTOR BRACKET |
| Парткод: | C229 2558 |
| Деталь: | DC Motor:2.0W:MM32 |
| Парткод: | C259 5804 |
| Деталь: | Ink Bottle Bracket |
| Парткод: | C229 2490 |
| Деталь: | PUSH SWITCH |
| Парткод: | AW50 0012 |
| Деталь: | Magnet Catch:44.1n |
| Парткод: | AG07 0504 |
| Деталь: | Ink Sensor Bracket |
| Парткод: | C229 2491 |
| Деталь: | Ink Sensor Terminal |
| Парткод: | C233 2493 |
| Деталь: | Bearing shaft |
| Парткод: | C229 2369 |
| Деталь: | Ink Frame Slide Rail - Left |
| Парткод: | C244 2494 |
| Деталь: | Ink Frame Slide Rail - Right |
| Парткод: | C244 2495 |
| Деталь: | Sensor bracket |
| Парткод: | C229 2563 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Bearing Shaft - Lower Left |
| Парткод: | C229 2371 |
| Деталь: | Drum Harness Assy |
| Парткод: | C257 5214 |
| Деталь: | HARNESS COVER |
| Парткод: | C229 2542 |
| Деталь: | BRACKET |
| Парткод: | C257 2534 |
| Деталь: | PIPE |
| Парткод: | C257 2535 |
| Деталь: | Hose Band |
| Парткод: | C244 2530 |
| Деталь: | Ink Tube |
| Парткод: | C244 2532 |
| Деталь: | Ink Sensor Terminal - Center |
| Парткод: | C233 2496 |
| Деталь: | THERMISTOR ASSY |
| Парткод: | C257 5861 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Screw M3x6 |
| Парткод: | C244 2454 |
| Деталь: | SPRING TUBE |
| Парткод: | C257 2536 |
| Деталь: | Supporting Plate:Piston:Pump:Assy |
| Парткод: | C269 3110 |
| Деталь: | Bearing Case |
| Парткод: | C264 5134 |
| Деталь: | Bracket:Pump Motor:Piston |
| Парткод: | C269 3120 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Bracket:Pump:Sensor |
| Парткод: | C269 3126 |
| Деталь: | Brushless Motor DC24V 38W |
| Парткод: | D002 1171 |
| Деталь: | Harness:Connecting:Pump:Assy |
| Парткод: | C269 5260 |
| Деталь: | Gear:Z44:Z20:Pump Motor:Drive |
| Парткод: | C269 3122 |
| Деталь: | Shaft:Pump Motor:Drive |
| Парткод: | C269 3121 |
| Деталь: | Shielding Plate:Piston:Pump Unit |
| Парткод: | C269 3128 |
| Деталь: | Air Pump Cylinder |
| Парткод: | C209 6240 |
| Деталь: | Bracket:Cylinder Protection:Pump |
| Парткод: | C269 3125 |
| Деталь: | Supporting Plate:Piston:Shaft |
| Парткод: | C269 3127 |
| Деталь: | Gear:Z66:Piston:Press Fit |
| Парткод: | C269 3119 |
| Деталь: | Pin:Drive:Piston |
| Парткод: | C269 3124 |
| Деталь: | Pin:Piston:Pump |
| Парткод: | C209 6213 |
| Деталь: | Valve:Piston:Pump |
| Парткод: | C209 6215 |
| Деталь: | Guide Plate:Piston:Pump:Duplex |
| Парткод: | C269 3130 |
| Деталь: | Piston:Pump |
| Парткод: | C209 6214 |
| Деталь: | Piston:Pump:Assy |
| Парткод: | C269 3056 |
| Деталь: | Seal:Piston:Pump |
| Парткод: | C209 6216 |
| Деталь: | POSITIONING PLATE |
| Парткод: | C269 4618 |
| Деталь: | Shaft:Pawl:Clamp:Duplex |
| Парткод: | C269 4610 |
| Деталь: | Pawl:Clamp:Paper:Duplex |
| Парткод: | C269 4611 |
| Деталь: | Guide Plate:Front:Move:Duplex |
| Парткод: | C269 4602 |
| Деталь: | Positioning Plate:Guide Plate |
| Парткод: | C269 4617 |
| Деталь: | Lever:Open and Close:Pawl:Clamp |
| Парткод: | C269 4613 |
| Деталь: | Shaft:Roller:Guide Plate |
| Парткод: | C269 4605 |
| Деталь: | COMPRESSION SPRING |
| Парткод: | C269 4614 |
| Деталь: | Guide:Clamp:Duplex:Front:Assy |
| Парткод: | C269 4625 |
| Деталь: | Stopper:Open and Close:Pawl |
| Парткод: | C269 4636 |
| Деталь: | Pulley:Driven:Guide Plate:Clamp |
| Парткод: | C269 4630 |
| Деталь: | Shaft:Drive:Guide Plate:Clamp |
| Парткод: | C269 4628 |
| Деталь: | Pulley:Drive:Guide Plate:Clamp |
| Парткод: | C269 4629 |
| Деталь: | Timing Belt:Pulley:Clamp:Doplrx |
| Парткод: | C269 4632 |
| Деталь: | Pierce Ring:DIA5 |
| Парткод: | C269 4984 |
| Деталь: | Snap Ring - M6 |
| Парткод: | 52 152 621 |
| Деталь: | Guide Plate:Leading Edge |
| Парткод: | C269 4601 |
| Деталь: | Sheet:Reflection:Sensor |
| Парткод: | C269 4603 |
| Деталь: | Sheet:Leading Edge:Paper |
| Парткод: | C269 4604 |
| Деталь: | Feeler:Positioning Sensor |
| Парткод: | C269 4639 |
| Деталь: | Guide:Side:Guide Plate:Clamp:Duplex |
| Парткод: | C269 4640 |
| Деталь: | Guide:Clamp:Duplex:Rear:Assy |
| Парткод: | C269 4620 |
| Деталь: | Supporter:Clamp:Duplex:Rear Upper |
| Парткод: | C269 4623 |
| Деталь: | Bracket:Positioning Sensor |
| Парткод: | C269 4638 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Pulley:Small:Drive:Clamp:Duplex |
| Парткод: | C269 4641 |
| Деталь: | Timing Belt:Motor:Drive:Clamp |
| Парткод: | C269 4643 |
| Деталь: | Bushing - 5x7x3.8mm |
| Парткод: | AA08 1003 |
| Деталь: | Stud:Bracket:Guide:Clamp:Duplex |
| Парткод: | C269 4633 |
| Деталь: | ROCKER SWITCH |
| Парткод: | A250 5725 |
| Деталь: | Bracket:Main Switch |
| Парткод: | C262 5631 |
| Деталь: | Harness:Main Switch:Assy |
| Парткод: | C269 5216 |
| Деталь: | ADJUSTMENT PLATE |
| Парткод: | C257 2630 |
| Деталь: | Bracket:Standard:Drum:Left |
| Парткод: | C269 1190 |
| Деталь: | Bracket:Pin:Drum:Assy |
| Парткод: | C265 2616 |
| Деталь: | Master Tension Roller |
| Парткод: | C229 2281 |
| Деталь: | Bracket:Tension:Assy |
| Парткод: | C265 2279 |
| Деталь: | PUSH SWITCH |
| Парткод: | C257 5856 |
| Деталь: | PCB:LED:G |
| Парткод: | C269 5147 |
| Деталь: | Bracket:Printed Circuit Board:LED |
| Парткод: | C269 5626 |
| Деталь: | DC Solenoid:Tandem Tray:Lock |
| Парткод: | AX11 0115 |
| Деталь: | Bracket:Sensor:Lock:Uni |
| Парткод: | C269 1184 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Bracket:DC Solenoid:Lock:Uni |
| Парткод: | C269 1181 |
| Деталь: | Tension Spring:Stopper:Lock:Uni |
| Парткод: | C269 1185 |
| Деталь: | Stopper:Lock:Drum |
| Парткод: | C269 1182 |
| Деталь: | Stepped Screw - M6 |
| Парткод: | C244 5125 |
| Деталь: | Stopper:Lock:Duplex Unit |
| Парткод: | C269 1187 |
| Деталь: | Side Plate:Front:Slide:Peen |
| Парткод: | C244 3487 |
| Деталь: | Transport Lower Gear - 26Z |
| Парткод: | C229 3537 |
| Деталь: | Timing Belt - S2M76 |
| Парткод: | C229 3532 |
| Деталь: | Driven Pulley - 18Z |
| Парткод: | C229 3530 |
| Деталь: | Gear/pulley - 26Z/16T |
| Парткод: | C229 3531 |
| Деталь: | Bushing - Master Eject Roller |
| Парткод: | C229 3486 |
| Деталь: | Pressure Spring:2.8N |
| Парткод: | C259 3459 |
| Деталь: | Spring Plate |
| Парткод: | C229 3476 |
| Деталь: | Grip:Lock:Knob:Printing |
| Парткод: | C244 3471 |
| Деталь: | Roller Unit Arm |
| Парткод: | C229 3478 |
| Деталь: | Lock:Slide Rail |
| Парткод: | C244 3474 |
| Деталь: | Slide Rail:Upper:Peen |
| Парткод: | C259 3485 |
| Деталь: | Guide:Master:Trailing Edge |
| Парткод: | C244 3609 |
| Деталь: | Bracket:Belt Tensioner:Peen |
| Парткод: | C244 3533 |
| Деталь: | Belt Tension Collar |
| Парткод: | C229 3536 |
| Деталь: | Stay:Roller:Arm |
| Парткод: | C244 3461 |
| Деталь: | Tension Spring:Position:Roller:2.4N |
| Парткод: | C259 3482 |
| Деталь: | Side Plate:Rear:Slide |
| Парткод: | C244 3462 |
| Деталь: | Stopper:Slide Rail:Machine or Copier |
| Парткод: | C244 3589 |
| Деталь: | Harness:Master Ejection |
| Парткод: | C257 5245 |
| Деталь: | Snap Ring |
| Парткод: | 54 472 681 |
| Деталь: | Collar - 6mm |
| Парткод: | C229 3481 |
| Деталь: | Guide:Upper Rear |
| Парткод: | C265 3455 |
| Деталь: | Guide:Upper Front |
| Парткод: | C244 3615 |
| Деталь: | Guide:Upper Middle |
| Парткод: | C244 3454 |
| Деталь: | Transport Roller:Upper:Rubber |
| Парткод: | C265 3453 |
| Деталь: | Roller:Exfloliation Unit:A3 |
| Парткод: | C265 3454 |
| Деталь: | Transport Roller:Lower:Assy |
| Парткод: | C265 3451 |
| Деталь: | Bracket:Photo Refiection Sensor |
| Парткод: | C244 3467 |
| Деталь: | Master Optics Sensor |
| Парткод: | C257 5851 |
| Деталь: | Guide:Lower:Transport Roller |
| Парткод: | C244 3465 |
| Деталь: | Stay:Lower:Side Plate:Moveable |
| Парткод: | C259 3464 |
| Деталь: | Cover:Harness:Sensor |
| Парткод: | C244 3488 |
| Деталь: | Transport Roller:Master Ejection:Assy |
| Парткод: | C265 3450 |
| Деталь: | Transport Unit:Master Ejection:Assy |
| Парткод: | C265 3400 |
| Деталь: | Guide:Exfloliation Unit:Front Upper |
| Парткод: | C244 3622 |
| Деталь: | Guide:Exfloliation Unit:Rear Upper |
| Парткод: | C244 3621 |
| Деталь: | Stopper:Upper:Transport Roller |
| Парткод: | C244 3456 |
| Деталь: | Guide:Upper:Sensor |
| Парткод: | C265 3458 |
| Деталь: | Guide:Upper Rear:Left |
| Парткод: | C244 3457 |
| Деталь: | Guide:Upper Rear:Right |
| Парткод: | C244 3459 |
| Деталь: | Guide Plate:Upper:Shaft:Master Ejection |
| Парткод: | C259 3625 |
| Деталь: | Guide Plate:Lower:Shaft:Master Ejection |
| Парткод: | C259 3626 |
| Деталь: | Flange:Outer:Front:S |
| Парткод: | C262 2420 |
| Деталь: | Stay:Screen:Rear:C |
| Парткод: | C269 2594 |
| Деталь: | Stay:Screen:Assy |
| Парткод: | C259 2595 |
| Деталь: | Seal:Dram Metal Screen:Sub-assy |
| Парткод: | C269 2652 |
| Деталь: | Screen:Shield:Assy |
| Парткод: | C269 2316 |
| Деталь: | Shielding Plate |
| Парткод: | C244 2434 |
| Деталь: | Clamper Seal |
| Парткод: | C229 2605 |
| Деталь: | Dram Metal Screen:Drum:S:Sub-assy |
| Парткод: | C269 2474 |
| Деталь: | SLIDER |
| Парткод: | C229 2428 |
| Деталь: | Flange:Drum:Rear:Inner:Assy |
| Парткод: | C244 2419 |
| Деталь: | Drum Positioning Pin |
| Парткод: | C244 2431 |
| Деталь: | Fixing Plate |
| Парткод: | C229 2423 |
| Деталь: | PLATE NUT |
| Парткод: | C244 2424 |
| Деталь: | Flange:Outer:Rear |
| Парткод: | C262 2422 |
| Деталь: | Drum Drive Disk |
| Парткод: | C257 2410 |
| Деталь: | Fix Stand:Drum:Rear:Sub-assy |
| Парткод: | C262 2442 |
| Деталь: | Drum Shaft |
| Парткод: | C229 2647 |
| Деталь: | Positioning Pin DIA5M4 |
| Парткод: | C244 2450 |
| Деталь: | Spring:Clamp:Open and Close |
| Парткод: | C265 2596 |
| Деталь: | Clamp Protection |
| Парткод: | C236 2595 |
| Деталь: | Clamp:Assy |
| Парткод: | C262 2590 |
| Деталь: | Front Stepped Screw |
| Парткод: | C244 2601 |
| Деталь: | Clamp Base Assy |
| Парткод: | C257 2591 |
| Деталь: | Drive Gear - 50Z |
| Парткод: | C229 2435 |
| Деталь: | Seal:Dram Metal Screen:Front:Duplex |
| Парткод: | C269 2482 |
| Деталь: | Dram Metal Screen Spacer |
| Парткод: | C257 2423 |
| Деталь: | Dram Metal Screen Spacer |
| Парткод: | C257 2424 |
| Деталь: | Screw:Washer:M4x8 |
| Парткод: | C262 2452 |
| Деталь: | Spacer:Clamp:Drum |
| Парткод: | C262 2620 |
| Деталь: | Seal:Flange:Rear |
| Парткод: | C262 2477 |
| Деталь: | Sheet:Clamp:Drum |
| Парткод: | C257 2476 |
| Деталь: | Dram Metal Screen Seal |
| Парткод: | C257 2478 |
| Деталь: | Control Board2 Ground Plate |
| Парткод: | C257 5635 |
| Деталь: | BRACKET |
| Парткод: | C257 5630 |
| Деталь: | Cover No.1 |
| Парткод: | C257 5639 |
| Деталь: | Cover No.2 |
| Парткод: | C257 5640 |
| Деталь: | HDD Cover |
| Парткод: | G056 6005 |
| Деталь: | PCB:ACU:From:Exp:Assy |
| Парткод: | C269 5170 |
| Деталь: | Control Unit Cover |
| Парткод: | C257 5636 |
| Деталь: | Control Board No.2 Guide Plate |
| Парткод: | C257 5638 |
| Деталь: | HD:Toshiba:MK2023GAS:ROHS |
| Парткод: | B095 5762 |
| Деталь: | PCB:IEEE1284:Assy |
| Парткод: | C637 5670 |
| Деталь: | Harness IEEE1284 |
| Парткод: | C637 5200 |
| Деталь: | PCB:Wireless-Adapter |
| Парткод: | B582 5900 |
| Деталь: | Card cover |
| Парткод: | B582 5300 |
| Деталь: | Knob Screw:Groove Type |
| Парткод: | C265 5120 |
| Деталь: | Control Board No.1 Guide Plate |
| Парткод: | C257 5637 |
| Деталь: | PCB:SDRAM-DIMM:64MB:PBF:Assy |
| Парткод: | G330 5720 |
| Деталь: | Cover:Door |
| Парткод: | C262 1255 |
| Деталь: | Decal Paper Feed |
| Парткод: | C239 1354 |
| Деталь: | Bracket:Safety Switch:Cover:Door |
| Парткод: | C269 1268 |
| Деталь: | Door Support Plate |
| Парткод: | C244 1258 |
| Деталь: | Cushion - Front Door |
| Парткод: | C244 1254 |
| Деталь: | Hinge:Door:Assy |
| Парткод: | C262 1260 |
| Деталь: | Sheet:Operation Instructions |
| Парткод: | C269 1350 |
| Деталь: | Door Catch |
| Парткод: | A659 1272 |
| Деталь: | Door Catch Bracket |
| Парткод: | C244 1259 |
| Деталь: | Sheet:Outlet |
| Парткод: | C262 5610 |
| Деталь: | Cover:Left |
| Парткод: | C265 1273 |
| Деталь: | Cover:Scanner:Left |
| Парткод: | C265 1297 |
| Деталь: | Cover:Rear Upper |
| Парткод: | C265 1295 |
| Деталь: | Cap:Card:Control Board |
| Парткод: | C265 1290 |
| Деталь: | Cover:Rear |
| Парткод: | C269 1280 |
| Деталь: | Cover:Scanner:Right |
| Парткод: | C265 1296 |
| Деталь: | Cover:Right Rear |
| Парткод: | C265 1270 |
| Деталь: | Cover:Right Front |
| Парткод: | C265 1267 |
| Деталь: | Left Cover Cap |
| Парткод: | C239 1282 |
| Деталь: | Adjusting Screw:M4x10 |
| Парткод: | C600 2050 |
| Деталь: | Sheet:Emblem:STD:SD462 |
| Парткод: | C269 1345 |
| Деталь: | Bracket:Protect:Exit:Assy |
| Парткод: | C269 6022 |
| Деталь: | Bracket:Protect:Paper Feed:Assy |
| Парткод: | C269 6023 |
| Деталь: | Flat Screw:Knob:M4x10 |
| Парткод: | C265 1285 |
| Деталь: | Wall Chart:English:NA |
| Парткод: | C269 8640 |
| Деталь: | Necr:English:NA |
| Парткод: | C269 8650 |
| Деталь: | Sheet:Safety:English:NA |
| Парткод: | C269 8660 |
| Деталь: | Paper Bank Connector Cap |
| Парткод: | C239 1293 |
| Деталь: | Master Set Instructions Decal |
| Парткод: | C257 5660 |
| Деталь: | Panel:Logo |
| Парткод: | B132 1531 |
| Деталь: | Stopper:Grip:Assy |
| Парткод: | C262 1070 |
| Деталь: | Operating Instructions:IC:STD:English |
| Парткод: | C269 8698 |
| Деталь: | Perating Instructions:IC:GER:NA:English |
| Парткод: | C269 8697 |
| Деталь: | Printer:Driver:IC:STD |
| Парткод: | C269 8674 |
| Деталь: | Cover:Door:Assy |
| Парткод: | C262 1250 |
| Деталь: | Decal:Caution Chart:Gear:Service:Exp |
| Парткод: | C262 1359 |
| Деталь: | Paper Exit Sub-unit:Plate:Exp:Assy |
| Парткод: | C262 4201 |
| Деталь: | Grip Case |
| Парткод: | C250 4387 |
| Деталь: | Swivel Case Plate |
| Парткод: | C250 4380 |
| Деталь: | Swivel Plate |
| Парткод: | C250 4381 |
| Деталь: | Balancer Lever |
| Парткод: | C250 4382 |
| Деталь: | Swivel Link |
| Парткод: | C250 4383 |
| Деталь: | Rear Plate Case |
| Парткод: | C250 4385 |
| Деталь: | Rear Side Fence |
| Парткод: | C250 4370 |
| Деталь: | Side Fence Case |
| Парткод: | C250 4367 |
| Деталь: | Upper - Side Fence Pin |
| Парткод: | C628 4368 |
