Riso EZ220
Рейтинг
Модули
Drum Area(4):A3/Ledger models EZ590, 570, 390, 370
Drum Area(4) B4 models EZ-330,230
Electrical Component Area(3)
Elevator-Safety SW Area
Suction Area EZ2x0
Paper-Feed Tray
Master Making Area(1)
Master Removal Area(1)
Exterior Cover Area
Drum-Rail Area
Drum Area(1)
Drum Area(3)
Roller System Area
Drive Mechanism Area(2) (EZ2x0)
Separation Area (EZ5x0, 3x0)
Drum Area(2)
Electrical Component Area(1) EZ3 Panel
Drive Mechanism Area(2) (EZ3x0, 5x0)
Paper Receiving Tray Area EZ5x0, 3x0
Master Making Area(4)
Electrical Component Area(1) EZ5 Panel
Drive Mechanism Area(1)
Master Removal Area(3)
Master Making Area(3)
Separation Area (EZ2x0)
Stage Cover Area
Clamp Area
Drum Area(4) A4/Legal/Letter models EZ300, 200, 220
Master Making Area(2)
Suction Area EZ3x0
Scraper Area (EZ3x0, 5x0)
Electrical Component Area(1) EZ2 Panel
Main Body Area
Paper Receiving Tray Area EZ2x0
Electrical Component Area(2)
Scanner Area(1)
Suction Area EZ5x0
Master Removal Area(2)
Drive Mechanism Area(3)
Scanner Area(2)
Scraper Area (EZ2x0)
Детали Electrical Component Area(1) EZ5 Panel
| Деталь: | Squeegee Unit A3(16-32,35) |
| Парткод: | 023-75090-158 |
| Деталь: | Main Frame Drum |
| Парткод: | 023-75164-151 |
| Деталь: | Flange Support Roller Drum |
| Парткод: | 023-17116-007 |
| Деталь: | LOCK RING 4 |
| Парткод: | 023-17197-007 |
| Деталь: | S-GAP CAM |
| Парткод: | 024-17027-001 |
| Деталь: | Fixing Plate Drive Shaft A3 |
| Парткод: | 023-17294-002 |
| Деталь: | Stepped Screw F6X3 M4X4 |
| Парткод: | 635-00003-008 |
| Деталь: | Center Shaft Drum |
| Парткод: | 023-17018-005 |
| Деталь: | Gear M1X45X6 |
| Парткод: | 612-10026-001 |
| Деталь: | Base Ink Blocking Plate (Front) |
| Парткод: | 023-17229-006 |
| Деталь: | Ink Blocking Plate Front |
| Парткод: | 023-17227-003 |
| Деталь: | Shaft Screw Ink Blocking Plate |
| Парткод: | 015-36317-305 |
| Деталь: | STEP SCREW |
| Парткод: | 635-17433-103 |
| Деталь: | Spring Ink Blocking Plate |
| Парткод: | 015-36318-000 |
| Деталь: | Base Ink Blocking Plate (Rear) |
| Парткод: | 023-17228-000 |
| Деталь: | Ink Blocking Plate Rear |
| Парткод: | 023-17226-007 |
| Деталь: | *Squeegee Roller |
| Парткод: | 023-17030-242 |
| Деталь: | *Doctor Roller Assy A3 |
| Парткод: | 023-17329-108 |
| Деталь: | *Ink Drive Shaft |
| Парткод: | 023-17035-104 |
| Деталь: | *Block F Squeegee |
| Парткод: | 023-17041-147 |
| Деталь: | *Metal S4X7X2 |
| Парткод: | 607-03001-001 |
| Деталь: | *O Ring P4-1.9 |
| Парткод: | 640-60040-000 |
| Деталь: | *Side Frame Squeegee F Assy |
| Парткод: | 024-17126-107 |
| Деталь: | *Adj. Plate R Squeegee Gap |
| Парткод: | 023-17334-209 |
| Деталь: | *Adj. Plate L Squeegee Gap |
| Парткод: | 023-17336-201 |
| Деталь: | *Gear M0.8X19X4 |
| Парткод: | 612-10027-008 |
| Деталь: | *Gear M0.8X43X3 |
| Парткод: | 612-10028-101 |
| Деталь: | *Side Frame Squeegee R Assy |
| Парткод: | 024-17125-100 |
| Деталь: | *Block R Squeegee |
| Парткод: | 023-17040-140 |
| Деталь: | *Gear M1x25x7 OWC |
| Парткод: | 612-10024-106 |
| Деталь: | *Sheet Squeegee Roller |
| Парткод: | 639-00004-003 |
| Деталь: | *P Washer 8X18.5X1 |
| Парткод: | 639-00003-007 |
| Деталь: | *Plate P-washer |
| Парткод: | 023-17423-007 |
| Деталь: | Spring Doctor Roller |
| Парткод: | 023-17333-008 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | *P Washer 8X16X0.4 |
| Парткод: | 639-00005-000 |
| Деталь: | Squeegee Unit B4(16-36) |
| Парткод: | 023-75091-154 |
| Деталь: | Main Frame Drum |
| Парткод: | 023-75164-151 |
| Деталь: | Flange Support Roller Drum |
| Парткод: | 023-17116-007 |
| Деталь: | LOCK RING 4 |
| Парткод: | 023-17197-007 |
| Деталь: | S-GAP CAM |
| Парткод: | 024-17027-001 |
| Деталь: | Fixing Plate Drive A4 |
| Парткод: | 023-17246-008 |
| Деталь: | Stepped Screw F6X3 M4X4 |
| Парткод: | 635-00003-008 |
| Деталь: | Center Shaft Drum |
| Парткод: | 023-17018-005 |
| Деталь: | Gear M1X45X6 |
| Парткод: | 612-10026-001 |
| Деталь: | Base Ink Blocking Plate (Front) |
| Парткод: | 023-17229-006 |
| Деталь: | Ink Blocking Plate Front |
| Парткод: | 023-17227-003 |
| Деталь: | Shaft Screw Ink Blocking Plate |
| Парткод: | 015-36317-305 |
| Деталь: | STEP SCREW |
| Парткод: | 635-17433-103 |
| Деталь: | Spring Ink Blocking Plate |
| Парткод: | 015-36318-000 |
| Деталь: | Base Ink Blocking Plate (Rear) |
| Парткод: | 023-17228-000 |
| Деталь: | Ink Blocking Plate Rear |
| Парткод: | 023-17226-007 |
| Деталь: | *Squeegee Roller B4 |
| Парткод: | 023-17230-241 |
| Деталь: | *Doctor Roller Assy B4 |
| Парткод: | 023-17330-106 |
| Деталь: | *Ink Drive Shaft B4 |
| Парткод: | 023-17239-109 |
| Деталь: | *Block F Squeegee |
| Парткод: | 023-17041-147 |
| Деталь: | *Metal S4X7X2 |
| Парткод: | 607-03001-001 |
| Деталь: | *O Ring P4-1.9 |
| Парткод: | 640-60040-000 |
| Деталь: | *Side Frame Squeegee F Assy |
| Парткод: | 024-17126-107 |
| Деталь: | *Adj. Plate L Squeegee Gap |
| Парткод: | 023-17336-201 |
| Деталь: | *Gear M0.8X19X4 |
| Парткод: | 612-10027-008 |
| Деталь: | *Gear M0.8X43X3 |
| Парткод: | 612-10028-101 |
| Деталь: | *Side Frame Squeegee R Assy |
| Парткод: | 024-17125-100 |
| Деталь: | *Block R Squeegee |
| Парткод: | 023-17040-140 |
| Деталь: | *Gear M1x25x7 OWC |
| Парткод: | 612-10024-106 |
| Деталь: | *Adj. Plate R Squeegee Gap |
| Парткод: | 023-17334-209 |
| Деталь: | *Support Bracket F B4 |
| Парткод: | 023-17235-308 |
| Деталь: | *Support Bracket R B4 |
| Парткод: | 023-17234-204 |
| Деталь: | *Plate Metal Drive Shaft Drum |
| Парткод: | 023-17242-002 |
| Деталь: | *Support Plate A |
| Парткод: | 023-17421-004 |
| Деталь: | *Support Plate B |
| Парткод: | 023-17422-000 |
| Деталь: | *Sheet Squeegee Roller |
| Парткод: | 639-00004-003 |
| Деталь: | *P Washer 8X18.5X1 |
| Парткод: | 639-00003-007 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | Spring Doctor Roller |
| Парткод: | 023-17333-008 |
| Деталь: | Bracket Mecha & NeoROSA |
| Парткод: | 046-50001-104 |
| Деталь: | Bracket Option I/F |
| Парткод: | 046-50002-003 |
| Деталь: | Cover Plate NIC |
| Парткод: | 046-50014-001 |
| Деталь: | Cover Bracket CF |
| Парткод: | 046-50003-000 |
| Деталь: | NeoROSA-PCB |
| Парткод: | 046-50500-208 |
| Деталь: | NeoROSA-PCB OP |
| Парткод: | 046-50515-000 |
| Деталь: | NeoROSA-PCB (C) |
| Парткод: | 046-50501-000 |
| Деталь: | NeoROSA-PCB OP (C) |
| Парткод: | 046-50516-007 |
| Деталь: | MECHA-CTL PCB II ML |
| Парткод: | 046-75005-104 |
| Деталь: | MECHA-CTL PCB II LL |
| Парткод: | 046-75503-103 |
| Деталь: | MECHA-CTL PCB II L |
| Парткод: | 046-75504-100 |
| Деталь: | MECHA-CTL PCB II LL(C) |
| Парткод: | 046-75507-002 |
| Деталь: | MECHA-CTL PCB II L(C) |
| Парткод: | 046-75508-106 |
| Деталь: | Hinge Rear Left Upper |
| Парткод: | 046-50004-006 |
| Деталь: | Secure Bracket Rear Lower |
| Парткод: | 046-50007-005 |
| Деталь: | Hinge Rear Left Lower |
| Парткод: | 046-50005-002 |
| Деталь: | Bracket Upper Junction PCB M.-M. |
| Парткод: | 023-28204-005 |
| Деталь: | Bracket Lower Junction PCB M.-M. |
| Парткод: | 023-28221-007 |
| Деталь: | M.-Making Junction PCB |
| Парткод: | 023-28218-200 |
| Деталь: | Wire Harness Guide Plate |
| Парткод: | 023-50067-003 |
| Деталь: | TPH Drawer Connector H (G) |
| Парткод: | 046-53014-002 |
| Деталь: | Wire Harness Safety SW M.-Rmv. |
| Парткод: | 046-53009-009 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 046-53004-007 |
| Деталь: | Wire Harness Paper Feed Rear LL |
| Парткод: | 046-53017-001 |
| Деталь: | Wire Harness M-Rmv/Panel |
| Парткод: | 046-53007-103 |
| Деталь: | Wire Harness Panel.M-Rmv L/LL |
| Парткод: | 046-53019-101 |
| Деталь: | Wire Harness Paper Feed Rear |
| Парткод: | 046-53005-003 |
| Деталь: | Wire Harness Lower R (G) |
| Парткод: | 046-53016-005 |
| Деталь: | Wire Harness NeoROSA |
| Парткод: | 046-53010-007 |
| Деталь: | USB Inner Cable |
| Парткод: | 046-53013-006 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 046-53008-002 |
| Деталь: | Wire Saddle LWS-2218 |
| Парткод: | 665-02055-004 |
| Деталь: | Clamp RLWC-7SV0 |
| Парткод: | 665-02073-002 |
| Деталь: | Wire Saddle LWS-1316 |
| Парткод: | 665-02043-006 |
| Деталь: | BATTERY CR-2032 |
| Парткод: | 408-02300-001 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | Elevator Motor Assy(21-30) |
| Парткод: | 023-75078-050 |
| Деталь: | Side Frame R Elevator |
| Парткод: | 023-12207-500 |
| Деталь: | Side Frame F Elevator |
| Парткод: | 023-12216-607 |
| Деталь: | Absorber Gear ll P.-F. |
| Парткод: | 023-12261-009 |
| Деталь: | Elevator Shaft Assy |
| Парткод: | 023-75159-050 |
| Деталь: | Reinforcement Plate Elevator |
| Парткод: | 023-12232-106 |
| Деталь: | ELEVATOR RACK P.-F. |
| Парткод: | 023-12201-006 |
| Деталь: | Lower Limit Frame P.-F. |
| Парткод: | 046-12216-008 |
| Деталь: | Support Lower limit Frame P.-F. |
| Парткод: | 023-12206-008 |
| Деталь: | Bracket F Spring Lower Safety SW |
| Парткод: | 023-12251-003 |
| Деталь: | Bracket R Spring Lower Safety SW |
| Парткод: | 023-12252-000 |
| Деталь: | Spring Elevator Safety SW Lower |
| Парткод: | 023-12237-000 |
| Деталь: | Elevator Safety SW |
| Парткод: | 023-53023-007 |
| Деталь: | BRACKET LOWER LIMIT SENSOR |
| Парткод: | 023-12233-307 |
| Деталь: | Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Spring Elevator |
| Парткод: | 023-12202-100 |
| Деталь: | Bracket Elevator Spring P.-F. |
| Парткод: | 023-12203-009 |
| Деталь: | Hook Rear Elevator Spring |
| Парткод: | 023-12231-002 |
| Деталь: | Guide Flexible Wire P.-F. |
| Парткод: | 023-12238-007 |
| Деталь: | Bearing Flaw678 ZZA |
| Парткод: | 600-50057-006 |
| Деталь: | Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | *Cover Elevator Motor |
| Парткод: | 023-12247-006 |
| Деталь: | *Motor Chassis Elevator Motor |
| Парткод: | 023-12234-206 |
| Деталь: | *Gear Cover Elevator Motor |
| Парткод: | 023-12223-000 |
| Деталь: | *Gear M1x24 |
| Парткод: | 612-10009-107 |
| Деталь: | *Gear M0.8X23+M0.8X14 |
| Парткод: | 612-80011-001 |
| Деталь: | *Gear M0.8X30+M0.8X14 |
| Парткод: | 612-80012-008 |
| Деталь: | *Gear M0.8X29+M1X14 |
| Парткод: | 612-80013-004 |
| Деталь: | *Elevator Motor Collar |
| Парткод: | 023-12244-104 |
| Деталь: | *Motor Assy (CWRS-445PA) |
| Парткод: | 023-74001-054 |
| Деталь: | *Support Clamp Worm |
| Парткод: | 030-19205-001 |
| Деталь: | Wire Harness Elevator Motor |
| Парткод: | 023-12602-108 |
| Деталь: | Bracket Paper Feed Junction PCB |
| Парткод: | 046-12201-000 |
| Деталь: | Junction PCB II Paper Feed |
| Парткод: | 046-12203-003 |
| Деталь: | Wire Harness Paper Feed Rear |
| Парткод: | 046-53005-003 |
| Деталь: | WIRE HARNESS PF TRAY |
| Парткод: | 024-12607-107 |
| Деталь: | Wire Harness Safety SW M.-Rmv. |
| Парткод: | 046-53009-009 |
| Деталь: | Suction Unit II LL(1-19) |
| Парткод: | 046-75025-075 |
| Деталь: | *P.-E. Pulley Suction |
| Парткод: | 020-13116-205 |
| Деталь: | *Shaft Belt Driven Pulley |
| Парткод: | 023-21361-202 |
| Деталь: | *Flat Belt 15X0.65X519 |
| Парткод: | 629-00002-004 |
| Деталь: | *Metal F6X10/9X6:12 X 1.5 |
| Парткод: | 607-13000-402 |
| Деталь: | *Drive Shaft Suction |
| Парткод: | 023-21351-207 |
| Деталь: | *Roller (Inner) Transfer Belt |
| Парткод: | 030-15249-004 |
| Деталь: | *Pulley P40S2M60 |
| Парткод: | 611-90002-003 |
| Деталь: | *Belt 40-S2M-138 |
| Парткод: | 621-00003-002 |
| Деталь: | *Bracket Paper Receiving sensor |
| Парткод: | 023-21401-000 |
| Деталь: | *Sensor GP2A210LCSJF |
| Парткод: | 444-33012-000 |
| Деталь: | *Wire Harness Ejection Sensor |
| Парткод: | 023-21703-006 |
| Деталь: | *Face Cover Suction |
| Парткод: | 023-21304-004 |
| Деталь: | *Suction Box Suction |
| Парткод: | 023-21302-001 |
| Деталь: | *Suction Motor Ccwrs-55PH |
| Парткод: | 023-74002-050 |
| Деталь: | **Metal Slit Motor |
| Парткод: | 023-21342-100 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Fan E1033H24BYAZ-33 |
| Парткод: | 490-41014-007 |
| Деталь: | *Base Frame Suction |
| Парткод: | 046-21301-000 |
| Деталь: | *Bracket Fix Wing |
| Парткод: | 046-21311-005 |
| Деталь: | Wire Harness Suction unit L/LL |
| Парткод: | 046-21803-005 |
| Деталь: | Cover plate suction cover |
| Парткод: | 023-21384-008 |
| Деталь: | Cover Plate Suction |
| Парткод: | 023-21381-300 |
| Деталь: | De-electricity Brush 180 |
| Парткод: | 045-21316-000 |
| Деталь: | Seal Folding Tray Inst. P.-Rcv.-T. |
| Парткод: | 023-21801-008 |
| Деталь: | Fixing Pin |
| Парткод: | 020-13114-300 |
| Деталь: | Mount Bracket Front Suction Unit |
| Парткод: | 023-21391-101 |
| Деталь: | Mount Bracket Rear Suction Unit |
| Парткод: | 023-21392-108 |
| Деталь: | Wire Harness Paper Feed Rear LL |
| Парткод: | 046-53017-001 |
| Деталь: | Fix Wing F |
| Парткод: | 023-21334-108 |
| Деталь: | Fix Wing R |
| Парткод: | 023-21333-101 |
| Деталь: | P.-F.-T.Unit II(1-32) |
| Парткод: | 046-74002-004 |
| Деталь: | *Paper Feed Tray Upper |
| Парткод: | 023-12101-206 |
| Деталь: | *L.O. Sheet |
| Парткод: | 020-11520-009 |
| Деталь: | *Seal Closing Tray Instruction P.-F.-T |
| Парткод: | 023-12150-002 |
| Деталь: | *Bracket Catch |
| Парткод: | 023-12126-004 |
| Деталь: | Junction PCB II P.-F.-T |
| Парткод: | 046-12202-007 |
| Деталь: | *Wire Harness II P.-F.-T |
| Парткод: | 046-12700-007 |
| Деталь: | *Potentiometer P.-F.-T |
| Парткод: | 023-12605-204 |
| Деталь: | *Shaft Potentiometer Gear |
| Парткод: | 023-12241-105 |
| Деталь: | *Gear M1X50X6 |
| Парткод: | 612-10023-002 |
| Деталь: | *Sensor PS124TD1 |
| Парткод: | 444-33013-007 |
| Деталь: | *Side Guide F P.-F.-T |
| Парткод: | 023-12139-203 |
| Деталь: | *Side Guide R P.-F.-T |
| Парткод: | 023-12140-201 |
| Деталь: | *Seal Setting Instruction P.-F.-T |
| Парткод: | 023-12147-001 |
| Деталь: | *Lever P.-F.-T. |
| Парткод: | 023-12108-006 |
| Деталь: | *Link Plate A P.-F.-T. |
| Парткод: | 023-12109-002 |
| Деталь: | *Link Plate B P.-F.-T. |
| Парткод: | 023-12128-104 |
| Деталь: | *Slide Rack II P.-F.-T |
| Парткод: | 046-12101-006 |
| Деталь: | *Flexible Wire Cover P.-F.-T. |
| Парткод: | 023-12130-001 |
| Деталь: | *Gear Slide Rack P.-F.-T. |
| Парткод: | 011-11514-000 |
| Деталь: | *Guide Plate Slide Rack |
| Парткод: | 023-12129-003 |
| Деталь: | *Connector Cover |
| Парткод: | 023-12125-008 |
| Деталь: | *Bottom Frame P.-F.-T. |
| Парткод: | 023-12102-008 |
| Деталь: | *Shaft P.-F. Tray |
| Парткод: | 023-12132-004 |
| Деталь: | *Adj. NUT P.-F.-T. |
| Парткод: | 023-12123-102 |
| Деталь: | *Adjuster Dial P.-F.-T. |
| Парткод: | 023-12133-000 |
| Деталь: | *Bracket P.-F.-T. |
| Парткод: | 023-12121-207 |
| Деталь: | *Bracket Hinge Cover |
| Парткод: | 023-12155-209 |
| Деталь: | *One-Way Hinge OWNF6-1NRS |
| Парткод: | 610-10009-005 |
| Деталь: | *Gear M1x20x7 |
| Парткод: | 612-10036-007 |
| Деталь: | *Shaft Damper Hinge P-F-T |
| Парткод: | 023-12254-100 |
| Деталь: | *Adj. Seal P.-F.-T |
| Парткод: | 021-04011-104 |
| Деталь: | *STEPPED SCREW F6X1.8 M3X4 |
| Парткод: | 635-00001-005 |
| Деталь: | MAGNET CATCH SM50-P |
| Парткод: | 660-00002-004 |
| Деталь: | Bracket Magnet Catch P.-Rcv.-T. |
| Парткод: | 023-21643-003 |
| Деталь: | WIRE HARNESS PF TRAY |
| Парткод: | 024-12607-107 |
| Деталь: | Holder Flexible Wire P.-F.-T. |
| Парткод: | 023-12138-002 |
| Деталь: | Master Making Unit II |
| Парткод: | 046-75027-078 |
| Деталь: | Master Making Unit II |
| Парткод: | 046-75028-074 |
| Деталь: | Master Making Unit II |
| Парткод: | 046-75029-070 |
| Деталь: | Master Making Unit II |
| Парткод: | 046-75030-079 |
| Деталь: | Master Making Unit II |
| Парткод: | 046-75031-075 |
| Деталь: | *Write Pulse Motor Assy |
| Парткод: | 023-75145-157 |
| Деталь: | **Bracket |
| Парткод: | 023-28195-006 |
| Деталь: | **Motor |
| Парткод: | 490-33015-002 |
| Деталь: | **Gear Pulley |
| Парткод: | 613-10002-002 |
| Деталь: | **Belt |
| Парткод: | 620-80001-008 |
| Деталь: | **Belt |
| Парткод: | 620-80002-004 |
| Деталь: | *Pulley Assy |
| Парткод: | 611-90010-006 |
| Деталь: | *Bracket |
| Парткод: | 023-28016-004 |
| Деталь: | *Bracket Bottom |
| Парткод: | 023-28401-005 |
| Деталь: | *MASTER-MAKING-PCB |
| Парткод: | 046-28001-206 |
| Деталь: | *Wire Harness |
| Парткод: | 023-28239-208 |
| Деталь: | FRONT COVER |
| Парткод: | 023-28222-003 |
| Деталь: | SEAL |
| Парткод: | 023-28944-009 |
| Деталь: | SEAL |
| Парткод: | 023-28428-000 |
| Деталь: | Slide Rail |
| Парткод: | 023-17063-000 |
| Деталь: | Bracket Front Upper |
| Парткод: | 023-28001-007 |
| Деталь: | Pre-Pressure Spring |
| Парткод: | 023-17139-104 |
| Деталь: | Bracket Rear Upper |
| Парткод: | 023-28002-003 |
| Деталь: | Pre-Pressure Spring |
| Парткод: | 023-17140-102 |
| Деталь: | Slide Rail 2 |
| Парткод: | 023-28402-001 |
| Деталь: | Bracket Front Bottom |
| Парткод: | 023-28084-000 |
| Деталь: | Bracket Rear Bottom |
| Парткод: | 023-28012-009 |
| Деталь: | SHAFT HOLDER |
| Парткод: | 046-28003-004 |
| Деталь: | WIRE HARNESS |
| Парткод: | 046-53016-005 |
| Деталь: | Positioning Pin |
| Парткод: | 023-28086-002 |
| Деталь: | STEPPED SCREW |
| Парткод: | 635-10004-002 |
| Деталь: | BRACKET |
| Парткод: | 023-28085-006 |
| Деталь: | TPH Drawer Connector H (G) |
| Парткод: | 046-53014-002 |
| Деталь: | GUIDE LOWER |
| Парткод: | 023-28199-001 |
| Деталь: | GUIDE UPPER |
| Парткод: | 023-28117-005 |
| Деталь: | Guide Bracket |
| Парткод: | 023-28010-006 |
| Деталь: | Holding Plate |
| Парткод: | 023-28353-000 |
| Деталь: | Flexible Wire |
| Парткод: | 023-28238-104 |
| Деталь: | Guide Roller |
| Парткод: | 023-28200-000 |
| Деталь: | BRACKET |
| Парткод: | 023-28003-000 |
| Деталь: | SHAFT |
| Парткод: | 023-28122-106 |
| Деталь: | Hook Stopper |
| Парткод: | 023-28121-002 |
| Деталь: | SPRING |
| Парткод: | 023-28339-008 |
| Деталь: | SOLENOID |
| Парткод: | 490-50006-009 |
| Деталь: | Push Button SW Assy |
| Парткод: | 021-51029-100 |
| Деталь: | COVER |
| Парткод: | 023-28119-008 |
| Деталь: | BRACKET |
| Парткод: | 023-28202-100 |
| Деталь: | SPRING |
| Парткод: | 023-28403-008 |
| Деталь: | BRACKET |
| Парткод: | 023-28404-004 |
| Деталь: | Safety SW Assy |
| Парткод: | 023-53025-000 |
| Деталь: | Sensor GP1A75ER |
| Парткод: | 444-30002-101 |
| Деталь: | WIRE HARNESS |
| Парткод: | 046-53015-009 |
| Деталь: | GASKET |
| Парткод: | 481-30046-102 |
| Деталь: | Disposal Unit Assy(1-9) |
| Парткод: | 046-74001-008 |
| Деталь: | *Cover Disposal Box |
| Парткод: | 046-24036-005 |
| Деталь: | *Disposal Box |
| Парткод: | 046-24035-203 |
| Деталь: | *Box Lever Disposal box |
| Парткод: | 023-24140-347 |
| Деталь: | *Lock Lever |
| Парткод: | 045-24001-000 |
| Деталь: | *Handle Spring Disposal Box |
| Парткод: | 023-24148-003 |
| Деталь: | *Spring Box Cover |
| Парткод: | 024-24141-200 |
| Деталь: | *Seal Disposal Instruction A |
| Парткод: | 046-24143-006 |
| Деталь: | *Seal Disposal Instruction B |
| Парткод: | 046-24144-002 |
| Деталь: | *Detection Sheet Box Set |
| Парткод: | 046-24145-009 |
| Деталь: | Bracket M.-Rmv. |
| Парткод: | 023-24132-000 |
| Деталь: | Cover M.-Rmv. |
| Парткод: | 023-24103-000 |
| Деталь: | Front door |
| Парткод: | 046-34001-005 |
| Деталь: | Emblem EZ570E |
| Парткод: | 046-34014-000 |
| Деталь: | Emblem EZ370E |
| Парткод: | 046-34023-009 |
| Деталь: | Emblem EZ300E |
| Парткод: | 046-34017-009 |
| Деталь: | Emblem EZ230E |
| Парткод: | 046-34018-005 |
| Деталь: | Emblem EZ200E |
| Парткод: | 046-34019-001 |
| Деталь: | Emblem EZ570A |
| Парткод: | 046-34015-006 |
| Деталь: | Emblem EZ370A |
| Парткод: | 046-34027-004 |
| Деталь: | Emblem EZ330A |
| Парткод: | 046-34041-007 |
| Деталь: | Emblem EZ230A |
| Парткод: | 046-34026-008 |
| Деталь: | Emblem EZ220A |
| Парткод: | 046-34025-001 |
| Деталь: | Emblem EZ200A |
| Парткод: | 046-34024-005 |
| Деталь: | Emblem EZ590U |
| Парткод: | 046-34013-003 |
| Деталь: | Emblem EZ390U |
| Парткод: | 046-34031-001 |
| Деталь: | Emblem EZ310U |
| Парткод: | 046-34028-000 |
| Деталь: | Emblem EZ230U |
| Парткод: | 046-34030-005 |
| Деталь: | Emblem EZ220U |
| Парткод: | 046-34029-007 |
| Деталь: | Emblem EZ5700AG |
| Парткод: | 046-34044-006 |
| Деталь: | Emblem EZ3700AG |
| Парткод: | 046-34048-001 |
| Деталь: | Emblem EZ2300AG |
| Парткод: | 046-34047-005 |
| Деталь: | Emblem EZ2000AG |
| Парткод: | 046-34046-009 |
| Деталь: | Emblem EZ590UG |
| Парткод: | 046-34045-002 |
| Деталь: | Emblem EZ390UG |
| Парткод: | 046-34051-002 |
| Деталь: | Emblem EZ310UG |
| Парткод: | 046-34050-006 |
| Деталь: | Emblem EZ220UG |
| Парткод: | 046-34049-008 |
| Деталь: | Emblem EV5790C |
| Парткод: | 046-34057-043 |
| Деталь: | Emblem EV5690C |
| Парткод: | 046-34016-002 |
| Деталь: | Emblem EV3790C |
| Парткод: | 046-34053-005 |
| Деталь: | Emblem EV3760C |
| Парткод: | 046-34052-009 |
| Деталь: | Emblem EV3750C |
| Парткод: | 046-34043-000 |
| Деталь: | Emblem EV3690C |
| Парткод: | 046-34037-000 |
| Деталь: | Emblem EV3660C |
| Парткод: | 046-34036-003 |
| Деталь: | Emblem EV3560C |
| Парткод: | 046-34056-004 |
| Деталь: | Emblem EV3490C |
| Парткод: | 046-34035-007 |
| Деталь: | Emblem EV3460C |
| Парткод: | 046-34033-004 |
| Деталь: | Emblem EV2590C |
| Парткод: | 046-34055-008 |
| Деталь: | Emblem EV2560C |
