Samsung CLX-9251NA
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
100000
Скорость печати
A4
25
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Цветность печати |
цветная |
Печать фотографий |
|
Телефон |
|
Тип устройства |
МФУ |
Технология печати |
лазерная |
Тип |
лазерный/светодиодный |
Макс. формат |
A3 |
Область применения |
большой офис |
Размещение |
напольный |
Число страниц в месяц |
100 000 |
Сканер |
|
Копир |
|
Факс |
|
Принтер |
|
Количество цветов |
4 |
Макс, длина отпечатка |
420 |
Макс, ширина отпечатка |
297 |
Печать без полей |
|
Пигментные чернила |
|
Двусторонняя печать |
|
Прямая печать |
|
Макс, разрешение для ч/б печати |
|
| По Y | 600 |
| По X | 2 400 |
Скорость ч/б печати |
|
| A4 | 25 |
Макс, разрешение для цветной печати |
|
| По X | 9 600 |
Время выхода первого отпечатка |
|
| Ч/б | 9,5 |
| Цветн, | 11,5 |
Копир |
|
Шаг масштабирования |
0,01 |
Макс, количество копий за цикл |
9 999 |
Время выхода первой копии |
7,5 |
Значение масштаба |
|
| Минимальное | 0,25 |
| Максимальное | 4 |
Макс, разрешение (ч/б) |
|
| По Y | 600 |
| По X | 600 |
Сканер |
|
Макс. формат оригинала |
A3 |
Устройство автоподачи оригиналов |
двустороннее |
Отправка изображения по e-mail |
|
Стандарт TWAIN |
|
Тип сканера |
планшетный/протяжный |
Тип датчика сканера |
ПЗС (CCD) |
Слайд-адаптер |
|
Емкость устройства автоподачи оригиналов |
100 |
Макс, размер сканирования |
|
| По X | 297 |
| По Y | 432 |
Разрешение сканера |
|
| По Y (улучшенное) | 4 800 |
| По Х (улучшенное) | 4 800 |
| По Х | 600 |
Расходные материалы |
|
Количество картриджей |
4 |
Ресурс цветного картриджа/тонера |
15 000 |
Ресурс ч/б картриджа/тонера |
20 000 |
Ресурс фотобарабана |
50 000 |
Печать на: |
|
| Этикетках |
|
| Матовой бумаге |
|
| Конвертах |
|
| Глянцевой бумаге |
|
| Карточках |
|
| Пленках |
|
| Фотобумаге |
|
| Рулоне |
|
| CD/DVD |
|
Плотность бумаги |
|
| Максимальная | 216 |
| Минимальная | 60 |
Факс |
|
Цветной |
|
PC Fax |
|
Телефон |
|
Спикерфон |
|
Стандарт DECT |
|
АОН |
|
Caller ID |
|
Проводная трубка |
|
Автоответчик |
|
Беспроводная трубка |
|
Языки управления |
|
| PostScript 2 |
|
| PPDS |
|
| PCL 5e |
|
| PCL 5c |
|
| PostScript 3 |
|
| PostScript |
|
|
|
|
| PCL 6 |
|
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Максимальная | 2 180 |
| Стандартная | 1 140 |
Вывод бумаги |
|
| Стандартный | 500 |
Финишер |
|
Степлер |
|
Брошюровщик |
|
Сортер |
|
Интерфейсы |
|
Версия USB |
2,0 |
Инфракрасный порт |
|
Устройство для чтения карт памяти |
|
RS-232 |
|
AirPrint |
|
LPT |
|
Bluetooth |
|
Wi-Fi |
|
FireWire (IEEE 1394) |
|
Ethernet (RJ-45) |
|
USB |
|
Веб-интерфейс |
|
Память/Процессор |
|
Емкость жесткого диска |
320 |
Частота процессора |
1 000 |
Процессор |
Chorus4N Dual Core |
Объем памяти |
1 024 |
Дополнительная информация |
|
Диагональ дисплея |
7 |
Экран |
|
Работа от аккумулятора |
|
Поддержка ОС |
|
| Linux |
|
| Windows |
|
| Mac OS |
|
| DOS |
|
Потребляемая мощность |
|
| В режиме ожидания | 100 |
| При работе | 800 |
Уровень шума |
|
| В режиме ожидания | 30 |
| При работе | 53 |
Габариты |
|
Вес |
76 |
Высота |
844 |
Ширина |
560 |
Глубина |
600 |
Модули
FRAME-MAIN ENGINE
DADF PLATEN
MP
DRIVE FUSER-EXIT
PLATEN FR HR-UPPER
CASSETTE-1ST
FRAME MAIN-PICKUP UPPER
Exit
DRIVE-REGI MP
MP-TRAY
DRIVE MAIN
MAIN
CASSETTE-2ND
DADF-SUB
DADF FRAME-MAIN
DADF OPEN-COVER
DADF STACKER
FRAME-MAIN REGI
PLATEN FR HR-LOWER
COVER-SIDE
FRAME MAIN-PICKUP
Fuser
COVER-SIDE GUIDE FEED
OPE
COVER
MP GUIDE-MAIN
PLATEN FR HR
DADF-MOTOR
DADF
FRAME-MAIN
COVER-SIDE EXIT
MP-BRACKET PICK UP
FRAME MAIN-PICKUP 1 2
Детали FRAME-MAIN ENGINE
| Деталь: | STOPPER-REGI |
| Парткод: | JC61-04900A |
| Деталь: | LINK-FEEDING DUCT |
| Парткод: | JC66-03164A |
| Деталь: | GEAR-IDLE FEEDING DUCT |
| Парткод: | JC66-03166A |
| Деталь: | FRAME-REGI HOLDER DUST |
| Парткод: | JC93-00078B |
| Цена: | 500 ₽ |
| Деталь: | DRIVE MAIN |
| Парткод: | JC93-00440A |
| Деталь: | DRIVE FUSER-EXIT |
| Парткод: | JC93-00441A |
| Деталь: | DRIVE-PICKUP |
| Парткод: | JC93-00442A |
| Деталь: | DRIVE-REGI MP |
| Парткод: | JC93-00443A |
| Деталь: | DRIVE-FEED |
| Парткод: | JC93-00444A |
| Деталь: | DRIVE-WTB |
| Парткод: | JC93-00445A |
| Деталь: | DRIVE-TONER SUPPLY |
| Парткод: | JC93-00446A |
| Деталь: | FRAME MAIN-DUCT TONER |
| Парткод: | JC93-00483A |
| Деталь: | FRAME MAIN-DUCT FUSER |
| Парткод: | JC93-00497A |
| Деталь: | FRAME-MAIN REGI |
| Парткод: | JC93-00508A |
| Деталь: | FRAME MAIN-PICKUP 1ST |
| Парткод: | JC93-00511A |
| Деталь: | FRAME MAIN-PICKUP 2ND |
| Парткод: | JC93-00512A |
| Деталь: | FRAME MAIN-FEED 1ST COLOR |
| Парткод: | JC93-00536A |
| Деталь: | FRAME MAIN-FEED 2ND |
| Парткод: | JC93-00537A |
| Деталь: | FRAME-MAIN |
| Парткод: | JC93-00683A |
| Деталь: | FAN-TYPE 7 |
| Парткод: | JC31-00161A |
| Деталь: | COVER-PLATEN |
| Парткод: | JC63-03348A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | COVER-DUMMY_PLATEN |
| Парткод: | JC63-03347A |
| Деталь: | Shaft-Idle_Feed |
| Парткод: | JC66-03211A |
| Деталь: | ROLLER-IDLE SCF |
| Парткод: | JC66-01022B |
| Деталь: | ACTUATOR-SCAN |
| Парткод: | JC66-03210A |
| Деталь: | Spring-ES |
| Парткод: | 6107-003277 |
| Деталь: | GROUND-HINGE_RIGHT |
| Парткод: | JC63-03351A |
| Деталь: | GROUND-HINGE_FRAME |
| Парткод: | JC63-03349A |
| Деталь: | Foot-ML80 |
| Парткод: | JC61-40001A |
| Деталь: | MP |
| Парткод: | JC90-01139A |
| Деталь: | MP GUIDE-MAIN |
| Парткод: | JC90-01126A |
| Деталь: | MP-BRACKET PICK UP |
| Парткод: | JC90-01125A |
| Деталь: | FRAME-MAIN PICK UP ROLLER |
| Парткод: | JC93-00540A |
| Цена: | 700 ₽ |
| Деталь: | GEAR-IDLE MP |
| Парткод: | JC66-03215A |
| Деталь: | BUSH-D6/L4 |
| Парткод: | JC61-00699A |
| Деталь: | BRACKET-SOLENOID |
| Парткод: | JC61-04753A |
| Деталь: | GUIDE-HARNESS R |
| Парткод: | JC61-04762A |
| Деталь: | MP-COVER BASE |
| Парткод: | JC90-01124A |
| Деталь: | COVER-GUDIE BASE |
| Парткод: | JC63-03357A |
| Деталь: | LEVER-EMPTY PAPER |
| Парткод: | JC66-03217A |
| Деталь: | Spring-TS |
| Парткод: | 6107-001771 |
| Деталь: | DRIVE FUSER-EXIT |
| Парткод: | JC93-00441A |
| Деталь: | BRACKET-DRIVE FUSER EXIT |
| Парткод: | JC61-04501A |
| Деталь: | GEAR-RDCN EXIT |
| Парткод: | JC66-03108A |
| Деталь: | GEAR-FUSER ONE WAY |
| Парткод: | JC66-03105A |
| Деталь: | GEAR-HUB CLUTCH |
| Парткод: | JC66-00340A |
| Цена: | 220 ₽ |
| Деталь: | GEAR-RDCN FUSER OUT |
| Парткод: | JC66-00417A |
| Цена: | 240 ₽ |
| Деталь: | GEAR-RDCN FUSER RELEASE |
| Парткод: | JC66-03106A |
| Деталь: | GEAR-FUSER RELEASE |
| Парткод: | JC66-03107A |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00123B |
| Цена: | 3 700 ₽ |
| Деталь: | DRIVE-MOTOR STEP |
| Парткод: | JC93-00452A |
| Деталь: | FRAME-COVER |
| Парткод: | JC61-04693A |
| Деталь: | GROUND-HINGE |
| Парткод: | JC63-03314A |
| Деталь: | HOLDER-HINGE-R |
| Парткод: | JC61-04574A |
| Деталь: | HOLDER-HINGE-L |
| Парткод: | JC61-04573A |
| Деталь: | PBA-SCAN JOINT |
| Парткод: | JC92-02447A |
| Деталь: | PLATEN FR HR-OPEN SENSOR |
| Парткод: | JC97-04003A |
| Деталь: | CASSETTE-1ST |
| Парткод: | JC90-01140A |
| Деталь: | FRAME-CASSETTE 1ST |
| Парткод: | JC61-04712A |
| Деталь: | LOCKER-CASSETTE 1ST |
| Парткод: | JC64-00715A |
| Деталь: | Spring-ES |
| Парткод: | 6107-001761 |
| Деталь: | HOLDER-LOCKER |
| Парткод: | JC61-04886A |
| Деталь: | CASSETTE-COVER |
| Парткод: | JC90-01129A |
| Деталь: | CASSETTE-GUIDE FRONT |
| Парткод: | JC90-01130A |
| Деталь: | CASSETTE-GUIDE REAR |
| Парткод: | JC90-01131A |
| Деталь: | GEAR-M_PINION 24 |
| Парткод: | JC66-01020A |
| Деталь: | SCREW-TAPPING |
| Парткод: | 6002-000440 |
| Деталь: | CASSETTE-BRACKET LIFT |
| Парткод: | JC90-01128A |
| Деталь: | SHAFT-LIFTING CST |
| Парткод: | JC66-03285A |
| Деталь: | GEAR-LIFTING CST |
| Парткод: | JC66-03278A |
| Деталь: | PLATE-LEVER |
| Парткод: | JC61-03206A |
| Деталь: | GUIDE-LEFT |
| Парткод: | JC61-04718A |
| Деталь: | INDICATOR-SIZE REAR |
| Парткод: | JC64-00704A |
| Деталь: | LEVER-LINK SIZE 1ST |
| Парткод: | JC66-03202A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000264 |
| Деталь: | INDICATOR-SIZE SIDE |
| Парткод: | JC64-00703A |
| Деталь: | PLATE-KNOCK UP |
| Парткод: | JC61-04767A |
| Деталь: | SEAL-PAD CST |
| Парткод: | JC62-00946A |
| Деталь: | ROLLER-IDLE CST |
| Парткод: | JC61-03331A |
| Деталь: | FRAME MAIN-PICKUP UPPER |
| Парткод: | JC93-00504A |
| Деталь: | FRAME MAIN-PICKUP BRKT UPPER |
| Парткод: | JC93-00437A |
| Деталь: | SHAFT-PICKUP |
| Парткод: | JC66-03284A |
| Деталь: | ACTUATOR-EMPTY PICKUP |
| Парткод: | JC66-03199A |
| Деталь: | CLUTCH-P_ONE WAY |
| Парткод: | JC66-00977A |
| Деталь: | GEAR-M_PU JOINT |
| Парткод: | JC66-00943A |
| Деталь: | GEAR-M_ONE WAY |
| Парткод: | JC66-00941A |
| Деталь: | GEAR-M_IDLE PU |
| Парткод: | JC66-00940A |
| Деталь: | GUIDE-PICKUP UPPER |
| Парткод: | JC61-04736A |
| Деталь: | GUIDE-SLIDE PICKUP |
| Парткод: | JC61-04722A |
| Деталь: | GUIDE-SUPPORT PICKUP |
| Парткод: | JC61-04716A |
| Деталь: | BRACKET-GRN PICKUP |
| Парткод: | JC61-04670A |
| Деталь: | HOLDER-M_IDLE ONE WAY |
| Парткод: | JC61-01288A |
| Деталь: | Spring-CS |
| Парткод: | 6107-003046 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | Exit |
| Парткод: | JC90-01118A |
| Деталь: | BRACKET-REAR EXIT |
| Парткод: | JC61-04690A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | BRUSH-EXIT |
| Парткод: | JC67-00563A |
| Деталь: | GEAR-EXIT |
| Парткод: | JC66-02163A |
| Деталь: | Spring-TS |
| Парткод: | 6107-002654 |
| Деталь: | ACTUATOR-F_D FULL EXIT |
| Парткод: | JC66-02217A |
| Деталь: | LEVER-ACTURATOR F_D FULL |
| Парткод: | JC66-02218A |
| Деталь: | LEVER-ACT FULL EXIT |
| Парткод: | JC66-02278A |
| Деталь: | SHAFT-ACTUATOR F_D FULL EXIT |
| Парткод: | JC66-02423A |
| Деталь: | EXIT-GUIDE UPPER |
| Парткод: | JC90-01132A |
| Деталь: | EXIT-GUIDE LOWER |
| Парткод: | JC90-01133A |
| Деталь: | DRIVE-REGI MP |
| Парткод: | JC93-00443A |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00123B |
| Цена: | 3 700 ₽ |
| Деталь: | CLUTCH-ELECTRIC |
| Парткод: | JC47-00037A |
| Деталь: | GEAR-DRIVE FEED B |
| Парткод: | JC66-03118A |
| Деталь: | GEAR-IDLE REGI |
| Парткод: | JC66-03115A |
| Деталь: | GEAR-RDCN REGI |
| Парткод: | JC66-03114A |
| Деталь: | GEAR-DRIVE REGI |
| Парткод: | JC66-03116A |
| Деталь: | GEAR-DRIVE MP |
| Парткод: | JC66-03117A |
| Деталь: | FRAME-TRAY-LOWER |
| Парткод: | JC61-04759A |
| Деталь: | FRAME-TRAY-UPPER |
| Парткод: | JC61-04758A |
| Деталь: | GUIDE-TRAY PAPER |
| Парткод: | JC61-04763A |
| Деталь: | BRACKET |
| Парткод: | JC61-04757A |
| Деталь: | GUIDE-SIDE F |
| Парткод: | JC61-04760A |
| Деталь: | GEAR-RACK |
| Парткод: | JC66-03216A |
| Деталь: | LINK-SIDE |
| Парткод: | JC66-03220A |
| Деталь: | Gear-Pinion |
| Парткод: | JG66-40003A |
| Цена: | 260 ₽ |
| Деталь: | GUIDE-SIDE R |
| Парткод: | JC61-04761A |
| Деталь: | DRIVE MAIN |
| Парткод: | JC93-00440A |
| Деталь: | Motor BLDC |
| Парткод: | JC31-00123A |
| Деталь: | HOLDER-HARNESS DRIVE |
| Парткод: | JC61-04540A |
| Деталь: | DRIVE-MOTOR STEP |
| Парткод: | JC93-00452A |
| Деталь: | DRIVE MAIN-SENSOR OPC |
| Парткод: | JC93-00506A |
| Деталь: | DRIVE-MAIN SUB COLOR |
| Парткод: | JC93-00723A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | HOLDER-SENSOR OPC |
| Парткод: | JC61-04538A |
| Деталь: | OPE |
| Парткод: | JC97-04006A |
| Деталь: | COVER |
| Парткод: | JC95-01506A |
| Деталь: | CARTRIDGE-WTB |
| Парткод: | JC96-06209A |
| Деталь: | HVPS-POLARIS HVPS |
| Парткод: | JC44-00212A |
| Деталь: | LSU |
| Парткод: | JC97-04010A |
| Деталь: | CARTRIDGE-TRANSFER ITB CLEAN |
| Парткод: | JC96-06246A |
| Цена: | 5 800 ₽ |
| Деталь: | PLATEN FR HR |
| Парткод: | JC97-04020A |
| Деталь: | DADF |
| Парткод: | JC97-03989A |
| Деталь: | FRAME-MAIN ENGINE |
| Парткод: | JC93-00433A |
| Деталь: | Exit |
| Парткод: | JC90-01118A |
| Деталь: | Fuser |
| Парткод: | JC91-01063A |
| Деталь: | CARTRIDGE-TRANSFER ITB |
| Парткод: | JC96-06245A |
| Деталь: | COVER-SIDE |
| Парткод: | JC95-01507A |
| Деталь: | SHIELD-SMPS LOWER |
| Парткод: | JC63-03415A |
| Деталь: | FDB-POLARIS / EVERGREEN_V2 |
| Парткод: | JC44-00211A |
| Деталь: | SMPS-V2 |
| Парткод: | JC44-00100C |
| Деталь: | COVER-SMPS UPPER |
| Парткод: | JC63-03421A |
| Деталь: | FAN-TYPE 6 |
| Парткод: | JC31-00160B |
| Деталь: | GUIDE-FAX |
| Парткод: | JC61-04789A |
| Деталь: | PBA-Main |
| Парткод: | JC92-02429A |
| Деталь: | SHIELD-MAIN LOWER |
| Парткод: | JC63-03414A |
| Деталь: | PBA-FAX JOINT |
| Парткод: | JC92-02439A |
| Деталь: | MEA UNIT-HOLDER HDD |
| Парткод: | JC97-02276A |
| Деталь: | CARTRIDGE SUB-DEVE Y KIT |
| Парткод: | JC96-06219A |
| Деталь: | CARTRIDGE SUB-DEVE M KIT |
| Парткод: | JC96-06220A |
| Деталь: | CARTRIDGE SUB-DEVE C KIT |
| Парткод: | JC96-06221A |
| Деталь: | CARTRIDGE SUB-DEVE K KIT |
| Парткод: | JC96-06222A |
| Цена: | 16 100 ₽ |
| Деталь: | HDD |
| Парткод: | JC59-00035A |
| Деталь: | CASSETTE-2ND |
| Парткод: | JC90-01141A |
| Деталь: | FRAME-CASSETTE 2ND |
| Парткод: | JC61-04713A |
| Деталь: | LOCKER-CASSETTE 2ND |
| Парткод: | JC64-00716A |
| Деталь: | Spring-ES |
| Парткод: | 6107-001761 |
| Деталь: | HOLDER-LOCKER |
| Парткод: | JC61-04886A |
| Деталь: | CASSETTE-COVER |
| Парткод: | JC90-01129A |
| Деталь: | CASSETTE-GUIDE FRONT |
| Парткод: | JC90-01130A |
| Деталь: | CASSETTE-GUIDE REAR |
| Парткод: | JC90-01131A |
| Деталь: | GEAR-M_PINION 24 |
| Парткод: | JC66-01020A |
| Деталь: | SCREW-TAPPING |
| Парткод: | 6002-000440 |
| Деталь: | CASSETTE-BRACKET LIFT |
| Парткод: | JC90-01128A |
| Деталь: | SHAFT-LIFTING CST |
| Парткод: | JC66-03285A |
| Деталь: | GEAR-LIFTING CST |
| Парткод: | JC66-03278A |
| Деталь: | PLATE-LEVER |
| Парткод: | JC61-03206A |
| Деталь: | GUIDE-LEFT |
| Парткод: | JC61-04718A |
| Деталь: | INDICATOR-SIZE REAR |
| Парткод: | JC64-00704A |
| Деталь: | LEVER-LINK SIZE 2ND |
| Парткод: | JC66-03201A |
| Деталь: | SCREW-TAPTYPE |
| Парткод: | 6003-000264 |
| Деталь: | INDICATOR-SIZE SIDE |
| Парткод: | JC64-00703A |
| Деталь: | PLATE-KNOCK UP |
| Парткод: | JC61-04767A |
| Деталь: | SEAL-PAD CST |
| Парткод: | JC62-00946A |
| Деталь: | ROLLER-IDLE CST |
| Парткод: | JC61-03331A |
| Деталь: | DADF OPEN-COVER |
| Парткод: | JC97-03990A |
| Деталь: | DADF FRAME-MAIN |
| Парткод: | JC97-03992A |
| Деталь: | DADF-MOTOR |
| Парткод: | JC97-03993A |
| Деталь: | DADF STACKER |
| Парткод: | JC97-03994A |
| Деталь: | DADF FRAME-MAIN |
| Парткод: | JC97-03992A |
| Деталь: | MEA-HOLDER ADF RUBBER |
| Парткод: | JC97-03097A |
| Деталь: | PAD-GUIDE_PICKUP |
| Парткод: | JC69-02810A |
| Цена: | 290 ₽ |
| Деталь: | GUIDE-PICK_UP |
| Парткод: | JC61-04583A |
| Деталь: | BRACKET-EXIT |
| Парткод: | JC61-04908A |
| Деталь: | BRUSH-ANTISTATIC |
| Парткод: | JC67-00562A |
| Деталь: | ROLLER-EXIT |
| Парткод: | JC66-03095A |
| Деталь: | ROLLER-REGI |
| Парткод: | JC66-03094A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | CLUTCH-ELECTRIC |
| Парткод: | JC47-00033A |
| Цена: | 1 200 ₽ |
| Деталь: | GEAR-EXIT |
| Парткод: | JC66-03261A |
| Деталь: | GEAR-IDLE_CLUTCH |
| Парткод: | JC66-03264A |
| Деталь: | Belt-Timing Gear |
| Парткод: | 6602-003183 |
