
Ricoh SP3600SF
Рейтинг
Актуальный
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A4
Число страниц в месяц
50000
Скорость печати
A4
30
Цветность печати
черно-белая
Общие характеристики |
|
---|---|
Число страниц в месяц |
50 000 |
Область применения |
средний офис |
Тип |
лазерный/светодиодный |
Цветность печати |
|
Технология печати |
лазерная |
Печать фотографий |
|
Телефон |
|
Макс. формат |
A4 |
Размещение |
настольный |
Копир |
![]() |
Сканер |
![]() |
Факс |
![]() |
Тип устройства |
МФУ |
Принтер |
|
Система непрерывной подачи чернил |
|
Прямая печать |
|
Печать без полей |
|
Пигментные чернила |
|
Двусторонняя печать |
![]() |
Время разогрева |
14 |
Макс, разрешение для ч/б печати |
|
По Y | 1 200 |
По X | 1 200 |
Скорость ч/б печати |
|
A4 | 30 |
Время выхода первого отпечатка |
|
Ч/б | 6,5 |
Копир |
|
Шаг масштабирования |
0,01 |
Макс, количество копий за цикл |
99 |
Значение масштаба |
|
Минимальное | 0,25 |
Максимальное | 4 |
Макс, разрешение (ч/б) |
|
По Y | 600 |
По X | 600 |
Сканер |
|
Тип сканера |
планшетный/протяжный |
Тип датчика сканера |
контактный (CIS) |
Оттенки серого |
256 |
Макс. формат оригинала |
A4 |
Стандарт TWAIN |
![]() |
Отправка изображения по e-mail |
![]() |
Слайд-адаптер |
|
Стандарт WIA |
|
Макс, размер сканирования |
|
По X | 216 |
По Y | 297 |
Разрешение сканера |
|
По Х | 600 |
Скорость сканирования |
|
Ч/б | 20 |
Цветн, | 6 |
Расходные материалы |
|
Ресурс фотобарабана |
20 000 |
Ресурс ч/б картриджа/тонера |
3 000 |
Количество картриджей |
1 |
Печать на: |
|
CD/DVD |
|
Рулоне |
|
Фотобумаге |
|
Конвертах |
![]() |
Матовой бумаге |
![]() |
Глянцевой бумаге |
![]() |
Этикетках |
![]() |
Пленках |
![]() |
Карточках |
![]() |
Плотность бумаги |
|
Минимальная | 52 |
Максимальная | 162 |
Факс |
|
Макс, скорость передачи данных |
33,6 Кбит/с |
Цветной |
|
PC Fax |
![]() |
Телефон |
|
Автоответчик |
|
Беспроводная трубка |
|
Стандарт DECT |
|
Проводная трубка |
|
Спикерфон |
|
Caller ID |
|
АОН |
|
Шрифты и языки управления |
|
Языки управления |
|
PostScript 2 |
|
PPDS |
|
PCL 5c |
|
|
|
PCL 6 |
![]() |
PostScript |
![]() |
PostScript 3 |
![]() |
PCL 5e |
![]() |
Количество установленных шрифтов |
|
PostScript | 136 |
PCL | 58 |
Лотки |
|
Подача бумаги |
|
Максимальная | 850 |
Стандартная | 350 |
Вывод бумаги |
|
Стандартный | 125 |
Финишер |
|
Сортировка со сдвигом |
|
Степлер |
|
Брошюровщик |
|
Электронная сортировка |
|
Сортер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Wi-Fi |
|
LPT |
|
Bluetooth |
|
Wi-Fi 802.11n |
|
Веб-интерфейс |
|
AirPrint |
|
Устройство для чтения карт памяти |
|
FireWire (IEEE 1394) |
|
RS-232 |
|
Инфракрасный порт |
|
USB |
![]() |
Ethernet (RJ-45) |
![]() |
Память/Процессор |
|
Объем памяти |
512 |
Дополнительная информация |
|
Экран |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
DOS |
|
Linux |
|
Windows |
![]() |
Mac OS |
![]() |
Потребляемая мощность |
|
При работе | 1 006 |
Габариты |
|
Ширина |
400 |
Глубина |
392 |
Высота |
406 |
Вес |
19 |
Модули
Manual Feed Section 1
DRIVE SECTION 2
EXTERIOR
FUSING SECTION 2
ADF Section 1
Electrical Components Section
MANUAL FEED SECTION 2
Paper Feed 1
ADF Section 4
Optical Writing Section
Duplex Section
PAPER EXIT SECTION
Registration Roller
ADF Section 3
OPERATION PANEL
Paper Feed 2
Fusing Section 1
Drive Section 1
ADF Section 2
Transfer
Детали Electrical Components Section
Деталь: | KEY:BUTTON:MAIN SWITCH |
Парткод: | M1601084 |
Деталь: | COIL SPRING:MAIN SWITCH |
Парткод: | M1601085 |
Деталь: | LINK:LATCH:DOOR:FRONT |
Парткод: | M1602712 |
Деталь: | COIL SPRING:LATCH:DOOR:FRONT |
Парткод: | M1602713 |
Деталь: | DOOR:FRONT:INNER:ASSY |
Парткод: | M1722700 |
Деталь: | COVER:EXTENSION TRAY:INNER:P1A |
Парткод: | M1712791 |
Деталь: | COVER:EXTENSION TRAY:2:P1A |
Парткод: | M1712792 |
Деталь: | BASE:PAPER TRAY:MANUAL FEED |
Парткод: | M1602715 |
Деталь: | GUIDE:SIDE FENCE:LEFT:MANUAL FEED |
Парткод: | M1602721 |
Деталь: | GUIDE:SIDE FENCE:RIGHT:MANUAL FEED |
Парткод: | M1602722 |
Деталь: | GEAR:RACK:SIDE FENCE:MANUAL FEED |
Парткод: | M1602723 |
Деталь: | GEAR:PIVOT |
Парткод: | M1602724 |
Деталь: | COIL SPRING:LATCH:COVER:MANUAL FEED |
Парткод: | M1602774 |
Деталь: | HOLDER:COMPRESSION SPRING:EXTENSION TRAY |
Парткод: | M1602775 |
Деталь: | Cover:Manual Feed |
Парткод: | M1602711 |
Деталь: | EXTENSION TRAY:MANUAL FEED |
Парткод: | M1602773 |
Деталь: | COVER:EXTENSION TRAY:MANUAL FEED |
Парткод: | M1602776 |
Деталь: | COVER:DOOR:FRONT:MIDDLE |
Парткод: | M1602710 |
Деталь: | DECAL:PICK-UP PAPER JAM |
Парткод: | M1722799 |
Деталь: | HOUSING:PAPER FEED |
Парткод: | M1601141 |
Деталь: | GEAR:PAPER FEED:NO.2 |
Парткод: | M1601142 |
Деталь: | GEAR:PAPER FEED:NO.3 |
Парткод: | M1601143 |
Деталь: | GEAR:TRANSFER:NO.1 |
Парткод: | M1601144 |
Деталь: | GEAR:TRANSFER:NO.2 |
Парткод: | M1601145 |
Деталь: | GEAR:MANUAL FEED TABLE:NO.1 |
Парткод: | M1601146 |
Деталь: | GEAR:MANUAL FEED:NO.1 |
Парткод: | M1601147 |
Деталь: | GEAR:MANUAL FEED:NO.2 |
Парткод: | M1601148 |
Деталь: | ELECTROMAGNETIC CLUTCH:TONER SUPPLY |
Парткод: | M1601149 |
Деталь: | GEAR:TONER SUPPLY:NO.1 |
Парткод: | M1601150 |
Деталь: | GEAR:TONER SUPPLY:NO.2 |
Парткод: | M1601151 |
Деталь: | GEAR:TONER SUPPLY:NO.3 |
Парткод: | M1601152 |
Деталь: | JOINT:TONER |
Парткод: | M1601153 |
Деталь: | GUIDE:JOINT:TONER |
Парткод: | M1601154 |
Деталь: | COIL SPRING:TONER SUPPLY |
Парткод: | M1601155 |
Деталь: | HOUSING:JOINT :TONER |
Парткод: | M1601156 |
Деталь: | SHAFT:TONER SUPPLY |
Парткод: | M1601157 |
Деталь: | GUIDE:GEAR:MANUAL FEED TABLE |
Парткод: | M1601158 |
Деталь: | BUSHING:TONER SUPPLY:ELECTROMAGNETIC CLUTCH |
Парткод: | M1601138 |
Деталь: | Cover:Motor |
Парткод: | M1601161 |
Деталь: | ELECTROMAGNETIC CLUTCH:MANUAL FEED |
Парткод: | M1601182 |
Деталь: | ELECTROMAGNETIC CLUTCH:MANUAL FEED:TRAY BOTTOM PLATE |
Парткод: | M1601183 |
Деталь: | ELECTROMAGNETIC CLUTCH:PAPER FEED |
Парткод: | M1601184 |
Деталь: | ELECTROMAGNETIC CLUTCH:REGISTRATION |
Парткод: | M1601185 |
Деталь: | ELECTROMAGNETIC CLUTCH:CONNECTING |
Парткод: | M1601186 |
Деталь: | Temperature & Humidity Sensor |
Парткод: | AW140016 |
Деталь: | COVER:UPPER:MF1AB:ASSY |
Парткод: | M1721230 |
Деталь: | COVER:LEFT:MF1AB:ASSY |
Парткод: | M1721210 |
Деталь: | COVER:RIGHT:MF1AB |
Парткод: | M1721221 |
Деталь: | COVER:BUTTON:DOOR:MF1AB |
Парткод: | M1721222 |
Деталь: | COIL SPRING:BUTTON:DOOR:MF1AB |
Парткод: | M1721223 |
Деталь: | PLATE:LOGO:RIC |
Парткод: | M0521210 |
Деталь: | Decal:Misfeed Removal |
Парткод: | M1730360 |
Деталь: | DECAL:ORIGINAL:SET:CAUTION:NA |
Парткод: | M1730361 |
Деталь: | DECAL:ORIGINAL:SET:CAUTION:CHN |
Парткод: | M1730363 |
Деталь: | DECAL:CLEANING:DOCUMENT FEEDER |
Парткод: | M1731791 |
Деталь: | Decal:Scale:Left:NA |
Парткод: | M1731792 |
Деталь: | DECAL:SCALE:LEFT:DOM/EU |
Парткод: | M1731793 |
Деталь: | DECAL:SCALE:INNER BACK |
Парткод: | M1731794 |
Деталь: | DECAL:CAUTION:ORIGINAL:NA/EU |
Парткод: | M1731796 |
Деталь: | DECAL:CAUTION:ORIGINAL:CHN |
Парткод: | M1731797 |
Деталь: | DECAL:CLEANING:EXPOSURE GLASS:NA/EU |
Парткод: | M1731799 |
Деталь: | DECAL:CLEANING:EXPOSURE GLASS:CHN |
Парткод: | M1731790 |
Деталь: | DECAL:MODEL NAME PLATE:SP_3610SF |
Парткод: | M1736640 |
Деталь: | DECAL:MODEL NAME PLATE:SP_3600SF |
Парткод: | M1726641 |
Деталь: | CLEANER:LENS:LED HEAD |
Парткод: | M1091948 |
Деталь: | SHEET:EULA:20LANGUAGES:CHN |
Парткод: | D6457901 |
Деталь: | SEAL:CAUTION:20LANGUAGES |
Парткод: | D6457902 |
Деталь: | POWER SUPPLY CODE:125V:13A:NA |
Парткод: | 11500463 |
Деталь: | POWER SUPPLY CODE:250V:10A:CHN |
Парткод: | 11500456 |
Деталь: | Power Supply Code:250V:10A:EU |
Парткод: | 11500465 |
Деталь: | MODULER CORD:NA |
Парткод: | H5235350 |
Деталь: | MODULER CORD:6PIN-6PIN |
Парткод: | H4524105 |
Деталь: | COVER:MIDDLE REAR:POWER SUPPLY UNIT |
Парткод: | M1605502 |
Деталь: | DECAL:EARTH:NE:ABS |
Парткод: | AA000267 |
Деталь: | FLAT NUT:FRAME |
Парткод: | M1604053 |
Деталь: | PLAIN SHAFT BEARING:MM6 |
Парткод: | AA082118 |
Деталь: | Exit Roller:Fusing |
Парткод: | M1604055 |
Деталь: | LEVER:ENVELOPE:LEFT |
Парткод: | M1604057 |
Деталь: | LEVER:ENVELOPE:RIGHT |
Парткод: | M1604058 |
Деталь: | SHAFT:LEVER:ENVELOPE |
Парткод: | M1604059 |
Деталь: | Compression Spring:2n |
Парткод: | M0214619 |
Деталь: | GUIDE:DUPLEX:FUSING:P1A |
Парткод: | M1714061 |
Деталь: | PLAIN SHAFT BEARING:MM4 |
Парткод: | M1604090 |
Деталь: | DRIVEN ROLLER:DUPLEX |
Парткод: | M1604091 |
Деталь: | DISCHARGE BRUSH:PRESSURE ROLLER |
Парткод: | M1604063 |
Деталь: | GROUND PLATE:PRESSURE ROLLER |
Парткод: | M1604064 |
Деталь: | RADIAL BALL BEARING: DIA6XDIA12X4 |
Парткод: | AE030083 |
Деталь: | Lever:Pressure |
Парткод: | M1604074 |
Деталь: | TENSION SPRING:PRESSURE ROLLER |
Парткод: | M1604073 |
Деталь: | PRESSURE ROLLER:DIA34 |
Парткод: | M1604096 |
Деталь: | Fusing Entrance Guide Plate:Lower |
Парткод: | M1604077 |
Деталь: | BRACKET:FUSING ENTRANCE GUIDE PLATE:RIGHT |
Парткод: | M1604079 |
Деталь: | TORSION SPRING:FUSING ENTRANCE GUIDE PLATE |