| Парткод: | 046-34054-001 |
| Деталь: | Emblem EV2550C |
| Парткод: | 046-34042-003 |
| Деталь: | Emblem EV2490C |
| Парткод: | 046-34034-000 |
| Деталь: | Emblem EV2460C |
| Парткод: | 046-34032-008 |
| Деталь: | MAGNET CATCH |
| Парткод: | 021-11220-100 |
| Деталь: | Cover Catch |
| Парткод: | 660-05106-002 |
| Деталь: | Door Catch |
| Парткод: | 660-05105-006 |
| Деталь: | Fixed Plate Rotary Catch |
| Парткод: | 021-11140-106 |
| Деталь: | FRONT COVER |
| Парткод: | 023-34004-409 |
| Деталь: | Ink Replace Instruction Sticker Pic |
| Парткод: | 023-17305-004 |
| Деталь: | SEAL COUNTER |
| Парткод: | 021-04050-002 |
| Деталь: | SEAL COUNTER PIC. |
| Парткод: | 021-04051-009 |
| Деталь: | Seal M.-M. Unit Release Eng |
| Парткод: | 023-28958-000 |
| Деталь: | Seal M.-M. Unit Release Pic |
| Парткод: | 023-28955-000 |
| Деталь: | Cover Master Loading |
| Парткод: | 023-34015-109 |
| Деталь: | Hinge Top Front Door |
| Парткод: | 023-34006-207 |
| Деталь: | Hinge Bottom Front Door |
| Парткод: | 023-34007-203 |
| Деталь: | Panel Cover Bottom |
| Парткод: | 023-37014-103 |
| Деталь: | Side Cover Paper Ejection Side |
| Парткод: | 046-34004-004 |
| Деталь: | Scanner Cover Right |
| Парткод: | 046-34003-008 |
| Деталь: | Cover Scanner P.-Rcv. Side |
| Парткод: | 023-34041-207 |
| Деталь: | Side Cover Paper Feeding Side |
| Парткод: | 023-34032-100 |
| Деталь: | Cover Scanner Paper Feeding Side |
| Парткод: | 023-34040-103 |
| Деталь: | Side Cover Drive Side |
| Парткод: | 023-34021-109 |
| Деталь: | Scanner Cover Rear |
| Парткод: | 046-34006-007 |
| Деталь: | Rear Cover MLA3 |
| Парткод: | 046-34002-109 |
| Деталь: | Rear Cover L/LL |
| Парткод: | 046-34101-000 |
| Деталь: | Bracket Lower Rear Cover |
| Парткод: | 023-34024-108 |
| Деталь: | Bracket Left Scanner Rear Cover |
| Парткод: | 023-34025-104 |
| Деталь: | Bracket Right Scanner Rear Cover |
| Парткод: | 023-34026-100 |
| Деталь: | Seal Magnet Adjuster |
| Парткод: | 023-34054-007 |
| Деталь: | SHEET FRONT DOOR DET. SENSOR |
| Парткод: | 699-04003-107 |
| Деталь: | Stepped Screw F5.3X3.5 M4X6 |
| Парткод: | 635-10014-008 |
| Деталь: | Fixed Plate Download Cover |
| Парткод: | 023-34085-000 |
| Деталь: | Fixed Plate M Loading Cover |
| Парткод: | 023-34083-007 |
| Деталь: | Cover Seal |
| Парткод: | 046-34007-003 |
| Деталь: | Caution Seal USB (J) |
| Парткод: | 046-34008-107 |
| Деталь: | Seal Voltage SW |
| Парткод: | 046-50018-007 |
| Деталь: | Drum Lock Assy(10-19) |
| Парткод: | 023-75134-058 |
| Деталь: | Slide Rail |
| Парткод: | 023-17063-302 |
| Деталь: | Drum Support Left Rail |
| Парткод: | 023-17062-101 |
| Деталь: | Drum Support Right Rail |
| Парткод: | 023-17061-105 |
| Деталь: | Pre-Pressure Spring Left Drum |
| Парткод: | 023-17140-102 |
| Деталь: | Pre-Pressure Spring Right Drum |
| Парткод: | 023-17139-104 |
| Деталь: | Bridge Drum Rail |
| Парткод: | 023-17060-206 |
| Деталь: | Right Guide Drum Frame Front |
| Парткод: | 023-17203-201 |
| Деталь: | Left Guide Drum Frame Front |
| Парткод: | 023-17204-208 |
| Деталь: | Seal Drum Set Position |
| Парткод: | 023-17302-005 |
| Деталь: | *Drum Lock Base |
| Парткод: | 023-17087-201 |
| Деталь: | *Solenoid Tds-10A-1056 |
| Парткод: | 490-50006-009 |
| Деталь: | *Shaft Drum Solenoid Lever |
| Парткод: | 023-17132-100 |
| Деталь: | *Drum Solenoid Lever |
| Парткод: | 023-17131-200 |
| Деталь: | *Spring Drum Lock |
| Парткод: | 023-17082-005 |
| Деталь: | *Spring Safety SW /Drum&Mm |
| Парткод: | 023-28403-105 |
| Деталь: | *Bracket M.-M. Unit set SW |
| Парткод: | 023-28404-004 |
| Деталь: | *Drum Safety SW |
| Парткод: | 023-53024-003 |
| Деталь: | *Bracket Drum Lock Sensor |
| Парткод: | 023-17164-109 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Bracket Drawer Connector Drum |
| Парткод: | 023-17133-106 |
| Деталь: | Wire Harness Drum Drawer H (G) |
| Парткод: | 046-53018-008 |
| Деталь: | Base Bracket B Position Lock |
| Парткод: | 046-17004-009 |
| Деталь: | Guide B Position Lock Release |
| Парткод: | 046-17003-002 |
| Деталь: | Shaft Holder Right |
| Парткод: | 030-16108-005 |
| Деталь: | Shaft Holder Left |
| Парткод: | 030-16109-001 |
| Деталь: | Wire Harness Lower F (G) |
| Парткод: | 046-53015-009 |
| Деталь: | Guide Front Cover |
| Парткод: | 023-17400-007 |
| Деталь: | Wire Harness Lower R (G) |
| Парткод: | 046-53016-005 |
| Деталь: | Drum Frame Front |
| Парткод: | 023-17048-141 |
| Деталь: | Slide Shaft |
| Парткод: | 023-17045-100 |
| Деталь: | Bracket Drum Lever |
| Парткод: | 023-17207-002 |
| Деталь: | Drum Lever |
| Парткод: | 023-17095-000 |
| Деталь: | Drum Handle Cover |
| Парткод: | 023-17135-206 |
| Деталь: | Bracket Drum Lock |
| Парткод: | 023-17154-103 |
| Деталь: | Shaft Drum Lock Plate |
| Парткод: | 023-17138-205 |
| Деталь: | link Plate Drum Lock |
| Парткод: | 023-17161-002 |
| Деталь: | link Shaft Drum Lock |
| Парткод: | 023-17162-106 |
| Деталь: | Plate Drum Lock |
| Парткод: | 023-17136-008 |
| Деталь: | Stepped Screw Dia.5X2 M3X3 |
| Парткод: | 635-17523-102 |
| Деталь: | Spring Drum Lock link |
| Парткод: | 023-17177-103 |
| Деталь: | Bracket Drum-PCB |
| Парткод: | 023-17175-003 |
| Деталь: | Drum PCB II |
| Парткод: | 046-17178-007 |
| Деталь: | Wire Harness Drum Drawer U |
| Парткод: | 046-17100-008 |
| Деталь: | Spring Drawer Connector |
| Парткод: | 023-17144-000 |
| Деталь: | Stepped Screw F5X26 M3X4 |
| Парткод: | 635-10009-101 |
| Деталь: | Stay Drum Frame Front |
| Парткод: | 023-17192-005 |
| Деталь: | B Pos. Lock Lever |
| Парткод: | 023-17159-504 |
| Деталь: | Cover B Position Lock Lever |
| Парткод: | 023-17244-005 |
| Деталь: | B Position Lock Chip |
| Парткод: | 023-17273-005 |
| Деталь: | Lock Spring B Pos. |
| Парткод: | 023-17054-001 |
| Деталь: | Side Frame Drum |
| Парткод: | 023-17046-106 |
| Деталь: | Drum Guide |
| Парткод: | 023-17092-000 |
| Деталь: | Drum Frame Rear |
| Парткод: | 023-17044-200 |
| Деталь: | Cover Rear Handle |
| Парткод: | 023-17176-000 |
| Деталь: | liner Pom Rear Frame Drum |
| Парткод: | 023-17094-003 |
| Деталь: | Cover Front Frame Drum |
| Парткод: | 023-17091-209 |
| Деталь: | Seal Drum Set Position |
| Парткод: | 023-17302-005 |
| Деталь: | Seal Setting Cartridge |
| Парткод: | 023-17301-009 |
| Деталь: | B Position Marking Sticker |
| Парткод: | 023-17307-007 |
| Деталь: | Seal Ink Color |
| Парткод: | 023-17306-205 |
| Деталь: | Seal Ink Black |
| Парткод: | 023-17320-003 |
| Деталь: | Seal Drum Type |
| Парткод: | 023-17321-409 |
| Деталь: | Adj. Plate Drum Lock |
| Парткод: | 023-17403-006 |
| Деталь: | Stepped Screw F5X2 M3X3:SG |
| Парткод: | 635-10011-106 |
| Деталь: | Bottle Guide Assy 2(6-16,23) |
| Парткод: | 046-75037-057 |
| Деталь: | Bottle Stay |
| Парткод: | 023-17025-206 |
| Деталь: | Ink Distributor |
| Парткод: | 030-16404-003 |
| Деталь: | Ink Distributor A4 |
| Парткод: | 023-17212-006 |
| Деталь: | O Ring P10-2.4 |
| Парткод: | 640-60100-100 |
| Деталь: | Ground Plate Ink |
| Парткод: | 023-17254-000 |
| Деталь: | Ink-Sensor-PCB A3 |
| Парткод: | 444-51005-003 |
| Деталь: | Ink-Sensor-PCB B4 |
| Парткод: | 444-51006-000 |
| Деталь: | *Cartridge Guide Lower |
| Парткод: | 023-17155-207 |
| Деталь: | *Maintenance Cap |
| Парткод: | 023-17160-006 |
| Деталь: | *Bracket Ink Bottle Set SW |
| Парткод: | 023-17158-109 |
| Деталь: | *Bottle Catch |
| Парткод: | 023-17157-102 |
| Деталь: | *Bottle Set SW Assy |
| Парткод: | 023-17026-105 |
| Деталь: | *Shaft Rf-Tag Reader Drum |
| Парткод: | 023-17249-104 |
| Деталь: | *ARM RF Module |
| Парткод: | 046-17009-000 |
| Деталь: | *Module Holder R Drum |
| Парткод: | 046-17017-003 |
| Деталь: | *Module Holder F Drum |
| Парткод: | 046-17008-004 |
| Деталь: | *Cartridge Guide Upper |
| Парткод: | 046-17010-009 |
| Деталь: | *RF Module B5J-0171 |
| Парткод: | 444-59008-001 |
| Деталь: | Ink Pump Assy(18-21) |
| Парткод: | 023-17145-309 |
| Деталь: | *Ink Motor Assy |
| Парткод: | P400238375 |
| Деталь: | *Gear M1x32x4 |
| Парткод: | 612-12306-001 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-002 |
| Деталь: | Wire Harness Drum U (G) |
| Парткод: | 046-17101-004 |
| Деталь: | *Spring Rf-Tag Reader Drum |
| Парткод: | 023-17250-005 |
| Деталь: | Pressure Roller Assy II A3(1-8) |
| Парткод: | 046-75013-077 |
| Деталь: | Pressure Roller Assy II B4(1-8) |
| Парткод: | 046-75014-073 |
| Деталь: | Pressure Roller Assy II A4(1-8) |
| Парткод: | 046-75035-003 |
| Деталь: | Timing Roller Assy(10-12) |
| Парткод: | 023-75093-050 |
| Деталь: | Guide Roller Assy(20-28) |
| Парткод: | 023-75080-152 |
| Деталь: | Guide Plate Assy II(30-33,54-58) |
| Парткод: | 046-75001-052 |
| Деталь: | Stripper Unit(35-52) |
| Парткод: | 023-75089-150 |
| Деталь: | *Pressure Shaft |
| Парткод: | 046-19003-000 |
| Деталь: | *Paper Guide Pressure |
| Парткод: | 023-19013-108 |
| Деталь: | *Stopper Pressure Roller |
| Парткод: | 023-19012-004 |
| Деталь: | *Support Shaft Pressure |
| Парткод: | 046-19001-007 |
| Деталь: | *Pressure Roller Support Front Assy |
| Парткод: | 023-75071-056 |
| Деталь: | *Pressure Roller Support Rear Assy |
| Парткод: | 023-75072-052 |
| Деталь: | *Pressure Roller A3 |
| Парткод: | 023-74068-078 |
| Деталь: | *Pressure Roller B4 |
| Парткод: | 023-74069-074 |
| Деталь: | *Pressure Roller A4 |
| Парткод: | 023-75120-057 |
| Деталь: | *Stepped Screw 6X1.8 M3X4 |
| Парткод: | 635-17613-004 |
| Деталь: | Metal F16X22/19X6 26X2 |
| Парткод: | 607-10003-001 |
| Деталь: | *Timing Roller |
| Парткод: | 023-12501-107 |
| Деталь: | *Bearing Timing Roller |
| Парткод: | 023-12503-100 |
| Деталь: | *Gear M1X15X12 |
| Парткод: | 612-02101-207 |
| Деталь: | METAL F10X15/14X6 18X2 |
| Парткод: | 607-16001-000 |
| Деталь: | Adj. Plate Timing Roller |
| Парткод: | 023-12507-105 |
| Деталь: | P Washer 6X13.5X1 |
| Парткод: | 639-00610-000 |
| Деталь: | BEARING DDLF-1910ZZR |
| Парткод: | 601-10195-004 |
| Деталь: | Load Spring |
| Парткод: | 030-14476-300 |
| Деталь: | Collar Load Spring |
| Парткод: | 023-12510-009 |
| Деталь: | Fix Plate Load Spring |
| Парткод: | 030-14458-203 |
| Деталь: | *Guide Roller |
| Парткод: | 023-12511-102 |
| Деталь: | *Support F Guide Roller |
| Парткод: | 023-12515-000 |
| Деталь: | *Adj. Plate Guide Roller |
| Парткод: | 023-12545-007 |
| Деталь: | *Metal F8X11/10X5.5 14X2 |
| Парткод: | 607-40001-003 |
| Деталь: | *Lock Plate Guide Roller |
| Парткод: | 023-12519-006 |
| Деталь: | *Support R Guide Roller |
| Парткод: | 023-12516-104 |
| Деталь: | *Pressure Shaft Guide Roller |
| Парткод: | 023-12513-202 |
| Деталь: | *Shaft Guide Roller |
| Парткод: | 023-12512-206 |
| Деталь: | *Pressure Plate Guide Roller |
| Парткод: | 023-12514-101 |
| Деталь: | Stay Holder Guide Plate |
| Парткод: | 023-12537-101 |
| Деталь: | *Sensor OF-11R-N23 (Upper) |
| Парткод: | 444-32007-003 |
| Деталь: | *Wire Harness Paper Sensor U |
| Парткод: | 046-12702-000 |
| Деталь: | *Guide Plate (Lower) |
| Парткод: | 046-12503-007 |
| Деталь: | *Guide Plate (Upper) |
| Парткод: | 023-12533-408 |
| Деталь: | Back Cover Stripper Unit |
| Парткод: | 023-12543-004 |
| Деталь: | *Spring Angle Adj. Stripper |
| Парткод: | 023-12429-201 |
| Деталь: | *Spring Tension Stripper |
| Парткод: | 023-12403-008 |
| Деталь: | *Stripper Support RZ-L |
| Парткод: | 023-12425-109 |
| Деталь: | *Guide Block Front Stripper Unit |
| Парткод: | 023-12431-001 |
| Деталь: | *Unfix Lever Stripper Unit |
| Парткод: | 023-12430-005 |
| Деталь: | *Lock Fixing Block |
| Парткод: | 030-14521-100 |
| Деталь: | *Lock Lever Stripper Unit |
| Парткод: | 023-12428-108 |
| Деталь: | *Ground Spring Roller System |
| Парткод: | 018-31614-001 |
| Деталь: | *Arm Stripper pressure |
| Парткод: | 023-12412-007 |
| Деталь: | *Bracket Stripper Base |
| Парткод: | 023-12402-109 |
| Деталь: | *Stripper Assy RZ |
| Парткод: | 023-12434-000 |
| Деталь: | *Cover F Stripper Pad |
| Парткод: | 019-11832-000 |
| Деталь: | *Base F Stripper Pad |
| Парткод: | 019-11831-100 |
| Деталь: | *Stripper Pad 70 |
| Парткод: | 019-11833-006 |
| Деталь: | *Stepped Screw:6X2.2 M4X2.5 |
| Парткод: | 635-00002-001 |
| Деталь: | *Bracket Hook Stripper Pressure |
| Парткод: | 023-12427-101 |
| Деталь: | *Worm Gear Box Stripper Unit |
| Парткод: | 023-12409-308 |
| Деталь: | *Adjuster Dial Stripper Unit |
| Парткод: | 023-12405-108 |
| Деталь: | Tube 3x5 |
| Парткод: | 030-14480-004 |
| Деталь: | *Cover Paper Sensor (Upper) |
| Парткод: | 046-12501-004 |
| Деталь: | *Cover Paper Sensor (Lower) |
| Парткод: | 046-12502-000 |
| Деталь: | *Sensor OF-11T-N23 (Lower) |
| Парткод: | 444-32006-007 |
| Деталь: | *Junction Harness Paper Sensor (Lower) |
| Парткод: | 046-12704-002 |
| Деталь: | *Wire Harness Paper Sensor (Lower) |
| Парткод: | 046-12703-006 |
| Деталь: | STEPPED SCREW F4X2.2 M3X4 |
| Парткод: | 635-17423-108 |
| Деталь: | Plate Pressure Spring |
| Парткод: | 023-15124-100 |
| Деталь: | Pressure Spring LL |
| Парткод: | 023-15035-204 |
| Деталь: | Noise Reduction Pressure Spring |
| Парткод: | 023-15019-004 |
| Деталь: | Bracket Base Guide Roller Shaft |
| Парткод: | 023-15062-007 |
| Деталь: | Base Bracket Guide Roller Release |
| Парткод: | 023-15154-408 |
| Деталь: | Spring Guide Roller Release |
| Парткод: | 023-15063-208 |
| Деталь: | Guide Roller Lever |
| Парткод: | 023-15061-000 |
| Деталь: | Lever Plate Sector Gear |
| Парткод: | 023-15058-301 |
| Деталь: | Sector Gear |
| Парткод: | 023-15059-006 |
| Деталь: | Spring Sector Gear |
| Парткод: | 023-15060-306 |
| Деталь: | Hook Bracket Spring Sector Gear |
| Парткод: | 023-15155-200 |
| Деталь: | Bracket 1st Transmission |
| Парткод: | 023-15041-409 |
| Деталь: | Gear M1X41+M1X29 |
| Парткод: | 612-82407-107 |
| Деталь: | GEAR M1X28X8 |
| Парткод: | 612-12208-107 |
| Деталь: | Separation Fan Assy II(1-5) |
| Парткод: | 046-75012-070 |
| Деталь: | Air Pump Assy(17-29) |
| Парткод: | 023-75077-151 |
| Деталь: | *Base Separation Fan |
| Парткод: | 023-21017-200 |
| Деталь: | *Fan E1033H24BYAZ-33 |
| Парткод: | 490-41014-007 |
| Деталь: | *Air Nozzle |
| Парткод: | 046-21018-006 |
| Деталь: | *light Absorber Strip(35X28) |
| Парткод: | 023-21393-007 |
| Деталь: | *Wire Harness Separation Fan |
| Парткод: | 046-21800-103 |
| Деталь: | Air Hose Separator |
| Парткод: | 023-21016-106 |
| Деталь: | Power Band T10 |
| Парткод: | 665-02901-100 |
| Деталь: | SEPARATOR |
| Парткод: | 023-21002-008 |
| Деталь: | SHAFT SEPARATOR |
| Парткод: | 023-21006-100 |
| Деталь: | Release Lever Separator |
| Парткод: | 023-21007-000 |
| Деталь: | Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | ADJUSTMENT PLATE |
| Парткод: | 023-21003-004 |
| Деталь: | Stopper Separator |
| Парткод: | 023-21005-007 |
| Деталь: | Stepped Screw 6X1.7 M4X4 |
| Парткод: | 635-17614-205 |
| Деталь: | Fixing Pin |
| Парткод: | 020-13114-300 |
| Деталь: | Spacer Cylinder Base Air Pump |
| Парткод: | 023-21027-000 |
| Деталь: | *Cylinder Base Bracket Air pump |
| Парткод: | 023-21013-409 |
| Деталь: | *Gear M1X80X10 |
| Парткод: | 612-03106-105 |
| Деталь: | *Timing Plate Air Pump |
| Парткод: | 023-21023-200 |
| Деталь: | *Arm Air Pump |
| Парткод: | 019-13511-200 |
| Деталь: | *Cylinder Air Pump |
| Парткод: | 023-21021-002 |
| Деталь: | *Cylinder Valve ll Air Pump |
| Парткод: | 019-13517-004 |
| Деталь: | *Cylinder Valve Sheet Air Pump |
| Парткод: | 019-13518-000 |
| Деталь: | *Piston Head ll Air Pump |
| Парткод: | 019-13516-105 |
| Деталь: | *O Ring 34-3.6 |
| Парткод: | 640-67340-009 |
| Деталь: | *Arm Shaft Air Pump |
| Парткод: | 019-13512-002 |
| Деталь: | *Adj. Valve Air blow |
| Парткод: | 023-21011-104 |
| Деталь: | *Spring Adj. Valve Air Blow |
| Парткод: | 023-21010-000 |
| Деталь: | *Adj. Plate Air blow |
| Парткод: | 023-21009-002 |
| Деталь: | RELEASE PLATE |
| Парткод: | 023-21001-001 |
| Деталь: | Nylon Clip NK-10N |
| Парткод: | 665-02021-606 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 046-53004-007 |
| Деталь: | Clamp Plate Assy(20-32) |
| Парткод: | 023-75112-259 |
| Деталь: | Drum Body L A3 SU |
| Парткод: | 023-75061-255 |
| Деталь: | Drum Body L Ledger SU |
| Парткод: | 023-75063-258 |
| Деталь: | Drum Body L A4 SU |
| Парткод: | 023-75062-251 |
| Деталь: | Drum Body B4 ML SU |
| Парткод: | 023-75067-253 |
| Деталь: | Drum Body A4W |
| Парткод: | 023-75068-055 |
| Деталь: | Drum Body B4LL |
| Парткод: | 023-75064-254 |
| Деталь: | DRUM BODY LG |
| Парткод: | 023-75066-257 |
| Деталь: | Drum Body A4TLL |
| Парткод: | 023-75065-153 |
| Деталь: | Screen Assy L |
| Парткод: | 023-17297-141 |
| Деталь: | Light Absorber Strip(328X18) |
| Парткод: | 023-17004-306 |
| Деталь: | Hanger Plate Screen |
| Парткод: | 023-17003-008 |
| Деталь: | Ink Blocking Sheet A3 |
| Парткод: | 023-17345-006 |
| Деталь: | Ink Blocking Sheet B4 |
| Парткод: | 023-17189-101 |
| Деталь: | Ink Blocking Sheet B4LL |
| Парткод: | 023-17409-306 |
| Деталь: | Ink Blocking Sheet A4 |
| Парткод: | 023-17190-100 |
| Деталь: | Ink Blocking Sheet A4LL |
| Парткод: | 023-17412-102 |
| Деталь: | Seal Tape A3 |
| Парткод: | 023-17256-046 |
| Деталь: | Seal Tape B4 |
| Парткод: | 023-17257-042 |
| Деталь: | Seal Tape B4LL |
| Парткод: | 023-17415-004 |
| Деталь: | Seal Tape A4 |
| Парткод: | 023-17258-006 |
| Деталь: | DRUM SEAL |
| Парткод: | 023-17007-003 |
| Деталь: | Flange Front |
| Парткод: | 023-17012-104 |
| Деталь: | Weight Balance F A |
| Парткод: | 023-17014-204 |
| Деталь: | Weight Balance F B |
| Парткод: | 023-17262-208 |
| Деталь: | Flange Handle |
| Парткод: | 023-17149-002 |
| Деталь: | B Position Marking Sticker |
| Парткод: | 023-17307-007 |
| Деталь: | Flange Gear Drum |
| Парткод: | 023-17009-006 |
| Деталь: | Drum Flange Rear |
| Парткод: | 023-17006-201 |
| Деталь: | Weight Balance R A |
| Парткод: | 023-17011-205 |
| Деталь: | Weight Balance R B |
| Парткод: | 023-17261-201 |
| Деталь: | Metal Stopper Drum |
| Парткод: | 023-17263-000 |
| Деталь: | Drum Shaft Joint |
| Парткод: | 023-17008-107 |
| Деталь: | Boss A Position Compensation |
| Парткод: | 023-17010-004 |
| Деталь: | *Clamp Plate Base |
| Парткод: | 023-17067-308 |
| Деталь: | *Clamp Magnet |
| Парткод: | 023-17181-100 |
| Деталь: | *Friction Sheet |
| Парткод: | 023-17180-007 |
| Деталь: | *Spring Clamp Plate Base |
| Парткод: | 023-17251-001 |
| Деталь: | *Clamp Plate |
| Парткод: | 023-17068-207 |
| Деталь: | *Release Lever Clamp Plate |
| Парткод: | 023-17191-203 |
| Деталь: | *Collar D12 Clamp |
| Парткод: | 023-17069-009 |
| Деталь: | *Spring Clamp Plate Close |
| Парткод: | 023-17275-008 |
| Деталь: | *Projection Plate |
| Парткод: | 023-17071-208 |
| Деталь: | *Spring Projection Plate |
| Парткод: | 023-17073-103 |
| Деталь: | *Master Release Arm Clamp |
| Парткод: | 023-17187-001 |
| Деталь: | *Stepped Screw F6X5 M3X5 |
| Парткод: | 635-10008-105 |
| Деталь: | *Sheet Clamp Plate Base |
| Парткод: | 023-17342-007 |
| Деталь: | Light Absorber Strip(65X18) |
| Парткод: | 023-17344-204 |
| Деталь: | Tape Drum Body Joint 335X30 |
| Парткод: | 023-17424-003 |
| Деталь: | Panel Unit 300E(1-18,43-45) |
| Парткод: | 046-75045-050 |
| Деталь: | Panel Unit 370E(1-18,43-45) |
| Парткод: | 046-75047-052 |
| Деталь: | Panel Unit 370A(1-18,43-45) |
| Парткод: | 046-75048-059 |
| Деталь: | Panel Unit 390U(1-18,43-45) |
| Парткод: | 046-75049-055 |
| Деталь: | Panel Unit EV35(1-18,43-45) |
| Парткод: | 046-75050-053 |
| Деталь: | Panel Unit EV37(1-18,43-45) |
| Парткод: | 046-75051-050 |
| Деталь: | Panel Unit 330A(1-18,43-45) |
| Парткод: | 046-75057-058 |
| Деталь: | *Frame Panel |
| Парткод: | 023-37002-202 |
| Деталь: | Panel Mode Key Pic |
| Парткод: | 023-37061-004 |
| Деталь: | Panel Mode Key Eng |
| Парткод: | 023-37015-002 |
| Деталь: | Panel Mode Key Ch |
| Парткод: | 023-37062-000 |
| Деталь: | Print Control RZ3 Pic/mm |
| Парткод: | 023-37067-100 |
| Деталь: | Print Control RZ3 Eng/mm |
| Парткод: | 023-37066-103 |
| Деталь: | Print Control RZ3 Ch/mm |
| Парткод: | 023-37068-106 |
| Деталь: | Print Control RZ3 Eng/inch |
| Парткод: | 023-37016-106 |
| Деталь: | *Plate Main Panel (Pic) |
| Парткод: | 046-37018-103 |
| Деталь: | *Plate Main Panel (En) |
| Парткод: | 046-37017-000 |
| Деталь: | *Plate Main Panel (Ch) |
| Парткод: | 046-37019-002 |
| Деталь: | Sub Panel RZ370EP/UP |
| Парткод: | 023-37082-001 |
| Деталь: | Sub Panel RZ300EP |
| Парткод: | 023-37085-108 |
| Деталь: | Sub Panel RZ370AW/AN |
| Парткод: | 023-37081-005 |
| Деталь: | Sub Panel RZ390UI |
| Парткод: | 023-37017-005 |
| Деталь: | Sub Panel RZ310UI |
| Парткод: | 023-37084-004 |
| Деталь: | Sub Panel RZ370C |
| Парткод: | 023-37083-008 |
| Деталь: | Sub Panel RZ3460C |
| Парткод: | 023-37098-005 |
| Деталь: | Sub Panel RZ330AW |
| Парткод: | 023-37097-009 |
| Деталь: | *Cover Sub-Panel |
| Парткод: | 023-37013-107 |
| Деталь: | *Wake-Up Key |
| Парткод: | 023-37056-108 |
| Деталь: | *Reset Key Pic. |
| Парткод: | 023-37047-001 |
| Деталь: | *Reset Key Eng |
| Парткод: | 023-37046-005 |
| Деталь: | *Reset Key Ch |
| Парткод: | 023-37048-008 |
| Деталь: | *Stop Key Pic. |
| Парткод: | 023-37037-006 |
| Деталь: | *Stop Key Eng |
| Парткод: | 023-37036-000 |
