Samsung MultiXpress X7600GX
Рейтинг
Снят с производства
Тип устройства
МФУ
Технология печати
лазерная
Макс. формат
A3
Число страниц в месяц
250000
Скорость печати
A4
60
Цветность печати
цветная
Общие характеристики |
|
|---|---|
Цветность печати |
цветная |
Тип устройства |
МФУ |
Число страниц в месяц |
250 000 |
Тип |
лазерный/светодиодный |
Технология печати |
лазерная |
Копир |
|
Сканер |
|
Факс |
|
Телефон |
|
Печать фотографий |
|
Размещение |
напольный |
Макс. формат |
A3 |
Область применения |
большой офис |
Принтер |
|
Макс, ширина отпечатка |
297 |
Макс, длина отпечатка |
420 |
Двусторонняя печать |
|
Количество цветов |
4 |
Пигментные чернила |
|
Печать без полей |
|
Макс, разрешение для ч/б печати |
|
| По Y | 1 200 |
| По X | 1 200 |
Скорость ч/б печати |
|
| A4 | 60 |
| A4 | 50 |
Время выхода первого отпечатка |
|
| Ч/б | 7,2 |
| Цветн, | 8,9 |
Копир |
|
Время выхода первой копии |
5,1 |
Макс, количество копий за цикл |
9 999 |
Шаг масштабирования |
0,01 |
Значение масштаба |
|
| Минимальное | 0,25 |
| Максимальное | 4 |
Макс, разрешение (ч/б) |
|
| По Y | 600 |
| По X | 600 |
Скорость ч/б копирования |
|
| A3 | 31 |
Сканер |
|
Слайд-адаптер |
|
Емкость устройства автоподачи оригиналов |
100 |
Устройство автоподачи оригиналов |
двустороннее |
Макс. формат оригинала |
A3 |
Тип сканера |
планшетный/протяжный |
Макс, размер сканирования |
|
| По X | 297 |
| По Y | 420 |
Скорость сканирования |
|
| Ч/б | 120 |
| Цветн, | 120 |
Расходные материалы |
|
Ресурс ч/б картриджа/тонера |
45 000 |
Количество картриджей |
4 |
Ресурс цветного картриджа/тонера |
30 000 |
Печать на: |
|
| Глянцевой бумаге |
|
| Пленках |
|
| Карточках |
|
| Матовой бумаге |
|
| Этикетках |
|
| Конвертах |
|
| CD/DVD |
|
| Фотобумаге |
|
| Рулоне |
|
Плотность бумаги |
|
| Минимальная | 60 |
| Максимальная | 325 |
Факс |
|
PC Fax |
|
Макс, скорость передачи данных |
33,6 Кбит/с |
Телефон |
|
Беспроводная трубка |
|
Caller ID |
|
Спикерфон |
|
Автоответчик |
|
Стандарт DECT |
|
Проводная трубка |
|
АОН |
|
Языки управления |
|
| PostScript |
|
Лотки |
|
Емкость лотка ручной подачи |
100 |
Подача бумаги |
|
| Стандартная | 520 |
| Максимальная | 6 140 |
Интерфейсы |
|
Ethernet (RJ-45) |
|
USB |
|
Версия USB |
2,0 |
Инфракрасный порт |
|
FireWire (IEEE 1394) |
|
Wi-Fi |
|
Bluetooth |
|
LPT |
|
AirPrint |
|
RS-232 |
|
Устройство для чтения карт памяти |
|
Память/Процессор |
|
Емкость жесткого диска |
320 |
Процессор |
A3000 |
Частота процессора |
1 500 |
Дополнительная информация |
|
Экран |
|
Диагональ дисплея |
10,1 |
Работа от аккумулятора |
|
Поддержка ОС |
|
| Windows |
|
| Mac OS |
|
Потребляемая мощность |
|
| В режиме ожидания | 59 |
| При работе | 1 300 |
Уровень шума |
|
| В режиме ожидания | 30 |
| При работе | 61 |
Габариты |
|
Глубина |
878 |
Ширина |
566 |
Вес |
108 |
Высота |
610 |
Модули
FRAME-REAR ASSY COLOR
DSDF-COVER OPEN
DSDF
COVER-SIDE EXIT and COVER-SIDE TAKEAWAY
FRAME-MAIN REGI
COVER
MP
TRANSFER-T2
CASSETTE-2ND
COVER-SIDE
FRAME-MAIN ASSY COLOR
DSDF-PICK UP UPPER
FRAME-GUIDE TONER YMC and K
CASSETTE-1ST
DRIVE
MAIN
PLATEN
DSDF-STACKER
FRAME ACR ASSY
FRAME MAIN-PICKUP 1 and 2
COVER-SIDE GUIDE
PLATEN-LOWER
DSDF-FRAME MAIN
FRAME-MAIN PICK UP
Exit
Детали DSDF-FRAME MAIN
| Деталь: | FRAME MAIN-REAR HOLDER AUTOSIZE, CLX-9350 |
| Парткод: | JC93-00018A |
| Деталь: | FRAME MAIN-HUMIDITY SENSOR, CLX-9201,SEC, |
| Парткод: | JC93-00486A |
| Деталь: | HOLDER-MODULAR, ABS,BLACK,HF-0660i |
| Парткод: | JC61-06951A |
| Деталь: | FRAME-HANDLE ASSY, X7600,SEC,WORLD |
| Парткод: | JC93-01038A |
| Деталь: | PBA-PAPER SIZE SENSOR, CLX-9352NA,SEC,FR1 |
| Парткод: | JC92-02622A |
| Деталь: | DSDF-COVER OPEN, X7600 |
| Парткод: | JC97-04645A |
| Деталь: | DSDF-COVER OPEN UPPER, X7600 |
| Парткод: | JC97-04695A |
| Деталь: | DSDF-COVER OPEN LOWER, X7600 |
| Парткод: | JC97-04696A |
| Деталь: | LATCH-HANDLE R, X7600,POM,30.5,29.63,BLAC |
| Парткод: | JC66-04854A |
| Деталь: | LATCH-HANDLE F, X7600,POM,30.5,29.59,BLAC |
| Парткод: | JC66-04853A |
| Деталь: | SPRING-ES, SUS,CD0.65,L30,OD5.45,RIGHT,RE |
| Парткод: | 6107-003406 |
| Деталь: | COVER-OPEN UPPER, X7600,ABS,SPLIT BROWN B |
| Парткод: | JC63-05212A |
| Деталь: | HANDLE-COVER OPEN, X7600,ABS,HF-0660I,SPL |
| Парткод: | JC64-01005A |
| Деталь: | DSDF-PRE REGI PINCH ROLLER, X7600 |
| Парткод: | JC97-04667A |
| Деталь: | DSDF-PICK UP FEED ROLLER, X7600 |
| Парткод: | JC97-04665A |
| Деталь: | BRACKET-OPEN RELEASE F, X7600,STS304,1.2, |
| Парткод: | JC61-07630A |
| Деталь: | HOLDER-SPRING PRE REGI, X7600,ABS,2.0T,29 |
| Парткод: | JC61-07670A |
| Деталь: | DSDF-MSO, X7600 |
| Парткод: | JC97-04664A |
| Деталь: | SPRING CS, X7600,STS304,1.0,10.5,12.5,22. |
| Парткод: | JC61-07733A |
| Деталь: | COVER-OPEN LOWER, X7600,ABS,SPLIT BROWN B |
| Парткод: | JC63-05211A |
| Деталь: | PHOTO-INTERRUPTER, DIODE,DIP |
| Парткод: | 0604-001381 |
| Деталь: | DSDF-COVER OPEN, X7600 |
| Парткод: | JC97-04645A |
| Деталь: | DSDF-PICK UP UPPER, X7600 |
| Парткод: | JC97-04646A |
| Деталь: | LINK-COVER OPEN, CLX-9350,POM,1.5,13.99,9 |
| Парткод: | JC66-02270A |
| Деталь: | PBA-WLED INDICATION, X7600,SEC,FR-4,2L,20 |
| Парткод: | JC92-02829A |
| Деталь: | DSDF-COVER FRONT, X7600 |
| Парткод: | JC97-04694A |
| Деталь: | DSDF-DUMMY FRONT, X7600 |
| Парткод: | JC97-04642A |
| Деталь: | BRACKET-STATUS LED, X7600,EGI-SECC,1.2,12 |
| Парткод: | JC61-07635A |
| Деталь: | DSDF-DAMPER, X7600 |
| Парткод: | JC97-04692A |
| Деталь: | DSDF-COVER BOTTOM, X7600 |
| Парткод: | JC97-04643A |
| Деталь: | DSDF-FRAME MAIN, X7600 |
| Парткод: | JC97-04669A |
| Деталь: | COVER-IF HARNESS, X4300,ABS,SPLIT BROWN B |
| Парткод: | JC63-04620A |
| Деталь: | DSDF-STACKER, X7600 |
| Парткод: | JC97-04658A |
| Деталь: | COVER-REAR, X7600,ABS,SPLIT BROWN BLACK,H |
| Парткод: | JC63-05215A |
| Деталь: | COVER-SIDE EXIT, X7600 |
| Парткод: | JC95-01968A |
| Деталь: | COVER-SIDE TAKEAWAY, X7600 |
| Парткод: | JC95-01972A |
| Деталь: | GUIDE-FUSER UPPER, X7600,MPPO,2,365.5,56. |
| Парткод: | JC61-06986A |
| Деталь: | SPRING-TS, SUS304,PI0.25,ID3.8,OD4.3,105 |
| Парткод: | 6107-001737 |
| Деталь: | LEVER ACTUATOR-FUSEROUT, PC,2.5,40.6,66,N |
| Парткод: | JC66-04406A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | HOLDER-FUSER SNR, X7600,PC,1.5,45.5,29.2, |
| Парткод: | JC61-06910A |
| Деталь: | GUIDE-TAKEAWAY UPPER, X7600,ABS+PC,2.5,37 |
| Парткод: | JC61-06991A |
| Деталь: | PHOTO-INTERRUPTER, PHOTO DIODE,SNAP IN |
| Парткод: | 0604-001490 |
| Деталь: | ROLLER IDLE-IDLE TAKE AWAY, CLX-9350,POM, |
| Парткод: | JC66-02384A |
| Деталь: | SPRING-CS, SUS304,0.8,22.6,8.1,FREE,CLOSE |
| Парткод: | 6107-003051 |
| Деталь: | FRAME MAIN-REGI, K7600 |
| Парткод: | JC93-01200A |
| Деталь: | SHAFT-REGI, X7600,SUM23,8,STEEL |
| Парткод: | JC66-04665A |
| Деталь: | ROLLER FEED-REGI M, K7600,EPDM,SUM23 |
| Парткод: | JC66-04766A |
| Деталь: | HARNESS-REGI, X7600,UL10272,100,GRAY/BLK, |
| Парткод: | JC39-02204A |
| Деталь: | PHOTO-INTERRUPTER, DIODE,DIP |
| Парткод: | 0604-001381 |
| Деталь: | GEAR-ROLLER REGI, X7600,POM,M0.8/0.95,NAT |
| Парткод: | JC66-04447A |
| Деталь: | GEAR-ROLLER REGI IDLE, X7600,POM,M0.95,NA |
| Парткод: | JC66-04446A |
| Деталь: | FRAME MAIN-HOLDER ARM REGI, X7600 |
| Парткод: | JC93-01074A |
| Деталь: | HOLDER-SHAFT ARM, X7600,POM,7.7,BLACK,F25 |
| Парткод: | JC61-06887A |
| Деталь: | FRAME MAIN-GUIDE REGI UPPER, X7600 |
| Парткод: | JC93-01075A |
| Деталь: | COVER-FRONT, X7600,SEC |
| Парткод: | JC95-01956A |
| Деталь: | COVER-INNER, X7600,SEC |
| Парткод: | JC95-01957A |
| Деталь: | COVER-SCAN FRONT, X7600,SEC |
| Парткод: | JC95-01962A |
| Деталь: | COVER-MIDDLE RIGHT, X7600,ABS,T2.5,SEC,SP |
| Парткод: | JC63-04841A |
| Деталь: | COVER-FRONT LOWER, X7600,ABS,T2.5,SEC,SPL |
| Парткод: | JC63-04861A |
| Деталь: | COVER-MIDDLE LEFT, X7600,ABS,T2.2,SEC,SPL |
| Парткод: | JC63-04842A |
| Деталь: | COVER-EXIT, X7600,SEC |
| Парткод: | JC95-01960A |
| Деталь: | BRACKET-PBA HUB, X7600,EGI-SECC,T1.0,SEC, |
| Парткод: | JC61-06704A |
| Деталь: | COVER-SCAN LEFT, X7600,ABS,T2.5,SEC,SPLIT |
| Парткод: | JC63-04858A |
| Деталь: | COVER-LEFT UPPER, X7600,ABS,T2.2,SEC,SPLI |
| Парткод: | JC63-04837A |
| Деталь: | COVER-EXIT REAR, X7600,ABS,T2.5,SEC,SPLIT |
| Парткод: | JC63-04840A |
| Деталь: | BRACKET-OPE 2, X7600,EGI-SECC,T1.2,SEC,PR |
| Парткод: | JC61-06730A |
| Деталь: | FRAME-EXIT FAN ASSY, X7600,SEC,WORLD |
| Парткод: | JC93-01027A |
| Деталь: | COVER-SCAN RIGHT, X7600,ABS,T2.5,SEC,SPLI |
| Парткод: | JC63-04860A |
| Деталь: | COVER-DUMMY TABLE, CLX-9201,ABS,T2,W161.9 |
| Парткод: | JC63-03399A |
| Деталь: | COVER-RIGHT FRONT, X7600,ABS,T2.5,SEC,SPL |
| Парткод: | JC63-04847A |
| Деталь: | COVER-RIGHT REAR, X7600,SEC |
| Парткод: | JC95-01961A |
| Деталь: | COVER-REAR LOWER, X7600,ABS,T2.5,SEC,SPLI |
| Парткод: | JC63-04850A |
| Деталь: | COVER-REAR UPPER, X7600,ABS,T2.5,SEC,SPLI |
| Парткод: | JC63-04849A |
| Деталь: | COVER-REAR UPPER DUMMY, X4300,ABS,T 2.5,S |
| Парткод: | JC63-04528A |
| Деталь: | COVER-REAR DUMMY, X7600,ABS,T2.0,SEC,SPLI |
| Парткод: | JC63-04863A |
| Деталь: | COVER-SCAN REAR, X7600GX,ABS,2.5,G32690,H |
| Парткод: | JC63-04859B |
| Деталь: | COVER-DOOR, X7600,SEC |
| Парткод: | JC95-01958A |
| Деталь: | COVER-LEFT, X7600,SEC |
| Парткод: | JC95-01959A |
| Деталь: | COVER-LEFT TOP, X7600,ABS,T2.5,SEC,SPLIT |
| Парткод: | JC63-04862A |
| Деталь: | MP-TRAY, X7600 |
| Парткод: | JC90-01357A |
| Деталь: | MP-GUIDE MAIN, X7600 |
| Парткод: | JC90-01354A |
| Деталь: | COVER-GUIDE, X7600,ABS,SPLIT GRAY |
| Парткод: | JC63-04911A |
| Деталь: | MP-GUIDE FEED, X7600 |
| Парткод: | JC90-01353A |
| Деталь: | HOLDER-TRAY HINGE, X7600,PC,BLACK,NH-1035 |
| Парткод: | JC61-07064A |
| Деталь: | GEAR-IDLE MP, X7600,POM,1.0,26,NATURAL (W |
| Парткод: | JC66-04508A |
| Деталь: | GEAR-FORWARD, X7600,POM,1.0,27,NATURAL (W |
| Парткод: | JC66-04507A |
| Деталь: | GEAR-FEED, X7600,POM,1.0,20,NATURAL (WHIT |
| Парткод: | JC66-04506A |
| Деталь: | BRACKET-SOLENOID, CLX-9201,EGI-SECC,0.6T, |
| Парткод: | JC61-04753A |
| Деталь: | FRAME-MAIN PICK UP ROLLER, CLX-9201,0,USA |
| Парткод: | JC93-00540B |
| Деталь: | MP-BRACKET PICKUP, X7600 |
| Парткод: | JC90-01355A |
| Деталь: | SOLENOID-MP, CLX-9350,DC24V,18.4,2730, |
| Парткод: | JC33-00029B |
| Деталь: | ROLLER FEED-MP, X7600,EPDM,SUS,8 |
| Парткод: | JC66-04626A |
| Деталь: | GEAR-IDLE PICKUP, X7600,POM,0.7,32,NATURA |
| Парткод: | JC66-04509A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | LEVER ACTUATOR-EMPTY, X7600,PC,NH-1035,BL |
| Парткод: | JC66-04459A |
| Деталь: | MP-ONE WAY, CLX-9350,SEC,-,-,- |
| Парткод: | JC90-00918A |
| Деталь: | GEAR-M PU, CLX-9201,POM,0.7,21,16.1 |
| Парткод: | JC66-03213A |
| Деталь: | LEVER-LOCKER STOPPER, X7600,POM,NW-02,NAT |
| Парткод: | JC66-04464A |
| Деталь: | LEVER-STOPPER PAPER, X7600,POM,F20-02,NAT |
| Парткод: | JC66-04463A |
| Деталь: | TRANSFER-T2, SL-X7600 |
| Парткод: | JC93-01078A |
| Деталь: | TRANSFER-ROLLER T2, SL-X7600 |
| Парткод: | JC93-01080A |
| Деталь: | TRANSFER-HOUSING T2, SL-X7600 |
| Парткод: | JC93-01079A |
| Деталь: | ROLLER TR-T2, X7600,24,POLYURETHANE FOAM, |
| Парткод: | JC66-04495A |
| Деталь: | BEARING BALL, 688ZZ,ID8,OD16,L5,SUJ2/SUS3 |
| Парткод: | 6601-001341 |
| Деталь: | PLATE-SAW, X7600,STS304,0.1,SAW |
| Парткод: | JC61-07065A |
| Деталь: | HOLDER-TR ROLLER, X7600,ABS+PC,2,26.21,35 |
| Парткод: | JC61-06930A |
| Деталь: | GUIDE-T2 UPPER, X7600,ABS+PC,2.5,85.2,324 |
| Парткод: | JC61-07479A |
| Деталь: | HOUSING-T2, X7600,ABS+PC,2,357,3,138.05,B |
| Парткод: | JC61-07482A |
| Деталь: | GUIDE-T2 LOWER, X7600,ABS+PC,2,57,345,45, |
| Парткод: | JC61-06933A |
| Деталь: | ARM-T2 F, X7600,ABS+GF,2.5,13,45.5,BLACK |
| Парткод: | JC66-04650A |
| Деталь: | ARM-T2 R, X7600,ABS+GF,2.5,13,45.5,BLACK |
| Парткод: | JC66-04471A |
| Деталь: | CASSETTE-2ND, X7600 |
| Парткод: | JC90-01359A |
| Деталь: | CASSETTE FRAME-2ND, X7600 |
| Парткод: | JC90-01361A |
| Деталь: | CASSETTE SUB-COVER 2ND, X7600 |
| Парткод: | JC90-01366A |
| Деталь: | GUIDE-LEFT, X7600,ABS,HF-0660I,ICE GREEN, |
| Парткод: | JC61-07028A |
| Деталь: | BRACKET-KNOCK UP, X7600,EGI-SECC,1.0T,396 |
| Парткод: | JC61-06820A |
| Деталь: | SEAL-PAD CST, CLX-9201,CIGAL,BLK,0.7,47,1 |
| Парткод: | JC62-00946A |
| Деталь: | CASSETTE SUB-GUIDE REAR 2ND, X7600 |
| Парткод: | JC90-01368A |
| Деталь: | CASSETTE SUB-BRACKER LIFT, X7600 |
| Парткод: | JC90-01363A |
| Деталь: | LEVER-LINK SIZE 2ND, X7600,ABS,5,21.2,273 |
| Парткод: | JC66-04325A |
| Деталь: | LEVER-SIZE SIDE, X7600,ABS,157.46,52.6,CM |
| Парткод: | JC66-04347A |
| Деталь: | BRACKET-RAIL RIGHT, X7600,EGI-SECC,0.8T,2 |
| Парткод: | JC61-06812A |
| Деталь: | BRACKET-LEVER LIFTING, X7600,EGI-SECC,1.6 |
| Парткод: | JC61-06822A |
| Деталь: | GEAR-M_PINION 24, SCX-6345N/XRX,POM,1,24, |
| Парткод: | JC66-01020A |
| Деталь: | CASSETTE SUB-GUIDE FRONT 2ND, X7600 |
| Парткод: | JC90-01367A |
| Деталь: | FRAME-CASSETTE 2ND, X7600,ABS,SPLIT GRAY, |
| Парткод: | JC61-06891A |
| Деталь: | MP, X7600 |
| Парткод: | JC90-01352A |
| Деталь: | COVER-FRONT MP, X7600,ABS,SPLIT GRAY |
| Парткод: | JC63-04910A |
| Деталь: | COVER-DUMMY LCT, X7600,ABS,2.3,334.1,28.1 |
| Парткод: | JC63-04918A |
| Деталь: | COVER-SIDE, X7600,ABS,2.5,494.7,461.2,SPL |
| Парткод: | JC63-04920A |
| Деталь: | COVER-SIDE UP, X7600,ABS,2.5,494.2,164.8, |
| Парткод: | JC63-04916A |
| Деталь: | COVER-HARNESS LOWER, X7600,ABS,1.5,206.3, |
| Парткод: | JC63-04917A |
| Деталь: | COVER-HARNESS, X7600,ABS,1.5,SPLIT GRAY,C |
| Парткод: | JC63-04915A |
| Деталь: | COVER-SIDE LINK, X7600 |
| Парткод: | JC95-01970A |
| Деталь: | LINK-SIDE, X7600,POM,92.3,2.0,NATURAL |
| Парткод: | JC66-04400A |
| Деталь: | LOCKER-SIDE REAR, CLX-9201,POM,NATURAL,60 |
| Парткод: | JC64-00711A |
| Деталь: | DRIVE-MOTOR STEP, X7600,K7600 |
| Парткод: | JC93-01085A |
| Деталь: | BELT-TIMING GEAR, 40S2M130,RUB,W4.0,L130, |
| Парткод: | 6602-001730 |
| Деталь: | COVER-HARNESS DUMMY, X7600,ABS,1.5,50.8,4 |
| Парткод: | JC63-04921A |
| Деталь: | SPRING TS, X7600,PWB-SWPB,2.8,15.0,20.6 |
| Парткод: | JC61-07372A |
| Деталь: | ROLLER FEED-DUPLEX1, X7600,EPDM,SUM22,6 |
| Парткод: | JC66-04628A |
| Деталь: | HANDLE-SIDE, X7600,ABS,2.5,83,54.1,HF-066 |
| Парткод: | JC64-00991A |
| Деталь: | TRANSFER-T2, SL-X7600 |
| Парткод: | JC93-01078A |
| Деталь: | COVER-SIDE TAKEAWAY, X7600 |
| Парткод: | JC95-01972A |
| Деталь: | COVER-SIDE EXIT, X7600 |
| Парткод: | JC95-01968A |
| Деталь: | GUIDE-DUPLEX UPPER, X7600,ABS+PC,2.5,387. |
| Парткод: | JC61-06985A |
| Деталь: | GUIDE-DUPLEX LOWER, X7600,ABS+PC,2,353.8, |
| Парткод: | JC61-06989A |
| Деталь: | GUIDE-DUPLEX ENTRANCE, X7600,ABS+PC,2.5,3 |
| Парткод: | JC61-06987A |
| Деталь: | BELT-TIMING GEAR, 40S2M304,RUBBER,W4.0,L3 |
| Парткод: | 6602-003183 |
| Деталь: | COVER-SIDE GUIDE, X7600 |
| Парткод: | JC95-01969A |
| Деталь: | ROLLER FEED-DUPLEX2, X7600,EPDM,SUM22,6 |
| Парткод: | JC66-04629A |
| Деталь: | GUIDE-TAKEAWAY LOWER, X7600,ABS+PC,2.3,38 |
| Парткод: | JC61-06992A |
| Деталь: | BRACKET-REAR SIDE, X7600,EGI-SECC,1.0T,51 |
| Парткод: | JC61-07015A |
| Деталь: | BRACKET-FRONT SIDE, X7600,EGI-SECC,1.0T,5 |
| Парткод: | JC61-07014A |
| Деталь: | LEVER-LINK D, X7600,PC,2,46,168.7,NH-1035 |
| Парткод: | JC66-04398A |
| Деталь: | LOCKER-SIDE, CLX-9201,POM,NATURAL,60.5,F2 |
| Парткод: | JC64-00710A |
| Деталь: | FRAME MAIN-SWITCH OPEN, SCX-8128NA,SEC,WO |
| Парткод: | JC93-00466A |
| Деталь: | FRAME-GUIDE DEVE ASSY C, X7600,SEC,WORLD |
| Парткод: | JC93-01020A |
| Деталь: | FRAME-HOLDER LSU ASSY C, X7600,SEC,WORLD |
| Парткод: | JC93-01021A |
| Деталь: | FRAME-HOLDER HVPS ASSY C, X7600,SEC,WORLD |
| Парткод: | JC93-01022A |
| Деталь: | FRAME-ACR ASSY, X7600,SEC,WORLD |
| Парткод: | JC93-01039A |
| Деталь: | FRAME-FUSER ASSY C, X7600,SEC,WORLD |
| Парткод: | JC93-01031A |
| Деталь: | FRAME MAIN-REGI, K7600 |
| Парткод: | JC93-01200A |
| Деталь: | FRAME MAIN-AUTO CLOSING, X7600 |
| Парткод: | JC93-01095A |
| Деталь: | FRAME-DUCT DEVE ASSY C, X7600,SEC,WORLD |
| Парткод: | JC93-01035A |
| Деталь: | FRAME-BASE ASSY, X7600,SEC,WORLD |
| Парткод: | JC93-01030A |
| Деталь: | FRAME-REAR ASSY COLOR, X7600,SEC,WORLD |
| Парткод: | JC93-01032A |
| Деталь: | FRAME-FRONT ASSY COLOR, X7600,SEC,WORLD |
| Парткод: | JC93-01037A |
| Деталь: | FRAME-GUIDE TONER YMC, SL X7600 |
| Парткод: | JC93-01089A |
| Деталь: | FRAME-GUIDE TONER BLACK, SL X7600 |
| Парткод: | JC93-01088A |
| Деталь: | DSDF-PICK UP UPPER, X7600 |
| Парткод: | JC97-04646A |
| Деталь: | DSDF-COVER PICK UP, X7600 |
| Парткод: | JC97-04647A |
| Деталь: | DSDF-PICK UP, X7600 |
| Парткод: | JC97-04648A |
| Деталь: | DSDF-PICK UP SUB, X7600 |
| Парткод: | JC97-04650A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | HOLDER-HARNESS PICKUP, X7600,ABS,1.5,66.9 |
| Парткод: | JC61-07614A |
| Деталь: | LINK-PICK UP, X7600,POM,20,6.5,BLACK |
| Парткод: | JC66-04840A |
| Деталь: | PHOTO-INTERRUPTER, DIODE,DIP |
| Парткод: | 0604-001381 |
| Деталь: | SPRING ES, X7600,STS304,0.35,4.3,5.0,20.8 |
| Парткод: | JC61-07731A |
| Деталь: | DSDF-BRACKET PICK UP, X7600 |
| Парткод: | JC97-04649A |
| Деталь: | CAM-PICK UP UPPER, X7600,POM,5,11.6,BLACK |
| Парткод: | JC66-04882A |
| Деталь: | FRAME-GUIDE TONER YMC, SL X7600 |
| Парткод: | JC93-01089A |
| Деталь: | FRAME-GUIDE TONER BLACK, SL X7600 |
| Парткод: | JC93-01088A |
| Деталь: | CARTRIDGE SUB-RESERVOIR YMCK, SL-X7600 |
| Парткод: | JC96-09832A |
| Деталь: | SEAL-RESERVE, SL-X7600,PUR FOAM,2,HS-WB |
| Парткод: | JC62-01300A |
| Деталь: | SEAL-DISP, SL-X7600,PUR FOAM,Natural,2.0, |
| Парткод: | JC62-01315A |
| Деталь: | SHUTTER-DUCT TONER, SL-X7600,POM,F25-03HT |
| Парткод: | JC64-00981A |
| Деталь: | GUIDE-TONER YMC, SL-X7600,ABS,HF-0660i,Bl |
| Парткод: | JC61-06870A |
| Деталь: | GUIDE-TONER BLACK, SL-X7600,ABS,HF-0660i, |
| Парткод: | JC61-06869A |
| Деталь: | CASSETTE-1ST, X7600 |
| Парткод: | JC90-01358A |
| Деталь: | CASSETTE FRAME-1ST, X7600 |
| Парткод: | JC90-01360A |
| Деталь: | CASSETTE SUB-COVER 1ST, X7600 |
| Парткод: | JC90-01362A |
| Деталь: | GUIDE-LEFT 1ST, X7600,ABS,HF-0660I,ICE GR |
| Парткод: | JC61-07029A |
| Деталь: | BRACKET-KNOCK UP 1ST, X7600,EGI-SECC,1.0T |
| Парткод: | JC61-06821A |
| Деталь: | SEAL-PAD CST, CLX-9201,CIGAL,BLK,0.7,47,1 |
| Парткод: | JC62-00946A |
| Деталь: | CASSETTE SUB-GUIDE REAR 1ST, X7600 |
| Парткод: | JC90-01365A |
| Деталь: | CASSETTE SUB-BRACKER LIFT, X7600 |
| Парткод: | JC90-01363A |
| Деталь: | LEVER-LINK SIZE 1ST, X7600,ABS,5,HF-0660I |
| Парткод: | JC66-04324A |
| Деталь: | LEVER-SIZE SIDE 1ST, X7600,ABS,158.7,61.1 |
| Парткод: | JC66-04348A |
| Деталь: | BRACKET-RAIL RIGHT, X7600,EGI-SECC,0.8T,2 |
| Парткод: | JC61-06812A |
| Деталь: | BRACKET-LEVER LIFTING, X7600,EGI-SECC,1.6 |
| Парткод: | JC61-06822A |
| Деталь: | GEAR-M_PINION 24, SCX-6345N/XRX,POM,1,24, |
| Парткод: | JC66-01020A |
| Деталь: | CASSETTE SUB-GUIDE FRONT 1ST, X7600 |
| Парткод: | JC90-01364A |
| Деталь: | FRAME-CASSETTE 1ST, X7600,ABS,SPLIT GRAY, |
| Парткод: | JC61-06890A |
| Деталь: | DRIVE MAIN, X7600 |
| Парткод: | JC93-01059A |
| Деталь: | DRIVE-TONER, X7600 |
| Парткод: | JC93-01065A |
| Деталь: | DRIVE FUSER-EXIT, X7600,K7600 |
| Парткод: | JC93-01064A |
| Деталь: | DRIVE-FEED, X7600,K7600 |
| Парткод: | JC93-01062A |
| Деталь: | DRIVE-PICKUP, X7600,K7600 |
| Парткод: | JC93-01063A |
| Деталь: | DRIVE-ENGAGE T1, X7600 |
| Парткод: | JC93-01068A |
| Деталь: | DRIVE-WTB, X7600 |
| Парткод: | JC93-01070A |
| Деталь: | DRIVE-REGI, X7600,K7600 |
| Парткод: | JC93-01061A |
| Деталь: | DRIVE MAIN-COMMON, X7600 |
| Парткод: | JC93-01048A |
| Деталь: | MOTOR BLDC, 48M843K120,6002500rpm,24V,1. |
| Парткод: | JC31-00123E |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | MOTOR CIRCUIT-STEP, CLX-3170,24V |
| Парткод: | JC31-00110A |
| Деталь: | HUB CLUTCH-LATCH-T, POM,10.5,10.5,11.3,NW |
| Парткод: | JC66-02702A |
| Деталь: | MOTOR BLDC, DC 24V,2.0A,25W,ML-3700,TYPE2 |
| Парткод: | JC31-00144A |
| Цена: | 3 200 ₽ |
| Деталь: | DRIVE-MOTOR STEP, X7600,K7600 |
| Парткод: | JC93-01084A |
| Деталь: | BELT-TIMING GEAR, RUBBER,T1.36,L168MM,BLK |
| Парткод: | 6602-001581 |
| Деталь: | MOTOR STEP 1P, CLX-9350,HB,2,3.4V,1677 |
| Парткод: | JC31-00132A |
| Деталь: | CLUTCH-ELECTRIC, 5,32,1,120mA,200Ohm |
| Парткод: | JC47-00037A |
| Деталь: | BELT-TIMING GEAR, 40S2M130,RUB,W4.0,L130, |
| Парткод: | 6602-001730 |
| Деталь: | GEAR-DRIVE FEED, X7600,POM,M1.0/0.8,NATUR |
| Парткод: | JC66-04445A |
| Деталь: | GEAR-RDCN PULLEY FEED, X7600,POM,M1.0,NAT |
| Парткод: | JC66-04444A |
| Деталь: | DRIVE-MOTOR STEP, X7600,K7600 |
| Парткод: | JC93-01083A |
| Деталь: | GEAR-DRIVE PICKUP, X7600,POM,M0.4/0.8,NAT |
| Парткод: | JC66-04449A |
| Деталь: | GEAR-RDCN LIFT A, X7600,POM,M1.0,BLACK,F2 |
| Парткод: | JC66-04356A |
| Деталь: | GEAR-RDCN LIFT, X7600,POM,M0.4,BLACK,F25- |
| Парткод: | JC66-04355A |
| Деталь: | MOTOR CIRCUIT-STEP, M35SP-12N,CLX-9350,0. |
| Парткод: | JC31-00110B |
| Деталь: | GEAR-DRIVE ENGAGE T1, X7600,POM,M0.6/1.0, |
| Парткод: | JC66-04378A |