| Деталь: | Belt-Timing Gear |
| Парткод: | 6602-003186 |
| Деталь: | GEAR-KNOB |
| Парткод: | JC66-03266A |
| Деталь: | GEAR-REDUCTION_KNOB |
| Парткод: | JC66-03267A |
| Деталь: | Actuator-Exit |
| Парткод: | JC66-03184A |
| Деталь: | ROLLER-EXIT_IDLE |
| Парткод: | JC66-03177A |
| Деталь: | HOLDER-EXIT IDLE_F |
| Парткод: | JC61-04832A |
| Деталь: | Roller-Feed |
| Парткод: | JC66-03093A |
| Деталь: | GUIDE-WHITE_BAR |
| Парткод: | JC61-04584A |
| Деталь: | DADF OPEN-COVER |
| Парткод: | JC97-03990A |
| Деталь: | Cover-Open |
| Парткод: | JC63-03273A |
| Деталь: | HANDLE-COVER_OPEN |
| Парткод: | JC64-00682A |
| Деталь: | Spring-ES |
| Парткод: | 6107-003033 |
| Деталь: | Spring-CS |
| Парткод: | 6107-003022 |
| Деталь: | Spring-TS |
| Парткод: | 6107-001737 |
| Деталь: | SPRING ETC-PICKUP |
| Парткод: | JC61-00482A |
| Деталь: | DADF GUIDE-PIKCUP |
| Парткод: | JC97-04009A |
| Цена: | 2 500 ₽ |
| Деталь: | ACTUATOR-REGI |
| Парткод: | JC66-03148A |
| Деталь: | ACTUATOR-DETECT |
| Парткод: | JC66-03147A |
| Деталь: | ROLLER-IDLE TAKE AWAY |
| Парткод: | JC66-02384A |
| Деталь: | COVER-OPEN_INNER |
| Парткод: | JC63-03274A |
| Деталь: | STOPPER-PAPER |
| Парткод: | JC61-04647A |
| Деталь: | DADF STACKER |
| Парткод: | JC97-03994A |
| Деталь: | GUIDE-DOC_R |
| Парткод: | JC61-04749A |
| Деталь: | GUIDE-STACKER_UPPER |
| Парткод: | JC61-04746A |
| Деталь: | GUIDE-DOC_F |
| Парткод: | JC61-04748A |
| Деталь: | ACTUATOR-PAPER_LENGTH |
| Парткод: | JC66-03209A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | GUIDE-GEAR_RACK_R |
| Парткод: | JC61-04751A |
| Деталь: | GUIDE-GEAR_RACK_F |
| Парткод: | JC61-04750A |
| Деталь: | PMO-GEAR PINION |
| Парткод: | JF72-41354A |
| Деталь: | GUIDE-STACKER_LOWER |
| Парткод: | JC61-04747A |
| Деталь: | GUIDE-STACKER WIRE |
| Парткод: | JC61-01438A |
| Деталь: | FRAME-MAIN REGI |
| Парткод: | JC93-00508A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001381 |
| Деталь: | SHAFT-REGI |
| Парткод: | JC66-03302A |
| Деталь: | ROLLER-REGI |
| Парткод: | JC66-03180A |
| Деталь: | GEAR-ROLLER REGI |
| Парткод: | JC66-03293A |
| Деталь: | Spring-ES |
| Парткод: | 6107-003302 |
| Деталь: | HOLDER-SHAFT REGI |
| Парткод: | JC61-04897A |
| Деталь: | BRACKET-REGI UPPER |
| Парткод: | JC61-04685A |
| Деталь: | PLATEN FR HR-CARRIAGE HR |
| Парткод: | JC97-03984A |
| Деталь: | PLATEN FR HR-CARRIAGE FR |
| Парткод: | JC97-03983A |
| Деталь: | FRAME-BASE |
| Парткод: | JC61-04674A |
| Деталь: | Spring-ES |
| Парткод: | 6107-001698 |
| Деталь: | PLATEN FR HR-STRING FRONT |
| Парткод: | JC97-03998A |
| Деталь: | PLATEN FR HR-STRING REAR |
| Парткод: | JC97-03999A |
| Деталь: | PLATEN FR HR-RAIL UPPER |
| Парткод: | JC97-03988A |
| Деталь: | PLATEN FR HR-RAIL LOWER R |
| Парткод: | JC97-03987A |
| Деталь: | PLATEN FR HR-RAIL LOWER F |
| Парткод: | JC97-03986A |
| Деталь: | HOLDER-CABLE |
| Парткод: | JC61-04572A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | PULLEY-DRIVING |
| Парткод: | JC66-03242A |
| Деталь: | HANDLE-SOCKET SET SCREW |
| Парткод: | JC64-00508A |
| Деталь: | SHAFT-DRIVING |
| Парткод: | JC66-03186A |
| Деталь: | PULLEY-BELT |
| Парткод: | JC66-02257A |
| Деталь: | FLAT CABLE-CCD IF |
| Парткод: | JC39-01673A |
| Деталь: | FOOT-SF4000 |
| Парткод: | JG61-40001A |
| Деталь: | Belt-Timing Gear |
| Парткод: | 6602-001725 |
| Деталь: | BRACKET-SUPPORT |
| Парткод: | JC61-04629A |
| Деталь: | MOTOR STEP |
| Парткод: | JC31-00158A |
| Деталь: | BRACKET-MOTOR |
| Парткод: | JC61-04630A |
| Деталь: | MP-TRAY |
| Парткод: | JC90-01117A |
| Деталь: | COVER-FRONT MP |
| Парткод: | JC63-03356A |
| Деталь: | COVER-SIDE |
| Парткод: | JC63-03376A |
| Деталь: | COVER-SIDE GUIDE FEED |
| Парткод: | JC95-01513A |
| Деталь: | GUIDE-DUPLEX UPPER |
| Парткод: | JC61-04795A |
| Деталь: | COVER-SIDE EXIT |
| Парткод: | JC95-01509A |
| Деталь: | BRACKET-SUPPORT UPPER |
| Парткод: | JC61-04678A |
| Деталь: | HANDLE-SIDE |
| Парткод: | JC64-00712A |
| Деталь: | ROLLER-DUPLEX |
| Парткод: | JC66-03179A |
| Деталь: | BRACKET-FRONT SIDE |
| Парткод: | JC61-04682A |
| Деталь: | LOCKER-SIDE |
| Парткод: | JC64-00710A |
| Деталь: | LINK-D |
| Парткод: | JC66-03235A |
| Деталь: | Belt-Timing Gear |
| Парткод: | 6602-003299 |
| Деталь: | COVER-SIDE FEED DUPLEX |
| Парткод: | JC95-01517A |
| Деталь: | MP |
| Парткод: | JC90-01139A |
| Деталь: | COVER-SIDE TAKE AWAY |
| Парткод: | JC95-01516A |
| Деталь: | COVER-HARNESS LOWER |
| Парткод: | JC63-03379A |
| Деталь: | COVER-HARNESS |
| Парткод: | JC63-03378A |
| Деталь: | BRACKET-REAR SIDE |
| Парткод: | JC61-04681A |
| Деталь: | COVER-SIDE LINK REAR |
| Парткод: | JC95-01518A |
| Деталь: | Spring-TS |
| Парткод: | 6107-003052 |
| Деталь: | BRACKET-LINK SUPPORT |
| Парткод: | JC61-04684A |
| Деталь: | GUIDE-HARNESS |
| Парткод: | JC61-04872A |
| Деталь: | COVER-SIDE DUPLEX MOTOR |
| Парткод: | JC95-01510A |
| Деталь: | LOCKER-SIDE REAR |
| Парткод: | JC64-00711A |
| Деталь: | SHAFT-HANDLE |
| Парткод: | JC66-03301A |
| Деталь: | GEAR-EXIT |
| Парткод: | JC66-03292A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001731 |
| Деталь: | FRAME MAIN-PICKUP |
| Парткод: | JC93-00510A |
| Деталь: | FRAME-MAIN PICK UP ROLLER |
| Парткод: | JC93-00540A |
| Цена: | 700 ₽ |
| Деталь: | FRAME MAIN-PICKUP UPPER |
| Парткод: | JC93-00504A |
| Деталь: | BRACKET-PICKUP REAR |
| Парткод: | JC61-04731A |
| Деталь: | BRACKET-PICKUP FRONT |
| Парткод: | JC61-04730A |
| Деталь: | GEAR-PICKUP |
| Парткод: | JC66-03281A |
| Деталь: | SHAFT-FORWARD |
| Парткод: | JC66-03304A |
| Деталь: | FRAME MAIN-PICKUP LOWER |
| Парткод: | JC93-00503A |
| Деталь: | LEVER-INPUT CST |
| Парткод: | JC66-03200A |
| Деталь: | HOLDER-RETARD |
| Парткод: | JC61-04732A |
| Деталь: | SHAFT-RETARD |
| Парткод: | JC66-03283A |
| Деталь: | COUPLER-TORQUELIMITER |
| Парткод: | JC67-00455A |
| Деталь: | FRAME MAIN-PICKUP BRKT LOWER |
| Парткод: | JC93-00438A |
| Деталь: | Spring-CS |
| Парткод: | 6107-003049 |
| Деталь: | FIXER-M_E RING 4PI |
| Парткод: | JC61-01367A |
| Деталь: | Fuser |
| Парткод: | JC91-01063A |
| Деталь: | CAM-REAR |
| Парткод: | JC66-03299A |
| Деталь: | HOLDER-ENCORDER PRESSURE |
| Парткод: | JC61-04527A |
| Деталь: | SHAFT-CAM |
| Парткод: | JC66-03161A |
| Деталь: | FUSER-BIAS |
| Парткод: | JC91-01056A |
| Деталь: | FILM-FUSER REAR |
| Парткод: | JC01-00075A |
| Деталь: | FILM-FUSER FRONT |
| Парткод: | JC01-00074A |
| Деталь: | BRACKET-FUSER BOTTOM |
| Парткод: | JC61-04552A |
| Деталь: | BRACKET-INLET GUIDE |
| Парткод: | JC61-04546A |
| Деталь: | Shaft-Pressure |
| Парткод: | JC66-03162A |
| Деталь: | FRAME-FUSER REAR |
| Парткод: | JC61-04532A |
| Деталь: | FRAME-FUSER FRONT |
| Парткод: | JC61-04531A |
| Деталь: | GEAR-IDLE FUSER |
| Парткод: | JC66-03145A |
| Деталь: | BRUSH-FUSER OUTPUT |
| Парткод: | JC67-00554A |
| Деталь: | BRACKET-FUSER BACK |
| Парткод: | JC61-04557A |
| Деталь: | Roller-Pressure |
| Парткод: | JC66-03258A |
| Деталь: | Bearing-Ball |
| Парткод: | 6601-002683 |
| Деталь: | Ring-E |
| Парткод: | 6044-000129 |
| Деталь: | Spring-CS |
| Парткод: | 6107-003007 |
| Деталь: | GEAR-PR |
| Парткод: | JC66-03144A |
| Деталь: | GEAR-FUSER PRESSURE |
| Парткод: | JC66-03143A |
| Деталь: | FUSER-BRACKET BELT |
| Парткод: | JC91-01060A |
| Деталь: | FUSER-BELT |
| Парткод: | JC91-01061A |
| Деталь: | FUSER-BRACKET REAR |
| Парткод: | JC91-01058A |
| Деталь: | FUSER-BRACKET FRONT |
| Парткод: | JC91-01057A |
| Деталь: | FUSER-BRACKET TOP |
| Парткод: | JC91-01059A |
| Деталь: | FUSER-GUIDE DUPLEX |
| Парткод: | JC91-01055A |
| Деталь: | COVER-SIDE GUIDE FEED |
| Парткод: | JC95-01513A |
| Деталь: | GUIDE-FEED |
| Парткод: | JC61-04796A |
| Деталь: | Spring-CS |
| Парткод: | 6107-001731 |
| Деталь: | HOLDER-ROLLER IDLE |
| Парткод: | JC61-03098A |
| Деталь: | SHAFT-ROLLER IDLE L |
| Парткод: | JC66-02354A |
| Деталь: | ROLLER-IDLE |
| Парткод: | JC66-02289B |
| Деталь: | Spring-CS |
| Парткод: | 6107-003048 |
| Деталь: | ARM-TR FRONT |
| Парткод: | JC66-03294A |
| Деталь: | ACTUATOR-DUPLEX 2 |
| Парткод: | JC66-02180A |
| Деталь: | Spring-TS |
| Парткод: | 6107-001737 |
| Деталь: | LABEL-INFORMATION |
| Парткод: | JC68-02483A |
| Деталь: | PLATE-GROUND_SAW_B |
| Парткод: | JC61-03580A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | HOLDER-ACT FUSER IN |
| Парткод: | JC61-04895A |
| Деталь: | ACTUATOR-FUSER IN |
| Парткод: | JC66-03234A |
| Деталь: | Spring-TS |
| Парткод: | 6107-001735 |
| Деталь: | GUIDE-T2 UPPER |
| Парткод: | JC61-04797A |
| Деталь: | GUIDE-T2 LOWER |
| Парткод: | JC61-04798A |
| Деталь: | Spring-TS |
| Парткод: | 6107-003054 |
| Деталь: | COVER-SIDE ROLLER T2 |
| Парткод: | JC95-01514A |
| Деталь: | ARM-TR REAR |
| Парткод: | JC66-03295A |
| Деталь: | OPE |
| Парткод: | JC97-04006A |
| Деталь: | COVER-FRONT DUMMY OPE |
| Парткод: | JC63-03409A |
| Деталь: | OPE-FRONT |
| Парткод: | JC97-04007A |
| Деталь: | COVER-BOTTOM OPE |
| Парткод: | JC63-03408A |
| Деталь: | BRACKET-SUPPORT |
| Парткод: | JC61-04567A |
| Деталь: | COVER-FRONT OPE |
| Парткод: | JC63-03407A |
| Деталь: | LCD |
| Парткод: | JC07-00021A |
| Деталь: | KEY-JOB STATUS |
| Парткод: | JC64-00683A |
| Деталь: | LENS-ECO |
| Парткод: | JC67-00586A |
| Деталь: | KEY-POWER |
| Парткод: | JC64-00691A |
| Деталь: | KEY-STOP |
| Парткод: | JC64-00685A |
| Деталь: | KEY-START |
| Парткод: | JC64-00686A |
| Деталь: | KEY-M TEL |
| Парткод: | JC64-00684A |
| Деталь: | BRACKET-LCD |
| Парткод: | JC61-04561A |
| Деталь: | GROUND-TOUCH |
| Парткод: | JC63-03310A |
| Деталь: | FLAT CABLE-KEY |
| Парткод: | JC39-01575A |
| Деталь: | LENS-STATUS |
| Парткод: | JC67-00560A |
| Деталь: | PBA-OPE |
| Парткод: | JC92-02436A |
| Деталь: | Cover-Front |
| Парткод: | JC95-01496A |
| Деталь: | COVER-FRONT LOWER |
| Парткод: | JC63-03405A |
| Деталь: | COVER-INNER |
| Парткод: | JC95-01498A |
| Деталь: | COVER-FRONT TOP DECO |
| Парткод: | JC63-03404A |
| Деталь: | COVER-FRONT TOP |
| Парткод: | JC63-03403A |
| Деталь: | COVER-LEFT |
| Парткод: | JC95-01497A |
| Деталь: | COVER-SCAN LEFT |
| Парткод: | JC63-03396A |
| Деталь: | COVER-SCAN FRONT |
| Парткод: | JC95-01502A |
| Деталь: | COVER-LEFT UPPER |
| Парткод: | JC63-03406A |
| Деталь: | COVER-EXIT REAR |
| Парткод: | JC63-03389A |
| Деталь: | COVER-EXIT |
| Парткод: | JC95-01499A |
| Деталь: | COVER-SCAN RIGHT |
| Парткод: | JC95-01503A |
| Деталь: | COVER-EXIT DUMMY |
| Парткод: | JC63-03391A |
| Деталь: | COVER-RIGHT TOP |
| Парткод: | JC63-03402A |
| Деталь: | COVER-RIGHT INNER COLOR |
| Парткод: | JC63-03400A |
| Деталь: | COVER-RIGHT HANDLE |
| Парткод: | JC63-03398A |
| Деталь: | COVER-RIGHT LOWER |
| Парткод: | JC95-01501A |
| Деталь: | COVER-RIGHT COLOR |
| Парткод: | JC63-03401A |
| Деталь: | BRACKET-COVER REAR COLOR |
| Парткод: | JC61-04560A |
| Деталь: | COVER-SCAN REAR |
| Парткод: | JC63-03332A |
| Деталь: | COVER-CONNECTOR DADF |
| Парткод: | JC63-03333A |
| Деталь: | FRAME-BASE MP |
| Парткод: | JC61-04764A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | SHEET-STOPPER |
| Парткод: | JC63-03359A |
| Деталь: | PAD-MP |
| Парткод: | JC69-02047A |
| Деталь: | SHEET-GUIDE MP |
| Парткод: | JC63-03358A |
| Деталь: | BRACKET |
| Парткод: | JC61-04755A |
| Деталь: | SHAFT-RETARD MP |
| Парткод: | JC66-03223A |
| Деталь: | PIN-SPRING |
| Парткод: | 6043-001097 |
| Деталь: | SHAFT-HUB IN |
| Парткод: | JC66-00591A |
| Деталь: | BUSH-RETARD MP |
| Парткод: | JC61-04765A |
| Деталь: | Spring-CS |
| Парткод: | 6107-003032 |
| Деталь: | COUPLER-TORQUELIMITER |
| Парткод: | JC67-00455A |
| Деталь: | PLATEN FR HR-UPPER |
| Парткод: | JC97-04002A |
| Деталь: | PLATEN FR HR-LOWER |
| Парткод: | JC97-03985A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001453 |
| Деталь: | HOLDER-APS |
| Парткод: | JC61-04569A |
| Деталь: | PLATE-ALIGN COVER |
| Парткод: | JC61-04638A |
| Деталь: | COVER-GLASS |
| Парткод: | JC63-03296A |
| Деталь: | GLASS-SCAN |
| Парткод: | JC01-00072A |
| Деталь: | GUIDE-PAPER V |
| Парткод: | JC61-04814A |
| Деталь: | GLASS-SCAN ADF |
| Парткод: | JC01-00073A |
| Деталь: | GUIDE-ADF-PATH |
| Парткод: | JC61-04811A |
| Деталь: | Guide-Paper H |
| Парткод: | JC61-04815A |
| Деталь: | SPONGE-GUIDE ADF |
| Парткод: | JC63-03315A |
| Деталь: | DADF-MOTOR |
| Парткод: | JC97-03993A |
| Деталь: | MOTOR BLDC-TYPE1 |
| Парткод: | JC31-00156A |
| Деталь: | SOLENOID-PICK UP |
| Парткод: | JC33-00007A |
| Деталь: | HOLDER-HARNESS |
| Парткод: | JC61-04534A |
| Деталь: | BUSH-EXIT |
| Парткод: | JC61-00699B |
| Деталь: | BRACKET-MOTOR |
| Парткод: | JC61-04627A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | CLUTCH-ELECTRIC |
| Парткод: | JC47-00033A |
| Цена: | 1 200 ₽ |
| Деталь: | GEAR-CAM_OUTER |
| Парткод: | JC66-03260A |
| Деталь: | GEAR-PICKUP_IDLE |
| Парткод: | JC66-03265A |
| Деталь: | GEAR-REDUCTION |
| Парткод: | JC66-03263A |
| Деталь: | GEAR-CAM_INNER |
| Парткод: | JC66-03259A |
| Деталь: | GEAR-EXIT_IDLE |
| Парткод: | JC66-03262A |
| Деталь: | Spring-ES |
| Парткод: | 6107-003036 |
| Деталь: | DADF PLATEN |
| Парткод: | JC97-03997A |
| Деталь: | DADF-SUB |
| Парткод: | JC97-03991A |
| Деталь: | DADF-HINGE L |
| Парткод: | JC97-03995A |
| Деталь: | DADF-HINGE R |
| Парткод: | JC97-03996A |
| Деталь: | COVER-SIDE_F |
| Парткод: | JC63-03345A |
| Деталь: | COVER-DECO_R |
| Парткод: | JC63-03354A |
| Деталь: | COVER-SIDE_R |
| Парткод: | JC63-03346A |
| Деталь: | COVER-DECO_F |
| Парткод: | JC63-03353A |
| Деталь: | PBA-ADF |
| Парткод: | JC92-02446A |
| Деталь: | FRAME MAIN-FRONT |
| Парткод: | JC93-00475A |
| Деталь: | FRAME MAIN-REAR |
| Парткод: | JC93-00476A |
| Деталь: | FRAME MAIN-MIDDLE ACR |
| Парткод: | JC93-00482A |
| Деталь: | FRAME MAIN-SUPPORT FUSER |
| Парткод: | JC93-00481A |
| Деталь: | FRAME BASE-BOTTOM |
| Парткод: | JC93-00468A |
| Деталь: | FRAME MAIN-WTB SENSOR |
| Парткод: | JC93-00492A |
| Деталь: | SPEAKER |
| Парткод: | 3001-002207 |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | SENSOR-PAPER_SIZE |
| Парткод: | JC32-00013A |
| Деталь: | FRAME MAIN-HUMIDITY SENSOR |
| Парткод: | JC93-00486A |
| Деталь: | FRAME MAIN-REAR DRAW TONER |
| Парткод: | JC93-00016A |
| Деталь: | FRAME MAIN-SWITCH OPEN |
| Парткод: | JC93-00466A |
| Деталь: | HARNESS-DCF IF SET |
| Парткод: | JC39-01686A |
| Деталь: | COVER-SIDE EXIT |
| Парткод: | JC95-01509A |
| Деталь: | GUIDE-SIDE EXIT |
| Парткод: | JC61-04791A |
| Деталь: | PHOTO-INTERRUPTER |
| Парткод: | 0604-001393 |
| Деталь: | ACTUATOR-FUSER OUT |
| Парткод: | JC66-03307A |
| Деталь: | Spring-TS |
| Парткод: | 6107-001737 |
| Деталь: | Spring-TS |
| Парткод: | 6107-003055 |
| Деталь: | GUIDE-GATE |
| Парткод: | JC61-04792A |
| Деталь: | HOLDER-EXIT-SENSOR |
| Парткод: | JC61-04892A |
| Деталь: | Solenoid-MP |
| Парткод: | JC33-00029B |
| Деталь: | GUIDE-UPPER PU MP |
| Парткод: | JC61-04876A |
| Деталь: | Spring-ES |
| Парткод: | 6107-003031 |
| Деталь: | Spring-ES |
| Парткод: | 6107-003026 |
| Деталь: | LEVER-SOLENOID |
| Парткод: | JC66-03218A |
| Деталь: | MP-BRACKET UPPER |
| Парткод: | JC90-01127A |
| Деталь: | Shaft-Pick Up MP |
| Парткод: | JC66-03222A |
| Деталь: | LOCKER-STOPPER |
| Парткод: | JC64-00705A |