| Деталь: | Delivery Table Spring |
| Парткод: | C628 4413 |
| Деталь: | Pin - Lower Side Fence |
| Парткод: | C628 4414 |
| Деталь: | Side Fence:Rear Lower:Printing |
| Парткод: | C264 4375 |
| Деталь: | Paper Exit Plate Assy - Front |
| Парткод: | C250 4257 |
| Деталь: | Front Wing |
| Парткод: | C250 4362 |
| Деталь: | Spare Side Fence - Front |
| Парткод: | C250 4392 |
| Деталь: | Front Wing Link |
| Парткод: | C250 4363 |
| Деталь: | Spring Plate Link - Front |
| Парткод: | C250 4364 |
| Деталь: | Front Upper - Side Fence |
| Парткод: | C250 4361 |
| Деталь: | Front Upper Guide |
| Парткод: | C250 4390 |
| Деталь: | Side Fence Guide - Front |
| Парткод: | C628 4391 |
| Деталь: | Rear Table Hinge |
| Парткод: | C628 4450 |
| Деталь: | Knob Screw:Fix:Exit |
| Парткод: | C628 4448 |
| Деталь: | Front Table Hinge |
| Парткод: | C628 4440 |
| Деталь: | Decal - Grip Case |
| Парткод: | C250 4198 |
| Деталь: | Front Side Fence |
| Парткод: | C250 4360 |
| Деталь: | Rear Upper - Side Fence |
| Парткод: | C250 4371 |
| Деталь: | Rear Upper Guide |
| Парткод: | C250 4393 |
| Деталь: | Rear Wing |
| Парткод: | C250 4372 |
| Деталь: | Rear Wing Link |
| Парткод: | C250 4373 |
| Деталь: | Spring Plate Link - Rear |
| Парткод: | C250 4374 |
| Деталь: | Side Fence:Front Lower:Printing |
| Парткод: | C264 4365 |
| Деталь: | Front Plate Case |
| Парткод: | C250 4384 |
| Деталь: | Side Fence Guide - Rear |
| Парткод: | C628 4394 |
| Деталь: | Spare Side Fence - Rear |
| Парткод: | C250 4395 |
| Деталь: | Paper Exit Plate Assy - Rear |
| Парткод: | C250 4260 |
| Деталь: | End Fence:Adhesion |
| Парткод: | C628 4340 |
| Деталь: | End Fence:Sub-assy |
| Парткод: | C628 4331 |
| Деталь: | End Fence Cushion |
| Парткод: | C229 4376 |
| Деталь: | ANTISTATIC BRUSH |
| Парткод: | C233 4430 |
| Деталь: | Fixing Screw |
| Парткод: | C250 4150 |
| Деталь: | Bracket:Adjusting Screw:End Fence |
| Парткод: | C250 4377 |
| Деталь: | Adjust Shaft |
| Парткод: | C229 4373 |
| Деталь: | Shaft:End Fence |
| Парткод: | C264 4086 |
| Деталь: | End Fence Grip |
| Парткод: | C628 4385 |
| Деталь: | End Fence Slider - UU |
| Парткод: | C591 4096 |
| Деталь: | End Fence Rail |
| Парткод: | C250 4341 |
| Деталь: | Slider:End Fence:Middle |
| Парткод: | C629 4354 |
| Деталь: | End Fence Spring |
| Парткод: | C250 4340 |
| Деталь: | End Fence Slider |
| Парткод: | C591 4100 |
| Деталь: | COVER BASE |
| Парткод: | C250 4352 |
| Деталь: | Paper Exit Grip |
| Парткод: | C250 4353 |
| Деталь: | REAR BASE |
| Парткод: | C250 4303 |
| Деталь: | Front Base |
| Парткод: | C250 4300 |
| Деталь: | RIGHT BASE |
| Парткод: | C250 4306 |
| Деталь: | LEFT BASE |
| Парткод: | C250 4305 |
| Деталь: | Decal - Paper Delivery |
| Парткод: | C250 4197 |
| Деталь: | Paper Exit Base |
| Парткод: | C250 4350 |
| Деталь: | Lower Side Fence |
| Парткод: | C250 4317 |
| Деталь: | Lower Guide - Side Fence |
| Парткод: | C250 4310 |
| Деталь: | Side Fence Spacer |
| Парткод: | C250 4316 |
| Деталь: | Slider Side Fence |
| Парткод: | C250 4312 |
| Деталь: | Side Fence Shaft |
| Парткод: | C250 4318 |
| Деталь: | Side Fence Rail |
| Парткод: | C250 4315 |
| Деталь: | Side Fence Spring |
| Парткод: | C250 4311 |
| Деталь: | Lift Up Rack - Paper Table |
| Парткод: | C244 2755 |
| Деталь: | Spring Anchor - Left |
| Парткод: | C244 2827 |
| Деталь: | Gear - 20Z |
| Парткод: | C229 2824 |
| Деталь: | Lift Up Shaft |
| Парткод: | C229 2829 |
| Деталь: | ROLLER |
| Парткод: | 56 062 310 |
| Деталь: | LEFT SIDE PLATE |
| Парткод: | C244 2754 |
| Деталь: | Anchor Paper Tray Right |
| Парткод: | C244 2826 |
| Деталь: | STAY |
| Парткод: | C244 2759 |
| Деталь: | PAPER TRAY |
| Парткод: | C257 2805 |
| Деталь: | Right side plate |
| Парткод: | C244 2751 |
| Деталь: | DC Motor:Paper Feed Tray:24v |
| Парткод: | C259 5814 |
| Деталь: | Magnet Catch Bracket |
| Парткод: | C244 2839 |
| Деталь: | Photo Refiection Sensor:GP2A25 |
| Парткод: | C257 5807 |
| Деталь: | PAD |
| Парткод: | C229 2840 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Screw:M4 |
| Парткод: | AA14 3834 |
| Деталь: | Screw:Lock:M4 |
| Парткод: | C244 2799 |
| Деталь: | Left Stay - Paper Table |
| Парткод: | C244 2786 |
| Деталь: | Paper Table Lower Stay |
| Парткод: | C244 2757 |
| Деталь: | Shaft:Transmission:Paper Tray:Fix |
| Парткод: | C265 2823 |
| Деталь: | Pressure Release Plate |
| Парткод: | C229 2820 |
| Деталь: | Pressure Release Arm - Left |
| Парткод: | C244 2817 |
| Деталь: | Pressure Release Arm - Right |
| Парткод: | C244 2816 |
| Деталь: | Left Adjusting Plate |
| Парткод: | C244 2815 |
| Деталь: | Right Adjusting Plate |
| Парткод: | C244 2814 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Paper Set Sensor Bracket |
| Парткод: | C244 2810 |
| Деталь: | Right Stay - Paper Table |
| Парткод: | C244 2785 |
| Деталь: | Paper Table - Fixed |
| Парткод: | C244 2807 |
| Деталь: | Bracket:Lift Motor |
| Парткод: | C262 5730 |
| Деталь: | Paper Feed Guide Plate Cover |
| Парткод: | C239 2820 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Spacer - 12.2x18x0.25 |
| Парткод: | G024 1234 |
| Деталь: | Paper Size Harness |
| Парткод: | C257 5236 |
| Деталь: | Motor Harness |
| Парткод: | C257 5233 |
| Деталь: | Bracket:Connector:Fix:Duplex Unit |
| Парткод: | C269 4715 |
| Деталь: | Harness:Duplex:Assy |
| Парткод: | C269 5240 |
| Деталь: | Connector bracket |
| Парткод: | C257 2611 |
| Деталь: | Screw:M3:DIA4x5.6 |
| Парткод: | AA14 3542 |
| Деталь: | Spring Plate |
| Парткод: | C257 2612 |
| Деталь: | Stopper:Pawl:Exit |
| Парткод: | C269 1149 |
| Деталь: | Stay:Main:Left:Slide Rail |
| Парткод: | C269 1173 |
| Деталь: | Slide Rail:Duplex Unit |
| Парткод: | C269 1174 |
| Деталь: | Cover:Base:Safety |
| Парткод: | C262 1051 |
| Деталь: | Bracket:Hale Unit |
| Парткод: | C269 3930 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Limit Sensor Bracket |
| Парткод: | C244 2631 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Drum H.P. Sensor Assy |
| Парткод: | C259 2630 |
| Деталь: | Drum HP Harness |
| Парткод: | C257 5224 |
| Деталь: | Sector Gear |
| Парткод: | C229 3585 |
| Деталь: | Driven Gear |
| Парткод: | C229 3586 |
| Деталь: | Spring Plate:Earth:Duplex Unit |
| Парткод: | C269 1176 |
| Деталь: | Stay:Main:Right:Slide Rail |
| Парткод: | C269 1172 |
| Деталь: | Stud:Bracket:Guide:Clamp:Duplex |
| Парткод: | C269 4633 |
| Деталь: | Guide Pin:Positioning:Duplex Unit |
| Парткод: | C269 1171 |
| Деталь: | Tension Spring:Clamp |
| Парткод: | C269 4646 |
| Деталь: | BUSHING |
| Парткод: | B065 5899 |
| Деталь: | Stepped Screw - M6 |
| Парткод: | C244 5125 |
| Деталь: | STEPPED SCREW |
| Парткод: | C244 2633 |
| Деталь: | Operation Panel:Cats-eye:NA:Assy |
| Парткод: | C269 1406 |
| Деталь: | Operation Panel:Cats-eye:EU:Assy |
| Парткод: | C269 1407 |
| Деталь: | Design Plate:Clear:Panel:Left:NA |
| Парткод: | C262 1492 |
| Деталь: | Design Plate:Clear:Panel:Left:EU |
| Парткод: | C262 1494 |
| Деталь: | Design Plate:Clear:Panel:Middle |
| Парткод: | C262 1473 |
| Деталь: | Design Plate:Clear:Panel:Right:NA |
| Парткод: | C262 1491 |
| Деталь: | Design Plate:Clear:Panel:Right:EU |
| Парткод: | C262 1493 |
| Деталь: | Pin:Operation Panel |
| Парткод: | B132 7294 |
| Деталь: | Decal:Power Source:NA |
| Парткод: | C262 1478 |
| Деталь: | Decal:Power Source:EU |
| Парткод: | C262 1479 |
| Деталь: | Case:Operation Panel |
| Парткод: | C262 1470 |
| Деталь: | Keytop:Program |
| Парткод: | C262 1487 |
| Деталь: | Keytop:Contenuance |
| Парткод: | C262 1485 |
| Деталь: | Keytop:Power Source |
| Парткод: | C262 1480 |
| Деталь: | Keytop:Clear |
| Парткод: | C262 1488 |
| Деталь: | Keytop:Try Print |
| Парткод: | C262 1483 |
| Деталь: | Keytop:Start |
| Парткод: | C262 1482 |
| Деталь: | Keytop:Stop |
| Парткод: | C262 1481 |
| Деталь: | Keytop:10key |
| Парткод: | C262 1484 |
| Деталь: | LCD:HVGA:SH:BL |
| Парткод: | B213 5225 |
| Деталь: | PCB:Operation Sub-unit:Right |
| Парткод: | C262 5168 |
| Деталь: | Touch Panel:HVGA |
| Парткод: | B213 5222 |
| Деталь: | Keytop:Left |
| Парткод: | C262 1490 |
| Деталь: | PCB:Operation Sub-unit:Left |
| Парткод: | C262 5169 |
| Деталь: | Bracket:LCDC |
| Парткод: | C262 1520 |
| Деталь: | PCB:Lcdc:Cats-eye:NA:Assy |
| Парткод: | C269 5164 |
| Деталь: | PCB:Lcdc:Cats-eye:EU:Assy |
| Парткод: | C269 5166 |
| Деталь: | Cover:Main Switch |
| Парткод: | C262 1371 |
| Деталь: | Cover:LCDC |
| Парткод: | C262 1521 |
| Деталь: | Nylon Clamp |
| Парткод: | C262 1499 |
| Деталь: | Sheet:Preventfence:Left |
| Парткод: | C262 1495 |
| Деталь: | Sheet:Preventfence:Right |
| Парткод: | C262 1496 |
| Деталь: | Lens:LED:Lower |
| Парткод: | C262 1498 |
| Деталь: | Lens:LED:Upper |
| Парткод: | C262 1497 |
| Деталь: | Shadeing Plate:Operation Panel |
| Парткод: | C269 5632 |
| Деталь: | Bracket:Harness:DC Solenoid |
| Парткод: | C269 4958 |
| Деталь: | Arm:Pressure Roller:Front:Assy |
| Парткод: | C269 4931 |
| Деталь: | Ring - M14 |
| Парткод: | C229 3207 |
| Деталь: | BUSHING - 6X10X6 |
| Парткод: | AA08 2101 |
| Деталь: | Plate:Ball Bearing:Pressure Roller |
| Парткод: | C269 4961 |
| Деталь: | Guide:Holder:Cleaning Roller |
| Парткод: | C269 4965 |
| Деталь: | Plate:Holder:Cleaning Roller |
| Парткод: | C269 4968 |
| Деталь: | Spring:Cleaning Roller |
| Парткод: | C269 4969 |
| Деталь: | STEPPED SCREW |
| Парткод: | H515 2182 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | AA14 3560 |
| Деталь: | Lever:Cleaning Roller |
| Парткод: | C269 4967 |
| Деталь: | Bracket:Lever:Cleaning Roller |
| Парткод: | C269 4966 |
| Деталь: | DC Solenoid:24V:1/5DUTY |
| Парткод: | AX12 0091 |
| Деталь: | Bracket:Dc Solenoid |
| Парткод: | C269 4964 |
| Деталь: | Spring Plate:Guide:Paper:Front |
| Парткод: | C269 4962 |
| Деталь: | Spring Plate:Guide:Paper:Rear |
| Парткод: | C269 4963 |
| Деталь: | Harness:Feed Paper Again:Assy |
| Парткод: | C269 5243 |
| Деталь: | Stay:Coupling:Arm:Pressure Roller |
| Парткод: | C269 4951 |
| Деталь: | Arm:Pressure Roller:Rear:Assy |
| Парткод: | C269 4941 |
| Деталь: | Bushing:Cleaning Roller |
| Парткод: | C269 4993 |
| Деталь: | Gear:Timing Pulley:S3M28T |
| Парткод: | C269 1164 |
| Деталь: | Pulley - MM19 Press Fit |
| Парткод: | AB03 0758 |
| Деталь: | Gear:Connecting:Cleaning Roller |
| Парткод: | C269 4991 |
| Деталь: | Gear:Cleaning Roller |
| Парткод: | C269 4992 |
| Деталь: | Drum Stay:Leading Edge |
| Парткод: | C269 4956 |
| Деталь: | Stopper:Leading Edge |
| Парткод: | C269 4957 |
| Деталь: | Arm:Roller:Feed Paper Again:Rear |
| Парткод: | C269 4974 |
| Деталь: | Shaft:Roller:Feed Paper Again |
| Парткод: | C269 4971 |
| Деталь: | Tension Spring:DC Solenoid:Roller: |
| Парткод: | C269 4979 |
| Деталь: | Arm:Roller:Feed Paper Again:Front |
| Парткод: | C269 4972 |
| Деталь: | Roller:Feed Paper Again |
| Парткод: | C269 4973 |
| Деталь: | Shaft:Roller:Feed Paper Again |
| Парткод: | C269 4975 |
| Деталь: | Pierce Ring:DIA8SP |
| Парткод: | C269 4978 |
| Деталь: | Block:Release:Leading Edge |
| Парткод: | C269 4977 |
| Деталь: | Roller:Feed Paper Again |
| Парткод: | C269 4976 |
| Деталь: | Shaft:Contact Point:Duplex |
| Парткод: | C269 3205 |
| Деталь: | Decal - Left Hand |
| Парткод: | C249 1971 |
| Деталь: | Decal - Right Hand |
| Парткод: | C249 1972 |
| Деталь: | Upper Base Cover |
| Парткод: | C257 2160 |
| Деталь: | Grip:Supply:Plotter |
| Парткод: | C244 2158 |
| Деталь: | Upoper Guide Plate |
| Парткод: | C257 2171 |
| Деталь: | Guide Plate Discharge Brush |
| Парткод: | C257 2205 |
| Деталь: | Guide:Roller:Tension |
| Парткод: | C259 2042 |
| Деталь: | Upper Base Front Side Plate |
| Парткод: | C259 2149 |
| Деталь: | Upper Tension Roller |
| Парткод: | C257 2002 |
| Деталь: | Master Duct Sensor |
| Парткод: | C257 5854 |
| Деталь: | Platenroller Plate Bracket |
| Парткод: | C257 2156 |
| Деталь: | Side Plate:Rear:Upper Base:Peen |
| Парткод: | C269 2154 |
| Деталь: | Lever Knob |
| Парткод: | C238 2037 |
| Деталь: | Open and Close Tension Spring |
| Парткод: | C257 2172 |
| Деталь: | Open and Close Sever |
| Парткод: | C257 2162 |
| Деталь: | Platenroller DIA14-10 45 |
| Парткод: | C259 2081 |
| Деталь: | Roller:Pull Out:Master |
| Парткод: | C269 2140 |
| Деталь: | Platen Gear |
| Парткод: | C236 2082 |
| Деталь: | TORQUE LIMITER |
| Парткод: | C257 2018 |
| Деталь: | Bushing- 6mm |
| Парткод: | H012 1181 |
| Деталь: | BEARING HOLDER |
| Парткод: | C244 2266 |
| Деталь: | Optics Sensor:Double Feed SN |
| Парткод: | C257 5857 |
| Деталь: | Double Feed Sensor Upper Bracket |
| Парткод: | C239 2925 |
| Деталь: | Master Optics Sensor |
| Парткод: | C257 5851 |
| Деталь: | Cable Bracket |
| Парткод: | C239 2929 |
| Деталь: | Tension Spring:Pressure:Feed Roller:9.8N |
| Парткод: | C265 2901 |
| Деталь: | Feed Roller-upper |
| Парткод: | C244 2905 |
| Деталь: | Pressure Release Lock Arm - Left |
| Парткод: | C244 2899 |
| Деталь: | Left Pressure Arm |
| Парткод: | C244 2894 |
| Деталь: | Pressure Release Shaft |
| Парткод: | C244 2900 |
| Деталь: | Right Pressure Arm |
| Парткод: | C244 2893 |
| Деталь: | Pressure Release Lock Arm - Right |
| Парткод: | C244 2898 |
| Деталь: | Registration Sensor Bracket |
| Парткод: | C244 2921 |
| Деталь: | Feed Harness |
| Парткод: | C257 5284 |
| Деталь: | Photo Refiection Sensor:GP2A25 |
| Парткод: | C257 5807 |
| Деталь: | Guide Plate:Feed Roller:Upper:Assy |
| Парткод: | C262 2926 |
| Деталь: | Spacer:Guide Plate |
| Парткод: | C269 2759 |
| Деталь: | Lower Feed Roller Guide Plate |
| Парткод: | C239 2927 |
| Деталь: | Bracket:Feed Roller:Left |
| Парткод: | C269 2923 |
| Деталь: | Feed Roller:Lower |
| Парткод: | C265 2906 |
| Деталь: | Right Bracket - Guide Plate |
| Парткод: | C244 2922 |
| Деталь: | Cam Follower Plate |
| Парткод: | C244 5126 |
| Деталь: | Registration Roller Pulley - 14Z |
| Парткод: | C229 2907 |
| Деталь: | Plate:Entrance:Guide Plate |
| Парткод: | C262 2929 |
| Деталь: | Base:Duplex Unit:Assy |
| Парткод: | C269 4701 |
| Деталь: | Sheet:Connector:Moveable |