| Деталь: | GEAR-RDCN WTB, X7600,POM,M0.4/1.5,BLACK,F |
| Парткод: | JC66-04379A |
| Деталь: | GEAR-RDCN PULLEY REGI, X7600,POM,M0.8,NAT |
| Парткод: | JC66-04443A |
| Деталь: | CASSETTE-1ST, X7600 |
| Парткод: | JC90-01358A |
| Деталь: | CASSETTE-2ND, X7600 |
| Парткод: | JC90-01359A |
| Деталь: | COVER, X7600GX,SEC |
| Парткод: | JC95-02014A |
| Деталь: | OPE, K7600,SEC |
| Парткод: | JC97-04499C |
| Деталь: | HVPS, 24V,21.6V26.4V,MAX 7KV,MAX-2.5KV,6 |
| Парткод: | JC44-00240A |
| Деталь: | LSU, X7600,SEC,Quad,A3,1200,A3-C1,780nm Q |
| Парткод: | JC97-04575A |
| Деталь: | FRAME-LSU FAN ASSY, X7600,SEC,WORLD |
| Парткод: | JC93-01019A |
| Деталь: | CARTRIDGE-DEVE UNIT Y, SL-X7600,EXP |
| Парткод: | JC96-09837A |
| Деталь: | CARTRIDGE-DEVE UNIT M, SL-X7600,EXP |
| Парткод: | JC96-09838A |
| Деталь: | CARTRIDGE-DEVE UNIT C, SL-X7600,EXP |
| Парткод: | JC96-09839A |
| Деталь: | CARTRIDGE-DEVE UNIT K, SL-X7600,EXP |
| Парткод: | JC96-09840A |
| Деталь: | FRAME-HOLDER DUST ASSY-TF, X7600,SEC,WORL |
| Парткод: | JC93-01026A |
| Деталь: | TRANSFER-ITB, SL-X7600 |
| Парткод: | JC93-00984A |
| Деталь: | FRAME-EXIT FAN ASSY, X7600,SEC,WORLD |
| Парткод: | JC93-01027A |
| Деталь: | PLATEN, X4300,SCANNER |
| Парткод: | JC97-04520A |
| Деталь: | SPONGE-WHITE SHEET, X7600,PUR FOAM,BLACK |
| Парткод: | JC63-05238A |
| Деталь: | DSDF, X7600 |
| Парткод: | JC97-04662A |
| Деталь: | EXIT, X7600 |
| Парткод: | JC90-01369A |
| Деталь: | FUSER, K7600,SEC,WORLD,230V |
| Парткод: | JC91-01194A |
| Деталь: | FRAME MAIN-PICKUP 1ST, X7600 |
| Парткод: | JC93-01096A |
| Деталь: | FRAME MAIN-PICKUP 2ND, X7600 |
| Парткод: | JC93-01104A |
| Деталь: | COVER-SIDE COLOR, X7600,COLOR |
| Парткод: | JC95-01986A |
| Деталь: | DRIVE-PICKUP, X7600,K7600 |
| Парткод: | JC93-01063A |
| Деталь: | DRIVE-ENGAGE T1, X7600 |
| Парткод: | JC93-01068A |
| Деталь: | DRIVE-TONER, X7600 |
| Парткод: | JC93-01065A |
| Деталь: | DRIVE-REGI, X7600,K7600 |
| Парткод: | JC93-01061A |
| Деталь: | DRIVE-FEED, X7600,K7600 |
| Парткод: | JC93-01062A |
| Деталь: | DRIVE FUSER-EXIT, X7600,K7600 |
| Парткод: | JC93-01064A |
| Деталь: | SMPS-FUSER POWER FDB V2, K7600,X7600/K760 |
| Парткод: | JC44-00236A |
| Деталь: | SMPS-V2, K7600,PSPN2 TYPE5-V2,AC-DC,220V- |
| Парткод: | JC44-00100D |
| Деталь: | SMPS-V2, M4580,PSPN2-TYPE4-V2,AC-DC,220V |
| Парткод: | JC44-00092D |
| Деталь: | SHIELD-MAIN LOWER, SL-X7600,EGI-SECC,0.8, |
| Парткод: | JC63-04897A |
| Деталь: | SHIELD-SMPS LOWER, SL-X7600,EGI-SECC,0.8, |
| Парткод: | JC63-04896A |
| Деталь: | FRAME-DUCT FUSER ASSY C, X7600,SEC,WORLD |
| Парткод: | JC93-01034A |
| Деталь: | DRIVE MAIN, X7600 |
| Парткод: | JC93-01059A |
| Деталь: | PBA-MAIN_GX, X7600,SEC,MAIN_GX,FR4, 6Laye |
| Парткод: | JC92-02737B |
| Деталь: | FAN-TYPE 6, 120mA,4.00mmH20,0.424m3/mi |
| Парткод: | JC31-00160C |
| Деталь: | CARTRIDGE-WTB COLOR, X7600,SEC,880g |
| Парткод: | JC96-09590A |
| Деталь: | DRIVE-WTB, X7600 |
| Парткод: | JC93-01070A |
| Деталь: | GUIDE-RETURN PATH, ABS+PC,230NH,BLACK,GUI |
| Парткод: | JC61-07088A |
| Деталь: | MEA UNIT-HOLDER HDD, SCX-6345N/XRX,XEROX, |
| Парткод: | JC97-02276A |
| Деталь: | HDD, 320G,HTS543232A7A384,S63,H16,C16383, |
| Парткод: | JC59-00035A |
| Деталь: | FRAME MAIN-CASSETTE HEATER, X4300,SEC,220 |
| Парткод: | JC93-01181A |
| Деталь: | TRANSFER-ITB CLEANER, SL-X7600 |
| Парткод: | JC93-00986A |
| Деталь: | TRANSFER-ITB BELT, SL-X7600 |
| Парткод: | JC93-00985A |
| Деталь: | EXIT-SECOND EXIT, X7600 |
| Парткод: | JC90-01373A |
| Деталь: | EXIT-1ST, X7600 |
| Парткод: | JC90-01370A |
| Деталь: | EXIT-BRACKER 2ND, X7600 |
| Парткод: | JC90-01376A |
| Деталь: | BRACKET-FRONT 2ND EXIT, X7600,EGI-SECC,1. |
| Парткод: | JC61-07091A |
| Деталь: | FAN-TYPE 7, 24 V,170mA,3.5mmH20,0.948m3/ |
| Парткод: | JC31-00161B |
| Деталь: | HEATER, Ni, Cr, Al,340x50mm,4.2mm,220V 10 |
| Парткод: | 6204-000125 |
| Деталь: | PLATEN-GLASS SCAN, X4300,SCANNER |
| Парткод: | JC97-04522A |
| Деталь: | PBA-SCAN JOINT, X4300,SEC,FR-4,4L,12745m |
| Парткод: | JC92-02781A |
| Деталь: | GLASS TEMPERED-SCAN ADF, 337.831.1,4.0T |
| Парткод: | JC01-00101A |
| Деталь: | PLATEN-OPEN SENSOR, X4300,SCANNER |
| Парткод: | JC97-04516A |
| Деталь: | PLATEN-FR, X4300,SCANNER |
| Парткод: | JC97-04510A |
| Деталь: | PLATEN-LOWER, X4300,SCANNER |
| Парткод: | JC97-04515A |
| Деталь: | MOTOR STEP 1P, 17PM-K049-P6WS,HB,2,2.2V,4 |
| Парткод: | JC31-00158A |
| Деталь: | BRACKET-HINGE R, X4300,EGI-SECC,2,64.3,99 |
| Парткод: | JC61-06167A |
| Деталь: | BRACKET-HINGE L, X4300,EGI-SECC,2,64.3,99 |
| Парткод: | JC61-06166A |
| Деталь: | COVER-GLASS RIGHT, X4300,ABS,SPLIT BROWN |
| Парткод: | JC63-04580A |
| Деталь: | COVER-GLASS LEFT, X4300,ABS,SPLIT BROWN B |
| Парткод: | JC63-04579A |
| Деталь: | PLATEN-SHIELD CCD, X4300,SCANNER |
| Парткод: | JC97-04502A |
| Деталь: | DSDF-STACKER, X7600 |
| Парткод: | JC97-04658A |
| Деталь: | DSDF-STACKER UPPER, X7600 |
| Парткод: | JC97-04691A |
| Деталь: | DSDF-LIFT, X7600 |
| Парткод: | JC97-04690A |
| Деталь: | HOLDER-HARNESS HINGE, X7600,ABS,2.0T,53.9 |
| Парткод: | JC61-07663A |
| Деталь: | GEAR-DRIVE LIFT, X7600,POM,0.8,25,BLACK,2 |
| Парткод: | JC66-04844A |
| Деталь: | HOLDER-SCATTER, X7600,PC,1.5T,4,30,3.15,B |
| Парткод: | JC61-07651A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | TRAY-ADF IN LOWER, X7600,ABS+PC,2.5,346.8 |
| Парткод: | JC63-05189A |
| Деталь: | RADF-SCATTER, X4300 |
| Парткод: | JC97-04505A |
| Деталь: | STACKER-GUIDE WIRE, X7600,STS304,1.5,81,1 |
| Парткод: | JC61-07735A |
| Деталь: | HOLDER-SUPPORT HINGE, X7600,PC,8.5,62.84, |
| Парткод: | JC61-07711A |
| Деталь: | STOPPER-COVER, X7600,PC,NH-1035,BLACK(K21 |
| Парткод: | JC61-07716A |
| Деталь: | GUIDE-DOC R, X7600,ABS,HF-0660I,SPLIT BRO |
| Парткод: | JC61-07697A |
| Деталь: | TRAY-ADF IN UPPER, X7600,ABS+PC,3,348.1,3 |
| Парткод: | JC63-05190A |
| Деталь: | GUIDE-DOC L, X7600,ABS,HF-0660I,SPLIT BRO |
| Парткод: | JC61-07696A |
| Деталь: | TRAY-ADF IN, X7600,ABS,2.5,168.5,129.58,S |
| Парткод: | JC63-05199A |
| Деталь: | GEAR-RACK, X7600,POM,1.0,43,BLACK,185.27, |
| Парткод: | JC66-04849A |
| Деталь: | PHOTO-INTERRUPTER, DIODE,DIP |
| Парткод: | 0604-001381 |
| Деталь: | GEAR-DOC PINION, X7600,POM,1.0,38,BLACK,4 |
| Парткод: | JC66-04847A |
| Деталь: | HOLDER-SENSOR POSITION, X7600,ABS,2.5T,12 |
| Парткод: | JC61-07669A |
| Деталь: | ACTUATOR-PAPER LENGTH, X7600,ABS,36.98,47 |
| Парткод: | JC66-04852A |
| Деталь: | HOLDER-EXTENTION, X7600,ABS,2.5T,134,175, |
| Парткод: | JC61-07657A |
| Деталь: | FRAME-ACR ASSY, X7600,SEC,WORLD |
| Парткод: | JC93-01039A |
| Деталь: | SENSOR-CTD, SENSOR-CTD,0 60,5V,6.62mA,r |
| Парткод: | JC32-00014A |
| Деталь: | MOTOR DC, NF213G-1020515,DC24V,CLX-8380ND |
| Парткод: | JC31-00078A |
| Цена: | 1 600 ₽ |
| Деталь: | GEAR-CAM ACR, POM,0.6,43,BLACK,F25-03HT |
| Парткод: | JC66-04426A |
| Деталь: | GUIDE-PAPER ACR, ABS+PC,NH-1000T,BLACK,PA |
| Парткод: | JC61-06879A |
| Деталь: | LEVER-ACR, ABS+PC,NH-1000T,BLACK,GUIDE |
| Парткод: | JC66-04401A |
| Деталь: | SHUTTER-ACR, ABS,HF-0660I,BLACK,MOLD |
| Парткод: | JC64-00992A |
| Деталь: | FRAME MAIN-PICKUP 1ST, X7600 |
| Парткод: | JC93-01096A |
| Деталь: | FRAME MAIN-PICKUP 2ND, X7600 |
| Парткод: | JC93-01104A |
| Деталь: | GUIDE-PICKUP UPPER, X7600,ABS+PC,NH-1000T |
| Парткод: | JC61-07022A |
| Деталь: | FRAME MAIN-PICKUP, X7600 |
| Парткод: | JC93-01098A |
| Деталь: | FRAME MAIN-GUIDE PICKUP 1ST, X7600 |
| Парткод: | JC93-01097A |
| Деталь: | SHEET-FEED 1ST, X7600,PE,0.2,440-B |
| Парткод: | JC63-05013A |
| Деталь: | GUIDE-FEED UPPER, X7600,ABS+PC,NH-1000T,B |
| Парткод: | JC61-07020A |
| Деталь: | FRAME MAIN-PICKUP FEED, X7600 |
| Парткод: | JC93-01103A |
| Деталь: | PHOTO-INTERRUPTER, PHOTO DIODE,SNAP IN |
| Парткод: | 0604-001490 |
| Деталь: | GUIDE-FEED LOWER, X7600,ABS+PC,NH-1000T,B |
| Парткод: | JC61-07018A |
| Деталь: | BRACKET-SENSOR FEED, X7600,EGI-SECC,0.8T, |
| Парткод: | JC61-06809A |
| Деталь: | PHOTO-INTERRUPTER, DIODE,DIP |
| Парткод: | 0604-001381 |
| Деталь: | COVER-SIDE GUIDE, X7600 |
| Парткод: | JC95-01969A |
| Деталь: | HOLDER-DUP SNR, X7600,ABS,2,74.12,22.3,BL |
| Парткод: | JC61-06908A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | SPRING-TS, SUS304,PI0.25,ID3.8,OD4.3,105 |
| Парткод: | 6107-001737 |
| Деталь: | LEVER ACTUATOR-DUP, PC,2.6,22.3,57.5,NH-1 |
| Парткод: | JC66-04405A |
| Деталь: | GUIDE-FEED HARNESS, X7600,ABS,1,41.1,16.9 |
| Парткод: | JC61-07099A |
| Деталь: | SPRING-CS, SUS304,PI0.6,L16.6,ID4.7,OD5.9 |
| Парткод: | 6107-001731 |
| Деталь: | ROLLER IDLE-RUBBER-IDLE, SCX-8040ND,POM,S |
| Парткод: | JC66-02289B |
| Деталь: | GUIDE-FEED, X7600,ABS+PC,2.5,382.1,187.6, |
| Парткод: | JC61-06988A |
| Деталь: | HOLDER-ROLLER IDLE, CLX-9350,POM,NATURAL |
| Парткод: | JC61-03098A |
| Деталь: | GUIDE-FEED LOWER, X7600,ABS+PC,2,375,54.3 |
| Парткод: | JC61-06990A |
| Деталь: | PLATEN-FFC CCD, X4300,SCANNER |
| Парткод: | JC97-04509A |
| Деталь: | PLATEN-GUIDE HARNESS, X4300,SCANNER |
| Парткод: | JC97-04512A |
| Деталь: | PLATEN-APS, X4300,SCANNER |
| Парткод: | JC97-04507A |
| Деталь: | PLATEN-LENS, X4300,SCANNER |
| Парткод: | JC97-04523A |
| Деталь: | PLATEN-HR, X4300,SCANNER |
| Парткод: | JC97-04514A |
| Деталь: | WIRE-FRONT, X4300,SUS304 |
| Парткод: | JC66-04156A |
| Деталь: | PLATEN-RAIL LOWER F, X4300,SCANNER |
| Парткод: | JC97-04517A |
| Деталь: | FRAME-BASE SCANNER, X4300,EGI-SECC,1.0,47 |
| Парткод: | JC61-06249A |
| Деталь: | DSDF-PICK UP LOWER, X7600 |
| Парткод: | JC97-04683A |
| Деталь: | GUIDE-FEED UPPER REGI, X7600,ABS,HF-0660I |
| Парткод: | JC61-07702A |
| Деталь: | DSDF-GUIDE REGI, X7600 |
| Парткод: | JC97-04676A |
| Деталь: | DSDF-SCAN IN UPPER, X7600 |
| Парткод: | JC97-04677A |
| Деталь: | DSDF-SCAN IN LOWER, X7600 |
| Парткод: | JC97-04656A |
| Деталь: | GUIDE-FEED UPPER, X7600,ABS,HF-0660I,SPLI |
| Парткод: | JC61-07701A |
| Деталь: | CONTACT IMAGE SENSOR, 308mm,7776DOT,0.065 |
| Парткод: | 0609-001558 |
| Деталь: | DSDF-DRIVE RELEASE PICK UP, X7600 |
| Парткод: | JC97-04681A |
| Деталь: | BELT-TIMING GEAR, B40S2M120,CR |
| Парткод: | 6602-003641 |
| Деталь: | HOLDER-HARNESS PBA F, X7600,ABS,2.0T,76.1 |
| Парткод: | JC61-07665A |
| Деталь: | PBA-DSDF HIGH, X7600,SEC,FR-4,4L,190100m |
| Парткод: | JC92-02828A |
| Деталь: | DSDF-DRIVE MOTOR FEED, X7600 |
| Парткод: | JC97-04680A |
| Деталь: | DSDF-HINGE L, X7600 |
| Парткод: | JC97-04640A |
| Деталь: | DSDF-HINGE R, X7600 |
| Парткод: | JC97-04641A |
| Деталь: | HOLDER-HARNESS MAIN, X7600,ABS,2.0T,81.8, |
| Парткод: | JC61-07664A |
| Деталь: | HOUSING-FAN MOTOR, X7600,ABS,32.4,85.14,5 |
| Парткод: | JC61-07694A |
| Деталь: | FAN-DC, CLX-8650,Plastic,77g,24V DC,16.91 |
| Парткод: | JC31-00168A |
| Деталь: | HOLDER-HARNESS PBA R, X7600,ABS,2.0T,128. |
| Парткод: | JC61-07666A |
| Деталь: | DSDF-DRIVE LIFT, X7600 |
| Парткод: | JC97-04679A |
| Деталь: | MOTOR STEP 1P, K7600,HB,2,24,3000pps,1.3, |
| Парткод: | JC31-00177A |
| Деталь: | FAN, Type4,24,100mA,2.794mmH20,0.374m3/m |
| Парткод: | JC31-00146A |
| Деталь: | HOUSING-FAN PBA, X7600,ABS,34.9,110.89,91 |
| Парткод: | JC61-07695A |
| Деталь: | DSDF-EXTERIOR, X7600 |
| Парткод: | JC97-04668A |
| Деталь: | COVER-DECO BOTTOM, X7600,ABS,SPLIT BROWN |
| Парткод: | JC63-05205A |
| Деталь: | DSDF-EXIT UPPER, X7600 |
| Парткод: | JC97-04673A |
| Деталь: | DSDF-WHITE ROL SIMPLEX, X7600 |
| Парткод: | JC97-04687A |
| Деталь: | DSDF-SCAN OUT, X7600 |
| Парткод: | JC97-04657A |
| Деталь: | DSDF-BRACKET SUPPORT MAIN, X7600 |
| Парткод: | JC97-04670A |
| Деталь: | DSDF-DRIVE RELEASE SCAN, X7600 |
| Парткод: | JC97-04682A |
| Деталь: | HOLDER-HARNESS FRONT, X7600,ABS,2.0T,146, |
| Парткод: | JC61-07662A |
| Деталь: | DSDF-EXIT LOWER, X7600 |
| Парткод: | JC97-04671A |
| Деталь: | ROLLER ADF-REGI EXIT, X7600,EPDM,GRAY |
| Парткод: | JC66-04890A |
| Деталь: | ROLLER ADF-PRE REGI, X7600 DSDF-H,EPDM,GR |
| Парткод: | JC66-04914A |
| Деталь: | ROLLER ADF-SCAN OUT, X7600 DSDF-H,EPDM,GR |
| Парткод: | JC66-04915A |
| Деталь: | ROLLER ADF-PICK UP FEED, X7600,EPDM,GRAY |
| Парткод: | JC66-04888A |
| Деталь: | BELT-TIMING GEAR, 40S2M130,RUB,W4.0,L130, |
| Парткод: | 6602-001730 |
| Деталь: | GEAR-RDCN SEPARATION, X7600,POM,0.8,37/21 |
| Парткод: | JC66-04876A |
| Деталь: | DSDF-HOUSING SEPARATION ROLLER, X7600 |
| Парткод: | JC97-04661A |
| Деталь: | DSDF-COVER SEPARATION, X7600 |
| Парткод: | JC97-04652A |
| Деталь: | FRAME MAIN-PICKUP UPPER, X7600 |
| Парткод: | JC93-01101A |
| Деталь: | FRAME MAIN-PICKUP LOWER, X7600 |
| Парткод: | JC93-01099A |
| Деталь: | ROLLER FEED-1ST, X7600,EPDM,SUS,8 |
| Парткод: | JC66-04625A |
| Деталь: | HOLDER-FEED ONEWAY, X7600,POM,BLACK,F25-0 |
| Парткод: | JC61-06996A |
| Деталь: | FRAME MAIN-PICKUP ROLLER, X7600 |
| Парткод: | JC93-01092A |
| Деталь: | COUPLER-TORQUELIMITER, CLX-9350,WHITE,350 |
| Парткод: | JC67-00455A |
| Деталь: | GUIDE-HARNESS PICKUP, X7600,ABS,HF-0660I, |
| Парткод: | JC61-07101A |
| Деталь: | GEAR-PICKUP, CLX-9201,POM,0.8,31,NATURAL( |
| Парткод: | JC66-03281A |
| Деталь: | BRACKET-PICKUP REAR, X7600,EGI-SECC,1.2T, |
| Парткод: | JC61-06814A |
| Деталь: | BRACKET-PICKUP FRONT, X7600,EGI-SECC,1.2T |
| Парткод: | JC61-06813A |
| Деталь: | GUIDE-SLIDE PICKUP, X7600,POM,F20-02,BLAC |
| Парткод: | JC61-07031A |
| Деталь: | GUIDE-SUPPORT PICKUP, X7600,ABS+PC,NH-100 |
| Парткод: | JC61-07023A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | LEVER-EMPTY PICKUP, X7600,ABS+PC,NH-1000T |
| Парткод: | JC66-04399A |
| Деталь: | GEAR-M_PU JOINT, SCX-6345N/XRX,POM,0.7,21 |
| Парткод: | JC66-00943A |
| Деталь: | GEAR-M_IDLE PU, SCX-6345N/XRX,POM,0.7,22, |
| Парткод: | JC66-00940A |
| Деталь: | GEAR-M_ONE WAY, SCX-6345N/XRX,POM,0.7,21, |
| Парткод: | JC66-00941A |
| Деталь: | LEVER-INPUT CST, X7600,POM,83.5,32.8,F25- |
| Парткод: | JC66-04323A |
| Деталь: | HOLDER-RETARD, X7600,POM,BLACK,F25-03HT |
| Парткод: | JC61-06886A |
| Деталь: | EXIT-1ST, X7600 |
| Парткод: | JC90-01370A |
| Деталь: | EXIT-SECOND EXIT, X7600 |
| Парткод: | JC90-01373A |
| Деталь: | EXIT-BRACKER 2ND, X7600 |
| Парткод: | JC90-01376A |
| Деталь: | EXIT-GUIDE UPPER, X7600 |
| Парткод: | JC90-01371A |
| Деталь: | EXIT-GUIDE LOWER, X7600 |
| Парткод: | JC90-01372A |
| Деталь: | EXIT-UPPER 2ND, X7600 |
| Парткод: | JC90-01374A |
| Деталь: | EXIT-LOWER 2ND, X7600 |
| Парткод: | JC90-01375A |
| Деталь: | DRIVE-MOTOR STEP, CLX-9201NA,SEC |
| Парткод: | JC93-00802A |
| Деталь: | SOLENOID-LIFTING, CLX-9350,24,80ohm,-10C |
| Парткод: | JC33-00031B |
| Деталь: | GEAR-IDLE Z41, X7600,POM,0.8,41,NATURAL,N |
| Парткод: | JC66-04504A |
| Деталь: | GEAR-DRIVE EXIT 2, X7600,POM,0.8,32,BLACK |
| Парткод: | JC66-04501A |
| Деталь: | PHOTO-INTERRUPTER, TR,75mW,BGA,TR |
| Парткод: | 0604-001393 |
| Деталь: | STACKER-LIMIT STACK T, X7600,ABS+PC,3,24. |
| Парткод: | JC61-07120A |
| Деталь: | ACTUATOR-F_D FULL EXIT, X7600,ABS+PC,NH-1 |
| Парткод: | JC66-04469A |
| Деталь: | BRUSH-EXIT, X7600,SUS FIBER:SUS316L,0.35, |
| Парткод: | JC67-00804A |
| Деталь: | ROLLER FEED-EXIT 3RD, X7600,EPDM,SUM22,6 |
| Парткод: | JC66-04654A |
| Деталь: | GUIDE-GATE DUPLEX, PET+GF,LV2550GN30,BLAC |
| Парткод: | JC61-07082A |
| Деталь: | ROLLER IDLE-EXIT, X7600,POM,F25-03HT,F25- |
| Парткод: | JC66-04499A |
| Деталь: | SPRING-CS, SUS304,0.5,21.8,5.3,FREE,CLOSE |
| Парткод: | 6107-003050 |
| Деталь: | ROLLER-EXIT IDLE, CLX-9201,POM |
| Парткод: | JC61-04806A |
| Деталь: | ROLLER IDLE-EXIT_T, X7600,POM,F25-03HT,F2 |
| Парткод: | JC66-04500A |
| Деталь: | GUIDE-LOWER EXIT, MPPO,N300X,BLACK,GUIDE |
| Парткод: | JC61-07086A |
| Деталь: | ROLLER FEED-EXIT 2ND, X7600,EPDM,SUM22,6 |
| Парткод: | JC66-04653A |
| Деталь: | ROLLER FEED-DUPLEX EXIT, X7600,EPDM,SUM22 |
| Парткод: | JC66-04651A |
| Деталь: | HOLDER-DUP SENSOR, ABS,BLACK,HF-0660I |
| Парткод: | JC61-07214A |
| Деталь: | ACTUATOR-EXIT, SCX-8040,PC HN-1064I,57.2, |
| Парткод: | JC66-02533A |
| Деталь: | LEVER ACTUATOR-DUP, PC,2.6,22.3,57.5,NH-1 |
| Парткод: | JC66-04405A |
| Деталь: | GEAR-IDLE DUPLEX, X7600,POM,0.8,25,BLACK, |
| Парткод: | JC66-04502A |
| Деталь: | GUIDE-RETURN LOWER, ABS+PC,230NH,BLACK,GU |
| Парткод: | JC61-07078A |
| Деталь: | GUIDE-GATE RETURN, PET+GF,LV2550GN30,BLAC |
| Парткод: | JC61-07083A |
| Деталь: | ROLLER IDLE-RUBBER-IDLE, SCX-8040ND,POM,S |
| Парткод: | JC66-02289B |
| Деталь: | GUIDE-DUPLEX EXIT FRONT, ABS+PC,230NH,BLA |
| Парткод: | JC61-07080A |
| Деталь: | GUIDE-DUPLEX EXIT REAR, ABS+PC,230NH,BLAC |
| Парткод: | JC61-07081A |
| Деталь: | ROLLER FEED-EXIT, X7600,EPDM,SUM22,6 |
| Парткод: | JC66-04652A |
Коды ошибок
11-2T01, 11-2T11
11-2T21, 11-2T31
11-2T41, 11-2T51, 11-2T61
61-1111
61-1Y70
61-C401
A1-1111, A1-1113
A1-1211, A1-1213
A1-1611, A1-1612, A1-1613
A1-2211, A1-2212, A1-2213
A1-2311, A1-2312, A1-2313
A1-2411, A1-2412, A1-2413
A1-2511, A1-2512, A1-2513
A1-4310
A1-5212, A1-5213
A1-5312, A1-5313
A1-5412, A1-5413
A1-5512 A1-5513
A2-1221, A2-1223, A2-1521
A2-1523, A2-1721, A2-1723
A2-1741, A2-1743, A2-1761
A2-1763, A2-1781, A2-1783
A2-2321, A2-2323, A2-2421
A2-2423, A2-2920, A2-2921
A3-2113, A3-4114
A3-3111, A3-3112
A3-3113, A3-3114
A3-3210, A3-3211, A3-3212
A3-3310, A3-3311, A3-3312
A3-3410, A3-3411, A3-3412
C1-2110, C1-211A
C1-2120, C1-2130, C1-2140
C1-2311, C1-2313, C1-2314
C1-2411, C1-2413
C1-2510, C1-2512
C1-2711, C1-2712
C1-3110
C1-3120, C1-3130, C1-3140
C1-3150, C1-3160
C1-3311, C1-3313, C1-3314
C1-3411, C1-3413
C1-3512
C1-3711, C1-3712
C1-4110, C1-411A
C1-4120, C1-4130, C1-4140
C1-4150, C1-4160
C1-4311, C1-4313, C1-4314
C1-4411, C1-4413
C1-4512
C1-5110, C1-511A
C1-5120, C1-5130, C1-5140
C1-5150, C1-5160
C1-5311, C1-5313, C1-5314
C1-5411, C1-5413
C1-5512
C3-2110
C3-2130, C3-2140
C3-2411
C3-2511, C3-2512
C3-3110
C3-3130, C3-3140
C3-3411
C3-3512
C3-4110
C3-4130, C3-4140
C3-4411
C3-4512
C3-5110
C3-5130, C3-5140
C3-5411
C3-5512
C5-1110
C5-1120
C5-2120
C6-1120
C6-1310
C7-1110
C7-1130
C7-1311
C8-2130
C8-2210, C8-2310
C8-2313, C8-231G
C8-3130
C8-3210, C8-3310
C8-3313, C8-331G
C8-4130
C8-4210, C8-4310
C8-4313, C8-431G
C8-5130
C8-5210, C8-5310
C8-5313, C8-531G
C9-2110
C9-2110, C9-2120
C9-2220
H1-1311, H1-1312, H1-1314
H1-1313, H1-1413
H1-1315, H1-1317, H1-1318
H1-1322
H1-1351, H1-1352, H1-1354
H1-1353
H1-1411, H1-1412
H1-1417, H1-1418
H1-1422
H1-1451, H1-1452, H1-1454
H1-1453
H1-2311, H1-2312
H1-2313
H1-2317, H1-2318
H1-2320
H1-2322
H1-2330
H1-2351, H1-2352
H1-2353
H1-4411, H1-4412, H1-4413
H1-4417, H1-4418
H1-4420, H1-4520
H1-4422, H1-4522
H1-4430, H1-4530
H1-4451, H1-4452
H1-4453, H1-4553
H1-4511, H1-4512, H1-4513
H1-4517, H1-4518
H1-4551, H1-4552
H1-5323
H1-5330
M1-1113
M1-1211, M1-1213
M1-1610, M1-1613
M1-3122
M1-3222
M1-4111
M1-4211
M1-5111, M1-5112
M1-5113, M1-5120
M1-5211, M1-5212
M1-5612
M2-1114, M2-1117
M2-1211, M2-1213, M2-1214
M2-1331, M2-1332
M2-1333, M2-1334
M2-2111, M2-2112, M2-2113
M2-2114, M2-2311
M2-2312, M2-2314
M3-1411, M3-1412
M3-1413, M3-1414
M3-2230, M3-2430
S1-1113
S1-1313
S1-1411, S1-1413
S1-2111
S1-2433, S1-2443, S1-2444
S1-2434, S1-2435, S1-2436
S1-2437, S1-2438, S1-2439
S1-2445, S1-2446, S1-2447
S1-2448, S1-2449
S1-2510, S1-2521
S1-3110
S1-4111
S1-4311
S1-5521
S2-1211, S2-2311, S2-3110
S2-3114
S2-33xx, S2-34xx
S2-4210
S2-4410
S2-5111, S2-5112, S2-5120
S2-5131, S2-5132, S2-5133
S2-5135, S2-5136, S2-5161
S2-5164, S2-5210, S2-5240
S3-3121
S3-3211
S4-3131
S4-3132
S5-311x
S6-3113, S6-3122
S6-3114
S6-3123, S6-3128
S7-2110
U1-2115
U1-2xxx
U2-2113, U2-3114
U2-4113, U2-5113
U2-6120, U2-6121
U2-6122, U2-6123
U2-7110, U2-7111, U2-7112
U3-3111, U3-3113, U3-3114
U3-3122
U3-3211, U3-3213, U3-3214
U3-3311, U3-3313, U3-3314
U3-3511, U3-3513, U3-3514
U3-3511, U3-3613, U3-3614
U3-3611, U3-3613, U3-3614
U3-3611, U3-361, U3-3614
U3-4210
Описание
| Error code: | 11-2T01, 11-2T11 |
| Description: | 11-2T01 Load tray with [Letter], [Plain] paper 11-2T11 Load tray 1 with [Letter], [Plain] paper |
| Causes: | Paper in tray is not matched to the machine paper setting. |
| Remedy: | 1) Check and change the paper setting of the corresponding tray properly. |
| Error code: | 11-2T21, 11-2T31 |
| Description: | 11-2T21 Load tray 2 with [Letter], [Plain] paper 11-2T31 Load tray 3 with [Letter], [Plain] paper |
| Causes: | Paper in tray is not matched to the machine paper setting. |
| Remedy: | 1) Check and change the paper setting of the corresponding tray properly. |
| Error code: | 11-2T41, 11-2T51, 11-2T61 |
| Description: | Paper mismatch Tray X Paper mismatch MPT |
| Causes: | Paper in tray is not matched to the machine paper setting. |
| Remedy: | 1) Check and change the paper setting of the corresponding tray properly. |
| Error code: | 61-1111 |
| Description: | Booting Failure: #61-1111. Turn off then on. Call for service if the problem persists |
| Causes: | Hibernation image creation is failed. |
| Remedy: | 1) Turn the machine on with a normal booting. 2) Enter the SVC mode. Select “Hibernation On” again. |
| Error code: | 61-1Y70 |
| Description: | Scanner Failure: #61-1Y70. Turn off then on. Call for service if the problem persists |