| Деталь: | *Stop Key Ch |
| Парткод: | 023-37038-002 |
| Деталь: | *Print Mode Key |
| Парткод: | 023-37050-100 |
| Деталь: | *Test Print Key Pic. |
| Парткод: | 023-37042-000 |
| Деталь: | *Test Print Key Eng |
| Парткод: | 023-37041-003 |
| Деталь: | *Test Print Key Ch |
| Парткод: | 023-37043-006 |
| Деталь: | *Start Key Pic. |
| Парткод: | 023-37032-004 |
| Деталь: | *Start Key Eng |
| Парткод: | 023-37031-008 |
| Деталь: | *Start Key Ch. |
| Парткод: | 023-37033-108 |
| Деталь: | *Numeric Key |
| Парткод: | 023-37040-007 |
| Деталь: | *Print Control Key RZ3 |
| Парткод: | 023-37051-009 |
| Деталь: | *Protection Shield |
| Парткод: | 023-37011-104 |
| Деталь: | *Led-Pnl-Ctl-Pcb |
| Парткод: | 046-37001-006 |
| Деталь: | *Main-SW-PCB |
| Парткод: | 023-37022-300 |
| Деталь: | *Sub-SW-PCB |
| Парткод: | 023-37023-307 |
| Деталь: | Bracket Front Cover SW |
| Парткод: | 023-34051-105 |
| Деталь: | MAGNET CATCH SM50-P |
| Парткод: | 660-00002-004 |
| Деталь: | Bracket Sensor Front Cover |
| Парткод: | 023-34053-205 |
| Деталь: | SENSOR LG285D1 |
| Парткод: | 444-30010-007 |
| Деталь: | Wire Harness Lower F (G) |
| Парткод: | 046-53015-009 |
| Деталь: | Bracket Counter |
| Парткод: | 023-50022-000 |
| Деталь: | COUNTER |
| Парткод: | 492-00001-108 |
| Деталь: | Wire Harness Main Power SW |
| Парткод: | 046-50013-005 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | SB-6025 |
| Парткод: | 665-04055-001 |
| Деталь: | Edging Saddle LES-1017 |
| Парткод: | 665-00309-009 |
| Деталь: | Wire Harness Panel.M-Rmv L/LL |
| Парткод: | 046-53019-101 |
| Деталь: | Wire Harness Lower R (G) |
| Парткод: | 046-53016-005 |
| Деталь: | *Grounding Plate A Panel |
| Парткод: | 023-37027-000 |
| Деталь: | *Grounding Plate B Panel |
| Парткод: | 023-37028-007 |
| Деталь: | *Grounding Plate C Panel |
| Парткод: | 023-37029-003 |
| Деталь: | Pressure Control Assy(1-9) |
| Парткод: | 023-75076-058 |
| Деталь: | *Base Bracket Pressure Control |
| Парткод: | 023-15023-109 |
| Деталь: | *Cover Plate Pressure Control |
| Парткод: | 023-15027-007 |
| Деталь: | *Worm Gear Pressure Control |
| Парткод: | 023-15030-008 |
| Деталь: | *Worm Shaft Pressure Control |
| Парткод: | 023-15029-107 |
| Деталь: | *Gear Pressure Control |
| Парткод: | 023-15028-003 |
| Деталь: | *Gear Shaft Pressure Control |
| Парткод: | 023-15025-101 |
| Деталь: | *Motor KH42JM2B173 |
| Парткод: | 490-31010-003 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Bracket HP sensor Pressure Control |
| Парткод: | 023-15032-000 |
| Деталь: | GEAR M1X28X8 |
| Парткод: | 612-12208-107 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 046-53004-007 |
| Деталь: | Gear Wheel Pressure Control |
| Парткод: | 023-15031-101 |
| Деталь: | Rotation Plate Pressure Control |
| Парткод: | 023-15033-104 |
| Деталь: | Pressure Spring H25 |
| Парткод: | 045-15018-200 |
| Деталь: | Noise Reduction Pressure Spring |
| Парткод: | 023-15019-004 |
| Деталь: | Bracket Base Guide Roller Shaft |
| Парткод: | 023-15062-007 |
| Деталь: | Base Bracket Guide Roller Release |
| Парткод: | 023-15154-408 |
| Деталь: | Spring Guide Roller Release |
| Парткод: | 023-15063-208 |
| Деталь: | Guide Roller Lever |
| Парткод: | 023-15061-000 |
| Деталь: | Lever Plate Sector Gear |
| Парткод: | 023-15058-301 |
| Деталь: | Sector Gear |
| Парткод: | 023-15059-006 |
| Деталь: | Spring Sector Gear |
| Парткод: | 023-15060-306 |
| Деталь: | Hook Bracket Spring Sector Gear |
| Парткод: | 023-15155-200 |
| Деталь: | Bracket 1st Transmission |
| Парткод: | 023-15041-409 |
| Деталь: | Gear M1X41+M1X29 |
| Парткод: | 612-82407-107 |
| Деталь: | P.-Rcv.-T Unit(1-23) |
| Парткод: | 023-75095-150 |
| Деталь: | *Flap P.-Rcv.T. Assy(11-14) |
| Парткод: | 023-75147-052 |
| Деталь: | *Back Stopper P.-RCV.-T |
| Парткод: | 023-21608-003 |
| Деталь: | *Fence Cushion |
| Парткод: | 018-33151-408 |
| Деталь: | *Shaft Fence |
| Парткод: | 023-21634-101 |
| Деталь: | *Slide Base P.Rcv.-T. |
| Парткод: | 023-21635-108 |
| Деталь: | *Slide Plate(Lower) P.-Rcv.-T. |
| Парткод: | 023-21637-003 |
| Деталь: | *Plate Spring P.-Rcv.-T |
| Парткод: | 023-21638-107 |
| Деталь: | *Slide Plate(Upper) P.-Rcv.-T. |
| Парткод: | 023-21636-147 |
| Деталь: | *Lever Paper Guide P.-Rcv.-T. |
| Парткод: | 023-21621-000 |
| Деталь: | *Paper Guide R P.-Rcv.-T. |
| Парткод: | 023-21607-201 |
| Деталь: | *Paper Guide F P.-Rcv.-T. |
| Парткод: | 023-21606-205 |
| Деталь: | **Flap Cover P.-Rcv.-T. |
| Парткод: | 023-21614-003 |
| Деталь: | **Holder Flap P.Rcv.-T |
| Парткод: | 023-21615-204 |
| Деталь: | **Flap P.-Rcv.-T |
| Парткод: | 023-21612-108 |
| Деталь: | **Balancer Flap P.-RCV.-T. |
| Парткод: | 023-21613-007 |
| Деталь: | *Slide Rail Paper Guide P.-Rcv.-T. |
| Парткод: | 023-21639-006 |
| Деталь: | *Slide Rail Paper Stopper P.-Rcv.-T. |
| Парткод: | 023-21640-004 |
| Деталь: | *Side Frame R P.-Rcv.-T. |
| Парткод: | 023-21603-508 |
| Деталь: | *Side Frame F P.-Rcv.-T. |
| Парткод: | 023-21602-501 |
| Деталь: | *Ground Plate Slide Rail P.Rcv.-T. |
| Парткод: | 023-21633-105 |
| Деталь: | *Paper Receiving Tray |
| Парткод: | 023-21601-106 |
| Деталь: | *Seal P.-Pcv.-T:Folding Pic |
| Парткод: | 023-21802-004 |
| Деталь: | *Bracket Magnet Catch P.-Rcv.-T. |
| Парткод: | 023-21643-003 |
| Деталь: | *Magnet Catch SM50-P |
| Парткод: | 660-00002-004 |
| Деталь: | *Load Motor Assy(27-30) |
| Парткод: | 023-75144-150 |
| Деталь: | *Master Guide Assy (31-39) |
| Парткод: | 023-75140-058 |
| Деталь: | *Master Guide Assy MLB4(31-39) |
| Парткод: | 023-75142-050 |
| Деталь: | *Master Guide Assy II(31-39) |
| Парткод: | 023-75141-054 |
| Деталь: | *Shaft Holder Right |
| Парткод: | 046-28002-008 |
| Деталь: | *Shaft Holder Left |
| Парткод: | 046-28003-004 |
| Деталь: | *Shaft Drawer Connector M.-M Unit |
| Парткод: | 023-28076-007 |
| Деталь: | *Hook Shaft M.-M Unit |
| Парткод: | 023-28148-008 |
| Деталь: | *Upper Stay M.-M Unit |
| Парткод: | 023-28014-109 |
| Деталь: | *Guide Block M.-M. Unit Mount |
| Парткод: | 023-28367-001 |
| Деталь: | *M. Loading Roller A3 |
| Парткод: | 023-28046-000 |
| Деталь: | *M. Loading Roller B4 |
| Парткод: | 023-28285-005 |
| Деталь: | *Lock Ring 4 |
| Парткод: | 023-17197-007 |
| Деталь: | *Gear M0.8X13X5 |
| Парткод: | 612-10103-006 |
| Деталь: | *Shaft M. Loading Roller |
| Парткод: | 023-28044-008 |
| Деталь: | *Bracket De-Elect. Brush M Loading |
| Парткод: | 023-28405-108 |
| Деталь: | *De-Electricity Brush M Loading |
| Парткод: | 023-28415-006 |
| Деталь: | *Load Roller A3 |
| Парткод: | 046-28015-002 |
| Деталь: | *Load Roller B4 |
| Парткод: | 046-28022-009 |
| Деталь: | *Metal F8x10x3 11.2x0.6 |
| Парткод: | 607-10005-004 |
| Деталь: | *Gear M0.8X16X5 |
| Парткод: | 612-10104-002 |
| Деталь: | *FULCRUM PLATE MASTER STOCKER |
| Парткод: | 023-28140-104 |
| Деталь: | *Damper 2G50-C-10HG |
| Парткод: | 610-00022-003 |
| Деталь: | *Bracket Gear Shaft M Loading |
| Парткод: | 023-28376-108 |
| Деталь: | *Gear M0.8X34X4 |
| Парткод: | 612-10106-005 |
| Деталь: | *Gear M0.8X16X4 |
| Парткод: | 612-10105-009 |
| Деталь: | *Bracket Set sensor M.-M Upper |
| Парткод: | 023-28214-108 |
| Деталь: | *SENSOR ON-171-A8 |
| Парткод: | 444-33003-109 |
| Деталь: | *Wire Harness M.Pos.Sensor |
| Парткод: | 046-28026-004 |
| Деталь: | *Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | *Wire Harness M.-M Unit |
| Парткод: | 023-28239-208 |
| Деталь: | **Bracket Load Pulse Motor |
| Парткод: | 023-28196-002 |
| Деталь: | **Motor PM42L-048-ZVN6 |
| Парткод: | 490-33015-002 |
| Деталь: | **Gear Mx0.5X89+M0.8X34 |
| Парткод: | 612-80019-002 |
| Деталь: | **Gear M0.8X36+M0.8X18 |
| Парткод: | 612-80018-006 |
| Деталь: | **Metal F6X8X4 10X1 |
| Парткод: | 607-10006-000 |
| Деталь: | **Cutter Guide Upper A3 |
| Парткод: | 023-28057-002 |
| Деталь: | **Cutter Guide Upper B4R |
| Парткод: | 023-28436-003 |
| Деталь: | **Cutter Guide Upper B4 |
| Парткод: | 023-28265-209 |
| Деталь: | **Cutter Guide Lower A3 |
| Парткод: | 023-28058-106 |
| Деталь: | **Cutter Guide Lower B4R |
| Парткод: | 023-28437-107 |
| Деталь: | **Cutter Guide Lower B4 |
| Парткод: | 023-28263-109 |
| Деталь: | **Shaft Stoker roller Upper A3 |
| Парткод: | 023-28184-004 |
| Деталь: | **Shaft Stoker roller Upper B4 |
| Парткод: | 023-28272-000 |
| Деталь: | **M Transfer Roller Wide Width |
| Парткод: | 023-28190-101 |
| Деталь: | **M Transfer Roller Middle width |
| Парткод: | 023-28191-108 |
| Деталь: | **Shaft Load Roller Upper A3 |
| Парткод: | 023-28093-009 |
| Деталь: | **Shaft Load Roller Upper B4 |
| Парткод: | 023-28286-001 |
| Деталь: | **M Transfer Roller Short Width |
| Парткод: | 023-28192-104 |
| Деталь: | **Guide Master Loading |
| Парткод: | 023-28340-006 |
| Деталь: | *Sensor E-3674 |
| Парткод: | 444-39000-004 |
| Деталь: | *Cutter Unit(rotary) |
| Парткод: | 023-28421-103 |
| Деталь: | *Cutter Unit(Shuttle) |
| Парткод: | 023-28422-401 |
| Деталь: | *Master Guide Plate A A3(D23) |
| Парткод: | 023-28327-107 |
| Деталь: | *Master Guide Plate A B4(D23) |
| Парткод: | 023-28310-000 |
| Деталь: | *Master Guide Plate A (D13) |
| Парткод: | 023-28287-202 |
| Деталь: | *Seal Pos. Leading Edge Of Master Pic |
| Парткод: | 023-28946-001 |
| Деталь: | *Stepped Screw F5X3 M3X3 |
| Парткод: | 635-10007-001 |
| Деталь: | *Cutter Cover |
| Парткод: | 046-28043-006 |
| Деталь: | *Cutter Cover 2 |
| Парткод: | 046-28044-002 |
| Деталь: | *Cover Master Pos. Sensor |
| Парткод: | 023-28053-104 |
| Деталь: | *Master Set Guide Bar |
| Парткод: | 023-28317-004 |
| Деталь: | *Master Set Guide Bar B4 |
| Парткод: | 023-28379-000 |
| Деталь: | *Guide plate B Master Set Guide Bar |
| Парткод: | 023-28409-103 |
| Деталь: | *Guide plate A Master Set Guide Bar |
| Парткод: | 023-28280-100 |
| Деталь: | *Spring Safety SW |
| Парткод: | 046-28049-004 |
| Деталь: | *Bracket SW M.-M. |
| Парткод: | 046-28048-008 |
| Деталь: | PANEL UNIT |
| Парткод: | 046-75052-056 |
| Деталь: | PANEL UNIT |
| Парткод: | 046-75053-052 |
| Деталь: | PANEL UNIT |
| Парткод: | 046-75055-055 |
| Деталь: | *Frame Panel |
| Парткод: | 023-37101-405 |
| Деталь: | *Sheet |
| Парткод: | 023-37061-004 |
| Деталь: | *Sheet |
| Парткод: | 023-37015-002 |
| Деталь: | *Sheet |
| Парткод: | 023-37062-000 |
| Деталь: | *Sheet |
| Парткод: | 023-37118-006 |
| Деталь: | *Sheet |
| Парткод: | 023-37117-000 |
| Деталь: | *Sheet |
| Парткод: | 023-37119-002 |
| Деталь: | *Numeric Display Cover |
| Парткод: | 023-37103-009 |
| Деталь: | *Wake-Up Key |
| Парткод: | 023-37056-108 |
| Деталь: | *Reset Key |
| Парткод: | 023-37047-001 |
| Деталь: | *Reset Key |
| Парткод: | 023-37046-005 |
| Деталь: | *Reset Key |
| Парткод: | 023-37048-008 |
| Деталь: | *Stop Key |
| Парткод: | 023-37037-006 |
| Деталь: | *Stop Key |
| Парткод: | 023-37036-000 |
| Деталь: | *Stop Key |
| Парткод: | 023-37038-002 |
| Деталь: | *Print Mode Key |
| Парткод: | 023-37050-100 |
| Деталь: | *Test Print Key |
| Парткод: | 023-37042-000 |
| Деталь: | *Test Print Key |
| Парткод: | 023-37041-003 |
| Деталь: | *Test Print Key |
| Парткод: | 023-37043-006 |
| Деталь: | *Start Key |
| Парткод: | 023-37032-004 |
| Деталь: | *Start Key |
| Парткод: | 023-37031-008 |
| Деталь: | *Start Key |
| Парткод: | 023-37033-108 |
| Деталь: | *Print Control Key |
| Парткод: | 023-37107-004 |
| Деталь: | *Numeric Key |
| Парткод: | 023-37040-007 |
| Деталь: | *Shield Mylar Sheet A |
| Парткод: | 023-37128-001 |
| Деталь: | *ML-SW-PCB |
| Парткод: | 023-37136-802 |
| Деталь: | *Grounding Plate |
| Парткод: | 046-37010-005 |
| Деталь: | *Touch Panel Cover |
| Парткод: | 023-37102-100 |
| Деталь: | *Display Mode Key |
| Парткод: | 023-37110-005 |
| Деталь: | *G890Display Mode Key |
| Парткод: | 023-37109-007 |
| Деталь: | *Display Mode Key |
| Парткод: | 023-37111-001 |
| Деталь: | *Shield Mylar Sheet B |
| Парткод: | 023-37129-008 |
| Деталь: | *MODE-KEY-PCB |
| Парткод: | 023-37137-205 |
| Деталь: | *LCD Control Unit |
| Парткод: | 023-43799-104 |
| Деталь: | BRACKET |
| Парткод: | 023-34051-105 |
| Деталь: | MAGNET CATCH |
| Парткод: | 660-00002-004 |
| Деталь: | BRACKET |
| Парткод: | 023-34053-205 |
| Деталь: | SENSOR |
| Парткод: | 444-30010-007 |
| Деталь: | WIRE HARNESS |
| Парткод: | 046-53015-009 |
| Деталь: | BRACKET |
| Парткод: | 023-50022-000 |
| Деталь: | COUNTER |
| Парткод: | 492-00001-108 |
| Деталь: | GUIDE |
| Парткод: | 023-50013-005 |
| Деталь: | WIRE SADDLE |
| Парткод: | 665-02044-002 |
| Деталь: | SB-6025 |
| Парткод: | 665-04055-001 |
| Деталь: | EDGING SADDLE |
| Парткод: | 665-00309-009 |
| Деталь: | USB Inner Cable |
| Парткод: | 046-53013-006 |
| Деталь: | BRACKET |
| Парткод: | 046-50012-009 |
| Деталь: | WIRE HARNESS |
| Парткод: | 046-53007-103 |
| Деталь: | WIRE HARNESS |
| Парткод: | 046-53016-005 |
| Деталь: | Ver. Print Pos. Base Assy(1-19) |
| Парткод: | 023-75094-056 |
| Деталь: | *Print Positioning Base |
| Парткод: | 023-15034-208 |
| Деталь: | *Cover Paper Feed Drive |
| Парткод: | 023-15115-100 |
| Деталь: | *Bracket Timing Roller |
| Парткод: | 023-15078-000 |
| Деталь: | *Arm Front Ver. Print Pos. |
| Парткод: | 023-15104-400 |
| Деталь: | *Gear M1X140X8 |
| Парткод: | 612-10016-103 |
| Деталь: | *Arm Rear Ver. Print Pos. |
| Парткод: | 023-15105-008 |
| Деталь: | *Gear M1X42+M1X28 |
| Парткод: | 612-80017-107 |
| Деталь: | *Sector Gear Ver. Print Position |
| Парткод: | 023-15068-005 |
| Деталь: | *Cover Ver. Print pos. Planet Gear |
| Парткод: | 023-15103-005 |
| Деталь: | *Gear M1X126X7.5 |
| Парткод: | 612-10014-003 |
| Деталь: | *Gear Base Block Vertical Gear |
| Парткод: | 023-15098-206 |
| Деталь: | *Timing Cam |
| Парткод: | 023-15056-201 |
| Деталь: | *Sector Cam |
| Парткод: | 023-15055-108 |
| Деталь: | *Idler Spring Vertical |
| Парткод: | 023-15070-000 |
| Деталь: | *Gear M0.8X36X10 |
| Парткод: | 612-10013-007 |
| Деталь: | *Gear M0.8X35+M0.8X15 |
| Парткод: | 612-81303-006 |
| Деталь: | *Motor PM42L-048-ZVN5 |
| Парткод: | 490-33016-106 |
| Деталь: | *Bracket Vertical Centering Sensor |
| Парткод: | 023-15116-000 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 046-53008-002 |
| Деталь: | Wire Harness Paper Feed Rear |
| Парткод: | 046-53005-003 |
| Деталь: | Bracket Ver. Print Pos. Base |
| Парткод: | 023-15117-006 |
| Деталь: | Cover Stay Paper Feed Drive |
| Парткод: | 023-15072-002 |
| Деталь: | Junction Harness Vertical Pos.Motor |
| Парткод: | 046-53012-000 |
| Деталь: | *Side Frame F1 M.-Rmv |
| Парткод: | 046-24002-003 |
| Деталь: | *Side Frame R1 M.-Rmv. |
| Парткод: | 046-24009-008 |
| Деталь: | *Stay A M.-Rmv. |
| Парткод: | 046-24016-004 |
| Деталь: | *Stay B M.-Rmv. |
| Парткод: | 046-24017-000 |
| Деталь: | *Bracket M.-Rmv. Unit |
| Парткод: | 046-24086-002 |
| Деталь: | *M Compression Plate |
| Парткод: | 046-24099-007 |
| Деталь: | *Metal F10X15/14X6 18X2 |
| Парткод: | 607-16001-000 |
| Деталь: | *GEAR M1X71X14 |
| Парткод: | 612-10040-004 |
| Деталь: | *Bracket Gear A |
| Парткод: | 024-24138-005 |
| Деталь: | *Bracket Gear B |
| Парткод: | 024-24139-001 |
| Деталь: | *Master Removal Roller |
| Парткод: | 046-24005-002 |
| Деталь: | *Hook Shaft M Removal Roller Lower |
| Парткод: | 023-24124-007 |
| Деталь: | *Holding Plate F M.-Rmv. |
| Парткод: | 046-24125-008 |
| Деталь: | *Guide Stay M.-Rmv. |
| Парткод: | 046-24152-005 |
| Деталь: | *Guide Plate M.-Rmv. |
| Парткод: | 046-24151-009 |
| Деталь: | *Holding Plate R M.-Rmv. |
| Парткод: | 046-24127-000 |
| Деталь: | *Stepped Screw F5X10.8 M3X3 |
| Парткод: | 635-10006-005 |
| Деталь: | *Roller Hook M.-Rmv. |
| Парткод: | 023-24126-000 |
| Деталь: | *Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | *Gear m1.25X16+m1.25X14 |
| Парткод: | 612-80025-002 |
| Деталь: | *Guide Plate Disposal Box |
| Парткод: | 046-24119-008 |
| Деталь: | *Manual Compression Lever |
| Парткод: | 023-24120-001 |
| Деталь: | *Link Plate |
| Парткод: | 024-25065-109 |
| Деталь: | *Release Lever 1 M.-Rmv. |
| Парткод: | 046-24113-000 |
| Деталь: | *Knob Release Lever M.-Rmv. |
| Парткод: | 023-24117-000 |
| Деталь: | *Bracket FG Sensor 1 M.-Rmv. |
| Парткод: | 046-24075-000 |
| Деталь: | *Guide Plate R Disposal Box |
| Парткод: | 046-24166-006 |
| Деталь: | *Bracket Set Sensor Disposal Box |
| Парткод: | 046-24015-008 |
| Деталь: | *Suction Motor Ccwrs-55PH |
| Парткод: | 023-74002-050 |
| Деталь: | *Metal Slit Motor |
| Парткод: | 023-21342-305 |
| Деталь: | *Pulley Gear 0.8X31+53S2M |
| Парткод: | 613-11300-007 |
| Деталь: | *Belt 40-S2M-290 |
| Парткод: | 621-00001-000 |
| Деталь: | *Bracket M.-Rmv. Gear |
| Парткод: | 046-24001-007 |
| Деталь: | *Gear m0.8X61+m1.25X12 |
| Парткод: | 612-80024-006 |
| Деталь: | *Motor Assy (CWRS-445PA) |
| Парткод: | 023-74001-054 |
| Деталь: | *Bracket Motor M Compression |
| Парткод: | 046-24092-002 |
| Деталь: | *Gear M0.8X35+M0.8X15 |
| Парткод: | 612-81303-006 |
| Деталь: | *Bracket FG Sensor M Compression |
| Парткод: | 046-24074-004 |
| Деталь: | *Bracket 1 M Compression Gear |
| Парткод: | 046-24097-004 |
| Деталь: | *Bracket Locking Boss |
| Парткод: | 046-24012-009 |
| Деталь: | *Gear M1X17+M0.8X61 |
| Парткод: | 612-81602-003 |
| Деталь: | *Gear M0.8X17+M0.8X49 |
| Парткод: | 612-81401-008 |
| Деталь: | *Gear M0.8X15X7 |
| Парткод: | 612-11103-000 |
| Деталь: | *Set Plate Safety SW M.-Rmv. |
| Парткод: | 046-24135-003 |
| Деталь: | *Stepped Screw F5X1.5 M3X3 |
| Парткод: | 635-18513-003 |
| Деталь: | *Spring Clamp Cam |
| Парткод: | 023-26020-004 |
| Деталь: | *Safety SW Assy M.-RMV. |
| Парткод: | 023-53031-000 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Edging Saddle LES-1010 |
| Парткод: | 665-00312-000 |
| Деталь: | *Wire Harness U M.-Rmv. |
| Парткод: | 046-24200-000 |
| Деталь: | Wire Harness Elevator Motor |
| Парткод: | 023-12602-108 |
| Деталь: | Wire Harness M-Rmv/Panel |
| Парткод: | 046-53007-006 |
| Деталь: | Wire Harness Safety SW M.-Rmv. |
| Парткод: | 046-53009-009 |
| Деталь: | *Write Roller Assy II A3(25-26) |
| Парткод: | 046-75016-076 |
| Деталь: | *Write Roller Assy II B4(25-26) |
| Парткод: | 046-75017-072 |
| Деталь: | *Write Roller Assy II D13-B4(25-26) |
| Парткод: | 046-75036-077 |
| Деталь: | *Master Roll Holder Assy A3(56-68) |
| Парткод: | 023-75137-154 |
| Деталь: | *Master Roll Holder Assy B4(56-68) |
| Парткод: | 023-75138-150 |
| Деталь: | *Master Roll Holder Assy A4(56-68) |
| Парткод: | 023-75139-157 |
| Деталь: | *Rear Frame M.-M Unit |
| Парткод: | 023-28092-207 |
| Деталь: | *Front Frame M.-M. Unit |
| Парткод: | 023-75165-050 |
| Деталь: | *Shaft Handle M-M |
| Парткод: | 023-28338-001 |
| Деталь: | *Handle M.-M. |
| Парткод: | 023-28070-009 |
| Деталь: | *Guide Handle M.-M. |
| Парткод: | 023-28343-005 |
| Деталь: | *Hook Left Handle M.-M. |
| Парткод: | 023-28206-105 |
| Деталь: | *Hook Right Handle M.-M. |
| Парткод: | 023-28071-102 |
| Деталь: | *Actuator plate M.-M. Set Sensor |
| Парткод: | 023-28207-004 |
| Деталь: | *Spring Hook M-M |
| Парткод: | 023-28072-001 |
| Деталь: | *Handle Stopper M.-M. |
| Парткод: | 023-28336-009 |
| Деталь: | *Stepped Screw F4X2.2 M3X4 |
| Парткод: | 635-17423-000 |
| Деталь: | *Spring Handle M-M |
| Парткод: | 023-28209-007 |
| Деталь: | *Positioning Pin Front M.-M |
| Парткод: | 023-28082-007 |
| Деталь: | *Bottom Stay M.-M Unit |
| Парткод: | 023-28013-200 |
| Деталь: | *Slide Guide 2 M.-M. |
| Парткод: | 023-28251-003 |
| Деталь: | *Reinforcement Plate M.-M. Frame |
| Парткод: | 023-28074-101 |
| Деталь: | *Lower Stay M.-Making |
| Парткод: | 023-28073-008 |
| Деталь: | *Reinforce Plate Lower M.-M. Unit |
| Парткод: | 023-28245-003 |
| Деталь: | *Master Roll Holder Bottom |
| Парткод: | 023-28124-109 |
| Деталь: | *Master Guide Roller |
| Парткод: | 023-28210-005 |
| Деталь: | *Box Stay M.-Making |
| Парткод: | 023-28015-008 |
| Деталь: | *De-Electricity Bar M.-M. A3 |
| Парткод: | 014-15011-004 |
| Деталь: | *Lower Bracket Master End Sensor |
| Парткод: | 023-28417-009 |
| Деталь: | *Sensor (Send) KH0854-00 |
| Парткод: | 444-42029-200 |
| Деталь: | **Write Roller D23-A3 |
| Парткод: | 046-28011-007 |
| Деталь: | **Write Roller D23-B4 |
| Парткод: | 046-28020-006 |
| Деталь: | **Write Roller D13-B4 |
| Парткод: | 046-28029-003 |
| Деталь: | **liner |
| Парткод: | 019-35025-008 |
| Деталь: | *Metal F10X15/14X6 18X2 |
| Парткод: | 607-16001-000 |
| Деталь: | *Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | *Bracket F Write Roller |
| Парткод: | 046-28013-000 |
| Деталь: | *Bracket Front Write Roller D13 |
| Парткод: | 046-28030-001 |
| Деталь: | *Pulley P70-2Gt-5 |
| Парткод: | 611-90012-009 |
| Деталь: | *PULLEY P40-2GT-5 |
| Парткод: | 611-90003-000 |
| Деталь: | *Bracket R Write Roller |
| Парткод: | 046-28012-003 |
| Деталь: | *Bracket Rear Write Roller D13 |
| Парткод: | 046-28031-008 |
| Деталь: | *Support Plate Rear Frame M.-M |
| Парткод: | 023-28378-100 |
| Деталь: | *Stock Roller A3 |
| Парткод: | 046-28014-006 |
| Деталь: | *Stock Roller B4 |
| Парткод: | 046-28021-002 |
| Деталь: | *Metal F6X8X4 10X1 |
| Парткод: | 607-10006-000 |
| Деталь: | *M Set Guide Plate B A3 |
