Riso RZ997
Рейтинг
Модули
Drive M echanism Area (1)
Drum Area (3)
Drive M echanism Area (2)
Master -Making Area (4)
Master -Making Area (3)
Drive M echanism Area (3)
Drum - Rail Area
Scanner Area (2)
Paper Receiving Tray Area
Paper - Feed Tray
Electric al Component Area (4)
Master -Making Area (2)
Electric al Component Area (2)
Auto Control S tacking Tray (1)
Scraper Area
Clamp Area
Elevator - Safety SW Area
Drum Area (2)
Auto Control S tacking Tray (2)
Separator Area
M ulti Tray P aper Feeder (7)
Exterior Cover Area
Auto Control S tacking Tray (3)
Electrical Component Area (1)
Roller System Area
Multi Tray P aper Feeder (3)
Electric al Component Area (3)
Stage Cover Area
Main Body Area
Multi Tray P aper Feeder (5)
Master-Removal Area (2)
Multi Tray P aper Feeder (4)
Suction Area
Master -Removal Area (3)
Multi Tray P aper Feeder (1)
Master -Making Area (1)
Drum Area (4)
Scanner Area (1)
Drum Area (1)
Master -Removal Area (1)
Детали Multi Tray P aper Feeder (5)
| Деталь: | Ver. Print Pos. Base Assy (3-23) |
| Парткод: | 045-75293-056 |
| Деталь: | Bracket Timing Roller |
| Парткод: | 045-15524-008 |
| Деталь: | Cover Paper Feed Drive |
| Парткод: | 023-15115-100 |
| Деталь: | *Print Positioning Base |
| Парткод: | 023-15034-208 |
| Деталь: | *Arm Front Ver. Print Pos. |
| Парткод: | 023-15104-303 |
| Деталь: | *Gear Boss Ver. Print Pos. |
| Парткод: | 045-15208-009 |
| Деталь: | *Gear M1X140X8 |
| Парткод: | 612-10051-006 |
| Деталь: | *Arm Rear Ver. Print Pos. |
| Парткод: | 023-15105-008 |
| Деталь: | *Gear M1X42+M1X28 |
| Парткод: | 612-80027-005 |
| Деталь: | *Spring Vertical Gear |
| Парткод: | 045-15066-000 |
| Деталь: | *Spring Collar |
| Парткод: | 045-15210-003 |
| Деталь: | *Sector Gear Ver. Print Position |
| Парткод: | 023-15068-005 |
| Деталь: | *Cover Ver. Print pos. Planet Gear |
| Парткод: | 023-15103-005 |
| Деталь: | *Gear M1X126X7.5 |
| Парткод: | 612-10050-000 |
| Деталь: | *Gear Base Block Vertical Gear |
| Парткод: | 045-15098-009 |
| Деталь: | *Timing Cam |
| Парткод: | 045-15056-004 |
| Деталь: | *Sector Cam |
| Парткод: | 023-15055-108 |
| Деталь: | *Idler Spring Vertical |
| Парткод: | 023-15070-000 |
| Деталь: | *Gear M0.8X36X10 |
| Парткод: | 612-10013-007 |
| Деталь: | *Gear M0.8X35+M0.8X15 |
| Парткод: | 612-81303-006 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Bracket Vertical Centering Sensor |
| Парткод: | 023-15116-000 |
| Деталь: | *Motor PM42L-048-ZVN5 |
| Парткод: | 490-33016-106 |
| Деталь: | *Wire Harness Ver. Pos. Motor |
| Парткод: | 045-53028-006 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 045-53001-000 |
| Деталь: | Bracket Ver. Print Pos. Base |
| Парткод: | 045-15118-000 |
| Деталь: | Cover Stay Paper Feed Drive |
| Парткод: | 045-15072-000 |
| Деталь: | Hook Bracket Print Pos. Base |
| Парткод: | 045-15117-003 |
| Деталь: | Gear Housing Timing Gear |
| Парткод: | 045-15522-005 |
| Деталь: | Timing Gear |
| Парткод: | 045-15523-001 |
| Деталь: | Cartridge Guide Assy(6-15) |
| Парткод: | 023-75123-056 |
| Деталь: | Bottle Stay |
| Парткод: | 023-17025-109 |
| Деталь: | Ink Distributor |
| Парткод: | 030-16404-003 |
| Деталь: | O Ring P10-2.4 |
| Парткод: | 640-60100-100 |
| Деталь: | Ground Plate Ink |
| Парткод: | 023-17254-000 |
| Деталь: | Sensor YAA81-0070P |
| Парткод: | 444-51004-104 |
| Деталь: | *Cartridge Guide Lower |
| Парткод: | 023-17155-100 |
| Деталь: | *Maintenance Cap |
| Парткод: | 023-17160-006 |
| Деталь: | *Bracket Ink Bottle Set SW |
| Парткод: | 023-17158-001 |
| Деталь: | *Bottle Catch |
| Парткод: | 023-17157-102 |
| Деталь: | *Bottle Set SW Assy |
| Парткод: | 023-17026-105 |
| Деталь: | *Shaft Rf-Tag Reader Drum |
| Парткод: | 023-17249-104 |
| Деталь: | *ARM RF-TAG Reader Holder Drum |
| Парткод: | 023-17248-108 |
| Деталь: | *Spring Rf-Tag Reader Drum |
| Парткод: | 023-17250-005 |
| Деталь: | *Holder RF-TAG Reader Drum |
| Парткод: | 023-17156-009 |
| Деталь: | *Cartridge Guide Upper |
| Парткод: | 023-17024-005 |
| Деталь: | RF-TAG Reader Drum |
| Парткод: | 444-59002-208 |
| Деталь: | Ink Pump Assy |
| Парткод: | 023-17145-104 |
| Деталь: | Wire Harness Drum Inner |
| Парткод: | 024-17172-001 |
| Деталь: | Air Damper Assy (31-43) |
| Парткод: | 045-75292-050 |
| Деталь: | Pressure Control Assy(1-10,12,13) |
| Парткод: | 023-75076-058 |
| Деталь: | *Base Bracket Pressure Control |
| Парткод: | 023-15023-109 |
| Деталь: | *Cover Plate Pressure Control |
| Парткод: | 023-15027-007 |
| Деталь: | *Worm Gear Pressure Control |
| Парткод: | 023-15030-008 |
| Деталь: | *Worm Shaft Pressure Control |
| Парткод: | 023-15029-107 |
| Деталь: | *Gear Pressure Control |
| Парткод: | 023-15028-003 |
| Деталь: | *Gear Shaft Pressure Control |
| Парткод: | 023-15025-101 |
| Деталь: | *Motor KH42JM2B173 |
| Парткод: | 490-31010-003 |
| Деталь: | *Wire Harness FB Pulse Motor |
| Парткод: | 023-53017-007 |
| Деталь: | *Bracket HP sensor Pressure Control |
| Парткод: | 023-15032-000 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 045-53006-002 |
| Деталь: | *Gear Wheel Pressure Control |
| Парткод: | 023-15031-004 |
| Деталь: | *Rotation Plate Pressure Control |
| Парткод: | 023-15033-104 |
| Деталь: | Pressure Spring 21 |
| Парткод: | 023-15018-008 |
| Деталь: | Noise Reduction Pressure Spring |
| Парткод: | 023-15019-004 |
| Деталь: | Bracket Pressure Control Assy |
| Парткод: | 045-15157-005 |
| Деталь: | Bracket Base Guide Roller Shaft |
| Парткод: | 045-15506-107 |
| Деталь: | Base Bracket Guide Roller Release |
| Парткод: | 023-15154-408 |
| Деталь: | Spring Guide Roller Release |
| Парткод: | 023-15063-100 |
| Деталь: | Guide Roller Lever |
| Парткод: | 023-15061-000 |
| Деталь: | Lever Plate Sector Gear |
| Парткод: | 023-15058-301 |
| Деталь: | Sector Gear |
| Парткод: | 023-15059-006 |
| Деталь: | Spring Sector Gear |
| Парткод: | 023-15060-209 |
| Деталь: | Hook Bracket Spring |
| Парткод: | 045-15504-201 |
| Деталь: | Spring ONE-WAY Hook |
| Парткод: | 024-15172-004 |
| Деталь: | Release Lever |
| Парткод: | 045-15508-002 |
| Деталь: | Solenoid TDS-08A-1030 |
| Парткод: | 490-50010-006 |
| Деталь: | Bracket 1st Transmission |
| Парткод: | 045-15501-008 |
| Деталь: | Gear M1X41+M1X29 |
| Парткод: | 612-82407-000 |
| Деталь: | GEAR M1X28X8 |
| Парткод: | 612-12208-107 |
| Деталь: | *Set Plate Adj. Valve |
| Парткод: | 045-15206-006 |
| Деталь: | *Cylinder Base Bracket Air Damper |
| Парткод: | 045-15204-003 |
| Деталь: | *Gear M1X80X10 |
| Парткод: | 612-10048-005 |
| Деталь: | *Timing Plate Air Damper |
| Парткод: | 045-15110-009 |
| Деталь: | *Arm Air Pump |
| Парткод: | 019-13511-103 |
| Деталь: | *Arm Shaft Air Pump |
| Парткод: | 019-13512-002 |
| Деталь: | *Piston Head ll Air Pump |
| Парткод: | 019-13516-105 |
| Деталь: | *O Ring 34-3.6 |
| Парткод: | 640-67340-009 |
| Деталь: | *Cylinder Valve Sheet Air Pump |
| Парткод: | 019-13518-000 |
| Деталь: | *Cylinder Valve ll Air Pump |
| Парткод: | 019-13517-004 |
| Деталь: | *Cylinder Air Pump |
| Парткод: | 023-21021-002 |
| Деталь: | *Spring Adj. Valve Air Blow |
| Парткод: | 023-21010-000 |
| Деталь: | *Adj. Valve Air Damper |
| Парткод: | 045-15211-000 |
| Деталь: | *Load Pulse Motor Assy |
| Парткод: | 023-75144-053 |
| Деталь: | *Master Guide Assy (31-40) |
| Парткод: | 023-75140-058 |
| Деталь: | *Cutter Unit |
| Парткод: | 023-75081-051 |
| Деталь: | *Shaft Holder Right |
| Парткод: | 030-16108-005 |
| Деталь: | *Shaft Holder Left |
| Парткод: | 030-16109-001 |
| Деталь: | *Shaft Drawer Connector M.-M Unit |
| Парткод: | 023-28076-104 |
| Деталь: | *Hook Shaft M.-M Unit |
| Парткод: | 023-28148-105 |
| Деталь: | *Upper Stay M.-M Unit |
| Парткод: | 023-28014-109 |
| Деталь: | *Guide Block M.-M. Unit Mount |
| Парткод: | 023-28367-001 |
| Деталь: | *M. Loading Roller A3 |
| Парткод: | 023-28046-108 |
| Деталь: | *Lock Ring 4 |
| Парткод: | 023-17197-007 |
| Деталь: | *Gear M0.8X13X5 |
| Парткод: | 612-10103-006 |
| Деталь: | *Shaft M. Loading Roller |
| Парткод: | 023-28044-105 |
| Деталь: | *Bracket De-Elect. Brush M Loading |
| Парткод: | 023-28405-108 |
| Деталь: | *De-Electricity Brush M Loading |
| Парткод: | 023-28415-006 |
| Деталь: | *Load Roller A3 |
| Парткод: | 023-28048-100 |
| Деталь: | *Guide Plate Stoker |
| Парткод: | 023-28051-004 |
| Деталь: | *Hook Spring Stoker Guide Plate |
| Парткод: | 023-28052-000 |
| Деталь: | *Holding Plate R Stoker Guide Plat. |
| Парткод: | 023-28194-107 |
| Деталь: | *Metal F8X10X8 12X1.5 |
| Парткод: | 607-15005-002 |
| Деталь: | *Gear M0.8X16X5 |
| Парткод: | 612-10104-002 |
| Деталь: | *FULCRUM PLATE MASTER STOCKER |
| Парткод: | 023-28383-104 |
| Деталь: | *Pressure Plate Write Roller |
| Парткод: | 023-28380-008 |
| Деталь: | *Fulcrum Lever Stoker |
| Парткод: | 023-28141-003 |
| Деталь: | *Solenoid TDS-09SL-59A |
| Парткод: | 490-50007-102 |
| Деталь: | *Damper 2G50-C-10HG |
| Парткод: | 610-00022-003 |
| Деталь: | *Bracket Gear Shaft M Loading |
| Парткод: | 023-28376-205 |
| Деталь: | *Gear M0.8X34X4 |
| Парткод: | 612-10106-005 |
| Деталь: | *Gear M0.8X16X4 |
| Парткод: | 612-10105-009 |
| Деталь: | **Bracket Load Pulse Motor |
| Парткод: | 023-28196-100 |
| Деталь: | **Motor PM42L-048-ZVS6 |
| Парткод: | 490-33015-100 |
| Деталь: | **Gear Mx0.5X89+M0.8X34 |
| Парткод: | 612-80019-002 |
| Деталь: | **Gear M0.8X36+M0.8X18 |
| Парткод: | 612-80018-006 |
| Деталь: | **Metal F6X8X4 10X1 |
| Парткод: | 607-10006-000 |
| Деталь: | **Cutter Guide Upper A3 |
| Парткод: | 023-28057-100 |
| Деталь: | **Cutter Guide Lower A3 |
| Парткод: | 023-28058-106 |
| Деталь: | **Shaft Stoker roller Upper A3 |
| Парткод: | 023-28184-101 |
| Деталь: | **M Transfer Roller Wide Width |
| Парткод: | 023-28190-209 |
| Деталь: | **M Transfer Roller Middle width |
| Парткод: | 023-28191-205 |
| Деталь: | **Shaft Load Roller Upper A3 |
| Парткод: | 023-28093-106 |
| Деталь: | **M Transfer Roller Short Width |
| Парткод: | 023-28192-201 |
| Деталь: | **Guide Master Loading |
| Парткод: | 023-28340-006 |
| Деталь: | **Sensor E-3674 |
| Парткод: | 444-39000-004 |
| Деталь: | **Cutter Unit(rotary) |
| Парткод: | 023-28421-200 |
| Деталь: | **Master Guide Plate A A3(D23) |
| Парткод: | 023-28327-204 |
| Деталь: | *Seal Pos. Leading Edge Of Master Pic |
| Парткод: | 023-28946-001 |
| Деталь: | *Stepped Screw F5X3 M3X3 |
| Парткод: | 635-10007-109 |
| Деталь: | *Cutter Cover |
| Парткод: | 023-28323-004 |
| Деталь: | *Cover Master Pos. Sensor |
| Парткод: | 023-28053-104 |
| Деталь: | *Master Set Guide Bar |
| Парткод: | 023-28317-004 |
| Деталь: | *Bracket Set sensor M.-M Upper |
| Парткод: | 023-28214-108 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *SENSOR ON-171-A8 |
| Парткод: | 444-33003-109 |
| Деталь: | *Wire Harness M Pos. Sensor |
| Парткод: | 023-28242-101 |
| Деталь: | *Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | *Write Roller Assy A3(25-27) |
| Парткод: | 023-75114-057 |
| Деталь: | *Master Roll Holder Assy A3(52-64) |
| Парткод: | 023-75137-057 |
| Деталь: | *Rear Frame M.-M Unit |
| Парткод: | 023-28092-207 |
| Деталь: | *Front Frame M.-M. Unit |
| Парткод: | 023-75165-050 |
| Деталь: | *Shaft Handle M-M |
| Парткод: | 023-28338-109 |
| Деталь: | *Handle M.-M. |
| Парткод: | 023-28070-009 |
| Деталь: | *Guide Handle M.-M. |
| Парткод: | 023-28343-005 |
| Деталь: | *Hook Left Handle M.-M. |
| Парткод: | 023-28206-105 |
| Деталь: | *Hook Right Handle M.-M. |
| Парткод: | 023-28071-102 |
| Деталь: | *Actuator plate M.-M. Set Sensor |
| Парткод: | 023-28207-004 |
| Деталь: | *Spring Hook M-M |
| Парткод: | 023-28072-001 |
| Деталь: | *Handle Stopper M.-M. |
| Парткод: | 023-28336-009 |
| Деталь: | *Stepped Screw F4X2.2 M3X4 |
| Парткод: | 635-17423-108 |
| Деталь: | *Spring Handle M-M |
| Парткод: | 023-28209-007 |
| Деталь: | *Positioning Pin Front M.-M |
| Парткод: | 023-28082-007 |
| Деталь: | *Bottom Stay M.-M Unit |
| Парткод: | 023-28013-200 |
| Деталь: | *Slide Guide 2 M.-M. |
| Парткод: | 023-28251-003 |
| Деталь: | *Reinforcement Plate M.-M. Frame |
| Парткод: | 023-28074-101 |
| Деталь: | *Lower Stay M.-Making |
| Парткод: | 023-28073-008 |
| Деталь: | *Reinforce Plate Lower M.-M. Unit |
| Парткод: | 023-28245-003 |
| Деталь: | *Master Roll Holder Bottom |
| Парткод: | 023-28124-109 |
| Деталь: | *Master Guide Roller |
| Парткод: | 023-28210-005 |
| Деталь: | *Box Stay M.-Making |
| Парткод: | 023-28015-008 |
| Деталь: | *De-Electricity Bar M.-M. A3 |
| Парткод: | 014-15011-004 |
| Деталь: | *Lower Bracket Master End Sensor |
| Парткод: | 023-28417-009 |
| Деталь: | *Sensor (Send) KH0854-00 |
| Парткод: | 444-42029-200 |
| Деталь: | **Write Roller D23-A3 |
| Парткод: | 023-28037-206 |
| Деталь: | **liner |
| Парткод: | 019-35025-208 |
| Деталь: | **Write Roller liner 3 |
| Парткод: | 023-28432-105 |
| Деталь: | *Bearing 6900ZZNR |
| Парткод: | 601-10228-000 |
| Деталь: | *Bracket Front Write Roller |
| Парткод: | 023-28342-106 |
| Деталь: | *Pulley P70-2Gt-5 |
| Парткод: | 611-90012-009 |
| Деталь: | *Bracket Rear Write Roller |
| Парткод: | 023-28341-002 |
| Деталь: | *Pressure Plate Write Roller |
| Парткод: | 023-28380-008 |
| Деталь: | *Stocker Roller A3 |
| Парткод: | 023-28045-101 |
| Деталь: | *Metal F6X8X4 10X1 |
| Парткод: | 607-10006-000 |
| Деталь: | *M Set Guide Plate B A3 |
| Парткод: | 023-28114-200 |
| Деталь: | *Spring B Rear M Set Guide Plate |
| Парткод: | 023-28228-109 |
| Деталь: | *Shaft M Set Guide Plate |
| Парткод: | 023-28036-200 |
| Деталь: | *Spring B Front M Set Guide Plate |
| Парткод: | 023-28115-207 |
| Деталь: | *Stopper Front M.-M Unit |
| Парткод: | 023-28229-105 |
| Деталь: | *Stopper Rear M.-M Unit |
| Парткод: | 023-28247-103 |
| Деталь: | *Bracket Stopper M Set Guide Plate |
| Парткод: | 023-28396-001 |
| Деталь: | *Shaft Stopper M Set Guide Plate |
| Парткод: | 023-28397-105 |
| Деталь: | *Stopper M Set Guide Plate |
| Парткод: | 023-28398-004 |
| Деталь: | *Stopper Spring M Set Guide Plate |
| Парткод: | 023-28399-000 |
| Деталь: | *Master Flange Front |
| Парткод: | 023-28006-106 |
| Деталь: | *RF-Tag Reader Master |
| Парткод: | 444-59006-203 |
| Деталь: | *Base Bracket Stopper M.-M. Close |
| Парткод: | 023-28232-009 |
| Деталь: | *Stopper M.-M. Close |
| Парткод: | 023-28231-002 |
| Деталь: | *Step Screw D6X1.5 M3X4.5 |
| Парткод: | 635-17613-209 |
| Деталь: | *Stopper Spring M.-M Close |
| Парткод: | 023-28233-005 |
| Деталь: | *Rear Cover M.-M. Unit |
| Парткод: | 023-28377-007 |
| Деталь: | **Fulcrum Plate Master Roll Holder |
| Парткод: | 023-28130-001 |
| Деталь: | **Shaft Master Roll Holder |
| Парткод: | 023-28131-105 |
| Деталь: | **Lever Shaft Master Roll Holder |
| Парткод: | 023-28132-101 |
| Деталь: | **Master Holder Base A3 |
| Парткод: | 023-28371-009 |
| Деталь: | **Lever Master roll Holder |
| Парткод: | 023-28133-000 |
| Деталь: | **Lever Spring Master Roll Holder |
| Парткод: | 023-28135-003 |
| Деталь: | **Hook Master Roll Holder |
| Парткод: | 023-28134-007 |
| Деталь: | **Reinforcement Plate Master Holder Base |
| Парткод: | 023-28394-009 |
| Деталь: | **Guide Spring Master Holder |
| Парткод: | 023-28136-000 |
| Деталь: | **Damper Case Master Holder |
| Парткод: | 023-28372-005 |
| Деталь: | **Damper 2G50-C-10HG |
| Парткод: | 610-00022-003 |
| Деталь: | **Master Flange Rear |
| Парткод: | 023-28007-005 |
| Деталь: | **Guide Flange Master Holder |
| Парткод: | 019-15255-007 |
| Деталь: | *Support Plate Rear Frame M.-M |
| Парткод: | 023-28378-100 |
| Деталь: | *Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | Main Gear Assy |
| Парткод: | 045-75290-057 |
| Деталь: | Main Gear Assy |
| Парткод: | 045-75320--053 |
| Деталь: | Main Motor Assy (21-27) |
| Парткод: | 045-75289-059 |
| Деталь: | Pressure Solenoid Assy |
| Парткод: | 045-75309-050 |
| Деталь: | Main Cover |
| Парткод: | 045-15050-006 |
| Деталь: | Support Plate |
| Парткод: | 030-12235-207 |
| Деталь: | BRACKET |
| Парткод: | 023-15012-000 |
| Деталь: | Tensioner Lever |
| Парткод: | 023-15006-204 |
| Деталь: | STEPPED SCREW |
| Парткод: | 635-17814-107 |
| Деталь: | PULLEY |
| Парткод: | 611-90006-009 |
| Деталь: | Shaft Bracket |
| Парткод: | 045-15004-004 |
| Деталь: | *Shaft Joint |
| Парткод: | 045-15003-008 |
| Деталь: | *Main Shaft |
| Парткод: | 045-15002-001 |
| Деталь: | *Main Gear |
| Парткод: | 045-15121-108 |
| Деталь: | *Pulley |
| Парткод: | 611-90007-102 |
| Деталь: | *Pressure Cam |
| Парткод: | 045-15011-000 |
| Деталь: | *Pressure Cam |
| Парткод: | 045-15126-002 |
| Деталь: | *Actuator |
| Парткод: | 023-15046-001 |
| Деталь: | BRACKET |
| Парткод: | 023-15150-003 |
| Деталь: | SENSOR |
| Парткод: | 444-30008-100 |
| Деталь: | WIRE HARNESS |
| Парткод: | 045-53006-002 |
| Деталь: | Pressure Lever Assy |
| Парткод: | 045-15140-005 |
| Деталь: | SPRING |
| Парткод: | 045-15145-007 |
| Деталь: | Shock Absorber Pad |
| Парткод: | 045-15162-009 |
| Деталь: | Pressure Lever Assy |
| Парткод: | 045-15136-008 |
| Деталь: | *Main Motor |
| Парткод: | 490-22020-004 |
| Деталь: | *Bracket |
| Парткод: | 045-15048-001 |
| Деталь: | *Gear Base |
| Парткод: | 045-15201-004 |
| Деталь: | *Gear |
| Парткод: | 612-10047-009 |
| Деталь: | *Gear |
| Парткод: | 612-10017-002 |
| Деталь: | *Pulley |
| Парткод: | 611-90008-109 |
| Деталь: | *Gear |
| Парткод: | 612-16040-006 |
| Деталь: | Damper Cover |
| Парткод: | 045-15205-000 |
| Деталь: | BELT |
| Парткод: | 620-00010-001 |
| Деталь: | *Base Bracket |
| Парткод: | 045-15020-000 |
| Деталь: | *Solenoid |
| Парткод: | 490-50009-008 |
| Деталь: | *Lever |
| Парткод: | 030-12114-108 |
| Деталь: | *Spring |
| Парткод: | 030-12112-008 |
| Деталь: | LEVER ASSY |
| Парткод: | 023-15037-002 |
| Деталь: | SPRING |
| Парткод: | 023-15038-009 |
| Деталь: | Metal |
| Парткод: | 607-10003-001 |
| Деталь: | Sub frame |
| Парткод: | 045-15043-000 |
| Деталь: | Sub Frame Stay |
| Парткод: | 045-15189-004 |
| Деталь: | Horizontal Motor Unit Assy (16-47) |
| Парткод: | 045-75294-052 |
| Деталь: | Slide Rail |
| Парткод: | 024-17063-105 |
| Деталь: | Drum Support Left Rail |
| Парткод: | 023-17062-101 |
| Деталь: | Drum Support Right Rail |
| Парткод: | 023-17061-105 |
| Деталь: | Pre-Pressure Spring Left Drum |
| Парткод: | 023-17140-102 |
| Деталь: | Pre-Pressure Spring Right Drum |
| Парткод: | 023-17139-104 |
| Деталь: | STAY RAIL |
| Парткод: | 024-17060-009 |
| Деталь: | Guide Front Frame R |
| Парткод: | 024-17203-004 |
| Деталь: | Guide Front Frame L |
| Парткод: | 024-17204-000 |
| Деталь: | Seal Drum Set Position |
| Парткод: | 023-17302-005 |
| Деталь: | Guide Front Frame Cover |
| Парткод: | 024-17400-004 |
| Деталь: | Bracket B-Release Base |
| Парткод: | 024-17278-101 |
| Деталь: | Base B Position Release |
| Парткод: | 024-17166-109 |
| Деталь: | Slide Shaft R Assy |
| Парткод: | 024-17500-106 |
| Деталь: | Slide Shaft L Assy |
| Парткод: | 024-17518-005 |
| Деталь: | Plate Slide Shaft ADJ |
| Парткод: | 024-17520-107 |
| Деталь: | *Base Horizontal Motor |
| Парткод: | 024-18002-002 |
| Деталь: | *Gear M0.8X65X6 |
| Парткод: | 612-10037-003 |
| Деталь: | *Gear M0.8X41X6 |
| Парткод: | 612-10038-000 |
| Деталь: | *Washer |
| Парткод: | 024-18011-001 |
| Деталь: | *Gear M0.8X16+M0.8X36 |
| Парткод: | 612-81304-002 |
| Деталь: | *Motor KH42JM2B231 |
| Парткод: | 490-31013-002 |
| Деталь: | *Base Horizontal Movement |
| Парткод: | 024-18001-006 |
| Деталь: | *Catch Horizontal Guide Shaft |
| Парткод: | 024-18030-006 |
| Деталь: | *Guide H-Pressure Spring |
| Парткод: | 024-18010-005 |
| Деталь: | *Sub Movable Plate |
| Парткод: | 024-17524-005 |
| Деталь: | *Edging Saddle TSB-1909L |
| Парткод: | 665-04068-006 |
| Деталь: | *Bracket Horizontal Sensor |
| Парткод: | 024-18013-101 |
| Деталь: | *Plate Horizontal Sensor Cover |
| Парткод: | 024-18031-002 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Wire Harness D-Drawer H |
| Парткод: | 045-53013-009 |
| Деталь: | *Slide Guide Horizontal |
| Парткод: | 024-18017-000 |
| Деталь: | *Spring Horizontal |
| Парткод: | 024-18009-007 |
| Деталь: | *Horizontal Screw |
| Парткод: | 024-18008-000 |
| Деталь: | *Catch Horizontal Screw |
| Парткод: | 024-18029-008 |
| Деталь: | *Movable Plate |
| Парткод: | 024-18014-000 |
| Деталь: | *SW Base Plate |
| Парткод: | 024-18022-003 |
| Деталь: | *Spring Safety SW |
| Парткод: | 024-18028-001 |
| Деталь: | *SW Plate |
| Парткод: | 024-18027-005 |
| Деталь: | *D-Lock Lever |
| Парткод: | 024-18020-108 |
| Деталь: | *Spring D-Lock |
| Парткод: | 024-18021-007 |
| Деталь: | *Shaft D-Lock |
| Парткод: | 024-18019-002 |
| Деталь: | *Shaft Horizontal Guide |
| Парткод: | 024-18012-008 |
| Деталь: | *Link Plate Horizontal |
| Парткод: | 024-18015-007 |
| Деталь: | *Bracket D-Lock Sensor |
| Парткод: | 024-17164-106 |
| Деталь: | *Solenoid TDS-08A-4104 |
| Парткод: | 490-50010-006 |
| Деталь: | *Detection Plate |
| Парткод: | 024-17525-001 |
| Деталь: | Solenoid cover |
| Парткод: | 024-17527-101 |
| Деталь: | Connector Mount |
| Парткод: | 045-50019-006 |
| Деталь: | Wire Harness Front Lower |
| Парткод: | 045-53004-000 |
| Деталь: | *Pulley Ply-S1.5M-90-30 |
| Парткод: | 021-17575-007 |
| Деталь: | *Bracket K-BKT-M Scanner |
| Парткод: | 021-17505-203 |
| Деталь: | *Bracket FB Pulse Motor BKT-MOT |
| Парткод: | 021-17541-102 |
| Деталь: | *Motor Kh42Jm2B154 |
| Парткод: | 021-53201-008 |
| Деталь: | *Wire Harness FB Pulse Motor |
| Парткод: | 045-53014-005 |
| Деталь: | *Frame Assy-Frame-Lower |
| Парткод: | 021-17501-208 |
| Деталь: | *Frame Carriage 1 Frm-Cr1 |
| Парткод: | 021-17554-107 |
| Деталь: | *Inverter Pws-Pxz170E4-B |
| Парткод: | 021-50536-106 |
| Деталь: | *Cover Inverter CVR-INV |
| Парткод: | 021-17558-102 |
| Деталь: | *Mylar Inverter Mlr-Inv |
| Парткод: | 021-17518-003 |
| Деталь: | *Mirror Carriage 1 Mir-1 |
| Парткод: | 021-17509-004 |
| Деталь: | *Adj. Bracket Rear BKT-ADJ-CR1 |
| Парткод: | 021-17555-103 |
| Деталь: | *Plate Spring Mirror 1 Spr-Mir-1 |
| Парткод: | 021-17528-009 |
| Деталь: | *Sponge Mirror 1 Spng-Mir |
| Парткод: | 021-17589-008 |
| Деталь: | *Adj. Bracket Front BKT-ADJ-CR1-F |
| Парткод: | 021-17559-109 |
| Деталь: | *Slide Guide Sllde-Bush Carriage |
| Парткод: | 021-17564-005 |
| Деталь: | *Guide Bracket Guide-Ffc-Cr1 |
| Парткод: | 021-17570-005 |
| Деталь: | *Reflector |
| Парткод: | 021-17556-002 |
| Деталь: | *Wire Harness Assy-Ffc |
| Парткод: | 021-51120-000 |
| Деталь: | *Lamp Uxfl-08Yg37P2 |
| Парткод: | 021-53143-105 |
| Деталь: | *Frame Carriage 2 Frm-Cr2 |
| Парткод: | 021-17560-107 |
| Деталь: | *Bracket F BKT-SllDE-CR2-F |
| Парткод: | 021-17561-103 |
| Деталь: | *Mirror 2 Carriage 2 |
| Парткод: | 021-17581-007 |
| Деталь: | *Support Shaft Sft-Cr2 Carriage 2 |
| Парткод: | 021-17523-007 |
| Деталь: | *Bracket Rear Pulley K-DV-R |
| Парткод: | 021-17506-102 |
| Деталь: | *Pulley Dv-19-H5-W0.25 |
| Парткод: | 021-17582-003 |
| Деталь: | *Guide Pulley Ply-Turn |
| Парткод: | 021-17565-001 |
| Деталь: | *Bracket Front Pulley BKT-DV-CR2-F |
| Парткод: | 021-17562-207 |
| Деталь: | *Pulley Drive Shaft Ply-Drive |
| Парткод: | 021-17521-101 |
| Деталь: | *Wire Front Wr-7X7-S-F |
| Парткод: | 021-17507-109 |
| Деталь: | *Wire Rear Wr-7X7-Z-R |
| Парткод: | 021-17508-105 |
| Деталь: | *Pulley Ply-S1.5M-75 |
| Парткод: | 021-17574-000 |
| Деталь: | *Belt ST1116060 |
| Парткод: | 021-17584-006 |
| Деталь: | *Belt ST1173060 |
| Парткод: | 021-17583-000 |
| Деталь: | *Bracket Pulley BKT-DV |
| Парткод: | 021-17540-106 |
| Деталь: | *Shaft Pulley Sft-Dv |
| Парткод: | 021-17579-002 |
| Деталь: | *Bracket BKT-WIRE-HOLD |
| Парткод: | 021-17557-106 |
| Деталь: | *Plate Spring Spr-Mir-2 |