| Парткод: | C269 4718 |
| Деталь: | Spring Plate:Plate:Adjusting Pin |
| Парткод: | C269 4762 |
| Деталь: | Bracket:Supporter:Worm Gear |
| Парткод: | C269 4785 |
| Деталь: | Lever:Stopper:Pressure Roller:Peen |
| Парткод: | C269 4757 |
| Деталь: | Stopper:Front |
| Парткод: | C269 4751 |
| Деталь: | Adjusting Pin:Gap:Arm:Peen |
| Парткод: | C269 4756 |
| Деталь: | Adjusting Pin:Gap:Arm:Peen |
| Парткод: | C269 4752 |
| Деталь: | Screw:DIA6x1.7 |
| Парткод: | C269 4789 |
| Деталь: | Spring:Stopper:Pressure Roller |
| Парткод: | C269 4761 |
| Деталь: | Holder:Pressure Roller |
| Парткод: | C269 4768 |
| Деталь: | Gear:Sector |
| Парткод: | C269 4787 |
| Деталь: | Encoder:Adjusting Pin |
| Парткод: | C269 4784 |
| Деталь: | Spring:Stopper:Gear:Sector |
| Парткод: | C269 4781 |
| Деталь: | Adjusting Screw:Spring:Pressure |
| Парткод: | C269 4783 |
| Деталь: | Spring:Base:Pressure Roller |
| Парткод: | C269 4767 |
| Деталь: | Pressure Spring Nut |
| Парткод: | C231 3127 |
| Деталь: | Gear:Adjusting Pin:Pressure Roller |
| Парткод: | C269 4774 |
| Деталь: | Bracket:Harness:Rear:Duplex Unit |
| Парткод: | C269 4743 |
| Деталь: | Stopper:Auxiliary:Upper Lower |
| Парткод: | C269 4745 |
| Деталь: | Supporter:Arm:Pressure Roller:Front |
| Парткод: | C269 4760 |
| Деталь: | Bracket:Harness:Front:Duplex Unit |
| Парткод: | C269 4742 |
| Деталь: | Ring:Spring |
| Парткод: | C269 4782 |
| Деталь: | Bracket:Pulley:Spring:Counter:Assy |
| Парткод: | C269 4710 |
| Деталь: | Spring:Adjusting Pin |
| Парткод: | C269 4780 |
| Деталь: | Stopper:Auxiliary:Right Front |
| Парткод: | C269 4746 |
| Деталь: | Flat Screw:Knob:M4x10 |
| Парткод: | C265 1285 |
| Деталь: | Photointerruptor |
| Парткод: | C244 5805 |
| Деталь: | Bracket:Sensor:Encoder |
| Парткод: | C269 1108 |
| Деталь: | Drum Shaft:Drive:Assy |
| Парткод: | C269 1022 |
| Деталь: | Harness:Connecting:Sensor:Assy |
| Парткод: | C269 5254 |
| Деталь: | Bracket:Positioning Sensor |
| Парткод: | C269 1106 |
| Деталь: | Harness:Connecting:HP:Encoder:Assy |
| Парткод: | C269 5244 |
| Деталь: | Bracket:Pressure Release |
| Парткод: | C269 1146 |
| Деталь: | Stopper:Pawl:Moveable |
| Парткод: | C269 1145 |
| Деталь: | Supporting Plate:Pressure Release |
| Парткод: | C269 1144 |
| Деталь: | DC Solenoid |
| Парткод: | C257 5872 |
| Деталь: | Release Shaft Arm |
| Парткод: | C229 3164 |
| Деталь: | Spring:Pressure Release |
| Парткод: | C265 3166 |
| Деталь: | Bracket:Base:Upper |
| Парткод: | C269 1069 |
| Деталь: | Bracket:Base:Fix:Duplex |
| Парткод: | C269 1068 |
| Деталь: | Bracket:Harness Clamp |
| Парткод: | C269 1063 |
| Деталь: | Guide Plate:Brushless Motor:Main |
| Парткод: | C269 1064 |
| Деталь: | Printed Circuit Board:Motor:Drive |
| Парткод: | C269 5150 |
| Деталь: | Bracket:Base |
| Парткод: | C269 1062 |
| Деталь: | Brushless Motor:DC24V:114W |
| Парткод: | C259 5800 |
| Деталь: | Torque Limiter:Gear:55KGF CM |
| Парткод: | C269 1061 |
| Деталь: | Hexagon Screw - M5x4 |
| Парткод: | C265 1063 |
| Деталь: | Base:Brushless Motor |
| Парткод: | C269 1060 |
| Деталь: | Guide Plate:Power Source |
| Парткод: | C269 5615 |
| Деталь: | DC POWER SUPPLY |
| Парткод: | C269 5300 |
| Деталь: | Harness:Main Switch:Assy |
| Парткод: | C269 5216 |
| Деталь: | Driver Brushless Motor Bracket |
| Парткод: | C244 5622 |
| Деталь: | Stepper Motor:Feed Paper Again |
| Парткод: | C269 5812 |
| Деталь: | Bracket:Stepper Motor |
| Парткод: | C269 4921 |
| Деталь: | Gear:Transmission |
| Парткод: | C269 4924 |
| Деталь: | Timing Belt:S2M:96 |
| Парткод: | C269 4925 |
| Деталь: | Paper Exit Unit Harness(Option LS 3000R) |
| Парткод: | C257 5201 |
| Деталь: | Power Supply Cord:NA:Assy |
| Парткод: | C262 5292 |
| Деталь: | Power Supply Cord:EU:Assy |
| Парткод: | C262 5290 |
| Деталь: | Stepper Motor:Drive:Clamp |
| Парткод: | C269 5825 |
| Деталь: | Bracket:Motor:Drive:Clamp:Duplex |
| Парткод: | C269 4645 |
| Деталь: | Rubber Bushing - M4 |
| Парткод: | C403 1899 |
| Деталь: | Tension Spring:Clamp |
| Парткод: | C269 4646 |
| Деталь: | Pulley:Motor:Drive:Clamp:Duplex |
| Парткод: | C269 4642 |
| Деталь: | Harness:Connecting:Pump:Exit:Assy |
| Парткод: | C269 5261 |
| Деталь: | Paper Feed Unit Assy |
| Парткод: | C257 2744 |
| Деталь: | Support Plate - Right Lower |
| Парткод: | C244 1291 |
| Деталь: | Tension Spring:Rise:Paper Tray |
| Парткод: | C265 2828 |
| Деталь: | Paper feed Cover |
| Парткод: | C244 2784 |
| Деталь: | Magnet Catch:44.1V |
| Парткод: | AG07 0504 |
| Деталь: | Side Fence Grip |
| Парткод: | C244 2804 |
| Деталь: | Left Side Fence Slider Assy |
| Парткод: | C235 2796 |
| Деталь: | Side Fence Stopper |
| Парткод: | C229 2793 |
| Деталь: | Paper Size Sensor PCB |
| Парткод: | C257 5155 |
| Деталь: | Screw - M4X6 |
| Парткод: | 55 061 536 |
| Деталь: | Spring Washer - Rotating Table |
| Парткод: | 50 700 923 |
| Деталь: | Paper Feed Side Fence Pad |
| Парткод: | C257 2780 |
| Деталь: | Paper Feed Side Fence Pad |
| Парткод: | C257 2781 |
| Деталь: | Rubber Plate Lever |
| Парткод: | C209 5092 |
| Деталь: | Left Side Fence Assy |
| Парткод: | C235 2802 |
| Деталь: | RIGHT SIDE FENCE |
| Парткод: | C235 2791 |
| Деталь: | Right Side Fence Slider Assy |
| Парткод: | C235 2786 |
| Деталь: | Decal - Paper Size |
| Парткод: | C239 2951 |
| Деталь: | PAPER TRAY |
| Парткод: | C244 2775 |
| Деталь: | Side Fence Rack |
| Парткод: | C229 2781 |
| Деталь: | GROUNDING PLATE |
| Парткод: | C229 2784 |
| Деталь: | Tension Spring Plate |
| Парткод: | C229 2794 |
| Деталь: | Gear - 16Z |
| Парткод: | G011 3305 |
| Деталь: | WAVE WASHER |
| Парткод: | 54 432 713 |
| Деталь: | Photo Refiection Sensor:Original Table |
| Парткод: | AW01 0112 |
| Деталь: | Side Fence Rack - Right |
| Парткод: | C229 2780 |
| Деталь: | Spring Plate - Paper Tray |
| Парткод: | C229 2952 |
| Деталь: | GROUND PLATE |
| Парткод: | C244 2955 |
| Деталь: | Paper Size Harness |
| Парткод: | C257 5236 |
| Деталь: | PAPER TRAY |
| Парткод: | C257 2767 |
| Деталь: | Spring Plate |
| Парткод: | C229 2954 |
| Деталь: | Bracket:Sensor:Paper Tray |
| Парткод: | C244 2777 |
| Деталь: | Harness Holder |
| Парткод: | C244 2778 |
| Деталь: | Paper Tray - Sub |
| Парткод: | C245 2775 |
| Деталь: | Lock Lever - Left Side Fence |
| Парткод: | C235 2819 |
| Деталь: | Spring Plate:Lever:Lock:Right |
| Парткод: | C235 2821 |
| Деталь: | Pad:Lever:Lock |
| Парткод: | C235 2818 |
| Деталь: | Left Lock Lever Spring Plate Assy |
| Парткод: | C235 2820 |
| Деталь: | Lock Lever - Right Side Fence |
| Парткод: | C235 2815 |
| Деталь: | Spring Plate:Lever:Lock:Right |
| Парткод: | C235 2817 |
| Деталь: | Right Lock Lever Spring Plate Assy |
| Парткод: | C235 2816 |
| Деталь: | Screw - DIA5 |
| Парткод: | AA14 3861 |
| Деталь: | Decal - Side Fence - Right |
| Парткод: | C235 2813 |
| Деталь: | Decal - Side Fence - Left |
| Парткод: | C235 2814 |
| Деталь: | Spacer:Magnet Catch:Side Fence |
| Парткод: | C257 2812 |
| Деталь: | Cover:Exit |
| Парткод: | C269 3303 |
| Деталь: | Discharge Brush:Air Knife:Small |
| Парткод: | C269 3307 |
| Деталь: | Discharge Brush:Air Knife:Middle |
| Парткод: | C269 3306 |
| Деталь: | Base:Air Knife |
| Парткод: | C269 3301 |
| Деталь: | Fan:PWM:DC24V:Air Knife |
| Парткод: | C269 5824 |
| Деталь: | Harness:Air Knife:Assy |
| Парткод: | C269 5234 |
| Деталь: | Duct:Air Knife |
| Парткод: | C269 3302 |
| Деталь: | Drum Stay:Exit:Rear Upper |
| Парткод: | C269 3857 |
| Деталь: | Bracket:Guide:Exit |
| Парткод: | C269 4446 |
| Деталь: | Sheet:Guide:Exit:Rear |
| Парткод: | C269 4494 |
| Деталь: | Guide:Exit:Right Rear:Adhesion |
| Парткод: | C269 4493 |
| Деталь: | Sheet:Guide:Exit:Front |
| Парткод: | C269 4492 |
| Деталь: | Guide:Exit:Right Front:Adhesion |
| Парткод: | C269 4491 |
| Деталь: | Drum Stay:Exit |
| Парткод: | C269 3855 |
| Деталь: | Drum Stay:Exit:Front Upper |
| Парткод: | C269 3858 |
| Деталь: | Bracket:Exit:Rear:Peen |
| Парткод: | C269 4404 |
| Деталь: | Bracket:Exit:Front:Peen |
| Парткод: | C269 4401 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | C218 2525 |
| Деталь: | Separation Unit:Exit:Assy |
| Парткод: | C269 3003 |
| Деталь: | Drum Stay:Exit:Assy |
| Парткод: | C269 1292 |
| Деталь: | ANTISTATIC BRUSH |
| Парткод: | C233 4405 |
| Деталь: | DUPLEX UNIT |
| Парткод: | C269 0272 |
| Деталь: | Stay:Tray:Feed Paper |
| Парткод: | C269 4901 |
| Деталь: | Bracket:Sensor:Tray |
| Парткод: | C269 4904 |
| Деталь: | Photo Refiection Sensor:Ps117ed1 |
| Парткод: | AW01 0109 |
| Деталь: | Harness:Tray:Feed Paper Again:Assy |
| Парткод: | C269 5242 |
| Деталь: | Flat Cable:Connecting:Duplex:Assy |
| Парткод: | C269 5245 |
| Деталь: | Harness:Connecting:Duplex:Assy |
| Парткод: | C269 5246 |
| Деталь: | Stay:Clamp:Tray:Feed Paper Again |
| Парткод: | C269 4918 |
| Деталь: | Bracket:Fan |
| Парткод: | C269 4913 |
| Деталь: | Fan:MM40x20 |
| Парткод: | C269 5841 |
| Деталь: | Duct:Leading Edge:Tray |
| Парткод: | C269 4912 |
| Деталь: | Support Stay:Tray:Feed Paper Again |
| Парткод: | C269 4909 |
| Деталь: | Bushing - 10x14x5.9 |
| Парткод: | C203 5135 |
| Деталь: | SCREW:CONTACT POINT:M3 |
| Парткод: | B700 4867 |
| Деталь: | Harness:Ground Wire:Feed Paper |
| Парткод: | C269 5249 |
| Деталь: | Tray:Feed Paper Again:Assy |
| Парткод: | C269 4900 |
| Деталь: | Stay:Sensor:Master:1:Assy |
| Парткод: | C269 2941 |
| Деталь: | Guide Plate:Upper:Pressure Roller |
| Парткод: | C269 2751 |
| Деталь: | Guide Plate:Lower:Pressure Roller |
| Парткод: | C269 2750 |
| Деталь: | Cover:Sensor:Master |
| Парткод: | C269 2902 |
| Деталь: | Drum Harness |
| Парткод: | C257 5208 |
| Деталь: | Cover:Sensor:Master |
| Парткод: | C269 2859 |
| Деталь: | Bracket:Sensor:Master:1 |
| Парткод: | C269 5739 |
| Деталь: | Drum1 Master Sensor |
| Парткод: | C257 5850 |
| Деталь: | Cover:Stay:Machine:Plotter |
| Парткод: | C262 2262 |
| Деталь: | Cover:Flat Cable:Machine Or Copier |
| Парткод: | C262 2263 |
| Деталь: | Bracket:Sensor:Clamp |
| Парткод: | C262 2265 |
| Деталь: | Harness:Connecting:Plotter:Assy |
| Парткод: | C262 5283 |
| Деталь: | SCREW |
| Парткод: | AA14 3569 |
| Деталь: | Connector Spring |
| Парткод: | C244 2267 |
| Деталь: | Stay:Main:Plotter:Adhesion |
| Парткод: | C269 2259 |
| Деталь: | Magnet Catch:Lock:Plotter |
| Парткод: | C262 2275 |
| Деталь: | PUSH SWITCH |
| Парткод: | AW50 0012 |
| Деталь: | Sheet:Grip:Cover |
| Парткод: | C265 5735 |
| Деталь: | Cover:Harness:Paper Feed Sub-unit |
| Парткод: | C265 5733 |
| Деталь: | Paper Feed Guide Plate |
| Парткод: | C244 2845 |
| Деталь: | Micro Switch Lock Spacer |
| Парткод: | C257 2265 |
| Деталь: | Lock Stopper |
| Парткод: | C257 2263 |
| Деталь: | Lock Tension Spring |
| Парткод: | C257 2261 |
| Деталь: | Master Eject Lock Solenoid |
| Парткод: | C257 3575 |
| Деталь: | Screw:Plotter:Stopper:Lock |
| Парткод: | C262 2264 |
| Деталь: | Guard:NJ-16:97mm |
| Парткод: | C262 2270 |
| Деталь: | Drum2 Master Sensor |
| Парткод: | C257 5852 |
| Деталь: | Micro Harness |
| Парткод: | C256 3576 |
| Деталь: | Plate:Flat Cable:Upper |
| Парткод: | C262 2246 |
| Деталь: | Harness:Drum:Sensor:Assy |
| Парткод: | C269 5258 |
| Деталь: | Screw:M2x7 |
| Парткод: | C269 2760 |
| Деталь: | Front Stay Bracket |
| Парткод: | C244 1811 |
| Деталь: | Tension Bracket |
| Парткод: | C244 1849 |
| Деталь: | Tension Spring:Tension:8215MN |
| Парткод: | C265 1816 |
| Деталь: | Bracket:Idler:Middle:Peen |
| Парткод: | C264 1846 |
| Деталь: | Bracket:Idler:Left Front:Peen |
| Парткод: | B180 1824 |
| Деталь: | Slide Rail - 2 |
| Парткод: | A267 1817 |
| Деталь: | 1st Slide Rail |
| Парткод: | A193 1816 |
| Деталь: | MIRROR HOLDER |
| Парткод: | A267 1777 |
| Деталь: | Guide - FPC |
| Парткод: | A267 1776 |
| Деталь: | 3rd Mirror |
| Парткод: | AC03 0123 |
| Деталь: | Carriage:No.2:Assy |
| Парткод: | C259 1672 |
| Деталь: | Timing Pulley - 60T |
| Парткод: | AB03 0630 |
| Деталь: | Bracket:Idler:Left Inner Rear:Peen |
| Парткод: | B180 1826 |
| Деталь: | Insulating Sheet - Side Plate |
| Парткод: | A267 1819 |
| Деталь: | Guide:Flexible Board |
| Парткод: | C259 1816 |
| Деталь: | Ball Bearing - M8 |
| Парткод: | A193 1829 |
| Деталь: | Scanner Wire |
| Парткод: | AA05 0107 |
| Деталь: | Front Pulley - Wire Drive |
| Парткод: | AB03 2066 |
| Деталь: | Shaft:Scanner:Drive |
| Парткод: | C264 1825 |
| Деталь: | Timing Belt - B60S2M186 |
| Парткод: | C236 1822 |
| Деталь: | Rear Pulley - Wire Drive |
| Парткод: | AB03 2067 |
| Деталь: | Stepper Motor Assy |
| Парткод: | C257 5841 |
| Деталь: | Slow Down Flange - MM15 |
| Парткод: | C236 1829 |
| Деталь: | Rear Stay Bracket |
| Парткод: | C244 1812 |
| Деталь: | MOTOR BRACKET |
| Парткод: | C244 1817 |
| Деталь: | Pulley - Slow Down Assy |
| Парткод: | C236 1812 |
| Деталь: | Timing Belt - B60S2M140 |
| Парткод: | C236 1821 |
| Деталь: | Stepper Motor Base |
| Парткод: | C244 1825 |
| Деталь: | Bracket:Power Supply Cord:Duplex |
| Парткод: | C269 5611 |
| Деталь: | Guide Plate:PCB:Lower |
| Парткод: | C269 5617 |
| Деталь: | Bracket:Illuminate |
| Парткод: | C269 5623 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | LED:Illuminate |
| Парткод: | C269 5890 |
| Деталь: | Harness:Illuminate:Assy |
| Парткод: | C269 5257 |
| Деталь: | Supporting Plate:Grip:Rear Right |
| Парткод: | C262 1079 |
| Деталь: | Cover:Pulley:Drive:Paper Feed |
| Парткод: | C269 2931 |
| Деталь: | Bracket:Interface:Duplex |
| Парткод: | C269 5625 |
| Деталь: | Bracket:Key Counter:ADF |
| Парткод: | C269 5624 |
| Деталь: | Bracket:Harness:Main |
| Парткод: | C269 5679 |
| Деталь: | HDD Ground Plate |
| Парткод: | C236 5673 |
| Деталь: | Harness:Connecting:ADF:Assy |
| Парткод: | C269 5274 |
| Деталь: | GROUNDING PLATE |
| Парткод: | C591 1259 |
| Деталь: | Bracket:PCB:Lower:Duplex |
| Парткод: | C269 5619 |
| Деталь: | Plotter:Exp:Assy |
| Парткод: | C269 1905 |
| Деталь: | Plotter Slide Rail Screw |
| Парткод: | C244 1994 |
| Деталь: | Master Misfeed Removal Decal |
| Парткод: | C257 1978 |