| Causes: | A white or black line or band appears on an image scanned, copied, or transmitted by fax with the dual scanner. |
| Remedy: | • If the problem persists after the printer is turned off and then back on, perform shading again on the Diagnostics mode. (A technician visit is required for Tech mode.) |
| Error code: | 61-C401 |
| Description: | Job is completed with error: DNS Error |
| Causes: | Scan to Email job is completed with error. “DNS Error” or same meaning message appears. |
| Remedy: | 1) Access SyncThru Web Service with administrator priviliage. Make sure valid Domain Name or Primary DNS server address in SyncThru Web Service Network Setting Interface Ethernet TCP/IPv4 Domain Name. 2) Input Secondary DNS server address in SyncThru Web Service Network Setting Interface Ethernet TCP/IPv4 Domain Name. Then test connection of the DNS server. Try same job again after few minutes. 3) Input any server address as IP address type. |
| Error code: | A1-1111, A1-1113 |
| Display: | Motor Failure: #A1-1111. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-1111. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1113. Turn off then on. Call for service if the problem persists. |
| Causes: | Regi/MP motor operation is abnormal. • A1–1111 : Regi/MP motor is stopped but machine recognizes it as operational. • A1–1113 : Regi/MP motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around Regi./MP unit. 3) Remove the rear cover. 4) Check if the Regi/MP motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0000) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-1211, A1-1213 |
| Display: | Motor Failure: #A1-1211. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1213. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-1211. Turn off then on. Call for service if the problem persists Motor Failure: #A1-1213. Turn off then on. Call for service if the problem persists |
| Causes: | Fuser motor operation is abnormal. • A1–1211 : Fuser motor is stopped but machine recognizes it as operational. • A1–1213 : Fuser motor is operating but recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around fuser unit. 3) Remove the rear cover. 4) Check if the fuser motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0120) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-1611, A1-1612, A1-1613 |
| Display: | Motor Failure: #A1-1611. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1612. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1613. Turn off then on. Call for service if the problem persists. |
| Description: | Motor Failure: #A1-1611. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1612. Turn off then on. Call for service if the problem persists. Motor Failure: #A1-1613. Turn off then on. Call for service if the problem persists. |
| Causes: | ITB motor operation is abnormal • A1–1611 : ITB motor is stopped but machine recognizes it as operational. • A1–1612 : ITB motor is not operated for print-job. • A1–1613 : ITB motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Remove the ITB unit 4) Check if the ITB motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0450) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2211, A1-2212, A1-2213 |
| Display: | Motor Failure: #A1-2211. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2212. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2213. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-2211. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2212. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2213. Turn off then on. Call for service if the problem persists |
| Causes: | Yellow OPC motor operation is abnormal. • A1–2211 : Yellow OPC motor is stopped but machine recognizes it as operational. • A1–2212 : Yellow OPC motor is not operated for print-job. • A1–2213 : Yellow OPC motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around yellow drum drive unit. 3) Remove the rear cover. 4) Check if the yellow OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select the yellow OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0041) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2311, A1-2312, A1-2313 |
| Display: | Motor Failure: #A1-2311. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2312. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2313. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-2311. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2312. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2313. Turn off then on. Call for service if the problem persists |
| Causes: | Magenta OPC motor operation is abnormal. • A1–2311 : Magenta OPC motor is stopped but machine recognizes it as operational. • A1–2312 : Magenta OPC motor is not operated for print-job. • A1–2313 : Magenta OPC motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around magenta drum drive unit. 3) Remove the rear cover. 4) Check if the magenta OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select the magenta OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0042) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2411, A1-2412, A1-2413 |
| Display: | Motor Failure: #A1-2411. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2412. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2413. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-2411. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2412. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2413. Turn off then on. Call for service if the problem persists |
| Causes: | Cyan OPC motor operation is abnormal. • A1–2411 : Cyan OPC motor is stopped but machine recognizes it as operational. • A1–2412 : Cyan OPC motor is not operated for print-job. • A1–2413 : Cyan OPC motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around cyan drum drive unit. 3) Remove the rear cover. 4) Check if the cyan OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select the cyan OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0043) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-2511, A1-2512, A1-2513 |
| Display: | Motor Failure: #A1-2511. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2512. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2513. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-2511. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2512. Turn off then on. Call for service if the problem persists Motor Failure: #A1-2513. Turn off then on. Call for service if the problem persists |
| Causes: | Black OPC motor operation is abnormal. • A1–2511 : Black OPC motor is stopped but machine recognizes it as operational. • A1–2512 : Black OPC motor is not operated for print-job. • A1–2513 : Black OPC motor is operating but machine recognizes status as "Stopped". |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Open the side cover. Check if there are any foreign substances or paper around black drum drive unit. 3) Remove the rear cover. 4) Check if the black OPC motor connector is connected correctly. 5) If the connection is OK, turn the machine on. Enter SVC mode. Select the black OPC motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100–0044) Check the motor operation. a) If the motor is not operational, • Check the signal and power with the DVM. • If the checked result is normal, replace the motor(JC31-00123B). • If the checked result is abnormal, check the following. - If 24V power is not generated, replace the SMPS board (JC44-00100C (220V) / JC44-00093C (110V)). - If the control signal is abnormal, replace the main board(JC92-02742A). b) If the motor is operational, • Check the Pin Num 8. If the value is abnormal, replace the main board. If the value is normal, replace the harness. |
| Error code: | A1-4310 |
| Display: | Motor Failure: #A1-4310. Turn off then on. Call for service if the problem persists |
| Description: | Actuator Motor Failure : #A1-4310. Call for service if the problem persists. |
| Causes: | The motor for ITB unit does not operate normally. |
| Remedy: | 1) Turn the machine off then on. If the error persists, turn the machine off again. 2) Remove the right cover. 3) Check if the connection between main board and the main drive unit are correct. 4) If the connection is OK, replace the main drive unit. 5) If the problem persists, replace the main board. |
| Error code: | A1-5212, A1-5213 |
| Display: | Motor Failure: #A1-5212. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5213. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-5212. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5213. Turn off then on. Call for service if the problem persists |
| Causes: | Yellow toner is not supplied normally. • A1–5212 : Toner supply is stopped during operation. • A1–5213 : Toner is not supplied. |
| Remedy: | 1) Open the front cover. If the yellow toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 3) Enter SVC mode. Select the yellow toner supply motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 111-0000 : Toner Dispense Motor Yellow 4) If the motor is not operational, measure the yellow motor power with DVM. a) If 24V power is generated, replace the yellow toner supply motor(JC93-00446A). b) If 24V power is not generated, • Measure the 24V power on the SMPS board. If the SMPS board(JC44-00100C (220V) / JC44-00093C (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02742A). |
| Error code: | A1-5312, A1-5313 |
| Display: | Motor Failure: #A1-5312. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5313. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-5312. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5313. Turn off then on. Call for service if the problem persists |
| Causes: | Magenta toner is not supplied normally. • A1–5312 : Toner supply is stopped during operation. • A1–5313 : Toner is not supplied. |
| Remedy: | 1) Open the front cover. If the magenta toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 4) If the motor is not operational, measure the magenta motor power with DVM. a) If 24V power is generated, replace the magenta toner supply motor(JC93-00446A). b) If 24V power is not generated, • Measure the 24V power on the SMPS board. If the SMPS board(JC44-00100C (220V) / JC44-00093C (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02742A). |
| Error code: | A1-5412, A1-5413 |
| Display: | Motor Failure: #A1-5412. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5413. Turn off then on. Call for service if the problem persists |
| Description: | Motor Failure: #A1-5412. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5413. Turn off then on. Call for service if the problem persists |
| Causes: | Cyan toner is not supplied normally. • A1–5412 : Toner supply is stopped during operation. • A1–5413 : Toner is not supplied. |
| Remedy: | 1) Open the front cover. If the cyan toner pipe is blocked, open it. 2) Turn the machine off then on. If the error persists, check the following steps. 3) Enter SVC mode. Select the cyan toner supply motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 111-0020 : Toner Dispense Motor Cyan 4) If the motor is not operational, measure the cyan motor power with DVM. a) If 24V power is generated, replace the cyan toner supply motor(JC93-00446A). b) If 24V power is not generated, • Measure the 24V power on the SMPS board. If the SMPS board(JC44-00100C (220V) / JC44-00093C (110V)) is defective, replace it. • If the SMPS board is normal, replace the main board(JC92-02742A). |
| Error code: | A1-5512 A1-5513 |
| Description: | Motor Failure: #A1-5512. Turn off then on. Call for service if the problem persists Motor Failure: #A1-5513. Turn off then on. Call for service if the problem persists |
| Causes: | Black toner is not supplied normally. |
| Remedy: | • A1–5512 : Toner supply is stopped during operation. • A1–5513 : Toner is not supplied. 1) Turn the machine off then on. If the problem persists, check the followings 2) Open the front cover. If the black toner pipe is blocked, open it. 3) Enter SVC mode. Execute the black toner supply motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines) a) If the motor is not operational, i) Check the power(24V). If the power is abnormal, check the SMPS board. If the SMPS board is defective, replace it. ii) If the SMPS board is normal, replace the main board. iii) If the error persists after replacing the main board, replace the black toner supply motor. b) If the motor is operational, i) Check the toner cartridge remains. If necessary, replace the black toner cartridge. ii) If the toner cartridge remains is enough, replace the black drum unit. |
| Error code: | A2-1221, A2-1223, A2-1521 |
| Description: | SMPS Fan Failure: #A2-122x. Open the door, then close it. Call for service if the problem persists Duplex Fan Failure: #A2-152x. Open the door, then close it. Call for service if the problem persists Exit Fan Failure: #A2-17xx. Open the door, then close it. Call for service if the problem persists Fuser Fan Failure: #A2-232x. Open the door, then close it. Call for service if the problem persists LSU Fan Failure: #A2-242x. Open the door, then close it. Call for service if the problem persists OPC Fan Failure: #A2-292x. Open the door, then close it. Call for service if the problem persists |
| Causes: | SMPS / Duplex / Exit / Fuser / LSU / OPC fan operation is abnormal. • SMPS fan error : A2–1221 / A2–1223 • Duplex fan error : A2–1521 / A2–1523 • Exit 1 fan error : A2–1721 / A2–1723 • Exit 2 fan error : A2–1741 / A2–1743 • Exit 3 fan error : A2–1761 / A2–1763 • Exit 4 fan error : A2–1781 / A2–1783 • Fuser out fan error : A2–2321 / A2–2323 • LSU fan error : A2–2421 / A2–2423 • OPC in fan error : A2–2920 / A2–2921 |
| Remedy: | 1) Turn the machine off then on. If the problem persists, check the followings. 2) Check the connection of the corresponding fan and main board. 3) If the connection is OK, enter SVC mode. Execute the fan test. (Diagnostics > Engine Diagnostics > Engine Test Routines) a) If the fan is not operational, i) Check the power(24V). • If the power is abnormal, check the SMPS board. If the SMPS board is defective, replace it. • If the SMPS board is normal, replace the corresponding fan. • If the error persists after replacing the fan, replace the main board. b) If the fan is operational, i) Check the fan signal (3.3V) as connected or disconnected. • If the fan signal as disconnected is abnormal, replace the main board. • If the fan signal as connected is abnormal, replace the corresponding fan. |
| Error code: | A2-1523, A2-1721, A2-1723 |
| Description: | SMPS Fan Failure: #A2-122x. Open the door, then close it. Call for service if the problem persists Duplex Fan Failure: #A2-152x. Open the door, then close it. Call for service if the problem persists Exit Fan Failure: #A2-17xx. Open the door, then close it. Call for service if the problem persists Fuser Fan Failure: #A2-232x. Open the door, then close it. Call for service if the problem persists LSU Fan Failure: #A2-242x. Open the door, then close it. Call for service if the problem persists OPC Fan Failure: #A2-292x. Open the door, then close it. Call for service if the problem persists |
| Causes: | SMPS / Duplex / Exit / Fuser / LSU / OPC fan operation is abnormal. • SMPS fan error : A2–1221 / A2–1223 • Duplex fan error : A2–1521 / A2–1523 • Exit 1 fan error : A2–1721 / A2–1723 • Exit 2 fan error : A2–1741 / A2–1743 • Exit 3 fan error : A2–1761 / A2–1763 • Exit 4 fan error : A2–1781 / A2–1783 • Fuser out fan error : A2–2321 / A2–2323 • LSU fan error : A2–2421 / A2–2423 • OPC in fan error : A2–2920 / A2–2921 |
| Remedy: | 1) Turn the machine off then on. If the problem persists, check the followings. 2) Check the connection of the corresponding fan and main board. 3) If the connection is OK, enter SVC mode. Execute the fan test. (Diagnostics > Engine Diagnostics > Engine Test Routines) a) If the fan is not operational, i) Check the power(24V). • If the power is abnormal, check the SMPS board. If the SMPS board is defective, replace it. • If the SMPS board is normal, replace the corresponding fan. • If the error persists after replacing the fan, replace the main board. b) If the fan is operational, i) Check the fan signal (3.3V) as connected or disconnected. • If the fan signal as disconnected is abnormal, replace the main board. • If the fan signal as connected is abnormal, replace the corresponding fan. |
| Error code: | A2-1741, A2-1743, A2-1761 |
| Description: | SMPS Fan Failure: #A2-122x. Open the door, then close it. Call for service if the problem persists Duplex Fan Failure: #A2-152x. Open the door, then close it. Call for service if the problem persists Exit Fan Failure: #A2-17xx. Open the door, then close it. Call for service if the problem persists Fuser Fan Failure: #A2-232x. Open the door, then close it. Call for service if the problem persists LSU Fan Failure: #A2-242x. Open the door, then close it. Call for service if the problem persists OPC Fan Failure: #A2-292x. Open the door, then close it. Call for service if the problem persists |
| Causes: | SMPS / Duplex / Exit / Fuser / LSU / OPC fan operation is abnormal. • SMPS fan error : A2–1221 / A2–1223 • Duplex fan error : A2–1521 / A2–1523 • Exit 1 fan error : A2–1721 / A2–1723 • Exit 2 fan error : A2–1741 / A2–1743 • Exit 3 fan error : A2–1761 / A2–1763 • Exit 4 fan error : A2–1781 / A2–1783 • Fuser out fan error : A2–2321 / A2–2323 • LSU fan error : A2–2421 / A2–2423 • OPC in fan error : A2–2920 / A2–2921 |
| Remedy: | 1) Turn the machine off then on. If the problem persists, check the followings. 2) Check the connection of the corresponding fan and main board. 3) If the connection is OK, enter SVC mode. Execute the fan test. (Diagnostics > Engine Diagnostics > Engine Test Routines) a) If the fan is not operational, i) Check the power(24V). • If the power is abnormal, check the SMPS board. If the SMPS board is defective, replace it. • If the SMPS board is normal, replace the corresponding fan. • If the error persists after replacing the fan, replace the main board. b) If the fan is operational, i) Check the fan signal (3.3V) as connected or disconnected. • If the fan signal as disconnected is abnormal, replace the main board. • If the fan signal as connected is abnormal, replace the corresponding fan. |
| Error code: | A2-1763, A2-1781, A2-1783 |
| Description: | SMPS Fan Failure: #A2-122x. Open the door, then close it. Call for service if the problem persists Duplex Fan Failure: #A2-152x. Open the door, then close it. Call for service if the problem persists Exit Fan Failure: #A2-17xx. Open the door, then close it. Call for service if the problem persists Fuser Fan Failure: #A2-232x. Open the door, then close it. Call for service if the problem persists LSU Fan Failure: #A2-242x. Open the door, then close it. Call for service if the problem persists OPC Fan Failure: #A2-292x. Open the door, then close it. Call for service if the problem persists |
| Causes: | SMPS / Duplex / Exit / Fuser / LSU / OPC fan operation is abnormal. • SMPS fan error : A2–1221 / A2–1223 • Duplex fan error : A2–1521 / A2–1523 • Exit 1 fan error : A2–1721 / A2–1723 • Exit 2 fan error : A2–1741 / A2–1743 • Exit 3 fan error : A2–1761 / A2–1763 • Exit 4 fan error : A2–1781 / A2–1783 • Fuser out fan error : A2–2321 / A2–2323 • LSU fan error : A2–2421 / A2–2423 • OPC in fan error : A2–2920 / A2–2921 |
| Remedy: | 1) Turn the machine off then on. If the problem persists, check the followings. 2) Check the connection of the corresponding fan and main board. 3) If the connection is OK, enter SVC mode. Execute the fan test. (Diagnostics > Engine Diagnostics > Engine Test Routines) a) If the fan is not operational, i) Check the power(24V). • If the power is abnormal, check the SMPS board. If the SMPS board is defective, replace it. • If the SMPS board is normal, replace the corresponding fan. • If the error persists after replacing the fan, replace the main board. b) If the fan is operational, i) Check the fan signal (3.3V) as connected or disconnected. • If the fan signal as disconnected is abnormal, replace the main board. • If the fan signal as connected is abnormal, replace the corresponding fan. |
| Error code: | A2-2321, A2-2323, A2-2421 |
| Description: | SMPS Fan Failure: #A2-122x. Open the door, then close it. Call for service if the problem persists Duplex Fan Failure: #A2-152x. Open the door, then close it. Call for service if the problem persists Exit Fan Failure: #A2-17xx. Open the door, then close it. Call for service if the problem persists Fuser Fan Failure: #A2-232x. Open the door, then close it. Call for service if the problem persists LSU Fan Failure: #A2-242x. Open the door, then close it. Call for service if the problem persists OPC Fan Failure: #A2-292x. Open the door, then close it. Call for service if the problem persists |