| Парткод: | 023-28114-308 |
| Деталь: | *M Set Guide Plate B B4 |
| Парткод: | 023-28259-306 |
| Деталь: | *M Set Guide Plate B A4 |
| Парткод: | 023-28302-309 |
| Деталь: | *Spring B Front M Set Guide Plate |
| Парткод: | 023-28115-100 |
| Деталь: | *Shaft M Set Guide Plate |
| Парткод: | 023-28036-102 |
| Деталь: | *Master Flange Front(G) |
| Парткод: | 046-28027-000 |
| Деталь: | *RF Module B5J-0171 |
| Парткод: | 444-59008-001 |
| Деталь: | *Module Holder M.-M. |
| Парткод: | 046-28033-000 |
| Деталь: | *Collar Master Holder B4 |
| Парткод: | 023-28357-103 |
| Деталь: | *Collar Master Holder A4 |
| Парткод: | 023-28304-107 |
| Деталь: | *Adjuster Collar Master Holder |
| Парткод: | 023-28439-100 |
| Деталь: | *Spring Collar Master Holder |
| Парткод: | 023-28440-000 |
| Деталь: | *Stopper Rear M.-M Unit |
| Парткод: | 023-28247-103 |
| Деталь: | *Bracket Stopper M Set Guide Plate |
| Парткод: | 023-28396-001 |
| Деталь: | *Shaft Stopper M Set Guide Plate |
| Парткод: | 023-28397-008 |
| Деталь: | *Stopper M Set Guide Plate |
| Парткод: | 023-28398-004 |
| Деталь: | *Stopper Spring M Set Guide Plate |
| Парткод: | 023-28399-000 |
| Деталь: | *Rear Cover M.-M. Unit |
| Парткод: | 023-28377-007 |
| Деталь: | *Stopper Spring M.-M Close |
| Парткод: | 023-28233-005 |
| Деталь: | *Base Bracket Stopper M.-M. Close |
| Парткод: | 023-28232-009 |
| Деталь: | *Stopper M.-M. Close |
| Парткод: | 023-28231-002 |
| Деталь: | *Stepped Screw 6X1.8 M3X4 |
| Парткод: | 635-17613-101 |
| Деталь: | *Lever Master roll Holder |
| Парткод: | 023-28133-000 |
| Деталь: | *Lever Spring Master Roll Holder |
| Парткод: | 023-28135-003 |
| Деталь: | **Fulcrum Plate Master Roll Holder |
| Парткод: | 023-28130-001 |
| Деталь: | **Shaft Master Roll Holder |
| Парткод: | 023-28131-008 |
| Деталь: | **Lever Shaft Master Roll Holder |
| Парткод: | 023-28132-004 |
| Деталь: | **Master Holder Base A3 |
| Парткод: | 023-28371-009 |
| Деталь: | **Master Holder Base B4 |
| Парткод: | 023-28374-008 |
| Деталь: | **Master Holder Base A4 |
| Парткод: | 023-28375-004 |
| Деталь: | **Hook Master Roll Holder |
| Парткод: | 023-28134-007 |
| Деталь: | **Reinforcement Plate Master Holder Base |
| Парткод: | 023-28394-009 |
| Деталь: | **Guide Spring Master Holder |
| Парткод: | 023-28136-000 |
| Деталь: | **Damper Case Master Holder |
| Парткод: | 023-28372-005 |
| Деталь: | **Master Flange Rear |
| Парткод: | 023-28007-005 |
| Деталь: | **Guide Flange Master Holder |
| Парткод: | 019-15255-007 |
| Деталь: | **Damper 2G50-C-10HG |
| Парткод: | 610-00022-003 |
| Деталь: | *Wire Harness RF M.-M. |
| Парткод: | 046-28038-002 |
| Деталь: | Separation Fan Assy II LL(1-5) |
| Парткод: | 046-75032-071 |
| Деталь: | Air Pump Assy(17-29) |
| Парткод: | 023-75077-151 |
| Деталь: | *Base Separation Fan |
| Парткод: | 023-21017-200 |
| Деталь: | *Fan E1033H24BYAZ-33 |
| Парткод: | 490-41014-007 |
| Деталь: | *Air Nozzle A4 |
| Парткод: | 046-21020-000 |
| Деталь: | *light Absorber Strip(35X28) |
| Парткод: | 023-21393-007 |
| Деталь: | *Wire Harness Separation Fan LL |
| Парткод: | 046-21802-106 |
| Деталь: | Air Hose Separator |
| Парткод: | 023-21016-106 |
| Деталь: | Power Band T10 |
| Парткод: | 665-02901-100 |
| Деталь: | SEPARATOR |
| Парткод: | 023-21002-008 |
| Деталь: | SHAFT SEPARATOR |
| Парткод: | 023-21006-100 |
| Деталь: | Release Lever Separator |
| Парткод: | 023-21007-000 |
| Деталь: | Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | ADJUSTMENT PLATE |
| Парткод: | 023-21003-004 |
| Деталь: | Stopper Separator |
| Парткод: | 023-21005-007 |
| Деталь: | Stepped Screw 6X1.7 M4X4 |
| Парткод: | 635-17614-205 |
| Деталь: | Fixing Pin |
| Парткод: | 020-13114-300 |
| Деталь: | Spacer Cylinder Base Air Pump |
| Парткод: | 023-21027-000 |
| Деталь: | *Cylinder Base Bracket Air pump |
| Парткод: | 023-21013-409 |
| Деталь: | *Gear M1X80X10 |
| Парткод: | 612-03106-105 |
| Деталь: | *Timing Plate Air Pump |
| Парткод: | 023-21023-200 |
| Деталь: | *Arm Air Pump |
| Парткод: | 019-13511-200 |
| Деталь: | *Cylinder Air Pump |
| Парткод: | 023-21021-002 |
| Деталь: | *Cylinder Valve ll Air Pump |
| Парткод: | 019-13517-004 |
| Деталь: | *Cylinder Valve Sheet Air Pump |
| Парткод: | 019-13518-000 |
| Деталь: | *Piston Head ll Air Pump |
| Парткод: | 019-13516-105 |
| Деталь: | *O Ring 34-3.6 |
| Парткод: | 640-67340-009 |
| Деталь: | *Arm Shaft Air Pump |
| Парткод: | 019-13512-002 |
| Деталь: | *Adj. Valve Air blow |
| Парткод: | 023-21011-104 |
| Деталь: | *Spring Adj. Valve Air Blow |
| Парткод: | 023-21010-000 |
| Деталь: | *Adj. Plate Air blow |
| Парткод: | 023-21009-002 |
| Деталь: | RELEASE PLATE |
| Парткод: | 023-21001-001 |
| Деталь: | Nylon Clip NK-10N |
| Парткод: | 665-02021-606 |
| Деталь: | Wire Harness Paper Feed Rear LL |
| Парткод: | 046-53017-001 |
| Деталь: | Unit / Stage Cover(1,3-6) |
| Парткод: | 023-75113-158 |
| Деталь: | *Stage Cover |
| Парткод: | 023-30008-000 |
| Деталь: | Stage Pad 2 Stage Cover |
| Парткод: | 023-30075-000 |
| Деталь: | *Frame Stage Cover |
| Парткод: | 023-30007-004 |
| Деталь: | *Original Holder Cover (Upper) Stage Cover |
| Парткод: | 018-16411-200 |
| Деталь: | *Actuator Plate Stage cover Actuator |
| Парткод: | 023-30006-008 |
| Деталь: | *Stage Cover Hinge Assy 3 |
| Парткод: | 023-30070-105 |
| Деталь: | Gauge Sheet II |
| Парткод: | 045-30010-100 |
| Деталь: | Collar Gauge Sheet 3 |
| Парткод: | 046-30052-004 |
| Деталь: | Adjuster Cam Gauge Sheet 3 |
| Парткод: | 046-30053-000 |
| Деталь: | Magnet Gauge Sheet 3 |
| Парткод: | 046-30054-007 |
| Деталь: | Stylus Editor |
| Парткод: | 024-36703-107 |
| Деталь: | Pen Case Digitizer |
| Парткод: | 045-36031-001 |
| Деталь: | Clamp Unit II(1-11) |
| Парткод: | 046-75015-070 |
| Деталь: | *Clamp Motor Assy(4-8) |
| Парткод: | 023-75070-050 |
| Деталь: | *Clamp Cam Assy II(2-3) |
| Парткод: | 046-75006-070 |
| Деталь: | **Gear M1X31X6 |
| Парткод: | 612-12315-000 |
| Деталь: | **Disc Clamp Sensor Assy |
| Парткод: | 023-75152-056 |
| Деталь: | **Bracket plate Clamp drive |
| Парткод: | 023-26000-003 |
| Деталь: | **Gear M0.8X37+M1X15 |
| Парткод: | 612-11304-005 |
| Деталь: | **Gear M0.8X35+M0.8X15 |
| Парткод: | 612-81303-006 |
| Деталь: | **Support Clamp Worm |
| Парткод: | 030-19205-001 |
| Деталь: | **Motor Assy (CWRS-445PA) |
| Парткод: | 023-74001-054 |
| Деталь: | *Bracket Clamp Sensor |
| Парткод: | 023-26005-005 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Wire Harness Clamp Unit |
| Парткод: | 023-26018-000 |
| Деталь: | Squeegee Unit A4(16-37) |
| Парткод: | 023-75092-150 |
| Деталь: | Main Frame Drum |
| Парткод: | 023-75164-151 |
| Деталь: | Flange Support Roller Drum |
| Парткод: | 023-17116-007 |
| Деталь: | LOCK RING 4 |
| Парткод: | 023-17197-007 |
| Деталь: | S-GAP CAM |
| Парткод: | 024-17027-001 |
| Деталь: | Fixing Plate Drive A4 |
| Парткод: | 023-17246-008 |
| Деталь: | Stepped Screw F6X3 M4X4 |
| Парткод: | 635-00003-008 |
| Деталь: | Center Shaft Drum |
| Парткод: | 023-17018-005 |
| Деталь: | Gear M1X45X6 |
| Парткод: | 612-10026-001 |
| Деталь: | Base Ink Blocking Plate (Front) |
| Парткод: | 023-17229-006 |
| Деталь: | Ink Blocking Plate Front |
| Парткод: | 023-17227-003 |
| Деталь: | Shaft Screw Ink Blocking Plate |
| Парткод: | 015-36317-305 |
| Деталь: | STEP SCREW |
| Парткод: | 635-17433-103 |
| Деталь: | Spring Ink Blocking Plate |
| Парткод: | 015-36318-000 |
| Деталь: | Base Ink Blocking Plate (Rear) |
| Парткод: | 023-17228-000 |
| Деталь: | Ink Blocking Plate Rear |
| Парткод: | 023-17226-007 |
| Деталь: | *Squeegee Roller A4 |
| Парткод: | 023-17209-200 |
| Деталь: | *Doctor Roller Assy A4 |
| Парткод: | 023-17331-102 |
| Деталь: | *Ink Drive Shaft A4 |
| Парткод: | 023-17211-107 |
| Деталь: | *Block F Squeegee |
| Парткод: | 023-17041-147 |
| Деталь: | *Metal S4X7X2 |
| Парткод: | 607-03001-001 |
| Деталь: | *O Ring P4-1.9 |
| Парткод: | 640-60040-000 |
| Деталь: | *Side Frame Squeegee F Assy |
| Парткод: | 024-17126-107 |
| Деталь: | *Adj. Plate L Squeegee Gap |
| Парткод: | 023-17336-201 |
| Деталь: | *Gear M0.8X19X4 |
| Парткод: | 612-10027-008 |
| Деталь: | *Gear M0.8X43X3 |
| Парткод: | 612-10028-101 |
| Деталь: | *Side Frame Squeegee R Assy |
| Парткод: | 024-17125-100 |
| Деталь: | *Block R Squeegee |
| Парткод: | 023-17040-140 |
| Деталь: | *Gear M1x25x7 OWC |
| Парткод: | 612-10024-106 |
| Деталь: | *Adj. Plate R Squeegee Gap |
| Парткод: | 023-17334-209 |
| Деталь: | *Support Bracket F A4 |
| Парткод: | 023-17213-304 |
| Деталь: | *Support Bracket R A4 |
| Парткод: | 023-17214-203 |
| Деталь: | *Plate Metal Drive Shaft Drum |
| Парткод: | 023-17242-002 |
| Деталь: | *Support Plate A |
| Парткод: | 023-17421-004 |
| Деталь: | *Support Plate B |
| Парткод: | 023-17422-000 |
| Деталь: | *Sheet Squeegee Roller |
| Парткод: | 639-00004-003 |
| Деталь: | *P Washer 8X18.5X1 |
| Парткод: | 639-00003-007 |
| Деталь: | *Collar Ink Drive Shaft |
| Парткод: | 023-17341-000 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | Spring Doctor Roller |
| Парткод: | 023-17333-008 |
| Деталь: | *TPH Assy II |
| Парткод: | 046-75002-059 |
| Деталь: | *TPH Assy II |
| Парткод: | 046-75003-055 |
| Деталь: | *TPH ASSYII-KB4(29-41) |
| Парткод: | 046-75020-057 |
| Деталь: | *TPH Pressure Motor Assy(44-55) |
| Парткод: | 023-75143-154 |
| Деталь: | *Frame |
| Парткод: | 023-28150-304 |
| Деталь: | *Shaft |
| Парткод: | 023-28157-007 |
| Деталь: | *Hook Lever |
| Парткод: | 023-28236-004 |
| Деталь: | *HOOK |
| Парткод: | 023-28237-000 |
| Деталь: | *Hook Spring |
| Парткод: | 023-28356-000 |
| Деталь: | *Pushing Plate R |
| Парткод: | 023-28253-103 |
| Деталь: | *Spring Hook Bracket Rear |
| Парткод: | 023-28152-005 |
| Деталь: | *Spring Rear |
| Парткод: | 023-28156-000 |
| Деталь: | *Pivot Support Plate Rear |
| Парткод: | 023-28252-107 |
| Деталь: | *Shaft |
| Парткод: | 023-28154-105 |
| Деталь: | *Pushing Plate F2 |
| Парткод: | 046-28034-007 |
| Деталь: | *Bracket Front |
| Парткод: | 023-28381-004 |
| Деталь: | *Spring Front |
| Парткод: | 023-28155-004 |
| Деталь: | *Pivot Support Plate Front |
| Парткод: | 023-28151-106 |
| Деталь: | *Safety Stopper |
| Парткод: | 023-28177-105 |
| Деталь: | *Seal |
| Парткод: | 023-28426-202 |
| Деталь: | *Upper Bracket A3 |
| Парткод: | 023-28418-005 |
| Деталь: | *Upper Bracket B4 |
| Парткод: | 024-28177-005 |
| Деталь: | *Upper Bracket A4 |
| Парткод: | 046-28036-000 |
| Деталь: | *light Absorber Strip(21X15) |
| Парткод: | 023-28431-001 |
| Деталь: | *Cover |
| Парткод: | 023-28427-004 |
| Деталь: | *Sensor (Rcv) |
| Парткод: | 444-42030-305 |
| Деталь: | *Bottom Cover |
| Парткод: | 023-28162-000 |
| Деталь: | *Spring |
| Парткод: | 023-28435-007 |
| Деталь: | *Pivot Shaft |
| Парткод: | 046-28008-006 |
| Деталь: | *Pressure Release Plate |
| Парткод: | 023-28160-008 |
| Деталь: | *Pressure Lever Bracket |
| Парткод: | 023-28159-301 |
| Деталь: | *TPH Pressure Spring 40 |
| Парткод: | 023-28161-004 |
| Деталь: | *TPH Pressure Spring 30 |
| Парткод: | 023-28441-104 |
| Деталь: | *TPH Pressure Spring 23 |
| Парткод: | 023-28344-109 |
| Деталь: | *TPH Alignment Shaft |
| Парткод: | 023-28173-100 |
| Деталь: | *METAL |
| Парткод: | 607-10008-003 |
| Деталь: | **Holding Bracket |
| Парткод: | 046-28005-007 |
| Деталь: | **Holding Bracket |
| Парткод: | 046-28019-008 |
| Деталь: | **Set Plate |
| Парткод: | 046-28032-004 |
| Деталь: | **TPH Pressure Assist Plate |
| Парткод: | 023-28413-003 |
| Деталь: | **TPH Pressure Assist Plate |
| Парткод: | 023-28387-002 |
| Деталь: | **TPH Boss |
| Парткод: | 023-28412-309 |
| Деталь: | **Protection Plate |
| Парткод: | 023-28315-206 |
| Деталь: | **Protection Plate |
| Парткод: | 023-28386-006 |
| Деталь: | **Stepped Screw |
| Парткод: | 635-10005-106 |
| Деталь: | **TPH 303R11 |
| Парткод: | 444-80001-106 |
| Деталь: | **TPH260R39 |
| Парткод: | 444-80002-102 |
| Деталь: | **TPH256R51 |
| Парткод: | 444-80004-008 |
| Деталь: | **Plate T-Rear |
| Парткод: | 023-28021-105 |
| Деталь: | **PLATE K-REAR |
| Парткод: | 023-28254-304 |
| Деталь: | **Plate T-Front |
| Парткод: | 023-28022-101 |
| Деталь: | **PLATE K-FRONT |
| Парткод: | 023-28255-300 |
| Деталь: | **Bracket |
| Парткод: | 023-28175-200 |
| Деталь: | **Bracket |
| Парткод: | 023-28298-107 |
| Деталь: | **Bracket |
| Парткод: | 023-28257-109 |
| Деталь: | **De-electricity Brush |
| Парткод: | 023-28411-000 |
| Деталь: | **De-electricity Brush |
| Парткод: | 023-28414-000 |
| Деталь: | **Holding roller |
| Парткод: | 023-28024-007 |
| Деталь: | **Holding roller |
| Парткод: | 023-28299-006 |
| Деталь: | **Holding roller |
| Парткод: | 023-28258-105 |
| Деталь: | **Metal |
| Парткод: | 607-10005-004 |
| Деталь: | **Ground Wire |
| Парткод: | 488-90030-109 |
| Деталь: | *Lock Ring |
| Парткод: | 019-11812-106 |
| Деталь: | *Wire Saddle |
| Парткод: | 665-02043-006 |
| Деталь: | **Bracket |
| Парткод: | 023-28168-106 |
| Деталь: | **Cam |
| Парткод: | 023-28165-000 |
| Деталь: | **Gear |
| Парткод: | 612-10010-008 |
| Деталь: | **Shaft |
| Парткод: | 023-28166-006 |
| Деталь: | **Metal |
| Парткод: | 607-13000-402 |
| Деталь: | **Pressure Detection Plate |
| Парткод: | 023-28361-003 |
| Деталь: | **Sensor |
| Парткод: | 444-30008-100 |
| Деталь: | **Shaft |
| Парткод: | 023-28213-004 |
| Деталь: | **Gear |
| Парткод: | 612-80006-008 |
| Деталь: | **Shaft |
| Парткод: | 023-28433-004 |
| Деталь: | **Gear |
| Парткод: | 612-80007-004 |
| Деталь: | **Gear |
| Парткод: | 612-80008-000 |
| Деталь: | *Motor Assy (CWRS-445PA) |
| Парткод: | 023-74001-054 |
| Деталь: | *Support |
| Парткод: | 030-19205-001 |
| Деталь: | *Holding Plate |
| Парткод: | 023-28172-006 |
| Деталь: | *Wire Harness |
| Парткод: | 023-28240-303 |
| Деталь: | *Gear Cover |
| Парткод: | 023-28328-103 |
| Деталь: | *Seal |
| Парткод: | 023-28942-103 |
| Деталь: | SEAL |
| Парткод: | 023-28424-005 |
| Деталь: | SEAL |
| Парткод: | 023-28423-009 |
| Деталь: | *Bracket |
| Парткод: | 023-28382-205 |
| Деталь: | *Spring |
| Парткод: | 023-28078-000 |
| Деталь: | *Stepped Screw |
| Парткод: | 635-10002-000 |
| Деталь: | *TPH Drawer Connector U (G) |
| Парткод: | 046-28037-006 |
| Деталь: | *Spacer 2 |
| Парткод: | 046-28052-005 |
| Деталь: | *Bracket |
| Парткод: | 046-28050-002 |
| Деталь: | *De-Electricity Brush |
| Парткод: | 023-28410-004 |
| Деталь: | Suction Unit II L(1-29,31-35) |
| Парткод: | 046-75023-072 |
| Деталь: | *P.-E. Pulley Suction |
| Парткод: | 020-13116-205 |
| Деталь: | *Shaft Belt Driven Pulley |
| Парткод: | 023-21361-202 |
| Деталь: | *Flat Belt 15X0.65X519 |
| Парткод: | 629-00002-004 |
| Деталь: | *M Wing Front |
| Парткод: | 023-21322-100 |
| Деталь: | *S Wing Front |
| Парткод: | 023-21324-102 |
| Деталь: | *Shaft Wing Front |
| Парткод: | 023-21335-104 |
| Деталь: | *Spring Wing Front |
| Парткод: | 023-21328-108 |
| Деталь: | *Spring Wing Rear |
| Парткод: | 023-21332-202 |
| Деталь: | *M Wing Rear |
| Парткод: | 023-21321-103 |
| Деталь: | *S Wing Rear |
| Парткод: | 023-21323-106 |
| Деталь: | *Shaft Wing Rear |
| Парткод: | 023-21325-109 |
| Деталь: | *Roller Plate Transfer Belt |
| Парткод: | 023-21371-100 |
| Деталь: | *Belt Roller Suction |
| Парткод: | 017-13216-000 |
| Деталь: | *link Plate S Wing |
| Парткод: | 023-21329-104 |
| Деталь: | *link Plate M Wing |
| Парткод: | 023-21331-001 |
| Деталь: | *Metal F6X10/9X6:12 X 1.5 |
| Парткод: | 607-13000-402 |
| Деталь: | *Drive Shaft Suction |
| Парткод: | 023-21351-207 |
| Деталь: | *Roller (Inner) Transfer Belt |
| Парткод: | 030-15249-004 |
| Деталь: | *Pulley P40S2M60 |
| Парткод: | 611-90002-003 |
| Деталь: | *Belt 40-S2M-138 |
| Парткод: | 621-00003-002 |
| Деталь: | *Bracket Paper Receiving sensor |
| Парткод: | 023-21401-000 |
| Деталь: | *Sensor GP2A210LCSJF |
| Парткод: | 444-33012-000 |
| Деталь: | *Wire Harness Ejection Sensor |
| Парткод: | 023-21703-006 |
| Деталь: | *Face Cover Suction |
| Парткод: | 023-21304-004 |
| Деталь: | *Suction Box Suction |
| Парткод: | 023-21302-109 |
| Деталь: | *Suction Motor Ccwrs-55PH |
| Парткод: | 023-74002-050 |
| Деталь: | **Metal Slit Motor |
| Парткод: | 023-21342-305 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Fan E1033H24BYAZ-33 |
| Парткод: | 490-41014-007 |
| Деталь: | Wire Harness Suction unit L/LL |
| Парткод: | 046-21803-005 |
| Деталь: | *Base Frame Suction |
| Парткод: | 046-21301-000 |
| Деталь: | *Wing Cam Suction |
| Парткод: | 023-21382-005 |
| Деталь: | *Wing Knob Suction |
| Парткод: | 023-21383-001 |
| Деталь: | *Support Wing Knob Suction |
| Парткод: | 023-21385-101 |
| Деталь: | *Support Plate Suction |
| Парткод: | 046-21302-006 |
| Деталь: | Seal Folding Tray Inst. P.-Rcv.-T. |
| Парткод: | 023-21801-008 |
| Деталь: | Seal Jump Wing Inst Metric |
| Парткод: | 023-21806-000 |
| Деталь: | Seal Jump Wing Inst Inch |
| Парткод: | 023-21807-006 |
| Деталь: | Fixing Pin |
| Парткод: | 020-13114-300 |
| Деталь: | Mount Bracket Front Suction Unit |
| Парткод: | 023-21391-101 |
| Деталь: | Mount Bracket Rear Suction Unit |
| Парткод: | 023-21392-108 |
| Деталь: | Cover Plate Suction |
| Парткод: | 023-21381-300 |
| Деталь: | De-electricity Brush 180 |
| Парткод: | 045-21316-000 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 046-53004-007 |
| Деталь: | Pick-up Roller(15-16) |
| Парткод: | 021-14301-143 |
| Деталь: | Cover P-Feed |
| Парткод: | 023-12316-202 |
| Деталь: | Seal: P.-Feed Pressure Pic. |
| Парткод: | 550-21173-001 |
| Деталь: | SEAL P.-F.-T. DOWN |
| Парткод: | 030-04034-006 |
| Деталь: | Upper Guard |
| Парткод: | 023-12319-007 |
| Деталь: | STEPPED SCREW F8X2.3 M4X4.4 |
| Парткод: | 635-00004-004 |
| Деталь: | E SWITCH PLATE |
| Парткод: | 023-12315-001 |
| Деталь: | SPRING ELEVATOR SAFETY SW UPPER |
| Парткод: | 023-12344-001 |
| Деталь: | Elevator SW Assy |
| Парткод: | 021-51030-109 |
| Деталь: | Elevator Safety SW |
| Парткод: | 023-53023-007 |
| Деталь: | FRAME BRACKET PICK-UP |
| Парткод: | 023-12333-204 |
| Деталь: | SHAFT PICK-UP ROLLER |
| Парткод: | 023-12329-002 |
| Деталь: | GEAR M0.8X33X7.4 |
| Парткод: | 612-10021-107 |
| Деталь: | METAL F10X15/14X6 18X2 |
| Парткод: | 607-16001-000 |
| Деталь: | SUPPORT PICK-UP ROLLER SHAFT |
| Парткод: | 023-12328-103 |
| Деталь: | Rubber Pick-Up Roller |
| Парткод: | 035-14303-001 |
| Деталь: | *Core Pickup Roller |
| Парткод: | 021-14302-107 |
| Деталь: | Lock Ring |
| Парткод: | 019-11812-106 |
| Деталь: | SCRAPER SHAFT PICKUP |
| Парткод: | 023-12330-000 |
| Деталь: | GEAR M0.8X34X8.5 |
| Парткод: | 612-11300-107 |
| Деталь: | ACTUATOR UPPER LIMIT STD P.-F.-T |
| Парткод: | 023-12334-006 |
| Деталь: | ACTUATOR UPPER LIMIT CARD P.-F.-T |
| Парткод: | 023-12308-005 |
| Деталь: | Stay Paper Feed |
| Парткод: | 023-12310-000 |
| Деталь: | ARM P.-F.PRESSURE ADJ. |
| Парткод: | 020-11813-103 |
| Деталь: | SPRING B P.-F.PRESSURE ADJ. |
| Парткод: | 020-11811-208 |
| Деталь: | P.-F.Pressure Adj.Lever |
| Парткод: | 023-12312-100 |
| Деталь: | SPRING PF PRESSURE ADJ. LEVER |
| Парткод: | 023-12313-106 |
| Деталь: | BRACKET A UPPER LIMIT SENSOR |
| Парткод: | 023-12314-005 |
| Деталь: | BRACKET B UPPER LIMIT SENSOR |
| Парткод: | 046-12301-005 |
| Деталь: | BASE UPPER LIMIT ADJ. SCREW |
| Парткод: | 030-14347-002 |
| Деталь: | BRACKET UPPER LIMIT SENSOR |
| Парткод: | 023-12325-007 |
| Деталь: | Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Junction Wire Harness Safety SW |
| Парткод: | 046-12701-100 |
| Деталь: | Bracket Clutch Pick-Up Roller |
| Парткод: | 023-15083-004 |
| Деталь: | Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | P.-F.Clutch |
| Парткод: | 020-65009-300 |
| Деталь: | Shaft P.-F. Clutch |
| Парткод: | 023-15080-005 |
| Деталь: | Metal F8X12/10.8X14 16X2 |
| Парткод: | 607-15001-503 |
| Деталь: | Wire Harness Paper Feed Rear |
| Парткод: | 046-53005-003 |
| Деталь: | Support Plate Upper Limit Adjust |
| Парткод: | 046-12302-001 |
| Деталь: | Panel Unit 200E(1-18,43-45) |
| Парткод: | 046-75038-053 |
| Деталь: | Panel Unit 220U(1-18,43-45) |
| Парткод: | 046-75039-050 |
| Деталь: | Panel Unit 230E/U(1-18,43-45) |
| Парткод: | 046-75040-058 |
| Деталь: | Panel Unit 220/200A(1-18,43-45) |
| Парткод: | 046-75041-054 |
| Деталь: | Panel Unit 230A(1-18,43-45) |
| Парткод: | 046-75042-050 |
| Деталь: | Panel Unit EV25(1-18,43-45) |
| Парткод: | 046-75043-057 |
| Деталь: | *Frame Panel |
| Парткод: | 023-37002-202 |
| Деталь: | Panel Mode Key Pic |
| Парткод: | 023-37061-004 |
| Деталь: | Panel Mode Key Eng |
| Парткод: | 023-37015-002 |
| Деталь: | Panel Mode Key Ch |
| Парткод: | 023-37062-000 |
| Деталь: | Print Control RZ2 Pic/mm |
| Парткод: | 023-37071-107 |
| Деталь: | Print Control RZ2 Eng/inch |
| Парткод: | 023-37069-102 |
| Деталь: | Print Control RZ2 Eng/mm |
| Парткод: | 023-37070-100 |
| Деталь: | Print Control RZ2 Ch/mm |
| Парткод: | 023-37072-103 |
| Деталь: | Main Panel (Pic) |
| Парткод: | 046-37018-103 |
| Деталь: | Main Panel (En) |
| Парткод: | 046-37017-000 |
| Деталь: | Main Panel (Ch) |
| Парткод: | 046-37019-002 |
| Деталь: | Sub Panel 230E/U |