Парткод: | M1604085 |
Деталь: | GEAR:IDLER:DIA35:FUSING |
Парткод: | M1604087 |
Деталь: | GEAR:IDLER:DIA20:FUSING |
Парткод: | M1604088 |
Деталь: | GEAR:IDLER:DIA18:FUSING EXIT |
Парткод: | M1604089 |
Деталь: | DECAL:BARCODE:FUSING UNIT |
Парткод: | M0524301 |
Деталь: | COVER:FUSING:RIGHT |
Парткод: | M1604172 |
Деталь: | GATE PLATE:FUSING:P1A |
Парткод: | M1714062 |
Деталь: | TORSION SPRING:GATE PLATE:FUSING:P1 A |
Парткод: | M1714063 |
Деталь: | COIL SPRING:CLEANING ROLLER:PRESSURE ROLLER |
Парткод: | M1604080 |
Деталь: | BUSHING:FUSING CLEANING ROLLER:RIGHT |
Парткод: | M1604083 |
Деталь: | BUSHING:FUSING CLEANING ROLLER:LEFT |
Парткод: | M1604084 |
Деталь: | Cleaning Roller:Assy |
Парткод: | M1604065 |
Деталь: | DOCUMENT FEEDER:SCANNER:MF1A:ASSY (SP3600SF) |
Парткод: | M1720075 |
Деталь: | DOCUMENT FEEDER:SCANNER:MF1B:ASSY (SP3610SF) |
Парткод: | M1730075 |
Деталь: | LID:ASSY |
Парткод: | M1731660 |
Деталь: | PAPER EXIT SUB-UNIT:ASSY (SP3600SF) |
Парткод: | M1731676 |
Деталь: | PAPER EXIT SUB-UNIT:DUPLEX:ASSY (SP3610SF) |
Парткод: | M1731862 |
Деталь: | DRIVE SUB-UNIT:DOCUMENT FEEDER:ASSY (SP3600SF) |
Парткод: | M1731826 |
Деталь: | DRIVE SUB-UNIT:DOCUMENT FEEDER:DUPLEX:ASSY(SP3610SF) |
Парткод: | M1731756 |
Деталь: | HOLDER:PICKUP:ASSY (SP3600SF) |
Парткод: | M1731778 |
Деталь: | HOLDER:PICKUP:ONE SIDE:ASSY (SP3610SF) |
Парткод: | M1731758 |
Деталь: | COVER:PAPER FEED:ASSY |
Парткод: | M1731760 |
Деталь: | ORIGINAL TABLE:ASSY |
Парткод: | M1731766 |
Деталь: | FRAME:LOCK:REAR |
Парткод: | M1731772 |
Деталь: | Cover:Rear |
Парткод: | M1731773 |
Деталь: | SHEET:WHITE:DOCUMENT FEEDER |
Парткод: | M1731775 |
Деталь: | Photointerruptor |
Парткод: | M1731711 |
Деталь: | Cover:Front:Assy |
Парткод: | M1731861 |
Деталь: | EXTENSION TRAY |
Парткод: | D6064621 |
Деталь: | CABLE:MOTOR (SP3600SF) |
Парткод: | M1731839 |
Деталь: | CABLE:MOTOR:DUPLEX (SP3610SF) |
Парткод: | M1731757 |
Деталь: | ADF SECTION:RADON:DUPLEX (SP3610SF) |
Парткод: | M1730350 |
Деталь: | ADF SECTION:RADON:ONE SIDE (SP3600SF) |
Парткод: | M1730351 |
Деталь: | OPTICAL READING SECTION |
Парткод: | M1730070 |
Деталь: | PCB:DCSW |
Парткод: | D1495686 |
Деталь: | PCB:BCU:GK-MF1:ASSY |
Парткод: | M1725010 |
Деталь: | SPEAKER:B134 |
Парткод: | B1345050 |
Деталь: | POWER SUPPLY UNIT:GIM-MF1:DOM/NA |
Парткод: | AZ230267 |
Деталь: | POWER SUPPLY UNIT:GIM-MF1:EU/AA/CHN |
Парткод: | AZ230269 |
Деталь: | POWER PACK:CDVT:GIM |
Парткод: | AZ320187 |
Деталь: | SCREW:4X6 |
Парткод: | AA143592 |
Деталь: | PCB:SENSOR:TONER END SENSOR |
Парткод: | M1605120 |
Деталь: | TERMINAL:POWER PACK:ASSY |
Парткод: | M1605507 |
Деталь: | Bracket:Power Supply Unit |
Парткод: | M1605500 |
Деталь: | COVER:FRONT:POWER SUPPLY UNIT |
Парткод: | M1605501 |
Деталь: | GROUND PLATE:POWER PACK |
Парткод: | M1605515 |
Деталь: | PCB:CTL:KIBO:GIM-MF1AB:ASSY |
Парткод: | M1725709 |
Деталь: | PCB:FAX:KIBO:NA:ASSY |
Парткод: | M1725041 |
Деталь: | PCB:FAX:KIBO:EU:ASSY |
Парткод: | M1725042 |
Деталь: | C/T BOX:MF1AB |
Парткод: | M1725510 |
Деталь: | PANEL:C/T BOX:MF1AB:ASSY |
Парткод: | M1725516 |
Деталь: | Bracket:Power Pack |
Парткод: | M1605506 |
Деталь: | BRACKET:BCU:LEFT MIDDLE |
Парткод: | M1715518 |
Деталь: | BRACKET:BCU:LEFT LOWER |
Парткод: | M1715519 |
Деталь: | CLAMP:TWISTLOCK |
Парткод: | M1605555 |
Деталь: | POWER PACK:ASSY |
Парткод: | M1605022 |
Деталь: | DECAL:OPERATE:LEVER:LED |
Парткод: | M1601934 |
Деталь: | SHEET:INSULATION:KIBO |
Парткод: | M1715533 |
Деталь: | SHEET:INSULATION:FAX:KIBO |
Парткод: | M1725533 |
Деталь: | SEAL:FILTER |
Парткод: | M1725532 |
Деталь: | SHEET:INSULATION:AUX:KIBO |
Парткод: | M1715534 |
Деталь: | SHEET:INSULATION:AUX2:KIBO |
Парткод: | M1715535 |
Деталь: | BRACKET:DUCT:SUB:FAN:MAIN |
Парткод: | M1711037 |
Деталь: | DECAL:ENVELOPE:LEVER:FUSER |
Парткод: | M1604248 |
Деталь: | PICKOFF PAWL:MAIN |
Парткод: | M1601044 |
Деталь: | BRACKET:HOLDER:PICKOFFPAWL |
Парткод: | M1601045 |
Деталь: | Bracket:Drawer:Fusing |
Парткод: | M1601080 |
Деталь: | HOLDER:PICKOFF PAWL:MAIN |
Парткод: | M1601092 |
Деталь: | COIL SPRING:HOLDER:PICKOFF PAWL |
Парткод: | M1601093 |
Деталь: | COIL SPRING:TIGHTENER:PCU |
Парткод: | M1601063 |
Деталь: | TIGHTENER:PCU:RIGHT |
Парткод: | M1601066 |
Деталь: | TIGHTENER:PCU:LEFT |
Парткод: | M1601062 |
Деталь: | Rubber Foot:H5 |
Парткод: | AH010009 |
Деталь: | DECAL:LEVER:SEPARATOR:TONER CARTRIDGE |
Парткод: | M1601198 |
Деталь: | BRACKET:RAM BOARD:PCU |
Парткод: | M1601078 |
Деталь: | DECAL:H-TEMP WARNING |
Парткод: | M1601059 |
Деталь: | BRACKET:CONNECTOR:PAPER BANK |
Парткод: | M1601091 |
Деталь: | DC FAN MOTOR:60X15:P1A |
Парткод: | M1711193 |
Деталь: | DC FAN MOTOR:80X15:P1A |
Парткод: | M1711191 |
Деталь: | FAN:MM60X15:DO6R24TH |
Парткод: | GX640031 |
Деталь: | DUCT:PCDU:P1A |
Парткод: | M1711079 |
Деталь: | DECAL:DISCHARGE:HIGH TEMPERATURE:WARNING |
Парткод: | M1601028 |
Деталь: | STAY:FRAME:FRONT |
Парткод: | M1601056 |
Деталь: | DUCT:SUB:FAN:LOWER |
Парткод: | M1711038 |
Деталь: | DUCT:SUB:FAN:UPPER |
Парткод: | M1711039 |
Деталь: | CONNECTOR:ID_CHIP |
Парткод: | M1873360 |
Деталь: | GUIDE:FUSING:LEFT UPPER |
Парткод: | M1601071 |
Деталь: | GUIDE:FUSING:LEFT LOWER |
Парткод: | M1601072 |
Деталь: | LEVER:FUSING:LEFT |
Парткод: | M1601073 |
Деталь: | GUIDE:PCU:LEFT LOWER |
Парткод: | M1601061 |
Деталь: | GUIDE:FUSING:RIGHT UPPER |
Парткод: | M1601075 |
Деталь: | GUIDE:FUSING:RIGHT LOWER |
Парткод: | M1601076 |
Деталь: | LEVER:FUSING:RIGHT |
Парткод: | M1601077 |
Деталь: | GUIDE:PCU:RIGHT LOWER |
Парткод: | M1601064 |
Деталь: | COVER:FRAME:TRAY |
Парткод: | M1601095 |
Деталь: | COVER:FRAME:LOWER |
Парткод: | M1601096 |
Деталь: | GUIDE:TRAY:LEFT |
Парткод: | M1601067 |
Деталь: | GUIDE:TRAY:RIGHT |
Парткод: | M1601068 |
Деталь: | COVER:FRAME:PAPER BANK |
Парткод: | M1601094 |
Деталь: | COVER:BANKHOLE:FRONT |
Парткод: | M1601197 |
Деталь: | STAY:FRAME:REAR:ASSY |
Парткод: | M1601040 |
Деталь: | SEAL:STAY:FRAME:REAR:B |
Парткод: | M1601047 |
Деталь: | PLAIN SHAFT BEARING:MM6 |
Парткод: | AA082118 |
Деталь: | PHOTOINTERRUPTOR:LG2A14NL1 |
Парткод: | AW020198 |
Деталь: | PCB:DCSW |
Парткод: | D1495686 |
Деталь: | Bracket:Main Switch |
Парткод: | M1601082 |
Деталь: | HOLDER:MAIN SWITCH |
Парткод: | M1601083 |
Деталь: | Tray Bottom Plate:Manual Feed:Assy |
Парткод: | M1602706 |
Деталь: | LINK:BASE:SILENCER |
Парткод: | M1602733 |
Деталь: | GUIDE:LEFT:TRAY BOTTOM PLATE |
Парткод: | M1602734 |
Деталь: | GUIDE:RIGHT:TRAY BOTTOM PLATE |
Парткод: | M1602735 |
Деталь: | PAD:BASE |
Парткод: | M1602755 |
Деталь: | Holder:Friction Pad:Manual Feed:Assy |
Парткод: | M1602707 |
Деталь: | GUIDE:STAY:MANUAL FEED |
Парткод: | M1602730 |
Деталь: | GUIDE:SUB:STAY:MANUAL FEED |
Парткод: | M1602731 |
Деталь: | SHAFT:SILENCER |
Парткод: | M1602741 |
Деталь: | CAM:SILENCER:LEFT |
Парткод: | M1602742 |
Деталь: | CAM:SILENCER:RIGHT |
Парткод: | M1602743 |
Деталь: | SPRING PLATE:HOME POSITION SENSOR:SILENCER |
Парткод: | M1602744 |
Деталь: | LINK:FEELER HOME POSITION SENSOR:SILENCER |
Парткод: | M1602745 |
Деталь: | COIL SPRING:FEELER:SILENCER |
Парткод: | M1602746 |
Деталь: | Ground Plate:Manual Feed |
Парткод: | M1602747 |
Деталь: | SHEET:ENTRANCE:MIDDLE:ROLLER |
Парткод: | M1602751 |
Деталь: | SHEET:EXIT:STAY:MANUAL FEED |
Парткод: | M1602752 |
Деталь: | COIL SPRING:FRICTION PAD |
Парткод: | M1602754 |
Деталь: | SHAFT:PICKUP:MANUAL FEED |
Парткод: | M1602760 |
Деталь: | GUIDE:UPPER:MANUAL FEED |
Парткод: | M1602762 |
Деталь: | LINK:FEELER:PAPER END |
Парткод: | M1602763 |
Деталь: | PLAIN SHAFT BEARING:MM4:VERTICAL TRANSPORT |
Парткод: | AA080249 |
Деталь: | Roller:Pull Out:Option Tray |
Парткод: | B0902742 |
Деталь: | COMPRESSION SPRING:PAPER FEED:MANUAL FEED |
Парткод: | D1172725 |
Деталь: | COMPRESSION SPRING:VERTICAL TRANSPORT |
Парткод: | AA063399 |
Деталь: | PAPER FEED ROLLER:MANUAL FEED |
Парткод: | AF031092 |
Деталь: | SEAL:CLEANER:ROLLER:CONNECTING |
Парткод: | M1602737 |
Деталь: | SCREW:DIA5 |
Парткод: | B0394480 |
Деталь: | SEAL:TRAY BOTTOM PLATE:MANUAL FEED:SIDE |
Парткод: | M1602788 |
Деталь: | GROUND PLATE:MAIN SWITCH |
Парткод: | M1602795 |
Деталь: | PAPER TRAY:REAR:250 SHEET FEED UNIT:ASSY |
Парткод: | M1712550 |
Деталь: | END FENCE:250 SHEET FEED UNIT:ASSY |
Парткод: | M1712560 |
Деталь: | SHEET:SPONGE:SIDE FENCE:250 SHEET FEED UNIT |
Парткод: | M1712666 |
Деталь: | COMPRESSION SPRING:LOCK:SIDE FENCE |
Парткод: | M0752610 |
Деталь: | LEVER:LOCK:END FENCE |
Парткод: | M1602563 |
Деталь: | DECAL:OPERATION INSTRUCTIONS:TRAY:REAR |
Парткод: | M1602572 |
Деталь: | PAPER TRAY:FRONT:250 SHEET FEED UNIT:SUB-ASSY |
Парткод: | M1712600 |
Деталь: | Gear:16z |
Парткод: | B0902869 |
Деталь: | SHEET:HOLDER:250 SHEET FEED UNIT:FRONT |
Парткод: | M1712602 |
Деталь: | GUIDE:PAPER TRAY:250 SHEET FEED UNIT:FRONT |
Парткод: | M1712605 |
Деталь: | INDICATOR:PAPER VOLUME SENSOR:PAPER TRAY:250SHEET FEED UNIT |
Парткод: | M1712606 |
Деталь: | STOPPER:CASSETTE |
Парткод: | M0212609 |