| Парткод: | 021-17529-005 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 045-53001-000 |
| Деталь: | P.-Rcv.-T Unit(1-23) |
| Парткод: | 023-75095-052 |
| Деталь: | *Flap P.-Rcv.T. Assy |
| Парткод: | 023-75147-052 |
| Деталь: | *Back Stopper P.-RCV.-T |
| Парткод: | 023-21608-003 |
| Деталь: | *Fence Cushion |
| Парткод: | 018-33151-203 |
| Деталь: | *Shaft Fence |
| Парткод: | 023-21634-101 |
| Деталь: | *Slide Base P.Rcv.-T. |
| Парткод: | 023-21635-108 |
| Деталь: | *Slide Plate(Lower) P.-Rcv.-T. |
| Парткод: | 023-21637-003 |
| Деталь: | *Plate Spring P.-Rcv.-T |
| Парткод: | 023-21638-000 |
| Деталь: | *Slide Plate(Upper) P.-Rcv.-T. |
| Парткод: | 023-21636-007 |
| Деталь: | *Lever Paper Guide P.-Rcv.-T. |
| Парткод: | 023-21621-000 |
| Деталь: | *Paper Guide R P.-Rcv.-T. |
| Парткод: | 023-21607-201 |
| Деталь: | *Paper Guide F P.-Rcv.-T. |
| Парткод: | 023-21606-205 |
| Деталь: | **Flap Cover P.-Rcv.-T. |
| Парткод: | 023-21614-003 |
| Деталь: | **Holder Flap P.Rcv.-T |
| Парткод: | 023-21615-204 |
| Деталь: | **Flap P.-Rcv.-T |
| Парткод: | 023-21612-108 |
| Деталь: | **Balancer Flap P.-RCV.-T. |
| Парткод: | 023-21613-007 |
| Деталь: | *Slide Rail Paper Guide P.-Rcv.-T. |
| Парткод: | 023-21639-006 |
| Деталь: | *Slide Rail Paper Stopper P.-Rcv.-T. |
| Парткод: | 023-21640-004 |
| Деталь: | *Side Frame R P.-Rcv.-T. |
| Парткод: | 023-21603-303 |
| Деталь: | *Side Frame F P.-Rcv.-T. |
| Парткод: | 023-21602-307 |
| Деталь: | *Ground Plate Slide Rail P.Rcv.-T. |
| Парткод: | 023-21633-105 |
| Деталь: | *Paper Receiving Tray |
| Парткод: | 023-21601-106 |
| Деталь: | *Seal P.-Pcv.-T:Folding Pic |
| Парткод: | 023-21802-004 |
| Деталь: | *Bracket Magnet Catch P.-Rcv.-T. |
| Парткод: | 023-21643-003 |
| Деталь: | *Magnet Catch SM-50P |
| Парткод: | 660-05000-018 |
| Деталь: | PF Tray Assy (1-30) |
| Парткод: | 024-75089-050 |
| Деталь: | *PFT Table L |
| Парткод: | 024-12102-102 |
| Деталь: | *Seal PFT Close |
| Парткод: | 024-12122-006 |
| Деталь: | *Feed Tray Cover |
| Парткод: | 024-12101-009 |
| Деталь: | *L.O. Sheet |
| Парткод: | 020-11520-009 |
| Деталь: | *Slider F Paper Guide |
| Парткод: | 030-14126-006 |
| Деталь: | *Lock B Paper Guide |
| Парткод: | 030-14130-003 |
| Деталь: | *Lock A Paper Guide |
| Парткод: | 030-14129-005 |
| Деталь: | *Shaft PF Tray |
| Парткод: | 024-12105-004 |
| Деталь: | *Slider R Paper Guide |
| Парткод: | 030-14124-003 |
| Деталь: | *GEAR M1X16X3.2 |
| Парткод: | 612-12103-003 |
| Деталь: | *Slide Rack P-F-T |
| Парткод: | 024-12110-008 |
| Деталь: | *Collar Slide Rack P-F-T |
| Парткод: | 030-14133-002 |
| Деталь: | *Frame PF Tray F |
| Парткод: | 024-12112-000 |
| Деталь: | *Cover Hinge |
| Парткод: | 024-12111-004 |
| Деталь: | *Shaft Hinge |
| Парткод: | 024-12109-000 |
| Деталь: | *Gear M1x20x7 |
| Парткод: | 612-10036-007 |
| Деталь: | *One-Way Hinge OWNF6-1NRS |
| Парткод: | 610-10009-005 |
| Деталь: | *Frame PF Tray R |
| Парткод: | 024-12113-007 |
| Деталь: | *PF-Tray-PCB |
| Парткод: | 024-12602-105 |
| Деталь: | *Bracket Potentiometer |
| Парткод: | 024-12127-008 |
| Деталь: | *Gear M1X72X6 |
| Парткод: | 612-10039-006 |
| Деталь: | *Potentiometer P.-F.-T. |
| Парткод: | 021-51032-209 |
| Деталь: | *Sensor PS-117ED1 |
| Парткод: | 444-33006-000 |
| Деталь: | *Wire Harness PF Tray Inner |
| Парткод: | 024-12608-103 |
| Деталь: | *Lever Fence Lock |
| Парткод: | 024-12120-003 |
| Деталь: | *Fence Tray F |
| Парткод: | 024-12106-000 |
| Деталь: | *Fence Tray R |
| Парткод: | 024-12107-007 |
| Деталь: | *Fence Sheet |
| Парткод: | 024-12123-002 |
| Деталь: | *Seal Fence Set |
| Парткод: | 024-12121-000 |
| Деталь: | *PFT Table S |
| Парткод: | 024-12108-100 |
| Деталь: | FIXED PLATE PFT |
| Парткод: | 024-12119-005 |
| Деталь: | FFC COVER |
| Парткод: | 024-12116-006 |
| Деталь: | FFC holder |
| Парткод: | 024-12125-005 |
| Деталь: | WIRE HARNESS PF TRAY |
| Парткод: | 024-12607-107 |
| Деталь: | Magnet Catch SM-50P |
| Парткод: | 660-05000-018 |
| Деталь: | Bracket Magnet Catch P.-Rcv.-T. |
| Парткод: | 023-21643-003 |
| Деталь: | Bracket SH4 PCB |
| Парткод: | 045-50018-000 |
| Деталь: | SH4FPCB |
| Парткод: | 024-50502-602 |
| Деталь: | SH4FPCB C |
| Парткод: | 024-50504-206 |
| Деталь: | Noise Reduction Cover |
| Парткод: | 045-50016-007 |
| Деталь: | Bracket Option IF Connector |
| Парткод: | 045-50017-208 |
| Деталь: | Bracket Option IF Connector C |
| Парткод: | 045-50017-209 |
| Деталь: | Cover NET-D |
| Парткод: | 024-50025-200 |
| Деталь: | Card cover |
| Парткод: | 024-50008-209 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 045-53001-000 |
| Деталь: | Wire Harness TPH Drawer Connector H |
| Парткод: | 045-53002-104 |
| Деталь: | Wire Harness Panel Unit |
| Парткод: | 045-53008-005 |
| Деталь: | Hinge Bracket Upper |
| Парткод: | 045-50011-102 |
| Деталь: | Secure Bracket SH PCB |
| Парткод: | 045-50010-009 |
| Деталь: | Hinge Bracket Lower |
| Парткод: | 023-50004-001 |
| Деталь: | Bracket SH Wire Harness |
| Парткод: | 045-50022-007 |
| Деталь: | Wire Saddle LWS-1316 |
| Парткод: | 665-02043-006 |
| Деталь: | Edging Saddle LES-1017 |
| Парткод: | 665-00309-009 |
| Деталь: | *TPH Assy A3 600 |
| Парткод: | 045-75307-057 |
| Деталь: | *TPH Pressure Motor Assy SU |
| Парткод: | 023-75143-057 |
| Деталь: | *Frame M-M Upper Unit |
| Парткод: | 023-28150-304 |
| Деталь: | *Shaft Handle M-M Up |
| Парткод: | 023-28157-104 |
| Деталь: | *Hook Lever M.-M Up |
| Парткод: | 023-28236-004 |
| Деталь: | *Hook M.-M Up |
| Парткод: | 023-28237-000 |
| Деталь: | *Hook Spring M.-M Up |
| Парткод: | 023-28356-000 |
| Деталь: | *Pushing Plate R Set-Guide Plate |
| Парткод: | 023-28253-103 |
| Деталь: | *Spring Hook Bracket Rear TPH Pressure |
| Парткод: | 023-28152-005 |
| Деталь: | *Spring Rear M.-M Up |
| Парткод: | 023-28156-000 |
| Деталь: | *Pivot Support Plate Rear M.-M Up |
| Парткод: | 023-28252-107 |
| Деталь: | *Shaft M.-M Upper Unit |
| Парткод: | 023-28154-202 |
| Деталь: | *Pushing Plate F Set-Guide Plate |
| Парткод: | 023-28215-201 |
| Деталь: | *Bracket Front TPH Pressure spring |
| Парткод: | 023-28381-004 |
| Деталь: | *Spring Front M.-M Up |
| Парткод: | 023-28155-004 |
| Деталь: | *Pivot Support Plate Front M.-M Up |
| Парткод: | 023-28151-106 |
| Деталь: | *Safety Stopper M.-M Up |
| Парткод: | 023-28177-202 |
| Деталь: | *Seal Master Making Unit |
| Парткод: | 023-28426-202 |
| Деталь: | *Upper Bracket A3 Master End Sensor |
| Парткод: | 023-28418-005 |
| Деталь: | *light Absorber Strip(21X15) |
| Парткод: | 023-28431-001 |
| Деталь: | *Cover Master End Sensor |
| Парткод: | 023-28427-004 |
| Деталь: | *Sensor (Rcv) KH0854-01 |
| Парткод: | 444-42030-305 |
| Деталь: | *Bottom Cover TPH M.-M. |
| Парткод: | 023-28162-000 |
| Деталь: | *De-Electricity Brush A3 |
| Парткод: | 023-28410-004 |
| Деталь: | *Pivot Shaft TPH |
| Парткод: | 023-28158-305 |
| Деталь: | *Pressure Release Plate TPH Press |
| Парткод: | 023-28160-008 |
| Деталь: | *Pressure Lever Bracket M.-M Up |
| Парткод: | 023-28159-301 |
| Деталь: | *TPH Pressure Spring 50 |
| Парткод: | 045-28004-003 |
| Деталь: | *TPH Alignment Shaft |
| Парткод: | 023-28173-304 |
| Деталь: | *Metal F10X14X10 18X2 |
| Парткод: | 607-10008-003 |
| Деталь: | **TPH holder TA3 |
| Парткод: | 023-28174-505 |
| Деталь: | **TPH Pressure Assist Plate A3 |
| Парткод: | 023-28413-100 |
| Деталь: | **TPH Boss |
| Парткод: | 023-28412-201 |
| Деталь: | **Protection Plate TPH connector TA3 |
| Парткод: | 023-28315-206 |
| Деталь: | **Stepped Screw F6x7.2 M3x4 |
| Парткод: | 635-10005-203 |
| Деталь: | **TPH303R14 |
| Парткод: | 045-28006-006 |
| Деталь: | **Plate T-Rear TPH |
| Парткод: | 023-28021-202 |
| Деталь: | **Plate T-Front TPH |
| Парткод: | 023-28022-209 |
| Деталь: | **Bracket TPH Brush TA3 |
| Парткод: | 023-28175-200 |
| Деталь: | **De-electricity Brush TPH A3 |
| Парткод: | 023-28411-000 |
| Деталь: | **Holding roller TA3 |
| Парткод: | 023-28024-104 |
| Деталь: | **Metal F8x10x3 11.2x0.6 |
| Парткод: | 607-10005-004 |
| Деталь: | **Ground Wire U3-55-R3 |
| Парткод: | 488-90030-206 |
| Деталь: | *Lock Ring |
| Парткод: | 019-11812-106 |
| Деталь: | *Metal F8X12X7 16X1.5 |
| Парткод: | 607-15007-005 |
| Деталь: | **Bracket TPH pressure motor |
| Парткод: | 023-28168-106 |
| Деталь: | **Cam TPH Pressure |
| Парткод: | 023-28165-000 |
| Деталь: | **Gear M1X20X6 |
| Парткод: | 612-10010-008 |
| Деталь: | **Shaft TPH Pressure Cam |
| Парткод: | 023-28166-103 |
| Деталь: | **Metal F6X10/9X6:12 X 1.5 |
| Парткод: | 607-13000-402 |
| Деталь: | **Pressure Detection Plate TPH |
| Парткод: | 023-28361-003 |
| Деталь: | **Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | **Shaft Gear TPH lift Motor |
| Парткод: | 023-28213-101 |
| Деталь: | **Gear M0.8X25+M0.8X14 |
| Парткод: | 612-80006-008 |
| Деталь: | **Shaft Gear 8 TPH lift Motor |
| Парткод: | 023-28433-101 |
| Деталь: | **Gear M0.8X25+M1X14 |
| Парткод: | 612-80007-004 |
| Деталь: | **Gear M0.8X20+M0.8X14 |
| Парткод: | 612-80008-000 |
| Деталь: | **Motor Assy (CWRS-445PA) |
| Парткод: | 023-74001-054 |
| Деталь: | **Support Clamp Worm |
| Парткод: | 030-19205-001 |
| Деталь: | **Holding Plate Worm Gear |
| Парткод: | 023-28172-006 |
| Деталь: | *Wire Harness M.-M Upper Unit |
| Парткод: | 045-28202-000 |
| Деталь: | *Gear Cover M.-M UP |
| Парткод: | 023-28328-103 |
| Деталь: | *Seal TPH Cleaning Pic. |
| Парткод: | 023-28942-103 |
| Деталь: | Seal TPH Pic. |
| Парткод: | 023-28423-009 |
| Деталь: | Seal TPH Eng. |
| Парткод: | 023-28424-005 |
| Деталь: | Seal TPH Ch. |
| Парткод: | 023-28425-001 |
| Деталь: | *Bracket TPH Drawer Connector UP |
| Парткод: | 023-28382-205 |
| Деталь: | *Spring Drawer Connecter |
| Парткод: | 023-28078-000 |
| Деталь: | *Stepped Screw F4X4.5 M3X4 |
| Парткод: | 635-10002-107 |
| Деталь: | *TPH Drawer Connector U M.-M Up |
| Парткод: | 045-28201-100 |
| Деталь: | *Wire Saddle LWS-1316 |
| Парткод: | 665-02043-006 |
| Деталь: | *Spring TPH Alignment Shaft |
| Парткод: | 023-28435-007 |
| Деталь: | *Bracket Sub-Power Supply PCB |
| Парткод: | 045-28003-007 |
| Деталь: | *Sub-Power Supply PCB |
| Парткод: | 045-28002-000 |
| Деталь: | *Wire Harness Sub-Power Supply PCB |
| Парткод: | 045-28203-006 |
| Деталь: | Part Name |
| Парткод: | Part No. |
| Деталь: | M.-Making Junction PCB |
| Парткод: | 023-28218-200 |
| Деталь: | Bracket Upper Junction PCB M.-M. |
| Парткод: | 023-28204-005 |
| Деталь: | Bracket Lower Junction PCB M.-M. |
| Парткод: | 023-28221-007 |
| Деталь: | Frame Drive Interlock SW P.-F. Side |
| Парткод: | 023-50044-100 |
| Деталь: | Shaft Bracket Drive Interlock SW |
| Парткод: | 023-50042-000 |
| Деталь: | Spring Drive Interlock SW |
| Парткод: | 023-50041-004 |
| Деталь: | Button Drive Interlock SW |
| Парткод: | 023-50055-102 |
| Деталь: | DRIVE INTERLOCK SAFETY SW |
| Парткод: | 023-53026-006 |
| Деталь: | Bracket Pf Side Drive Interlock SW |
| Парткод: | 023-50052-103 |
| Деталь: | Spring SW Bracket D Interlock SW |
| Парткод: | 023-50053-002 |
| Деталь: | Frame Drive Interlock SW P.-Rcv. Side |
| Парткод: | 023-50043-104 |
| Деталь: | Bracket P-Rcv Side Drive Interlock SW |
| Парткод: | 023-50051-107 |
| Деталь: | Hinge Upper PCB Bracket |
| Парткод: | 045-50013-008 |
| Деталь: | Hinge Lower PCB Bracket |
| Парткод: | 045-50014-004 |
| Деталь: | Bracket Upper Power Supply PCB |
| Парткод: | 045-50015-000 |
| Деталь: | Bracket Power Supply & Mech PCB |
| Парткод: | 045-50020-004 |
| Деталь: | M.-Motor Drive PCB |
| Парткод: | 045-50002-103 |
| Деталь: | Power Supply 17-HWW |
| Парткод: | 045-50005-200 |
| Деталь: | Mech.-Control PCB SU |
| Парткод: | 045-75280-051 |
| Деталь: | BATTERY CR-2032 |
| Парткод: | 408-02300-001 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 045-53006-002 |
| Деталь: | Wire Harness Master Rf-Tag |
| Парткод: | 023-53003-006 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 045-53001-000 |
| Деталь: | Junction Wire Harness M.-Motor |
| Парткод: | 045-53009-001 |
| Деталь: | Wire Harness Main Power SW |
| Парткод: | 045-50031-006 |
| Деталь: | Edging Saddle LES-25L |
| Парткод: | 665-00308-002 |
| Деталь: | Wire Saddle LWS-2218 |
| Парткод: | 665-02055-004 |
| Деталь: | Wire Saddle LWS-1316 |
| Парткод: | 665-02043-006 |
| Деталь: | SB-6025 |
| Парткод: | 665-04055-001 |
| Деталь: | Square Bushing SB4025 |
| Парткод: | 665-04002-005 |
| Деталь: | Square Bushing SB-2718 |
| Парткод: | 665-04054-005 |
| Деталь: | Wire Harness M.-Drive Power |
| Парткод: | 045-53010-000 |
| Деталь: | Wire Harness Mech. CTL Drive |
| Парткод: | 045-53011-006 |
| Деталь: | Wire Harness TPH Drawer Connector H |
| Парткод: | 045-53002-104 |
| Деталь: | Edging Saddle LES-1017 |
| Парткод: | 665-00309-009 |
| Деталь: | Wire Saddle WS-4N-V0 |
| Парткод: | 665-00311-003 |
| Деталь: | Power Cord RP3 UI |
| Парткод: | 488-00047-105 |
| Деталь: | Power Cord 220V EU (L) |
| Парткод: | 488-00048-004 |
| Деталь: | POWER CORD CH. |
| Парткод: | 488-00049-108 |
| Деталь: | Flap P.-Rcv.-T. Assy |
| Парткод: | 023-75147-052 |
| Деталь: | Paper Receiving Tray AS |
| Парткод: | 045-22001-002 |
| Деталь: | Plate Catch |
| Парткод: | 045-22026-005 |
| Деталь: | Bracket SW |
| Парткод: | 030-22061-002 |
| Деталь: | Push Button SW Assy |
| Парткод: | 021-51030-109 |
| Деталь: | Cover AS Lower |
| Парткод: | 045-22027-001 |
| Деталь: | Bracket AS Lower Cover |
| Парткод: | 045-22035-004 |
| Деталь: | Frame M AS Tray |
| Парткод: | 045-22001-002 |
| Деталь: | Frame F AS Tray |
| Парткод: | 045-22003-001 |
| Деталь: | Frame R AS Tary |
| Парткод: | 045-22005-008 |
| Деталь: | *Flap P.-Rcv.-T. |
| Парткод: | 023-21612-108 |
| Деталь: | *Balancer Flap P.-RCV.-T. |
| Парткод: | 023-21613-007 |
| Деталь: | *Holder Flap P.Rcv.-T. |
| Парткод: | 023-21615-204 |
| Деталь: | *Flap Cover P.-Rcv.-T. |
| Парткод: | 023-21614-003 |
| Деталь: | Paper Guide F P.-Rcv.-T. |
| Парткод: | 023-21606-205 |
| Деталь: | Paper Guide R P.-Rcv.-T. |
| Парткод: | 023-21607-201 |
| Деталь: | Back Stopper P.-RCV.-T |
| Парткод: | 023-21608-003 |
| Деталь: | Fence Cushion |
| Парткод: | 018-33151-203 |
| Деталь: | Lever Paper Guide P.-Rcv.-T. |
| Парткод: | 023-21621-000 |
| Деталь: | Shaft Fence |
| Парткод: | 023-21634-004 |
| Деталь: | Lock Plate F AS Tray |
| Парткод: | 030-22043-101 |
| Деталь: | Lock Plate R AS Tray |
| Парткод: | 030-22044-108 |
| Деталь: | AS Tray Arm RZ |
| Парткод: | 045-22034-008 |
| Деталь: | Boss AS Tray |
| Парткод: | 045-22043-007 |
| Деталь: | Support Bracket F AS Tary |
| Парткод: | 045-22031-009 |
| Деталь: | Support Bracket R AS Tary |
| Парткод: | 045-22029-004 |
| Деталь: | Damper AS Tray |
| Парткод: | 610-00015-007 |
| Деталь: | Bracket Magnet Catch |
| Парткод: | 045-22028-008 |
| Деталь: | Magnet Catch CA-0147B |
| Парткод: | 660-05107-106 |
| Деталь: | Seal AS Operation Pic. |
| Парткод: | 045-22801-009 |
| Деталь: | Pick-Up Roller RZ (15-16) |
| Парткод: | 023-12305-006 |
| Деталь: | COVER P.-FEED |
| Парткод: | 023-12316-105 |
| Деталь: | Seal P.-Feed Pressure Pic. |
| Парткод: | 550-21173-001 |
| Деталь: | SEAL P.-F.-T. DOWN |
| Парткод: | 030-04034-006 |
| Деталь: | Upper Guard |
| Парткод: | 023-12319-007 |
| Деталь: | STEPPED SCREW F8X2.3 M4X4.4 |
| Парткод: | 635-17824-005 |
| Деталь: | E SWITCH PLATE |
| Парткод: | 023-12315-001 |
| Деталь: | SPRING ELEVATOR SAFETY SW UPPER |
| Парткод: | 023-12344-001 |
| Деталь: | Elevator SW Assy |
| Парткод: | 021-51029-208 |
| Деталь: | Elevator Safety SW |
| Парткод: | 023-53023-007 |
| Деталь: | FRAME BRACKET PICK-UP |
| Парткод: | 023-12333-204 |
| Деталь: | SHAFT PICK-UP ROLLER |
| Парткод: | 023-12329-002 |
| Деталь: | GEAR M0.8X33X7.4 |
| Парткод: | 612-10021-107 |
| Деталь: | METAL F10X15/14X6 18X2 |
| Парткод: | 607-16001-000 |
| Деталь: | SUPPORT PICK-UP ROLLER SHAFT |
| Парткод: | 023-12328-103 |
| Деталь: | Rubber Pick-Up Roller |
| Парткод: | 035-14303-001 |
| Деталь: | Core Pick-up Roller |
| Парткод: | 023-12306-002 |
| Деталь: | Lock Ring |
| Парткод: | 019-11812-106 |
| Деталь: | SCRAPER SHAFT PICKUP |
| Парткод: | 023-12330-000 |
| Деталь: | GEAR M0.8X34X8.5 |
| Парткод: | 612-11300-107 |
| Деталь: | JOINT SHAFT ASSY |
| Парткод: | 023-12338-001 |
| Деталь: | Extention Shaft Pick-Up Roller |
| Парткод: | 023-12337-102 |
| Деталь: | Paper Guide Roller |
| Парткод: | 011-11522-100 |
| Деталь: | STOPPER PAPER GUIDE ROLLER |
| Парткод: | 000-06123-007 |
| Деталь: | Actuator Upper limit Std P.-F.-T. |
| Парткод: | 023-12334-006 |
| Деталь: | Actuator Upper limit Card P.-F.-T. |
| Парткод: | 023-12308-005 |
| Деталь: | Stay Paper Feed |
| Парткод: | 023-12310-000 |
| Деталь: | ARM P.-F.PRESSURE ADJ. |
| Парткод: | 020-11813-006 |
| Деталь: | SPRING B P.-F.PRESSURE ADJ. |
| Парткод: | 020-11811-100 |
| Деталь: | P.-F.Pressure Adj. Lever |
| Парткод: | 023-12312-100 |
| Деталь: | SPRING PF PRESSURE ADJ. LEVER |
| Парткод: | 023-12313-009 |
| Деталь: | BRACKET A UPPER LIMIT SENSOR |
| Парткод: | 023-12314-005 |
| Деталь: | Support Plate B Upper Limit |
| Парткод: | 030-14342-205 |
| Деталь: | Upper Limit Adj. Screw |
| Парткод: | 030-14346-103 |
| Деталь: | BASE UPPER LIMIT ADJ. SCREW |
| Парткод: | 030-14347-002 |
| Деталь: | BRACKET UPPER LIMIT SENSOR |
| Парткод: | 023-12325-007 |
| Деталь: | Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Wire Harness Paper Feed Upper |
| Парткод: | 045-12601-001 |
| Деталь: | Base Bracket PF One-way |
| Парткод: | 045-15515-009 |
| Деталь: | Hook Base PF One-way |
| Парткод: | 045-15513-006 |
| Деталь: | ONE-WAY Hook |
| Парткод: | 024-15187-109 |
| Деталь: | STEPPED SCREW F6X1.8 M3X4 |
| Парткод: | 635-17613-209 |
| Деталь: | Spring ONE-WAY Hook |
| Парткод: | 024-15172-004 |
| Деталь: | PF ONE-WAY Core Assy |
| Парткод: | 024-15173-000 |
| Деталь: | Bracket P.-F. Clutch |
| Парткод: | 045-15517-001 |
| Деталь: | MC-10-25 |
| Парткод: | 490-51018-108 |
| Деталь: | Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | Metal F8X12/10.8X14 16X2 |
| Парткод: | 607-15001-503 |
| Деталь: | Solenoid TDS-08A-1030 |
| Парткод: | 490-50010-006 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 045-53001-000 |
| Деталь: | Clamp Unit (1-10) |
| Парткод: | 045-75301-059 |
| Деталь: | *Clamp Motor Assy (3-7) |
| Парткод: | 023-75070-050 |
| Деталь: | *Clamp Cam Assy |
| Парткод: | 045-75032-055 |
| Деталь: | **Cam Drive Shaft Assy |
| Парткод: | 045-75303-051 |
| Деталь: | **Bracket plate Clamp drive |
| Парткод: | 023-26000-100 |
| Деталь: | **Gear M0.8X37+M1X15 |
| Парткод: | 612-11304-005 |
| Деталь: | **Gear M0.8X35+M0.8X15 |
| Парткод: | 612-81303-006 |
| Деталь: | **Support Clamp Worm |
| Парткод: | 030-19205-001 |
| Деталь: | **Motor Assy (CWRS-445PA) |
| Парткод: | 023-74001-054 |
| Деталь: | *Bracket Clamp Sensor |
| Парткод: | 023-26005-005 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Wire Harness Clamp Unit |
| Парткод: | 023-26018-000 |
| Деталь: | Elevator Motor Assy (23-32) |
| Парткод: | 023-75078-050 |
| Деталь: | Plate Elevator R |
| Парткод: | 024-12207-109 |
| Деталь: | Plate Elevator F |
| Парткод: | 024-12201-100 |
| Деталь: | Absorber Gear |
| Парткод: | 024-12206-005 |
| Деталь: | Elevator Shaft Assy |
| Парткод: | 023-75159-050 |
| Деталь: | Reinforce Elevator |
| Парткод: | 024-12210-002 |
| Деталь: | Guide Shaft |
| Парткод: | 024-12211-009 |
| Деталь: | Lower Limit Frame P.-F. |
| Парткод: | 023-12205-001 |
| Деталь: | Support Lower limit Frame P.-F. |
| Парткод: | 023-12206-008 |
| Деталь: | Elevator Guide |
| Парткод: | 024-12213-001 |
| Деталь: | ELEVATOR RACK P.-F. |
| Парткод: | 023-12201-006 |
| Деталь: | Bracket F Spring Lower Safety SW |
| Парткод: | 023-12251-003 |
| Деталь: | Bracket R Spring Lower Safety SW |
| Парткод: | 023-12252-000 |
| Деталь: | Spring Elevator Safety SW Lower |
| Парткод: | 023-12237-000 |
| Деталь: | Elevator Safety SW |
| Парткод: | 023-53023-007 |
| Деталь: | BRACKET LOWER LIMIT SENSOR |
| Парткод: | 023-12233-102 |
| Деталь: | Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | Spring Elevator |
| Парткод: | 023-12202-002 |
| Деталь: | Bracket Elevator Spring P.-F. |
| Парткод: | 023-12203-009 |
| Деталь: | E Spring Hook R |
| Парткод: | 024-12215-101 |
| Деталь: | FFC GUIDE |
| Парткод: | 024-12214-008 |
| Деталь: | BEARING FLAW678ZZA |
| Парткод: | 600-50057-006 |
| Деталь: | Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | *Cover Elevator Motor |
| Парткод: | 023-12247-006 |
| Деталь: | *Motor Chassis Elevator Motor |
| Парткод: | 023-12234-109 |
| Деталь: | *Gear Cover Elevator Motor |
| Парткод: | 023-12223-000 |
| Деталь: | *Gear M1x24 |
| Парткод: | 612-10009-107 |
| Деталь: | *Gear M0.8X23+M0.8X14 |
| Парткод: | 612-80011-001 |
| Деталь: | *Gear M0.8X30+M0.8X14 |
| Парткод: | 612-80012-008 |
| Деталь: | *Gear M0.8X29+M1X14 |
| Парткод: | 612-80013-004 |
| Деталь: | *Elevator Motor Collar |
| Парткод: | 023-12244-104 |
| Деталь: | *Motor Assy(CWRS-445PA) |
| Парткод: | 023-74001-054 |
| Деталь: | *Support Clamp Worm |
| Парткод: | 030-19205-001 |
| Деталь: | Wire Harness Elevator Motor |
| Парткод: | 023-12602-108 |
| Деталь: | Bracket PFR-PCB |
| Парткод: | 024-12209-101 |
| Деталь: | Junction PCB Paper Feed |
| Парткод: | 045-50003-002 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 045-53001-000 |
| Деталь: | WIRE HARNESS PF TRAY |
| Парткод: | 024-12607-107 |
| Деталь: | Wire Harness Front Upper |
| Парткод: | 024-53035-100 |
| Деталь: | Detection Plate Paper Volume |
| Парткод: | 024-12216-000 |
| Деталь: | Clamp Plate Base Assy (20-29) |
| Парткод: | 024-75100-053 |
| Деталь: | Drum Body A3 |
| Парткод: | 024-75061-058 |
| Деталь: | Drum Body LD |
| Парткод: | 024-75063-050 |
| Деталь: | Screen Assy (S) |
| Парткод: | 024-17115-008 |
| Деталь: | Light Absorber Strip(328X18) |
| Парткод: | 023-17004-306 |
| Деталь: | Hanger Plate Screen |
| Парткод: | 024-17003-005 |
| Деталь: | Block Sheet Assy A3W |
| Парткод: | 024-17011-008 |
| Деталь: | Seal Tape A3W |
| Парткод: | 024-17256-000 |
| Деталь: | DRUM SEAL |
| Парткод: | 023-17007-003 |
| Деталь: | Flange Front |
| Парткод: | 023-17012-104 |
| Деталь: | Weight Balance F A |
| Парткод: | 023-17014-000 |
| Деталь: | Weight Balance F B |
| Парткод: | 023-17262-003 |
| Деталь: | Flange Handle |
| Парткод: | 024-17149-000 |
| Деталь: | B Position Marking Sticker |
| Парткод: | 023-17307-007 |
| Деталь: | Flange Gear |
| Парткод: | 024-17009-003 |
| Деталь: | Drum Flange Rear |
| Парткод: | 023-17006-201 |
| Деталь: | Weight Balance R A |
| Парткод: | 023-17011-000 |
| Деталь: | Weight Balance R B |
| Парткод: | 023-17261-007 |
| Деталь: | Metal Stopper Drum |
| Парткод: | 023-17263-000 |
| Деталь: | Drum Joint |
| Парткод: | 024-17008-104 |
| Деталь: | Boss A-Positioning ADJ |
| Парткод: | 024-17010-109 |
| Деталь: | *Clamp Plate Base |
| Парткод: | 024-17067-100 |
| Деталь: | *Clamp Magnet |
| Парткод: | 024-17181-000 |
| Деталь: | *Friction Sheet |
| Парткод: | 024-17180-004 |
| Деталь: | *Spring Clamp Plate Base |
| Парткод: | 023-17251-001 |
| Деталь: | *Clamp Plate |
| Парткод: | 024-17068-107 |
| Деталь: | *Release Lever Clamp Plate |
| Парткод: | 023-17191-106 |
| Деталь: | *Collar D12 Clamp |
| Парткод: | 023-17069-009 |
| Деталь: | *Spring Clamp Plate Close |
| Парткод: | 023-17275-008 |
| Деталь: | *Projection Plate |
| Парткод: | 024-17071-108 |
| Деталь: | *Shaft Projection Support |
| Парткод: | 024-17428-006 |
| Деталь: | Light Absorber Strip(65X18) |
| Парткод: | 023-17344-204 |
| Деталь: | FRAME |
| Парткод: | 045-22032-005 |
| Деталь: | Lock Ring |
| Парткод: | 634-00003-000 |
| Деталь: | FLANGE |