| Парткод: | 046-37011-001 |
| Деталь: | Sub Panel 200E |
| Парткод: | 046-37012-008 |
| Деталь: | Sub Panel 220U |
| Парткод: | 046-37016-003 |
| Деталь: | Sub Panel 230A |
| Парткод: | 046-37013-004 |
| Деталь: | Sub Panel 220/200A |
| Парткод: | 046-37015-007 |
| Деталь: | Sub Panel 2560C |
| Парткод: | 046-37014-000 |
| Деталь: | *Cover Sub-Panel |
| Парткод: | 023-37013-107 |
| Деталь: | *Wake-Up Key |
| Парткод: | 023-37056-108 |
| Деталь: | *Reset Key Pic. |
| Парткод: | 023-37047-001 |
| Деталь: | *Reset Key Eng |
| Парткод: | 023-37046-005 |
| Деталь: | *Reset Key Ch |
| Парткод: | 023-37048-008 |
| Деталь: | *Stop Key Pic. |
| Парткод: | 023-37037-006 |
| Деталь: | *Stop Key Eng |
| Парткод: | 023-37036-000 |
| Деталь: | *Stop Key Ch |
| Парткод: | 023-37038-002 |
| Деталь: | *Print Mode Key |
| Парткод: | 023-37050-100 |
| Деталь: | *Test Print Key Pic. |
| Парткод: | 023-37042-000 |
| Деталь: | *Test Print Key Eng |
| Парткод: | 023-37041-003 |
| Деталь: | *Test Print Key Ch |
| Парткод: | 023-37043-006 |
| Деталь: | *Start Key Pic. |
| Парткод: | 023-37032-004 |
| Деталь: | *Start Key Eng |
| Парткод: | 023-37031-008 |
| Деталь: | *Start Key Ch. |
| Парткод: | 023-37033-108 |
| Деталь: | *Numeric Key |
| Парткод: | 023-37040-007 |
| Деталь: | *Print Control Key RZ2 |
| Парткод: | 023-37052-005 |
| Деталь: | *Protection Shield |
| Парткод: | 023-37011-104 |
| Деталь: | *Led-Pnl-Ctl-Pcb |
| Парткод: | 046-37001-006 |
| Деталь: | *Main-SW-PCB |
| Парткод: | 023-37022-300 |
| Деталь: | *Sub SW PCB LL |
| Парткод: | 046-37002-002 |
| Деталь: | Bracket Front Cover SW |
| Парткод: | 023-34051-105 |
| Деталь: | MAGNET CATCH SM50-P |
| Парткод: | 660-00002-004 |
| Деталь: | Bracket Sensor Front Cover |
| Парткод: | 023-34053-205 |
| Деталь: | SENSOR LG285D1 |
| Парткод: | 444-30010-007 |
| Деталь: | Wire Harness Lower F (G) |
| Парткод: | 046-53015-009 |
| Деталь: | Bracket Counter |
| Парткод: | 023-50022-000 |
| Деталь: | COUNTER |
| Парткод: | 492-00001-108 |
| Деталь: | Wire Harness Main Power SW |
| Парткод: | 046-50013-005 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | SB-6025 |
| Парткод: | 665-04055-001 |
| Деталь: | Edging Saddle LES-1017 |
| Парткод: | 665-00309-009 |
| Деталь: | Wire Harness Panel.M-Rmv L/LL |
| Парткод: | 046-53019-101 |
| Деталь: | Wire Harness Lower R (G) |
| Парткод: | 046-53016-005 |
| Деталь: | *Grounding Plate A Panel |
| Парткод: | 023-37027-000 |
| Деталь: | *Grounding Plate B Panel |
| Парткод: | 023-37028-007 |
| Деталь: | *Grounding Plate C Panel |
| Парткод: | 023-37029-003 |
| Деталь: | Support Bracket FB Scanner |
| Парткод: | 023-10015-000 |
| Деталь: | Rubber Foot 4527 |
| Парткод: | 660-01016-203 |
| Деталь: | Noise Absorber Bottom Main Frame |
| Парткод: | 023-10024-000 |
| Деталь: | Transportation Support Plate |
| Парткод: | 023-10008-004 |
| Деталь: | Lifting Handle |
| Парткод: | 023-10017-100 |
| Деталь: | Stopper lifting Handle |
| Парткод: | 023-10030-000 |
| Деталь: | Cover Guide Roller |
| Парткод: | 046-12506-006 |
| Деталь: | Noise Absorber Guide Roller Cover |
| Парткод: | 023-12544-108 |
| Деталь: | Lower Cover Guide Plate |
| Парткод: | 023-12541-001 |
| Деталь: | STAY GUIDE PLATE |
| Парткод: | 023-12536-105 |
| Деталь: | Stopper M.-M. Unit |
| Парткод: | 023-28358-002 |
| Деталь: | Protection Plate Wire Harness M.-M. |
| Парткод: | 023-28408-000 |
| Деталь: | Support Plate F P.-Rcv.-T. |
| Парткод: | 023-21641-108 |
| Деталь: | Support Plate R P.-Rcv.-T. |
| Парткод: | 023-21642-104 |
| Деталь: | Magnet Catch P.-Rcv.-T. |
| Парткод: | 023-21622-006 |
| Деталь: | Wire Saddle LWS-1316 |
| Парткод: | 665-02043-006 |
| Деталь: | Edging Saddle EDS-17L |
| Парткод: | 665-02039-009 |
| Деталь: | P.-Rcv.-T Unit LL(1-22) |
| Парткод: | 023-75096-156 |
| Деталь: | *Back Stopper P.-RCV.-T |
| Парткод: | 023-21608-003 |
| Деталь: | *Fence Cushion |
| Парткод: | 018-33151-408 |
| Деталь: | *Shaft Fence |
| Парткод: | 023-21634-101 |
| Деталь: | *Slide Base P.Rcv.-T. |
| Парткод: | 023-21635-108 |
| Деталь: | *Slide Plate(Lower) P.-Rcv.-T. |
| Парткод: | 023-21637-003 |
| Деталь: | *Plate Spring P.-Rcv.-T |
| Парткод: | 023-21638-107 |
| Деталь: | *Slide Plate(Upper) P.-Rcv.-T. |
| Парткод: | 023-21636-147 |
| Деталь: | *Lever Paper Guide P.-Rcv.-T. |
| Парткод: | 023-21621-000 |
| Деталь: | *Paper Guide R P.-Rcv.-T. |
| Парткод: | 023-21607-201 |
| Деталь: | *Paper Guide F P.-Rcv.-T. |
| Парткод: | 023-21606-205 |
| Деталь: | *Paper Guiding Arm F |
| Парткод: | 023-21650-000 |
| Деталь: | *Paper Guiding Arm R |
| Парткод: | 023-21651-006 |
| Деталь: | *Shaft Paper Guiding Arm |
| Парткод: | 023-21652-002 |
| Деталь: | *Spring Paper Guiding Arm |
| Парткод: | 023-21653-009 |
| Деталь: | *Slide Rail Paper Guide P.-Rcv.-T. |
| Парткод: | 023-21639-006 |
| Деталь: | *Slide Rail Paper Stopper P.-Rcv.-T. |
| Парткод: | 023-21640-004 |
| Деталь: | *Side Frame R P.-Rcv.-T. |
| Парткод: | 023-21603-508 |
| Деталь: | *Side Frame F P.-Rcv.-T. |
| Парткод: | 023-21602-501 |
| Деталь: | *Ground Plate Slide Rail P.Rcv.-T. |
| Парткод: | 023-21633-105 |
| Деталь: | *Paper Receiving Tray |
| Парткод: | 023-21601-106 |
| Деталь: | *Bracket Magnet Catch P.-Rcv.-T. |
| Парткод: | 023-21643-003 |
| Деталь: | *Magnet Catch SM-77S |
| Парткод: | 660-05000-018 |
| Деталь: | Power Supply PS19-NWW |
| Парткод: | 046-50510-009 |
| Деталь: | PS15-N200 |
| Парткод: | 023-50073-305 |
| Деталь: | Bracket Upper Power Supply |
| Парткод: | 046-50008-206 |
| Деталь: | Bracket Lower Power Supply |
| Парткод: | 046-50009-105 |
| Деталь: | Set Plate Safety SW Rear |
| Парткод: | 046-50010-006 |
| Деталь: | Shaft Bracket Drive Interlock SW |
| Парткод: | 023-50042-108 |
| Деталь: | Stepped Screw F5X6.8 M3X4 |
| Парткод: | 635-10013-001 |
| Деталь: | Shaft Drive Interlock SW |
| Парткод: | 042-50010-007 |
| Деталь: | DRIVE INTERLOCK SAFETY SW |
| Парткод: | 023-53026-006 |
| Деталь: | Frame Drive Safety SW |
| Парткод: | 046-50011-002 |
| Деталь: | Spring Drive Interlock SW |
| Парткод: | 042-50014-002 |
| Деталь: | Hinge Upper PCB Bracket Ejection Side |
| Парткод: | 023-50001-002 |
| Деталь: | Hinge Lower PCB Bracket Ejection Side |
| Парткод: | 023-50002-106 |
| Деталь: | Secure Bracket Rear Lower |
| Парткод: | 046-50007-005 |
| Деталь: | Secure Bracket Rear Upper |
| Парткод: | 046-50006-009 |
| Деталь: | Wire Saddle LWS-2218 |
| Парткод: | 665-02055-004 |
| Деталь: | Wire Saddle LWS-1316 |
| Парткод: | 665-02043-006 |
| Деталь: | SB-6025 |
| Парткод: | 665-04055-001 |
| Деталь: | Square Bushing SB-4025 |
| Парткод: | 665-04002-005 |
| Деталь: | Square Bushing SB-2718 |
| Парткод: | 665-04054-005 |
| Деталь: | Edging Saddle EDS-17L |
| Парткод: | 665-02039-009 |
| Деталь: | Junction Wire Harness M-Motor |
| Парткод: | 046-53011-003 |
| Деталь: | Wire Harness Main Power SW |
| Парткод: | 046-50013-005 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 046-53008-002 |
| Деталь: | Power Cord 220V EU (L) |
| Парткод: | 488-00048-101 |
| Деталь: | Power Cord 100V (L) |
| Парткод: | 488-00050-009 |
| Деталь: | POWER CORD CH. |
| Парткод: | 488-00049-108 |
| Деталь: | Washer F4.5X12X1 |
| Парткод: | 023-50014-007 |
| Деталь: | Edging Saddle LES-1017 |
| Парткод: | 665-00309-009 |
| Деталь: | Scanner Unit 300CA(Fig26-27) |
| Парткод: | 046-75059-000 |
| Деталь: | *Original Stopper Assy(1-5) |
| Парткод: | 046-75056-000 |
| Деталь: | *Assy S-FRM-UP-64(6-13) |
| Парткод: | 046-30067-001 |
| Деталь: | *Stage Glass Assy(14-16) |
| Парткод: | 021-17504-002 |
| Деталь: | FB Actuator Assy(32-35) |
| Парткод: | 023-75167-150 |
| Деталь: | **Blind Cover Guide |
| Парткод: | 021-17568-205 |
| Деталь: | **Sponge GID-FR |
| Парткод: | 046-30062-000 |
| Деталь: | **Sponge GID-S |
| Парткод: | 046-30063-006 |
| Деталь: | **SPNG-GID-UCN-L |
| Парткод: | 021-17149-008 |
| Деталь: | **SPNG-GID-UCN-S |
| Парткод: | 021-17150-006 |
| Деталь: | **Adj. Plate PLT-ADJ-GLASS |
| Парткод: | 021-17545-205 |
| Деталь: | **Sponge Spr-Glass-R |
| Парткод: | 021-17531-107 |
| Деталь: | **Sponge Spr-Glass-F |
| Парткод: | 021-17530-100 |
| Деталь: | *Screw Scr-M3-1.6 |
| Парткод: | 021-17525-000 |
| Деталь: | *Sponge Spng-Ccd-Cable |
| Парткод: | 021-17517-007 |
| Деталь: | *Guide Plate Plt-Ccd-Cable2 |
| Парткод: | 021-17547-100 |
| Деталь: | *Bracket HP-SENS Scanner |
| Парткод: | 021-17567-004 |
| Деталь: | *Sensor Tlp1241(C5) |
| Парткод: | 021-53141-102 |
| Деталь: | *Wire Harness ASM-H.Psens |
| Парткод: | 021-51121-007 |
| Деталь: | *PCB Pba-Chukei |
| Парткод: | 021-50535-100 |
| Деталь: | *Cover CVR-OPT |
| Парткод: | 046-30038-001 |
| Деталь: | *S-Assy S-CCD-UNIT-64-3V |
| Парткод: | 046-30068-008 |
| Деталь: | *Wire Harness ASM-MAIN-I/F-64 |
| Парткод: | 046-30048-007 |
| Деталь: | *Cover Plate PLT-APS-SENS |
| Парткод: | 021-17543-105 |
| Деталь: | *Sensor Ey3A-1061 |
| Парткод: | 021-53142-001 |
| Деталь: | *Wire Harness ASM-Emptysens |
| Парткод: | 021-51122-100 |
| Деталь: | *Plate Plt-Ccd-Cable Scanner |
| Парткод: | 021-17544-101 |
| Деталь: | *Guide Bracket Guide-Ffc-Frame |
| Парткод: | 021-17569-007 |
| Деталь: | *Spring Actuator |
| Парткод: | 021-17129-104 |
| Деталь: | *Actuator 2 Scanner |
| Парткод: | 023-30073-007 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Bracket Stage cover closing sensor |
| Парткод: | 023-30071-004 |
| Деталь: | Hinge Bracket Flat Bed |
| Парткод: | 023-30002-100 |
| Деталь: | Bracket FB Scanner |
| Парткод: | 023-30003-009 |
| Деталь: | Edging Saddle LES-25L |
| Парткод: | 665-00308-002 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 046-53008-002 |
| Деталь: | *Wire Saddle RLMC-05T-V0 |
| Парткод: | 033-15129-000 |
| Деталь: | FFC Clamp FC-45 |
| Парткод: | 665-00310-007 |
| Деталь: | Bracket Flat Cable Guide |
| Парткод: | 045-30008-008 |
| Деталь: | Suction Unit II ML(1-44) |
| Парткод: | 046-75007-077 |
| Деталь: | *P.-E. Pulley Suction |
| Парткод: | 020-13116-205 |
| Деталь: | *Shaft Belt Driven Pulley |
| Парткод: | 023-21361-202 |
| Деталь: | *Flat Belt 15X0.65X519 |
| Парткод: | 629-00002-004 |
| Деталь: | *M Wing Front |
| Парткод: | 023-21322-100 |
| Деталь: | *S Wing Front |
| Парткод: | 023-21324-102 |
| Деталь: | *Shaft Wing Front |
| Парткод: | 023-21335-104 |
| Деталь: | *Spring Wing Front |
| Парткод: | 023-21328-108 |
| Деталь: | *Spring Wing Rear |
| Парткод: | 023-21332-202 |
| Деталь: | *M Wing Rear |
| Парткод: | 023-21321-103 |
| Деталь: | *S Wing Rear |
| Парткод: | 023-21323-106 |
| Деталь: | *Shaft Wing Rear |
| Парткод: | 023-21325-109 |
| Деталь: | *Roller Plate Transfer Belt |
| Парткод: | 023-21371-100 |
| Деталь: | *Belt Roller Suction |
| Парткод: | 017-13216-000 |
| Деталь: | *link Plate S Wing |
| Парткод: | 023-21329-104 |
| Деталь: | *link Plate M Wing |
| Парткод: | 023-21331-001 |
| Деталь: | *Metal F6X10/9X6:12 X 1.5 |
| Парткод: | 607-13000-402 |
| Деталь: | *Drive Shaft Suction |
| Парткод: | 023-21351-207 |
| Деталь: | *Roller (Inner) Transfer Belt |
| Парткод: | 030-15249-004 |
| Деталь: | *Pulley P40S2M60 |
| Парткод: | 611-90002-003 |
| Деталь: | *Belt 40-S2M-138 |
| Парткод: | 621-00003-002 |
| Деталь: | *Bracket Paper Receiving sensor |
| Парткод: | 023-21401-000 |
| Деталь: | *Sensor GP2A210LCSJF |
| Парткод: | 444-33012-000 |
| Деталь: | *Wire Harness Ejection Sensor |
| Парткод: | 023-21703-006 |
| Деталь: | *Face Cover Suction |
| Парткод: | 023-21304-004 |
| Деталь: | *Suction Box Suction |
| Парткод: | 023-21302-109 |
| Деталь: | *Suction Motor Ccwrs-55PH |
| Парткод: | 023-74002-050 |
| Деталь: | **Metal Slit Motor |
| Парткод: | 023-21342-305 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Fan E1033H24BYAZ-33 |
| Парткод: | 490-41014-007 |
| Деталь: | *Wire Harness Suction Unit |
| Парткод: | 046-21801-100 |
| Деталь: | *Base Frame Suction |
| Парткод: | 046-21301-000 |
| Деталь: | *Boss Wing cam shaft F6x9x6:12x1.5 |
| Парткод: | 023-21406-001 |
| Деталь: | *W cam shaft Wing |
| Парткод: | 023-21410-009 |
| Деталь: | *MW cam Wing |
| Парткод: | 023-21408-004 |
| Деталь: | *Helical gear M1x16x6 |
| Парткод: | 612-30001-005 |
| Деталь: | *SW cam Wing |
| Парткод: | 023-21409-108 |
| Деталь: | *Base Bracket Wing motor |
| Парткод: | 023-21404-106 |
| Деталь: | *Motor PM42L-048-ZVN6 |
| Парткод: | 490-33015-100 |
| Деталь: | *Worm gear M1x12x1 |
| Парткод: | 612-50005-007 |
| Деталь: | *W drive shaft Wing motor |
| Парткод: | 023-21411-102 |
| Деталь: | *Gear M0.5x21x6 |
| Парткод: | 612-10035-000 |
| Деталь: | *Cover plate suction cover |
| Парткод: | 023-21384-008 |
| Деталь: | *Support Plate Suction |
| Парткод: | 046-21302-006 |
| Деталь: | De-electricity Brush 180 |
| Парткод: | 045-21316-000 |
| Деталь: | Seal Folding Tray Inst. P.-Rcv.-T. |
| Парткод: | 023-21801-008 |
| Деталь: | Fixing Pin |
| Парткод: | 020-13114-300 |
| Деталь: | Mount Bracket Front Suction Unit |
| Парткод: | 023-21391-101 |
| Деталь: | Mount Bracket Rear Suction Unit |
| Парткод: | 023-21392-108 |
| Деталь: | Cover Plate Suction |
| Парткод: | 023-21381-300 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 046-53004-007 |
| Деталь: | Master Removal Unit EZ-A3,B4 (Fig33-34) |
| Парткод: | 046-75004-078 |
| Деталь: | *Housing M.-Rev. |
| Парткод: | 046-24021-105 |
| Деталь: | *Bracket Housing M.-Rev. |
| Парткод: | 046-24128-007 |
| Деталь: | *Hook M.-Rmv Roller |
| Парткод: | 046-24062-006 |
| Деталь: | *Shaft Pulley M.-Rmv. |
| Парткод: | 046-24007-005 |
| Деталь: | *Holding Plate Pulley M.-Rmv. |
| Парткод: | 023-24129-009 |
| Деталь: | *Plate M.-Rmv. Pulley |
| Парткод: | 023-24062-109 |
| Деталь: | *Pulley M-Rmv |
| Парткод: | 023-24061-102 |
| Деталь: | *Shaft Pulley M-Rmv |
| Парткод: | 023-24063-202 |
| Деталь: | *Spring Roller B1 |
| Парткод: | 024-24067-000 |
| Деталь: | *O Ring S42-2.0 |
| Парткод: | 640-60001-004 |
| Деталь: | *Shaft Roller M.-Rmv. |
| Парткод: | 046-24057-100 |
| Деталь: | *Pin F2X14 |
| Парткод: | X-530 |
| Деталь: | *Spring Catch |
| Парткод: | 030-19131-008 |
| Деталь: | *Spring Roller |
| Парткод: | 024-25057-009 |
| Деталь: | *Pulley Shaft M.-Rmv. |
| Парткод: | 046-24025-003 |
| Деталь: | *Metal F6X10/9X6:12X1.5 |
| Парткод: | 607-13000-102 |
| Деталь: | *Gear m1.25x16x7 |
| Парткод: | 612-10058-000 |
| Деталь: | *Bracket Master Loading Sensor |
| Парткод: | 046-24088-005 |
| Деталь: | *Master Loading Sensor |
| Парткод: | 444-43007-404 |
| Деталь: | *Bracket M.-Rmv .Sensor |
| Парткод: | 046-24056-006 |
| Деталь: | *Sensor OS-RS04Y01-A5 |
| Парткод: | 444-41003-100 |
| Деталь: | *Bracket HP Sensor Compression Plate |
| Парткод: | 046-24011-002 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Lock Ring 4 |
| Парткод: | 023-17197-007 |
| Деталь: | *Wire Harness U M.-Rmv. |
| Парткод: | 046-24200-000 |
| Деталь: | *Spring Roller Hook |
| Парткод: | 024-25058-102 |
| Деталь: | Main Gear Assy A3 (8-14) |
| Парткод: | 023-75124-150 |
| Деталь: | Main Gear Assy B4(8-14) |
| Парткод: | 023-75125-156 |
| Деталь: | Main Gear Assy A4 (8-14) |
| Парткод: | 023-75126-055 |
| Деталь: | Main Motor Assy II(21-24) |
| Парткод: | 046-75011-058 |
| Деталь: | Pressure Solenoid Assy(26-29) |
| Парткод: | 023-75153-052 |
| Деталь: | Bearing Main Shaft |
| Парткод: | 023-15001-008 |
| Деталь: | Main Cover Drive |
| Парткод: | 023-15108-201 |
| Деталь: | Support Plate Main Motor |
| Парткод: | 030-12235-304 |
| Деталь: | Bracket Pressure Shaft |
| Парткод: | 023-15012-000 |
| Деталь: | Tensioner Lever Main Belt |
| Парткод: | 023-15006-204 |
| Деталь: | Stepped Screw 8X1.7 M4X4.3 |
| Парткод: | 635-17814-107 |
| Деталь: | Pulley P18-5GT-12 |
| Парткод: | 611-90006-009 |
| Деталь: | Joint Collar Drive |
| Парткод: | 023-15089-002 |
| Деталь: | *Shaft Joint Drive |
| Парткод: | 023-15003-000 |
| Деталь: | *Main Shaft Drive |
| Парткод: | 023-15002-004 |
| Деталь: | *Main Gear Drive |
| Парткод: | 023-15121-100 |
| Деталь: | *Pulley P42-5Gt |
| Парткод: | 611-90007-102 |
| Деталь: | *Pressure Cam A3 |
| Парткод: | 023-15011-003 |
| Деталь: | *Pressure Cam B4 |
| Парткод: | 023-15129-101 |
| Деталь: | *Pressure Cam A4 |
| Парткод: | 023-15128-008 |
| Деталь: | *Actuator B position sensor |
| Парткод: | 023-15046-001 |
| Деталь: | Bracket B Position Sensor |
| Парткод: | 023-15150-003 |
| Деталь: | Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 046-53004-007 |
| Деталь: | Pressure Lever II Cam |
| Парткод: | 046-15006-101 |
| Деталь: | Spring Cam Follower |
| Парткод: | 045-15145-007 |
| Деталь: | Pressure Lever II Spring |
| Парткод: | 046-15004-109 |
| Деталь: | *Motor CWTD3337G-24F-9K24D |
| Парткод: | 490-22024-000 |
| Деталь: | *Bracket Main Motor |
| Парткод: | 023-15047-105 |
| Деталь: | *Gear M1X80X10 |
| Парткод: | 612-10017-002 |
| Деталь: | *Pulley P42-5GT-13 |
| Парткод: | 611-90008-109 |
| Деталь: | Belt 645-5GT-10 |
| Парткод: | 620-00010-001 |
| Деталь: | *Base Bracket Pressure Solenoid |
| Парткод: | 023-15020-100 |
| Деталь: | *Solenoid Tds-10A-1056 |
| Парткод: | 490-50006-009 |
| Деталь: | *Lever Pressure Solenoid |
| Парткод: | 030-12114-108 |
| Деталь: | *Spring Pressure Solenoid |
| Парткод: | 023-15123-006 |
| Деталь: | Lever Assy Separator |
| Парткод: | 023-15037-002 |
| Деталь: | SPRING SEPARATOR |
| Парткод: | 023-15038-009 |
| Деталь: | Metal F16X22/19X6 26X2 |
| Парткод: | 607-10003-001 |
| Деталь: | Shock Absorber Pad Pressure Lever |
| Парткод: | 045-15162-106 |
| Деталь: | TPH Drawer Connector H (G) |
| Парткод: | 046-53014-002 |
| Деталь: | *Assy ASY-CRG1-64(7-20) |
| Парткод: | 046-30069-004 |
| Деталь: | *Assy ASY-CR2-64(21-30) |
| Парткод: | 046-30044-001 |
| Деталь: | *Assy S-PLY-DRIVE(31-32) |
| Парткод: | 046-30070-002 |
| Деталь: | *Plastic Bearing RBB080160F |
| Парткод: | 045-30101-008 |
| Деталь: | *Pulley Ply-S1.5M-90-30 |
| Парткод: | 021-17575-007 |
| Деталь: | *Bracket K-BKT-MOT-S |
| Парткод: | 046-30045-008 |
| Деталь: | *Bracket BKT-MOT-64B |
| Парткод: | 046-30023-004 |
| Деталь: | *Motor Kh42Jm2B154 |
| Парткод: | 021-53201-008 |
| Деталь: | **Inverter Pws-Pxz170E4-B |
| Парткод: | 021-50536-106 |
| Деталь: | **Cover Inverter CVR-INV |
| Парткод: | 021-17558-102 |
| Деталь: | **Mylar Inverter Mlr-Inv |
| Парткод: | 021-17518-003 |
| Деталь: | **Slide Guide BUSH-SLIDE-64 |
| Парткод: | 046-30064-002 |
| Деталь: | **Reflector |
| Парткод: | 021-17556-002 |
| Деталь: | **Wire Harness CBP-LMP |
| Парткод: | 021-51123-000 |
| Деталь: | **Lamp Uxfl-08Yg37P2 |
| Парткод: | 021-53143-105 |
| Деталь: | **Slide Guide Slide-Bush Carriage |
| Парткод: | 021-17564-005 |
| Деталь: | *Pulley Ply-S1.5M-75 |
| Парткод: | 021-17574-000 |
| Деталь: | *Belt ST1116040 |
| Парткод: | 046-30019-007 |
| Деталь: | *Belt ST1173040 |
| Парткод: | 046-30024-000 |
| Деталь: | *Bracket Pulley BKT-DV |
| Парткод: | 021-17540-106 |
| Деталь: | *Shaft Pulley Sft-Dv |
| Парткод: | 021-17579-002 |
| Деталь: | *Bracket BKT-WIRE-HOLD |
| Парткод: | 021-17557-106 |
| Деталь: | *Pulley Dv-19-H5-W0.25 |
| Парткод: | 021-17582-100 |
| Деталь: | *Wire Front Wr-7X7-S-F |
| Парткод: | 021-17507-109 |
| Деталь: | *Wire Rear Wr-7X7-Z-R |
| Парткод: | 021-17508-105 |
| Деталь: | *Clip CLIP050140B |
| Парткод: | 046-30065-009 |
| Деталь: | *Washer WAS-082-120-050PW |
| Парткод: | 046-30066-005 |
| Деталь: | *Sponge SPNG-MIR2 |
| Парткод: | 046-30027-000 |
| Деталь: | Wire Harness FB Pulse Motor |
| Парткод: | 024-53057-006 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 046-53008-002 |
| Деталь: | Pick-up Roller(15-16) |
| Парткод: | 021-14301-046 |
| Деталь: | Cover P-Feed |
| Парткод: | 023-12316-105 |
| Деталь: | Seal: P.-Feed Pressure Pic. |
| Парткод: | 550-21173-001 |
| Деталь: | SEAL P.-F.-T. DOWN |
| Парткод: | 030-04034-006 |
| Деталь: | Upper Guard |
| Парткод: | 023-12319-007 |
| Деталь: | STEPPED SCREW F8X2.3 M4X4.4 |
| Парткод: | 635-00004-004 |
| Деталь: | E SWITCH PLATE |
| Парткод: | 023-12315-001 |
| Деталь: | SPRING ELEVATOR SAFETY SW UPPER |
| Парткод: | 023-12344-001 |
| Деталь: | Elevator SW Assy |
| Парткод: | 021-51030-109 |
| Деталь: | Elevator Safety SW |
| Парткод: | 023-53023-007 |
| Деталь: | FRAME BRACKET PICK-UP |
| Парткод: | 023-12333-204 |
| Деталь: | SHAFT PICK-UP ROLLER |
| Парткод: | 023-12329-002 |
| Деталь: | GEAR M0.8X33X7.4 |
| Парткод: | 612-10021-107 |
| Деталь: | METAL F10X15/14X6 18X2 |
| Парткод: | 607-16001-000 |
| Деталь: | SUPPORT PICK-UP ROLLER SHAFT |
| Парткод: | 023-12328-103 |
| Деталь: | Rubber Pick-Up Roller |
| Парткод: | 035-14303-001 |
| Деталь: | *Core Pickup Roller |
| Парткод: | 021-14302-000 |
| Деталь: | Lock Ring |
| Парткод: | 019-11812-106 |
| Деталь: | SCRAPER SHAFT PICKUP |
| Парткод: | 023-12330-000 |
| Деталь: | GEAR M0.8X34X8.5 |
| Парткод: | 612-11300-107 |
| Деталь: | ACTUATOR UPPER LIMIT STD P.-F.-T |
| Парткод: | 023-12334-006 |
| Деталь: | Stay Paper Feed |
| Парткод: | 023-12310-000 |
| Деталь: | ARM P.-F.PRESSURE ADJ. |
| Парткод: | 020-11813-006 |
| Деталь: | SPRING B P.-F.PRESSURE ADJ. |
| Парткод: | 020-11811-100 |
| Деталь: | P.-F.Pressure Adj.Lever |
| Парткод: | 023-12312-100 |
| Деталь: | SPRING PF PRESSURE ADJ. LEVER |