Деталь: | HOLDER:FRICTION PAD:ADHESION |
Парткод: | M1602620 |
Деталь: | Compression Spring:Separation |
Парткод: | M1602623 |
Деталь: | Tray Bottom Plate:Adhesion |
Парткод: | M1602630 |
Деталь: | TENSION SPRING:TRAY BOTTOM PLATE:250 SHEET FEEDUNIT |
Парткод: | M1712627 |
Деталь: | SIDE FENCE:RIGHT:250 SHEET FEED UNIT:ASSY |
Парткод: | M1712640 |
Деталь: | LEVER:LOCK:SIDE FENCE:TRAY |
Парткод: | M1602655 |
Деталь: | HOLDER:PINION |
Парткод: | M1602641 |
Деталь: | SIDE FENCE:LEFT:250 SHEET FEED UNIT:ASSY |
Парткод: | M1712660 |
Деталь: | COMPRESSION SPRING:AUXILIARY:SIDE FENCE |
Парткод: | GA063084 |
Деталь: | ARM:TRAY BOTTOM PLATE |
Парткод: | M1602668 |
Деталь: | DIAL:PAPER SIZE SENSOR:TRAY:CHN:ASSY |
Парткод: | M1602680 |
Деталь: | DIAL:PAPER SIZE SENSOR:TRAY:EXP:ASSY |
Парткод: | M1602687 |
Деталь: | DECAL:DIAL:PAPER SIZE SENSOR:TRAY:CHN |
Парткод: | M1602681 |
Деталь: | DECAL:DIAL:PAPER SIZE SENSOR:TRAY:EXP |
Парткод: | M1602682 |
Деталь: | CLICK:DIAL:PAPER SIZE SENSOR:TRAY |
Парткод: | M1602683 |
Деталь: | GRIP:PAPER TRAY |
Парткод: | M1602631 |
Деталь: | COVER:TRAY:250 SHEET FEED UNIT:FRONT |
Парткод: | M1712691 |
Деталь: | Decal:Paper Set Direction |
Парткод: | M1602693 |
Деталь: | TIGHTENER:SPRING PLATE:TRAY:ASS*Y |
Парткод: | M1602590 |
Деталь: | SEAL TRAY:REAR:EU,CHN:250 SHEET FEED UNIT |
Парткод: | M1712607 |
Деталь: | SEAL:TRAY:REAR:NA:250 SHEET FEED UNIT |
Парткод: | M1712608 |
Деталь: | PAD:BASE |
Парткод: | GF013001 |
Деталь: | SEAL:SIDE FENCE:LEFT REAR |
Парткод: | M1712675 |
Деталь: | LID:ASSY |
Парткод: | M1731660 |
Деталь: | ROLLER:OPPOSED:ASSY |
Парткод: | M1731681 |
Деталь: | COVER:PAPER STOPPER |
Парткод: | M1731665 |
Деталь: | Bracket:Feed |
Парткод: | M1731666 |
Деталь: | SHAFT:ROLLER:OPPOSED |
Парткод: | M1731667 |
Деталь: | COIL SPRING:FEED:LOWER |
Парткод: | M1731668 |
Деталь: | COIL SPRING:FRAME GROUND WIRE:FEED |
Парткод: | M1731669 |
Деталь: | OPTICAL WRITING UNIT:ASSY |
Парткод: | M1601850 |
Деталь: | LED HEAD:1200DPI:211.3MM |
Парткод: | M1601900 |
Деталь: | COIL SPRING:HOLDER:LED |
Парткод: | M1601901 |
Деталь: | HOLDER:COIL SPRING:LED |
Парткод: | M1601902 |
Деталь: | GROUND PLATE:LED:A:LEFT |
Парткод: | M1601903 |
Деталь: | GROUND PLATE:LED:A:RIGHT |
Парткод: | M1601904 |
Деталь: | HOLDER:LED:RIGHT |
Парткод: | M1601906 |
Деталь: | SPACER:HOLDER:LED |
Парткод: | M1601916 |
Деталь: | FRAME:HOLDER:LED:ASSY |
Парткод: | M1601926 |
Деталь: | HOLDER:LED:LEFT |
Парткод: | M1601936 |
Деталь: | GROUND PLATE:LED:B |
Парткод: | M1601905 |
Деталь: | LINK:LED:A:LEFT |
Парткод: | M1601910 |
Деталь: | LINK:LED:B:LEFT |
Парткод: | M1601911 |
Деталь: | LINK:LED:C:LEFT |
Парткод: | M1601912 |
Деталь: | COIL SPRING:LINK:LED:LEFT |
Парткод: | M1601917 |
Деталь: | GUIDE:LINK:LED:LEFT |
Парткод: | M1601918 |
Деталь: | LINK:LED:A:RIGHT |
Парткод: | M1601913 |
Деталь: | LINK:LED:B:RIGHT |
Парткод: | M1601914 |
Деталь: | LINK:LED:C:RIGHT |
Парткод: | M1601915 |
Деталь: | GUIDE:LINK:LED:RIGHT |
Парткод: | M1601919 |
Деталь: | COIL SPRING:LINK:LED:RIGHT |
Парткод: | M1601928 |
Деталь: | HINGE:LED:ASSY |
Парткод: | M1601907 |
Деталь: | GUIDE:UPPER:DUPLEX UNIT |
Парткод: | M1604601 |
Деталь: | FEELER:UPPER:DUPLEX UNIT |
Парткод: | M1604603 |
Деталь: | SHAFT:IDLER:UPPER:ASSY |
Парткод: | M1604605 |
Деталь: | BUSHING:IDLER:DIA4 |
Парткод: | M1604607 |
Деталь: | COIL SPRING:IDLER:DUPLEX UNIT |
Парткод: | M1604611 |
Деталь: | SYNCHRONOUS BELT:REAR:DUPLEX UNIT |
Парткод: | M1604674 |
Деталь: | PLAIN SHAFT BEARING - 6X10X9MM |
Парткод: | AA082058 |
Деталь: | GUIDE:FRONT:DUPLEX UNIT |
Парткод: | M1604621 |
Деталь: | GRIP:FRONT:DUPLEX UNIT |
Парткод: | M1604622 |
Деталь: | HOOK:FRONT:DUPLEX UNIT |
Парткод: | M1604623 |
Деталь: | GROUND PLATE:FRONT:DUPLEX UNIT |
Парткод: | M1604624 |
Деталь: | LINK:FRAME:DUPLEX UNIT |
Парткод: | M1604625 |
Деталь: | LINK:FRONT:DUPLEX UNIT |
Парткод: | M1604626 |
Деталь: | DAMPER:FRONT:DUPLEX UNIT |
Парткод: | M1604627 |
Деталь: | SHAFT:FRONT:DUPLEX UNIT |
Парткод: | M1604631 |
Деталь: | COMPRESSION SPRING:HOOK:DUPLEX UNIT |
Парткод: | M1604633 |
Деталь: | DECAL:HANDLE:DUPLEX UNIT |
Парткод: | M1604635 |
Деталь: | GUIDE:REAR:DUPLEX UNIT |
Парткод: | M1604641 |
Деталь: | Bushing:DIA6 |
Парткод: | M1604643 |
Деталь: | SHAFT:REAR:ASSY |
Парткод: | M1604644 |
Деталь: | RUBBER BUSHING: SHAFT: REAR |
Парткод: | M1604645 |
Деталь: | PLAIN SHAFT BEARING:MM6 |
Парткод: | AA082118 |
Деталь: | GUIDE:MIDDLE:DUPLEX UNIT |
Парткод: | M1604661 |
Деталь: | GEAR:DRIVE:DUPLEX UNIT |
Парткод: | M1604662 |
Деталь: | GEAR:IDLER:DUPLEX UNIT |
Парткод: | M1604663 |
Деталь: | PULLEY:DRIVE:DUPLEX UNIT |
Парткод: | M1604664 |
Деталь: | GROUND PLATE:MIDDLE:DUPLEX UNIT |
Парткод: | M1604666 |
Деталь: | PULLEY:GEAR:DUPLEX UNIT |
Парткод: | M1604667 |
Деталь: | PULLEY:NO.2:DUPLEX UNIT |
Парткод: | M1604668 |
Деталь: | SHAFT:MIDDLE:DUPLEX UNIT |
Парткод: | M1604671 |
Деталь: | SYNCHRONOUS BELT:FRONT:DUPLEX UNIT |
Парткод: | M1604672 |
Деталь: | SYNCHRONOUS BELT:FUSING:DUPLEX UNIT |
Парткод: | M1604673 |
Деталь: | COIL SPRING:MIDDLE:DUPLEX UNIT |
Парткод: | M1604614 |
Деталь: | PLAIN SHAFT BEARING:MM6 |
Парткод: | AA082118 |
Деталь: | PHOTOINTERRUPTOR:LG2A14NL1 |
Парткод: | AW020198 |
Деталь: | ROLLER:IDLER:EXIT:P1A:ASSY |
Парткод: | M1714421 |
Деталь: | COIL SPRING:ROLLER:EXIT:P1A |
Парткод: | M1714459 |
Деталь: | COVER:UPPER:EXIT:P1A |
Парткод: | M1714453 |
Деталь: | PRESSURE PLATE:FUSING:GUIDE |
Парткод: | M1604464 |
Деталь: | FEELER:EXIT:P1A |
Парткод: | M1714486 |
Деталь: | COIL SPRING:FEELER:EXIT:P1A |
Парткод: | M1714487 |
Деталь: | COIL SPRING:PRESSURE PLATE |
Парткод: | M1604468 |
Деталь: | SHAFT:ROLLER:EXIT:P1A |
Парткод: | M1714470 |
Деталь: | GEAR:ROLLER:EXIT |
Парткод: | M1714471 |
Деталь: | GUIDE:UPPER:EXIT:P1A |
Парткод: | M1714480 |
Деталь: | COVER:REAR:P1A |
Парткод: | M1714490 |
Деталь: | ROLLER:IDLER:MIDDLE:GUIDE |
Парткод: | M1604489 |
Деталь: | FEELER:OVERFLOW:EXHAUST SENSOR:P1A |
Парткод: | M1714485 |
Деталь: | ANTISTATIC BRUSH:EXIT:P1A |
Парткод: | M1714488 |
Деталь: | GUIDE:REAR:EXIT:P1A |
Парткод: | M1714491 |
Деталь: | LEVER:DOOR:EXIT:P1A |
Парткод: | M1714493 |
Деталь: | COIL SPRING:GUIDE:REAR:EXIT |
Парткод: | M1604497 |
Деталь: | COIL SPRING:LEVER:DOOR:EXIT |
Парткод: | M1604498 |
Деталь: | GROUND PLATE:ROLLER:EXIT:P1A |
Парткод: | M1714472 |
Деталь: | DC SOLENOID:REVERSE |
Парткод: | M1714460 |
Деталь: | BRACKET:DC SOLENOID:REVERSE |
Парткод: | M1714462 |
Деталь: | COIL SPRING:DC SOLENOID:REVERSE |
Парткод: | M1714463 |
Деталь: | DAMPER:DC SOLENOID:REVERSE |
Парткод: | M1714469 |
Деталь: | LEVER:SHIFT:EXIT |
Парткод: | M1714475 |
Деталь: | GEAR:INPUT:EXIT |
Парткод: | M1714476 |
Деталь: | GEAR:SHIFT:GAP:EXIT |
Парткод: | M1714477 |
Деталь: | GEAR:SHIFT:EXIT |
Парткод: | M1714478 |
Деталь: | DECAL:LEFT:COVER:REAR |
Парткод: | M1604494 |
Деталь: | DECAL:RIGHT:COVER:REAR |
Парткод: | M1604495 |
Деталь: | DOOR:EXIT:P1A:ASSY |
Парткод: | M1714406 |
Деталь: | ROLLER TERMINAL |
Парткод: | A1532117 |
Деталь: | PLAIN SHAFT BEARING:MM8 |
Парткод: | AA082116 |
Деталь: | Registration Roller:Driven |
Парткод: | M1602900 |
Деталь: | Registration Roller:Drive |
Парткод: | M1602901 |
Деталь: | GROUND PLATE:REGISTRATION ROLLER:DRIVEN |
Парткод: | M1602902 |
Деталь: | LEVER:PRESSURE:REGISTRATION ROLLER:RIGHT |
Парткод: | M1602903 |
Деталь: | LEVER:PRESSURE:REGISTRATION ROLLER:LEFT |
Парткод: | M1602904 |
Деталь: | COIL SPRING:REGISTRATION ROLLER:PRESSURE:LEVER |
Парткод: | M1602905 |
Деталь: | GUIDE:REGISTRATION ROLLER:UPPER |
Парткод: | M1602906 |
Деталь: | DECAL:REGISTRATION:GUIDE:LEFT UPPER |
Парткод: | M1602907 |
Деталь: | DECAL:REGISTRATION ROLLER:GUIDE:UPPER |
Парткод: | M1602908 |
Деталь: | COVER:REGISTRATION ROLLER:GUIDE:UPPER |
Парткод: | M1602909 |
Деталь: | SEAL:CLEANER:REGISTRATION ROLLER:LEFT |
Парткод: | M1602922 |
Деталь: | SEAL:CLEANER:REGISTRATION ROLLER:RIGHT |
Парткод: | M1602923 |
Деталь: | SHEET:REGISTRATION ROLLER:HOLDER:SENSOR |
Парткод: | M1602917 |
Деталь: | CAP:REGISTRATION ROLLER:LEVER:RIGHT |
Парткод: | M1602919 |
Деталь: | SHEET:REGISTRATION:DUPLEX:ENTRANCE:RIGHT |
Парткод: | M1602924 |
Деталь: | SHEET:REGISTRATION:DUPLEX:ENTRANCE:LEFT |
Парткод: | M1602925 |
Деталь: | STUD:BRACKET :REGISTRATION:LEFT:ASSY |
Парткод: | M1602929 |
Деталь: | REFLECTION PHOTO SENSOR:EXIT |
Парткод: | GW010007 |
Деталь: | TORSION SPRING:REGISTRATION ROLLER:GUIDE:RIGHT |
Парткод: | M1602912 |
Деталь: | Feeler:Original Sensor |
Парткод: | M1731761 |
Деталь: | OPERATION SUB-UNIT:GIMLET-MF1A:NA:ASSY |
Парткод: | M1721401 |
Деталь: | OPERATION SUB-UNIT:GIMLET-MF1A:EU:ASSY |
Парткод: | M1721402 |
Деталь: | OPERATION SUB-UNIT:GIMLET-MF1A:CHN:ASSY |
Парткод: | M1721404 |
Деталь: | PCB:GIMLET-MF1A:OPU:MAIN |
Парткод: | M1721480 |
Деталь: | COVER:UPPER:OPERATION SUB-UNIT |
Парткод: | M1721451 |
Деталь: | Cover:Lower:Operation Sub-unit |
Парткод: | M1721452 |
Деталь: | EXCHANGE PLATE |
Парткод: | M1721453 |
Деталь: | LENS |
Парткод: | M1721456 |
Деталь: | BALANCER:EXCHANGE PLATE |