| Парткод: | 030-22007-008 |
| Деталь: | PULLEY |
| Парткод: | 030-22002-006 |
| Деталь: | PULLEY |
| Парткод: | 030-22058-001 |
| Деталь: | Tension Plate |
| Парткод: | 030-22008-004 |
| Деталь: | STEPPED SCREW |
| Парткод: | 030-22029-001 |
| Деталь: | PULLEY |
| Парткод: | 030-22004-106 |
| Деталь: | BELT |
| Парткод: | 620-00004-001 |
| Деталь: | BRACKET |
| Парткод: | 030-22030-107 |
| Деталь: | BELT |
| Парткод: | 620-00019-008 |
| Деталь: | EDGING SADDLE |
| Парткод: | 665-04061-001 |
| Деталь: | TENSION SPRING |
| Парткод: | 030-22031-006 |
| Деталь: | PIN |
| Парткод: | X-520 |
| Деталь: | BEARING |
| Парткод: | 609-00003-008 |
| Деталь: | GEAR |
| Парткод: | 030-22017-003 |
| Деталь: | Shaft5 |
| Парткод: | 030-22088-008 |
| Деталь: | Metal |
| Парткод: | 030-22073-000 |
| Деталь: | GEAR |
| Парткод: | 030-22015-000 |
| Деталь: | Gear Box |
| Парткод: | 030-22086-005 |
| Деталь: | 17PM-K046-G1ST |
| Парткод: | 490-33013-204 |
| Деталь: | RAIL |
| Парткод: | 045-22022-000 |
| Деталь: | CLAMP |
| Парткод: | 030-22006-001 |
| Деталь: | D3M-01L2-3 |
| Парткод: | 444-12000-002 |
| Деталь: | Belt Slider F |
| Парткод: | 045-22020-007 |
| Деталь: | Slide Base |
| Парткод: | 045-22012-004 |
| Деталь: | SPRING |
| Парткод: | 045-22013-000 |
| Деталь: | Slide Plate L |
| Парткод: | 045-22014-007 |
| Деталь: | Rail Slider |
| Парткод: | 045-22021-003 |
| Деталь: | Slide Plate U |
| Парткод: | 045-22010-001 |
| Деталь: | Belt Slider R |
| Парткод: | 045-22023-006 |
| Деталь: | EE-SX1235A-P2 |
| Парткод: | 444-30006-000 |
| Деталь: | WIRE HARNESS |
| Парткод: | 045-22202-008 |
| Деталь: | AF-CTRL-PCB 2 |
| Парткод: | 045-22201-001 |
| Деталь: | BRACKET |
| Парткод: | 030-22085-009 |
| Деталь: | WIRE HARNESS |
| Парткод: | 045-22203-004 |
| Деталь: | AF-I/F Cable 2 |
| Парткод: | 045-22204-205 |
| Деталь: | Separation Fan Assy (1-5) |
| Парткод: | 045-75300-052 |
| Деталь: | Air Pump Assy (16-31) |
| Парткод: | 045-75297-051 |
| Деталь: | *Base Separation Fan |
| Парткод: | 023-21017-102 |
| Деталь: | *Fan D12F-24PLH1C13 |
| Парткод: | 490-41013-108 |
| Деталь: | *Air Nozzle |
| Парткод: | 023-21018-001 |
| Деталь: | *light Absorber Strip(35X28) |
| Парткод: | 023-21393-007 |
| Деталь: | *Wire Harness Separation Fun |
| Парткод: | 045-21702-007 |
| Деталь: | Air Hose Separator |
| Парткод: | 023-21016-106 |
| Деталь: | Power Band T10 |
| Парткод: | 665-02901-002 |
| Деталь: | Separator MZ |
| Парткод: | 024-21038-000 |
| Деталь: | SHAFT SEPARATOR |
| Парткод: | 045-21002-005 |
| Деталь: | Release Lever Separator |
| Парткод: | 023-21007-000 |
| Деталь: | Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | ADJUSTMENT PLATE |
| Парткод: | 023-21003-004 |
| Деталь: | Stopper Separator |
| Парткод: | 023-21005-007 |
| Деталь: | Stepped Screw 6X1.7 M4X4 |
| Парткод: | 635-17614-205 |
| Деталь: | Fixing Pin |
| Парткод: | 020-13114-202 |
| Деталь: | *Cylinder Base Bracket Air pump |
| Парткод: | 023-21013-409 |
| Деталь: | *Gear M1X80X10 |
| Парткод: | 612-03106-008 |
| Деталь: | *Timing Plate Air Pump |
| Парткод: | 023-21023-200 |
| Деталь: | *Arm Air Pump |
| Парткод: | 019-13511-103 |
| Деталь: | *Cylinder Air Pump |
| Парткод: | 023-21021-002 |
| Деталь: | *Cylinder Valve ll Air Pump |
| Парткод: | 019-13517-004 |
| Деталь: | *Cylinder Valve Sheet Air Pump |
| Парткод: | 019-13518-000 |
| Деталь: | *Piston Head ll Air Pump |
| Парткод: | 019-13516-105 |
| Деталь: | *O Ring 34-3.6 |
| Парткод: | 640-67340-009 |
| Деталь: | *Arm Shaft Air Pump |
| Парткод: | 019-13512-002 |
| Деталь: | *Adj. Valve Air blow |
| Парткод: | 023-21011-104 |
| Деталь: | *Spring Adj. Valve Air Blow |
| Парткод: | 023-21010-000 |
| Деталь: | *Solenoid TDS-08A-1030 |
| Парткод: | 490-50010-006 |
| Деталь: | *Pressure Release Base Air Pump |
| Парткод: | 045-21005-004 |
| Деталь: | *Release Lever Air Pump |
| Парткод: | 045-21007-007 |
| Деталь: | *Spring Release Lever |
| Парткод: | 045-21009-000 |
| Деталь: | Wire Harness Rear Lower |
| Парткод: | 045-53005-006 |
| Деталь: | RELEASE PLATE |
| Парткод: | 023-21001-001 |
| Деталь: | Clip NK-7N Nikko Nylon Clip |
| Парткод: | 665-02021-606 |
| Деталь: | Transfer Guide Unit (18-26,29-53) |
| Парткод: | 045-75325-055 |
| Деталь: | AM50031A431F1 |
| Парткод: | 444-10001-001 |
| Деталь: | SW Plate |
| Парткод: | 021-11317-103 |
| Деталь: | Spring SW |
| Парткод: | 021-11318-002 |
| Деталь: | Bracket Jam Release Cover SW |
| Парткод: | 045-34101-100 |
| Деталь: | Lever Jam Release Cover |
| Парткод: | 045-14069-005 |
| Деталь: | Shaft Release Lever |
| Парткод: | 045-14055-004 |
| Деталь: | Stay Release Lever Shaft |
| Парткод: | 045-14075-005 |
| Деталь: | Bracket F Transfer Guide Plate |
| Парткод: | 045-14056-000 |
| Деталь: | Bracket R Transfer Guide Plate |
| Парткод: | 045-14074-009 |
| Деталь: | Joint Shaft R Transfer Guide |
| Парткод: | 045-14048-008 |
| Деталь: | Joint Shaft F Transfer Guide |
| Парткод: | 045-14047-001 |
| Деталь: | Fixing Screw |
| Парткод: | 045-11020-102 |
| Деталь: | MOTOR TD3357-240 |
| Парткод: | 490-20007-000 |
| Деталь: | Stopper Plate |
| Парткод: | 045-14046-005 |
| Деталь: | Bracket Transfer Motor |
| Парткод: | 045-14043-006 |
| Деталь: | Gear M1X34X9 |
| Парткод: | 612-30003-008 |
| Деталь: | Gear M1X24X12 |
| Парткод: | 612-30002-001 |
| Деталь: | *Plate Tension |
| Парткод: | 030-21363-005 |
| Деталь: | *Nip Spring |
| Парткод: | 045-14023-005 |
| Деталь: | *Holder Nip Spring |
| Парткод: | 045-14024-001 |
| Деталь: | *Pressure Adj. Plate |
| Парткод: | 045-14025-008 |
| Деталь: | *Base Plate R Pressure Adj. |
| Парткод: | 045-14062-000 |
| Деталь: | *Lever Cam Pressure Adj. |
| Парткод: | 045-14067-002 |
| Деталь: | *Hold Plate Lever Cam |
| Парткод: | 045-14068-009 |
| Деталь: | *Base Plate F Pressure Adj. |
| Парткод: | 045-14027-000 |
| Деталь: | *Guide Plate 1 |
| Парткод: | 045-14033-000 |
| Деталь: | Lever FL Guide Plate Release |
| Парткод: | 030-21502-005 |
| Деталь: | Shaft Guide Plate Release Lever |
| Парткод: | 045-14038-002 |
| Деталь: | *Roller Tension Upper 1 |
| Парткод: | 030-21491-003 |
| Деталь: | *Pin 2X12 |
| Парткод: | X-520 |
| Деталь: | *Release Lever |
| Парткод: | 045-14026-004 |
| Деталь: | *Metal F6X8X3 10X1 |
| Парткод: | 607-13003-002 |
| Деталь: | *Roller Tension Upper 2 |
| Парткод: | 030-21492-000 |
| Деталь: | *Shaft Roller Tension |
| Парткод: | 045-14022-009 |
| Деталь: | *Reinforce Plate Guide Plate 1 |
| Парткод: | 045-14052-005 |
| Деталь: | *Bracket Solenoid |
| Парткод: | 045-14028-007 |
| Деталь: | Solenoid TDS-12E-5006A |
| Парткод: | 490-50008-109 |
| Деталь: | *Spring Guide Plate |
| Парткод: | 045-14050-002 |
| Деталь: | *Guide Plate 2 |
| Парткод: | 045-14030-109 |
| Деталь: | *Bracket Guide Lock |
| Парткод: | 030-21479-003 |
| Деталь: | *Guide Lock |
| Парткод: | 030-21478-007 |
| Деталь: | *Shaft Hook |
| Парткод: | 045-14041-003 |
| Деталь: | *Plate Spring Guide |
| Парткод: | 045-14039-009 |
| Деталь: | *Spring Stay |
| Парткод: | 045-14029-003 |
| Деталь: | *Bearing DDLF-1910ZZR |
| Парткод: | 601-10195-004 |
| Деталь: | *Clutch HI-MIC5-11 |
| Парткод: | 490-51013-106 |
| Деталь: | *Stepped Screw 2.2 |
| Парткод: | 030-21003-009 |
| Деталь: | *Reinforce Plate Guide Plate 2 |
| Парткод: | 045-14051-009 |
| Деталь: | *Transfer Roller |
| Парткод: | 030-21477-000 |
| Деталь: | *Bracket Sensor |
| Парткод: | 045-14040-104 |
| Деталь: | *SENSOR COVER |
| Парткод: | 045-14078-004 |
| Деталь: | *Sensor PS117ED1 |
| Парткод: | 444-33006-000 |
| Деталь: | *Wire Harness Transfer Guide Unit |
| Парткод: | 045-14076-001 |
| Деталь: | GUIDE PLATE 3 |
| Парткод: | 045-14049-004 |
| Деталь: | Front door |
| Парткод: | 023-34005-308 |
| Деталь: | Emblem RZ970E |
| Парткод: | 045-34033-007 |
| Деталь: | Emblem RZ971A |
| Парткод: | 045-34034-003 |
| Деталь: | Emblem RV9690C |
| Парткод: | 045-34035-000 |
| Деталь: | Emblem RZ990U |
| Парткод: | 045-34036-006 |
| Деталь: | Emblem RZ977E |
| Парткод: | 045-34037-002 |
| Деталь: | Emblem RZ977A |
| Парткод: | 045-34038-009 |
| Деталь: | Emblem RV9698C |
| Парткод: | 045-34039-005 |
| Деталь: | Emblem RZ997U |
| Парткод: | 045-34040-003 |
| Деталь: | MAGNET CATCH |
| Парткод: | 021-11220-100 |
| Деталь: | Cover Catch |
| Парткод: | 660-05106-002 |
| Деталь: | Door Catch |
| Парткод: | 660-05105-006 |
| Деталь: | Fixed Plate Rotary Catch |
| Парткод: | 021-11140-106 |
| Деталь: | FRONT COVER |
| Парткод: | 045-34001-008 |
| Деталь: | Ink Replace Instruction Sticker Pic |
| Парткод: | 023-17305-004 |
| Деталь: | Seal Counter Eng. |
| Парткод: | 021-04050-002 |
| Деталь: | SEAL COUNTER PIC. |
| Парткод: | 021-04051-009 |
| Деталь: | Seal M.-M. Unit Release Pic. |
| Парткод: | 045-34041-000 |
| Деталь: | Seal M.-M. Unit Release Eng. |
| Парткод: | 045-34042-006 |
| Деталь: | Seal M.-M. Unit Release Ch. |
| Парткод: | 045-34043-002 |
| Деталь: | Cover Master Loading |
| Парткод: | 023-34015-001 |
| Деталь: | Hinge Top Front Door |
| Парткод: | 023-34006-207 |
| Деталь: | Hinge Bottom Front Door |
| Парткод: | 023-34007-203 |
| Деталь: | Panel Cover Bottom |
| Парткод: | 045-37027-008 |
| Деталь: | Side Cover Paper Ejection Side |
| Парткод: | 023-34030-000 |
| Деталь: | Cover Scanner P.-Rcv. Side |
| Парткод: | 023-34041-100 |
| Деталь: | Side Cover Paper Feeding Side |
| Парткод: | 023-34032-100 |
| Деталь: | Cover Scanner P. Feeding Side |
| Парткод: | 045-34004-007 |
| Деталь: | Side Cover Rear R |
| Парткод: | 045-34021-009 |
| Деталь: | REAR COVER SCANNER |
| Парткод: | 045-34005-100 |
| Деталь: | Side Cover Rear L |
| Парткод: | 045-34022-005 |
| Деталь: | Rear Cover RZ5 |
| Парткод: | 023-34101-200 |
| Деталь: | Bracket Lower Rear Cover |
| Парткод: | 023-34024-108 |
| Деталь: | Bracket Upper L Rear Cover |
| Парткод: | 045-34025-004 |
| Деталь: | Bracket Upper R Rear Cover |
| Парткод: | 045-34026-000 |
| Деталь: | Seal Magnet Adjuster |
| Парткод: | 023-34054-007 |
| Деталь: | SHEET FRONT DOOR DET. SENSOR |
| Парткод: | 699-04003-107 |
| Деталь: | Blind Cover |
| Парткод: | 045-34003-000 |
| Деталь: | S.-Reduction Sponge Paper Ejection (F/R) |
| Парткод: | 045-34047-008 |
| Деталь: | S.-Reduction Sponge Paper Ejection (Side) |
| Парткод: | 045-34046-001 |
| Деталь: | S.-Reduction Sponge Paper Eje. Cover (R) |
| Парткод: | 045-34049-000 |
| Деталь: | S.-Reduction Sponge Paper Eje. Cover (L) |
| Парткод: | 045-34048-004 |
| Деталь: | S.-Reduction Sponge Bottom (Side) |
| Парткод: | 045-34050-009 |
| Деталь: | S.-Reduction Sponge MTPF Bottom (Side) |
| Парткод: | 045-34114-007 |
| Деталь: | S.-Reduction Sponge Panel |
| Парткод: | 045-34045-005 |
| Деталь: | S.-Reduction Sponge Front Lower |
| Парткод: | 045-34052-001 |
| Деталь: | S.-Reduction Sponge MTPF Front Lower |
| Парткод: | 045-34112-004 |
| Деталь: | S.-Reduction Sponge Rear Lower |
| Парткод: | 045-34051-005 |
| Деталь: | S.-Reduction Sponge MTPF Rear Lower |
| Парткод: | 045-34113-000 |
| Деталь: | S.-Reduction Sponge Drive |
| Парткод: | 045-34014-002 |
| Деталь: | Frame End Fence |
| Парткод: | 030-22067-205 |
| Деталь: | Rail End Fence |
| Парткод: | 045-22006-004 |
| Деталь: | Actuator Fence SW |
| Парткод: | 030-22039-007 |
| Деталь: | Plate Actuator |
| Парткод: | 030-22048-006 |
| Деталь: | Spring End SW |
| Парткод: | 030-22027-009 |
| Деталь: | End Fence Bracket |
| Парткод: | 045-22015-003 |
| Деталь: | Edging Saddle ES-0505-2 |
| Парткод: | 665-04061-001 |
| Деталь: | Lock Ring JRE4 |
| Парткод: | 634-00003-000 |
| Деталь: | FLANGE |
| Парткод: | 030-22007-008 |
| Деталь: | Pulley 2 |
| Парткод: | 030-22002-006 |
| Деталь: | PULLEY 3 |
| Парткод: | 030-22003-002 |
| Деталь: | PULLEY 5 |
| Парткод: | 030-22058-001 |
| Деталь: | Tension Plate |
| Парткод: | 030-22008-004 |
| Деталь: | Stepped Screw M4X6 |
| Парткод: | 030-22029-001 |
| Деталь: | Spring Tension Plate |
| Парткод: | 030-22031-006 |
| Деталь: | Belt 60S3M825 |
| Парткод: | 620-00008-007 |
| Деталь: | Clamp Belt End |
| Парткод: | 030-22022-007 |
| Деталь: | Actuator SW Cam |
| Парткод: | 045-22007-000 |
| Деталь: | SW Cam AS |
| Парткод: | 045-22009-003 |
| Деталь: | Belt Slider M AS |
| Парткод: | 045-22008-007 |
| Деталь: | Slide Base AS |
| Парткод: | 045-22012-004 |
| Деталь: | Spring AS Slide Base |
| Парткод: | 045-22013-000 |
| Деталь: | Slide Plate L AS |
| Парткод: | 045-22014-007 |
| Деталь: | Rail Slider M AS |
| Парткод: | 045-22011-008 |
| Деталь: | Slide Plate U AS |
| Парткод: | 045-22010-001 |
| Деталь: | Gear Box End |
| Парткод: | 030-22070-001 |
| Деталь: | Gear 1 End |
| Парткод: | 030-22014-004 |
| Деталь: | 17PM-K046-G1ST |
| Парткод: | 490-33013-204 |
| Деталь: | Pin 2X12 |
| Парткод: | X-520 |
| Деталь: | TPF-613ZZ-5 |
| Парткод: | 609-00003-008 |
| Деталь: | Gear 2 End |
| Парткод: | 030-22016-007 |
| Деталь: | Shaft 5 End |
| Парткод: | 030-22012-001 |
| Деталь: | METAL 1 |
| Парткод: | 030-22073-000 |
| Деталь: | Bracket Sensor 1 |
| Парткод: | 030-22020-101 |
| Деталь: | EE-SX1235A-P2 |
| Парткод: | 444-30006-000 |
| Деталь: | KR1207-AALF |
| Парткод: | 444-43006-106 |
| Деталь: | AF Wire Harness 1 |
| Парткод: | 045-22202-008 |
| Деталь: | D3M-01L2-3 |
| Парткод: | 444-12000-002 |
| Деталь: | AF Wire Harness 2 |
| Парткод: | 045-22203-004 |
| Деталь: | Edging Saddle LES-1010 |
| Парткод: | 665-04062-008 |
| Деталь: | Panel Unit RZ9 Eng. |
| Парткод: | 045-75321-050 |
| Деталь: | Panel Unit RZ9 Pic. |
| Парткод: | 045-75322-056 |
| Деталь: | Panel Unit RZ9 Ch. |
| Парткод: | 045-75323-052 |
| Деталь: | *Frame Panel |
| Парткод: | 045-37026-109 |
| Деталь: | *Sheet Panel Mode Key Eng. |
| Парткод: | 045-37013-007 |
| Деталь: | *Sheet Panel Mode Key Pic. |
| Парткод: | 045-37014-003 |
| Деталь: | *Sheet Panel Mode Key Ch. |
| Парткод: | 045-37015-000 |
| Деталь: | *Sheet Print Control Eng. |
| Парткод: | 045-37017-002 |
| Деталь: | *Sheet Print Control Pic. |
| Парткод: | 045-37018-009 |
| Деталь: | *Sheet Print Control Ch. |
| Парткод: | 045-37019-005 |
| Деталь: | *Numeric Display Cover |
| Парткод: | 045-37020-003 |
| Деталь: | *Wake-Up Key |
| Парткод: | 023-37056-000 |
| Деталь: | *Reset Key Eng. |
| Парткод: | 023-37046-005 |
| Деталь: | *Reset Key Pic. |
| Парткод: | 023-37047-001 |
| Деталь: | *Reset Key Ch. |
| Парткод: | 023-37048-008 |
| Деталь: | *Stop Key Eng. |
| Парткод: | 023-37036-000 |
| Деталь: | *Stop Key Pic. |
| Парткод: | 023-37037-006 |
| Деталь: | *Stop Key Ch. |
| Парткод: | 023-37038-002 |
| Деталь: | *Print Mode Key |
| Парткод: | 023-37050-100 |
| Деталь: | *Test Print Key Eng. |
| Парткод: | 023-37041-003 |
| Деталь: | *Test Print Key Pic. |
| Парткод: | 023-37042-000 |
| Деталь: | *Test Print Key Ch. |
| Парткод: | 023-37043-006 |
| Деталь: | *Start Key Eng. |
| Парткод: | 023-37031-008 |
| Деталь: | *Start Key Pic. |
| Парткод: | 023-37032-004 |
| Деталь: | *Start Key Ch. |
| Парткод: | 023-37033-108 |
| Деталь: | *Print Control Key |
| Парткод: | 045-37004-105 |
| Деталь: | *Numeric Key |
| Парткод: | 045-37005-101 |
| Деталь: | *Print Position Center Key |
| Парткод: | 045-37006-108 |
| Деталь: | *Print Position Adj. Key |
| Парткод: | 045-37007-104 |
| Деталь: | *Touch Panel Cover |
| Парткод: | 045-37003-109 |
| Деталь: | *Panel Upper Cover |
| Парткод: | 045-37002-005 |
| Деталь: | *Display Mode Key Eng. |
| Парткод: | 024-37344-003 |
| Деталь: | *Display Mode Key Pic. |
| Парткод: | 024-37345-000 |
| Деталь: | *Display Mode Key Ch. |
| Парткод: | 024-37346-006 |
| Деталь: | *Shield Mylar Sheet C Mode Key |
| Парткод: | 045-37023-002 |
| Деталь: | *Mode Key PCB |
| Парткод: | 024-37137-105 |
| Деталь: | *Shield Mylar Sheet B SW PCB |
| Парткод: | 045-37022-006 |
| Деталь: | *SW PCB |
| Парткод: | 045-37001-106 |
| Деталь: | *Shield Mylar Sheet A Sub-SW PCB |
| Парткод: | 045-37021-000 |
| Деталь: | *Sub-SW PCB |
| Парткод: | 045-37028-004 |
| Деталь: | *Grounding Plate A Panel |
| Парткод: | 045-37024-009 |
| Деталь: | *LCD Control Unit |
| Парткод: | 023-43775-400 |
| Деталь: | *Grounding Plate B Panel |
| Парткод: | 045-37025-005 |
| Деталь: | Wire Harness Panel Unit |
| Парткод: | 045-53008-005 |
| Деталь: | Bracket Front Cover SW |
| Парткод: | 045-34002-004 |
| Деталь: | Magnet Catch SM-50P |
| Парткод: | 660-05000-018 |
| Деталь: | Bracket Sensor Front Cover |
| Парткод: | 023-34053-205 |
| Деталь: | SENSOR LG285D1 |
| Парткод: | 444-30010-007 |
| Деталь: | Main Power SW Assy |
| Парткод: | 045-50032-002 |
| Деталь: | Bracket Rf-Tag PCB |
| Парткод: | 023-50024-002 |
| Деталь: | RF-Tag PCB |
| Парткод: | 045-50007-202 |
| Деталь: | Wire Harness Front Lower |
| Парткод: | 045-53004-000 |
| Деталь: | Wire Harness D-Drawer H |
| Парткод: | 045-53013-009 |
| Деталь: | Wire Harness Master Rf-Tag |
| Парткод: | 023-53003-006 |
| Деталь: | Bracket Counter |
| Парткод: | 023-50022-000 |
| Деталь: | COUNTER |
| Парткод: | 492-00001-108 |
| Деталь: | Wire Harness Main Power SW |
| Парткод: | 045-50031-006 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | Square bushing |
| Парткод: | 665-04002-005 |
| Деталь: | SB-6025 |
| Парткод: | 665-04055-001 |
| Деталь: | *Ferrite Core |
| Парткод: | 435-00047-004 |
| Деталь: | Pressure Roller Assy |
| Парткод: | 045-75295-059 |
| Деталь: | Guide Roller Assy (21-29) |
| Парткод: | 045-75288-052 |
| Деталь: | Guide PLate (Upper) Assy |
| Парткод: | 045-75286-050 |
| Деталь: | Guide Plate (Middle) Assy (39-44) |
| Парткод: | 045-75287-056 |
| Деталь: | Stripper Unit (47-69) |
| Парткод: | 024-75072-050 |
| Деталь: | *Unit/Stripper Pad |
| Парткод: | 019-91740-003 |
| Деталь: | *Pressure Shaft |
| Парткод: | 045-75324-059 |
| Деталь: | *Stopper |
| Парткод: | 045-19012-001 |
| Деталь: | *Shaft |
| Парткод: | 024-19004-009 |
| Деталь: | *Pressure Roller Support |
| Парткод: | 023-75071-056 |
| Деталь: | *Pressure Roller Support |
| Парткод: | 023-75072-052 |
| Деталь: | *Pressure Roller A3 |
| Парткод: | 024-75080-052 |
| Деталь: | *Stepped Screw |
| Парткод: | 635-17613-209 |
| Деталь: | Metal |
| Парткод: | 607-10003-001 |
| Деталь: | TIMING ROLLER |
| Парткод: | 045-12501-007 |
| Деталь: | COLLAR |
| Парткод: | 023-12510-009 |
| Деталь: | Load Spring |
| Парткод: | 030-14476-201 |
| Деталь: | TUBE |
| Парткод: | 030-14480-004 |
| Деталь: | Fix Plate |
| Парткод: | 030-14458-300 |
| Деталь: | P Washer |
| Парткод: | 639-00610-000 |
| Деталь: | BEARING |
| Парткод: | 601-10195-004 |
| Деталь: | Adj. Plate |
| Парткод: | 023-12507-105 |
| Деталь: | Metal |
| Парткод: | 607-16001-000 |
| Деталь: | COLLAR |
| Парткод: | 634-10404-100 |
| Деталь: | BEARING |
| Парткод: | 023-12503-100 |
| Деталь: | COLLAR |
| Парткод: | 634-10403-104 |
| Деталь: | *Guide Roller |
| Парткод: | 024-12531-208 |
| Деталь: | *Support F |
| Парткод: | 023-12515-000 |
| Деталь: | *Adj. Plate |
| Парткод: | 023-12545-007 |
| Деталь: | *METAL |
| Парткод: | 607-40001-003 |
| Деталь: | *Lock Plate |
| Парткод: | 023-12519-006 |
| Деталь: | *Support R |
| Парткод: | 023-12516-104 |
| Деталь: | *Pressure Shaft |
| Парткод: | 023-12513-105 |
| Деталь: | *Shaft |
| Парткод: | 045-12518-007 |
| Деталь: | *Pressure Plate |
| Парткод: | 024-12530-007 |
| Деталь: | BRACKET F |
| Парткод: | 045-12509-008 |
| Деталь: | BRACKET R |
| Парткод: | 045-12510-006 |
| Деталь: | BRACKET |
| Парткод: | 045-12517-000 |
| Деталь: | *Guide Plate (Upper) |
| Парткод: | 045-12512-009 |
| Деталь: | *Multiple Sensor Shield |
| Парткод: | 024-12519-100 |
| Деталь: | *Cover |
| Парткод: | 024-12510-200 |
| Деталь: | *Sensor |
| Парткод: | 444-42022-108 |
| Деталь: | *Wire Harness |
| Парткод: | 045-12602-008 |
| Деталь: | WIRE HARNESS |
| Парткод: | 045-12601-001 |
| Деталь: | *Wire Harness |
| Парткод: | 045-12603-004 |
| Деталь: | *Wire Harness |
| Парткод: | 045-12611-007 |
| Деталь: | *Sensor |
| Парткод: | 444-42021-101 |
| Деталь: | *Bracket |
| Парткод: | 045-12508-001 |
| Деталь: | *Cover L |
| Парткод: | 045-12511-002 |
| Деталь: | *Guide Plate (Middle) |
| Парткод: | 045-12504-103 |
| Деталь: | Guide Plate (Lower) |
| Парткод: | 045-12502-100 |
| Деталь: | BACK COVER |
| Парткод: | 023-12543-004 |
| Деталь: | *Spring |
| Парткод: | 023-12429-104 |
| Деталь: | *Spring Tension |
| Парткод: | 023-12403-008 |
| Деталь: | *Base |
| Парткод: | 024-12401-100 |
| Деталь: | *Guide Block Front |
| Парткод: | 023-12431-001 |
| Деталь: | *Unfix Lever |
| Парткод: | 023-12430-005 |
| Деталь: | *Lock |
| Парткод: | 030-14521-002 |
| Деталь: | *Lock Lever |
| Парткод: | 023-12428-000 |
| Деталь: | *Ground Spring |
| Парткод: | 018-31614-001 |
| Деталь: | *ARM |
| Парткод: | 023-12412-007 |
| Деталь: | *Bracket |
| Парткод: | 023-12402-109 |
| Деталь: | *Housing |
| Парткод: | 023-12408-301 |
| Деталь: | *Shaft |
| Парткод: | 023-12404-306 |
| Деталь: | **Cover F |
| Парткод: | 019-11832-000 |
| Деталь: | **Base F |
| Парткод: | 019-11831-100 |
| Деталь: | **Stripper Pad |
| Парткод: | 019-11833-006 |
| Деталь: | *Stepped Screw |
| Парткод: | 635-17624-006 |
| Деталь: | *Stripper Cam |
| Парткод: | 024-12403-005 |
| Деталь: | *Stripper ADJ Arm |
| Парткод: | 024-12405-008 |
| Деталь: | *Plate |
| Парткод: | 024-12406-004 |
| Деталь: | *Worm Gear Box |
| Парткод: | 023-12409-200 |
| Деталь: | *Shaft |
| Парткод: | 024-12404-109 |
| Деталь: | *Adjuster Dial |
| Парткод: | 023-12405-000 |
| Деталь: | Part Name |
| Парткод: | Part No. |
| Деталь: | *Roller Pick-up |
| Парткод: | 030-21016-100 |
| Деталь: | *Lock Ring Roller |
| Парткод: | 030-21203-105 |
| Деталь: | *Bearing TPF-816ZZ-5 |
| Парткод: | 609-00002-001 |
| Деталь: | *Metal 8 |
| Парткод: | 607-60002-006 |
| Деталь: | *Bracket Paper Feed Shaft |
| Парткод: | 030-21329-109 |
| Деталь: | Bracket Pick-up Roller |
| Парткод: | 030-21328-102 |
| Деталь: | *Shaft Paper Feed |
| Парткод: | 033-12188-103 |
| Деталь: | Shaft Pick-Up Roller |
| Парткод: | 030-21026-203 |
| Деталь: | *Pin 2X12 |
| Парткод: | X-520 |
| Деталь: | *Pulley Paper Feed |
| Парткод: | 030-21330-000 |
| Деталь: | *Belt 60S3M150 |
| Парткод: | 620-00004-001 |
| Деталь: | *Base Bracket Separation |
| Парткод: | 033-12137-002 |
| Деталь: | *Cam Stripper |
| Парткод: | 033-12142-006 |
| Деталь: | *Shaft P-Adjust |
| Парткод: | 033-12152-109 |
| Деталь: | *Shaft Stripper Angle |
| Парткод: | 033-12151-005 |
| Деталь: | *Base Plunger |
| Парткод: | 033-12154-004 |
| Деталь: | *Spring Plunger |
| Парткод: | 033-12155-000 |
| Деталь: | *Plunger Pin |
| Парткод: | 033-12156-007 |
| Деталь: | *Spring P-Release |
| Парткод: | 033-12146-001 |
| Деталь: | *Lever P-Release |
| Парткод: | 033-12144-009 |
| Деталь: | *Gear Stripper Angle |
| Парткод: | 033-12148-004 |
| Деталь: | *Bracket Separation 2 |
| Парткод: | 033-12143-002 |
| Деталь: | *Stepped Screw 6X2.2 M4X2.5 |
| Парткод: | 635-17624-006 |
| Деталь: | *Bracket P-Release |
| Парткод: | 033-12145-005 |
| Деталь: | *Stepped Screw 5X2 M3X3 |
| Парткод: | 635-17523-102 |
| Деталь: | *Lever P-Adjust |
| Парткод: | 033-12149-000 |
| Деталь: | *Bracket Separation |
| Парткод: | 033-12141-000 |
| Деталь: | *Spacer1 |
| Парткод: | 033-12068-000 |
| Деталь: | *Spring Separation |
| Парткод: | 030-21343-004 |
| Деталь: | *Shaft Stripper |
| Парткод: | 033-12206-004 |
| Деталь: | *Holder Separation Pad |
| Парткод: | 030-21339-007 |
| Деталь: | *Stripper Pad Foam |
| Парткод: | 030-14376-002 |
| Деталь: | *Stay Transfer Unit Lower |
| Парткод: | 033-12147-008 |
| Деталь: | *Cushion Rubber F12-5404 |
| Парткод: | 030-21352-003 |
| Деталь: | *Stopper Upper Unit |
| Парткод: | 033-12009-004 |
| Деталь: | *Guide Plate Lower 2 |
| Парткод: | 030-21381-100 |
| Деталь: | *Brush Roller Cleaner 2 |
| Парткод: | 030-21349-100 |