| Парткод: | 023-12313-009 |
| Деталь: | BRACKET A UPPER LIMIT SENSOR |
| Парткод: | 023-12314-005 |
| Деталь: | BRACKET B UPPER LIMIT SENSOR |
| Парткод: | 046-12301-005 |
| Деталь: | BASE UPPER LIMIT ADJ. SCREW |
| Парткод: | 030-14347-002 |
| Деталь: | BRACKET UPPER LIMIT SENSOR |
| Парткод: | 023-12325-007 |
| Деталь: | Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Junction Wire Harness Safety SW LL |
| Парткод: | 046-12706-005 |
| Деталь: | Bracket Clutch Pick-Up Roller |
| Парткод: | 023-15083-004 |
| Деталь: | Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | P.-F.Clutch |
| Парткод: | 020-65009-202 |
| Деталь: | Shaft P.-F. Clutch |
| Парткод: | 023-15080-005 |
| Деталь: | Metal F8X12/10.8X14 16X2 |
| Парткод: | 607-15001-503 |
| Деталь: | Wire Harness Paper Feed Rear |
| Парткод: | 046-53005-003 |
| Деталь: | Support Plate Upper Limit Adjust |
| Парткод: | 046-12302-001 |
Коды ошибок
A01
A02
A04
A05
A06
A07(J)
A08(J)
A09(J)
A10(J)
A16
A17
A34
B01
B02
B03
B04
B05
B21
B22
B23
B24
B25
B26
B27
B28
B29
B30
B31
B32
B33
B34
B35
B38
B39
C01
C02
C03
C04
D01
D02
D03
D04
D05
D07
D08
D09
D11
D13
D17
D18
D19
D22
E01
E02
F01
F02
F03
F04
F05
F08
F10
F12
F15
F17
F21
F22
F24
F31
F32
F33
F37
F43
F44
F45
F47
F48
F49
F52
F58
F60
F61
F62
F63
F64
F65
F66
F67
F73
F78
F79
F85
F86
F87
F88
F89
F90
F91
F93
F94
F95
F96
F97
H01
H02
H03
H04
H05
H06
T01
T02
T03
T04
T05
T08
T09
T11
T12
T13
T14
T15
T17
T18
T19
T20
T24
T25
T89
T91
T92
T93
T94
T95
T96
T97
T98
T99
Описание
| Error code: | A01 |
| Display: | A01-xxx Master Mis-Feed Pull Out Master Making Unit and Rewind Master Roll, then Reset Master in Place. |
| Description: | Master feed error |
| Causes: | 201 Master-positioning sensor does not go ON even after the write pulse motor is activated during the master-positioning, master-cut, or master-loading operation. 202 Master-positioning sensor does not go OFF even when the write pulse motor is reversed during the master-positioning or at start of master-making operation. 211 Master-positioning sensor is ON during standby. 214 Master-positioning sensor is ON at the start of master making. 215 Faulty gate-array control for the write pulse motor (motor does not stop within set time). |
| Remedy: | Open the master-making unit and rewind the master material on the master roll, and then reset the master, or turn OFF the power and power back ON. |
| Error code: | A02 |
| Display: | A02-xxx Master Loading Error Pull Out Print Cylinder and Discard Master. |
| Description: | Master loading error |
| Causes: | 509 Master-loading sensor was OFF when the master was checked at a specified drum angle during the master-loading operation. |
| Remedy: | Pull out the print cylinder and set it back. |
| Error code: | A04 |
| Display: | A04-xxx Master Disposal Error Pull Out Print Cylinder and Discard Master. |
| Description: | Master disposal error |
| Causes: | 303 Check Print Drum - Master disposal error / Master disposal jam. |
| Remedy: | Pull out the print drum and push it back in. |
| Error code: | A05 |
| Display: | A05-xxx Master Jammed in Disposal Unit Pull Out Master Disposal Box and Remove Jammed Master |
| Description: | Master present in the master disposal area |
| Causes: | 304 Master disposal jam sensor was ON at the completion of the master disposal. 312 Master disposal jam sensor was ON at the start of the master making. 315 Master disposal jam sensor was ON after the completion of the recovery movement. |
| Remedy: | Pull out master disposal box and place it back after removing the jammed master in the master disposal area, or turn OFF the power and power back ON. |
| Error code: | A06 |
| Description: | Check paper feed tray |
| Causes: | 403 Either the upper or lower safety switch of the paper-feed-tray is OFF. Note: This detection is not made when the machine is in low-power-mode (24V OFF). |
| Remedy: | Change the condition of the paper-feed-tray upper/lower safety switches to ON condition, or turn OFF the power and power back ON. |
| Error code: | A07(J) |
| Description: | Paper-feed error |
| Causes: | 409 The Paper ejection sensor was OFF when the paper should have arrived, and the Paper sensor was ON when the machine stopped (Paper misfeed). 412 The Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed). 413 The Paper sensor was still ON (detecting paper) when the paper should have went out from the sensor. 418 The Paper sensor was ON at the start of machine operation when the START button was pressed. 429 Paper feed error (recovery error). 432 The Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed. |
| Remedy: | 1. Check the paper feed side and remove the jammed paper. 2. Reload printing paper. 3. Press the <RESET> key if error display does not clear. When using special paper, adjust the Paper Feed Pressure Adjustment Lever according to the paper characteristics. |
| Error code: | A08(J) |
| Description: | Paper jam on print drum |
| Causes: | 410 The Paper ejection sensor was OFF when paper should have arrived, and the Paper sensor was OFF when the machine stopped (paper jam on the print drum). 430 Paper jam on the Print drum (recovery error). |
| Remedy: | Pull out the Print Drum. Remove the jammed paper. <Do not touch the separation hook or master removal hook when putting your hand into the unit to remove paper. The sharp tips of the hooks can hurt your hand.> |
| Error code: | A09(J) |
| Description: | Paper-ejection error |
| Causes: | 411 The Paper ejection sensor was ON when the paper should have left the Paper ejection sensor. 417 The Paper ejection sensor was ON at the start of machine operation when the START button was pressed. 431 The Paper ejection error (recovery error). |
| Remedy: | Check for any jammed paper on the paper exit area. When using special paper, adjust the Paper Arranger on the Receiving Tray Paper Guides according to the paper characteristics. |
| Error code: | A10(J) |
| Description: | AF original feed error |
| Causes: | 102 The original is pulled out from the AF unit before the scanning is completed. 103 Original jammed at the AF registration sensor. (The AF registration sensor does not go OFF after the AF read sensor goes ON) 105 Original jammed at AF read sensor. (The AF read sensor does not go OFF after the AF registration sensor goes OFF) 106 Original jammed at AF original ejection sensor. (The AF original ejection sensor does not go OFF after the AF read sensor goes OFF) 107 The Original does not arrive to the AF registration sensor. 108 The Original does not arrive to the AF read sensor. 109 The Original does not arrive to the AF original ejection sensor. (The AF original ejection sensor does not go ON after the AF read sensor goes ON) 169 The AF feed cover is opened due to original jam, while originals are present on the tray. |
| Remedy: | Pull the AF Original Release Lever (Option) to the right, and remove the original. Raise the Platen Cover, turn the AF Original Release Dial and remove the original. |
| Error code: | A16 |
| Display: | A16-xxx Master Remains on Print Cylinder (Drum) Pull Out Print Cylinder and Remove Master |
| Description: | Waiting for the master to be removed from the drum |
| Causes: | 525 Waiting for the master to be removed from the print cylinder (drum). |
| Remedy: | Pull out the print cylinder (drum), remove the master around it and insert it back. |
| Error code: | A17 |
| Display: | A17-xxx System Error in Master Making Unit Take Out Master and then Close Master Making Unit Cover |
| Description: | Cutter error |
| Causes: | 209 Cutter HP switch is OFF when master-making starts, when the master material is set in the master making unit, or when the machine goes into idle condition. |
| Remedy: | Open the Master making unit, remove the master and close the master making unit. |
| Error code: | A34 |
| Display: | A34-xxx Master Not Set in Place Insert Lead Edge of Master into Master Entrance and Close Master Making Unit |
| Description: | Requesting for the master to be reset |
| Causes: | 218 Reqesting for the master material to be reset into the master making unit. |
| Remedy: | Open the Master making unit, re-insert the master material into the master making unit. |
| Error code: | B01 |
| Description: | Keycard counter: No card |
| Causes: | 730 Keycard counter: No card O O |
| Remedy: | Insert card. |
| Error code: | B02 |
| Description: | Sorter error - Serviceman Call |
| Causes: | 702 Serviceman call error command was received from the sorter. |
| Remedy: | Check the sorter. |
| Error code: | B03 |
| Description: | Sorter error - Jam |
| Causes: | 703 Received paper jam error command was received from the sorter. |
| Remedy: | Remove the jammed paper. |
| Error code: | B04 |
| Description: | Sorter error - Door open |
| Causes: | 707 Cover open error cmmand was received from the sorter. |
| Remedy: | Close the sorter cover. |
| Error code: | B05 |
| Description: | Soter Error - Other errors |
| Causes: | 709 Other error command was received from the sorter. |
| Remedy: | Check the sorter. |
| Error code: | B21 |
| Display: | B21-Duplex Area Jam |
| Description: | Paper did not exit the transport area correctly, causing a paper jam. Open Cover B and refer to the labels on the printer to clear the jam. |
| Causes: | 714 File name error on the Hold Memory. 715 Access error on the Hold Memory. 716 Other error on the Hold Memory. |
| Remedy: | 1. Ensure the correct weight and type of paper is loaded in the currently used tray. Also ensure the paper is loaded correctly in the tray. 2. Clean the duplex unit’s rollers. 3. Test the duplex motor and clutch as described in “Motor and clutch tests”. Replace the duplex unit. 5. Replace the engine controller board. |
| Error code: | B22 |
| Display: | B22-xxx !! Job Separator is OFF !! Turn On Power Switch of it |
| Description: | Job separator: Power off |
| Causes: | 721 With the [Tape separation] function set ON, no power is supplied to the job separator when start key is pressed. 727 After cluster-A signal turned ON, BUSY-signal stayed [L] more than 7 seconds (power to job separator was turned OFF while the tape is being ejected. |
| Remedy: | Press Reset Key and check and switch ON the power of Job Separator. |
| Error code: | B23 |
| Display: | B23-xxx No Paper Tape in Job Separator Replace Tape Roll |
| Description: | Job separator: No tape |
| Causes: | 722 With the [Tape separation] function set ON, no tape detected in the job separator when the start key is pressed. 723 No tape remains in job separator upon completion of the tape-ejection operation. |
| Remedy: | Press Reset Key and set paper tape in Job Separator. |
| Error code: | B24 |
| Display: | B24-xxx Paper Tape Jam in Job Separator Remove Paper Tape |
| Description: | Job separator: Tape jam |
| Causes: | 724 Tape jam detected when the start key is pressed with the [Tape separation] function set to ON. 725 The tape-jam detection signal is [H] for more than 1.2 seconds after cluster-A signal turns ON (tape misfeed). 726 Job separator tape-jam detection signal is [L] when the BUSY signal changes from [L] to [H] (or after 7 sec. at [L]) after the cluster-A signal goes ON (tape misfeed). |
| Remedy: | Press Reset Key and remove the jammed tape. |
| Error code: | B25 |
| Description: | Sorter - Tray Full Error |
| Causes: | 704 Sorter tray full. |
| Remedy: | Remove papers from the sorter tray. |
| Error code: | B26 |
| Description: | Sorter - Paper Remaining on the Tray |
| Causes: | 705 Paper remaining on the sorter tray. |
| Remedy: | Remove paper from the sorter tray. |
| Error code: | B27 |
| Description: | Sorter - Stapler Error |
| Causes: | 706 Stapler error command is received from the sorter. |
| Remedy: | Check the stapler and correct the stapler problem. |
| Error code: | B28 |
| Description: | Sorter - paper Size Error |
| Causes: | 708 Paper size error command was received from the Sorter. |
| Remedy: | Remove paper from the sorter tray. |
| Error code: | B29 |
| Description: | USB Memory: No compatibility (w/ USB HUB) |
| Causes: | 926 The USB hub connected to this machine. |
| Remedy: | Connect the correct corresponding USB Flash Drive. |
| Error code: | B30 |
| Description: | USB Memory: No compatibility |
| Causes: | 910 Unrecognized USB device connected to this machine. |
| Remedy: | Connect the correct corresponding USB Flash Drive. |
| Error code: | B31 |
| Display: | B31-xxx !! No Linked Printer Detected !! Check Cable Connection and Power Supply for Linked Printer |
| Description: | Network cable not connected |
| Causes: | 916 Network cable is not connected when the machine is powered ON. |
| Remedy: | Press Reset Key and connect the network cable. |
| Error code: | B32 |
| Display: | B32-xxx !! No Linked Printer Detected !! Check Cable Connection and Power Supply for Linked Printer |
| Description: | NIC - Communication error |
| Causes: | 914 MIB (Management Informtion Base) request error 915 MIB no reply 917 Communication error on the network. 920 Error detected by Network Interface Card (NIC) - NAK (negative acknowledgement was received). |
| Remedy: | Press Reset Key, and check the network cable and linked printer. |
| Error code: | B33 |
| Display: | B33-xxx No IP Address Assigned to This Printer Contact Your Network Administrator |
| Description: | IP address set up error |
| Causes: | 931 DHCP is ON, but DHCP server is not found. |
| Remedy: | Press Reset Key, and enter the IP address. |
| Error code: | B34 |
| Description: | Linked Printer Error (RZ3) [Linked Printer - No Toner Error] (RZ5 & RZ9) |
| Causes: | 919 Error on the linked printer. 919 No toner in the linked printer. |
| Remedy: | Press [Reset] Key and correct the error on the linked printer (RZ3). Press [Reset] Key and replace the toner on the linked printer (RZ5 & RZ9). |
| Error code: | B35 |
| Description: | Linked Printer: Call Service Error |
| Causes: | 970 Error in the linked printer. |
| Remedy: | Press Reset Key, and correct the error on the linked printer. |
| Error code: | B38 |
| Description: | USB Memory: Fault create a file |
| Causes: | 911 Fail to create RISO folder |
| Remedy: | Press the <RESET> Key, and disconnect USB flash drive. |
| Error code: | B39 |
| Description: | USB Memory: No access |
| Causes: | 999 Detects device error |
| Remedy: | Press the <RESET> Key, and disconnect USB flash drive. |
| Error code: | C01 |
| Display: | C01-xxx No Ink Replace Ink Cartridge |
| Description: | Main motor is abnormal |
| Remedy: | Is the main motor working? NO 1. Check if the connector CN1 of the main motor is disconnected. 2. Check if the connector J313 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circutied. 4. Check if the conductor patterns on the main motor board and LGC board are short- or open-circuited. 5. Replace the main motor. 6. Replace the LGC board. YES Is the LED on the main motor board lit without flickering? NO 1. Check if the connector pins are disconnected and the harnesses are open-circuited. 2. Check if the conductor patterns on the main motor board and LGC board are short- or open-circuited. 3. Replace the main motor. 4. Replace the LGC board. YES 1. Check if the PLL lock signal J313-11 output from the LGC board is always level “L”? 2. Check if the voltage supplied to the microcomputer input terminal IC10-7 is always “L”? 3. Replace the LGC board. |
| Error code: | C02 |
| Display: | C02-xxx No Master Replace Master Roll |
| Description: | Replace master roll |
| Causes: | 200 The master end was detected twice in succession at 10-milliseconds intervals during master transport. 240 Master remaining amount is zero from the RF-Tag information. 253 Masterless error was detected twice consecutively on one same master-roll. |
| Remedy: | Remove the empty master roll and replace with a new one. |
| Error code: | C03 |
| Display: | C03-xxx Master Disposal Box is Full Empty Master Disposal Box |
| Description: | Master disposal box full |
| Causes: | 308 Compression detection position was reached before the master-compression-motor encoder-sensor count reached the specified level, after the master compression motor turned ON in the compressing direction. |
| Remedy: | Remove master disposal box from the machine, throw away the disposed master from the disposal box and return the disposal box in the machine after an interval of over 5 seconds. |
| Error code: | C04 |
| Display: | C04-xxx Add Paper |
| Description: | Abnormal feed motor |
| Causes: | 402 Paper detection sensor is OFF (not detecting paper). |
| Remedy: | Is the PFP motor working? (Perform the output check in the test mode: 03-125/175) NO 1. Check if the signal line connector of the feed motor is disconnected. 2. Check if the connector J327 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor patterns on the feed motor board and LGC board are short- or open circuited. 5. Replace the feed motor. 6. Replace the LGC board. YES Is the LED on the feed motor board lit without flashing? NO 1. Check if the connector pins are disconnected and the harnesses are open-circuited. 2. Check if the conductor patterns on the feed motor board and LGC board are short- or open-circuited. 3. Replace the feed motor. 4. Replace the LGC board. YES Replace the LGC board. |
| Error code: | D01 |
| Display: | D01-xxx Set Print Cylinder (Drum) in Place |
| Description: | Print drum not set |
| Causes: | 526 Print drum is not set in the machine (drum connection signal, drum safety switch, and drum-lock sensor is OFF. 527 Print drum connection signal is OFF when the print drum was inserted in the machine. 528 Print drum safety switch is OFF when the print drum was inserted in the machine. 529 Print drum lock sensor is OFF when the print drum was inserted in the machine (time-out: 5 seconds). 530 Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum was pulled out. |
| Remedy: | Set the print drum in the machine. |
| Error code: | D02 |
| Display: | D02-xxx Wrong-Type Print Cylinder Installed Replace with Correct Type |
| Description: | Incorrect print drum |
| Causes: | 532 Incorrect print drum is used. 580 Incorrect print drum is used. |
| Remedy: | Set correct print drum in the machine. |
| Error code: | D03 |
| Display: | D03-xxx Install Ink Cartridge |
| Description: | Ink cartridge not set |
| Causes: | 533 Bottle set switch is OFF. |
| Remedy: | Install ink cartridge in the print drum. |
| Error code: | D04 |
| Display: | D04-xxx Wrong-type Ink Cartridge Installed or Cannot Read Ink Info Replace Ink Cartridge or Contact dealer/Riso office |
| Description: | Incorrect ink cartridge |
| Causes: | 534 Incorrect ink cartridge is used. 560 Ink RF-Tag is not detected on ink bottle. 561 Ink RF-Tag communication error (communication with the ink cartridge was interfered by noise). 562 Wrong ink cartridge information on the Ink RF-Tag. 564 Detected a mismatch in the Ink RF-Tag. 575 RF-Tag software error. |
| Remedy: | Replace with correct ink cartridge. |
| Error code: | D05 |
| Display: | D05-xxx Set Master in Place |
| Description: | Master not set |
| Causes: | 210 Master detection sensor is OFF (not detecting master material). |
| Remedy: | Insert leading edge of the master material into the master entrance and close the master making unit. |
| Error code: | D07 |
| Display: | D07-xxx Set Master Disposal Box in Place |
| Description: | Master disposal box not set |
| Causes: | 310 Master disposal box safety switch is OFF. (Does not detect the error during low-power mode in which 24V power is down) |
| Remedy: | Set master disposal box in the machine. |
| Error code: | D08 |
| Display: | D08-xxx Set Master Making Unit in Place |
| Description: | Master making unit not set |
| Causes: | 224 Master making unit is not set (both the safety switch and lock sensor are OFF). 226 Master making unit safety switch is still OFF when the master making unit is set in position. 227 Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds). 228 Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit was pulled out of the machine. |
| Remedy: | Insert the master making unit in the machine. |
| Error code: | D09 |
| Description: | Master making unit cover is not closed |
| Causes: | 212 Master making unit cover set sensor is OFF. |
| Remedy: | Close the master making unit cover. |
| Error code: | D11 |
| Description: | Front cover not closed |
| Causes: | 535 Front cover set sensor is OFF. |
| Remedy: | Close the front cover of the machine. |
| Error code: | D13 |
| Display: | D13-xxx Rear Cover of Main Body is Off Call Service |
| Description: | Rear cover not closed |
| Causes: | 009 The rear cover is opened (serviceman safety switch is OFF). |
| Remedy: | Close the rear cover of the machine to activate the rear cover (serviceman safety) switch. [Field serviceman has to close and screw-on the rear cover] |
| Error code: | D17 |
| Display: | D17-xxx Wrong-type Master Installed or Cannot Read Master Info Replace Master Roll or Contact dealer/Riso office |