| Causes: | SMPS / Duplex / Exit / Fuser / LSU / OPC fan operation is abnormal. • SMPS fan error : A2–1221 / A2–1223 • Duplex fan error : A2–1521 / A2–1523 • Exit 1 fan error : A2–1721 / A2–1723 • Exit 2 fan error : A2–1741 / A2–1743 • Exit 3 fan error : A2–1761 / A2–1763 • Exit 4 fan error : A2–1781 / A2–1783 • Fuser out fan error : A2–2321 / A2–2323 • LSU fan error : A2–2421 / A2–2423 • OPC in fan error : A2–2920 / A2–2921 |
| Remedy: | 1) Turn the machine off then on. If the problem persists, check the followings. 2) Check the connection of the corresponding fan and main board. 3) If the connection is OK, enter SVC mode. Execute the fan test. (Diagnostics > Engine Diagnostics > Engine Test Routines) a) If the fan is not operational, i) Check the power(24V). • If the power is abnormal, check the SMPS board. If the SMPS board is defective, replace it. • If the SMPS board is normal, replace the corresponding fan. • If the error persists after replacing the fan, replace the main board. b) If the fan is operational, i) Check the fan signal (3.3V) as connected or disconnected. • If the fan signal as disconnected is abnormal, replace the main board. • If the fan signal as connected is abnormal, replace the corresponding fan. |
| Error code: | A2-2423, A2-2920, A2-2921 |
| Description: | SMPS Fan Failure: #A2-122x. Open the door, then close it. Call for service if the problem persists Duplex Fan Failure: #A2-152x. Open the door, then close it. Call for service if the problem persists Exit Fan Failure: #A2-17xx. Open the door, then close it. Call for service if the problem persists Fuser Fan Failure: #A2-232x. Open the door, then close it. Call for service if the problem persists LSU Fan Failure: #A2-242x. Open the door, then close it. Call for service if the problem persists OPC Fan Failure: #A2-292x. Open the door, then close it. Call for service if the problem persists |
| Causes: | SMPS / Duplex / Exit / Fuser / LSU / OPC fan operation is abnormal. • SMPS fan error : A2–1221 / A2–1223 • Duplex fan error : A2–1521 / A2–1523 • Exit 1 fan error : A2–1721 / A2–1723 • Exit 2 fan error : A2–1741 / A2–1743 • Exit 3 fan error : A2–1761 / A2–1763 • Exit 4 fan error : A2–1781 / A2–1783 • Fuser out fan error : A2–2321 / A2–2323 • LSU fan error : A2–2421 / A2–2423 • OPC in fan error : A2–2920 / A2–2921 |
| Remedy: | 1) Turn the machine off then on. If the problem persists, check the followings. 2) Check the connection of the corresponding fan and main board. 3) If the connection is OK, enter SVC mode. Execute the fan test. (Diagnostics > Engine Diagnostics > Engine Test Routines) a) If the fan is not operational, i) Check the power(24V). • If the power is abnormal, check the SMPS board. If the SMPS board is defective, replace it. • If the SMPS board is normal, replace the corresponding fan. • If the error persists after replacing the fan, replace the main board. b) If the fan is operational, i) Check the fan signal (3.3V) as connected or disconnected. • If the fan signal as disconnected is abnormal, replace the main board. • If the fan signal as connected is abnormal, replace the corresponding fan. |
| Error code: | A3-2113, A3-4114 |
| Description: | The CTD/ACR sensor is dirty. Please clean it with soft cloth or paper. |
| Causes: | CTD/ACR sensor window is contaminated. |
| Remedy: | 1) Open the side cover. 2) Clean the sensor window [A] with a soft cloth. 3) Close the side cover. 4) Enter SVC mode. Select the “CTD Sensor Cleaning” (Diagnostics Image Management > Auto Color Tone Adjustment Condition > CTD Sensor Cleaning) 5) When pop up appears, select the “Yes” button. NOTE a) CTD sensor calibration will start. Then “CTD sensor failure” error will be solved b) If you don’t execute the CTD sensor cleaning in SVC mode, error message persists. |
| Error code: | A3-3111, A3-3112 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | Sensor Failure: #A3-3111. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3112. Turn off then on. Call for service if the problem persists |
| Causes: | The NC sensor in the fuser unit is defective. / The sensor signal is abnormal due to a defective harness. • A3–3111 : Center NC sensor is in short status. • A3–3112 : Center NC sensor is in open status. • A3–3113 : Side NC sensor is in short status. • A3–3114 : Side NC sensor is in open status. |
| Remedy: | 1) Enter SVC mode. Execute sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 109-0000 : Fuser Temperature A • 109-0010 : Fuser Temperature B 3) Measure the resistance value of the thermistor (1404-001453). If the measured value is out of 307KΩ~430KΩ @25℃, replace the thermistor. 4) Install the fuser unit after replacing the thermistor. 5) If the error persists, replace the fuser unit (JC91-01157A(220V) / JC91–01158A (110V)). 6) If the error persists after replacing fuser unit, replace the main board(JC92–02742A). |
| Error code: | A3-3113, A3-3114 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | Sensor Failure: #A3-3113. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3114. Turn off then on. Call for service if the problem persists |
| Causes: | The NC sensor in the fuser unit is defective. / The sensor signal is abnormal due to a defective harness. • A3–3111 : Center NC sensor is in short status. • A3–3112 : Center NC sensor is in open status. • A3–3113 : Side NC sensor is in short status. • A3–3114 : Side NC sensor is in open status. |
| Remedy: | 1) Enter SVC mode. Execute sensor test to check the sensor operation. (Diagnostics > Engine Diagnostics > Engine Test Routines) • 109-0000 : Fuser Temperature A • 109-0010 : Fuser Temperature B 3) Measure the resistance value of the thermistor (1404-001453). If the measured value is out of 307KΩ~430KΩ @25℃, replace the thermistor. 4) Install the fuser unit after replacing the thermistor. 5) If the error persists, replace the fuser unit (JC91-01157A(220V) / JC91–01158A (110V)). 6) If the error persists after replacing fuser unit, replace the main board(JC92–02742A). |
| Error code: | A3-3210, A3-3211, A3-3212 |
| Display: | Sensor Failure: #. Turn off then on. Call for service if the problem persists. |
| Description: | Sensor Failure: #A3-3210. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3211. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3212. Turn off then on. Call for service if the problem persists |
| Causes: | Inner temperature sensor is defective. • A3–3210 : Inner temperature sensor value is abnormal. • A3–3211 : Inner temperature sensor is in short status. • A3–3212 : Inner temperature sensor is in open status. |
| Remedy: | 1) Open the side cover. Check the connection. • If the connection is OK, replace the photo sensor (1404-001417). 2) If the sensor is normal, replace the main board(JC92-02742A). |
| Error code: | A3-3310, A3-3311, A3-3312 |
| Display: | Sensor Failure: #A3-3310. Turn off then on. Call for service if the problem persists. Actuator Fan Failure #: Turn off then on. |
| Description: | Sensor Failure: #A3-3310. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3311. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3312. Turn off then on. Call for service if the problem persists |
| Causes: | Outer temperature/humidity sensor is defective. • A3–3310 / A3–3311 / A3–3312 : Temperature function is abnormal. • A3–3410 / A3–3411 / A3–3412 : Humidity function is abnormal. |
| Remedy: | 1) Remove the left cover. Unplug and reconnect the sensor harness. If the error persists, replace the sensor(JC93-00486A). 2) If the harness and sensor are normal, replace the main board (JC92-02742A). |
| Error code: | A3-3410, A3-3411, A3-3412 |
| Display: | Sensor Failure: #A3-3310. Turn off then on. Call for service if the problem persists. Actuator Fan Failure #: Turn off then on. |
| Description: | Sensor Failure: #A3-3410. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3411. Turn off then on. Call for service if the problem persists Sensor Failure: #A3-3412. Turn off then on. Call for service if the problem persists |
| Causes: | Outer temperature/humidity sensor is defective. • A3–3310 / A3–3311 / A3–3312 : Temperature function is abnormal. • A3–3410 / A3–3411 / A3–3412 : Humidity function is abnormal. |
| Remedy: | 1) Remove the left cover. Unplug and reconnect the sensor harness. If the error persists, replace the sensor(JC93-00486A). 2) If the harness and sensor are normal, replace the main board (JC92-02742A). |
| Error code: | C1-2110, C1-211A |
| Description: | Prepare new yellow toner cartridge. |
| Causes: | Yellow toner is almost empty. |
| Remedy: | 1) Order new yellow toner cartridge because toner cartridge with level of “Low” will be exhausted soon. |
| Error code: | C1-2120, C1-2130, C1-2140 |
| Display: | Replace with new yellow toner cartridge End of life, Replace with new yellow toner cartridge |
| Description: | Replace with new yellow toner cartridge End of life, Replace with new yellow toner cartridge |
| Causes: | The yellow toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the yellow toner cartridge. 3) Install the new yellow toner cartridge. 4) Close the front cover. |
| Error code: | C1-2311, C1-2313, C1-2314 |
| Description: | Yellow Toner Cartridge Failure: #C1-231x. Install yellow toner cartridge again |
| Causes: | Yellow toner supply is inefficient or abnormal. |
| Remedy: | 1) Open the front cover. 2) Remove the yellow toner cartridge. Stand the toner cartridge vertically and tap its top section to distribute the toner evenly inside the cartridge. And turn over the toner cartridge and tap the top in the same way. 3) Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 4) Close the front cover. 5) Check if the toner supply pipe is blocked. Replace the reservoir Unit. 6) Check the toner supply motor operation. Reconnect the harness. If the motor is broken, replace it. |
| Error code: | C1-2411, C1-2413 |
| Description: | Yellow toner cartridge is not installed. Install it. Shake yellow toner cartridge. |
| Causes: | The yellow toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the yellow toner cartridge is installed. 2) Remove and reinstall the yellow toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the yellow toner cartridge with a new one. |
| Error code: | C1-2510, C1-2512 |
| Description: | Yellow toner cartridge is not compatible. Check users guide. |
| Causes: | Yellow toner cartridge is not compatible. |
| Remedy: | 1) Replace the yellow toner cartridge with a new one. |
| Error code: | C1-2711, C1-2712 |
| Display: | Toner Cartridge Failure: #. Call for service |
| Description: | Yellow toner cartridge is not installed. Install it. Shake yellow toner cartridge. |
| Causes: | The yellow toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the yellow toner cartridge is installed. 2) Remove and reinstall the yellow toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the yellow toner cartridge with a new one. |
| Error code: | C1-3110 |
| Display: | Prepare new magenta toner cartridge. |
| Description: | Prepare new magenta toner cartridge. |
| Causes: | Magenta toner is almost empty. |
| Remedy: | 1) Order new magenta toner cartridge because toner cartridge with level of “Low” will be exhausted soon. |
| Error code: | C1-3120, C1-3130, C1-3140 |
| Display: | Replace with new magenta toner cartridge End of life, Replace with new magenta toner cartridge |
| Description: | Replace with new magenta toner cartridge End of life, Replace with new magenta toner cartridge |
| Causes: | The magenta toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the magenta toner cartridge. 3) Install the new magenta toner cartridge. 4) Close the front cover. |
| Error code: | C1-3150, C1-3160 |
| Description: | Replace with new magenta toner cartridge End of life, Replace with new magenta toner cartridge |
| Causes: | The magenta toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the magenta toner cartridge. 3) Install the new magenta toner cartridge. 4) Close the front cover. 5) Check if the toner pipe is blocked. Replace it, if necessary. |
| Error code: | C1-3311, C1-3313, C1-3314 |
| Description: | Magenta Toner Cartridge Failure: #C1-3311. Install magenta toner cartridge again |
| Causes: | Magenta toner supply is inefficient or abnormal. |
| Remedy: | 1) Open the front cover. 2) Remove the magenta toner cartridge. Stand the toner cartridge vertically and tap its top section to distribute the toner evenly inside the cartridge. And turn over the toner cartridge and tap the top in the same way. 3) Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 4) Close the front cover. 5) Check if the toner supply pipe is blocked. Replace the reservoir Unit. 6) Check the toner supply motor operation. Reconnect the harness. If the motor is broken, replace it. |
| Error code: | C1-3411, C1-3413 |
| Description: | Magenta toner cartridge is not installed. Install it. Shake magenta toner cartridge. |
| Causes: | The magenta toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the magenta toner cartridge is installed. 2) Remove and reinstall the magenta toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the magenta toner cartridge(CLT-M809S) with a new one. |
| Error code: | C1-3512 |
| Display: | Magenta toner cartridge is not compatible. Check users guide. |
| Description: | Magenta toner cartridge is not compatible. Check users guide. |
| Causes: | Magenta toner cartridge is not compatible. |
| Remedy: | 1) Replace the magenta toner cartridge with a new one. |
| Error code: | C1-3711, C1-3712 |
| Display: | Toner Cartridge Failure: #. Call for service |
| Description: | Magenta toner cartridge is not installed. Install it. Shake magenta toner cartridge. |
| Causes: | The magenta toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the magenta toner cartridge is installed. 2) Remove and reinstall the magenta toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the magenta toner cartridge with a new one. |
| Error code: | C1-4110, C1-411A |
| Description: | Prepare new cyan toner cartridge. |
| Causes: | Cyan toner is almost empty. |
| Remedy: | 1) Order new cyan toner cartridge because toner cartridge with level of “Low” will be exhausted soon. |
| Error code: | C1-4120, C1-4130, C1-4140 |
| Display: | Replace with new cyan toner cartridge End of life, Replace with new cyan toner cartridge |
| Description: | Replace with new cyan toner cartridge End of life, Replace with new cyan toner cartridge |
| Causes: | The cyan toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the cyan toner cartridge. 3) Install the new cyan toner cartridge. 4) Close the front cover. |
| Error code: | C1-4150, C1-4160 |
| Description: | Replace with new cyan toner cartridge End of life, Replace with new cyan toner cartridge |
| Causes: | The cyan toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the cyan toner cartridge. 3) Install the new cyan toner cartridge. 4) Close the front cover. |
| Error code: | C1-4311, C1-4313, C1-4314 |
| Description: | Cyan Toner Cartridge Failure: #C1-431x. Install yellow toner cartridge again |
| Causes: | Cyan toner supply is inefficient or abnormal. |
| Remedy: | 1) Open the front cover. 2) Remove the cyan toner cartridge. Stand the toner cartridge vertically and tap its top section to distribute the toner evenly inside the cartridge. And turn over the toner cartridge and tap the top in the same way. 3) Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 4) Close the front cover. 5) Check if the toner supply pipe is blocked. Replace the reservoir Unit. 6) Check the toner supply motor operation. Reconnect the harness. If the motor is broken, replace it. |
| Error code: | C1-4411, C1-4413 |
| Description: | Cyan toner cartridge is not installed. Install it. Shake cyan toner cartridge. |
| Causes: | The cyan toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the cyan toner cartridge is installed. 2) Remove and reinstall the cyan toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the cyan toner cartridge with a new one. |
| Error code: | C1-4512 |
| Display: | Cyan toner cartridge is not compatible. Check users guide |
| Description: | Cyan toner cartridge is not compatible. Check users guide. |
| Causes: | Cyan toner cartridge is not compatible. |
| Remedy: | 1) Replace the cyan toner cartridge with a new one. |
| Error code: | C1-5110, C1-511A |
| Description: | Prepare new black toner cartridge. |
| Causes: | Black toner is almost empty. |
| Remedy: | 1) Order new black toner cartridge because toner cartridge with level of “Low” will be exhausted soon. |
| Error code: | C1-5120, C1-5130, C1-5140 |
| Display: | Replace with new black toner cartridge End of life, Replace with new black toner cartridge. |
| Description: | Replace with new black toner cartridge End of life, Replace with new black toner cartridge |
| Causes: | The black toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the black toner cartridge. 3) Install the new black toner cartridge. 4) Close the front cover. |
| Error code: | C1-5150, C1-5160 |
| Description: | Replace with new black toner cartridge End of life, Replace with new black toner cartridge |
| Causes: | The black toner cartridge is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the black toner cartridge. 3) Install the new black toner cartridge. 4) Close the front cover. |
| Error code: | C1-5311, C1-5313, C1-5314 |
| Description: | Black Toner Cartridge Failure: #C1-5311. Install black toner cartridge again |
| Causes: | Black toner supply is inefficient or abnormal. |
| Remedy: | 1) Open the front cover. 2) Remove the black toner cartridge. Stand the toner cartridge vertically and tap its top section to distribute the toner evenly inside the cartridge. And turn over the toner cartridge and tap the top in the same way. 3) Shake the toner cartridge horizontally to distribute the toner evenly inside the cartridge. 4) Close the front cover. 5) Check if the toner supply pipe is blocked. Replace the reservoir Unit. 6) Check the toner supply motor operation. Reconnect the harness. If the motor is broken, replace it. |
| Error code: | C1-5411, C1-5413 |
| Description: | Black toner cartridge is not installed. Install it. Shake black toner cartridge. |
| Causes: | The black toner cartridge is not installed. / The CRUM data is not detected. |
| Remedy: | 1) Open the front cover. Check if the black toner cartridge is installed. 2) Remove and reinstall the black toner cartridge. 3) If the problem persists, check if the toner cartridge modular jack is contaminated or deformed. 4) Replace the black toner cartridge with a new one. |
| Error code: | C1-5512 |
| Display: | Black toner cartridge is not compatible. Check users guide. |
| Description: | Black toner cartridge is not compatible. Check users guide. |
| Causes: | Black toner cartridge is not compatible. |
| Remedy: | 1) Replace the black toner cartridge with a new one. |
| Error code: | C3-2110 |
| Display: | Prepare new yellow imaging unit |
| Description: | Prepare new yellow imaging unit |
| Causes: | Yellow drum unit has almost reached the end of its life. |
| Remedy: | 1) Order new yellow drum unit because drum unit with level of “Low” will be exhausted soon. |
| Error code: | C3-2130, C3-2140 |
| Display: | End of life, Replace with new yellow imaging unit |
| Description: | End of life, Replace with new yellow imaging unit |
| Causes: | Yellow drum unit is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the yellow drum unit. 4) Install the new yellow drum unit. 5) Clean the LSU window. 6) Install the waste toner container. 7) Close the front cover. |
| Error code: | C3-2411 |
| Display: | Yellow imaging unit is not installed. Install it. |
| Description: | Yellow imaging unit is not installed. Install it. |
| Causes: | The yellow drum unit is not installed. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove and reinstall the yellow drum unit 4) Install the waste toner container. 5) Close the front cover. |
| Error code: | C3-2511, C3-2512 |
| Description: | Yellow imaging unit is not compatible. Check user`s guide |
| Causes: | Yellow drum unit is not compatible. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the yellow drum unit. Check if the drum unit is compatible with the machine. 4) If the drum unit is not a samsung genuine, replace it with a new one. |
| Error code: | C3-3110 |
| Display: | Prepare new magenta imaging unit |
| Description: | Prepare new magenta imaging unit |
| Causes: | Magenta drum unit has almost reached the end of its life. |
| Remedy: | 1) Order new magenta drum unit because drum unit with level of “Low” will be exhausted soon. |
| Error code: | C3-3130, C3-3140 |
| Display: | End of life, Replace with new magenta imaging unit |
| Description: | End of life, Replace with new magenta imaging unit |
| Causes: | Magenta drum unit is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the magenta drum unit. 4) Install the new magenta drum unit. 5) Clean the LSU window. 6) Install the waste toner container. 7) Close the front cover. |