| Деталь: | *Plate Passage Sensor |
| Парткод: | 030-21385-009 |
| Деталь: | *Sensor GP2A25J0000F |
| Парткод: | 443-32005-100 |
| Деталь: | *Bracket Switch |
| Парткод: | 030-21407-002 |
| Деталь: | *Tray Safety SW |
| Парткод: | 045-53027-000 |
| Деталь: | Junction Harness Pick-up Sensor |
| Парткод: | 033-12255-005 |
| Деталь: | *Wire Harness H MTPF |
| Парткод: | 045-14077-008 |
| Деталь: | *Cable Clamp UAMS-09-0 |
| Парткод: | 665-02067-002 |
| Деталь: | *Stepped Screw Guide Plate 4611 |
| Парткод: | 030-21419-000 |
| Деталь: | *Bearing DDLF-1910ZZR |
| Парткод: | 601-10195-004 |
| Деталь: | *Stay Paper Feed |
| Парткод: | 033-12192-003 |
| Деталь: | Spring Pick-Up Roller |
| Парткод: | 030-21418-004 |
| Деталь: | *Shaft Paper Sensor |
| Парткод: | 030-21347-000 |
| Деталь: | *Spring Paper Sensor |
| Парткод: | 030-21348-006 |
| Деталь: | *Clip JRE3 |
| Парткод: | 634-00002-004 |
| Деталь: | *Bracket Paper Sensor |
| Парткод: | 033-12196-009 |
| Деталь: | *Base Plate Upper Limit Adj. |
| Парткод: | 033-12193-000 |
| Деталь: | *Base Upper Limit Adj. Screw |
| Парткод: | 030-14347-002 |
| Деталь: | *GP1A73AJ0000F |
| Парткод: | 444-30000-109 |
| Деталь: | *Slide Plate Upper Limit Adj. |
| Парткод: | 033-12194-006 |
| Деталь: | *Spacer 2 |
| Парткод: | 033-12200-006 |
| Деталь: | *Shaft Upper Limit Adj. |
| Парткод: | 033-12195-002 |
| Деталь: | *Knob Upper Limit Adj. |
| Парткод: | 033-12198-001 |
| Деталь: | *Bracket Wire Harness |
| Парткод: | 033-12191-007 |
| Деталь: | *Link JAM release 1 |
| Парткод: | 030-21395-004 |
| Деталь: | *Link JAM release 2 |
| Парткод: | 030-21396-000 |
| Деталь: | *Guide Plate Lower 1 |
| Парткод: | 030-21376-000 |
| Деталь: | *Spring Guide Front |
| Парткод: | 030-21416-001 |
| Деталь: | *Spring Guide Rear |
| Парткод: | 030-21417-008 |
| Деталь: | *Roller Paper Feed |
| Парткод: | 033-12229-004 |
| Деталь: | Mech.-Control PCB SU |
| Парткод: | 045-75280-051 |
| Деталь: | Wire Harness Upper |
| Парткод: | 045-53003-003 |
| Деталь: | Wire Harness Rear Lower |
| Парткод: | 045-53005-006 |
| Деталь: | Wire Harness Front Lower |
| Парткод: | 045-53004-000 |
| Деталь: | Wire Harness Paper Ejection Rear |
| Парткод: | 045-53006-002 |
| Деталь: | Unit / Stage Cover(1-6) |
| Парткод: | 023-75113-050 |
| Деталь: | *Stage Cover |
| Парткод: | 023-30008-000 |
| Деталь: | Stage Pad 2 Stage Cover |
| Парткод: | 023-30075-000 |
| Деталь: | *Frame Stage Cover |
| Парткод: | 023-30007-004 |
| Деталь: | *Original Holder Cover (Upper) Stage Cover |
| Парткод: | 018-16411-307 |
| Деталь: | *Actuator Plate Stage cover Actuator |
| Парткод: | 023-30006-008 |
| Деталь: | *Stage Cover Hinge Assy 3 |
| Парткод: | 023-30070-105 |
| Деталь: | Support Bracket FB Scanner |
| Парткод: | 045-10009-008 |
| Деталь: | Panel Board Main Frame |
| Парткод: | 023-10010-106 |
| Деталь: | Scanner Stay Main Frame |
| Парткод: | 023-10007-008 |
| Деталь: | Upper Stay Drum |
| Парткод: | 023-10012-109 |
| Деталь: | Stay Master Making Main Frame |
| Парткод: | 045-10004-006 |
| Деталь: | Main Stay Main Frame |
| Парткод: | 045-10006-106 |
| Деталь: | Lower Stay Drum |
| Парткод: | 045-10005-002 |
| Деталь: | Bottom Plate Main Frame |
| Парткод: | 045-10007-005 |
| Деталь: | Stay Paper Feeding Main Frame |
| Парткод: | 023-10005-005 |
| Деталь: | Bottom Stay Main Frame |
| Парткод: | 023-10003-002 |
| Деталь: | Spacer Rubber Foot |
| Парткод: | 023-10018-000 |
| Деталь: | RUBBER FOOT |
| Парткод: | 660-01015-100 |
| Деталь: | Noise Absorber Bottom Main Frame |
| Парткод: | 023-10024-000 |
| Деталь: | Transportation Support Plate |
| Парткод: | 023-10008-004 |
| Деталь: | Lifting Handle |
| Парткод: | 023-10017-100 |
| Деталь: | Stopper lifting Handle |
| Парткод: | 023-10030-000 |
| Деталь: | Cover Guide Roller |
| Парткод: | 023-12542-202 |
| Деталь: | Noise Absorber Guide Roller Cover |
| Парткод: | 023-12544-108 |
| Деталь: | Lower Cover Paper Feed |
| Парткод: | 045-10013-005 |
| Деталь: | Cover Main Motor |
| Парткод: | 045-10011-002 |
| Деталь: | STAY GUIDE PLATE |
| Парткод: | 023-12536-105 |
| Деталь: | Stopper M.-M. Unit |
| Парткод: | 023-28358-002 |
| Деталь: | Protection Plate Wire Harness M.-M. |
| Парткод: | 023-28408-000 |
| Деталь: | Support Plate F P.-Rcv.-T. |
| Парткод: | 023-21641-400 |
| Деталь: | Support Plate R P.-Rcv.-T. |
| Парткод: | 023-21642-406 |
| Деталь: | Magnet Catch P.-Rcv.-T. |
| Парткод: | 023-21622-006 |
| Деталь: | Wire Saddle LWS-1316 |
| Парткод: | 665-02043-006 |
| Деталь: | Edging Saddle LES-25L |
| Парткод: | 665-00308-002 |
| Деталь: | Reinforce Plate Pressure Roller Frame |
| Парткод: | 045-10008-001 |
| Деталь: | Guide Cover Front |
| Парткод: | 045-10014-001 |
| Деталь: | Guide Cover Rear |
| Парткод: | 045-10015-008 |
| Деталь: | COVER WIRE HARNESS |
| Парткод: | 045-10017-000 |
| Деталь: | TRAY UNIT SU |
| Парткод: | 045-75310-058 |
| Деталь: | *Guide Support Assy SU |
| Парткод: | 045-75311-054 |
| Деталь: | *Frame Tray |
| Парткод: | 033-12161-302 |
| Деталь: | *Bracket Separation |
| Парткод: | 030-21314-101 |
| Деталь: | *Lever Tray Lock |
| Парткод: | 030-21315-108 |
| Деталь: | *Stay Guide |
| Парткод: | 030-21301-107 |
| Деталь: | *Stopper Table |
| Парткод: | 030-21302-006 |
| Деталь: | *Drawer Cover |
| Парткод: | 033-12016-000 |
| Деталь: | *End Fence Fixed |
| Парткод: | 033-12164-000 |
| Деталь: | *Slider Wire 2 |
| Парткод: | 030-21261-008 |
| Деталь: | *Bracket Wire 2 |
| Парткод: | 030-21260-109 |
| Деталь: | *Bracket Wire Fixation |
| Парткод: | 030-21262-101 |
| Деталь: | *Idler Pulley |
| Парткод: | 030-21266-000 |
| Деталь: | *Holder Pulley R |
| Парткод: | 030-21270-104 |
| Деталь: | *Wire Tray |
| Парткод: | 030-21020-000 |
| Деталь: | *Metal 8 |
| Парткод: | 607-60002-006 |
| Деталь: | *Pin 2X12 |
| Парткод: | X-520 |
| Деталь: | *Pulley Wire F 12X5404 |
| Парткод: | 030-21258-007 |
| Деталь: | *Plate Pulley Wire F12-5404 |
| Парткод: | 030-21259-100 |
| Деталь: | *Shaft Drive |
| Парткод: | 030-21073-104 |
| Деталь: | *Holder Drum Wire |
| Парткод: | 030-21208-000 |
| Деталь: | *Slider Wire 1 |
| Парткод: | 030-21264-007 |
| Деталь: | *Bracket Wire 1 |
| Парткод: | 030-21263-108 |
| Деталь: | *Holder Pulley F |
| Парткод: | 030-21267-103 |
| Деталь: | *Gear Damper |
| Парткод: | 030-21265-003 |
| Деталь: | *Bracket Damper |
| Парткод: | 030-21312-109 |
| Деталь: | *TM-189-4HG |
| Парткод: | 610-00020-000 |
| Деталь: | **Pin Support |
| Парткод: | 030-21319-103 |
| Деталь: | **Guide Support |
| Парткод: | 030-21061-009 |
| Деталь: | **Lever Ratchet 1 |
| Парткод: | 030-21317-100 |
| Деталь: | **Lever Ratchet |
| Парткод: | 030-21316-104 |
| Деталь: | **Spring Lock |
| Парткод: | 030-21318-000 |
| Деталь: | *Bracket Tray |
| Парткод: | 030-21303-100 |
| Деталь: | *Wire Harness Tray 1 |
| Парткод: | 033-12246-405 |
| Деталь: | Junction Wire Harness Tray |
| Парткод: | 033-12248-106 |
| Деталь: | *Base Plate Tray |
| Парткод: | 030-21304-106 |
| Деталь: | *Sensor GP2A25J0000F |
| Парткод: | 443-32005-100 |
| Деталь: | *Plate Sensor |
| Парткод: | 030-21307-105 |
| Деталь: | *Sensor GP1A73AJ000F |
| Парткод: | 444-30000-109 |
| Деталь: | *Bracket Paper Det. Sensor |
| Парткод: | 033-12011-009 |
| Деталь: | *Cushion Tray |
| Парткод: | 030-21309-108 |
| Деталь: | *Cushion Tray 1 |
| Парткод: | 030-21310-009 |
| Деталь: | *Cover Base Plate |
| Парткод: | 030-21311-200 |
| Деталь: | *Seal Size |
| Парткод: | 030-04025-007 |
| Деталь: | *L.O. Sheet |
| Парткод: | 030-21306-001 |
| Деталь: | *Bushing NB-9.5 |
| Парткод: | 665-04063-004 |
| Деталь: | *Bracket Potentiometer Slide |
| Парткод: | 030-21207-003 |
| Деталь: | *Cover Potentiometer |
| Парткод: | 030-21291-101 |
| Деталь: | *Cover Belt |
| Парткод: | 030-21292-108 |
| Деталь: | *Pulley Potentiometer |
| Парткод: | 030-21288-003 |
| Деталь: | *Belt 40-S2M-630 |
| Парткод: | 621-00002-006 |
| Деталь: | *Potentiometer Assy 2 |
| Парткод: | 030-51093-100 |
| Деталь: | *Shaft Slider |
| Парткод: | 030-21290-105 |
| Деталь: | *Seal Lock |
| Парткод: | 030-04038-109 |
| Деталь: | Seal Side Guide Lock |
| Парткод: | 030-04128-108 |
| Деталь: | *Plate Lock 1 |
| Парткод: | 030-21059-101 |
| Деталь: | *Spring Latch |
| Парткод: | 030-21295-000 |
| Деталь: | *Plate Spring Lock F |
| Парткод: | 030-21296-006 |
| Деталь: | *Latch Lock 1 |
| Парткод: | 030-21055-009 |
| Деталь: | *Lever Lock 2 |
| Парткод: | 030-21204-004 |
| Деталь: | *Lever Lock 1 |
| Парткод: | 030-21297-002 |
| Деталь: | *Bracket Side Guide F2 |
| Парткод: | 030-21051-003 |
| Деталь: | *Guide Assy Front |
| Парткод: | 030-21278-105 |
| Деталь: | *Holder Guide 2 |
| Парткод: | 030-21206-104 |
| Деталь: | *Plate Belt Fixation |
| Парткод: | 030-21289-107 |
| Деталь: | *Plate Lock 2 |
| Парткод: | 030-21060-100 |
| Деталь: | *Bracket Side Guide R2 |
| Парткод: | 030-21052-000 |
| Деталь: | *Latch Lock 2 |
| Парткод: | 030-21056-005 |
| Деталь: | *Plate Spring Lock R |
| Парткод: | 030-21299-005 |
| Деталь: | *Guide Assy Rear |
| Парткод: | 030-21283-109 |
| Деталь: | *Holder Guide 1 |
| Парткод: | 030-21205-108 |
| Деталь: | *Stepped Screw 2.2 |
| Парткод: | 030-21300-100 |
| Деталь: | *Latch Guide |
| Парткод: | 030-21276-005 |
| Деталь: | *Bracket Slide |
| Парткод: | 033-12168-005 |
| Деталь: | *Wire Harness FG |
| Парткод: | 030-51168-100 |
| Деталь: | *Seal MAX |
| Парткод: | 030-04026-003 |
| Деталь: | *Wire Saddle LWS-1SL |
| Парткод: | 665-02066-006 |
| Деталь: | Part Name |
| Парткод: | Part No. |
| Деталь: | Master Removal Unit (Fig25,Fig26) |
| Парткод: | 023-75135-259 |
| Деталь: | *Housing M.-Rmv. |
| Парткод: | 023-24021-305 |
| Деталь: | *Bracket Housing M.-RMV. |
| Парткод: | 023-24128-002 |
| Деталь: | *Shaft M-Rmv Guide |
| Парткод: | 023-24144-105 |
| Деталь: | *M-Rmv Guide A |
| Парткод: | 023-24145-004 |
| Деталь: | *M-Rmv Guide B |
| Парткод: | 023-24146-000 |
| Деталь: | *Spring M-Rmv Guide |
| Парткод: | 023-24147-007 |
| Деталь: | *Hook F M-Rmv Roller |
| Парткод: | 023-24130-007 |
| Деталь: | *Hook R M-Rmv Roller |
| Парткод: | 023-24131-003 |
| Деталь: | *Spring Hook R Trans. Roller M-Rmv |
| Парткод: | 023-24137-001 |
| Деталь: | *Shaft Plate Pulley M-Rmv |
| Парткод: | 023-24066-104 |
| Деталь: | *Holding Plate Pulley M.-Rmv. |
| Парткод: | 023-24129-009 |
| Деталь: | *Plate M.-Rmv. Pulley |
| Парткод: | 023-24062-109 |
| Деталь: | *Pulley M-Rmv |
| Парткод: | 023-24061-102 |
| Деталь: | *Shaft Pulley M-Rmv |
| Парткод: | 023-24063-300 |
| Деталь: | *Spring Plate Pulley M-Rmv |
| Парткод: | 023-24067-003 |
| Деталь: | *Transfer Belt 2 2X140 |
| Парткод: | 628-21401-009 |
| Деталь: | *Master Removal Roller (UP) |
| Парткод: | 023-24057-105 |
| Деталь: | *Pulley Shaft M.-Rmv |
| Парткод: | 023-24025-300 |
| Деталь: | *Metal F6X10X6.5 12X1.5 |
| Парткод: | 607-10009-000 |
| Деталь: | *Spring A Front M-Rmv. Roller |
| Парткод: | 023-24058-004 |
| Деталь: | *Spring A Rear M-Rmv Roller |
| Парткод: | 023-24059-000 |
| Деталь: | *Gear M1.25X22 |
| Парткод: | 612-10001-009 |
| Деталь: | *Gear M1.25X12 |
| Парткод: | 612-10002-005 |
| Деталь: | *Gear M1.25X9 |
| Парткод: | 612-10003-001 |
| Деталь: | *Bracket Master Loading Sensor A3 |
| Парткод: | 023-24026-005 |
| Деталь: | *Master Loading Sensor |
| Парткод: | 444-43007-200 |
| Деталь: | *Bracket M.-RMV. Sensor |
| Парткод: | 023-24056-001 |
| Деталь: | *Sensor OS665633-703 |
| Парткод: | 444-41002-200 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Lock Ring 4 |
| Парткод: | 023-17197-007 |
| Деталь: | *Wire Harness M-Rmv |
| Парткод: | 023-24100-108 |
| Деталь: | Reuse Band RSG-130 |
| Парткод: | 665-01212-009 |
| Деталь: | Motor Chassis Elevator Motor |
| Парткод: | 023-12234-109 |
| Деталь: | ELEVATOR MOTOR COLLAR |
| Парткод: | 023-12244-104 |
| Деталь: | GEAR M1X24 |
| Парткод: | 612-10009-107 |
| Деталь: | GEAR M0.8X29+M1X14 |
| Парткод: | 612-80013-004 |
| Деталь: | GEAR M0.8X30+M0.8X14 |
| Парткод: | 612-80012-008 |
| Деталь: | GEAR M0.8X23+M0.8X14 |
| Парткод: | 612-80011-001 |
| Деталь: | GEAR COVER ELEVATOR MOTOR |
| Парткод: | 023-12223-000 |
| Деталь: | COVER ELEVATOR MOTOR |
| Парткод: | 023-12247-006 |
| Деталь: | Motor Assy 445 |
| Парткод: | 023-74001-054 |
| Деталь: | Worm Gear M0.8X1 |
| Парткод: | 612-51001-005 |
| Деталь: | SUPPORT CLAMP WORM |
| Парткод: | 030-19205-001 |
| Деталь: | Bracket Elevator Motor |
| Парткод: | 045-14005-007 |
| Деталь: | METAL 8 |
| Парткод: | 607-60002-006 |
| Деталь: | Gear Elevator 1 |
| Парткод: | 030-21209-006 |
| Деталь: | Gear Elevator 2 |
| Парткод: | 030-21210-004 |
| Деталь: | Cover Elevator Motor Bracket |
| Парткод: | 033-12245-000 |
| Деталь: | SPRING GEAR |
| Парткод: | 030-21248-001 |
| Деталь: | Shaft Elevator 2 |
| Парткод: | 030-21028-109 |
| Деталь: | Joint Elevator |
| Парткод: | 030-21017-000 |
| Деталь: | Shaft Elevator |
| Парткод: | 045-14001-001 |
| Деталь: | Rubber Foot TK-26 |
| Парткод: | 660-01012-003 |
| Деталь: | Knob Angle |
| Парткод: | 033-12051-000 |
| Деталь: | KNOB PRESSURE |
| Парткод: | 033-12050-004 |
| Деталь: | Sheet Separation Adj. |
| Парткод: | 033-12014-008 |
| Деталь: | Cover Stripper 2 |
| Парткод: | 033-12207-108 |
| Деталь: | Shaft Adjuster |
| Парткод: | 033-12153-008 |
| Деталь: | Cover Stripper 1 |
| Парткод: | 033-12208-104 |
| Деталь: | Bearing A-19-B2 |
| Парткод: | 609-00001-005 |
| Деталь: | Spring Tray Lock |
| Парткод: | 030-21240-000 |
| Деталь: | Bracket Tray Lock |
| Парткод: | 030-21238-103 |
| Деталь: | Bracket Interlock |
| Парткод: | 030-21430-004 |
| Деталь: | Tray Safety SW |
| Парткод: | 045-53027-000 |
| Деталь: | Bracket PCB |
| Парткод: | 045-50100-008 |
| Деталь: | FRONT-CNTL-PCB |
| Парткод: | 045-50006-109 |
| Деталь: | Mount Plate |
| Парткод: | 045-50101-004 |
| Деталь: | Wire Harness Tray |
| Парткод: | 045-53022-008 |
| Деталь: | Stepped Screw 4.5 |
| Парткод: | 030-21461-007 |
| Деталь: | Wire Harness H MTPF Power |
| Парткод: | 045-53019-007 |
| Деталь: | Wire Harness MTPF Upper |
| Парткод: | 045-53017-004 |
| Деталь: | Wire Harness K MTPF |
| Парткод: | 045-53016-008 |
| Деталь: | Wire Harness K MTPF Power |
| Парткод: | 045-53018-000 |
| Деталь: | Wire Harness MTPF Motor |
| Парткод: | 045-53020-005 |
| Деталь: | S.-Reduction Sponge MTPF F. Upp |
| Парткод: | 045-34118-002 |
| Деталь: | S.-Reduction Sponge MTPF Bottom |
| Парткод: | 045-34117-006 |
| Деталь: | SB-6025 |
| Парткод: | 665-04055-001 |
| Деталь: | Wire Saddle LWS-1316 |
| Парткод: | 665-02043-006 |
| Деталь: | Suction Unit (1-46) |
| Парткод: | 045-75299-054 |
| Деталь: | *P.-E. Pulley Suction |
| Парткод: | 020-13116-205 |
| Деталь: | *Shaft Belt Driven Pulley |
| Парткод: | 023-21361-105 |
| Деталь: | *Flat Belt 15X0.65X502 |
| Парткод: | 629-00005-003 |
| Деталь: | *M Wing Front |
| Парткод: | 023-21322-100 |
| Деталь: | *S Wing Front |
| Парткод: | 023-21324-102 |
| Деталь: | *Wing Shaft |
| Парткод: | 024-21338-100 |
| Деталь: | *Spring Wing Front |
| Парткод: | 023-21328-000 |
| Деталь: | *Spring Wing Rear |
| Парткод: | 023-21332-008 |
| Деталь: | *M Wing Rear |
| Парткод: | 023-21321-103 |
| Деталь: | *S Wing Rear |
| Парткод: | 023-21323-106 |
| Деталь: | *Belt Roller Plate |
| Парткод: | 024-21309-100 |
| Деталь: | *Belt Roller |
| Парткод: | 024-21341-004 |
| Деталь: | *link Plate S Wing |
| Парткод: | 023-21329-104 |
| Деталь: | *link Plate M Wing |
| Парткод: | 023-21331-001 |
| Деталь: | *Bearing Flaw678 ZZA |
| Парткод: | 600-50057-006 |
| Деталь: | *Drive Shaft Suction |
| Парткод: | 024-21306-101 |
| Деталь: | *Roller (Inner) Transfer Belt |
| Парткод: | 030-15249-004 |
| Деталь: | *Pulley P18S2M6 |
| Парткод: | 611-90016-004 |
| Деталь: | *Belt 40-S2M-172 |
| Парткод: | 621-00005-005 |
| Деталь: | *Bracket Suction Motor |
| Парткод: | 045-21315-003 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Suiction Motor Assy |
| Парткод: | 024-74008-056 |
| Деталь: | *Pulley Gear 0.8X45+28S2M |
| Парткод: | 613-10005-001 |
| Деталь: | *Wire Harness Suction Unit |
| Парткод: | 045-21701-000 |
| Деталь: | *Wire Harness Pre.-Suction Unit |
| Парткод: | 045-21704-000 |
| Деталь: | *Fan E1033H24BYAZ-33 |
| Парткод: | 490-41014-007 |
| Деталь: | *Base Wing Drive |
| Парткод: | 024-21325-106 |
| Деталь: | *Worm gear M1x12x1 |
| Парткод: | 612-50005-007 |
| Деталь: | *Wing Shaft Suction |
| Парткод: | 023-21411-102 |
| Деталь: | *Metal F6X10/9X6:12 X 1.5 |
| Парткод: | 607-13000-402 |
| Деталь: | *Gear M0.5x21x6 |
| Парткод: | 612-10035-000 |
| Деталь: | *Motor PM42L-048-ZVS6 |
| Парткод: | 490-33015-100 |
| Деталь: | *W cam shaft Wing |
| Парткод: | 023-21410-106 |
| Деталь: | *MW cam Wing |
| Парткод: | 023-21408-004 |
| Деталь: | *Helical gear M1x16x6 |
| Парткод: | 612-30001-005 |
| Деталь: | *SW cam Wing |
| Парткод: | 023-21409-108 |
| Деталь: | *Bracket P-Ejection Sensor |
| Парткод: | 045-21311-105 |
| Деталь: | *Wire Harness P-Ejection Sensor |
| Парткод: | 045-21703-003 |
| Деталь: | *PS119ED1 |
| Парткод: | 444-33010-008 |
| Деталь: | *Suction Base |
| Парткод: | 045-21301-002 |
| Деталь: | *Feed Plate F |
| Парткод: | 024-21333-001 |
| Деталь: | *Suction Plate |
| Парткод: | 045-21302-009 |
| Деталь: | *Feed Plate R |
| Парткод: | 024-21334-008 |
| Деталь: | *Pre-Suction Plate |
| Парткод: | 045-21305-008 |
| Деталь: | *Duct Suction Base |
| Парткод: | 045-21306-101 |
| Деталь: | *Fan Base Plate |
| Парткод: | 045-21308-007 |
| Деталь: | De-electricity Brush 180 |
| Парткод: | 045-21316-000 |
| Деталь: | Cover plate suction cover |
| Парткод: | 023-21384-008 |
| Деталь: | Seal Folding Tray Inst. P.-Rcv.-T. |
| Парткод: | 023-21801-008 |
| Деталь: | Cover Plate Suction |
| Парткод: | 023-21381-203 |
| Деталь: | Bracket P-EJ Cover F |
| Парткод: | 045-21313-000 |
| Деталь: | Bracket P-EJ Cover R |
| Парткод: | 045-21312-004 |
| Деталь: | Fixing Pin |
| Парткод: | 020-13114-202 |
| Деталь: | Wire Harness Rear Lower |
| Парткод: | 045-53005-006 |
| Деталь: | *Side Frame F M.-Rmv. |
| Парткод: | 023-24002-203 |
| Деталь: | *Side Frame R M.-Rmv. |
| Парткод: | 023-24009-208 |
| Деталь: | *Stay A M.-Rmv. |
| Парткод: | 023-24016-107 |
| Деталь: | *Stay B M.-Rmv. |
| Парткод: | 023-24017-200 |
| Деталь: | *Bracket Master removal unit |
| Парткод: | 023-24043-007 |
| Деталь: | *M Compression Plate |
| Парткод: | 023-24099-304 |
| Деталь: | *Metal F10X15/14X6 18X2 |
| Парткод: | 607-16001-000 |
| Деталь: | *GEAR M1X71X14 |
| Парткод: | 612-12701-008 |
| Деталь: | *Bracket A Compression Gear |
| Парткод: | 030-19242-101 |
| Деталь: | *Bracket B Compression Gear |
| Парткод: | 030-19243-108 |
| Деталь: | *Master Removal Roller |
| Парткод: | 023-24030-100 |
| Деталь: | *Hook Shaft M Removal Roller Lower |
| Парткод: | 023-24124-104 |
| Деталь: | *Holding Plate Front M.-Rmv. |
| Парткод: | 023-24125-208 |
| Деталь: | *Holding Plate Rear M.-Rmv. |
| Парткод: | 023-24127-200 |
| Деталь: | *Stepped Screw F5X10.8 M3X3 |
| Парткод: | 635-10006-102 |
| Деталь: | *Roller Hook M.-Rmv. |
| Парткод: | 023-24126-000 |
| Деталь: | *Metal F8X12/11X10: 15X2 |
| Парткод: | 607-15000-400 |
| Деталь: | *Gear M1.25X12X7 |
| Парткод: | 612-10004-008 |
| Деталь: | *Link Plate M.-Rmv. |
| Парткод: | 023-24121-105 |
| Деталь: | *Guide Plate Disposal Box |
| Парткод: | 023-24119-003 |
| Деталь: | *Manual Compression Lever |
| Парткод: | 023-24120-001 |
| Деталь: | *Metal F8X13/12X5 16X2 |
| Парткод: | 607-15000-000 |
| Деталь: | *Release Lever M.-Rmv. |
| Парткод: | 023-24113-102 |
| Деталь: | *Knob Release Lever M.-Rmv. |
| Парткод: | 023-24117-000 |
| Деталь: | *Stopper Boss |
| Парткод: | 023-24136-102 |
| Деталь: | *Spring M.-Rmv Release Lever |
| Парткод: | 023-24118-007 |
| Деталь: | *Suction Motor Ccwrs-55PH |
| Парткод: | 023-74002-050 |
| Деталь: | *Pulley Gear 0.8X31+53S2M |
| Парткод: | 613-11300-007 |
| Деталь: | *Belt 40-S2M-290 |
| Парткод: | 621-00001-000 |
| Деталь: | *Gear M0.8X60+M0.8X16 |
| Парткод: | 612-10006-000 |
| Деталь: | *Gear M0.8X54 |
| Парткод: | 612-10005-004 |
| Деталь: | *Bracket Gear M.-RMV. |
| Парткод: | 023-24133-103 |
| Деталь: | *Gear M0.8X25 |
| Парткод: | 612-10018-009 |
| Деталь: | *Metal F6X10/9X6:12 X 1.5 |
| Парткод: | 607-13000-402 |
| Деталь: | *Shaft H Gear |
| Парткод: | 023-24084-102 |
| Деталь: | *Gear M1.25X16X4.5 |
| Парткод: | 612-10019-005 |
| Деталь: | *Gear M1.25X16X8.5 |
| Парткод: | 612-10020-003 |
| Деталь: | *Bracket Compressing Motor |
| Парткод: | 023-24091-109 |
| Деталь: | *Support Clamp Worm |
| Парткод: | 030-19205-001 |
| Деталь: | *Motor Assy (CWRS-445PA) |
| Парткод: | 023-74001-054 |
| Деталь: | *Gear M0.8X35+M0.8X15 |
| Парткод: | 612-81303-006 |
| Деталь: | *Gear Cover Compression Plate |
| Парткод: | 023-24097-107 |
| Деталь: | *Gear M1X17+M0.8X61 |
| Парткод: | 612-81602-003 |
| Деталь: | *Gear M0.8X17+M0.8X49 |
| Парткод: | 612-81401-008 |
| Деталь: | *Gear M0.8X15X7 |
| Парткод: | 612-11103-000 |
| Деталь: | *Bracket FG Sensor Compression Plate |
| Парткод: | 023-24074-000 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Spring Safety SW M-Rmv Unit |
| Парткод: | 023-24134-100 |
| Деталь: | *Set Plate Safety SW M.-Rmv. |
| Парткод: | 023-24135-009 |
| Деталь: | *Stepped Screw F5X1.5 M3X3 |
| Парткод: | 635-18513-100 |
| Деталь: | *Safety SW Assy M.-RMV. |
| Парткод: | 023-53031-000 |
| Деталь: | *Lock Ring 4 |
| Парткод: | 023-17197-007 |
| Деталь: | *Wire Harness M M-Rmv Unit |
| Парткод: | 023-24101-007 |
| Деталь: | *Wire Harness U M-Rmv Unit |
| Парткод: | 023-24102-003 |
| Деталь: | *Box Guide R M.-Rmv. |
| Парткод: | 023-24166-109 |
| Деталь: | Transfer Motor Assy SU |
| Парткод: | 045-75313-057 |
| Деталь: | Transfer Unit Lower MTPF |
| Парткод: | 045-75312-050 |
| Деталь: | *TD3357-240 |
| Парткод: | 490-20007-000 |
| Деталь: | *Bracket Transfer Motor |
| Парткод: | 045-14015-002 |
| Деталь: | *Pulley P28S3M10 |
| Парткод: | 611-90021-008 |
| Деталь: | Belt 80S3M132 |
| Парткод: | 620-00015-003 |
| Деталь: | Side Cover MTPF 1 |
| Парткод: | 033-34014-001 |
| Деталь: | S.-Reduction Sponge MTPF Drive Rear |
| Парткод: | 045-34116-000 |
| Деталь: | Wire Harness K MTPF |
| Парткод: | 045-53016-008 |
| Деталь: | *Cover Paper Feed Upper |
| Парткод: | 045-14053-001 |
| Деталь: | S.-Reduction Sponge MTPF Cover |
| Парткод: | 045-34115-003 |
| Деталь: | *Cover Transfer Unit Upper |
| Парткод: | 045-14010-000 |
| Деталь: | *Cover Guide Lower |
| Парткод: | 033-12061-006 |
| Деталь: | *Hinge |
| Парткод: | 030-21397-007 |
| Деталь: | *Bottom Stay |
| Парткод: | 030-21409-005 |
| Деталь: | *Bracket Assy Guide Lower |
| Парткод: | 033-12059-400 |
| Деталь: | *Arm SW |
| Парткод: | 030-21358-109 |
| Деталь: | *Latch Guide Bracket Assy |
| Парткод: | 030-21360-006 |
| Деталь: | *Spring Latch Front |
| Парткод: | 030-21365-008 |
| Деталь: | *Handle Latch |
| Парткод: | 030-21361-002 |
| Деталь: | *Shaft Latch |
| Парткод: | 030-21031-100 |
| Деталь: | *Roller Tension 1 |
| Парткод: | 030-21362-106 |
| Деталь: | *Plate Tension |
| Парткод: | 030-21363-005 |
| Деталь: | *Spring Tension |
| Парткод: | 030-21364-206 |
| Деталь: | *Metal 6 |
| Парткод: | 607-60003-002 |
| Деталь: | *Clutch HI-MIC5-27 |
| Парткод: | 490-51016-105 |
| Деталь: | *Clutch HI-MIC5-28 |
| Парткод: | 490-51017-101 |
| Деталь: | *Pulley P22+P27-S3M |
| Парткод: | 611-90019-003 |
| Деталь: | *Flange |
| Парткод: | 033-12233-109 |
| Деталь: | *Belt 80S3M312 |
| Парткод: | 620-00011-008 |
| Деталь: | *Belt 80S3M336 |
| Парткод: | 620-00012-004 |
| Деталь: | *Belt 80S3M195 |
| Парткод: | 620-00013-000 |
| Деталь: | *Wire Harness H MTPF |
| Парткод: | 045-14077-008 |
| Деталь: | *Roller Pick-up |
| Парткод: | 030-21016-100 |