| Description: | Incorrect master roll |
| Causes: | 236 Incorrect master roll. 237 Master roll RF-Tag not detected. 238 Master roll RF-Tag communication error. (Communication interrupted by noise) 239 Incorrect information on the Master roll RF-Tag. 241 Mismatch in the Master roll RF-Tag information. 256 Master roll RF-Tag software error. |
| Remedy: | Set correct master roll in the machine. |
| Error code: | D18 |
| Description: | Print cylinder (drum) is ready for removal |
| Causes: | 522 Print Cylinder (Drum) is unlocked for its removal. (Drum lock Solenoid is ON). |
| Remedy: | Pull out the print Cylinder (Drum). |
| Error code: | D19 |
| Description: | Master making unit is ready for removal |
| Causes: | 223 Master making unit is unlocked for its removal. (Lock Solenoid is ON). |
| Remedy: | Pull out the master making unit. |
| Error code: | D22 |
| Description: | Print cylinder (drum) removal command |
| Causes: | 540 Cannot access to the EEPROM on the print drum PCB. 542 Print drum PCB EEPROM data error. |
| Remedy: | Pull out print cylinder (drum) from the machine. |
| Error code: | E01 |
| Description: | Paper leading edge not reaching the exit sensor |
| Remedy: | Is the fuser motor rotating? Y: Is the harness between the LGC board and the exit sensor open-circuited? Is the connector of the paper exit sensor or the connector J123 on the LGC board disconnected? Y: Reconnect the connector. Replace the harness. N: 1. Replace the exit sensor. 2. Replace the LGC board. N: Is the harness between the LGC board and the paper exit sensor open-circuited? Is the fuser motor connector or the connector J122 on the LGC board disconnected? Y: Reconnect the connector. Replace the harness. N: 1. Replace the fuser motor. 2. Replace the LGC board. Where was the paper stopped? Near the exit sensor (paper not damaged) Are the registration seRemove the paper after the fuser unit cools down.nsor and paper exit sensor functioning properly? (Does the actuator return normally?) Y: 1. In the tRemove the paper after the fuser unit cools down.est mode (03) check if each sensor is functioning. 2. Reconnect each sensor connector. N: Repair the actuator if it has come off. Before reaching the fuser unit Did the paper stop, curling upward excessively? Y: Replace the paper in the cassette. From the transfer belt surface to the exit sensor Do the size of paper and the size set match? N: Make the sizes match. Y: Is the transfer belt moving? Is the black drum motor or the transfer belt motor stopped? Or is any abnormal noise heard from one of them due to loss of synchronism? Y: 1. Reduce the mechanical load by adjusting the drive system. Remove any foreign matter. 2. Check the motor connector, and the connector J130 on the LGC board. 3. Replace the motor. 4. Replace the LGC board. No paper found Is the paper attached to the fuser belt? Remove the paper after the fuser unit cools down. |
| Error code: | E02 |
| Display: | E02-xxx !!Maintenance!! Call Service |
| Description: | Paper trailing edge not passing the exit sensor |
| Remedy: | Is the fuser motor rotating? Y: Is the harness between the LGC board and the exit sensor open-circuited? Is the connector of the paper exit sensor or the connector J123 on the LGC board disconnected? Y: Reconnect the connector. Replace the harness. N: 1. Replace the exit sensor. 2. Replace the LGC board. N: Is the harness between the LGC board and the paper exit sensor open-circuited? Is the fuser motor connector or the connector J122 on the LGC board disconnected? Y: Reconnect the connector. Replace the harness. N: 1. Replace the fuser motor. 2. Replace the LGC board. Where was the paper stopped? Near the exit sensor (paper not damaged) Are the registration seRemove the paper after the fuser unit cools down.nsor and paper exit sensor functioning properly? (Does the actuator return normally?) Y: 1. In the tRemove the paper after the fuser unit cools down.est mode (03) check if each sensor is functioning. 2. Reconnect each sensor connector. N: Repair the actuator if it has come off. Before reaching the fuser unit Did the paper stop, curling upward excessively? Y: Replace the paper in the cassette. From the transfer belt surface to the exit sensor Do the size of paper and the size set match? N: Make the sizes match. Y: Is the transfer belt moving? Is the black drum motor or the transfer belt motor stopped? Or is any abnormal noise heard from one of them due to loss of synchronism? Y: 1. Reduce the mechanical load by adjusting the drive system. Remove any foreign matter. 2. Check the motor connector, and the connector J130 on the LGC board. 3. Replace the motor. 4. Replace the LGC board. No paper found Is the paper attached to the fuser belt? Remove the paper after the fuser unit cools down. |
| Error code: | F01 |
| Display: | F01-xxx No Master on Print Cylinder (Drum) Make a New Master |
| Description: | • No master is detected on the print drum at the start of printing. |
| Causes: | • No master is detected on the print drum at the start of printing. |
| Remedy: | The warning display can be cleared by any of the following: • Press the <STOP> key. • Press the <RESET> key. |
| Error code: | F02 |
| Description: | Master image larger than paper size: 1 |
| Causes: | 018 Paper size does not match with the image size on the print drum at the start of printing. The paper size is smaller than the image size on the master. |
| Remedy: | Press [OK] or [Cancel] button. Also check the paper size. |
| Error code: | F03 |
| Description: | Multi-up printing - Incorrect paper size |
| Causes: | 016 Tried to make multi-up printing with incorrect paper size. |
| Remedy: | Press reset key and place correct size papers on the paper feed tray. |
| Error code: | F04 |
| Description: | Original not set |
| Causes: | 013 The original was not set when multi-page mode was started. |
| Remedy: | Set original. |
| Error code: | F05 |
| Display: | F05-xxx Enter Print Quantity Over The Programmed Minimum Value |
| Description: | Print quantiy under Minimum Print Quantity |
| Causes: | 019 In master making, the print quantity selected is less than the minimum print quantity. |
| Remedy: | Enter print quantity value over the programmed minimum value. |
| Error code: | F08 |
| Description: | Auto Tray - Paper Size and Original Size does not Match |
| Causes: | 017 When the Auto-Tray is selected, the original size (scanning ratio) and the printing paper set on the tray(s) did not match. |
| Remedy: | Press CANCEL button, and check the paper and original size. |
| Error code: | F10 |
| Description: | HDD formatting error |
| Causes: | 021 Paper size does not match with the size of image on the print drum when test print is selected and activated. |
| Remedy: | (1) Format the HDD. (Enter "2" into 08-690) (2) Check if the HDD is mounted. (3) Check if the specified HDD is mounted. (4) Check if the connector pins of the HDD are bent. (5) Check if the power supply connector is disconnected. (6) Check if the connector J144 on the SYS board is disconnected. (7) Replace the HDD. (8) Replace the SYS board. (9) Replace the harness. * When changing a HDD, do the following operations after replacing a new one. 1. Formatting of the HDD <Procedure> (1) Turen ON the power while the digital keys [0] and [8] are pressed simultaneously. (2) Confirm that "Test Mode" is displayed on the control panel. Enter the code "690" and press the [START] key. The display changes to "System Mode". (3) Enter "2" and press the [SET] or [INTERRRUPT] key. (4) [WAIT] is displayed. (5) Turn OFF the power after the message [REBOOT THE MACHINE] is displayed. 2. Downloading of the UI data |
| Error code: | F12 |
| Description: | Communications error between system-CPU and scanner-CPU |
| Causes: | 024 Irregular size original was used when Auto-Tray was selected. |
| Remedy: | Did the error occur immediately after updating the firmware? Y: Are the proper files saved in the PC? (In case of updating by PC) Are the type, attaching position and direction of the ROM correct? (In case of updating by download jig) N: After correcting, perform the firmware updating again. N: 1. Check if the IMG board connector J161 is disconnected. 2. Check if the SCM board connector J1 is disconnected. 3. Check if the harness between the IMG and SCM boards is open-circuited. 4. Check if the IMG board is securely connected to the MTH1 board. 5. Check if the SYS board is securely connected to the MTH1 board. 6. Check the version of FROM on the SYS board. 7. Check the version of FROM on the SCM board. 8. Check the scanner related setting values (08-360 and 361). 9. Replace the SYS board. 10. Replace the IMG board. 11. Replace the SCM board. |
| Error code: | F15 |
| Description: | Paper size does not match with the paper on the paper receiving tray |
| Causes: | 042 With the auto-control-paper-receving-tray connected, the paper on the receiving tray is larger than the printing paper. |
| Remedy: | Press [CANCEL] button |
| Error code: | F17 |
| Description: | Print cylinder (drum) size does not match |
| Causes: | 027 Different size print cylinder (drum) from the previous is set. |
| Remedy: | Select the same drum as specified, or install the same drum installed previously. |
| Error code: | F21 |
| Display: | F21-xxx |
| Description: | Next Original not set on AF for Multi-Up |
| Causes: | 032 Next original is not set on AF whe multi-up is selected. |
| Remedy: | Set original on the AF. Or press STOP key (time-out exists for pressing the STOP key). |
| Error code: | F22 |
| Description: | Next Original not placed on FB for Multi-Up |
| Causes: | 033 Next Original not placed on FB for Multi-Up scanning. |
| Remedy: | Set origial on the FB and press START key. Or press STOP key (Time-out exists for pressing the STOP key) |
| Error code: | F24 |
| Description: | Auto Reproduction Size Selection Not Possible |
| Causes: | 037 The reproduction ratio does not match. |
| Remedy: | Press [STOP] key |
| Error code: | F31 |
| Description: | Modem IC does not work normal |
| Causes: | 836 HP sensor did not go ON when the side fences made initial home position movement. 837 HP sensor did not go OFF when the side fences should have left home position. 838 HP sensor did not go ON when the end fence made initial home position movement. 839 HP sensor did not go OFF when the end fence should have left home position. 868 Even though the End fence pulse motor ended its movement by the sensor detection, the sensor status does not match with the programmed status. 869 Even though the Side fence pulse motor ended its movement by the sensor detection, the sensor status does not match with the programmed status. 870 The End fence pulse motor does not stop either by its pulse count stop nor by sensor detected stop. 871 The Side fence pulse motor does not stop either by its pulse count stop nor by sensor detected stop. |
| Remedy: | Press either the {START] or [STOP] key. |
| Error code: | F32 |
| Description: | Storage Data - Storage Area Full |
| Causes: | 713 The DM-128 card became full while saving data. |
| Remedy: | Press [STOP] key |
| Error code: | F33 |
| Description: | Master image size / Drum size: Mismatch |
| Causes: | 047 The master size did not match the drum size when P-to-P master making was started. 048 The master size did not match the drum size when D-to-P master making was started. |
| Remedy: | Check the print drum size, or start making master by pressing the start key. |
| Error code: | F37 |
| Description: | Book mode: AF cannot be used |
| Causes: | 050 Original was set on the AF with book mode selected in master making. |
| Remedy: | Place original on the stage glass. |
| Error code: | F43 |
| Description: | Data printing / Paper size mismatch |
| Causes: | 902 Original size is larger than the paper size. |
| Remedy: | Check paper size, press Cancel or Continue key. |
| Error code: | F44 |
| Description: | Auto Reproduction Size - Error Between Original Size and Paper Size |
| Causes: | 901 Original size could not be detected (original size out of the specification). |
| Remedy: | Press [CANCEL] button. |
| Error code: | F45 |
| Description: | Original Undetected |
| Causes: | 954 Auto-tray or Auto-reproduction size is selected, and master making or print to linked printer is started with original undetected 959 Master making or print to a linked printer is started with original undetected. 981 The original not detected when [NEXT] button was pressed in Multi-Up Wizard display. |
| Remedy: | Reset the original in place. |
| Error code: | F47 |
| Description: | AF - card size reproduction not available |
| Causes: | 904 Reproduction size from A4 size reduced to card size is selected and the original is placed on the AF unit. |
| Remedy: | Remove original from AF and set it on the stage glass. |
| Error code: | F48 |
| Description: | Multi-Up - Wrong Original Size |
| Causes: | 955 During the multi-up operation, the original size was detected as customs size or out of specification. |
| Remedy: | Press [STOP] key. |
| Error code: | F49 |
| Description: | Multi-Up - No Original |
| Causes: | 989 The original was undetected when Multi-Up operation was selected for either one original or multi-original. |
| Remedy: | Press [STOP] key |
| Error code: | F52 |
| Description: | Printing from Linked Printer disabled - Printer data not received |
| Causes: | 912 Printing from linked printer disabled (Linked printer data not received). |
| Remedy: | Press the [CLOSE] button. |
| Error code: | F58 |
| Description: | Printing from Linked Printer Disabled - Initializing NET-C |
| Causes: | 927 Printing from Linked Printer disabled (NET-C/D being initialized). |
| Remedy: | Press the [CLOSE] button. |
| Error code: | F60 |
| Description: | [Printer-Auto-Selection disabled: Print quantity selected is 0 |
| Causes: | 929 Auto-printer-selection is disabled with print quantity selected as Zero. |
| Remedy: | Press either [OK] or [Cancel] button. |
| Error code: | F61 |
| Description: | Linked Printer - Wrong Paper Size |
| Causes: | 930 Original size does not match with the paper size set on the linked printer. |
| Remedy: | Press [CANCEL] button. |
| Error code: | F62 |
| Description: | Printer-Auto-Selection disabled - Linked printer error |
| Causes: | 956 Auto-printer-selection is disabled due to linked printer error. |
| Remedy: | Press [Cancel] button. |
| Error code: | F63 |
| Description: | Linked Printer - Auto Tray Selection not avaialble for Irregular Size Original |
| Causes: | 971 Auto-Tray-Selection was used in printing from the linked printer using irregular sized original. |
| Remedy: | Press [CANCEL] button |
| Error code: | F64 |
| Description: | Selected Function Not Available While Processing Print Data from PC |
| Causes: | 964 Scanning, Overlay, Digitizer or Hold function was selected while the printer is receving data from PC. |
| Remedy: | Press {CLOSE] button. |
| Error code: | F65 |
| Description: | Scan Mode - Auto Page Size Selection Not Available for Irregular Size Original |
| Causes: | 965 The auto-size (save data) selection at start of scanning is detected as original irregular in size. |
| Remedy: | Press [RESET] key. |
| Error code: | F66 |
| Description: | Linked printer saddle stitching is disabled |
| Causes: | 962 Specified tray does not have any A3 (Ledger), B4 (Legal), A4 (Letter) or A4L (Letter-L) when printing from linked printer with saddle stitching selected. |
| Remedy: | Press [Close] button. |
| Error code: | F67 |
| Description: | Linked printer saddle stitching is disabled |
| Causes: | 963 Specified size papers are not set in horizontal and vertical directions in the linked printer tray, when printing from linked printer with rotation sorting selected. |
| Remedy: | Press [Close] button. |
| Error code: | F73 |
| Description: | Linked Printer - Auto Tray Selection Not Available with Selected Reproduction Ratio |
| Causes: | 975 In Linked Printer printing, the detected original size does not match with the selected reproduction size. |
| Remedy: | Press [STOP] key. |
| Error code: | F78 |
| Description: | Editor - Stage Cover is Opened |
| Causes: | 731 The stage cover is opened during the digitizer operation. |
| Remedy: | Close the stage cover and press [CLOSE] button. |
| Error code: | F79 |
| Description: | Editor - No Original During Re-Scanning |
| Causes: | 732 The original was not detected during re-scanning. |
| Remedy: | Press [STOP] key |
| Error code: | F85 |
| Description: | External CI - Scanning Not Possible with External CI not Connected |
| Causes: | 995 Either the PS7R is not connected or improperly connect. |
| Remedy: | Press [CLOSE] button or press [START] key. |
| Error code: | F86 |
| Description: | Auto Tray Selection - Tray Cannot Be Selected with Selected Reproduction Ratio |
| Causes: | 864 With the Auto Tray selected, the master-making was activated with original size which does not match with the reproduction ratio against the printing paper. |
| Remedy: | Press [STOP] Key |
| Error code: | F87 |
| Description: | Auto Tray Selection - Mult-Up Not Possible |
| Causes: | 865 Multi-Up was chosen with Auto Tray selected. |
| Remedy: | Press [ENTER] button or [CANCEL] button. |
| Error code: | F88 |
| Description: | Auto Tray Selection - 2 UP Selection Error |
| Causes: | 866 With Auto Tray selected, the 2-UP was selected with printing papers other than A4R or B5R. |
| Remedy: | Press [STOP] key |
| Error code: | F89 |
| Description: | Interposer Mode - Wrong Paper Size |
| Causes: | 867 Interposer mode was selected with interposal paper smaller than the printing paper. |
| Remedy: | Press [STOP] key. |
| Error code: | F90 |
| Description: | Ink Supply Stock Inventory |
| Causes: | 957 Set quantity of the specified color ink stock quantity is equal to or less than the calculated stock quantity. |
| Remedy: | Press [CLOSE] button. |
| Error code: | F91 |
| Description: | Master Roll Supply Stock Inventory |
| Causes: | 958 Set quantity of the specified master roll stock quantity is equal to or less than the calculated stock quantity. |
| Remedy: | Press [CLOSE] button. |
| Error code: | F93 |
| Description: | Finisher Jog Motor Failure An error was detected in either the Front or Rear Alignment Motor. |
| Causes: | • Paddle Assembly • Alignment Motors |
| Remedy: | 1 Check the following for evidence of fault or damage: • Paddle Assembly • Alignment Motors Is there any damage? Replace any damaged parts. Go to Step 2. 2 Test the Alignment Plate Sensors. Run the Service Diagnostics Front and Rear Alignment Plate Sensor tests. Do the sensors function correctly? Replace the Paddle Assembly, Replace the sensor. |
| Error code: | F94 |
| Description: | Protect Mode - Discard Current Master |
| Causes: | 007 The protect function is active when machine power is turn ON, machine woke up from sleep, or print drum is inserted into the machine. |
| Remedy: | Press [START] key. |
| Error code: | F95 |
| Description: | Protect Mode - Confirmation |
| Causes: | 008 The job completes when the protect mode is selected active by the Admin. display. |
| Remedy: | Press [START] key, or press [STOP] key. |
| Error code: | F96 |
| Description: | Total Count Volume |
| Causes: | 918 The set date to count the used volume. |
| Remedy: | Press <CLOSE> button, <STOP> key or <RESET> key. |
| Error code: | F97 |
| Description: | Count Charge |
| Causes: | 928 The set date to add the count charge. |
| Remedy: | Press <CLOSE> button, <STOP> key or <RESET> key. |
| Error code: | H01 |
| Description: | General supply parameter input (first print drum) |
| Causes: | 566 Enter parameters, since first ink tag color information, steady-state viscosity information, and FP viscosity information are unreliable. |
| Remedy: | Enter the parameters and press the Start key. |
| Error code: | H02 |
| Description: | Print density fine adjustment |
| Causes: | 567 Enter the required parameter value. |
| Remedy: | Enter the required parameter value (1: Light to 5: Dark) [INK] |
| Error code: | H03 |
| Description: | Proof-print density adjustment (ink) |
| Causes: | 568 Enter the required parameter value. |
| Remedy: | Enter the required parameter value (1: Light to 5: Dark) [INK] |
| Error code: | H04 |
| Description: | General supply parameter input (master) |
| Causes: | 242 Enter parameters, since master tag sensitivity information, steady-state viscosity information, and FP viscosity information are unreliable. |
| Remedy: | Enter the parameters and press the Start key. |
| Error code: | H05 |
| Description: | Print density fine adjustment |
| Causes: | 243 Enter the required parameter value. |
| Remedy: | Enter the required parameter value (1: Light to 5: Dark) [MASTER] |
| Error code: | H06 |
| Description: | Proof-print density adjustment (master) |
| Causes: | 244 Enter the required parameter value. |
| Remedy: | Enter the required parameter value (1: Light to 5: Dark) [MASTER] |