| Error code: | C3-3411 |
| Display: | Magenta imaging unit is not installed. Install it. |
| Description: | Magenta imaging unit is not installed. Install it. |
| Causes: | The magenta drum unit is not installed. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove and reinstall the magenta drum unit. 4) Install the waste toner container. 5) Close the front cover. |
| Error code: | C3-3512 |
| Display: | Magenta imaging unit is not compatible. Check user`s guide |
| Description: | Magenta imaging unit is not compatible. Check user`s guide |
| Causes: | Magenta drum unit is not compatible. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the magenta drum unit. Check if the drum unit is compatible with the machine. 4) If the drum unit is not a samsung genuine, replace it with a new one. |
| Error code: | C3-4110 |
| Display: | Prepare new cyan imaging unit |
| Description: | Prepare new cyan imaging unit |
| Causes: | Cyan drum unit has almost reached the end of its life. |
| Remedy: | 1) Order new cyan drum unit because drum unit with level of “Low” will be exhausted soon. |
| Error code: | C3-4130, C3-4140 |
| Display: | End of life, Replace with new magenta imaging unit |
| Description: | End of life, Replace with new magenta imaging unit |
| Causes: | Cyan drum unit is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the cyan drum unit. 4) Install the new cyan drum unit. 5) Clean the LSU window. 6) Install the waste toner container. 7) Close the front cover. |
| Error code: | C3-4411 |
| Display: | Cyan imaging unit is not installed. Install it. |
| Description: | Cyan imaging unit is not installed. Install it. Cyan Imaging Unit Failure: #C3-4414. Install imaging unit again. |
| Causes: | The cyan drum unit is not installed. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove and reinstall the cyan drum unit 4) Install the waste toner container. 5) Close the front cover. |
| Error code: | C3-4512 |
| Display: | Cyan imaging unit is not compatible. Check user`s guide |
| Description: | Cyan imaging unit is not compatible. Check user`s guide |
| Causes: | Cyan drum unit is not compatible. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the cyan drum unit. Check if the drum unit is compatible with the machine. 4) If the drum unit is not a samsung genuine, replace it with a new one. |
| Error code: | C3-5110 |
| Display: | Prepare new cyan imaging unit |
| Description: | Prepare new cyan imaging unit |
| Causes: | Black drum unit has almost reached the end of its life. |
| Remedy: | 1) Order new black drum unit because drum unit with level of “Low” will be exhausted soon. |
| Error code: | C3-5130, C3-5140 |
| Display: | End of life, Replace with new magenta imaging unit |
| Description: | End of life, Replace with new magenta imaging unit |
| Causes: | Black drum unit is at the end of its life. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the black drum unit. 4) Install the new black drum unit. 5) Clean the LSU window. 6) Install the waste toner container. 7) Close the front cover. |
| Error code: | C3-5411 |
| Display: | Black imaging unit is not installed. Install it. |
| Description: | Black imaging unit is not installed. Install it. |
| Causes: | The black drum unit is not installed. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove and reinstall the black drum unit 4) Install the waste toner container. 5) Close the front cover. |
| Error code: | C3-5512 |
| Display: | Black imaging unit is not compatible. Check user`s guide |
| Description: | Black imaging unit is not compatible. Check user`s guide |
| Causes: | Black drum unit is not compatible. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. 3) Remove the black drum unit. Check if the drum unit is compatible with the machine. 4) If the drum unit is not a samsung genuine, replace it with a new one. |
| Error code: | C5-1110 |
| Display: | Prepare new Transfer belt |
| Description: | Prepare new transfer belt unit. |
| Causes: | The life of the ITB Unit expires soon |
| Remedy: | 1) Order new ITB unit. |
| Error code: | C5-1120 |
| Display: | Replace new Transfer belt |
| Description: | Replace new transfer belt unit. |
| Causes: | The life of the ITB Unit has expired. |
| Remedy: | 1) Turn the machine off. 2) Remove the ITB cleaner. 3) Remove the ITB Unit. 4) Install new ITB Unit and ITB cleaner. 5) Turn the machine on. 6) Enter SVC mode. 7) Select “TRANSFER” (INFORMATION > Supply Status > Field Replacement Unit > TRANSFER) 8) Select “ITB”. The “RESET” button will be activated. Click “RESET” to clear the ITB count. 9) Exit SVC mode by pushing the home button. |
| Error code: | C5-2120 |
| Description: | Prepare new transfer belt unit. |
| Causes: | The life of the ITB cleaner has expired. |
| Remedy: | 1) Turn the machine off. 2) Replace the ITB cleaner. 3) Turn the machine on. |
| Error code: | C6-1120 |
| Display: | Replace new Fuser unit |
| Description: | Replace with new fuser unit |
| Causes: | The life of the fuser unit has expired. |
| Remedy: | 1) Turn the machine off. 2) Replace the fuser unit(JC91-01157A (220V) /JC91-01158A (110V)). 3) Turn the machine on. |
| Error code: | C6-1310 |
| Display: | Fuser unit is not installed. Install it |
| Description: | Fuser unit is not installed. Install it. |
| Causes: | The fuser unit is not installed or fuser unit connector is not connected properly. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Open the side cover. Check if the fuser unit is installed. If not, install the fuser unit. 4) If the fuser unit is installed, remove it. 5) Check if the fuser draw connector (JC39–01677A) is broken or defective. 6) Install the fuser unit. 7) If the problem persists, replace the fuser unit(JC91-01157A (220V) /JC91-01158A (110V)). |
| Error code: | C7-1110 |
| Display: | Waste toner container is almost full. Order new one. |
| Description: | Waste toner Full Replace new one |
| Causes: | The waste toner container is at the end of its life. |
| Remedy: | 1) Print the supply information report. Check the life remaining of the waste toner container. 2) If its life is at the end, turn the machine off and replace the waste toner container with new one. |
| Error code: | C7-1130 |
| Description: | Waste toner container is full. Replace it. |
| Causes: | The life of the waste toner container has expired. |
| Remedy: | 1) Open the front cover. 2) Remove the waste toner container. Install a new waste toner container. 3) Close the front cover. |
| Error code: | C7-1311 |
| Display: | Waste toner container is not installed. Install it. |
| Description: | Not Installed Waste tank |
| Causes: | The waste toner container is not installed |
| Remedy: | 1) Check if the waste toner container is installed properly. 2) Remove and reinstall the waste toner container. |
| Error code: | C8-2130 |
| Description: | Replace with new yellow developer unit |
| Causes: | The life of the yellow developer unit expires has expired. |
| Remedy: | 1) Turn the machine off. 2) Replace the yellow developer unit. 3) Turn the machine on then print the test page. |
| Error code: | C8-2210, C8-2310 |
| Display: | Yellow Developer Failure: #C8-2210. Turn off then on Yellow Developer Failure: #C8-2310. Install yellow developer unit again |
| Description: | Yellow Developer Failure: #C8-2210. Turn off then on Yellow Developer Failure: #C8-2310. Install yellow developer unit again |
| Causes: | The yellow developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the yellow developer unit. 8) If the problem persists, replace the yellow developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-2313, C8-231G |
| Description: | Yellow Developer Failure: #C8-2313. Turn off then on. Please call for service if the problem persists Y Development unit Failure: #C8-231G. Turn off then on. Please call for service if the problem persists |
| Causes: | The yellow developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the yellow developer unit. 8) If the problem persists, replace the yellow developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-3130 |
| Description: | Replace with new magenta developer unit |
| Causes: | The life of the magenta developer unit expires has expired. |
| Remedy: | 1) Turn the machine off. 2) Replace the magenta developer unit. 3) Turn the machine on then print the test page. |
| Error code: | C8-3210, C8-3310 |
| Display: | Magenta Developer Failure: #C8-3210. Turn off then on Magenta Developer Failure: #C8-3310. Install magenta developer unit again. |
| Description: | Magenta Developer Failure: #C8-3210. Turn off then on Magenta Developer Failure: #C8-3310. Install magenta developer unit again |
| Causes: | The magenta developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the magenta developer unit. 8) If the problem persists, replace the magenta developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-3313, C8-331G |
| Description: | Magenta Developer Failure: #C8-3313. Turn off then on. Please call for service if the problem persists M Development unit Failure: #C8-331G. Turn off then on. Please call for service if the problem persists |
| Causes: | The magenta developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the magenta developer unit. 8) If the problem persists, replace the magenta developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-4130 |
| Description: | Replace with new cyan developer unit |
| Causes: | The life of the cyan developer unit expires has expired. |
| Remedy: | 1) Turn the machine off. 2) Replace the cyan developer unit. 3) Turn the machine on then print the test page. |
| Error code: | C8-4210, C8-4310 |
| Display: | Cyan Developer Failure: #C8-4210. Turn off then on Cyan Developer Failure: #C8-4310. Install cyan developer unit again |
| Description: | Cyan Developer Failure: #C8-4210. Turn off then on Cyan Developer Failure: #C8-4310. Install cyan developer unit again |
| Causes: | The cyan developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the cyan developer unit. 8) If the problem persists, replace the cyan developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-4313, C8-431G |
| Description: | Cyan Developer Failure: #C8-4313. Turn off then on. Please call for service if the problem persists C Development unit Failure: #C8-431G. Turn off then on. Please call for service if the problem persists |
| Causes: | The cyan developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the cyan developer unit. 8) If the problem persists, replace the cyan developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-5130 |
| Description: | Replace with new black developer unit |
| Causes: | The life of the black developer unit expires has expired. |
| Remedy: | 1) Turn the machine off. 2) Replace the black developer unit. 3) Turn the machine on then print the test page. |
| Error code: | C8-5210, C8-5310 |
| Display: | Black Developer Failure: #C8-5210. Turn off then on Black Developer Failure: #C8-5310. Install black developer unit again |
| Description: | Black Developer Failure: #C8-5210. Turn off then on Black Developer Failure: #C8-5310. Install black developer unit again |
| Causes: | The black developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the black developer unit. 8) If the problem persists, replace the black developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C8-5313, C8-531G |
| Description: | Black Developer Failure: #C8-5313. Turn off then on. Please call for service if the problem persists K Development unit Failure: #C8-531G. Turn off then on. Please call for service if the problem persists |
| Causes: | The black developer unit has a problem with toner supply or sensor calibration. |
| Remedy: | 1) Turn the machine off then on. If the error persists, check the following. 2) Open the front cover. Then, remove the waste toner container. 3) Check if the toner supply pipe is blocked. If it is closed, open it. (Lever is in horizontal position.) 4) Check if deve unit connector(4 pin) is connected correctly. Check if the pin is deformed. 5) Install the waste toner container. Close the front cover. 6) Turn the machine off then on. 7) If the problem persists, remove and reinstall the black developer unit. 8) If the problem persists, replace the black developer unit. 9) If the problem persists, check the toner supply motor. Check the motor harness connection. If the connection is OK, replace the toner supply motor. 10)If the problem persists, replace the main board. |
| Error code: | C9-2110 |
| Description: | Prepare with new transfer roller. |
| Causes: | The life of the second transfer roller(T2) expires soon. |
| Remedy: | 1) Order the transfer roller Assy. |
| Error code: | C9-2110, C9-2120 |
| Display: | Replace with new Transfer roller. |
| Description: | Replace with new Transfer roller. |
| Causes: | The life of the second transfer roller(T2) expires soon or has expired. |
| Remedy: | 1) Open the side cover. 2) Replace the second transfer roller(JC95-01942A) with a new one. 3) Close the side cover. 4) Enter SVC mode. • To enter the service mode, tap "Service Mode" App. When the password dialog box appears, enter “1934” and press the “OK” button. 5) Select “TRANSFER” (INFORMATION > Supply Status > Field Replacement Unit > TRANSFER) 6) Select “T2 Roller”. The “RESET” button will be activated. Click “RESET” to clear the T2 Roller count. 7) Exit the SVC mode by pushing the home button. |
| Error code: | C9-2220 |
| Display: | TR Failure: #C9-2220. Install transfer roller again. |
| Description: | TR Failure: #C9-2220. Install transfer roller again |
| Causes: | The life of the second transfer roller(T2) is not installed. |
| Remedy: | 1) Open the side cover. 2) Remove and reinstall the second transfer roller. 3) Close the side cover. 4) If the problem persists, replace the HVPS board(JC44–00212A). |
| Error code: | H1-1311, H1-1312, H1-1314 |
| Description: | Paper jam in Tray 3. |
| Causes: | Paper jam has occurred in tray3. (Pick up unit connection is defective. / Pickup rollers are defective. / pre Feed sensor is defective.) |
| Remedy: | 1) Open the DCF Take Away-Cover. Remove the jammed paper. 2) Remove tray3. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray3. 3) If this jam error occurs frequently, check the rollers below. a) Remove the tray3 and tray4. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller. 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the DCF pick up unit1. Check if the pre feed sensor cable is connected correctly. b) Check if the sensor cable on DCF PBA is connected correctly. c) If the connection is OK, replace the pre feed sensor(0604-001490). d) Install the DCF pick up unit1. 5) If the problem persists after checking step 3~4, check the following : a) Remove the DCF pick up unit1. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the DCF pick up unit1(JC93-01087A) or defective part. 6) Check the DCF feed motor. a) Check if the DCF feed motor cable is connected correctly. b) If the connection is OK, replace the DCF feed drive unit(JC93-01135A). 7) Check the DCF pick up motor. a) Check if the DCF pick up motor cable is connected correctly. b) If the connection is OK, replace the DCF pick up drive unit(JC93-01063A). |
| Error code: | H1-1313, H1-1413 |
| Description: | Paper jam inside of machine |
| Causes: | Paper jam has occurred inside the machine |
| Remedy: | • H1-1313 : (Media Feeding from Tray3) The leading edge of the paper has not reached the Feed 2 sensor within the specified time • H1-1413 : (Media Feeding from Tray4) The leading edge of the paper has not reached the Feed 2 sensor within the specified time 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute the feed 2 sensor test. b) Check connection between the feed 2 sensor and main board. c) If the connection is OK, replace the feed 2 sensor. d) If the feed 2 sensor is normal, check the feed motor. e) Execute feed motor test. f) Check if the feed motor cable is connected correctly. g) If the connection is OK, replace the feed/MP drive unit. |
| Error code: | H1-1315, H1-1317, H1-1318 |
| Description: | Paper jam in Tray 3. |
| Causes: | Paper jam has occurred in tray3. (Pick up unit connection is defective. / Pickup rollers are defective. / pre Feed sensor is defective.) |
| Remedy: | 1) Open the DCF Take Away-Cover. Remove the jammed paper. 2) Remove tray3. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray3. 3) If this jam error occurs frequently, check the rollers below. a) Remove the tray3 and tray4. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller. 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the DCF pick up unit1. Check if the pre feed sensor cable is connected correctly. b) Check if the sensor cable on DCF PBA is connected correctly. c) If the connection is OK, replace the pre feed sensor(0604-001490). d) Install the DCF pick up unit1. 5) If the problem persists after checking step 3~4, check the following : a) Remove the DCF pick up unit1. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the DCF pick up unit1(JC93-01087A) or defective part. 6) Check the DCF feed motor. a) Check if the DCF feed motor cable is connected correctly. b) If the connection is OK, replace the DCF feed drive unit(JC93-01135A). 7) Check the DCF pick up motor. a) Check if the DCF pick up motor cable is connected correctly. b) If the connection is OK, replace the DCF pick up drive unit(JC93-01063A). |
| Error code: | H1-1322 |
| Display: | Tray 3 cassette is pulled out. Insert it properly. |
| Description: | Tray 3 cassette is pulled out. Insert it properly. |
| Causes: | Tray 3 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert tray3 correctly. 2) If the problem persists, remove tray3 and tray4. Look inside machine. 3) Check if the auto size sensor cable is connected correctly. Unplug and reconnect it. 4) If the connection is OK, replace the auto size sensor(JC93-00018A). 5) If the problem persists, replace the DCF board(JC92-02453A). |
| Error code: | H1-1351, H1-1352, H1-1354 |
| Display: | Paper is low in Tray 3. Load paper. Paper is empty in tray 3. Load paper. |
| Description: | Paper is low in Tray 3. Load paper. Paper is empty in Tray 3. Load paper. |
| Causes: | Paper in the tray is less than 10% of specification. / The photo sensor is defective. |
| Remedy: | 1) Remove tray3. Load the paper in tray3. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the DCF pick up unit1. b) Check if the photo sensor in the DCF pick up unit1 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-03199A) is defective, replace it. |
| Error code: | H1-1353 |
| Display: | Input System Failure #H1-1353 : Pull Tray 3 out and insert it. |
| Description: | Input System Failure #H1-1353 : Pull Tray 3 out and insert it. |
| Causes: | The paper is not fed from tray3. |
| Remedy: | 1) Remove and insert tray3 correctly. 2) Turn the machine off then on. 3) If the problem persists, turn the machine off. 4) Remove the Bracket Rear Cover after removing 5 screws. 5) Check if the connection between the DCF pick up drive and DCF board is correct. 6) If the connection is OK, replace the pick up drive unit(JC93-00442A). 7) If the problem persists, check the following. a) Remove the DCF pick up unit1. b) Check if the photo sensor in the DCF pick up unit1 is contaminated, clean it. c) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | H1-1411, H1-1412 |
| Description: | Paper jam in Tray 4. |
| Causes: | Paper jam has occurred in tray4. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the DCF Take Away-Cover. Remove the jammed paper. 2) Remove tray4. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray4. 3) If this jam error occurs frequently, check the rollers below. a) Remove tray3 and tray4. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A). 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the DCF pick up unit2. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on DCF board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001381). d) Install the DCF pick up unit2. 5) If the problem persists after checking step 3~4, check the following : a) Remove the DCF pick up unit2. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the DCF pick up unit2(JC93-00513A) or defective part. 6) Check the DCF feed motor. a) Check if the DCF feed motor cable is connected correctly. b) If the connection is OK, replace the DCF feed drive unit(JC93-00447A). 7) Check the DCF pick up motor. a) Check if the DCF pick up motor cable is connected correctly. b) If the connection is OK, replace the DCF pick up drive unit(JC93-00442A). |
| Error code: | H1-1417, H1-1418 |
| Display: | Paper jam in Tray 4. |
| Description: | Paper jam in Tray 4. |