| Деталь: | GEAR-M_IDLE PU |
| Парткод: | JC66-00940A |
| Деталь: | SHAFT-FORWARD MP |
| Парткод: | JC66-03303A |
| Деталь: | GEAR-M PU |
| Парткод: | JC66-03213A |
| Деталь: | STOPPER-PAPER |
| Парткод: | JC61-04766A |
| Деталь: | JOINT-PU |
| Парткод: | JC66-03221A |
| Деталь: | ROLLER-IDLE FORWARD |
| Парткод: | JC61-03332A |
| Деталь: | MP-ONE WAY |
| Парткод: | JC90-00918A |
| Деталь: | LEVER-HOOK |
| Парткод: | JC66-03219A |
| Деталь: | CLUTCH-P_ONE WAY |
| Парткод: | JC66-00977A |
| Деталь: | HOLDER-M_IDLE ONE WAY |
| Парткод: | JC61-01288A |
| Деталь: | FRAME MAIN-PICKUP 1ST |
| Парткод: | JC93-00511A |
| Деталь: | FRAME MAIN-PICKUP 2ND |
| Парткод: | JC93-00512A |
| Деталь: | SHEET-GUIDE PICKUP |
| Парткод: | JC63-03342A |
| Деталь: | GUIDE-PICKUP 1ST |
| Парткод: | JC61-04721A |
| Деталь: | GUIDE-HARNESS PICKUP |
| Парткод: | JC61-04723A |
| Деталь: | FRAME MAIN-PICKUP |
| Парткод: | JC93-00510A |
| Деталь: | GUIDE-PICKUP BOTTOM |
| Парткод: | JC61-04735A |
| Деталь: | GUIDE-PICKUP 2ND |
| Парткод: | JC61-04717A |
Коды ошибок
A1-1111, A1-1113
A1-1211, A1-1213
A1-1611, A1-1612, A1-1613
A1-2211, A1-2212, A1-2213
A1-2311, A1-2312, A1-2313
A1-2411, A1-2412, A1-2413
A1-2511, A1-2512, A1-2513
A1-4310
A1-5212, A1-5213
A1-5312, A1-5313
A1-5412, A1-5413
A1-5512, A1-5513
A2-1211, A2-1212, A2-2310, A2-2311
A3-2113
A3-3111, A3-3112, A3-3113, A3-3114
A3-3210, A3-3211, A3-3212
A3-3310, A3-3311, A3-3312, A3-3410, A3-3411, A3-3412
C1-2110
C1-2120, C1-2130, C1-2140
C1-2311
C1-2411
C1-2512
C1-3110
C1-3120, C1-3130, C1-3140
C1-3311
C1-3411
C1-3512
C1-4110
C1-4120, C1-4130, C1-4140
C1-4311
C1-4411
C1-4512
C1-5110
C1-5120, C1-5130, C1-5140
C1-5311
C1-5411
C1-5512
C3-2110
C3-2130, C3-2140
C3-2411
C3-2512
C3-3110
C3-3130, C3-3140
C3-3411
C3-3512
C3-4110
C3-4130, C3-4140
C3-4411
C3-4512
C3-5110
C3-5130, C3-5140
C3-5411
C3-5512
C5-1110, C5-1120
C6-1310
C7-1110, C7-1130
C7-1311
C8-2210, C8-2310
C8-3210, C8-3310
C8-4210, C8-4310
C8-5210, C8-5310
C9-2110, C9-2120
C9-2220, C9-2120
H1-1311, H1-1312, H1-1313, H1-1314, H1-1315, H1-1317, H1-1318
H1-1322
H1-1351, H1-1352
H1-1353
H1-1411, H1-1412, H1-1417, H1-1418
H1-1422
H1-1451, H1-1452
H1-1453
H1-5323
H1-5330
H2-6700, H2-6701, H2-6702, H2-6703, H2-6704, H2-6705
H2-6706
H2-6707 ... H2-6725
H2-6726, H2-6727
H2-6728, H2-6729, H2-6730, H2-6731
H2-6732, H2-6733
H2-6734
H2-6735
H2-6736 ... H2-6743
H2-6744
H2-6A50
H2-6A63
M1-1113, M2-1121
M1-1213, M2-1131
M1-1610
M1-3122
M1-3222
M1-4111
M1-4211
M1-5111, M1-5112
M1-5211, M1-5212
M1-5612
M2-1124, M2-1125
M2-1134, M2-1135
M2-1211, M2-1213, M2-1214
M2-1331, M2-1333, M2-1334, M2-2111, M2-2113, M2-2114
M3-1411
M3-1413, M3-1414
M3-2230, M3-2430
S1-1113
S1-1313
S1-1411, S1-1413
S1-2111
S1-2411, S1-2421, S1-2422
S1-2433, S1-2443, S1-2444, S1-2445, S1-2446, S1-2447, S1-2448, S1-2449
S1-2434, S1-2435, S1-2436, S1-2437, S1-2438, S1-2439
S1-2510, S1-2511
S1-4111
S1-4311
S1-5521
S2-3114
S2-4210
S2-4410
S3-3111, S3-3211
S3-3121
S5-3111
S6-3122
S6-3123, S6-3128
S7-2110
U1-2113, U1-2119
U1-2115
U1-2132, U1-2135
U1-2141, U1-2142
U1-2316, U1-2317
U1-2335, U1-233A
U1-2337, U1-233D
U2-6121, U2-6122, U2-6123
U2-6142, U2-6143
U3-3211, U3-3213, U3-3214, U3-3311, U3-3313, U3-3314
U3-3411, U3-3413, U3-3414
U3-3511, U3-3513, U3-3514
U3-3711, U3-3713, U3-3714
U3-4210
Описание
| Error code: | A1-1111, A1-1113 |
| Display: | Motor Failure: #A1-1111. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-1111. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists. |
| Causes: | Regi/MP motor operation is abnormal. • A1–1111 : Regi/MP motor is stopped but machine recognizes it as operational. • A1–1113 : Regi/MP motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around Regi./MP unit. 3) Remove the rear cover. 4) Check if the Regi/MP motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0000) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-1211, A1-1213 |
| Display: | Motor Failure: #A1-1211. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1213. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-1211. Turn off then on. Call for service if the problem persists Motor Failure: #A1-1213. Turn off then on. Call for service if the problem persists |
| Causes: | Fuser motor operation is abnormal. • A1–1211 : Fuser motor is stopped but machine recognizes it as operational. • A1–1213 : Fuser motor is operating but recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around fuser unit. 3) Remove the rear cover. 4) Check if the fuser motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0120) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-1611, A1-1612, A1-1613 |
| Display: | Motor Failure: #A1-1611. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1612. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1613. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-1611. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1612. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1613. Turn off then on. Call for service if the problem persists. |
| Causes: | ITB motor operation is abnormal • A1–1611 : ITB motor is stopped but machine recognizes it as operational. • A1–1612 : ITB motor is not operated for print-job. • A1–1613 : ITB motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Remove the ITB unit 4) Check if the ITB motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0450) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2211, A1-2212, A1-2213 |
| Display: | Motor Failure: #A1-2211. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2212. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2213. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-2211. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2212. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2213. Turn off then on. Call for service if the problem persists |
| Causes: | Yellow OPC motor operation is abnormal. • A1–2211 : Yellow OPC motor is stopped but machine recognizes it as operational. • A1–2212 : Yellow OPC motor is not operated for print-job. • A1–2213 : Yellow OPC motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around yellow drum drive unit. 3) Remove the rear cover. 4) Check if the yellow OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select the yellow OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0041) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2311, A1-2312, A1-2313 |
| Display: | Motor Failure: #A1-2311. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2312. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2313. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-2311. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2312. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2313. Turn off then on. Call for service if the problem persists |
| Causes: | Magenta OPC motor operation is abnormal. • A1–2311 : Magenta OPC motor is stopped but machine recognizes it as operational. • A1–2312 : Magenta OPC motor is not operated for print-job. • A1–2313 : Magenta OPC motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around magenta drum drive unit. 3) Remove the rear cover. 4) Check if the magenta OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select the magenta OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0042) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2411, A1-2412, A1-2413 |
| Display: | Motor Failure: #A1-2411. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2412. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2413. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-2411. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2412. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2413. Turn off then on. Call for service if the problem persists |
| Causes: | Cyan OPC motor operation is abnormal. • A1–2411 : Cyan OPC motor is stopped but machine recognizes it as operational. • A1–2412 : Cyan OPC motor is not operated for print-job. • A1–2413 : Cyan OPC motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around cyan drum drive unit. 3) Remove the rear cover. 4) Check if the cyan OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select the cyan OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0043) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2511, A1-2512, A1-2513 |
| Display: | Motor Failure: #A1-2511. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2512. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2513. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-2511. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2512. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2513. Turn off then on. Call for service if the problem persists |
| Causes: | Black OPC motor operation is abnormal. • A1–2511 : Black OPC motor is stopped but machine recognizes it as operational. • A1–2512 : Black OPC motor is not operated for print-job. • A1–2513 : Black OPC motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around black drum drive unit. 3) Remove the rear cover. 4) Check if the black OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select the black OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0044) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-4310 |
| Display: | Motor Failure: #A1-4310. Turn off then on. Call for service if the problem persists |
| Description: | Actuator Motor Failure : #A1-4310. Call for service if the problem persists. |
| Causes: | The motor for ITB unit does not operate normally. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the right cover. 3) Check if the connection between main board and the main drive unit are correct. 4) If the connection is OK, replace the main drive unit. 5) If the problem persists, replace the main board. |
| Error code: | A1-5212, A1-5213 |
| Display: | Motor Failure: #A1-5212. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5213. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-5212. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5213. Turn off then on. Call for service if the problem persists |
| Causes: | Yellow toner is not supplied normally. • A1–5212 : Toner supply is stopped during operation. • A1–5213 : Toner is not supplied. |
| Remedy: | 1) Open the front cover. If the yellow toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 3) Enter SVC mode. Select the yellow toner supply motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 111-0000 : Toner Dispense Motor Yellow 4) If the motor is not operational, measure the yellow motor power with DVM. a) If 24V power is generated, replace the yellow toner supply motor(JC93-00446A). b) If 24V power is not generated, • Measure the 24V power on the SMPS board. If the SMPS board(JC44-00100C (220V) / JC44-00093C (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02742A). |
| Error code: | A1-5312, A1-5313 |
| Display: | Motor Failure: #A1-5312. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5313. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-5312. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5313. Turn off then on. Call for service if the problem persists |
| Causes: | Magenta toner is not supplied normally. • A1–5312 : Toner supply is stopped during operation. • A1–5313 : Toner is not supplied. |
| Remedy: | 1) Open the front cover. If the magenta toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 4) If the motor is not operational, measure the magenta motor power with DVM. a) If 24V power is generated, replace the magenta toner supply motor(JC93-00446A). b) If 24V power is not generated, • Measure the 24V power on the SMPS board. If the SMPS board(JC44-00100C (220V) / JC44-00093C (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02742A). |
| Error code: | A1-5412, A1-5413 |
| Display: | Motor Failure: #A1-5412. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5413. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-5412. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5413. Turn off then on. Call for service if the problem persists |
| Causes: | Cyan toner is not supplied normally. • A1–5412 : Toner supply is stopped during operation. • A1–5413 : Toner is not supplied. |
| Remedy: | 1) Open the front cover. If the cyan toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 3) Enter SVC mode. Select the cyan toner supply motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 111-0020 : Toner Dispense Motor Cyan 4) If the motor is not operational, measure the cyan motor power with DVM. a) If 24V power is generated, replace the cyan toner supply motor(JC93-00446A). b) If 24V power is not generated, • Measure the 24V power on the SMPS board. If the SMPS board(JC44-00100C (220V) / JC44-00093C (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02742A). |
| Error code: | A1-5512, A1-5513 |
| Display: | Motor Failure: #A1-5512. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5513. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-5512. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5513. Turn off then on. Call for service if the problem persists |
| Causes: | Black toner is not supplied normally. • A1–5212 : Toner supply is stopped during operation. • A1–5213 : Toner is not supplied. |
| Remedy: | 1) Open the front cover. If the black toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 3) Enter SVC mode. Select the black toner supply motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 111-0030 : Toner Dispense Motor Black 4) If the motor is not operational, measure the black motor power with DVM. a) If 24V power is generated, replace the black toner supply motor(JC93-00446A). b) If 24V power is not generated, Measure the 24V power on the SMPS board. If the SMPS board(JC44-00100C (220V) / JC44-00093C (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02742A). |
| Error code: | A2-1211, A2-1212, A2-2310, A2-2311 |
| Display: | Fan Failure: #. Turn off then on. Call for service if the problem persists |
| Description: | SMPS or Fuser fan is not operational. |
| Remedy: | NOTE • SMPS fan error : A2-1211 / A2-1212 • Fuser fan error : A2-2310 / A2-2311 1) Turn the machine off. 2) Remove the rear cover. 3) Check if the corresponding fan connector is connected correctly. 4) If the connection is OK, Enter SVC mode and execute fan test. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 100-0260 : SMPS Fan Run • 109-0040 : Fuser Fan Run 5) If the fan is not operational, measure the fan power. (Red line) a) If 24V power is generated, replace the defective fan. • Fuser Fan : JC31-00161A • SMPS Fan : JC31-00160B b) If 24V power is not generated, • Measure the 24V power on the SMPS board. If the SMPS board(JC44-00100A (220V) / JC44-00093A (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02429A). 6) If the fan operation is normal but the error persists, a) Check the yellow line signal with DVM. b) Check fan operation as connected or disconnected. • If the Lock signal is 0V continually, check the harness. If the harness is OK, replace the main board. • If the signal value is different from the table above, replace the fan. |
| Error code: | A3-2113 |