| Деталь: | FRONT COVER |
| Парткод: | C257 1977 |
| Деталь: | Front Torsion Spring |
| Парткод: | C257 2175 |
| Деталь: | Magnet Catch:Assy |
| Парткод: | C244 2198 |
| Деталь: | Lock Bracket |
| Парткод: | C257 2178 |
| Деталь: | Upper Base Front Shaft |
| Парткод: | C257 1980 |
| Деталь: | Grip:Supply:Plotter |
| Парткод: | C244 2158 |
| Деталь: | Spring Plate |
| Парткод: | C259 2201 |
| Деталь: | Front Bracket |
| Парткод: | C244 2193 |
| Деталь: | Spacer - 10x18x1 |
| Парткод: | C209 6163 |
| Деталь: | Master Pressure Spring |
| Парткод: | C236 2190 |
| Деталь: | Flange Master Front DIA46 |
| Парткод: | C257 2196 |
| Деталь: | Master Flange - Front |
| Парткод: | C257 2197 |
| Деталь: | Stay:Flange:Front |
| Парткод: | C244 2188 |
| Деталь: | Shaft:Flange:Master:Right |
| Парткод: | C244 2187 |
| Деталь: | Upper Base Stopper Pin |
| Парткод: | C257 1970 |
| Деталь: | Master Flange Spring |
| Парткод: | C229 2189 |
| Деталь: | Stay - Plotter Cover |
| Парткод: | C229 1979 |
| Деталь: | Thermal Head Guide |
| Парткод: | C257 2137 |
| Деталь: | Lower Master Plate Guide |
| Парткод: | C257 2136 |
| Деталь: | REAR COVER |
| Парткод: | C257 1983 |
| Деталь: | Flange Master Rear DIA46 |
| Парткод: | C257 2184 |
| Деталь: | Master Flange - Rear |
| Парткод: | C257 2185 |
| Деталь: | Cover:Plotter |
| Парткод: | C265 2132 |
| Деталь: | Decal:Caution Chart:Harness:Service |
| Парткод: | C262 1356 |
| Деталь: | Spacer - 16mm |
| Парткод: | B065 4180 |
| Деталь: | Rear Torsion Spring |
| Парткод: | C257 2176 |
| Деталь: | Upper Base:Transport:Assy |
| Парткод: | C269 1937 |
| Деталь: | Guide Plate Spacer |
| Парткод: | C259 2140 |
| Деталь: | Caution Decal:Master Set |
| Парткод: | C259 1351 |
| Деталь: | Fan:MM40x20 |
| Парткод: | C269 5832 |
| Деталь: | Bushing - 10mm |
| Парткод: | 50 530 419 |
| Деталь: | Supporting Plate:Duct:Hale |
| Парткод: | C269 3878 |
| Деталь: | Bracket:Polarize:Fan |
| Парткод: | C269 3868 |
| Деталь: | Bracket:Paper Feed Sensor:Hale Unit |
| Парткод: | C269 3877 |
| Деталь: | Photo Refiection Sensor:Ps117ed1 |
| Парткод: | AW01 0109 |
| Деталь: | Short:Transport Belt:Assy |
| Парткод: | C269 3970 |
| Деталь: | Transport Belt:Short:Hale:Adhesion |
| Парткод: | C269 3951 |
| Деталь: | Transport Belt:Long:Hale:Adhesion |
| Парткод: | C269 3950 |
| Деталь: | Timing Belt:S2M200 |
| Парткод: | C269 3957 |
| Деталь: | Timing pulley |
| Парткод: | C229 3872 |
| Деталь: | Roller:Driven:Hale:Press Fit |
| Парткод: | C269 3961 |
| Деталь: | Shaft:Driven:Transport Belt |
| Парткод: | C269 3920 |
| Деталь: | Base:Hale Unit |
| Парткод: | C269 3860 |
| Деталь: | Harness:Paper Feed Sensor:Assy |
| Парткод: | C269 5256 |
| Деталь: | Long:Transport Belt:Assy |
| Парткод: | C269 3981 |
| Деталь: | Roller:Drive:Hale |
| Парткод: | C269 3972 |
| Деталь: | Bracket:Safety Switch |
| Парткод: | C269 5644 |
| Деталь: | Magnet Catch:Assy |
| Парткод: | AG07 1012 |
| Деталь: | Safety switch spring |
| Парткод: | C229 5646 |
| Деталь: | LEVER:SAFETY SWITCH |
| Парткод: | C269 5645 |
| Деталь: | PUSH SWITCH |
| Парткод: | C257 5856 |
| Деталь: | Left cover bracket |
| Парткод: | C244 1272 |
| Деталь: | Rotary Catch |
| Парткод: | AG07 1009 |
| Деталь: | Supporting Plate:Side Plate:Right Upper |
| Парткод: | C244 1273 |
| Деталь: | Bracket:Drum:Left |
| Парткод: | C244 2620 |
| Деталь: | Bracket:Standard:Drum:Right |
| Парткод: | C269 1191 |
| Деталь: | Drum Position Plate - Small |
| Парткод: | C229 2626 |
| Деталь: | Total Counter Bracket |
| Парткод: | C244 5614 |
| Деталь: | Total Counter:7FIG:24V |
| Парткод: | AX31 0049 |
| Деталь: | Harness:Connecting:Counter:Assy |
| Парткод: | C262 5286 |
| Деталь: | Bracket:Printed Circuit Board:LED |
| Парткод: | C262 5627 |
| Деталь: | LED PCB |
| Парткод: | C257 5146 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | AA14 3076 |
| Деталь: | Base:Hale Unit |
| Парткод: | C269 3860 |
| Деталь: | Guide Plate:Paper:Left:Peen |
| Парткод: | C269 3875 |
| Деталь: | Exit Roller:Assy |
| Парткод: | C269 3865 |
| Деталь: | Guide Plate:Paper:Left |
| Парткод: | C269 3864 |
| Деталь: | Guide Plate:Paper:Right |
| Парткод: | C269 3863 |
| Деталь: | Guide Plate:Paper:Right:Peen |
| Парткод: | C269 3872 |
| Деталь: | Cover:Harness:Fan:Hale Unit |
| Парткод: | C269 3879 |
| Деталь: | Bracket:Fan:Right |
| Парткод: | C269 3870 |
| Деталь: | Bracket:Fan:Left |
| Парткод: | C269 3871 |
| Деталь: | Fan:MM40x28 |
| Парткод: | C269 5830 |
| Деталь: | Cover:Tube:Gate |
| Парткод: | C269 3861 |
| Деталь: | Pipe:Gate:Adhesion |
| Парткод: | C269 3935 |
| Деталь: | Hose Band |
| Парткод: | C244 2530 |
| Деталь: | Tube:Gate:Nozzle |
| Парткод: | C269 3907 |
| Деталь: | Tube:Long:Gate:Nozzle |
| Парткод: | C269 3934 |
| Деталь: | Joint:Exit:Connecting:Tube |
| Парткод: | C269 3933 |
| Деталь: | Tube:Pump:Exchange Powl |
| Парткод: | C269 3133 |
| Деталь: | Gear:Drive:Adjusting Plate |
| Парткод: | C269 3885 |
| Деталь: | Gear:Middle:Adjusting Plate |
| Парткод: | C269 3886 |
| Деталь: | Bracket:Adjusting Plate |
| Парткод: | C269 3880 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Stepper Motor:Dia42:Plotter:Assy |
| Парткод: | C267 5844 |
| Деталь: | Bracket:Shaft:Adjusting Plate |
| Парткод: | C269 3881 |
| Деталь: | Cam:Open and Close:Clamp:Transport |
| Парткод: | C269 3862 |
| Деталь: | Cover:Arm:Pressure Roller |
| Парткод: | C269 4959 |
| Деталь: | Grip:Lock:Duplex Unit |
| Парткод: | C269 4716 |
| Деталь: | Tension Spring:Grip:Lock |
| Парткод: | C269 4717 |
| Деталь: | Stepped Screw - M6 |
| Парткод: | C244 5125 |
| Деталь: | Side Plate:Guide:Paper:Pressure Roller:Front |
| Парткод: | C269 4981 |
| Деталь: | Guide:Paper:Pressure Roller |
| Парткод: | C269 4983 |
| Деталь: | Shaft:Coupling:Guide |
| Парткод: | C269 4982 |
| Деталь: | SCREW:CONTACT POINT:M3 |
| Парткод: | B700 4867 |
| Деталь: | Pressure Roller:Assy |
| Парткод: | C269 3150 |
| Деталь: | Timing Pulley:Gear:Pressure Roller |
| Парткод: | C269 4986 |
| Деталь: | Timing Belt:Pressure Roller |
| Парткод: | C269 1169 |
| Деталь: | Discharge Brush - Exit |
| Парткод: | AA12 0102 |
| Деталь: | Guide Plate:Entrance |
| Парткод: | C269 4952 |
| Деталь: | Shaft:Guide Plate:Moveable:Duplex |
| Парткод: | C269 4733 |
| Деталь: | Gear:Drive:Guide Plate:Moveable |
| Парткод: | C269 4734 |
| Деталь: | Guide Plate:Moveable:Duplex |
| Парткод: | C269 4732 |
| Деталь: | Bracket:Guide Plate:Fix |
| Парткод: | C269 4737 |
| Деталь: | Guide Plate:Fix:Separation:Duplex |
| Парткод: | C269 4739 |
| Деталь: | Sheet:Guide Plate:Separation |
| Парткод: | C269 4740 |
| Деталь: | Pierce Ring:DIA5 |
| Парткод: | C269 4984 |
| Деталь: | Side Plate:Guide:Rear |
| Парткод: | C269 4985 |
| Деталь: | Decal:Paper Jam:Pull Out |
| Парткод: | C269 1313 |
| Деталь: | Spacer:Torque Limiter |
| Парткод: | C269 3159 |
| Деталь: | Torque Limiter:Pressure Roller |
| Парткод: | C269 3158 |
| Деталь: | Pickoff Pawl:Exit:Adhesion |
| Парткод: | C269 3350 |
| Деталь: | Bushing - 8mm |
| Парткод: | 50 530 223 |
| Деталь: | Shaft:Pawl:Moveable:Exit |
| Парткод: | C269 3353 |
| Деталь: | Bracket:Shaft:Pawl:Exit:Peen |
| Парткод: | C269 3355 |
| Деталь: | Spring:Pawl:Moveable:Exit |
| Парткод: | C265 3975 |
| Деталь: | Switch Lever Knob |
| Парткод: | C244 2357 |
| Деталь: | Lever:Pawl:Exit:Moveable:Assy |
| Парткод: | C269 3360 |
| Деталь: | Stay:Lower:Main:Assy |
| Парткод: | C269 3597 |
| Деталь: | Lower Guide Stay - Transfer Roller |
| Парткод: | C244 3596 |
| Деталь: | HARNESS COVER |
| Парткод: | C244 1078 |
| Деталь: | Stay:Upper:Machine or Copier:Welding |
| Парткод: | C244 3570 |
| Деталь: | GROUNDING PLATE |
| Парткод: | C229 5638 |
| Деталь: | Left Guide Plate |
| Парткод: | C244 1861 |
| Деталь: | Master Eject Lock Solenoid |
| Парткод: | C257 3575 |
| Деталь: | LOCK SPRING |
| Парткод: | C256 3574 |
| Деталь: | LOCK LEVER |
| Парткод: | C250 3573 |
| Деталь: | Master Eject Lock Supporting Plate |
| Парткод: | C257 3587 |
| Деталь: | Micro Harness |
| Парткод: | C256 3576 |
| Деталь: | Master Eject Lock Bracket |
| Парткод: | C257 3580 |
| Деталь: | BUSHING |
| Парткод: | B065 5899 |
| Деталь: | Tube:Pawl:Exit |
| Парткод: | C269 3365 |
| Деталь: | Hose Band |
| Парткод: | C244 2530 |
| Деталь: | SCREW:M2.6X3 |
| Парткод: | C259 7050 |
| Деталь: | Joint Shaft |
| Парткод: | C229 3548 |
| Деталь: | JOINT CAM |
| Парткод: | C229 3547 |
| Деталь: | Compression Spring:Joint:Transport |
| Парткод: | C265 3541 |
| Деталь: | Drive Gear - 26Z |
| Парткод: | C229 2102 |
| Деталь: | Bracket:Joint:Transport |
| Парткод: | C244 3549 |
| Деталь: | Compression Spring:3N |
| Парткод: | C265 3585 |
| Деталь: | Master Ejection Unit Harness |
| Парткод: | C257 5228 |
| Деталь: | SCREW |
| Парткод: | AA14 3569 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Positioning Sensor Bracket |
| Парткод: | C229 3582 |
| Деталь: | Bracket:Shaft:Take Off |
| Парткод: | C269 3564 |
| Деталь: | Bushing:8mm:Pressure:Drive |
| Парткод: | C269 3566 |
| Деталь: | Compression Spring:Joint:Pressure:7N |
| Парткод: | C265 3565 |
| Деталь: | Joint:Pressure Sub-unit:Drive:Assy |
| Парткод: | C269 3559 |
| Деталь: | DC Motor:5.0W:MM34 |
| Парткод: | C259 5803 |
| Деталь: | Bracket:DC Motor:Pressure |
| Парткод: | C244 3563 |
| Деталь: | 2nd Gear - 8Z/32Z |
| Парткод: | C229 3545 |
| Деталь: | 3rd Gear - 22Z |
| Парткод: | C229 3542 |
| Деталь: | Timing Belt - S2M160 |
| Парткод: | C229 3551 |
| Деталь: | Gear Pulley - 18Z/60Z |
| Парткод: | C229 3544 |
| Деталь: | Side Plate:Rear:Master Ejection:Peen |
| Парткод: | C265 3566 |
| Деталь: | PUSH SWITCH |
| Парткод: | AW50 0012 |
| Деталь: | Gear - 17Z |
| Парткод: | C229 3557 |
| Деталь: | Torque Limiter - 2500G |
| Парткод: | C238 3556 |
| Деталь: | 2nd Gear - 18Z/49Z |
| Парткод: | C229 3558 |
| Деталь: | Bracket:DC Motor:Transport |
| Парткод: | C244 3543 |
| Деталь: | DC Motor:5.0W:MM34:Pulley |
| Парткод: | C259 5811 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Drive Sub-Unit:Master Ejection:Exp:Assy |
| Парткод: | C262 3530 |
| Деталь: | Harness Master Ejection:Assy |
| Парткод: | C269 5259 |
| Деталь: | Stepper Motor MM50*40 |
| Парткод: | C257 5802 |
| Деталь: | Master Flange Bracket - Rear |
| Парткод: | C257 2188 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Gear - 17Z |
| Парткод: | C219 4071 |
| Деталь: | Rear Shaft |
| Парткод: | C257 1963 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Reverse Roller Bracket |
| Парткод: | C257 2031 |
| Деталь: | HARNESS COVER |
| Парткод: | C257 2254 |
| Деталь: | Timing Belt - B40S2M90 |
| Парткод: | C236 2018 |
| Деталь: | Stepper Motor Bracket |
| Парткод: | C257 2226 |
| Деталь: | Stepper Motor MM42*33 |
| Парткод: | C257 5808 |
| Деталь: | CUTTER UNIT |
| Парткод: | C257 2105 |
| Деталь: | Idle Gear |
| Парткод: | C229 2104 |
| Деталь: | Drive Gear - 26Z |
| Парткод: | C229 2102 |
| Деталь: | WORM GEAR |
| Парткод: | C229 2103 |
| Деталь: | Harness Guide |
| Парткод: | C257 2232 |
| Деталь: | Rear Harness Cover |
| Парткод: | C257 2235 |
| Деталь: | Cutter Unit Bracket |
| Парткод: | C257 2112 |
| Деталь: | Pressure Release Bracket |
| Парткод: | C257 2109 |
| Деталь: | Pressure Release Sensor Bracket |
| Парткод: | C257 2234 |
| Деталь: | Pressure Release Sensor Cover |
| Парткод: | C257 2236 |
| Деталь: | DC Motor:5.0W:MM34 |
| Парткод: | C259 5803 |
| Деталь: | Actuator gear |
| Парткод: | C229 2107 |
| Деталь: | Drive Supporting Plate |
| Парткод: | C259 2028 |
| Деталь: | Timing Belt - B106MXL9.5 |
| Парткод: | C236 2222 |
| Деталь: | Idler Gear - Platen |
| Парткод: | C236 2022 |
| Деталь: | Idler Gear - Tension |
| Парткод: | C236 2024 |
| Деталь: | Gear 22Z |
| Парткод: | C257 2027 |
| Деталь: | Stepper Motor Pulley |
| Парткод: | C259 2021 |
| Деталь: | Drive Unit Bracket |
| Парткод: | C259 1964 |
| Деталь: | Spacer - M4x6x6 |
| Парткод: | A376 1257 |
| Деталь: | Screw:Guide |
| Парткод: | C244 2016 |
| Деталь: | Bushing- 6mm |
| Парткод: | H012 1181 |
| Деталь: | Side Plate:Duplex Unit:Front:Assy |
| Парткод: | C269 4703 |
| Деталь: | Print Pressure Bushing |
| Парткод: | C200 5526 |
| Деталь: | Bracket:Plate:Bearing |
| Парткод: | C269 4812 |
| Деталь: | Cover:Motor |
| Парткод: | C269 4788 |
| Деталь: | Stay:Shaft:Pressure Roller |
| Парткод: | C269 4709 |
| Деталь: | Stopper:Auxiliary:Upper Lower |
| Парткод: | C269 4745 |
| Деталь: | Bracket:Coupling:Drive |
| Парткод: | C269 4720 |
| Деталь: | Tension Spring:Sector |
| Парткод: | C269 4736 |
| Деталь: | Sector:Drive:Guide Plate:Moveable |
| Парткод: | C269 4735 |
| Деталь: | Gear:Coupling:Drive:Duplex Unit |
| Парткод: | C269 4726 |
| Деталь: | Spacer:Coupling:Drive |
| Парткод: | C269 4728 |
| Деталь: | Bracket:Plate:Gear:Coupling |
| Парткод: | C269 4727 |
| Деталь: | Cam:Pressure Roller:Duplex:LT |
| Парткод: | C269 4814 |
| Деталь: | Shaft:Pressure Release |
| Парткод: | C269 4806 |
| Деталь: | Exchange Plate:Pressure Release |
| Парткод: | C269 4807 |
| Деталь: | Plate Nut:Gear:Drive:CAM |
| Парткод: | C269 4810 |
| Деталь: | Gear:Z80:Pressure Release:CAM |
| Парткод: | C269 4808 |
| Деталь: | Plate:Gear:Drive:CAM |
| Парткод: | C269 4809 |
| Деталь: | Gear:Idler:Coupling:Drive |
| Парткод: | C269 4730 |
| Деталь: | Plate:Lock:Pull Out |
| Парткод: | C269 4747 |
| Деталь: | Holder:Plate:Lock:Pull Out |
| Парткод: | C269 4763 |
| Деталь: | Bracket:Lock:Pull Out |
| Парткод: | C269 4731 |
| Деталь: | Arm:Stopper:Turn |
| Парткод: | C269 4744 |
| Деталь: | Drum Lock Spring |
| Парткод: | C229 2406 |
| Деталь: | Drum Lock Screw |
| Парткод: | C244 2413 |
| Деталь: | Side Plate:Duplex Unit:Rear:Assy |
| Парткод: | C269 4706 |
| Деталь: | Decal:Caution Chart:Duplex Unit |
| Парткод: | C269 1317 |
| Деталь: | Grip:Pull Out:Fix |
| Парткод: | C244 3521 |
| Деталь: | Eject Box Lock Lever |
| Парткод: | C244 3524 |
| Деталь: | Tension Spring:9N:Grip:Master Ejection |
| Парткод: | C244 3525 |
| Деталь: | STEPPED SCREW |
| Парткод: | C244 3522 |
| Деталь: | Door:Exhaust:Case:Assy |