| Деталь: | *Lock Ring Roller |
| Парткод: | 030-21203-105 |
| Деталь: | *Bearing TPF-816ZZ-5 |
| Парткод: | 609-00002-001 |
| Деталь: | *Metal 8 |
| Парткод: | 607-60002-006 |
| Деталь: | *Bracket Paper Feed Shaft |
| Парткод: | 030-21329-109 |
| Деталь: | Bracket Pick-up Roller |
| Парткод: | 030-21328-102 |
| Деталь: | *Shaft Paper Feed |
| Парткод: | 033-12188-103 |
| Деталь: | Shaft Pick-Up Roller |
| Парткод: | 030-21026-203 |
| Деталь: | *Pin 2X12 |
| Парткод: | X-520 |
| Деталь: | *Pulley Paper Feed |
| Парткод: | 030-21330-000 |
| Деталь: | *Belt 60S3M150 |
| Парткод: | 620-00004-001 |
| Деталь: | *Base Bracket Separation |
| Парткод: | 033-12137-002 |
| Деталь: | *Cam Stripper |
| Парткод: | 033-12142-006 |
| Деталь: | *Shaft P-Adjust |
| Парткод: | 033-12152-109 |
| Деталь: | *Shaft Stripper Angle |
| Парткод: | 033-12151-005 |
| Деталь: | *Base Plunger |
| Парткод: | 033-12154-004 |
| Деталь: | *Spring Plunger |
| Парткод: | 033-12155-000 |
| Деталь: | *Plunger Pin |
| Парткод: | 033-12156-007 |
| Деталь: | *Spring P-Release |
| Парткод: | 033-12146-001 |
| Деталь: | *Lever P-Release |
| Парткод: | 033-12144-009 |
| Деталь: | *Gear Stripper Angle |
| Парткод: | 033-12148-004 |
| Деталь: | *Bracket Separation 2 |
| Парткод: | 033-12143-002 |
| Деталь: | *Stepped Screw 6X2.2 M4X2.5 |
| Парткод: | 635-17624-006 |
| Деталь: | *Bracket P-Release |
| Парткод: | 033-12145-005 |
| Деталь: | *Stepped Screw 5X2 M3X3 |
| Парткод: | 635-17523-102 |
| Деталь: | *Lever P-Adjust |
| Парткод: | 033-12149-000 |
| Деталь: | *Bracket Separation |
| Парткод: | 033-12141-000 |
| Деталь: | *Spacer1 |
| Парткод: | 033-12068-000 |
| Деталь: | *Spring Separation |
| Парткод: | 030-21343-004 |
| Деталь: | *Shaft Stripper |
| Парткод: | 033-12206-004 |
| Деталь: | *Holder Separation Pad |
| Парткод: | 030-21339-007 |
| Деталь: | *Stripper Pad Foam |
| Парткод: | 030-14376-002 |
| Деталь: | *Stay Transfer Unit Lower |
| Парткод: | 033-12147-008 |
| Деталь: | *Side Frame R |
| Парткод: | 033-12055-103 |
| Деталь: | *Stopper Clutch 2 |
| Парткод: | 033-12231-009 |
| Деталь: | *Cable Clamp UAMS-05-0 |
| Парткод: | 665-02065-000 |
| Деталь: | *Stopper Clutch 1 |
| Парткод: | 033-12230-002 |
| Деталь: | *Spring Roller Tension |
| Парткод: | 033-12008-008 |
| Деталь: | *Bearing DDLF-1910ZZR |
| Парткод: | 601-10195-004 |
| Деталь: | *Edging Saddle EDS-2 |
| Парткод: | 665-02038-002 |
| Деталь: | *Arm Tension R |
| Парткод: | 033-12004-002 |
| Деталь: | *Link Solenoid |
| Парткод: | 033-12006-005 |
| Деталь: | *TDS-12E-5006A |
| Парткод: | 490-50008-109 |
| Деталь: | *Arm Tension F |
| Парткод: | 033-12001-003 |
| Деталь: | *Roller Tension 2 |
| Парткод: | 033-12007-001 |
| Деталь: | *Roller Paper Feed |
| Парткод: | 033-12229-004 |
| Деталь: | *Stay Paper Feed |
| Парткод: | 033-12192-003 |
| Деталь: | Spring Pick-Up Roller |
| Парткод: | 030-21418-004 |
| Деталь: | *Shaft Paper Sensor |
| Парткод: | 030-21347-000 |
| Деталь: | *Spring Paper Sensor |
| Парткод: | 030-21348-006 |
| Деталь: | *Clip JRE3 |
| Парткод: | 634-00002-004 |
| Деталь: | *Bracket Paper Sensor |
| Парткод: | 033-12196-009 |
| Деталь: | *Base Plate Upper Limit Adj. |
| Парткод: | 033-12193-000 |
| Деталь: | *Base Upper Limit Adj. Screw |
| Парткод: | 030-14347-002 |
| Деталь: | *Sensor GP1A73AJ0000F |
| Парткод: | 444-30000-109 |
| Деталь: | *Slide Plate Upper Limit Adj. |
| Парткод: | 033-12194-006 |
| Деталь: | *Spacer 2 |
| Парткод: | 033-12200-006 |
| Деталь: | *Shaft Upper Limit Adj. |
| Парткод: | 033-12195-002 |
| Деталь: | *Knob Upper Limit Adj. |
| Парткод: | 033-12198-001 |
| Деталь: | *Side Frame F |
| Парткод: | 033-12053-208 |
| Деталь: | *Guide Plate Lower 4 |
| Парткод: | 033-12220-104 |
| Деталь: | *Guide Plate Lower 5 |
| Парткод: | 033-12225-106 |
| Деталь: | *Light Absorber Strip |
| Парткод: | 021-15015-101 |
| Деталь: | *Plate Light Absorber Strip |
| Парткод: | 045-14057-007 |
| Деталь: | *Base Sensor 3 |
| Парткод: | 045-14021-002 |
| Деталь: | *Bracket Sensor 3 |
| Парткод: | 045-14020-006 |
| Деталь: | *Plate Passage Sensor 2 |
| Парткод: | 030-21389-004 |
| Деталь: | *Sensor GP2A25J0000F |
| Парткод: | 443-32005-100 |
| Деталь: | Junction Harness Pick-up Sensor |
| Парткод: | 033-12255-005 |
| Деталь: | *Brush Roller Cleaner 2 |
| Парткод: | 030-21349-100 |
| Деталь: | Part Name |
| Парткод: | Part No. |
| Деталь: | Left Cover MTPF |
| Парткод: | 045-34104-001 |
| Деталь: | Rear Cover MTPF |
| Парткод: | 045-34106-004 |
| Деталь: | Right Cover MTPF |
| Парткод: | 045-34105-008 |
| Деталь: | Upper Cover MTPF |
| Парткод: | 045-34107-000 |
| Деталь: | Bracket Upper Cover |
| Парткод: | 045-34108-007 |
| Деталь: | Slide Rail |
| Парткод: | 033-12242-000 |
| Деталь: | Bracket Front Cover |
| Парткод: | 033-34010-006 |
| Деталь: | Front Cover MTPF |
| Парткод: | 045-34103-005 |
| Деталь: | Paper Size Seal |
| Парткод: | 045-34111-105 |
| Деталь: | SEAL TRAY |
| Парткод: | 045-34109-003 |
| Деталь: | Master Making Unit A3(Fig 20, Fig 21) |
| Парткод: | 045-75034-058 |
| Деталь: | *Write Pulse Motor Assy SU (1-5) |
| Парткод: | 023-75145-050 |
| Деталь: | **Bracket Write Pulse Motor |
| Парткод: | 023-28195-103 |
| Деталь: | **Motor PM42L-048-ZVS6 |
| Парткод: | 490-33015-100 |
| Деталь: | **Gear Pulley M0.5X130+17-2 |
| Парткод: | 613-10002-002 |
| Деталь: | **Belt 256-2GT-4 |
| Парткод: | 620-80001-008 |
| Деталь: | **Pulley Assy P40-2Gt-5 |
| Парткод: | 611-90010-006 |
| Деталь: | *Bracket PCB M.-Making |
| Парткод: | 023-28016-004 |
| Деталь: | *Bracket Bottom Master Making PCB |
| Парткод: | 023-28401-005 |
| Деталь: | *Master Making PCB 2 |
| Парткод: | 045-28001-004 |
| Деталь: | *Wire Harness M.-M Unit |
| Парткод: | 023-28239-208 |
| Деталь: | Front Cover M.-M. Unit |
| Парткод: | 023-28222-003 |
| Деталь: | Seal Setting Master Pic. |
| Парткод: | 023-28944-009 |
| Деталь: | Seal Master Making Unit Cover |
| Парткод: | 023-28428-000 |
| Деталь: | Slide Rail |
| Парткод: | 023-17063-205 |
| Деталь: | Bracket Front Upper Rail M.-M. |
| Парткод: | 023-28001-007 |
| Деталь: | Pre-Pressure Spring Right Drum |
| Парткод: | 023-17139-104 |
| Деталь: | Bracket Rear Upper Rail M.-M. |
| Парткод: | 023-28002-003 |
| Деталь: | Pre-Pressure Spring Left Drum |
| Парткод: | 023-17140-102 |
| Деталь: | Slide Rail 2 |
| Парткод: | 023-28402-206 |
| Деталь: | Bracket Front Bottom Rail M.-M. |
| Парткод: | 023-28084-000 |
| Деталь: | Bracket Rear Bottom Rail M.-M. |
| Парткод: | 023-28012-009 |
| Деталь: | Shaft Holder Left |
| Парткод: | 030-16109-001 |
| Деталь: | Shaft Holder Right |
| Парткод: | 030-16108-005 |
| Деталь: | Positioning Pin Rear M.-M |
| Парткод: | 023-28086-002 |
| Деталь: | Stepped Screw F5X5 M3X3 |
| Парткод: | 635-10004-100 |
| Деталь: | Bracket Drawer Connector M.-M. |
| Парткод: | 023-28085-006 |
| Деталь: | Wire Harness TPH Drawer Connector H |
| Парткод: | 045-53002-104 |
| Деталь: | Guide Lower Flexible Wire M.-M |
| Парткод: | 023-28199-001 |
| Деталь: | Guide Upper Flexible Wire M.-M |
| Парткод: | 023-28117-005 |
| Деталь: | Guide Bracket Wire Harness M.-M. |
| Парткод: | 023-28010-006 |
| Деталь: | Holding Plate Wire Harness M.-M. |
| Парткод: | 023-28353-000 |
| Деталь: | Flexible Wire M.-M |
| Парткод: | 023-28238-104 |
| Деталь: | Guide Roller Wire Harness M.-M. |
| Парткод: | 023-28200-000 |
| Деталь: | Bracket Slide Lock M.-M. |
| Парткод: | 023-28003-107 |
| Деталь: | Shaft Stopper M.-M. |
| Парткод: | 023-28122-203 |
| Деталь: | Hook Stopper Handle M.-M. |
| Парткод: | 023-28121-002 |
| Деталь: | Spring Stopper M.-M |
| Парткод: | 023-28339-008 |
| Деталь: | Solenoid TDS-10A-1056 |
| Парткод: | 490-50006-106 |
| Деталь: | Push Button SW Assy |
| Парткод: | 021-51029-208 |
| Деталь: | Cover M.-M. Unit Safety SW |
| Парткод: | 023-28119-008 |
| Деталь: | Bracket M.-M. Unit Safety SW |
| Парткод: | 023-28202-207 |
| Деталь: | *Spring Safety SW /Drum&Mm |
| Парткод: | 023-28403-008 |
| Деталь: | *Bracket M.-M. Unit set SW |
| Парткод: | 023-28404-004 |
| Деталь: | Safety SW Assy M-M,M-Rmv. Unit |
| Парткод: | 023-53025-000 |
| Деталь: | Sensor GP1A75ER |
| Парткод: | 444-30002-101 |
| Деталь: | Wire Harness Front Lower |
| Парткод: | 045-53004-000 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | Squeegee Unit Assy A3 (17-31) |
| Парткод: | 024-75073-056 |
| Деталь: | Flange Support Roller Drum |
| Парткод: | 023-17116-007 |
| Деталь: | LOCK RING 4 |
| Парткод: | 023-17197-007 |
| Деталь: | S-GAP CAM |
| Парткод: | 024-17027-001 |
| Деталь: | Spring Doctor Roller |
| Парткод: | 023-17333-008 |
| Деталь: | Stepped Screw F6X3 M4X4 |
| Парткод: | 635-17634-001 |
| Деталь: | Center Shaft |
| Парткод: | 024-17111-100 |
| Деталь: | Gear M1X45X6 |
| Парткод: | 612-10026-001 |
| Деталь: | Plate Center Shaft |
| Парткод: | 024-17511-000 |
| Деталь: | Base Ink Blocking Plate (Front) |
| Парткод: | 023-17229-006 |
| Деталь: | Ink Blocking Plate Front |
| Парткод: | 023-17227-003 |
| Деталь: | Shaft Screw Ink Blocking Plate |
| Парткод: | 015-36317-305 |
| Деталь: | Stepped Screw F4X3 M3X6 |
| Парткод: | 635-17433-103 |
| Деталь: | Spring Ink Blocking Plate |
| Парткод: | 015-36318-000 |
| Деталь: | Base Ink Blocking Plate (Rear) |
| Парткод: | 023-17228-000 |
| Деталь: | Ink Blocking Plate Rear |
| Парткод: | 023-17226-007 |
| Деталь: | *Squeegee Roller A3 |
| Парткод: | 024-17030-100 |
| Деталь: | *Doctor Roller A3 |
| Парткод: | 024-17329-008 |
| Деталь: | *Ink Drive Shaft A3 |
| Парткод: | 024-17035-004 |
| Деталь: | *Block F Squeegee |
| Парткод: | 023-17041-104 |
| Деталь: | *Metal S4X7X2 |
| Парткод: | 607-03001-001 |
| Деталь: | *O Ring P4-1.9 |
| Парткод: | 640-60040-000 |
| Деталь: | *Side Frame Squeegee F Assy |
| Парткод: | 024-17126-107 |
| Деталь: | *Adj. Plate L Squeegee Gap |
| Парткод: | 023-17336-201 |
| Деталь: | *Gear M0.8X19X4 |
| Парткод: | 612-10027-008 |
| Деталь: | *Sheet Squeegee Roller |
| Парткод: | 639-00002-000 |
| Деталь: | *Gear M0.8X43X3 |
| Парткод: | 612-10028-101 |
| Деталь: | *Side Frame Squeegee R Assy |
| Парткод: | 024-17125-100 |
| Деталь: | *Block R Squeegee |
| Парткод: | 023-17040-108 |
| Деталь: | *Adj. Plate R Squeegee Gap |
| Парткод: | 023-17334-209 |
| Деталь: | *Gear M1X25X8.5 OWC |
| Парткод: | 612-10024-106 |
| Деталь: | Fixing Plate Drive Shaft A3 |
| Парткод: | 023-17294-002 |
| Деталь: | Wire Saddle LWS-0711 |
| Парткод: | 665-02044-002 |
| Деталь: | Scanner Unit 600M II (Fig 18, Fig 19) |
| Парткод: | 045-97000-001 |
| Деталь: | Scanner Unit 600HB (Fig 18, Fig 19) |
| Парткод: | 045-97001-008 |
| Деталь: | *Blind Cover Guide |
| Парткод: | 021-17568-108 |
| Деталь: | *Sponge Blind Cover Guide |
| Парткод: | 021-75014-007 |
| Деталь: | *Screw Scr-M3-1.6 |
| Парткод: | 021-17525-000 |
| Деталь: | *Adj. Plate PLT-ADJ-GLASS |
| Парткод: | 021-17545-205 |
| Деталь: | *Sensor LG-248Nl1 |
| Парткод: | 444-30008-100 |
| Деталь: | *Spring Actuator |
| Парткод: | 021-17129-104 |
| Деталь: | *Actuator 2 Scanner |
| Парткод: | 023-30073-007 |
| Деталь: | *Bracket Stage cover closing sensor |
| Парткод: | 023-30071-004 |
| Деталь: | Bracket FB Scanner |
| Парткод: | 023-30003-009 |
| Деталь: | Hinge Bracket Flat Bed |
| Парткод: | 024-30002-107 |
| Деталь: | *Frame Frm-Upper Scanner |
| Парткод: | 021-17538-306 |
| Деталь: | *Sponge Spng-Pg-1 |
| Парткод: | 021-17515-004 |
| Деталь: | *Sponge Spng-Pg-2 |
| Парткод: | 021-17516-000 |
| Деталь: | *Tape-Frm-U Scanner |
| Парткод: | 021-17585-002 |
| Деталь: | *Mylar Mlr-Frame-U Scanner |
| Парткод: | 021-17514-008 |
| Деталь: | *Sponge Spr-Glass-R |
| Парткод: | 021-17531-107 |
| Деталь: | *Sponge Spr-Glass-F |
| Парткод: | 021-17530-100 |
| Деталь: | *Stage Glass Gls-Platen |
| Парткод: | 021-17510-207 |
| Деталь: | *Shading Plate E-20 |
| Парткод: | 021-17512-005 |
| Деталь: | *Cover CVR-LENS-UNIT |
| Парткод: | 021-17553-003 |
| Деталь: | *ASM-APS-Sensor-M |
| Парткод: | 024-30008-008 |
| Деталь: | *Sensor Ey3A-1061 |
| Парткод: | 021-53142-001 |
| Деталь: | *Harness ASM-Size Sensor-M |
| Парткод: | 024-30009-101 |
| Деталь: | *Harness ASM-SISESENS-MI |
| Парткод: | 024-30010-207 |
| Деталь: | *CCD Unit PBA 600M |
| Парткод: | 045-50008-004 |
| Деталь: | *Band Lens Assy |
| Парткод: | 021-17592-106 |
| Деталь: | *Lens Assy |
| Парткод: | 045-30100-001 |
| Деталь: | *Cover Lens Assy |
| Парткод: | 021-17593-102 |
| Деталь: | *Flat Cable ASM-Main I/F 600 |
| Парткод: | 024-30007-001 |
| Деталь: | *Plate-APS-Sensor |
| Парткод: | 021-17543-105 |
| Деталь: | *Harness Empty Sensor |
| Парткод: | 021-51122-100 |
| Деталь: | *Plate Plt-Ccd-Cable Scanner |
| Парткод: | 021-17544-101 |
| Деталь: | *Guide Bracket Guide-Ffc-Frame |
| Парткод: | 021-17569-007 |
| Деталь: | *Sponge Spng-Ccd-Cable |
| Парткод: | 021-17517-007 |
| Деталь: | *Guide Plate Plt-Ccd-Cable2 |
| Парткод: | 021-17547-100 |
| Деталь: | Bracket Flat Cable Guide |
| Парткод: | 045-30008-008 |
| Деталь: | FFC Clamp FC-45 |
| Парткод: | 665-00310-007 |
| Деталь: | *Bracket HP-SENS Scanner |
| Парткод: | 021-17567-004 |
| Деталь: | *Wire Harness ASM-H.Psens |
| Парткод: | 021-51121-007 |
| Деталь: | *PCB Pba-Chukei |
| Парткод: | 021-50535-100 |
| Деталь: | *Plate Plt-Hinge Scanner |
| Парткод: | 021-17546-104 |
| Деталь: | Wire Harness FB Upper |
| Парткод: | 045-53001-000 |
| Деталь: | Clamp Plate Base Assy (20-29) |
| Парткод: | 024-75100-053 |
| Деталь: | Drum Body A3 |
| Парткод: | 024-75061-058 |
| Деталь: | Drum Body LD |
| Парткод: | 024-75063-050 |
| Деталь: | Screen Assy (S) |
| Парткод: | 024-17115-008 |
| Деталь: | Light Absorber Strip(328X18) |
| Парткод: | 023-17004-306 |
| Деталь: | Hanger Plate Screen |
| Парткод: | 024-17003-005 |
| Деталь: | Block Sheet Assy A3W |
| Парткод: | 024-17011-008 |
| Деталь: | Seal Tape A3W |
| Парткод: | 024-17256-000 |
| Деталь: | DRUM SEAL |
| Парткод: | 023-17007-003 |
| Деталь: | Flange Front |
| Парткод: | 023-17012-104 |
| Деталь: | Weight Balance F A |
| Парткод: | 023-17014-000 |
| Деталь: | Weight Balance F B |
| Парткод: | 023-17262-003 |
| Деталь: | Flange Handle |
| Парткод: | 024-17149-000 |
| Деталь: | B Position Marking Sticker |
| Парткод: | 023-17307-007 |
| Деталь: | Flange Gear |
| Парткод: | 024-17009-003 |
| Деталь: | Drum Flange Rear |
| Парткод: | 023-17006-201 |
| Деталь: | Weight Balance R A |
| Парткод: | 023-17011-000 |
| Деталь: | Weight Balance R B |
| Парткод: | 023-17261-007 |
| Деталь: | Metal Stopper Drum |
| Парткод: | 023-17263-000 |
| Деталь: | Drum Joint |
| Парткод: | 024-17008-104 |
| Деталь: | Boss A-Positioning ADJ |
| Парткод: | 024-17010-109 |
| Деталь: | *Clamp Plate Base |
| Парткод: | 024-17067-100 |
| Деталь: | *Clamp Magnet |
| Парткод: | 024-17181-000 |
| Деталь: | *Friction Sheet |
| Парткод: | 024-17180-004 |
| Деталь: | *Spring Clamp Plate Base |
| Парткод: | 023-17251-001 |
| Деталь: | *Clamp Plate |
| Парткод: | 024-17068-107 |
| Деталь: | *Release Lever Clamp Plate |
| Парткод: | 023-17191-106 |
| Деталь: | *Collar D12 Clamp |
| Парткод: | 023-17069-009 |
| Деталь: | *Spring Clamp Plate Close |
| Парткод: | 023-17275-008 |
| Деталь: | *Projection Plate |
| Парткод: | 024-17071-108 |
| Деталь: | *Shaft Projection Support |
| Парткод: | 024-17428-006 |
| Деталь: | Light Absorber Strip(65X18) |
| Парткод: | 023-17344-204 |
| Деталь: | Disposal Box Unit (1-7) |
| Парткод: | 023-75097-357 |
| Деталь: | *Cover Disposal Box |
| Парткод: | 023-24036-108 |
| Деталь: | *Disposal Box |
| Парткод: | 023-24035-403 |
| Деталь: | *Box Lever Disposal box |
| Парткод: | 023-24140-304 |
| Деталь: | *Lock Lever Disposal Box |
| Парткод: | 045-24001-000 |
| Деталь: | *Handle Spring Disposal Box |
| Парткод: | 023-24148-003 |
| Деталь: | *Spring Box Cover Disposal Box |
| Парткод: | 030-19408-107 |
| Деталь: | *Seal Disposal Instruction Pic |
| Парткод: | 023-24143-109 |
| Деталь: | Bracket M.-Rmv. |
| Парткод: | 023-24132-000 |
| Деталь: | Cover M.-Rmv. |
| Парткод: | 023-24103-000 |
Коды ошибок
A01
A02
A04
A05
A06
A07
A08
A09
A10
A16
A17
A34
B01
B02
B03
B04
B05
B07
B08
B09
B11
B13
B15
B17
B19
B21
B22
B23
B24
B25
B26
B27
B28
B31
B32
B33
B34
B35
C01
C02
C03
C04
C06
C07
C08
C09
C10
D01
D02
D03
D04
D05
D07
D08
D09
D11
D13
D17
D18
D19
D22
D32
E01
E02
F01
F02
F03
F05
F08
F10
F12
F15
F17
F18
F21
F22
F24
F30
F31
F32
F37
F40
F41
F42
F43
F44
F45
F47
F48
F49
F52
F58
F60
F61
F62
F63
F64
F65
F66
F67
F73
F74
F78
F79
F85
F86
F87
F88
F89
F90
F91
F92
F93
F94
F95
H1
H2
H3
H4
H5
H6
T01
T02
T03
T04
T05
T06
T08
T09
T10
T11
T12
T13
T14
T15
T17
T18
T19
T20
T24
T25
T89
T91
T92
T93
T94
T95
T96
T97
T98
T99
Описание
| Error code: | A01 |
| Display: | A01-xxx Master Mis-Feed Pull Out Master Making Unit and Rewind Master Roll, then Reset Master in Place. |
| Description: | Master feed error |
| Causes: | 201 Master-positioning sensor does not go ON even after the write pulse motor is activated during the master-positioning, master-cut, or master-loading operation. 202 Master-positioning sensor does not go OFF even when the write pulse motor is reversed during the master-positioning or at start of master-making operation. 211 Master-positioning sensor is ON during standby. 214 Master-positioning sensor is ON at the start of master making. 215 Faulty gate-array control for the write pulse motor (motor does not stop within set time). |
| Remedy: | Open the master-making unit and rewind the master material on the master roll, and then reset the master, or turn OFF the power and power back ON. |
| Error code: | A02 |
| Display: | A02-xxx Master Loading Error Pull Out Print Cylinder and Discard Master. |
| Description: | Master loading error |
| Causes: | 509 Master-loading sensor was OFF when the master was checked at a specified drum angle during the master-loading operation. |
| Remedy: | Pull out the print cylinder and set it back. |
| Error code: | A04 |
| Display: | A04-xxx Master Disposal Error Pull Out Print Cylinder and Discard Master. |
| Description: | Master disposal error |
| Causes: | 303 Check Print Drum - Master disposal error / Master disposal jam. |
| Remedy: | Pull out the print drum and push it back in. |
| Error code: | A05 |
| Display: | A05-xxx Master Jammed in Disposal Unit Pull Out Master Disposal Box and Remove Jammed Master |
| Description: | Master present in the master disposal area |
| Causes: | 304 Master disposal jam sensor was ON at the completion of the master disposal. 312 Master disposal jam sensor was ON at the start of the master making. 315 Master disposal jam sensor was ON after the completion of the recovery movement. |
| Remedy: | Pull out master disposal box and place it back after removing the jammed master in the master disposal area, or turn OFF the power and power back ON. |
| Error code: | A06 |
| Description: | Check paper feed tray |
| Causes: | 403 Either the upper or lower safety switch of the paper-feed-tray is OFF. Note: This detection is not made when the machine is in low-power-mode (24V OFF). |
| Remedy: | Change the condition of the paper-feed-tray upper/lower safety switches to ON condition, or turn OFF the power and power back ON. |
| Error code: | A07 |
| Display: | A07 [Paper feed error] |
| Description: | Paper feed error |
| Causes: | 409 Paper-ejection sensor was OFF when the paper should have arrived, and the paper sensor was ON when the machine stopped (Paper misfeed). 412 Paper sensor was OFF three times in succession when a paper misfeed was detected (paper misfeed). 413 Paper sensor was still ON (detecting paper) when the paper should have went out from the sensor. 418 The paper sensor was ON at the start of machine operation when the START button was pressed. 429 Paper feed error (recovery error). 432 Paper sensor was ON when the machine went into paper feed retry movement after a paper misfeed. |
| Error code: | A08 |
| Display: | A08 [Paper jam on print drum] |
| Description: | Paper jam on print drum |
| Causes: | 410 Paper-ejection sensor was OFF when paper should have arrived, and the paper sensor was OFF when the machine stopped (paper jam on the print drum). 430 Paper jam on print drum (recovery error). |
| Error code: | A09 |
| Display: | A09 [Paper ejection error] |
| Description: | Paper ejection error |
| Causes: | 411 Paper-ejection sensor was ON when the paper should have left the paper-ejection sensor. 417 Paper-ejection sensor was ON at the start of machine operation when the START button was pressed. 431 Paper-ejection error (recovery error). |
| Error code: | A10 |
| Display: | A10-Paper Output Jam |
| Description: | Paper did not exit the printer or fuser properly, causing a paper jam. Open Cover A and refer to the labels on the printer to clear the jam. |
| Causes: | 102 The original is pulled out from the AF unit before the scanning is completed. 103 Original jammed under AF registration sensor. 103 Original jam at AF registration sensor. Simplex AF: Registration-sensor does not go OFF after Original-IN-sensor goes ON. Duplex AF: Registration-sensor does not go OFF after the original feeds. 105 Original jammed at AF Read sensor. 106 Original jammed at original ejection sensor. 106 Original jam at AF original out sensor. Simplex AF: Original-OUT-sensor does not go OFF after Original-IN-sensor goes OFF. Duplex AF: Original-OUT-sensor does not go OFF after Registration-sensor goes OFF. 107 Original does not arrive to the AF Registration sensor. 108 Original does not arrive to the AF Read sensor. 109 Original does not arrive to the original ejection sensor. 109 Original Jam before AF original out sensor. Simplex AF: Original-OUT-sensor does not go ON after Original-IN-sensor goes ON. Duplex AF: Original-OUT-sensor does not go ON after the original feeds. 169 AF feed cover is opened due to original jam, while originals are present on the tray. 178 Original Jam before Original reverse sensor. Duplex AF: Original reverse sensor does not go ON after the original feeds. 179 Original Jam at Original reverse sensor. Duplex AF: Original reverse sensor does not go OFF after the original feeds. 180 Duplex AF: Original multiple feed |
| Remedy: | 1. Ensure the correct weight and type of paper is loaded in the currently used tray. Also ensure the paper is loaded correctly in the tray. 2. Clean the exit rollers. 3. Ensure the exit rolls rotate freely when the exit roller gear train is rotated. 4. At the rear of the printer, inspect the gate which directs the print to the face-up output bin or the face-down output bin. 5. Test the fuser motor (which drives the exit gear train) using the test described in “Motor and clutch tests”. Replace the engine controller board. |
| Error code: | A16 |
| Display: | A16-xxx Master Remains on Print Cylinder (Drum) Pull Out Print Cylinder and Remove Master |
| Description: | Waiting for the master to be removed from the drum |
| Causes: | 525 Waiting for the master to be removed from the print cylinder (drum). |
| Remedy: | Pull out the print cylinder (drum), remove the master around it and insert it back. |
| Error code: | A17 |
| Display: | A17-xxx System Error in Master Making Unit Take Out Master and then Close Master Making Unit Cover |
| Description: | Cutter error |
| Causes: | 209 Cutter HP switch is OFF when master-making starts, when the master material is set in the master making unit, or when the machine goes into idle condition. |
| Remedy: | Open the Master making unit, remove the master and close the master making unit. |
| Error code: | A34 |
| Display: | A34-xxx Master Not Set in Place Insert Lead Edge of Master into Master Entrance and Close Master Making Unit |