| Display: | The CTD sensor is dirty. Please clean it with soft cloth or paper(A3-2113) |
| Description: | The CTD sensor is dirty. Please clean it with soft cloth or paper. |
| Causes: | CTD sensor is defective or CTD sensor calibration is abnormal. |
| Remedy: | 1) Turn the machine off. 2) Open the side cover. 3) Check if the CTD sensor window is contaminated. If yes, clean the window with soft cloth. 4) Close the side cover. 5) Turn the machine on. 6) If the problem persists, replace the CTD sensor (JC32-00014A). |
| Error code: | A3-3111, A3-3112, A3-3113, A3-3114 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | The NC sensor in the fuser unit is defective. / The sensor signal is abnormal due to adefective harness. |
| Remedy: | 1) Enter the SVC mode. Execute the sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines >) - 109-0000 : Fuser Temperature A - 109-0010 : Fuser Temperature B 2) Remove and disassemble the fuser unit. 3) Measure the resistance value of the Thermistor (1404-001453). If the measured value is out of 307KOm - 430KOm at 25C, replace the thermistor. 4) If the error persists, replace the Fuser unit (JC91-01049A(220V) / JC91-01050A (110V)). 5) If the error persists after replacing fuser unit, replace the Main board(JC92-02452A). |
| Error code: | A3-3210, A3-3211, A3-3212 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | Sensor Failure: #A3-3210. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3211. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3212. Turn off then on. Call for service if the problem persists |
| Causes: | Inner temperature sensor is defective. • A3–3210 : Inner temperature sensor value is abnormal. • A3–3211 : Inner temperature sensor is in short status. • A3–3212 : Inner temperature sensor is in open status. |
| Remedy: | 1) Open the side cover. Check the connection. • If the connection is OK, replace the photo sensor (1404-001417). 2) If the sensor is normal, replace the main board(JC92-02742A). |
| Error code: | A3-3310, A3-3311, A3-3312, A3-3410, A3-3411, A3-3412 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | External temperature sensor is defective. / Humidity sensor is defective. |
| Remedy: | • A3-3310, A3-3311, A3-3312 : External temperature sensor • A3-3410, A3-3411, A3-3412 : Humidity sensor 1) Turn the machine off. 2) Enter SVC mode. Execute sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines > 109-0013) 3) Open the side cover. Measure the resistance value of the connector at both ends. - If the values is not in 10Kom +- 1% (at 25C), replace the Photo sensor (JC93.00486A). 4) If the sensor is normal, replace the Main board(JC92-02452A). |
| Error code: | C1-2110 |
| Display: | Prepare new yellow toner cartridge. |
| Description: | Prepare new yellow toner cartridge. |
| Causes: | Yellow toner is almost empty. |
| Remedy: | 1) Order new yellow toner cartridge because toner cartridge with level of “Low” will be exhausted soon. |
| Error code: | C1-2120, C1-2130, C1-2140 |
| Display: | Replace with new yellow toner cartridge End of life, Replace with new yellow toner cartridge |
| Description: | Replace with new yellow toner cartridge End of life, Replace with new yellow toner cartridge |
| Causes: | The yellow toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the yellow toner cartridge. 3) Install the new yellow toner cartridge. 4) Close the front cover. |
| Error code: | C1-2311 |
| Display: | Yellow Toner Cartridge Failure: #C1-2311. Install yellow toner cartridge again |
| Description: | Yellow Toner Cartridge Failure: #C1-2311. Install yellow toner cartridge again |
| Causes: | Yellow toner supply is inefficient or abnormal. |
| Remedy: | 1) Open the front cover. 2) Remove the yellow toner cartridge. Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 3) Check if the toner supply pipe is blocked. If it is closed, open it. 4) Close the front cover. |
| Error code: | C1-2411 |
| Display: | Yellow toner cartridge is not installed. Install it. |
| Description: | The yellow toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the yellow toner cartridge is installed. 2) Remove and reinstall the yellow toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the yellow toner cartridge(CLT-Y809S) with a new one. |
| Error code: | C1-2512 |
| Display: | Yellow toner cartridge is not compatible. Check users guide. |
| Description: | Yellow toner cartridge is not compatible. Check users guide. |
| Causes: | Yellow toner cartridge is not compatible. |
| Remedy: | 1) Replace the yellow toner cartridge with a new one. |
| Error code: | C1-3110 |
| Display: | Prepare new magenta toner cartridge. |
| Description: | Prepare new magenta toner cartridge. |
| Causes: | Magenta toner is almost empty. |
| Remedy: | 1) Order new magenta toner cartridge because toner cartridge with level of “Low” will be exhausted soon. |
| Error code: | C1-3120, C1-3130, C1-3140 |
| Display: | Replace with new magenta toner cartridge End of life, Replace with new magenta toner cartridge |
| Description: | Replace with new magenta toner cartridge End of life, Replace with new magenta toner cartridge |
| Causes: | The magenta toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the magenta toner cartridge. 3) Install the new magenta toner cartridge. 4) Close the front cover. |
| Error code: | C1-3311 |
| Display: | Magenta Toner Cartridge Failure: #C1-3311. Install magenta toner cartridge again |
| Description: | Magenta Toner Cartridge Failure: #C1-3311. Install magenta toner cartridge again |
| Causes: | Magenta toner supply is inefficient or abnormal. |
| Remedy: | 1) Open the front cover. 2) Remove the magenta toner cartridge. Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 3) Check if the toner supply pipe is blocked. If it is closed, open it. 4) Close the front cover. |
| Error code: | C1-3411 |
| Display: | Magenta toner cartridge is not installed. Install it. |
| Description: | The magenta toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the magenta toner cartridge is installed. 2) Remove and reinstall the magenta toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the magenta toner cartridge(CLT-M809S) with a new one. |
| Error code: | C1-3512 |
| Display: | Magenta toner cartridge is not compatible. Check users guide. |
| Description: | Magenta toner cartridge is not compatible. Check users guide. |
| Causes: | Magenta toner cartridge is not compatible. |
| Remedy: | 1) Replace the magenta toner cartridge with a new one. |
| Error code: | C1-4110 |
| Display: | Prepare new cyan toner cartridge. |
| Description: | Prepare new cyan toner cartridge. |
| Causes: | Cyan toner is almost empty. |
| Remedy: | 1) Order new cyan toner cartridge because toner cartridge with level of “Low” will be exhausted soon. |
| Error code: | C1-4120, C1-4130, C1-4140 |
| Display: | Replace with new cyan toner cartridge End of life, Replace with new cyan toner cartridge |
| Description: | Replace with new cyan toner cartridge End of life, Replace with new cyan toner cartridge |
| Causes: | The cyan toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the cyan toner cartridge. 3) Install the new cyan toner cartridge. 4) Close the front cover. |
| Error code: | C1-4311 |
| Display: | Cyan Toner Cartridge Failure: #C1-4311. Install yellow toner cartridge again |
| Description: | Cyan Toner Cartridge Failure: #C1-4311. Install yellow toner cartridge again |
| Causes: | Cyan toner supply is inefficient or abnormal. |
| Remedy: | 1) Open the front cover. 2) Remove the cyan toner cartridge. Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 3) Check if the toner supply pipe is blocked. If it is closed, open it. 4) Close the front cover. |
| Error code: | C1-4411 |
| Display: | Cyan toner cartridge is not installed. Install it. |
| Description: | The cyan toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the cyan toner cartridge is installed. 2) Remove and reinstall the cyan toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the cyan toner cartridge(CLT-C809S) with a new one. |
| Error code: | C1-4512 |
| Display: | Cyan toner cartridge is not compatible. Check users guide |
| Description: | Cyan toner cartridge is not compatible. Check users guide. |
| Causes: | Cyan toner cartridge is not compatible. |
| Remedy: | 1) Replace the cyan toner cartridge with a new one. |
| Error code: | C1-5110 |
| Display: | Prepare new black toner cartridge. |
| Description: | Prepare new black toner cartridge. |
| Causes: | Black toner is almost empty. |
| Remedy: | 1) Order new black toner cartridge because toner cartridge with level of “Low” will be exhausted soon. |
| Error code: | C1-5120, C1-5130, C1-5140 |
| Display: | Replace with new black toner cartridge End of life, Replace with new black toner cartridge. |
| Description: | Replace with new black toner cartridge End of life, Replace with new black toner cartridge |
| Causes: | The black toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the black toner cartridge. 3) Install the new black toner cartridge. 4) Close the front cover. |
| Error code: | C1-5311 |
| Display: | Black Toner Cartridge Failure: #C1-5311. Install black toner cartridge again |
| Description: | Black Toner Cartridge Failure: #C1-5311. Install black toner cartridge again |
| Causes: | Black toner supply is inefficient or abnormal. |
| Remedy: | 1) Open the front cover. 2) Remove the black toner cartridge. Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 3) Check if the toner supply pipe is blocked. If it is closed, open it. 4) Close the front cover. |
| Error code: | C1-5411 |
| Display: | Black toner cartridge is not installed. Install it. |
| Description: | The black toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the black toner cartridge is installed. 2) Remove and reinstall the black toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the black toner cartridge(CLT-K809S) with a new one. |
| Error code: | C1-5512 |
| Display: | Black toner cartridge is not compatible. Check users guide. |
| Description: | Black toner cartridge is not compatible. Check users guide. |
| Causes: | Black toner cartridge is not compatible. |
| Remedy: | 1) Replace the black toner cartridge with a new one. |
| Error code: | C3-2110 |
| Display: | Prepare new yellow imaging unit |
| Description: | Prepare new yellow imaging unit |
| Causes: | Yellow drum unit has almost reached the end of its life. |
| Remedy: | 1) Order new yellow drum unit because drum unit with level of “Low” will be exhausted soon. |
| Error code: | C3-2130, C3-2140 |
| Display: | End of life, Replace with new yellow imaging unit |
| Description: | End of life, Replace with new yellow imaging unit |
| Causes: | Yellow drum unit is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the yellow drum unit. 4) Install the new yellow drum unit. 5) Clean the LSU window. 6) Install the waste toner container. 7) Close the front cover. |
| Error code: | C3-2411 |
| Display: | Yellow imaging unit is not installed. Install it. |
| Description: | Yellow imaging unit is not installed. Install it. |
| Causes: | The yellow drum unit is not installed. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove and reinstall the yellow drum unit 4) Install the waste toner container. 5) Close the front cover. |
| Error code: | C3-2512 |
| Display: | Yellow imaging unit is not compatible. Check user`s guide |
| Description: | Yellow imaging unit is not compatible. Check user`s guide |
| Causes: | Yellow drum unit is not compatible. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the yellow drum unit. Check if the drum unit is compatible with the machine. 4) If the drum unit is not a samsung genuine, replace it with a new one. |
| Error code: | C3-3110 |
| Display: | Prepare new magenta imaging unit |
| Description: | Prepare new magenta imaging unit |
| Causes: | Magenta drum unit has almost reached the end of its life. |
| Remedy: | 1) Order new magenta drum unit because drum unit with level of “Low” will be exhausted soon. |
| Error code: | C3-3130, C3-3140 |
| Display: | End of life, Replace with new magenta imaging unit |
| Description: | End of life, Replace with new magenta imaging unit |
| Causes: | Magenta drum unit is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the magenta drum unit. 4) Install the new magenta drum unit. 5) Clean the LSU window. 6) Install the waste toner container. 7) Close the front cover. |
| Error code: | C3-3411 |
| Display: | Magenta imaging unit is not installed. Install it. |
| Description: | Magenta imaging unit is not installed. Install it. |
| Causes: | The magenta drum unit is not installed. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove and reinstall the magenta drum unit. 4) Install the waste toner container. 5) Close the front cover. |
| Error code: | C3-3512 |
| Display: | Magenta imaging unit is not compatible. Check user`s guide |
| Description: | Magenta imaging unit is not compatible. Check user`s guide |
| Causes: | Magenta drum unit is not compatible. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the magenta drum unit. Check if the drum unit is compatible with the machine. 4) If the drum unit is not a samsung genuine, replace it with a new one. |
| Error code: | C3-4110 |
| Display: | Prepare new cyan imaging unit |
| Description: | Prepare new cyan imaging unit |
| Causes: | Cyan drum unit has almost reached the end of its life. |
| Remedy: | 1) Order new cyan drum unit because drum unit with level of “Low” will be exhausted soon. |
| Error code: | C3-4130, C3-4140 |
| Display: | End of life, Replace with new magenta imaging unit |
| Description: | End of life, Replace with new magenta imaging unit |
| Causes: | Cyan drum unit is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the cyan drum unit. 4) Install the new cyan drum unit. 5) Clean the LSU window. 6) Install the waste toner container. 7) Close the front cover. |
| Error code: | C3-4411 |
| Display: | Cyan imaging unit is not installed. Install it. |
| Description: | Cyan imaging unit is not installed. Install it. Cyan Imaging Unit Failure: #C3-4414. Install imaging unit again. |
| Causes: | The cyan drum unit is not installed. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove and reinstall the cyan drum unit 4) Install the waste toner container. 5) Close the front cover. |
| Error code: | C3-4512 |
| Display: | Cyan imaging unit is not compatible. Check user`s guide |
| Description: | Cyan imaging unit is not compatible. Check user`s guide |
| Causes: | Cyan drum unit is not compatible. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the cyan drum unit. Check if the drum unit is compatible with the machine. 4) If the drum unit is not a samsung genuine, replace it with a new one. |
| Error code: | C3-5110 |
| Display: | Prepare new cyan imaging unit |
| Description: | Prepare new cyan imaging unit |
| Causes: | Black drum unit has almost reached the end of its life. |
| Remedy: | 1) Order new black drum unit because drum unit with level of “Low” will be exhausted soon. |