Парткод: | M1721457 |
Деталь: | MAGNETIC:DOOR |
Парткод: | M1721458 |
Деталь: | PIN:EXCHANGE PLATE |
Парткод: | M1721459 |
Деталь: | KEYTOP:10KEY:A |
Парткод: | M1721460 |
Деталь: | KEYTOP: 10KEY:A: NA |
Парткод: | M1721478 |
Деталь: | KEYTOP:10KEY:B |
Парткод: | M1721461 |
Деталь: | KEYTOP:10KEY:B:NA |
Парткод: | M1721479 |
Деталь: | Keytop:Start |
Парткод: | M1721462 |
Деталь: | KEYTOP:MIDDLE LOWER |
Парткод: | M1721463 |
Деталь: | KEYTOP:APPLICATION |
Парткод: | M1721464 |
Деталь: | KEYTOP:FUNCTION |
Парткод: | M1721465 |
Деталь: | KEYTOP:DIAL |
Парткод: | M1721466 |
Деталь: | SHEET:DIAL:COVER |
Парткод: | M1721467 |
Деталь: | SHEET:DIAL:COVER:CHN |
Парткод: | M1721469 |
Деталь: | SHEET:DIAL:SHIFT |
Парткод: | M1721468 |
Деталь: | SHEET:OPERATION SUB-UNIT:GIMLET-MF1A:NA |
Парткод: | M1721472 |
Деталь: | SHEET:OPERATION SUB-UNIT:GIMLET-MF1A:CHN |
Парткод: | M1721474 |
Деталь: | SHEET:OPERATION SUB-UNIT:GIMLET-MF1A:EU |
Парткод: | M1721473 |
Деталь: | LCD:GIMLET-MF:MV |
Парткод: | M1581498 |
Деталь: | PLAIN SHAFT BEARING:MM6 |
Парткод: | AA082118 |
Деталь: | PHOTOINTERRUPTOR:LG2A14NL1 |
Парткод: | AW020198 |
Деталь: | Compression Spring:Paper Feed |
Парткод: | M0212816 |
Деталь: | SPACER:SENSOR:PAPER SIZE SENSOR:MIDDLE |
Парткод: | M1602636 |
Деталь: | LEVER:PRESSURE RELEASE:FEED ROLLER |
Парткод: | M1602803 |
Деталь: | SHAFT:PRESSURE RELEASE:FEED ROLLER:DIA6 |
Парткод: | M1602804 |
Деталь: | SHAFT:ROLLER:PAPER TRAY:DIA6 |
Парткод: | M1602807 |
Деталь: | ROLLER:CONNECTING:PAPER TRAY:STAY |
Парткод: | M1602811 |
Деталь: | GROUND PLATE:PAPER TRAY:STAY |
Парткод: | M1602812 |
Деталь: | GUIDE:COVER:STAY:PAPER TRAY:FRONT |
Парткод: | M1602813 |
Деталь: | SHEET:REGISTRATION GUIDE:STAY:UPPER |
Парткод: | M1602816 |
Деталь: | DISCHARGE BRUSH:FEED PAPER AGAIN:STAY:REAR |
Парткод: | M1602819 |
Деталь: | FEELER:PAPER END SENSOR:PAPER TRAY:STAY |
Парткод: | M1602822 |
Деталь: | Roller:Paper Feed:Assy |
Парткод: | M1602830 |
Деталь: | PUSH SWITCH:CASSETTE:TYCO |
Парткод: | GW500004 |
Деталь: | BRACKET:SENSOR:PAPER SIZE SENSOR:250 SHEET FEED UNIT |
Парткод: | M1712581 |
Деталь: | SPACER:SENSOR:PAPER SIZE SENSOR:OUTER |
Парткод: | M1602635 |
Деталь: | PLAIN SHAFT BEARING:SUPPORT:CONNECTION:ROLLER |
Парткод: | M1602802 |
Деталь: | COVER:CONNECTOR:PAPER SIZE SENSOR:BRACKET |
Парткод: | M1602582 |
Деталь: | GUIDE:TRANSFER:AUXILIARY |
Парткод: | M1602814 |
Деталь: | STAY:PAPER TRAY |
Парткод: | M1602801 |
Деталь: | FUSING UNIT:NA:30PPM |
Парткод: | M1714017 |
Деталь: | FUSING UNIT:EU:30PPM |
Парткод: | M1714028 |
Деталь: | THERMOSTAT:LOWER |
Парткод: | AW110101 |
Деталь: | ELECTRODE PLATE:LEFT |
Парткод: | M1604106 |
Деталь: | ELECTRODE PLATE:RIGHT |
Парткод: | M1604107 |
Деталь: | DECAL:H-TEMP WARNING:SMALL |
Парткод: | D1204184 |
Деталь: | GROUND PLATE:HOT ROLLER |
Парткод: | M1604138 |
Деталь: | BRACKET:GROUND PLATE:HOT ROLLER |
Парткод: | M1604140 |
Деталь: | TENSION SPRING:PICKOFF PAWL |
Парткод: | M1604114 |
Деталь: | PICKOFF PAWL:HOT ROLLER |
Парткод: | M1604113 |
Деталь: | RADIAL BALL BEARING:35X47X7 |
Парткод: | M0124055 |
Деталь: | RETAINING RINGS-C:HOT ROLLER |
Парткод: | M0124281 |
Деталь: | Gear:Hot Roller |
Парткод: | M1604086 |
Деталь: | Hot Roller:DIA30 |
Парткод: | M1604119 |
Деталь: | THERMAL INSULATING BUSHING:HOT ROLLER |
Парткод: | M1604118 |
Деталь: | COVER:FUSING:LEFT |
Парткод: | M1604171 |
Деталь: | Fusing Entrance Guide Plate:Upper |
Парткод: | M1604130 |
Деталь: | SEPARATOR:FUSING |
Парткод: | M1604126 |
Деталь: | Bracket:Heater:Left |
Парткод: | M1604121 |
Деталь: | Bracket:Heater:Right |
Парткод: | M1604122 |
Деталь: | HEATER:740W:227V (CHN/EU) |
Парткод: | M1604207 |
Деталь: | HEATER:740W:117V |
Парткод: | M1604208 |
Деталь: | FLAT NUT:THERMISTOR |
Парткод: | M1604103 |
Деталь: | Thermistor:Fusing:Assy |
Парткод: | M1604216 |
Деталь: | GUIDE PLATE:FUSING EXIT |
Парткод: | M1604151 |
Деталь: | EXIT ROLLER:FUSING EXIT |
Парткод: | M1604154 |
Деталь: | HOLDER:EXIT ROLLER |
Парткод: | M1604155 |
Деталь: | SPRING PLATE:EXIT ROLLER |
Парткод: | M1604156 |
Деталь: | SHAFT:EXIT ROLLER:FUSING EXIT |
Парткод: | M1604159 |
Деталь: | ROLLER:MIDDLE:FUSING:DIA11 |
Парткод: | M1604157 |
Деталь: | ROLLER:MIDDLE:FUSING:DIA11 |
Парткод: | M1604158 |
Деталь: | FELT WICK:EARTH:HOT ROLLER |
Парткод: | M1604133 |
Деталь: | Thermistor:Fusing |
Парткод: | M1604102 |
Деталь: | RESISTOR:1GOHM |
Парткод: | M1604139 |
Деталь: | Bracket:Thermistor |
Парткод: | M1604134 |
Деталь: | DRAWER:FUSING:EU |
Парткод: | M1604211 |
Деталь: | DRAWER:FUSING:NA |
Парткод: | M1604212 |
Деталь: | CAP:THERMISTOR |
Парткод: | M1604173 |
Деталь: | WASHER:DIA10.1:DIA6.0:0.6T |
Парткод: | M1604141 |
Деталь: | BRACKET:MOTOR:ASSY |
Парткод: | M1601101 |
Деталь: | GEAR:MOTOR:DRIVE |
Парткод: | M1601105 |
Деталь: | GEAR:PAPER FEED:NO.1 |
Парткод: | M1601106 |
Деталь: | GEAR:DUPLEX:NO.1 |
Парткод: | M1601107 |
Деталь: | DC BRUSHLESS MOTOR:MAIN:P1A |
Парткод: | M1711108 |
Деталь: | BRACKET: MAIN:P1A:ASSY |
Парткод: | M1711111 |
Деталь: | GEAR:DRUM:NO.2:P1A |
Парткод: | M1711121 |
Деталь: | JOINT:DRUM:P1A |
Парткод: | M1711122 |
Деталь: | COIL SPRING:DRUM |
Парткод: | M1601123 |
Деталь: | GEAR:DUPLEX UNIT:NO.2 |
Парткод: | M1601124 |
Деталь: | PULLEY:FUSING:NO.1 |
Парткод: | M1601125 |
Деталь: | PULLEY:FUSING:NO.2 |
Парткод: | M1601126 |
Деталь: | SYNCHRONOUS BELT:FUSING:S3M |
Парткод: | M1601127 |
Деталь: | GEAR:FUSING:NO.1 |
Парткод: | M1601128 |
Деталь: | GEAR:FUSING:NO.2 |
Парткод: | M1601129 |
Деталь: | COIL SPRING:FUSING |
Парткод: | M1601130 |
Деталь: | HOLDER:SPLINE:JOINT |
Парткод: | M1601131 |
Деталь: | GUIDE:LINK:MAIN |
Парткод: | M1601135 |
Деталь: | LINK:MAIN |
Парткод: | M1601136 |
Деталь: | COIL SPRING:MAIN |
Парткод: | M1601137 |
Деталь: | BRACKET:FUSING |
Парткод: | M1601162 |
Деталь: | GUIDE:ELECTROMAGNETIC CLUTCH |
Парткод: | M1601163 |
Деталь: | ELECTROMAGNETIC CLUTCH:DUPLEX UNIT |
Парткод: | M1601181 |
Деталь: | LINK:FRONT |
Парткод: | M1601139 |
Деталь: | GEAR:EXIT |
Парткод: | M1711132 |
Деталь: | SHAFT:MIDDLE:JOINT |
Парткод: | M1711133 |
Деталь: | BUSHING:JOINT |
Парткод: | M1711134 |
Деталь: | PLAIN SHAFT BEARING:SEPARATION |
Парткод: | M1731809 |
Деталь: | COVER:SEPARATION:ASSY |
Парткод: | M1731865 |
Деталь: | Photointerruptor |
Парткод: | M1731711 |
Деталь: | ROLLER:SEPARATION:ASSY |
Парткод: | M1731806 |
Деталь: | COIL SPRING:SEPARATION:FRONT |
Парткод: | M1731871 |
Деталь: | COIL SPRING:SEPARATION:REAR |
Парткод: | M1731872 |
Деталь: | PHOTOINTERRUPTOR:LG2A14NL1 |
Парткод: | AW020198 |
Деталь: | STAY:TRANSFER |
Парткод: | M1603870 |
Деталь: | GUIDE:EXIT:STAY:TRANSFER:2 |
Парткод: | M1603866 |
Деталь: | SHEET:GUIDE:REGISTRATION:ENTRANCE:LEFT |
Парткод: | M1603852 |
Деталь: | SHEET:GUIDE:REGISTRATION:ENTRANCE:RIGHT |
Парткод: | M1603853 |
Деталь: | GUIDE:TRANSFER ROLLER |
Парткод: | M1603854 |
Деталь: | SHEET:GUIDE:TRANSFER ROLLER |
Парткод: | M1603855 |
Деталь: | BUSHING:TRANSFER ROLLER:LEFT |
Парткод: | M1603856 |
Деталь: | BUSHING:TRANSFER ROLLER:RIGHT |
Парткод: | M1603857 |
Деталь: | COIL SPRING:TRANSFER ROLLER |
Парткод: | M1603858 |
Деталь: | GROUND PLATE:ELECTRODE PLATE:SEPARATION |
Парткод: | M1603859 |
Деталь: | Electrode Plate:Separation |
Парткод: | M1603860 |
Деталь: | COVER:ELECTRODE PLATE:SEPARATION:2 |
Парткод: | M1603865 |
Деталь: | TRANSFER ROLLER:ASSY |
Парткод: | M1606250 |
Деталь: | SEAL:COVER:TRANSFER |
Парткод: | M1603862 |
Деталь: | SEAL:TONER CATCHPAN |
Парткод: | M1603863 |
Коды ошибок
SC101-00
SC101-01
SC120
SC121
SC230-00
SC231-00
SC270-00
SC277-00
SC277-10
SC302
SC332-00
SC364-00
SC440-00
SC498-00
SC508-00
SC520-00
SC530-00
SC531-00
SC532-00
SC541-00
SC542-01
SC542-02
SC543-00
SC544-00
SC545-00
SC547-01
SC547-02
SC547-03
SC551-00
SC553-01
SC553-02
SC554-00
SC557-00
SC559-00
SC641-00
SC653-00
SC669-01 ... SC669-26
SC669-36
SC670-00
SC681
SC682
SC688-00
SC790-00
SC816-00
SC816-01
SC816-02
SC816-03
SC816-04
SC816-05
SC816-06
SC816-07
SC816-08
SC816-09
SC816-10
SC816-11
SC816-12
SC816-13
SC816-14
SC816-15
SC816-16
SC816-17
SC816-18
SC816-19
SC816-20
SC816-22
SC816-23
SC816-24
SC816-25
SC816-26
SC816-27
SC816-28
SC816-29
SC816-30
SC816-35
SC816-36... SC816-94
SC818-00
SC833-00
SC842-01
SC850-00
SC855-00
SC855-02
SC856-00
SC870-06
SC870-07
SC870-08
SC870-09
SC870-10
SC870-11
SC870-20
SC870-21
SC870-22
SC870-23
SC870-24
SC870-25
SC870-26
SC870-27
SC870-30
SC870-31
SC870-41
SC900-00
SC920
SC990-00
SC991-00
SC992-00
SC995
SC997-00
SC998-00
Описание
Error code: | SC101-00 |
Description: | Exposure Lamp Error |
Causes: | The scanner has scanned the white plate, but cannot detect the certain white level. • Defective exposure lamp • Defective exposure lamp stabilizer • Defective power source harness • Defective signal harness • High-voltage cable leak • Defective darkness starting characteristic |
Remedy: | Turn the main power OFF and then ON. |
Error code: | SC101-01 |
Description: | CIS Error: Front Side The peak white level is less than the prescribed value. |