| Causes: | Paper jam has occurred in tray4. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the DCF Take Away-Cover. Remove the jammed paper. 2) Remove tray4. Remove the jammed paper. Close the DCF Take Away-Cover and insert tray4. 3) If this jam error occurs frequently, check the rollers below. a) Remove tray3 and tray4. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93-00540A). 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the DCF pick up unit2. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on DCF board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001381). d) Install the DCF pick up unit2. 5) If the problem persists after checking step 3~4, check the following : a) Remove the DCF pick up unit2. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the DCF pick up unit2(JC93-00513A) or defective part. 6) Check the DCF feed motor. a) Check if the DCF feed motor cable is connected correctly. b) If the connection is OK, replace the DCF feed drive unit(JC93-00447A). 7) Check the DCF pick up motor. a) Check if the DCF pick up motor cable is connected correctly. b) If the connection is OK, replace the DCF pick up drive unit(JC93-00442A). |
| Error code: | H1-1422 |
| Display: | Tray 4 cassette is pulled out. Insert it properly. |
| Description: | Tray 4 cassette is pulled out. Insert it properly. |
| Causes: | Tray 4 is pulled out or the auto size sensor connector is not connected or is broken. |
| Remedy: | 1) Remove and insert tray4 correctly. 2) If the problem persists, remove tray3 and tray4. Look inside machine. 3) Check if the auto size sensor cable is connected correctly. Unplug and reconnect it. 4) If the connection is OK, replace the auto size sensor(JC93-00018A). 5) If the problem persists, replace the DCF board(JC92-02453A). |
| Error code: | H1-1451, H1-1452, H1-1454 |
| Display: | Paper is low in Tray 4. Load paper. Paper is empty in tray 4. Load paper. |
| Description: | Paper is low in Tray 4. Load paper. Paper is empty in Tray 4. Load paper. |
| Causes: | Paper in tray4 is less than 10%. / The photo sensor is defective. |
| Remedy: | 1) Remove tray4. Load the paper in tray4. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the DCF pick up unit2. b) Check if the photo sensor in the DCF pick up unit2 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-03199A) is defective, replace it. |
| Error code: | H1-1453 |
| Display: | Input System Failure #H1-1453 : Pull Tray 4 out and insert it. |
| Description: | Input System Failure #H1-1453 : Pull Tray 4 out and insert it. |
| Causes: | The paper is not fed from tray4. |
| Remedy: | 1) Remove and insert tray4 correctly. 2) Turn the machine off then on. 3) If the problem persists, turn the machine off. 4) Remove the Bracket Rear Cover after removing 5 screws. 5) Check if the connection between the DCF pick up drive and DCF board is correct. 6) If the connection is OK, replace the pick up drive unit(JC93-00442A). 7) If the problem persists, check the following. a) Remove the DCF pick up unit2. b) Check if the photo sensor in the DCF pick up unit2 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | H1-2311, H1-2312 |
| Description: | Paper Jam in tray 3. After open the door & remove paper, Close the door |
| Causes: | Paper jam has occurred in HCF tray. (Pick up unit connection is defective. / Pickup rollers are defective. / pre feed sensor is defective.) |
| Remedy: | 1) Open the HCF Take Away-Cover. Remove the jammed paper. 2) Remove HCF tray. Remove the jammed paper. Close the HCF Take Away-Cover and insert HCF tray. 3) If this jam error occurs frequently, check the rollers below. a) Remove the HCF tray. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller. 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the HCF pick up unit. Check if the pre feed sensor cable is connected correctly. b) Check if the sensor cable on HCF PBA is connected correctly. c) If the connection is OK, replace the pre feed sensor(0604-001490). d) Install the HCF pick up unit. 5) If the problem persists after checking step 3~4, check the following : a) Remove the HCF pick up unit. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the HCF pick up unit(JC93-01139A) or defective part. 6) Check the HCF feed motor. a) Check if the HCF feed motor cable is connected correctly. b) If the connection is OK, replace the HCF feed drive unit(JC93-01114A). 7) Check the HCF pick up motor. a) Check if the HCF pick up motor cable is connected correctly. b) If the connection is OK, replace the HCF pick up drive unit(JC93-01115A). |
| Error code: | H1-2313 |
| Description: | Paper jam inside of machine |
| Causes: | The leading edge of the paper has not reached the Feed 2 sensor within the specified time |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute the feed 2 sensor test. b) Check connection between the feed 2 sensor and main board. c) If the connection is OK, replace the feed 2 sensor. d) If the feed 2 sensor is normal, check the feed motor. e) Execute feed motor test. f) Check if the feed motor cable is connected correctly. g) If the connection is OK, replace the feed/MP drive unit. |
| Error code: | H1-2317, H1-2318 |
| Description: | Paper Jam in tray 3. After open the door & remove paper, Close the door |
| Causes: | Paper jam has occurred in HCF tray. (Pick up unit connection is defective. / Pickup rollers are defective. / pre feed sensor is defective.) |
| Remedy: | 1) Open the HCF Take Away-Cover. Remove the jammed paper. 2) Remove HCF tray. Remove the jammed paper. Close the HCF Take Away-Cover and insert HCF tray. 3) If this jam error occurs frequently, check the rollers below. a) Remove the HCF tray. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller. 4) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the HCF pick up unit. Check if the pre feed sensor cable is connected correctly. b) Check if the sensor cable on HCF PBA is connected correctly. c) If the connection is OK, replace the pre feed sensor(0604-001490). d) Install the HCF pick up unit. 5) If the problem persists after checking step 3~4, check the following : a) Remove the HCF pick up unit. Check if the sensor and actuator are assembled correctly. b) When pushing the pickup lever, check if the pick up rollers are down. c) Replace the HCF pick up unit(JC93-01139A) or defective part. 6) Check the HCF feed motor. a) Check if the HCF feed motor cable is connected correctly. b) If the connection is OK, replace the HCF feed drive unit(JC93-01114A). 7) Check the HCF pick up motor. a) Check if the HCF pick up motor cable is connected correctly. b) If the connection is OK, replace the HCF pick up drive unit(JC93-01115A). |
| Error code: | H1-2320 |
| Description: | Tray 3 door is open. Close it. |
| Causes: | HCF Takeaway-Cover is open. / Side door open switch harness or connector is defective. |
| Remedy: | 1) Open and close the HCF Take away-Cover correctly. 2) Check if the side door open switch is connected correctly. Unplug and reconnect it. 3) If the connection is OK, replace the side door open switch(JC39-02279A). 4) If the problem persists, replace the HCF PBA(JC92-02738B). |
| Error code: | H1-2322 |
| Description: | Tray 3 cassette is pulled out. Insert it properly. |
| Causes: | HCF Tray is pulled out or the Tray insertion sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert HCF tray correctly. 2) If the problem persists, remove HCF tray. Look inside machine. 3) Check if the tray insertion sensor is connected correctly. Unplug and reconnect it. 4) If the connection is OK, replace the tray insertion sensor(0604–001393). 5) If the problem persists, replace the HCF PBA(JC92-02738B). |
| Error code: | H1-2330 |
| Description: | Tray Failure: #H1-2330. Check tray 3 connection & turn off then on. Call for service if the problem persists |
| Causes: | A communication error between the optional tray and the main machine has occurred. |
| Remedy: | 1) Turn the machine off. 2) Remove the Rear Cover. 3) Check the connection of HCF PBA. If the interface connector is defective, replace it. 4) If the problem persists, replace the HCF PBA. |
| Error code: | H1-2351, H1-2352 |
| Description: | Paper is low in Tray 3. Load paper. Paper is empty in Tray 3. Load paper. |
| Causes: | Paper in the HCF tray is less than 10% of specification. / The photo sensor is defective. |
| Remedy: | 1) Remove HCF tray. Load the paper in HCF tray. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the HCF pick up unit. b) Check if the photo sensor in the HCF pick up unit is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-04399A) is defective, replace it. |
| Error code: | H1-2353 |
| Description: | Tray Failure: #H1-2353. Pull tray 3 out and insert it. Call for service if the problem persists |
| Causes: | The paper is not fed from HCF tray. |
| Remedy: | 1) Remove and insert HCF tray correctly. 2) Turn the machine off then on. 3) If the problem persists, turn the machine off. 4) Remove the Rear Cover. 5) Check if the connection between the HCF pick up drive unit and HCF PBA is correct. 6) If the connection is OK, replace the HCF pick up drive unit(JC93-01115A). 7) If the problem persists, check the following. a) Remove the HCF pick up unit. b) Check if the photo sensor in the HCF pick up unit is contaminated, clean it. c) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | H1-4411, H1-4412, H1-4413 |
| Description: | Paper jam in Tray 4. Paper jam in Tray 5. |
| Causes: | Paper jam has occurred in LCT. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the LCT Top Cover. Remove the jammed paper. And, close the LCT Top Cover. 2) If this jam error occurs frequently, check the rollers below. a) Open the LCT Top Cover. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93–01091A). 3) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the LCT pick up unit. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on LCT board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001490). d) Check if the sensor and actuator are assembled correctly. e) Install the LCT pick up unit. 4) Check the LCT feed motor and pick-up motor. a) Check if the LCT feed motor and pick-up motor cables are connected correctly. b) If the connection is OK, replace the LCT feed drive unit(JC93-01112A). |
| Error code: | H1-4417, H1-4418 |
| Description: | Paper jam in Tray 4. Paper jam in Tray 5. |
| Causes: | Paper jam has occurred in LCT. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the LCT Top Cover. Remove the jammed paper. And, close the LCT Top Cover. 2) If this jam error occurs frequently, check the rollers below. a) Open the LCT Top Cover. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93–01091A). 3) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the LCT pick up unit. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on LCT board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001490). d) Check if the sensor and actuator are assembled correctly. e) Install the LCT pick up unit. 4) Check the LCT feed motor and pick-up motor. a) Check if the LCT feed motor and pick-up motor cables are connected correctly. b) If the connection is OK, replace the LCT feed drive unit(JC93-01112A). |
| Error code: | H1-4420, H1-4520 |
| Description: | Tray 4 door is open. Close it Tray 5 door is open. Close it |
| Causes: | LCT Top Cover is open. / I/L-Switch harness or connector is defective. |
| Remedy: | 1) Open and close the LCT Top Cover correctly. 2) If the problem persists, check the following. a) Check if I/L-Switch(Top Door Open Switch)(JC39-02346A) is not operating normally. If it is defective, replace it. b) If the Top Door Open Switch is OK, replace the LCT PBA(JC92-02738C). |
| Error code: | H1-4422, H1-4522 |
| Description: | Tray 4 cassette is pulled out. Insert it properly. Tray 5 cassette is pulled out. Insert it properly. |
| Causes: | LCT is pulled out or installation detect sensor is not connected or broken. |
| Remedy: | 1) Detach and Attach the LCT 2) If the problem persists, detach LCT and check inside machine. 3) Remove the Front Cover and Rear Cover. Check the connection of the installation detect sensors. And, unplug and reconnect it. 4) If the connection is OK, replace the installation detect sensor (0604-01393). 5) If the problem persists, replace the LCT PBA (JC92–02738C). |
| Error code: | H1-4430, H1-4530 |
| Description: | Tray Failure: #H1-4430. Check tray 4 connection Tray Failure: #H1-4530. Check tray 5 connection |
| Causes: | A communication error between the LCT and the main machine has occurred. |
| Remedy: | 1) Turn the machine off. 2) Remove the LCT Cover-Right and LCT Cover-Rear. 3) Check the connection of LCT PBA. If the interface connector(JC39–02294A) is defective, replace it. 4) If the problem persists, replace the LCT PBA. |
| Error code: | H1-4451, H1-4452 |
| Description: | Paper is low in Tray 4. Load paper. / Paper is empty in Tray 4. Load paper. Paper is low in Tray 4. Load paper. / Paper is empty in Tray 4. Load paper. |
| Causes: | Paper in the LCT is less than 20% of specification. / The photo sensor is defective. |
| Remedy: | 1) Open the LCT Top Cover. Load the paper in LCT. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the LCT pick up unit. b) Check if the photo sensor in the LCT pick up unit1 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-04276A) is defective, replace it. |
| Error code: | H1-4453, H1-4553 |
| Description: | Input System Failure #H1-4453 : Pull Tray 4 out and insert it. Input System Failure #H1-4553 : Pull Tray 5 out and insert it. |
| Causes: | The paper is not fed from the LCT. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off. 3) Remove the Cover-Right and Cover-Rear after removing 16 screws. 4) Check if the connection between the LCT pick up drive and LCT PBA is correct. 5) If the connection is OK, replace the drive unit(JC93–01112A). 6) If the problem persists, check the following. a) Remove the LCT pick up unit. b) Check if the photo sensor in the LCT pick up unit is contaminated, clean it. c) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | H1-4511, H1-4512, H1-4513 |
| Description: | Paper jam in Tray 4. Paper jam in Tray 5. |
| Causes: | Paper jam has occurred in LCT. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the LCT Top Cover. Remove the jammed paper. And, close the LCT Top Cover. 2) If this jam error occurs frequently, check the rollers below. a) Open the LCT Top Cover. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93–01091A). 3) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the LCT pick up unit. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on LCT board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001490). d) Check if the sensor and actuator are assembled correctly. e) Install the LCT pick up unit. 4) Check the LCT feed motor and pick-up motor. a) Check if the LCT feed motor and pick-up motor cables are connected correctly. b) If the connection is OK, replace the LCT feed drive unit(JC93-01112A). |
| Error code: | H1-4517, H1-4518 |
| Description: | Paper jam in Tray 4. Paper jam in Tray 5. |
| Causes: | Paper jam has occurred in LCT. (Pick up unit connection is defective. / Pickup rollers are defective. / Feed sensor is defective.) |
| Remedy: | 1) Open the LCT Top Cover. Remove the jammed paper. And, close the LCT Top Cover. 2) If this jam error occurs frequently, check the rollers below. a) Open the LCT Top Cover. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller(JC93–01091A). 3) If pick up/ reverse/ forward rollers have no problem, check the following. a) Remove the LCT pick up unit. Check if the feed sensor cable is connected correctly. b) Check if the sensor cable on LCT board is connected correctly. c) If the connection is OK, replace the feed sensor(0604-001490). d) Check if the sensor and actuator are assembled correctly. e) Install the LCT pick up unit. 4) Check the LCT feed motor and pick-up motor. a) Check if the LCT feed motor and pick-up motor cables are connected correctly. b) If the connection is OK, replace the LCT feed drive unit(JC93-01112A). |
| Error code: | H1-4551, H1-4552 |
| Description: | Paper is low in Tray 4. Load paper. / Paper is empty in Tray 4. Load paper. Paper is low in Tray 4. Load paper. / Paper is empty in Tray 4. Load paper. |
| Causes: | Paper in the LCT is less than 20% of specification. / The photo sensor is defective. |
| Remedy: | 1) Open the LCT Top Cover. Load the paper in LCT. 2) If paper is loaded but error message has not disappeared, check the following. a) Remove the LCT pick up unit. b) Check if the photo sensor in the LCT pick up unit1 is contaminated. If so, clean it. c) If the photo sensor(0604-001393) is defective, replace it. d) If the actuator(JC66-04276A) is defective, replace it. |
| Error code: | H1-5323 |
| Display: | Tray door is open. Close the door |
| Description: | Tray door is open. Close the door |
| Causes: | DCF Takeaway-Cover is open. / I/L-Switch harness or connector is defective. |
| Remedy: | 1) Open and close the DCF Take away-Cover correctly. 2) If the problem persists, check the following. a) Check if I/L-Switch(HARNESS-DCF COVER OPEN)(JC39–01696A) is not operating normally. If it is defective, replace it. b) If the I/L Switch is OK, replace the DCF board(JC92–02453A). |
| Error code: | H1-5330 |
| Display: | DCF Failure #H1-5330. Check internal DCF connection. |
| Description: | DCF Failure #H1-5330. Check internal DCF connection. |
| Causes: | A communication error between the optional tray and the main machine has occurred. |
| Remedy: | 1) Lift up and release the DCF unit from the machine. 2) Remove the Bracket Rear Cover after removing 5 screws. 3) Check if the interface connector is connected to the DCF board. If the interface connector(JC39–01690A) is defective, replace it. 4) If the problem persists, replace the DCF board. |
| Error code: | M1-1113 |
| Display: | SMART PANEL:Paper jam in tray 1. |
| Description: | Paper jam in Tray 1. |
| Causes: | Paper jam has occurred in tray1. |
| Remedy: | 1) Open the side cover and check if a foreign substance or paper is jammed inside the machine. 2) Remove tray1 and remove the jammed paper. 3) If this jam error occurs frequently, check the rollers of the pick up unit1. a) Remove tray1 and tray2. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller. 4) If the problem persists, check the pick-up unit1. a) Check if the pre-feed sensor is connected correctly. If the sensor is defective, replace it. b) If there is any defective part in pick-up unit 1, replace it or pick up unit 1. 5) If the problem persists, replace the pickup drive unit 1. |
| Error code: | M1-1211, M1-1213 |
| Description: | Paper jam in Tray 2. |
| Causes: | Paper jam has occurred in tray2. |
| Remedy: | 1) Open the side cover and check if a foreign substance or paper is jammed inside the machine. 2) Remove tray2 and remove the jammed paper. 3) If this jam error occurs frequently, check the rollers of the pick up unit2. a) Remove tray1 and tray2. b) Check if the pick up/ reverse/ forward rollers are assembled correctly. c) If the pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller. 4) If the problem persists, check the pick-up unit2. a) Check if the pre-feed sensor is connected correctly. If the sensor is defective, replace it. b) If there is any defective part in pick-up unit 2, replace it or pick up unit 2. 5) If the problem persists, check the followings. a) Enter SVC mode, Execute Feed sensor test. • Check a connected harness between Feed sensor and main board. • If no matter at harness, Please replace Feed sensor. b) If the feed sensor works, check a Pick up/Feed drive unit at SVC mode. i) Check the connected harness at drive unit. ii) If the harness is OK, please replace a drive unit. |
| Error code: | M1-1610, M1-1613 |
| Description: | Paper jam in MP Tray. |
| Causes: | Paper jam has occurred in MP tray. |
| Remedy: | 1) Open the side cover. Remove the jammed paper from the MP tray. 2) If this jam error occurs frequently, check the rollers of the MP unit. a) Check if MP pick up/ reverse/ forward rollers are assembled correctly. b) If the MP pick up/ reverse/ forward rollers are worn out or contaminated, replace the defective roller. 3) If the problem persists, check if the MP solenoid operates correctly. a) Enter SVC mode. Execute MP solenoid test. b) If the MP solenoid operation is abnormal, check the harness connection of MP unit. c) If the harness has no defects, replace the MP solenoid. 4) If the problem persists, please check the followings. a) Enter SVC mode. Execute the regi sensor test. i) If the Regi sensor doesn’t work, check below. • Check the harness connection between Regi sensor and main board. • If the harness connection is OK, replace the Regi sensor. ii) If the Regi sensor works normally, check the Feed/MP drive unit at SVC mode. • Check the harness connection of the Feed/MP drive unit. • If the harness connection is OK, replace the Feed/MP drive unit. |