| Error code: | C3-5130, C3-5140 |
| Display: | End of life, Replace with new magenta imaging unit |
| Description: | End of life, Replace with new magenta imaging unit |
| Causes: | Black drum unit is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the black drum unit. 4) Install the new black drum unit. 5) Clean the LSU window. 6) Install the waste toner container. 7) Close the front cover. |
| Error code: | C3-5411 |
| Display: | Black imaging unit is not installed. Install it. |
| Description: | Black imaging unit is not installed. Install it. |
| Causes: | The black drum unit is not installed. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove and reinstall the black drum unit 4) Install the waste toner container. 5) Close the front cover. |
| Error code: | C3-5512 |
| Display: | Black imaging unit is not compatible. Check user`s guide |
| Description: | Black imaging unit is not compatible. Check user`s guide |
| Causes: | Black drum unit is not compatible. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the black drum unit. Check if the drum unit is compatible with the machine. 4) If the drum unit is not a samsung genuine, replace it with a new one. |
| Error code: | C5-1110, C5-1120 |
| Display: | Prepare new Transfer belt Replace new Transfer belt |
| Description: | Prepare new Transfer belt Replace new Transfer belt |
| Causes: | The ITB Unit is at the end of its life. |
| Remedy: | 1) Print the supply information report. Check the life remaining of the ITB unit. 2) If its life is at the end, turn the machine off and replace the ITB unit with new one. |
| Error code: | C6-1310 |
| Display: | Fuser unit is not installed. Install it |
| Description: | Fuser unit is not installed. Install it. |
| Causes: | The fuser unit is not installed or fuser unit connector is not connected properly. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Open the side cover. Check if the fuser unit is installed. If not, install the fuser unit. 4) If the fuser unit is installed, remove it. 5) Check if the fuser draw connector (JC39–01677A) is broken or defective. 6) Install the fuser unit. 7) If the problem persists, replace the fuser unit(JC91-01157A (220V) /JC91-01158A (110V)). |
| Error code: | C7-1110, C7-1130 |
| Display: | Waste toner container is almost full. Order new one. Waste toner container is full. Replace it. |
| Description: | Waste toner container is almost full. Order new one. Waste toner container is full. Replace it. |
| Causes: | The life of the waste toner container expires soon or has expired. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. Install a new waste toner container. 3) Close the front cover. |
| Error code: | C7-1311 |
| Display: | Waste toner container is not installed. Install it. |
| Description: | Not Installed Waste tank |
| Causes: | The waste toner container is not installed |
| Remedy: | 1) Check if the waste toner container is installed properly. 2) Remove and reinstall the waste toner container. |
| Error code: | C8-2210, C8-2310 |
| Display: | Yellow Developer Failure: #C8-2210. Turn off then on Yellow Developer Failure: #C8-2310. Install yellow developer unit again |
| Description: | Yellow Developer Failure: #C8-2210. Turn off then on Yellow Developer Failure: #C8-2310. Install yellow developer unit again |
| Causes: | The yellow developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the yellow developer unit. 8) If the problem persists, replace the yellow developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-3210, C8-3310 |
| Display: | Magenta Developer Failure: #C8-3210. Turn off then on Magenta Developer Failure: #C8-3310. Install magenta developer unit again. |
| Description: | Magenta Developer Failure: #C8-3210. Turn off then on Magenta Developer Failure: #C8-3310. Install magenta developer unit again |
| Causes: | The magenta developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the magenta developer unit. 8) If the problem persists, replace the magenta developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-4210, C8-4310 |
| Display: | Cyan Developer Failure: #C8-4210. Turn off then on Cyan Developer Failure: #C8-4310. Install cyan developer unit again |
| Description: | Cyan Developer Failure: #C8-4210. Turn off then on Cyan Developer Failure: #C8-4310. Install cyan developer unit again |
| Causes: | The cyan developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the cyan developer unit. 8) If the problem persists, replace the cyan developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-5210, C8-5310 |
| Display: | Black Developer Failure: #C8-5210. Turn off then on Black Developer Failure: #C8-5310. Install black developer unit again |
| Description: | Black Developer Failure: #C8-5210. Turn off then on Black Developer Failure: #C8-5310. Install black developer unit again |
| Causes: | The black developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the black developer unit. 8) If the problem persists, replace the black developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C9-2110, C9-2120 |
| Display: | Replace with new Transfer roller. |
| Description: | Replace with new Transfer roller. |
| Causes: | The life of the second transfer roller(T2) expires soon or has expired. |
| Remedy: | 1) Open the side cover. 2) Replace the second transfer roller(JC95-01942A) with a new one. 3) Close the side cover. 4) Enter SVC mode. • To enter the service mode, tap "Service Mode" App. When the password dialog box appears, enter “1934” and press the “OK” button. 5) Select “TRANSFER” (INFORMATION > Supply Status > Field Replacement Unit > TRANSFER) 6) Select “T2 Roller”. The “RESET” button will be activated. Click “RESET” to clear the T2 Roller count. 7) Exit the SVC mode by pushing the home button. |
| Error code: | C9-2220, C9-2120 |
| Display: | TR Failure: #C9-2220. Install transfer roller again |
| Description: | The life of the second transfer roller(T2) is not installed. |
| Remedy: | 1) Open the side cover. 2) Remove and reinstall the second transfer roller. 3) Close the side cover. 4) If the problem persists, replace the HVPS board(JC44-00212A). |
| Error code: | H1-1311, H1-1312, H1-1313, H1-1314, H1-1315, H1-1317, H1-1318 |
| Display: | Paper jam in Tray 3. |
| Description: | Paper jam has occurred in tray3. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the DCF Take Away-Cover. Remove the jammed paper. 2) Remove tray3. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray3. 3) If this jam error occurs frequently, check the rollers below. a) Remove the tray3 and tray4. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A). 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the DCF pick up unit1. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on DCF board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001381). d) Install the DCF pick up unit1. 5) If the problem persists after checking step 3~4, check the following. a) Remove the DCF pick up unit1. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the DCF pick up unit1(JC93-00513A) or defective part. 6) Check the DCF feed motor. a) Check if the DCF feed motor cable is connected correctly. b) If the connection is OK, replace the DCF feed drive unit(JC93-00447A). 7) Check the DCF pick up motor. a) Check if the DCF pick up motor cable is connected correctly. b) If the connection is OK, replace the DCF pick up drive unit(JC93-00442A). |
| Error code: | H1-1322 |
| Display: | Tray 3 cassette is pulled out. Insert it properly. |
| Description: | Tray 3 cassette is pulled out. Insert it properly. |
| Causes: | Tray 3 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert tray3 correctly. 2) If the problem persists, remove tray3 and tray4. Look inside machine. 3) Check if the auto size sensor cable is connected correctly. Unplug and reconnect it. 4) If the connection is OK, replace the auto size sensor(JC93-00018A). 5) If the problem persists, replace the DCF board(JC92-02453A). |
| Error code: | H1-1351, H1-1352 |
| Display: | Paper is low in Tray 3. Load paper. Paper is empty in Tray 3. Load paper. |
| Description: | Paper in the tray is less than 10%. / The photo sensor is defective.). |
| Causes: | Paper in the tray3 is less than 10% of specification or empty. / The photo sensor is defective. |
| Remedy: | 1) Remove tray3. Load the paper in the tray3. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the DCF pick up unit1. b) Check if the photo sensor in the DCF pick up unit1 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-03199A) is defective, replace it. |
| Error code: | H1-1353 |
| Display: | Input System Failure #H1-1353 : Pull Tray 3 out and insert it. |
| Description: | Input System Failure #H1-1353 : Pull Tray 3 out and insert it. |
| Causes: | The paper is not fed from tray3. |
| Remedy: | 1) Remove and insert tray3 correctly. 2) Turn the machine off then on. 3) If the problem persists, turn the machine off. 4) Remove the Bracket Rear Cover after removing 5 screws. 5) Check if the connection between the DCF pick up drive and DCF board is correct. 6) If the connection is OK, replace the pick up drive unit(JC93-00442A). 7) If the problem persists, check the following. a) Remove the DCF pick up unit1. b) Check if the photo sensor in the DCF pick up unit1 is contaminated, clean it. c) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | H1-1411, H1-1412, H1-1417, H1-1418 |
| Display: | Paper jam in Tray 4. |
| Description: | Paper jam has occurred in tray4. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the DCF Take Away-Cover. Remove the jammed paper. 2) Remove tray4. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray4. 3) If this jam error occurs frequently, check the follows. a) Remove tray3 and tray4. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A). 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the DCF pick up unit2. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on DCF board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001381). d) Install the DCF pick up unit2. 5) If the problem persists after checking step 3~4, check the following. a) Remove the DCF pick up unit2. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the DCF pick up unit2(JC93-00513A) or defective part. 6) Check the DCF feed motor. a) Check if the DCF feed motor cable is connected correctly. b) If the connection is OK, replace the DCF feed drive unit(JC93-00447A). 7) Check the DCF pick up motor. a) Check if the DCF pick up motor cable is connected correctly. b) If the connection is OK, replace the DCF pick up drive unit(JC93-00442A). |
| Error code: | H1-1422 |
| Display: | Tray 4 cassette is pulled out. Insert it properly. |
| Description: | Tray 4 cassette is pulled out. Insert it properly. |
| Causes: | Tray 4 is pulled out or the auto size sensor connector is not connected or is broken. |
| Remedy: | 1) Remove and insert tray4 correctly. 2) If the problem persists, remove tray3 and tray4. Look inside machine. 3) Check if the auto size sensor cable is connected correctly. Unplug and reconnect it. 4) If the connection is OK, replace the auto size sensor(JC93-00018A). 5) If the problem persists, replace the DCF board(JC92-02453A). |
| Error code: | H1-1451, H1-1452 |
| Display: | Paper is low in Tray 4. Load paper. Paper is empty in Tray 4. Load paper. |
| Description: | Paper in tray4 is less than 10%. / The photo sensor is defective. |
| Causes: | Paper in the tray4 is less than 10% of specification. / The photo sensor is defective. |
| Remedy: | 1) Remove the tray4. Load the paper in the tray4. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the DCF pick up unit2. b) Check if the photo sensor in the DCF pick up unit2 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-03199A) is defective, replace it. |
| Error code: | H1-1453 |
| Display: | Input System Failure #H1-1453 : Pull Tray 4 out and insert it. |
| Description: | Input System Failure #H1-1453 : Pull Tray 4 out and insert it. |
| Causes: | The paper is not fed from tray4. |
| Remedy: | 1) Remove and insert tray4 correctly. 2) Turn the machine off then on. 3) If the problem persists, turn the machine off. 4) Remove the Bracket Rear Cover after removing 5 screws. 5) Check if the connection between the DCF pick up drive and DCF board is correct. 6) If the connection is OK, replace the pick up drive unit(JC93-00442A). 7) If the problem persists, check the following. a) Remove the DCF pick up unit2. b) Check if the photo sensor in the DCF pick up unit2 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | H1-5323 |
| Display: | Tray door is open. Close the door |
| Description: | Tray door is open. Close the door |
| Causes: | DCF Takeaway-Cover is open. / I/L-Switch harness or connector is defective. |
| Remedy: | 1) Open and close the DCF Take away-Cover correctly. 2) If the problem persists, check the following. a) Check if I/L-Switch(HARNESS-DCF COVER OPEN)(JC39–01696A) is not operating normally. If it is defective, replace it. b) If the I/L Switch is OK, replace the DCF board(JC92–02453A). |
| Error code: | H1-5330 |
| Display: | DCF Failure #H1-5330. Check internal DCF connection. |
| Description: | DCF Failure #H1-5330. Check internal DCF connection. |
| Causes: | A communication error between the optional tray and the main machine has occurred. |
| Remedy: | 1) Lift up and release the DCF unit from the machine. 2) Remove the Bracket Rear Cover after removing 5 screws. 3) Check if the interface connector is connected to the DCF board. If the interface connector(JC39–01690A) is defective, replace it. 4) If the problem persists, replace the DCF board. |
| Error code: | H2-6700, H2-6701, H2-6702, H2-6703, H2-6704, H2-6705 |
| Display: | Paper jam inside of finisher Paper jam at exit of finisher |
| Description: | Paper failed to pass finisher`s paper transportation path within the specified time. |
| Remedy: | 1) Open finisher jam cover, and make sure that the paper is on the paper path. If there is paper, remove paper manually. 2) If the error does not disappear even after removing paper and closing finisher jam door, follow the instructions below: a) Does finisher input sensor work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher input sensor(JC81-09686A). iv) Replace the finisher main board(JC81-09692A). b) Check if any debris is present. Please make sure to remove any debris. |
| Error code: | H2-6706 |
| Display: | Finisher Failure: #H2-6706. Check finisher |
| Description: | Finisher Failure: #H2-6706. Check finisher |
| Causes: | Transport motor does not work during Initializing. |
| Remedy: | 1) If there is jammed paper on the paper path, removing paper manually. Open and close finisher stapler door or jam cover to check if finisher executes initialization process. If component still doesn’t go back to home position and error does not disappear, follow the instructions below: 2) Does the transport motor work well? a) Make sure transport motor cable is connected well to the motor connector. b) Make sure transport motor cable is connected well to the finisher main board. c) Replace the transport motor. d) Replace the finisher main board. |