Causes: | • CIS is defective. • MPU is defective. • Power/signal harness is defective. • Scanner unit condensation • CIS is not set properly, or is dirty. • The white plate is not set properly, or is dirty. |
Remedy: | Check if the SC occurs by turning the power OFF then ON. If the SC occurs again, do the following steps. Check if the SC reoccurs by cycling the power after each step. 1. Clean the white guide plate. 2. Reset/clean the CIS and white plate in the scanner. 3. Replace the units in the following order: • Original front side CIS • Engine board • PSU/Signal harness |
Error code: | SC120 |
Description: | Scanner home position error 1 The scanner home position sensor did not detect the home position (did not go OFF) after the scanner moved forward 20 mm.. |
Causes: | The scanner home position sensor does not detect the scanner leaving the home position. • Defective scanner home position sensor • Defective scanner home position sensor harness • Defective scanner motor driver • Defective scanner motor |
Remedy: | • Scanner motor driver board defective • Scanner motor defective • Scanner HP sensor defective • Harness between scanner motor and scanner I/O board disconnected or broken. |
Error code: | SC121 |
Description: | Scanner home position error 2 The scanner home position sensor did not go ON after the scanner moved forward 1 mm and the feeler entered the HP sensor. |
Causes: | The scanner home position sensor does not detect the scanner coming back to the home position. • Defective scanner home position sensor • Defective scanner home position sensor harness • Defective scanner motor driver • Defective scanner motor |
Remedy: | • Scanner motor defective • Scanner HP sensor disconnected, defective |
Error code: | SC230-00 |
Description: | FGATE ON Error The FGATE signal did not turn ON within the given time period after the writing process started. |
Causes: | • GAVD defective • Image processing ASIC defective • BCU, controller board not connected correctly or defective • Harness between BCU and LDB defective |
Remedy: | • Turn the power off/on. • Replace the harness between IPU and laser unit. • Replace the IPU board. • Replace the controller board. |
Error code: | SC231-00 |
Description: | FGATE OFF Error The FGATE signal did not turn OFF within the given time period after the writing process ended. |
Causes: | • GAVD defective • Image processing ASIC defective • IPU, controller board not connected correctly or defective • Harness between IPU and LDB defective |
Remedy: | • Turn the power off/on. • Replace the harness between IPU and laser unit. • Replace the IPU board. • Replace the controller board. |
Error code: | SC270-00 |
Description: | Write ASIC communication error • When the Engine Board could not read the Unique ID of the Writing ASIC properly when starting this machine. • When an Error bit occurred in the communication between the Engine Board and the Writing ASIC. |
Causes: | The unique ID of the write ASIC was not read normally. |
Remedy: | • Turn the power OFF and then ON. • Replace the Engine Board. |
Error code: | SC277-00 |
Description: | LED Array communication error: power supply system The power supply to LED Array has been cut off due to a blown fuse or other problem. |
Causes: | Blown fuse |
Remedy: | • Check the FFC. • Turn the power OFF and then ON. • Replace the FFC. • Replace the Engine Board. |
Error code: | SC277-10 |
Description: | LEDA communication error: other The head type data was read three times in succession |
Causes: | • Defective engine board (LEDA Power Error: Broken FU7) • Defective harness between PSU – engine board • PSU fault (5V Fuse broken) • Defective controller (Defective engine interface) |
Remedy: | • Turn the main power off/on. |
Error code: | SC302 |
Description: | AC charge output error 3: C An interrupt checks the status of the power pack every 2 ms. This SC is issued if the BICU detects a short in the AC charge for black, magenta, cyan, or yellow (V = 0, for example) for 500 ms (250 times). |
Causes: | This SC is issued if the BICU detects a short in the power pack 10 times consecutively. Open circuit (+) / Short circuit (-) |
Remedy: | • High voltage power supply • BICU defective • OPC unit defective 1. Disconnect the high voltage cable from Terminal C of the multiple highvoltage supply board. 2. Attach a voltmeter to the terminal. 3. If there is no output from the terminal, replace the high voltage power supply. -or- If there is output from the terminal, test the resistance between the high voltage cable and the ground. If resistance is nearly "0", check the highvoltage harness for defects and replace it if necessary. 4. Test the conductivity between the OPC unit and the ground. If there is no conductivity between the OPC unit and ground, replace the OPC unit. 5. If there is no charge PWM signal, replace the harness and/or BICU. |
Error code: | SC332-00 |
Description: | Toner supply transfer lock This SC is issued if the error that the toner is not supplied is detected n times consecutively (n: SP2-931-005) on the condition that the toner cartridge is not in end |
Causes: | • Overload on the toner transferring part (clogging of toner) • Screw for detecting PCDU does not turn • Detector element (sensor) defective: light leak • Supplying pick does not engage • Defective Supplying clutch • Defective Drive mechanism of screw for supplying toner cartridge |
Remedy: | • Turn the main power off/on. |
Error code: | SC364-00 |
Description: | Toner End Sensor output count error When the average value of the toner end sensor output count is 0 n times consecutively (n: SP2-931-003) |
Causes: | • Connector contact failure/disconnected/broken • Detector element (sensor) does not emit light • Detecting surface inside the developing device is stained |
Remedy: | • Turn the main power off/on. |
Error code: | SC440-00 |
Description: | High Voltage Power Source: Paper Transfer : Output Error The machine detects the error detection signal “L (unexpected)” 10 times for 200 msec consecutively when monitoring the error signal every 20 msec during outputting the PWM signal. |
Causes: | Hardware error • Input / Output connector is disconnected. • Input / Output harness is short-circuited. • BCU error (signal error) • HVPS defective Load error • Transfer roller`s impedance increases. • Transfer unit is not set properly. |
Remedy: | • Cycle the main power off/on. • Reconnect or replace the harness of the HVPS (power pack). • Reconnect or replace the harness between the BCU and the HVPS. • Reset or replace the transfer unit. • Check if the contact and separation movement of the transfer unit works correctly. • Replace the HVPS. • Replace the BCU. |
Error code: | SC498-00 |
Description: | Temperature and humidity sensor error Temperature sensor output error: Below 0.76V, or above 2.90V, or Moisture sensor output error: more than 2.4V |
Causes: | • Sensor not setting (disconnection or broken) • Sensor defective |
Remedy: | Check if the SC occurs by turning the power OFF then ON. If the SC occurs again, do the following steps. Check if the SC reoccurs by cycling the power after each step. 1. Check if all connectors related to the Temperature and Humidity Sensor are connected securely. Reconnect the connectors if they are disconnected, or loose. 2. Replace the Temperature and Humidity Sensor. |
Error code: | SC508-00 |
Description: | Bypass Tray Size Detection Error The paper size detected on the bypass tray is different from any of the pattern of automatic size detection. |
Causes: | • Bypass Length Sensor or Bypass Width Sensor malfunction • Bypass Length Sensor or Bypass Width Sensor harness disconnected |
Remedy: | 1. Replace the Bypass Length Sensor, or Bypass Width Sensor. 2. Replace the harness for Bypass Length Sensor, or Bypass Width Sensor. |
Error code: | SC520-00 |
Description: | Main motor error When the main motor is driven, the lock (state of rotation) signal is checked every 100 milliseconds. If the machine detects the lock signal in the High status 20 times in succession, it reports this error. |
Causes: | • The main motor incurs too much load from a defective unit. • The main motor is defective. |
Remedy: | • Turn the main power off/on. • Replace the defective unit or the motor. |
Error code: | SC530-00 |
Description: | Fusing Exhaust Fan Lock In the motor ON state, the value of the lock sensor is checked every 100msec. If a lock signal is not obtained for 50 times consecutively. |
Causes: | • Motor defective • Connector disconnected • Harness broken • IOB defective |
Remedy: | • Replace the fusing exhaust fan. • Reconnect the connector. • Replace the harness. • Replace the Paper Transport IOB. |
Error code: | SC531-00 |
Description: | Fusing fan error The fan motor lock (rotating state) signal is sampled 30 times at 100 ms intervals and the fan goes into an unstable rotating state at least ten times. (No error detection occurs for two seconds after the start of the fan or after changing the speed.) |