| Error code: | M1-3122 |
| Display: | Tray 1 cassette is pulled out. Insert it properly. |
| Description: | Tray 1 cassette is pulled out. Insert it properly. |
| Causes: | Tray 1 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert Tray1 correctly. 2) If Tray1 is not locked or pulled out without holding the locking lever, remove Tray1. 3) Check if foreign substance or paper is inside the space between Tray1,2. If so, please remove it. 4) If the problem persists, check that the auto size sensor is connected properly. 5) If the problem persists, replace the main board(JC92–02452A). |
| Error code: | M1-3222 |
| Display: | Tray 2 cassette is pulled out. Insert it properly. |
| Description: | Tray 2 cassette is pulled out. Insert it properly. |
| Causes: | Tray 2 is pulled out or the auto size sensor connector is not connected or broken. |
| Remedy: | 1) Remove and insert Tray2 correctly. 2) If Tray2 is not locked or pulled out without holding the locking lever, remove Tray2. 3) Check if foreign substance or paper is inside the space between Tray1,2. If so, please remove it. 4) If the problem persists, check that the auto size sensor is connected properly. 5) If the problem persists, replace the main board(JC92–02452A). |
| Error code: | M1-4111 |
| Display: | Input System Failure #M1-4111 : Pull Tray 1 out and insert it. |
| Description: | Input System Failure #M1–4111 : Pull Tray 1 out and insert it. |
| Causes: | The paper is not fed from tray1. |
| Remedy: | 1) Remove tray1 and re-install it. 2) If the problem persists, turn the machine off then on. 3) Enter SVC mode. Execute pickup motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100-0370) 4) If the pick up motor operation is abnormal, turn the machine off. 5) Remove the rear cover. 6) Check if the connection between pickup drive unit1 and main board is secure. 7) If the connection is OK, replace the pickup drive unit(JC93-00442A). 8) If the problem persists, check the pickup unit1. a) Check if the photo sensor in the pickup unit1 is defective. b) If the sensor(0604–001393) is defective, replace it. |
| Error code: | M1-4211 |
| Display: | Input System Failure #M1-4211 : Pull Tray 2 out and insert it. |
| Description: | Input System Failure #M1-4211 : Pull Tray 2 out and insert it. |
| Causes: | The paper is not fed from tray2. |
| Remedy: | 1) Remove tray2 and re-install it. 2) If the problem persists, turn the machine off then on. 3) Enter SVC mode. Execute pickup motor test. (Diagnostics > Engine Diagnostics > Engine Test Routines > 100-0380) 4) If the pick up motor operation is abnormal, turn the machine off. 5) Remove the rear cover. 6) Check if the connection between pickup drive unit2 and main board is secure. 7) If the connection is OK, replace the pickup drive unit(JC93-00442A). 8) If the problem persists, check the pickup unit2. a) Check if the photo sensor in the pickup unit2 is defective. b) If the sensor(0604–001393) is defective, replace it. |
| Error code: | M1-5111, M1-5112 |
| Display: | Paper is low in Tray 1. Load paper. Paper is empty in Tray 1. Load paper. |
| Description: | Paper is low in Tray 1. Load paper. Paper is empty in Tray 1. Load paper. |
| Causes: | Paper in the tray1 is less than 10%. / The photo sensor is defective. |
| Remedy: | 1) Remove tray 1. Load paper in the tray. And insert tray 1. 2) If paper is loaded but error message has not disappeared, check the following: a) Turn the machine off. Open the Side Cover. b) Remove Pick-Up Unit1. c) If the photo sensor is contaminated, clean it. d) If the photo sensor is defective, replace it(0604–001393). e) If the actuator is defective, replace it(JC66-03199A). |
| Error code: | M1-5113, M1-5120 |
| Description: | Paper is low in Tray 1. Load paper. Paper is empty in Tray 1. Load paper. |
| Causes: | Paper in the tray1 is less than 10%. / The photo sensor is defective. |
| Remedy: | 1) Remove tray 1. Load paper in the tray. And insert tray 1. 2) If paper is loaded but error message has not disappeared, check the following: a) Turn the machine off. Open the Side Cover. b) Remove Pick-Up Unit1. c) If the photo sensor is contaminated, clean it. d) If the photo sensor is defective, replace it(0604–001393). e) If the actuator is defective, replace it(JC66-03199A). |
| Error code: | M1-5211, M1-5212 |
| Display: | Paper is low in Tray 2. Load paper. Paper is empty in Tray 2. Load paper. |
| Description: | Paper is low in Tray 2. Load paper. Paper is empty in Tray 2. Load paper. |
| Causes: | Paper in the tray is less than 10% of specification. / The photo sensor is defective. |
| Remedy: | 1) Remove tray 2. Load paper in the tray, and insert the tray 2. 2) If paper is loaded but error message has not disappeared, check the following : a) Turn the machine off. Open the Side Cover. b) Remove Pick-Up Unit2. c) If the photo sensor is contaminated, clean it. d) If the photo sensor is defective, replace it(0604–001393). e) If the actuator is defective, replace it(JC66-03199A). |
| Error code: | M1-5612 |
| Display: | Paper is empty in MP Tray. Load paper. |
| Description: | Paper is empty in MP Tray. Load paper. |
| Causes: | Paper in the MP tray is less than 10%. / The photo sensor is defective. |
| Remedy: | 1) Load the paper in the MP tray. 2) If paper is loaded but error message has not disappeared, check the following : a) If the photo sensor is contaminated, clean it. b) If the photo sensor is defective, replace it(0604–001393). c) If the actuator is defective, replace it(JC66-03217A). |
| Error code: | M2-1114, M2-1117 |
| Description: | Paper jam inside of machine Paper jam at the bottom of duplex path |
| Causes: | Paper jam has occurred inside the machine. |
| Remedy: | • M2–1114 : The paper has not left from the feed sensor within the specified time. • M2-1117 : The paper passed duplex path has not reached the feed sensor within the specified time. 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute the feed 1 sensor test. b) Check connection between the feed 1 sensor and main board. c) If the connection is OK, replace the feed 1 sensor. d) If the feed 1 sensor is normal, check the feed motor. e) Execute feed motor test. f) Check if the feed motor cable is connected correctly. g) If the connection is OK, replace the feed/MP drive unit. |
| Error code: | M2-1211, M2-1213, M2-1214 |
| Display: | Paper jam inside of machine. |
| Description: | Paper jam inside of machine. |
| Causes: | Paper jam has occurred inside the machine. (Regi. roller drive is defective / Regi. sensor is defective.) • M2–1211 : When the machine is warming-up, jammed paper inside machine is detected. • M2–1213 : The leading edge of the paper has not reached the regi. sensor within the specified time. • M2-1214 : The paper has not left from the regi. sensor within the specified time. |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If jammed paper occurs continually, check the following. a) Enter SVC mode. Execute Regi. motor test. If the motor operation is normal, go to step d). b) Remove the rear cover. Check if the Regi/MP motor cable is connected correctly. c) If the connection is OK, replace the Regi./MP drive unit(JC93-00443A). d) If the motor operation is normal, check the regi. sensor. e) If the sensor operation is abnormal, check the harness. f) If the connection is OK, replace the regi. sensor (0604-001381). |
| Error code: | M2-1331, M2-1332 |
| Description: | Paper jam inside of machine Paper jam at the top of duplex path |
| Causes: | Paper jam has occurred inside the machine. |
| Remedy: | • M2-1331 : Paper is detected by the fuser out JAM sensor. • M2-1332 : Paper has not reached the fuser out JAM sensor within the specified time. • M2-1333 : Paper escaped from Regi sensor has reached to the fuser out JAM sensor faster than the specified time. • M2–1334 : The paper has not left from the fuser out JAM sensor within the specified time. 1) Open the side cover. Remove jammed paper. 2) If the problem persists, check the followings: a) Enter SVC mode, execute the fuser out sensor test. i) If the sensor does not work, check below. • Check the harness connection between fuser out sensor and main board. • If the harness connection is OK, replace the fuser out sensor. ii) If the sensor works normally, check the Regi/OPC/Fuser/Exit drive unit at SVC mode. • Check the harness connection of Regi/OPC/Fuser/Exit drive unit. • If the harness connection is OK, replace the corresponding drive unit. (Regi/OPC drive is applied in case M2–1332) |
| Error code: | M2-1333, M2-1334 |
| Description: | Paper jam inside of machine Paper jam at the top of duplex path |
| Causes: | Paper jam has occurred inside the machine. |
| Remedy: | • M2-1331 : Paper is detected by the fuser out JAM sensor. • M2-1332 : Paper has not reached the fuser out JAM sensor within the specified time. • M2-1333 : Paper escaped from Regi sensor has reached to the fuser out JAM sensor faster than the specified time. • M2–1334 : The paper has not left from the fuser out JAM sensor within the specified time. 1) Open the side cover. Remove jammed paper. 2) If the problem persists, check the followings: a) Enter SVC mode, execute the fuser out sensor test. i) If the sensor does not work, check below. • Check the harness connection between fuser out sensor and main board. • If the harness connection is OK, replace the fuser out sensor. ii) If the sensor works normally, check the Regi/OPC/Fuser/Exit drive unit at SVC mode. • Check the harness connection of Regi/OPC/Fuser/Exit drive unit. • If the harness connection is OK, replace the corresponding drive unit. (Regi/OPC drive is applied in case M2–1332) |
| Error code: | M2-2111, M2-2112, M2-2113 |
| Description: | Paper jam inside of machine Paper jam at the top of duplex path |
| Causes: | Paper jam has occurred in duplex path. |
| Remedy: | 1) Open the side cover. Remove jammed paper. 2) If the problem persists, check the following: a) Enter SVC mode. Execute the Duplex1/Duplex2 sensor test. i) If the sensor does not work, check the followings. • Check the harness connection between Duplex1/Duplex2 sensor and main board. • If the harness connection is OK, replace the Duplex1/Duplex2 sensor. ii) If the sensor works normally, check the 2nd Exit/Duplex1/Duplex2 drive unit at SVC mode. • Check the harness connection of 2nd Exit/Duplex1/Duplex2 drive unit • If the harness connection is OK, replace the corresponding drive unit. |
| Error code: | M2-2114, M2-2311 |
| Description: | Paper jam inside of machine Paper jam at the top of duplex path |
| Causes: | Paper jam has occurred in duplex path. |
| Remedy: | 1) Open the side cover. Remove jammed paper. 2) If the problem persists, check the following: a) Enter SVC mode. Execute the Duplex1/Duplex2 sensor test. i) If the sensor does not work, check the followings. • Check the harness connection between Duplex1/Duplex2 sensor and main board. • If the harness connection is OK, replace the Duplex1/Duplex2 sensor. ii) If the sensor works normally, check the 2nd Exit/Duplex1/Duplex2 drive unit at SVC mode. • Check the harness connection of 2nd Exit/Duplex1/Duplex2 drive unit • If the harness connection is OK, replace the corresponding drive unit. |
| Error code: | M2-2312, M2-2314 |
| Description: | Paper jam inside of machine Paper jam at the top of duplex path |
| Causes: | Paper jam has occurred in duplex path. |
| Remedy: | 1) Open the side cover. Remove jammed paper. 2) If the problem persists, check the following: a) Enter SVC mode. Execute the Duplex1/Duplex2 sensor test. i) If the sensor does not work, check the followings. • Check the harness connection between Duplex1/Duplex2 sensor and main board. • If the harness connection is OK, replace the Duplex1/Duplex2 sensor. ii) If the sensor works normally, check the 2nd Exit/Duplex1/Duplex2 drive unit at SVC mode. • Check the harness connection of 2nd Exit/Duplex1/Duplex2 drive unit • If the harness connection is OK, replace the corresponding drive unit. |
| Error code: | M3-1411, M3-1412 |
| Description: | Paper jam in exit area. Check whether the pieces of paper remain in the paper path |
| Causes: | Paper jam has occurred around the fuser unit.(Job separator connection is defective. / Actuator-Exit is defective.) |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If the problem persists, check the following: a) Remove the exit unit. b) Check if the return sensor is connected correctly. If the connection is OK, replace the sensor. c) Check if the return sensor actuator is broken or deformed. If necessary, reassemble or replace it. d) Check if the exit gate solenoid connected correctly. If the connection is OK, replace the solenoid. e) If the problem persists, replace the fuser unit. |
| Error code: | M3-1413, M3-1414 |
| Display: | Paper jam in exit area. |
| Description: | Paper jam has occurred around the fuser unit.(Job separator connection is defective. / Actuator-Exit is defective.) |
| Causes: | Paper jam has occurred around the fuser unit.(Job separator connection is defective. / Actuator-Exit is defective.) |
| Remedy: | 1) Open the side cover. Remove the jammed paper. 2) If the problem persists, check the following. a) Open the side cover. Check if the connector is connected properly. b) Remove the JOB-SEPARATOR. Check if the photo sensor is assembled correctly. c) Check if ACTUATOR-EXIT is assembled correctly. If the ACTUATOR-EXIT (JC66-02533A) is deformed or broken, replace it. d) If the photo sensor(0604-001393) is defective, replace it. |
| Error code: | M3-2230, M3-2430 |
| Display: | Output tray is full. Remove printed media. |
| Description: | Output tray is full. Remove printed media. |
| Causes: | There is too much paper in output bin tray or inner tray. • M3-2230 : There is too much paper in output bin tray. • M3-2430 : There is too much paper in inner tray. |
| Remedy: | 1) Remove the paper from output bin tray or inner tray. 2) If this error ccurs continually, check the following. a) Check if the bin-full sensor and actuator is assembled correctly. b) Check if the bin-full sensor(0604–001393) is defective. |
| Error code: | S1-1113 |
| Display: | Video System Failure #S1-1113: Turn off then on. |
| Description: | Video System Failure #S1-1113: Turn off then on. |
| Causes: | The system has some problems due to CPU overheating. |
| Remedy: | 1) Turn the machine off. 2) Wait until the machine is cool, and then turn the machine on. 3) If the problem persists, turn the machine off again. 4) Remove the rear cover. 5) Replace the main board(JC92-02742A). 6) Assemble the rear cover. Turn the machine on. |
| Error code: | S1-1313 |
| Display: | The clock became initial time. Set a time again. |
| Description: | The clock became initial time. Set a time again. |
| Causes: | Saved time is invalid |
| Remedy: | 1) Set up the time and reboot the machine. a) Select “Machine Setup” on touch screen. b) Select “General Setting”. c) Select “Date and Time” and set the time. 2) If the problem persists, check the following. a) Remove the rear cover. b) Remove the fax holder from the main board. c) Measure the voltage of the battery. If the battery is normal, the measured value is over 3V. 3) If the battery is normal, replace the main board(JC92-02742A). |
| Error code: | S1-1411, S1-1413 |
| Display: | Video System Failure #S1-1411: Turn off then on. Video System Failure #S1-1413: Turn off then on. |
| Description: | SPGPv4-Chip is not working. |
| Causes: | Video chip in main board is defective. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, replace the main board(JC92-02452A). |
| Error code: | S1-2111 |
| Display: | Video System Failure #S1-2111: Turn off then on. |
| Description: | Video System Failure #S1-2111: Turn off then on. |
| Causes: | The machine can’t detect memory during booting. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Remove the rear cover. 4) Replace the main board(JC92-02742A). NOTE Insert the MSOK to the new main board. 5) Assemble the rear cover. Turn the machine on. |
| Error code: | S1-2433, S1-2443, S1-2444 |
| Description: | HDD System Failure #S1-2433: Turn off then on. HDD System Failure #S1-2443: Turn off then on. HDD System Failure #S1-2444: Turn off then on. |
| Causes: | HDD partition is full or corrupted. |
| Remedy: | 1) Enter SVC mode. Select “System Recovery” in Service Function menu. 2) Execute hard disk format and firmware re-installation. 3) If the problem persists, replace the HDD(JC59–00035A). |
| Error code: | S1-2434, S1-2435, S1-2436 |
| Description: | HDD Error #S1-2434. Check users guide. HDD Error #S1-2435. Check users guide. HDD Error #S1-2436. Check users guide. |
| Causes: | HDD partition or memory is full. • S1-2434 : Addresses in Address book / User data in User profile • S1-2435 : Documents in Document box / Jobs in Secure job list / Fonts / Forms • S1-2436 : System Logs • S1-2437/3438/3439 : Printing Error / No Paper in Tray |
| Remedy: | 1) Enter SVC mode. Select “Hard Disk Maintenance” in Service Function menu. 2) Execute hard disk format. 3) If the problem persists, replace the HDD(JC59–00035A). |
| Error code: | S1-2437, S1-2438, S1-2439 |
| Description: | HDD Error #S1-2437. Check users guide. HDD Error #S1-2438. Check users guide. HDD Error #S1-2439. Check users guide. |
| Causes: | HDD partition or memory is full. • S1-2434 : Addresses in Address book / User data in User profile • S1-2435 : Documents in Document box / Jobs in Secure job list / Fonts / Forms • S1-2436 : System Logs • S1-2437/3438/3439 : Printing Error / No Paper in Tray |
| Remedy: | 1) Enter SVC mode. Select “Hard Disk Maintenance” in Service Function menu. 2) Execute hard disk format. 3) If the problem persists, replace the HDD(JC59–00035A). |
| Error code: | S1-2445, S1-2446, S1-2447 |
| Description: | HDD System Failure #S1-2445: Turn off then on. HDD System Failure #S1-2446: Turn off then on. HDD System Failure #S1-2447: Turn off then on. |
| Causes: | HDD partition is full or corrupted. |
| Remedy: | 1) Enter SVC mode. Select “System Recovery” in Service Function menu. 2) Execute hard disk format and firmware re-installation. 3) If the problem persists, replace the HDD(JC59–00035A). |
| Error code: | S1-2448, S1-2449 |
| Description: | HDD System Failure #S1-2448: Turn off then on. HDD System Failure #S1-2449: Turn off then on. |
| Causes: | HDD partition is full or corrupted. |
| Remedy: | 1) Enter SVC mode. Select “System Recovery” in Service Function menu. 2) Execute hard disk format and firmware re-installation. 3) If the problem persists, replace the HDD(JC59–00035A). |
| Error code: | S1-2510, S1-2521 |
| Description: | MSOK System Failure #S1-2510: Turn off then on. MSOK Failure: #S1-2521. Call for service |
| Causes: | MSOK is not installed properly. / MSOK is defective. |
| Remedy: | 1) Remove the rear cover. 2) Check if the MSOK is inserted correctly. Remove and reinstall it. 3) If the problem persists, replace the main board. |
| Error code: | S1-3110 |
| Description: | Video System Failure #S1-3110: Turn off then on. |
| Causes: | The main board is defective. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Replace the main board(JC92-02742A). 4) Turn the machine on. |
| Error code: | S1-4111 |
| Display: | Video System Failure #S1-4111: Turn off then on. |
| Description: | Video System Failure #S1-4111: Turn off then on. |
| Causes: | The main board can’t send the data through the network channel. |
| Remedy: | 1) Check if the green LED of the network port is on. 2) If not, unplug and reconnect the network cable. 3) If the problem persists, replace the main board(JC92-02742A). |
| Error code: | S1-4311 |
| Display: | Video System Failure #S1-4311: Turn off then on. |
| Description: | Video System Failure #S1-4311: Turn off then on. |
| Causes: | The USB device chip is defective. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Replace the OPE hub board. 4) Turn the machine on. |
| Error code: | S1-5521 |
| Display: | FDI device is not installed. Install the device. |
| Description: | The machine can’t detect the FDI device. |
| Causes: | FDI device was removed. |
| Remedy: | 1) Install the FDI device. 2) If the FDI device is already installed, update the firmware for main board. 3) Check the connection between FDI device and main board. a) Remove the rear cover. b) Check the connection between FDI unit and mainboard connection. 4) If FDI unit has problem, replace FDI unit(CLX-KIT10). 5) If the problem persists, replace the main board(JC92-02452A). |
| Error code: | S2-1211, S2-2311, S2-3110 |
| Description: | Engine System Failure: #S2-1211. Turn off then on Engine System Failure: #S2-2311. Turn off then on Engine System Failure: #S2-3110. Turn off then on |
| Causes: | The main board is defective. • Power chip error • EEPROM detection error • Communication error |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, turn the machine off again. 3) Replace the main board(JC92-02742A). 4) Turn the machine on. |