| Парткод: | C244 3510 |
| Деталь: | Eject Box Lock Arm |
| Парткод: | C244 3523 |
| Деталь: | Bracket:Grip:Pull Out:Front |
| Парткод: | C244 3526 |
| Деталь: | Eject Box Guide Assy |
| Парткод: | C244 3497 |
| Деталь: | Eject Box Slider |
| Парткод: | C236 3501 |
| Деталь: | Decal - Delivery Table Slider |
| Парткод: | C229 3529 |
| Деталь: | Slide Lock Lever |
| Парткод: | C229 3502 |
| Деталь: | Drum Stay:Sheet:Case:Adhesion |
| Парткод: | C244 3518 |
| Деталь: | Sheet:Exhaust:Guide Plate:Case |
| Парткод: | C244 3499 |
| Деталь: | GROUNDING PLATE |
| Парткод: | C229 3514 |
| Деталь: | Master Stripper Pawl |
| Парткод: | C229 3495 |
| Деталь: | Bracket:Blade:Pressure Plate |
| Парткод: | C244 3496 |
| Деталь: | Master Press Arm |
| Парткод: | C244 3493 |
| Деталь: | Case:Lower Left |
| Парткод: | C244 3517 |
| Деталь: | MAGNET |
| Парткод: | A049 3371 |
| Деталь: | Master Press Arm Shaft |
| Парткод: | C229 3494 |
| Деталь: | Upper Case Grip |
| Парткод: | C229 3513 |
| Деталь: | Bracket:Lock:Pressure Plate |
| Парткод: | C244 3509 |
| Деталь: | Torsion Spring:Lock:Pressure Plate:2.45N |
| Парткод: | C265 3508 |
| Деталь: | Upper Case Release Lever |
| Парткод: | C229 3505 |
| Деталь: | Case:Upper Right |
| Парткод: | C244 3494 |
| Деталь: | Decal - Master Eject Box |
| Парткод: | C239 3528 |
| Деталь: | Case:Master Ejection:Assy |
| Парткод: | C265 3402 |
| Деталь: | Decal-pressure Plate |
| Парткод: | C239 1366 |
| Деталь: | Pressure Plate Bracket |
| Парткод: | C259 3495 |
| Деталь: | Decal-master Ejection |
| Парткод: | C239 1367 |
| Деталь: | Release spring |
| Парткод: | C236 3525 |
| Деталь: | Washer - M5.4x0.1 |
| Парткод: | H041 1583 |
| Деталь: | Decal:Operation Instructions:Master Ejection |
| Парткод: | C265 1325 |
| Деталь: | Inner Cover:Front |
| Парткод: | C269 2364 |
| Деталь: | Lever Screw |
| Парткод: | C244 2453 |
| Деталь: | SPRING WASHER |
| Парткод: | C217 5102 |
| Деталь: | Lever:Switch:Peen |
| Парткод: | C262 2367 |
| Деталь: | Spacer - Cleaning Brush |
| Парткод: | AA13 2080 |
| Деталь: | Switch Lever Knob |
| Парткод: | C244 2357 |
| Деталь: | Lever Switch Bracket |
| Парткод: | C244 2365 |
| Деталь: | Ink Sensor Harness Assy |
| Парткод: | C257 5212 |
| Деталь: | Connector bracket |
| Парткод: | C244 2360 |
| Деталь: | Connector Slider |
| Парткод: | C236 2359 |
| Деталь: | Side Plate:Front:Assy |
| Парткод: | C269 2351 |
| Деталь: | Magnet Catch:44.1n |
| Парткод: | AG07 0504 |
| Деталь: | Magnet Catch Bracket |
| Парткод: | C244 2377 |
| Деталь: | Shoulder Screw - M4 |
| Парткод: | 58 752 088 |
| Деталь: | Ink Sensor PCB |
| Парткод: | C257 5140 |
| Деталь: | Bracket:Magnet Catch:Front |
| Парткод: | C269 2353 |
| Деталь: | Drum Release Grip |
| Парткод: | C244 2362 |
| Деталь: | Drum Stopper Arm |
| Парткод: | C229 2405 |
| Деталь: | Drum Lock Spring |
| Парткод: | C229 2406 |
| Деталь: | Grip Rail |
| Парткод: | C244 2385 |
| Деталь: | Decal - Drum Operation |
| Парткод: | C229 2399 |
| Деталь: | Spring Plate |
| Парткод: | C229 2396 |
| Деталь: | Drum Rail Roller |
| Парткод: | C201 4604 |
| Деталь: | Drum Lock Screw |
| Парткод: | C244 2413 |
| Деталь: | Side Plate:Rear:Large:T |
| Парткод: | C269 2401 |
| Деталь: | Switch arm |
| Парткод: | C236 2608 |
| Деталь: | Drum Rail |
| Парткод: | C257 2313 |
| Деталь: | Spring Plate |
| Парткод: | C229 2394 |
| Деталь: | Stepped Screw - M6 |
| Парткод: | C244 5125 |
| Деталь: | Rear Drum Frame Stand |
| Парткод: | C233 2645 |
| Деталь: | Rear Side Plate |
| Парткод: | C244 2644 |
| Деталь: | Stopper Bracket |
| Парткод: | C229 2391 |
| Деталь: | Lever Collar |
| Парткод: | C236 2370 |
| Деталь: | Front Harness Cover |
| Парткод: | C257 2353 |
| Деталь: | Front Harness Cover |
| Парткод: | C257 2354 |
| Деталь: | Small Front Cover |
| Парткод: | C257 2358 |
| Деталь: | Cover:Harness:No.2 |
| Парткод: | C257 2371 |
| Деталь: | Cover:Harness:No.1 |
| Парткод: | C257 2370 |
| Деталь: | Drum ID Harness Assy |
| Парткод: | C257 5215 |
| Деталь: | Bracket:Connector:Drum |
| Парткод: | C257 2388 |
| Деталь: | Drum ID Connecting Harness Assy |
| Парткод: | C257 5229 |
| Деталь: | Screw M4x8 |
| Парткод: | C244 2452 |
| Деталь: | STOPPER GUIDE |
| Парткод: | C229 2392 |
| Деталь: | Guide:Side Plate:Rear:Drum |
| Парткод: | C269 2402 |
| Деталь: | Bracket:PCB:Ink Sensor |
| Парткод: | C269 2354 |
| Деталь: | Base:Duplex Unit:Assy |
| Парткод: | C269 4701 |
| Деталь: | Bracket:Positioning Sensor |
| Парткод: | C269 4775 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Bracket:Motor:Adjusting Pin |
| Парткод: | C269 4786 |
| Деталь: | DC Motor:7.2W:MM34 |
| Парткод: | C259 5806 |
| Деталь: | Shaft:Connector:Moveable |
| Парткод: | C269 4713 |
| Деталь: | Bracket:Solenoid:Stopper |
| Парткод: | C269 4750 |
| Деталь: | DC Solenoid:24V:7.2W |
| Парткод: | C269 5891 |
| Деталь: | Bracket:Connector:Moveable |
| Парткод: | C269 4712 |
| Деталь: | Tension Spring:Moveable |
| Парткод: | C269 4714 |
| Деталь: | Harness:Duplex Unit:Assy |
| Парткод: | C269 5241 |
| Деталь: | Bracket:Exchange Plate:Peen |
| Парткод: | C269 4797 |
| Деталь: | Gear:2:Exchange Plate |
| Парткод: | C269 4793 |
| Деталь: | Bracket:Photointerruptor |
| Парткод: | C269 4795 |
| Деталь: | Cover:Exchange Plate |
| Парткод: | C269 4796 |
| Деталь: | Bracket:Gear:1:Exchange Plate |
| Парткод: | C269 4792 |
| Деталь: | Rack:Exchange Plate |
| Парткод: | C269 4801 |
| Деталь: | Arm:Exchange Plate |
| Парткод: | C269 4800 |
| Деталь: | BUSHING |
| Парткод: | C229 3148 |
| Деталь: | SHOULDER SCREW |
| Парткод: | C244 4426 |
| Деталь: | Stepped Screw - M4 |
| Парткод: | AA14 3718 |
| Деталь: | Shielding Plate:Sensor |
| Парткод: | C269 4805 |
| Деталь: | Bracket:Motor:Peen |
| Парткод: | C269 4802 |
| Деталь: | Gear:1:Exchange Plate |
| Парткод: | C269 4794 |
| Деталь: | Stepper Motor:Dia42:Plotter:Assy |
| Парткод: | C267 5844 |
| Деталь: | Guard:Large:Connector:Fix:Duplex |
| Парткод: | C269 5689 |
| Деталь: | Guard:Small:Connector:Fix:Duplex |
| Парткод: | C269 5690 |
| Деталь: | Stay:Tray:Feed Paper |
| Парткод: | C269 4901 |
| Деталь: | Guide:Paper:Tray:Feed Paper Again |
| Парткод: | C269 4915 |
| Деталь: | SCREW:CONTACT POINT:M3 |
| Парткод: | B700 4867 |
| Деталь: | Gear:Guide:Positioning:Paper |
| Парткод: | C269 4916 |
| Деталь: | Fan:MM40x28 |
| Парткод: | C269 5830 |
| Деталь: | Duct:Fan:Tray:Feed Paper Again |
| Парткод: | C269 4911 |
| Деталь: | Stepper Motor:MM25:24V |
| Парткод: | C259 5805 |
| Деталь: | Bracket:Stepper Motor:Guide:Paper |
| Парткод: | C269 4917 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Tapping Screw:M3x40 |
| Парткод: | C269 4919 |
| Деталь: | Gear:Drive:Tray:Feed Paper Again |
| Парткод: | C269 4907 |
| Деталь: | Spring:Development Drive Unit |
| Парткод: | B234 3054 |
| Деталь: | Center Roller - Delivery Table |
| Парткод: | C593 4105 |
| Деталь: | Shaft:Drive:Tray:Feed Paper Again |
| Парткод: | C269 4906 |
| Деталь: | Snap Ring - M6 |
| Парткод: | 52 152 621 |
| Деталь: | Transport Belt:Feed Paper Again |
| Парткод: | C269 4905 |
| Деталь: | Shaft:Driven:Tray:Feed Paper Again |
| Парткод: | C269 4908 |
| Деталь: | Spacer:Fan:Tray:Feed Paper Again |
| Парткод: | C269 4914 |
| Деталь: | Arm:Stopper:Shaft:Feed Paper Again |
| Парткод: | C269 4996 |
| Деталь: | Reverse Roller Guide Plate - Lower |
| Парткод: | C257 2030 |
| Деталь: | Guide Plate:Reverse Roller: Lower Middle:Assy |
| Парткод: | C257 2029 |
| Деталь: | Plotter Side Plate - Rear |
| Парткод: | C257 1961 |
| Деталь: | Plotter Side Plate - Front |
| Парткод: | C257 1951 |
| Деталь: | Duct Case |
| Парткод: | C257 2073 |
| Деталь: | Guard:CE-012:102mm |
| Парткод: | C262 2248 |
| Деталь: | Harness:Plotter:Assy |
| Парткод: | C262 5248 |
| Деталь: | Door Catch |
| Парткод: | A659 1272 |
| Деталь: | Guard:CE-012s:23.5mm |
| Парткод: | C239 1182 |
| Деталь: | Base:Plotter:Assy |
| Парткод: | C262 2243 |
| Деталь: | Drum Sensor Sheet |
| Парткод: | C257 2485 |
| Деталь: | Discharge Brush - Lower |
| Парткод: | C257 2078 |
| Деталь: | Discharge Brush |
| Парткод: | C257 2079 |
| Деталь: | Case:Duct:Lower:Assy |
| Парткод: | C244 2068 |
| Деталь: | Right Duct Guide Plate |
| Парткод: | C236 2066 |
| Деталь: | Base Spacer |
| Парткод: | C257 2241 |
| Деталь: | Shoulder Screw - M4 |
| Парткод: | 58 752 088 |
| Деталь: | Cover:Flat Cable:Plotter |
| Парткод: | C262 2245 |
| Деталь: | Flat Cable:Connecting:Plotter:Assy |
| Парткод: | C262 5217 |
| Деталь: | Plate:Flat Cable:Lower |
| Парткод: | C262 2247 |
| Деталь: | Ground Plate:Left:Plotter |
| Парткод: | C259 2248 |
| Деталь: | Hinge:PCB:Upper |
| Парткод: | C269 5618 |
| Деталь: | Bracket:PCB:Assy |
| Парткод: | C269 5620 |
| Деталь: | PCB I/O Control |
| Парткод: | C269 5115 |
| Деталь: | EPROM:I/O Control |
| Парткод: | C269 5124 |
| Деталь: | Harness:Connecting:Plotter:Assy |
| Парткод: | C262 5283 |
| Деталь: | PCB:MPU:Cats-eye:From:Assy |
| Парткод: | C269 5101 |
| Деталь: | Harness:DC Drive:Output:Assy |
| Парткод: | C269 5262 |
| Деталь: | Harness:DC Drive:Input:Assy |
| Парткод: | C269 5201 |
| Деталь: | Bracket:Base:Duplex |
| Парткод: | C269 5613 |
| Деталь: | DC Motor:Air Knife:Assy |
| Парткод: | C265 5826 |
| Деталь: | PCB:Duplex:Prom:Assy |
| Парткод: | C269 5131 |
| Деталь: | Eprom:Duplex |
| Парткод: | C269 5134 |
| Деталь: | Harness:Stm:Output:Assy |
| Парткод: | C269 5203 |
| Деталь: | Stay:PCB |
| Парткод: | C269 5633 |
| Деталь: | Grounding Plate - Upper Rear |
| Парткод: | A267 1089 |
| Деталь: | Shadeing Plate:Duplex |
| Парткод: | C269 5634 |
| Деталь: | Hinge Bracket - Platen Cover |
| Парткод: | C244 1814 |
| Деталь: | Scanner Frame |
| Парткод: | C244 1813 |
| Деталь: | Exposure Glass Cushion |
| Парткод: | 54 421 924 |
| Деталь: | Photointereuptor:EE-SX4235A-P2 |
| Парткод: | AW02 0156 |
| Деталь: | Bracket:Scale:Assy |
| Парткод: | C244 1742 |
| Деталь: | Sheet - Photointerrupter |
| Парткод: | A267 1820 |
| Деталь: | RIGHT INNER COVER |
| Парткод: | C244 1815 |
| Деталь: | Seal - ADF Exposure Glass |
| Парткод: | B351 6523 |
| Деталь: | Drum Stay |
| Парткод: | C257 2821 |
| Деталь: | Sensor Guide |
| Парткод: | H522 1100 |
| Деталь: | Sensor bracket |
| Парткод: | C244 2879 |
| Деталь: | Upper Guide Pin |
| Парткод: | C236 2852 |
| Деталь: | Separation Pad Holder Bracket |
| Парткод: | C236 2881 |
| Деталь: | Drum Rail Roller |
| Парткод: | C201 4604 |
| Деталь: | Separation Pad Holder Bracket |
| Парткод: | C236 2880 |
| Деталь: | Photointerruptor |
| Парткод: | AW02 0141 |
| Деталь: | Separation Harness |
| Парткод: | C257 5238 |
| Деталь: | Separation Change PCB |
| Парткод: | C257 5153 |
| Деталь: | DC Motor:3.7w:DIA25.4 |
| Парткод: | C259 5827 |
| Деталь: | MOTOR BRACKET |
| Парткод: | C244 2875 |
| Деталь: | Gear - 24Z |
| Парткод: | C236 2863 |
| Деталь: | Gear - 32Z/14Z |
| Парткод: | C236 2862 |
| Деталь: | Compression Spring:Separation |
| Парткод: | C265 2858 |
| Деталь: | Lower Pressure Plate |
| Парткод: | C244 2855 |
| Деталь: | SCREW |
| Парткод: | B223 1317 |
| Деталь: | Separation Rack Assy |
| Парткод: | C236 2860 |
| Деталь: | Drum Stay - Paper Feed Assy |
| Парткод: | C244 2832 |
| Деталь: | MOTOR BRACKET |
| Парткод: | C244 2871 |
| Деталь: | Guide Rail Base |
| Парткод: | C244 2840 |
| Деталь: | Separation Pad - A |
| Парткод: | C257 2886 |
| Деталь: | Cover - Separation Sub-unit |
| Парткод: | C244 2880 |
| Деталь: | Worm Wheel - Gear |
| Парткод: | C236 2864 |
| Деталь: | Worm Wheel - Gear |
| Парткод: | C236 2865 |
| Деталь: | Rubber Washer |
| Парткод: | C236 2866 |
| Деталь: | Compression Spring:Torque Limiter: |
| Парткод: | C265 2867 |
| Деталь: | Upper Pressure Plate |
| Парткод: | C244 2848 |
| Деталь: | Slider Bushing |
| Парткод: | C236 2848 |
| Деталь: | Upper Slider |
| Парткод: | C236 2851 |
| Деталь: | Magnetic:Separation Pad |
| Парткод: | C257 2899 |
| Деталь: | Separation Pad - B |
| Парткод: | C257 2895 |
| Деталь: | Screw:Safety |
| Парткод: | AA14 3791 |
| Деталь: | Separation Pad Pressure Plate |
| Парткод: | C257 2845 |
| Деталь: | Xenon Lamp:MM10 |
| Парткод: | C262 1672 |
| Деталь: | Harness Guide - Exposure Lamp |
| Парткод: | A267 1758 |
| Деталь: | Flexible Board:Assy |
| Парткод: | C265 5135 |
| Деталь: | Wire Clamp |
| Парткод: | A193 1766 |
| Деталь: | 1st Scanner Housing |
| Парткод: | C244 1752 |
| Деталь: | Clamp - Rear Wire |
| Парткод: | A193 1769 |
| Деталь: | 1st Mirror Holder |
| Парткод: | A193 1767 |
| Деталь: | 1st Mirror |
| Парткод: | A250 1784 |
| Деталь: | Original Sensor:H2-66 |
| Парткод: | AW01 0126 |
| Деталь: | Harness:Scanner:Assy |
| Парткод: | C262 5220 |
| Деталь: | Lens Holder Assy |
| Парткод: | C259 1673 |
| Деталь: | Sbu Harness Assy |
| Парткод: | C257 5209 |
| Деталь: | Carriage No.1 Assy |
| Парткод: | C244 1655 |
| Деталь: | Lamp Stabilizer |
| Парткод: | A250 5736 |
| Деталь: | Inner Cover:Middle |
| Парткод: | C269 1286 |
| Деталь: | Cap:Inner Cover:Middle |
| Парткод: | C269 1287 |
| Деталь: | Inner Cover:Right |
| Парткод: | C269 1285 |
| Деталь: | Inner Cover:Left |
| Парткод: | C269 1288 |
| Деталь: | Cover:Panel:Lower |
| Парткод: | C265 1265 |
| Деталь: | Operation Panel:Cats-eye:NA:Assy |
| Парткод: | C269 1406 |
| Деталь: | Operation Panel:Cats-eye:EU:Assy |
| Парткод: | C269 1407 |
| Деталь: | Sheet:Counter |
| Парткод: | C262 1357 |
| Деталь: | Scale - Left |
| Парткод: | B229 1749 |
| Деталь: | Exposure Glass |
| Парткод: | A250 1752 |
| Деталь: | Scale - Inner Back |
| Парткод: | B229 1751 |
| Деталь: | Key Counter Plate Nut |
| Парткод: | C238 1339 |
| Деталь: | Key Counter Cover |
| Парткод: | C239 2455 |
| Деталь: | Upper Shield Plate |
| Парткод: | C244 2762 |
| Деталь: | Lower Shield Plate A |
| Парткод: | C244 2764 |
| Деталь: | Lower Shield Plate B |
| Парткод: | C244 2765 |
| Деталь: | Lower Shield Plate |
| Парткод: | C244 2763 |
| Деталь: | Shaft:Scale |
| Парткод: | B390 1759 |
| Деталь: | Decal:Main Switch |
| Парткод: | C262 1373 |