Causes: | • Failed fan motor • Disconnected connector |
Remedy: | • Replace the fan motor. • Check the connector. |
Error code: | SC532-00 |
Description: | PSU cooling fan The fan motor lock (rotating state) signal is sampled 30 times at 100 ms intervals and the fan goes into an unstable rotating state at least ten times. (No error detection occurs for two seconds after the start of the fan or after changing the speed.) |
Causes: | • Failed fan motor • Disconnected connector |
Remedy: | • Replace the fan motor. • Check the connector. |
Error code: | SC541-00 |
Description: | Broken fusing (Center) thermopile wire AD value: 0-6 is detected for specified seconds continuously. Detection period: 500 ms, detection frequency: 10 times or more. |
Causes: | • Broken thermopile wire • Bad connector contact |
Remedy: | • Clear the SP: fusing SC. • Replace the connector. • Replace the thermopile. |
Error code: | SC542-01 |
Description: | Fusing lamp (Center) thermistor not reloaded 1 The heater thermistor has increased by less than 2.0 degrees in 1.5 seconds 5 times in a row. |
Causes: | • Deformed or floating thermistor • Input voltage out of range |
Remedy: | Clear the SP: fusing SC. |
Error code: | SC542-02 |
Description: | Fusing lamp (Center) thermopile not reloaded 1 The heater (Center) thermopile does not reach 50 deg C 2.9 seconds after the start of heat control (during normal startup control). |
Causes: | • Stained thermopile lens • Broken heater wire • Input voltage out of range • The overtemperature prevention mechanism started working |
Remedy: | • Clean the thermopile lens. • Replace the thermopile. • Replace the Fusing Unit. • Clear the SP: fusing SC. |
Error code: | SC543-00 |
Description: | Thermopile (Center) high temperature detection (software) Above 240 degrees C detected for 1 sec. continuously. Detection period 100ms, detection count: 10 times or more. |
Causes: | • Fusing sleeve belt defective • Paper setting misdetection • Improper paper position in the paper feed tray • Gear abrasion • Thermopile failure • Harness disconnection inside the main machine • Triac defective (short-circuit) • BCU failure • AC controller board failure |
Remedy: | 1. Inspect the fusing sleeve belt unit, and replace if damaged. 2. Check the paper settings. 3. Check the paper position in the paper feed tray. 4. Reconnect the connectors (between the fusing unit and the BCU). 5. Inspect or replace the gears inside the main machine or fusing unit. 6. Replace the thermopile (center). 7. Replace the harness between the fusing unit and the BCU or the PSU (AC controller board). 8. Replace the BCU. 9. Replace the PSU (AC controller board). If the problem cannot be solved after performing the above steps, replace the fusing unit. |
Error code: | SC544-00 |
Description: | Fusing (Center) thermopile high-temperature detected (hardware) The heating (Center) thermistor temperature becomes 250 or higher. (The hardware high-temperature error Sensor flag is detected at 10 ms intervals.) |
Causes: | • Damaged, shorted triac (element on the PSU) • Failed engine control board • Failed fusing thermopile • Failed fusing thermistor • Abnormal fusing control software behavior |
Remedy: | • Clear the SP: fusing SC. • Replace the PSU. • Replace the Engine Board. • Replace the fusing thermopile. • Replace the Fusing Unit. |
Error code: | SC545-00 |
Description: | Fusing (Center) heater stay ON The fusing (Center) heater stays ON for 3 seconds or more when in stand-by state (or the fusing roller is not rotating). |
Causes: | • Stained thermopile lens • Broken heater wire • The overtemperature prevention mechanism started working |
Remedy: | • Clear the SP: fusing SC. • Clean the thermopile lens. • Replace the fusing thermopile. • Replace the Fusing Unit. |
Error code: | SC547-01 |
Description: | Zero cross error (relay-contact soldering) Zero-cross signal is detected while the fusing relay is OFF. |
Causes: | • Fusing relay defective (contact soldering) • Fusing relay drive circuit error |
Remedy: | 1. Reconnect the connectors between PSU (AC Controller Board) and Paper Transport IOB. 2. Replace the PSU (AC Controller Board). 3. Replace the Paper Transport IOB. |
Error code: | SC547-02 |
Description: | Zero cross error (relay contact error) Zero-cross signal is not detected while the fusing relay is ON. |
Causes: | • Fusing relay damage (contact open) • Fusing relay drive circuit error • PSU fuse (24VS) blowout |
Remedy: | 1. Reconnect the connectors between PSU (AC Controller Board) and Paper Transport IOB. 2. Replace the PSU (AC Controller Board). 3. Replace the Paper Transport IOB. 4. Replace the harness between PSU (AC Controller Board) and Paper Transport IOB. |
Error code: | SC547-03 |
Description: | Zero cross error (low-frequency error) Mains power supply frequency is determined to be 44 Hz or lower. |
Causes: | Frequency instability of mains power supply |
Remedy: | 1. Check that the mains power supply frequency is higher than 44 Hz. If it is equal to or lower than 44 Hz, the mains power supply infrastructure may have defects to be dealt with. 2. Replace the PSU (AC Controller Board). |
Error code: | SC551-00 |
Description: | Broken fusing (End) thermistor wire AD value: 3F9h-3FFh is detected for specified seconds continuously. Detection period: 500 ms, detection frequency: 10 times or more |
Causes: | • Broken thermistor wire • Bad connector contact |
Remedy: | • Clear the SP: fusing SC. • Check the connector connection. • Replace the Fusing Unit. |
Error code: | SC553-01 |
Description: | Fusing (End) thermistor high-temperature detected (software) |
Causes: | In a condition of 235 degrees C or higher temperature, the temperature has increased more than 10 degrees C per 1 second, the heater has continuously reached 100% (maximum) duty, and the center thermistor has detected the failure to reach the target temperature by 11 degrees C. • Shorted triac • Failed Engine Board |
Remedy: | • Clear the SP: fusing SC. • Replace the PSU. • Replace the Engine Board. |
Error code: | SC553-02 |
Description: | Fusing (End) thermistor high-temperature detected (software) |
Causes: | The temperature is detected to stay at 245 deg C or higher for one second. • Shorted triac • Failed Engine Board |
Remedy: | • Clear the SP: fusing SC. • Replace the PSU. • Replace the Engine Board. |
Error code: | SC554-00 |
Description: | Fusing (End) thermistor high-temperature detected (hardware) The heating (End) thermistor temperature becomes 250 or higher. (The hardware high-temperature error Sensor flag is detected at 10 ms intervals.) |
Causes: | • Damaged, shorted triac (element on the PSU) • Failed engine control board • Failed fusing thermopile • Failed fusing thermistor • Abnormal fusing control software behavior |
Remedy: | • Clear the SP: fusing SC. • Replace the PSU. • Replace the Engine Board. • Replace the fusing thermopile. • Replace the Fusing Unit. |
Error code: | SC557-00 |
Description: | Zero Cross Frequency Exceeded In the event of an error |
Causes: | Frequency instability of mains power supply /Noise |
Error code: | SC559-00 |
Description: | Fusing Jam Detected for 3 Times Consecutively Fusing jam (does not reach fusing exit sensor) is detected for 3 times consecutively. • Detection conditions Displays the SC559-00 at the time of integrating the counter each time fusing jam occurs, became fusing jam counter value = 3. The counter value is retained without fusing jam also reset by OFF/ON the power supply. • Control ON/OFF And enables ON / OFF is this SC, the default is set to OFF, then ON at the time of customer requirements. SP1-142-001 0: OFF (default), 1: ON (Set at the time of customer requirements) • Counter reset condition occurs fusing jam 1. Normal paper exit has been done during this continuous fusing jam, fusing jam counter is reset. 2. When "1" is changed to "0" SP1-142-001, to reset the (SP9-912-001) fusing jam counter. 3. When after displaying SC559, SC release is made, reset the (SP9912-001) fusing jam counter. |
Causes: | • Stripper plate not mounted properly • Gear abrasion • Fusing motor failure |
Remedy: | 1. Inspect or replace the stripper plate. 2. Replace the gears inside the main machine or fusing unit. 3. Replace the fusing motor. 4. Replace the fusing unit. |
Error code: | SC641-00 |
Description: | Communication error between BCU and Controller board. Controller board does not respond after BCU tries to communicate three times. |
Causes: | • Controller board software error • Connect error between BCU and Controller board • Engine board software error |
Remedy: | • Check connections between Controller board and BCU. • Turn the main switch off and on. |
Error code: | SC653-00 |
Description: | Incorrect remote service ID2 |
Causes: | ID2 stored in the NVRAM has either of the following problems. • Number of characters is not 17. • Includes a character that cannot be printed. • All spaces • NULL |