| Error code: | H2-6707 ... H2-6725 |
| Display: | Finisher Failure: #H2-67xx. Check finisher |
| Description: | Component does not move to or leave home position. |
| Remedy: | 1) If there is jammed paper on the paper path, remove paper manually. Open and close finisher stapler door or jam cover to check if finisher executes initialization process. 2) If component still doesn’t go back to home position and error does not disappear, follow the instructions below: a) Does finisher input sensor work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher input sensor(JC81-09686A). iv) Replace the finisher main board(JC81-09692A). b) Does finisher component motor work well? i) Make sure finisher component motor cable is connected well to the motor connector. ii) Make sure finisher component motor cable is connected well to the main board connector. iii) Replace the finisher component motor(JC81-09680A / JC81-09681A). iv) Replace the finisher main board(JC81-09692A). c) Do finisher component parts work well? i) Make sure component parts can move or rotate smoothly. ii) Make sure there is no any mechanical interference to stop moving or rotating. iii) Make sure the belt is tight on the correct position, if it has the belt. d) Does finisher component motor gear set work well? i) Make sure gear set can rotate smoothly. ii) Make sure each gear is not broken. iii) Replace the Eject-Sub Assy. e) Check if any debris existed. Please make sure to remove any debris. |
| Error code: | H2-6726, H2-6727 |
| Display: | Finisher Stapler door is open. Close it. Finisher Jam door is open. Close it. |
| Description: | Finisher Stapler door is open. Close it Finisher Top door is open. Close it |
| Causes: | Finisher door is not closed. |
| Remedy: | 1) Close door to do finisher initialization. If error does not disappear, follow the instructions below : 2) Does finisher door cover can close well? a) The finisher door cover itself can be closed well. b) The both of the finisher door covers can push door open sensor switch well. c) The finisher door open sensor switch can be pushed well. d) Replace finisher cover door or switch. 3) Does finisher input sensor work well? a) Make sure finisher input sensor cable is connected well to the sensor connector. b) Make sure finisher input sensor cable is connected well to the main board connector. c) Replace the finisher input sensor(JC90-01301A). d) Replace the finisher main board(JC92-02774A). |
| Error code: | H2-6728, H2-6729, H2-6730, H2-6731 |
| Display: | Finisher Failure: #H2-67xx. Check finisher. |
| Description: | Finisher stapler head does not move to or leave home position. |
| Remedy: | 1) If there is jammed paper on the stapler, removing paper manually. Open and close finisher stapler door or jam cover to check if finisher executes initialization process. 2) If stapler still doesn’t go back to home position and error does not disappear, follow the instructions below : a) Can finisher stapler cartridge can be pulled out? i) Rotate stapler gear manually to move stapler head back to home (top) position. ii) Remove staple completely from stapler cartridge. iii) Remove staples from inside stapler. b) Does finisher stapler input sensor work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher stapler(JC81-07376A). iv) Replace the finisher main board(JC81-09692A). c) Does finisher stapler motor work well? i) Make sure finisher stapler motor cable is connected well to the stapler motor connector. ii) Make sure finisher stapler motor cable is connected well to the main board connector. iii) Replace the finisher stapler(JC81-07376A). iv) Replace the finisher main board(JC81-09692A). d) Check if any debris (staple) exists. Please make sure to remove any debris. |
| Error code: | H2-6732, H2-6733 |
| Display: | Staple cartridge is low. Replace it. Staple cartridge is empty. Replace it. |
| Description: | Staple cartridge is low. Replace it. Staple cartridge is empty. Replace it. |
| Causes: | Finisher stapler cartridge is necessary to refill. |
| Remedy: | 1) Open finisher stapler door to refill cartridge and then close door. Self-Priming will be executed automatically if necessary. If stapler error or warning does not disappear, follow the instructions below : 2) Does finisher stapler cartridge refill box equip well? a) Make sure stapler refill box equip well into cartridge. (JC81-07408A) b) Make sure staples doesn’t jam near stapler head. 3) Does finisher stapler input sensor work well? a) Make sure finisher input sensor cable is connected well to the sensor connector. b) Make sure finisher input sensor cable is connected well to the main board connector. c) Replace the finisher stapler(JC81-07917A). d) Replace the finisher main board. |
| Error code: | H2-6734 |
| Display: | Finisher Failure: #H2-6734. Check finisher |
| Description: | Finisher Failure: #H2-6734. Check finisher |
| Causes: | Stapler initialization is failed. |
| Remedy: | 1) Remove and reassemble the staple unit. 2) If necessary, replace the staple unit. 3) If necessary, replace the finisher main board. |
| Error code: | H2-6735 |
| Display: | Too much paper in finisher stacker. Remove printed paper. |
| Description: | Too much paper in finisher stacker. Remove printed paper |
| Causes: | Finisher Top tray is full. |
| Remedy: | 1) Remove paper on the finisher main tray. Main tray will move downward and upward to clear stack full warning. If warning does not disappear, follow the instructions below : 2) Does Top tray limit sensor work well? a) Make sure Top tray limit sensor cable is connected well to the sensor connector. b) Make sure Top tray limit sensor cable is connected well to the main board connector. c) Check the tray limit actuator’s condition. (JC66-04200A) d) Replace the Top tray limit sensor(JC39-02178A). e) Replace the finisher main board. 3) Does finisher main tray motor work well? a) Make sure finisher top tray motor cable is connected well to the main tray motor connector. b) Make sure finisher top tray motor cable is connected well to the main board connector. c) Replace the finisher main tray motor. d) Replace the finisher main board. 4) Check if any debris(staple)existed. Please make sure to remove any debris. |
| Error code: | H2-6736 ... H2-6743 |
| Display: | Finisher Failure: #H2-67xx. Check finisher |
| Description: | Main Tray does not move to or leave home position. |
| Remedy: | 1) If there is jammed paper on the Main Tray, removing paper manually. Open and close finisher stapler door or jam cover to check if finisher executes initialization process. 2) If Main Tray still doesn’t go back to home position and error does not disappear, follow the instructions below: a) Does finisher input sensor (Standby & Home sensor) work well? i) Make sure finisher input sensor cable is connected well to the sensor connector. ii) Make sure finisher input sensor cable is connected well to the main board connector. iii) Replace the finisher input sensor(JC81-09686A). iv) Replace the finisher main board(JC81-09692A). b) Does finisher Main Tray motor work well? i) Make sure finisher Main Tray motor cable is connected well to the motor connector. ii) Make sure finisher Main Tray motor cable is connected well to the main board connector. iii) Replace the finisher Main Tray motor(JC81-09679A). iv) Replace the finisher main board(JC81-09692A). b) Does finisher Main Tray motor work well? i) Make sure finisher Main Tray motor cable is connected well to the motor connector. ii) Make sure finisher Main Tray motor cable is connected well to the main board connector. iii) Replace the finisher Main Tray motor(JC81-09679A). iv) Replace the finisher main board(JC81-09692A). c) Do finisher Main Tray parts work well? i) Make sure Main Tray parts can move or rotate smoothly. ii) Make sure there are no mechanical interference to stop moving or rotating. iii) Make sure the belt is tight in the correct position, if it has a belt. d) Does finisher Main Tray motor gear set work well? i) Make sure gear set can rotate smoothly. ii) Make sure each gear is not broken. iii) Replace the gear set(JC81-9585A / JC81-09586A). e) Check if any debris is present. Please make sure to remove any debris. |
| Error code: | H2-6744 |
| Display: | Staple Cartridge not install. Install it. |
| Description: | Finisher Failure: #H2-6A63. Check finisher. |
| Causes: | Finisher stapler cartridge is not installed into stapler. |
| Remedy: | 1) Open finisher stapler door to put back cartridge into stapler and then close door. Self-Priming will be executed automatically if necessary. If stapler warning does not disappear, follow the instructions below : 2) Does finisher stapler input sensor work well? a) Make sure finisher input sensor cable is connected well to the sensor connector. b) Make sure finisher input sensor cable is connected well to the main board connector. c) Replace the finisher stapler cartridge. (JC81-07408A) d) Replace the finisher stapler. (JC81-07917A) e) Replace the finisher main board. 3) Check if any debris(staple)existed. Please make sure to remove any debris. |
| Error code: | H2-6A50 |
| Display: | Finisher Failure: #H2-6A50. Check finisher. |
| Description: | Finisher Failure: #H2-6A50. Check finisher |
| Causes: | Communication error with finisher |
| Remedy: | 1) Copier power off and power on. If the error does not disappear, follow the instructions below: 2) Does finisher work well? a) Make sure finisher interface cable is connected with main board. b) Replace the finisher main board. |
| Error code: | H2-6A63 |
| Display: | Finisher Failure: #H2-6A63. Check finisher. |
| Description: | Staple cartridge is empty. Replace it |
| Causes: | Finisher stapler cartridge is necessary to refill. |
| Remedy: | 1) Open finisher stapler door to refill cartridge and then close door. Self-Priming will be executed automatically if necessary. If stapler error or warning does not disappear, follow the instructions below : 2) Does finisher stapler cartridge refill box equip well? a) Make sure stapler refill box equip well into cartridge. (JC81-07408A) b) Make sure staples doesn’t jam near stapler head. 3) Does finisher stapler input sensor work well? a) Make sure finisher input sensor cable is connected well to the sensor connector. b) Make sure finisher input sensor cable is connected well to the main board connector. c) Replace the finisher stapler(JC81-07917A). d) Replace the finisher main board. |
| Error code: | M1-1113, M2-1121 |
| Display: | Paper jam in Tray 1. |
| Description: | Paper jam in Tray 1. |
| Causes: | Paper jam has occurred in tray1. |
| Remedy: | 1) Open the side cover and check if a foreign substance or paper is jammed inside the machine. 2) Remove tray1 and remove the jammed paper. 3) If this jam error occurs frequently, check the rollers of the pick up unit1. a) Remove tray1 and tray2. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93–00540A). 4) If the problem persists, check the pickup unit1 and feed sensor. a) Check if the pickup unit1 and feed sensor operate correctly. b) Check if the pickup unit1 harness is connected to the main board correctly. c) Check if the connector of the Guide-feed assembly is connected correctly. d) Check if the harness of pickup unit and feed sensor are connected correctly. 5) If the problem persists, check the pickup unit1. a) Remove the pickup unit and check the actuator and photo-sensor. b) Push the pickup-lever and check if it operates correctly. 6) If the problem persists, replace the pickup drive unit(JC93–00422A) or Pickup unit1(JC93-00511A). |
| Error code: | M1-1213, M2-1131 |
| Display: | Paper jam in Tray 2. |
| Description: | Paper jam in Tray 2. |
| Causes: | Paper jam has occurred in tray2. |
| Remedy: | 1) Open the side cover and check if a foreign substance or paper is jammed inside the machine. 2) Remove tray2 and remove the jammed paper. 3) If this jam error occurs frequently, check the rollers of the pick up unit1. a) Remove tray1 and tray2. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93–00540A). 4) If the problem persists, check the pickup unit2 and feed sensor. a) Check if the pickup unit2 and feed sensor operate correctly. b) Check if the pickup unit2 harness is connected to the main board correctly. c) Check if the connector of the Guide-feed assembly is connected correctly. d) Check if the harness of pickup unit and feed sensor are connected correctly. 5) If the problem persists, check the pickup unit2. a) Remove the pickup unit2 and check the actuator and photo-sensor. b) Push the pickup-lever and check if it operates correctly. 6) If the problem persists, replace the pickup drive unit2(JC93–00422A) or Pickup unit1(JC93-00512A). |
| Error code: | M1-1610 |
| Display: | Paper jam in MP Tray. |
| Description: | Paper Jamin MP tray |
| Causes: | The jammed paper has occurred in the MP tray. |
| Remedy: | 1) Remove the jammed paper. 2) If the jammed paper occurs continually, check the followings. a) Check if the pick up/forward/reverse roller are worn out or contaminated. Clean the contaminated part or replace it. b) Check if the actuator is assembled correctly. 3) If the pick up clutch is defective, replace it. 4) If the problem persists, replace the MP unit. |
| Error code: | M1-3122 |
| Display: | Tray 1 cassette is pulled out. Insert it properly. |
| Description: | Tray 1 cassette is pulled out. Insert it properly. |
| Causes: | Tray 1 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert Tray1 correctly. 2) If Tray1 is not locked or pulled out without holding the locking lever, remove Tray1. 3) Check if foreign substance or paper is inside the space between Tray1,2. If so, please remove it. 4) If the problem persists, check that the auto size sensor is connected properly. 5) If the problem persists, replace the main board(JC92–02452A). |
| Error code: | M1-3222 |
| Display: | Tray 2 cassette is pulled out. Insert it properly. |
| Description: | Tray 2 cassette is pulled out. Insert it properly. |
| Causes: | Tray 2 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert Tray2 correctly. 2) If Tray2 is not locked or pulled out without holding the locking lever, remove Tray2. 3) Check if foreign substance or paper is inside the space between Tray1,2. If so, please remove it. 4) If the problem persists, check that the auto size sensor is connected properly. 5) If the problem persists, replace the main board(JC92–02452A). |
| Error code: | M1-4111 |
| Display: | Input System Failure #M1-4111 : Pull Tray 1 out and insert it. |
| Description: | Input System Failure #M1–4111 : Pull Tray 1 out and insert it. |
| Causes: | The paper is not fed from tray1. |