| Error code: | T01 |
| Description: | Main motor lock |
| Causes: | 520 Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates. 520 Main motor lock detection due to main motor FG sensor count reduced to 50% of the set speed. (The detection is not made for the first 2 seconds from the main motor movement.) 521 B-positioning sensor status does not change even after 3,033 pulses after the main motor activates. 524 Clamp unit is not at the home position while the print drum is in operation (except during master disposal). 537 Print drum failed to stop at position B. 538 Print drum is not locked during operation. (Drum lock sensor: OFF) |
| Remedy: | Press Reset Key |
| Error code: | T02 |
| Description: | Elevator motor lock |
| Causes: | 400 Both the upper and lower limit sensors are ON at the same time. 401 Overload current was detected in the elevator motor. 404 The lower-limit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower-limit position. 405 The upper-limit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction. 406 The upper-limit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper-limit position. 407 The lower-limit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction. 408 The upper-limit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray. |
| Remedy: | Press Reset Key or turn OFF and ON the power. |
| Error code: | T03 |
| Description: | Clamp motor lock |
| Causes: | 500 Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement. 501 Clamp sensor B does not change within 1 second from the time the clamp motor operates in the forward direction. 502 Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction. 503 Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement. 504 At the start of Clamp plate open/close action, the detection sequence of clamp-sensors A & B are abnormal. 505 At the start of print drum Position-A compensation movement, the detection sequence of clamp-sensors A & B are abnormal. 506 At the start of Clamp unit Home-positioning movement, the detection sequence of clampsensors A & B are abnormal. 507 Clamp sensor A is ON after the clamp release action is completed. 508 Clamp sensor A is ON after the A-position compensating movement is completed. 545 Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor). |
| Remedy: | Press Reset Key |
| Error code: | T04 |
| Description: | Ink overflow |
| Causes: | 513 The overflow sensor is ON for a set number of times in succession during the 10- millisecond-interval overflow-sensor check. |
| Remedy: | Press Reset Key after correcting the ink overflow condition. (No ink on the ink overflow sensor.) |
| Error code: | T05 |
| Description: | Vertical print positioning pulse motor lock |
| Causes: | 603 The vertical-centering sensor does not switch ON even when the vertical-positioning pulse motor activated in the image-down direction for 5.0 seconds during vertical home positioning movement. 603 The vertical-centering sensor does not switch ON even when the vertical-positioning pulse motor activated in the image-down direction for 5.5 seconds during vertical home positioning movement. 603 The vertical-centering sensor does not switch ON even when the vertical-positioning pulse motor activated in the image-down direction for regulation time during vertical home positioning movement. 604 The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse motor activated in the image-up direction for 5.0 seconds during vertical home positioning movement. 604 The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse motor activated in the image-up direction for 5.5 seconds during vertical home positioning movement. 604 The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse motor activated in the image-up direction for regulation time during vertical home positioning movement. 605 Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does not correspond with the programmed position. (GA control error). 612 The print positioning key is pressed with vertical-print-position information undefined. 619 The vertical positioning motor does not end its operation within the set period during the recovery movement to rotate -98 pulses. 632 The vertical positioning motor does not end its operation within the set period in the pulse count stop mode, or in the sensor stop mode after the actuator is detected by the sensor. |
| Remedy: | Press Reset Key or turn the power OFF and ON. |
| Error code: | T08 |
| Description: | Communication error with CI |
| Causes: | 951 The file is not a correct RINC data. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T09 |
| Description: | Sorter error |
| Causes: | 003 Sorter communication error. 700 Sorter communication error: The /CTS does not change to LOW even after 3 seconds from power ON. 701 Sorter communication error: The machine status information is not received from the sorter even after 0.2 seconds from the initialization command. 712 Sorter communication error: The retry command was not received. 720 Sorter communication error: The retry command was not received twice consecutively. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T11 |
| Description: | Print pressure pulse motor lock |
| Causes: | 600 Print pressure HP sensor does not switch ON within 5 seconds after the print pressure pulse motor activated towards higher pressure during home positioning operation. 600 Print pressure HP sensor does not switch ON within 3.9 seconds after the print pressure pulse motor activated towards higher pressure during home positioning operation. 601 Print pressure HP sensor does not switch OFF within 5 seconds after the print pressure pulse motor activated towards lower pressure during home positioning operation. 601 Print pressure HP sensor does not switch OFF within 4.6 seconds after the print pressure pulse motor activated towards lower pressure during home positioning operation. 602 Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping position does not correspond with the programmed position. (GA control error). 614 Print pressure pulse motor does not complete its movement even after 7 seconds from the print pressure HP movement to move -1000 pulses. 614 Print pressure pulse motor does not complete its movement even after 1.2 time the set period passed from the print pressure HP movement to move -1000 pulses. 631 The print pressure pulse motor does not end its operation within the set period in the pulse count stop mode, or in the sensor stop mode after the actuator after the actuator is detected by the sensor. |
| Remedy: | Press Reset Key or turn the power OFF and ON. |
| Error code: | T12 |
| Description: | Master disposal area motor lock |
| Causes: | 300 Overload current was detected in the master disposal motor. 301 Master compression motor lock when moving compression plate up. 305 Master compression sensor does not go ON within 6.5 seconds after the master compression motor operates in the return direction. 305 Master compression sensor does not go ON within 7.5 seconds after the master compression motor operates in the return direction. 306 Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction. 307 Master compression plate maximum position is not detected within 6.5 seconds after the master compression motor operates in the compress direction. 307 Master compression plate maximum position is not detected within 7.5 seconds after the master compression motor operates in the compress direction. 309 The FG sensor status on the master compression motor does not change even after 2 seconds from the motor activation. 309 Master-compression-motor encoder sensor count did not change as the master compression motor activated in the compress direction and moved out from the home position. 309 The FG sensor status on the master compression motor did not change for 50 consecutive times during 10 millisecond polling. 316 Master-compression-motor encoder sensor count did not change within 10 milliseconds after the master compression motor activated. 316 The master-disposal-motor FG sensor count dropped to 50% of the set speed. (The speed check starts 2 seconds after the activation of the motor.) |
| Remedy: | Press Reset Key. |
| Error code: | T13 |
| Description: | Cutter motor lock |
| Causes: | 203 Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated. 204 Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated. 205 Master-positioning sensor is ON when the print drum rotates through the preset angle following master cutting. 222 Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started. |
| Remedy: | Press Reset Key. |
| Error code: | T14 |
| Description: | Flatbed error |
| Causes: | 112 The scanner HP sensor does not go OFF within given time. 113 The scanner HP sensor does not go ON within given time. 114 Incorrect main-unit data. 115 The scanner operation is not completed within the set time. 116 Timeout error for black shading compensation. 117 Timeout error for white shading compensation. 118 Software error 123 Offset adjustment not completed within set time. 124 Gain adjustment not completed within set time. 125 Offset adjustment not completed. 126 Gain adjustment not completed. 135 Malfunction detected during offset adjustment. 136 Malfunction detected during gain adjustment. 137 Malfunction detected during black shading compensation. 138 Malfunction detected during white shading compensation. 160 The scanner model information is missing. 170 Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with the programmed position. (GA control error). |
| Remedy: | Press Reset Key. |
| Error code: | T15 |
| Description: | AF error |
| Causes: | 100 AF original IN sensor adjustment error. 101 AF-EEPROM error. 110 ABC (auto-base-control) timeout. The original does not move from the ABC scanning position on the AF unit. 111 Operation command was made to the AF unit without 24 volts supplied to the AF unit. 130 Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit. 131 Riso printer received an undefined command from the AF unit. 132 Riso printer detected communication sequence error from the AF unit. 133 Communication error with AF unit (ACK, NAK, or receiving channel error). 134 Riso printer could not send command to the AF unit within the set time. 161 AF unit not connected. |
| Remedy: | Turn OFF and ON the power. |
| Error code: | T17 |
| Description: | Solenoid counter not connected |
| Causes: | 020 Solenoid counter is not connected. |
| Remedy: | Connect the solenoid counter. |
| Error code: | T18 |
| Description: | Drum-lock-solenoid lock |
| Causes: | 531 Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated. |
| Remedy: | Press Reset key |
| Error code: | T19 |
| Description: | Thermal-pressure motor lock |
| Causes: | 207 TPH pressure sensor does not go OFF within 2 seconds after the thermal-pressure motor activates in the decompressing direction, or during home positioning operation. 208 TPH pressure sensor does not go ON within 2 seconds after the thermal-pressure motor activates in the decompressing direction. 216 TPH pressure sensor does not go OFF within 2 seconds after the thermal-pressure motor activates in the compressing direction. 217 TPH pressure sensor does not go ON within 2 seconds after the thermal-pressure motor activates in the compressing direction. |
| Remedy: | Press Reset key |
| Error code: | T20 |
| Description: | Paper-ejection-section motor lock |
| Causes: | 414 Paper ejection wing HP sensor status does not change within set time after the paper ejection wing motor activated for the wing home position movement. 415 Paper-ejection-wing home sensor does not go OFF within 7 seconds after the paper ejection wing motor activates in the clockwise direction from the home position. 415 The paper ejection wing HP sensor does not change from OFF to ON even though the paper ejection wing pulse motor is activated for a given time. 416 Overload current was detected in the paper-ejection motor. 437 Paper-ejection encoder sensor status does not change within 10 milliseconds after the paper-ejection motor is activated. 437 The paper ejection motor FG sensor pulse count dropped to 50% of the set speed. (The detection starts 2 seconds after the paper ejection motor is activated.) 442 Even though the paper ejection pulse motor stopped after the sensor stop mode, the sensor detection status did not match with the programmed status, or the motor does not stop within the set time in the pulse count stop mode. 442 Though the paper ejection wing motor stopped correctly at the wing sensor position, the stopping position does not correspond with the programmed position (GA control error). 456 The paper ejection pulse motor does not end its operation within the set period in the pulse count stop mode, or in the sensor stop mode after the actuator is detected by the sensor. |
| Remedy: | Press Reset key |
| Error code: | T24 |
| Description: | Inking motor lock |
| Causes: | 539 Inking-motor FG sensor status does not change within 20 milliseconds after the inkingmotor is activated. |
| Remedy: | Press Reset key or turn the power OFF and ON. |
| Error code: | T25 |
| Description: | Replace Battery |
| Causes: | 026 Battery voltage is too low when the power is turned ON. (Readjust the machine clock after replacing the battery.) |
| Remedy: | Replace the battery. |
| Error code: | T89 |
| Description: | Master compression plate: incorrect position |
| Causes: | 350 The clamp unit is in the lowered position and the master compression plate is not in the HP position when the print drum starts its movement. (This is to protect the machine parts.) |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T91 |
| Description: | Panel EEPROM error |
| Causes: | 968 Panel EEPROM read error. 969 Panel EEPROM write error. 976 Panel EEPROM check-sum error. 977 Panel EEPROM verify error. |
| Remedy: | Press Reset Key |
| Error code: | T92 |
| Description: | Drum EEPROM write error |
| Causes: | 570 EEPROM on the print drum PCB is being accessed while the print drum is in releasing action from the machine. |
| Remedy: | Press Reset Key |
| Error code: | T93 |
| Description: | NET-C / NET-D hardware error |
| Causes: | 932 No reply from the NET-C or NET-D network interface card while accessing to the network interface card. 933 No response from NET-C for 90 seconds during NET-C initialization. 933 No response from NET-D for 90 seconds during NET-D initialization. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T94 |
| Description: | Call service error: TPH |
| Causes: | 225 TPH code does not match with the machine code when the power is turned ON with the master-making unit in operating position or when the master-making unit is inserted in operating position while the power is ON. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T95 |
| Description: | FRAM error |
| Causes: | 059 Machine serial-number information sent from SH-PCB does not match with the machine serial number information in the MCTL PCB. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T96 |
| Description: | Data not input |
| Causes: | 171 TPH resistance value not input. 172 Scanner adjustment not completed. 433 Paper size width potentiometer test-mode setting is not completed. 452 Too small difference between the 105mm and 297mm A/D data of the paper feed tray pape 569 Either the print drum color information or ink category information is still not input. 613 Print pressure data missing. 872 MTPF Tray-1 paper width potentiometer value is not input. 873 MTPF Tray-2 paper width potentiometer value is not input. 972 REv data storage area is not initialized. |
| Remedy: | Input the parameters using test mode. |
| Error code: | T97 |
| Description: | PC card access error |
| Causes: | 939 PC card access error: PC card not set. 940 PC card access error: PCMCIA card information error. 941 PC card access error: CF card device error. 942 PC card access error: Same file already exists. 943 PC card access error: Not formatted. 944 PC card access error: Media ID error. 945 PC card access error: Media error (cannot access the PC card). 946 PC card access error: Media error (not enough blank space available on CF card). 990 PC card access error: Specified file not found on the selected drive. 991 PC card access error: Accessed to the file not opened. 992 PC card access error: File information folder is already in use. 993 PC card access error: Incorrect setting on the readout address when sending data to the machine. 994 PC card access error: Unsuccessful file deleting. |
| Remedy: | Press Reset Key |
| Error code: | T98 |
| Description: | Hardware error |
| Causes: | 002 No reply from SH PCB. If SH PCB signal is detected at machine power ON, but if the PCB communication terminates and T98-069 error is detected, the error point is rewrote to this T98-002 error message. 005 Hardware error 006 FRAM check-sum error 025 Defective RF PCB (Unsuccessful initial communication with RF PCB). 034 Unable to write on EEPROM on the machine. (Cannot access EEPROM). 035 CRC error on EEPROM on the machine (Defective EEPROM data). 038 Information between the PCB and EEPROM does not match. 039 Incorrect EEPROM. 051 Communication error with the touch-panel controller. 053 Unsuccessful data readout from the Memory setting (program, mode, user paper). 054 Unsuccessful data writing of the Memory setting (program, mode, user paper). 055 Machine code number sent from SH PCB does not match with that from the Mechanical control PCB. 063 Test mode setting is beyond the adjustable range. 064 Communication error between SH PCB and MCTL PCB. 065 Communication error between SH PCB and MCTL PCB (01) - on MCTL PCB side. 067 Communication error between SH PCB and MCTL PCB (03) - on MCTL PCB side. 068 Communication error between SH PCB and MCTL PCB (04) - on MCTL PCB side. 069 Communication error between SH PCB and MCTL PCB (05) - on MCTL PCB side. 070 Communication error between SH PCB and MCTL PCB (06) - on MCTL PCB side. 071 Communication error between SH PCB and MCTL PCB (07) - on MCTL PCB side. 072 Communication error between SH PCB and MCTL PCB (08) - on MCTL PCB side. 073 Communication error between SH PCB and MCTL PCB (09) - on MCTL PCB side. 074 Communication error between SH PCB and MCTL PCB (10) - on SH PCB side. 075 Communication error between SH PCB and MCTL PCB (11) - on SH PCB side. 076 Communication error between SH PCB and MCTL PCB (12) - on SH PCB side. 077 Communication error between SH PCB and MCTL PCB (13) - on SH PCB side. 078 Communication error between SH PCB and MCTL PCB (14) - on SH PCB side. 079 Communication error between SH PCB and MCTL PCB (15) - on SH PCB side. 080 Communication error between SH PCB and MCTL PCB (16) - on SH PCB side. 081 Communication error between SH PCB and MCTL PCB (17) - on SH PCB side. 082 Communication error between SH PCB and MCTL PCB (18) - on SH PCB side. 083 Communication error between SH PCB and MCTL PCB (19) - on SH PCB side. 084 Communication error between SH PCB and MCTL PCB (20) - on SH PCB side. 098 Machine serial number information on EEPROM does not match with that of FRAM. 119 Defective image PCB (memory check error on the image processing IC). 120 Timeout on the scanner serial communication. 129 Defective scanner gate array PCB (memory check error on the gate array). 245 Timeout error on master transfer during master-making (related to Write pulse motor). 246 Timeout error on master transfer during master-making (related to Load pulse motor). 422 The light emittance from the Paper sensor (send) exceeded the maximum allowance during the Automatic Multiple Paper Feed Adjustment [paper sensor sensitivity adjustment] by Test Mode No.705. 423 The light emittance from the Paper sensor (send) exceeded the minimum allowance during the Automatic Multiple Paper Feed Adjustment [paper sensor sensitivity adjustment] by Test Mode No.705. 921 The USB controler chip is not responding when PC and printer is connected by USB cable. 934 Communication error between MCTL PCB and RF PCB. (on FR PCB side) 935 Communication error between MCTL PCB and RF PCB. (on MCTL PCB side) 937 Undefined serial number. 938 FRAM version down. 947 24V-A does not go ON. (Possible broken Fuse for 24V-A area). 948 24V-A does not go ON. (Possible broken Fuse for 24V-B area). 949 24V-A does not go OFF. 950 24V-B does not go OFF. 952 SH3M2 PCB flash memory check-sum error. 953 Unsuccessful writing on the SH3M2 PCB flash memory. 960 Unsuccessful readout from the SH3M2 PCB flash memory. 961 SH3M2 PCB flash memory unused. 978 Incorrect power ON command from MCTL PCB when machine power turned ON. 979 Abnormal flash memory setting on the SH3M2 PCB. 983 24V-C does not go ON. (Possible broken Fuse for 24V-C area). 984 24V-C does not go OFF. |
| Remedy: | Turn power OFF and ON. |
| Error code: | T99 |
| Description: | Software error |
| Causes: | 181 Timeout on Image processing time. 982 Wrong loader. |
| Remedy: | Turn power OFF and ON. |