Remedy: | Replace the NVRAM. Clear the RC Gate install status, write the common certificate, and then begin installation again |
Error code: | SC669-01 ... SC669-26 |
Description: | EEPROM communication error |
Causes: | An error is notified during EEPROM communication and the printer does not recover after three retries. 669 - 1 ID error during EEPROM OPEN 669 - 2 Channel error during EEPROM OPEN 669 - 3 Device error during EEPROM OPEN 669 - 4 Communication interrupted error during EEPROM OPEN 669 - 5 Communication timeout error 669 - 6 Not operating error during EEPROM OPEN 669 - 7 Buffer full during EEPROM OPEN 669 - 8 No error code during EEPROM OPEN 669 - 9 ID error 669 - 10 No error code during EEPROM Close 669 - 11 ID error during EEPROM data write 669 - 12 Channel error during EEPROM data write 669 - 13 Device error during EEPROM data write 669 - 14 Communication interrupted error during EEPROM data write 669 - 15 Communication timeout error 669 - 16 Not operating error during EEPROM data write 669 - 17 Buffer full during EEPROM data write 669 - 18 No error code during EEPROM data write 669 - 19 ID error during EEPROM data read 669 - 20 Channel error EEPROM data read 669 - 21 Device error during EEPROM data read 669 - 22 Communication interrupted error during EEPROM data read 669 - 23 Communication timeout error 669 - 24 Not operating error during EEPROM data rea• Electromagnetic noise • EEPROM errord 669 - 25 Buffer full during EEPROM data read 669 - 26 No error code during EEPROM data read • Electromagnetic noise • EEPROM error |
Remedy: | • Turn the main power OFF and then ON. • Replace the BCU |
Error code: | SC669-36 |
Description: | EEPROM: Verify Error The machine receives an error notification during EEPROM (BCU) communication and does not resume after 2 retries. The machine detects an abnormal value in the EEPROM data when starting up, or recovery from energy saver mode. |
Causes: | • Electrical noise • EEPROM not connected fully • EEPROM damaged • BCU damaged |
Remedy: | • Turn the power off/on. • Check the EEPROM. • Replace the EEPROM. • Replace the BCU. |
Error code: | SC670-00 |
Description: | Engine start up error Case 1 • /ENGRDY signal was not asserted when the machine was turned on or returned from energy saver mode. • /IPURDY signal was not asserted when the machine was turned on or returned from energy saver mode. • EC response was not received within specified time from power on. • PC response was not received within specified time from power on. • SC response was not received within specified time from power on. • Writing to Rapi driver failed (the other party not found through PCI). Case 2 • Unexpected down status was detected after /ENGRDY assertion. |
Causes: | Case 1 • Engine board does not start up. Case 2 • Engine board reset unexpectedly. |
Remedy: | Check the connection between the engine board and the controller board. • If it is always reproduced, replace the engine board. If the problem persists, consider replacing the controller board or other boards between them. • If reproducibility is low, multiple causes are to be considered, such as software, engine board, controller board, and PSU. |
Error code: | SC681 |
Description: | Toner bottle: ID Chip Communication error When error notification was received during communication with the tag and operation is not resumed after N*1 retries. *1 See the detailed table below. |
Causes: | • Corrupted ID data • Disconnected ID chip • No ID chip • Noise |
Remedy: | Turn the main power off, and then do the following. 1. Clean ID chip connections inside the toner bottle, and check if any of the ID Chip Contact Board connector pins have snapped. If there are any snapped pins, do step 5. 2. Replace the toner bottle. 3. Reconnect the connectors between Imaging IOB and ID chip contact board. 4. Reconnect the FFC between Imaging IOB and BCU. 5. Replace the ID chip contact board. 6. Reconnect the harness between Imaging IOB and ID chip contact board. 7. Replace the FFC between Imaging IOB and BCU. 8. Replace the Imaging IOB. 9. Replace the BCU. |
Error code: | SC682 |
Description: | TD sensor communication error TD sensor cannot be recovered after retrying N*1 times for an ID chip communication error. |
Causes: | • Corrupted ID data • Disconnected ID chip • No ID chip • Noise |
Remedy: | Turn the main power off, and then do the following. 1. Reconnect the connectors between Imaging IOB and TD sensor. 2. Reconnect the FFC between Imaging IOB and BCU. 3. Replace the PCDU. 4. Reconnect the harness between Imaging IOB and TD sensor. 5. Replace the FFC between Imaging IOB and BCU. 6. Replace the Imaging IOB. 7. Replace the BCU. • If the last digit of the SC’s branch number (-**) is: 1 or 6, then do the above steps for K 2 or 7, then do the above steps for M 3 or 8, then do the above steps for C 4 or 9, then do the above steps for Y |
Error code: | SC688-00 |
Description: | PRREQ signal not asserted The print request signal (PRREQ) signal is not asserted within the prescribed time after paper reaches the registration stand-by position, |
Causes: | • Noise • Engine Board error • Controller Board error |
Remedy: | • Turn the power OFF and then ON • Replace the Engine Board. • Replace the Controller Board. |
Error code: | SC790-00 |
Description: | Maximum number of banks (paper tray units) exceeded error This SC occurs if you stack two or more paper feed units. Only one optional paper feed unit can be installed. |
Causes: | The number of installed paper tray units exceeds the specifications. |
Remedy: | Reduce the number of installed paper tray units according to the specifications. |
Error code: | SC816-00 |
Description: | Energy save I/O subsystem error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-01 |
Description: | Subsystem error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-02 |
Description: | Sysarch (LPUX_GET_PORT_INFO) error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-03 |
Description: | Transition to STR was denied. |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-04 |
Description: | Interrupt in kernel communication driver |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-05 |
Description: | Preparation for transition to STR failed. |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-06 |
Description: | Preparation for transition to STR failed. |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-07 |
Description: | Sysarch (LPUX_GET_PORT_INFO) error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-08 |
Description: | Sysarch (LPUX_ENGINE_TIMERCTRL) error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-09 |
Description: | Sysarch (LPUX_RETURN_FACTOR_STR) error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-10 |
Description: | Sysarch (LPUX_GET_PORT_INFO) error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-11 |
Description: | Sysarch (LPUX_GET_PORT_INFO) error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-12 |
Description: | Sysarch (LPUX_GET_PORT_INFO) error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-13 |
Description: | open() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-14 |
Description: | Memory address error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-15 |
Description: | open() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-16 |
Description: | open() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-17 |
Description: | open() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-18 |
Description: | open() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-19 |
Description: | Double open() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-20 |
Description: | open() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-22 |
Description: | Parameter error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-23 |
Description: | read() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-24 |
Description: | read() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-25 |
Description: | read() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-26 |
Description: | write() communication retry error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-27 |
Description: | write() communication retry error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-28 |
Description: | write() communication retry error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-29 |
Description: | write() communication retry error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-30 |
Description: | write() communication retry error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-35 |
Description: | read() error |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC816-36... SC816-94 |
Description: | Subsystem error |