| Description: | Requesting for the master to be reset |
| Causes: | 218 Reqesting for the master material to be reset into the master making unit. |
| Remedy: | Open the Master making unit, re-insert the master material into the master making unit. |
| Error code: | B01 |
| Description: | Keycard counter: No card |
| Causes: | 730 Keycard counter: No card O O |
| Remedy: | Insert card. |
| Error code: | B02 |
| Description: | Sorter error - Serviceman Call |
| Causes: | 702 Serviceman call error command was received from the sorter. |
| Remedy: | Check the sorter. |
| Error code: | B03 |
| Description: | Sorter error - Jam |
| Causes: | 703 Received paper jam error command was received from the sorter. |
| Remedy: | Remove the jammed paper. |
| Error code: | B04 |
| Description: | Sorter error - Door open |
| Causes: | 707 Cover open error cmmand was received from the sorter. |
| Remedy: | Close the sorter cover. |
| Error code: | B05 |
| Description: | Soter Error - Other errors |
| Causes: | 709 Other error command was received from the sorter. |
| Remedy: | Check the sorter. |
| Error code: | B07 |
| Description: | MTPF - Paper Jam (upper) |
| Causes: | 825 Received paper jam error from the MTPF unit. The FL feed sensor 4 does not go ON after the Transfer motor activated for set pulses from the moment the FL feed sensor 3 turned ON.(FL feed sensors 1 & 2 = OFF, sensor 3=ON). Or the FL feed sensor 3 is ON when the machine power is turned ON. 826 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 4 goes ON, but the Paper sensor does not go ON even after the FL transfer motor activated for the set pulses.(FL feed sensors 1 &2 = OFF, sensors 3 & 4 =ON). Or the FL feed sensors 3 & 4 are ON when the machine power is turned ON. 827 Received paper jam error from the MTPF unit. While the machine is in idle state (waiting for a print job), the FL feed sensors 3 & 4 and Paper sensor are ON. 828 After the paper is fed, the FL feed sensor 4 goes ON, but the Paper sensor does not go ON even after the FL transfer motor activated for the set pulses.(FL feed sensors 1, 2 & 3 = OFF, sensor 4 =ON). Or the FL feed sensor 4 is ON when the machine power is turned ON. 829 Received paper jam error from the MTPF unit. While the machine is in idle state (waiting for a print job), the FL feed sensor 4 and Paper sensor are ON. 849 MTPF other jam errors. 850 MTPF Tray No.1 multiple feed error. 851 MTPF Tray No.2 multiple feed error. 852 MTPF Tray No.1 multi-drag feed error 1 (wrong A/D data) 853 MTPF Tray No.2 multi-drag feed error 1 (wrong A/D data) 856 MTPF Tray No.1 multi-drag feed error 1 (FL feed sensor 4 does not go OFF) 857 MTPF Tray No.2 multi-drag feed error 1 (FL feed sensor 4 does not go OFF) |
| Remedy: | Remove the jammed paper. |
| Error code: | B08 |
| Description: | MTPF - Feed Joint Passage Cover Open Error |
| Causes: | 805 Feed joint passage cover open error singal is received from MTPF unit. |
| Remedy: | Close the feed joint passage cover. |
| Error code: | B09 |
| Description: | MTPF - Paper Jam (lower) |
| Causes: | 816 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 1 goes ON, but the FL feed sensor 2 does not go ON even after the FL transfer motor activated for the set pulses. (FL feed sensors 1 = ON). Or the FL feed sensor 1 is ON w hen the machine power is turned ON. 817 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 2 goes ON, but the FL feed sensor 3 does not go ON even after the FL transfer motor activated for the set pulses. (FL feed sensors 1 & 2 = ON). Or the FL feed sensors 1 & 2 are ON when the machine power is turned ON. 818 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 3 goes ON, but the FL feed sensor 4 does not go ON even after the FL transfer motor activated for the set pulses. (FL feed sensors 1, 2 & 3 = ON). Or the FL feed sensors 1, 2 & 3 are ON when the machine power is turned ON. 819 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 4 goes ON, but the Paper sensor does not go ON even after the FL transfer motor activated for the set pulses. (FL feed sensors 1, 2, 3 & 4 = ON). Or the FL feed sensors 1, 2, 3 & 4 are ON when the machine power is turned ON. 820 Received paper jam error from the MTPF unit. While the machine is in idle state (waiting for a print job), the FL feed sensors 1, 2, 3 & 4 and Paper sensor are ON. 821 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 2 goes ON, but the FL feed sensor 3 does not go ON even after the FL transfer motor activated for the set pulses. (FL feed sensor 1 = OFF, sensor 2 = ON). Or the FL feed sensor 2 is ON w hen the machine power is turned ON. 822 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 3 goes ON, but the FL feed sensor 4 does not go ON even after the FL transfer motor activated for the set pulses. (FL feed sensor 1 = OFF, sensors 2 & 3 = ON). Or the FL feed sensors 2 & 3 are ON when the machine power is turned ON. 823 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 4 goes ON, but the Paper sensor does not go ON even after the FL transfer motor activated for the set pulses. (FL feed sensor 1 = OFF, sensors 2, 3 & 4 = ON). Or the FL feed sensors 2, 3 & 4 are ON when the machine power is turned ON. 824 Received paper jam error from the MTPF unit. While the machine is in idle condition (waiting for a print job), the FL feed sensors 2, 3 & 4 and Paper sensor are ON. 825 Received paper jam error from the MTPF unit. After the paper is fed, the FL feed sensor 3 goes ON, but the FL sensor 4 does not go ON even after the FL transfer motor activated for the set pulses. (FL feed sensors 1 & 2 = OFF, sensor 3 = ON). Or the FL feed sensor 3 is ON w hen the machine power is turned ON. 849 MTPF other jam errors. 854 MPTF Tray No.1 Multi-drag feed error 2 (FL feed sensor 3 does not go OFF) 855 MPTF Tray No.2 Multi-drag feed error 2 (FL feed sensor 3 does not go OFF) |
| Remedy: | Remove the jammed paper. |
| Error code: | B11 |
| Description: | MTPF - Tray No.1 Paper Jam |
| Causes: | 807 Received paper jam error from MTPF unit. Paper misfeed from Tray No.1 (FL feed sensor 3 = OFF) 842 The Paper sensor is still OFF w hen the paper from Tray No.1 should have arrived at the sensor. 858 The mult-tray 1 pickup sensor is ON at the start of a printing job from Tray No.1. * If any of the FL feed sensor is ON at the same time, the error message on those sensors w ill be displayed. |
| Remedy: | Remove the jammed paper and reset Tray No.1 in MTPF Unit. |
| Error code: | B13 |
| Display: | B13-Duplex Inverter Jam |
| Description: | Paper did not exit the duplex module correctly, causing a paper jam. Open Area B and refer to the labels on the printer to clear the jam. |
| Causes: | 809 MTPF Tray No.1 is opened. |
| Remedy: | 1. Ensure the correct weight and type of paper is loaded in the currently used tray. Also ensure the paper is loaded correctly in the tray. 2. Inspect and clean the eject rollers behind the fuser unit. 3. Ensure the paper path leading to the duplex unit and the duplex unit’s paper path are both clear of obstructions. 4. Inspect the operation of the solenoid activated separator gate the direct the print into the duplex unit. Test the exit solenoid with the “Motor and clutch tests”. Replace the duplex unit. 6. Replace the engine controller board. |
| Error code: | B15 |
| Description: | MTPF - FL Transfer Unit Door Open Error |
| Causes: | 800 The MTPF Transfer unit is opened. |
| Remedy: | Close the MTPF Transfer unit. |
| Error code: | B17 |
| Description: | MTPF - Tray No.2 Paper Jam |
| Causes: | 812 Received paper jam error command from MTPF unit. Paper misfeed from Tray No.2 (FL feed sensor 1 = OFF) 843 The Paper sensor is still OFF when the paper from Tray No.2 should have arrived at the sensor. |
| Remedy: | Remove the jammed paper and reset Tray No.2 in MTPF Unit. |
| Error code: | B19 |
| Description: | MTPF - Tray No.2 Open Error |
| Causes: | 814 MTPF Tray No.2 is opened. |
| Remedy: | Set the Tray No.2 back in place. |
| Error code: | B21 |
| Display: | B21-Duplex Area Jam |
| Description: | Paper did not exit the transport area correctly, causing a paper jam. Open Cover B and refer to the labels on the printer to clear the jam. |
| Causes: | 714 File name error on the Hold Memory. 715 Access error on the Hold Memory. 716 Other error on the Hold Memory. |
| Remedy: | 1. Ensure the correct weight and type of paper is loaded in the currently used tray. Also ensure the paper is loaded correctly in the tray. 2. Clean the duplex unit’s rollers. 3. Test the duplex motor and clutch as described in “Motor and clutch tests”. Replace the duplex unit. 5. Replace the engine controller board. |
| Error code: | B22 |
| Display: | B22-xxx !! Job Separator is OFF !! Turn On Power Switch of it |
| Description: | Job separator: Power off |
| Causes: | 721 With the [Tape separation] function set ON, no power is supplied to the job separator when start key is pressed. 727 After cluster-A signal turned ON, BUSY-signal stayed [L] more than 7 seconds (power to job separator was turned OFF while the tape is being ejected. |
| Remedy: | Press Reset Key and check and switch ON the power of Job Separator. |
| Error code: | B23 |
| Display: | B23-xxx No Paper Tape in Job Separator Replace Tape Roll |
| Description: | Job separator: No tape |
| Causes: | 722 With the [Tape separation] function set ON, no tape detected in the job separator when the start key is pressed. 723 No tape remains in job separator upon completion of the tape-ejection operation. |
| Remedy: | Press Reset Key and set paper tape in Job Separator. |
| Error code: | B24 |
| Display: | B24-xxx Paper Tape Jam in Job Separator Remove Paper Tape |
| Description: | Job separator: Tape jam |
| Causes: | 724 Tape jam detected when the start key is pressed with the [Tape separation] function set to ON. 725 The tape-jam detection signal is [H] for more than 1.2 seconds after cluster-A signal turns ON (tape misfeed). 726 Job separator tape-jam detection signal is [L] when the BUSY signal changes from [L] to [H] (or after 7 sec. at [L]) after the cluster-A signal goes ON (tape misfeed). |
| Remedy: | Press Reset Key and remove the jammed tape. |
| Error code: | B25 |
| Description: | Sorter - Tray Full Error |
| Causes: | 704 Sorter tray full. |
| Remedy: | Remove papers from the sorter tray. |
| Error code: | B26 |
| Description: | Sorter - Paper Remaining on the Tray |
| Causes: | 705 Paper remaining on the sorter tray. |
| Remedy: | Remove paper from the sorter tray. |
| Error code: | B27 |
| Description: | Sorter - Stapler Error |
| Causes: | 706 Stapler error command is received from the sorter. |
| Remedy: | Check the stapler and correct the stapler problem. |
| Error code: | B28 |
| Description: | Sorter - paper Size Error |
| Causes: | 708 Paper size error command was received from the Sorter. |
| Remedy: | Remove paper from the sorter tray. |
| Error code: | B31 |
| Display: | B31-xxx !! No Linked Printer Detected !! Check Cable Connection and Power Supply for Linked Printer |
| Description: | Network cable not connected |
| Causes: | 916 Network cable is not connected when the machine is powered ON. |
| Remedy: | Press Reset Key and connect the network cable. |
| Error code: | B32 |
| Display: | B32-xxx !! No Linked Printer Detected !! Check Cable Connection and Power Supply for Linked Printer |
| Description: | NIC - Communication error |
| Causes: | 914 MIB (Management Informtion Base) request error 915 MIB no reply 917 Communication error on the network. 920 Error detected by Network Interface Card (NIC) - NAK (negative acknowledgement was received). |
| Remedy: | Press Reset Key, and check the network cable and linked printer. |
| Error code: | B33 |
| Display: | B33-xxx No IP Address Assigned to This Printer Contact Your Network Administrator |
| Description: | IP address set up error |
| Causes: | 931 DHCP is ON, but DHCP server is not found. |
| Remedy: | Press Reset Key, and enter the IP address. |
| Error code: | B34 |
| Description: | Linked Printer Error (RZ3) [Linked Printer - No Toner Error] (RZ5 & RZ9) |
| Causes: | 919 Error on the linked printer. 919 No toner in the linked printer. |
| Remedy: | Press [Reset] Key and correct the error on the linked printer (RZ3). Press [Reset] Key and replace the toner on the linked printer (RZ5 & RZ9). |
| Error code: | B35 |
| Description: | Linked Printer: Call Service Error |
| Causes: | 970 Error in the linked printer. |
| Remedy: | Press Reset Key, and correct the error on the linked printer. |
| Error code: | C01 |
| Display: | C01-xxx No Ink Replace Ink Cartridge |
| Description: | Main motor is abnormal |
| Remedy: | Is the main motor working? NO 1. Check if the connector CN1 of the main motor is disconnected. 2. Check if the connector J313 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circutied. 4. Check if the conductor patterns on the main motor board and LGC board are short- or open-circuited. 5. Replace the main motor. 6. Replace the LGC board. YES Is the LED on the main motor board lit without flickering? NO 1. Check if the connector pins are disconnected and the harnesses are open-circuited. 2. Check if the conductor patterns on the main motor board and LGC board are short- or open-circuited. 3. Replace the main motor. 4. Replace the LGC board. YES 1. Check if the PLL lock signal J313-11 output from the LGC board is always level “L”? 2. Check if the voltage supplied to the microcomputer input terminal IC10-7 is always “L”? 3. Replace the LGC board. |
| Error code: | C02 |
| Display: | C02-xxx No Master Replace Master Roll |
| Description: | Replace master roll |
| Causes: | 200 The master end was detected twice in succession at 10-milliseconds intervals during master transport. 240 Master remaining amount is zero from the RF-Tag information. 253 Masterless error was detected twice consecutively on one same master-roll. |
| Remedy: | Remove the empty master roll and replace with a new one. |
| Error code: | C03 |
| Display: | C03-xxx Master Disposal Box is Full Empty Master Disposal Box |
| Description: | Master disposal box full |
| Causes: | 308 Compression detection position was reached before the master-compression-motor encoder-sensor count reached the specified level, after the master compression motor turned ON in the compressing direction. |
| Remedy: | Remove master disposal box from the machine, throw away the disposed master from the disposal box and return the disposal box in the machine after an interval of over 5 seconds. |
| Error code: | C04 |
| Display: | C04-xxx Add Paper |
| Description: | Abnormal feed motor |
| Causes: | 402 Paper detection sensor is OFF (not detecting paper). |
| Remedy: | Is the PFP motor working? (Perform the output check in the test mode: 03-125/175) NO 1. Check if the signal line connector of the feed motor is disconnected. 2. Check if the connector J327 on the LGC board is disconnected. 3. Check if the connector pins are disconnected and the harnesses are open-circuited. 4. Check if the conductor patterns on the feed motor board and LGC board are short- or open circuited. 5. Replace the feed motor. 6. Replace the LGC board. YES Is the LED on the feed motor board lit without flashing? NO 1. Check if the connector pins are disconnected and the harnesses are open-circuited. 2. Check if the conductor patterns on the feed motor board and LGC board are short- or open-circuited. 3. Replace the feed motor. 4. Replace the LGC board. YES Replace the LGC board. |
| Error code: | C06 |
| Description: | Feed motor rotation abnormal |
| Causes: | 859 No paper in Tray No.1 |
| Remedy: | Is the paper feed motor rotating properly? N: 1. Check if the connector J41 of the paper feed motor is disconnected. 2. Check if the connector J109 on the LGC board is disconnected. 3. Check if the connector J703 of the switching power supply is disconnected. 4. Check if the harness between the LGC board and the paper feed motor is open-circuited. 5. Check if the harness between the switching power supply and the paper feed motor is open-circuited. 6. Check if any harness is open-circuited or any connector pin is disconnected. 7. Rotate the motor manually, clockwise as seen from its back, and if the motor load is abnormal, remove any foreign matter from the drive unit. 8. Replace the paper feed motor. 9. Replace the LGC board. Y: Are the pins A6 and A10 of the connector J109 on the LGC board always at the level "L"? N: 1. Check if the connector J41 of the paper feed motor is disconnected. 2. Check if the connector J109 on the LGC board is disconnected. 3. Check if any conductor pattern on the LGC board is open- or short-circuited. 4. Check if any harness is open-circuited or any connector pin is disconnected. 5. Replace the LGC board. 6. Replace the paper feed motor. Y: 1. Check if any conductor pattern on the LGC board is open- or short-circuited. 2. Replace the LGC board. 3. Replace the paper feed motor. |
| Error code: | C07 |
| Description: | Exit motor overcurrent detection error |
| Causes: | 860 No paper in Tray No.2 x x |
| Error code: | C08 |
| Description: | ADU motor IC overcurrent detection error |
| Causes: | 861 No paper is set on the standard paper feed tray while the tray is specified as interposer tray by the Admin. Tab on the operation panel. |
| Remedy: | 1 Is the ADU motor working? (Perform the output check in the test mode: 04-110/160) Yes 2 No 1. Check if any of the connectors CN251 and CN252 on the ADU board is disconnected. 2. Check if the relay connector between the ADU board and the PFC board is disconnected. 3. Check if the connector CN246 on the PFC board is disconnected. 4. Check if the connector pins are disconnected and the harnesses are open circuited. 5. Check if the conductor patterns on the ADU board and the PFC board are short circuited or open circuited. 6. Replace the ADU motor. 7. Replace the ADU board. 8. Replace the PFC board. 2 Is the voltage supplied to the driver IC terminal IC1-18 on the ADU board is always at level "H"? Yes 3 No 1. Check if the voltage supplied to the connector CN251-12 on the ADU board is always at level "H". 2. Check if the voltage supplied to the connector CN246-6 on the PFC board is always at level "H". 3. Check if the voltage supplied to the CPU input terminal (IC4-96) on the PFC board is always at level "H". 4. Replace the PFC board. 3 Replace the ADU board. |
| Error code: | C09 |
| Description: | No Interposal Paper in MTPF Tray No.1 |
| Causes: | 862 No paper is set in Tray No.1 while the tray is specified as interposer tray by the Admin. Tab on the operation panel. |
| Remedy: | Press [Reset] Key and load interposal paper in Tray No.1 |
| Error code: | C10 |
| Description: | No Interposal Paper in MTPF Tray No.2 |
| Causes: | 863 No paper is set in Tray No.2 while the tray is specified as interposer tray by the Admin. Tab on the operation panel. |
| Remedy: | Press [Reset] Key and load interposal paper in Tray No.2 |
| Error code: | D01 |
| Display: | D01-xxx Set Print Cylinder (Drum) in Place |
| Description: | Print drum not set |
| Causes: | 526 Print drum is not set in the machine (drum connection signal, drum safety switch, and drum-lock sensor is OFF. 527 Print drum connection signal is OFF when the print drum was inserted in the machine. 528 Print drum safety switch is OFF when the print drum was inserted in the machine. 529 Print drum lock sensor is OFF when the print drum was inserted in the machine (time-out: 5 seconds). 530 Print drum connection signal does not go OFF within 5 seconds after the print drum safety switch went OFF when the print drum was pulled out. |
| Remedy: | Set the print drum in the machine. |
| Error code: | D02 |
| Display: | D02-xxx Wrong-Type Print Cylinder Installed Replace with Correct Type |
| Description: | Incorrect print drum |
| Causes: | 532 Incorrect print drum is used. 580 Incorrect print drum is used. |
| Remedy: | Set correct print drum in the machine. |
| Error code: | D03 |
| Display: | D03-xxx Install Ink Cartridge |
| Description: | Ink cartridge not set |
| Causes: | 533 Bottle set switch is OFF. |
| Remedy: | Install ink cartridge in the print drum. |
| Error code: | D04 |
| Display: | D04-xxx Wrong-type Ink Cartridge Installed or Cannot Read Ink Info Replace Ink Cartridge or Contact dealer/Riso office |
| Description: | Incorrect ink cartridge |
| Causes: | 534 Incorrect ink cartridge is used. 560 Ink RF-Tag is not detected on ink bottle. 561 Ink RF-Tag communication error (communication with the ink cartridge was interfered by noise). 562 Wrong ink cartridge information on the Ink RF-Tag. 564 Detected a mismatch in the Ink RF-Tag. 575 RF-Tag software error. |
| Remedy: | Replace with correct ink cartridge. |
| Error code: | D05 |
| Display: | D05-xxx Set Master in Place |
| Description: | Master not set |
| Causes: | 210 Master detection sensor is OFF (not detecting master material). |
| Remedy: | Insert leading edge of the master material into the master entrance and close the master making unit. |
| Error code: | D07 |
| Display: | D07-xxx Set Master Disposal Box in Place |
| Description: | Master disposal box not set |
| Causes: | 310 Master disposal box safety switch is OFF. (Does not detect the error during low-power mode in which 24V power is down) |
| Remedy: | Set master disposal box in the machine. |
| Error code: | D08 |
| Display: | D08-xxx Set Master Making Unit in Place |
| Description: | Master making unit not set |
| Causes: | 224 Master making unit is not set (both the safety switch and lock sensor are OFF). 226 Master making unit safety switch is still OFF when the master making unit is set in position. 227 Master making unit lock sensor is still OFF when the master making unit is set in position (timeout: 5 seconds). 228 Master making unit lock sensor is still ON even after the master making unit safety switch went OFF, when the master making unit was pulled out of the machine. |
| Remedy: | Insert the master making unit in the machine. |
| Error code: | D09 |
| Description: | Master making unit cover is not closed |
| Causes: | 212 Master making unit cover set sensor is OFF. |
| Remedy: | Close the master making unit cover. |
| Error code: | D11 |
| Description: | Front cover not closed |
| Causes: | 535 Front cover set sensor is OFF. |
| Remedy: | Close the front cover of the machine. |
| Error code: | D13 |
| Display: | D13-xxx Rear Cover of Main Body is Off Call Service |
| Description: | Rear cover not closed |
| Causes: | 009 The rear cover is opened (serviceman safety switch is OFF). |
| Remedy: | Close the rear cover of the machine to activate the rear cover (serviceman safety) switch. [Field serviceman has to close and screw-on the rear cover] |
| Error code: | D17 |
| Display: | D17-xxx Wrong-type Master Installed or Cannot Read Master Info Replace Master Roll or Contact dealer/Riso office |
| Description: | Incorrect master roll |
| Causes: | 236 Incorrect master roll. 237 Master roll RF-Tag not detected. 238 Master roll RF-Tag communication error. (Communication interrupted by noise) 239 Incorrect information on the Master roll RF-Tag. 241 Mismatch in the Master roll RF-Tag information. 256 Master roll RF-Tag software error. |
| Remedy: | Set correct master roll in the machine. |
| Error code: | D18 |
| Description: | Print cylinder (drum) is ready for removal |
| Causes: | 522 Print Cylinder (Drum) is unlocked for its removal. (Drum lock Solenoid is ON). |
| Remedy: | Pull out the print Cylinder (Drum). |