| Деталь: | Decal:Main Switch:EU |
| Парткод: | C262 1374 |
| Деталь: | Knob Screw:M4x10 |
| Парткод: | C259 7052 |
| Деталь: | Bracket:Operation Panel:Right |
| Парткод: | C262 1261 |
| Деталь: | Cover:Main Switch |
| Парткод: | C262 1370 |
| Деталь: | Decal:Caption:Pull Out:Drum:Exp |
| Парткод: | C269 1397 |
| Деталь: | Decal:Caption:Pull Out:Duplex Unit:Exp |
| Парткод: | C269 1398 |
| Деталь: | Decal:Caution:Pickoff Pawl |
| Парткод: | C269 1314 |
| Деталь: | Decal:Grip:Middle:Inner Cover |
| Парткод: | C269 1296 |
| Деталь: | Decal:Paper Jam:Set:Duplex Unit |
| Парткод: | C269 1315 |
| Деталь: | Decal:Caption:LED:Exp |
| Парткод: | C269 1290 |
Коды ошибок
SC100
SC200
SC201
SC202
SC203
SC210
SC211
SC212
SC213
SC300
SC301
SC302
SC304
SC305
SC306
SC307
SC308
SC311
SC312
SC313
SC314
SC315
SC400
SC401
SC500
SC501
SC503
SC505
SC512
SC513
SC514
SC520
SC521
SC550
SC551
SC552
SC553
SC554
SC555
SC556
SC600
SC601
SC602
SC603
SC604
SC605
SC670
SC672
SC720
SC725
SC780
SC781
SC818
SC819
SC820
SC821
SC822
SC823
SC824
SC825
SC826
SC827
SC828
SC829
SC834
SC835
SC836
SC837
SC838
SC850
SC851
SC853
SC854
SC855
SC856
SC857
SC860
SC861
SC862
SC863
SC864
SC865
SC900
SC920
SC990
SC991
SC992
SC998
SC999
Описание
| Error code: | SC100 |
| Description: | CIS Lamp/Scanner Motor Error (C6) |
| Causes: | A problem occurred with the CIS or scanner motor in the flatbed scanner: • After CIS power check • After shading • After CIS failed to return to home position |
| Remedy: | • Check the scanner harness connection • Replace the scanner |
| Error code: | SC200 |
| Description: | Suction Cap HP Sensor Error The maintenance unit slide sensor did not detect the suction cap and wiper blade assembly at home position. |
| Causes: | •X HP sensor connection loose, broken, defective •X Paper or other obstacle blocking movement of the mechanism •X HP sensor defective |
| Error code: | SC201 |
| Description: | Thermal head energy pulse error The CPU detects an abnormal thermal head energy control pulse. |
| Causes: | • Defective ECU |
| Remedy: | 1. Turn the main switch off and on. 2. Check the cables. 3. Replace the polygon motor. |
| Error code: | SC202 |
| Description: | Polygon motor error 1: ON timeout The polygon mirror motor does not reach the targeted operating speed: • Within 10 seconds after turning ON. • Within 10 sec. after changing speed |
| Causes: | • Polygon motor/driver board harness loose or disconnected • Polygon motor/driver board defective • Laser optics unit defective • IPU (EGB) defective |
| Remedy: | • Harness to polygon motor driver board disconnected, defective • Polygon motor defective • Polygon motor driver board defective • Polygon motor defective. |
| Error code: | SC203 |
| Description: | Polygon motor error 2: OFF timeout The polygon mirror motor does leave the READY status within 10 seconds after the polygon motor switches OFF. |
| Causes: | • Polygon motor/driver board harness loose or disconnected • Polygon motor/driver board defective • Laser optics unit defective • IPU (EGB) defective |
| Remedy: | • Harness to polygon motor driver board disconnected, defective • Polygon motor defective • Polygon motor driver board defective • Polygon motor defective. |
| Error code: | SC210 |
| Description: | Laser beam detection error 1: K (Black) The laser synchronization sensor failed to detect the beginning and end of the laser beam flash for the designated color onto the polygon mirror while the mirror is rotating at the prescribed number of revolutions. |
| Causes: | • Cycle the machine off/on • CK Laser unit defective |
| Remedy: | • Laser synchronization detector sensor connection loose, not connected • Laser synchronization detector sensor defective |
| Error code: | SC211 |
| Description: | Laser beam detection error 1: Y (Yellow) The laser synchronization sensor failed to detect the beginning and end of the laser beam flash for the designated color onto the polygon mirror while the mirror is rotating at the prescribed number of revolutions. |
| Causes: | • Cycle the machine off/on • CK laser unit defective |
| Remedy: | • Laser synchronization detector sensor connection loose, not connected • Laser synchronization detector sensor defective |
| Error code: | SC212 |
| Description: | Laser beam detection error 1: M (Magenta) The laser synchronization sensor failed to detect the beginning and end of the laser beam flash for the designated color onto the polygon mirror while the mirror is rotating at the prescribed number of revolutions. |
| Causes: | • Cycle the machine off/on • YM laser unit defective |
| Remedy: | • Laser synchronization detector sensor connection loose, not connected • Laser synchronization detector sensor defective |
| Error code: | SC213 |
| Description: | Laser beam detection error 1: C (Cyan) The laser synchronization sensor failed to detect the beginning and end of the laser beam flash for the designated color onto the polygon mirror while the mirror is rotating at the prescribed number of revolutions. |
| Causes: | • Cycle the machine off/on • YM laser unit defective |
| Remedy: | • Laser synchronization detector sensor connection loose, not connected • Laser synchronization detector sensor defective |
| Error code: | SC300 |
| Description: | AC charge output error 1: K An interrupt checks the status of the power pack every 2 ms. This SC is issued if the BICU detects a short in the AC charge for black, magenta, cyan, or yellow (V = 0, for example) for 500 ms (250 times). |
| Causes: | • Disconnected or defective high voltage harness • Defective high voltage power supply • Defective EGB |
| Remedy: | • High voltage power supply • BICU defective • OPC unit defective 1. Disconnect the high voltage cable from Terminal C of the multiple highvoltage supply board. 2. Attach a voltmeter to the terminal. 3. If there is no output from the terminal, replace the high voltage power supply. -or- If there is output from the terminal, test the resistance between the high voltage cable and the ground. If resistance is nearly "0", check the highvoltage harness for defects and replace it if necessary. 4. Test the conductivity between the OPC unit and the ground. If there is no conductivity between the OPC unit and ground, replace the OPC unit. 5. If there is no charge PWM signal, replace the harness and/or BICU. |
| Error code: | SC301 |
| Description: | AC charge output error 2: M An interrupt checks the status of the power pack every 2 ms. This SC is issued if the BICU detects a short in the AC charge for black, magenta, cyan, or yellow (V = 0, for example) for 500 ms (250 times). |
| Causes: | • Disconnect the high voltage cable from Terminal C of the power pack. • Attach a voltmeter to the terminal. • If there is no output from the terminal, replace the power pack. -or- • If there is output from the terminal, test the resistance between the high voltage cable and the ground. • If resistance is nearly "0", check the high-voltage harness for defects and replace it if necessary. • Test the conductivity between the PCU and the ground. If there is no conductivity between the PCU and ground, replace the PCU. • If there is no charge PWM signal, replace the harness and/or BCU. |
| Remedy: | • High voltage power supply • BICU defective • OPC unit defective 1. Disconnect the high voltage cable from Terminal C of the multiple highvoltage supply board. 2. Attach a voltmeter to the terminal. 3. If there is no output from the terminal, replace the high voltage power supply. -or- If there is output from the terminal, test the resistance between the high voltage cable and the ground. If resistance is nearly "0", check the highvoltage harness for defects and replace it if necessary. 4. Test the conductivity between the OPC unit and the ground. If there is no conductivity between the OPC unit and ground, replace the OPC unit. 5. If there is no charge PWM signal, replace the harness and/or BICU. |
| Error code: | SC302 |
| Description: | AC charge output error 3: C An interrupt checks the status of the power pack every 2 ms. This SC is issued if the BICU detects a short in the AC charge for black, magenta, cyan, or yellow (V = 0, for example) for 500 ms (250 times). |
| Causes: | This SC is issued if the BICU detects a short in the power pack 10 times consecutively. Open circuit (+) / Short circuit (-) |
| Remedy: | • High voltage power supply • BICU defective • OPC unit defective 1. Disconnect the high voltage cable from Terminal C of the multiple highvoltage supply board. 2. Attach a voltmeter to the terminal. 3. If there is no output from the terminal, replace the high voltage power supply. -or- If there is output from the terminal, test the resistance between the high voltage cable and the ground. If resistance is nearly "0", check the highvoltage harness for defects and replace it if necessary. 4. Test the conductivity between the OPC unit and the ground. If there is no conductivity between the OPC unit and ground, replace the OPC unit. 5. If there is no charge PWM signal, replace the harness and/or BICU. |
| Error code: | SC304 |
| Description: | Charge Corona Error: Charge Leak (K PCU) A abnormal detection signal (H) was detected for longer than 250 ms. |
| Causes: | • Turn the machine power off/on • CGB power pack harness connectors loose, broken, defective • Corona wire caps loose, missing • CGB power pack defective • Charge corona unit connectors loose, broken, defective |
| Error code: | SC305 |
| Description: | Charge corona wire cleaner error The wire cleaning pad did not return to its home position within 5 sec. after wire cleaning. |
| Causes: | • Wire cleaner motor harness loose, broken, defective • Wire cleaner motor defective • Charge corona wire defective |
| Remedy: | • This SC is not issued if SP2804 is set to zero (no cleaning). • If immediate repair is not possible, set SP2804 to zero to switch off the charge corona cleaner function. |
| Error code: | SC306 |
| Description: | Charge Corona Wire Cleaner Error 2 The cleaning pad of the charge corona wire cleaner mechanism failed to return to its home position. |
| Causes: | Connectors between motor and IOB loose, broken, defective • Charge wire dirty, defective, broken • Wire cleaning pad defective • Motor or motor board in motor unit defective |
| Error code: | SC307 |
| Description: | Hot Ink The temperature of ink is more than 61 ° C |
| Causes: | • Thermistor short |
| Error code: | SC308 |
| Description: | Charge Corona Error: Wire Cleaner Error (K PCU) The charge corona wire cleaner motor remained locked after the motor was switched on, or failed to switch off within the prescribed time after cleaning started. |
| Causes: | • Turn the machine power off/on • Motor overloaded due to a physical obstruction • Motor defective |
| Error code: | SC311 |
| Description: | Pressure cam shift motor lock (HP sensor error) The pressure cam HP sensor does not turn off for more 3 seconds when the pressure cam is at HP. The pressure cam HP sensor does not turn on for more than 3 seconds when the pressure cam is not at HP. |
| Causes: | • Defective sensor • Defective motor |
| Error code: | SC312 |
| Description: | Charge, development error 1: K 500 ms after the black, magenta, cyan, and yellow drums start to rotate, the machine starts to monitor the AC current feedback at 8 ms intervals. This is SC is issued if the feedback for the charge unit of any color drops below 0.5V for 400 ms (50 consecutive readings). |
| Causes: | • Pre-charge unit set incorrectly. • Pre-charge unit contact is broken or defective. |
| Remedy: | • Make sure that the settings of SP2202 are at the defaults. • Defective charge roller • Defective power pack |
| Error code: | SC313 |
| Description: | Charge, development error 2: M 500 ms after the black, magenta, cyan, and yellow drums start to rotate, the machine starts to monitor the AC current feedback at 8 ms intervals. This is SC is issued if the feedback for the charge unit of any color drops below 0.5V for 400 ms (50 consecutive readings). |
| Causes: | • Make sure that the settings of SP2202 are at the defaults. • Check harness connections between charge roller and transfer power pack. • Defective charge roller • Defective power pack |
| Remedy: | • Make sure that the settings of SP2202 are at the defaults. • Defective charge roller • Defective power pack |
| Error code: | SC314 |
| Description: | Charge, development error 3: C 500 ms after the black, magenta, cyan, and yellow drums start to rotate, the machine starts to monitor the AC current feedback at 8 ms intervals. This is SC is issued if the feedback for the charge unit of any color drops below 0.5V for 400 ms (50 consecutive readings). |
| Causes: | • Make sure that the settings of SP2202 are at the defaults. • Check harness connections between charge roller and transfer power pack. • Defective charge roller • Defective power pack |
| Remedy: | • Make sure that the settings of SP2202 are at the defaults. • Defective charge roller • Defective power pack |
| Error code: | SC315 |
| Description: | Charge, development error 4: Y 500 ms after the black, magenta, cyan, and yellow drums start to rotate, the machine starts to monitor the AC current feedback at 8 ms intervals. This is SC is issued if the feedback for the charge unit of any color drops below 0.5V for 400 ms (50 consecutive readings). |
| Causes: | • Make sure that the settings of SP2202 are at the defaults. • Check harness connections between charge roller and transfer power pack. • Defective charge roller • Defective power pack |
| Remedy: | • Make sure that the settings of SP2202 are at the defaults. • Defective charge roller • Defective power pack |
| Error code: | SC400 |
| Description: | ID sensor error 1: Calibration Before adjustment Vsg_reg<0.5 but Vsg_reg could not be adjusted to the target Vsg_reg = 4.0±0.2V during process control. |