| Remedy: | 1) Remove tray1 and re-install it. 2) If the problem persists, turn the machine off then on. 3) Enter SVC mode. Execute pickup motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100-0370) 4) If the pick up motor operation is abnormal, turn the machine off. 5) Remove the rear cover. 6) Check if the connection between pickup drive unit1 and main board is secure. 7) If the connection is OK, replace the pickup drive unit(JC93-00442A). 8) If the problem persists, check the pickup unit1. a) Check if the photo sensor in the pickup unit1 is defective. b) If the sensor(0604–001393) is defective, replace it. |
| Error code: | M1-4211 |
| Display: | Input System Failure #M1-4211 : Pull Tray 2 out and insert it. |
| Description: | Input System Failure #M1-4211 : Pull Tray 2 out and insert it. |
| Causes: | The paper is not fed from tray2. |
| Remedy: | 1) Remove tray2 and re-install it. 2) If the problem persists, turn the machine off then on. 3) Enter SVC mode. Execute pickup motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100-0380) 4) If the pick up motor operation is abnormal, turn the machine off. 5) Remove the rear cover. 6) Check if the connection between pickup drive unit2 and main board is secure. 7) If the connection is OK, replace the pickup drive unit(JC93-00442A). 8) If the problem persists, check the pickup unit2. a) Check if the photo sensor in the pickup unit2 is defective. b) If the sensor(0604–001393) is defective, replace it. |
| Error code: | M1-5111, M1-5112 |
| Display: | Paper is low in Tray 1. Load paper. Paper is empty in Tray 1. Load paper. |
| Description: | Paper is low in Tray 1. Load paper. Paper is empty in Tray 1. Load paper. |
| Causes: | Paper in the tray1 is less than 10%. / The photo sensor is defective. |
| Remedy: | 1) Remove tray 1. Load paper in the tray. And insert tray 1. 2) If paper is loaded but error message has not disappeared, check the following: a) Turn the machine off. Open the Side Cover. b) Remove Pick-Up Unit1. c) If the photo sensor is contaminated, clean it. d) If the photo sensor is defective, replace it(0604–001393). e) If the actuator is defective, replace it(JC66-03199A). |
| Error code: | M1-5211, M1-5212 |
| Display: | Paper is low in Tray 2. Load paper. Paper is empty in Tray 2. Load paper. |
| Description: | Paper is low in Tray 2. Load paper. Paper is empty in Tray 2. Load paper. |
| Causes: | Paper in the tray is less than 10% of specification. / The photo sensor is defective. |
| Remedy: | 1) Remove tray 2. Load paper in the tray, and insert the tray 2. 2) If paper is loaded but error message has not disappeared, check the following : a) Turn the machine off. Open the Side Cover. b) Remove Pick-Up Unit2. c) If the photo sensor is contaminated, clean it. d) If the photo sensor is defective, replace it(0604–001393). e) If the actuator is defective, replace it(JC66-03199A). |
| Error code: | M1-5612 |
| Display: | Paper is empty in MP Tray. Load paper. |
| Description: | Paper is empty in MP Tray. Load paper. |
| Causes: | Paper in the MP tray is less than 10%. / The photo sensor is defective. |
| Remedy: | 1) Load the paper in the MP tray. 2) If paper is loaded but error message has not disappeared, check the following : a) If the photo sensor is contaminated, clean it. b) If the photo sensor is defective, replace it(0604–001393). c) If the actuator is defective, replace it(JC66-03217A). |
| Error code: | M2-1124, M2-1125 |
| Display: | Paper jam inside of machine |
| Description: | Paper jam in tray 1 Paper jam inside of machine. |
| Causes: | Paper jam has occurred inside the machine. (Feed drive unit is defective / Feed 1 sensor is defective.) • M2–1124 : The leading edge of the paper has not reached the feed 1 sensor within the specified time. • M2-1125 : The paper has not left from the feed 1 sensor within the specified time. |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute feed motor test. If the motor operation is normal, go to step d). b) Remove the rear cover. Check if the feed motor cable is connected correctly. c) If the connection is OK, replace the feed drive unit(JC93-00444A). d) If the feed motor operation is normal, check the feed 1 sensor. e) If the sensor operation is abnormal, check the harness. f) If the connection is OK, replace the feed sensor(0604-001381). |
| Error code: | M2-1134, M2-1135 |
| Display: | Paper jam inside of machine |
| Description: | Paper jam in tray 2 Paper jam in tray 1 |
| Causes: | Paper jam has occurred inside the machine. (Feed drive unit is defective / Feed 2 sensor is defective.) • M2–1134 : The leading edge of the paper has not reached the feed 2 sensor within the specified time. • M2-1135 : The paper has not left from the feed 2 sensor within the specified time. |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute feed motor test. If the motor operation is normal, go to step d). b) Remove the rear cover. Check if the feed motor cable is connected correctly. c) If the connection is OK, replace the feed drive unit(JC93-00444A). d) If the feed motor operation is normal, check the feed 2 sensor. e) If the sensor operation is abnormal, check the harness. f) If the connection is OK, replace the feed sensor 2 (0604-001381). |
| Error code: | M2-1211, M2-1213, M2-1214 |
| Display: | Paper jam inside of machine. |
| Description: | Paper jam inside of machine. |
| Causes: | Paper jam has occurred inside the machine. (Regi. roller drive is defective / Regi. sensor is defective.) • M2–1211 : When the machine is warming-up, jammed paper inside machine is detected. • M2–1213 : The leading edge of the paper has not reached the regi. sensor within the specified time. • M2-1214 : The paper has not left from the regi. sensor within the specified time. |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute Regi. motor test. If the motor operation is normal, go to step d). b) Remove the rear cover. Check if the Regi/MP motor cable is connected correctly. c) If the connection is OK, replace the Regi./MP drive unit(JC93-00443A). d) If the motor operation is normal, check the regi. sensor. e) If the sensor operation is abnormal, check the harness. f) If the connection is OK, replace the regi. sensor (0604-001381). |
| Error code: | M2-1331, M2-1333, M2-1334, M2-2111, M2-2113, M2-2114 |
| Display: | Paper jam inside of machine Paper jam at the top of duplex path |
| Description: | Paper jam has occurred inside the machine. |
| Remedy: | 1) Open the side cover. Remove jammed paper. 2) If the problem persists, check the following. a) Check the Regi sensor harness. If the harness is normal, replace the Regi. sensor (0604-001381). b) Check the sensors in the Side Unit. If the harness is normal, replace the defective sensor (0604-001393 ). |
| Error code: | M3-1411 |
| Display: | Paper jam in exit area. |
| Description: | Paper jam has occurred around the fuser unit.(At power-on / warm up , the machine detected paper jam in Inner tray Exit Sensor.) |
| Remedy: | • M3-1413 : The leading edge of the paper has not reached the feed 1 sensor within the specified time. • M3-1414 : The paper has not escaped from the feed 1 sensor within the specified time. 1) Open the side cover. Remove the jammed paper. 2) If the problem persists, check the following. a) Open the side cover. Check if the connector is connected properly. b) Remove the JOB-SEPARATOR. Check if the photo sensor is assembled correctly. c) Check if ACTUATOR-EXIT is assembled correctly. If the ACTUATOR-EXIT (JC66-02533A) is deformed or broken, replace it. d) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | M3-1413, M3-1414 |
| Display: | Paper jam in exit area. |
| Description: | Paper jam has occurred around the fuser unit.(Job separator connection is defective. / Actuator-Exit is defective.) |
| Causes: | Paper jam has occurred around the fuser unit.(Job separator connection is defective. / Actuator-Exit is defective.) |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If the problem persists, check the following. a) Open the side cover. Check if the connector is connected properly. b) Remove the JOB-SEPARATOR. Check if the photo sensor is assembled correctly. c) Check if ACTUATOR-EXIT is assembled correctly. If the ACTUATOR-EXIT (JC66-02533A) is deformed or broken, replace it. d) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | M3-2230, M3-2430 |
| Display: | Output tray is full. Remove printed media. |
| Description: | Output tray is full. Remove printed media. |
| Causes: | There is too much paper in output bin tray or inner tray. • M3-2230 : There is too much paper in output bin tray. • M3-2430 : There is too much paper in inner tray. |
| Remedy: | 1) Remove the paper from output bin tray or inner tray. 2) If this error ccurs continually, check the following. a) Check if the bin-full sensor and actuator is assembled correctly. b) Check if the bin-full sensor(0604–001393) is defective. |
| Error code: | S1-1113 |
| Display: | Video System Failure #S1-1113: Turn off then on. |
| Description: | Video System Failure #S1-1113: Turn off then on. |
| Causes: | The system has some problems due to CPU overheating. |
| Remedy: | 1) Turn the machine off. 2) Wait until the machine is cool, and then turn the machine on. 3) If the problem persists, turn the machine off again. 4) Remove the rear cover. 5) Replace the main board(JC92-02742A). 6) Assemble the rear cover. Turn the machine on. |
| Error code: | S1-1313 |
| Display: | The clock became initial time. Set a time again. |
| Description: | The clock became initial time. Set a time again. |
| Causes: | Saved time is invalid |
| Remedy: | 1) Set up the time and reboot the machine. a) Select “Machine Setup” on touch screen. b) Select “General Setting”. c) Select “Date and Time” and set the time. 2) If the problem persists, check the following. a) Remove the rear cover. b) Remove the fax holder from the main board. c) Measure the voltage of the battery. If the battery is normal, the measured value is over 3V. 3) If the battery is normal, replace the main board(JC92-02742A). |
| Error code: | S1-1411, S1-1413 |
| Display: | Video System Failure #S1-1411: Turn off then on. Video System Failure #S1-1413: Turn off then on. |
| Description: | SPGPv4-Chip is not working. |
| Causes: | Video chip in main board is defective. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, replace the main board(JC92-02452A). |
| Error code: | S1-2111 |
| Display: | Video System Failure #S1-2111: Turn off then on. |
| Description: | Video System Failure #S1-2111: Turn off then on. |
| Causes: | The machine can’t detect memory during booting. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Remove the rear cover. 4) Replace the main board(JC92-02742A). NOTE Insert the MSOK to the new main board. 5) Assemble the rear cover. Turn the machine on. |
| Error code: | S1-2411, S1-2421, S1-2422 |
| Display: | HDD System Failure #: Turn off then on. |
| Description: | HDD System Failure #S1-2411: Turn off then on. HDD System Failure #S1-2421: Turn off then on. HDD System Failure #S1-2422: Turn off then on. |
| Causes: | Hard Disk is not installed in the machine. / Hard Disk is defective. |
| Remedy: | 1) Check if the HDD is installed correctly. a) Remove the rear cover. b) Check if the HDD cable is connected correctly. 2) If the problem persists, replace the HDD(JC59–00035A). |
| Error code: | S1-2433, S1-2443, S1-2444, S1-2445, S1-2446, S1-2447, S1-2448, S1-2449 |
| Display: | HDD System Failure #: Turn off then on. |
| Description: | HDD partition is full or corrupted. |
| Remedy: | 1) Enter SVC mode. Select “System Recovery” in Service Function menu. 2) Execute hard disk format and firmware re-installation. 3) If the problem persistss, replace the HDD(JC59-00035A). |
| Error code: | S1-2434, S1-2435, S1-2436, S1-2437, S1-2438, S1-2439 |
| Display: | HDD Error #. Check users guide. |
| Description: | HDD partition or memory is full. |
| Remedy: | NOTE • S1-2434 : Addresses in Address book / User data in User profile • S1-2435 : Documents in Document box / Jobs in Secure job list / Fonts / Forms • S1-2436 : System Logs • S1-2437/3438/3439 : Printing Error / No Paper in Tray 1) Enter SVC mode. Select “Hard Disk Maintenance” in Service Function menu. 2) Execute hard disk format. 3) If the problem persistss, replace the HDD(JC59-00035A). |
| Error code: | S1-2510, S1-2511 |
| Display: | MSOK System Failure #: Turn off then on. |
| Description: | MSOK is not installed properly. / MSOK is defective. |
| Remedy: | 1) Remove the rear cover. 2) Check if the MSOK is inserted correctly. Remove and reinstall it. 3) If the problem persists, replace the main board(JC92-02429A). |
| Error code: | S1-4111 |
| Display: | Video System Failure #S1-4111: Turn off then on. |
| Description: | Video System Failure #S1-4111: Turn off then on. |
| Causes: | The main board can’t send the data through the network channel. |
| Remedy: | 1) Check if the green LED of the network port is on. 2) If not, unplug and reconnect the network cable. 3) If the problem persists, replace the main board(JC92-02742A). |
| Error code: | S1-4311 |
| Display: | Video System Failure #S1-4311: Turn off then on. |
| Description: | Video System Failure #S1-4311: Turn off then on. |
| Causes: | The USB device chip is defective. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Replace the OPE hub board. 4) Turn the machine on. |
| Error code: | S1-5521 |
| Display: | FDI device is not installed. Install the device. |
| Description: | The machine can’t detect the FDI device. |
| Causes: | FDI device was removed. |
| Remedy: | 1) Install the FDI device. 2) If the FDI device is already installed, update the firmware for main board. 3) Check the connection between FDI device and main board. a) Remove the rear cover. b) Check the connection between FDI unit and mainboard connection. 4) If FDI unit has problem, replace FDI unit(CLX-KIT10). 5) If the problem persists, replace the main board(JC92-02452A). |
| Error code: | S2-3114 |
| Display: | Engine System Failure #S2-3114: Turn off then on. |
| Description: | Engine System Failure #S2-3114: Turn off then on. |
| Causes: | ACR error has occurred. |
| Remedy: | 1) Execute “ACR calibration” manually. (Machine Setup > General Settings > Image Management > Auto Color Registration) 2) Clean the ACR sensor. 3) If the problem persists, replace the main board(JC92-02742A). |
| Error code: | S2-4210 |
| Display: | Front door is open. Close it. |
| Description: | Front door is open. Close it. |
| Causes: | Front cover or Side cover is opened. |
| Remedy: | 1) Close the front cover correctly. 2) Check if the cover open sensor connector is connected properly. Reconnect it. 3) If the sensor is defective, replace it. |
| Error code: | S2-4410 |
| Display: | Right door is open. Close it. |
| Description: | Right door is open. Close it. |
| Causes: | Front cover or Side cover is opened. |
| Remedy: | 1) Close the side cover correctly. 2) Check if the cover open sensor connector is connected properly. Reconnect it. 3) If the sensor is defective, replace it. |
| Error code: | S3-3111, S3-3211 |
| Display: | Scan System Failure #S3-3111: Turn off then on. Scan System Failure #S3-3211: Turn off then on. |
| Description: | DADF is not connected or communication error occurs with CIP6 board. |