| Error code: | D19 |
| Description: | Master making unit is ready for removal |
| Causes: | 223 Master making unit is unlocked for its removal. (Lock Solenoid is ON). |
| Remedy: | Pull out the master making unit. |
| Error code: | D22 |
| Description: | Print cylinder (drum) removal command |
| Causes: | 540 Cannot access to the EEPROM on the print drum PCB. 542 Print drum PCB EEPROM data error. |
| Remedy: | Pull out print cylinder (drum) from the machine. |
| Error code: | D32 |
| Description: | AF Cover Not Closed |
| Causes: | 177 The AF cover is opened. |
| Remedy: | Close the AF cover. |
| Error code: | E01 |
| Description: | Paper leading edge not reaching the exit sensor |
| Remedy: | Is the fuser motor rotating? Y: Is the harness between the LGC board and the exit sensor open-circuited? Is the connector of the paper exit sensor or the connector J123 on the LGC board disconnected? Y: Reconnect the connector. Replace the harness. N: 1. Replace the exit sensor. 2. Replace the LGC board. N: Is the harness between the LGC board and the paper exit sensor open-circuited? Is the fuser motor connector or the connector J122 on the LGC board disconnected? Y: Reconnect the connector. Replace the harness. N: 1. Replace the fuser motor. 2. Replace the LGC board. Where was the paper stopped? Near the exit sensor (paper not damaged) Are the registration seRemove the paper after the fuser unit cools down.nsor and paper exit sensor functioning properly? (Does the actuator return normally?) Y: 1. In the tRemove the paper after the fuser unit cools down.est mode (03) check if each sensor is functioning. 2. Reconnect each sensor connector. N: Repair the actuator if it has come off. Before reaching the fuser unit Did the paper stop, curling upward excessively? Y: Replace the paper in the cassette. From the transfer belt surface to the exit sensor Do the size of paper and the size set match? N: Make the sizes match. Y: Is the transfer belt moving? Is the black drum motor or the transfer belt motor stopped? Or is any abnormal noise heard from one of them due to loss of synchronism? Y: 1. Reduce the mechanical load by adjusting the drive system. Remove any foreign matter. 2. Check the motor connector, and the connector J130 on the LGC board. 3. Replace the motor. 4. Replace the LGC board. No paper found Is the paper attached to the fuser belt? Remove the paper after the fuser unit cools down. |
| Error code: | E02 |
| Display: | E02-xxx !!Maintenance!! Call Service |
| Description: | Paper trailing edge not passing the exit sensor |
| Remedy: | Is the fuser motor rotating? Y: Is the harness between the LGC board and the exit sensor open-circuited? Is the connector of the paper exit sensor or the connector J123 on the LGC board disconnected? Y: Reconnect the connector. Replace the harness. N: 1. Replace the exit sensor. 2. Replace the LGC board. N: Is the harness between the LGC board and the paper exit sensor open-circuited? Is the fuser motor connector or the connector J122 on the LGC board disconnected? Y: Reconnect the connector. Replace the harness. N: 1. Replace the fuser motor. 2. Replace the LGC board. Where was the paper stopped? Near the exit sensor (paper not damaged) Are the registration seRemove the paper after the fuser unit cools down.nsor and paper exit sensor functioning properly? (Does the actuator return normally?) Y: 1. In the tRemove the paper after the fuser unit cools down.est mode (03) check if each sensor is functioning. 2. Reconnect each sensor connector. N: Repair the actuator if it has come off. Before reaching the fuser unit Did the paper stop, curling upward excessively? Y: Replace the paper in the cassette. From the transfer belt surface to the exit sensor Do the size of paper and the size set match? N: Make the sizes match. Y: Is the transfer belt moving? Is the black drum motor or the transfer belt motor stopped? Or is any abnormal noise heard from one of them due to loss of synchronism? Y: 1. Reduce the mechanical load by adjusting the drive system. Remove any foreign matter. 2. Check the motor connector, and the connector J130 on the LGC board. 3. Replace the motor. 4. Replace the LGC board. No paper found Is the paper attached to the fuser belt? Remove the paper after the fuser unit cools down. |
| Error code: | F01 |
| Display: | F01-xxx No Master on Print Cylinder (Drum) Make a New Master |
| Description: | • No master is detected on the print drum at the start of printing. |
| Causes: | • No master is detected on the print drum at the start of printing. |
| Remedy: | The warning display can be cleared by any of the following: • Press the <STOP> key. • Press the <RESET> key. |
| Error code: | F02 |
| Description: | Master image larger than paper size: 1 |
| Causes: | 018 Paper size does not match with the image size on the print drum at the start of printing. The paper size is smaller than the image size on the master. |
| Remedy: | Press [OK] or [Cancel] button. Also check the paper size. |
| Error code: | F03 |
| Description: | Multi-up printing - Incorrect paper size |
| Causes: | 016 Tried to make multi-up printing with incorrect paper size. |
| Remedy: | Press reset key and place correct size papers on the paper feed tray. |
| Error code: | F05 |
| Display: | F05-xxx Enter Print Quantity Over The Programmed Minimum Value |
| Description: | Print quantiy under Minimum Print Quantity |
| Causes: | 019 In master making, the print quantity selected is less than the minimum print quantity. |
| Remedy: | Enter print quantity value over the programmed minimum value. |
| Error code: | F08 |
| Description: | Auto Tray - Paper Size and Original Size does not Match |
| Causes: | 017 When the Auto-Tray is selected, the original size (scanning ratio) and the printing paper set on the tray(s) did not match. |
| Remedy: | Press CANCEL button, and check the paper and original size. |
| Error code: | F10 |
| Description: | HDD formatting error |
| Causes: | 021 Paper size does not match with the size of image on the print drum when test print is selected and activated. |
| Remedy: | (1) Format the HDD. (Enter "2" into 08-690) (2) Check if the HDD is mounted. (3) Check if the specified HDD is mounted. (4) Check if the connector pins of the HDD are bent. (5) Check if the power supply connector is disconnected. (6) Check if the connector J144 on the SYS board is disconnected. (7) Replace the HDD. (8) Replace the SYS board. (9) Replace the harness. * When changing a HDD, do the following operations after replacing a new one. 1. Formatting of the HDD <Procedure> (1) Turen ON the power while the digital keys [0] and [8] are pressed simultaneously. (2) Confirm that "Test Mode" is displayed on the control panel. Enter the code "690" and press the [START] key. The display changes to "System Mode". (3) Enter "2" and press the [SET] or [INTERRRUPT] key. (4) [WAIT] is displayed. (5) Turn OFF the power after the message [REBOOT THE MACHINE] is displayed. 2. Downloading of the UI data |
| Error code: | F12 |
| Description: | Communications error between system-CPU and scanner-CPU |
| Causes: | 024 Irregular size original was used when Auto-Tray was selected. |
| Remedy: | Did the error occur immediately after updating the firmware? Y: Are the proper files saved in the PC? (In case of updating by PC) Are the type, attaching position and direction of the ROM correct? (In case of updating by download jig) N: After correcting, perform the firmware updating again. N: 1. Check if the IMG board connector J161 is disconnected. 2. Check if the SCM board connector J1 is disconnected. 3. Check if the harness between the IMG and SCM boards is open-circuited. 4. Check if the IMG board is securely connected to the MTH1 board. 5. Check if the SYS board is securely connected to the MTH1 board. 6. Check the version of FROM on the SYS board. 7. Check the version of FROM on the SCM board. 8. Check the scanner related setting values (08-360 and 361). 9. Replace the SYS board. 10. Replace the IMG board. 11. Replace the SCM board. |
| Error code: | F15 |
| Description: | Paper size does not match with the paper on the paper receiving tray |
| Causes: | 042 With the auto-control-paper-receving-tray connected, the paper on the receiving tray is larger than the printing paper. |
| Remedy: | Press [CANCEL] button |
| Error code: | F17 |
| Description: | Print cylinder (drum) size does not match |
| Causes: | 027 Different size print cylinder (drum) from the previous is set. |
| Remedy: | Select the same drum as specified, or install the same drum installed previously. |
| Error code: | F18 |
| Description: | Paper Size and Original Size Do Not Match |
| Causes: | 875 The paper size and the original size (reproduction ratio) does not match in mastermaking. (The error message is for machines with MTPF unit and when Auto-Tray is selected. |
| Remedy: | Press either the START or STOP key. |
| Error code: | F21 |
| Display: | F21-xxx |
| Description: | Next Original not set on AF for Multi-Up |
| Causes: | 032 Next original is not set on AF whe multi-up is selected. |
| Remedy: | Set original on the AF. Or press STOP key (time-out exists for pressing the STOP key). |
| Error code: | F22 |
| Description: | Next Original not placed on FB for Multi-Up |
| Causes: | 033 Next Original not placed on FB for Multi-Up scanning. |
| Remedy: | Set origial on the FB and press START key. Or press STOP key (Time-out exists for pressing the STOP key) |
| Error code: | F24 |
| Description: | Auto Reproduction Size Selection Not Possible |
| Causes: | 037 The reproduction ratio does not match. |
| Remedy: | Press [STOP] key |
| Error code: | F30 |
| Description: | Possible Multiple Paper Feed |
| Causes: | 425 Multiple paper feed is detected on the first paper fed through. 426 Multiple paper feed is detected on the paper just fed through. (Other than the 1st paper.) |
| Remedy: | Press [STOP] key |
| Error code: | F31 |
| Description: | Modem IC does not work normal |
| Causes: | 836 HP sensor did not go ON when the side fences made initial home position movement. 837 HP sensor did not go OFF when the side fences should have left home position. 838 HP sensor did not go ON when the end fence made initial home position movement. 839 HP sensor did not go OFF when the end fence should have left home position. 868 Even though the End fence pulse motor ended its movement by the sensor detection, the sensor status does not match with the programmed status. 869 Even though the Side fence pulse motor ended its movement by the sensor detection, the sensor status does not match with the programmed status. 870 The End fence pulse motor does not stop either by its pulse count stop nor by sensor detected stop. 871 The Side fence pulse motor does not stop either by its pulse count stop nor by sensor detected stop. |
| Remedy: | Press either the {START] or [STOP] key. |
| Error code: | F32 |
| Description: | Storage Data - Storage Area Full |
| Causes: | 713 The DM-128 card became full while saving data. |
| Remedy: | Press [STOP] key |
| Error code: | F37 |
| Description: | Book mode: AF cannot be used |
| Causes: | 050 Original was set on the AF with book mode selected in master making. |
| Remedy: | Place original on the stage glass. |
| Error code: | F40 |
| Description: | Auto Tray Selection - No Paper on Standard Paper Feed Tray |
| Causes: | 060 The paper ran out from the standard paper feed tray, when printing from the standard paper feed tray using the Auto tray selection with Feed-tray-relay activated. (Other trays also paper empty.) 907 The paper ran out from the standard paper feed tray, when printing from the standard paper feed tray using the Auto tray selection with Feed-tray-relay OFF. |
| Remedy: | Load paper on the standard paper feed tray. |
| Error code: | F41 |
| Description: | Initial detection error of the offset catch tray |
| Causes: | 061 The paper ran out from MTPF Tray No.1, when printing from the Tray No.1 using the Auto tray selection with Feed-tray-relay activated. (Other trays also paper empty.) 908 The paper ran out from MTPF Tray No.1, when printing from Tray No.1 using the Auto tray selection with Feed-tray-relay OFF. |
| Remedy: | Load paper in MTPF Tray No.1. |
| Error code: | F42 |
| Description: | Auto Tray Selection - No Paper in Tray-2 |
| Causes: | 062 The paper ran out from MTPF Tray No.2, when printing from the Tray No.2 using the Auto tray selection with Feed-tray-relay activated. (Other trays also paper empty.) 909 The paper ran out from MTPF Tray No.2, when printing from Tray No.2 using the Auto tray selection with Feed-tray-relay OFF. |
| Remedy: | Load paper in MTPF Tray No.2. |
| Error code: | F43 |
| Description: | Data printing / Paper size mismatch |
| Causes: | 902 Original size is larger than the paper size. |
| Remedy: | Check paper size, press Cancel or Continue key. |
| Error code: | F44 |
| Description: | Auto Reproduction Size - Error Between Original Size and Paper Size |
| Causes: | 901 Original size could not be detected (original size out of the specification). |
| Remedy: | Press [CANCEL] button. |
| Error code: | F45 |
| Description: | Original Undetected |
| Causes: | 954 Auto-tray or Auto-reproduction size is selected, and master making or print to linked printer is started with original undetected 959 Master making or print to a linked printer is started with original undetected. 981 The original not detected when [NEXT] button was pressed in Multi-Up Wizard display. |
| Remedy: | Reset the original in place. |
| Error code: | F47 |
| Description: | AF - card size reproduction not available |
| Causes: | 904 Reproduction size from A4 size reduced to card size is selected and the original is placed on the AF unit. |
| Remedy: | Remove original from AF and set it on the stage glass. |
| Error code: | F48 |
| Description: | Multi-Up - Wrong Original Size |
| Causes: | 955 During the multi-up operation, the original size was detected as customs size or out of specification. |
| Remedy: | Press [STOP] key. |
| Error code: | F49 |
| Description: | Multi-Up - No Original |
| Causes: | 989 The original was undetected when Multi-Up operation was selected for either one original or multi-original. |
| Remedy: | Press [STOP] key |
| Error code: | F52 |
| Description: | Printing from Linked Printer disabled - Printer data not received |
| Causes: | 912 Printing from linked printer disabled (Linked printer data not received). |
| Remedy: | Press the [CLOSE] button. |
| Error code: | F58 |
| Description: | Printing from Linked Printer Disabled - Initializing NET-C |
| Causes: | 927 Printing from Linked Printer disabled (NET-C/D being initialized). |
| Remedy: | Press the [CLOSE] button. |
| Error code: | F60 |
| Description: | [Printer-Auto-Selection disabled: Print quantity selected is 0 |
| Causes: | 929 Auto-printer-selection is disabled with print quantity selected as Zero. |
| Remedy: | Press either [OK] or [Cancel] button. |
| Error code: | F61 |
| Description: | Linked Printer - Wrong Paper Size |
| Causes: | 930 Original size does not match with the paper size set on the linked printer. |
| Remedy: | Press [CANCEL] button. |
| Error code: | F62 |
| Description: | Printer-Auto-Selection disabled - Linked printer error |
| Causes: | 956 Auto-printer-selection is disabled due to linked printer error. |
| Remedy: | Press [Cancel] button. |
| Error code: | F63 |
| Description: | Linked Printer - Auto Tray Selection not avaialble for Irregular Size Original |
| Causes: | 971 Auto-Tray-Selection was used in printing from the linked printer using irregular sized original. |
| Remedy: | Press [CANCEL] button |
| Error code: | F64 |
| Description: | Selected Function Not Available While Processing Print Data from PC |
| Causes: | 964 Scanning, Overlay, Digitizer or Hold function was selected while the printer is receving data from PC. |
| Remedy: | Press {CLOSE] button. |
| Error code: | F65 |
| Description: | Scan Mode - Auto Page Size Selection Not Available for Irregular Size Original |
| Causes: | 965 The auto-size (save data) selection at start of scanning is detected as original irregular in size. |
| Remedy: | Press [RESET] key. |
| Error code: | F66 |
| Description: | Linked printer saddle stitching is disabled |
| Causes: | 962 Specified tray does not have any A3 (Ledger), B4 (Legal), A4 (Letter) or A4L (Letter-L) when printing from linked printer with saddle stitching selected. |
| Remedy: | Press [Close] button. |
| Error code: | F67 |
| Description: | Linked printer saddle stitching is disabled |
| Causes: | 963 Specified size papers are not set in horizontal and vertical directions in the linked printer tray, when printing from linked printer with rotation sorting selected. |
| Remedy: | Press [Close] button. |
| Error code: | F73 |
| Description: | Linked Printer - Auto Tray Selection Not Available with Selected Reproduction Ratio |
| Causes: | 975 In Linked Printer printing, the detected original size does not match with the selected reproduction size. |
| Remedy: | Press [STOP] key. |
| Error code: | F74 |
| Description: | High Speed Printing - Printer Temperature is Too Low for 180 ppm High Speed Printing |
| Causes: | 980 High speed printing was selected with the machine temperature below 15 degrees Celcius. |
| Remedy: | Press [STOP] or [START] key. |
| Error code: | F78 |
| Description: | Editor - Stage Cover is Opened |
| Causes: | 731 The stage cover is opened during the digitizer operation. |
| Remedy: | Close the stage cover and press [CLOSE] button. |
| Error code: | F79 |
| Description: | Editor - No Original During Re-Scanning |
| Causes: | 732 The original was not detected during re-scanning. |
| Remedy: | Press [STOP] key |
| Error code: | F85 |
| Description: | External CI - Scanning Not Possible with External CI not Connected |
| Causes: | 995 Either the PS7R is not connected or improperly connect. |
| Remedy: | Press [CLOSE] button or press [START] key. |
| Error code: | F86 |
| Description: | Auto Tray Selection - Tray Cannot Be Selected with Selected Reproduction Ratio |
| Causes: | 864 With the Auto Tray selected, the master-making was activated with original size which does not match with the reproduction ratio against the printing paper. |
| Remedy: | Press [STOP] Key |
| Error code: | F87 |
| Description: | Auto Tray Selection - Mult-Up Not Possible |
| Causes: | 865 Multi-Up was chosen with Auto Tray selected. |
| Remedy: | Press [ENTER] button or [CANCEL] button. |
| Error code: | F88 |
| Description: | Auto Tray Selection - 2 UP Selection Error |
| Causes: | 866 With Auto Tray selected, the 2-UP was selected with printing papers other than A4R or B5R. |
| Remedy: | Press [STOP] key |
| Error code: | F89 |
| Description: | Interposer Mode - Wrong Paper Size |
| Causes: | 867 Interposer mode was selected with interposal paper smaller than the printing paper. |
| Remedy: | Press [STOP] key. |
| Error code: | F90 |
| Description: | Ink Supply Stock Inventory |
| Causes: | 957 Set quantity of the specified color ink stock quantity is equal to or less than the calculated stock quantity. |
| Remedy: | Press [CLOSE] button. |
| Error code: | F91 |
| Description: | Master Roll Supply Stock Inventory |
| Causes: | 958 Set quantity of the specified master roll stock quantity is equal to or less than the calculated stock quantity. |
| Remedy: | Press [CLOSE] button. |
| Error code: | F92 |
| Description: | Original Size - Larger than the Master Making Size |
| Causes: | 874 Master making was selected with an original larger in size than the paper size when Auto Tray selection is made and reproduction ratio at 100%. (The error message appears only on the machines with MTPF unit and Auto Tray selected.) |
| Remedy: | Press [START] key, or [STOP] key. |
| Error code: | F93 |
| Description: | Finisher Jog Motor Failure An error was detected in either the Front or Rear Alignment Motor. |
| Causes: | • Paddle Assembly • Alignment Motors |
| Remedy: | 1 Check the following for evidence of fault or damage: • Paddle Assembly • Alignment Motors Is there any damage? Replace any damaged parts. Go to Step 2. 2 Test the Alignment Plate Sensors. Run the Service Diagnostics Front and Rear Alignment Plate Sensor tests. Do the sensors function correctly? Replace the Paddle Assembly, Replace the sensor. |
| Error code: | F94 |
| Description: | Protect Mode - Discard Current Master |
| Causes: | 007 The protect function is active when machine power is turn ON, machine woke up from sleep, or print drum is inserted into the machine. |
| Remedy: | Press [START] key. |
| Error code: | F95 |
| Description: | Protect Mode - Confirmation |
| Causes: | 008 The job completes when the protect mode is selected active by the Admin. display. |
| Remedy: | Press [START] key, or press [STOP] key. |
| Error code: | H1 |
| Display: | H1-Hard Disk Read Error |
| Description: | There was a hard disk read error that prevented the data from being read. Press the Enter button to clear the message. Turn off the printer, wait 15 seconds, then turn on the printer. |
| Causes: | H1 Select the same color as the Print Cylinder (Drum) currently in use. |
| Remedy: | 1. Turn the printer off and on again. 2. Ensure the hard drive is properly installed. 3. Re initialize the hard drive. by scrolling to the Reset Menu and selecting the submenu item Disk Init. 4. Replace the hard drive. 5. Replace the system controller board |
| Error code: | H2 |
| Display: | H2-Hard Disk Write Error |
| Description: | Fuser thermistor |
| Causes: | Thermistor trouble Control PWB trouble Fusing section connector disconnection AC power trouble Fusing unit not installed |
| Remedy: | 1. Turn the printer off and on again. 2. Ensure the hard drive is properly installed. 3. Re initialize the hard drive. by scrolling to the Reset Menu and selecting the submenu item Disk Init. 4. Replace the hard drive. 5. Replace the system controller board |
| Error code: | H3 |
| Display: | H3-Hard Disk Full |
| Description: | Fuser temperature too high. Must be reset in diagnostics |
| Causes: | Thermistor trouble Control PWB trouble Fusing section connector disconnection AC power trouble |
| Remedy: | 1. Turn the printer off and on again. 2. Ensure the hard drive is properly installed. 3. Re initialize the hard drive. by scrolling to the Reset Menu and selecting the submenu item Disk Init. 4. Replace the hard drive. 5. Replace the system controller board |
| Error code: | H4 |
| Display: | H4-Hard Disk Formatting |
| Description: | Fuser temperature too low. Must be reset in diagnostics |
| Causes: | Thermistor trouble Heater lamp trouble Control PWB trouble Thermostat trouble AC power trouble Interlock switch trouble |
| Error code: | H5 |
| Display: | H5-Hard Disk Initializing |
| Description: | The hard disk is being initialized. Data cannot be written to the disk until the formatting is completed. |
| Causes: | H5 Select a Print Density level to match the master to fine-tune print result. |
| Error code: | H6 |
| Description: | Lower thermistor |
| Causes: | H6 Select a Print Density level of the first print (proof-read copy) to match the master. |
| Remedy: | Enter the required parameter value. |
| Error code: | T01 |
| Description: | Main motor lock |