| Causes: | • TM sensors are dirty. • A solid print out due to an electrostatic charging error • The TM sensor is defective. |
| Remedy: | • ID sensor harness disconnected, loose, defective • ID sensor dirty • ID sensor defective • ITB unit drawer connector dirty |
| Error code: | SC401 |
| Description: | ID sensor error 2: Vsg When the ID sensor was calibrated, Vsg (reflectivity of the bare drum surface) was detected less than 2.5V after two attempts. -or- After calibration, Vsg was detected as 5.0V at PWM adjustment and PWM=0. |
| Causes: | • Dirty ID sensor • ID sensor harness connection loose, broken, defective • TD power pack defective • IOB defective |
| Error code: | SC500 |
| Description: | Transport/Fusing Motor Error The LOCK signal error is detected when the EGB monitors the transport/fusing motor state. (This monitoring is done immediately after power-on, when the motor starts rotating, and immediately after the motor stops.) |
| Causes: | • Disconnected or defective motor harness. • Motor slips due to excessive load |
| Remedy: | 1. Check the harness from the transport/fusing motor. Replace it if necessary. |
| Error code: | SC501 |
| Description: | Tray 1 (tandem tray) feed error (Japan Only) • The tray 1 lift sensor does not switch ON 10 s after the tray lift motor switches ON and starts lifting the bottom plate. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec. • The lower limit sensor of the tandem tray does not detect the lower limit within 10 sec. |
| Causes: | • Tray lift motor harness disconnected, loose, defective • Paper or other obstacle trapped between tray and motor • Tray lift sensor disconnected, damaged • Lower limit sensor disconnected, damaged • Pick-up solenoid disconnected, blocked by an obstacle |
| Remedy: | • Tray lift motor harness disconnected, loose, defective • Paper or other obstacle trapped between tray and motor • Tray lift sensor disconnected, damaged • Lower limit sensor disconnected, damaged • Pick-up solenoid disconnected, blocked by an obstacle |
| Error code: | SC503 |
| Description: | Tray 1 feed error • The lift sensor is not activated within 10 seconds after the tray lift motor starts lifting the bottom plate. • When the tray lowers, the tray lift sensor does not go off within 1.5 sec. |
| Causes: | • Tray lift motor defective or disconnected • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle |
| Remedy: | • Tray lift motor defective or disconnected • Paper or other obstacle trapped between tray and motor • Pick-up solenoid disconnected or blocked by an obstacle |
| Error code: | SC505 |
| Description: | Tandem tray rear fence motor error • The return sensor does not switch ON within 10 sec. after the rear fence motor switches ON. • The HP sensor does not switch ON 10 sec. after the rear fence motor switches ON. • The HP sensor and return sensor switch ON at the same time. |
| Causes: | • Rear fence motor defective or poor connection • Paper or other obstacle interfering with operation of the sensors • Paper or other obstacle trapped between tray and motor • Motor mechanical overload due to obstruction • Return sensor or HP sensor defective or dirty |
| Remedy: | • Rear fence motor defective or poor connection • Paper or other obstacle interfering with operation of the sensors • Paper or other obstacle trapped between tray and motor • Motor mechanical overload due to obstruction • Return sensor or HP sensor defective or dirty |
| Error code: | SC512 |
| Description: | Registration Press Motor lock The registration roller release sensor does not change the status for more than 3 seconds after the Registration press motor on signal is generated. |
| Causes: | • Defective motor • Defective registration roller release sensor |
| Error code: | SC513 |
| Description: | Registration Gate Position Error |
| Causes: | The registration gate could not be detected on or off within the prescribed time. Specifically: • The registration gate HP sensor did not switch off within 500 ms after the gate retract motor switched on. • After the registration HP sensor switched off, the HP sensor did not switch on within 500 ms. |
| Remedy: | • Gate retract motor harness disconnected or broken • Gate HP sensor harness disconnected or broken • Physical obstacle (paper, etc.) is blocking operation of the motor • Gate HP sensor actuator bent, broken, or out of position • Gate HP sensor defective • Gate retract motor or motor drive board defective |
| Error code: | SC514 |
| Description: | Registration Shift Position Error |
| Causes: | The HP sensor did not go on or off within the prescribed time. Specifically: • During normal homing operation, before the unit shift motor starting rotating clockwise, the unit was detected at the HP (on). Or, after the unit shift motor had rotated clockwise for 20 pulses, the unit could not be detected at the HP (on). • During homing operation with the unit out of HP, The unit could not be detected off or on within 1068 ms after the unit shift motor started rotating count-clockwise and the cam shaft had rotated twice. |
| Remedy: | • Shift motor harness disconnected or broken • Physical obstruction is blocking operation of the motor • HP sensor harness disconnected or broken • Sensor actuator bent, broken, or out of position • Motor or motor drive board defective |
| Error code: | SC520 |
| Description: | Fusing/Exit Motor error. The Fusing/Exit Motor LOCK signal is not detected for a duration of one second after the motor START signal is sent. |
| Causes: | • Torque overload • Defective main motor • Disconnected or defective motor harness |
| Remedy: | • Fusing/Exit Motor connecter is not connected correctly. • Fusing/Exit Motor torque is too high or too low. • Fusing/Exit Motor is defective. |
| Error code: | SC521 |
| Description: | Exit Motor Error |
| Causes: | The exit motor failed to start within the prescribed time or failed during normal operation. |
| Remedy: | • Exit motor harness disconnected or defective • Exit motor shaft locked, blocked by obstruction • Exit motor defective |
| Error code: | SC550 |
| Description: | Heating roller thermistor 2 error 4: Hardware - High Temperature. The thermistor detected a temperature over 260°C. |
| Causes: | • Do SP5810 to cancel the SC fusing code. • TRIAC short, AC drive board defective • VBCU defective |
| Remedy: | • TRIAC short • IOB defective • BICU defective • Fusing temperature control is erratic Do SP5810 to cancel the SC fusing code. |
| Error code: | SC551 |
| Description: | Pressure roller thermistor error 1. The temperature measured by the pressure roller thermistor does not reach 0°C for 200 sec. |
| Causes: | In the condition of relay ON, the end thermistor on the fusing detects less than 0 degrees Celsius for more than 5 seconds. |
| Remedy: | • Loose connection of the pressure roller thermistor • Defective pressure roller thermistor • Defective BICU Do SP5810 to cancel the SC fusing code. |
| Error code: | SC552 |
| Description: | Pressure roller thermistor error 2. After the main switch is turned ON or the cover is closed, the heating roller temperature does not reach the ready temperature within 2 sec. after the heater switches ON. -or- If the roller was below 45°C, the heating roller did not reach the ready temperature 2 sec. after reaching 45°C. Note: Thermistor 2 stops monitoring the temperature once Thermistor 1 detects ready temperature. |
| Causes: | • Defective or deformed non-contact thermistor • Incorrect power supply input at the main power socket |
| Remedy: | • Pressure roller thermistor harness loose, disconnected, defective • Pressure roller thermistor defective |
| Error code: | SC553 |
| Description: | Pressure roller thermistor error 3: Software -High temperature. The thermistor detected a temperature over 220°C. |
| Causes: | • Defective main board • Defective PSU |
| Remedy: | • TRIAC short • IOB defective • BICU defective • Fusing temperature control is erratic Do SP5810 to cancel the SC fusing code. |
| Error code: | SC554 |
| Description: | Pressure roller thermistor error 4: Hardware - High temperature. The thermistor detected a temperature over 230°C. |
| Causes: | • Defective main board • Defective PSU • Defective fusing unit |
| Remedy: | • TRIAC short • IOB defective • BICU defective • Fusing temperature control is erratic Do SP5810 to cancel the SC fusing code. |
| Error code: | SC555 |
| Description: | Pressure roller thermistor error 5: Lamp remains ON. After hot roller reaches warmup temperature, the pressure roller fusing lamp remains for 6 sec. while the hot roller is not rotating. |
| Causes: | The fusing lamp reached the warm-up temperature and then attained fusing temperature (full power), but remained on after paper passed through the fusing unit (hot roller was not rotating). |
| Remedy: | • Thermistor damaged, or out of position • Fusing lamp disconnected, broken Do SP5810 to cancel the SC fusing code. |
| Error code: | SC556 |
| Description: | Heating roller thermistor 2 error 5: Lamp remains ON. After hot roller reaches warmup temperature, the pressure roller fusing lamp remains for 6 sec. while the hot roller is not rotating. |
| Causes: | More than 1 degree Celsius temperature difference (between Center – End thermistor) is detected for 1.5 seconds 5 times in a row. |
| Remedy: | • Thermistor damaged, or out of position • Fusing lamp disconnected, broken |
| Error code: | SC600 |
| Description: | NVRAM (ECU) version differ There is no version history in the program of NVRAM |
| Causes: | • Incorrect firmware installed. |
| Error code: | SC601 |
| Description: | Communication Error Between BCU and MCU One or more of the following occurred: • The BCU cannot communicate with the MCU within 100 ms after power on after 3 tries. • A BREAK signal was detected after connection between the BCU and MCU. • After a communication error, three tries to communicate with the MCU failed. |
| Causes: | • Poor connection between BCU and MCU • BCU defective • MCU defective |
| Remedy: | 1. Check that connectors CN355 and CN407 are properly connected on the sub control board and scanner IPU board. 2. Replace the sub and/or main scanner IPU board. 3. Replace the main control board. |
| Error code: | SC602 |
| Description: | Ri10 error Ri10 cannot be started, read, written. |
| Causes: | • Defective ECU |
| Error code: | SC603 |
| Description: | MSU error The machine detects a failure in the memory control ASIC. The memory control ASIC cannot access to RAM normally. |
| Causes: | • Defective ECU board • Replace the RAM on the ECU board • Defective connection of cable on ECU board |
| Error code: | SC604 |
| Description: | Make-up RAM error The RAM for the make-up pattern data cannot be reset. |
| Causes: | • Defective ECU |
| Remedy: | 1. Make sure the IDU board is properly connected to the sub scanner IPU board. 2. Replace the IDU board. 3. Replace the scanner sub and/or main IPU board. |
| Error code: | SC605 |
| Description: | Shut off solenoid lock Does not shut off for more than 6 seconds after the shut off solenoid on signal is generated. |
| Causes: | • Defective main switch |
| Error code: | SC670 |
| Description: | Engine startup error. • Engine does not respond within 30 s after power ON. • Engine down detected suddenly during power ON and warmup. |
| Causes: | The engine failed to communicate with the firmware. Firmware update failure. |
| Remedy: | • BICU installation incorrect • BICU defective • Sudden communication reset occurred between the BICU and the controller. |
| Error code: | SC672 |
| Description: | GW controller startup error. • After power ON, the line between the GW controller and the operation panel did not open for normal operation. • After normal startup, communication with the GW controller stopped. |
| Causes: | • Controller stalled • Board installed incorrectly • Controller board defective • Operation panel connector loose, broken, or defective • Controller late |
| Remedy: | • GW Controller stalled • GW Controller installed incorrectly • GW Controller board defective • Operation panel harness disconnected or defective |
| Error code: | SC720 |
| Description: | Finisher lower transport motor error. No encoder pulse signal is detected for the transport motor within the prescribed time. The 1st failure issues an original jam message, and the 2nd failure issues this SC code. |
| Causes: | • Harness short-circuit -80 only • Overload • Motor defective • Solenoid defective -03, -80 only • Connector disconnected • Encoder defective -10, -25, -34 -81 only • Home position sensor defective |
| Remedy: | • Lower transport motor disconnected, defective • Finisher connection to transport motor loose, defective • Lower transport motor defective • Finisher main board defective |
| Error code: | SC725 |
| Description: | Finisher exit guide plate motor error. After moving away from the guide plate position sensor, the exit guide is not detected at the home position within the prescribed time. The 1st detection failure issues a jam error, and the 2nd failure issues this SC code. |
| Causes: | The motor that opens and closes the exit guide at the shift tray exit is not operating correctly. |
| Remedy: | • Guide plate motor disconnected, defective • Guide plate motor overloaded due to obstruction • Guide plate position sensor disconnected, defective |
| Error code: | SC780 |
| Description: | Z-Fold feed motor error Japan Only. The feed motor does not attain the prescribed speed within the specified time. |
| Causes: | • Motor harness loose, broken, defective • Motor blocked by an obstruction • Motor defective |
| Remedy: | • Feed motor disconnected, defective • Feed motor overloaded due to obstruction • Feed motor lock |
| Error code: | SC781 |
| Description: | Z-Fold lower stopper motor Japan Only. The lower stopper motor does not attain the prescribed speed within the specified time. |