| Error code: | S2-3114 |
| Display: | Engine System Failure #S2-3114: Turn off then on. |
| Description: | Engine System Failure #S2-3114: Turn off then on. |
| Causes: | ACR error has occurred. |
| Remedy: | 1) Execute “ACR calibration” manually. (Machine Setup > General Settings > Image Management > Auto Color Registration) 2) Clean the ACR sensor. 3) If the problem persists, replace the main board(JC92-02742A). |
| Error code: | S2-33xx, S2-34xx |
| Description: | Wait delay time for lower fixing temperature… Supplying and mixing toner to xxxx developer unit. Please wait… Calibrating xxxx image density. Please wait... |
| Causes: | These error show the engine status. |
| Remedy: | 1) Wait until error will be disappeared. |
| Error code: | S2-4210 |
| Display: | Front door is open. Close it. |
| Description: | Front door is open. Close it. |
| Causes: | Front cover or Side cover is opened. |
| Remedy: | 1) Close the front cover correctly. 2) Check if the cover open sensor connector is connected properly. Reconnect it. 3) If the sensor is defective, replace it. |
| Error code: | S2-4410 |
| Display: | Right door is open. Close it. |
| Description: | Right door is open. Close it. |
| Causes: | Front cover or Side cover is opened. |
| Remedy: | 1) Close the side cover correctly. 2) Check if the cover open sensor connector is connected properly. Reconnect it. 3) If the sensor is defective, replace it. |
| Error code: | S2-5111, S2-5112, S2-5120 |
| Description: | Failed to adjust the color registration |
| Causes: | ACR execution is failed. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, check the followings. • Check if the ACR sensor is contaminated or defective. Clean the ACR sensor or replace it. • Remove and reinstall the ITB unit. If the problem persists, replace the ITB unit. |
| Error code: | S2-5131, S2-5132, S2-5133 |
| Description: | Failed to adjust the color registration |
| Causes: | ACR execution is failed. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, check the followings. • Check if the ACR sensor is contaminated or defective. Clean the ACR sensor or replace it. • Remove and reinstall the ITB unit. If the problem persists, replace the ITB unit. |
| Error code: | S2-5135, S2-5136, S2-5161 |
| Description: | Failed to adjust the color registration |
| Causes: | ACR execution is failed. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, check the followings. • Check if the ACR sensor is contaminated or defective. Clean the ACR sensor or replace it. • Remove and reinstall the ITB unit. If the problem persists, replace the ITB unit. |
| Error code: | S2-5164, S2-5210, S2-5240 |
| Description: | Failed to adjust the color registration |
| Causes: | ACR execution is failed. |
| Remedy: | 1) Turn the machine off then on. 2) If the problem persists, check the followings. • Check if the ACR sensor is contaminated or defective. Clean the ACR sensor or replace it. • Remove and reinstall the ITB unit. If the problem persists, replace the ITB unit. |
| Error code: | S3-3121 |
| Display: | Scanner Locked |
| Description: | CIS unit in the scanner does not move. |
| Causes: | Scanner lock error has occurred. CIS does not move. |
| Remedy: | 1) Check if the CIS unit moves when turning the machine off then on. 2) Check if the CIS cable is connected correctly. Reconnect it. 3) If the CIS unit is defective, replace it. 4) Check if there is any defective part in the scanner. Find and replace it. 5) If the problem persists, replace the main board. |
| Error code: | S3-3211 |
| Display: | Scan System Failure #S3-3211: Turn off then on. |
| Description: | Scan System Failure #S3-3211: Turn off then on. |
| Causes: | ADF is not connected or communication error occurs with CIP6 board. |
| Remedy: | 1) Turn the machine off then on. If the problem persists, check the following: 2) Turn the machine off again. 3) Remove the scan rear cover. Check if the connector on scan joint board is connected correctly. 4) Remove the ADF rear cover. Check if the connector on ADF board is connected correctly. 5) If the connection is OK, replace the ADF board. |
| Error code: | S4-3131 |
| Description: | There has been a problem with fax modem card(Line 1). Install again. Call for service if the problem persists |
| Causes: | 1st Fax card is not installed properly. / Fax card is defective. |
| Remedy: | 1) Remove and reinstall the 1st fax card. 2) If the 1st fax card is defective, replace it. |
| Error code: | S4-3132 |
| Description: | There has been a problem with fax modem card(Line 1). Install again. Call for service if the problem persists |
| Causes: | 2nd Fax card is not installed properly. / Fax card is defective. |
| Remedy: | 1) Remove and reinstall the 2nd fax card. 2) If the 2nd fax card is defective, replace it. |
| Error code: | S5-311x |
| Description: | UI System Failure #S5-311x:Turn off then on. |
| Causes: | USB connection between main board and OPE has some problem. • S5-3111 : The UI can display messages, but data communication with the video/main board is unavailable. NOTE S5-3114~3117 are the sub errors of the S5-3111. These occurs with S5-3111. - S5-3114 : USB hub controller on Main Board is not working - S5-3115 : There is a USB hub board, but the board can’t be recognized. - S5-3116 : System can recognize USB hub board but, it can’t recognize OPE(UI Board) through USB. - S5-3117 : Bad USB device is connected then it can’t recognize OPE(UI Board). Status: WIFI or NFC option kit connects through usb • S5-3112 : The video board cannot communicate with the UI board. • S5-3113 : A critical error where the set malfunctions due to a problem in HDD may occur. |
| Remedy: | 1) Turn off and turn on. And check if the problem disappears. a) If yes, go to step 2)-a). b) If no, go to step 2)-b). 2) Check the following procedure. a) Print the Error Information Report. . Service Mode - General - Print Reports - Error Information . Check the error code which is printed on the report. - If S5-3111 has occurred, go to step 4). - If S5-3112 has occurred, go to step 5)-c). - If S5-3113 has occurred, go to step 5)-d). b) Enter into System Recovery Mode. • How to enter System Recovery Mode : Turn on the machine with side cover open and power button on OPE is pressed state. • Check if entering System Recovery Mode is possible or not. - If entering System Recovery Mode is successful, go to step 3). - If entering System Recovery Mode fails, go to step 5)-c). 3) Execute the System Recovery. • Insert USB memory stick which has recovery one rom and execute recovery(HDD format). • Check if the problem disappears after system recovery(format complete). - If yes, go to step 4). - If no, go to step 5)-d). 4) Execute the firmware update. • Check if the problem disappears after one rom update. - If the problem disappears, go to step 5)-a). - If the problem happens sometimes, go to step 5)-b). 5) Check the following procedure. a) No more action is required because machine is recovered from S5-3111 error state. Please monitor the machine if S5-3111 happens again. b) Detailed analysis is required. Please capture the log and send it to development team in HQ. c) It seems that there is some critical issue in the USB connection between main board and OPE. Please try below steps. i) If WiFi module is installed, replace WiFi module with new one. ii) Check USB cable state between main board and OPE. iii) Replace the main board with new one. iv) Replace the OPE board with new one. d) It seems that HDD or main board has some problem. Please replace HDD or main board with new one and check if the problem disappears. |
| Error code: | S6-3113, S6-3122 |
| Description: | Network Failure: #S6-3113. Turn off then on. Call for service if the problem persists Network cable is disconnected. Check it. |
| Causes: | Network PHY chip is defective./ Network cable is disconnected. |
| Remedy: | 1) Check if the green LED of the network port is on. 2) If not, unplug and reconnect the network cable. 3) If the problem persists, replace the main board. |
| Error code: | S6-3114 |
| Description: | Network Failure: #S6-3114. Turn off then on. Call for service if the problem persists Network cable is disconnected. Check it. |
| Causes: | Network chip is defective. |
| Remedy: | 1) Check the network cable connection. a) Remove and reconnect the network cable. b) Check if the network port LED is on. 2) Reinstall the network kit. 3) If the problem persists, replace the network kit. 4) If the problem persists, replace the main board. |
| Error code: | S6-3123, S6-3128 |
| Display: | This IP address conflicts with that of other system. Check it. 802.1x authentication failed. Please Contact the System Administrator. |
| Description: | Network Problem: IP Conflict 802.1x Network Error |
| Causes: | IP address conflicts with that of other system. |
| Remedy: | 1) Change the machine’s IP address. 2) Check the setting-up for 802.1x confirmation server. |
| Error code: | S7-2110 |
| Display: | Fuser Failure: #S7-2110. Turn off then on |
| Description: | Fuser Failure: #S7-2110. Turn off then on |
| Causes: | Heater control relay is abnormal. |
| Remedy: | 1) Turn the machine off. Re-install the fuser unit, then turn the machine on. 2) If the problem persists, replace the Fuser unit(110V : JC91-01158A, 220V : JC91-01157A). |
| Error code: | U1-2115 |
| Display: | Fuser Unit Failure: #U1-2115. Turn off then on. |
| Description: | Fuser Unit Failure: #U1-2115. Turn off then on. |
| Causes: | The pressure control unit(Cam unit)of the fuser is abnormal. |
| Remedy: | 1) Turn the machine off then open the side cover. 2) Remove and re-install the fuser unit, then turn the machine on. 3) If the problem persists, check the following : a) When the side-cover closes, check if the operation sound of the pressure control unit occurs. b) Check if the parts of the pressure control unit are abnormal. - Check if the shape of the CAM-REAR(JC66-03299A)) is broken. - Check if there are abnormal parts of the pressure control unit. c) Check if the fuser-motor is abnormal via SVC mode. 4) If the problem persists, replace the Fuser unit(110V : JC91-01158A, 220V : JC91-01157A). 5) If the problem persists, replace the pressure control unit or cam-motor or Main board(JC92-02742A). |
| Error code: | U1-2xxx |
| Description: | Fuser Unit Failure: #U1-2xxx Turn off then on |
| Causes: | The thermistor can’t measure temperature. The hear-roller will not heat-up. / Temperature of the fuser increases abnormally. |
| Remedy: | 1) Remove the fuser unit. After opening the jam cover, check if jammed or wrapped paper is in the fuser unit. 2) Re-install the fuser unit, then turn the machine on. 3) If the problem persists, check the following : a) Check if the Halogen lamp (110V : 4713-001630 / 220V : 4713–001631) is broken or disconnected. b) Check if the AC connection of the Halogen lamp is disconnected or contaminated. c) Check if the thermostat(4712-001098) is disconnected. d) Check if the non-contact type thermistor(1404–001453)is broken. 4) If the problem persists, replace the Fuser unit(110V : JC91-01158A, 220V : JC91-01157A). 5) If the problem persists, replace the Main board(JC92-02742A) or FDB board(110V : JC44-00210A, 220V : JC44-00211A), SMPS(110V : JC44-00093C, 220V : JC44-00100C) |
| Error code: | U2-2113, U2-3114 |
| Description: | Yellow LSU Failure: #U2-2113. Turn off then on Magenta LSU Failure: #U2-3114. Turn off then on |
| Causes: | Hsync signal of the LSU is abnormal. |
| Remedy: | 1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up. 2) Print a demo page to check that the machine operates normally. 3) If the problem persists, check the following : a) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. Print a demo page to check that the machine operates normally. b) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable on main board. Print a demo page to check that the machine operates normally. c) If the LSU cable is defective, replace it. Check that the LSU motor makes a sound after turning the machine on. d) If the problem persists, replace the LSU. |
| Error code: | U2-4113, U2-5113 |
| Description: | Cyan LSU Failure: #U2-4113. Turn off then on Black LSU Failure: #U2-5113. Please turn off then on |
| Causes: | Hsync signal of the LSU is abnormal. |
| Remedy: | 1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up. 2) Print a demo page to check that the machine operates normally. 3) If the problem persists, check the following : a) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. Print a demo page to check that the machine operates normally. b) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable on main board. Print a demo page to check that the machine operates normally. c) If the LSU cable is defective, replace it. Check that the LSU motor makes a sound after turning the machine on. d) If the problem persists, replace the LSU. |
| Error code: | U2-6120, U2-6121 |
| Description: | LSU Failure: #U2-612x. Please turn off then on |
| Causes: | LSU motor does not operate or it operates abnormally. Motor ready signal is abnormal. |
| Remedy: | 1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up. 2) Print a demo page to check that the machine operates normally. 3) If the problem persists, check the following : a) If the LSU motor makes a sound, i) Enter SVC mode to check the LSU motor ready signal. ( Diagnostics > Engine Diagnostics > Engine Test Routines) ii) Select “LSU Motor1 Run Ready”. ( Diagnostics > Engine Diagnostics > Engine Test Routines > 110-0000) iii) Press ‘Start’ button. Check that the status has changed to ‘Executing -> Low -> High’. iv) If the status has not changed, the motor ready signal is abnormal. Replace the LSU. b) If the LSU motor does not makes a sound, i) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. Check that the LSU motor make a sound after turning the machine on. ii) Turn the machine off and remove the rear cover. Unplug and reconnect the LSU cable on main board. Check that the LSU motor make a sound after turning the machine on. iii) If the LSU cable is defective, replace it. Check that the LSU motor make a sound after turning the machine on. iv) If the problem persists, replace the LSU. |
| Error code: | U2-6122, U2-6123 |
| Description: | LSU Failure: #U2-xxxx. Please turn off then on |
| Causes: | LSU Motor does not work normally or LSU H Sync signal is abnormal. |
| Remedy: | 1) Execute the LSU motor test in SVC mode. Check LSU motor operation sound. 2) If there is no sound, remove the right cover. Check if the LSU harness is connected on the main board properly. 3) If it is OK, remove the top cover. Check if the LSU harness is connected on LSU board properly. 4) Check if the LSU harness is defective. 5) Reconnect the LSU harness and then execute the LSU motor test again. 6) If the problem persists, replace the LSU. 7) If the problem persists after replacing LSU, replace the main board. |
| Error code: | U2-7110, U2-7111, U2-7112 |
| Description: | LSU Failure: #U2-711x. Turn off then on |
| Causes: | Temperature sensor of the LSU is abnormal. |
| Remedy: | 1) Turn the machine off then on. Check for the LSU motor operation sound during warm-up. 2) Print a demo page to check that the machine operates normally. 3) If the problem persists, check the following : a) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable. Print a demo page to check that the machine operates normally. b) Turn the machine off and open the side cover. Unplug and reconnect the LSU cable on main board. Print a demo page to check that the machine operates normally. c) If the LSU cable is defective, replace it. Check that the LSU motor makes a sound after turning the machine on. d) If the problem persists, replace the LSU. |
| Error code: | U3-3111, U3-3113, U3-3114 |
| Description: | Original paper jam inside of scanner |
| Causes: | Jam has occurred inside the DSDF unit. |
| Remedy: | 1) Find and remove the jammed paper. 2) If this error occurs continually, remove 4 screws and the upper cover. 3) Check the Pick-up Position Sensor(0604–001393) and Pick-up Feed Sensor(0604–001381) connection. 4) Check if the black sheet from the bottom of the pick up feed sensor is attached properly. If it is contaminated, clean it. 5) If the sensor is defective, replace it. |
| Error code: | U3-3122 |
| Description: | Documents are inserted incorrectly. After open the scanner`s door, put it again. Call for service if the problem persists |
| Causes: | DSDF pick up module has the problem. |
| Remedy: | 1) Open and close the DSDF cover. Check if the error message is disappeared. 2) Open the DSDF cover. Push and release the pick up module. Check if the pick up module returns the original position. • Check if the spring is deformed. If the spring is defective, replace it(6107–003581). 3) Check If the regi sensor is OK, check the scan sensor and scan actuator. If their operation is abnormal, replace the defective part. |
| Error code: | U3-3211, U3-3213, U3-3214 |
| Display: | U3-3211, U3-3213, U3-3214, U3-3311, U3-3313, U3-3314 Original paper jam / Original paper jam inside of scanner. Remove jam |
| Description: | Original paper jam inside of scanner |
| Causes: | Jam has occurred inside the DSDF unit. |
| Remedy: | 1) Open the DSDF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the Regi. sensor and Regi actuator. Push and release the regi actuator. Check if the pick up module returns the original position. If the sensor is defective, replace it(0604–001393). 3) If the regi sensor is OK, check the scan 1 sensor and reflect film. • If the scan 1 sensor is defective, replace it(0604–001381). • If the reflect film is contaminated, clean it. |
| Error code: | U3-3311, U3-3313, U3-3314 |
| Display: | U3-3211, U3-3213, U3-3214, U3-3311, U3-3313, U3-3314 Original paper jam / Original paper jam inside of scanner. Remove jam |
| Description: | Original paper jam inside of scanner |
| Causes: | Jam has occurred inside the DSDF unit. |
| Remedy: | 1) Open the DSDF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the Regi. sensor and Regi actuator. Push and release the regi actuator. Check if the pick up module returns the original position. If the sensor is defective, replace it(0604–001393). 3) If the regi sensor is OK, check the scan 1 sensor and reflect film. • If the scan 1 sensor is defective, replace it(0604–001381). • If the reflect film is contaminated, clean it. |
| Error code: | U3-3511, U3-3513, U3-3514 |
| Display: | Original paper jam inside of scanner. |
| Description: | Original paper jam inside of scanner. |
| Causes: | Jam has occurred inside the DSDF unit. |
| Remedy: | 1) Open the DSDF cover. If there is jammed paper, remove it. 2) If this error occurs continually, check the Regi. sensor and Regi actuator. Push and release the regi actuator. Check if the pick up module returns the original position. If the sensor is defective, replace it. 3) If the regi sensor is OK, check the scan 2 sensor and exit sensor. • If the scan 2 sensor is defective, replace it. • If the exit sensor is defective, replace it. |
| Error code: | U3-3511, U3-3613, U3-3614 |
| Description: | Original paper jam in the exit area of scanner |
| Causes: | Jam has occurred in exit area of the DSDF unit. |
| Remedy: | 1) Find and remove the jammed paper. 2) If this error occurs continually, push the locking lever and pull down the Scan Out. 3) Check the Scan Out sensor and Exit sensor. If the sensor is defective, replace it(0604–001381). |
| Error code: | U3-3611, U3-3613, U3-3614 |
| Description: | Original paper jam in the exit area of scanner |
| Causes: | Jam has occurred in exit area of the DSDF unit. |
| Remedy: | 1) Open the DSDF cover. If there is jammed paper, remove it. 2) If the regi sensor is OK, check the scan 2 sensor and exit sensor. • If the scan 2 sensor is defective, replace it. • If the exit sensor is defective, replace it. |
| Error code: | U3-3611, U3-361, U3-3614 |
| Description: | Original paper jam in the exit area of scanner |
| Causes: | Jam has occurred in exit area of the DSDF unit. |
| Remedy: | 1) Find and remove the jammed paper. 2) If this error occurs continually, push the locking lever and pull down the Scan Out. 3) Check the Scan Out sensor and Exit sensor. If the sensor is defective, replace it(0604–001381). |
| Error code: | U3-4210 |
| Display: | Top door of scanner is open. |
| Description: | Top door of scanner is open. |
| Causes: | DSDF cover is open. |
| Remedy: | 1) Open and close the DSDF cover. Check if the error message is disappeared. 2) If the problem persists, check the cover open sensor. a) Open the DSDF cover. Remove the spring. b) Remove 4 screws. c) Check if the sensor connector is connected correctly. If the sensor is defective, replace it(0604–001393). |