Causes: | Energy save I/O subsystem detected some abnormality. • Energy save I/O subsystem defective • Energy save I/O subsystem detected a controller board error (nonresponse). • Error was detected during preparation for transition to STR. |
Remedy: | • Turn the main power off/on. • Replace the controller board. |
Error code: | SC818-00 |
Description: | Watchdog timer error The system program fell into a bus-hold state or an endless loop of the program interruption occurred, causing other process to stop. |
Causes: | • System program defective • Controller board defective • Optional board defective |
Remedy: | • Turn the main power OFF/ON. • Replace the controller board. |
Error code: | SC833-00 |
Description: | [0F10] Fsync input timeout |
Causes: | After the /PRREQ signal is detected, the /FSYNC(/FGATE) signal of the first color is not detected even after the specified time has elapsed. Connector, harness defective FGATE control error EGB defective |
Error code: | SC842-01 |
Description: | Insufficient Nand-Flash blocks (threshold exceeded) At startup, or when machine returned from low power mode, the Nand-Flash status was read and judged that the number of unusable blocks had exceeded threshold, and then SCS generated the SC code. |
Causes: | Number of unusable blocks exceeded threshold for Nand-Flash |
Remedy: | Replace the controller board. |
Error code: | SC850-00 |
Description: | Network I/F error |
Causes: | The access to the network work is unavailable due to an error in the printer driver. |
Error code: | SC855-00 |
Description: | Wireless LAN board error (driver attachment failure) |
Causes: | Wireless LAN board error (wireless LAN card: 802.11 is covered) • Defective wireless LAN board • Loose connection |
Remedy: | • Turn the main power off/on. • Replace wireless LAN board |
Error code: | SC855-02 |
Description: | Wireless LAN board error (driver initialization failure) Wireless LAN board error (wireless LAN card: 802.11 is covered) |
Causes: | • Defective wireless LAN board • Loose connection |
Remedy: | • Turn the main power OFF/ON. • Replace wireless LAN board |
Error code: | SC856-00 |
Description: | Fax board error |
Causes: | Fax board error • The connection between the Fax board and controller board is faulty. • Defective Fax board. |
Remedy: | • Turn the main power off/on. • Reinstall the Fax board. • Replace the Fax board. |
Error code: | SC870-06 |
Description: | Address Book data error (Initialization: Failed to generate a file to store information required for LDAP search.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-07 |
Description: | Address Book data error (Initialization: Failed to initialize entries required for machine operation.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-08 |
Description: | Address Book data error (Machine configuration: HDD is present but the space for storing the Address Book is unusable.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-09 |
Description: | Address Book data error (Machine configuration: Inconsistency in the NVRAM area used for storing settings required for Address Book configuration.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-10 |
Description: | Address Book data error (Machine configuration: Cannot make a directory for storing the Address Book in the SD/USB FlashROM.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-11 |
Description: | Address Book data error (On startup: Inconsistency in Address Book entry number.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-20 |
Description: | Address Book data error (File I/O: Failed to initialize file.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-21 |
Description: | Address Book data error (File I/O: Failed to generate file.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-22 |
Description: | Address Book data error (File I/O: Failed to open file.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-23 |
Description: | Address Book data error (File I/O: Failed to write to file.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-24 |
Description: | Address Book data error (File I/O: Failed to read file.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-25 |
Description: | Address Book data error (File I/O: Failed to check file size.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-26 |
Description: | Address Book data error (File I/O: Failed to delete data.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-27 |
Description: | Address Book data error (File I/O: Failed to add data.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-30 |
Description: | Address Book data error (Search: Failed to obtain data from cache when searching in the machine Address Book. delivery destination/sender.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-31 |
Description: | Address Book data error (Search: Failed to obtain data from cache during LDAP search.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC870-41 |
Description: | Address Book data error (Cache: Failed to obtain data from cache.) |
Causes: | When an error related to the Address Book is detected during startup or operation. • Software bug • Inconsistency of Address Book source location (machine/delivery server/LDAP server) • Inconsistency of Address Book encryption setting or encryption key (Controller board was replaced without formatting the Address Book) • Address Book storage device (SD/HDD) was temporarily removed or hardware configuration does not match the application configuration. • Address Book data corruption was detected. |
Remedy: | • Turn the main power switch off and on. • Initialize the Address Book (SP5-846-050). • If the above solution does not cause the machine to recover to SC870-07, replace the controller board. |
Error code: | SC900-00 |
Description: | Electric counter error The electric total counter value is out of specification. Error is detected when increasing the total counter. |
Causes: | • Unexpected NV-RAM is attached. • NV-RAM defective • NV-RAM data corrupted. • Data written to unexpected area because of external factor etc. • The count requested by the SRM on receiving PRT is not completed. |
Remedy: | Replace the NV-RAM. |
Error code: | SC920 |
Description: | Printer error 1. An internal application error was detected and operation cannot continue. |
Causes: | • The software’s bug • Unexpected hardware configuration such as insufficient memory |
Remedy: | • Software defective; turn the machine OFF/ON, or change the controller firmware • Insufficient memory |
Error code: | SC990-00 |
Description: | Software operation error Software attempted an unexpected operation. |
Causes: | • Parameter error • Internal parameter error • Insufficient work memory • Operation error caused by abnormalities that are normally undetectable. |
Remedy: | • Turn the main power off/on. • Reinstall the software of the controller and BCU board. |
Error code: | SC991-00 |
Description: | Recoverable software operation error Software attempted an unexpected operation. SC991 covers recoverable errors as opposed toCS990. |
Causes: | • Parameter error • Internal parameter error • Insufficient work memory • Operation error caused by abnormalities that are normally undetectable. |
Remedy: | Logging only |
Error code: | SC992-00 |
Description: | Undefined SC issued. An SC, that is not controlled by the system, occurred. |
Causes: | • An SC for the previous model was used mistakenly, etc. • Basically a software bug. |
Remedy: | Turn the main power OFF/ON. |
Error code: | SC995 |
Description: | CPM setting error |
Causes: | Comparison of machine serial number (11 digits) and machine identification code. Details: • Machine serial number cannot be identified because of BICU replacement or malfunctioning. • Machine serial number cannot be identified because of NV-RAM replacement. Machine serial number (11 digits) or machine identification code does not match. |
Remedy: | • Replace the board(s) to match the CPM of the controller and BICU boards. • Turn the main power switch off and on. |
Error code: | SC997-00 |
Description: | Application function selection error The application selected by the operation panel key operated abnormally (No response, abnormal ending). |
Causes: | Software bug (mainly the application) |
Remedy: | • Check the optional RAM, DIMM, boards required by the application program. • Check if the combination of downloaded programs are correct. |
Error code: | SC998-00 |
Description: | Application start error • No application was registered to system within a specified time after the main power was turned on. (No application starts/All applications have been terminated abnormally) • Application started but cannot be drawn now for some reason. |
Causes: | • Software bug (mainly the application) • The optional RAM, DIMM, boards required by the application program. Are not installed correctly. |
Remedy: | • Turn the main power OFF/ON. • Check the optional RAM, DIMM, boards • Check the combination of programs • Replace the controller board. |