| Causes: | • Lower stopper motor disconnected, defective • Lower stopper motor overloaded due to obstruction • Lower stopper HP sensor disconnected, defective |
| Remedy: | • Lower stopper motor disconnected, defective • Lower stopper motor overloaded due to obstruction • Lower stopper HP sensor disconnected, defective |
| Error code: | SC818 |
| Description: | Watchdog error. While the system program is running, a bus hold or interrupt program goes into an endless loop, preventing any other programs from executing. |
| Causes: | • System program defective; switch off/on, or change the controller firmware if the problem cannot be solved • Controller board defective • Replace the peripheral device |
| Remedy: | • System program defective; switch OFF/ON, or change the controller firmware if the problem cannot be solved • Controller board defective • Controller option malfunction |
| Error code: | SC819 |
| Description: | Fatal kernel error. Due to a control error, a RAM overflow occurred during system processing. One of the following messages was dis |
| Causes: | • Controller board defective |
| Remedy: | • System program defective • Controller board defective • Optional board defective • Replace controller firmware 0x696e init died 0x766d vm_pageout: Virtual Memory is full 4361 Cache Error NOTE: For more details about this SC code error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel. |
| Error code: | SC820 |
| Description: | Controller Error |
| Causes: | Unexpected error. |
| Remedy: | Cycle the machine off/on. |
| Error code: | SC821 |
| Description: | Self-diagnostic error 1: ASIC The ASIC provides the central point for the control of bus arbitration for CPU access, for option bus and SDRAM access, for SDRAM refresh, and for management of the internal bus gate. |
| Causes: | • ASIC (controller board defective) |
| Error code: | SC822 |
| Description: | Self-diagnostic error 2: HDD |
| Error code: | SC823 |
| Description: | USB/ Network Device Error An interface error in the USB connection or NIB connection occurs. |
| Causes: | • Controller board detective |
| Remedy: | 1. Replace the controller board. |
| Error code: | SC824 |
| Description: | Self-diagnostic error 4: NVRAM NVRAM device does not exist, NVRAM device is damaged, NVRAM socket damaged |
| Causes: | • Controller board detective |
| Remedy: | • NVRAM defective • Controller board defective • NVRAM backup battery exhausted • NVRAM socket damaged |
| Error code: | SC825 |
| Description: | Self-diagnostic Error: NVRAM (Option) The resident non-volatile RAM returned an error during the self-diagnostic test. |
| Causes: | • NVRAM of ACU board damaged or abnormal • NVRAM socket damaged |
| Error code: | SC826 |
| Description: | Self-diagnostic Error: NVRAM (RTC Option) If this NVRAM is installed, the difference between the 1 second measurement of RTC and 1 second CPU timer exceeds the allowable limit. |
| Causes: | • RTC device error |
| Error code: | SC827 |
| Description: | On-Board Memory Check Error An on-board memory check error at power-on occurs. |
| Causes: | • Controller board detective |
| Remedy: | 1. Replace the controller board. |
| Error code: | SC828 |
| Description: | Self-diagnostic error 7: ROM • Measuring the CRC for the boot monitor and operating system program results in an error. • A check of the CRC value for ROMFS of the entire ROM area results in an error. |
| Causes: | A firmware type error or checksum error occurred. |
| Remedy: | • Software defective • Controller board defective • ROM defective NOTE: For more details about this SC 833, SC834 error, execute SP5990 to print an SMC report so you can read the error code. The error code is not displayed on the operation panel. The additional error codes (0F30, 0F31, etc. are listed in the SMC report. |
| Error code: | SC829 |
| Description: | Self-diagnostic error 5: Optional RAM Verify error for optional RAM. |
| Causes: | • Make sure that the resident RAM is installed in the correct slot. • Make sure the optional RAM is installed in the correct slot (Slot 0) |
| Remedy: | 1. Turn the main switch off and on. 2. Replace the RAM DIMM. 3. Replace the controller board. |
| Error code: | SC834 |
| Description: | Self-diagnostic error 9: Optional Memory RAM DIMM 5101 The write/verify check for the optional RAM chip on the engine mother board gave an error. |
| Causes: | • Controller defective |
| Remedy: | • Controller defective • Mother board defective |
| Error code: | SC835 |
| Description: | Self-Diagnostic Error: Centro device Loopback test error. |
| Causes: | • Loopback connector not detected • IEEE1284 connector defective • ACU board defective |
| Remedy: | 1. Turn the main switch off and on. 2. Check the connection between the Centronics connector and loop-back connector. 3. Reconnect the loop-back connector. 4. Replace the controller. |
| Error code: | SC836 |
| Description: | Self-diagnostic Error: Resident Font ROM The resident font ROM returned an error during the self-diagnostic test. |
| Causes: | • Defective ACU board |
| Remedy: | 1. Turn the main switch off and on. 2. Replace the standard ROM-DIMM. |
| Error code: | SC837 |
| Description: | Self-diagnostic Error: Optional Font ROM The optional font ROM returned an error during the self-diagnostic test. |
| Causes: | • Defective ACU board |
| Remedy: | 1. Turn the main switch off and on. 2. Replace the optional ROM-DIMM. |
| Error code: | SC838 |
| Description: | Self-diagnostic error: Clock generator CTL [2701] A verify error occurred when setting data was read from the clock generator via the I2C bus |
| Causes: | •X Defective clock generator •X Defective I2C bus •X Defective I2C port on the CPU |
| Remedy: | •X Replace the controller board. |
| Error code: | SC850 |
| Description: | Net I/F error. • Duplicate IP addresses. • Illegal IP address. • Driver unstable and cannot be used on the network. |
| Causes: | • IP address setting incorrect • Ethernet board defective • Controller board defective |
| Remedy: | • IP address setting incorrect • Ethernet board defective • Controller board defective |
| Error code: | SC851 |
| Description: | IEEE 1394 I/F error. Driver setting incorrect and cannot be used by the 1394 I/F. |
| Causes: | Driver setting incorrect and cannot be used by the 1394 I/F. |
| Remedy: | • NIB (PHY), LINK module defective; change the Interface Board • Controller board defective |
| Error code: | SC853 |
| Description: | Wireless LAN Error 1. During machine start-up, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth). |
| Causes: | During machine start-up, the machine can access the board that holds the wireless LAN (Bluetooth), but not access the wireless LAN card. |
| Remedy: | • Wireless LAN card missing (was removed) |
| Error code: | SC854 |
| Description: | Wireless LAN Error 2. During machine operation, the machine can get access to the board that holds the wireless LAN, but not to the wireless LAN card (802.11b or Bluetooth). |
| Causes: | The board that holds the wireless LAN card (Bluetooth) could be accessed, but the wireless LAN card could not be accessed while the machine was operating. |
| Remedy: | • Wireless LAN card missing (was removed) |
| Error code: | SC855 |
| Description: | Wireless LAN error 3. An error was detected on the wireless LAN card (802.11b or Bluetooth). |
| Causes: | An error was detected for the wireless LAN card (802.11b or Bluetooth). |
| Remedy: | • Wireless LAN card defective • Wireless LAN card connection incorrect |
| Error code: | SC856 |
| Description: | Wireless LAN error 4. An error was detected on the wireless LAN card (802.11b or Bluetooth). |
| Causes: | An error was detected for the wireless LAN board (Bluetooth). |
| Remedy: | • Wireless LAN card defective • PCI connector (to the mother board) loose |
| Error code: | SC857 |
| Description: | USB I/F Error. The USB driver is not stable and caused an error. |
| Causes: | The USB driver is unstable and generated an error. |
| Remedy: | • Bad USB card connection • Replace the controller board |
| Error code: | SC860 |
| Description: | HDD startup error at main power ON. • HDD is connected but a driver error is detected. • The driver does not respond with the status of the HDD within 30 s. |
| Causes: | HDD is connected but a driver error is detected, or the driver did not respond with the status of the HDD within 30 s. |
| Remedy: | • HDD is not formatted • Label name input during formatting is corrupted; format the hard disk again • HDD is defective |
| Error code: | SC861 |
| Description: | HDD re-try failure. At power ON with the HDD detected, power supply to the HDD is interrupted, after the HDD is awakened from the sleep mode, the HDD is not ready within 30 s. |
| Causes: | At power on with the HDD detected, power supply to the HDD is interrupted, after the HDD is awakened from the sleep mode, the HDD is not ready within 30 s. |
| Remedy: | • Harness between HDD and board disconnected, defective • HDD power connector disconnected • HDD defective • Controller board defective |
| Error code: | SC862 |
| Description: | Bad sector overflow CTL There more 100 bad sectors in image storage area of the HDD. |
| Causes: | •X Format HDD with SP4911-2 •X HDD defective |
| Error code: | SC863 |
| Description: | HDD data read failure. The data written to the HDD cannot be read normally, due to bad sectors generated during operation. |
| Causes: | The data written to the HDD cannot be read normally, due to bad sectors generated during operation. |
| Remedy: | • HDD defective Note: If the bad sectors are generated at the image partition, the bad sector information is written to NVRAM, and the next time the HDD is accessed, these bad sectors will not be accessed for read/write operation. |
| Error code: | SC864 |
| Description: | HDD data CRC error. During HDD operation, the HDD cannot respond to an CRC error query. Data transfer did not execute normally while data was being written to the HDD. |
| Causes: | During HDD operation, the HDD cannot respond to an CRC error query. Data transfer did not execute normally while data was being written to the HDD. |
| Remedy: | • HDD defective |
| Error code: | SC865 |
| Description: | HDD access error. HDD responded to an error during operation for a condition other than those for SC863, 864. |
| Causes: | HDD responded to an error during operation for a condition other than those for SC863, 864. |
| Remedy: | • HDD defective. |
| Error code: | SC900 |
| Description: | Electrical total counter error. The total counter contains something that is not a number. |
| Causes: | The total counter contains data that is not a number. |
| Remedy: | • NVRAM incorrect type • NVRAM defective • NVRAM data scrambled • Unexpected error from external source |
| Error code: | SC920 |
| Description: | Printer error 1. An internal application error was detected and operation cannot continue. |
| Causes: | • The software’s bug • Unexpected hardware configuration such as insufficient memory |
| Remedy: | • Software defective; turn the machine OFF/ON, or change the controller firmware • Insufficient memory |
| Error code: | SC990 |
| Description: | Software error 2 The software performs an unexpected function and the program cannot continue. |
| Causes: | An unexpected operation was encountered by the software. |
| Remedy: | • Software defective, re-boot 1) Execute SP7403 or print an SMC Report (SP5990) to read the history of the 10 most recent logged errors. 2) If you press the zero key on the operation panel with the SP selection menu displayed, you will see detailed information about the recently logged SC990 or SC991, including the software file name, line number, and so on. 1) is the recommended method, because another SC could write over the information for the previous SC. |
| Error code: | SC991 |
| Description: | Software error 3 The software performs an unexpected function and the program cannot continue. However, unlike SC990, recovery processing allows the program to continue. |
| Causes: | The software peformed an unexpected function and the program cannot continue. Recovery processing allows the program to continue. |
| Remedy: | • Software defective, re-boot 1) Execute SP7403 or print an SMC Report (SP5990) to read the history of the 10 most recent logged errors. 2) If you press the zero key on the operation panel with the SP selection menu displayed, you will see detailed information about the recently logged SC990 or SC991, including the software file name, line number, and so on. 1) is the recommended method, because another SC could write over the information for the previous SC. |
| Error code: | SC992 |
| Description: | Software error 4: Undefined An error not controlled by the system occurred (the error does not come under any other SC code). |
| Causes: | An error not controlled by the system occurred (the error does not come under any other SC code). |
| Remedy: | • Software defective • Turn the machine power OFF and ON. The machine cannot be used until this error is cleared. |
| Error code: | SC998 |
| Description: | Application cannot start Register processing does not operate for an application within 60 s after the machine power is turned ON. No applications not start correctly, and all end abnormally. |
| Causes: | Register processing did not execute for an application within 60 sec. after the machine was switched on. No applications start correctly, and all end abnormally. |
| Remedy: | • Software bug • A RAM or DIMM option necessary for the application is not installed or not installed correctly. |
| Error code: | SC999 |
| Description: | Program Download Error The program download from the SD card does not execute normally. This SC is not logged. |
| Causes: | • Card installed incorrectly • BCU defective • SD card defective • Controller board defective • Power down during program downloading • Wrong type of card inserted (see Section 5 “Service Tables” for downloading procedures) |