| Remedy: | 1) Turn the machine off then on. If the problem persists, check the following: 2) Turn the machine off again. 3) Remove the scan rear cover. Check if the connector on scan joint board is connected correctly. 4) Remove the DADF rear cover. Check if the connector on DADF board is connected correctly. 5) If the connection is OK, replace the DADF board(JC92-02446A). |
| Error code: | S3-3121 |
| Display: | Scanner Locked |
| Description: | CIS unit in the scanner does not move. |
| Causes: | Scanner lock error has occurred. CIS does not move. |
| Remedy: | 1) Check if the CIS unit moves when turning the machine off then on. 2) Check if the CIS cable is connected correctly. Reconnect it. 3) If the CIS unit is defective, replace it. 4) Check if there is any defective part in the scanner. Find and replace it. 5) If the problem persists, replace the main board. |
| Error code: | S5-3111 |
| Display: | UI System Failure #S5-3111:Turn off then on. |
| Description: | UI System Failure #S5-3111:Turn off then on. |
| Causes: | Main board has critical problem which make its lockup or USB connection between main board and OPE has some problem. |
| Remedy: | 1) Turn off and turn on. And check if the problem disappears. a) If yes, go to step 2)-a). b) If no, go to step 2)-b). 2) Check the following procedure. a) Print the Error Information Report. . Service Mode - General - Print Reports - Error Information . Check the error code which is printed on the report. - If S5-3111 has occurred, go to step 4). - If S5-3112 has occurred, go to step 5)-c). - If S5-3113 has occurred, go to step 5)-d). b) Enter into System Recovery Mode. . How to enter System Recovery Mode : Turn on the machine with side cover open and power button on OPE is pressed state. . Check if entering System Recovery Mode is possible or not. - If entering System Recovery Mode is successful, go to step 3). - If entering System Recovery Mode fails, go to step 5)-d). 3) Execute the System Recovery. • Insert USB memory stick which has recovery one rom and execute recovery(HDD format). • Check if the problem disappears after system recovery(format complete). - If yes, go to step 4). - If no, go to step 5)-c). 4) Execute the firmware update. • Check if the problem disappears after one rom update. - If the problem disappears, go to step 5)-a). - If the problem happens sometimes, go to step 5)-b). 5) Check the following procedure. a) No more action is required because machine is recovered from S5-3111 error state. Please monitor the machine if S5-3111 happens again. b) Detailed analysis is required. Please capture the log and send it to development team in HQ. c) It seems that HDD or main board has some problem. Please replace HDD or main board with new one and check if the problem disappears. d) It seems that there is some critical issue in the USB connection between main board and OPE. Please try below steps. i) If WiFi module is installed, replace WiFi module with new one. ii) Check USB cable state between main board and OPE. iii) Replace the main board with new one. iv) Replace the OPE board with new one. |
| Error code: | S6-3122 |
| Display: | Network cable is disconnected. Check it. |
| Description: | Network cable is disconnected. Check it. |
| Causes: | Network cable is disconnected. |
| Remedy: | 1) Check if the green LED of the network port is on. 2) If not, unplug and reconnect the network cable. 3) If the problem persists, replace the main board(JC92-02742A). |
| Error code: | S6-3123, S6-3128 |
| Display: | This IP address conflicts with that of other system. Check it. 802.1x authentication failed. Please Contact the System Administrator. |
| Description: | Network Problem: IP Conflict 802.1x Network Error |
| Causes: | IP address conflicts with that of other system. |
| Remedy: | 1) Change the machine’s IP address. 2) Check the setting-up for 802.1x confirmation server. |
| Error code: | S7-2110 |
| Display: | Fuser Failure: #S7-2110. Turn off then on |
| Description: | Fuser Failure: #S7-2110. Turn off then on |
| Causes: | Heater control relay is abnormal. |
| Remedy: | 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) If the problem persists, replace the Fuser unit(110V : JC91-01158A, 220V : JC91-01157A). |
| Error code: | U1-2113, U1-2119 |
| Display: | Fuser Unit Failure: #U1-2113. Fuser Unit Failure: #U1-2119. |
| Description: | Fuser Unit Failure: #U1-2113. Fuser Unit Failure: #U1-2119. |
| Causes: | The thermistor can’t measure temperature. The hear-roller will not heat-up. |
| Remedy: | • U1–2113 : Error occurs at non-contact type Thermistor • U1–2119 : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 3) If the problem persists, check the following: a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567) or Non-contact type thermistor(1404–001453)is broken. 4) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 5) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2115 |
| Display: | Fuser Unit Failure: #U1-2115. Turn off then on. |
| Description: | Fuser Unit Failure: #U1-2115. Turn off then on. |
| Causes: | The pressure control unit(Cam unit)of the fuser is abnormal. |
| Remedy: | 1) Turn the machine off then open the side cover. 2) Remove and re-install the fuser unit, then turn the machine on. 3) If the problem persists, check the following : a) When the side-cover closes, check if the operation sound of the pressure control unit occurs. b) Check if the parts of the pressure control unit are abnormal. - Check if the shape of the CAM-REAR(JC66-03299A)) is broken. - Check if there are abnormal parts of the pressure control unit. c) Check if the fuser-motor is abnormal via SVC mode. 4) If the problem persists, replace the Fuser unit(110V : JC91-01158A, 220V : JC91-01157A). 5) If the problem persists, replace the pressure control unit or cam-motor or Main board(JC92-02742A). |
| Error code: | U1-2132, U1-2135 |
| Display: | Fuser Unit Failure: #U1-2132. Fuser Unit Failure: #U1-2135. |
| Description: | Fuser Unit Failure: #U1-2132. Fuser Unit Failure: #U1-2135. |
| Causes: | Temperature of the fuser rises abnormally. |
| Remedy: | • U1–2132 : Error occurs at non-contact type Thermistor • U1–2135 : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) Remove the fuser unit. After opening the jam cover, check jammed or wrapped paper is in the fuser unit. 4) If the problem persists, Check the following: a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567) or Non-contact type thermistor(1404–001453) is broken. 5) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 6) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2141, U1-2142 |
| Display: | Fuser Unit Failure: #U1-2141. Fuser Unit Failure: #U1-2142. |
| Description: | Fuser Unit Failure: #U1-2141. Fuser Unit Failure: #U1-2142 |
| Causes: | Temperature of the thermistor is higher than the maximum allowable temperature. |
| Remedy: | • U1–2141 : Error occurs at non-contact type Thermistor • U1–2142 : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 4) If the problem persists, Check the following: a) Check if the contact type thermistor(1404–001567) or Non-contact type thermistor(1404–001453) is broken. 5) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 6) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2316, U1-2317 |
| Display: | Fuser Unit Failure: #U1-2316. Fuser Unit Failure: #U1-2317. |
| Description: | Fuser Unit Failure: #U1-2316. Fuser Unit Failure: #U1-2317 |
| Causes: | Temperature of the fuser changes abnormally |
| Remedy: | • U1–2316 : Error occurs at non-contact type Thermistor • U1–2317 : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) If the problem persists, Check the following: a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567) or Non-contact type thermistor(1404–001453) is broken. 4) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 5) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2335, U1-233A |
| Display: | Fuser Unit Failure: #U1-2335. Fuser Unit Failure: #U1-233A. |
| Description: | Fuser Unit Failure: #U1-2335. Fuser Unit Failure: #U1-233A. |
| Causes: | Temperature of the thermistor is abnormally low. |
| Remedy: | • U1–2335 : Error occurs at non-contact type Thermistor • U1–233A : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser uni, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 4) If the problem persists, Check the follows. a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567)or Non-contact type thermistor(1404–001453) is broken. 5) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 6) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U1-2337, U1-233D |
| Display: | Fuser Unit Failure: #U1-2337. Fuser Unit Failure: #U1-233D |
| Description: | Fuser Unit Failure: #U1-2337. Fuser Unit Failure: #U1-233D. |
| Causes: | When the fuser warms-up, the temperature of the thermistor is abnormally low. |
| Remedy: | • U1–2337 : Error occurs at non-contact type Thermistor • U1–233D : Error occurs at contact type Thermistor 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) Check if the power voltage is normal. (Is the voltage during the operation ±10% of the rated voltage?) 3) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 4) If the problem persists, Check the follows. a) Check if the Halogen lamp (110V : 4713–001632 / 220V : 4713–001633) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermistat(4712-001098) is disconnected. d) Check if the contact type thermistor(1404–001567)or Non-contact type thermistor(1404–001453) is broken. 5) If the problem persists, replace the Fuser unit(220V : JC91–01163A / 110V : JC91–01164A). 6) If the problem persists, replace the main board(JC92–02746A) or FDB board(220V : JC44-00211A, 110V : JC44-0021A)or SMPS(220V : JC44-00100C, 110V : JC44-00093C) |
| Error code: | U2-6121, U2-6122, U2-6123 |
| Display: | LSU Failure #U2-6121: Turn off then on. LSU Failure #U2-6122: Turn off then on. LSU Failure #U2-6123: Turn off then on. |
| Description: | LSU Failure #U2-6121: Turn off then on. LSU Failure #U2-6122: Turn off then on. LSU Failure #U2-6123: Turn off then on. |
| Causes: | LSU motor does not operate or it operates abnormally. Motor ready signal is abnormal. |
| Remedy: | 1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up. 2) Print a demo page to check that the machine operates normally. 3) If the problem persists, check the following : a) If the LSU motor makes a sound, i) Enter SVC mode to check the LSU motor ready signal. ( Diagnostics > Engine Diagnostics > Engine Test Routines) ii) Select “LSU Motor1 Run Ready”. ( Diagnostics > Engine Diagnostics > Engine Test Routines > 110-0000) iii) Press ‘Start’ button. Check that the status has changed to ‘Executing -> Low -> High’. iv) If the status has not changed, the motor ready signal is abnormal. Replace the LSU. (JC97-04010A) (Refer to 3.3.5. LSU in chapter 3) b) If the LSU motor does not makes a sound, i) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. Check that the LSU motor make a sound after turning the machine on. ii) Turn the machine off and remove the rear cover. Unplug and reconnect the LSU cable on main board. Check that the LSU motor make a sound after turning the machine on. iii) If the LSU cable is defective, replace it. Check that the LSU motor make a sound after turning the machine on. iv) If the problem persists, replace the LSU(JC97-04010A). |
| Error code: | U2-6142, U2-6143 |
| Display: | LSU Failure #U2-6142: Turn off then on. LSU Failure #U2-6143: Turn off then on. |
| Description: | LSU Failure #U2-6142: Turn off then on. LSU Failure #U2-6143: Turn off then on. |
| Causes: | Hsync signal of the LSU is abnormal. |
| Remedy: | 1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up. 2) Print a demo page to check that the machine operates normally. 3) If the problem persists, check the following : a) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. Print a demo page to check that the machine operates normally. b) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable on main board. Print a demo page to check that the machine operates normally. c) If the LSU cable is defective, replace it. Check that the LSU motor makes a sound after turning the machine on. d) If the problem persists, replace the LSU(JC97-04010A). |
| Error code: | U3-3211, U3-3213, U3-3214, U3-3311, U3-3313, U3-3314 |
| Display: | Original paper jam inside of scanner |
| Description: | Jam has occurred inside the DADF unit. |
| Remedy: | 1) Open the DADF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the DADF regi. sensor(0604-001393) and regi actuator(JC66-03148A). If their operation is abnormal, replace the defective part. 3) If the regi sensor is OK, check the scan sensor(0604-001393) and scan actuator(JC66-03210A). If their operation is abnormal, replace the defective part. 4) Check if the regi. clutch operates normally. Check if the clutch cable is connected correctly. If the clutch(JC47-00033A) is defective, replace it. |
| Error code: | U3-3411, U3-3413, U3-3414 |
| Display: | Original paper jam inside of scanner. |
| Description: | Jam has occurred inside the DADF unit. |
| Causes: | Original jam has occurred around the scan in roller and regi roller. |
| Remedy: | 1) Open the DADF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the following: a) Check if the Regi. actuator(JC66-03148A) operates normally. b) Check if the Regi. sensor cable is connected correctly. c) If the connection is OK, replace the Regi. sensor(0604-001393). |
| Error code: | U3-3511, U3-3513, U3-3514 |
| Display: | Original paper jam inside of scanner. |
| Description: | Original paper jam inside of scanner. |
| Causes: | Jam has occurred inside the DSDF unit. |
| Remedy: | 1) Open the DSDF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the Regi. sensor and Regi actuator. Push and release the regi actuator. Check if the pick up module returns the original position. If the sensor is defective, replace it. 3) If the regi sensor is OK, check the scan 2 sensor and exit sensor. • If the scan 2 sensor is defective, replace it. • If the exit sensor is defective, replace it. |
| Error code: | U3-3711, U3-3713, U3-3714 |
| Display: | Original paper jam in the exit area of scanner |
| Description: | Original jam has occurred inside the DADF unit. |
| Remedy: | 1) Open the DADF cover. If there is a jammed paper, remove it. 2) If this error occurs continually, check the followings. a) Check if the exit actuator(JC66-03184A) operates normally. b) Check if the exit sensor cable is connected correctly. c) If the connection is OK, replace the exit sensor(0604-001393). |
| Error code: | U3-4210 |
| Display: | Top door of scanner is open. |
| Description: | Top door of scanner is open. |
| Causes: | DSDF cover is open. |
| Remedy: | 1) Open and close the DSDF cover. Check if the error message is disappeared. 2) If the problem persists, check the cover open sensor. a) Open the DSDF cover. Remove the spring. b) Remove 4 screws. c) Check if the sensor connector is connected correctly. If the sensor is defective, replace it(0604–001393). |