| Causes: | 520 Main encoder sensor does not go ON/OFF within 10 milliseconds after the main motor activates. 520 Main motor lock detection due to main motor FG sensor count reduced to 50% of the set speed. (The detection is not made for the first 2 seconds from the main motor movement.) 521 B-positioning sensor status does not change even after 3,033 pulses after the main motor activates. 524 Clamp unit is not at the home position while the print drum is in operation (except during master disposal). 537 Print drum failed to stop at position B. 538 Print drum is not locked during operation. (Drum lock sensor: OFF) |
| Remedy: | Press Reset Key |
| Error code: | T02 |
| Description: | Elevator motor lock |
| Causes: | 400 Both the upper and lower limit sensors are ON at the same time. 401 Overload current was detected in the elevator motor. 404 The lower-limit sensor does not go OFF within 2 seconds after the elevator motor operates in the raising direction from the lower-limit position. 405 The upper-limit sensor does not go ON within 12 seconds after the elevator motor operates in the raising direction. 406 The upper-limit sensor does not go OFF within 2 seconds after the elevator motor operates in the lower direction from the upper-limit position. 407 The lower-limit sensor does not go ON within 12 seconds after the elevator motor operates in the lowering direction. 408 The upper-limit sensor is OFF continuously for over 2 seconds during operation of the elevator servo action to raise the feed tray. |
| Remedy: | Press Reset Key or turn OFF and ON the power. |
| Error code: | T03 |
| Description: | Clamp motor lock |
| Causes: | 500 Clamp sensor A is OFF after the completion of the clamp unit initialization or home positioning movement. 501 Clamp sensor B does not change within 1 second from the time the clamp motor operates in the forward direction. 502 Clamp sensor B does not change within 1 second from the time the clamp motor operates in the reverse direction. 503 Clamp sensor A does not go ON within 3 seconds when the clamp unit makes initialization movement. 504 At the start of Clamp plate open/close action, the detection sequence of clamp-sensors A & B are abnormal. 505 At the start of print drum Position-A compensation movement, the detection sequence of clamp-sensors A & B are abnormal. 506 At the start of Clamp unit Home-positioning movement, the detection sequence of clampsensors A & B are abnormal. 507 Clamp sensor A is ON after the clamp release action is completed. 508 Clamp sensor A is ON after the A-position compensating movement is completed. 545 Clamp unit is not in the home position while the print drum is in movement (cause due to the clamp motor). |
| Remedy: | Press Reset Key |
| Error code: | T04 |
| Description: | Ink overflow |
| Causes: | 513 The overflow sensor is ON for a set number of times in succession during the 10- millisecond-interval overflow-sensor check. |
| Remedy: | Press Reset Key after correcting the ink overflow condition. (No ink on the ink overflow sensor.) |
| Error code: | T05 |
| Description: | Vertical print positioning pulse motor lock |
| Causes: | 603 The vertical-centering sensor does not switch ON even when the vertical-positioning pulse motor activated in the image-down direction for 5.0 seconds during vertical home positioning movement. 603 The vertical-centering sensor does not switch ON even when the vertical-positioning pulse motor activated in the image-down direction for 5.5 seconds during vertical home positioning movement. 603 The vertical-centering sensor does not switch ON even when the vertical-positioning pulse motor activated in the image-down direction for regulation time during vertical home positioning movement. 604 The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse motor activated in the image-up direction for 5.0 seconds during vertical home positioning movement. 604 The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse motor activated in the image-up direction for 5.5 seconds during vertical home positioning movement. 604 The vertical-centering sensor does not switch OFF even when the vertical-positioning pulse motor activated in the image-up direction for regulation time during vertical home positioning movement. 605 Even though the vertical positioning motor stopped according to the vertical centering sensor detection, the stopping position does not correspond with the programmed position. (GA control error). 612 The print positioning key is pressed with vertical-print-position information undefined. 619 The vertical positioning motor does not end its operation within the set period during the recovery movement to rotate -98 pulses. 632 The vertical positioning motor does not end its operation within the set period in the pulse count stop mode, or in the sensor stop mode after the actuator is detected by the sensor. |
| Remedy: | Press Reset Key or turn the power OFF and ON. |
| Error code: | T06 |
| Description: | Print drum horizontal pulse motor lock |
| Causes: | 607 The actuator plate does not escape from the horizontal HP sensor when the print drum slides to the right during the horizontal HP movement. 608 The actuator plate does not escape from the horizontal HP sensor when the print drum slides to the left during the horizontal HP movement. 609 Even though the horizontal positioning pulse motor stopped after the sensor stop mode, the sensor detection status did not match with the programmed status. 611 Timeout error during print drum horizontal movement. 617 Horizontal movement system information error. 618 The clamp unit is not in its HP position when the print drum starts its horizontal movement. 633 The horizontal positioning pulse motor does not end its operation within the set period in the pulse count stop mode, or in the sensor stop mode after the actuator is detected by the sensor. |
| Remedy: | Press Reset Key or turn the power OFF and ON. |
| Error code: | T08 |
| Description: | Communication error with CI |
| Causes: | 951 The file is not a correct RINC data. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T09 |
| Description: | Sorter error |
| Causes: | 003 Sorter communication error. 700 Sorter communication error: The /CTS does not change to LOW even after 3 seconds from power ON. 701 Sorter communication error: The machine status information is not received from the sorter even after 0.2 seconds from the initialization command. 712 Sorter communication error: The retry command was not received. 720 Sorter communication error: The retry command was not received twice consecutively. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T10 |
| Description: | Multi-tray paper feeder error |
| Causes: | 801 The machine model status did not come back from MTPF when powered ON. 802 Ready command did not come back from MTPF at the start of print operation. 803 The status information did not come back from MTPF. 804 Call service error command is received from MTPF. (No encoder sensor data even after 0.1 second from the time the FL Transfer Motor activated.) 840 Unknown command was received from MTPF. 844 Communication error was received from MTPF. 845 Overload current detected on MTPF Tray-1 elevator motor. 846 Overload current detected on MTPF Tray-2 elevator motor. 847 Elevator motor lock on MTFP Tray-1. 848 Elevator motor lock on MTFP Tray-2. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T11 |
| Description: | Print pressure pulse motor lock |
| Causes: | 600 Print pressure HP sensor does not switch ON within 5 seconds after the print pressure pulse motor activated towards higher pressure during home positioning operation. 600 Print pressure HP sensor does not switch ON within 3.9 seconds after the print pressure pulse motor activated towards higher pressure during home positioning operation. 601 Print pressure HP sensor does not switch OFF within 5 seconds after the print pressure pulse motor activated towards lower pressure during home positioning operation. 601 Print pressure HP sensor does not switch OFF within 4.6 seconds after the print pressure pulse motor activated towards lower pressure during home positioning operation. 602 Even though the print pressure control pulse motor stopped according to the print pressure HP sensor detection, the stopping position does not correspond with the programmed position. (GA control error). 614 Print pressure pulse motor does not complete its movement even after 7 seconds from the print pressure HP movement to move -1000 pulses. 614 Print pressure pulse motor does not complete its movement even after 1.2 time the set period passed from the print pressure HP movement to move -1000 pulses. 631 The print pressure pulse motor does not end its operation within the set period in the pulse count stop mode, or in the sensor stop mode after the actuator after the actuator is detected by the sensor. |
| Remedy: | Press Reset Key or turn the power OFF and ON. |
| Error code: | T12 |
| Description: | Master disposal area motor lock |
| Causes: | 300 Overload current was detected in the master disposal motor. 301 Master compression motor lock when moving compression plate up. 305 Master compression sensor does not go ON within 6.5 seconds after the master compression motor operates in the return direction. 305 Master compression sensor does not go ON within 7.5 seconds after the master compression motor operates in the return direction. 306 Master compression sensor does not go OFF within 2 seconds after the master compression motor operates in the compress direction. 307 Master compression plate maximum position is not detected within 6.5 seconds after the master compression motor operates in the compress direction. 307 Master compression plate maximum position is not detected within 7.5 seconds after the master compression motor operates in the compress direction. 309 The FG sensor status on the master compression motor does not change even after 2 seconds from the motor activation. 309 Master-compression-motor encoder sensor count did not change as the master compression motor activated in the compress direction and moved out from the home position. 309 The FG sensor status on the master compression motor did not change for 50 consecutive times during 10 millisecond polling. 316 Master-compression-motor encoder sensor count did not change within 10 milliseconds after the master compression motor activated. 316 The master-disposal-motor FG sensor count dropped to 50% of the set speed. (The speed check starts 2 seconds after the activation of the motor.) |
| Remedy: | Press Reset Key. |
| Error code: | T13 |
| Description: | Cutter motor lock |
| Causes: | 203 Cutter HP switch does not go OFF within 100 milliseconds after the cutter motor is activated. 204 Cutter HP switch does not go ON within 300 milliseconds after the cutter motor is activated. 205 Master-positioning sensor is ON when the print drum rotates through the preset angle following master cutting. 222 Cutter HP switch does not go ON within 450 milliseconds after the cutter home positioning operation started. |
| Remedy: | Press Reset Key. |
| Error code: | T14 |
| Description: | Flatbed error |
| Causes: | 112 The scanner HP sensor does not go OFF within given time. 113 The scanner HP sensor does not go ON within given time. 114 Incorrect main-unit data. 115 The scanner operation is not completed within the set time. 116 Timeout error for black shading compensation. 117 Timeout error for white shading compensation. 118 Software error 123 Offset adjustment not completed within set time. 124 Gain adjustment not completed within set time. 125 Offset adjustment not completed. 126 Gain adjustment not completed. 135 Malfunction detected during offset adjustment. 136 Malfunction detected during gain adjustment. 137 Malfunction detected during black shading compensation. 138 Malfunction detected during white shading compensation. 160 The scanner model information is missing. 170 Even though the read pulse motor stopped according to the sensor detection, the stopping position does not correspond with the programmed position. (GA control error). |
| Remedy: | Press Reset Key. |
| Error code: | T15 |
| Description: | AF error |
| Causes: | 100 AF original IN sensor adjustment error. 101 AF-EEPROM error. 110 ABC (auto-base-control) timeout. The original does not move from the ABC scanning position on the AF unit. 111 Operation command was made to the AF unit without 24 volts supplied to the AF unit. 130 Timeout error in receiving reply from the AF unit after command signal was sent from the Riso printer to the AF unit. 131 Riso printer received an undefined command from the AF unit. 132 Riso printer detected communication sequence error from the AF unit. 133 Communication error with AF unit (ACK, NAK, or receiving channel error). 134 Riso printer could not send command to the AF unit within the set time. 161 AF unit not connected. |
| Remedy: | Turn OFF and ON the power. |
| Error code: | T17 |
| Description: | Solenoid counter not connected |
| Causes: | 020 Solenoid counter is not connected. |
| Remedy: | Connect the solenoid counter. |
| Error code: | T18 |
| Description: | Drum-lock-solenoid lock |
| Causes: | 531 Print drum lock sensor is still ON even after 100 milliseconds after the print drum lock solenoid is activated. |
| Remedy: | Press Reset key |
| Error code: | T19 |
| Description: | Thermal-pressure motor lock |
| Causes: | 207 TPH pressure sensor does not go OFF within 2 seconds after the thermal-pressure motor activates in the decompressing direction, or during home positioning operation. 208 TPH pressure sensor does not go ON within 2 seconds after the thermal-pressure motor activates in the decompressing direction. 216 TPH pressure sensor does not go OFF within 2 seconds after the thermal-pressure motor activates in the compressing direction. 217 TPH pressure sensor does not go ON within 2 seconds after the thermal-pressure motor activates in the compressing direction. |
| Remedy: | Press Reset key |
| Error code: | T20 |
| Description: | Paper-ejection-section motor lock |
| Causes: | 414 Paper ejection wing HP sensor status does not change within set time after the paper ejection wing motor activated for the wing home position movement. 415 Paper-ejection-wing home sensor does not go OFF within 7 seconds after the paper ejection wing motor activates in the clockwise direction from the home position. 415 The paper ejection wing HP sensor does not change from OFF to ON even though the paper ejection wing pulse motor is activated for a given time. 416 Overload current was detected in the paper-ejection motor. 437 Paper-ejection encoder sensor status does not change within 10 milliseconds after the paper-ejection motor is activated. 437 The paper ejection motor FG sensor pulse count dropped to 50% of the set speed. (The detection starts 2 seconds after the paper ejection motor is activated.) 442 Even though the paper ejection pulse motor stopped after the sensor stop mode, the sensor detection status did not match with the programmed status, or the motor does not stop within the set time in the pulse count stop mode. 442 Though the paper ejection wing motor stopped correctly at the wing sensor position, the stopping position does not correspond with the programmed position (GA control error). 456 The paper ejection pulse motor does not end its operation within the set period in the pulse count stop mode, or in the sensor stop mode after the actuator is detected by the sensor. |
| Remedy: | Press Reset key |
| Error code: | T24 |
| Description: | Inking motor lock |
| Causes: | 539 Inking-motor FG sensor status does not change within 20 milliseconds after the inkingmotor is activated. |
| Remedy: | Press Reset key or turn the power OFF and ON. |
| Error code: | T25 |
| Description: | Replace Battery |
| Causes: | 026 Battery voltage is too low when the power is turned ON. (Readjust the machine clock after replacing the battery.) |
| Remedy: | Replace the battery. |
| Error code: | T89 |
| Description: | Master compression plate: incorrect position |
| Causes: | 350 The clamp unit is in the lowered position and the master compression plate is not in the HP position when the print drum starts its movement. (This is to protect the machine parts.) |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T91 |
| Description: | Panel EEPROM error |
| Causes: | 968 Panel EEPROM read error. 969 Panel EEPROM write error. 976 Panel EEPROM check-sum error. 977 Panel EEPROM verify error. |
| Remedy: | Press Reset Key |
| Error code: | T92 |
| Description: | Drum EEPROM write error |
| Causes: | 570 EEPROM on the print drum PCB is being accessed while the print drum is in releasing action from the machine. |
| Remedy: | Press Reset Key |
| Error code: | T93 |
| Description: | NET-C / NET-D hardware error |
| Causes: | 932 No reply from the NET-C or NET-D network interface card while accessing to the network interface card. 933 No response from NET-C for 90 seconds during NET-C initialization. 933 No response from NET-D for 90 seconds during NET-D initialization. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T94 |
| Description: | Call service error: TPH |
| Causes: | 225 TPH code does not match with the machine code when the power is turned ON with the master-making unit in operating position or when the master-making unit is inserted in operating position while the power is ON. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T95 |
| Description: | FRAM error |
| Causes: | 059 Machine serial-number information sent from SH-PCB does not match with the machine serial number information in the MCTL PCB. |
| Remedy: | Turn the power OFF and ON. |
| Error code: | T96 |
| Description: | Data not input |
| Causes: | 171 TPH resistance value not input. 172 Scanner adjustment not completed. 433 Paper size width potentiometer test-mode setting is not completed. 452 Too small difference between the 105mm and 297mm A/D data of the paper feed tray pape 569 Either the print drum color information or ink category information is still not input. 613 Print pressure data missing. 872 MTPF Tray-1 paper width potentiometer value is not input. 873 MTPF Tray-2 paper width potentiometer value is not input. 972 REv data storage area is not initialized. |
| Remedy: | Input the parameters using test mode. |
| Error code: | T97 |
| Description: | PC card access error |
| Causes: | 939 PC card access error: PC card not set. 940 PC card access error: PCMCIA card information error. 941 PC card access error: CF card device error. 942 PC card access error: Same file already exists. 943 PC card access error: Not formatted. 944 PC card access error: Media ID error. 945 PC card access error: Media error (cannot access the PC card). 946 PC card access error: Media error (not enough blank space available on CF card). 990 PC card access error: Specified file not found on the selected drive. 991 PC card access error: Accessed to the file not opened. 992 PC card access error: File information folder is already in use. 993 PC card access error: Incorrect setting on the readout address when sending data to the machine. 994 PC card access error: Unsuccessful file deleting. |
| Remedy: | Press Reset Key |
| Error code: | T98 |
| Description: | Hardware error |
| Causes: | 002 No reply from SH PCB. If SH PCB signal is detected at machine power ON, but if the PCB communication terminates and T98-069 error is detected, the error point is rewrote to this T98-002 error message. 005 Hardware error 006 FRAM check-sum error 025 Defective RF PCB (Unsuccessful initial communication with RF PCB). 034 Unable to write on EEPROM on the machine. (Cannot access EEPROM). 035 CRC error on EEPROM on the machine (Defective EEPROM data). 038 Information between the PCB and EEPROM does not match. 039 Incorrect EEPROM. 051 Communication error with the touch-panel controller. 053 Unsuccessful data readout from the Memory setting (program, mode, user paper). 054 Unsuccessful data writing of the Memory setting (program, mode, user paper). 055 Machine code number sent from SH PCB does not match with that from the Mechanical control PCB. 063 Test mode setting is beyond the adjustable range. 064 Communication error between SH PCB and MCTL PCB. 065 Communication error between SH PCB and MCTL PCB (01) - on MCTL PCB side. 067 Communication error between SH PCB and MCTL PCB (03) - on MCTL PCB side. 068 Communication error between SH PCB and MCTL PCB (04) - on MCTL PCB side. 069 Communication error between SH PCB and MCTL PCB (05) - on MCTL PCB side. 070 Communication error between SH PCB and MCTL PCB (06) - on MCTL PCB side. 071 Communication error between SH PCB and MCTL PCB (07) - on MCTL PCB side. 072 Communication error between SH PCB and MCTL PCB (08) - on MCTL PCB side. 073 Communication error between SH PCB and MCTL PCB (09) - on MCTL PCB side. 074 Communication error between SH PCB and MCTL PCB (10) - on SH PCB side. 075 Communication error between SH PCB and MCTL PCB (11) - on SH PCB side. 076 Communication error between SH PCB and MCTL PCB (12) - on SH PCB side. 077 Communication error between SH PCB and MCTL PCB (13) - on SH PCB side. 078 Communication error between SH PCB and MCTL PCB (14) - on SH PCB side. 079 Communication error between SH PCB and MCTL PCB (15) - on SH PCB side. 080 Communication error between SH PCB and MCTL PCB (16) - on SH PCB side. 081 Communication error between SH PCB and MCTL PCB (17) - on SH PCB side. 082 Communication error between SH PCB and MCTL PCB (18) - on SH PCB side. 083 Communication error between SH PCB and MCTL PCB (19) - on SH PCB side. 084 Communication error between SH PCB and MCTL PCB (20) - on SH PCB side. 098 Machine serial number information on EEPROM does not match with that of FRAM. 119 Defective image PCB (memory check error on the image processing IC). 120 Timeout on the scanner serial communication. 129 Defective scanner gate array PCB (memory check error on the gate array). 245 Timeout error on master transfer during master-making (related to Write pulse motor). 246 Timeout error on master transfer during master-making (related to Load pulse motor). 422 The light emittance from the Paper sensor (send) exceeded the maximum allowance during the Automatic Multiple Paper Feed Adjustment [paper sensor sensitivity adjustment] by Test Mode No.705. 423 The light emittance from the Paper sensor (send) exceeded the minimum allowance during the Automatic Multiple Paper Feed Adjustment [paper sensor sensitivity adjustment] by Test Mode No.705. 921 The USB controler chip is not responding when PC and printer is connected by USB cable. 934 Communication error between MCTL PCB and RF PCB. (on FR PCB side) 935 Communication error between MCTL PCB and RF PCB. (on MCTL PCB side) 937 Undefined serial number. 938 FRAM version down. 947 24V-A does not go ON. (Possible broken Fuse for 24V-A area). 948 24V-A does not go ON. (Possible broken Fuse for 24V-B area). 949 24V-A does not go OFF. 950 24V-B does not go OFF. 952 SH3M2 PCB flash memory check-sum error. 953 Unsuccessful writing on the SH3M2 PCB flash memory. 960 Unsuccessful readout from the SH3M2 PCB flash memory. 961 SH3M2 PCB flash memory unused. 978 Incorrect power ON command from MCTL PCB when machine power turned ON. 979 Abnormal flash memory setting on the SH3M2 PCB. 983 24V-C does not go ON. (Possible broken Fuse for 24V-C area). 984 24V-C does not go OFF. |
| Remedy: | Turn power OFF and ON. |
| Error code: | T99 |
| Description: | Software error |
| Causes: | 181 Timeout on Image processing time. 982 Wrong loader. |
| Remedy: | Turn power OFF and ON. |
